Siemens offers a wide range of industrial automation products for reliable process control. Its portfolio includes SIMATIC S5 and S7 PLC systems, I/O modules, and industrial controllers. Siemens technology ensures efficient, scalable, and long-term solutions for industrial automation across global industries.
8 in stock
Delivery within 48 hours, pay afterwards
Mid weeks Monday to friday we offer next day delivery if the product is on stock and exceptions on holidays.
Weekends We offer no deliveries in the weekends.
International Depending on where you’re located, we offer next day delivery. Check your status on this link
The Siemens 6ES5733-8CB00 is a dedicated interface cable engineered to facilitate communication between Simatic S5 programmable logic controllers and compatible programming devices. This 10-meter cable assembly is essential for performing system diagnostics, hardware configuration, and routine maintenance on legacy S5 automation platforms. Designed for demanding industrial environments, the cable ensures stable, high-integrity data transmission, helping to mitigate operational latency and support efficient troubleshooting in manufacturing facilities.Features
Reliable interface between Simatic S5 processors and PG programming hardware.
10-meter length provides flexibility for technicians to access controllers from outside high-voltage cabinet boundaries.
High-density braided shielding minimizes signal degradation caused by EMI and RFI in heavy industrial zones.
Robust connector housings equipped with mechanical retention screws to prevent disconnection due to vibration.
Constructed for durability in harsh factory settings, including chemical, steel, and automotive production environments.
Installation Guidelines
Ensure the PLC is in a safe state before connecting or disconnecting the programming cable.
Align the connector pins carefully with the PG port on the S5 module to avoid mechanical damage.
Tighten the integrated retention screws by hand to ensure a secure, vibration-resistant connection.
Route the cable away from high-current power lines or heavy motor cabling to reduce the risk of induced noise.
Avoid sharp bends or excessive tension on the cable to maintain the integrity of the internal shielding.
Technical Specifications
Brand
Siemens
Part Number
6ES5733-8CB00
Cable Length
10 meters
Application
Simatic S5 Programming
Operating Temperature
0 to 60 deg C
Shielding
Integrated braided EMI/RFI protection
FAQWhat is the primary function of the 6ES5733-8CB00?This cable is used to connect a Siemens Simatic S5 PLC to a programming unit, allowing for the upload, download, and monitoring of control programs.Can this cable be used in high-EMI environments?Yes, the cable features robust braided shielding designed to suppress electromagnetic and radio frequency interference typically found near industrial switchgear and motor drives.
8 in stock
Delivery within 48 hours, pay afterwards
Mid weeks Monday to friday we offer next day delivery if the product is on stock and exceptions on holidays.
Weekends We offer no deliveries in the weekends.
International Depending on where you’re located, we offer next day delivery. Check your status on this link
3 in stock
Delivery within 48 hours, pay afterwards
Mid weeks Monday to friday we offer next day delivery if the product is on stock and exceptions on holidays.
Weekends We offer no deliveries in the weekends.
International Depending on where you’re located, we offer next day delivery. Check your status on this link
DescriptionThe Siemens 6ES5948-3UA23 is a high-performance central processing unit designed for the Simatic S5-155U automation series. Engineered for demanding industrial environments, this CPU provides robust control for complex, time-critical automation tasks. With an integrated memory capacity of 1664 Kbytes, it supports sophisticated control algorithms, large-scale data block management, and intensive mathematical processing. It is frequently deployed in heavy-duty sectors including power generation, oil and gas, and large-scale manufacturing to ensure stable, deterministic control of multi-loop processes.Features
Integrated 1664 Kbyte memory for extensive program storage and system data.
Optimized for high-speed execution of boolean logic and floating-point math.
Supports high-speed hardware interrupts for immediate response to critical process events.
Seamless integration with the Simatic S5-155U backplane for rapid process image updates.
Designed for high-availability applications requiring reliable, continuous operation.
ApplicationsThis processor module is suitable for use in large-scale Simatic S5-155U rack systems. It is commonly utilized in applications requiring complex interlocks, high-speed data acquisition, and multi-loop control in industrial environments such as thermal power plants, refining facilities, and heavy mining infrastructure.Technical Specifications
Model
6ES5948-3UA23
Series
Siemens Simatic S5-155U
Total Memory
1664 Kbytes
Power Consumption
18 W (Typical)
Operating Temperature
0 to 55 deg C
Compatibility
Simatic S5-155U Rack Systems
Replacement Note
Direct replacement for legacy 6ES5948-3UA21
Installation Guidelines
Ensure the rack is powered down before inserting or removing the CPU module to prevent electrical damage.
Verify that the module is properly seated in the designated slot of the S5-155U chassis to ensure secure backplane contact.
Maintain proper ventilation in the control cabinet to keep ambient temperatures within the specified 0 to 55 deg C range.
Use shielded communication cabling for external interfaces to minimize EMI in high-noise industrial environments.
Handle with care to avoid electrostatic discharge (ESD) damage to the internal circuitry.
FAQDoes this CPU replace older models?Yes, the 6ES5948-3UA23 is designed to serve as a functional replacement for the legacy 6ES5948-3UA21 processor.What is the primary memory capacity of this unit?This processor features 1664 Kbytes of integrated memory, allowing for substantial user program code and data block storage.
3 in stock
Delivery within 48 hours, pay afterwards
Mid weeks Monday to friday we offer next day delivery if the product is on stock and exceptions on holidays.
Weekends We offer no deliveries in the weekends.
International Depending on where you’re located, we offer next day delivery. Check your status on this link
4 in stock
Delivery within 48 hours, pay afterwards
Mid weeks Monday to friday we offer next day delivery if the product is on stock and exceptions on holidays.
Weekends We offer no deliveries in the weekends.
International Depending on where you’re located, we offer next day delivery. Check your status on this link
The Siemens 6ES5721-0CB00 is a specialized 10-meter interconnect cable engineered for use within the Simatic S5 automation ecosystem. This robust assembly facilitates reliable communication between central control racks and remote expansion units. By maintaining a hardened physical layer, this cable supports the deterministic data exchange required for complex, distributed industrial control architectures, ensuring stable system performance even in demanding environments.Features
Designed for seamless integration with Siemens Simatic S5 central controllers and expansion units.
Total cable length of 10 meters for flexible cabinet-to-cabinet layout.
High-grade shielding construction to reduce electromagnetic interference (EMI) and cross-talk.
Equipped with durable, locking industrial connectors to prevent accidental disconnection and structural vibration impact.
Passive component requiring no external power supply for operation.
Supports extended system topologies when integrated into larger S5 configurations.
ApplicationsThis interconnect cable is frequently utilized in legacy industrial automation setups where distributed I/O and split-rack architectures are required. It is commonly found in large-scale manufacturing plants, power distribution stations, and heavy processing facilities where maintaining high-speed, synchronized communication between the CPU and expansion chassis is critical to operational safety and process control.Technical Specifications
Model
6ES5721-0CB00
Brand
Siemens
Cable Length
10 meters
Operating Temperature
0 to 60 deg C
Weight
1.4 kg
Power Consumption
Passive (0 W)
Application
Central Controller to Expansion Unit Link
Installation Guidelines
Ensure the system power is fully disconnected before attempting to install or remove the cable to prevent potential signal interference or damage.
Verify that the connector pins are clean and free of debris prior to mating with the expansion unit ports.
Secure the locking screws firmly to ensure a vibration-resistant connection; however, avoid over-torquing the screws to prevent damage to the connector housing.
