The GE 90-70 series PLC systems deliver trusted legacy automation solutions. These controllers support modular expansion and provide reliable operation for older industrial installations, ensuring continuity and reduced downtime.
GE 90-70 Scrics PLC
-
General Electric GE IC697ACC701 Series 90-70 Lithium Backup Battery
Product Description The IC697ACC701 by GE Fanuc is a 3-volt lithium battery designed to maintain critical CPU functions in Series 90‑70 PLC systems, including models IC697CPU731, CPU771, and CPU772. It preserves user memory, the real-time clock (RTC), and calendar functions during power interruptions or system shutdowns, ensuring uninterrupted operation and data integrity. This battery is mounted inside the CPU module, typically in pairs, and features a tool-free snap-in design for fast, safe replacement without specialized tools. Technical Specifications Electrical Characteristics Battery Type: Single-cell Lithium Nominal Voltage: 3 VDC Capacity: 1400–1500 mAh Pulse Current: 250 mA Continuous Current: 15 mA Memory and Clock Support Memory Retention: Approximately 6 months without external power RTC/Calendar Backup: Supported Low Battery Indication: CPU “Module OK” LED turns off Environmental Parameters Operating Temperature: –40°C to +80°C (–40°F to +176°F) Shelf Life: 10 years at ~20°C with low self-discharge chemistry Mechanical Data Diameter: 0.48 in Height: 2.38 in Weight: 1.45 kg Connector: Wire-lead with secure contact Installation: Tool-free snap-in design, two batteries per CPU required Compatibility GE Fanuc Series 90‑70 CPUs Supports IC697CPU731, CPU771, CPU772 Replaces IC697-ACC-701 and CR12600SE-GE batteries VME Supported Applications Memory and RTC backup for PLC CPUs Continuous industrial process control Critical data retention in manufacturing systems FAQ Q: How long does the battery maintain CPU memory without external power?A: The IC697ACC701 retains memory for approximately six months. Q: Can the battery be replaced without shutting down the CPU?A: Yes, its snap-in design allows replacement while maintaining CPU integrity, but always install the new battery before removing the old one. Q: Which CPU models are compatible with this battery?A: It supports Series 90‑70 CPUs including IC697CPU731, CPU771, and CPU772.
$200.00 $100.00
-
General Electric GE Fanuc IC697MDL241 Series 90-70 16-Point AC Input Module
Product Description The IC697MDL241 is a 16-channel AC input module engineered for the GE Fanuc Series 90-70 PLC system. It monitors discrete 120 VAC signals from field devices such as push buttons, limit switches, and sensors, providing accurate and reliable input status to the PLC controller. Designed for industrial environments, the IC697MDL241 features optical isolation between field wiring and the backplane to safeguard the PLC from electrical noise and voltage spikes. Each channel is equipped with a dedicated LED for immediate visual status verification, simplifying commissioning and troubleshooting. Its compact design allows installation in any Series 90-70 I/O slot, enabling flexible system integration. Technical Specifications Specification Details Model IC697MDL241 Product Type Discrete AC Input Module Series Series 90-70 PLC Input Channels 16 Nominal Voltage 120 VAC On-State Voltage Range 85–132 VAC Off-State Voltage Range 0–30 VAC Input Current ~10 mA at rated voltage On-State Current Minimum 6 mA Off-State Current Maximum 2 mA Response Time On: ~25 ms; Off: ~25 ms Isolation Optical isolation from PLC backplane Indicators 16 green LEDs (one per input) Mounting Fits any Series 90-70 I/O slot Operating Temperature 0°C to +60°C Storage Temperature -40°C to +85°C Weight 1.25 lbs Key Features AC Input Compatibility: Supports standard 120 VAC discrete signals. Channel Status LEDs: Individual LEDs for rapid diagnostics. Optical Isolation: Protects backplane from surges and electrical noise. Flexible Installation: Can be installed in any Series 90-70 I/O slot. Industrial Durability: Designed for reliable operation in harsh environments. Applications Monitoring AC-powered push buttons, limit switches, and sensors. Integration into Series 90-70 PLC systems for manufacturing lines. Process control and industrial machinery requiring reliable AC input detection. Situations where fast diagnostics and system protection are critical. FAQ Q: How many input channels does IC697MDL241 provide?A: 16 discrete AC input channels. Q: Does it include visual indicators for each input?A: Yes, each channel has a dedicated green LED. Q: Can it be installed in any I/O slot?A: Yes, compatible with all Series 90-70 I/O slots. Q: What protection does it provide for the PLC?A: Optical isolation safeguards the PLC backplane from electrical noise and voltage surges.
$200.00 $100.00
-
General Electric GE Fanuc IC697ACC722 I/O Terminal Block
Product Description The IC697ACC722 is a high-density I/O terminal block designed for the GE Fanuc Series 90-70 PLC system, providing a secure interface between field devices and PLC modules. With 48 screw-type terminals, this module simplifies wiring, ensures vibration-resistant connections, and organizes multiple discrete and analog signals in a compact footprint. Engineered for industrial-grade reliability, the IC697ACC722 supports standard wiring sizes, offers electrical isolation between field wiring and the PLC backplane, and allows easy installation directly onto 90-70 I/O modules. This accessory is ideal for large-scale automation systems, process control, and manufacturing environments where efficient and maintainable wiring is critical. Technical Specifications Specification Details Model IC697ACC722 Product Type I/O Terminal Block (Accessory) Series Series 90-70 PLC Terminal Type Screw-type connections Number of Terminals 48 connection points Mounting Direct attachment to Series 90-70 I/O modules Wiring Capacity Standard industrial wiring sizes supported Isolation Provides electrical isolation from PLC backplane Dimensions Compact for rack installation Compatibility Works with GE Fanuc 90-70 PLC I/O modules Durability Industrial-grade construction for long-term reliability Weight 0.44 lbs Slot Restrictions Cannot be installed in Slot 1 of any rack; compatible with Slots 2–8 in 9-slot racks and 2–4 in 5-slot racks Key Features High-density wiring: 48 terminals provide a compact and organized connection interface. Secure screw terminals: Reliable and vibration-resistant connections for field devices. Simplified maintenance: Structured wiring reduces troubleshooting time. Electrical isolation: Protects PLC backplane from voltage spikes and interference. Industrial durability: Built to withstand harsh automation environments. Applications Organizing discrete and analog signal wiring for Series 90-70 PLC systems. Manufacturing plants requiring multiple field device connections. Process industries and energy systems with high wiring density needs. Any automation system requiring reliable and maintainable I/O connections. FAQ Q: How many connection points does IC697ACC722 provide?A: 48 screw-type terminals. Q: Can it handle both analog and discrete signals?A: Yes, it is compatible with both types of field wiring. Q: Which slots in the rack are compatible for installation?A: Slots 2–8 in 9-slot racks and 2–4 in 5-slot racks; slot 1 is not supported. Q: Does it provide isolation between field wiring and PLC backplane?A: Yes, electrical isolation is built into the design.
