General Electric (GE) offers a comprehensive range of industrial automation products. Its portfolio includes PACSystems RX3i/RX7i, Genius I/O modules, Mark VIe controllers, and PLC systems. GE products ensure reliable operation, scalable automation, and long-term support for industrial applications worldwide.
10 in stock
Delivery within 48 hours, pay afterwards
Mid weeks Monday to friday we offer next day delivery if the product is on stock and exceptions on holidays.
Weekends We offer no deliveries in the weekends.
International Depending on where you’re located, we offer next day delivery. Check your status on this link
DescriptionThe General Electric IC693CMM302B is an Enhanced Genius Communications Module designed for the Series 90-30 PLC system. This module facilitates high-speed communication between the PLC and Genius I/O devices, allowing for robust distributed control architectures. It acts as a bridge, enabling the Series 90-30 controller to exchange data with up to 31 Genius bus devices, supporting both global data transmission and reception.Features
Supports up to 31 Genius bus devices on a single network.
Provides 128 bytes of Global Data for both transmit and receive operations.
Occupies a single slot in the Series 90-30 baseplate system.
Features integrated LED indicators for Module OK and Communication status monitoring.
Compatible with CPU, expansion, and remote baseplates within the 90-30 series.
Technical Specifications
Product Model
IC693CMM302B
Manufacturer
General Electric
Series
Series 90-30
Bus Devices Supported
31
Global Data Length (Transmit)
128 Bytes
Global Data Length (Received)
128 Bytes
Backplane Current Draw
< 300 mA at 5VDC
Slot Width
Single slot
Status Indicators
Module OK, COMM LEDs
Installation Guidelines
Ensure the PLC system power is disconnected before installing or removing the module from the baseplate.
The IC693CMM302B can be installed in any available slot on the Series 90-30 baseplate, excluding the CPU slot.
Ensure the module is fully seated in the backplane connector to maintain reliable communication.
Handle the module using proper ESD (Electrostatic Discharge) safety practices to prevent damage to internal circuitry.
Verify that the Genius bus cabling is properly shielded and terminated according to GE Genius network specifications to minimize EMI interference.
FAQWhat is the primary function of the IC693CMM302B?This module serves as a Genius Communications Module (GCM) for GE Series 90-30 PLCs, allowing the controller to communicate with distributed Genius I/O blocks and other intelligent devices on the Genius bus.How many modules can be used in a single PLC system?The system supports up to 2 of these communication modules per PLC configuration.Is this module compatible with all Series 90-30 baseplates?Yes, it is compatible with CPU, expansion, and remote baseplates, provided it is not placed in the dedicated CPU slot.
10 in stock
Delivery within 48 hours, pay afterwards
Mid weeks Monday to friday we offer next day delivery if the product is on stock and exceptions on holidays.
Weekends We offer no deliveries in the weekends.
International Depending on where you’re located, we offer next day delivery. Check your status on this link
1 in stock
Delivery within 48 hours, pay afterwards
Mid weeks Monday to friday we offer next day delivery if the product is on stock and exceptions on holidays.
Weekends We offer no deliveries in the weekends.
International Depending on where you’re located, we offer next day delivery. Check your status on this link
DescriptionThe General Electric IC660BBD024 is an intelligent, high-density 32-point discrete sourcing I/O block from the Genius I/O product family. This versatile module is designed to interface controllers with field devices such as relays, contactors, and proximity switches. Each of the 32 circuits is software-configurable to function as an input, an output, or an output with feedback, providing significant flexibility for complex control applications.Features
32 configurable I/O circuits for mixed input/output operations
Sourcing I/O block design
Resettable self-protecting circuits for output channels
Advanced diagnostic capabilities including switch fault detection
Software-configurable filtering and operation parameters
LED indicators for block status, CPU communication, and individual circuit voltage presence
Applications
Turbine Control: High-density discrete I/O for legacy turbine control systems
Power Generation: Supports Genius Modular Redundancy for critical plant systems
Oil & Gas: Remote I/O block architecture to minimize long-distance field wiring
Industrial Automation: Interface for CNC machines, robotics, and assembly lines
Marine Technology: Onboard control and monitoring for shipboard electronics
Technical Specifications
Model
IC660BBD024
Channels
32 (Configurable)
Input Voltage
12/24 VDC
Output Current (per circuit)
0.5 A (steady state)
Total Block Current
16 A
Input Processing Time
1.4 ms (plus selectable filter)
Isolation
850 V
Input Impedance
3.3 kOhms
Output Turn-on Delay
0.5 ms (max)
Installation Guidelines
Wiring: Terminal connections should utilize #12 AWG wire or two #14 AWG wires.
Power Disconnect: Wire the block to ensure block power and input power are disconnected simultaneously to prevent unexpected power-up during maintenance.
Grounding: Ensure mounting screws are connected to a reliable, low-impedance grounding system to protect equipment and personnel.
Handling: Standard ESD precautions should be observed when handling the module. Always power down the system before inserting or removing the block from the bus.
FAQsDoes the IC660BBD024 operate as an input or output device?The IC660BBD024 is a 32-point module that can be configured on a per-channel basis as an input, an output, or an output with feedback.What is the current rating per point when configured as an output?The module is capable of delivering 0.5 Amperes per point when configured as an output, with a total block capacity of 16 Amperes.What is the primary function of this module?The GE IC660BBD024 is a 32-circuit DC source I/O block used to interface controllers with binary field devices such as sensors, relays, and contactors.
1 in stock
Delivery within 48 hours, pay afterwards
Mid weeks Monday to friday we offer next day delivery if the product is on stock and exceptions on holidays.
Weekends We offer no deliveries in the weekends.
International Depending on where you’re located, we offer next day delivery. Check your status on this link
3 in stock
Delivery within 48 hours, pay afterwards
Mid weeks Monday to friday we offer next day delivery if the product is on stock and exceptions on holidays.
Weekends We offer no deliveries in the weekends.
International Depending on where you’re located, we offer next day delivery. Check your status on this link
DescriptionThe General Electric IC695CRU320 is a high-performance Redundancy CPU processor module designed for the PACSystems RX3i platform. Engineered for critical industrial applications, this module facilitates hot-standby configurations, significantly increasing system availability. In a redundant setup, the IC695CRU320 manages the synchronization between two controller racks, allowing for an automatic, seamless transfer of control from a primary rack to a secondary rack in the event of a fault. This transition occurs in a maximum of one logic scan, with a minimum switchover time of 3.133 ms.Features
Processor: Intel Celeron M at 1 GHz clock speed.
Memory: 64 MB of battery-backed RAM and 64 MB of non-volatile flash user memory.
Redundancy Support: Designed for hot-standby configurations; supports synchronization via IC695RMX128/228 modules.
Communication: Equipped with two serial ports supporting RS-232 and RS-485 standards.
Data Integrity: Features Error Checking and Correction (ECC) for RAM and read-only program protection during execution.
Diagnostics: Includes a dedicated System Fault (Sys Flt) LED and an I/O Force indicator for enhanced troubleshooting.
ApplicationsThe IC695CRU320 is intended for large-scale, complex automation processes where downtime must be minimized. It is widely used in power generation, oil and gas, and large-scale manufacturing environments where redundant control logic is required to maintain operational continuity.Technical Specifications
Model
IC695CRU320
Processor
Intel Celeron M (1 GHz)
User Memory
64 MB RAM / 64 MB Flash
Slot Occupancy
2 Slots
Serial Ports
2 (RS-232/RS-485)
Switchover Time
Max 1 logic scan (min 3.133 ms)
Power Requirements
+3.3 VDC (1.0A) / +5 VDC (1.2A)
Operating Temp
0 to 60 degC
Enclosure Rating
IP20 (Requires NEMA/UL Type 1 enclosure)
Installation Guidelines
Power: Ensure all power is disconnected from the rack before inserting or removing the module.