Route the cable away from high-voltage power lines and heavy motor drives to minimize the risk of inductive interference.
Maintain a proper bend radius during routing to prevent internal conductor fatigue or damage to the shielding layer.
FAQIs this cable compatible with other PLC series?The 6ES5721-0CB00 is specifically designed for the Siemens Simatic S5 series. It is not intended for use with S7 or other modern PLC platforms.Does this cable require any configuration?No, this is a passive interconnect cable. It functions as a physical link and does not require software configuration or external power.
4 in stock
Delivery within 48 hours, pay afterwards
Mid weeks Monday to friday we offer next day delivery if the product is on stock and exceptions on holidays.
Weekends We offer no deliveries in the weekends.
International Depending on where you’re located, we offer next day delivery. Check your status on this link
DescriptionThe Siemens 6ES5951-7LB14 is a dedicated power supply module from the Simatic S5 series, specifically engineered to support the S5-115U and S5-115H programmable logic controller systems. This PS 951 unit is designed to provide stable, regulated DC power to the PLC backplane, ensuring consistent operation for CPU, I/O, and communication modules within the rack. It is a critical component for maintaining system integrity in demanding industrial environments, preventing downtime caused by voltage fluctuations or grid instability.Features
Designed for seamless integration with Simatic S5-115U and S5-115H rack systems.
Wide-range AC input compatibility supporting 110/120 V and 220/240 V AC networks.
Delivers a stable 5 V DC output at 3 A to the backplane bus.
Includes an integrated battery compartment for memory backup functionality using C-size Lithium cells.
Robust aluminum chassis design with passive cooling windows for optimal thermal management.
ApplicationsThis power supply is widely utilized in legacy automation environments where S5-115U/H series controllers remain in service. Typical applications include water treatment facilities, power generation control systems, and heavy manufacturing production lines where reliable power conversion is essential for continuous process monitoring and control.Technical Specifications
Model
6ES5951-7LB14
Series
Simatic S5-115U / S5-115H
Input Voltage
110 to 240 VAC (50/60 Hz)
Output Current
3 A at 5 VDC
Power Consumption
35 W
Operating Temperature
0 to 60 deg C
Backup Battery
C-Size Lithium (CA-6EW1000-7AA)
Installation Guidelines
Ensure the main power source is disconnected before inserting or removing the module from the rack.
Verify that the input voltage selection matches the local power grid requirements.
Install the module in a clean, dry environment with adequate clearance above and below the unit for passive ventilation.
Use appropriate ESD protection when handling the module to prevent damage to internal logic components.
Ensure the backplane connectors are fully seated to prevent intermittent power loss or contact oxidation.
FAQDoes this module include a backup battery?The 6ES5951-7LB14 is equipped with a battery compartment designed for a C-size Lithium battery, but the battery cell itself is typically supplied separately as a maintenance item.Is this module compatible with other S5 series racks?This specific PS 951 model is optimized for the Simatic S5-115U and S5-115H series. Please verify your specific rack configuration before installation to ensure compatibility.
5 in stock
Delivery within 48 hours, pay afterwards
Mid weeks Monday to friday we offer next day delivery if the product is on stock and exceptions on holidays.
Weekends We offer no deliveries in the weekends.
International Depending on where you’re located, we offer next day delivery. Check your status on this link
DescriptionThe Siemens 6ES5432-4UA11 is a robust digital input module designed for integration within the Simatic S5 PLC platform. This unit provides 32 galvanically isolated input channels operating at 24 VDC, facilitating reliable data acquisition from field devices such as proximity sensors, limit switches, and industrial pushbuttons. By incorporating optical isolation, the module effectively protects the central processing unit from electrical transients, ground loops, and voltage spikes common in harsh manufacturing environments.Features
32 floating (galvanically isolated) input channels for flexible field wiring.
Integrated group error signal monitoring for enhanced diagnostic reporting.
Optocoupler-based isolation to prevent noise interference and protect internal logic.
Integrated hardware filtering to suppress contact bounce and high-frequency signal noise.
Compatible with standard Simatic S5 rack-based architectures.
ApplicationsThis module is suitable for use in demanding industrial applications, including petrochemical processing, deep-well mining, and large-scale automated manufacturing lines where reliable signal integrity and diagnostic monitoring are critical for operational uptime.Technical Specifications
Model
6ES5 432-4UA11
Brand
Siemens
Series
Simatic S5
Input Channels
32 floating inputs
Nominal Voltage
24 VDC
Signal Level 0
-30 VDC to 5 VDC
Signal Level 1
13 VDC to 33 VDC
Power Consumption
3.5 W (typical)
Operating Temperature
0 to 60 deg C
Storage Temperature
-40 to 70 deg C
Installation Guidelines
Ensure the PLC rack power is disconnected before installing or removing the module to prevent electrical damage.
Verify that field wiring is routed away from high-voltage power lines to minimize electromagnetic interference (EMI).
Use shielded cabling for field inputs where possible to maintain signal integrity in high-noise environments.
Ensure the module is fully seated in the backplane connector and secured with the appropriate locking mechanisms.
Follow standard ESD (electrostatic discharge) safety precautions when handling the module to protect internal circuitry.
FAQIs the 6ES5432-4UA11 compatible with all Simatic S5 systems?This module is designed for the Simatic S5 architecture; however, please verify your specific CPU and rack configuration to ensure compatibility with your existing system setup.Does this module require external power for the inputs?Yes, the module operates with a nominal 24 VDC input voltage. Ensure that your field power supply matches these requirements for proper signal detection.
5 in stock
Delivery within 48 hours, pay afterwards
Mid weeks Monday to friday we offer next day delivery if the product is on stock and exceptions on holidays.
Weekends We offer no deliveries in the weekends.
International Depending on where you’re located, we offer next day delivery. Check your status on this link
4 in stock
Delivery within 48 hours, pay afterwards
Mid weeks Monday to friday we offer next day delivery if the product is on stock and exceptions on holidays.
Weekends We offer no deliveries in the weekends.
International Depending on where you’re located, we offer next day delivery. Check your status on this link
Overview
The Siemens 6GK1510-0AC00 is an active repeater module engineered for the Simatic Net product family, specifically designed to extend the physical reach and node capacity of Profibus networks. By regenerating electrical signals, this module effectively mitigates attenuation and data corruption in industrial environments where cabling spans significant distances. It is an essential component for maintaining robust communication integrity in complex automation architectures, such as power generation facilities and large-scale chemical processing plants.
Features
Signal Regeneration: Actively amplifies and reshapes bus signals to ensure reliable data transmission over extended segment lengths.
Automatic Baud Rate Detection: Supports transmission speeds ranging from 9.6 kbit/s up to 1500 kbit/s, automatically adapting to the existing network configuration.
Galvanic Isolation: Provides electrical separation between network segments to prevent ground loops and protect against transient voltage spikes.
Diagnostics: Equipped with integrated status LEDs for immediate visual monitoring of bus activity, transmission errors, and power status.
Protocol Transparency: Operates at the physical layer, ensuring seamless integration without altering data frames or adding latency.
Technical Specifications
Model
6GK1510-0AC00
Brand
Siemens
Series
Simatic Net
Operating Voltage
24 VDC
Transmission Rates
9.6 kbit/s to 1500 kbit/s (auto-detect)
Power Consumption
2.8 W (typical)
Galvanic Isolation
Yes
Operating Temperature
0 to 60 deg C
Storage Temperature
-40 to 70 deg C
Installation Guidelines
Ensure the module is mounted in a location with adequate ventilation to maintain the specified operating temperature range.
