8 in stock
Delivery within 48 hours, pay afterwards
Mid weeks Monday to friday we offer next day delivery if the product is on stock and exceptions on holidays.
Weekends We offer no deliveries in the weekends.
International Depending on where you’re located, we offer next day delivery. Check your status on this link
Product OverviewThe Triconex 3624 is a high-integrity supervised digital output module designed for critical safety-instrumented systems. It provides reliable control interfacing for safety-critical applications, including emergency shutdown (ESD) systems. By integrating advanced field-line monitoring, the module continuously detects open-circuit and short-circuit conditions, whether the field load is currently energized or de-energized. This capability ensures that command execution is verified and helps prevent spurious trips in demanding environments such as chemical processing, power generation, and oil refining.Features
Triple Modular Redundant (TMR) architecture utilizing 2-out-of-3 (2oo3) voting logic for fault-tolerant operation.
Integrated field-line supervision that monitors integrity without triggering connected loads.
Galvanic isolation via high-performance optocouplers to protect internal logic from field-side voltage transients.
Supports online hot-swapping, allowing for module replacement without interrupting the operation of other I/O loops.
16 independent, supervised output channels.
ApplicationsThis module is engineered for safety-critical industrial environments where high availability and fault tolerance are mandatory. Typical installations include emergency shutdown systems (ESD), burner management systems, and critical process control loops where continuous diagnostic feedback is required to maintain operational safety.Technical Specifications
Model
3624
Output Channels
16 Supervised
Nominal Voltage
24 VDC
Voltage Operating Range
20 to 30 VDC
Max Current per Channel
2 A
Isolation Rating
1500 VDC
Power Consumption
10 W (max)
Operating Temperature
0 to +60 deg C
Installation Guidelines
Ensure the Triconex chassis is properly grounded before installing the module.
Handle the module using standard ESD-safe practices to prevent damage to sensitive internal components.
The module is designed for hot-swapping; however, ensure all field wiring is properly secured and verified before inserting the module into the rack.
Route field wiring away from high-voltage AC lines or high-EMI sources to maintain signal integrity.
Verify that the voltage levels and load requirements are within the specified 20-30 VDC range before activation.
FAQDoes the 3624 support hot-swapping? Yes, the module is designed for hot-swapping, allowing maintenance personnel to replace the unit while the chassis remains powered and other I/O modules continue to operate.What is the primary function of the line supervision? The supervision circuitry continuously monitors the field wiring for faults like open circuits or shorts, providing diagnostic data to the safety system without actuating the connected field devices.
8 in stock
Delivery within 48 hours, pay afterwards
Mid weeks Monday to friday we offer next day delivery if the product is on stock and exceptions on holidays.
Weekends We offer no deliveries in the weekends.
International Depending on where you’re located, we offer next day delivery. Check your status on this link
10 in stock
Delivery within 48 hours, pay afterwards
Mid weeks Monday to friday we offer next day delivery if the product is on stock and exceptions on holidays.
Weekends We offer no deliveries in the weekends.
International Depending on where you’re located, we offer next day delivery. Check your status on this link
Product OverviewThe Triconex 2551 is a specialized external termination assembly designed for integration with high-availability safety instrumented systems. This hardware serves as a critical interface component, facilitating the transition from field-based digital input wiring to the internal processing architecture of the Triconex system. By providing a structured termination point, the 2551 ensures secure signal routing and electrical integrity for critical safety loops in demanding industrial environments, including petrochemical, power generation, and chemical processing facilities.Features
Designed specifically to support Triple Modular Redundant (TMR) system architectures.
Provides robust physical termination for field digital input signals.
Integrated transient protection circuitry to mitigate the impact of electrical noise and voltage spikes.
Heavy-duty screw terminal blocks designed for secure, vibration-resistant wire connections.
Includes dedicated grounding provisions to assist in shielding and common-mode noise suppression.
Engineered for high-reliability performance in safety-critical control applications.
ApplicationsThe 2551 External Terminator is utilized primarily in safety-critical applications where reliable signal acquisition from field sensors is paramount. It is commonly deployed in emergency shutdown systems (ESD), burner management systems (BMS), and fire and gas detection arrays within complex industrial plants.Technical Specifications
Model
2551
Brand
Triconex (Invensys)
Component Type
External Terminator (Digital Input)
Operating Temperature
0 to 60 deg C
Weight
3.75 kg
Installation Guidelines
Ensure the system is fully de-energized before performing any wiring or installation of the termination module.
Mount the module in a location that minimizes exposure to extreme thermal gradients or excessive vibration.
Utilize appropriate wire gauges for the screw terminals to ensure a gas-tight, secure connection; verify all terminals are torqued to manufacturer specifications.
Ensure all grounding bars are connected to a clean, low-impedance earth ground to maintain effective EMI/RFI shielding.
Maintain proper clearance for cable routing to avoid signal crosstalk and to facilitate modular maintenance access.
FAQWhat is the primary function of the Triconex 2551?The 2551 acts as an interface bridge between field-side digital inputs and the Triconex controller, providing organized signal termination, transient protection, and improved electrical noise rejection.Is this module suitable for TMR systems?Yes, the 2551 is designed to support the signal distribution requirements of Triple Modular Redundant (TMR) safety architectures.
10 in stock
Delivery within 48 hours, pay afterwards
Mid weeks Monday to friday we offer next day delivery if the product is on stock and exceptions on holidays.
Weekends We offer no deliveries in the weekends.
International Depending on where you’re located, we offer next day delivery. Check your status on this link
5 in stock
Delivery within 48 hours, pay afterwards
Mid weeks Monday to friday we offer next day delivery if the product is on stock and exceptions on holidays.
Weekends We offer no deliveries in the weekends.
International Depending on where you’re located, we offer next day delivery. Check your status on this link
The Triconex 3005 is a primary Main Processor Module engineered for high-availability, safety-critical control environments. As the central computational component of the Triconex safety system, it utilizes a robust Triple Modular Redundancy (TMR) architecture to maintain operational integrity in demanding industrial sectors, including petrochemical processing, power generation, and critical manufacturing.Features
TMR Architecture: Employs triple-redundant processing paths to ensure continuous fault tolerance and high-integrity logic execution.
Fault Isolation: Features high-speed hardware voting mechanisms that identify and mask discrepancies across channels, preventing single-point failures.
Hot-Swappable Design: Engineered for seamless maintenance, allowing for module replacement during active system operation without compromising safety or control functions.
Synchronized Processing: Utilizes the proprietary Tribus backplane for high-speed cross-communication and synchronization between independent microprocessor channels.
ApplicationsThe 3005 module is intended for use in safety instrumented systems (SIS) where continuous uptime and reliable fault detection are mandatory. Typical applications include emergency shutdown systems (ESD), burner management, and critical process control where downtime or system failure could lead to significant environmental or safety hazards.Technical Specifications
Brand
Triconex
Model
3005
Module Type
Main Processor
Architecture
Triple Modular Redundancy (TMR)
Operating Temperature
0 to 60 deg C
Power Consumption
15 W (typical)
Installation Guidelines
Ensure the Triconex chassis is properly grounded before installing or removing any modules.
Handle the module using standard ESD (Electrostatic Discharge) safety protocols to prevent damage to internal circuitry.
Verify that the backplane slots are clear of debris and that the module is fully seated to ensure reliable connection with the Tribus bus.
Perform system diagnostics after installation to confirm that the new processor is correctly synchronized with the existing TMR cluster.
Always power down or follow established hot-swap procedures per the specific system manual before physical handling.
FAQIs the 3005 module compatible with all Triconex systems? The 3005 is a specific processor model; please verify your existing chassis configuration and firmware requirements to ensure compatibility with your specific safety system revision.Does this module support hot-swapping? Yes, the 3005 is designed for online maintenance, allowing for removal and replacement in a live system without interrupting the safety functions of the remaining redundant channels.
5 in stock
Delivery within 48 hours, pay afterwards
Mid weeks Monday to friday we offer next day delivery if the product is on stock and exceptions on holidays.
Weekends We offer no deliveries in the weekends.
