The PACSystems RX3i & RX7i series provides advanced, modular PLC solutions. These systems offer scalable performance, high-speed communication, and robust reliability, ideal for complex industrial automation projects.
GE PACSystems RX3i & RX7i
-
General Electric GE IC694DNM200 PACSystems RX3i DeviceNet Master Module
Product Description The IC694DNM200 by GE / Emerson is a DeviceNet Master module engineered for PACSystems RX3i and Series 90‑30 PLC platforms. It enables a PLC CPU to interface with DeviceNet networks as a master, supporting up to 63 slave devices. The module handles all standard DeviceNet messaging types, including polled, cyclic, strobe, and change-of-state (COS) connections, and can operate as a DeviceNet slave if required. Designed for single-slot installation on the CPU baseplate, the module provides an RS‑232 service port for firmware upgrades and diagnostic tasks. Three front-panel LEDs indicate network power, module status, and network health for straightforward system monitoring. Technical Specifications Module Type DeviceNet Master with optional slave capability Platform Compatibility PACSystems RX3i (CPU version 3.5 or later) Series 90‑30 (excluding CPUs IC693CPU321/340 with certain firmware versions) Communication Features DeviceNet protocol support Maximum of 63 DeviceNet slave devices Input per slave: 255 bytes Output per slave: 255 bytes Total data capacity: Up to 3972 bytes input / output Baud rates: 125 kbps, 250 kbps, 500 kbps Supported connection types: Polled, Cyclic, Strobe, COS Ports 1 × DeviceNet Master port 1 × RS‑232 service port (firmware, diagnostics) Power Requirements Backplane load: 450 mA @ 5 VDC (~2.25 W) Indicators Network Power LED Module Status LED Network Status LED Environmental Specifications Operating temperature: 0°C to +60°C Storage temperature: –40°C to +85°C Physical Dimensions Dimensions: 89 × 107 × 188 mm Weight: 0.4 lbs Key Features Master for up to 63 DeviceNet nodes Supports explicit messaging and fragmented I/O Configurable behavior on communication loss Firmware upgradeable via RS‑232 port Optional slave operation Compatible with distributed I/O architectures Applications DeviceNet network management for PLC systems Distributed I/O connectivity in manufacturing or process plants Integration with sensors, actuators, and networked devices FAQ Q: How many DeviceNet nodes can the module manage?A: The IC694DNM200 supports up to 63 DeviceNet slave devices. Q: Can it function as a DeviceNet slave?A: Yes, the module can optionally operate as a slave if network topology requires it. Q: What diagnostics capabilities are available?A: RS‑232 service port allows firmware updates, configuration, and network diagnostics.
$200.00 $100.00
-
General Electric GE IC698PSD300 PACSystems RX7i Power Supply Module
Product Description The IC698PSD300 by GE is a high-capacity industrial power supply module engineered for PACSystems RX7i and selected VersaMax racks. Designed to provide stable, regulated DC power, this module supports CPUs, communication modules, and I/O assemblies in demanding industrial applications. Technical Specifications Electrical Input Options AC Input Version (VersaMax) Voltage: 85–264 VAC, 50/60 Hz Power Factor: ≥0.95 Efficiency: Up to 92% DC Input Version (RX7i) Voltage: 125 VDC nominal (range 100–150 VDC) Maximum Current: 4 A at full load Low-Voltage DC Input (RX7i) Voltage: 18–30 VDC Output Capabilities Single-Output VersaMax Version Voltage: 24 VDC Current: 10 A (240 W) Multi-Output RX7i Version +5 VDC: 10 A +12 VDC: 2 A –12 VDC: 1 A Total Output Power: 300 W RX7i 125 VDC Input Version Outputs: +5 VDC, +24 VDC, +12 VDC auxiliary Total Output Power: 300 W Protection Features Overcurrent, overvoltage, and short-circuit protection Overtemperature shutdown Reverse-polarity protection (DC versions) Industrial-grade reliability Mechanical & Environmental Operating Temperature: 0°C to +50°C (AC), 0°C to +60°C (RX7i) Storage Temperature: –40°C to +85°C Relative Humidity: 5–95% non-condensing Cooling: Internal fan or forced-air depending on version Hot-Swap Capable: Yes Mounting: RX7i or VersaMax racks Physical Dimensions Dimensions: 101.6 × 152.4 × 76.2 mm Weight: 4.87 lbs Applications Oil & Gas automation Power generation control systems Manufacturing process automation Mission-critical industrial control networks FAQ Q: Can the IC698PSD300 be hot-swapped without shutting down the rack?A: Yes, all variants support hot-swap operation for uninterrupted system maintenance. Q: Which output configuration is suitable for high-density I/O systems?A: The multi-output RX7i version is recommended for racks requiring +5 VDC, +12 VDC, and –12 VDC simultaneously. Q: Is this module compatible with VersaMax AC and RX7i DC racks?A: Yes, specific versions are designed for each platform. Ensure correct input type selection.
$200.00 $100.00
-
General Electric GE IC694MDL231 RX3i 8-Point 240 VAC Isolated Input Module
Product Description The IC694MDL231 is a precision-engineered 8-channel AC input module for the PACSystems RX3i platform, designed to handle high-voltage 240 VAC signals with individual channel isolation. Each input point has its own common terminal, allowing independent power sources and enhanced protection for complex industrial applications. Key Features 8 discrete AC inputs, each fully isolated for independent operation Positive logic configuration; ON state detected when voltage is present Reactive RC input circuitry for noise suppression and stable signal acquisition Green LED per channel for immediate status monitoring Hot-swappable in any standard RX3i I/O slot (excluding CPU/power supply slots) Red high-voltage warning bands for safety compliance Electrical Specifications Rated Input Voltage: 240 VAC Voltage Range: 0–264 VAC Operating Frequency: 50/60 Hz ON-State Voltage: 148–264 VAC (guaranteed) OFF-State Voltage: 0–40 VAC (guaranteed) Typical Input Current: 15 mA per channel Minimum ON-State Current: 6 mA Maximum OFF-State Current: 2.2 mA Response Time: ≤ 30 ms ON / ≤ 45 ms OFF Isolation: 250 VAC continuous (field-to-backplane and channel-to-channel), 1500 VAC for 60 seconds (field to frame) Input Circuit: Reactive RC filtering Mechanical and Environmental Dimensions: 34 × 145 × 140 mm Weight: 0.82 lbs Operating Temperature: 0–60°C Mounting: Standard RX3i rack Certifications: UL 508, CSA, Class I Div 2 (Groups A–D) Power Requirements Backplane Current Draw: 60 mA @ 5 VDC (all channels active) Applications The IC694MDL231 is suitable for interfacing with 240 VAC field devices such as pushbuttons, limit switches, relays, and contactors. Ideal for process automation, factory control systems, and distributed monitoring applications where independent channel isolation is critical. FAQ Q: Can this module be used with lower-voltage AC signals?A: No, it is designed specifically for 240 VAC operation. Q: Is hot-swapping supported?A: Yes, hot insertion and removal are supported on RX3i universal backplanes. Q: How is channel isolation implemented?A: Each input has its own isolated common terminal, with 250 VAC continuous isolation and 1500 VAC temporary field-to-frame isolation.