Verify that the 24 VDC power supply is stable and properly grounded before connecting the module to the network.
Use shielded, twisted-pair cabling suitable for Profibus applications to minimize electromagnetic interference (EMI).
Always power down the system before inserting or removing the module from the DIN rail to prevent electrical damage.
Maintain proper termination at the ends of the bus segments to prevent signal reflections.
FAQ
Does this repeater require manual configuration for baud rates? No, the 6GK1510-0AC00 features automatic baud rate detection, allowing it to adapt to the network speed without manual intervention.
Can this module isolate electrical noise between segments? Yes, the module provides galvanic isolation, which is critical for preventing ground loops and protecting sensitive equipment from voltage surges in distributed networks.
4 in stock
Delivery within 48 hours, pay afterwards
Mid weeks Monday to friday we offer next day delivery if the product is on stock and exceptions on holidays.
Weekends We offer no deliveries in the weekends.
International Depending on where you’re located, we offer next day delivery. Check your status on this link
9 in stock
Delivery within 48 hours, pay afterwards
Mid weeks Monday to friday we offer next day delivery if the product is on stock and exceptions on holidays.
Weekends We offer no deliveries in the weekends.
International Depending on where you’re located, we offer next day delivery. Check your status on this link
The Siemens 383VA21N1F is a Multi-Point Display Station from the Moore 383 series, designed for industrial monitoring and process visualization applications. This unit serves as a reliable interface for tracking multiple process variables within a control system environment.Features
High-visibility multi-point display for real-time process monitoring.
Engineered for integration within the Moore 383 controller product family.
Robust industrial construction suitable for control room and panel-mount configurations.
Provides centralized data visualization for complex process loops.
ApplicationsThis display station is typically utilized in process industries such as chemical, oil and gas, and power generation, where operators require immediate access to multiple process parameters simultaneously. It acts as a critical interface component in distributed control systems or standalone process control panels.Technical Specifications
Manufacturer
Siemens
Model
383VA21N1F
Series
Moore 383
Device Type
Multi-Point Display Station
Weight
3.4 kg
Installation Guidelines
Ensure the panel cutout meets the required specifications for the Moore 383 series form factor.
Verify that the power supply matches the rated voltage requirements before connection.
Use appropriate shielding for signal cables to minimize electromagnetic interference (EMI) in high-noise environments.
Handle with care to prevent electrostatic discharge (ESD) damage to internal electronic components.
Always disconnect power before installing or removing the unit from the panel.
FAQIs this product still in production?No, the Siemens 383VA21N1F has been discontinued by the manufacturer. We provide these units as spare parts to support existing legacy installations.What is the primary function of the 383VA21N1F?This unit is a multi-point display station designed to provide operators with a clear, consolidated view of various process variables managed by the Moore 383 control system.
9 in stock
Delivery within 48 hours, pay afterwards
Mid weeks Monday to friday we offer next day delivery if the product is on stock and exceptions on holidays.
Weekends We offer no deliveries in the weekends.
International Depending on where you’re located, we offer next day delivery. Check your status on this link
8 in stock
Delivery within 48 hours, pay afterwards
Mid weeks Monday to friday we offer next day delivery if the product is on stock and exceptions on holidays.
Weekends We offer no deliveries in the weekends.
International Depending on where you’re located, we offer next day delivery. Check your status on this link
DescriptionThe Siemens 6EW1810-3AA is a dedicated power supply unit designed for the Simadyn D control system architecture. Identified as the SP6 power supply module, this component provides reliable voltage regulation for critical industrial automation tasks. While officially discontinued by the manufacturer as of August 2009, this unit remains a vital spare for legacy Simadyn D installations requiring maintenance or system restoration.Features
Designed specifically for the Siemens Simadyn D product family.
Provides a stable output of 5V at 22A.
Operates with a 24VDC input voltage.
Robust construction suitable for industrial control cabinet environments.
Compatible with SP6 series hardware configurations.
Technical Specifications
Manufacturer
Siemens
Model / Order Code
6EW1810-3AA
Series
Simadyn D / SP6
Input Voltage
24VDC
Output Rating
5V / 22A
Status
Discontinued (07/08/2009)
Tariff Code
8504409540
Installation Guidelines
Ensure the control cabinet is powered down before attempting to install or remove the 6EW1810-3AA module.
Verify that the input power source is a stable 24VDC supply to prevent damage to the unit or connected backplane components.
Maintain adequate clearance around the module to allow for proper thermal dissipation.
Follow standard ESD (Electrostatic Discharge) protocols when handling the module to protect internal circuitry.
Confirm that all terminal connections are secure and that the wiring is routed away from high-voltage or high-EMI sources to minimize signal interference.
FAQIs the 6EW1810-3AA still being manufactured by Siemens?No, this model was officially discontinued by Siemens on August 7, 2009. We supply these units as legacy spare parts for existing Simadyn D systems.What is the primary input voltage for this power supply?The unit is designed to operate on a 24VDC input.Can this unit replace other Simadyn D power supplies?This unit is specific to the SP6 configuration. Please verify your system's part number requirements before installation to ensure compatibility.
8 in stock
Delivery within 48 hours, pay afterwards
Mid weeks Monday to friday we offer next day delivery if the product is on stock and exceptions on holidays.
Weekends We offer no deliveries in the weekends.
International Depending on where you’re located, we offer next day delivery. Check your status on this link
4 in stock
Delivery within 48 hours, pay afterwards
Mid weeks Monday to friday we offer next day delivery if the product is on stock and exceptions on holidays.
Weekends We offer no deliveries in the weekends.
International Depending on where you’re located, we offer next day delivery. Check your status on this link
DescriptionThe Siemens 6DS1144-8AA is an I/O bus comparator and switchover module designed for the Teleperm M and ME control system architectures. This specialized module serves a critical role in managing bus integrity and facilitating seamless switchover operations between redundant I/O bus segments. As a legacy component within the Teleperm ecosystem, it ensures high availability and signal synchronization in demanding industrial process control environments.Features
Engineered specifically for Teleperm M/ME system compatibility.
Integrated bus comparison logic for real-time monitoring of I/O bus status.
Automatic switchover functionality to enhance system reliability and fault tolerance.
Robust construction suitable for standard industrial control cabinet mounting.
Technical Specifications
Manufacturer
Siemens
Model Number
6DS1144-8AA
Function
I/O Bus Comparator and Switchover
System Compatibility
Teleperm M / ME
Status
Discontinued by Manufacturer
Approximate Weight
0.3 kg
Installation Guidelines
Ensure the control system is powered down before attempting to insert or remove the 6DS1144-8AA module from the rack.
Handle the module using standard ESD (Electrostatic Discharge) precautions to prevent damage to internal circuitry.
Verify that the module is fully seated in the designated slot to ensure proper physical and electrical contact with the backplane.
Route signal cables away from high-voltage lines and sources of electromagnetic interference (EMI) to maintain bus signal integrity.
Ensure adequate ventilation within the cabinet to prevent thermal buildup during continuous operation.
FAQIs the Siemens 6DS1144-8AA still in production?No, this module has been discontinued by the manufacturer. We provide high-quality tested surplus units to support the continued operation of legacy Teleperm systems.What is the primary function of this module?The 6DS1144-8AA acts as a bus comparator and switchover unit, which is essential for maintaining redundant I/O communication paths in Teleperm M/ME control configurations.