$200.00 $100.00
-
General Electric GE Fanuc IC697PWR713 Series 90-70 PLC Power Supply Module
Product Description The IC697PWR713 is a high-performance power supply module for the GE Fanuc Series 90-70 PLC system. It converts AC input into regulated DC voltages, supplying stable power to the PLC backplane and all installed modules. Designed for demanding industrial environments, this module supports large PLC configurations, ensures reliable operation under heavy loads, and incorporates comprehensive protection features. Technical Specifications Specification Details Model IC697PWR713 Product Type Power Supply Module Series Series 90-70 PLC Input Voltage 90–264 VAC (auto-ranging), 100–150 VDC Frequency 47–63 Hz Output Voltages +5 VDC, +12 VDC, -12 VDC Output Current +5 VDC up to 50 A; ±12 VDC up to 3 A Output Power 100 W maximum across all outputs Power Factor >0.93 Cooling Forced air with internal fan Protection Overvoltage, overcurrent, and thermal safeguards Indicators LED status for power and fault conditions Mounting Fits Series 90-70 PLC rack power supply slot Operating Temperature 0°C to +60°C Storage Temperature -40°C to +85°C Dimensions 200 × 80 × 40 mm Weight 1.81 kg Key Features High current output supports extensive PLC systems with multiple modules. Provides multiple regulated voltages: +5 VDC for logic circuits and ±12 VDC for analog and communication devices. Built-in protection against overload, overvoltage, and excessive temperature. Internal fan ensures consistent cooling under continuous heavy operation. LED indicators provide visual confirmation of power status and faults. Compact form factor for easy integration into 90-70 PLC racks. Applications Powering CPU, I/O, and communication modules in large-scale PLC racks. Industrial process control systems, manufacturing plants, and energy management applications. Environments requiring robust, continuous, and regulated DC power supply for PLC operation. FAQ Q: What AC input range does IC697PWR713 support?A: It supports 90–264 VAC or 100–150 VDC input. Q: What are the output voltages and capacities?A: +5 VDC up to 50 A, ±12 VDC up to 3 A. Q: Does it have protection features?A: Yes, it includes overvoltage, overcurrent, and thermal protection. Q: Can it operate in high-temperature environments?A: It operates reliably from 0°C to +60°C and can be stored from -40°C to +85°C. Q: What are typical use cases?A: Large industrial automation systems requiring stable and high-capacity DC power.
$200.00 $100.00
-
General Electric GE IC697ACC724 Series 90‑70 Rack-Mounted Cooling Fan
Product Description The IC697ACC724 is a dedicated rack-mounted fan assembly engineered for GE Fanuc Series 90‑70 PLC systems. Designed to maintain optimal airflow in high-density racks containing CPUs, power supplies, and I/O modules, this fan assembly prevents overheating, prolongs component lifespan, and ensures stable operation under harsh industrial conditions. The unit mounts directly to the bottom of the PLC rack and channels cool air from below while exhausting warm air through module slots. Depending on revision, the assembly contains two or three integrated fans to optimize airflow, complemented by a polyurethane foam filter to reduce dust accumulation. Its compact, rugged construction supports continuous operation even in elevated ambient temperatures. Technical Specifications Parameter Specification Manufacturer GE Fanuc / Emerson Model IC697ACC724 Product Type Rack-Mounted Cooling Fan PLC Compatibility Series 90‑70 Operating Voltage 230–240 VAC Power Consumption 16–17 W Line Current 0.09–0.10 A Locked Rotor Current 0.12–0.14 A Cooling Method Forced convection airflow Nominal Airflow 71 CFM Number of Fans 2 (standard), 3 (optional revision) Filter Type Polyurethane foam, 30 PPI Operating Temperature –28 °C to +70 °C Mounting Position Bottom of PLC rack Housing Industrial-grade with integrated power leads Retainer & Guard UL94V‑0 plastic Dimensions 331 × 150 × 60 mm Weight 3.00 lbs Key Features & Advantages Maintains consistent airflow to prevent thermal stress in high-density PLC racks Dual-fan redundancy ensures cooling continues if one fan fails Optional three-fan configuration for enhanced performance in high-heat applications Foam filter minimizes dust buildup and prolongs fan life Direct rack integration simplifies installation—no external brackets required Supports industrial environments with elevated ambient temperatures Low power consumption relative to cooling capacity Applications Cooling of Series 90‑70 PLC CPU racks and I/O modules Industrial control cabinets with high-density electronics Environments requiring reliable, continuous airflow under elevated temperatures Hazardous or dusty industrial locations requiring dust filtration FAQ Q: Can the IC697ACC724 operate with a failed fan?A: Yes, the dual-fan design provides redundancy to maintain airflow if one fan stops. Q: Is this compatible with all Series 90‑70 racks?A: The assembly is designed for standard Series 90‑70 PLC racks and mounts directly to the bottom. Q: Does it include a filter?A: Yes, a polyurethane foam filter is included to reduce dust accumulation.
$200.00 $100.00
-
General Electric GE Fanuc IC697PCM711 Programmable Coprocessor Module Series 90-70
Product Description The IC697PCM711 is a dedicated programmable coprocessor module engineered for the GE Fanuc Series 90-70 PLC platform. It is intended to execute computation-intensive or time-sensitive tasks independently of the main CPU, improving overall system responsiveness and determinism. Built around an Intel 80C186 processor running at 12 MHz, the module provides substantial local processing capability and supports concurrent task execution. A user-developed MegaBasic application can run in parallel with communication services, making it suitable for advanced data handling, operator interface logic, and custom control strategies. The module communicates with the host PLC via the backplane and operates autonomously once deployed, without requiring continuous CPU intervention. Multiple modules can be installed within the same rack for distributed processing architectures. Key Features Dedicated coprocessor for offloading PLC CPU tasks Intel 80C186 processor at 12 MHz Dual-task execution: user application and communication handling MegaBasic programming environment for flexible development Two configurable serial ports (RS-232 / RS-422 / RS-485) Battery-backed memory for data retention Front-panel control buttons for reset and restart Supports multiple modules per system Technical Specifications Processor & Performance CPU: Intel 80C186 Clock Speed: 12 MHz Processing Capability: Comparable to legacy industrial PC-class performance Tasking: Dual-tasking (application + communication) Memory Onboard Memory: Up to 96 KB CMOS (battery-backed) Expansion Options: 64 KB (IC697MEM713) 128 KB (IC697MEM715) 256 KB (IC697MEM717) 512 KB (IC697MEM719) Battery Type: Lithium Shelf Life: Approx. 10 years at 20 °C Data Retention: Up to 6 months without external power Communication Interfaces Ports: 2 serial communication ports Electrical Interface: RS-232 / RS-422 / RS-485 (configurable) Baud Rates: Up to 9.6 kbps (dual-port operation) Up to 19.2 kbps (single port) Protocol: CCM2 Programming & Configuration Programming Language: MegaBasic Development Tools: IC647 PCM Development System, IC640 software Platform: IBM-compatible PC (XT/AT class) Configuration: Software-based (no hardware switches) Indicators & Controls LEDs: OK, USER 1, USER 2 Pushbuttons: Application restart Module stop/reset Electrical & Mechanical Backplane Current: 1.0 A @ 5 VDC Slot Requirement: Single slot Weight: 1.1 lbs Environmental Designed for industrial cabinet installation Long-term memory retention supported by battery backup Functional Capabilities The IC697PCM711 operates independently from the PLC CPU and can execute: Real-time mathematical processing Data acquisition and buffering Serial communication management Operator interface logic Data logging and storage Custom algorithm execution Applications High-speed data processing in PLC systems Protocol conversion and serial communications Operator interface and supervisory functions Complex algorithm execution beyond standard PLC capability Distributed processing in large automation systems FAQ Q: Does the IC697PCM711 reduce CPU load?A: Yes, it offloads computation and communication tasks, allowing the main PLC CPU to focus on core control logic. Q: Can multiple PCM modules be used in one rack?A: Yes, multiple units can operate in the same system for scalable processing. Q: How is application logic developed?A: Using MegaBasic with GE Fanuc PCM development tools on a compatible PC. Q: What happens if power is lost?A: Battery-backed memory preserves application data for several months without power.
