The PACSystems RX3i & RX7i series provides advanced, modular PLC solutions. These systems offer scalable performance, high-speed communication, and robust reliability, ideal for complex industrial automation projects.
GE PACSystems RX3i & RX7i
-
General Electric GE IC695ALG704 RX3i 4-Channel Non-Isolated Analog Output Module
Product Description The IC695ALG704 by GE (Emerson Automation) is a high-performance, 4-channel analog output module designed for the PACSystems RX3i platform. This module delivers precise voltage and current signals for controlling industrial actuators such as valves, dampers, and motor drives, supporting dynamic process environments with rapid updates and software-configurable ranges. Key Features Four independent, non-isolated analog output channels Configurable voltage and current output ranges without hardware jumpers High-resolution outputs for precise control: up to 16-bit for voltage, ~15.9-bit for current Fast channel update rate of 8 milliseconds for dynamic processes Integrated diagnostics and alarms to monitor module performance Designed for harsh industrial environments with temperature range –20°C to +70°C Technical Specifications Parameter Specification Channels 4 analog outputs (non-isolated) Output Voltage 0–10 V, ±10 V Output Current 0–20 mA, 4–20 mA Resolution 0–10 V: 14.9-bit, ±10 V: 15.9-bit, 0–20 mA: 15.9-bit, 4–20 mA: 15.6-bit Update Rate 8 ms per channel Output Load Voltage: ≤2 kΩ, Current: ≤850 Ω Power Supply +3.3 VDC @ 375 mA, +24 VDC @ 160 mA Accuracy ±0.15% FS @ 25°C, ±0.30% FS @ 60°C Output Protection -30 V for 60 s, +30 V for 1 hr Settling Time 2 ms (0–95% output) Operating Environment Temperature: –20°C to +70°C, Humidity: 5–95% non-condensing Dimensions 118 × 72 × 35 mm Weight 300 g Compatibility PACSystems RX3i, CPU v3.0+, terminal blocks IC694TBB032 & IC694TBS032 Applications The IC695ALG704 is ideal for process control, manufacturing automation, energy systems, and any industrial setting requiring rapid, high-precision analog signal generation. It supports fast-acting valves, motors, and dampers, enabling smooth and accurate control in complex automation setups. FAQ Q: Can this module handle both current and voltage outputs simultaneously?A: Each channel can be configured individually for either voltage or current output. Q: Is isolation required for installation?A: This module is non-isolated; ensure system-level isolation if required. Q: Are software updates needed for compatibility?A: Ensure the RX3i CPU is version 3.0 or higher for full compatibility.
$200.00 $100.00
-
General Electric GE Fanuc IC694MDL752 RX3i 32-Point Negative Logic Output Module
Product Description The IC694MDL752 is a high-density 32-point DC output module for the PACSystems RX3i series, designed for precise, high-speed discrete control applications. This negative-logic (sinking) module supports TTL 5 V loads for low-power electronics as well as 12/24 V industrial loads such as relays, solenoids, lamps, and valves. The module organizes outputs into four isolated groups of eight points, each with its own common, allowing mixed-voltage operation on the same module. Optical isolation and internal pull-up resistors enhance noise immunity and signal reliability. Each point features an individual LED for real-time status indication. Technical Specifications Output Characteristics Number of Outputs: 32 points (4 groups × 8) Output Type: Negative logic (active-low, sinking) Voltage Range: TTL Mode 4.75–5.25 VDC; 12/24 V Mode 10.2–28.8 VDC Maximum Current per Point: TTL 25 mA; 12/24 V 0.5 A Maximum Current per Group: 4 A total; 3 A per common pin (two pins per group) Internal Pull-up Resistor: Yes, active in TTL mode Isolation Ratings Field to Backplane: 250 VAC continuous; 1500 VAC for 1 minute (optical) Group to Group: 50 VAC continuous; 500 VAC for 1 minute Power Requirements Backplane Power Draw: 260 mA @ 5 VDC max User Load Power: External 5 V, 12 V, or 24 V supply required depending on mode Mechanical & Installation Dimensions: 34 × 145 × 140 mm Mounting: RX3i I/O slots, any position Terminal Blocks: Compatible with IC694TBB032 / IC694TBS032 Status Indicators: 32 individual LEDs Performance Maximum Response Time: 0.5 ms On-State Voltage Drop: TTL Mode 0.4 V max; 12/24 V Mode 0.24 V max Off-State Leakage Current: 0.1 mA max Environmental Ratings Operating Temperature: 0 °C to 60 °C Key Features 32-point negative logic DC output with four isolated groups Supports TTL (5 V) and 12/24 V industrial loads simultaneously Individual LEDs for each output point Optically isolated outputs for enhanced noise immunity Compact, high-density design for RX3i PLC racks Fast 0.5 ms response time for high-speed control applications Applications Ideal for discrete control of relays, solenoids, lamps, valves, and other mixed-voltage industrial devices in manufacturing, process automation, and distributed control systems. FAQ Q: Can this module drive mixed voltage loads simultaneously?A: Yes, each group can be configured for TTL or 12/24 VDC independently. Q: What is the maximum current per output?A: TTL mode: 25 mA per point; 12/24 V mode: 0.5 A per point. Q: Are the outputs isolated?A: Yes, each group is optically isolated, and field-to-backplane isolation is rated 250 VAC continuous.
$200.00 $100.00
-
General Electric GE Fanuc IC694CHS398 RX3i 5-Slot Serial Expansion Backplane
Product Description The IC694CHS398 is a 5-slot serial expansion backplane engineered for PACSystems RX3i, enabling high-speed remote I/O expansion. This module allows the installation of additional RX3i or Series 90‑30 I/O modules in distributed locations while maintaining robust communication with the main CPU baseplate. Designed for scalable automation systems, the IC694CHS398 supports up to 50 ft (15 m) of expansion cabling and requires a dedicated Serial Expansion Power Supply in the leftmost slot (IC694PWR321, IC694PWR330, or IC694PWR331). Hot-swap of modules is not supported on this backplane, ensuring stable serial communication across chained expansion racks. Technical Specifications Backplane Characteristics Type: Serial Expansion Backplane Slots: 5 Compatible Modules: RX3i I/O modules (standard and high-speed serial) Leftmost Slot Requirement: Serial Expansion Power Supply required Hot-Swap: Not supported Expansion Connector: 25-pin D-type for daisy-chain connection Electrical Specifications Operating Voltage: 5 VDC Internal Current Draw: 170 mA Power Consumption: 0.85 W Compatible Power Supplies: IC694PWR321, IC694PWR330, IC694PWR331 Expansion & Distance Supports up to seven serial expansion backplanes in a chain Maximum cable distance between backplanes: 50 ft (15 m) Requires DIP-switch configuration for correct rack addressing Mechanical & Physical Dimensions (H × W × D): 5.12 × 10.43 × 5.59 in (130 × 265 × 142 mm) Weight: 1.19 lbs Mounting: Panel or enclosure Environmental Ratings Operating Temperature: 0 °C to 60 °C Storage Temperature: –40 °C to +85 °C Protection: IP20 Key Features 5-slot serial expansion backplane for RX3i PACSystems High-speed serial I/O extension with daisy-chain capability Compatible with RX3i and Series 90‑30 modules Requires serial expansion power supply in the leftmost slot Supports up to 50 ft (15 m) cabling for distributed I/O Industrial-grade construction suitable for scalable systems Applications Ideal for distributed or remote I/O installations, modular control systems, and large-scale PACSystems RX3i expansions requiring reliable serial communication. FAQ Q: Can I hot-swap modules on this backplane?A: No, hot-swap is not supported; all modules must be installed with power off. Q: What power supply is required?A: The leftmost slot must contain IC694PWR321, IC694PWR330, or IC694PWR331. Q: How far can expansion racks be from the main CPU?A: Up to 50 ft (15 m) using recommended cabling. Q: How many expansion backplanes can I chain together?A: Up to seven serial expansion backplanes.