4 in stock
Delivery within 48 hours, pay afterwards
Mid weeks Monday to friday we offer next day delivery if the product is on stock and exceptions on holidays.
Weekends We offer no deliveries in the weekends.
International Depending on where you’re located, we offer next day delivery. Check your status on this link
1 in stock
Delivery within 48 hours, pay afterwards
Mid weeks Monday to friday we offer next day delivery if the product is on stock and exceptions on holidays.
Weekends We offer no deliveries in the weekends.
International Depending on where you’re located, we offer next day delivery. Check your status on this link
The Siemens 6ES5470-7LB12 is a specialized analog output module designed for integration within the SIMATIC S5-115U and S5-115F controller families. This unit provides eight independent, galvanically isolated output channels, allowing for the precise conversion of digital control values into bipolar voltage signals. It is widely utilized in industrial environments for driving proportional actuators, valve positioners, and variable speed drive references where signal integrity and electrical isolation are critical for system stability.Features
Provides 8 independent analog output channels.
Output signal range: +/- 10 V.
Floating, galvanically isolated circuit design to mitigate ground loop interference.
Engineered for direct integration into the SIMATIC S5-115U/F rack backplane.
Robust construction designed for high-vibration and demanding industrial thermal cycles.
ApplicationsThis module is suitable for continuous process control applications, including chemical processing, oil and gas extraction, and heavy manufacturing. It serves as a reliable interface for controlling analog field devices in legacy S5 automation architectures.Technical Specifications
Model
6ES5470-7LB12
Brand
Siemens
Series
SIMATIC S5-115U
Module Type
Analog Output Module
Channels
8
Output Range
+/- 10 V
Isolation
Galvanically Isolated / Floating
Power Consumption
4.5 W
Operating Temperature
0 to 60 deg C
Installation Guidelines
Ensure the PLC rack is powered down before inserting or removing the module to prevent electrical damage to the backplane.
Verify that the module is securely seated in the designated rack slot and that the bus connectors are fully engaged.
Use shielded twisted-pair cabling for all analog output connections to minimize EMI/RFI interference.
Maintain proper module spacing within the rack to ensure adequate airflow and prevent overheating.
Always adhere to local electrical codes for grounding and signal shielding when terminating field wiring.
FAQIs this module compatible with other S5 series racks?The 6ES5470-7LB12 is specifically designed for the S5-115U and 115F series. Please check your specific hardware manual for rack compatibility.Does this module require external power for the outputs?The module is powered via the backplane, but ensure your field loop requirements are met according to the technical documentation provided by Siemens for this specific model.
1 in stock
Delivery within 48 hours, pay afterwards
Mid weeks Monday to friday we offer next day delivery if the product is on stock and exceptions on holidays.
Weekends We offer no deliveries in the weekends.
International Depending on where you’re located, we offer next day delivery. Check your status on this link
DescriptionThe Siemens 6ES5946-3UA23 is a high-performance central processing unit (CPU) module belonging to the SIMATIC S5 automation system family. Engineered for robust industrial control applications, this CPU 946 module serves as the primary intelligence for S5-based programmable logic controller configurations. Please note that this component has been discontinued by the manufacturer and is primarily utilized for maintenance and legacy system support.Features
Designed for integration within the SIMATIC S5 hardware environment.
Reliable processing capabilities for complex automation tasks.
Standardized interface for communication with S5 I/O modules and peripherals.
Engineered for long-term operational stability in industrial environments.
Technical Specifications
Manufacturer
Siemens
Model Number
6ES5946-3UA23
Product Type
CPU Module (CPU 946)
System Compatibility
SIMATIC S5
Status
Discontinued by Manufacturer
Tariff Code
8537109060
Installation Guidelines
Ensure all power to the rack is disconnected before attempting to insert or remove the CPU module.
Handle the module using proper ESD (Electrostatic Discharge) safety precautions to prevent damage to internal circuitry.
Verify that the module is correctly seated in the designated CPU slot of the S5 rack to ensure proper backplane connection.
Check for secure mounting and alignment before reapplying power to the system.
Ensure the installation environment meets the cooling and ventilation requirements specified for the SIMATIC S5 chassis to prevent overheating.
FAQIs the 6ES5946-3UA23 still in production?No, this module is discontinued by Siemens. It is typically sourced for legacy system repair and maintenance.What system is this module compatible with?This module is specifically designed for the Siemens SIMATIC S5 series programmable logic controllers.
3 in stock
Delivery within 48 hours, pay afterwards
Mid weeks Monday to friday we offer next day delivery if the product is on stock and exceptions on holidays.
Weekends We offer no deliveries in the weekends.
International Depending on where you’re located, we offer next day delivery. Check your status on this link
DescriptionThe Siemens 500-2151 is a robust power supply unit designed specifically for the SIMATIC TI500 PLC chassis. This module provides reliable power distribution to the backplane, supporting both logic processors and associated I/O modules within the rack. By offering selectable input voltage ranges, it accommodates diverse industrial power grids, ensuring consistent performance in demanding environments such as manufacturing plants, chemical processing facilities, and energy infrastructure.Features
Voltage Flexibility: Supports field-selectable 110 VAC or 220 VAC primary inputs.
Stable Output: Delivers a steady 3 A output current to the system backplane.
Hazardous Location Rated: Certified for Class 1 Division 2 environments, providing safety in areas where volatile gases or vapors may be present.
Integrated Protection: Features internal overvoltage clamping and thermal overload shutdown mechanisms to protect the PLC system from electrical faults.
Noise Mitigation: Built-in EMI filtering and surge suppression to maintain signal integrity against industrial power line interference.
Technical Specifications
Model
500-2151
Series
SIMATIC TI500
Input Voltage
110/220 VAC (Selectable)
Output Current
3 A
Power Rating
150 VA
Operating Temp
0 to 60 deg C
Storage Temp
-40 to 85 deg C
Certifications
Class 1 Division 2
Installation Guidelines
Power Status: Always ensure the main power source is disconnected before inserting or removing the module from the chassis.
Mounting: Ensure the module is fully seated in the designated power supply slot of the TI500 chassis to guarantee proper backplane contact.
Environment: Maintain adequate clearance around the module to facilitate airflow and heat dissipation, keeping ambient temperatures within the specified 0 to 60 deg C range.
Grounding: Use appropriate grounding practices to ensure the chassis is effectively bonded to the facility ground bus to prevent electrical noise coupling.
Handling: Observe standard ESD (Electrostatic Discharge) precautions when handling the module to prevent damage to sensitive internal circuitry.
FAQIs this module compatible with all TI500 chassis?The 500-2151 is designed specifically for the SIMATIC TI500 series. Please verify your specific chassis model and current draw requirements before installation.How do I select the input voltage?The module features a user-selectable input configuration. Ensure the setting matches your local supply voltage (110 VAC or 220 VAC) prior to applying power to the unit.
3 in stock
Delivery within 48 hours, pay afterwards
Mid weeks Monday to friday we offer next day delivery if the product is on stock and exceptions on holidays.
Weekends We offer no deliveries in the weekends.
International Depending on where you’re located, we offer next day delivery. Check your status on this link
9 in stock
Delivery within 48 hours, pay afterwards
Mid weeks Monday to friday we offer next day delivery if the product is on stock and exceptions on holidays.
Weekends We offer no deliveries in the weekends.