$200.00 $100.00
-
General Electric GE IC694MDL260 PACSystems RX3i 32-Point Discrete Input Module
Product Description The IC694MDL260 is a high-performance 32-channel AC discrete input module engineered for the PACSystems RX3i platform. It provides reliable 120 VAC signal detection for a wide range of industrial control applications, offering robust isolation and diagnostic feedback. Key Features and Functionality 32 discrete input points organized into 4 isolated groups, 8 channels per group Positive logic: ON state recognized when voltage is applied High isolation between groups: 1500 VAC typical; shared common reference within groups Hot-swap capable on RX3i Universal Backplane Individual LEDs for each input channel plus red/green terminal block status indicators Supports diagnostic reporting of field-side terminal block presence Electrical Specifications Nominal Input Voltage: 120 VAC Input Voltage Range: 0–132 VAC Input Frequency: 47–63 Hz ON-State Voltage: 70–132 VAC OFF-State Voltage: 0–20 VAC Typical Input Current: 7 mA per channel at rated voltage Response Time: ~30 ms ON / 45 ms OFF Input Filter Times: 20–2540 ms, configurable in 20 ms increments Backplane Current Draw: 220 mA @ 5 VDC Environmental Specifications Operating Temperature: 0–50°C Weight: 0.95 lbs Compatibility Platform: PACSystems RX3i Required Firmware: Version 3.50 or later Terminal Blocks (sold separately): IC694TBB032, IC694TBB132 (box-style); IC694TBS032, IC694TBS132 (spring-style) Applications Ideal for AC sensor interfaces, switch monitoring, contactor state detection, and other binary input systems in manufacturing, process automation, and industrial control. FAQ Q: Can this module be used with Series 90-30 PLCs?A: No, the IC694MDL260 is exclusive to PACSystems RX3i CPUs. Q: Does it support hot swapping?A: Yes, hot insertion and removal are fully supported on the RX3i Universal Backplane. Q: How is input isolation handled?A: Each group of 8 inputs shares a common reference, while isolation exists between groups for up to 1500 VAC.
$200.00 $100.00
-
General Electric GE Fanuc IC694MDR390 RX3i 32-Point Relay Output Module
Product Description The IC694MDR390 is a 32-channel relay output module for the GE Fanuc RX3i PACSystem, designed to control a wide range of discrete devices including solenoids, contactors, indicator lamps, and motor starters. Each output provides isolated relay contacts with high current capacity, ensuring reliable operation in demanding industrial environments. The module features optical isolation, LED diagnostics for every channel, and a compact form factor for flexible integration into RX3i I/O slots. This module is engineered for rugged applications, delivering both AC and DC load control while maintaining mechanical durability and electrical safety. It is ideal for manufacturing, process automation, and machine control systems requiring multiple relay outputs in a single module. Technical Specifications Specification Details Model IC694MDR390 Product Type Relay Output Module Series RX3i PACSystem Output Channels 32 points Output Type Form A (normally open) relay contacts Rated Voltage 24 VDC / 120 VAC / 240 VAC (load dependent) Contact Rating 2 A per channel (resistive) Isolation Optical isolation between field wiring and backplane Response Time Operate: ~15 ms; Release: ~15 ms Indicators 32 individual green LEDs showing output status Installation Fits any RX3i I/O slot Protection Relay contacts designed for long mechanical life Operating Temperature 0°C to +60°C Storage Temperature -40°C to +85°C Weight 1.0 lbs Inrush Rating 5 A per channel Max Backplane Draw 6 mA @ 5 VDC Key Features High-density relay outputs: 32 channels in a single module conserve rack space. AC/DC load versatility: Supports inductive and resistive loads for mixed-voltage applications. Channel LEDs: Instant visual indication of each output’s status for diagnostics. Optical isolation: Protects PLC backplane from voltage spikes and electrical noise. Rugged design: Mechanically durable relay contacts ensure long service life. Applications Switching solenoids, pilot lights, and motor starters. Manufacturing and assembly line automation. Process control systems where multiple isolated outputs are required. Mixed AC/DC control applications in industrial environments. FAQ Q: How many relay outputs does IC694MDR390 provide?A: 32 isolated relay outputs. Q: What types of loads can it handle?A: AC and DC loads, including resistive and inductive devices. Q: Are there visual indicators for output status?A: Yes, each channel has a dedicated green LED. Q: Does it offer electrical isolation?A: Yes, optical isolation separates field wiring from the PLC backplane. Q: Which slots are compatible for installation?A: Any RX3i I/O slot.
$200.00 $100.00
-
General Electric GE Fanuc IC694MDL732 RX3i 32-Point Positive Logic Input Module
Product Description The IC694MDL732 is a 32-channel positive logic input module designed for the GE Fanuc RX3i PACSystem. It provides reliable digital signal acquisition from field devices such as sensors, switches, and push buttons, delivering real-time status to the PLC controller. Engineered for dense installations, it combines high channel count with optical isolation, LED diagnostics, and wide voltage tolerance for robust industrial operation. Technical Specifications Specification Details Model IC694MDL732 Product Type Discrete Input Module Series RX3i PACSystem Input Points 32 channels Logic Type Positive logic (ON = high voltage) Nominal Voltage 12/24 VDC Voltage Range (On-State) 10.2 – 30 VDC Voltage Range (Off-State) 0 – 5 VDC Input Current ~7 mA per channel On-State Current Minimum 2 mA Off-State Current Maximum 1 mA Response Time On: 7 ms; Off: 7 ms Isolation Optical isolation between inputs and backplane Indicators 32 green LEDs showing individual channel status Installation Fits any RX3i I/O slot Operating Temperature 0°C to +60°C Storage Temperature -40°C to +85°C Weight 1.36 kg Power Consumption 50 mA typical Output Ratings 0.5 A per point, 12–24 VDC Inrush Current 4.78 A per 10 ms Key Features High-density input: 32 points in a single module reduce rack footprint. Positive logic simplifies wiring and digital signal interpretation. LED indicators provide immediate visual status of each input. Optical isolation protects the PLC backplane from noise and voltage spikes. Supports both 12 VDC and 24 VDC signals for flexible deployment. Applications Large discrete input monitoring in manufacturing lines and assembly systems. Process control systems with multiple low-voltage field signals. Environments requiring high reliability and quick diagnostics in noisy industrial settings. FAQ Q: How many input channels does IC694MDL732 provide?A: It provides 32 digital input channels. Q: What voltage range does the module support?A: It supports 12/24 VDC nominal, with 10.2–30 VDC for ON-state and 0–5 VDC for OFF-state. Q: Does it provide visual diagnostics?A: Yes, each channel has a dedicated LED indicator. Q: Is the module isolated?A: Yes, optical isolation separates the field inputs from the backplane. Q: Where can this module be installed?A: It can be installed in any RX3i I/O slot.
$200.00 $100.00
-
General Electric GE Fanuc IC694MDL442 Discrete I/O Module RX3i PACSystem
Product Description The IC694MDL442 is a discrete input/output module designed for the GE Fanuc RX3i PACSystem. It provides reliable 24 VDC digital I/O for monitoring and controlling field devices such as sensors, switches, and actuators. Built for harsh industrial environments, the module offers high-speed data acquisition, built-in diagnostics, and fault detection, ensuring system reliability and operational efficiency. Technical Specifications Specification Details Model IC694MDL442 Product Type Discrete Input/Output Module Series RX3i PACSystem Input Voltage 24 VDC Communication Protocol Modbus TCP/IP and other industrial protocols Data Acquisition High-speed digital signal processing Diagnostics Built-in real-time monitoring and fault detection Operating Temperature -40°C to +70°C Dimensions 100 × 80 × 20 mm Mounting Compact design for easy installation Reliability Rugged construction for extreme environments Industrial Applications Suitable for steel plants, water treatment, and heavy machinery Key Features High-speed data acquisition for fast and accurate signal processing. Integrated diagnostics for real-time monitoring and fault detection. Wide operating temperature range from -40°C to +70°C. Supports Modbus TCP/IP and other industrial protocols for flexible integration. Compact form factor simplifies installation and reduces space requirements. Rugged design ensures reliable performance in extreme conditions. Applications Monitoring and control of sensors, switches, and actuators in industrial environments. Steel production lines, water treatment plants, and heavy industry automation. Systems requiring reliable low-voltage I/O with diagnostic capabilities. Integration into diverse automation networks with Modbus TCP/IP compatibility. FAQ Q: What voltage does IC694MDL442 operate on?A: The module operates on 24 VDC. Q: Can it be integrated with Modbus TCP/IP systems?A: Yes, it supports Modbus TCP/IP and other common industrial communication standards. Q: What is the operating temperature range?A: The module functions reliably from -40°C to +70°C. Q: Does it have built-in diagnostics?A: Yes, real-time status monitoring and fault detection are included. Q: What are typical use cases?A: Heavy industrial environments such as steel mills, water treatment, and factory automation.