$200.00 $100.00
-
General Electric GE Fanuc IC695TBB132 RX3i Extended 36-Terminal Block
Product Description The IC695TBB132 is a 36-point, extended-depth terminal block designed for PACSystems RX3i IC695-series I/O modules. Engineered for industrial field wiring, it provides secure screw-type connections and an extra-deep shroud to accommodate thicker AC wiring and large cable bundles. Functionally equivalent to the standard IC695TBB032, the IC695TBB132 adds 13 mm of depth to improve strain relief, simplify cable routing, and support high-density wiring in compact control panels. This terminal block supports both solid and stranded conductors (#14–26 AWG) and features a 7 in-lb torque rating for reliable connections under industrial vibration conditions. Technical Specifications Mechanical & Wiring Terminal Type: Screw-type, box-style Number of Terminals: 36 Wire Gauge Supported: #14–26 AWG (solid or stranded) Wire Strip Length: 0.310 in (7.87 mm) Torque Rating: 7 in-lb (0.79 N·m) Extended Depth: +13 mm (0.5 in) compared to standard models Purpose of Extended Depth: Supports thicker AC wiring and large bundles Dimensions: 6 × 6 × 1.3 in (152 × 152 × 33 mm) Weight: 3 lbs Compatibility PACSystems RX3i IC695-series high-density I/O modules Series 90‑30 equivalent modules Supports discrete, analog, and specialty 36-point modules Environmental Ratings Operating Temperature: 0 °C to 60 °C Storage Temperature: –40 °C to +85 °C Humidity: 5–95% non-condensing Functional Features 36 individually accessible screw terminals for field wiring Extra-deep shroud reduces stress on wires and improves cable management Designed for high-density AC and I/O wiring Secure clamping under vibration Easy installation and removal without disturbing module electronics Key Features Extended-depth terminal block with 36 screw terminals 13 mm additional depth for thick insulation and large wire bundles Supports #14–26 AWG solid or stranded wires 7 in-lb torque for reliable connections Ideal for high-density PACSystems RX3i IC695-series modules Durable industrial-grade construction Applications Suitable for industrial control panels, motor control centers, process automation wiring, and high-density AC I/O module installations where space is limited. FAQ Q: How does IC695TBB132 differ from IC695TBB032?A: The TBB132 adds 13 mm of depth to improve strain relief and manage thicker wires while remaining functionally identical. Q: Can it support stranded wires?A: Yes, both solid and stranded wires from #14–26 AWG are supported. Q: Is it compatible with older Series 90‑30 modules?A: Yes, it works with high-density Series 90‑30 modules without modifications. Q: Can it handle industrial vibration?A: Yes, screw-type terminals maintain secure clamping under vibration.
$200.00 $100.00
-
General Electric GE Fanuc IC694TBB132 RX3i Extended 36-Terminal Block
Product Description The IC694TBB132 is a high-density, extended-depth terminal block engineered for PACSystems RX3i and Series 90-30 high-density I/O modules. Designed for industrial field wiring, this module provides 36 screw-type terminals with secure torque-rated connections, optimized for thicker insulated AC wiring and crowded control panels. Its extra-deep shroud extends 13 mm beyond standard terminal blocks, offering improved wire routing, strain relief, and installation flexibility. The IC694TBB132 supports standard solid or stranded wire sizes from #14–26 AWG and includes a built-in strip-length guide for consistent and reliable connections. It is fully compatible with high-density RX3i and Series 90-30 I/O modules without requiring modification, making it an ideal solution for retrofit and new installations. Technical Specifications Mechanical & Wiring Terminal Type: Screw-type, box-style Number of Terminals: 36 Wire Gauge Supported: #14–26 AWG (solid or stranded) Wire Strip Length: 0.310 in (7.87 mm) Torque Rating: 7 lb-in (0.79 N·m) Extended Depth: 13 mm deeper than standard TBB032 models Dimensions: 152 × 152 × 33 mm (6 × 6 × 1.3 in) Weight: 0.35 lbs Environmental Ratings Operating Temperature: 0 °C to 60 °C Storage Temperature: –40 °C to +85 °C Certifications: UL, CSA (pending verification) Functional Features 36 individually accessible screw terminals for secure field connections Extended shroud provides better support for thick AC wiring Designed for high-density I/O modules where panel space is limited Maintains secure clamping in vibration-prone industrial environments Compatible with RX3i and Series 90-30 I/O modules Key Features Extended-depth terminal block for thicker AC wiring and crowded panels 36 screw terminals with 7 lb-in torque for reliable connections Supports #14–26 AWG solid or stranded wire Built-in strip-length guide simplifies installation Durable industrial construction for long-term reliability Fully compatible with high-density PACSystems RX3i and Series 90-30 I/O modules Applications Ideal for high-density control panels, retrofit projects, and new installations in industrial automation systems. Commonly used with AC I/O modules requiring thick wire connections, including motor control, material handling, and process control systems. FAQ Q: Is this terminal block compatible with standard TBB032 modules?A: Yes, it is functionally identical but features an extended shroud for improved wire management. Q: Can it handle stranded wires?A: Yes, it supports both solid and stranded wire types from #14–26 AWG. Q: Does it provide vibration resistance?A: Yes, the screw-type connections ensure reliable clamping in industrial environments. Q: Can it be used with older Series 90-30 modules?A: Yes, it is fully compatible with equivalent high-density Series 90-30 modules.
$200.00 $100.00
-
General Electric GE Fanuc IC695SPF010 RX3i 1000Base-LX SFP Fiber Module
Product Description The IC695SPF010 is a Gigabit SFP transceiver developed for use with GE Fanuc / Emerson PACSystems RX3i communication modules. It enables high-speed Ethernet connectivity over single-mode fiber, supporting long-distance data transmission in electrically noisy or distributed industrial environments. Designed for integration with RX3i PROFINET and fiber scanner modules, this SFP provides reliable 1000Base-LX optical communication with minimal electromagnetic interference. Its hot-swappable design allows installation or replacement without interrupting system operation. Technical Specifications General Information Model: IC695SPF010 Manufacturer: GE Fanuc / Emerson Series: PACSystems RX3i Product Type: SFP Fiber Optic Transceiver Form Factor: Small Form-Factor Pluggable (SFP) Optical & Network Parameters Ethernet standard: 1000Base-LX Transmission speed: 1 Gbps Fiber type: single-mode fiber (SMF) Maximum transmission distance: up to 10 km Optical interface: LX fiber connector Hot-swappable: supported Electrical Characteristics Supply voltage: 3.3 VDC (via host module) Current consumption: approx. 1.2 A (no SFP load reference) up to 1.9 A (dual SFP configuration in host module) 5 VDC requirement (host dependent): up to 1.1 A Design focus: low EMI emission and reduced power consumption Environmental Conditions Operating temperature: 0 °C to 60 °C Storage temperature: –40 °C to +85 °C Compatibility & Integration Compatible with RX3i PROFINET Scanner modules (e.g., IC695PNS001) Supported by RX3i Gigabit Fiber Scanner modules Configuration via Proficy Machine Edition (through host module) Network topologies supported (via host): line, ring, star, daisy-chain Installation & Safety Hot-pluggable for maintenance without system shutdown Designed for installation within enclosed industrial equipment Laser safety: contains invisible optical source; avoid direct exposure ESD precautions required during handling Key Features Gigabit Ethernet over single-mode fiber (1000Base-LX) Supports transmission distances up to 10 km Low electromagnetic interference for industrial environments Hot-swappable SFP design for flexible maintenance Compatible with RX3i fiber and PROFINET communication modules Applications The module is used in industrial Ethernet networks requiring long-distance communication, such as plant-wide networking, remote I/O connections, and infrastructure spanning large facilities or geographically distributed assets. It is particularly suitable for environments with high electrical noise where fiber communication is preferred. FAQ Q: What type of fiber is required?A: Single-mode fiber (SMF) is required for proper operation at full distance capability. Q: Can the module be replaced while the system is running?A: Yes, it supports hot-swapping when installed in a compatible RX3i module. Q: What is the maximum communication distance?A: Up to 10 km under standard 1000Base-LX conditions. Q: Does this module operate independently?A: No, it must be installed in a compatible RX3i communication or scanner module.