International Depending on where you’re located, we offer next day delivery. Check your status on this link
The Siemens 6ES7131-4BD01-0AA0 is a high-performance digital input module designed for the SIMATIC ET 200S distributed I/O system. This module provides four digital input channels, specifically engineered for 24 VDC signal processing in industrial automation environments. This listing is for a package containing five units.Features
Four-channel digital input capability for robust signal acquisition.
Optimized for the SIMATIC ET 200S modular distributed I/O architecture.
Standardized 24 VDC operating voltage for compatibility with industrial sensors and switches.
Compact electronic module design for space-saving rack configurations.
Technical Specifications
Product Model
6ES7131-4BD01-0AA0
Manufacturer
Siemens
Module Type
Digital Input Module
Number of Inputs
4
Operating Voltage
24 VDC
System Compatibility
SIMATIC ET 200S
Package Quantity
5 Units
Installation Guidelines
Ensure the ET 200S base unit is properly mounted on a standard DIN rail before inserting the module.
Always disconnect the power supply to the station before installing or removing any electronic modules to prevent electrical damage.
Ensure proper grounding of the ET 200S station to minimize electromagnetic interference (EMI).
Use shielded cabling for input signals to maintain signal integrity in high-noise industrial environments.
Verify that the module is fully seated and locked into the terminal module to ensure reliable contact.
FAQIs this price for a single module or the whole pack?The listed price is for a package containing five (5) units of the 6ES7131-4BD01-0AA0 module.What is the primary application for this module?This module is used within the Siemens ET 200S distributed I/O system to interface 24 VDC digital signals from field devices into a PLC or control system.
9 in stock
Delivery within 48 hours, pay afterwards
Mid weeks Monday to friday we offer next day delivery if the product is on stock and exceptions on holidays.
Weekends We offer no deliveries in the weekends.
International Depending on where you’re located, we offer next day delivery. Check your status on this link
2 in stock
Delivery within 48 hours, pay afterwards
Mid weeks Monday to friday we offer next day delivery if the product is on stock and exceptions on holidays.
Weekends We offer no deliveries in the weekends.
International Depending on where you’re located, we offer next day delivery. Check your status on this link
DescriptionThe Siemens 6DD1683-0BC0 is a dedicated power supply unit designed for the Simadyn D automation system. Identified as the SP8 model, this unit serves as a critical component for delivering stable power to rack-mounted control electronics. Note that this specific model has been discontinued by the manufacturer, making it a vital component for the maintenance and lifecycle support of legacy Simadyn D installations.Features
Designed specifically for Simadyn D series integration
Output capacity: 5V / 52A for high-demand logic and processing modules
Input voltage compatibility: 24 VDC
Integrated active cooling system (fan included) to ensure thermal stability under load
Robust industrial construction for rack-mount environments
Technical Specifications
Manufacturer
Siemens
Model
6DD1683-0BC0
Series
Simadyn D (SP8)
Output Voltage
5V
Output Current
52A
Input Voltage
24 VDC
Cooling
Integrated Fan
Installation Guidelines
Ensure the power supply is disconnected from all energy sources before insertion or removal from the rack.
Verify that the ventilation path for the integrated fan is clear of obstructions to prevent thermal shutdown.
Maintain proper grounding of the rack assembly to minimize electromagnetic interference and ensure operator safety.
Check that the input voltage matches the 24 VDC requirement before energizing the unit.
Handle with care to avoid damage to the connectors during installation into the Simadyn backplane.
FAQIs the 6DD1683-0BC0 still in production? No, this unit has been discontinued by Siemens.What is the primary function of this module? The SP8 power supply is used to provide a regulated 5V DC supply at high current (52A) for the Simadyn D control system architecture.Does this unit include cooling? Yes, the 6DD1683-0BC0 features an integrated fan to maintain optimal operating temperatures.
2 in stock
Delivery within 48 hours, pay afterwards
Mid weeks Monday to friday we offer next day delivery if the product is on stock and exceptions on holidays.
Weekends We offer no deliveries in the weekends.
International Depending on where you’re located, we offer next day delivery. Check your status on this link
3 in stock
Delivery within 48 hours, pay afterwards
Mid weeks Monday to friday we offer next day delivery if the product is on stock and exceptions on holidays.
Weekends We offer no deliveries in the weekends.
International Depending on where you’re located, we offer next day delivery. Check your status on this link
DescriptionThe Siemens 6DD1660-0AE0 is a specialized communications module designed for the Simadyn D automation system. Serving as a CS21 parallel rack coupling slave, this unit facilitates high-speed data exchange and synchronization between racks within a distributed control architecture. It is engineered for industrial environments where reliable rack-to-rack communication is essential for real-time process control.Features
Designed specifically for the Simadyn D platform.
Functions as a CS21 parallel rack coupling slave module.
Robust rack-mountable design for secure installation in industrial cabinets.
Wide input voltage tolerance for flexible power integration.
Designed for high reliability in demanding industrial process control applications.
Technical Specifications
Product Model
6DD1660-0AE0
Function
CS21 Parallel Rack Coupling Slave
System Compatibility
Simadyn D
Power Supply
24V DC (18-72V DC range)
Operating Temperature
-25 degC to +70 degC
Storage Temperature
-40 degC to +85 degC
Relative Humidity
<= 95% RH (non-condensing)
Tariff Code
8537101190
Installation Guidelines
Ensure the rack power is disconnected before installing or removing the module to prevent electrical damage.
Mount the module securely in the designated rack slot to ensure proper backplane connection.
Maintain proper ventilation within the control cabinet to ensure ambient temperatures remain within the specified -25 degC to +70 degC range.
Use appropriate grounding practices for the rack assembly to mitigate electromagnetic interference (EMI).
Verify that the power supply wiring falls within the 18-72V DC range before energizing the module.
FAQWhat is the primary function of the 6DD1660-0AE0 module?The 6DD1660-0AE0 functions as a CS21 parallel rack coupling slave module, enabling communication and data synchronization between racks in a Siemens Simadyn D system.Does this module require specific environmental conditions?Yes, it is rated for operation between -25 degC and +70 degC with a maximum non-condensing humidity of 95%. It should be installed in a controlled industrial environment to ensure longevity.Is this module compatible with other systems?The 6DD1660-0AE0 is specifically designed for the Simadyn D series. It is not intended for use with other PLC or DCS platforms.
3 in stock
Delivery within 48 hours, pay afterwards
Mid weeks Monday to friday we offer next day delivery if the product is on stock and exceptions on holidays.
Weekends We offer no deliveries in the weekends.
International Depending on where you’re located, we offer next day delivery. Check your status on this link
2 in stock
Delivery within 48 hours, pay afterwards
Mid weeks Monday to friday we offer next day delivery if the product is on stock and exceptions on holidays.
Weekends We offer no deliveries in the weekends.
International Depending on where you’re located, we offer next day delivery. Check your status on this link
The Siemens 6FC5103-0AB03-0AA3 is a Sinumerik operator interface unit designed for integration with Sinumerik 840C and 840CE control systems. This slimline operator panel serves as a critical human-machine interface for CNC machine tool management, providing high-resolution visual feedback and operator input capabilities in demanding industrial environments.Features
Designed for compatibility with Sinumerik 840C/840CE controller architectures.
Slimline form factor optimized for console mounting in space-constrained control cabinets.
19-inch display area for clear visualization of complex machining parameters and diagnostic data.
Dual-voltage power supply compatibility (115/230 VAC) at 50/60 Hz.