$200.00 $100.00
-
General Electric GE Fanuc IC697PWR724 Series 90-70 24VDC Power Supply
Product Description The IC697PWR724 is a rack-mounted 24 VDC power supply tailored for GE Fanuc Series 90‑70 PLC systems. Designed for installation in the leftmost slot of the PLC rack, it provides regulated DC power and logic-level sequencing signals to all connected modules. With a total output of 90 W, the IC697PWR724 can support a single rack or two interconnected racks using the IC697CBL700 cable, provided the combined load does not exceed its rated capacity. The unit features electronic overcurrent and overvoltage protection, as well as a 10 ms ride-through to maintain stability during short power interruptions. Its slide-in design simplifies installation and maintenance without requiring full rack disassembly. Technical Specifications Electrical Input Nominal Input Voltage: 24 VDC Input Voltage Range: 18–32 VDC Maximum Input Power: 160 W at full load DC Output Ratings +5 VDC: Up to 18 A (main logic supply) +12 VDC: Up to 1.5 A (I/O & specialty modules) –12 VDC: Up to 1 A (analog/specialty modules) Total Output Power: 90 W Protection & Reliability Overcurrent protection on +5 V bus Overvoltage protection 10 ms ride-through on loss of input power Supports dual-rack operation with IC697CBL700 cable Mechanical & Installation Mounting: Leftmost slot in Series 90‑70 PLC rack Backplane Connector: 48-pin Installation Type: Slide-in module Dimensions: 200 × 60 × 145.5 mm Weight: 2.47 lbs Environmental Ratings Operating Temperature: 0 °C to +60 °C Storage Temperature: –25 °C to +70 °C Protection Class: IP20 Key Features 24 VDC input, 90 W regulated output for Series 90‑70 PLC racks Supplies +5 V, +12 V, –12 V to logic and I/O modules Compatible with single or dual rack configurations Electronic overcurrent and overvoltage protection 10 ms ride-through ensures stable power under transient events Slide-in design for easy installation and maintenance Applications Ideal for powering single or multiple Series 90‑70 PLC racks in industrial automation, process control, and distributed control systems where stable DC power and module sequencing are critical. FAQ Q: Can this power supply support two racks simultaneously?A: Yes, using IC697CBL700, as long as the total load does not exceed 90 W. Q: Is the module hot-swappable?A: No, the supply must be installed or removed with power off. Q: What protection features are included?A: Overcurrent and overvoltage protection plus 10 ms ride-through capability. Q: Where should the module be installed in the rack?A: Always in the leftmost slot of the Series 90‑70 rack.
$200.00 $100.00
-
General Electric GE Fanuc IC697CHS782 Series 90-70 17 Slot VME Rack
Product Description The IC697CHS782 is a VME-based rack chassis engineered for the GE Fanuc Series 90-70 PLC platform. It serves as a hybrid integration backplane, enabling the installation of both IC697 control modules and industry-standard VMEbus cards within the same system. This makes it suitable for applications where PLC control must coexist with high-performance computing or third-party interface modules. Its 17-slot architecture, combined with a VME-compliant backplane, provides flexibility for system expansion while maintaining deterministic communication across modules. The chassis is designed for enclosure mounting and supports both standard convection cooling and optional forced-air configurations for higher power densities. Technical Specifications General Information Model: IC697CHS782 Manufacturer: GE Fanuc / Emerson Series: Series 90-70 Product Type: VME Integrator Rack Mounting: Rear panel or enclosure mounting Weight: 5.8 kg Rack Configuration Total capacity: 17 single-width slots Alternative layout: supports double-width module configurations with dedicated power supply position Slot pitch: 0.8 in (20.32 mm) center spacing Backplane: IEEE 1014 VMEbus compliant Addressing: configurable slot addressing via backplane settings Module Compatibility Fully compatible with GE IC697 PLC modules Supports third-party VMEbus modules for hybrid architectures Suitable for mixed control, communication, and data acquisition systems Electrical Characteristics Backplane power distribution: +5 VDC, +12 VDC, –12 VDC, and ground Typical current demand: up to ~20 A at 5 VDC (fully populated, depends on module mix) Power supply: external or rack-mounted IC697 series power supply required Supported power supply models: IC697PWR711, IC697PWR748, IC697PWR749 Cooling & Thermal Design Default cooling: natural convection Optional cooling: field-installable fan tray for high thermal loads Installation note: maintain airflow clearance for stable operation Mechanical Characteristics Construction: industrial-grade steel chassis Dimensions: 483 mm (W) × 283 mm (H) × 185 mm (D) Grounding: integrated bottom rail for cable shielding and EMI control Mounting orientation: supports vertical or horizontal installation depending on enclosure design Environmental Conditions Operating temperature: 0 °C to 60 °C Storage temperature: –40 °C to +85 °C Humidity: 5–95% non-condensing System Integration Multi-rack expansion supported via interconnect cables (9-pin interface) Requires configuration of backplane jumpers for addressing and system layout Designed for deterministic communication in distributed PLC systems Key Features 17-slot high-density rack for Series 90-70 systems VMEbus-compliant backplane for hybrid PLC and VME integration Flexible module support including third-party VME devices Robust steel enclosure for industrial environments Scalable architecture with multi-rack expansion capability Convection cooling with optional forced-air upgrade Applications This rack is commonly used in complex automation systems where PLC control must interface with high-speed data processing or specialized VME hardware. Typical use cases include power generation control systems, large-scale manufacturing lines, test systems, and legacy system upgrades requiring VME compatibility. FAQ Q: Can this rack be used with non-GE modules?A: Yes, it supports standard VMEbus modules in addition to GE IC697 PLC modules. Q: Is a power supply included with the rack?A: No, a compatible IC697 series power supply must be installed separately. Q: Does the rack support high-power configurations?A: Yes, but an optional fan assembly is recommended when using high-power modules. Q: Can multiple racks be connected in one system?A: Yes, multi-rack configurations are supported using appropriate expansion cables.
$200.00 $100.00
-
General Electric GE Fanuc IC697CHS770 Series 90-70 PLC 9-Slot Rack Chassis
Product Description The IC697CHS770 is a robust 9-slot rack designed for the GE Fanuc Series 90-70 PLC family. It serves as the central housing for CPUs, power supplies, I/O, and communication modules, providing both mechanical support and high-speed electrical interconnection. This chassis features a rugged aluminum construction, suitable for harsh industrial environments, and accommodates up to two complete PLC systems per rack. The backplane ensures reliable, high-speed communication between installed modules, while the design allows flexible panel or cabinet mounting. Its 9-slot configuration supports scalable system architectures, making it ideal for medium to large automation applications. Technical Specifications Feature Specification Model IC697CHS770 Manufacturer GE Fanuc / Emerson Series Series 90-70 PLC Module Type Rack / Chassis Number of Slots 9 slots Supported Modules CPU, I/O, communication, specialty modules Backplane High-speed interconnection bus for module communication Power Supply Compatible with Series 90-70 power supply modules Construction Rugged aluminum chassis Mounting Options Panel or cabinet mounting Operating Temperature 0°C to +60°C Dimensions Standard Series 90-70 rack size, ~19-inch width Weight 20 lbs Key Features & Benefits Scalable Configuration: 9 slots accommodate CPU, I/O, and communication modules.Reliable Backplane: High-speed interconnection ensures stable communication between modules.Industrial Durability: Aluminum chassis provides rugged protection for long-term operation.Flexible Installation: Suitable for both panel and cabinet mounting.High System Capacity: Supports multiple racks and large automation projects. Applications Central housing for Series 90-70 PLC modules Medium-to-large industrial process control systems Machine control and automation system expansion High-reliability environments requiring multiple PLC systems FAQ Q: How many slots does the IC697CHS770 provide?A: The chassis includes 9 module slots for CPU, I/O, and communication modules. Q: Can it host multiple PLC systems?A: Yes, it can support up to 2 complete PLC systems per rack. Q: What mounting options are available?A: Suitable for both panel and cabinet installations. Q: Is it compatible with all Series 90-70 modules?A: Yes, it supports CPU, I/O, communication, and specialty modules designed for Series 90-70.