$200.00 $100.00
-
General Electric GE Fanuc IC695CPE302 RX3i PLC CPU Module with Ethernet
Product Description The IC695CPE302 is a compact, high-speed CPU module developed for the GE Fanuc / Emerson PACSystems RX3i platform. It delivers reliable control performance for medium to large automation systems, combining fast processing, integrated communications, and flexible protocol support in a single controller. Equipped with a 1.1 GHz processor and built-in networking interfaces, this CPU is designed to handle distributed control architectures, enabling seamless integration with field devices, SCADA systems, and industrial networks. Its support for modern communication standards makes it suitable for both legacy upgrades and new installations. Technical Specifications General Information Model: IC695CPE302 Manufacturer: GE Fanuc / Emerson Series: PACSystems RX3i Product Type: PLC CPU Module Installation: RX3i Universal Backplane Weight: 0.51 kg Processor & Memory CPU speed: 1.1 GHz User memory: 2 MB Memory type: SRAM with non-volatile flash backup Data retention: energy pack (battery-free retention) Communication Interfaces Ethernet: integrated dual-port Gigabit Ethernet switch (10/100/1000 Mbps) Serial port: 1 × RS-232 USB: 1 × USB 2.0 (Type-A) Status indicators: multiple LED diagnostics Supported Protocols SRTP (native GE communication) Modbus TCP/IP and Modbus RTU (slave) OPC UA for secure data exchange PROFINET (via external controller module) Ethernet Global Data (EGD) DNP3 Outstation IEC 61850 client and IEC 60870-5-104 server HART passthrough support System Capacity Discrete I/O: up to 16,000 points Analog I/O: up to 32,000 words Remote I/O devices: up to 255 (with PROFINET controller module) Power Requirements Backplane supply: 5 VDC / 3.3 VDC: approx. 1 A 24 VDC: approx. 0.5 A Environmental Specifications Operating temperature: 0 °C to 60 °C Storage temperature: –40 °C to +85 °C Compliance: UL, cUL, CE, RoHS, FCC, ATEX Zone 2, CCC Marine approvals: ABS, BV, LR, DNV-GL Programming & Engineering Programming languages: Ladder Diagram (LD) Structured Text (ST) Function Block Diagram (FBD) C language support Configuration software: Proficy Machine Edition Features: online editing, tag-based programming, reusable libraries Key Features High-speed 1.1 GHz processor for responsive control Integrated dual-port Gigabit Ethernet Broad industrial protocol compatibility Battery-free memory retention using energy pack Scalable I/O capacity for distributed systems Designed for high availability with redundancy support (MRP) Applications The module is suitable for manufacturing automation, energy systems, water treatment, and process industries requiring reliable control and extensive communication capabilities. It is particularly effective in networked environments with multiple remote I/O stations and SCADA integration. FAQ Q: Does the CPU include built-in Ethernet switching?A: Yes, it features a dual-port Gigabit Ethernet switch for network connectivity and topology flexibility. Q: Can it be used with PROFINET networks?A: Yes, PROFINET is supported when used with a compatible controller module such as PNC001. Q: Is a battery required for memory retention?A: No, it uses an energy pack for non-volatile data retention. Q: What programming environments are supported?A: It supports Ladder Logic, Structured Text, Function Block Diagram, and C programming within Proficy Machine Edition.
$200.00 $100.00
-
General Electric GE Fanuc IC695HSC304 RX3i 4-Channel High-Speed Counter
Product Description The IC695HSC304 is a dedicated high-speed counting module for the GE Fanuc / Emerson PACSystems RX3i platform, developed for precise pulse acquisition and motion-related measurements. Unlike standard I/O modules, it processes high-frequency signals locally, eliminating dependence on PLC scan time and ensuring accurate real-time performance. With support for multiple counting modes and high-frequency inputs, the module is suitable for encoder feedback, flow measurement, and fast event tracking. Integrated outputs and interrupt capabilities allow it to directly control field devices based on counting conditions. Technical Specifications General Information Model: IC695HSC304 Manufacturer: GE Fanuc / Emerson Series: PACSystems RX3i Product Type: High-Speed Counter Module Compatibility: RX3i Universal Backplane Weight: 0.74lbs Counter & I/O Configuration Counters: up to 4 independent counters High-speed inputs: 8 configurable channels High-speed outputs: 7 channels Counter modes supported: A, B, C, D, E, Z, and user-defined Quadrature (A/B) encoder support included Performance Characteristics Maximum count frequency: Up to 1.5 MHz (standard modes) Up to 750 kHz (Type C / custom modes) Internal sampling: 40 MHz (enhanced noise rejection) Response time: ≤ 2 µs Counting range: 32-bit signed integer −2,147,483,648 to +2,147,483,647 Electrical Specifications Input voltage options: 5 VDC range (approx. 4.7–5.5 VDC) 12–24 VDC range (approx. 10–26.4 VDC) Input type: positive logic high-speed signals Output voltage range: 4.7–40 VDC Output protection: electronic short-circuit protection (ESCP) Peak channel current: up to 1.5 A Peak module output current: up to 10.5 A Functional Capabilities Hardware-based pulse processing independent of CPU scan Programmable limit switch (PLS) functionality Configurable input filtering Event-driven interrupts for precise control actions Integrated high-speed output control Diagnostics & Maintenance Module fault monitoring and reporting Terminal block presence detection Firmware upgrade via onboard flash memory Supports hot insertion and removal (RIUP) Power Requirements 3.3 VDC backplane: approx. 457 mA 5 VDC backplane: approx. 64 mA Mechanical & Installation Dimensions: 34 × 145 × 140 mm Mounting: RX3i Universal Backplane Key Features Four independent high-speed counter channels Handles input frequencies up to 1.5 MHz Integrated high-speed inputs and outputs Quadrature encoder and multi-mode counting support Real-time processing without CPU dependency Programmable limit switch functionality Built-in diagnostics and interrupt handling Applications The module is widely used in high-speed automation tasks such as turbine flow measurement, conveyor tracking, packaging machinery, encoder-based positioning, and other motion-related systems requiring fast and accurate pulse counting. FAQ Q: Does the module rely on the PLC scan cycle for counting?A: No, counting is handled by dedicated hardware, ensuring accurate high-speed performance independent of CPU scan time. Q: Can it interface with encoders?A: Yes, it supports quadrature (A/B) encoder inputs for position and speed tracking. Q: What is the maximum input frequency supported?A: Up to 1.5 MHz in standard counting modes. Q: Are outputs protected against faults?A: Yes, outputs include electronic short-circuit protection for safe operation.
$200.00 $100.00
-
General Electric GE Fanuc IC695CPL410 RX3i Rackless CPU Edge Controller
Product Description The IC695CPL410 is a high-performance rackless CPU designed for the GE Fanuc / Emerson PACSystems RX3i platform. It combines deterministic PLC control with embedded edge computing capabilities, allowing industrial users to run real-time automation tasks alongside data processing, analytics, and visualization within a single device. Built around a quad-core AMD processor and supporting both VxWorks and a Linux-based PACEdge environment, this controller is intended for modern distributed architectures where control and data converge. It is suitable for applications requiring high-speed processing, advanced networking, and secure connectivity to enterprise or cloud systems. Technical Specifications General Information Model: IC695CPL410 Manufacturer: GE Fanuc / Emerson Series: PACSystems RX3i Product Type: Rackless CPU / Edge Controller Mounting: DIN rail or panel mount Weight: 0.9 kg Processor & System Architecture CPU: AMD G-Series quad-core processor (approx. 1.2 GHz) Real-time OS: VxWorks Edge environment: Linux-based PACEdge platform Supports concurrent execution of control logic and edge applications Memory & Storage User memory: 64 MB Program block capacity: up to 768 blocks Maximum block size: 128 KB Removable Data Storage Device (RDSD): supported Internal storage for logs, web HMI, and analytics applications Communication Interfaces Ethernet ports: multiple Gigabit Ethernet interfaces (front-access) Ethernet LANs: supports up to 4 independent networks Serial interface: 1 × RJ45 (RS-232 compatible) USB: 2 × USB 3.0 host ports Video output: DisplayPort (for local visualization) Supported Protocols PROFINET IO (controller/device functionality) OPC UA for secure data exchange Modbus TCP/IP Web-based HMI via PACEdge Control Performance & Capacity Discrete I/O capacity: up to 32,000 points Analog capacity: up to 32,000 words Execution speed: up to 0.15 µs per instruction System scan rates: as low as 3 ms depending on configuration Power Requirements Input voltage: 18–30 VDC Power consumption: up to 20 W Environmental Specifications Operating temperature: –40 °C to +70 °C Storage temperature: –40 °C to +85 °C Humidity: 5–95% non-condensing Optional conformal coating for harsh environments Marine certifications available (ABS, DNV-GL, BV, LR) Security Features Secure boot mechanism Trusted Platform Module (TPM) hardware Encrypted communications and authentication Protection against unauthorized firmware and network-based threats Redundancy & Availability Supports hot-standby CPU redundancy Switchover time: as fast as 300 ms PROFINET system redundancy support Key Features Integrated PLC control and edge computing platform Quad-core processor for high-speed execution Multiple Gigabit Ethernet interfaces for network segmentation Built-in industrial protocols including OPC UA and PROFINET Advanced cybersecurity with TPM and secure boot Wide temperature operation for demanding environments Applications The controller is suited for distributed control systems, smart manufacturing, energy management, and IIoT deployments. It is particularly effective in architectures requiring local data processing, edge analytics, and seamless integration with SCADA or cloud platforms. FAQ Q: Does this CPU require a traditional rack?A: No, it is a rackless design and can be mounted directly on a panel or DIN rail. Q: Can control and edge applications run simultaneously?A: Yes, real-time control runs on VxWorks while Linux-based PACEdge handles data processing and applications. Q: What redundancy options are available?A: The module supports hot-standby redundancy with fast switchover, as well as PROFINET system redundancy. Q: Is it suitable for harsh environments?A: Yes, it operates from –40 °C to +70 °C and offers optional conformal coating and marine certifications.