Mounting: This module occupies two slots in the RX3i rack. Ensure it is fully seated and secured using the integrated latches.
Environment: Install in a clean, dry, and protected NEMA/UL Type 1 enclosure to prevent exposure to dust, moisture, and corrosive elements.
Grounding: Follow standard industrial grounding practices for the RX3i backplane to ensure electrical noise immunity.
Battery: Requires an external high-capacity battery (IC693ACC302) to maintain RAM data during power loss.
FAQWhat is the primary purpose of the IC695CRU320?It is a Redundancy CPU that allows a backup unit to take over automatically if the primary controller fails, ensuring minimal process disruption.What hardware is required for the redundant IC695CRU320?Each unit must be configured with a redundant memory exchange (RMX) module (IC695RMX128/228) to facilitate data synchronization.What is the IC695CRU320 operating temperature?The module is designed to operate in temperatures ranging from 0 to 60 degC (32 to 140 degF).
3 in stock
Delivery within 48 hours, pay afterwards
Mid weeks Monday to friday we offer next day delivery if the product is on stock and exceptions on holidays.
Weekends We offer no deliveries in the weekends.
International Depending on where you’re located, we offer next day delivery. Check your status on this link
1 in stock
Delivery within 48 hours, pay afterwards
Mid weeks Monday to friday we offer next day delivery if the product is on stock and exceptions on holidays.
Weekends We offer no deliveries in the weekends.
International Depending on where you’re located, we offer next day delivery. Check your status on this link
DescriptionThe GE Fanuc IC670ALG230 is a high-performance Current Source Analog Input Module designed for the Field Control I/O system. This module provides eight single-ended input channels, specifically engineered to interface with 0-20 mA current loops in industrial control environments. It features 12-bit conversion resolution and is designed to provide reliable signal processing for process automation applications.Features
Eight (8) single-ended analog input channels.
Input signal range of 0 to 20 mA (nominal) with a maximum range of 0 to 25 mA.
12-bit analog-to-digital conversion resolution.
Integrated isolation rated at 250 VAC continuous and 1500 VAC for 1 minute.
Compatible with 24 VDC external power supply systems.
Designed for integration with the GE Field Control Bus Interface Unit (BIU).
Technical Specifications
Model Number
IC670ALG230
Number of Channels
8
Input Signal Range
0-20 mA (nominal), up to 25 mA
Input Impedance
Approx. 250 Ohms
Resolution
12-bit (5.0 microAmps)
Conversion Time
60 microseconds per channel (typical)
Isolation
250 VAC continuous / 1500 VAC (1 min)
External Power Supply
18-30 VDC
Current Draw (from BIU)
51 mA maximum
Installation Guidelines
Ensure the system power is disconnected before installing or removing the module from the Field Control station.
Mount the module securely onto the designated Field Control carrier or base.
Use shielded twisted-pair cabling for analog signal inputs to minimize electromagnetic interference (EMI).
Maintain proper grounding practices to ensure signal integrity and protection against surges.
Ensure the module is kept away from high-voltage power lines and high-frequency noise sources.
Verify that the external 24 VDC power supply is within the specified 18-30 VDC range before applying power.
FAQWhat is the primary function of the IC670ALG230 module?The IC670ALG230 is an analog input module used to convert 0-20 mA current signals from field devices into digital data for the GE Field Control system.Does this module require an external power supply?Yes, the module requires an external 18-30 VDC power supply to operate the analog input loops.What is the isolation rating for this module?The module provides 250 VAC continuous isolation to the case, with a dielectric withstand rating of 1500 VAC for one minute.
1 in stock
Delivery within 48 hours, pay afterwards
Mid weeks Monday to friday we offer next day delivery if the product is on stock and exceptions on holidays.
Weekends We offer no deliveries in the weekends.
International Depending on where you’re located, we offer next day delivery. Check your status on this link
10 in stock
Delivery within 48 hours, pay afterwards
Mid weeks Monday to friday we offer next day delivery if the product is on stock and exceptions on holidays.
Weekends We offer no deliveries in the weekends.
International Depending on where you’re located, we offer next day delivery. Check your status on this link
DescriptionThe GE Fanuc IC670MDL730 is a high-performance discrete output module designed for the Field Control series. This module provides 8 discrete output channels, facilitating reliable control of field devices within industrial automation systems. It is engineered to operate within a nominal 24V DC environment, ensuring compatibility with standard industrial control architectures.Features
8 discrete output channels for versatile control applications.
Designed for the Field Control I/O system architecture.
Supports a wide operating voltage range of 17.5V DC to 29.5V DC.
Integrated LED status indicators for simplified troubleshooting and diagnostics.
Robust short-circuit protection capable of handling 20 Amps for 100 microseconds.
Technical Specifications
Model
IC670MDL730
Manufacturer
General Electric (GE Fanuc)
Series
Field Control
Number of Outputs
8
Output Voltage Range
17.5-29.5 Volts DC
Nominal Voltage
24 Volts DC
Current Consumption
125 mA
Isolation
None (Group to Group)
Short Circuit Response
20 Amps for 100 microseconds
Installation Guidelines
Ensure the power supply is disconnected before installing or removing the module from the Field Control station.
Mount the module securely onto the designated I/O base to ensure proper electrical connection to the backplane.
Verify that the field wiring is correctly terminated according to the module's pinout configuration.
Maintain proper clearance around the module to allow for adequate airflow and heat dissipation.
Follow standard ESD (Electrostatic Discharge) precautions when handling the module to prevent damage to internal circuitry.
Route signal cables away from high-voltage power lines to minimize electromagnetic interference (EMI).
FAQWhat is the primary function of the IC670MDL730?The IC670MDL730 is a discrete output module used to interface a controller with field-level devices, providing 8 channels of DC output control.What is the nominal operating voltage for this module?The module is designed for a nominal 24V DC input, with an operational range between 17.5V and 29.5V DC.Does this module provide isolation between output groups?No, the IC670MDL730 does not feature group-to-group isolation.
10 in stock
Delivery within 48 hours, pay afterwards
Mid weeks Monday to friday we offer next day delivery if the product is on stock and exceptions on holidays.
Weekends We offer no deliveries in the weekends.
International Depending on where you’re located, we offer next day delivery. Check your status on this link
9 in stock
Delivery within 48 hours, pay afterwards
Mid weeks Monday to friday we offer next day delivery if the product is on stock and exceptions on holidays.
Weekends We offer no deliveries in the weekends.
International Depending on where you’re located, we offer next day delivery. Check your status on this link
DescriptionThe DS200LDCCH1 is a specialized drive control and Local Area Network (LAN) communications board designed for the General Electric Speedtronic Mark V series. Engineered for integration with GE DIRECTO-MATIC 2000 exciters and drives, this module functions as a primary processing hub for automated gas, steam, and wind turbine control systems. It manages complex motor processing, operator interfacing, and high-speed network synchronization, ensuring system stability in demanding industrial environments such as power generation, oil refining, and mining.Features
Quad-Microprocessor Architecture: Features dedicated processors for Drive Control (DCP), Motor Control (MCP), Co-Motor computation (CMP), and LAN communication (LCP).
Integrated Diagnostics: Includes an onboard alphanumeric keypad for local parameter adjustment and system diagnostics.
Memory Storage: Equipped with multiple Flash PROMs (U6, U7, U11, U12, U22, U23) and a U9 EEPROM for configuration and firmware storage.
Robust Construction: PCB is protected with conformal coating to resist environmental contaminants.
Bus Connectivity: Supports five distinct communication bus systems for high-speed I/O signal processing.