$200.00 $100.00
-
General Electric GE Fanuc IC697MDL654 Series 90-70 PLC 32-Point DC Output Module
Product Description The IC697MDL654 is a high-density discrete output module designed for the GE Fanuc Series 90-70 PLC platform. It provides reliable DC output points capable of driving solenoids, relays, lamps, and other field devices in industrial and process control applications. This single-slot module delivers 32 positive logic outputs with a nominal voltage of 24 VDC, supporting up to 0.5 A per point and a maximum total module current of 16 A. Outputs are opto-isolated to ensure immunity against electrical noise, and the module is organized into four isolated groups of 8 points each for safe and flexible wiring. Two 20-pin connectors facilitate field connections, while LED indicators provide visual status for operational monitoring. Designed for industrial reliability, the IC697MDL654 supports continuous operation under harsh conditions and is compatible with proximity switches, positive/negative logic devices, and standard Series 90-70 racks. Technical Specifications Feature Specification Model IC697MDL654 Manufacturer GE Fanuc / Emerson Series Series 90-70 PLC Module Type Discrete Output Module Output Voltage 24 VDC nominal (operational 33–56 VDC) Number of Outputs 32 discrete points Logic Type Positive/Negative logic compatible Output Current 0.5 A per point, 16 A max per module Isolation Opto-isolated outputs, 1500 VDC isolation voltage Field Connections 2 × 20-pin connectors Slot Requirement Single-slot module Operating Temperature 0°C to +60°C Weight 3.00 lbs Module Groups Four isolated groups of 8 points each Compatible Devices Solenoids, relays, lamps, proximity switches Dimensions Standard Series 90-70 rack size Key Features & Benefits High-Density Outputs: 32 points maximize rack efficiency for large I/O systems.Industrial Reliability: Rugged design ensures dependable operation in demanding environments.Opto-Isolated Protection: Noise immunity for stable output performance.Flexible Integration: Compatible with a wide range of DC field devices.Compact Design: Single-slot form factor fits directly into Series 90-70 racks. Applications Driving solenoids, relays, and DC actuators Machine control and process automation Integration with proximity switches and indicator lamps Medium-to-large PLC I/O expansion FAQ Q: Which PLC series is IC697MDL654 compatible with?A: Exclusively designed for GE Fanuc Series 90-70 PLCs. Q: What is the maximum output per point?A: Each output supports up to 0.5 A, with 16 A maximum for the entire module. Q: Is the module noise-protected?A: Yes, outputs are opto-isolated for electrical noise immunity. Q: How are outputs organized?A: Outputs are arranged in four isolated groups of 8 points each for flexible wiring.
$200.00 $100.00
-
General Electric GE Fanuc IC697CPU771 Series 90-70 PLC CPU Module
Product Description The IC697CPU771 is a robust central processing unit module for the GE Fanuc Series 90-70 PLC family. Designed to provide reliable processing, memory management, and communication capabilities, it is ideal for medium-to-large automation systems that demand stable and consistent performance. Equipped with an Intel 80386 (or 80C816DX) microprocessor, the IC697CPU771 operates at 12–20 MHz, delivering fast execution of ladder logic and advanced control programs. It supports up to 512 KB of battery-backed RAM for user programs and data storage, along with discrete and analog I/O memory for efficient system operation. The module includes built-in serial communication ports (RS-232/RS-485) for integration with supervisory systems, remote I/O, or other PLC modules. Its single-slot form factor fits standard Series 90-70 racks, with LED indicators for module status, RUN, and output enable, ensuring clear operational feedback. Technical Specifications Feature Specification Model IC697CPU771 Manufacturer GE Fanuc / Emerson Series Series 90-70 PLC Module Type CPU Module Processor Intel 80386 / 80C816DX, 12–20 MHz Memory 512 KB RAM (expandable, battery-backed) Discrete I/O Memory 2 KB Analog I/O Memory 8 KB Boolean Execution Speed 0.4 µs per function I/O Capacity Up to 2000 mixed I/O points per module Communication Ports RS-232, RS-485 serial interface Slot Requirement Single-slot CPU module Power Backup Lithium battery (IC697ACC701) for memory retention LED Indicators Module OK, RUN, Outputs Enabled Operating Temperature 0°C to +60°C Dimensions Standard Series 90-70 rack size Weight 1 lb Key Features & Benefits Reliable Processing: Fast CPU execution supports medium-to-large automation programs.Expandable Memory: 512 KB RAM with battery backup ensures user logic and data are preserved.Communication Ready: Built-in serial ports facilitate connection to supervisory systems and remote I/O.High I/O Support: Handles thousands of discrete and analog I/O points across multiple racks.Industrial Durability: Rugged design ensures long-term operation in demanding environments. Applications Machine control in manufacturing lines Process control in chemical, food, or packaging industries Integration in multi-rack Series 90-70 PLC systems Remote I/O and supervisory system interfacing FAQ Q: Which PLC series is IC697CPU771 compatible with?A: It is compatible exclusively with GE Fanuc Series 90-70 PLCs. Q: What is the maximum user program memory?A: Up to 512 KB of battery-backed RAM. Q: Does it include communication ports?A: Yes, it has RS-232 and RS-485 serial interfaces for PLC network integration. Q: Can it execute floating-point math operations?A: Yes, floating-point operations are fully supported.
$200.00 $100.00
-
General Electric GE Fanuc IC697MDL671 32-Point 48VDC Series 90-70 Input Module
Product Description The IC697MDL671 is a high-voltage discrete input module engineered for the GE Fanuc Series 90-70 PLC family. It offers 32 positive logic input points operating at 48 VDC, providing reliable digital signal acquisition from field devices such as pushbuttons, limit switches, and proximity sensors. Equipped with opto-isolated inputs, the IC697MDL671 delivers excellent noise immunity for stable operation in electrically noisy environments. It connects via two 20-pin field connectors and integrates seamlessly into standard Series 90-70 racks. The module is designed for high reliability and continuous operation in industrial applications. This module supports a wide range of input devices, making it suitable for machine control, process monitoring, and multi-rack PLC systems where higher voltage signal acquisition is required. Technical Specifications Feature Specification Model IC697MDL671 Manufacturer GE Fanuc / Emerson Module Type Discrete Input Module PLC Series Series 90-70 Input Voltage 48 VDC (Positive Logic) Input Points 32 Logic Type Positive logic (current flows when input is ON) Input Current Approx. 7 mA per point at 48 VDC Isolation Opto-isolated for noise immunity Response Time Typical 2 ms Field Connections Two 20-pin connectors Rack Compatibility Standard Series 90-70 racks Operating Temperature 0°C to +60°C Weight 0.79 kg Dimensions Standard Series 90-70 rack size Rated Voltage 24–48 VDC nominal Maximum Input Current 10 mA Isolation Voltage 1500 V ON-State Voltage 13.5–30 VDC OFF-State Voltage -3 to 5 VDC (positive), -5 to 30 VDC (negative) ON-State Current 6–15 mA OFF-State Current 0–2 mA Key Features & Benefits High-Density Inputs: 32 points maximize rack utilization.Electrical Noise Protection: Opto-isolation ensures reliable operation in industrial environments.Flexible Field Integration: Supports a variety of sensors and switches operating at higher voltage levels.Compact Design: Fits directly into Series 90-70 racks without additional hardware.Proven Reliability: Engineered for continuous industrial operation. Applications Signal acquisition from high-voltage DC field devices Machine control and process monitoring Multi-rack Series 90-70 PLC configurations Industrial systems requiring 48 VDC input logic FAQ Q: Is the IC697MDL671 compatible with 24 VDC input devices?A: While optimized for 48 VDC, the module may operate with lower voltage inputs, but performance and response times should be verified against device specifications. Q: What terminal or connectors are required for installation?A: The module connects through two standard 20-pin field connectors integrated into Series 90-70 racks. Q: Does this module require special firmware?A: No special firmware is required; it is compatible with standard Series 90-70 PLC firmware versions. Q: Can it be used in multi-rack PLC systems?A: Yes, the IC697MDL671 supports multi-rack configurations and remote I/O setups.