ApplicationsThis operator panel is primarily utilized in industrial CNC machining centers and automated production lines where Sinumerik 840C series controls are deployed. It allows operators to monitor machine status, input G-code programs, and adjust operational parameters in real-time.Technical Specifications
Model Number
6FC5103-0AB03-0AA3
System Compatibility
Sinumerik 840C / 840CE
Display Size
19-inch
Power Supply
115/230 VAC (50/60 Hz)
Manufacturer
Siemens
Status
Discontinued by Manufacturer
Installation Guidelines
Ensure the operator panel is mounted in a clean, dry environment protected from excessive oil mist and coolant spray.
Verify that the control console cutout dimensions match the slimline mounting requirements prior to installation.
Always disconnect the main power supply from the cabinet before connecting or disconnecting the interface cables to prevent electrical damage.
Ensure proper grounding of the chassis to the machine frame to minimize electromagnetic interference (EMI) and maintain signal integrity.
Use shielded cables for communication interfaces to avoid data corruption from nearby high-voltage motor drives or contactors.
FAQIs this unit still supported by the manufacturer?No, the 6FC5103-0AB03-0AA3 has been discontinued by Siemens. We offer these units as reliable spare parts for maintaining legacy 840C control systems.What is the primary function of this module?This is an operator interface panel designed to act as the primary HMI for Sinumerik 840C CNC systems, allowing for manual input and visual oversight of machine operations.
2 in stock
Delivery within 48 hours, pay afterwards
Mid weeks Monday to friday we offer next day delivery if the product is on stock and exceptions on holidays.
Weekends We offer no deliveries in the weekends.
International Depending on where you’re located, we offer next day delivery. Check your status on this link
2 in stock
Delivery within 48 hours, pay afterwards
Mid weeks Monday to friday we offer next day delivery if the product is on stock and exceptions on holidays.
Weekends We offer no deliveries in the weekends.
International Depending on where you’re located, we offer next day delivery. Check your status on this link
DescriptionThe Siemens 6DS1731-8DD is an analog input module designed for integration within industrial control systems. This component facilitates the conversion of incoming analog signals into digital values for further processing by the controller. Please note that this specific model has been discontinued by the manufacturer, making it a critical component for legacy system maintenance and support.Features
Reliable signal processing for analog input loops.
Engineered for seamless compatibility with designated Siemens industrial automation architectures.
Robust construction suitable for standard industrial control cabinet environments.
Direct replacement or spare for existing installations requiring the 6DS1731-8DD part number.
Technical Specifications
Manufacturer
Siemens
Model
6DS1731-8DD
Product Type
Analog Input Module
Status
Discontinued by Manufacturer
Weight
0.8 kg
Installation Guidelines
Ensure the control system power is fully disconnected before attempting to install or remove the module to prevent electrical damage or system faults.
Handle the module using proper electrostatic discharge (ESD) precautions to protect sensitive internal circuitry.
Verify that the module is securely seated in the rack or backplane and that all mechanical locking mechanisms are engaged.
Ensure that wiring is routed away from high-voltage cables or sources of electromagnetic interference (EMI) to maintain signal integrity.
Confirm proper grounding of the module chassis to the system common to minimize noise and ensure safe operation.
FAQIs this module still available from the manufacturer?No, the Siemens 6DS1731-8DD has been officially discontinued by the manufacturer. Our inventory provides a solution for users who need to maintain or repair legacy systems using this specific hardware.What should I do if my system reports an analog input error?First, verify that the module is properly seated and that the field wiring is secure. Check for signal continuity and ensure that the input signal levels are within the specified operational range for the module. If the module remains unresponsive, it may require replacement.
2 in stock
Delivery within 48 hours, pay afterwards
Mid weeks Monday to friday we offer next day delivery if the product is on stock and exceptions on holidays.
Weekends We offer no deliveries in the weekends.
International Depending on where you’re located, we offer next day delivery. Check your status on this link
9 in stock
Delivery within 48 hours, pay afterwards
Mid weeks Monday to friday we offer next day delivery if the product is on stock and exceptions on holidays.
Weekends We offer no deliveries in the weekends.
International Depending on where you’re located, we offer next day delivery. Check your status on this link
The Siemens 6ES7400-1TA01-0AA0 is a high-capacity rack designed for the SIMATIC S7-400 automation system. Known as the UR1 rack, this hardware component provides a robust mounting platform for central and distributed I/O configurations, supporting up to 18 module slots for complex industrial control requirements.Features
Supports 18 slots for flexible module arrangement.
Designed for both central and distributed S7-400 system configurations.
Capability to accommodate up to two redundant power supply units (PS).
Rugged construction suitable for standard industrial control cabinet environments.
ApplicationsThis rack is specifically engineered for large-scale automation tasks where high I/O density and system reliability are critical. It is frequently utilized in manufacturing, process control, and infrastructure management applications requiring the modularity and high-speed backplane communication inherent to the S7-400 series.Technical Specifications
Model
6ES7400-1TA01-0AA0
Designation
Rack UR1
Slot Count
18
Power Supply Support
Up to 2 redundant PS units
Operating Temperature (Min)
0 degC
Operating Temperature (Max)
60 degC
Tariff Code
8537101190
Installation Guidelines
Ensure the rack is mounted securely within a standard 19-inch industrial enclosure to maintain proper structural integrity.
Verify that the backplane connectors are free of dust or debris before inserting any I/O or CPU modules.
Always power down the system before installing or removing modules to prevent electrical faults or damage to the backplane pins.
Maintain adequate clearance around the rack to facilitate sufficient airflow and cooling, as the operating temperature must remain between 0 and 60 degC.
Ensure the rack is properly grounded according to site-specific industrial electrical standards to mitigate EMI interference.
FAQDoes this rack support redundant power supplies?Yes, the UR1 rack is designed to accommodate two redundant power supply modules.How many slots are available for I/O modules?The UR1 rack provides 18 slots for modules, including space for power supplies and communication processors.
9 in stock
Delivery within 48 hours, pay afterwards
Mid weeks Monday to friday we offer next day delivery if the product is on stock and exceptions on holidays.
Weekends We offer no deliveries in the weekends.
International Depending on where you’re located, we offer next day delivery. Check your status on this link
7 in stock
Delivery within 48 hours, pay afterwards
Mid weeks Monday to friday we offer next day delivery if the product is on stock and exceptions on holidays.
Weekends We offer no deliveries in the weekends.
International Depending on where you’re located, we offer next day delivery. Check your status on this link
DescriptionThe Siemens 6DM1001-2LA02-2 is a specialized control card, designated as version A2.02. This component is engineered to serve as a critical interface within Siemens industrial automation systems, facilitating precise control and signal processing operations. As a genuine OEM spare part, it maintains the rigorous performance standards required for high-availability industrial environments.Features
Original Siemens hardware component
Version: A2.02
Designed for integration into specific Siemens control architectures
Compact form factor for efficient rack or panel mounting
Technical Specifications
Manufacturer
Siemens
Model / Part Number
6DM1001-2LA02-2
Product Version
A2.02
Weight
0.4 kg
Installation Guidelines
Ensure the control system power is fully disconnected before attempting to install or remove the card.
Handle the module by its edges to prevent electrostatic discharge (ESD) damage to sensitive internal circuitry.
Verify that the card is correctly seated in the designated slot, ensuring firm engagement with the backplane connectors.