ApplicationsThis board is primarily utilized within the GE Speedtronic Mark V control platform to facilitate drive regulation and communication. Typical applications include turbine control, excitation systems, and large-scale industrial motor drive management where high-availability and multi-processor synchronization are required.Technical Specifications
Model
DS200LDCCH1
Brand
General Electric (GE)
Series
Mark V Speedtronic
Product Type
LAN/Control Communications Board
Microprocessors
DCP, MCP, CMP, LCP
Memory
Flash PROMs (U6, U7, U11, U12, U22, U23), U9 EEPROM
Operating Temperature
0 to 60 deg C
Storage Temperature
-40 to 85 deg C
Manual Reference
GEI-100216
Installation Guidelines
ESD Protection: Always use a grounded wrist strap when handling the board to prevent electrostatic discharge damage to sensitive components.
Power Down: Ensure the drive system is fully de-energized and locked out before attempting to install or remove the module from the rack.
Seating: Ensure the board is fully seated in the designated backplane slot and that all retaining screws are tightened to maintain proper electrical contact and vibration resistance.
Environment: Maintain the cabinet environment within the specified temperature range and ensure cooling fans are operational to prevent overheating.
FAQIs the DS200LDCCH1 compatible with all Mark V systems?The DS200LDCCH1 is specific to the Mark V Speedtronic series and is designed for use with DIRECTO-MATIC 2000 exciters. Always verify your system's specific revision requirements against the GEI-100216 manual before installation.Does this board require site-specific configuration?Yes, the board stores configuration data in its onboard Flash PROMs and EEPROM. When replacing an existing unit, ensure that the site-specific software and parameters are correctly loaded or transferred to the new module.
9 in stock
Delivery within 48 hours, pay afterwards
Mid weeks Monday to friday we offer next day delivery if the product is on stock and exceptions on holidays.
Weekends We offer no deliveries in the weekends.
International Depending on where you’re located, we offer next day delivery. Check your status on this link
4 in stock
Delivery within 48 hours, pay afterwards
Mid weeks Monday to friday we offer next day delivery if the product is on stock and exceptions on holidays.
Weekends We offer no deliveries in the weekends.
International Depending on where you’re located, we offer next day delivery. Check your status on this link
DescriptionThe HE693THM884 is an 8-channel thermocouple input module designed for the GE Fanuc Series 90-30 PLC platform. Manufactured by Horner APG, this module provides high-precision temperature monitoring by allowing direct connection of J and K type thermocouples to the PLC backplane, eliminating the need for external signal conditioners or transmitters. With an 18-bit integrating A/D converter and a resolution of 0.1 degC, it is engineered for demanding industrial temperature sensing applications.Features
8 isolated input channels for J and K type thermocouples
High-resolution 18-bit A/D conversion with 0.1 degC precision
Integrated cold junction compensation via terminal block temperature sensing
Open-circuit detection with dedicated alarm bits for each channel
Fast data acquisition with a scan rate of up to 40 channels per second
Direct backplane power consumption of 100mA at 5VDC
Technical Specifications
Model
HE693THM884
Channels
8
Supported Types
J, K
Resolution
0.1 degC
A/D Conversion
18-Bit Integrating
Input Impedance
> 20 Mohms
Max Sustained Input
+/- 35V
Common Mode Rejection
> 100 dB
Power Consumption
100mA @ 5VDC
Operating Temperature
0 to 60 degC
Humidity
5% to 95% (non-condensing)
Installation Guidelines
Ensure the PLC is powered down before inserting or removing the module from the rack.
Use shielded thermocouple extension wire to minimize noise interference in industrial environments.
Connect the cable shield to a reliable earth ground point to maintain signal integrity.
Avoid routing thermocouple signal cables near high-voltage lines or high-EMI sources (e.g., VFDs, contactors).
Verify that the terminal block is properly seated to ensure accurate cold junction compensation.
FAQWhat does the HE693THM884 do?It is an analog input module that allows 8 thermocouples to be connected directly to a Series 90-30 PLC, handling the signal processing and cold junction compensation internally.What is the main power supply required?The module consumes 100mA at 5VDC, which is supplied directly from the PLC backplane.How does the module handle broken sensors?The module includes an open-circuit alarm bit for each of the eight channels, which allows the PLC program to detect and respond to a broken thermocouple wire.
4 in stock
Delivery within 48 hours, pay afterwards
Mid weeks Monday to friday we offer next day delivery if the product is on stock and exceptions on holidays.
Weekends We offer no deliveries in the weekends.
International Depending on where you’re located, we offer next day delivery. Check your status on this link
4 in stock
Delivery within 48 hours, pay afterwards
Mid weeks Monday to friday we offer next day delivery if the product is on stock and exceptions on holidays.
Weekends We offer no deliveries in the weekends.
International Depending on where you’re located, we offer next day delivery. Check your status on this link
The General Electric IC660TSD020 is a terminal assembly designed for use within the Genius I/O system. This component provides the necessary physical interface for field wiring, supporting the integration of 3-wire solid-state sensors into the Genius I/O network architecture.Features
Designed for the Genius I/O series product family.
Supports 3-wire solid-state sensor configurations.
Robust terminal assembly for reliable field signal termination.
Operating temperature range of 0 to 60 degC.
Handles inrush currents up to 10 Amps.
Technical Specifications
Product Model
IC660TSD020
Manufacturer
General Electric
Product Type
Terminal Assembly
Operating Voltage
18 to 56 Volts DC
Inrush Current
10 Amps
Operating Temperature
0 to 60 degC
Tariff Code
8537101190
Installation Guidelines
Ensure the system power is disconnected before installing or removing the terminal assembly to prevent electrical shock or equipment damage.
Verify that the operating voltage of the field devices is within the 18 to 56 VDC range specified for this module.
Maintain proper cable routing practices to minimize electromagnetic interference (EMI) within the control cabinet.
Ensure the module is securely mounted and that all terminal connections are tightened to the appropriate torque to prevent intermittent signals.
Provide adequate ventilation in the control enclosure to maintain ambient temperatures within the 0 to 60 degC operating range.
FAQWhat is the primary function of the IC660TSD020?The IC660TSD020 acts as a terminal assembly for the Genius I/O block system, facilitating the connection of field sensors and devices to the control network.Is this module compatible with 3-wire sensors?Yes, this terminal assembly is specifically designed to support 3-wire solid-state sensors.What is the operating voltage range for this unit?The unit is designed to operate within a voltage range of 18 to 56 Volts DC.
4 in stock
Delivery within 48 hours, pay afterwards
Mid weeks Monday to friday we offer next day delivery if the product is on stock and exceptions on holidays.
Weekends We offer no deliveries in the weekends.
International Depending on where you’re located, we offer next day delivery. Check your status on this link
9 in stock
Delivery within 48 hours, pay afterwards
Mid weeks Monday to friday we offer next day delivery if the product is on stock and exceptions on holidays.
Weekends We offer no deliveries in the weekends.
International Depending on where you’re located, we offer next day delivery. Check your status on this link
DescriptionThe IC655MDL580A is a Versamax series relay output module manufactured by General Electric (GE Fanuc). This module provides 16 discrete output points, designed for reliable switching of field devices in industrial control applications. Each output point is equipped with an individual LED indicator to provide real-time status monitoring of the output state.Features
16 Normally Open (N.O.) relay output points.
Individual LED status indicators for each output channel.
Integrated 20-point terminal block for secure field wiring.
Designed for integration within the Versamax I/O system architecture.
Keying positions set to A3 and B1 to ensure correct module placement.
Technical Specifications
Model Number
IC655MDL580A
Output Type
Relay (Normally Open)
Number of Outputs
16
Rated Current
2 Amps (Resistive)
Typical Supply Current
152 mA
Maximum Supply Current
180 mA
Terminal Block
20-Point
Keying Positions
A3 and B1
Installation Guidelines
Ensure the PLC system power is disconnected before installing or removing the module from the backplane.
Verify that the module keying (A3 and B1) matches the intended slot configuration to prevent improper insertion.
Use appropriate wire gauges for the 20-point terminal block to ensure secure connections and prevent overheating.
Maintain proper grounding practices to minimize electrical noise interference in the control cabinet.
Ensure adequate ventilation within the enclosure to maintain operating temperatures within the manufacturer's specified limits.