$200.00 $100.00
-
General Electric GE Fanuc IC697CPU781 Series 90-70 Single-Slot CPU Module
Product Description The IC697CPU781 is a robust CPU module for the GE Fanuc Series 90-70 PLC family, delivering reliable mid-range processing power, memory, and communication capabilities. Designed for medium-to-large industrial automation systems, it ensures stable operation for process control, machine management, and multi-rack configurations. Equipped with a 32-bit 80386DX processor running at 16 MHz, the IC697CPU781 includes 512 KB of RAM for user programs and data storage. The module supports multiple racks and thousands of I/O points, making it suitable for complex automation systems. It features built-in serial communication ports (RS-232/RS-485) for integration with supervisory systems and remote I/O modules. This single-slot CPU module can be programmed using MS-DOS or Windows-based GE Fanuc software, providing flexible configuration options. It is built for continuous industrial operation with an operating temperature range of 0°C to +60°C and standard Series 90-70 rack dimensions. Technical Specifications Feature Specification Model IC697CPU781 Manufacturer GE Fanuc / Emerson Module Type CPU Module PLC Series Series 90-70 Microprocessor 80386DX, 32-bit Clock Speed 16 MHz RAM 512 KB (expandable) Serial Ports RS-232/RS-485 I/O Capacity Supports multiple racks and thousands of points Slot Requirement Single-slot CPU module Operating Voltage 5 V DC Current Draw 1.6 Amps Operating Temperature 0°C to +60°C Weight 1.87 lbs Key Features & Benefits Reliable Performance: 16 MHz CPU provides consistent processing for medium-to-large automation tasks.Expandable Memory: 512 KB RAM supports user logic and data storage with upgrade options.Flexible Connectivity: Integrated RS-232/RS-485 ports allow communication with external devices.Scalable System Design: Supports multi-rack installations and remote I/O expansion.Durable Construction: Industrial-grade design ensures reliable operation in harsh environments. Applications Medium-to-large PLC systems with moderate CPU requirements Process automation and machine control Multi-rack and distributed I/O systems Industrial environments demanding stable CPU performance FAQ Q: Can this CPU module be used in Series 90-30 PLCs?A: No, the IC697CPU781 is compatible only with Series 90-70 PLC systems. Q: What is the maximum memory supported?A: The module includes 512 KB of RAM, expandable as needed for user programs. Q: How is this module programmed?A: Programming is supported through MS-DOS or Windows-based GE Fanuc software. Q: How many racks can this CPU support?A: The IC697CPU781 supports multiple racks and thousands of I/O points.
$200.00 $100.00
-
General Electric GE Fanuc IC697CPX782 Series 90-70 Mid-Range CPU Module
Product Description The IC697CPX782 is a mid-performance CPU module specifically designed for the GE Fanuc Series 90-70 PLC family. It delivers dependable processing power, moderate memory capacity, and flexible communication options, making it ideal for medium-to-large industrial control systems. Powered by a 32-bit 80486DX4 processor running at 96 MHz and equipped with 1 MB of RAM and 256 KB of non-volatile memory, the IC697CPX782 supports multiple racks and thousands of I/O points. The module features built-in serial communication ports (RS-232/RS-485), enabling integration with remote I/O, supervisory systems, and external devices. This single-slot CPU module supports ladder logic and advanced programming through GE Fanuc software, providing reliable performance for process control, machine automation, and multi-rack configurations. Operating temperatures range from 0°C to +60°C, with standard Series 90-70 rack dimensions for straightforward installation. Technical Specifications Feature Specification Model IC697CPX782 Manufacturer GE Fanuc / Emerson Module Type CPU Module PLC Series Series 90-70 Microprocessor 80486DX4, 32-bit Clock Speed 96 MHz RAM 1 MB for user programs and data Non-Volatile RAM 256 KB Communication Ports 3 Serial (RS-232/RS-485) I/O Capacity Supports multiple racks and thousands of points Slot Requirement Single-slot CPU module Operating Voltage 5 V DC Operating Temperature 0°C to +60°C Weight 2.0 lbs Key Features & Benefits Reliable Processing: 96 MHz CPU delivers stable performance for medium-to-large systems.Moderate Memory: 1 MB RAM plus 256 KB NVRAM supports substantial program logic and data storage.Scalable Design: Supports multi-rack configurations and remote I/O expansion.Flexible Connectivity: Serial ports enable communication with external devices and supervisory systems.Durable Build: Industrial-grade design ensures continuous operation under demanding conditions. Applications Medium-to-large PLC systems requiring reliable CPU performance Machine control and process automation Multi-rack and distributed I/O configurations Industrial environments where uptime and stability are critical FAQ Q: Can this module be used in Series 90-30 PLCs?A: No, the IC697CPX782 is designed exclusively for Series 90-70 PLC systems. Q: How much memory does it have?A: The module has 1 MB of RAM and 256 KB of non-volatile memory for user programs and data retention. Q: What programming languages are supported?A: Ladder Logic and advanced GE Fanuc software programming. Q: Is it compatible with multiple racks?A: Yes, the module supports multi-rack configurations and remote I/O expansion.
$200.00 $100.00
-
General Electric GE Fanuc IC697CPX928 Series 90-70 High-Performance CPU Module
Product Description The IC697CPX928 is a robust CPU module engineered for the GE Fanuc Series 90-70 PLC family. Designed for large-scale and mission-critical automation systems, this module combines advanced processing power with high memory capacity to support complex control applications and extensive I/O configurations. Equipped with a 32-bit microprocessor running at 96 MHz and 6 MB of RAM, the IC697CPX928 can manage up to 12,000 I/O points, including 8,000 analog points. It offers multiple communication options, including one RS-232 and two RS-485 serial ports, along with a dedicated factory reset port. Flash memory of 256 KB stores firmware and user programs, while the optional IC697ACC701 lithium battery preserves critical system data. This single-slot CPU module features high-speed Boolean scan rates (0.4 µs per function) and supports ladder logic, structured text, and advanced GE Fanuc programming software. It operates reliably from 0°C to +60°C and fits standard Series 90-70 racks, making it an ideal choice for complex industrial automation projects. Technical Specifications Feature Specification Model IC697CPX928 Manufacturer GE Fanuc / Emerson Module Type CPU Module PLC Series Series 90-70 Microprocessor 80486DX4, 32-bit floating point Clock Speed 96 MHz RAM 6 MB for user logic and data Flash Memory 256 KB I/O Capacity Up to 12K points (8K analog I/O) Communication Ports 1 × RS-232, 2 × RS-485, 1 × Factory Reset Battery Support IC697ACC701 lithium battery Slot Requirement Single-slot module Scan Rate 0.4 µs per Boolean function Operating Temperature 0°C to +60°C Weight 1.83 lbs Key Features & Benefits High-Speed Processing: 96 MHz CPU supports complex control and high I/O throughput.Large Memory Capacity: 6 MB RAM plus 256 KB flash memory ensures extensive program and data storage.Extensive I/O Handling: Supports up to 12,000 I/O points for multi-rack systems.Versatile Communication: Serial ports allow connection to remote racks, HMIs, and expansion modules.Reliable Design: Operates continuously in demanding industrial environments. Applications Large-scale PLC systems and distributed control networks Process control requiring high-speed logic and floating-point calculations Multi-rack automation configurations with extensive I/O Critical systems where reliability and uptime are essential FAQ Q: Can this CPU module be used in Series 90-30 PLCs?A: No, the IC697CPX928 is compatible only with Series 90-70 PLC systems. Q: What is the maximum I/O capacity?A: Supports up to 12,000 total I/O points, including 8,000 analog points. Q: Which programming languages are supported?A: Ladder Logic, Structured Text, and advanced GE Fanuc software programming. Q: Is a battery required?A: Optional IC697ACC701 lithium battery is recommended to retain critical data during power loss.