$200.00 $100.00
-
General Electric GE Fanuc IC695ALG508 RX3i 8-Channel RTD Input Module
Product Description The IC695ALG508 is a high-precision temperature and resistance input module developed for the GE Fanuc / Emerson PACSystems RX3i platform. It provides eight isolated differential input channels, each configurable for RTD sensing or direct resistance measurement. Designed for process environments requiring accurate thermal monitoring, the module supports multiple RTD standards and wiring configurations, including 2-wire, 3-wire, and 4-wire connections. A Sigma-Delta conversion architecture ensures stable and precise readings, while advanced diagnostics enhance system reliability and fault visibility. This module is typically deployed in applications where measurement accuracy, noise immunity, and flexible configuration are critical. Technical Specifications General Information Model: IC695ALG508 Manufacturer: GE Fanuc / Emerson Series: PACSystems RX3i Product Type: RTD / Resistance Input Module Channels: 8 isolated differential inputs Mounting: RX3i Universal Backplane Weight: 0.51 lbs Input Configuration RTD wiring: 2-wire, 3-wire, 4-wire selectable per channel Resistance ranges: 0–250 Ω 0–500 Ω 0–1000 Ω 0–2000 Ω 0–3000 Ω 0–4000 Ω Supported RTD Types Platinum (Pt 385, Pt 391.6): 50 / 100 / 200 / 500 / 1000 Ω Nickel (Ni 618, Ni 672): 100 / 200 / 500 / 1000 Ω, 120 Ω Nickel-Iron (NiFe 518): 604 Ω Copper (Cu 426): 10 / 50 / 100 Ω Performance Characteristics Conversion method: Sigma-Delta A/D Data format: 32-bit floating point 16-bit integer (stored in 32-bit field) Typical accuracy: better than ±0.1% of span at 25°C Input impedance: ~1 MΩ Notch filter: configurable from 2.3 Hz to 28 Hz Update time: ~10 ms per channel (high-speed filter) up to ~127 ms per channel (low-frequency filtering) Diagnostics & Monitoring Open-circuit (broken wire) detection Short-circuit detection High/low and high-high/low-low alarm thresholds Rate-of-change alarm (positive and negative) Internal diagnostics: watchdog, RAM and flash integrity checks Terminal block presence detection Isolation Channel grouping: 2 groups of 4 channels Field-to-backplane isolation: 250 VAC continuous 1500 VAC for 1 minute 2550 VDC for 1 second Power Requirements 3.3 VDC: approx. 400 mA 5 VDC: approx. 200 mA Maximum power dissipation: ~2.5 W Environmental Conditions Operating temperature: 0 °C to 60 °C Storage temperature: –40 °C to +85 °C Humidity: 5–95% non-condensing Mechanical & Installation Dimensions: 34 × 145 × 140 mm Terminal blocks required: IC694TBB032 or IC694TBS032 Supports hot insertion and removal (RIUP capability) Key Features Eight isolated RTD/resistance input channels Flexible wiring support (2, 3, or 4 wires per channel) High-resolution Sigma-Delta conversion for stable measurements Programmable digital filtering for noise rejection Comprehensive diagnostic and alarm functions Supports ITS-90 linearization standards Hot-swappable within RX3i systems Applications This module is typically used in temperature monitoring systems across process industries, including chemical plants, power generation, and manufacturing lines. It is suitable for applications requiring precise RTD measurement, such as reactor temperature control, heat exchanger monitoring, and environmental sensing. FAQ Q: Can different RTD types be used on each channel?A: Yes, each channel is independently configurable, allowing mixed RTD types and resistance inputs within the same module. Q: Does the module support live replacement?A: Yes, it supports removal and insertion under power (RIUP) when used in a compatible RX3i system. Q: What filtering options are available?A: A programmable notch filter from 2.3 Hz to 28 Hz is available to suppress electrical noise. Q: Is external signal conditioning required?A: No, the module includes built-in linearization and signal processing for RTD inputs.
$200.00 $100.00
-
General Electric GE Fanuc IC694MDL741 RX3i Discrete Output Module
Product Description The IC694MDL741 discrete output module is part of the GE Fanuc / Emerson PACSystems RX3i family, designed to deliver reliable DC switching for industrial control systems. It provides 16 positive-logic outputs organized into two electrically isolated groups, allowing flexible wiring and load distribution across field devices. Each output channel is capable of driving standard 12 VDC or 24 VDC loads, making the module suitable for actuating relays, solenoids, indicator lamps, and other DC-powered equipment. Optical isolation and fast switching performance ensure dependable operation in electrically noisy environments. Technical Specifications General Information Model: IC694MDL741 Manufacturer: GE Fanuc / Emerson Series: PACSystems RX3i Product Type: Discrete Output Module Outputs: 16 channels (2 groups of 8) Logic Type: Positive logic (sourcing outputs) Installation: RX3i Universal Backplane Weight: 0.26 lbs Output Characteristics Rated voltage: 12/24 VDC Operating range: 12–24 VDC (+20%, −15%) Output current: 0.5 A per channel Maximum group current: 2 A per group Voltage drop (ON state): ≤ 0.5 V Leakage current (OFF state): ≤ 1 mA Response time: ≤ 2 ms (ON and OFF) Isolation Field-to-backplane isolation: 250 VAC continuous, 1500 VAC for 1 minute Group-to-group isolation: electrically separated output groups Optical isolation for improved noise immunity Power Requirements Backplane supply: 5 VDC at 110 mA (all outputs active) Environmental Conditions Operating temperature: 0 °C to 60 °C Storage temperature: –40 °C to +85 °C Humidity: 5–95% non-condensing Mechanical & Indicators Dimensions: approx. 34 × 145 × 140 mm Status indication: 16 individual LEDs for output states Key Features 16 DC outputs with positive logic control Two isolated groups for flexible wiring schemes Fast switching response for time-sensitive applications Optical isolation for enhanced electrical noise protection Per-channel LED indicators for quick diagnostics Applications The module is commonly used in automation systems for switching DC loads such as solenoid valves, interposing relays, pilot lights, and compact actuators. Its grouped isolation design supports segmented control circuits within the same module. FAQ Q: Are the outputs sourcing or sinking?A: The module uses positive logic, meaning it provides sourcing outputs. Q: What is the maximum load current per channel?A: Each output can supply up to 0.5 A, with a maximum of 2 A per group. Q: Can different voltage levels be used across groups?A: Yes, the two groups are electrically isolated, allowing independent wiring configurations. Q: How fast are the outputs?A: The module supports switching times of 2 ms or less for both ON and OFF transitions.