$200.00 $100.00
-
General Electric GE Fanuc IC694MDL634 8-Point 24VDC Discrete Input Module RX3i
Product Description The IC694MDL634 is an 8-channel discrete input module designed for the GE Fanuc RX3i PACSystem. It supports both positive and negative logic and provides optical isolation between the field devices and the PLC backplane. Each input has an LED status indicator, allowing for quick diagnostics of discrete signals such as switches, sensors, and push buttons. The module operates under industrial-grade conditions and fits into any RX3i I/O slot, making it ideal for scalable system expansions. Technical Specifications Specification Details Model IC694MDL634 Product Type Discrete Input Module Series RX3i PACSystem Input Points 8 channels Logic Type Positive or Negative selectable Nominal Voltage 24 VDC Voltage Range (On-State) 11.5 to 30 VDC Voltage Range (Off-State) 0 to 5 VDC Input Current ~7 mA at rated voltage On-State Current Minimum 3.2 mA Off-State Current Maximum 1.1 mA Response Time On: ~7 ms, Off: ~7 ms Isolation Optical, 250 VAC continuous, 1500 VAC for 1 min Indicators 8 green LEDs indicating ON/OFF status Installation Any RX3i I/O slot Power Consumption 45 mA from 5V bus, 62 mA from 24V supply Operating Temperature 0°C to 60°C (32°F to 140°F) Storage Temperature -40°C to 85°C Humidity 5% to 95%, non-condensing Vibration 10–57 Hz, 0.0524 mm displacement; 57–500 Hz, 1.0 g acceleration Shock 15 G, 11 ms Weight 0.75 lbs Key Features Supports both positive and negative logic inputs for flexible field integration. LED indicators for each input simplify troubleshooting and diagnostics. Optical isolation protects the PLC backplane from electrical noise or surges. Compact design fits into any RX3i I/O slot for easy system expansion. Blue band labeling identifies safe low-voltage operation. Applications Monitoring limit switches, push buttons, and sensors in industrial systems. Machine automation and process control where multiple discrete signals must be tracked. Manufacturing facilities requiring reliable low-voltage input modules. Systems where PLC protection from voltage surges is critical. FAQ Q: Can IC694MDL634 handle both positive and negative logic signals?A: Yes, the module supports selectable positive or negative logic for all 8 channels. Q: What type of isolation does this module provide?A: It offers optical isolation, 250 VAC continuous and 1500 VAC for 1 minute, protecting the PLC backplane. Q: Can it be installed in any RX3i I/O slot?A: Yes, it is compatible with any RX3i I/O slot, allowing flexible system integration. Q: How many LEDs indicate input status?A: Each of the 8 input channels has a dedicated green LED for real-time monitoring. Q: Are there alternative modules for more input points?A: Yes, for larger applications, GE Fanuc offers modules like IC694MDL645 with 16 discrete inputs.
$200.00 $100.00
-
General Electric GE IC694ALG391 RX3i 2-Channel Analog Output Module
Product Description The IC694ALG391 is a dual-channel analog output module for the PACSystems RX3i platform, designed to convert PLC digital values into precise current or voltage signals. Each channel supports 0–20 mA, 4–20 mA, 0–5 V, and 1–5 V output ranges, providing flexible control options for actuators, valves, drives, and other analog devices. Equipped with 12‑bit DACs, the module offers fast 5 ms update rates and ±8 µA (current) or ±50 mV (voltage) accuracy, ensuring responsive and high-precision control. Optical isolation per channel protects the system from electrical noise and ground loops. Users can configure the module to Hold Last State or default to 0/4 mA when the CPU stops, providing safe operation under fault or shutdown conditions. The IC694ALG391 is certified for hazardous and marine environments, making it suitable for demanding industrial applications. It mounts easily on RX3i racks or panels/DIN rails, supporting rapid installation and maintenance. Technical Specifications Parameter Specification Manufacturer GE Fanuc / Emerson Model IC694ALG391 Product Line PACSystems RX3i Product Type Analog Output Module Channels 2 analog outputs Current Output 0–20 mA, 4–20 mA (jumper-selectable) Voltage Output 0–5 V, 1–5 V (jumper/resistor-selectable) Resolution 12-bit Update Rate ~5 ms per channel Absolute Accuracy ±8 µA (4–20 mA), ±10 µA (0–20 mA), ±50 mV (voltage) Compliance Voltage 25 VDC max Load Resistance 0–850 Ω (current), ≥2 kΩ (voltage) Load Capacitance 2000 pF max Load Inductance 1 H max Power Requirements +5 VDC backplane: 30 mA; +24 VDC isolated: 215 mA Isolation 250 VAC continuous, optical per channel Default/Hold State Jumper-selectable Operating Temperature –10 °C to 60 °C Storage Temperature –40 °C to 85 °C Certifications UL, UL HazLoc, CE, ATEX Zone 2, ABS, BV, DNV, GL, KRS, LR Mounting RX3i rack, panel, or DIN-rail Dimensions 101.6 × 152.4 × 127 mm Weight 0.64 lbs Key Features & Advantages Dual-channel 12-bit analog output for precise control Supports both current (0–20 mA, 4–20 mA) and voltage (0–5 V, 1–5 V) outputs Fast 5 ms update rate for responsive system performance Optical isolation per channel enhances noise immunity and safety Configurable Hold Last State or default output on CPU STOP Suitable for valves, drives, actuators, and process automation Certified for hazardous and marine applications Applications Actuator and valve control in process industries Drive or motor analog signal output Remote control of analog field devices Hazardous or marine environments requiring high-reliability I/O FAQ Q: Can the IC694ALG391 output both voltage and current simultaneously?A: No, each channel must be configured for either current or voltage output using jumpers or resistor settings. Q: What happens to outputs if the CPU stops?A: The module can be configured to Hold Last State or default to 0/4 mA for safe shutdown. Q: Is this module suitable for marine or hazardous locations?A: Yes, it carries UL HazLoc, ATEX, and multiple marine certifications.
$200.00 $100.00
-
General Electric GE IC694ALG232 RX3i 16-Channel High-Density Analog Input Module
Product Description The IC694ALG232 is a 16-channel high-density analog voltage input module designed for the PACSystems RX3i platform. It accommodates both unipolar (0–10 V) and bipolar (–10 V to +10 V) voltage ranges and delivers precise 16-bit resolution for high-accuracy monitoring applications. Channels can be configured as 16 single-ended or 8 differential inputs, enabling flexible deployment in noise-sensitive industrial environments. With conversion times of 5 ms for single-ended or 3 ms for differential channels, the IC694ALG232 offers fast signal processing and minimal latency. It includes comprehensive diagnostics for overrange, underrange, and channel health, as well as hot-swap capability for reduced downtime. The module is compatible with Proficy Machine Edition for configuration and monitoring. Its rugged construction and industrial certifications, including UL, UL HazLoc Zone 2, CE, ATEX, ABS, BV, DNV, GL, KRS, and LR, make it suitable for harsh process control, utilities, and marine applications. Technical Specifications Parameter Specification Model IC694ALG232 Manufacturer GE Fanuc / Emerson Product Line RX3i PacSystem Product Type High-Density Analog Input Module Weight 1.06 lbs Input Channels 16 SE / 8 DI Input Voltage Range 0–10 V (unipolar), –10 V to +10 V (bipolar) Resolution 16-bit (0.3125 mV/count) Conversion Time 5 ms SE / 3 ms DI Update Rate 5 ms SE / 3 ms DI for all channels Input Impedance >500 kΩ SE, >1 MΩ DI Filtering 23 Hz SE, 38 Hz DI Power Requirements +5 VDC Backplane: 112 mA; +24 VDC User Supply: 110 mA (for Universal Backplane) Diagnostics Overrange/Underrange, Channel Health Monitoring Mounting RX3i rack (panel or DIN-rail) Terminal Type 20-screw terminal block included Hot-Swap Support Yes Operating Temperature 0–60 °C Storage Temperature –40–85 °C Humidity 5–95% non-condensing Certifications UL, UL HazLoc Zone 2, CE, ATEX C1D2, ABS, BV, DNV, GL, KRS, LR Key Features & Advantages High-density 16-channel analog voltage input for versatile monitoring 16-bit resolution with fast conversion (5 ms SE / 3 ms DI) for precision applications Configurable single-ended or differential channels for noise-sensitive installations Advanced diagnostics: overrange, underrange, and channel health monitoring Hot-swappable design minimizes downtime Broad industrial certifications for hazardous and marine environments Applications Process control in manufacturing and utilities Marine systems requiring precise analog monitoring High-speed, high-accuracy signal acquisition in industrial automation Integration with PACSystems RX3i platforms for scalable control solutions FAQ Q: Can the IC694ALG232 operate in both single-ended and differential modes?A: Yes, it can function as 16 single-ended or 8 differential channels. Q: What is the conversion speed per channel?A: 5 ms for single-ended and 3 ms for differential channels. Q: Is this module hot-swappable?A: Yes, it supports hot-swap for minimal system downtime.
