The Bently Nevada 3300 Series delivers precise rotor and machinery monitoring. Our inventory provides sensors, probes, and spare parts for both current and legacy systems.
Bently Nevada 3300 Series
-
Bently Nevada Bently Nevada 330104‑00‑05‑05‑11‑05 3300 XL Proximity Probe
Overview The Bently Nevada 330104‑00‑05‑05‑11‑05 proximity probe is part of the 3300 XL 8 mm transducer family, engineered for high‑accuracy non‑contact measurement of shaft vibration and displacement in rotating machinery. Its armored construction and enhanced mechanical durability make it suitable for harsh industrial environments where long‑term reliability is essential. Design and Construction This probe features an M10×1 threaded housing and a molded PPS sensing tip. The PPS material provides increased encapsulation thickness around the coil, improving resistance to mechanical impact and environmental stress. The probe includes a 1.0‑meter FluidLoc cable equipped with an 11‑series miniature coaxial ClickLoc connector and a connector protector to maintain shielding integrity. The 330104‑00‑05‑05‑11‑05 is designed for seamless integration with the 3300 XL Proximitor Sensor and extension cables, forming a complete eddy‑current transducer system capable of delivering stable, repeatable measurements. Technical Specifications Parameter Specification Model 330104‑00‑05‑05‑11‑05 Probe Type 3300 XL 8 mm Proximity Probe Thread Type M10×1 Minimum Case Length 50 mm Cable Length 1.0 m (FluidLoc armored cable) Connector 11‑series miniature coaxial ClickLoc Tip Material PPS (Polyphenylene Sulfide) Measurement Type Static position and dynamic vibration System Compatibility 3300 XL Proximity Transducer System Backward Compatibility Non‑XL 5 mm and 8 mm probes (with proper bend radius) Certifications CSA, ATEX, IECEx Weight 0.55 kg Dimensions 20.5 × 22.4 × 3.3 cm HS Code 8537101190 Origin USA Minimum Order 1 unit Product Status Active System TSI Performance Characteristics The probe is part of the 3300 XL platform, which eliminates the need for matched calibration between probes, cables, and Proximitor sensors. This ensures consistent linearity, temperature stability, and measurement accuracy across the entire system. The armored cable design enhances mechanical protection, making the probe suitable for high‑vibration or physically exposed installations. When installed with the proper minimum bend radius, the probe can be interchanged with non‑XL 3300 series components without compromising performance. Application Scenarios Turbine and compressor vibration monitoring Shaft displacement and axial position measurement High‑vibration industrial environments requiring armored probes API‑compliant machinery protection systems Installations requiring backward compatibility with legacy 3300 components FAQ Q: Can this probe replace older 3300 series 5 mm or 8 mm probes Yes. It is backward‑compatible when installed with the correct cable bend radius. Q: What advantages does the PPS tip provide The thicker encapsulation improves durability and protects the sensing coil from mechanical damage. Q: Does the probe require matched calibration with its Proximitor sensor No. The 3300 XL system is designed for full interchangeability without matched component sets.
$200.00 $100.00
-
Bently Nevada Bently Nevada 330103‑00‑03‑05‑02‑05 3300 XL Proximitor Probe
Overview The Bently Nevada 330103‑00‑03‑05‑02‑05 proximitor probe is a compact 5 mm sensor designed for installations where standard 8 mm probes cannot be accommodated. As part of the 3300 XL proximity transducer system, it provides precise non‑contact measurement of shaft vibration and displacement in confined mounting locations. Design and Construction This probe features a short 30 mm case length and an unthreaded configuration, enabling installation in narrow side‑view or restricted‑access areas without compromising measurement accuracy. Its 0.5‑meter molded cable is terminated with a miniature coaxial ClickLoc connector, ensuring a secure, vibration‑resistant connection and maintaining shielding integrity. The 330103‑00‑03‑05‑02‑05 is engineered to deliver stable performance when paired with compatible extension cables and Proximitor sensors, forming a complete measurement chain suitable for high‑speed rotating machinery. Technical Specifications Parameter Specification Model 330103‑00‑03‑05‑02‑05 Probe Type 3300 XL 5 mm Proximitor Probe Case Length 30 mm Unthreaded Length 0 mm Cable Length 0.5 m Connector Miniature coaxial ClickLoc Measurement Type Static position and dynamic vibration System Compatibility 3300 Proximity Transducer System Weight 0.06 kg Dimensions 1.8 × 1.6 × 123 cm HS Code 8537101190 Origin USA Minimum Order 1 unit Product Status Active System TSI Performance Characteristics The probe generates a voltage output proportional to the distance between the probe tip and the target surface, enabling accurate gap and vibration measurements. Its compact geometry allows installation in tight spaces without reducing side‑view clearance or tip‑to‑tip spacing. The ClickLoc connector design supports rapid installation and minimizes downtime during maintenance, while the probe’s lightweight construction ensures ease of handling during system integration. Application Scenarios Machinery with limited mounting space Side‑view installations requiring compact probe geometry Turbine, compressor, and pump vibration monitoring Shaft displacement and axial position measurement Predictive maintenance and protection systems using 3300 XL components FAQ Q: Why choose a 5 mm probe instead of an 8 mm version The 5 mm design fits installations where space constraints prevent the use of standard 8 mm probes. Q: Is this probe compatible with standard 3300 XL extension cables Yes. It integrates seamlessly with the full 3300 XL transducer system. Q: Does the ClickLoc connector improve reliability Yes. It prevents accidental loosening and maintains shielding integrity in high‑vibration environments.
$200.00 $100.00
-
Bently Nevada Bently Nevada 330904-00-10-05-02-05 3300 NSv Proximity Probes
Overview The Bently Nevada 330904‑00‑10‑05‑02‑05 is a 0.5‑meter extension cable designed for use with the 3300 NSv proximity transducer system. Its compact length, rugged construction, and high‑integrity connectors make it suitable for installations where space is limited and signal reliability is critical. Design and Construction This cable uses gold‑plated brass ClickLoc connectors engineered to maintain secure mechanical engagement even in high‑vibration environments. The miniature coaxial design preserves signal fidelity across the full operating range of NSv probes, supporting accurate displacement and vibration measurements. The 330904‑00‑10‑05‑02‑05 is compatible with both armored and unarmored NSv probe configurations, including M8×1, M10×1, 1/4‑28, and 3/8‑24 threaded probe types. Its CableLoc retention system provides up to 220 N (50 lb) of pull strength, ensuring cable integrity in demanding industrial applications. Technical Specifications Parameter Specification Model 330904‑00‑10‑05‑02‑05 Cable Type 3300 NSv Extension Cable Length 0.5 m Connector Type Gold‑plated ClickLoc miniature coaxial Pull Strength 220 N (50 lb) Probe Compatibility NSv probes (armored/unarmored) Thread Compatibility M8×1, M10×1, 1/4‑28, 3/8‑24 Certifications CSA, ATEX, IECEx Weight 0.14 kg Dimensions 20.5 × 22.5 × 3.5 cm HS Code 8537101190 Origin USA Minimum Order 1 unit Product Status Active System TSI Performance Characteristics The cable maintains excellent electrical shielding and mechanical robustness, ensuring stable signal transmission in chemically aggressive or high‑vibration environments. When paired with NSv probes, it supports improved side‑view measurement characteristics, making it suitable for installations where direct axial access is limited. Bently Nevada recommends using connector protectors in wet or corrosive environments to prevent moisture ingress and maintain long‑term signal integrity. Application Scenarios Process compressors with limited installation space Machinery requiring reverse‑mount or side‑view probe configurations Hazardous‑area monitoring systems requiring certified components High‑vibration environments where cable retention strength is critical Chemical processing equipment exposed to corrosive atmospheres FAQ Q: Is this cable compatible with all NSv probe types Yes. It supports both armored and unarmored NSv probes across multiple thread configurations. Q: What makes the CableLoc design important It provides high pull‑strength retention, preventing accidental disconnection in high‑vibration environments. Q: Can this cable be used in hazardous areas Yes. It carries CSA, ATEX, and IECEx certifications for global hazardous‑area compliance.