$200.00 $100.00
-
General Electric GE Fanuc IC697CMM711 Communication Coprocessor Module
Product Description The IC697CMM711 is a dedicated communications coprocessor designed for the GE Fanuc Series 90-70 PLC platform. It offloads communication tasks from the main CPU, enabling efficient data exchange between controllers, operator interfaces, and third-party devices. Equipped with its own onboard processor, this module independently manages serial communications, improving overall system responsiveness. It supports multiple industrial protocols and allows concurrent communication through two configurable serial ports, making it suitable for complex automation networks. Technical Specifications Parameter Description Model IC697CMM711 Manufacturer GE Fanuc Series 90-70 PLC Module Type Communications Coprocessor Module Processor 12 MHz Intel 80C186 Slot Requirement Single slot Serial Interfaces 2 configurable ports Port Types RS-232 / RS-422 / RS-485 Connector Type 25-pin D-sub (female) Supported Protocols SNP, SNP-X (Master/Slave); CCM (Master/Slave/Peer); Modbus RTU (Slave) Communication Speed 9.6 kbps / 19.2 kbps Status Indicators OK, PORT1, PORT2 LEDs Control Function Hardware pushbutton for communication reset Backplane Current 0.7 A @ 5 VDC Isolation Electrical isolation via serial interface design Operating Temperature -40°C to +70°C Mounting Series 90-70 rack baseplate Weight 1.12 lbs Core Functional Features The IC697CMM711 module enables reliable serial communication across heterogeneous systems. Its dual-port architecture allows simultaneous connections to multiple devices, while protocol flexibility ensures compatibility with both GE-native and third-party equipment. The onboard microprocessor handles communication independently, reducing CPU load and improving scan performance in large-scale control systems. LED diagnostics provide quick status monitoring for troubleshooting and maintenance. Application Scenarios This module is typically implemented in systems requiring structured data exchange and integration across multiple devices, including: PLC-to-PLC communication within distributed control architectures Interface with HMIs, SCADA systems, or industrial PCs Integration of Modbus RTU field devices such as drives and meters Legacy system expansion where serial communication remains essential FAQ Q: Can both serial ports operate at the same time?A: Yes, the module supports simultaneous communication on both ports with independent configuration. Q: Does the module support Modbus master mode?A: No, Modbus RTU is supported in slave mode only. Q: Is this module a replacement for Genius communication modules?A: No, it is a serial communication coprocessor and does not provide Genius bus functionality. Q: Does it require additional power or battery?A: No external battery is needed; it draws power directly from the PLC backplane.
$200.00 $100.00
-
General Electric GE Fanuc IC697MDL650 90-70 24V DC Digital Input Module
Product Description The IC697MDL650 by GE Fanuc is a high-density DC input module developed for the Series 90-70 PLC platform. It is intended for precise acquisition of digital field signals and seamless integration into large-scale control systems. This module operates using positive logic, making it suitable for sourcing-type input devices. With integrated optical isolation and input filtering, it ensures stable signal transmission even in electrically noisy industrial environments. Its rack-mounted design allows straightforward installation within existing 90-70 systems. Technical Specifications Parameter Description Model IC697MDL650 Manufacturer GE Fanuc Series 90-70 PLC Module Type DC Discrete Input Module Rated Voltage 24 VDC Logic Type Positive Logic Input Channels 32 discrete inputs Input Current Approx. 7 mA per channel Isolation Opto-isolated field and backplane Filtering Integrated noise filtering Field Wiring Grouped common terminals Installation Rack-mounted Operating Temperature -40°C to +70°C Storage Temperature -40°C to +85°C Dimensions 2.5 × 10.8 × 12.7 cm Weight 2.05 lbs Key Features The IC697MDL650 module provides reliable multi-point signal acquisition for demanding control systems. It supports a wide range of field devices including pushbuttons, selector switches, and proximity sensors. Optical isolation enhances system protection, while internal filtering reduces the impact of electrical noise. Its compact structure allows efficient use of rack space in high I/O density applications. Typical Applications This module is commonly used in industrial environments requiring consistent monitoring of discrete signals, such as automated production lines, conveyor systems, energy facilities, and process control systems. FAQ Q: What type of sensors are compatible with this module?A: It is designed for sourcing (PNP) devices, including proximity sensors and mechanical switches. Q: How many inputs does the module support?A: The module provides 32 discrete input channels. Q: Is it suitable for harsh environments?A: Yes, it operates reliably across a wide temperature range and includes noise suppression features. Q: Which PLC system is required?A: It is specifically designed for GE Fanuc Series 90-70 PLC racks.
$200.00 $100.00
-
General Electric GE Fanuc IC697CPM925 | Series 90-70 High-Performance CPU Module
Product Overview The IC697CPM925 is a high-performance central processing unit for the GE Fanuc Series 90-70 PLC platform. Engineered for large-scale automation systems, this CPU module delivers fast logic execution, extensive memory for complex programs, and multiple communication options. Its design supports continuous operation in demanding industrial environments while allowing scalable I/O expansion. Technical Specifications Feature Specification Model IC697CPM925 Series GE Fanuc Series 90-70 PLC Module Type Single-Slot CPU Module Processor Speed 25 MHz (64-bit floating-point capable) User Memory 1 MB RAM for program and data storage I/O Capacity Supports up to 12,000 discrete I/O points across multiple racks Communication Ports Built-in RS-232 and RS-485; expandable via Genius Bus or Ethernet modules Programming Languages Ladder Logic, Structured Text, and other Series 90-70 compatible languages Typical Scan Rate 0.2 ms per 1K Boolean logic contacts Dimensions 130 × 100 × 40 mm Weight 0.5 kg Operating Environment 0–60 °C, continuous operation Storage Temperature -40–85 °C Reliability Designed for high-duty industrial applications Key Features High Memory Capacity: 1 MB RAM enables complex logic programs and large-scale process management. Efficient Processing: 25 MHz CPU ensures rapid execution of control routines, suitable for multi-rack systems. Versatile Communication: Built-in serial ports and optional Genius Bus or Ethernet modules provide network flexibility. Scalable I/O Support: Handles extensive discrete and analog I/O across multiple racks for large automation setups. Industrial Reliability: Rugged design ensures consistent performance under continuous operation. Applications Manufacturing Automation: Control of large assembly lines, robotic cells, and automated packaging systems. Process Control: Monitoring and regulation of chemical, food, and pharmaceutical processing operations. Utilities: Power generation, water treatment, and HVAC systems integration. Material Handling: Distributed I/O management for conveyors and automated warehouses. FAQ Q: What is the memory specification of the IC697CPM925?A: The module features 1 MB of RAM, suitable for complex logic programs and large-scale applications. Q: Which communication interfaces are included?A: Built-in RS-232 and RS-485 ports; support for Genius Bus or Ethernet modules is available. Q: How many I/O points can this CPU manage?A: It supports up to 12,000 discrete I/O points across multiple racks. Q: What programming languages are supported?A: Compatible with Ladder Logic, Structured Text, and all Series 90-70 supported languages.