$200.00 $100.00
-
General Electric GE IC693DNM200 Series 90-30 DeviceNet Master Module
Product Description The IC693DNM200 is a DeviceNet Master/Scanner module designed for the GE Fanuc Series 90‑30 PLC family, providing Class 2 Master functionality. It allows a PLC to communicate with up to 63 DeviceNet slave devices, including drives, motor starters, remote I/O blocks, and sensors, effectively integrating distributed field devices as if they were local I/O. The module handles all DeviceNet network traffic automatically, scans slave devices, and maps input/output data directly into the PLC memory tables, simplifying programming and reducing wiring complexity. The IC693DNM200 installs in a single Series 90‑30 rack slot (all except slots 0 and 1) and includes a 5‑pin DeviceNet terminal block for network connections and an RS‑232 service port for configuration, diagnostics, and firmware updates. LED indicators display module, network, and I/O activity for quick troubleshooting. With support for Poll, Strobe, Cyclic, and Change-of-State messaging, this module provides flexible and high-speed communication for large DeviceNet networks. Technical Specifications Parameter Specification Model IC693DNM200 Manufacturer GE Fanuc / Emerson Product Line Series 90‑30 Product Type DeviceNet Master/Scanner Module Weight 0.44 lbs Max DeviceNet Nodes Up to 63 slave devices Master Type Class 2 Master / Scanner Supported Baud Rates 125K, 250K, 500K bps (auto-sense/configurable) I/O Connections per Slave 2 connections per slave Data per Slave 255 input bytes / 255 output bytes Total I/O Data 3972 input bytes / 3972 output bytes Supported Messaging Poll, Strobe, Cyclic, Change-of-State (COS) Rated Voltage 12–24 VDC (positive logic) Backplane Current Draw 450 mA @ 5 VDC typical Inrush Current 5.4 A for 10 ms Isolation 2.5 kV optical isolation Module Width Single slot (Series 90‑30 form factor) Ports DeviceNet 5‑pin terminal, RS‑232 service port Status Indicators Module Status, Network Status, I/O Activity LEDs ON/OFF Response Time 0.5 ms max Operating Temperature 0 °C to 60 °C Storage Temperature –40 °C to +85 °C Compatible PLCs Series 90‑30 (slots 2+), PACSystems RX3i Key Features & Advantages Class 2 DeviceNet Master supports up to 63 nodes Direct mapping of DeviceNet I/O to PLC memory for easy integration High-speed communication at 125K/250K/500K bps Flexible messaging: Poll, Strobe, Cyclic, Change-of-State LED diagnostics for module, network, and I/O activity Compact single-slot design, installs in standard Series 90‑30 racks Applications Large distributed I/O networks requiring centralized PLC control Monitoring and control of motors, drives, and sensors over DeviceNet Integration of remote I/O systems with Series 90‑30 or RX3i PLCs Industrial automation systems needing real-time network communication FAQ Q: How many DeviceNet slave devices can this module manage?A: The IC693DNM200 supports up to 63 slave devices. Q: Can it communicate with RX3i PLCs?A: Yes, it is compatible with PACSystems RX3i racks. Q: What communication speeds are supported?A: 125K, 250K, and 500K bps, configurable or auto-sensed.
$200.00 $100.00
-
General Electric GE IC694ALG220 RX3i 4-Channel Analog Voltage Input Module
Product Description The IC694ALG220 is a 4-channel analog input module for the PACSystems RX3i platform, engineered for precise voltage and current signal acquisition. Each channel supports –10 V to +10 V voltage inputs, with the ability to accept 4–20 mA current inputs through jumper selection, providing versatile analog monitoring options. Designed for high-speed, accurate measurements, the module features 1 ms per-channel conversion, 16-bit resolution, and factory calibration. It delivers strong noise immunity, with over 80 dB cross-channel rejection, making it ideal for monitoring process variables such as temperature, pressure, flow, and level. IC694ALG220 requires isolated +24 VDC when installed in a Universal Backplane and mounts easily in any RX3i I/O slot. LED indicators provide quick diagnostic feedback. The module is not hot-swappable and should be powered down before removal. Technical Specifications Parameter Specification Model IC694ALG220 Manufacturer GE Fanuc / Emerson Product Line PACSystems RX3i Product Type 4-Channel Analog Voltage Input Module Weight 0.57 lbs Number of Channels 4 analog inputs Voltage Input Range –10 V to +10 V Current Input Option 4–20 mA (jumper-selectable) Input Impedance (Voltage) >9 MΩ Input Resistance (Current) 250 Ω Conversion Speed 1 ms per channel Update Rate 4 ms for all channels Resolution 16-bit 2’s complement Accuracy Typical ±10 mV / 40 μA Accuracy Max ±30 mV / 160 μA over temperature Linearity High linearity with factory calibration Power Consumption 5 VDC: 27 mA, 24 VDC: 98 mA External Power Isolated +24 VDC via TB1 if in Universal Backplane Isolation 250 VAC continuous, 1500 VAC 1 min (field ↔ backplane) Operating Temperature 0 °C to 60 °C Storage Temperature –40 °C to 85 °C Humidity 5–95% non-condensing Mounting RX3i rack (any I/O slot) Terminal Type Screw-type terminal block Shielding Twisted, shielded instrumentation cable supported Indicators Module OK LED Key Features & Advantages 4 independent analog inputs, supporting voltage and current High-speed 1 ms/channel conversion for real-time monitoring Factory-calibrated for precise measurements Strong noise immunity with >80 dB cross-channel rejection LED status indicators for fast diagnostics Flexible mounting in any RX3i I/O slot Applications Industrial process monitoring: temperature, pressure, flow, level Signal acquisition in distributed control systems Systems requiring mixed voltage and current inputs Environments needing accurate, high-speed analog measurements FAQ Q: Can the module handle current inputs?A: Yes, 4–20 mA current inputs are supported via jumper configuration. Q: Is the module hot-swappable?A: No, the IC694ALG220 must be powered down before removal. Q: What is the maximum input voltage?A: The module supports –10 V to +10 V per channel.