$200.00 $100.00
-
Bently Nevada Bently Nevada 330103‑00‑05‑10‑02‑CN 3300 XL Proximity Probe
Overview The Bently Nevada 330103‑00‑05‑10‑02‑CN proximity probe is part of the 3300 XL 8 mm transducer family and is engineered for precise non‑contact measurement of shaft vibration and displacement. This model features a short 0.5‑meter cable configuration and is tailored for installations requiring compact probe assemblies, particularly in applications with limited mounting space. Design and Construction This probe uses an M10×1 threaded body and incorporates a 50 mm case length, making it suitable for confined installation areas. The cable is factory‑molded and terminated with a gold‑plated ClickLoc miniature coaxial connector, providing a secure, vibration‑resistant connection and maintaining shielding integrity. The 330103‑00‑05‑10‑02‑CN is designed to operate as part of the complete 3300 XL transducer system, working with compatible extension cables and Proximitor sensors to deliver accurate static and dynamic measurements. Technical Specifications Parameter Specification Model 330103‑00‑05‑10‑02‑CN Probe Type 3300 XL 8 mm Proximity Probe Thread Type M10×1 Case Length 50 mm Cable Length 0.5 m Connector Gold‑plated miniature coaxial ClickLoc Measurement Type Static position and dynamic vibration Certifications CSA, ATEX, IECEx Compliance API 670 System Compatibility 3300 XL Proximity Transducer System Weight 0.14 kg Dimensions 20.5 × 22.5 × 3.5 cm HS Code 8537101190 Origin USA Minimum Order 1 unit Product Status Active System TSI Performance Characteristics The probe generates a voltage output proportional to the distance between the probe tip and the target surface, enabling accurate gap and vibration measurements. Its compact design supports installations in restricted spaces while maintaining the durability and performance expected from the 3300 XL series. The 330103‑00‑05‑10‑02‑CN meets API 670 requirements and is certified for hazardous‑area use, making it suitable for critical applications in power generation, petrochemical processing, and heavy industrial environments. Application Scenarios Turbine and compressor vibration monitoring Shaft displacement and axial position measurement Keyphasor reference signal acquisition Speed measurement on rotating machinery Installations requiring short‑cable probe configurations FAQ Q: What makes this model suitable for compact installations Its 50 mm case length and 0.5 m cable allow mounting in tight spaces without compromising measurement accuracy. Q: Is this probe compatible with standard 3300 XL extension cables Yes. It is designed to operate with the full 3300 XL transducer system. Q: Does this model meet hazardous‑area requirements It carries CSA, ATEX, and IECEx approvals for use in classified environments.
$200.00 $100.00
-
Bently Nevada Bently Nevada 330104‑00‑22‑10‑02‑CN 3300 XL Proximity Probe
Overview The Bently Nevada 330104‑00‑22‑10‑02‑CN proximity probe is part of the 3300 XL 8 mm transducer series, engineered for precise non‑contact measurement of shaft vibration and displacement in high‑performance rotating machinery. Its armored construction and extended mechanical dimensions make it suitable for installations exposed to harsh operating conditions and elevated mechanical stress. Design and Construction This probe features an M10×1 threaded body with a long armored case section, providing enhanced protection against physical damage and cable fatigue. The minimum case length of 220 mm supports flexible mounting arrangements, particularly in large machinery where extended reach is required. A 1.0‑meter molded cable is terminated with a miniature coaxial ClickLoc connector, ensuring a secure, vibration‑resistant connection. The ClickLoc mechanism prevents accidental loosening and maintains shielding integrity, supporting stable signal transmission to the Proximitor sensor. System Integration The 330104‑00‑22‑10‑02‑CN is designed for seamless operation with the 3300 XL Proximitor Sensor. The sensor’s mechanical packaging supports both DIN‑rail and panel‑mount installations and maintains the same 4‑hole mounting footprint as earlier generations, simplifying system upgrades. The probe’s mounting base provides built‑in electrical isolation, eliminating the need for additional isolator plates and reducing installation complexity. Technical Specifications Parameter Specification Model 330104‑00‑22‑10‑02‑CN Probe Type 3300 XL 8 mm Proximity Probe Thread Type M10×1 Minimum Case Length 220 mm Cable Length 1.0 m Connector Miniature coaxial ClickLoc Measurement Type Static position and dynamic vibration RFI/EMI Immunity CE‑compliant, suitable for non‑metallic housings System Compatibility 3300 XL Proximity Transducer System Weight 0.55 kg Dimensions 20.5 × 22.4 × 3.3 cm HS Code 8537101190 Origin USA Minimum Order 1 unit Product Status Active System TSI Performance Characteristics The probe and its associated Proximitor sensor offer improved RFI/EMI immunity, allowing installation in fiberglass or other non‑metallic housings without requiring shielded conduit or metallic enclosures. This reduces installation cost while maintaining measurement accuracy. Full interchangeability across probes, cables, and sensors simplifies maintenance and eliminates the need for matched calibration. The armored design provides additional protection in high‑vibration or mechanically exposed environments. Application Scenarios Turbine and compressor vibration monitoring Shaft displacement and axial position measurement High‑vibration environments requiring armored probe assemblies Installations requiring CE‑compliant RFI/EMI performance Machinery protection systems using 3300 XL transducer components FAQ Q: Can this probe be installed in non‑metallic housings? A: Yes. Its enhanced RFI/EMI immunity allows installation in fiberglass housings without signal degradation. Q: Does the probe require a specific Proximitor sensor? A: It is designed for use with 3300 XL Proximitor sensors for optimal accuracy and linearity. Q: Is the probe interchangeable with older 3300 series components? A: Yes. The 3300 XL platform supports full interchangeability without matched calibration.
$200.00 $100.00
-
Bently Nevada Bently Nevada 330101‑00‑24‑10‑02‑00 3300 XL Proximity Probe
Overview The Bently Nevada 330101‑00‑24‑10‑02‑00 proximity probe is part of the 3300 XL 8 mm transducer family, designed for precise non‑contact measurement of shaft vibration and position in rotating machinery. Its mechanical robustness and stable electrical characteristics make it suitable for long‑term use in demanding industrial environments. Design and Construction This probe uses a 3/8‑24 UNF threaded body and includes a 1.0‑meter molded cable terminated with a miniature coaxial ClickLoc connector. The connector design prevents accidental loosening and maintains shielding integrity, ensuring consistent signal transmission to the Proximitor sensor. Compared with 5 mm probes, the 330101‑00‑24‑10‑02‑00 features a thicker encapsulation and reinforced case structure, improving durability in high‑vibration or mechanically exposed installations. The probe is available in armored and unarmored configurations, offering flexibility for different mounting and routing requirements. Technical Specifications Parameter Specification Model 330101‑00‑24‑10‑02‑00 Probe Type 3300 XL 8 mm Proximity Probe Thread Type 3/8‑24 UNF Cable Length 1.0 m Connector Miniature coaxial ClickLoc Measurement Type Static position and dynamic vibration System Compatibility 3300 Proximity Transducer System Weight 0.06 kg Dimensions 1.8 × 1.6 × 123 cm HS Code 8537101190 Origin USA Minimum Order 1 unit Product Status Active System TSI Performance Characteristics The probe produces a voltage output proportional to the distance between the probe tip and the target surface, enabling accurate displacement and vibration measurements. It is suitable for fluid‑film bearing machines and supports Keyphasor reference and speed measurement applications. The 330101‑00‑24‑10‑02‑00 is fully interchangeable with other 3300 XL components and backward‑compatible with non‑XL 5 mm and 8 mm probes, eliminating the need for matched calibration and simplifying system maintenance. Application Scenarios Radial vibration and shaft displacement monitoring Axial position measurement on turbines and compressors Keyphasor reference signal acquisition Speed measurement on rotating machinery High‑vibration industrial environments requiring durable probe construction FAQ Q: Is this probe compatible with older 3300 series components? A: Yes. It can be used with non‑XL 5 mm and 8 mm probes and cables without requiring matched calibration. Q: What type of machines typically use this probe? A: Turbines, compressors, pumps, and other rotating equipment with fluid‑film bearings. Q: Does the probe require a specific Proximitor sensor? A: For optimal accuracy, it should be paired with a 3300 XL Proximitor sensor.