$200.00 $100.00
-
General Electric GE Fanuc IC694MDL250 RX3i 16-Point 120VAC Input Module
Product Description The IC694MDL250 from GE Fanuc / Emerson is a 16-channel AC discrete input module engineered for PACSystems RX3i control systems. It is designed to interface directly with 120 VAC field signals, providing reliable detection of on/off states in industrial environments. Each input channel is electrically isolated, allowing flexible wiring across multiple AC phases or independent sources. Integrated noise suppression circuitry improves signal stability, while software-defined filtering enables precise adjustment of input response times without hardware intervention. This module is well suited for applications where dependable AC signal monitoring and noise immunity are critical. Technical Specifications General Information Model: IC694MDL250 Manufacturer: GE Fanuc / Emerson Series: PACSystems RX3i Product Type: Discrete Input Module Number of Inputs: 16 individually isolated points Installation: RX3i I/O slot Weight: 0.5 lbs Input Characteristics Nominal voltage: 120 VAC Operating range: 0–132 VAC, 47–63 Hz Input current: approx. 7 mA per channel ON state voltage: 70–132 VAC OFF state voltage: 0–20 VAC ON state current: ≥5–6 mA OFF state current: ≤2.5 mA Filtering & Signal Conditioning Software-configurable input filter Adjustable from 20 ms to 2540 ms No physical switches required; parameters set via CPU Isolation Channel-to-backplane: 250 VAC continuous, 1500 VAC for 1 minute Channel-to-channel: fully isolated inputs Supports independent field wiring and multi-phase systems Power Requirements Backplane consumption: approx. 220 mA @ 5 VDC (all inputs active) Environmental Conditions Operating temperature: 0 °C to 60 °C Storage temperature: –40 °C to +85 °C Humidity: 5–95% non-condensing Mechanical & Installation Compatible terminal blocks: IC694TBB032 / IC694TBB132 IC694TBS032 / IC694TBS132 Status indication: 16 input LEDs (one per channel) Terminal block presence indicator Key Features 16 isolated AC input channels for flexible field wiring Designed for 120 VAC signal detection Built-in RC filtering for electrical noise reduction Adjustable software filtering for precise signal handling Individual LED indicators for diagnostics Terminal block detection for system integrity Applications Used in industrial control systems where AC signal monitoring is required, such as detecting contact closures, relay states, or field device status in manufacturing lines, utilities, and process plants. FAQ Q: Can inputs be connected to different AC phases?A: Yes, each channel is individually isolated, allowing connection to separate AC sources or phases. Q: How is input filtering configured?A: Filtering is adjusted through the PLC program, with selectable times from 20 ms to 2540 ms. Q: Does the module include noise suppression?A: Yes, internal RC snubber circuits help reduce electrical noise and transient interference. Q: What firmware is required for operation?A: RX3i CPU firmware version 3.50 or later is required.
$200.00 $100.00
-
General Electric GE Fanuc IC695ALG708 RX3i 8-Channel Analog Output Module
Product Description The IC695ALG708 analog output module is designed for the GE Fanuc / Emerson PACSystems RX3i platform, providing eight non-isolated output channels for precise control of field devices. Each channel can be configured independently via software to deliver either voltage or current signals, eliminating the need for hardware jumpers and simplifying commissioning. Built for demanding control environments, the module supports standard industrial output ranges and delivers consistent performance with fast update cycles and integrated diagnostics. It requires an external 24 VDC supply for field-side operation and installs directly into the RX3i Universal Backplane. Technical Specifications General Information Model: IC695ALG708 Manufacturer: GE Fanuc / Emerson Series: PACSystems RX3i Module Type: Non-isolated Analog Output Number of Channels: 8 configurable outputs Installation: RX3i Universal Backplane Weight: 0.43 kg Output Configuration Per-channel selectable signal type Current outputs: 0–20 mA, 4–20 mA Voltage outputs: 0–10 V, ±10 V Performance Characteristics Update time: approximately 8 ms (all channels) Resolution: up to 16-bit (range dependent) Accuracy: typically ±0.15% FS at 25°C, up to ±0.25% over temperature Output settling time: ~2 ms to 95% Data format: 32-bit IEEE floating point or 16-bit integer Load Requirements Current mode load: up to 850 Ω (at 20 V supply) Voltage mode load: minimum 2 kΩ Power Requirements Backplane supply: 3.3 VDC at 375 mA (typical) External supply: 19.2–30 VDC (24 V nominal) External current draw: approx. 315 mA Maximum power dissipation: 7.25 W Isolation & Protection Non-isolated channel design (common reference) Transient protection suitable for standard industrial environments Environmental Conditions Operating temperature: 0 °C to 60 °C Humidity: 5–95% non-condensing Mechanical & Wiring Dimensions: 34 × 145 × 140 mm Compatible terminal blocks: IC694TBB032, IC694TBS032 (and extended variants) Functional Features Independent channel configuration for mixed signal types Built-in alarm handling (high, low, high-high, low-low) Output limiting, bias adjustment, and ramp-rate control Automatic calibration and internal diagnostics Configurable fault behavior: hold last value or predefined safe output Applications This module is suited for applications requiring precise analog output control, including process regulation, motion control systems, dosing systems, and instrumentation interfaces. Its flexibility makes it suitable for both retrofit and new system designs within RX3i architectures. FAQ Q: Can voltage and current outputs be used simultaneously?A: Yes, each channel is independently configurable, allowing mixed signal types within the same module. Q: Does the module require an external power supply?A: Yes, a 24 VDC external supply must be connected at the terminal block for output operation. Q: Is the module isolated?A: No, this is a non-isolated module, so proper grounding and signal reference design are important. Q: What happens to outputs during a fault condition?A: The module can be configured to either maintain the last output value or transition to a predefined safe state.
$200.00 $100.00
-
General Electric GE Fanuc IC695ALG608 RX3i 24-Bit Analog Input Module
Product Description The IC695ALG608 from GE Fanuc / Emerson is a high-resolution analog input module developed for the PACSystems RX3i platform. It supports both single-ended and differential signal acquisition, offering flexibility for a wide range of industrial measurement tasks. Designed with a 24-bit sigma-delta ADC, this module delivers precise and stable data acquisition, even in electrically noisy environments. All channels are software-configurable, allowing users to select voltage or current inputs, filtering options, and data formats without hardware changes. Unlike isolated modules, this unit uses a non-isolated architecture, making it suitable for applications where signal references are common and high channel density is required. Technical Specifications General Information Model: IC695ALG608 Manufacturer: GE Fanuc / Emerson Series: PACSystems RX3i Module Type: Non-isolated Analog Input Channel Configuration: 8 single-ended inputs 4 differential inputs Installation: RX3i universal backplane Weight: 0.65 lbs Supported Input Ranges Current: 0–20 mA, 4–20 mA, ±20 mA Voltage: ±10 V, 0–10 V, ±5 V, 0–5 V, 1–5 V Low-level voltage ranges: ±50 mV, ±150 mV Conversion & Performance ADC Type: 24-bit Σ-Δ converter Data formats: 32-bit IEEE floating point or 16-bit integer (packed in 32-bit field) Accuracy: ±0.05% full scale (typical, 13–33 °C) Input impedance (voltage): >100 kΩ Current input resistance: 249 Ω ±1% Filtering & Signal Processing Selectable digital filters: 8, 12, 16, 40, 200, 500 Hz Automatic calibration at startup Open-circuit detection (voltage and 4–20 mA) Alarm functions: high/low limits and rate-of-change Protection & Isolation Overvoltage protection: ±60 VDC continuous Overcurrent protection: ±28 mA continuous Note: Channel-to-backplane isolation is not provided (non-isolated design) Power Requirements Backplane supply: 5 VDC: 330 mA max 3.3 VDC: 600 mA max Power dissipation: up to 4.83 W Environmental Conditions Operating temperature: 0 °C to 60 °C (typical RX3i rating) Storage temperature: –40 °C to +85 °C Humidity: 5–95% non-condensing Mechanical & Wiring Dimensions: 102 × 119 × 45 mm Compatible terminal blocks: IC694TBB032 / TBB132 (box-style) IC694TBS032 / TBS132 (spring-style) Key Features Flexible channel configuration: single-ended or differential Wide support for industrial voltage and current signals 24-bit high-resolution conversion for precise measurements Software-defined filtering and scaling Built-in diagnostics and alarm capabilities Hot-swap capable in RX3i systems Applications Suitable for high-accuracy signal acquisition in process industries, energy systems, OEM machinery, and test environments. Particularly effective in applications requiring stable measurement of low-level analog signals. FAQ Q: Does this module provide channel isolation?A: No, it is a non-isolated module. All inputs share a common reference, so proper grounding design is required. Q: Can I mix voltage and current inputs on different channels?A: Yes, each channel can be configured independently via software. Q: What data formats are supported?A: The module supports both 32-bit floating point and 16-bit integer formats. Q: Is it suitable for low-level signal measurement?A: Yes, it supports ranges as low as ±50 mV with high resolution.