$200.00 $100.00
-
General Electric GE IC694ALG390 RX3i 2-Channel Analog Voltage Output Module
Product Description The IC694ALG390 is a precision 2-channel analog voltage output module engineered for the PACSystems RX3i platform. Designed for high-performance industrial control, it delivers accurate –10 V to +10 V signals for actuators, valves, drives, and other analog devices. Each channel provides 13-bit resolution, a 5 ms update rate, and full channel-to-channel isolation, ensuring low-noise operation in demanding environments. The module offers advanced diagnostics, configurable Hold-Last-State or Default output on CPU stop or reset, and is hot-swappable to minimize downtime during maintenance. It is certified for UL, CE, ATEX Zone 2, UL HazLoc, and marine standards, making it suitable for hazardous and offshore applications. Technical Specifications Parameter Specification Model IC694ALG390 Manufacturer GE Fanuc / Emerson Product Line PACSystems RX3i Product Type 2-Channel Analog Voltage Output Module Weight 0.48 kg (1.06 lbs) Number of Channels 2 Isolated Voltage Outputs Output Range –10 V to +10 V Resolution 13-bit (~2.5 mV per count) Update Rate 5 ms per channel Output Load ≥2 kΩ, max 5 mA Output Load Capacitance Up to 2000 pF Isolation Channel-to-channel: 250 VAC continuous, 1500 VAC 1 min Power Consumption +5 VDC 32 mA, +24 VDC 120 mA External Supply Optional 18–30 VDC, ripple ≤10% LED Indicators Module and channel status Environmental Rating 0 °C to 60 °C operating, –40 °C to 85 °C storage, 5–95% RH Certifications UL, UL HazLoc, CE, ATEX Zone 2, ABS, BV, DNV, GL, KRS, LR Mounting RX3i rack system Terminal Block Included, 20-screw type Hot-Swap Supported Key Features & Advantages 13-bit high-resolution voltage outputs for precise control Fast 5 ms update speed suitable for real-time automation Channel-to-channel isolation for noise immunity Configurable default or Hold-Last-State on CPU stop/reset Advanced diagnostics with LED indicators Hot-swappable design for minimal system downtime Certified for hazardous locations and marine use Applications Controlling analog actuators, valves, and drives in process and discrete automation Hazardous industrial environments including ATEX Zone 2 and UL HazLoc Offshore and marine automation requiring certified modules Systems needing high-speed, accurate analog outputs with diagnostics FAQ Q: What is the output voltage range of the module?A: Each channel delivers –10 V to +10 V with 13-bit resolution. Q: Can the module be replaced without shutting down the system?A: Yes, IC694ALG390 is hot-swappable. Q: What certifications does it have for safety compliance?A: UL, CE, UL HazLoc, ATEX Zone 2, ABS, BV, DNV, GL, KRS, LR.
$200.00 $100.00
-
General Electric GE IC695GCG001 RX3i Genius Communications Gateway Module
Product Description The IC695GCG001 is a high-performance Genius Communications Gateway designed for the PACSystems RX3i platform. It bridges modern PROFINET networks with legacy Genius I/O devices, allowing industrial operators to upgrade controllers without replacing existing Genius infrastructure. This module supports mission-critical applications, offering high reliability, redundancy, and advanced diagnostics. The gateway accommodates up to 31 Genius devices, features dual Ethernet ports (RJ-45, 10/100 Mbps) for flexible network topologies, and supports Genius Hot Standby and Duplex Redundancy. It also provides configurable I/O update rates from 2 ms to 512 ms and ensures seamless integration with RX3i controllers running firmware 8.15 or later. Compact and robust, the IC695GCG001 operates in temperatures from 0 °C to 60 °C and is hot-swappable, allowing maintenance or replacement without disrupting system operations. Technical Specifications Parameter Specification Model IC695GCG001 Manufacturer GE Fanuc / Emerson Product Line PACSystems RX3i Product Type Genius Communications Gateway Weight ~0.4 kg (0.88 lbs) Operating Temperature 0 °C to 60 °C Input Power 24 VDC, 0.19 A max Ethernet Ports 2 × RJ‑45, 10/100 Mbps Genius Bus Support 1 bus, up to 31 devices I/O Data Capacity 1024 bytes IN / 1024 bytes OUT I/O Update Rate Configurable: 2–512 ms Communication Protocols PROFINET v2.3 Class A, RTC, RTA, DCP, CL-RPC, LLDP, MRP, SNMP Redundancy Genius Hot Standby, Duplex Redundancy HHM Compatibility IC660HHM501 Hand-Held Monitor Mounting RX3i Universal Backplane Hot-Swap Supported (with external power disconnect) Key Features & Advantages Bridges PROFINET networks to legacy Genius I/O systems Supports up to 31 Genius devices per gateway Dual Ethernet ports for star or daisy-chain topologies Advanced diagnostics with LED indicators Hot-swappable for zero-downtime maintenance Redundant Genius bus capable using two gateways Compact design for RX3i backplane integration Applications Modernizing legacy Genius I/O systems without hardware replacement Process control and discrete automation networks Industrial facilities upgrading to PROFINET-based controllers High-availability systems requiring bus redundancy FAQ Q: How many Genius devices can the gateway support?A: The IC695GCG001 supports up to 31 Genius devices depending on bus configuration. Q: Which RX3i CPUs are compatible?A: Compatible CPUs include CPE330, CPE302, CPE305, CPE310 (firmware 8.15+), CPU315, CPU320, CRU320, and CPE400 embedded PROFINET. Q: Is the module hot-swappable?A: Yes, it can be replaced without system shutdown, provided external power is disconnected.
$200.00 $100.00
-
General Electric GE IC695ALG106 RX3i 6-Channel Isolated Analog Input Module
Product Description The IC695ALG106 is a versatile 6-channel isolated analog input module engineered for the PACSystems RX3i platform. Each channel offers individual isolation and can be configured for a broad spectrum of voltage and current inputs, providing high accuracy and signal integrity in demanding industrial applications. This module supports hot-swap installation, enabling maintenance or replacement without powering down the system. It features open-circuit detection, per-channel alarms, and diagnostic capabilities. A high-capacity front-mounted terminal block (sold separately) is required for wiring. Fully software-configurable, the module ensures flexible operation for complex control systems. Technical Specifications Parameter Specification Model IC695ALG106 Manufacturer GE Fanuc / Emerson Product Type Isolated Analog Input Module Platform PACSystems RX3i Number of Channels 6 individually isolated Supported Signals Voltage & Current Voltage Ranges ±10 V, 0–10 V, ±5 V, 0–5 V, 1–5 V Current Ranges 0–20 mA, 4–20 mA, ±20 mA Input Impedance (Voltage) 500 kΩ Input Resistance (Current) 250 Ω ±1% Open-Circuit Detection Yes Resolution 16-bit ADC (IEEE 32-bit float or 16-bit integer) Filter Options 8 Hz, 12 Hz, 16 Hz, 40 Hz, 250 Hz, 1000 Hz Sample Rate 1 ms per channel Settling Time ~1.7 ms to 0.1% final value Accuracy ±0.1% at 25 °C; ±0.2% full range Isolation 250 VAC continuous; 1500 VAC for 1 min Backplane Power (5 V) 230 mA max Backplane Power (3.3 V) 320 mA max Max Power Dissipation 2.97 W Mounting RX3i Universal Backplane Terminal Block Front-mounted (sold separately) Weight 0.55 lbs Product Status Active Key Features & Advantages Six fully isolated analog channels for voltage and current measurement Software-configurable for flexible control system integration Open-circuit detection and per-channel diagnostics Hot-swappable for zero-downtime maintenance High-precision 16-bit ADC with configurable output formats Wide filter and sample rate options for noise reduction and signal smoothing Robust isolation ensures protection from ground loops and electrical interference Applications Industrial process control and monitoring Data acquisition in power generation, water treatment, and manufacturing Integration with RX3i PACSystems controllers for critical analog signal management FAQ Q: Can the module be replaced while the system is running?A: Yes, the IC695ALG106 supports hot-swap installation for maintenance without powering down the RX3i system. Q: What types of signals can it measure?A: The module handles both voltage (±10 V, 0–10 V, ±5 V, 0–5 V, 1–5 V) and current (0–20 mA, 4–20 mA, ±20 mA) inputs. Q: Is a terminal block included?A: No, a high-capacity front-mounted terminal block is required and must be ordered separately.