Maintain proper ventilation in the control cabinet to prevent thermal accumulation, which can degrade the lifespan of electronic components.
Route signal cables away from high-voltage power lines and sources of electromagnetic interference (EMI) to ensure signal integrity.
FAQIs this a genuine Siemens product?Yes, this is an authentic Siemens control card, supplied as a replacement part for industrial automation systems.What should I do if the module fails to initialize?First, verify that the card is securely seated in the backplane. Check for any bent pins or debris in the connector slot. Consult your system manual for specific error codes or LED diagnostics associated with this module type.Is this part compatible with my existing system?Please verify that the part number 6DM1001-2LA02-2 and the version A2.02 match your original equipment requirements exactly, as system revisions may require specific hardware iterations.
7 in stock
Delivery within 48 hours, pay afterwards
Mid weeks Monday to friday we offer next day delivery if the product is on stock and exceptions on holidays.
Weekends We offer no deliveries in the weekends.
International Depending on where you’re located, we offer next day delivery. Check your status on this link
2 in stock
Delivery within 48 hours, pay afterwards
Mid weeks Monday to friday we offer next day delivery if the product is on stock and exceptions on holidays.
Weekends We offer no deliveries in the weekends.
International Depending on where you’re located, we offer next day delivery. Check your status on this link
DescriptionThe Siemens U-55N is a robust 16-point digital input module designed for legacy SIMATIC automation environments. It functions as a reliable interface between field-side discrete sensors, switches, and the central control processor. Built to handle a flexible 12/24 VAC/DC input range, this module is widely utilized in heavy industrial sectors, including power generation and petrochemical processing, where maintaining stable legacy control logic is essential for operational continuity.Features
16 discrete input channels for high-density signal monitoring.
Dual-compatibility for 12/24 VAC/DC signal levels.
Integrated opto-electrical isolation to safeguard the PLC backplane against transient voltage surges.
On-board status LEDs for each channel, allowing for rapid visual diagnostics of field-side wiring and signal status.
Optimized for low-latency signal acquisition to ensure precise logic execution within the PLC scan cycle.
ApplicationsThis module is frequently deployed in legacy control architectures requiring high-density digital input handling. It is suitable for monitoring industrial switchgear, limit switches, and proximity sensors in environments such as oil refineries, mining facilities, and automated manufacturing lines.Technical Specifications
Model
U-55N
Brand
Siemens
Series
SIMATIC
Module Type
Digital Input Module
Input Points
16 Points
Voltage Rating
12/24 VAC/DC
Power Consumption
1.5 W (Typical)
Isolation
Optocoupler
Operating Temperature
0-60 deg C
Storage Temperature
-40 to +70 deg C
Installation Guidelines
Ensure the PLC rack is powered down before inserting or removing the U-55N module to prevent electrical damage.
Verify that the module is properly seated in the backplane connector to maintain reliable communication with the CPU.
Use shielded cabling for field inputs to minimize electromagnetic interference (EMI) in high-noise industrial environments.
Maintain adequate ventilation around the SIMATIC rack to ensure the operating temperature remains within the 0-60 deg C range.
Follow standard ESD (electrostatic discharge) safety procedures when handling the module to protect internal circuitry.
FAQIs the U-55N compatible with both AC and DC signals?Yes, the U-55N is engineered to support both 12/24 VAC and VDC inputs, making it highly versatile for various sensor types.Does this module require external power for the inputs?The module utilizes the field signal voltage; ensure your external power supply matches the 12/24V rating as specified in the technical documentation.
2 in stock
Delivery within 48 hours, pay afterwards
Mid weeks Monday to friday we offer next day delivery if the product is on stock and exceptions on holidays.
Weekends We offer no deliveries in the weekends.
International Depending on where you’re located, we offer next day delivery. Check your status on this link
3 in stock
Delivery within 48 hours, pay afterwards
Mid weeks Monday to friday we offer next day delivery if the product is on stock and exceptions on holidays.
Weekends We offer no deliveries in the weekends.
International Depending on where you’re located, we offer next day delivery. Check your status on this link
The Siemens 6GK1500-0FC00 is a high-performance PROFIBUS bus connector engineered for reliable fieldbus connectivity in industrial automation environments. Designed as part of the SIMATIC NET series, this component facilitates the connection of PROFIBUS DP and MPI nodes to the network bus, supporting communication speeds up to 12 Mbps. Its robust design ensures signal integrity and minimizes network interference in demanding industrial applications.Features
FastConnect Technology: Utilizes insulation-displacement contact (IDC) technology, allowing for quick, reliable cable termination without the need to strip individual conductors.
Axial Cable Exit: Features a 180-degree cable exit, ideal for space-constrained installations where depth is a factor.
High-Speed Support: Compatible with transmission rates from 9.6 Kbps to 12 Mbps, suitable for complex, high-speed control networks.
Robust Interface: Equipped with a standard 9-pin Sub-D male connector for secure, vibration-resistant mating with controllers and field devices.
Integrated Termination: Designed to maintain network stability and prevent signal reflections in PROFIBUS segments.
ApplicationsThis bus connector is widely utilized in industrial automation sectors including automotive manufacturing, power distribution, water management, and chemical processing. It is specifically designed for use with PROFIBUS DP and MPI network topologies where reliable, high-speed data exchange between PLCs, HMIs, and remote I/O is critical.Technical Specifications
Model
6GK1500-0FC00
Brand
Siemens SIMATIC NET
Interface
9-Pin Sub-D Male
Cable Exit
180-Degree Axial
Transmission Rate
9.6 Kbps to 12 Mbps
Connection Technology
FastConnect (IDC)
Operating Temperature
-25 to 60 deg C
Power Consumption
Passive (0 W)
Installation Guidelines
Ensure the PROFIBUS cable is cut cleanly before inserting it into the FastConnect housing.
Verify that the cable shielding is correctly positioned to contact the internal metal housing for effective grounding.
Snap the housing shut firmly to ensure the insulation-displacement contacts fully penetrate the wire insulation.
Avoid sharp bending radii for the PROFIBUS cable immediately adjacent to the connector to prevent signal degradation.
Always power down the network segment or follow site-specific safety protocols before performing maintenance or connector replacement.
FAQDoes this connector require specialized tools for installation? No, the FastConnect system is designed for tool-free installation, though a standard cable cutter is recommended for preparing the cable ends.Can this be used for MPI networks? Yes, the 6GK1500-0FC00 is fully compatible with both PROFIBUS DP and MPI network architectures.
3 in stock
Delivery within 48 hours, pay afterwards
Mid weeks Monday to friday we offer next day delivery if the product is on stock and exceptions on holidays.
Weekends We offer no deliveries in the weekends.
International Depending on where you’re located, we offer next day delivery. Check your status on this link
5 in stock
Delivery within 48 hours, pay afterwards
Mid weeks Monday to friday we offer next day delivery if the product is on stock and exceptions on holidays.
Weekends We offer no deliveries in the weekends.
International Depending on where you’re located, we offer next day delivery. Check your status on this link
Product OverviewThe Siemens 6ES5735-1BD20 is a specialized communication cable engineered for the Simatic S5 automation environment. This 3.2-meter assembly is designed to facilitate reliable data transfer between legacy peripheral hardware, specifically connecting PT 8.x and DR 2.x series industrial printers to PG/OP 396 programming and operator interfaces. By providing a stable physical connection, this cable ensures that critical operational logs, fault records, and diagnostic data are accurately captured and printed, supporting essential compliance and maintenance workflows in legacy control systems.Technical Features
Interface Technology: Utilizes a 20 mA current loop interface, which is inherently resistant to electromagnetic interference (EMI) and ground potential shifts common in industrial environments.