International Depending on where you’re located, we offer next day delivery. Check your status on this link
DescriptionThe 170INT11003 is a specialized communication adapter module designed for the Schneider Electric Modicon Premium automation platform. This unit serves as an Interbus interface, facilitating seamless data exchange and network connectivity within industrial control architectures. Please note that this component has been discontinued by the manufacturer, making it a critical spare part for maintaining legacy control systems.Features
Designed for integration with Modicon Premium series processors.
Provides dedicated Interbus communication protocol support.
Features SUPI3 technology for reliable fieldbus data management.
Compact hardware footprint suitable for standard rack-mount installations.
Technical Specifications
Manufacturer
Schneider Electric
Model Number
170INT11003
Module Type
Interbus Communication Adapter
Technology
SUPI3
Status
Discontinued
Installation Guidelines
Ensure the PLC rack power is fully disconnected before attempting to insert or remove the communication module.
Verify that the module is correctly seated in the designated slot to ensure proper backplane connectivity.
Handle the module by the edges to prevent electrostatic discharge (ESD) damage to the internal circuitry.
Confirm that the Interbus cabling is shielded and routed away from high-voltage power lines to minimize electromagnetic interference (EMI).
Check for proper ventilation around the rack to maintain operating temperatures within specified industrial limits.
FAQIs this module compatible with all Modicon Premium CPUs?The 170INT11003 is specific to Interbus network configurations within the Modicon Premium range. Compatibility depends on your specific rack configuration and firmware version. Consult your original system documentation to verify slot requirements.What does the SUPI3 designation indicate?SUPI3 refers to the specific Siemens Universal Protocol Interface technology integrated into this module to manage the Interbus fieldbus communication tasks.
7 in stock
Delivery within 48 hours, pay afterwards
Mid weeks Monday to friday we offer next day delivery if the product is on stock and exceptions on holidays.
Weekends We offer no deliveries in the weekends.
International Depending on where you’re located, we offer next day delivery. Check your status on this link
DescriptionThe Schneider Electric Modicon Quantum 140CRA21110 is a specialized Distributed I/O (DIO) drop interface module designed for the Modicon Quantum automation platform. This unit facilitates reliable communication between remote I/O racks and the central PLC controller. By integrating both the communication interface and a dedicated AC power supply into a single housing, it optimizes space within field enclosures while maintaining deterministic data transmission across the Modbus Plus network.Features
Integrated Power and Comm: Combines a single-port Modbus Plus network interface with an internal AC power supply to drive remote rack backplanes.
Manual Addressing: Features front-mounted rotary decimal switches for quick, hardware-level station addressing (1 to 64).
Real-Time Monitoring: Includes front-panel status indicators to provide immediate visual verification of network traffic, power status, and module health.
Robust Design: Engineered for demanding industrial environments, including chemical processing, mining, and manufacturing facilities.
High Availability: Designed to maintain synchronized, deterministic signal processing to minimize downtime in critical control loops.
Technical Specifications
Model
140CRA21110
Brand
Schneider Electric
Series
Modicon Quantum
Module Type
DIO Drop Interface Module
Network Protocol
Modbus Plus (Single Port)
Input Voltage (115 VAC)
93 to 132 VAC (47-63 Hz)
Input Voltage (230 VAC)
170 to 264 VAC (47-63 Hz)
Station Address Range
1 to 64
Max Inrush Current
10A (115V) / 20A (230V)
Operating Temperature
0 to 60 deg C
Storage Temperature
-40 to 85 deg C
Humidity
95% non-condensing
Installation Guidelines
Power Safety: Always ensure the system power is disconnected before installing or removing the module from the rack backplane.
ESD Precautions: Handle the module using proper electrostatic discharge (ESD) prevention techniques to protect sensitive internal circuitry.
Mounting: Ensure the module is fully seated in the rack slot and secured according to standard Quantum backplane mounting procedures.
Grounding: Follow standard industrial grounding practices to minimize EMI and ensure signal integrity across the Modbus Plus network.
Environment: Maintain adequate clearance around the module to facilitate airflow and heat dissipation within the enclosure.
FAQQ: Does this module require external software for addressing?A: No, the 140CRA21110 uses physical rotary switches on the front panel to set the station address, allowing for rapid configuration without software tools.Q: Can this module operate on both 115V and 230V AC?A: Yes, it is designed to accept wide-range AC utility power, covering 115 VAC and 230 VAC nominal ranges with specific tolerance bands.Q: What is the primary function of the 140CRA21110?A: It acts as an interface between a remote Modicon Quantum I/O rack and the main control system via a Modbus Plus network, while simultaneously providing the necessary DC power to the local rack backplane.
7 in stock
Delivery within 48 hours, pay afterwards
Mid weeks Monday to friday we offer next day delivery if the product is on stock and exceptions on holidays.
Weekends We offer no deliveries in the weekends.
International Depending on where you’re located, we offer next day delivery. Check your status on this link
8 in stock
Delivery within 48 hours, pay afterwards
Mid weeks Monday to friday we offer next day delivery if the product is on stock and exceptions on holidays.
Weekends We offer no deliveries in the weekends.
International Depending on where you’re located, we offer next day delivery. Check your status on this link
DescriptionThe Triconex 2553 is a specialized dual-panel External Termination Assembly (ETA) designed to facilitate reliable signal interfacing within Triconex digital input subsystems. This unit serves as a critical bridge between field instrumentation and high-density PLC input modules, ensuring robust signal conditioning for 24 VAC/VDC discrete inputs. By centralizing field wiring and providing integrated protection, the 2553 supports high-integrity data acquisition in demanding industrial environments, including power generation and petrochemical processing.Features
Dual-panel configuration designed for efficient field wiring management.
Optimized for 24 VAC/VDC digital input signal conditioning.
Integrated test points to simplify maintenance and loop troubleshooting.
Field-side fuse protection to shield sensitive PLC input circuitry from transient electrical faults.
High-density layout suitable for installation within standard marshalling cabinets.
ApplicationsThis termination assembly is commonly deployed in safety-critical and process control systems where discrete signal integrity is paramount. Typical applications include the integration of proximity sensors, mechanical limit switches, and auxiliary relay contacts into the Triconex safety PLC architecture.Technical Specifications
Model
2553
Brand
Triconex
Module Type
Digital Input External Termination Panel
Input Rating
24 VAC/VDC
Operating Temperature
0 to 60 deg C
Weight
1.84 kg
Installation Guidelines
Ensure all power to the system is disconnected before installing or removing the termination assembly.
Mount the module securely on a standard DIN rail within a clean, dry, and temperature-controlled marshalling cabinet.
Maintain physical separation between high-voltage field wiring and low-voltage signal cables to minimize electromagnetic interference (EMI).
Verify proper grounding of the assembly to the cabinet chassis to ensure effective surge suppression.
Use appropriate wire gauges and torque settings as specified in your system's site-specific documentation.
FAQDoes the 2553 include fuses for channel protection?Yes, the 2553 is designed with field-side fuses to provide a layer of protection for the downstream input modules against electrical transients.Can this module be used for both AC and DC signals?Yes, the 2553 is rated for 24 VAC/VDC discrete inputs, making it versatile for various field device types.What is the primary purpose of the dual-panel design?The dual-panel architecture allows for high-density termination in space-constrained cabinets while maintaining clear separation between field-side and system-side cabling.
8 in stock
Delivery within 48 hours, pay afterwards
Mid weeks Monday to friday we offer next day delivery if the product is on stock and exceptions on holidays.
Weekends We offer no deliveries in the weekends.
International Depending on where you’re located, we offer next day delivery. Check your status on this link
7 in stock
Delivery within 48 hours, pay afterwards
Mid weeks Monday to friday we offer next day delivery if the product is on stock and exceptions on holidays.
Weekends We offer no deliveries in the weekends.
International Depending on where you’re located, we offer next day delivery. Check your status on this link
The Schneider Electric TSXP4720 is a dedicated module designed for the TSX series programmable controller architecture. This unit serves as a critical component for legacy automation control systems, providing reliable processing and interface capabilities for industrial logic applications.Features
Engineered specifically for compatibility with the Schneider Electric TSX series controller environment.
Robust construction designed for standard industrial control cabinet mounting.
Reliable operation for legacy PLC infrastructure maintenance and system expansion.
Integrated design to facilitate seamless communication within the TSX backplane architecture.