$200.00 $100.00
-
General Electric GE Fanuc IC694MDL916 RX3i 16-Point Isolated Relay Output Module
Product Description The IC694MDL916 (GE Fanuc RX3i) is a high-density 16-point relay output module designed for the PACSystems RX3i platform. Each output is individually isolated, normally open (Form A), and capable of switching both AC and DC loads. This makes it ideal for controlling solenoids, lamps, small motors, contactors, and other general-purpose industrial devices. With strong electrical isolation and low susceptibility to field-side transients, the module ensures reliable operation in harsh industrial environments. It integrates seamlessly with RX3i backplanes and supports high-speed serial bus communication for precise control applications. Technical Specifications General Information Model: IC694MDL916 Manufacturer: GE Fanuc / Emerson Product Type: Relay Output Module Platform: RX3i PACSystems Channels: 16 isolated Form A (Normally Open) outputs Mounting: Any RX3i I/O slot Weight: 0.31 kg Electrical Characteristics AC Switching Voltage: 5–250 VAC, 47–63 Hz DC Switching Voltage: 0–125 VDC (nominal 5/24/125 VDC) Maximum Current per Contact: 4 A resistive load Minimum Load Current: 10 mA per point Switching Rate: 20 cycles per minute max Response Time: ~10 ms Isolation & Protection Field-to-Backplane: 1500 VAC for 1 minute Point-to-Point Isolation: Yes, each relay isolated Relay contact life: 200,000 – 1,000,000 operations Power Requirements Backplane current draw (5 VDC): 300 mA max (all outputs ON) Relay power (24 VDC): 150 mA max (all outputs ON) Environmental Ratings Operating Temperature: –20 °C to +60 °C Humidity: 5–95 % RH, non-condensing Mechanical Terminal Block Options: Box-style (IC694TBB032), Extended Box-style (IC694TBB132), Spring-style (IC694TBS032), Extended Spring-style (IC694TBS132) External Supply Voltage: 5–250 VAC / 0–125 VDC Key Features 16 individually isolated relay outputs for high reliability Supports AC and DC loads, including resistive, lamp, and pilot-duty applications High noise immunity for industrial environments Compatible with Proficy Machine Edition configuration software Suitable for solenoids, contactors, motors, lamps, and general control devices Applications This module is commonly used in factory automation, process control, and machinery operations requiring multiple isolated relay outputs. It is optimized for high-reliability switching of low- to medium-power devices. FAQ Q: Are the relay outputs isolated?A: Yes, each of the 16 channels is individually isolated to prevent cross-talk and protect field devices. Q: What types of loads can it handle?A: It can switch AC and DC loads, including resistive, lamp, and pilot-duty circuits. Q: What is the maximum switching current per relay?A: Up to 4 A resistive load per contact. Q: Which software is required for configuration?A: Proficy Machine Edition version 5.5 or later, including Service Pack 2.
$200.00 $100.00
-
General Electric GE Fanuc IC694ALG392 8-Channel Analog Output Module RX3i
Product Description The IC694ALG392 (GE Fanuc RX3i) is an 8-channel analog output module designed for precise process control in PACSystems environments. It converts digital signals from the CPU into high-accuracy voltage or current outputs, enabling reliable control of valves, motors, drives, and other field devices. This module allows independent configuration of each channel for voltage or current output, offering high-resolution conversion and rapid update rates. Advanced diagnostics, including open-wire detection in current mode, help maintain system reliability. The module is compatible with both RX3i and Series 90‑30 PLC systems, supporting flexible integration in modern industrial applications. Technical Specifications General Information Model: IC694ALG392 Manufacturer: GE Fanuc / Emerson Product Type: Analog Output Module System Compatibility: RX3i PACSystems, Series 90‑30 Channels: 8 single-ended outputs Mounting: RX3i or Series 90‑30 rack slots Output Options Voltage: 0–10 V (unipolar), –10–+10 V (bipolar) Current: 0–20 mA, 4–20 mA Channels configurable independently Resolution & Accuracy 0–20 mA: 0.625 µA per LSB 4–20 mA: 0.5 µA per LSB Voltage: 0.3125 mV per LSB Accuracy: Current: ±0.1% typical, ±0.25% max @ 25 °C Voltage: ±0.25% typical, ±0.5% max @ 25 °C Performance Update rate: ~8 ms for all channels Diagnostics: Open-wire detection (current mode), Module OK/User Power LEDs Electrical Requirements External supply: 24 VDC (20–30 VDC range) Current draw: 110 mA @ 5 VDC, 315 mA @ 24 VDC Compliance voltage (current mode): Vuser – 3 V Load: 0–850 Ω (20 V), up to 1350 Ω (30 V) Environmental & Physical Operating temp: 0–60 °C Humidity: 5–95% non-condensing Isolation: Channels isolated from user supply; field to backplane 250 VAC continuous, 1500 VDC for 1 min Weight: 0.31 kg Applications Ideal for industrial automation tasks requiring precise analog control, such as regulating process valves, motor speed control, piston actuators, and other field devices requiring voltage or current inputs. Compatible with RX3i and Series 90‑30 PLCs. FAQ Q: Can each channel be configured independently?A: Yes, all 8 channels can be set separately for voltage or current output. Q: What is the update rate of this module?A: All channels are refreshed approximately every 8 ms, depending on CPU scan and application load. Q: Is open-wire detection supported?A: Yes, current-mode channels include open-wire detection for enhanced safety. Q: Can it be used with Series 90‑30 PLCs?A: Yes, the module is fully compatible with RX3i and Series 90‑30 systems.
$200.00 $100.00
-
General Electric GE IC695CHS007 RX3i 7-Slot Rack/Baseplate Module
Product Description The GE IC695CHS007 is a 7-slot rack/baseplate engineered for PACSystems RX3i PLCs. It provides the structural and electrical framework for installing CPUs, power supplies, and I/O modules, ensuring reliable backplane communication and stable power distribution across the system. The rack supports a high-speed RX3i backplane bus and is compatible with both RX3i and Series 90-30 I/O modules, offering a versatile solution for mid-sized control systems. Designed for industrial use, it delivers durability, compactness, and ease of integration into cabinets or enclosures. Key Features Seven-slot configuration: dedicated slots for power supply and CPU, plus up to six I/O or option modules. High-speed RX3i backplane bus enables efficient communication and data transfer between modules. Supports RX3i CPUs, power supplies, discrete/analog I/O, and communication modules. Compact design for mid-sized control panels while maintaining accessibility. Industrial-grade construction for continuous operation in harsh environments. Horizontal orientation with internal grounding bar and included grounding terminal. Supports module hot-swap for uninterrupted maintenance. Technical Specifications Parameter Specification Manufacturer GE Fanuc / Emerson Part Number IC695CHS007 Product Type 7-Slot Rack/Baseplate Module Slots 7 (Slot 0: power supply, Slot 1: CPU, Slots 2–6: I/O/option) Supported Modules RX3i CPUs, power supplies, discrete/analog I/O, Series 90-30 option modules Backplane Type High-speed RX3i bus Mounting Style Rack/baseplate mounting, horizontal orientation Dimensions 12 × 7 × 2 in (305 × 178 × 51 mm) Weight 1.2 kg Operating Temperature 0–60 °C Storage Temperature -40–85 °C Humidity Range 5–95% RH, non-condensing Enclosure Compatibility NEMA/UL Type 1 (IP20) Wire Size Recommended 14–22 AWG Terminal Input TB1: Isolated +24VDC, Terminal 8: Isolated ground Backplane Orientation Horizontal Module Hot-Swap Support Yes Internal Power Requirements 600 mA @ 3.3 VDC, 240 mA @ 5 VDC Maximum Clearance for Installation 102 mm (4 in.) on all sides Applications Hosting and interconnecting RX3i CPUs, power supplies, and I/O modules in mid-sized automation systems. Process control, energy management, and transportation system control panels. Integration with Series 90-30 option and I/O modules for legacy system upgrades. FAQ Q: How many I/O modules can the IC695CHS007 support?A: Up to six I/O or option modules in addition to the CPU and power supply. Q: Is it compatible with Series 90-30 modules?A: Yes, it supports RX3i modules and Series 90-30 I/O and option modules. Q: Can this rack/baseplate handle hot-swappable modules?A: Yes, module hot-swap is fully supported. Q: What is the recommended wire gauge for installation?A: 14–22 AWG solid or stranded wires are recommended for backplane terminal connections.