Handle with care to prevent electrostatic discharge (ESD) damage to the internal circuitry.
FAQWhat type of outputs does the IC655MDL580A provide?This module features 16 relay outputs, all of which are configured as Normally Open (N.O.).What is the current rating for the relay outputs?The relay outputs are rated for 2 Amps under resistive load conditions.How do I monitor the status of the outputs?The module includes 16 individual LED indicators, with one LED assigned to each output point for immediate visual status feedback.
9 in stock
Delivery within 48 hours, pay afterwards
Mid weeks Monday to friday we offer next day delivery if the product is on stock and exceptions on holidays.
Weekends We offer no deliveries in the weekends.
International Depending on where you’re located, we offer next day delivery. Check your status on this link
6 in stock
Delivery within 48 hours, pay afterwards
Mid weeks Monday to friday we offer next day delivery if the product is on stock and exceptions on holidays.
Weekends We offer no deliveries in the weekends.
International Depending on where you’re located, we offer next day delivery. Check your status on this link
DescriptionThe General Electric IC660EBS103 is a Genius I/O block designed for integration within the Genius I/O distributed control architecture. This module facilitates reliable communication and data exchange between field devices and the host controller, supporting both AC and DC power configurations to suit diverse industrial environments.Features
Supports versatile AC and DC power inputs.
Provides 1500 V block-to-block isolation for enhanced signal integrity and protection.
Selectable input filter times ranging from 10 to 100 mS in 10 mS increments.
Engineered for robust performance in industrial temperature ranges from 0 to 60 degC.
Compatible with the Genius I/O communication protocol.
Technical Specifications
Product Model
IC660EBS103
Product Line
Genius I/O
Isolation
1500 V
Operating Temperature
0 to 60 degC
Storage Temperature
-40 to 100 degC
Frequency
47 to 63 Hz
Humidity
5 to 95 percent (non-condensing)
Input Filter Time
10 to 100 mS (10 mS steps)
Installation Guidelines
Ensure the system power is disconnected before installing or removing the I/O block to prevent electrical damage.
Mount the unit in a clean, dry environment with adequate ventilation to maintain operating temperatures within the specified 0 to 60 degC range.
Verify that all wiring connections are secure and follow local electrical codes for industrial control equipment.
Use shielded cabling for communication lines to minimize electromagnetic interference (EMI).
Handle the module using standard ESD (Electrostatic Discharge) precautions to protect internal circuitry.
FAQWhat is the primary function of the IC660EBS103?The IC660EBS103 serves as a Genius I/O block, acting as a field-side interface for the Genius I/O network, allowing for the distributed monitoring and control of industrial processes.Can this block be used in high-humidity environments?The module is rated for operation in 5 to 95 percent non-condensing humidity. Ensure the enclosure is properly sealed if the environment exceeds these parameters.
6 in stock
Delivery within 48 hours, pay afterwards
Mid weeks Monday to friday we offer next day delivery if the product is on stock and exceptions on holidays.
Weekends We offer no deliveries in the weekends.
International Depending on where you’re located, we offer next day delivery. Check your status on this link
6 in stock
Delivery within 48 hours, pay afterwards
Mid weeks Monday to friday we offer next day delivery if the product is on stock and exceptions on holidays.
Weekends We offer no deliveries in the weekends.
International Depending on where you’re located, we offer next day delivery. Check your status on this link
DescriptionThe General Electric Multilin 750-P5-G5-HI-A1-R-E is a high-performance Feeder Management Relay from the SR750 series. Designed for the protection, control, and monitoring of electrical distribution feeders, this relay provides comprehensive protection features for industrial and utility power systems. It features advanced metering capabilities and flexible communication options to ensure reliable operation in demanding electrical environments.Features
Phase current input: 5 Amp
Ground current input: 5 Amp Zero Sequence
Sensitive current input: 5 Amp
Wide range power supply: 80-300 V DC or 70-265 V AC (48/62 Hz)
Analog output: Eight 4-20 mA channels
Visual indication: Red LED for breaker closed status
Fully isolated outputs for enhanced noise immunity
High-speed response: 100% indication in less than 3 power system cycles
Technical Specifications
Product Model
750-P5-G5-HI-A1-R-E
Manufacturer
General Electric
Power Consumption
25 VA nominal, 35 VA maximum
Make and Carry
15 A @ 250 VDC for 500 ms
Accuracy
+/- 1% of full scale
Voltage Loss Hold-up Time
30 ms
Operating Temperature
-40 degC to +60 degC
Storage Temperature
-40 degC to +85 degC
Humidity
Up to 95% (non-condensing) @ 55 degC
Installation Guidelines
Ensure the relay is installed in a clean, dry environment protected from excessive dust and moisture.
Verify that the control power supply matches the specified voltage range (80-300 V DC or 70-265 V AC) before applying power.
Use shielded cables for analog inputs and outputs to minimize electromagnetic interference (EMI).
Ensure proper grounding of the relay chassis to the panel ground bus to maintain signal integrity and safety.
Perform all wiring connections while the system is de-energized to prevent accidental short circuits or damage to the internal electronics.
Maintain adequate clearance around the unit to allow for proper heat dissipation and airflow.
FAQWhat is the primary function of the 750-P5-G5-HI-A1-R-E relay?This unit is a feeder management relay designed to provide protection, control, and monitoring for electrical distribution systems, specifically handling phase, ground, and sensitive current inputs.Does this relay require a specific power supply?Yes, this model supports a wide range of input power, specifically 80-300 V DC or 70-265 V AC at 48/62 Hz.What is the ambient operating temperature range?The device is rated for operation in temperatures ranging from -40 degC to +60 degC.
6 in stock
Delivery within 48 hours, pay afterwards
Mid weeks Monday to friday we offer next day delivery if the product is on stock and exceptions on holidays.
Weekends We offer no deliveries in the weekends.
International Depending on where you’re located, we offer next day delivery. Check your status on this link
6 in stock
Delivery within 48 hours, pay afterwards
Mid weeks Monday to friday we offer next day delivery if the product is on stock and exceptions on holidays.
Weekends We offer no deliveries in the weekends.
International Depending on where you’re located, we offer next day delivery. Check your status on this link
DescriptionThe General Electric IC660EBD024 is a Genius I/O electronics assembly designed for industrial automation applications. As part of the GE Genius I/O product line, this module provides reliable signal processing and communication capabilities within a distributed control architecture. It is engineered to support robust I/O operations in demanding industrial environments, offering high levels of electrical isolation and diagnostic feedback.Features
Integrated block-to-block isolation rated at 850 V for enhanced system protection.
Comprehensive output diagnostics, including switch fault detection.
Flexible operating voltage range of 10 to 30 V DC.
Designed for high-reliability performance with a typical DC power requirement of 150 mA.
Wide operating temperature range suitable for standard industrial control cabinets.
Technical Specifications
Model
IC660EBD024
Product Line
Genius I/O
Operating Voltage
10 to 30 V DC
Block to Block Isolation
850 V
Max Output Current
0.5 A per circuit
Min Heat Dissipation
11 Watts (with 8 inputs)
Max Heat Dissipation
18 Watts (with 32 outputs)
Operating Temperature
0 to 60 degC
Storage Temperature
-40 to 100 degC
Humidity
5 to 95 percent (non-condensing)
Installation Guidelines
Ensure the control system is powered down before installing or removing the electronics assembly to prevent electrical damage.
Mount the module in a clean, dry, and well-ventilated enclosure to maintain the specified operating temperature range.
Use appropriate shielded cabling for I/O signals to minimize electromagnetic interference (EMI).
Verify that all terminal connections are secure and that the module is properly seated in the Genius I/O block housing.
Maintain proper grounding practices to ensure the integrity of the 850 V isolation barrier.