Technical Specifications
Model
TSXP4720
Manufacturer
Schneider Electric
Series
TSX Series
Product Type
Programmable Controller Module
Weight
1.1 kg
Installation Guidelines
Ensure the controller power is fully disconnected before attempting to install or remove the TSXP4720 module to prevent electrical damage or system faults.
Verify that the module is properly seated in the designated TSX series rack slot to ensure reliable backplane connectivity.
Maintain adequate clearance around the module to allow for proper thermal dissipation and airflow within the enclosure.
Adhere to standard ESD (Electrostatic Discharge) handling procedures during installation to protect sensitive internal circuitry.
Confirm that all associated field wiring is correctly terminated according to the specific system documentation and local electrical safety standards.
FAQIs the TSXP4720 still in production?No, the TSXP4720 is classified as discontinued by the manufacturer. We provide this unit as a reliable solution for maintaining or repairing existing legacy installations.What should I do if the module is not recognized by the PLC rack?First, verify that the module is firmly seated in the rack and that the backplane pins are not bent. Ensure that the system power supply is sufficient and that the configuration software reflects the correct slot assignment for this module.
7 in stock
Delivery within 48 hours, pay afterwards
Mid weeks Monday to friday we offer next day delivery if the product is on stock and exceptions on holidays.
Weekends We offer no deliveries in the weekends.
International Depending on where you’re located, we offer next day delivery. Check your status on this link
9 in stock
Delivery within 48 hours, pay afterwards
Mid weeks Monday to friday we offer next day delivery if the product is on stock and exceptions on holidays.
Weekends We offer no deliveries in the weekends.
International Depending on where you’re located, we offer next day delivery. Check your status on this link
DescriptionThe Schneider Electric 140DDI85300 is a high-density discrete input module engineered for the Modicon Quantum PLC platform. This module is specifically designed to interface with 230 VAC field devices, converting high-voltage input signals into internal logic levels for the controller. It is a critical component for large-scale automation systems in sectors such as water treatment, power generation, and chemical processing, where reliable monitoring of AC-powered field devices is required. The module features robust opto-isolation to shield internal control circuitry from electrical noise and voltage transients common in industrial environments.Features
32 discrete input channels, organized into four isolated groups of eight.
Supports a wide input voltage range of 170 to 276 VAC.
Internal RC filtering on each channel to mitigate contact bounce and high-frequency interference.
Front-panel LED status indicators for real-time channel diagnostics.
Supports hot-swapping capability within compatible Quantum backplane configurations.
Integrated opto-isolation between field circuits and the backplane for enhanced system protection.
Technical Specifications
Model
140DDI85300
Input Points
32 (4 groups of 8)
Voltage Category
230 VAC
Input Voltage Range
170 to 276 VAC
Frequency Range
47 to 63 Hz
Internal Bus Power
300 mA at 5 VDC
Isolation Voltage
1780 Vrms (1 minute)
Response Time
12 to 24 ms
Operating Temperature
0 to 60 deg C
Storage Temperature
-40 to 85 deg C
Relative Humidity
0 to 95% (non-condensing)
Installation Guidelines
Ensure the Quantum rack is powered down before inserting or removing the module to prevent electrical damage.
Verify that field wiring is properly shielded and routed away from high-voltage power cables to minimize EMI.
Ensure the module is fully seated in the backplane slot and the locking tabs are engaged.
Maintain adequate ventilation within the cabinet to keep ambient temperatures within the 0 to 60 deg C operating range.
Check that the input power source matches the 230 VAC specification before connecting to the terminal block.
FAQIs this module compatible with other Modicon series?The 140DDI85300 is designed specifically for the Modicon Quantum platform and is not directly compatible with Momentum or Premium series backplanes.Can I replace this module while the system is running?Yes, this module supports hot-swapping in supported Quantum rack configurations, allowing for replacement without halting the entire control process.What is the purpose of the 4 isolated groups?The grouping allows you to interface with different AC power phases or independent power sources on a single module, providing greater flexibility for complex cabinet wiring.
9 in stock
Delivery within 48 hours, pay afterwards
Mid weeks Monday to friday we offer next day delivery if the product is on stock and exceptions on holidays.
Weekends We offer no deliveries in the weekends.
International Depending on where you’re located, we offer next day delivery. Check your status on this link
9 in stock
Delivery within 48 hours, pay afterwards
Mid weeks Monday to friday we offer next day delivery if the product is on stock and exceptions on holidays.
Weekends We offer no deliveries in the weekends.
International Depending on where you’re located, we offer next day delivery. Check your status on this link
DescriptionThe Schneider Electric 140CPU65160 is a high-performance central processing unit engineered for the Modicon Quantum automation platform. Optimized for the Unity Pro software environment, this processor utilizes a 266 MHz RISC engine to manage complex algorithmic operations, floating-point calculations, and multi-network communication tasks. It is designed to sustain demanding industrial automation environments, including power generation, chemical processing, and large-scale manufacturing, by providing reliable control logic and minimizing system latency.Features
266 MHz RISC processor for high-speed logic execution.
1024 kB internal RAM, with 768 kB dedicated to program execution.
Integrated Modbus Plus and Modbus serial (RS-232/RS-485) communication ports.
Dedicated USB interface for local programming and maintenance access.
PCMCIA Type III memory expansion slot for external data logging and application storage.
Advanced onboard diagnostic monitoring for internal parity and bus transaction integrity.
Supports high-density distributed I/O configurations up to 8000 digital and 1024 analog points.
Technical Specifications
Model
140CPU65160
Processor Speed
266 MHz
Internal Logic RAM
1024 kB
Power Consumption
12.5 W
Backplane Current
2.5 A @ 5 VDC
Operating Temperature
0 to 60 deg C
Storage Temperature
-40 to 85 deg C
Humidity
0 to 95% (non-condensing)
Installation Guidelines
Ensure the rack is powered down before inserting or removing the CPU module to prevent electrical damage.
Verify that the backplane is properly grounded to mitigate electromagnetic interference (EMI).
Maintain adequate ventilation around the Quantum rack to accommodate the 12.5 W heat dissipation.
Use shielded cables for all serial communication connections to ensure signal integrity.
Handle with standard ESD precautions to protect internal circuitry during installation or memory card insertion.
FAQWhat software is required for this CPU?The 140CPU65160 is designed for use with the Schneider Electric Unity Pro software suite.Can I expand the memory of this module?Yes, the module features a front-facing PCMCIA Type III slot that supports memory cards for additional storage of application files and data logs.Does this processor support redundant operations?The onboard diagnostic logic is designed to monitor system health and can switch to a supervisor state to maintain control loop execution in the event of memory errors or network collisions.
9 in stock
Delivery within 48 hours, pay afterwards
Mid weeks Monday to friday we offer next day delivery if the product is on stock and exceptions on holidays.
Weekends We offer no deliveries in the weekends.
International Depending on where you’re located, we offer next day delivery. Check your status on this link
9 in stock
Delivery within 48 hours, pay afterwards
Mid weeks Monday to friday we offer next day delivery if the product is on stock and exceptions on holidays.
Weekends We offer no deliveries in the weekends.
International Depending on where you’re located, we offer next day delivery. Check your status on this link
DescriptionThe Schneider Electric XBTF034510 is a high-performance operator interface terminal from the Magelis series. Designed for industrial visualization and control, this unit features a 10.4-inch touch screen interface, providing clear data display and intuitive input capabilities for machine operators. Although this model has been discontinued by the manufacturer, it remains a critical component for maintaining legacy automation systems and human-machine interface (HMI) stations.Features
Large 10.4-inch display for enhanced operator visibility
Integrated touch screen interface for streamlined process control
Designed for 24 VDC power supply environments
Robust construction suitable for demanding plant-floor conditions
Part of the established Magelis series operator interface ecosystem
Technical Specifications
Manufacturer
Schneider Electric
Model Number
XBTF034510
Series
Magelis
Display Size
10.4 inches
Supply Voltage
24 VDC
Power Consumption
35 W
Status
Discontinued by Manufacturer
Installation Guidelines
Ensure the control cabinet is properly ventilated to dissipate the 35 W heat load generated during operation.
Verify that the 24 VDC power source is stable and filtered to prevent signal noise or premature component failure.