$200.00 $100.00
-
General Electric GE IC694TBB032 RX3i High-Density Terminal Block Module
Product Description The GE IC694TBB032 is a high-density terminal block designed for PACSystems RX3i PLCs, providing a secure and organized wiring interface for connecting field devices to discrete and analog I/O modules. With 32 screw-type terminals, it ensures reliable signal termination while supporting compact panel or DIN-rail mounting. This terminal block is compatible with high-density RX3i I/O modules such as IC694MDL753 and IC694MDL754, offering flexible integration into complex control systems. Industrial-grade construction guarantees durability in demanding environments. Key Features 32 screw-type terminals for secure and reliable field wiring. Compatible with high-density RX3i discrete and analog I/O modules. Compact box-style design for efficient panel space utilization. Screw clamp connections prevent loose wiring and ensure long-term reliability. Supports #14–26 AWG solid or stranded wires with recommended 7 lb-in torque. Can be mounted on panels or DIN rails for flexible installation. Designed for industrial environments with 0–60 °C operating temperature range. Technical Specifications Parameter Specification Manufacturer GE Fanuc / Emerson Part Number IC694TBB032 Product Type High-Density Terminal Block Module Terminal Points 32 screw-type terminals Connection Type Screw clamp Supported Modules RX3i high-density I/O modules (e.g., IC694MDL753, IC694MDL754) Wire Gauge Supported #14–26 AWG (solid or stranded) Wire Strip Length 0.310 in (7.87 mm) Tightening Torque 7 lb-in Mounting Style Panel or DIN-rail mount Dimensions 100 × 70 × 30 mm Weight 0.31 lbs Operating Temperature 0–60 °C Storage Temperature -40–85 °C Humidity Range 5–95% RH, non-condensing Applications Connecting field devices to high-density discrete or analog I/O modules. Manufacturing process control and monitoring systems. Energy and utility control panels requiring compact, reliable wiring solutions. Transportation and infrastructure automation systems. FAQ Q: Can this terminal block handle both solid and stranded wires?A: Yes, it supports #14–26 AWG solid or stranded wires. Q: Is it compatible with all RX3i I/O modules?A: It is compatible with high-density RX3i modules such as IC694MDL753 and IC694MDL754. Q: How should the screw terminals be maintained?A: Periodic tightening is recommended to prevent signal loss over time. Q: What mounting options are available?A: The IC694TBB032 can be mounted on panels or DIN rails for flexible installation.
$200.00 $100.00
-
General Electric GE IC695ALG728 RX3i 8-Channel Non-Isolated Analog Output Module
Product Description The GE IC695ALG728 is an 8-channel analog output module for PACSystems RX3i PLCs, designed for precise process control and monitoring. Featuring HART-enabled diagnostics, this module provides advanced communication with field devices while delivering high-resolution analog outputs. Its non-isolated design supports multiple output ranges, including 4–20 mA and ±10 VDC, with fast update rates and high accuracy, making it ideal for critical industrial applications. The compact form factor saves rack space, and the robust industrial-grade construction ensures reliable operation in demanding environments. Key Features Eight analog output channels supporting flexible voltage and current ranges. HART-enabled diagnostics for enhanced field device communication and monitoring. High-resolution outputs (16-bit) with ±0.15% full-scale accuracy at 25°C. Fast analog update rate (~8 ms across all channels) for responsive control. Non-isolated design with clear grounding guidelines to prevent signal interference. Compact RX3i-compatible form factor for efficient rack integration. Industrial-grade reliability for continuous operation in harsh environments. Technical Specifications Parameter Specification Manufacturer GE Fanuc / Emerson Part Number IC695ALG728 Product Type 8-Channel Non-Isolated Analog Output Module Channels 8 analog outputs Output Type Current (0–20 mA, 4–20 mA), Voltage (0–10 V, ±10 V) Resolution 16-bit Accuracy ±0.15% full scale at 25°C; ±0.30% at 60°C Update Rate 8 ms (all channels) HART Protocol Version 5.0 supported Isolation Non-isolated Maximum Output Load 850 Ω (current outputs) Output Voltage Protection -30 V for 60 s, +30 V for 1 hr (current output only) Backplane Power Requirement 380 mA at 3.3 VDC (HART enabled) External Power Supply Voltage Range 19.2–30 VDC Power Consumption 7.25 W max Dimensions 142 × 100 × 34 mm Weight 0.22 kg Operating Temperature 0–60 °C Storage Temperature -40–85 °C Humidity Range 5–95% RH, non-condensing Applications Precision process control in chemical, petrochemical, and energy industries. Oil & gas production and refinery systems. Power generation and utility monitoring. Industrial manufacturing requiring high-resolution analog control. Integration with HART-enabled field devices for diagnostic feedback. FAQ Q: Can this module handle both current and voltage outputs?A: Yes, the IC695ALG728 supports 0–20 mA, 4–20 mA, 0–10 V, and ±10 V output ranges. Q: Does it support HART communication?A: Yes, it includes HART-enabled diagnostics, supporting version 5.0 protocol. Q: What is the analog update rate?A: The module updates all eight channels approximately every 8 milliseconds. Q: Is the module isolated?A: No, it is non-isolated. Proper grounding is recommended to prevent interference.
$200.00 $100.00
-
General Electric GE IC698CHS009 RX7i 9-Slot Rear-Mount Chassis | PACSystems
Product Description The GE IC698CHS009 is a 9-slot rear-mount rack chassis designed for PACSystems RX7i PLCs, providing the structural and electrical framework to support CPUs, power supplies, and I/O modules. The chassis accommodates both single-width and double-width modules, with a high-speed backplane bus enabling reliable communication across all installed modules. Its robust design ensures durability in industrial environments while maintaining a compact footprint for efficient control cabinet installation. Dedicated slots for CPU and power modules guarantee proper system architecture, and flexible configuration allows mixed module setups for scalable automation systems. Key Features Rear-mount form factor for efficient use of control cabinet space. Supports single and double-width modules for flexible system expansion. Dedicated slots for power supply and CPU modules ensure organized architecture. High-speed backplane communication for reliable signal transfer between modules. Industrial-grade construction designed for harsh environments. Compatible with RX7i CPUs, IC698CRE CPU modules, and Series 90-70 I/O modules. Scalable configuration options for mixed single/double-width module layouts. Technical Specifications Parameter Specification Manufacturer GE Fanuc / Emerson Part Number IC698CHS009 Product Type 9-Slot Rear-Mount Rack Chassis Total Slots 9 (Slot 0: power supply, Slot 1: CPU, Slots 2–8: I/O) Supported Modules RX7i CPUs (IC698CPE010/020, IC698CRE020), Series 90-70 I/O, VME modules Module Widths Supported Single-width (1 slot), double-width (2 slots) Backplane Spacing 0.8 in (20.3 mm) center-to-center Module Configuration Up to 7 single-width, 4 double-width, or mixed Dimensions (H × W × D) 178 × 101 × 76 mm Weight 1.27 kg Operating Temperature 0–60 °C Storage Temperature -40–85 °C Humidity Range 5–95% RH, non-condensing Applications Industrial process control and automation systems. Manufacturing and production line PLC integration. Energy, transportation, and power distribution systems. Scalable RX7i rack configurations requiring mixed I/O and CPU modules. FAQ Q: Can this chassis support both single and double-width modules?A: Yes, the chassis supports both, allowing flexible configuration for mixed module layouts. Q: Which CPUs are compatible with IC698CHS009?A: It supports RX7i CPUs including IC698CPE010, IC698CPE020, and IC698CRE020. Q: Is this chassis suitable for Series 90-70 I/O modules?A: Yes, it is compatible with Series 90-70 I/O and VME modules. Q: What is the backplane spacing for module installation?A: Modules are spaced at 0.8 in (20.3 mm) center-to-center on the backplane.