FAQWhat is the primary function of the IC660EBD024?The IC660EBD024 serves as an electronics assembly for the Genius I/O system, facilitating the interface between field devices and the controller via the Genius I/O communication network.What are the power requirements for this module?The module operates on a DC voltage range of 10 to 30 V. It typically draws 150 mA of current, with a maximum requirement of 300 mA under load.Does this module provide diagnostic capabilities?Yes, the IC660EBD024 includes built-in output diagnostics, specifically designed to detect switch faults, which assists in troubleshooting and maintaining system uptime.
6 in stock
Delivery within 48 hours, pay afterwards
Mid weeks Monday to friday we offer next day delivery if the product is on stock and exceptions on holidays.
Weekends We offer no deliveries in the weekends.
International Depending on where you’re located, we offer next day delivery. Check your status on this link
2 in stock
Delivery within 48 hours, pay afterwards
Mid weeks Monday to friday we offer next day delivery if the product is on stock and exceptions on holidays.
Weekends We offer no deliveries in the weekends.
International Depending on where you’re located, we offer next day delivery. Check your status on this link
The General Electric IC693CHS392C is a 10-slot expansion baseplate designed for the Series 90-30 PLC platform. This unit provides additional I/O capacity for industrial control systems, allowing for the integration of up to ten I/O or option modules. It features a dedicated slot for a power supply module and utilizes a 25-pin D-shell female connector for expansion communication.Features
10-slot capacity for versatile I/O and option module configuration.
Dedicated slot for system power supply.
Compatible with Series 90-30 PLC architecture.
Robust panel-mounting design for secure installation.
Internal power consumption of 150 mA at 5 VDC.
ApplicationsThis expansion base is typically utilized in GE Series 90-30 PLC systems where additional I/O density is required beyond the capacity of the main CPU rack. It is suitable for distributed control applications, machine automation, and process monitoring systems.Technical Specifications
Product Model
IC693CHS392C
Series
Series 90-30
Slot Count
10 Slots
Power Requirements
5 VDC
Current Consumption
150 mA
Expansion Interface
25-pin D-shell female connector
Mounting Type
Panel Mount
Weight
0.94 kg
Installation Guidelines
Ensure the installation environment is restricted to indoor use only, away from excessive moisture, dust, or corrosive gases.
Mount the baseplate securely to a flat, vibration-resistant panel surface.
Always disconnect all power sources before installing or removing modules from the baseplate to prevent electrical damage.
Ensure proper grounding of the baseplate chassis to the system common ground to minimize electromagnetic interference (EMI).
Verify that the 25-pin expansion cable is firmly seated and secured to ensure reliable communication between the CPU rack and the expansion base.
Maintain adequate clearance around the unit to allow for proper ventilation and heat dissipation.
FAQCan this baseplate hold a CPU module?No, the IC693CHS392C is an expansion baseplate and does not support CPU modules. It is designed specifically for I/O and option modules.What is the primary function of the 25-pin connector?The 25-pin D-shell female connector is used to link the expansion base to the main CPU rack or another expansion base in the system chain.
2 in stock
Delivery within 48 hours, pay afterwards
Mid weeks Monday to friday we offer next day delivery if the product is on stock and exceptions on holidays.
Weekends We offer no deliveries in the weekends.
International Depending on where you’re located, we offer next day delivery. Check your status on this link
4 in stock
Delivery within 48 hours, pay afterwards
Mid weeks Monday to friday we offer next day delivery if the product is on stock and exceptions on holidays.
Weekends We offer no deliveries in the weekends.
International Depending on where you’re located, we offer next day delivery. Check your status on this link
DescriptionThe General Electric IC693CHS398F is a 5-slot expansion baseplate designed for the Series 90-30 PLC system. This unit serves as an I/O expansion rack, allowing for the addition of extra I/O modules to a Series 90-30 system configuration. It features a total of six slots: one dedicated slot for a power supply and five slots for I/O modules.Features
Designed specifically for GE Series 90-30 PLC expansion requirements.
Includes five dedicated slots for I/O modules and one slot for a power supply module.
Equipped with a 25-pin D-shell female connector for system expansion.
Rack address is configured via integrated DIP switches.
Supports panel mounting for secure installation in industrial enclosures.
Technical Specifications
Product Model
IC693CHS398F
Series
Series 90-30
Total Slots
6
I/O Slots
5
Power Supply Slots
1
Internal Power Consumption
170 mA at 5 VDC
Expansion Connector
25-pin D-shell female
Mounting Type
Panel mount
Weight
0.56 kg
Installation Guidelines
Ensure the baseplate is securely mounted to a flat, conductive panel surface to facilitate proper grounding.
A common ground is required for the baseplate to ensure stable operation and noise immunity.
Always disconnect all power sources before installing or removing modules from the baseplate slots.
Use the 25-pin D-shell connector to link the expansion base to the main CPU rack; ensure the cable is properly seated and the locking screws are tightened.
Configure the rack address using the onboard DIP switches before applying power to the system.
Maintain adequate clearance around the baseplate to allow for proper ventilation and heat dissipation.
FAQWhat is the primary function of the IC693CHS398F?This module acts as an expansion baseplate for the GE Series 90-30 PLC, providing additional slots to increase the I/O capacity of the control system.How is the rack address determined?The rack address for this expansion base is set manually using the DIP switches located on the unit.Can this baseplate be used with any power supply?It is designed to house one Series 90-30 compatible power supply module in the designated slot.
4 in stock
Delivery within 48 hours, pay afterwards
Mid weeks Monday to friday we offer next day delivery if the product is on stock and exceptions on holidays.
Weekends We offer no deliveries in the weekends.
International Depending on where you’re located, we offer next day delivery. Check your status on this link
10 in stock
Delivery within 48 hours, pay afterwards
Mid weeks Monday to friday we offer next day delivery if the product is on stock and exceptions on holidays.
Weekends We offer no deliveries in the weekends.
International Depending on where you’re located, we offer next day delivery. Check your status on this link
DescriptionThe General Electric A06B-0143-B175 is a high-performance AC servo motor designed for precision motion control in CNC machinery. This unit, part of the A12/3000 series, features an integrated brake and a straight shaft configuration, providing reliable torque and positioning accuracy for demanding industrial automation applications.Features
Integrated brake for secure holding and emergency stopping
Straight shaft design for standard mechanical coupling
Rated for 2.8 kW power output
Optimized for 3000 RPM operation
Robust 3-phase AC design
ApplicationsThis servo motor is primarily utilized in CNC machine tools, robotic systems, and automated manufacturing lines requiring high-speed, high-precision rotational control.Technical Specifications
Model
A06B-0143-B175
Rated Voltage
155 V
Rated Current
12 A (rms)
Max Current
20 A (rms)
Rated Power
2.8 kW
Rated Speed
3000 RPM
Frequency
200 Hz
Power Factor
0.95
Operating Temperature
0 degC to +40 degC
Storage Temperature
-20 degC to +85 degC
Humidity
20 to 90 % RH (non-condensing)
Installation Guidelines
Ensure the motor is mounted on a rigid, vibration-free surface to prevent mechanical resonance.
Verify that the shaft alignment is precise to avoid excessive radial or axial load on the bearings.
Use shielded cables for power and encoder connections to minimize electromagnetic interference (EMI).
Ensure adequate ventilation around the motor housing to maintain operating temperatures within the specified 0 to 40 degC range.
Always disconnect power before performing any wiring, inspection, or maintenance on the motor or its drive interface.
Confirm that the grounding path is secure and follows local electrical safety standards to prevent ground loops.
FAQWhat is the primary function of the A06B-0143-B175?This is an AC servo motor used for precise motion control in CNC systems, capable of delivering 2.8 kW of power at 3000 RPM.Does this motor include a brake?Yes, this model (A06B-0143-B175) is equipped with an integrated brake for holding applications.What are the environmental requirements for this motor?The motor should be operated in an ambient temperature range of 0 degC to 40 degC with a non-condensing humidity level between 20% and 90%.
