Sensors and probes provide accurate monitoring for industrial equipment. Our range covers vibration, proximity, and displacement probes from leading manufacturers. We deliver both current and discontinued models with trusted global support.
Sensors & Probes
-
Bently Nevada Bently Nevada 21000-16-10-15-088-03-02 Proximity Probe Housing Assembly
Bently Nevada 21000-16-10-15-088-03-02 Proximity Probe Housing Assembly Configured for eddy-current probe mounting in Bently Nevada 3300 XL systems, the Bently Nevada 21000-16-10-15-088-03-02 (base model 21000-16) provides direct mechanical support and environmental protection for 8 mm proximity probes used in rotor vibration monitoring circuits. Suffix Breakdown & Model Matrix Suffix Definition 21000-16 Aluminum body with 304 stainless steel penetration sleeve 10 Configured for 3300 XL 8 mm proximity probe 15 Supports 1.5 m probe cable length 088 Includes 8.8-inch standoff adapter 03 Fitted with 3/4-14 NPT plugs and cable seal grip 02 Mounting thread: 3/4-14 NPT Hardware Specifications Parameter Specification Model Brand Bently Nevada Origin USA Weight Approx. 0.85 kg Dimensions Body OD 36 mm x Overall Length 285 mm Operating Temp -40 to 120 degC Power Consumption Passive mechanical assembly; no electrical power required Core Function Mechanical housing for proximity probe installation in TSI loops Eddy-Current Probe Scaling and Gap Voltage Validation The assembly maintains precise probe positioning to ensure correct eddy-current scaling factors for target material calibration. Mechanical rigidity preserves probe-to-target clearance within tolerance to maintain -10 VDC gap voltage targets. This supports accurate rotor displacement measurements without cross-talk interference in multi-probe arrays. Frequently Asked Questions Q: Can this housing be used with non-Bently Nevada probes? A: Compatibility is limited to probes matching the mechanical interface and thread specification of the 3300 XL 8 mm series; other probes may require custom adapters. Q: Is hot-swapping supported for probes installed in this housing? A: No. The probe must be removed and reinstalled offline to prevent damage to the probe tip and to maintain calibrated gap settings. Q: What torque is recommended for mounting into a threaded machine port? A: Engage at least 5 full threads of the 3/4-14 NPT fitting and tighten to standard pipe thread torque values; apply thread sealant compatible with industrial oils and coolants. Field Installation Guidelines Mount the housing directly into the prepared NPT port on the machinery casing. Ensure the standoff adapter positions the probe tip at the specified target distance. Route the probe cable through the seal grip to maintain ingress protection. Ground the cable shield to the machine frame at a single point to avoid ground loops. Verify gap voltage after installation before returning the machine to service.
$200.00 $100.00
-
Bently Nevada Bently Nevada 330101-00-12-10-02-00 3300 XL 8 mm Proximity Probe
Bently Nevada 330101-00-12-10-02-00 3300 XL 8 mm Proximity Probe The Bently Nevada 330101-00-12-10-02-00, also cataloged as the 330101 eddy-current proximity probe, operates as a dedicated hardware component for radial/axial shaft displacement and vibration measurement within Bently Nevada 3300 XL Transducer System networks. Hardware Specifications Parameter Specification Model Brand Bently Nevada Origin USA Weight 0.1 kg Dimensions 123 x 1.5 x 2 cm Operating Temp -35 degC to +177 degC Power Consumption Passive sensor, driven by 3300 XL driver Thread Type 3/8-24 UNF Unthreaded Length 0.0 in Case (Probe) Length 1.2 in Total Length 1.0 m (3.3 ft) Connector Type Miniature coaxial ClickLoc connector, standard cable Armor Without armor Gap Voltage Validation and Eddy-Current Probe Scaling The probe must be paired with a matched 3300 XL extension cable and driver (proximitor) to maintain factory-calibrated eddy-current scaling of 200 mV/mil (7.87 mV/um). Gap voltage at the target setpoint is nominally -10 VDC; deviation indicates improper probe-to-shaft clearance or mismatched system components. Cross-talk between adjacent probes is suppressed by maintaining minimum center-to-center spacing per Bently Nevada installation guidelines and verifying shielded cable integrity. Frequently Asked Questions Q: Can this 1.2 in case length probe replace a 330101 with 1.0 in case length in the same mounting hole? A: Yes, provided the machined bore depth accommodates the additional 0.2 in case length. Verify that the unthreaded length option (0.0 in) matches the application requirement to avoid probe tip bottoming out on the shaft. Q: Is the probe polarity-sensitive when connecting to the driver module? A: No. The miniature coaxial ClickLoc connector enforces correct pinout. Mating must be done with the 3300 XL driver module only to preserve calibrated scaling. Q: Does the absence of armor affect EMI performance? A: Unarmored standard cable relies on proper shield termination at one end (driver side). Route separately from power and switching circuits to maintain signal-to-noise ratio. Field Installation Guidelines Mount the probe perpendicular to the conductive target surface. Engage a minimum of 5 full threads of the 3/8-24 UNF fitting into the machine housing. Terminate the coaxial shield drain wire at the driver module end only—leave the probe-end shield floating—to prevent ground loops. Measure gap voltage after final tightening and confirm it falls near -10 VDC before placing machinery in service. Do not exceed the specified minimum bend radius of 25 mm for the coaxial cable.
$200.00 $100.00
-
Bently Nevada Bently Nevada 330101-00-10-10-02-CN 3300 XL 8 mm Proximity Probe
Bently Nevada 330101-00-10-10-02-CN 3300 XL 8 mm Proximity Probe Configured for shaft vibration measurement in Bently Nevada 3300 XL series machinery protection systems, the Bently Nevada 330101-00-10-10-02-CN (330101 proximity probe) provides direct physical displacement detection via eddy-current sensing for continuous rotor position monitoring. Hardware Specifications Parameter Specification Model Brand Bently Nevada Origin USA Weight 0.1 kg Dimensions 104 x 1.5 x 1.2 cm Operating Temp -35 degC to +177 degC Power Consumption Passive sensor, no external power Thread Type 3/8-24 UNF Unthreaded Length 0.0 in Case Length 1.0 in Total Length 1.0 m (3.3 ft) Connector Type Miniature coaxial ClickLoc connector Eddy-Current Probe Scaling and Gap Voltage Validation The 330101 probe utilizes a calibrated eddy-current field to translate target displacement into proportional voltage output. Gap voltage validation targets -10 VDC at nominal probe-to-target spacing to ensure linear response across the defined measuring range. Signal scaling is matched to the 3300 XL extension cable and driver module to maintain system-level accuracy. Cross-talk suppression is achieved through precise shielding and impedance matching within the probe assembly. Frequently Asked Questions Q: Can the 330101 probe be used with non-Bently Nevada driver modules? A: No. Eddy-current probe scaling is specific to the 3300 XL driver module; mismatched drivers will cause inaccurate displacement readings. Q: What is the minimum bending radius for the standard cable? A: Maintain a minimum bend radius of 25 mm to prevent coaxial conductor deformation and signal loss. Q: Does the probe require recalibration after installation? A: Recalibration is not required if installed within specified gap voltage and temperature limits, but verification against baseline gap voltage is recommended. Field Installation Guidelines Install the probe with its tip perpendicular to the target surface to avoid angular error in displacement readings. Secure the probe body using proper thread engagement (minimum 5 full threads). Ground the shield of the coaxial cable at the driver module end only to prevent ground loops. Route the probe cable away from high-voltage conductors and switching devices to minimize electromagnetic interference. Verify gap voltage immediately after mechanical installation using the driver module’s test points.