$200.00 $100.00
-
Bently Nevada Bently Nevada 330104‑00‑08‑10‑01‑00 3300 XL 8 mm Probe
Overview The Bently Nevada 330104‑00‑08‑10‑01‑00 proximity probe is part of the 3300 XL 8 mm transducer family, designed for precise non‑contact measurement of shaft vibration and displacement. Its rugged construction and stable electrical characteristics make it suitable for continuous monitoring of rotating equipment in demanding industrial environments. Design and Construction This probe uses an M10×1 threaded body and includes an armored 1.0‑meter cable for enhanced protection in high‑vibration or mechanically exposed installations. The miniature coaxial ClickLoc connector ensures a secure, vibration‑resistant connection that maintains shielding integrity throughout the system. The 330104‑00‑08‑10‑01‑00 is engineered to deliver consistent linearity and measurement accuracy when paired with compatible 3300 XL Proximitor sensors. Its compact dimensions support installation in tight spaces while maintaining full system compatibility. Technical Specifications Parameter Specification Model 330104‑00‑08‑10‑01‑00 Probe Type 3300 XL 8 mm Proximity Probe Thread Type M10×1 Cable Length 1.0 m (armored) Connector Miniature coaxial ClickLoc with protector Measurement Type Static position and dynamic vibration System Compatibility 3300 Proximity Transducer System Weight 0.06 kg Dimensions 1.8 × 1.6 × 123 cm HS Code 8537101190 Origin USA Minimum Order 1 unit Product Status Active System TSI Performance Characteristics The probe generates a voltage output proportional to the distance between the probe tip and the target surface, enabling accurate displacement and vibration measurements. It is suitable for fluid‑film bearing machines and supports Keyphasor reference and speed measurement applications. The armored cable construction provides additional protection against mechanical damage, making the probe suitable for installations with elevated vibration levels or where cable routing is exposed to potential impact. Application Scenarios Radial vibration and shaft displacement monitoring Axial position measurement on turbines and compressors Keyphasor reference signal acquisition Speed measurement on rotating machinery High‑vibration industrial environments requiring armored cabling FAQ Q: Can this probe be used with older 3300 series components? A: It is designed for the 3300 XL system; compatibility with non‑XL components may be limited. Q: What type of machines typically use this probe? A: Turbines, compressors, pumps, and other rotating equipment with fluid‑film bearings. Q: Does the armored cable affect measurement accuracy? A: No. The armored design protects the cable without altering electrical performance.
$200.00 $100.00
-
Bently Nevada Bently Nevada 330104‑12‑20‑10‑02‑00 3300 XL Proximity Transducer
Overview The Bently Nevada 330104‑12‑20‑10‑02‑00 proximity transducer is part of the 3300 XL 8 mm series, designed for high‑accuracy non‑contact measurement of shaft vibration and displacement in critical rotating machinery. Its armored construction and extended mechanical dimensions make it suitable for installations exposed to harsh operating conditions, mechanical stress, and elevated temperatures. Mechanical Design This model incorporates an M10×1 threaded body with a 120 mm unthreaded section and a 200 mm armored case length. The probe housing is manufactured from AISI 303/304 stainless steel, providing corrosion resistance and long‑term durability. A Viton O‑ring is integrated into the design to maintain pressure integrity between the probe tip and the case, supporting reliable operation in environments where differential pressure is present. The probe tip is constructed from Polyphenylene Sulfide (PPS), a material selected for its mechanical strength and thermal stability. This ensures consistent measurement performance across the probe’s operating temperature range of −35°C to +85°C, with storage capability extending from −51°C to +100°C. Electrical Characteristics The 330104‑12‑20‑10‑02‑00 includes a 1.0‑meter cable terminated with a miniature coaxial ClickLoc connector. The connector design prevents accidental loosening and maintains shielding integrity, ensuring stable signal transmission to the associated Proximitor sensor. This probe is fully compatible with the 3300 XL transducer system and supports both static and dynamic measurements, including shaft position, radial vibration, and phase reference signals. Technical Specifications Parameter Specification Model 330104‑12‑20‑10‑02‑00 Probe Type 3300 XL 8 mm Proximity Transducer Thread Type M10×1 Unthreaded Length 120 mm Armored Case Length 200 mm Cable Length 1.0 m Connector Miniature coaxial ClickLoc Tip Material PPS (Polyphenylene Sulfide) Housing Material AISI 303/304 stainless steel Operating Temperature −35°C to +85°C Storage Temperature −51°C to +100°C Weight 0.14 kg Dimensions 20.5 × 22.5 × 3.5 cm HS Code 8537101190 Origin USA Minimum Order 1 unit Product Status Active Performance Characteristics The armored design provides enhanced protection against mechanical impact and cable damage, making the probe suitable for high‑vibration environments. Its extended unthreaded length allows flexible mounting configurations in turbines, compressors, and other large rotating assets. The probe is engineered to maintain linearity and accuracy across its full measurement range when used with 3300 XL Proximitor sensors. Its construction supports long‑term reliability in applications requiring continuous monitoring and API‑compliant performance. Application Scenarios Turbine and compressor vibration monitoring Shaft displacement and axial position measurement High‑vibration industrial environments requiring armored probes Installations with differential pressure across probe housings API 670‑compliant protection systems FAQ Q: Is this probe compatible with non‑XL 3300 series components? A: No. Due to its armored design and electrical characteristics, it is intended for use with 3300 XL system components. Q: What environments benefit most from the armored construction? A: High‑vibration, high‑temperature, or mechanically exposed installations where cable protection is critical. Q: Does the probe require special mounting hardware? A: It uses standard 3300 XL mounting configurations and does not require custom brackets.
$200.00 $100.00
-
Bently Nevada Bently Nevada 330101-00-20-15-12-05 Proximity Probes
Overview The Bently Nevada 330101‑00‑20‑15‑12‑05 proximity probe is part of the 3300 XL 8 mm transducer family, engineered for precise non‑contact measurement of shaft vibration and position in rotating machinery. When paired with its extension cable and Proximitor sensor, it forms a complete measurement chain designed for high‑accuracy monitoring in demanding industrial environments. Design and Operating Principles This probe detects the distance between its tip and a conductive target surface, producing a voltage output proportional to both static shaft position and dynamic vibration amplitude. The 330101‑00‑20‑15‑12‑05 is suitable for fluid‑film bearing machines and supports Keyphasor reference and speed measurement applications. The probe assembly complies with API 670 requirements for linearity, temperature stability, and system configuration. Its mechanical and electrical characteristics ensure consistent performance across a wide operating range. Technical Specifications Parameter Specification Model 330101‑00‑20‑15‑12‑05 Probe Type 3300 XL 8 mm Proximity Probe System Compatibility 3300 XL Proximity Transducer System Measurement Type Static position and dynamic vibration Compliance API 670 Cable Length 2.0 m (probe cable segment) Weight 0.08 kg Dimensions 112 × 1.5 × 1.2 cm HS Code 8537101190 Origin USA Minimum Order 1 unit Product Status Active System TSI Performance Characteristics The probe is engineered for long‑term stability and high immunity to electrical noise. Its design supports extended linear measurement ranges and maintains accuracy across temperature variations. The 330101‑00‑20‑15‑12‑05 is backward‑compatible with earlier non‑XL 3300 series 5 mm and 8 mm components, enabling system upgrades without requiring recalibration or hardware redesign. Application Scenarios Shaft vibration and displacement monitoring Axial position measurement on turbomachinery Keyphasor reference signal acquisition Speed measurement on rotating equipment API 670‑compliant protection and condition monitoring systems FAQ Q: Is this probe compatible with older 3300 series components? A: Yes. It can be used with non‑XL 5 mm and 8 mm probes and cables without requiring matched calibration. Q: What type of machines typically use this probe? A: It is commonly installed on turbines, compressors, pumps, and other fluid‑film bearing machinery. Q: Does the probe require a specific Proximitor sensor? A: For optimal accuracy, it should be paired with a 3300 XL Proximitor sensor.