10 in stock
Delivery within 48 hours, pay afterwards
Mid weeks Monday to friday we offer next day delivery if the product is on stock and exceptions on holidays.
Weekends We offer no deliveries in the weekends.
International Depending on where you’re located, we offer next day delivery. Check your status on this link
3 in stock
Delivery within 48 hours, pay afterwards
Mid weeks Monday to friday we offer next day delivery if the product is on stock and exceptions on holidays.
Weekends We offer no deliveries in the weekends.
International Depending on where you’re located, we offer next day delivery. Check your status on this link
DescriptionThe General Electric IC600CB526 is an Expanded Logic Control Module designed for the Series Six programmable logic controller system. This module serves as a critical component in managing complex logic operations and expanding the control capabilities of the Series Six architecture. As a legacy component, it is frequently utilized in industrial automation environments to maintain or extend the functionality of established GE Fanuc control systems.Features
Designed specifically for integration with the GE Series Six PLC platform.
Facilitates expanded logic processing and control functions.
Robust construction suitable for industrial control cabinet environments.
Compatible with legacy Series Six hardware configurations.
ApplicationsThis module is primarily used in industrial manufacturing, power generation, and process control applications where the Series Six PLC system is deployed. It is intended for use in systems requiring additional logic capacity or as a direct replacement for existing control modules in aging infrastructure.Technical Specifications
Manufacturer
General Electric
Product Type
Expanded Logic Control Module
Series
Series Six
Model Number
IC600CB526
Associated Part Numbers
IC600FP501K, IC600CB526R
Tariff Code
8537101190
Installation Guidelines
Ensure the PLC system is powered down before attempting to insert or remove the module from the rack.
Handle the module by the edges to prevent electrostatic discharge (ESD) damage to the internal circuitry.
Verify that the module is fully seated in the designated backplane slot to ensure proper electrical contact.
Maintain adequate ventilation within the control cabinet to prevent overheating during operation.
Ensure all cable connections are secure and routed away from high-voltage lines to minimize electromagnetic interference (EMI).
FAQIs the IC600CB526 still being manufactured?No, this module has been discontinued by the manufacturer. It is typically sourced through surplus or refurbished channels for maintenance of legacy systems.What systems is this module compatible with?The IC600CB526 is designed for use with the GE Series Six PLC system. Please verify your specific rack configuration and firmware requirements before installation.
3 in stock
Delivery within 48 hours, pay afterwards
Mid weeks Monday to friday we offer next day delivery if the product is on stock and exceptions on holidays.
Weekends We offer no deliveries in the weekends.
International Depending on where you’re located, we offer next day delivery. Check your status on this link
6 in stock
Delivery within 48 hours, pay afterwards
Mid weeks Monday to friday we offer next day delivery if the product is on stock and exceptions on holidays.
Weekends We offer no deliveries in the weekends.
International Depending on where you’re located, we offer next day delivery. Check your status on this link
DescriptionThe A20B-2004-038 is a high-performance control card designed for use within Fanuc CNC systems. This printed circuit board (PCB) serves as a critical component for managing machine logic, signal processing, and command execution in industrial automation environments. Engineered for reliability, it provides the necessary computational capacity to support precise CNC operations.Features
Integrated 32-bit CPU for high-speed processing of control instructions.
Designed for seamless integration into existing Fanuc CNC control architectures.
Robust construction suitable for demanding industrial environments.
Low power consumption profile, optimized for efficient system operation.
Technical Specifications
Model
A20B-2004-038
Manufacturer
General Electric / Fanuc
Primary Supply
24 V DC
Power Consumption
≤ 15 W
Isolation
500 V DC
Operating Temperature
-10 degC to +55 degC
Storage Temperature
-25 degC to +85 degC
Humidity
5 - 95 % RH (non-condensing)
Installation Guidelines
ESD Protection: Always use a grounded wrist strap when handling the PCB to prevent electrostatic discharge damage.
Power Down: Ensure the CNC system is fully powered down and disconnected from the main supply before attempting to install or remove the control card.
Seating: Ensure the card is firmly seated in the designated slot and that all retaining mechanisms are engaged to prevent vibration-related disconnects.
Environment: Install in a clean, dry, and well-ventilated enclosure to maintain the specified operating temperature range.
Cabling: Ensure all signal cables are properly routed away from high-voltage lines to minimize electromagnetic interference (EMI).
FAQWhat is the primary function of the A20B-2004-038?This module acts as a control card for Fanuc CNC systems, handling internal logic and processing tasks essential for machine tool operation.Is this card compatible with all Fanuc systems?This card is specific to the A20B-2004-038 part number. Please verify your existing hardware revision and system documentation to ensure compatibility before installation.What are the storage requirements for this PCB?The module should be stored in a climate-controlled environment within the specified temperature range of -25 degC to +85 degC and kept free from moisture and corrosive agents.
6 in stock
Delivery within 48 hours, pay afterwards
Mid weeks Monday to friday we offer next day delivery if the product is on stock and exceptions on holidays.
Weekends We offer no deliveries in the weekends.
International Depending on where you’re located, we offer next day delivery. Check your status on this link
8 in stock
Delivery within 48 hours, pay afterwards
Mid weeks Monday to friday we offer next day delivery if the product is on stock and exceptions on holidays.
Weekends We offer no deliveries in the weekends.
International Depending on where you’re located, we offer next day delivery. Check your status on this link
DescriptionThe General Electric IC660EBD020 is a high-performance Electronics Assembly module from the Genius I/O product series. Designed for industrial automation environments, this block I/O module serves as a critical interface for managing discrete signals within a distributed control architecture. It is engineered to provide robust signal processing and reliable communication between field devices and the primary control system.Features
Sixteen (16) discrete inputs for comprehensive signal monitoring.
Wide operating voltage range of 18-56V DC, supporting nominal 24V DC systems.
High-level block-to-block isolation of 1500V to protect sensitive control circuitry from field-side transients.
Designed for high-reliability applications with a thermal drift specification of 70 PPM per degree Celsius.
Integrated heat dissipation management rated at 68.8 Watts.
Technical Specifications
Model
IC660EBD020
Series
Genius I/O
Module Type
Electronic Assembly / Block I/O
Discrete Inputs
16
Input Voltage Range
18-56V DC
Nominal Input Voltage
24V DC
Power Requirements
150 mA / 300 mA (max)
Heat Dissipation
68.8 Watts
Operating Temperature
0 degC to 60 degC
Storage Temperature
-40 degC to 100 degC
Thermal Drift
70 PPM/degC
Installation Guidelines
Ensure the control system is powered down before installing or removing the module from the I/O bus.
Mount the module in an environment that allows for adequate ventilation, adhering to the 68.8W heat dissipation requirement.
Use shielded cabling for all I/O connections to minimize electromagnetic interference (EMI) in industrial settings.
Verify that the power supply voltage is within the 18-56V DC range before energizing the block.
Handle the module using proper ESD (Electrostatic Discharge) prevention techniques to avoid damaging internal electronic components.
FAQWhat is the primary function of the IC660EBD020?The IC660EBD020 is a Genius Block I/O module used for discrete input signal acquisition within a GE Genius I/O network, allowing for distributed control of field devices.What are the power requirements for this module?The module operates on a DC power supply ranging from 18V to 56V, with a maximum current draw of 300 mA.Is this module suitable for high-temperature environments?The module is rated for an operating temperature range of 0 degC to 60 degC. It should be installed in a climate-controlled enclosure or area that does not exceed these limits to ensure long-term reliability.
8 in stock
Delivery within 48 hours, pay afterwards
Mid weeks Monday to friday we offer next day delivery if the product is on stock and exceptions on holidays.
Weekends We offer no deliveries in the weekends.
International Depending on where you’re located, we offer next day delivery. Check your status on this link
1 in stock
Delivery within 48 hours, pay afterwards
Mid weeks Monday to friday we offer next day delivery if the product is on stock and exceptions on holidays.