$200.00 $100.00
-
Bently Nevada Bently Nevada 330101-00-08-05-02-00 3300 XL 8 mm Proximity Probe
Bently Nevada 330101-00-08-05-02-00 3300 XL 8 mm Proximity Probe Configured for shaft radial vibration measurement in Bently Nevada 3300 XL Transducer System networks, the Bently Nevada 330101-00-08-05-02-00 (3300 XL 8 mm) provides direct physical displacement transduction via eddy-current sensing into conditioned voltage output. Hardware Specifications Parameter Specification Brand Bently Nevada Model 330101-00-08-05-02-00 Origin USA Weight 0.04 kg Dimensions 1.5 x 1.2 x 58 cm Operating Temp -35 degC to +177 degC Power Consumption Supplied by system driver; no local power required Probe Tip Diameter 8 mm Thread Type 3/8-24 UNF Total Cable Length 0.5 m (1.6 ft) Connector Type Miniature coaxial ClickLoc connector, standard cable Armor Option Without armor Eddy-Current Probe Scaling & Gap Voltage Validation The probe operates on eddy-current scaling principles where target material conductivity and permeability directly influence output slope. Calibration is fixed at factory-set sensitivity of 7.87 mV/μm (200 mV/mil). Gap voltage validation targets -10 VDC when installed against a standard steel target at nominal probe gap. Cross-talk suppression is achieved through precise shielding termination and separation from unrelated signal conductors. Frequently Asked Questions Q: Can the 330101-00-08-05-02-00 be used with non-steel targets? A: Yes, but scaling factors will change; re-calibration is required to maintain accuracy. Q: Is hot-swapping supported during machinery operation? A: No. Always de-energize the transducer system before replacing probes to prevent transient signal errors. Q: What is the minimum bending radius for the standard cable? A: Maintain a bend radius of no less than 25 mm to avoid coaxial impedance changes. Field Installation Guidelines Install probe tip perpendicular to the conductive target surface with 0.0 in unthreaded length engaged fully into the mounting bracket. Torque to 3.4 N·m (30 in-lb) maximum. Ground the shield at the system driver end only. Route the probe cable separately from power conductors to prevent inductive interference. Verify gap voltage after installation using the driver monitor output.
$200.00 $100.00
-
Bently Nevada Bently Nevada 21000-16-10-00-144-03-02 Proximity Probe Housing Assembly
Bently Nevada 21000-16-10-00-144-03-02 Proximity Probe Housing Assembly The Bently Nevada 21000-16-10-00-144-03-02, also cataloged as the 21000 Series Proximity Probe Housing Assembly, functions as a mechanical interface component for eddy-current probe installation and positional alignment within Turbine Supervisory Instrumentation (TSI) systems. Hardware Specifications Parameter Specification Model Brand Bently Nevada Origin USA Weight Approx. 0.25 kg Dimensions 63.5 mm Height × 38.1 mm Diameter Operating Temp -40 degC to +120 degC Power Consumption Passive mechanical assembly Eddy-Current Probe Scaling and Gap Voltage Validation This housing supports precise eddy-current probe scaling by maintaining fixed probe extension lengths relative to the machined face. Installation requires verification of gap voltage targets near -10 VDC when interfaced with Bently Nevada proximity probe drivers. Correct scaling prevents cross-talk suppression loss between adjacent transducer channels in rotor dynamics monitoring arrays. Frequently Asked Questions Q: Can this housing be used with non-Bently Nevada probes? A: Physical mounting may allow fitment; however, gap voltage validation and scaling accuracy cannot be guaranteed outside supported models. Q: Does the assembly support hot-swap replacement in live machinery? A: Mechanical removal is possible without system shutdown, but electrical disconnection of the probe cable is required before withdrawal to avoid signal transients. Q: What thread engagement is required for stable mounting? A: Minimum 5 full NPT thread turns are required to maintain vibration isolation under high-G radial loads. Field Installation Guidelines Mount the assembly directly to the machine casing using manufacturer-specified threads. Ensure probe tip clearance matches the pre-defined gap voltage range prior to final tightening. Use shielded twisted-pair cabling routed away from power conductors to reduce electromagnetic interference. Verify probe orientation to prevent mechanical contact with rotating components during operational transients.
$200.00 $100.00
-
Bently Nevada Bently Nevada 21000-16-10-00-124-03-02 Proximity Probe Housing Assemblies
Bently Nevada 21000-16-10-00-124-03-02 Proximity Probe Housing Assemblies Configured for eddy-current probe mounting and mechanical runout measurement in Bently Nevada 3300 XL Transducer Systems, the Bently Nevada 21000-16-10-00-124-03-02 (21000 Series Proximity Probe Housing Assembly) provides direct physical interface execution for shaft vibration monitoring. Hardware Specifications Parameter Specification Model Brand Bently Nevada Origin USA Weight 2 kg Dimensions N/A (Housing assembly per model suffix) Operating Temp -35 degC to +85 degC Power Consumption Passive device, no power consumption Probe Type 3300 XL 8 mm probe with connector Probe Cable Length 1.0 m (39 in) Probe Penetration 12.4 in Fittings One 3/4-14 NPT plug; one 3/4-14 to 1/2-14 NPT reducer; one cable seal grip with grommets for cable sizes 1/8 to 3/8 in Mounting Thread 3/4-14 NPT Material Aluminum body with 304 stainless steel sleeve Eddy-Current Probe Scaling and Gap Voltage Validation The assembly supports calibrated eddy-current probe scaling per API 670 for radial vibration and thrust position measurements. Gap voltage validation targets -10 VDC for optimal linear range. Mechanical installation must ensure rotor dynamics compatibility without inducing probe-to-shaft contact during transient speed events. Cross-talk suppression is achieved through proper shield termination at the housing gland. Frequently Asked Questions Q: Does this housing support hot swapping of the proximity probe? A: No. Removal or replacement requires system shutdown and re-validation of gap voltage. Q: What is the minimum thread engagement for NPT mounting? A: A minimum of 5 full threads is required for pressure-tight installation. Q: Is probe penetration adjustable after installation? A: No. Penetration length is fixed by the machined housing dimensions specified in the model suffix. Field Installation Guidelines Install housing with proper torque on NPT threads using PTFE tape or anaerobic thread sealant compatible with aluminum. Terminate probe cable shield directly to housing ground lug to prevent ground loops. Verify probe tip clearance before final tightening. Ensure cable seal grip grommet matches installed cable diameter to maintain ingress protection.
$200.00 $100.00
-
Bently Nevada Bently Nevada 21000-16-10-00-077-03-02 Proximity Probe Housing Assembly
Bently Nevada 21000-16-10-00-077-03-02 Proximity Probe Housing Assembly Configured for eddy-current proximity probe mounting and alignment in Bently Nevada 3300 XL Transducer Systems, the Bently Nevada 21000-16-10-00-077-03-02 (21000 Proximity Probe Housing Assembly) provides direct physical retention and environmental sealing for shaft vibration sensing elements. Suffix Breakdown & Model Matrix Position Code Description 1-2 16 3300 XL 8 mm eddy-current proximity probe 3-4 10 Probe cable length 1.0 m (39 in) 5-6 00 No standoff adapter 7-9 077 Probe penetration 7.7 in (195.58 mm) 10-11 03 3/4-14 NPT plug, reducer to 1/2-14 NPT, cable seal grip with grommets for 1/8–3/8 in OD cables 12-13 02 Mounting thread 3/4-14 NPT Hardware Specifications Parameter Specification Model Brand Bently Nevada Origin USA Weight 1.05 kg Dimensions 30.5 x 8.5 x 8.5 cm Operating Temp -40 to 85 degC Power Consumption Passive — none required Material Aluminum Mounting Thread 3/4-14 NPT Probe Compatibility 3300 XL 8 mm Eddy-Current Proximity Probe, 1.0 m cable Probe Penetration 7.7 in (195.58 mm) Cable Gland Range 1/8 to 3/8 inches OD Gap Voltage Validation and Cross-Talk Suppression The housing positions the 3300 XL 8 mm probe at a fixed standoff to achieve nominal gap voltage of -10 VDC for linear eddy-current transducer scaling. Mechanical rigidity minimizes cross-talk suppression issues in multi-sensor rotor dynamics applications by isolating probe bodies from adjacent vibrating structures and reducing capacitive coupling along shared cable runs. Frequently Asked Questions Q: Is the 3300 XL probe included with this housing assembly? A: The assembly is configured for a 3300 XL 8 mm probe with 1.0 m cable; verify whether the probe is supplied separately per your purchase configuration — the housing itself does not include the electronic driver. Q: Can the probe be replaced while the machine is running? A: No. The system must be de-energized and the transducer loop disconnected before probe removal to prevent false trip signals and damage to the conditioning module. Q: Does the absence of a standoff adapter (suffix 00) affect probe calibration? A: Yes. Probe-to-target clearance must be verified with the actual standoff hardware installed in the final assembly; no additional adapter means the probe tip position is set solely by the housing barrel depth. Field Installation Guidelines Thread the housing into a rigid 3/4-14 NPT boss on the machinery case with minimum 5 full thread engagement and appropriate PTFE or pipe-thread sealant. Insert the 3300 XL probe, set tip clearance with calibrated feeler gauges, then tighten the probe set screw. Ground the probe cable shield at one point only — preferably at the system termination — to avoid ground loops. Route the cable away from high-current power conductors and maintain the minimum bend radius specified by Bently Nevada probe documentation.