Mount the panel in a cutout that meets the manufacturer's specified dimensions to maintain the integrity of the bezel seal.
Use appropriate ESD precautions when handling the terminal to protect internal circuitry.
Confirm that all communication cables are shielded and routed away from high-voltage power lines to minimize electromagnetic interference.
FAQIs the XBTF034510 still supported by Schneider Electric?This specific model is classified as discontinued by the manufacturer. While it may no longer be available for direct purchase from new stock, it is often sourced through specialized industrial suppliers to support existing installations.What power supply is required for this operator panel?The XBTF034510 is designed to operate on a 24 VDC power supply with a power consumption of 35 W.
9 in stock
Delivery within 48 hours, pay afterwards
Mid weeks Monday to friday we offer next day delivery if the product is on stock and exceptions on holidays.
Weekends We offer no deliveries in the weekends.
International Depending on where you’re located, we offer next day delivery. Check your status on this link
8 in stock
Delivery within 48 hours, pay afterwards
Mid weeks Monday to friday we offer next day delivery if the product is on stock and exceptions on holidays.
Weekends We offer no deliveries in the weekends.
International Depending on where you’re located, we offer next day delivery. Check your status on this link
DescriptionThe Triconex 3805EN is a specialized 8-point analog output module engineered for integration into Triple Modular Redundant (TMR) safety instrumented systems. Designed to provide precise 4-20 mA DC signals, this module is essential for controlling critical final control elements in demanding industrial sectors including power generation, chemical manufacturing, and hydrocarbon processing. The unit is built to maintain high availability and safety integrity, ensuring that control loops remain operational even in the event of internal component faults.Features
TMR Architecture: Utilizes three independent processing channels with integrated voting logic to ensure fault-tolerant output delivery.
High-Precision Signaling: Delivers reliable 4-20 mA DC coupled outputs for actuators, valves, and other analog-controlled field devices.
Diagnostic Monitoring: Includes comprehensive internal diagnostics to monitor loop status and module health, reducing the risk of undetected failures.
Channel Isolation: Features 8 independent output points, providing electrical isolation to protect the integrity of the control system.
ApplicationsThe 3805EN is typically deployed in safety-critical applications where process continuity is mandatory. Its primary use cases include driving final control elements in emergency shutdown systems (ESD), burner management systems (BMS), and high-integrity pressure control loops where the loss of an output signal could result in significant operational hazards.Technical Specifications
Brand
Triconex
Model
3805EN
Module Type
Analog Output Module
Channel Count
8 Points
Output Range
4-20 mA DC
System Architecture
Triple Modular Redundant (TMR)
Operating Temperature
0 to 60 deg C
Installation Guidelines
System Power: Always ensure the Triconex chassis is powered down before inserting or removing the 3805EN module to prevent electrical arcing and potential damage to the backplane.
ESD Precautions: Handle the module using proper electrostatic discharge (ESD) prevention techniques, such as wearing a grounded wrist strap, to protect sensitive internal circuitry.
Wiring Integrity: Use shielded cabling for all analog output loops to minimize electromagnetic interference (EMI) and ensure signal accuracy.
Environmental Cooling: Maintain adequate airflow within the cabinet to ensure the ambient temperature around the module remains within the specified 0-60 deg C range.
Seating: Ensure the module is fully seated and the locking mechanisms are engaged to guarantee a secure connection with the chassis bus.
FAQIs the 3805EN compatible with all Triconex TMR systems?The 3805EN is designed for specific TMR safety systems. Please verify your system's hardware revision and compatibility requirements before installation.Does this module support loop-powered devices?Yes, the module is designed to support both loop-powered and self-powered configurations for field devices within its specified 4-20 mA range.
8 in stock
Delivery within 48 hours, pay afterwards
Mid weeks Monday to friday we offer next day delivery if the product is on stock and exceptions on holidays.
Weekends We offer no deliveries in the weekends.
International Depending on where you’re located, we offer next day delivery. Check your status on this link
6 in stock
Delivery within 48 hours, pay afterwards
Mid weeks Monday to friday we offer next day delivery if the product is on stock and exceptions on holidays.
Weekends We offer no deliveries in the weekends.
International Depending on where you’re located, we offer next day delivery. Check your status on this link
The Foxboro P0916CC is a specialized terminal board assembly designed for the I/A Series 200 I/O subsystem. This component functions as a critical interface bridge, connecting field-level instrumentation to the system's Fieldbus Modules (FBMs). By providing a structured and secure termination point, the P0916CC ensures reliable signal distribution and protects the integrity of the control system against field-side electrical faults.Features
Designed for integration within the Foxboro I/A Series 200 architecture.
High-density screw-terminal interface for secure and reliable field wiring.
Facilitates streamlined signal routing for both analog and discrete I/O configurations.
Integrated passive noise filtering to maintain signal clarity.
Includes dedicated test points for convenient loop diagnostics and maintenance verification.
Rugged construction capable of withstanding standard industrial thermal and vibration profiles.
ApplicationsThis termination assembly is widely deployed in mission-critical process control environments, including petrochemical refineries, power generation plants, and chemical processing facilities. It is essential for systems requiring high-availability signal paths and modular maintenance capabilities.Technical Specifications
Model
P0916CC
Series
I/A Series 200
Termination Method
Screw Terminal Blocks
Voltage Rating
30 VDC
Operating Temperature
0 to 60 deg C
Storage Temperature
-40 to 70 deg C
Humidity
5 to 95 percent (non-condensing)
Installation Guidelines
Ensure all power is disconnected from the I/O subsystem before installing or removing the terminal board.
Mount the unit in a clean, dry location within the control cabinet, ensuring adequate clearance for cable management.
Use appropriate ESD protection when handling the module to prevent damage to integrated circuits.
Verify that field wiring is properly secured in the screw terminals to prevent intermittent connections caused by industrial vibration.
Route signal cables separately from high-voltage power lines to minimize electromagnetic interference (EMI).
Periodically inspect terminal connections for signs of oxidation or thermal stress as part of routine preventative maintenance.
FAQIs the P0916CC compatible with all Foxboro FBMs?The P0916CC is designed for specific I/A Series 200 applications. Please verify your FBM compatibility list and system documentation to ensure the specific pinout and signal requirements match your current module configuration.Can I replace this board while the system is running?While the modular design allows for easier maintenance, you must follow your site's specific safety procedures and the Foxboro I/A Series hardware manual regarding hot-swapping or power-down requirements for your specific I/O configuration.
6 in stock
Delivery within 48 hours, pay afterwards
Mid weeks Monday to friday we offer next day delivery if the product is on stock and exceptions on holidays.
Weekends We offer no deliveries in the weekends.
International Depending on where you’re located, we offer next day delivery. Check your status on this link
3 in stock
Delivery within 48 hours, pay afterwards
Mid weeks Monday to friday we offer next day delivery if the product is on stock and exceptions on holidays.
Weekends We offer no deliveries in the weekends.
International Depending on where you’re located, we offer next day delivery. Check your status on this link
DescriptionThe Schneider Electric TSX4740 serves as a high-performance central processing unit for the legacy Modicon TSX 47 automation series. Engineered for demanding industrial environments, this processor handles complex logic, floating-point calculations, and motion control tasks required in automated manufacturing and process control. It provides deterministic execution of control programs, ensuring reliable operation for both local and distributed I/O architectures in sectors such as automotive manufacturing and chemical processing.Features
Multitasking operating system for prioritized execution of critical control rungs.
Dedicated interfaces for programming and HMI integration.
Support for Telway network protocols to facilitate multi-PLC data exchange.
Modular memory management via plug-in RAM or EPROM cartridges for flexible application storage.
High-speed processing capabilities suitable for complex logic and data logging requirements.
ApplicationsThis processor module is designed for deployment in legacy Modicon TSX 47 rack systems. It is commonly utilized in large-scale machine control, distributed plant floor automation, and systems requiring integration with intelligent fieldbus peripherals.Technical Specifications
Model
TSX4740
Brand
Schneider Electric (Telemecanique)
Execution Speed
0.5 microseconds per Boolean instruction
Max I/O Capacity
1024 Discrete I/O
Internal RAM
32 Kwords (Expandable)
Power Consumption
15 Watts (Typical)
Backplane Current
3.0 A at 5 VDC
Communication
RS-485 / Telway Protocol
Operating Temperature
0 to 60 deg C
Storage Temperature
-25 to 70 deg C
Installation Guidelines
Ensure the rack power is disconnected before installing or removing the processor module.