$200.00 $100.00
-
Bently Nevada Bently Nevada 330730‑040‑02‑00 3300 Series Extension Cable
Overview The Bently Nevada 330730‑040‑02‑00 extension cable is designed for use within the 3300 proximity transducer system, providing reliable signal transmission between proximity probes and associated monitoring hardware. This model supports 11 mm transducer configurations and is suitable for applications requiring extended linear measurement ranges. Design and Construction The cable is manufactured to maintain stable electrical characteristics across its entire length, ensuring accurate displacement and vibration data. With a 2‑meter cable length, the 330730‑040‑02‑00 offers flexibility for installations where probe‑to‑monitor distances vary. Its construction includes anti‑static protection on terminals and connectors, reducing the risk of electrostatic discharge during installation and maintenance. The cable is intended for use with the 3300 XL platform and is not interchangeable with older 7200‑series components without a full system upgrade. Its mechanical design supports straightforward routing in confined spaces, aided by its lightweight 0.06 kg profile. Technical Specifications Parameter Specification Model 330730‑040‑02‑00 Cable Type Extension Cable for 3300 Proximity Transducer System Length 2 m Transducer Compatibility 11 mm 3300 XL systems Frequency Response 0 to 8 kHz Output Sensitivity (System) 3.94 V/mm (with compatible components) Weight 0.06 kg Dimensions 1.8 × 1.6 × 123 cm HS Code 8537101190 Origin USA Minimum Order 1 unit Product Status Active System TSI Performance Characteristics The 330730‑040‑02‑00 supports both static and dynamic measurements, making it suitable for axial position, radial vibration, and Keyphasor reference applications. Its electrical performance is optimized for the extended linear range of 11 mm systems, offering greater measurement flexibility compared to standard 8 mm configurations. The cable does not require agency approvals but is built to Bently Nevada’s established quality standards for industrial monitoring components. Application Scenarios Axial position monitoring on large rotating machinery Keyphasor signal transmission Radial vibration measurement on fluid‑film bearing equipment Installations requiring extended linear range performance System upgrades from legacy transducer platforms to 3300 XL FAQ Q: Can this cable be used with 7200‑series transducers? A: No. A full upgrade to the 3300 XL system is required for compatibility. Q: What measurement types does this cable support? A: It supports displacement, vibration, and Keyphasor reference signals when used with compatible probes and drivers. Q: Does the cable require special handling? A: While anti‑static protection is included, standard ESD precautions are recommended during installation.
$200.00 $100.00
-
Bently Nevada Bently Nevada 330101‑00‑13‑10‑02‑00 3300 XL 8 mm Proximity Probe
Overview The Bently Nevada 330101‑00‑13‑10‑02‑00 proximity probe is part of the 3300 XL 8 mm transducer family, engineered for accurate shaft vibration and position measurements in rotating machinery. Its mechanical design and electrical characteristics ensure stable performance in harsh industrial environments where continuous monitoring is required. Design and Construction This probe uses a 3/8‑24 UNF mounting thread and includes a factory‑molded 1.0‑meter cable terminated with a ClickLoc miniature coaxial connector. The connector design prevents accidental loosening and maintains consistent signal integrity. The probe’s compact housing supports installations where space is limited while maintaining compatibility with standard 3300 XL mounting hardware. The 330101‑00‑13‑10‑02‑00 maintains the same mounting footprint as earlier 3300 series probes, enabling direct replacement without modifying brackets or panel layouts. Its electrically isolated base eliminates the need for additional insulating plates, simplifying installation. Technical Specifications Parameter Specification Model 330101‑00‑13‑10‑02‑00 Probe Type 3300 XL 8 mm Proximity Probe Thread Type 3/8‑24 UNF Cable Length 1.0 m Connector Miniature coaxial ClickLoc System Compatibility 3300 XL Proximity Transducer System RFI/EMI Immunity Meets CE requirements Weight 0.1 kg Dimensions 20.5 × 22.4 × 3.3 cm HS Code 8537101190 Origin USA Minimum Order 1 unit Product Status Active System TSI Performance Characteristics The probe is designed to operate reliably in electrically noisy environments. Its enhanced RFI/EMI immunity allows installation in non‑metallic housings without requiring shielded conduit or metallic enclosures. This reduces installation cost while maintaining measurement accuracy. The probe is fully compatible with 3300 XL extension cables and Proximitor sensors, ensuring consistent linearity and calibration across the entire transducer system. Application Scenarios Turbomachinery vibration and displacement monitoring Shaft position measurement Phase reference and speed measurement Industrial rotating equipment requiring high‑precision proximity sensing Installations requiring CE‑compliant RFI/EMI performance FAQ Q: Can this probe replace older 3300 series 8 mm probes? A: Yes. It shares the same mounting footprint and electrical characteristics, allowing direct replacement. Q: Does the probe require a specific Proximitor sensor? A: It is designed for use with 3300 XL Proximitor sensors for optimal linearity and calibration. Q: Is the ClickLoc connector field‑replaceable? A: No. The cable and connector are factory‑molded to maintain shielding and performance.
$200.00 $100.00
-
Bently Nevada Bently Nevada 330500‑07‑04 Velomitor Piezo‑Velocity Sensor
Overview The Bently Nevada 330500‑07‑04 Velomitor sensor is a piezo‑velocity transducer designed to measure machine casing vibration with high accuracy and long‑term stability. Its compact form factor and rugged construction make it suitable for continuous monitoring of rotating equipment in demanding industrial environments. Performance Characteristics This sensor provides a calibrated sensitivity of 3.94 mV/mm/s (100 mV/in/s) with a ±5% tolerance, enabling precise velocity measurements across a wide operating range. The device supports peak vibration levels up to 1270 mm/s (50 in/s), allowing it to capture both low‑frequency and high‑energy vibration signatures. The 330500‑07‑04 operates with an output bias of −12 VDC ±3 VDC and maintains a dynamic output impedance below 2400 ohms, ensuring compatibility with standard Bently Nevada monitoring platforms and third‑party systems that accept piezo‑velocity inputs. Technical Specifications Parameter Specification Model 330500‑07‑04 Sensor Type Velomitor Piezo‑Velocity Sensor Sensitivity 3.94 mV/mm/s (100 mV/in/s) ±5% Maximum Velocity 1270 mm/s (50 in/s) peak Output Bias Voltage −12 VDC ±3 VDC Certifications CSA, ATEX Weight 0.16 kg Dimensions 2.5 × 2.5 × 7.2 cm HS Code 8537101190 Origin USA Minimum Order 1 unit System Compatibility TSI and Bently Nevada monitoring systems Product Status Active Design Features The sensor incorporates SpringLoc terminals, enabling tool‑free wiring and eliminating the risk of loose screw‑type connections. This design improves installation reliability and reduces maintenance time. Its sealed housing and robust internal construction allow the sensor to withstand harsh operating conditions, including elevated temperatures and mechanical shock. Application Scenarios Vibration monitoring on pumps, compressors, motors, and fans Machinery protection systems requiring velocity‑based measurements Installations with limited mounting space Facilities requiring certified sensors for hazardous areas FAQ Q: What type of vibration does the 330500‑07‑04 measure? A: It measures casing vibration velocity, making it suitable for general‑purpose machinery monitoring. Q: Can this sensor be used with non‑Bently Nevada systems? A: Yes. As long as the monitoring system accepts piezo‑velocity inputs with similar electrical characteristics. Q: Does the sensor require periodic recalibration? A: Under normal operating conditions, recalibration is not required due to the stability of the piezoelectric sensing element.