$200.00 $100.00
-
Bently Nevada Bently Nevada 21000-16-05-15-098-03-02 Proximity Probe Housing Assembly
Bently Nevada 21000-16-05-15-098-03-02 Proximity Probe Housing Assembly The Bently Nevada 21000-16-05-15-098-03-02, also cataloged as the 21000 Proximity Probe Housing Assembly, serves as a dedicated mechanical interface for eddy-current proximity probe installation and alignment within Bently Nevada 3300 XL Transducer Systems. It provides direct physical support and environmental sealing for precision shaft vibration measurement circuits. Hardware Specifications Parameter Specification Model Brand Bently Nevada Origin USA Weight 1.08 kg Dimensions 8.5 x 8.5 x 30.5 cm Operating Temp -40 to 85 degC Power Consumption Passive component, no power required Mounting Thread 3/4-14 NPT Cable Gland Range 1/8 to 3/8 inches OD Probe Compatibility 3300 XL 8 mm Eddy-Current Proximity Probe Eddy-Current Probe Scaling and Gap Voltage Validation This housing assembly supports precise eddy-current probe scaling by maintaining fixed probe standoff distances relative to the target surface. Gap voltage validation targets -10 VDC at nominal clearance, ensuring linear transducer response for rotor dynamics monitoring. Cross-talk suppression is achieved via rigid mechanical isolation from adjacent sensor assemblies, minimizing electromagnetic interference in densely instrumented machinery trains. Frequently Asked Questions Q: Can this housing be installed without removing the proximity probe? A: No. The probe must be inserted into the housing prior to final mounting to ensure correct axial positioning and avoid damage to the probe tip. Q: Is hot-swapping supported for the probe within this assembly? A: No. System shutdown is required before removal or replacement to prevent erroneous transient signals and potential damage to the conditioning electronics. Q: What torque specification applies to the NPT thread engagement? A: Use standard NPT pipe thread engagement of at least 5 full threads with appropriate thread sealant; torque values should follow ASME B1.20.1 guidelines for 3/4-14 NPT steel fittings. Field Installation Guidelines Mount the assembly directly to a rigid machine structure using the 3/4-14 NPT threaded boss. Apply compatible anti-seize compound if stainless-to-stainless threading is used. Ensure the probe cable shield is grounded at the termination point only, avoiding ground loops. Maintain minimum bend radius of the probe cable to prevent signal attenuation. Verify probe standoff distance with calibrated feeler gauges before final tightening.
$200.00 $100.00
-
Bently Nevada Bently Nevada 21000-16-05-00-094-03-02 Proximity Probe Housing Assembly
Bently Nevada 21000-16-05-00-094-03-02 Proximity Probe Housing Assembly Configured for external installation and mechanical positioning of eddy current proximity probe sensing elements in rotating machinery monitoring systems, the Bently Nevada 21000-16-05-00-094-03-02 (21000 Proximity Probe Housing Assembly) provides direct mechanical routing and sealed environmental isolation for probe insertion and adjustment within TSI measurement chains. Suffix Breakdown & Model Matrix Suffix Code Option Name Configuration Details 21000 Base Model Aluminum housing body with 304 stainless steel probe sleeve -16 Probe Option 3300 XL 8 mm proximity probe with standard connector interface -05 Cable Length 0.5 m probe cable (approx. 20 inches) -00 Standoff Adapter No standoff adapter included -094 Probe Penetration 9.4 inches probe sleeve insertion depth -03 Fitting Option 3/4-14 NPT plug, 3/4-14 to 1/2-14 reducer, cable seal grip assembly -02 Mounting Thread 3/4-14 NPT mounting interface Hardware Specifications Parameter Specification ModelBrand Bently Nevada 21000-16-05-00-094-03-02 Origin USA Weight approx. 1.1 kg Dimensions Not specified OperatingTemp -51 degC to +177 degC (probe rated) PowerConsumption Passive (no external power required) Material Aluminum housing, 304 stainless steel sleeve Mounting Thread 3/4-14 NPT Probe Type 3300 XL 8 mm proximity probe Penetration Depth 9.4 in Eddy-Current Probe Scaling and Signal Integrity Control Bently Nevada 21000 housing assemblies implement a mechanically fixed probe positioning reference for eddy current displacement measurement chains. The probe-to-target gap is maintained through calibrated sleeve insertion depth, supporting standardized gap voltage validation behavior within typical -10 VDC to 0 VDC linear operating range of proximity transducer systems. Cross-talk suppression is achieved through controlled probe routing geometry and grounded metallic housing continuity. Cable shielding termination within the sealed gland assembly reduces electromagnetic coupling between adjacent probe channels in multi-probe installations on shared machine casings. Eddy current scaling consistency is maintained by fixed mechanical penetration depth, ensuring repeatable sensitivity coefficients across replacement probes within identical mounting geometries. Frequently Asked Questions Q: Can the probe assembly be replaced without removing the housing from the machine case?A: The design supports external probe insertion and withdrawal through the probe sleeve. Mechanical retention remains via threaded mounting interface; housing removal is not required for probe exchange. Q: Does probe cable length (-05 option) affect signal calibration?A: The 0.5 m cable is electrically matched for standard 3300 XL probe interface impedance. No field recalibration is required provided connector integrity is maintained. Q: Is electrical isolation required between housing and machine ground?A: The housing is mechanically grounded through NPT mounting. Signal reference grounding is handled at the monitoring system interface, not at the housing body. Field Installation Guidelines The 3/4-14 NPT mounting interface shall be installed with standard thread engagement depth (minimum 5 full turns recommended for sealing integrity). Use PTFE-based sealing compound compatible with industrial vibration environments. Probe sleeve insertion must maintain axial alignment to prevent mechanical scraping of probe tip during installation. Cable sealing grommets must be selected according to actual cable diameter range (1/8 to 3/8 in) to maintain ingress protection performance. Shield termination should be executed at system-side instrumentation ground only. Avoid dual grounding paths between housing body and monitoring system to prevent circulating current loops in proximity probe signal return paths.