Verify that the module is correctly seated in the TSX 47 rack backplane to ensure proper electrical contact.
Maintain adequate spacing around the module to allow for heat dissipation within the control cabinet.
Use shielded cables for communication ports to minimize interference in electrically noisy environments.
Handle with standard ESD precautions to prevent damage to internal circuitry.
FAQIs this module compatible with modern Modicon platforms?The TSX4740 is specifically designed for the legacy Modicon TSX 47 series. It is not natively compatible with newer Modicon platforms without specific gateway hardware or migration strategies.Does this unit require external memory?The module supports internal memory via plug-in RAM or EPROM cartridges. Please verify your specific application's memory requirements to ensure the correct cartridge is installed.
3 in stock
Delivery within 48 hours, pay afterwards
Mid weeks Monday to friday we offer next day delivery if the product is on stock and exceptions on holidays.
Weekends We offer no deliveries in the weekends.
International Depending on where you’re located, we offer next day delivery. Check your status on this link
8 in stock
Delivery within 48 hours, pay afterwards
Mid weeks Monday to friday we offer next day delivery if the product is on stock and exceptions on holidays.
Weekends We offer no deliveries in the weekends.
International Depending on where you’re located, we offer next day delivery. Check your status on this link
The Schneider 490NRP25400 is a dedicated fiber optic repeater module designed for the Modicon Quantum automation series. This unit is engineered to extend the reach of Remote I/O (RIO) and Modbus Plus networks by converting electrical signals into optical pulses. By utilizing fiber optic transmission, the module provides essential galvanic isolation, which protects sensitive control equipment from electromagnetic interference (EMI) and ground loops common in high-voltage industrial environments.Features
Supports multi-mode fiber optic communication (62.5/125 or 50/125 micrometers).
Equipped with ST connectors for secure and reliable optical coupling.
Transparent operation: requires no complex software configuration for data stream repetition.
Dual optical ports enable flexible network topologies, including point-to-point and star configurations.
Integrated status LEDs provide real-time diagnostic feedback for link monitoring and fault isolation.
Reduces signal degradation and timing jitter, supporting high-precision process synchronization.
ApplicationsThis repeater is ideal for large-scale distributed control architectures found in petrochemical refineries, power generation facilities, and mining operations. It is specifically suited for bridging communication between distant Quantum racks where copper cabling would be susceptible to electrical noise or exceed distance limitations.Technical Specifications
Model
490NRP25400
Brand
Schneider Electric / Modicon
Protocol
Modbus Plus / Remote I/O (RIO)
Fiber Type
Multi-mode
Wavelength
820 nm
Max Distance
3 km
Interface
ST Connectors
Power Consumption
250 mA at 5 VDC
Power Dissipation
1.25 W
Isolation
500 VDC
Operating Temperature
0 to 60 deg C
Humidity
5 to 95 percent (non-condensing)
Installation Guidelines
The module occupies a single slot on a standard Modicon Quantum backplane.
Power is supplied directly through the backplane; no external DC power source is required.
Ensure the fiber optic cable bend radius is maintained according to manufacturer specifications to prevent signal attenuation at the ST interface.
Always power down the rack before inserting or removing the module to prevent electrical damage.
Avoid routing fiber optic cables alongside high-voltage power lines to maintain signal integrity.
FAQDoes this module require software setup?No, the 490NRP25400 operates transparently on the network layer and does not require software configuration.What is the maximum distance supported?The module supports distances up to 3 km, depending on the specific attenuation characteristics of the fiber optic cable used.Can this module be used in high-vibration areas?Yes, the module is designed to meet industrial standards for vibration and shock resistance, making it suitable for installation near heavy machinery.
8 in stock
Delivery within 48 hours, pay afterwards
Mid weeks Monday to friday we offer next day delivery if the product is on stock and exceptions on holidays.
Weekends We offer no deliveries in the weekends.
International Depending on where you’re located, we offer next day delivery. Check your status on this link
1 in stock
Delivery within 48 hours, pay afterwards
Mid weeks Monday to friday we offer next day delivery if the product is on stock and exceptions on holidays.
Weekends We offer no deliveries in the weekends.
International Depending on where you’re located, we offer next day delivery. Check your status on this link
Product OverviewThe Triconex 7400028-100, designated as Model 8101, serves as a 15-slot expansion chassis specifically engineered for the Triconex Triple Modular Redundancy (TMR) safety instrumented systems. This robust hardware platform enables the expansion of I/O capacity in demanding industrial environments, including petrochemical processing, power generation, and critical infrastructure control. By providing a stable physical and electrical foundation, this chassis allows for the seamless integration of additional I/O modules into the existing safety architecture, ensuring high system availability and fault tolerance.Features
Designed for high-density I/O expansion in TMR safety systems.
Supports 15 slots for flexible module configuration.
Engineered with a passive backplane to enhance reliability and MTBF by removing active bus components.
Facilitates hot-swapping, allowing for module replacement or system expansion during active process operation.
Integrated dual-power rail distribution supports redundant power supply modules for increased uptime.
Physical slot keying ensures correct module alignment and prevents insertion errors.
ApplicationsThis expansion chassis is widely utilized in safety-critical applications where process continuity is paramount. It is commonly deployed in emergency shutdown (ESD) systems, burner management systems (BMS), and high-integrity pressure protection systems (HIPPS) where the Triconex TMR architecture is required to mitigate risks and protect plant assets.Technical Specifications
Model
7400028-100 (Model 8101)
Slot Capacity
15 Slots
Input Voltage Range
24 to 120 VDC
Current Rating
2 to 10 A
Operating Temperature
0 to 60 deg C
Installation Guidelines
Ensure the chassis is mounted in a clean, dry, and vibration-dampened environment consistent with industrial safety standards.
Maintain adequate clearance around the chassis to allow for proper airflow and cooling, preventing thermal throttling or hardware degradation.
Verify that all power sources are disconnected before installing or removing the chassis from the cabinet.
Use appropriate grounding procedures to connect the chassis frame to the system common ground to mitigate EMI/RFI interference.
Ensure all redundant power supply modules are correctly seated and keyed before applying power to the bus.
Perform a system verification check after hot-swapping any module to confirm proper communication with the Main Processor (MP).
FAQIs this chassis compatible with all Tricon series modules?The 7400028-100 is designed for the Tricon TMR system. Please consult your specific system documentation or the Triconex product catalog to ensure module compatibility based on your current firmware and processor generation.Does the chassis include power supplies?The 7400028-100 is the expansion chassis frame. Redundant power supply modules are typically ordered separately to meet specific power budget requirements for your I/O configuration.
1 in stock
Delivery within 48 hours, pay afterwards
Mid weeks Monday to friday we offer next day delivery if the product is on stock and exceptions on holidays.
Weekends We offer no deliveries in the weekends.
International Depending on where you’re located, we offer next day delivery. Check your status on this link
9 in stock
Delivery within 48 hours, pay afterwards
Mid weeks Monday to friday we offer next day delivery if the product is on stock and exceptions on holidays.
Weekends We offer no deliveries in the weekends.
International Depending on where you’re located, we offer next day delivery. Check your status on this link
DescriptionThe Triconex 4000056-006 is a robust, 6-foot (1.83-meter) cable assembly designed for seamless integration within Triconex safety instrumented systems. Engineered for reliability in demanding industrial settings, this quick-disconnect (QD) cable facilitates secure signal transmission between field-level sensors, switches, and system I/O modules. The assembly is constructed to maintain signal integrity in environments prone to mechanical vibration and electromagnetic interference, supporting the stringent requirements of SIL 3 safety architectures by ensuring consistent, low-latency connectivity.Features
Quick Disconnect Interface: Features a 5-pin configuration for rapid installation and field replacement, reducing mean time to repair (MTTR).
Signal Integrity: High-grade shielding and insulation protect against environmental noise and signal degradation.