$200.00 $100.00
-
General Electric GE Fanuc IC697CHS791 | Series 90-70 9-Slot I/O Rack Module
Product Overview The IC697CHS791 is a 9-slot I/O rack (baseplate) designed for the GE Fanuc Series 90-70 PLC system. It provides a secure mechanical housing and a robust electrical backplane for CPUs, power supplies, and I/O modules. Engineered for modular expansion, it enables easy integration of PLC components while ensuring reliable communication and power distribution across all installed modules. Technical Specifications Feature Specification Model IC697CHS791 Series GE Fanuc Series 90-70 Module Type 9-Slot I/O Rack / Baseplate Number of Slots 9 slots for CPU, power supply, and I/O modules Backplane Type Embedded bus for communication and power distribution Mounting Horizontal or 19-inch front rack mounting Compatibility Supports all Series 90-70 CPU, power, I/O, and communication modules Dimensions 48 × 28 × 10 cm Weight 4.39 kg Construction Metal frame with plastic module guides for alignment Power Distribution Through installed power supply module via backplane Cooling Requirements Passive; no fan required I/O Bus Current Requirement 0.5 A maximum Mechanical Keying Supported for module alignment and safety Operating Temperature 0–40 °C Storage Temperature 0–50 °C Maximum Relative Humidity 80% non-condensing Maximum Operating Altitude 1000 meters above sea level Key Features Modular Design: Nine slots allow flexible system configuration and future expansion. Reliable Backplane Connectivity: Ensures seamless communication between CPU, power supply, and I/O modules. Durable Construction: Metal frame and plastic guides provide industrial-grade mechanical support. Easy Installation: Modules slide into guided slots with secure locking. Compatibility: Fully supports Series 90-70 PLC components including CPUs, I/O, and communication modules. Applications Manufacturing Lines: Houses PLC components controlling assembly lines, robotics, and automated machinery. Process Control: Provides distributed I/O for chemical, pharmaceutical, and food processing operations. Utility Systems: Supports water treatment, HVAC automation, and power distribution networks. Industrial Racks: Enables modular expansion with secure mounting and reliable backplane connectivity. FAQ Q: How many modules can this rack accommodate?A: The IC697CHS791 provides 9 slots for CPUs, power supplies, and I/O modules. Q: Does it require active cooling?A: No, the rack is designed for passive cooling; no fans are needed for standard operation. Q: Is it compatible with all Series 90-70 modules?A: Yes, it supports CPUs, power supplies, I/O modules, and communication modules within the Series 90-70 family. Q: What is the mounting method?A: It can be mounted horizontally or on a standard 19-inch front rack.
$200.00 $100.00
-
General Electric GE Fanuc IC697PWR711 High-Capacity Power Supply Module
Product Overview The IC697PWR711 is a high-capacity power supply module designed for GE Fanuc Series 90-70 PLC systems. It delivers stable, regulated DC power to the backplane and connected modules, ensuring reliable operation of CPUs, I/O, and communication devices. With auto-ranging AC input and multi-voltage outputs, this module is suitable for demanding industrial automation environments requiring robust and continuous power. Technical Specifications Feature Specification Model IC697PWR711 Series GE Fanuc Series 90-70 Module Type Power Supply Module Input Voltage 120/240 VAC (auto-ranging), 100–150 VDC Frequency 47–63 Hz Output Power 100 W maximum Output Voltages +5 VDC (logic), +12 VDC / -12 VDC (analog/communication) Backplane Current Capacity Up to 20 A at +5 VDC Isolation Input-to-output isolation for safety Rack Compatibility Standard IC697 PLC racks Dimensions 17 × 15 × 5 cm Weight 1.5 kg Key Features High Capacity: Supports large-scale PLC systems with up to 100 W output. Multi-Voltage Outputs: Provides +5 VDC for digital logic and ±12 VDC for analog or communication modules. Auto-Ranging Input: Works seamlessly with both 120 VAC and 240 VAC supplies without manual switching. Industrial-Grade Reliability: Designed for continuous operation in harsh industrial conditions. Safety Isolation: Input-to-output separation protects connected modules from electrical faults. Applications Manufacturing Automation: Powers Series 90-70 PLC racks for assembly lines, robotic systems, and material handling. Process Control: Ensures stable operation of controllers in chemical, food, and pharmaceutical industries. Utilities: Suitable for water treatment, power distribution, and HVAC system automation. Large-Scale PLC Systems: Ideal for distributed and multi-rack configurations requiring high-capacity power. FAQ Q: What input voltages does the IC697PWR711 support?A: It accepts 120/240 VAC (auto-ranging) or 100–150 VDC input. Q: What DC outputs are provided?A: +5 VDC for logic circuits and ±12 VDC for analog or communication modules. Q: How much current can it deliver to the backplane?A: Up to 20 A at +5 VDC. Q: Is this compatible with Series 90-30 PLCs?A: No, it is designed specifically for GE Fanuc Series 90-70 PLC racks.
$200.00 $100.00
-
General Electric GE IC697CPX935 Series 90-70 CPU Module
Product Description The GE IC697CPX935 is a high-capacity central processing unit designed for the GE Fanuc Series 90-70 PLC family. It serves as the core controller, executing complex automation programs, managing extensive I/O networks, and coordinating communications across large-scale industrial systems. Equipped with a 32-bit CPU and 2 MB of user memory (expandable), IC697CPX935 supports multitasking for simultaneous process control and logic execution. It provides serial and LAN connectivity for integration with supervisory systems, enabling reliable communication and data exchange in demanding automation environments. Integrated diagnostics, including LED indicators and self-test routines, facilitate quick troubleshooting and system monitoring. This module is ideal for legacy installations requiring a robust, reliable PLC CPU capable of managing thousands of I/O points and executing high-speed program logic. Technical Specifications Specification Details Model IC697CPX935 Series GE Fanuc Series 90-70 PLC Module Type CPU Module Processor 32-bit microprocessor User Memory 2 MB RAM, expandable Instruction Execution High-speed program processing I/O Capacity Supports thousands of I/O points via expansion racks Communication Ports Serial (RS-232/RS-485) and LAN interfaces depending on configuration Diagnostics Built-in self-test, fault reporting, LED indicators Compatibility Series 90-70 PLC systems Power Requirements 5 VDC, 3.1 A typical Scan Time Approximately 5.9 ms per typical program cycle Boolean Execution Speed 0.4 µs per instruction Temperature Range 0–50°C Key Features High-memory capacity for complex automation programs Supports multitasking for concurrent processes Multiple communication interfaces for network integration Scalable I/O with expansion rack support Built-in diagnostics for enhanced system reliability Compatible with existing Series 90-70 PLC installations Application Scenarios Process industries: Central control of chemical, oil & gas, or power plants Manufacturing: Supervisory control for multiple production lines Utility systems: Large-scale automation in water treatment and energy distribution Research & testing: High-speed logic execution for experimental setups FAQ Q: Can this CPU module handle large I/O networks?A: Yes, IC697CPX935 supports thousands of I/O points via compatible expansion racks. Q: What memory capacity is available?A: It comes with 2 MB of user RAM, expandable with Series 90-70 memory modules. Q: Which communication interfaces are supported?A: Serial (RS-232, RS-485) and LAN ports depending on configuration. Q: Is this module compatible with PACSystems RX3i CPUs?A: No, it is designed specifically for Series 90-70 PLC systems. RX3i CPUs offer modern Ethernet-based communication and higher performance.