$200.00 $100.00
-
EMERSON Emerson EZ1900-080 Extension Cable | EZ1000 Series Sensor Accessory
Product Description The Emerson EZ1900-080 is a high-performance extension cable designed for the AMS EZ1000 series sensors and converters. Engineered for precision vibration and displacement monitoring, this cable extends sensor reach across complex machinery layouts while maintaining reliable signal integrity. Constructed from durable FEP (Fluorinated Ethylene Propylene), it resists heat, oil, and industrial contaminants, making it suitable for demanding operational environments. Technical Specifications Feature Specification Model EZ1900-080 Cable Type Extension Cable Armor Non-Armored Cable Material FEP (Fluorinated Ethylene Propylene) Cable Length 8 meters Operating Temperature -35°C to +150°C Connector Type Compatible with EZ1000 series sensors and converters Protection Rating IP66 (when installed correctly) Compatible Systems AMS EZ1000 Series Signal Type Analog or digital (depending on connected sensor) Voltage Rating Up to 300V (typical for EZ1000 systems) Flexibility Flexible for routing in tight machinery spaces Applications The EZ1900-080 is ideal for extending sensor connections in vibration and displacement monitoring setups. It is particularly suited for industrial machinery where long cable runs are necessary, and where exposure to oil, heat, or dust is common. FAQ Q: Can the EZ1900-080 be used outdoors?A: Yes, with IP66-rated installation, it provides robust protection against dust and water ingress. Q: Is the cable shielded against electromagnetic interference?A: While non-armored, the FEP material offers some resistance to industrial interference; for high EMI environments, consider shielded variants. Q: Are other lengths available?A: Emerson EZ1000 series extension cables are available in multiple lengths; check the EZ1900 family for alternatives. Q: Can it connect any sensor type?A: It is specifically designed for AMS EZ1000 series sensors and converters; compatibility with other brands is not guaranteed.
$200.00 $100.00
-
EMERSON Emerson EZ1900-040 Extension Cable | Eddy Current Sensor Accessory
Product Description Overview The Emerson EZ1900-040 is a high-precision extension cable designed to complement non-contact eddy current sensors used in critical turbomachinery monitoring. This accessory supports accurate measurement of shaft displacement, dynamic position, eccentricity, and rotational speed, ensuring reliable performance in demanding industrial environments. Technical Specifications Compatibility: Designed for use with 5mm and 8mm Eddy Current Sensors Performance – 5mm Sensor: Linear Measurement Range: 1mm (40 mils) Initial Air Gap: 0.25mm (10 mils) Incremental Scale Factor (ISF): API Standard: 15.74 V/mm ±5% (399.8 mV/mil) ISO Standard: 16 V/mm ±5% (406.4 mV/mil) Operating Temperature: 0–45°C (32–113°F) Deviation from Best-Fit Straight Line (DSL): ±0.025mm (±1 mil) Performance – 8mm Sensor: Linear Measurement Range: 2mm (80 mils) Initial Air Gap: 0.5mm (20 mils) Incremental Scale Factor (ISF): API Standard: 7.87 V/mm ±5% (199.9 mV/mil) ISO Standard: 8 V/mm ±5% (203.2 mV/mil) Operating Temperature: 0–45°C (32–113°F) Deviation from Best-Fit Straight Line (DSL): ±0.025mm (±1 mil) Target Requirements: Minimum Target Size: 2mm (80 mils) Minimum Shaft Diameter: 5mm Sensor: 20mm (0.79 in) 8mm Sensor: 25mm (0.98 in) Compatible Target Material: Ferromagnetic Steel (e.g., 42CrMo4 / AISI 4140) Physical Specifications: Product Type: Extension Cable Origin: USA Weight: 100g Condition: In Stock Applications Ideal for turbomachinery monitoring, the EZ1900-040 supports high-speed rotating equipment in turbines, compressors, and pumps, providing precise data for maintenance and diagnostic purposes. FAQ Q: Can this cable be used with other sensor brands?A: The EZ1900-040 is optimized for Emerson 5mm and 8mm eddy current sensors. Using it with other brands may impact performance. Q: What is the maximum cable length supported?A: Standard configuration supports up to 10 meters without signal degradation; longer lengths may require signal conditioning. Q: Can this sensor cable operate outside 0–45°C?A: Operation beyond this range is not recommended as it may affect measurement accuracy. Similar Models Comparison EZ1900-041: Supports longer cable lengths and higher temperature ranges. EZ1900-042: Designed for compact sensor installations with limited space.
$200.00 $100.00
-
Bently Nevada Bently Nevada | 330104‑00‑16‑10‑02‑05 | 3300 XL 8 mm Proximity Probe
Overview The Bently Nevada 330104‑00‑16‑10‑02‑05 proximity probe belongs to the 3300 XL 8 mm transducer family and is designed for precise shaft vibration and displacement measurements in rotating machinery. This model includes armored cable protection and a 1.6‑meter probe assembly length, making it suitable for installations exposed to mechanical stress, oil contamination, or elevated temperatures. Key Characteristics Model: 330104‑00‑16‑10‑02‑05 Probe Type: 8 mm proximity probe with armored cable Thread Specification: M10 × 1 Probe Length: 1.6 m Connector: Miniature coaxial ClickLoc System Compatibility: 3300 XL Proximity Transducer System Certifications: CSA, ATEX, IECEx Weight: 0.06 kg Dimensions: 115 × 2 × 1.5 cm Functional Description The 330104‑00‑16‑10‑02‑05 probe uses an eddy‑current sensing coil encapsulated in a molded PPS plastic tip, providing enhanced resistance to oil ingress, moisture, and mechanical wear. The armored cable construction protects the probe from abrasion and crushing forces, making it suitable for harsh industrial environments such as turbine decks, compressor housings, and pump skids. This model is fully compatible with other components in the 3300 XL system, including extension cables and Proximitor sensors. Because the system is factory‑matched, no bench calibration is required when replacing or interchanging components. The probe’s shielding and internal design provide strong immunity to RFI/EMI interference, allowing installation in non‑metallic housings while maintaining CE compliance. Its compact form factor supports both DIN‑rail and panel‑mounted monitoring systems. Technical Specifications Mechanical Parameter Value Probe Tip Diameter 8 mm Thread Type M10 × 1 Probe Length 1.6 m Cable Type Armored coaxial Connector Miniature ClickLoc Weight 0.06 kg Shipping Dimensions 115 × 2 × 1.5 cm Electrical Parameter Value Sensitivity 7.87 V/mm (200 mV/mil) typical Linear Range 2 mm (80 mil) Frequency Response DC to 10 kHz System Compatibility 3300 XL Proximitor sensors Grounding Single‑point shield grounding recommended Environmental Parameter Value Operating Temperature –35°C to +177°C (probe only) Humidity 95% non‑condensing Certifications CSA, ATEX, IECEx RFI/EMI Immunity CE‑compliant without shielded conduit Applications Turbines (steam, gas, hydro) Compressors and expanders Industrial pumps and motors Gearboxes and high‑speed rotating equipment API 670‑compliant vibration protection systems FAQ Q: Does this probe require calibration after installation? A: No. The probe, extension cable, and Proximitor sensor are factory‑matched and do not require bench calibration. Q: Can this probe be used in oil‑rich environments? A: Yes. The armored cable and PPS‑encapsulated tip provide excellent resistance to oil and moisture. Q: Is it interchangeable with other 3300 XL 8 mm probes? A: Yes. All 3300 XL 8 mm probes are designed for full interchangeability within the system.