Safety-Critical Design: Specifically engineered for compatibility with Triconex safety ecosystems to prevent intermittent faults.
Robust Construction: Built to endure the mechanical stresses of industrial plant operations.
ApplicationsThis cable assembly is intended for use in mission-critical safety applications, including but not limited to chemical and petrochemical processing, power generation facilities, and wastewater treatment plants where reliable sensor-to-controller communication is paramount.Technical Specifications
Model Number
4000056-006
Connector Type
5-pin Quick Disconnect (QD)
Cable Length
6 feet (1.83 meters)
Operating Temperature
-25 to 70 deg C
Application
Sensors and Switches Cord Set
Installation Guidelines
Ensure the system is powered down before connecting or disconnecting the cable assembly to prevent electrical arcing or damage to I/O module pins.
Verify that the 5-pin keying is properly aligned before engaging the connector to avoid damaging the internal contacts.
Route cables away from high-voltage power lines and sources of extreme heat to maintain signal shielding effectiveness.
Secure the cable with appropriate strain relief to prevent mechanical tension on the connector interface.
Regularly inspect the connector housing for signs of corrosion or physical damage, particularly in harsh or corrosive environments.
FAQIs this cable compatible with all Triconex systems?The 4000056-006 is designed for use within the Triconex ecosystem using 5-pin QD interfaces. Please verify your specific I/O module pinout and connector requirements against your system documentation to ensure full compatibility.What is the length of this specific model?The -006 suffix indicates a cable length of 6 feet (1.83 meters).
9 in stock
Delivery within 48 hours, pay afterwards
Mid weeks Monday to friday we offer next day delivery if the product is on stock and exceptions on holidays.
Weekends We offer no deliveries in the weekends.
International Depending on where you’re located, we offer next day delivery. Check your status on this link
10 in stock
Delivery within 48 hours, pay afterwards
Mid weeks Monday to friday we offer next day delivery if the product is on stock and exceptions on holidays.
Weekends We offer no deliveries in the weekends.
International Depending on where you’re located, we offer next day delivery. Check your status on this link
The Triconex 3000604-100 is a robust, high-density chassis designed specifically for Invensys Triconex safety systems. This unit functions as the primary or expansion infrastructure, providing the necessary mechanical support and electrical backplane connectivity for Triple Modular Redundancy (TMR) architectures. It is engineered to maintain system stability in demanding industrial environments, including petrochemical plants, offshore energy installations, and large-scale manufacturing facilities where safety instrumented functions (SIF) are critical.Features
Supports TMR (Triple Modular Redundancy) architecture for high-availability safety applications.
High-speed passive backplane ensures reliable communication between Main Processors and I/O modules.
Dual-power rail design facilitates redundant power supply configurations.
Integrated shielding per slot to mitigate electromagnetic interference (EMI) between logic and field signals.
Constructed from industrial-grade reinforced steel and aluminum alloy for long-term structural integrity.
Designed for SIL 3 compliance environments.
ApplicationsThis chassis is intended for use in mission-critical safety systems requiring high fault tolerance and continuous operation. It is commonly deployed in emergency shutdown systems (ESD), burner management systems (BMS), and process control applications where unplanned downtime must be strictly avoided.Technical Specifications
Model
3000604-100
Manufacturer
Invensys Triconex
Material
Reinforced Steel/Aluminum Alloy
Operating Temperature
0 to 60 deg C
Weight
24.9 kg
Installation Guidelines
Ensure the chassis is mounted in a clean, vibration-free environment with adequate airflow for thermal dissipation.
Verify that all power modules are seated correctly to utilize the dual-power rail design.
Always power down the system before inserting or removing any modules to prevent electrical arcing or damage to the backplane pins.
Ensure proper chassis grounding to the cabinet earth bus to maintain signal integrity and EMI protection.
Handle modules using ESD-safe procedures to protect sensitive electronic components during installation or maintenance.
FAQIs the 3000604-100 compatible with all Triconex modules?This chassis is designed to support standard Tricon modular configurations. Please verify specific module compatibility against your system's hardware revision requirements.Does this chassis include power supplies?No, the 3000604-100 is the mechanical and backplane chassis only. Power supply modules must be ordered and installed separately.
10 in stock
Delivery within 48 hours, pay afterwards
Mid weeks Monday to friday we offer next day delivery if the product is on stock and exceptions on holidays.
Weekends We offer no deliveries in the weekends.
International Depending on where you’re located, we offer next day delivery. Check your status on this link
1 in stock
Delivery within 48 hours, pay afterwards
Mid weeks Monday to friday we offer next day delivery if the product is on stock and exceptions on holidays.
Weekends We offer no deliveries in the weekends.
International Depending on where you’re located, we offer next day delivery. Check your status on this link
System OverviewThe Triconex 8111 High Density Main Chassis acts as the foundational infrastructure for Triple Modular Redundant (TMR) safety systems. Engineered for high-availability environments, this chassis provides the physical mounting and electrical backplane necessary to host Triconex control processors and I/O modules. It is specifically designed to support SIL 3 safety integrity requirements in demanding industries such as oil and gas, power generation, and chemical processing, ensuring reliable operation through robust, vibration-resistant construction.Architectural FeaturesThe 8111 chassis utilizes a passive backplane design that facilitates seamless, low-latency communication between triplicated controller sets. It supports dual-redundant power supplies, ensuring that the critical internal logic bus remains powered during potential power source interruptions. The high-density layout allows for efficient module packing, which optimizes cabinet space while maintaining sufficient thermal management for continuous operation. The metallic chassis also serves as a protective enclosure, offering shielding against electromagnetic interference (EMI) in harsh industrial settings.Technical Specifications
Model
8111
Brand
Invensys Triconex
Module Capacity
Triconex TMR Series modules
Operating Temperature
0 to 60 deg C
Storage Temperature
-40 to 85 deg C
Relative Humidity
5-95 percent non-condensing
Mounting
19-inch Rack Mount or Panel Mount
Installation Guidelines
Ensure the chassis is mounted in a clean, dry environment within an appropriately rated industrial cabinet.
Verify that the mounting surface is level and capable of supporting the static load of the chassis and installed modules.
Maintain adequate clearance around the chassis to facilitate proper airflow and thermal dissipation.
Always power down the chassis and associated power supplies before inserting or removing any I/O or processor modules.
Use proper grounding techniques for the chassis frame to ensure effective EMI shielding and electrical safety.
Handle modules with care to avoid damaging the backplane connectors or card guide alignments.
FAQIs the 8111 chassis compatible with all Triconex modules? The 8111 is designed for the Triconex TMR series; please verify specific module compatibility with your system revision.Does this chassis support redundant power? Yes, the 8111 is engineered to accommodate dual-redundant power supply modules to maintain continuous system uptime.What is the primary function of the passive backplane? The passive backplane provides the physical connectivity for the triplicated system, ensuring zero-latency communication between redundant controller sets without the risk of active component failure on the bus.
1 in stock
Delivery within 48 hours, pay afterwards
Mid weeks Monday to friday we offer next day delivery if the product is on stock and exceptions on holidays.
Weekends We offer no deliveries in the weekends.
International Depending on where you’re located, we offer next day delivery. Check your status on this link
6 in stock
Delivery within 48 hours, pay afterwards
Mid weeks Monday to friday we offer next day delivery if the product is on stock and exceptions on holidays.
Weekends We offer no deliveries in the weekends.
International Depending on where you’re located, we offer next day delivery. Check your status on this link
The Triconex 4107 Enhanced Intelligent Communication Module is a specialized interface component designed for integration within Triconex Triple Modular Redundant (TMR) safety systems. This module acts as a high-performance bridge between the safety controller and external supervisory networks, ensuring that safety-critical data is transmitted reliably while maintaining the deterministic performance required for SIL 3-rated safety instrumented systems.Features
Dedicated onboard processing for efficient protocol management and data handling.
Offloads communication overhead from the main safety processor to maintain optimal scan times.
Supports redundant network configurations to prevent single points of failure.
Integrated diagnostic monitoring for continuous verification of link layer and data integrity.
Front-panel status indicators for immediate visual feedback on module health and network activity.
Designed for high-availability environments where latency and data reliability are critical.