Weekends We offer no deliveries in the weekends.
International Depending on where you’re located, we offer next day delivery. Check your status on this link
DescriptionThe DS200LRPAG1AGF is a specialized Line Protection Printed Circuit Card engineered for the General Electric Mark V Speedtronic turbine control system and EX2000 excitation interfaces. This LRPA-acronym board provides essential monitoring and circuit protection for gas and steam turbine management infrastructures. Designed to support both Triple Modular Redundant (TMR) and Simplex configurations, it plays a critical role in safeguarding electrical lines within power generation plants and heavy industrial facilities. By maintaining the integrity of the EX2000 interface, this module minimizes system faults and prevents extensive downtime in high-stakes utility operations.Features
Designed for integration with GE Mark V and EX2000 excitation systems.
Supports both Simplex and TMR (Triple Modular Redundant) system configurations.
Equipped with one onboard reset switch for manual hardware initialization and diagnostic support.
Features standard industrial PCB coating for enhanced environmental protection.
Optimized for high-speed signal processing and reliable line protection logic.
Hardware revision level 3, providing refined signal isolation and improved response times.
ApplicationsThis module is primarily utilized in power generation environments, specifically within gas and steam turbine control systems. It is a critical component for line protection in EX2000 excitation interfaces, ensuring the stability and safety of electrical distribution and management systems in heavy industrial plants.Technical Specifications
Model
DS200LRPAG1AGF
Brand
General Electric (GE)
Series
Mark V / EX2000
Functional Acronym
LRPA
Module Type
Line Protection Card
Reset Configuration
1 Onboard Switch
Coating
Normal Industrial
Operating Temperature
0 to 60 deg C
Humidity Range
5 to 95 percent non-condensing
Installation Guidelines
Ensure the control system is powered down before installing or removing the circuit card to prevent electrical damage.
Handle the card using proper ESD (Electrostatic Discharge) mitigation techniques, such as wearing a grounded wrist strap.
Ensure the module is fully seated in the designated Mark V rack slot to maintain proper backplane communication.
Verify that the environment meets the specified temperature and humidity ranges to ensure long-term reliability.
Inspect the board for any physical damage or debris before installation.
FAQDoes this card require firmware updates?No, the DS200LRPAG1AGF is designed with fixed, stable logic and does not require field firmware updates for operation.Is this module compatible with TMR systems?Yes, this card is engineered to support both Simplex and Triple Modular Redundant (TMR) configurations within the Mark V and EX2000 architecture.
1 in stock
Delivery within 48 hours, pay afterwards
Mid weeks Monday to friday we offer next day delivery if the product is on stock and exceptions on holidays.
Weekends We offer no deliveries in the weekends.
International Depending on where you’re located, we offer next day delivery. Check your status on this link
6 in stock
Delivery within 48 hours, pay afterwards
Mid weeks Monday to friday we offer next day delivery if the product is on stock and exceptions on holidays.
Weekends We offer no deliveries in the weekends.
International Depending on where you’re located, we offer next day delivery. Check your status on this link
DescriptionThe General Electric HE693PBM101 is a specialized network module designed for the Series 90-30 PLC platform. This module functions as a Profibus Master, enabling the PLC to communicate with and control various Profibus-DP slave devices within an industrial automation network. It provides a robust interface for distributed I/O, drives, and other field devices, facilitating seamless data exchange and system expansion in complex control architectures.Features
Designed specifically for integration with the GE Fanuc Series 90-30 PLC system.
Acts as a Profibus Master, supporting high-speed communication with slave nodes.
Includes an RS-232 interface for configuration and diagnostic purposes.
Enables efficient distributed control by offloading communication tasks from the main CPU.
Compact module design for standard Series 90-30 rack mounting.
ApplicationsThis module is widely utilized in manufacturing and process control environments where Profibus-DP protocol is required for fieldbus communication. Typical applications include motor control centers, remote I/O stations, and integration of third-party instrumentation into the GE 90-30 control ecosystem.Technical Specifications
Product Model
HE693PBM101
Manufacturer
General Electric
Module Type
Profibus Master Network Module
Series
Series 90-30
Interface
Profibus-DP, RS-232
Weight
0.34 kg
Installation Guidelines
Ensure the PLC rack power is disconnected before installing or removing the module to prevent electrical damage.
Slide the module into an available slot in the Series 90-30 baseplate, ensuring the backplane connector is fully seated.
Secure the module using the integrated mounting screws to ensure proper grounding and mechanical stability.
Use shielded Profibus-rated cabling for all network connections to minimize EMI interference.
Verify that the module configuration matches the network baud rate and slave address settings via the PLC programming software.
Maintain adequate ventilation around the rack to prevent overheating during continuous operation.
FAQWhat is the primary function of the HE693PBM101?The HE693PBM101 acts as a Profibus Master module, allowing a GE Series 90-30 PLC to manage and communicate with Profibus-DP compatible field devices.Is this module compatible with other PLC series?No, this module is specifically engineered for the GE Series 90-30 PLC backplane architecture.Does this module require external power?The module draws its operating power directly from the Series 90-30 PLC rack backplane.
6 in stock
Delivery within 48 hours, pay afterwards
Mid weeks Monday to friday we offer next day delivery if the product is on stock and exceptions on holidays.
Weekends We offer no deliveries in the weekends.
International Depending on where you’re located, we offer next day delivery. Check your status on this link
10 in stock
Delivery within 48 hours, pay afterwards
Mid weeks Monday to friday we offer next day delivery if the product is on stock and exceptions on holidays.
Weekends We offer no deliveries in the weekends.
International Depending on where you’re located, we offer next day delivery. Check your status on this link
DescriptionThe IS200TBTCH1C is a high-density Thermocouple Input Terminal Board designed for the General Electric Mark VIe distributed control system. This board serves as the primary interface between field-mounted thermocouple sensors and the system's I/O processor packs. It is engineered to support mission-critical turbine control applications, providing reliable signal acquisition for 24 independent channels. The board is compatible with multiple thermocouple types, including E, J, K, S, and T, and supports flexible system architectures ranging from simplex to triple modular redundant (TMR) configurations.Features
Supports 24 independent thermocouple input channels.
Compatible with thermocouple types E, J, K, S, and T.
Direct interface for PTCC I/O packs via onboard J-type connectors.
Supports Simplex, Dual, and TMR system configurations.
Integrated shield terminal strips for improved noise immunity and signal integrity.
Accommodates field wiring up to 12 AWG via barrier-type terminal blocks.
ApplicationsThe IS200TBTCH1C is specifically designed for use in GE Mark VIe control systems, primarily found in power generation, turbine control, and heavy industrial process monitoring where high-precision temperature measurement and system redundancy are required.Technical Specifications
Model
IS200TBTCH1C
Series
Mark VIe
Input Channels
24
Supported Thermocouples
E, J, K, S, T
Input Span
-8 mV to +45 mV
Operating Temperature
0 to 45 deg C
Wiring Capacity
Up to 12 AWG
System Compatibility
PTCC I/O Packs
Installation Guidelines
Ensure the control system power is disconnected before installing or removing the terminal board or associated I/O packs.
Mount the board securely within the designated Mark VIe cabinet rack.
Utilize the dedicated shield terminal strips on the left side of the terminal blocks to ground cable shields, reducing the risk of electromagnetic interference (EMI).
Ensure proper seating of PTCC I/O packs into the board connectors to maintain reliable signal path continuity.
Maintain ambient operating temperatures within the specified 0 to 45 deg C range to ensure long-term component reliability.
FAQIs the IS200TBTCH1C compatible with all Mark VIe I/O packs?This board is specifically designed to interface with PTCC I/O packs. Please verify your specific system configuration and I/O pack requirements before installation.Does this board support TMR configurations?Yes, the IS200TBTCH1C is engineered to support Simplex, Dual, and Triple Modular Redundant (TMR) configurations, allowing for high-availability control architectures.