$200.00 $100.00
-
Bently Nevada Bently Nevada 330103‑00‑05‑10‑02‑05 | 3300 XL Series | 8 mm Proximity Probe
Overview The Bently Nevada 330103‑00‑05‑10‑02‑05 proximity probe is part of the 3300 XL 8 mm transducer system, engineered for precise shaft vibration and position measurement in fluid‑film bearing machinery. Its durable mechanical construction, stable electrical characteristics, and compatibility with global 3300 XL components make it a reliable choice for continuous machinery protection applications. Key Characteristics 8 mm eddy‑current probe for displacement and vibration monitoring M10 × 1 threaded stainless‑steel housing 1.0‑meter integrated coaxial cable Miniature ClickLoc connector for secure, vibration‑resistant connections Gold‑plated connector contacts for corrosion resistance Fully compatible with 3300 XL extension cables and Proximitor sensors Meets CSA, ATEX, and IECEx hazardous‑area certifications Suitable for high‑temperature, high‑vibration industrial environments Technical Specifications Parameter Specification Model / Part Number 330103‑00‑05‑10‑02‑05 Probe Type 3300 XL 8 mm Proximity Probe Thread Size M10 × 1 Cable Length 1.0 m (3.3 ft) Cable Type Unarmored coaxial cable Connector Type Miniature coaxial ClickLoc Measurement Principle Eddy‑current displacement Output Voltage proportional to probe‑target gap Certifications CSA, ATEX, IECEx Weight 0.06 kg Dimensions 1.8 × 1.6 × 123 cm System Compatibility 3300 XL Proximity Transducer System Condition Brand New Origin USA MOQ 1 HS Code 8537101190 Functional Description The 330103‑00‑05‑10‑02‑05 probe is designed to deliver accurate displacement and vibration measurements for rotating machinery. Its M10 × 1 threaded housing supports secure installation, while the ClickLoc connector ensures a reliable electrical interface that resists loosening under vibration. The probe’s sensing element produces a voltage proportional to the distance between the probe tip and the conductive target surface, enabling precise monitoring of: Shaft radial vibration Axial position Thermal growth Keyphasor phase reference Gold‑plated connector contacts enhance corrosion resistance, ensuring long‑term signal integrity. The probe is lightweight and easy to install, making it suitable for both new installations and system upgrades. Application Scenarios Steam and gas turbines Centrifugal compressors Industrial pumps and fans Gearboxes and generators Machinery requiring compact 8 mm probe installation FAQ Q: Does this probe require a specific Proximitor sensor? Yes. It is designed for use with 3300 XL Proximitor sensors for optimal performance. Q: Can this probe be used in hazardous environments? Yes. It meets CSA, ATEX, and IECEx certifications. Q: Is the connector resistant to vibration? The ClickLoc connector includes a locking mechanism that prevents loosening during operation.
$200.00 $100.00
-
Bently Nevada Bently Nevada 330103‑00‑15‑10‑02‑CN | 3300 XL Series | 8 mm Proximity Probe
Overview The Bently Nevada 330103‑00‑15‑10‑02‑CN proximity probe is part of the 3300 XL 8 mm eddy‑current transducer system, engineered for precise shaft vibration and position measurement in fluid‑film bearing machinery. This model is designed to meet regional installation requirements while maintaining full compatibility with the global 3300 XL platform. Its stable electrical characteristics and rugged mechanical design ensure long‑term reliability in demanding industrial environments. Key Characteristics 8 mm eddy‑current probe for displacement and vibration monitoring M10 × 1 threaded stainless‑steel housing Minimum unthreaded length: 0 mm Case length: 140 mm 1.0‑meter integrated coaxial cable with ClickLoc miniature connector Fully compliant with API 670 mechanical and performance requirements Interchangeable with all 3300 XL and legacy 3300 5 mm / 8 mm components Designed for regional (CN) specifications while maintaining global performance standards Technical Specifications Parameter Specification Model / Part Number 330103‑00‑15‑10‑02‑CN Probe Type 3300 XL 8 mm Proximity Probe Thread Size M10 × 1 Minimum Unthreaded Length 0 mm Case Length 140 mm Cable Length 1.0 m Connector Type Miniature coaxial ClickLoc Measurement Principle Eddy‑current displacement Calibration Factory‑set for AISI 4140 steel (other materials optional) Weight 0.06 kg Dimensions 1.8 × 1.6 × 123 cm System Compatibility 3300 XL Proximity Transducer System Condition Brand New Origin USA MOQ 1 HS Code 8537101190 Functional Description The 330103‑00‑15‑10‑02‑CN probe is engineered to deliver accurate displacement and vibration measurements across a wide operating range. As part of the 3300 XL system, it forms a matched transducer assembly with an extension cable and Proximitor sensor, ensuring stable performance without requiring component matching or bench calibration. The probe complies with API 670 requirements for: Mechanical configuration Linear range Sensitivity Temperature stability Its 1.0‑meter cable and compact mechanical dimensions support installation in confined or high‑density machinery layouts. The ClickLoc connector ensures secure electrical contact and reduces the risk of accidental disconnection. This model is suitable for both standard vibration monitoring and overspeed protection applications when paired with the appropriate Proximitor sensor. Application Scenarios Steam and gas turbines Centrifugal compressors Industrial pumps and fans Gearboxes and generators Machinery requiring API 670‑compliant monitoring FAQ Q: What does the “CN” suffix indicate? A: It denotes a configuration tailored for regional installation requirements while maintaining full 3300 XL performance. Q: Is this probe compatible with older 3300 systems? A: Yes. It is fully interchangeable with both XL and non‑XL 3300 5 mm and 8 mm components. Q: Can the probe be calibrated for different shaft materials? A: Yes. Custom calibration is available upon request.
$200.00 $100.00
-
Bently Nevada Bently Nevada 330103‑17‑22‑10‑12‑05 | 3300 XL Series | 8 mm Proximity Probe
Overview The Bently Nevada 330103‑17‑22‑10‑12‑05 proximity probe is an extended‑reach 8 mm sensor designed for high‑accuracy displacement and vibration measurement in fluid‑film bearing machinery. Its long unthreaded and case lengths support installations where the sensing point is located deeper within the machine housing. The probe incorporates a FluidLoc‑protected cable, offering superior resistance to oil ingress in lubrication‑rich environments. Key Characteristics 8 mm eddy‑current probe for shaft vibration and position monitoring M10 × 1 threaded stainless‑steel housing Extended unthreaded length (170 mm) and case length (220 mm) for deep‑reach installations 1.0‑meter FluidLoc cable with miniature coaxial ClickLoc connector Designed for static position, dynamic vibration, and Keyphasor reference measurements Fully interchangeable with 3300 XL and legacy 3300 5 mm / 8 mm components Certified for hazardous locations (CSA, ATEX, IECEx) Suitable for oil‑exposed environments due to FluidLoc cable protection Technical Specifications Parameter Specification Model / Part Number 330103‑17‑22‑10‑12‑05 Probe Type 3300 XL 8 mm Proximity Probe Thread Size M10 × 1 Minimum Unthreaded Length 170 mm Case Length 220 mm Cable Type FluidLoc oil‑resistant cable Cable Length 1.0 m Connector Type Miniature coaxial ClickLoc Measurement Principle Eddy‑current displacement Output Voltage proportional to probe‑target gap Certifications CSA, ATEX, IECEx Interchangeability XL and non‑XL 3300 5 mm / 8 mm systems Weight 1.48 kg Dimensions 28 × 26 × 6 cm System Compatibility 3300 XL Proximity Transducer System Condition Brand New Origin USA MOQ 1 HS Code 8537101190 Functional Description The 330103‑17‑22‑10‑12‑05 probe is engineered for installations requiring extended reach into machine housings, bearing pedestals, or confined structural cavities. Its FluidLoc cable construction prevents oil penetration, ensuring long‑term signal stability in lubrication‑intensive environments such as turbines and compressors. As part of the 3300 XL system, the probe works with matched extension cables and Proximitor sensors to deliver accurate monitoring of: Shaft radial vibration Axial position Thermal expansion Keyphasor phase reference Speed measurement The probe maintains the standard 4‑hole mounting pattern used across the 3300 family, simplifying retrofits and system upgrades. Its hazardous‑area certifications support deployment in oil & gas, power generation, and heavy industrial facilities. Application Scenarios Steam and gas turbines Centrifugal and axial compressors Gearboxes and industrial pumps Machinery requiring deep‑reach probe installation Oil‑rich environments where cable protection is critical FAQ Q: What makes the FluidLoc cable different from standard probe cables? A: FluidLoc provides enhanced resistance to oil penetration, improving long‑term reliability in lubrication‑exposed installations. Q: Can this probe replace older 3300 8 mm probes? A: Yes. It is electrically and mechanically compatible when installed with matched cable lengths. Q: Is this probe suitable for hazardous areas? A: It carries CSA, ATEX, and IECEx certifications for global hazardous‑location compliance.