Signal Integrity: Features high-quality internal copper conductors protected by a dual-layer shielding system (aluminum-mylar foil and tinned copper braid) to minimize signal attenuation and noise.
Industrial Durability: Equipped with robust sub-D connectors designed for secure, gas-tight mechanical coupling, ensuring reliable operation despite continuous vibration on the factory floor.
Optimized Length: The 3.2-meter length provides sufficient reach for routing within control cabinets while maintaining signal quality for serial data transmission.
ApplicationsThis cable is primarily deployed in legacy Simatic S5 installations where hardcopy documentation of system events is required. Typical applications include chemical processing plants, power generation facilities, and pulp and paper manufacturing, where it connects printers to control terminals for sequence-of-events recording and diagnostic logging.Technical Specifications
Model
6ES5735-1BD20
Brand
Siemens Simatic S5
Cable Length
3.2 meters
Interface Protocol
20 mA Current Loop
Compatible Hardware
PT 8.x / DR 2.x Printers; PG/OP 396 Interfaces
Operating Temperature
0 to 60 deg C
Weight
0.18 kg
Installation Guidelines
Pre-installation: Ensure the power to both the printer and the PG/OP interface is disconnected before attempting to connect the cable to prevent potential current loop surges.
Routing: Route the cable away from high-voltage power lines and large motor contactors to maintain the integrity of the 20 mA signal.
Connection: Ensure that the sub-D connectors are fully seated and the locking screws are tightened to provide a secure, vibration-resistant connection.
Handling: Avoid sharp bends or kinks in the cable jacket, as this can damage the internal shielding and degrade long-term performance.
5 in stock
Delivery within 48 hours, pay afterwards
Mid weeks Monday to friday we offer next day delivery if the product is on stock and exceptions on holidays.
Weekends We offer no deliveries in the weekends.
International Depending on where you’re located, we offer next day delivery. Check your status on this link
3 in stock
Delivery within 48 hours, pay afterwards
Mid weeks Monday to friday we offer next day delivery if the product is on stock and exceptions on holidays.
Weekends We offer no deliveries in the weekends.
International Depending on where you’re located, we offer next day delivery. Check your status on this link
The Siemens 6FM1470-3BA25 is a specialized video interface module engineered for Sinumerik and Simodrive architectures. This unit facilitates the conversion of internal system data into high-resolution analog RGB video signals, providing operators with essential real-time visualization of machine axis coordinates, telemetry, and diagnostic information on industrial display hardware.Features
High-Bandwidth Processing: Dedicated onboard graphics controller for stable RGB signal output in high-EMI industrial environments.
Memory Expansion: Integrated with three dedicated slots to house proprietary memory modules, allowing for firmware backup and custom localized UI storage.
System Reset Control: Features a robust, front-mounted mechanical reset button that triggers a hardware interrupt, enabling rapid subsystem re-initialization without disrupting the main 24 VDC control bus.
Industrial Design: Engineered for reliability in demanding manufacturing settings such as paper mills and metal processing facilities.
ApplicationsThis module is primarily deployed in CNC machine tool systems and multi-axis drive applications where real-time visual feedback is critical for machine monitoring and rapid fault diagnosis.Technical Specifications
Model
6FM1470-3BA25
Brand
Siemens Sinumerik
Power Consumption
12 W
Display Protocol
Analog RGB Color
Expansion
3 x Memory Module Slots
Operating Temperature
0 to 55 deg C
Weight
0.7 kg
Installation Guidelines
Ensure the main control power is disconnected before installing or removing the module from the rack.
Handle the unit using proper ESD (Electrostatic Discharge) precautions to protect internal circuitry.
Verify that all memory modules are securely seated in their respective slots to prevent intermittent display artifacts.
Route signal cables away from high-voltage power lines and sources of significant electromagnetic interference to maintain signal integrity.
Ensure adequate ventilation in the cabinet to maintain operating temperatures within the specified 0 to 55 deg C range.
FAQDoes this module require external power?The module operates within the standard control bus power parameters, consuming 12 W. Ensure your system power supply is rated to handle the additional load of the video interface.What is the purpose of the three expansion slots?The three slots are designed to accept specialized Siemens memory cartridges, which are typically used for storing display firmware, screen configurations, or localized user interface data.Can this unit be used for LCD displays?Yes, provided the display hardware supports the standard analog RGB input signal generated by this module.
3 in stock
Delivery within 48 hours, pay afterwards
Mid weeks Monday to friday we offer next day delivery if the product is on stock and exceptions on holidays.
Weekends We offer no deliveries in the weekends.
International Depending on where you’re located, we offer next day delivery. Check your status on this link
6 in stock
Delivery within 48 hours, pay afterwards
Mid weeks Monday to friday we offer next day delivery if the product is on stock and exceptions on holidays.
Weekends We offer no deliveries in the weekends.
International Depending on where you’re located, we offer next day delivery. Check your status on this link
Product OverviewThe Siemens 6GK1100-0BA00 is a dedicated transceiver plug designed for the Simatic Net industrial communication environment. This component serves as a robust physical layer interface, facilitating reliable data exchange within Industrial Ethernet and related network architectures. Engineered for demanding industrial settings, this transceiver module ensures consistent signal integrity for workstations, PLCs, and control systems, effectively minimizing communication errors and preventing costly downtime in automated manufacturing processes.Features
Designed for seamless integration with 15-pin Sub-D industrial communication interfaces.
Pass-through architecture featuring one 15-pin male and one 15-pin female connector for inline installation.
Rugged mechanical design prevents signal pin degradation due to structural vibration or physical stress.
Passive integration profile requires no external power source, simplifying network topology.
Optimized for low-attenuation signal transfer in legacy LAN configurations.
ApplicationsThis transceiver plug is widely utilized in industrial automation environments where reliable Sub-D communication links are required. Typical applications include municipal infrastructure control, automated logistics systems, and plant-floor PLC networking where signal stability is critical for continuous operation.Technical Specifications
Model
6GK1100-0BA00
Brand
Siemens
Series
Simatic Net
Interface A
15-Pin Male Sub-D
Interface B
15-Pin Female Sub-D
Operating Temperature
0 to 60 deg C
Power Requirements
Passive
Installation Guidelines
Ensure the system is powered down before installing or removing the transceiver plug to prevent electrical arcing or damage to the communication port.
Verify that the Sub-D pins are aligned correctly during insertion to avoid bending or mechanical failure of the connector pins.
Secure the plug firmly to the mating interface to maintain constant electrical contact and minimize the impact of ambient vibration.
Route communication cables away from high-voltage lines or high-EMI sources to maintain signal clarity.
Perform a visual inspection of the connector housing and pins for debris or oxidation during routine maintenance cycles.
FAQIs this a powered module?No, the 6GK1100-0BA00 is a passive transceiver plug and does not require an external power supply to operate.What type of connection does this module use?This module uses a 15-pin Sub-D interface, featuring a male connector on one side and a female connector on the other for convenient pass-through connectivity.
6 in stock
Delivery within 48 hours, pay afterwards
Mid weeks Monday to friday we offer next day delivery if the product is on stock and exceptions on holidays.
Weekends We offer no deliveries in the weekends.
International Depending on where you’re located, we offer next day delivery. Check your status on this link