$200.00 $100.00
-
General Electric GE IC695ACC403 | RX3i Extended-Life Energy Pack Module
Product Description The IC695ACC403 is an extended-life energy backup module designed for the PACSystems RX3i platform, providing reliable power support for CPUs including the CPE330, CPE400, and CPL410 during power interruptions. It preserves critical user memory, system state, and process data, ensuring safe operation and data integrity in industrial environments. Equipped with industrial-grade capacitors, the module offers a typical operational lifespan of up to 5 years and can recharge fully in approximately 10 minutes. Hot-swappable installation allows maintenance or replacement without shutting down the system. Self-diagnostic LEDs provide real-time monitoring of input power, output status, and charging state. Technical Specifications Parameter Specification Model IC695ACC403 Manufacturer GE Fanuc / Emerson Product Type Extended-Life Energy Pack Module Platform PACSystems RX3i Input Voltage 18–30 VDC Backup Output Voltage 24 VDC nominal Backup Trip Voltage 19 VDC ±4% Power Rating 72 W SELV Current Rating 2.3 A Charging Time ~10 minutes to full charge Capacitor Lifespan 5 years @ 0–50 °C; 4.5 years @ 60 °C Operating Temperature –25 °C to 60 °C Storage Temperature –40 °C to 85 °C Humidity 5–95% non-condensing Certifications UL 508, CE Mark (EMC, LVD) Mounting DIN rail or panel mount Dimensions 114 × 77 × 64 mm Weight 0.7 lbs Clearance Minimum 25.4 mm for heat dissipation Status Indicators LED: IN, STAT, OUT Hot-Swap Support Yes Key Features & Advantages Provides backup power for RX3i CPUs to prevent data loss during outages Long-life capacitors offer up to 5 years of reliable service Fast recharge (~10 minutes) ensures rapid readiness after power restoration Hot-swappable design minimizes downtime during maintenance Wide operating temperature range suitable for demanding industrial sites Self-diagnostic LEDs for real-time status monitoring Certified for global industrial use (UL, CE) Applications Continuous memory preservation for RX3i controllers in process automation Oil & gas, power generation, pharmaceutical, and manufacturing industries Critical systems where safe shutdown and data integrity are mandatory FAQ Q: How long can the module maintain backup during power loss?A: The IC695ACC403 provides sufficient energy to preserve CPU memory and system state, typically lasting several minutes depending on the CPU load. Q: Can it be installed while the system is running?A: Yes, the module supports hot-swap installation with no system shutdown required. Q: Is the module suitable for high-temperature environments?A: Yes, it operates safely from –25 °C to 60 °C, with reduced lifespan if sustained near the upper limit.
$200.00 $100.00
-
General Electric GE IC695ECM850 RX3i IEC 61850 Ethernet Communication Module
Product Description The IC695ECM850 is a high-performance Ethernet communication module for the PACSystems RX3i platform, enabling controllers to connect seamlessly to IEC 61850 electrical substation networks. Designed as an IEC 61850 client, it exchanges real-time data with protection relays, meters, and other intelligent electronic devices (IEDs). This module supports both copper and fiber media, providing four switched Ethernet ports—two RJ‑45 and two SFP cages—for flexible network topologies. Fully hot‑swappable, the IC695ECM850 allows maintenance or replacement without system downtime, making it ideal for mission-critical power automation applications. Configuration is supported via micro-USB or Proficy Machine Edition 8.0 SIM7, and it works with RX3i CPUs running firmware 8.05 or higher. Technical Specifications Parameter Specification Model IC695ECM850 Manufacturer GE Fanuc / Emerson Product Type Ethernet Communication Module Platform PACSystems RX3i Ethernet Ports 2 × RJ‑45, 2 × SFP cages (copper, single/multi-mode fiber) Data Rates 10/100/1000 Mbps USB Port 1 × Micro-USB for configuration/CLI access IP Addresses per Module 1 MAC Addresses per Module 5 Supported Devices Up to 32 IEC 61850 devices I/O Update Rate Configurable 100 ms to 64 s Max I/O Memory 12,072 points + 20,000 events Max Modules per RX3i CPU 4 Hot-Swappable Yes SNTP Support Yes Power Requirements 3.3 VDC: 0.5–1.2 A, 5 VDC: up to 1.5 A Operating Temperature 0 °C to 60 °C (derates to 57 °C with certain SFPs) Dimensions 13.0 cm × 16.0 cm × 2.0 cm Weight 1.0 lb Backplane Support RX3i Universal Backplane (PCI bus) Certifications IEC 61850 compliant Key Features & Advantages Direct IEC 61850 connectivity for substation automation systems Four switched Ethernet ports for flexible network design Supports copper and fiber without external converters Hot-swappable design minimizes downtime Large event buffer with 20,000 events for advanced diagnostics Compatible with multiple RX3i CPUs and Proficy Machine Edition Applications Electrical substations for protection and metering integration Utility networks requiring IEC 61850 communication Power generation systems with real-time data reporting Industrial automation requiring high-speed, deterministic Ethernet FAQ Q: Can the module handle both fiber and copper simultaneously?A: Yes, two RJ‑45 ports and two SFP cages allow simultaneous copper and fiber connectivity. Q: Is the module hot-swappable?A: Yes, the IC695ECM850 can be replaced without interrupting RX3i operations. Q: How many devices can it communicate with?A: Supports up to 32 IEC 61850 devices per module.
$200.00 $100.00
-
General Electric GE IC694CEE001 RX3i CEP Expansion Carrier PROFINET I/O Module
Product Description The IC694CEE001 is a Communication Expansion Processor (CEP) expansion carrier for the PACSystems RX3i platform. Designed to attach to the IC694CEP001 module, it provides one additional RX3i I/O slot, enabling a remote PROFINET I/O node to host a second I/O module. This allows distributed nodes to support higher I/O density while maintaining high availability and low-latency communication. Equipped with an integrated 10/100 Mbps RJ‑45 Ethernet interface, the IC694CEE001 distributes 24 VDC / 700 mA to downstream I/O modules. The carrier supports PROFINET I/O communication, module scanning, fault reporting, and full diagnostics. Its compact DIN-rail-compatible design ensures flexible installation in control cabinets and distributed I/O clusters. Technical Specifications Parameter Specification Model IC694CEE001 Manufacturer GE Fanuc / Emerson Product Line RX3i PACSystems Module Type CEP Expansion Carrier Function Adds one expansion slot to remote RX3i I/O node Compatible Host IC694CEP001 required Total Supported Slots 2 (1 on CEP001 + 1 on CEE001) Weight 0.26 kg (0.56 lbs) Input Voltage 24 VDC from host CEP001 Current Capacity 700 mA for downstream modules Ethernet Interface 1× RJ‑45, 10/100 Mbps Communication Protocol PROFINET I/O (IO‑Device) I/O Data Capacity 32 input bits + 32 output bits Supported Topologies Daisy-chain, star, ring (redundant media) USB Port Firmware updates only (WinLoader) Mounting DIN-rail or panel Indicators LEDs for power, network, and module health Operating Temperature 0–60 °C Storage Temperature –40–85 °C Humidity 5–95% non-condensing Protection Rating IP20 (indoor use) Key Features & Advantages Expands a remote PROFINET node to host two RX3i I/O modules Integrated 10/100 Mbps Ethernet interface for fast communication Supplies 700 mA power to additional downstream modules Supports full module scanning, I/O state management, and fault reporting Compatible with redundant network topologies for high availability Compact, DIN-rail-friendly design for flexible installation in cabinets Applications Distributed RX3i PROFINET I/O networks Remote I/O clusters requiring expansion beyond a single module High-availability automation systems with redundancy requirements Industrial control cabinets where space-efficient expansion is needed FAQ Q: Can the module function independently?A: No, IC694CEE001 must be attached to a host IC694CEP001 carrier. Q: How much power can it provide to downstream modules?A: Up to 700 mA at 24 VDC. Q: Does it support redundant network topologies?A: Yes, it supports daisy-chain, star, and ring configurations.