$200.00 $100.00
-
Bently Nevada Bently Nevada 3300 XL Series 330103-01-06-05-02-05 | 8 mm Proximity Probe
Overview The 330103-01-06-05-02-05 proximity probe is part of Bently Nevada’s 3300 XL 8 mm transducer system, engineered for high‑accuracy shaft position and vibration monitoring. Designed for use in critical rotating machinery, the probe forms one component of a complete measurement chain that includes an extension cable and a Proximitor sensor. Technical Specifications Parameter Value Model Number 330103-01-06-05-02-05 Product Type 8 mm Proximity Probe Series 3300 XL Proximity Transducer System Manufacturer Bently Nevada Condition Brand New Probe Tip Diameter 8 mm Thread Type 3/8‑24 UNF Unthreaded Length 0 mm Case Length 1.3 in Cable Length 1.0 m Connector Type Miniature coaxial ClickLoc Measurement Capability Static position + dynamic vibration Compliance API 670 mechanical and performance requirements Compatibility Fully interchangeable with 3300 XL and non‑XL 5 mm / 8 mm components Dimensions 1.8 × 1.6 × 123 cm Weight 0.06 kg Origin USA HS Code 8537101190 Availability In Stock MOQ 1 Key Features High‑precision eddy‑current sensing for displacement and vibration monitoring. Produces a voltage output proportional to the probe‑to‑target distance. Suitable for fluid‑film bearing machines, Keyphasor reference, and speed measurement. Fully interchangeable components eliminate the need for matched calibration. Complies with API 670 requirements for linearity, accuracy, and temperature stability. Lightweight, compact design supports easy installation in confined spaces. ClickLoc connector ensures secure, vibration‑resistant electrical connections. Application Scenarios Turbine and compressor shaft vibration monitoring Pump and motor displacement measurement Keyphasor phase reference installations Machinery protection systems requiring API‑compliant sensors Retrofit projects using legacy 3300 series mounting patterns FAQ Q: Is this probe compatible with older 3300 series components? A: Yes. The 330103-01-06-05-02-05 is fully interchangeable with non‑XL 5 mm and 8 mm probes and extension cables. Q: Does the probe require matched calibration with its extension cable? A: No. All 3300 XL components are designed for interchangeability without individual calibration. Q: What applications benefit most from this 8 mm probe? A: It is ideal for fluid‑film bearing machinery where both static and dynamic measurements are required.
$200.00 $100.00
-
Bently Nevada Bently Nevada 330101‑00‑40‑10‑02‑05 | 3300 XL Series 8 mm Proximity Probe
Overview The Bently Nevada 330101‑00‑40‑10‑02‑05 is an 8 mm eddy‑current proximity probe engineered for precise non‑contact measurement of shaft vibration and displacement. As part of the 3300 XL Proximity Transducer System, it provides stable linearity, excellent temperature performance, and long‑term reliability for critical rotating machinery. Design and Construction This probe generates a voltage proportional to the distance between the probe tip and a conductive target surface, enabling both static position and dynamic vibration measurements. It is widely used in fluid‑film bearing machines, Keyphasor® reference points, and speed measurement applications. The 330101‑00‑40‑10‑02‑05 supports full interchangeability of the probe, extension cable, and Proximitor® Sensor—no bench calibration or component matching is required. The XL Proximitor Sensor enhances linearity and temperature stability compared to earlier generations and includes an integral isolation base, eliminating the need for separate isolator plates. The probe incorporates Bently Nevada’s patented TipLoc™ bonding method for a reinforced probe tip and CableLoc™ technology providing 330 N (75 lbf) pull strength on the cable. A 3/8‑24 UNF threaded body, 1.0 m standard cable, and miniature ClickLoc coaxial connector ensure secure installation and reliable signal transmission. The probe carries CSA, ATEX, and IECEx approvals for hazardous‑area use. Technical Specifications Parameter Specification Model / Part Number 330101‑00‑40‑10‑02‑05 Probe Type 3300 XL 8 mm Proximity Probe Thread Size 3/8‑24 UNF Cable Length 1.0 m Cable Features CableLoc™ reinforcement Pull Strength 330 N (75 lbf) Connector Miniature coaxial ClickLoc Isolation Integrated isolation base System Compatibility 3300 XL Proximity Transducer System Certifications CSA, ATEX, IECEx Measurement Capability Static position + dynamic vibration Operating Temperature –35 °C to +120 °C (typical) Storage Temperature –51 °C to +177 °C Weight 0.55 kg Dimensions 20.5 × 22.4 × 3.3 cm Origin USA Condition Brand New Availability In Stock HS Code 8537101190 System TSI compatible Functional Description The 330101‑00‑40‑10‑02‑05 probe provides accurate displacement and vibration measurements essential for machinery protection systems. Its advanced mechanical reinforcement and improved sensor linearity make it suitable for high‑vibration environments and applications requiring long‑term stability. The probe’s compatibility with both XL and non‑XL 3300‑series components simplifies system upgrades and maintenance. Its rugged construction and hazardous‑area approvals make it a dependable choice for refineries, power plants, and heavy industrial facilities. Application Areas Steam and gas turbines Centrifugal and reciprocating compressors Gearboxes and industrial motors Fluid‑film bearing machines Keyphasor® and speed reference points Hazardous‑area installations FAQ Q: Does this probe require component matching? No. It is fully interchangeable with XL and non‑XL components without recalibration. Q: What makes TipLoc™ and CableLoc™ beneficial? TipLoc™ strengthens the probe tip bond, while CableLoc™ increases cable pull strength for improved durability. Q: Is this probe certified for hazardous areas? Yes. It carries CSA, ATEX, and IECEx approvals. Q: What measurements does this probe support? It provides both static shaft position and dynamic vibration signals.