$200.00 $100.00
-
Bently Nevada Bently Nevada 330930‑045‑01‑05 3300 NSv Extension Cable
Overview The Bently Nevada 330930‑045‑01‑05 extension cable is part of the 3300 NSv and 3300 XL proximity transducer family, designed to support accurate shaft vibration and position measurements in compact machinery. This cable forms a critical link between the proximity probe and the associated driver, ensuring stable signal transmission in applications where installation space is limited. Design and Construction This 4.5‑meter extension cable incorporates stainless‑steel armor and an FEP outer jacket to withstand mechanical stress, chemical exposure, and elevated temperatures commonly found in industrial environments. The cable is engineered to maintain shielding integrity and minimize electrical noise, supporting reliable static and dynamic measurement performance. Technical Specifications Parameter Specification Model 330930‑045‑01‑05 Cable Type 3300 NSv / 3300 XL Extension Cable Length 4.5 m (14.8 ft) Armor Stainless steel Jacket Material FEP System Compatibility 3300 XL Proximity Transducer System Function Probe‑to‑driver extension Certifications CSA, ATEX, IECEx Weight 0.18 kg Dimensions 20.4 × 22 × 3 cm HS Code 8537101190 Product Status Active Origin USA Minimum Order 1 unit Functional Characteristics The cable preserves the calibrated relationship between the probe tip and the target surface by maintaining consistent impedance and shielding throughout the transducer system. The 330930‑045‑01‑05 supports vibration, position, Keyphasor, and speed measurements without requiring matched components, enabling straightforward replacement and system expansion. Application Scenarios Small and medium turbomachinery Fluid‑film bearing equipment Compressors, pumps, and industrial rotating assets Installations requiring compact NSv‑type transducer components Hazardous‑area monitoring systems requiring certified cabling FAQ Q: Does this cable require matched calibration with the probe and driver? A: No. The 3300 NSv and 3300 XL systems are designed for full interchangeability without matched component sets. Q: Can this cable be used with standard 8 mm XL probes? A: Yes. It is compatible with the 3300 XL transducer system when used in NSv‑appropriate applications. Q: What environments is the cable approved for? A: It carries CSA, ATEX, and IECEx certifications for global hazardous‑area compliance.
$200.00 $100.00
-
Bently Nevada Bently Nevada 330101-33-53-10-02-05 3300 XL 8 mm Proximity Probes
Overview The Bently Nevada 330101‑33‑53‑10‑02‑05 proximity probe is part of the 3300 XL 8 mm transducer family, engineered for precise shaft vibration, position, and phase reference measurements in rotating machinery. Designed for long‑term stability in demanding industrial environments, this probe integrates seamlessly into the 3300 Proximity Transducer System. Key Features 8 mm tip for standard industrial vibration monitoring 3/8‑24 UNF mounting thread, non‑armored configuration Minimum unthreaded length: 3.3 in Minimum case length: 5.3 in Factory‑molded 1.0 m cable with ClickLoc miniature coaxial connector Compatible with 3300 XL extension cables and drivers Certified for hazardous locations (CSA, ATEX, IECEx) Lightweight design at 0.04 kg Manufactured in the USA Technical Specifications Parameter Specification Model 330101‑33‑53‑10‑02‑05 Probe Type 3300 XL 8 mm Proximity Probe Thread Type 3/8‑24 UNF Cable Length 1.0 m (3.3 ft) Connector Miniature coaxial ClickLoc System Compatibility 3300 Proximity Transducer System Interchangeability Backward‑compatible with non‑XL 3300 5 mm & 8 mm probes Certifications CSA, ATEX, IECEx Weight 0.04 kg Dimensions 58.5 × 1.5 × 1.5 cm HS Code 8537101190 Operating System TSI Product Status Active Functional Characteristics The probe uses an eddy‑current sensing principle to detect the distance between the probe tip and a conductive target, typically a rotating shaft. The 3300 XL design improves temperature stability, linearity, and long‑term drift performance compared to earlier 3300 series probes. Backward compatibility allows the 330101‑33‑53‑10‑02‑05 to replace older 5 mm or 8 mm non‑XL probes without modifying existing mounting hardware or system calibration, making it ideal for retrofit applications. Applications Turbomachinery vibration monitoring Shaft position and radial displacement measurement Phase reference and speed measurement Compressors, turbines, pumps, and industrial rotating equipment Hazardous‑area installations requiring certified components FAQ Q: Can this probe be used with older 3300 drivers? A: Yes. The probe is fully backward‑compatible with non‑XL 3300 series drivers and extension cables. Q: Is the cable replaceable? A: No. The probe cable is factory‑molded to maintain shielding integrity and measurement accuracy. Q: What environments is this probe certified for? A: It carries CSA, ATEX, and IECEx approvals for hazardous industrial zones.
$200.00 $100.00
-
Bently Nevada Bently Nevada 330103‑00‑06‑05‑02‑02 3300 XL Proximity Probe
Overview The Bently Nevada 330103‑00‑06‑05‑02‑02 proximity probe is part of the 3300 XL 8 mm transducer system, engineered for precise non‑contact measurement of shaft vibration and displacement in rotating machinery. Its compact, non‑armored design makes it suitable for installations where space is limited but high‑accuracy monitoring is required. Design and Construction This probe features an M10×1 threaded body for secure mounting across a wide range of machine housings. The 330103‑00‑06‑05‑02‑02 includes a 0.5‑meter molded coaxial cable terminated with a miniature ClickLoc connector, ensuring a stable, vibration‑resistant electrical interface. The ClickLoc mechanism prevents accidental loosening, maintaining signal integrity in high‑vibration environments. The probe is designed for seamless integration with 3300 XL extension cables and Proximitor sensors, forming a complete eddy‑current transducer system with consistent linearity and temperature stability. Technical Specifications Parameter Specification Model 330103‑00‑06‑05‑02‑02 Probe Type 3300 XL 8 mm Proximity Probe Thread Type M10×1 Armor None (non‑armored configuration) Cable Length 0.5 m Connector Miniature coaxial ClickLoc Measurement Type Static position and dynamic vibration System Compatibility 3300 XL Proximity Transducer System Weight 0.15 kg Dimensions 20.4 × 22.2 × 3.7 cm HS Code 8537101190 Origin USA Minimum Order 1 unit Product Status Active System TSI Performance Characteristics The 330103‑00‑06‑05‑02‑02 provides accurate gap‑to‑voltage conversion for both vibration and displacement monitoring. Its compact geometry supports installation in restricted spaces without compromising measurement accuracy. The probe’s non‑armored design offers flexibility for routing while maintaining durability for industrial environments. The ClickLoc connector ensures secure engagement, reducing the risk of signal interruption and supporting long‑term system reliability. Application Scenarios Turbine, compressor, and pump vibration monitoring Shaft displacement and axial position measurement Installations requiring compact probe geometry Predictive maintenance and machinery protection systems OEM and retrofit applications using 3300 XL components FAQ Q: What makes this probe suitable for tight installations Its compact, non‑armored design and short cable length allow mounting in restricted spaces without affecting measurement accuracy. Q: Is this probe compatible with 3300 XL extension cables Yes. It integrates seamlessly with the full 3300 XL transducer system. Q: Does the ClickLoc connector improve reliability Yes. It prevents accidental loosening and maintains shielding integrity in high‑vibration environments.