ApplicationsThe 4107 is widely deployed in mission-critical industrial sectors, including petrochemical facilities, oil and gas offshore platforms, and power generation plants. It is primarily used to facilitate communication between Triconex safety PLCs and plant-wide DCS or HMI systems, ensuring consistent monitoring and control of safety-related processes.Technical Specifications
Model
4107
Brand
Triconex
Module Type
Enhanced Intelligent Communication Module
Operating Temperature
0 to 60 deg C
Input Voltage
24 VDC Nominal
Power Consumption
10 W (Typical)
Processor
Dedicated Intelligent Communication Processor
Installation Guidelines
Ensure the Triconex system is powered down before inserting or removing the 4107 module to prevent electrical damage.
Verify that the module is correctly seated in the designated chassis slot to ensure proper backplane connection.
Use shielded communication cabling to minimize EMI interference in high-noise industrial environments.
Maintain proper ventilation in the equipment cabinet to ensure the module operates within the specified 0 to 60 deg C temperature range.
Follow standard ESD (Electrostatic Discharge) precautions when handling the module to protect sensitive internal circuitry.
FAQQ: Is the 4107 module compatible with all Triconex TMR systems?A: The 4107 is designed for specific Triconex architectures. Please verify your system's hardware configuration and compatibility requirements before installation.Q: What protocols are supported by the 4107?A: This module supports various communication protocols, including Modbus and Ethernet/IP, to facilitate seamless data exchange between the safety controller and external supervisory systems.Q: Does this module require specialized configuration?A: Yes, the 4107 requires configuration within the Triconex software environment to define communication parameters, network addresses, and data mapping for your specific application.
6 in stock
Delivery within 48 hours, pay afterwards
Mid weeks Monday to friday we offer next day delivery if the product is on stock and exceptions on holidays.
Weekends We offer no deliveries in the weekends.
International Depending on where you’re located, we offer next day delivery. Check your status on this link
DescriptionThe Foxboro CP60, identified by part number P0961FR, serves as a high-performance control processor within the I/A Series distributed control system (DCS). This module is engineered to perform high-speed regulatory, logic, and algebraic control functions, ensuring process stability in mission-critical applications. It acts as the primary computational engine for station-level control, managing the flow of data between field I/O subsystems and the broader plant production network. Its robust design is tailored for demanding environments, including power generation, petrochemical processing, and oil and gas refining.Features
High-speed deterministic execution for complex control algorithms.
Supports dual-redundant configurations for seamless failover and high system availability.
Integrated diagnostic routines for real-time monitoring of memory, processor health, and communication ports.
High-speed connectivity options, including Ethernet and fiber optic interfaces for Mesh network integration.
Optimized for continuous operation in harsh industrial conditions.
ApplicationsThe CP60 is designed for large-scale industrial automation tasks where reliability and real-time responsiveness are paramount. It is commonly deployed in distributed control architectures to manage high-speed communication loops, large database operations, and critical safety-related control sequences.Technical Specifications
Model
CP60 (P0961FR)
Brand
Foxboro (Schneider Electric)
Module Type
Control Processor
Processor Frequency
200 MHz
Memory
128 MB SDRAM / 32 MB Flash
Communication
100 Mbps Ethernet / Fiber Optic Mesh
Power Consumption
15 W (typical)
Operating Temperature
0 to 60 deg C
Operating Humidity
5 to 95 percent RH (non-condensing)
Installation Guidelines
Ensure the control system is powered down before installing or removing the CP60 module from the rack.
Handle the module using proper ESD (Electrostatic Discharge) mitigation practices to prevent internal component damage.
Verify that the module is fully seated in the backplane to ensure reliable communication with the I/O bus.
Maintain adequate airflow within the cabinet to ensure the unit remains within the specified 0 to 60 deg C operating range.
Use shielded cabling for all network interfaces to minimize electromagnetic interference (EMI) in high-noise environments.
FAQDoes the CP60 support redundancy?Yes, the CP60 is designed to support dual-redundant configurations, allowing for a secondary unit to take over control automatically if a fault occurs in the primary processor.What is the primary communication interface for this module?The CP60 utilizes a 100 Mbps Ethernet connection and supports fiber optic interfaces for integration into the Foxboro Mesh network.
10 in stock
Delivery within 48 hours, pay afterwards
Mid weeks Monday to friday we offer next day delivery if the product is on stock and exceptions on holidays.
Weekends We offer no deliveries in the weekends.
International Depending on where you’re located, we offer next day delivery. Check your status on this link
DescriptionThe Foxboro FBMSVH is a robust Control Processor Card engineered for the I/A Series distributed control system (DCS). This module serves as a primary computational engine, managing complex regulatory control loops, sequential logic, and real-time data processing for industrial automation environments. Built for high-availability applications, the FBMSVH is designed to maintain process stability in demanding sectors such as power generation, chemical processing, and large-scale manufacturing, ensuring deterministic execution and system reliability.Features
High-performance RISC-based processor architecture for rapid, low-latency control execution.
Integrated ECC memory to protect against data integrity issues in high-EMI industrial environments.
Support for redundant configurations, enabling bumpless failover between primary and tracker modules.
Continuous onboard diagnostic monitoring for proactive hardware and communication status reporting.
Seamless integration with Foxboro I/A Series control networks and Fieldbus modules.
ApplicationsThe FBMSVH is optimized for mission-critical control tasks where uptime and process precision are paramount. It is widely utilized in continuous process control, batch processing, and safety-related monitoring within distributed control architectures.Technical Specifications
Brand
Foxboro (Invensys / Schneider Electric)
Model
FBMSVH
Series
I/A Series
Processor
High-speed RISC
Power Consumption
12 W (Typical)
Operating Temperature
0 to 60 deg C
Storage Temperature
-40 to 85 deg C
Humidity
5 to 95 percent (Non-condensing)
Weight
0.32 kg
Installation Guidelines
Ensure the control system is powered down before inserting or removing the FBMSVH module from the chassis.
Handle the card using proper ESD (Electrostatic Discharge) mitigation practices to protect sensitive onboard components.
Verify that the module is fully seated in the designated I/A Series rack slot to ensure reliable connection with the backplane.
Maintain adequate ventilation around the chassis to keep the ambient temperature within the specified 0 to 60 deg C operating range.
Route communication cables away from high-voltage power lines to minimize electromagnetic interference.
FAQIs the FBMSVH compatible with redundant configurations?Yes, the FBMSVH supports redundant pairing, allowing a primary and a tracker module to work in tandem for instantaneous, bumpless failover.What type of memory does this processor use?The module utilizes onboard Flash and ECC (Error Correcting Code) RAM to ensure high reliability and data integrity during operation.
10 in stock
Delivery within 48 hours, pay afterwards
Mid weeks Monday to friday we offer next day delivery if the product is on stock and exceptions on holidays.
Weekends We offer no deliveries in the weekends.
International Depending on where you’re located, we offer next day delivery. Check your status on this link
4 in stock
Delivery within 48 hours, pay afterwards
Mid weeks Monday to friday we offer next day delivery if the product is on stock and exceptions on holidays.
Weekends We offer no deliveries in the weekends.
International Depending on where you’re located, we offer next day delivery. Check your status on this link
DescriptionThe Foxboro ZCP270 is a robust, high-performance control processor engineered for the I/A Series Distributed Control System (DCS). This module serves as a critical component in large-scale industrial control environments, including power generation, petrochemical processing, and mining operations. By utilizing dedicated hardware for communication and control, the ZCP270 delivers real-time deterministic performance, enabling it to manage high-density I/O and complex control algorithms while maintaining minimal latency.System Architecture and RedundancyDesigned for mission-critical reliability, the ZCP270 supports both standalone and fully redundant configurations. In redundant setups, the processors function in a primary/tracker arrangement, maintaining continuous database synchronization. This architecture enables seamless, bumpless failover, ensuring that control loops remain active and stable even if a hardware fault occurs. The processor operates without internal fans or moving parts, significantly improving the Mean Time Between Failures (MTBF) and reducing maintenance requirements.Features
High-speed RISC processor for complex control logic execution.
Support for up to 10,000 software blocks (application-dependent).
Integrated 100 Mbps Ethernet-based interface for The Mesh network.
Fanless design for enhanced reliability in industrial environments.