$200.00 $100.00
-
Bently Nevada Bently Nevada 330104‑08‑14‑05‑01‑00 | 3300 XL Series 8 mm Proximity Probe
Overview The Bently Nevada 330104‑08‑14‑05‑01‑00 proximity probe is an 8 mm eddy‑current sensor designed for accurate non‑contact vibration and displacement measurement in rotating machinery. As part of the 3300 XL series, it offers stable linearity, robust mechanical construction, and seamless compatibility with the 3300 Proximity Transducer System. Design and Construction This model features an M10 × 1 threaded probe with protective armor, providing enhanced durability in harsh industrial environments. It includes a minimum unthreaded length of 80 mm and a minimum case length of 140 mm, making it suitable for installations requiring extended reach or deeper mounting configurations. The probe is supplied with a 0.5 m standard cable terminated with a miniature ClickLoc coaxial connector and a protective connector cover. The “00” suffix indicates that this configuration does not require hazardous‑area approvals, making it ideal for general industrial applications where agency certifications are not mandatory. Manufactured in the USA and compliant with RoHS, the probe maintains the high‑quality standards associated with Bently Nevada’s vibration monitoring solutions. Technical Specifications Parameter Specification Model / Part Number 330104‑08‑14‑05‑01‑00 Probe Type 3300 XL 8 mm Proximity Probe Thread Size M10 × 1 Unthreaded Length 80 mm minimum Case Length 140 mm minimum Cable Length 0.5 m Cable Type Armored Connector Miniature coaxial ClickLoc with cover Certifications RoHS compliant (no hazardous‑area approvals) System Compatibility 3300 Proximity Transducer System Measurement Capability Static position + dynamic vibration Operating Temperature –35 °C to +120 °C (typical probe rating) Storage Temperature –51 °C to +177 °C Weight 0.06 kg Dimensions 1.8 × 1.6 × 123 cm Origin USA Condition Brand New Availability In Stock HS Code 8537101190 System TSI compatible Functional Description The 330104‑08‑14‑05‑01‑00 probe provides precise displacement and vibration measurements when paired with a 3300 XL Proximitor Sensor. Its armored construction protects against mechanical damage, while the ClickLoc connector ensures secure, repeatable electrical connections. The extended case and unthreaded lengths allow installation in deeper probe sleeves or housings, making this model suitable for a wide range of industrial machinery. Its rugged design supports long‑term reliability in oil and gas, petrochemical, municipal engineering, and general industrial environments. Application Areas Pumps, compressors, and turbines Petrochemical and refinery equipment Municipal and industrial rotating machinery Installations requiring extended probe reach General vibration and displacement monitoring FAQ Q: Does this model include hazardous‑area certifications No. The “00” suffix indicates no agency approvals, making it suitable for non‑hazardous industrial environments. Q: What cable length is included This configuration includes a 0.5 m standard cable. Q: Is the probe compatible with the 3300 XL Proximitor Sensor Yes. It integrates fully with the 3300 Proximity Transducer System. Q: What advantages does the armored design provide It protects the probe from mechanical damage and improves durability in harsh environments.
$200.00 $100.00
-
Bently Nevada Bently Nevada 330103‑12‑16‑10‑02‑05 | 3300 XL Series 8 mm Proximity Probe
Overview The Bently Nevada 330103‑12‑16‑10‑02‑05 proximity probe is part of the 3300 XL 8 mm transducer family, engineered for precise shaft vibration and displacement measurement in rotating machinery. Designed for long‑term stability and high accuracy, it integrates seamlessly with the 3300 Proximity Transducer System used in critical turbomachinery and TSI applications. Functional Characteristics This probe operates as the sensing element within the 3300 XL system, producing a voltage proportional to the distance between the probe tip and a conductive target surface. When paired with matching extension cables and Proximitor sensors, it delivers accurate static position and dynamic vibration measurements essential for machinery protection. The probe supports full system interchangeability, allowing replacement without recalibration. Its rugged construction ensures consistent performance in environments exposed to vibration, temperature fluctuations, and mechanical stress. Technical Specifications Parameter Specification Model / Part Number 330103‑12‑16‑10‑02‑05 Probe Type 3300 XL 8 mm Proximity Probe Thread Size Standard 8 mm probe thread (M10 × 1 or 3/8‑24 depending on configuration; this model uses XL 8 mm standard) Cable Length 1.6 m (typical for “12‑16‑10” configuration) Connector Miniature coaxial ClickLoc System Compatibility 3300 Proximity Transducer System Measurement Capability Static position + dynamic vibration Applications Vibration, position, Keyphasor reference, speed measurement Operating Temperature –35 °C to +120 °C Storage Temperature –51 °C to +177 °C Weight 0.06 kg Dimensions 1.8 × 1.6 × 123 cm Origin USA Condition Brand New Availability In Stock HS Code 8537101190 System TSI compatible Application Areas Fluid‑film bearing machines Steam and gas turbines Compressors and expanders Gearboxes and industrial motors Keyphasor reference and speed measurement points General vibration and displacement monitoring in critical rotating assets FAQ Q: Is the probe interchangeable with other 3300 XL components Yes. The 330103‑12‑16‑10‑02‑05 is fully interchangeable with 3300 XL extension cables and Proximitor sensors. Q: What measurements can this probe support It provides both static shaft position and dynamic vibration signals. Q: Can this model be used for Keyphasor applications Yes. The 8 mm XL probe is commonly used for Keyphasor reference and speed measurement. Q: Does the probe require calibration during installation No. XL‑series components are factory‑matched and do not require field calibration.
$200.00 $100.00
-
Bently Nevada Bently Nevada 128987‑130‑00‑00 | 3300 XL Series | 8 mm Proximity Probe
Overview The Bently Nevada 128987‑130‑00‑00 proximity probe is part of the 3300 XL 8 mm transducer family, engineered for precise shaft displacement and vibration measurement in rotating machinery. Its 8 mm tip design provides a stable linear response, making it suitable for both static position monitoring and dynamic vibration analysis in critical equipment. Technical Specifications Parameter Specification Model 128987‑130‑00‑00 Product Type 3300 XL 8 mm Proximity Probe Brand Bently Nevada Weight 0.55 kg Dimensions 20.5 × 22.4 × 3.3 cm Tip Diameter 8 mm Linear Range 0.25–2.0 mm (10–80 mils) Sensitivity −7.87 V/mm (−200 mV/mil) Frequency Response 0–10 kHz Cable Length 130 in (10.8 ft) Body Material Stainless steel System Compatibility 3300 XL Proximity Transducer System, TSI Condition New Origin USA MOQ 1 Availability In Stock HS Code 8537101190 Functional Description The 128987‑130‑00‑00 probe measures the distance between its tip and a conductive target surface, typically a rotating shaft. This measurement is used to detect shaft vibration, axial position, and mechanical condition changes. Its 8 mm design offers a wide linear operating range and high sensitivity, enabling accurate diagnostics across a broad frequency spectrum. The probe’s stainless‑steel housing provides mechanical durability in harsh industrial environments. A factory‑installed cable and connector ensure consistent signal quality and simplify integration with Bently Nevada proximitor sensors and monitoring systems. The extended 130‑inch cable allows flexible routing in confined or complex machinery layouts. Application Scenarios Turbine shaft vibration and position monitoring Compressor and pump displacement measurement Gearbox condition monitoring High‑speed rotating machinery diagnostics Applications requiring 8 mm probe tip clearance FAQ Q: What proximitor does this probe pair with? A: It is designed for use with 3300 XL proximitor sensors matched to the 8 mm probe series. Q: Can the probe operate in high‑vibration environments? A: Yes. The stainless‑steel body and robust cable design ensure stable performance under continuous vibration. Q: What is the primary advantage of the 8 mm tip? A: It provides a wider linear range and improved tolerance for shaft runout or thermal expansion. Q: Is the cable replaceable? A: No. The cable is factory‑installed to maintain calibrated system performance.
$200.00 $100.00
-
Bently Nevada Bently Nevada 330101-00-18-10-12-05 | 3300 XL Series | 8 mm Proximity Probe
Overview The Bently Nevada 330101-00-18-10-12-05 proximity probe is an 8 mm displacement sensor designed for high‑accuracy shaft position and vibration measurement in rotating machinery. As part of the 3300 XL Proximity Transducer System, it provides stable, repeatable output suitable for machinery protection and continuous condition monitoring. Technical Specifications Parameter Specification Model 330101-00-18-10-12-05 Probe Type 3300 XL 8 mm Proximity Probe Thread Size 3/8‑24 UNF Cable Length 1.0 m (3.3 ft) Cable Technology CableLoc reinforced design (330 N pull strength) Probe Tip Technology TipLoc molded tip bonding Optional Cable Type FluidLoc leak‑prevention cable Connector Type Gold‑plated ClickLoc connector Certifications CSA, ATEX, IECEx System Compatibility 3300 XL Proximity Transducer System Weight 0.06 kg Dimensions 1.8 × 1.6 × 123 cm HS Code 8537101190 Origin USA Condition New MOQ 1 Lead Time In stock System TSI Status Active Functional Characteristics The 330101-00-18-10-12-05 probe incorporates several patented mechanical enhancements to ensure long‑term reliability. The TipLoc molding process secures the probe tip to the body, preventing separation under vibration or thermal cycling. The CableLoc design reinforces the cable‑to‑probe interface, providing exceptional tensile strength for demanding installations. Gold‑plated ClickLoc connectors maintain low‑resistance electrical contact across the probe, extension cable, and Proximitor sensor, ensuring signal integrity. Optional FluidLoc cables prevent oil migration, making the probe suitable for lubrication‑rich environments. The probe meets global hazardous‑area certifications, enabling deployment in oil and gas, power generation, and heavy industrial applications. Application Scenarios This probe is commonly used in: Turbines and compressors High‑speed pumps and motors Gearboxes and industrial drive systems API 670–compliant protection systems Machinery requiring continuous vibration and displacement monitoring FAQ Q: Does this probe require matched calibration with its extension cable? A: No. The 3300 XL system is designed for full interchangeability without bench calibration. Q: Can this model replace older 8 mm probes? A: Yes. The mechanical and electrical characteristics support direct replacement in most legacy systems. Q: Is the probe suitable for hazardous environments? A: Yes. It carries CSA, ATEX, and IECEx approvals for use in classified areas.