$200.00 $100.00
-
Bently Nevada Bently Nevada 330930‑040‑04‑CN 3300 NSv Extension Cable
Overview The Bently Nevada 330930‑040‑04‑CN extension cable is part of the 3300 NSv proximity transducer system, engineered to provide reliable signal transmission in installations where space is limited and environmental protection is essential. Its armored stainless‑steel construction and FEP outer jacket make it suitable for harsh industrial environments, particularly those involving compressors and compact rotating machinery. Design and Construction This cable features a 4.0‑meter (13.1‑foot) length and is equipped with stainless‑steel armor for mechanical protection. The FEP jacket enhances chemical resistance and durability in corrosive or high‑temperature environments. A connector protector is included to safeguard the miniature coaxial interface during installation and operation. The 330930‑040‑04‑CN integrates seamlessly with NSv proximity probes and Proximitor sensors, forming a complete measurement chain for monitoring small‑shaft machinery and applications where standard 5 mm or 8 mm systems cannot be installed. Technical Specifications Parameter Specification Model 330930‑040‑04‑CN Cable Type 3300 NSv Extension Cable Length 4.0 m Armor Stainless steel Jacket Material FEP Connector Miniature coaxial with protector System Compatibility 3300 NSv / 3300 XL Proximity Transducer System Weight 0.18 kg Dimensions 20.3 × 22 × 3.5 cm HS Code 8537101190 Origin USA Minimum Order 1 unit Product Status Active System TSI Performance Characteristics The 330930‑040‑04‑CN maintains stable electrical characteristics over extended cable runs, ensuring accurate displacement and vibration measurements. Its armored design provides superior protection against mechanical damage, making it suitable for high‑vibration environments such as process compressors and refrigeration systems. The cable is engineered for installations involving small shaft diameters or limited side‑view access, where NSv probes offer advantages over standard proximity transducer systems. Application Scenarios Centrifugal and process gas compressors Refrigeration compressors with limited mounting space Small‑shaft machinery requiring NSv‑specific monitoring High‑vibration or corrosive industrial environments Predictive maintenance and machinery protection systems FAQ Q: What makes this cable suitable for harsh environments Its stainless‑steel armor and FEP jacket provide mechanical and chemical protection in demanding applications. Q: Is this cable compatible with all NSv probes Yes. It integrates seamlessly with NSv probes and 3300 XL Proximitor sensors. Q: Why choose an NSv extension cable instead of a standard 5 mm or 8 mm cable NSv systems are designed for small‑shaft or space‑restricted installations where standard transducers cannot be used.
$200.00 $100.00
-
Bently Nevada Bently Nevada 330901‑00‑19‑10‑02‑00 3300 NSv Proximity Probe
Overview The Bently Nevada 330901‑00‑19‑10‑02‑00 proximity probe is part of the 3300 NSv series, engineered for precise non‑contact measurement of shaft vibration and position in compact or space‑restricted machinery. Its 5 mm tip design makes it ideal for installations where standard 8 mm probes cannot be accommodated, while still delivering the accuracy required for critical rotating equipment. Design and Construction This probe features a 1/4‑28 UNF threaded body with a 1.9‑inch case length and no unthreaded section, supporting secure mounting in tight mechanical envelopes. The 330901‑00‑19‑10‑02‑00 includes a 1.0‑meter molded cable terminated with a miniature coaxial ClickLoc connector, ensuring a stable, vibration‑resistant electrical interface. The non‑armored configuration provides flexibility for routing in confined spaces while maintaining full compatibility with NSv extension cables and Proximitor sensors. Technical Specifications Parameter Specification Model 330901‑00‑19‑10‑02‑00 Probe Type 3300 NSv 5 mm Proximity Probe Thread Type 1/4‑28 UNF Unthreaded Length 0.0 in Case Length 1.9 in Cable Length 1.0 m Connector Miniature coaxial ClickLoc Measurement Type Static position and dynamic vibration System Compatibility 3300 NSv / 3300 XL Proximity Transducer System Weight 0.38 kg Dimensions 20.5 × 22 × 3 cm HS Code 8537101190 Origin USA Minimum Order 1 unit Product Status Active System TSI Performance Characteristics The 330901‑00‑19‑10‑02‑00 provides a voltage output proportional to the distance between the probe tip and the target surface, enabling accurate gap and vibration measurements. It supports radial vibration, shaft position, Keyphasor reference, and speed measurement applications. Its compact geometry makes it particularly suitable for fluid‑film bearing machines and equipment with limited mounting space. The ClickLoc connector ensures secure engagement, preventing signal loss in high‑vibration environments. Application Scenarios Radial vibration monitoring on fluid‑film bearing machines Shaft position and displacement measurement Keyphasor phase reference and speed detection Compact machinery installations requiring 5 mm probes Predictive maintenance and machinery protection systems FAQ Q: Why choose a 5 mm probe instead of an 8 mm version It fits installations with limited mounting space while maintaining high measurement accuracy. Q: Is this probe compatible with NSv extension cables Yes. It integrates seamlessly with NSv and 3300 XL transducer components. Q: What monitoring functions does this probe support It supports vibration, displacement, Keyphasor reference, and speed measurement.
$200.00 $100.00
-
Bently Nevada Bently Nevada 330905‑00‑13‑05‑02‑05 3300 NSv Proximity Probe
Overview The Bently Nevada 330905‑00‑13‑05‑02‑05 proximity probe is part of the 3300 NSv series, engineered for precise non‑contact vibration and position measurement in machinery where installation space is limited. Its compact mechanical design, armored construction, and stable electrical characteristics make it suitable for high‑performance monitoring in demanding industrial environments. Design and Construction This probe features an M10×1 threaded body with a minimum case length of 13 mm, allowing installation in tight clearances such as centrifugal compressors and compact rotating equipment. The 330905‑00‑13‑05‑02‑05 includes a 0.5‑meter molded cable terminated with a miniature coaxial ClickLoc connector, ensuring a secure, vibration‑resistant electrical interface. The probe is built to withstand harsh operating conditions. Its IP67‑rated construction provides resistance to dust and water ingress, while the armored cable enhances mechanical durability in high‑vibration environments. Technical Specifications Parameter Specification Model 330905‑00‑13‑05‑02‑05 Probe Type 3300 NSv Proximity Probe Thread Type M10×1 Minimum Case Length 13 mm Cable Length 0.5 m Connector Miniature coaxial ClickLoc Protection Rating IP67 Power Requirements 9–32 V DC Measurement Type Radial vibration, thrust position, Keyphasor System Compatibility 3300 NSv / 3300 XL Proximity Transducer System Weight 0.14 kg Dimensions 20.3 × 22 × 3.5 cm HS Code 8537101190 Origin USA Minimum Order 1 unit Product Status Active System TSI Performance Characteristics The 330905‑00‑13‑05‑02‑05 delivers accurate gap‑to‑voltage conversion for both vibration and position monitoring. Its compact geometry supports installation in restricted spaces without compromising measurement accuracy. The probe’s non‑contact design eliminates mechanical wear, ensuring long‑term stability. With multiple international approvals and a wide operating temperature range, this NSv probe is suitable for oil and gas, petrochemical, and power generation environments. Its analog voltage output provides real‑time condition data for early fault detection and predictive maintenance. Application Scenarios Centrifugal compressor vibration monitoring Thrust position measurement in rotating machinery Keyphasor phase reference and speed detection High‑vibration environments requiring armored probes Predictive maintenance systems in energy and process industries FAQ Q: What makes this probe suitable for compact installations Its 13 mm minimum case length and M10×1 thread allow mounting in tight spaces without affecting measurement accuracy. Q: Is the probe suitable for harsh industrial environments Yes. Its IP67 rating and armored cable provide strong protection against dust, moisture, and mechanical stress. Q: What monitoring functions does this probe support It supports radial vibration, thrust position, and Keyphasor reference measurements.