Real-time operating system for deterministic process control.
Supports redundancy for high-availability system architectures.
Technical Specifications
Brand
Foxboro (Invensys / Schneider Electric)
Model
ZCP270
Series
I/A Series
Module Type
Control Processor
Processor Type
High-speed RISC
Memory
128 MB SDRAM, 128 MB Flash
Network Interface
100 Mbps The Mesh (Ethernet)
Input Voltage
24 VDC (Nominal)
Power Consumption
8.5 W
Operating Temperature
0 to 60 deg C
Vibration Resistance
5 to 500 Hz
Installation Guidelines
Ensure the control cabinet is clean and dry; the ZCP270 is designed for standard industrial panel mounting.
Always power down the system before inserting or removing the processor module to prevent electrical damage.
Verify that the 24 VDC power supply is stable and within the specified nominal operating range.
Maintain proper ventilation within the cabinet to stay within the 0 to 60 deg C operating temperature range.
Use shielded cabling for network connections to minimize EMI/RFI interference in high-noise industrial environments.
Follow standard ESD (Electrostatic Discharge) procedures when handling the module to protect sensitive internal components.
FAQIs the ZCP270 compatible with redundant systems? Yes, the ZCP270 is specifically designed to support redundant configurations, allowing for a primary/tracker setup that ensures bumpless failover.What is the primary network interface for this processor? The ZCP270 connects to the Foxboro The Mesh network via a 100 Mbps Ethernet-based interface.Does this module require active cooling? No, the ZCP270 is designed without internal fans or moving parts, relying on passive cooling within the cabinet environment.
4 in stock
Delivery within 48 hours, pay afterwards
Mid weeks Monday to friday we offer next day delivery if the product is on stock and exceptions on holidays.
Weekends We offer no deliveries in the weekends.
International Depending on where you’re located, we offer next day delivery. Check your status on this link
10 in stock
Delivery within 48 hours, pay afterwards
Mid weeks Monday to friday we offer next day delivery if the product is on stock and exceptions on holidays.
Weekends We offer no deliveries in the weekends.
International Depending on where you’re located, we offer next day delivery. Check your status on this link
DescriptionThe Foxboro FEM100 (P0973CA) is a specialized Fieldbus Expansion Module engineered to extend the communication range and capacity of the Foxboro I/A Series Distributed Control System (DCS). By acting as a signal repeater and buffer, this module enables the connection of additional Fieldbus Modules (FBMs) across extended baseplate configurations. It is essential for large-scale industrial environments, such as power plants and chemical processing facilities, where maintaining high I/O density and deterministic communication over distance is critical to operational efficiency.Features
Deterministic Communication: Supports standard 2 Mbps Fieldbus data rates, ensuring real-time signal integrity across expanded segments.
Redundancy Support: Designed for dual-path (Path A and Path B) redundant configurations to maintain network availability in the event of a single-path failure.
Signal Regeneration: Actively buffers and repeats signals to mitigate attenuation and loading issues common in extended serial communication loops.
Fault Isolation: Provides electrical isolation between baseplate segments to prevent local fault propagation, enhancing overall system stability.
Seamless Integration: Designed for direct installation into standard Foxboro I/A Series mounting structures with no complex software configuration required.
ApplicationsThis module is typically deployed in I/A Series DCS architectures requiring expansion beyond standard baseplate limitations. It is frequently utilized in high-availability, large-scale automation projects where reliability, redundancy, and scalability are primary design requirements.Technical Specifications
Model
FEM100 (P0973CA)
Brand
Foxboro (Schneider Electric)
Module Type
Fieldbus Expansion / Repeater
Communication Rate
2 Mbps
Redundancy
Dual-Redundant Fieldbus Paths
Power Consumption
2.8 Watts (Max)
Operating Temperature
0 to 60 deg C
Storage Temperature
-40 to +70 deg C
Relative Humidity
5 to 95% (non-condensing)
Installation Guidelines
Power-Down: Always remove power from the baseplate before installing or removing the FEM100 module to prevent electrical damage or bus disruption.
ESD Handling: Use proper electrostatic discharge (ESD) protection, including grounded wrist straps, when handling the module to protect sensitive internal components.
Mounting: Ensure the module is fully seated into the designated baseplate slot and that all locking mechanisms are engaged to maintain a secure connection.
Cable Routing: Keep communication cables away from high-voltage lines and sources of electromagnetic interference (EMI) to ensure signal clarity.
Environment: Verify that the installation location meets the specified temperature and humidity ranges to ensure long-term reliability.
Compliance and CertificationsThe FEM100 (P0973CA) meets standard industrial requirements, including CE and CSA certifications, and holds FM Approval for use in Class 1, Division 2 hazardous locations.FAQDoes this module require software configuration? No, the FEM100 is designed for transparent operation and does not require complex software addressing to function as a repeater.Can the FEM100 be used in a non-redundant system? Yes, while it supports dual-redundant paths, it can be utilized in single-path configurations as required by your specific system architecture.
10 in stock
Delivery within 48 hours, pay afterwards
Mid weeks Monday to friday we offer next day delivery if the product is on stock and exceptions on holidays.
Weekends We offer no deliveries in the weekends.
International Depending on where you’re located, we offer next day delivery. Check your status on this link
6 in stock
Delivery within 48 hours, pay afterwards
Mid weeks Monday to friday we offer next day delivery if the product is on stock and exceptions on holidays.
Weekends We offer no deliveries in the weekends.
International Depending on where you’re located, we offer next day delivery. Check your status on this link
Description
The Invensys Triconex 4000103-510 is a specialized 10-foot (3.05 meter) Quick Disconnect (QD) cable assembly engineered for robust signal transmission within high-integrity safety systems. Designed to serve as a reliable interface between field instrumentation and the control rack, this assembly supports the stringent requirements of Safety Instrumented Systems (SIS). It provides consistent signal integrity in demanding industrial environments, such as petrochemical facilities and power plants, where vibration and electromagnetic noise are prevalent.
Features
Quick Disconnect Interface: Facilitates rapid installation and maintenance, allowing for efficient instrument replacement without the need for specialized tools.
High-Integrity Shielding: Multi-layer shielding protects against electromagnetic interference (EMI) and signal attenuation, ensuring precise data transmission for critical safety loops.
Industrial-Grade Build: Constructed with a chemical-resistant outer jacket to withstand moisture, abrasion, and harsh atmospheric conditions.
TMR Compatibility: Optimized for use with Triconex Triple Modular Redundant (TMR) architectures to maintain system reliability.
Applications
This cable assembly is intended for use in mission-critical safety applications, including:
Safety Instrumented Systems (SIS) field wiring.
Interconnection of field-mounted sensors and switches to junction boxes.
High-vibration industrial monitoring environments.
Hazardous area instrumentation loops.
Technical Specifications
Model
4000103-510
Length
10 ft (3.05 m)
Connector Type
Industrial Quick Disconnect (QD)
Jacket Material
Industrial-grade PVC/PUR
Operating Temperature
-25 to 80 deg C
Storage Temperature
-40 to 85 deg C
Protection Class
IP67 (when mated)
Installation Guidelines
Ensure the connection point is clean and free of debris before mating the QD connectors to maintain the IP67 seal.
Route cables away from high-voltage power lines or variable frequency drive (VFD) cabling to minimize potential EMI.
Secure the cable with appropriate strain relief to prevent mechanical stress on the connector pins during operation.
Verify that the cable length is sufficient to allow for a drip loop if installed in outdoor or washdown environments.
Always power down the associated I/O modules before connecting or disconnecting field wiring to prevent electrical arcing.
FAQ
Is this cable compatible with all Triconex systems?The 4000103-510 is designed for use within the Invensys Triconex safety system family. Please verify your specific module's pinout and connector requirements against your system documentation before installation.
What is the purpose of the QD interface?The Quick Disconnect interface is designed to reduce downtime during maintenance cycles by allowing field technicians to swap instruments quickly without performing manual terminal block wiring.
6 in stock
Delivery within 48 hours, pay afterwards
Mid weeks Monday to friday we offer next day delivery if the product is on stock and exceptions on holidays.
Weekends We offer no deliveries in the weekends.
International Depending on where you’re located, we offer next day delivery. Check your status on this link