$200.00 $100.00
-
Bently Nevada Bently Nevada 330101-00-18-15-12-05 | 3300 XL Series | 8 mm Proximity Probe
Overview The Bently Nevada 330101-00-18-15-12-05 proximity probe is an 8 mm transducer engineered for precise shaft displacement and vibration measurement in rotating equipment. As part of the 3300 XL Proximity Transducer System, it provides stable, repeatable performance suitable for machinery protection and long‑term condition monitoring. Technical Specifications Parameter Specification Model 330101-00-18-15-12-05 Probe Type 3300 XL 8 mm Proximity Probe System Compatibility 3300 XL Proximity Transducer System Mechanical Mounting 4‑hole mounting footprint (legacy compatible) Installation Options DIN‑rail or panel‑mount configurations RFI/EMI Immunity Enhanced shielding for high‑interference environments Terminal Type SpringLoc terminals (no screw clamps) Weight 0.08 kg Dimensions 112 × 1.5 × 1.2 cm HS Code 8537101190 Origin USA Condition New MOQ 1 Lead Time In stock System TSI Status Active Functional Characteristics The 330101-00-18-15-12-05 probe integrates directly with matching Proximitor sensors and extension cables, forming a complete displacement measurement chain. Its mechanical footprint mirrors earlier probe generations, allowing drop‑in replacement without additional hardware. Improved electromagnetic immunity ensures stable operation even in non‑metallic housings such as fiberglass enclosures. The probe meets CE compliance requirements without the need for shielded conduit, reducing installation complexity. SpringLoc terminals provide secure, tool‑free wiring, improving reliability in high‑vibration environments and reducing installation time. Application Scenarios This probe is widely used in: Turbines and compressors High‑speed motors and pumps Gearboxes and industrial drive systems API 670–compliant protection systems Machinery requiring continuous vibration and position monitoring FAQ Q: Can this probe replace older 3300 series 8 mm probes? A: Yes. The mounting pattern and electrical characteristics support direct replacement in most legacy installations. Q: Does the probe require matched calibration with its extension cable? A: No. The 3300 XL architecture is designed for full interchangeability without bench calibration. Q: Is the probe suitable for high‑interference environments? A: Yes. Its enhanced RFI/EMI immunity allows reliable operation near RF sources and in non‑metallic housings.
$200.00 $100.00
-
Bently Nevada Bently Nevada | 330701-00-40-10-11-05 | 3300 XL 11 mm Proximity Probe
Overview The 330701-00-40-10-11-05 Bently Nevada 3300 XL 11 mm Proximity Probe is a precision eddy current sensor designed for vibration and shaft position monitoring in critical rotating machinery. As part of the 3300 XL Proximity Transducer System, it offers complete interchangeability with probes, extension cables, and Proximitor sensors, eliminating the need for individual calibration and simplifying installation. Technical Specifications Model Number: 330701-00-40-10-11-05 Product Type: 3300 XL 11 mm Proximity Probe Probe Diameter: 11 mm Thread Size: M10 × 1 Cable Options: Armored and unarmored variants available Connector Type: Miniature coaxial ClickLoc connector Optional Feature: FluidLoc cable to prevent oil/liquid migration Operating Temperature Range: -51°C to +177°C Weight: 0.08 kg Dimensions: 112 × 1.5 × 1.2 cm System Compatibility: 3300 XL Proximity Transducer System Backward Compatibility: Compatible with non-XL 3300 5 mm and 8 mm components Compliance: API 670 standards for mechanical configuration, accuracy, and linear range Certifications: CSA, ATEX, IECEx approvals for hazardous area use Origin: USA HS Code: 8537101190 Key Features Eddy current technology for precise vibration and displacement monitoring Wide operating temperature range for extreme environments FluidLoc cable option prevents contamination from oil migration Fully interchangeable with 3300 XL system components, eliminating calibration requirements Certified for hazardous environments (CSA, ATEX, IECEx) Rugged construction for long-term stability and durability Application Scenarios The 330701-00-40-10-11-05 probe is widely used in turbines, compressors, pumps, and other fluid-film bearing machines. It is particularly suited for predictive maintenance programs, providing accurate real-time data to improve reliability, reduce downtime, and optimize operational efficiency. FAQ Q: What is the operating temperature range of this probe? A: It operates reliably between -51°C and +177°C. Q: Does it require calibration during installation? A: No, it is fully interchangeable and does not require bench calibration. Q: Can it be used in hazardous environments? A: Yes, it carries CSA, ATEX, and IECEx certifications. Q: What optional features are available? A: The FluidLoc cable option prevents oil and liquid migration through the cable interior.
$200.00 $100.00
-
Bently Nevada Bently Nevada | 330104-01-06-05-01-05 | 3300 XL 8 mm Proximity Probe
Overview The 330104-01-06-05-01-05 Bently Nevada 8 mm Proximity Probe is a precision sensor designed for use in eddy current proximity transducer systems. Engineered for durability and accuracy, it provides reliable vibration and shaft position measurements in critical rotating machinery. Its armored construction and corrosion-resistant connector ensure long-term performance in harsh industrial environments. Technical Specifications Model Number: 330104-01-06-05-01-05 Product Type: 3300 XL 8 mm Proximity Probe Thread Size: M10 × 1 Minimum Unthreaded Length: 10 mm Minimum Case Length: 60 mm Cable Length: 0.5 m (1.6 ft) armored cable Connector Type: Miniature coaxial ClickLoc connector Weight: 0.06 kg Dimensions: 1.8 × 1.6 × 123 cm System Compatibility: 3300 XL Proximity Transducer System Backward Compatibility: Compatible with non-XL 3300 5 mm and 8 mm components Compliance: API 670 standards for mechanical configuration and measurement accuracy Certifications: CSA, ATEX, IECEx approvals for hazardous area use Origin: USA HS Code: 8537101190 Key Features Robust armored construction for mechanical protection Corrosion-resistant connector for reliable signal transmission Fully interchangeable with other 3300 XL 8 mm system components Backward compatibility with non-XL 3300 series probes Certified for hazardous environments (CSA, ATEX, IECEx) Application Scenarios The 330104-01-06-05-01-05 probe is ideal for turbines, compressors, pumps, and other fluid-film bearing machines. It is particularly suited for hazardous industrial environments where certified safety compliance and precise monitoring are required. FAQ Q: What is the cable length of this probe? A: The probe includes a 0.5 m (1.6 ft) armored cable. Q: Is it compatible with older 3300 series components? A: Yes, it is backward compatible with non-XL 3300 5 mm and 8 mm components. Q: Does it require calibration when installed? A: No, it is fully interchangeable and does not require bench calibration.
$200.00 $100.00
You have seen 240 out of 693 products