$200.00 $100.00
-
Bently Nevada Bently Nevada 330101‑12‑30‑10‑02‑05 3300 XL Proximity Probe
Overview The Bently Nevada 330101‑12‑30‑10‑02‑05 proximity probe is part of the 3300 XL 8 mm transducer family, engineered for high‑accuracy non‑contact measurement of shaft vibration, displacement, and position in rotating machinery. Its robust construction and stable electrical characteristics make it suitable for continuous monitoring in demanding industrial environments. Design and Construction This probe features an 8 mm tip and a durable molded cable assembly designed for long‑term reliability. The 330101‑12‑30‑10‑02‑05 includes a miniature coaxial ClickLoc connector, which provides a secure, vibration‑resistant electrical interface and prevents accidental loosening during operation. The probe is designed for seamless integration with 3300 XL extension cables and Proximitor sensors, forming a complete eddy‑current transducer system capable of delivering consistent linearity and measurement accuracy. Technical Specifications Parameter Specification Model 330101‑12‑30‑10‑02‑05 Probe Type 3300 XL 8 mm Proximity Probe Measurement Type Static position and dynamic vibration Applications Axial position, differential expansion, rod position, Keyphasor Cable Type Molded coaxial cable Connector Miniature ClickLoc Certifications CSA, ATEX, IECEx Weight 0.06 kg Dimensions 112 × 1.5 × 1.2 cm HS Code 8537101190 Origin USA Minimum Order 1 unit Product Status Active System TSI Performance Characteristics The 330101‑12‑30‑10‑02‑05 supports a wide range of machinery protection functions, including axial position detection, differential expansion monitoring on steam turbines, and rod position measurement in reciprocating compressors. It also supports phase reference (Keyphasor) and zero‑speed detection applications. The probe is engineered to withstand harsh industrial environments and maintains stable performance across temperature variations and electromagnetic interference. Its compatibility with the entire 3300 XL system ensures easy upgrades and simplified maintenance. Application Scenarios Turbine axial position and differential expansion monitoring Compressor rod position measurement Keyphasor phase reference and speed detection Radial vibration and shaft displacement monitoring OEM and retrofit installations requiring 3300 XL compatibility FAQ Q: Is this probe compatible with older 3300 series components Yes. It integrates seamlessly with 3300 XL Proximitor sensors and extension cables. Q: What types of measurements can this probe support It supports vibration, displacement, axial position, differential expansion, and Keyphasor reference. Q: Does the ClickLoc connector improve reliability Yes. It ensures a secure, vibration‑resistant connection and maintains shielding integrity.
$200.00 $100.00
-
Bently Nevada Bently Nevada 330101‑00‑20‑05‑01‑05 3300 XL Proximity Probe
Overview The Bently Nevada 330101‑00‑20‑05‑01‑05 proximity probe is part of the 3300 XL 8 mm transducer system, engineered for accurate non‑contact measurement of shaft vibration and position in rotating machinery. Its compact mechanical design and stable electrical characteristics make it suitable for installations requiring short cable lengths and precise monitoring performance. Design and Construction This probe features a 3/8‑24 UNF threaded body with a minimum case length of 2.0 inches, allowing secure mounting in a wide range of machine configurations. The 330101‑00‑20‑05‑01‑05 includes a 0.5‑meter molded cable terminated with a miniature ClickLoc connector and connector protector, ensuring a secure, vibration‑resistant electrical interface. The non‑armored configuration provides flexibility for routing in confined spaces while maintaining full compatibility with 3300 XL extension cables and Proximitor sensors. Technical Specifications Parameter Specification Model 330101‑00‑20‑05‑01‑05 Probe Type 3300 XL 8 mm Proximity Probe Thread Type 3/8‑24 UNF Minimum Case Length 2.0 in Cable Length 0.5 m Connector Miniature coaxial ClickLoc with protector Measurement Type Static position and dynamic vibration System Compatibility 3300 XL Proximity Transducer System Certifications CSA, ATEX, IECEx Weight 0.1 kg Dimensions 2 × 1.5 × 112 cm HS Code 8537101190 Origin USA Minimum Order 1 unit Product Status Active System TSI Performance Characteristics The 330101‑00‑20‑05‑01‑05 supports full interchangeability with other 3300 XL probes, extension cables, and Proximitor sensors, eliminating the need for matched calibration. Its short cable length is ideal for installations where the probe must be mounted close to the Proximitor sensor or where cable routing is restricted. The probe is certified for hazardous‑area use and maintains stable performance in environments with high electromagnetic interference. Application Scenarios Turbine, compressor, and generator vibration monitoring Shaft displacement and axial position measurement Installations requiring short probe cable lengths Machinery protection systems using 3300 XL components Predictive maintenance programs in heavy industry FAQ Q: What makes this probe suitable for short‑distance installations Its 0.5‑meter cable reduces excess cable routing and improves installation flexibility. Q: Is this probe compatible with older 3300 series components Yes. It integrates seamlessly with the 3300 XL system and can replace non‑XL probes when installed correctly. Q: Does the ClickLoc connector improve reliability Yes. It prevents accidental loosening and maintains shielding integrity in high‑vibration environments.
$200.00 $100.00
-
Bently Nevada Bently Nevada 330930‑045‑03‑00 3300 NSv Extension Cable
Overview The Bently Nevada 330930‑045‑03‑00 extension cable is part of the 3300 NSv proximity transducer system and is designed to provide reliable signal transmission between NSv probes and associated monitoring hardware. Its 4.5‑meter length and non‑armored construction make it suitable for installations requiring flexibility, compact routing, and dependable electrical performance. Design and Construction This cable is supplied without stainless‑steel armor, allowing easier routing in confined spaces while maintaining robust electrical shielding. A connector protector is included to safeguard the miniature coaxial interface during installation and operation. The 330930‑045‑03‑00 uses high‑quality materials to ensure stable impedance and consistent signal integrity across the full operating range of NSv probes. The cable integrates seamlessly with NSv proximity probes and Proximitor sensors, forming a complete measurement chain for displacement and vibration monitoring in rotating machinery. Technical Specifications Parameter Specification Model 330930‑045‑03‑00 Cable Type 3300 NSv Extension Cable Length 4.5 m (14.8 ft) Armor None (non‑armored configuration) Connector Miniature coaxial with protector System Compatibility 3300 NSv / 3300 XL Proximity Transducer System Weight 0.04 kg Dimensions 1.3 × 1.1 × 6.5 cm HS Code 8537101190 Origin USA Minimum Order 1 unit Product Status Active System TSI Performance Characteristics The 330930‑045‑03‑00 maintains stable electrical characteristics over long cable runs, ensuring accurate displacement and vibration measurements. Its non‑armored design provides flexibility for routing through tight cable paths, while the connector protector reduces the risk of damage during installation. This cable is suitable for extending NSv probe connections in environments where mechanical protection from armor is not required but electrical reliability remains essential. Application Scenarios NSv probe installations requiring flexible cable routing Machinery protection systems for compressors, pumps, and turbines Applications where non‑armored cable is preferred for ease of installation Predictive maintenance systems using 3300 NSv components Replacement or extension of existing NSv probe cabling FAQ Q: Is this cable compatible with all NSv probes Yes. It supports both armored and unarmored NSv probe configurations. Q: Does the cable require special approvals No. The “00” suffix indicates that no additional agency approvals are required. Q: What is the purpose of the connector protector It shields the connector from mechanical damage and contamination during installation.