$200.00 $100.00
-
General Electric GE IC697ALG230 Series 90-70 Analog Input Module
Product Description The GE IC697ALG230 is a precision analog input module for the Series 90-70 PLC family, engineered for high-resolution acquisition of voltage and current signals from sensors and transducers. This module provides accurate conversion of analog measurements into digital data for PLC processing, supporting up to 16 input channels in differential or single-ended configurations. Designed for legacy Series 90-70 installations, IC697ALG230 delivers stable, reliable operation with integrated diagnostics and robust channel-to-backplane isolation, ensuring signal integrity in electrically noisy environments. Its compact form factor allows seamless integration into standard 90-70 racks, making it ideal for industrial applications where precision measurement and high data fidelity are required. Technical Specifications Specification Details Model IC697ALG230 Series GE Fanuc Series 90-70 PLC Module Type Analog Input Module Channels 8 analog input channels (expandable with expander modules) Input Ranges Voltage: ±10 V (default), ±5 V, ±1 V, ±0.5 V, ±0.25 V, ±0.125 V; Current: 0–20 mA, 4–20 mA Resolution 16-bit (high precision), 12-bit optional Conversion Speed 2.4–2.8 ms per channel Linearity ±0.02% full scale Calibration Accuracy Voltage: ±0.01% FS, ±0.02% value; Current: ±0.05% FS, ±0.1% value Temperature Coefficient ±5 PPM/°C typical; voltage ±30 PPM/°C max Wiring Configuration Differential Diagnostics Built-in error detection and reporting Compatibility Series 90-70 PLC systems; compatible with IC697ALG440/441 expander modules Power Requirement 0.8 A (4 W) at +5 VDC Terminals 40-pin connection Weight 1.81 lbs Key Features Supports multiple voltage and current ranges for flexible analog acquisition High-resolution 16-bit conversion for precise measurement Channel-to-backplane isolation improves noise immunity Integrated diagnostics simplify troubleshooting Compact module fits standard Series 90-70 racks Compatible with analog expander modules for increased channel count Application Scenarios Process industries: Monitoring temperature, pressure, flow, and other analog signals Factory automation: Capturing precise machine feedback and sensor data Energy and utility systems: Measuring voltage and current in monitoring setups Research and test facilities: High-fidelity analog data acquisition FAQ Q: How many channels does this module support?A: Standard module supports 8 analog input channels, expandable via IC697ALG440/441 expander modules. Q: What accuracy can I expect for voltage measurements?A: Voltage measurements are accurate to ±0.01% full scale, ±0.02% of value. Q: Is this module compatible with modern PACSystems?A: It is designed for Series 90-70 PLCs; newer PACSystems RX3i/RX7i modules offer higher resolution and modern communication options. Q: How fast is the data acquisition?A: Typical update rate is 2.4–2.8 milliseconds per channel, with response times as low as 30 milliseconds for 5% deviation.
$200.00 $100.00
-
General Electric GE IC697CGR772 CPU Module High-Performance PLC Processor
Product Description The GE IC697CGR772 is a dual-bus CPU module engineered for the GE Fanuc Series 90-70 PLC family. Designed for large-scale industrial automation, this high-performance processor supports hot-standby operation, extensive memory, and advanced multitasking for complex control applications. It delivers reliable program execution across thousands of I/O points and integrates robust communication interfaces, making it ideal for demanding process and manufacturing environments. Equipped with a 32-bit 80486DX4 microprocessor running at 96 MHz, the IC697CGR772 provides fast Boolean execution (0.4 μs per function), precise floating-point calculations, and a scan time of approximately 5.9 ms. Its memory includes 512 KB CMOS RAM for program storage and support for up to 8,000 analog I/O points, ensuring high scalability. Dual communication ports (1 × RS-232, 2 × RS-485) with SNP protocol support facilitate integration into plant networks. Technical Specifications Specification Details Model IC697CGR772 Product Series GE Fanuc Series 90-70 Module Type CPU Module (Dual Bus, Hot-Standby) Processor 32-bit 80486DX4 Microprocessor Operating Frequency 96 MHz Boolean Execution 0.4 μs per function Memory 512 KB CMOS RAM (expandable) I/O Capacity 2,048 discrete inputs, 2,048 discrete outputs, 8,000 analog I/O memory points Scan Time 5.9 ms Floating Point Math Supported Discrete I/O 2,048 inputs / 2,048 outputs Analog I/O Memory 8,000 points Communication Ports 1 × RS-232, 2 × RS-485 Supported Protocols SNP Voltage 5 VDC Current 3.1 A Elapsed Time Clock Accuracy 0.01% max Operating Temperature 0–50°C Weight 1.75 lbs Key Features Hot-standby dual-bus CPU for redundancy and reliability High-speed processing for large and complex programs Multitasking for simultaneous control of multiple processes Supports thousands of I/O points via expansion racks Floating-point calculations and fast Boolean execution Integrated diagnostics and fault reporting for system reliability Scalable memory for advanced automation applications Application Scenarios Process industries: Central control of chemical, oil & gas, or power plants Manufacturing automation: Coordinating multiple production lines Utility systems: Supervisory control in water treatment or energy distribution Legacy systems: Replacement or upgrade for existing Series 90-70 PLC installations FAQ Q: What type of CPU is used in the IC697CGR772?A: It uses a 32-bit 80486DX4 microprocessor running at 96 MHz. Q: How much I/O can this CPU handle?A: Supports 2,048 discrete inputs, 2,048 discrete outputs, and up to 8,000 analog I/O memory points via expansion racks. Q: Can it perform floating-point calculations?A: Yes, floating-point math is fully supported. Q: What communication options are available?A: 1 × RS-232 and 2 × RS-485 ports with SNP protocol support. Q: Is this module still available?A: Yes, it is a legacy module, available new or refurbished through industrial suppliers.
$200.00 $100.00
-
General Electric GE IC697RCM711 Remote Control Module RCM
Overview The IC697RCM711 is a remote control module (RCM) designed for the Series 90‑70 PLC platform. It enables distributed I/O management by providing communication between CPUs and remote racks, allowing multiple racks to operate cohesively in large-scale automation systems. Technical Specifications Model/Part Number: IC697RCM711 Manufacturer: GE Fanuc (Emerson Automation Solutions) Series: Series 90‑70 PLC Module Type: Remote Control Module (RCM) Primary Function: Controls remote I/O racks Provides communication link between CPU and remote racks Communication Interface: Proprietary GE bus for Series 90‑70 I/O Capacity: Supports multiple remote racks with thousands of I/O points Serial Ports: 2 for connectivity and redundancy Slot Size: Single-slot installation Backplane Current Draw: ~0.7–1.2 A @ 5 VDC LED Indicators: 5 LEDs for status, communication, and fault detection Isolation: 1500 VAC field-to-ground for 1 minute Operating Temperature: 0–60 °C Storage Temperature: –40–85 °C Humidity Range: 5–95% non-condensing Weight: 0.93 lbs Key Features Enables remote rack control for distributed automation networks Redundant communication support for improved reliability Built-in diagnostics and LED indicators provide clear status feedback Scalable architecture supports expansion across multiple racks Industrial-grade design for harsh operating conditions Applications Linking remote I/O racks to a Series 90‑70 CPU Distributed control systems requiring scalable I/O solutions Environments where redundant communication and fault detection are critical FAQ Q: How many remote racks can this module support?A: Multiple remote racks can be connected, with total I/O points limited by CPU capacity. Q: What type of communication does it use?A: Proprietary GE bus interface designed for Series 90‑70 PLCs. Q: Can it operate in harsh conditions?A: Yes, it is rated for industrial environments with wide temperature and humidity ranges.
$200.00 $100.00
You have seen 24 out of 59 products