$200.00 $100.00
-
General Electric GE IC695CEP001 RX3i CEP PROFINET Carrier Module
Product Description The IC695CEP001 is a dedicated Communication Expansion Processor (CEP) carrier for the PACSystems RX3i platform, enabling a remote I/O node to connect directly to a PROFINET network. Functioning as a PROFINET Version 2.3 Class A IO‑Device, this module allows a single RX3i I/O module—or two when used with the IC694CEE001 expansion carrier—to operate as a full remote PROFINET station. Equipped with dual 10/100Base‑TX Ethernet ports and a micro-USB interface for firmware updates, the IC695CEP001 manages I/O scanning, publishes and receives data to/from a PROFINET IO‑Controller, and provides comprehensive diagnostics. Its compact design supports flexible mounting and reliable operation in industrial environments. Technical Specifications Parameter Specification Model IC695CEP001 Manufacturer GE Fanuc / Emerson Product Line RX3i PACSystems Module Type CEP Carrier for PROFINET PROFINET Support Version 2.3, Class A IO‑Device Ethernet Ports 2× RJ‑45, 10/100Base‑TX, switched, shielded USB Interface 1× Micro‑USB, firmware updates only I/O Data Capacity 512 bytes input + 512 bytes output (1024 bytes total) Max Modules per Station 1 (single CEP) Supported Topologies Daisy-chain, star, ring (redundant media) Input Voltage 24 VDC (range: 19.2–30 VDC) Power Consumption 5.25 W (0.22 A @ 24 VDC) Mounting DIN-rail or panel Dimensions 177 × 51 × 35 mm (6.98 × 2.01 × 1.38 in) Weight 0.55 lbs Operating Temperature 0–60 °C Compliance IEC 61131‑2, CE, RoHS Key Features & Advantages Compact PROFINET communication interface for RX3i systems Dual Ethernet ports for flexible network topologies, including ring redundancy Micro-USB port for firmware updates and maintenance 512-byte I/O capacity per direction for high-density remote I/O Comprehensive LED indicators for power, module status, connection, and Ethernet activity Supports hot insertion/removal, similar to RX3i backplane modules Robust diagnostics and fault reporting for reliable industrial operation Applications Remote I/O nodes in PROFINET networks Distributed control systems requiring Class A IO‑Device connectivity Industrial automation requiring high-density I/O with redundancy support Flexible network architecture deployments including daisy-chain, star, and ring topologies FAQ Q: Can the module be used with more than one I/O module?A: Yes, when paired with IC694CEE001, it can support two I/O modules per PROFINET station. Q: How is firmware updated?A: Firmware updates are performed via the Micro-USB port using WinLoader software. Q: Does it support redundant networks?A: Yes, it supports ring topology and PROFINET-based CPU redundancy.
$200.00 $100.00
-
General Electric GE IC695ALG112 RX3i 12-Channel Isolated Analog Input Module
Product Description The IC695ALG112 is a high-precision 12-channel isolated analog input module designed for the PACSystems RX3i platform. Each channel is independently isolated, allowing safe and reliable measurement of mixed voltage and current signals in demanding industrial environments. This module supports configurable voltage and current ranges, per-channel diagnostics, open-circuit detection, and multiple alarm settings. Its hot-swap capability allows installation or removal without shutting down the backplane, minimizing downtime. The IC695ALG112 is ideal for process plants, utilities, OEM machinery, and distributed I/O systems requiring high-integrity analog data acquisition. Technical Specifications Parameter Specification Model IC695ALG112 Manufacturer GE Fanuc / Emerson Product Line RX3i PACSystems Module Type Isolated Analog Input Module Number of Channels 12 Input Signal Types Voltage & Current Voltage Ranges ±10 V, 0–10 V, ±5 V, 0–5 V, 1–5 V Current Ranges 0–20 mA, 4–20 mA, ±20 mA Input Impedance 500 kΩ (Voltage), 250 Ω ±1% (Current) Resolution 16-bit ADC, IEEE 32-bit float or 16-bit integer Digital Filters 8 Hz, 12 Hz, 16 Hz, 40 Hz, 250 Hz, 1000 Hz Alarm Types High, Low, High-High, Low-Low, Rate-of-Change Open-Circuit Detection Yes, ~1 second response Backplane Power 5 VDC: 490 mA max; 3.3 VDC: 310 mA max Max Power Dissipation 4.89 W (all channels at 20 mA) Slot Requirement Single RX3i backplane slot Terminal Blocks (ordered separately) IC694TBB032, IC694TBB132 (box); IC694TBS032, IC694TBS132 (spring) Hot-Swap Supported Operating Temperature 0–60 °C Storage Temperature –40–85 °C Humidity 5–95% non-condensing Weight 0.81 lbs Key Features & Advantages 12 individually isolated channels for mixed analog signals Flexible voltage and current range selection per channel Hot-swappable design for minimal system downtime Built-in diagnostics and per-channel alarm detection Configurable scaling, offsets, and digital filtering Suitable for harsh industrial environments and long cable runs Applications Process control plants (chemical dosing, pumps, compressors) Power generation monitoring (temperature, vibration, lube-oil) Water & wastewater systems (pressure, flow, and level transmitters) OEM machinery with mixed voltage/current feedback requirements Distributed I/O systems in electrically noisy environments FAQ Q: Can the module be inserted while the system is powered?A: Yes, the IC695ALG112 is hot-swappable, allowing installation or replacement without powering down the backplane. Q: What accuracy can be expected over time?A: Calibrated accuracy is ±0.1% at 25 °C and ±0.2% across the full temperature range. Periodic calibration adjustments are recommended. Q: Which terminal blocks are compatible?A: Compatible blocks include IC694TBB032, IC694TBB132 (box style) and IC694TBS032, IC694TBS132 (spring style).
$200.00 $100.00
-
General Electric GE IC698CRE040 RX7i CPU Module with Redundant Ethernet
Product Description The IC698CRE040 is a high-speed CPU module for the GE/Emerson PACSystems RX7i platform, engineered for complex, large-scale industrial control systems. It functions as the central processor, executing user logic, managing local and remote I/O, coordinating communications, and supporting hot-standby redundancy for mission-critical applications. Equipped with a 1.8 GHz Pentium‑M processor, 64 MB battery-backed RAM, and 64 MB non-volatile flash memory, the IC698CRE040 delivers fast logic execution and reliable data storage. Dual 10/100 Mbps Ethernet ports enable redundant or segmented network configurations, while supporting SRTP, Modbus TCP, EGD, and serial protocols. Integration with the VME64 backplane allows compatibility with legacy RX7i and Series 90-70 modules. Designed for high-availability applications such as process automation, power generation, and transportation, this CPU module provides seamless switchover with hot-standby redundancy when paired with the IC698RMX016 Redundancy Memory Xchange module. Onboard web and FTP server functionality supports diagnostics and remote monitoring. Key Technical Specifications Parameter Specification Model IC698CRE040 Manufacturer GE Fanuc / Emerson Product Line RX7i PACSystems CPU Type Pentium‑M Clock Speed 1.8 GHz RAM 64 MB battery-backed Flash Memory 64 MB non-volatile Boolean Scan Rate 0.024 ms per 1000 contacts/coils Ethernet Ports 2× 10/100 Mbps RJ45 (redundant/segmented) Ethernet Protocols SRTP, Modbus TCP Server/Client, EGD Serial Ports RS‑232, RS‑485 (SNP, Modbus RTU Slave, Serial I/O) Station Manager Port 1× dedicated port Web/FTP Sessions Up to 16 simultaneous Backplane Standard VME64 (ANSI/VITA 1) Local I/O Capacity Up to 16 modules Redundancy Hot-standby supported (requires IC698RMX016) Switchover Time Instantaneous with redundancy module Power Requirements +5 VDC: 6.8 A; +12 VDC: 0.003 A; –12 VDC: 0.003 A Operating Temperature 0 °C to 60 °C Storage Temperature –40 °C to 85 °C Humidity 5–95% non-condensing Form Factor Single-slot RX7i module Weight 1.50 lbs Indicators Power, Run, Fault, Battery, Ethernet, Redundancy LEDs Functional Highlights High-speed 1.8 GHz Pentium‑M CPU for demanding control tasks Dual Ethernet ports for redundant or daisy-chain networking Supports SRTP, Modbus TCP, EGD, SNP, and Modbus RTU protocols Hot-standby redundancy for mission-critical operations VME64 backplane integration with RX7i and legacy Series 90-70 modules 64 MB RAM and 64 MB flash memory for large program execution Built-in web/FTP server for diagnostics, monitoring, and data retrieval Typical Applications Distributed control systems requiring high-speed logic execution Process automation in power generation, oil & gas, and transportation Redundant control architectures for critical uptime requirements Integration with existing RX7i or Series 90-70 PLC racks FAQ Q: Does the CPU support hot-standby redundancy?A: Yes, when used with the IC698RMX016 Redundancy Memory Xchange module. Q: Which protocols are supported for communication?A: SRTP, Modbus TCP Server/Client, EGD, SNP, Modbus RTU, RS‑232, RS‑485. Q: Can this module be integrated with legacy systems?A: Yes, the VME64 backplane allows compatibility with RX7i and Series 90-70 modules.