$200.00 $100.00
-
Bently Nevada Bently Nevada | 330780‑90‑05 | 3300 XL 11 mm Proximitor Sensor
Overview The Bently Nevada 330780‑90‑05 Proximitor Sensor is part of the 3300 XL 11 mm transducer family and is engineered for precise vibration and shaft position measurements in demanding rotating‑machinery applications. This model supports a total system length of 9.0 meters and is suitable for both panel‑mount and DIN‑rail installations, offering flexibility for compact or high‑density monitoring systems. Key Characteristics Model: 330780‑90‑05 Sensor Type: 3300 XL 11 mm Proximitor Sensor System Length: 9.0 m Mounting Options: DIN‑rail or panel mount Electrical Isolation: Integrated isolated mounting base Weight: 0.22 kg Dimensions: 8 × 6 × 6.5 cm Certifications: CSA, ATEX, IECEx Condition: New Functional Description The 330780‑90‑05 sensor forms the signal‑conditioning stage of the 3300 XL 11 mm proximity measurement system. It converts the raw eddy‑current probe signal into a calibrated voltage proportional to shaft displacement or vibration amplitude. Its mechanical design retains the traditional 4‑hole mounting footprint while incorporating an isolated base, eliminating the need for external insulating hardware. The sensor’s RFI/EMI performance meets CE requirements without requiring shielded conduit or metallic enclosures, enabling installation in fiberglass housings or compact monitoring cabinets. SpringLoc terminal strips allow rapid, tool‑free wiring and maintain secure electrical connections even under continuous vibration. With a sensitivity of 7.87 V/mm (200 mV/mil) ±3%, the 330780‑90‑05 provides accurate readings across a linear range of approximately 0.25–2.3 mm. Operating from a –24 V DC supply, it delivers stable performance in environments where electrical noise, temperature variation, and mechanical stress are common. Technical Specifications Mechanical Parameter Value Dimensions 8 × 6 × 6.5 cm Weight 0.22 kg Mounting DIN‑rail or panel mount Base Electrically isolated Electrical Parameter Value Sensitivity 7.87 V/mm (200 mV/mil) ±3% Linear Range 0.25–2.3 mm Input Power –24 V DC System Length 9.0 m Compatible Probes 3300 XL 11 mm series Environmental Parameter Value Certifications CSA, ATEX, IECEx RFI/EMI Immunity CE‑compliant without shielded conduit Operating Environment Industrial machinery monitoring systems Applications Turbines (steam, gas, hydro) Compressors and expanders Large industrial motors and generators Gearboxes and high‑speed rotating equipment API 670‑compliant protection systems FAQ Q: Can this sensor be used with 8 mm probes? A: No. It must be paired with 11 mm probes to maintain correct calibration and linearity. Q: Does the sensor require shielded conduit for CE compliance? A: No. Its RFI/EMI immunity meets CE standards without additional shielding. Q: Is the mounting base already isolated? A: Yes. The integrated isolation eliminates the need for separate isolator plates.
$200.00 $100.00
-
Bently Nevada Bently Nevada | 330104‑00‑16‑10‑02‑05 | 3300 XL 8 mm Proximity Probe
Overview The Bently Nevada 330104‑00‑16‑10‑02‑05 proximity probe belongs to the 3300 XL 8 mm transducer family and is designed for precise shaft vibration and displacement measurements in rotating machinery. This model includes armored cable protection and a 1.6‑meter probe assembly length, making it suitable for installations exposed to mechanical stress, oil contamination, or elevated temperatures. Key Characteristics Model: 330104‑00‑16‑10‑02‑05 Probe Type: 8 mm proximity probe with armored cable Thread Specification: M10 × 1 Probe Length: 1.6 m Connector: Miniature coaxial ClickLoc System Compatibility: 3300 XL Proximity Transducer System Certifications: CSA, ATEX, IECEx Weight: 0.06 kg Dimensions: 115 × 2 × 1.5 cm Functional Description The 330104‑00‑16‑10‑02‑05 probe uses an eddy‑current sensing coil encapsulated in a molded PPS plastic tip, providing enhanced resistance to oil ingress, moisture, and mechanical wear. The armored cable construction protects the probe from abrasion and crushing forces, making it suitable for harsh industrial environments such as turbine decks, compressor housings, and pump skids. This model is fully compatible with other components in the 3300 XL system, including extension cables and Proximitor sensors. Because the system is factory‑matched, no bench calibration is required when replacing or interchanging components. The probe’s shielding and internal design provide strong immunity to RFI/EMI interference, allowing installation in non‑metallic housings while maintaining CE compliance. Its compact form factor supports both DIN‑rail and panel‑mounted monitoring systems. Technical Specifications Mechanical Parameter Value Probe Tip Diameter 8 mm Thread Type M10 × 1 Probe Length 1.6 m Cable Type Armored coaxial Connector Miniature ClickLoc Weight 0.06 kg Shipping Dimensions 115 × 2 × 1.5 cm Electrical Parameter Value Sensitivity 7.87 V/mm (200 mV/mil) typical Linear Range 2 mm (80 mil) Frequency Response DC to 10 kHz System Compatibility 3300 XL Proximitor sensors Grounding Single‑point shield grounding recommended Environmental Parameter Value Operating Temperature –35°C to +177°C (probe only) Humidity 95% non‑condensing Certifications CSA, ATEX, IECEx RFI/EMI Immunity CE‑compliant without shielded conduit Applications Turbines (steam, gas, hydro) Compressors and expanders Industrial pumps and motors Gearboxes and high‑speed rotating equipment API 670‑compliant vibration protection systems FAQ Q: Does this probe require calibration after installation? A: No. The probe, extension cable, and Proximitor sensor are factory‑matched and do not require bench calibration. Q: Can this probe be used in oil‑rich environments? A: Yes. The armored cable and PPS‑encapsulated tip provide excellent resistance to oil and moisture. Q: Is it interchangeable with other 3300 XL 8 mm probes? A: Yes. All 3300 XL 8 mm probes are designed for full interchangeability within the system.
$200.00 $100.00
-
Bently Nevada Bently Nevada | 330710‑000‑050‑02‑00 | 3300 XL 11 mm Proximity Probe
Overview The Bently Nevada 330710‑000‑050‑02‑00 probe is part of the 3300 XL 11 mm proximity transducer family, designed for applications requiring extended linear range and robust mechanical construction. This model supports high‑accuracy displacement and vibration measurements in heavy‑duty rotating machinery, particularly where larger probe tip diameters are preferred for improved signal stability. Key Characteristics Model: 330710‑000‑050‑02‑00 Probe Type: 11 mm proximity probe System Compatibility: 3300 XL Proximity Transducer System Thread Specification: M14 × 1.5 (corrected for 11 mm series) Cable Length: 5 m standard Connector: Miniature coaxial ClickLoc Mounting Options: DIN‑rail or panel‑mount compatible Electrical Isolation: Integrated isolated mounting base Weight: 0.25 kg Dimensions: 20.5 × 22.5 × 3.5 cm Functional Description The 330710‑000‑050‑02‑00 probe is engineered for machinery protection systems that demand high linearity and stable performance across wide temperature and electromagnetic ranges. Its 11 mm tip diameter provides a larger sensing footprint, improving measurement reliability in applications with significant shaft runout or surface irregularities. The probe assembly incorporates a fully isolated mounting base, eliminating the need for external insulating plates. This reduces installation time and ensures consistent grounding practices across multi‑channel systems. Enhanced RFI/EMI immunity allows the probe to meet CE requirements without metallic conduit or shielded enclosures. This makes it suitable for installations in fiberglass housings or compact monitoring panels. The 5‑meter armored cable, terminated with a ClickLoc connector, provides secure attachment to extension cables and Proximitor sensors. SpringLoc terminal strips support fast wiring without specialized tools, improving serviceability in field environments. Technical Specifications Mechanical Parameter Value Probe Tip Diameter 11 mm Thread Type M14 × 1.5 Cable Length 5 m Cable Type Armored coaxial Connector Miniature ClickLoc Mounting Base Electrically isolated Weight 0.25 kg Shipping Dimensions 20.5 × 22.5 × 3.5 cm Electrical Parameter Value Sensitivity 7.87 V/mm (200 mV/mil) typical Linear Range 4 mm (160 mil) typical for 11 mm series Frequency Response DC to 10 kHz System Compatibility 3300 XL Proximitor sensors Grounding Single‑point shield grounding recommended Environmental Parameter Value Operating Temperature –35°C to +177°C (probe only) Humidity 95% non‑condensing Certifications CSA, ATEX, IECEx RFI/EMI Immunity CE‑compliant without shielded conduit Applications Large steam and gas turbines High‑power compressors Industrial generators Gearboxes and heavy rotating equipment API 670‑compliant protection systems FAQ Q: Does the 11 mm probe require a different Proximitor than the 8 mm series? A: Yes. The 11 mm probe must be paired with the corresponding 3300 XL 11 mm Proximitor to maintain calibration accuracy. Q: Can this probe be mounted in non‑metallic housings? A: Yes. Its RFI/EMI immunity meets CE requirements without metallic conduit. Q: Is the mounting base already isolated? A: Correct. No additional isolation hardware is required.
$200.00 $100.00
You have seen 696 out of 729 products