$200.00 $100.00
-
General Electric GE IC695SPF002 RX3i SFP Scanner Module | PACSystems
Product Description The GE IC695SPF002 is a compact Small Form-Factor Pluggable (SFP) scanner module engineered for PACSystems RX3i PLCs. It provides high-speed communication for distributed I/O systems using fiber-optic and Ethernet connections. Designed for both local and remote I/O networks, the module supports multi-mode fiber transmission up to 2 km, dual RJ-45 ports, and dual SFP slots for flexible deployment. SD card support allows configuration storage and data logging, while LED indicators provide clear operational status. Its compact footprint enables convenient installation in RX3i racks, supporting robust networking in complex industrial environments. Key Features High-speed 100 Mbps data communication for remote I/O connectivity. Multi-mode fiber support with transmission distances up to 2 km. Dual RJ-45 ports and SFP cages for versatile networking options. LED indicators for operational and activity monitoring. SD card slot for configuration storage and system data backup. Compact design fits easily into RX3i rack-mounted PLC systems. Technical Specifications Parameter Specification Manufacturer GE Fanuc / Emerson Part Number IC695SPF002 Product Type RX3i SFP Scanner Module Communication Speed 100 Mbps Media Type Multi-Mode Fiber (MMF) Maximum Transmission Distance 2 km Connectors 2 × RJ-45 ports, 2 × SFP cages SD Card Support Yes LED Indicators Status and activity Operating Voltage 3.3–5 VDC Operating Temperature 0–60 °C Dimensions 180 × 165 × 215 mm Weight 0.06 kg Applications Remote I/O expansion for RX3i PLCs. Industrial networks requiring fiber-optic connectivity. Oil & gas, power generation, and renewable energy plants. Food & beverage processing and manufacturing facilities. Distributed control systems with high-speed communication needs. FAQ Q: What type of fiber does IC695SPF002 support?A: It supports multi-mode fiber (MMF) for distances up to 2 km. Q: How many network ports does the module provide?A: It includes two RJ-45 Ethernet ports and two SFP cages for fiber-optic modules. Q: Can I store configuration data on this module?A: Yes, it has an SD card slot for configuration and data storage. Q: Is the module compatible with all RX3i PLCs?A: It is designed specifically for PACSystems RX3i PLCs and compatible modules.
$200.00 $100.00
-
General Electric GE IC694PWR331 Power Supply Module | PACSystems RX3i
Product Description The GE IC694PWR331 is a high-capacity power supply module designed for PACSystems RX3i PLC racks. It delivers regulated DC power to the CPU and I/O modules, ensuring stable operation in demanding industrial environments. Equipped with multiple output voltages (+5 V, +12 V, -12 V) and auto-sensing AC input, this module supports both local and remote RX3i bases. Its built-in isolation and protection mechanisms guarantee reliable performance even under fluctuating power conditions. Key Features Regulated outputs provide consistent power to RX3i CPU and I/O modules. Auto-sensing AC input (120/240 VAC, 47–63 Hz) for global compatibility. Multiple DC outputs: +5 VDC (30 A), +12 VDC (3 A), -12 VDC (1 A). Input-to-output isolation ensures safe operation across modules. Compatible with standard and remote RX3i rack/base configurations. Industrial-grade design suitable for continuous operation in harsh environments. Technical Specifications Parameter Specification Manufacturer GE Fanuc / Emerson Part Number IC694PWR331 Product Type Power Supply Module PLC Compatibility PACSystems RX3i Input Voltage 120/240 VAC auto-sensing Input Frequency 47–63 Hz Output Voltage +5 VDC, +12 VDC, -12 VDC Output Current Capacity +5 VDC @ 30 A, +12 VDC @ 3 A, -12 VDC @ 1 A Total Power Capacity ~150 W Mounting RX3i rack/baseplate Isolation Input-to-output isolation Operating Temperature 0–60 °C Storage Temperature -40–85 °C Humidity Range 5–95% RH, non-condensing Dimensions Standard RX3i rack size Weight 1.2 kg Applications Manufacturing automation systems requiring stable DC power. Process control and energy management PLC networks. Transportation, material handling, and industrial machinery. Large multi-rack RX3i PLC installations needing high-capacity power supply. FAQ Q: What output voltages does IC694PWR331 provide?A: It supplies +5 VDC, +12 VDC, and -12 VDC to CPU and I/O modules. Q: Can this module handle remote RX3i bases?A: Yes, it supports both standard and remote RX3i rack/base configurations. Q: Is the input voltage flexible for worldwide installation?A: Yes, the auto-sensing AC input accommodates 120–240 VAC at 47–63 Hz. Q: Does it provide protection for connected modules?A: Yes, input-to-output isolation ensures safe and reliable operation.
$200.00 $100.00
-
General Electric GE IC694MDL753 High-Density Discrete Input Module | PACSystems RX3i
Product Description The GE IC694MDL753 is a 32-point high-density discrete input module engineered for PACSystems RX3i PLCs. It captures digital signals from field devices such as switches, sensors, and contact closures, delivering precise real-time data to the PLC CPU. Designed for high-noise industrial environments, this module incorporates optical isolation, fast response times, and hot-swappable operation, ensuring uninterrupted performance in critical applications. Its compact design optimizes rack space without compromising functionality. Key Features 32 isolated input points in a high-density layout, reducing rack footprint. Channel-to-channel and channel-to-system optical isolation for reliable signal integrity. Rapid input response (<1 ms typical) for accurate real-time monitoring. Compatible with 24-pin quick-connect cables (IC693CBL328/329) for simplified wiring. Hot-swappable design allows replacement without shutting down the system. Rugged construction for industrial environments with temperature and humidity tolerance. Technical Specifications Parameter Specification Manufacturer GE Fanuc / Emerson Part Number IC694MDL753 Product Type High-Density Discrete Input Module PLC Compatibility PACSystems RX3i Input Points 32 isolated inputs Nominal Input Voltage 24 VDC Input Type Contact closure or logic-level signals Input Current ~7 mA per point at 24 VDC Isolation Channel-to-channel and channel-to-system Response Time Typically <1 ms Connector Type 24-pin Fujitsu (compatible with IC693CBL328/329) Mounting RX3i rack/baseplate Operating Temperature 0–60 °C Storage Temperature -40 to +85 °C Humidity Range 5–95% RH, non-condensing Weight 0.45 kg Applications Manufacturing and industrial automation systems. Process control for oil & gas, chemical, and energy sectors. Transportation and material handling systems. High-density PLC I/O configurations requiring reliable digital inputs. FAQ Q: How many inputs does IC694MDL753 support?A: It provides 32 isolated discrete input points. Q: Can it be replaced while the system is running?A: Yes, it supports hot-swappable operation with compatible RX3i racks. Q: Which cables are compatible for connections?A: Use 24-pin quick-connect cables IC693CBL328 or IC693CBL329. Q: Is it suitable for noisy industrial environments?A: Yes, optical isolation protects against electrical noise and ensures signal integrity.
$200.00 $100.00
-
General Electric GE IC694CHS392 10-Slot Expansion Baseplate | PACSystems RX3i
Product Description The GE IC694CHS392 is a 10-slot expansion baseplate designed for GE Fanuc PACSystems RX3i PLCs, providing a robust mechanical and electrical framework for system expansion. It accommodates up to 10 I/O or specialty modules, distributing power and signals efficiently through its universal backplane. Engineered for reliability and high-speed communication, this baseplate ensures seamless integration of analog, digital, and communication modules, supporting complex automation and process control applications. Key Features Supports up to 10 modules including analog, digital, and specialty I/O modules. Universal backplane ensures compatibility with RX3i CPUs and modules. Regulated power distribution across all installed modules. High-speed backplane bus provides efficient module-to-CPU communication. Industrial-grade construction suitable for harsh operating environments. Easy to install, enabling quick expansion of multi-rack PLC systems. Technical Specifications Parameter Specification Manufacturer GE Fanuc / Emerson Part Number IC694CHS392 Product Type 10-Slot Expansion Baseplate PLC Compatibility PACSystems RX3i Module Slots 10 Backplane Type Universal RX3i Power Distribution Regulated power to installed modules Communication Path High-speed backplane bus Mounting Style Rack / Baseplate Dimensions 17 × 7 × 2 in (43 × 17.8 × 5.1 cm) Weight 1.5 kg Operating Temperature 0–60 °C Storage Temperature -40 to +85 °C Humidity Range 5–95% RH, non-condensing Applications Expanding PACSystems RX3i racks for complex automation systems. Industrial manufacturing, process control, and energy distribution. Transportation systems and large-scale control panels. Supporting analog, digital, and specialty communication modules. FAQ Q: How many modules can IC694CHS392 accommodate?A: It supports up to 10 modules, including analog, digital, and specialty I/O modules. Q: Is it compatible with older RX3i CPUs?A: Yes, the universal backplane ensures full compatibility with RX3i PLC CPUs and modules. Q: Can this baseplate operate in harsh environments?A: Yes, it is built to industrial-grade standards with reliable power and signal distribution. Q: Can modules be hot-swapped on this baseplate?A: Hot-swapping depends on the module type; standard RX3i I/O modules support safe insertion and removal without system shutdown.
$200.00 $100.00
You have seen 48 out of 142 products