10 in stock
Delivery within 48 hours, pay afterwards
Mid weeks Monday to friday we offer next day delivery if the product is on stock and exceptions on holidays.
Weekends We offer no deliveries in the weekends.
International Depending on where you’re located, we offer next day delivery. Check your status on this link
10 in stock
Delivery within 48 hours, pay afterwards
Mid weeks Monday to friday we offer next day delivery if the product is on stock and exceptions on holidays.
Weekends We offer no deliveries in the weekends.
International Depending on where you’re located, we offer next day delivery. Check your status on this link
DescriptionThe General Electric IC670CHS002E is a high-reliability I/O terminal block designed for the GE Fanuc Field Control series. This component serves as the physical interface for field wiring, providing a secure and organized connection point for I/O modules within the control system architecture. It is engineered to support hot-swapping, allowing for maintenance and module replacement without requiring a complete system shutdown.Features
Supports up to 2 I/O modules per terminal block.
Equipped with 37 terminals for versatile field wiring configurations.
Hot-swap compatible design for enhanced system availability.
Maximum current rating of 10 Amperes per terminal.
Compatible with Field Control modules featuring a catalog number suffix of J or higher.
Technical Specifications
Model
IC670CHS002E
Series
Field Control
Component Type
I/O Terminal Block
Terminal Count
37
Max Current
10 A
Module Capacity
2 Modules
Wiring Capacity
1 x AWG #14 or 2 x AWG #18-22
Tariff Code
8537101190
Installation Guidelines
Ensure the control system is powered down before installing or removing modules from the terminal block.
Verify that the I/O module revision (suffix J or higher) is compatible with this terminal block version.
Follow proper torque specifications for terminal screws to ensure secure wire retention and prevent intermittent connections.
Maintain adequate spacing for heat dissipation in the control cabinet to ensure long-term reliability.
Use shielded cabling where required by the application to minimize EMI interference in industrial environments.
FAQIs the IC670CHS002E compatible with older Field Control modules?This terminal block is specifically designed for modules with a catalog number suffix of J or higher. Please verify your module revision before installation.Does this terminal block support hot-swapping?Yes, the IC670CHS002E is designed to be hot-swap compatible, allowing for module replacement while the system is operational, provided the installation environment and safety protocols allow for it.
10 in stock
Delivery within 48 hours, pay afterwards
Mid weeks Monday to friday we offer next day delivery if the product is on stock and exceptions on holidays.
Weekends We offer no deliveries in the weekends.
International Depending on where you’re located, we offer next day delivery. Check your status on this link
3 in stock
Delivery within 48 hours, pay afterwards
Mid weeks Monday to friday we offer next day delivery if the product is on stock and exceptions on holidays.
Weekends We offer no deliveries in the weekends.
International Depending on where you’re located, we offer next day delivery. Check your status on this link
DescriptionThe IS200VTCCH1C is a thermocouple input module designed for the General Electric Mark VIe control system. This module serves as a critical interface for monitoring temperature signals from thermocouple sensors throughout industrial processes. It converts low-level voltage signals from thermocouples into digital data for processing by the Mark VIe controller, ensuring precise temperature monitoring and protection for critical rotating machinery and power generation assets.Features
Designed for integration with the GE Mark VIe control platform.
Supports high-accuracy thermocouple signal acquisition.
Provides robust signal conditioning for industrial environments.
Compact board-level design for rack-mounted I/O configurations.
Compatible with standard thermocouple types used in power plant applications.
ApplicationsThis module is primarily utilized in power generation, oil and gas, and heavy industrial applications where precise temperature monitoring is required. It is commonly found in gas turbine control systems, steam turbine monitoring, and balance-of-plant (BOP) control architectures.Technical Specifications
Manufacturer
General Electric
Model Series
Mark VIe
Part Number
IS200VTCCH1C
Function
Thermocouple Input Module
Weight
0.28 kg
Tariff Code
8537101190
Installation Guidelines
ESD Protection: Always wear a grounded anti-static wrist strap when handling the module to prevent damage to sensitive electronic components.
Power Down: Ensure the I/O rack power is disconnected before installing or removing the module from the chassis.
Seating: Ensure the module is fully seated in the designated slot and that the retaining screws are tightened to ensure proper grounding and mechanical stability.
Wiring: Use shielded thermocouple extension wire to minimize electromagnetic interference (EMI). Ensure proper polarity is maintained during termination.
Environment: Maintain the module within the specified operating temperature range and ensure adequate ventilation within the control cabinet.
FAQIs this module compatible with the Mark VI system?The IS200VTCCH1C is specifically designed for the Mark VIe series. While it shares functional similarities with older Mark VI components, please verify your specific system revision and hardware compatibility before installation.What should I do if the module shows a fault?First, verify that all thermocouple connections are secure and that there are no open circuits in the field wiring. Check the Mark VIe diagnostic software for specific error codes related to the input channel. If the fault persists, it may indicate a hardware failure requiring module replacement.
3 in stock
Delivery within 48 hours, pay afterwards
Mid weeks Monday to friday we offer next day delivery if the product is on stock and exceptions on holidays.
Weekends We offer no deliveries in the weekends.
International Depending on where you’re located, we offer next day delivery. Check your status on this link
6 in stock
Delivery within 48 hours, pay afterwards
Mid weeks Monday to friday we offer next day delivery if the product is on stock and exceptions on holidays.
Weekends We offer no deliveries in the weekends.
International Depending on where you’re located, we offer next day delivery. Check your status on this link
DescriptionThe General Electric IS200TAMBH1ACB is an Acoustic Monitoring Terminal Board designed for use within the Mark VIe control system architecture. This terminal board serves as a critical interface for acoustic monitoring applications, facilitating the signal conditioning and routing required for high-precision monitoring tasks in industrial environments. It is engineered to support the integration of acoustic sensors into the broader control system, ensuring reliable data acquisition and system performance.Features
Designed for seamless integration with the Mark VIe control platform.
Supports 4-20 mA current input circuits for acoustic sensor connectivity.
Provides a regulated +24 V DC power supply for field instrumentation.
Robust construction suitable for demanding industrial monitoring environments.
Compatible with IS200TAMBH1A spare model configurations.
Technical Specifications
Product Model
IS200TAMBH1ACB
Spare Model
IS200TAMBH1A
Manufacturer
General Electric
Power Supply
+24 V DC
Input Type
4-20 mA circuits
Operating Temperature
0 degC to 60 degC
Storage Temperature
-40 degC to 85 degC
Humidity
10% to 95% RH (non-condensing)
Installation Guidelines
Ensure the control system power is completely disconnected before attempting to install or remove the terminal board.
Handle the module using proper ESD (Electrostatic Discharge) mitigation techniques to prevent damage to sensitive electronic components.
Verify that the terminal board is securely seated in the designated rack slot to ensure proper backplane communication.
Ensure all field wiring is routed correctly, keeping signal cables separated from high-voltage power lines to minimize EMI/RFI interference.
Confirm that the +24 V DC supply voltage is within the specified operating range before energizing the system.
FAQWhat is the primary function of the IS200TAMBH1ACB?This board is an acoustic monitoring terminal board used in GE Mark VIe systems to process and interface signals from acoustic sensors, typically used for monitoring equipment health and vibration characteristics.Is this board compatible with the IS200TAMBH1A?Yes, the IS200TAMBH1ACB is designed to be compatible with the IS200TAMBH1A spare model configuration.What are the environmental requirements for this module?The module should be operated in an environment with a temperature range of 0 degC to 60 degC and a non-condensing humidity level between 10% and 95%.
6 in stock
Delivery within 48 hours, pay afterwards
Mid weeks Monday to friday we offer next day delivery if the product is on stock and exceptions on holidays.
Weekends We offer no deliveries in the weekends.
International Depending on where you’re located, we offer next day delivery. Check your status on this link