$200.00 $100.00
-
General Electric GE IC695CBL001 RX3i Energy Pack Connection Cable
Product Description The IC695CBL001 is a 0.91-meter (3-foot) Energy Pack Cable designed for the Emerson/GE PACSystems RX3i platform. It provides a secure connection between RX3i Energy Packs, such as IC695ACC400 or IC695EPU001, and compatible CPUs including CPE302, CPE305, and CPE310. This connection allows the Energy Pack to deliver stored energy during power loss, enabling the CPU to save critical data such as configuration files, process parameters, and user logic to non-volatile memory. Engineered for industrial reliability, the cable features straight-through wiring, industrial-grade shielding, and an integrated termination resistor for stable signal transmission in electrically noisy environments. Its compact design simplifies integration in control cabinets and ensures consistent operation in high-integrity systems. Key Technical Specifications Parameter Specification Model IC695CBL001 Manufacturer GE / Emerson Product Line PACSystems RX3i Cable Type Energy Pack Cable Length 0.91 m (3 ft) Conductor 24 AWG stranded Voltage Rating 24 VDC, 125 VDC, 120–240 VAC Current Rating Up to 3.8 A @ 95°C Wiring Straight-through end-to-end Termination Resistor Built-in EMI Shielding Industrial-grade for high-noise environments Operating Temperature 0°C to 60°C Compliance EU RoHS Directive 2011/65/EU Connector Type CPU and Energy Pack ports (8-pin male/female) Cable Construction Shielded with industrial insulation Energy Pack Compatibility IC695ACC400, IC695EPU001 CPU Compatibility IC695CPE302, CPE305, CPE310 Functional Highlights Ensures reliable energy transfer during power loss to prevent data corruption Connects RX3i Energy Packs to compatible CPUs securely Built-in termination resistor supports stable communication Shielded cable construction protects against EMI and industrial noise Compact 3-foot length ideal for cabinet-level connections Typical Applications Backup-power interface for PACSystems RX3i CPUs High-integrity industrial control systems requiring safe data storage during power interruptions Retrofit or maintenance of RX3i installations with Energy Packs FAQ Q: Can this cable be used with any RX3i CPU?A: It is compatible with RX3i CPUs that support Energy Pack connections, including CPE302, CPE305, and CPE310. Q: Does the cable include a termination resistor?A: Yes, the IC695CBL001 has a built-in termination resistor for reliable signal transmission. Q: What is the maximum operating temperature?A: The cable operates reliably from 0°C to 60°C (32°F to 140°F).
$200.00 $100.00
-
General Electric GE Fanuc IC695ACC302 RX3i Auxiliary Smart Battery Module
Product Description The IC695ACC302 is an advanced auxiliary battery module for PACSystems RX3i and RX7i CPUs, providing extended backup for volatile RAM memory. Its integrated smart monitoring circuitry allows the CPU to detect low battery conditions early, preventing unexpected data loss. Designed for long-term reliability, this module replaces standard coin-cell or lithium backup batteries and connects directly to the CPU with the included enabling adapter cable. Key Features Extends RAM backup time up to 200 days depending on CPU load and ambient temperature Smart monitoring circuit provides early Low Battery detection Uses a 3-cell lithium battery pack (3 VDC, 15 Ah) with a long shelf life (~7 years at 20°C) Includes internal 1‑amp fuse for protection against short circuits or overload Connects via 4-pin female JAE connector with included enabling adapter cable External mounting module, compatible with RX3i and RX7i CPU battery terminals Must be installed after CPU is powered ON to maximize battery life Technical Specifications Battery Characteristics Battery Type: 3-cell lithium pack Output Voltage: 3 VDC Capacity: 15 Ah Lithium Content: 5.1 g total (1.7 g per cell) Shelf Life: ~7 years at 20°C Total Backup Time: 23–200 days (dependent on CPU and operating conditions) Mechanical & Physical Dimensions: 145.1 × 65.0 × 39.9 mm (5.713 × 2.559 × 1.571 in) Weight: 0.74 lb Housing Material: Flame-retardant ABS Connector: 4-pin female JAE Included Cable: 4-pin enabling adapter cable (male-to-female) Environmental Operating Temperature: 0°C to +60°C Storage Temperature: Recommended 20°C for long-term shelf life Hazardous Locations: Not for use in explosive or hazardous environments Safety & Protection Internal 1‑amp sealed fuse (non-serviceable) Do not short-circuit, crush, disassemble, or expose to fire Follow MSDS and proper battery disposal guidelines Installation Notes Install the battery only after CPU power-on Disconnect enabling cable when not in use to preserve battery life Replace existing RAM backup batteries when installing this module Typical Applications Extended volatile memory backup for RX3i and RX7i CPUs Critical process control systems requiring uninterrupted RAM data retention Systems where early low-battery alerts improve operational reliability FAQ Q: What CPUs are compatible with IC695ACC302?A: Compatible with PACSystems RX3i and RX7i series CPUs. Q: How long does the battery last?A: Backup time ranges from 23 to 200 days depending on CPU load and operating temperature. Q: Does the module include monitoring features?A: Yes, it provides a smart Low Battery signal to the CPU before the battery is fully depleted. Q: Is installation possible while CPU is powered off?A: No, the module should be installed after CPU is powered ON to maximize battery life.
$200.00 $100.00
-
General Electric GE Fanuc IC694PWR330 RX3i Power Supply Module High-Capacity
Product Description The IC694PWR330 is a 30‑Watt high-performance power supply module designed for the PACSystems RX3i Serial Expansion Backplane. It delivers reliable, regulated DC power for logic circuits, relay loads, and isolated 24 VDC devices. With wide AC/DC input compatibility, robust protection features, and clear LED status indicators, this module ensures stable operation in diverse industrial environments. Key Features Supports AC input 85–264 VAC or DC input 100–300 VDC for global compatibility Provides three independent outputs: +5 VDC for logic, +24 VDC for relays, and isolated +24 VDC for sensitive modules Equipped with overvoltage, overcurrent, undervoltage, and short-circuit protection Includes 1500 VAC isolation between input and backplane LED indicators for Power, OK, and Run status Designed for single-slot installation; power must be removed before servicing Compatible with RX3i expansion backplanes for distributed rack configurations Technical Specifications Input Characteristics Nominal Input Voltage: 120/240 VAC or 125 VDC Input Voltage Range: 85–264 VAC / 100–300 VDC Maximum Input Power: 100 VA (AC), 50 W (DC) Inrush Current: 4 A peak, 250 ms Output Characteristics Output Voltage Range Maximum Power Notes +5 VDC 5.0–5.2 VDC 30 W Logic and backplane power +24 VDC Relay 24–28 VDC 15 W Relay load modules +24 VDC Isolated 21.5–28 VDC 20 W Input modules and external devices Total Capacity — 30 W combined All outputs share total limit Protection & Performance Isolation: 1500 VAC, input to backplane, 1 minute Overvoltage Protection: 5 VDC shuts down at ~6.4–7 V Overcurrent Protection: 5 VDC limited to 7 A, auto shutdown/restart Ride-through Time: ≥20 ms during power interruptions Fuse: 2 A internal fuse (44A724627‑109) Mechanical & Environmental Mounting: Single-slot in RX3i serial expansion backplane Operating Temperature: 0°C to 60°C Storage Temperature: –40°C to +85°C Humidity: 5–95% non-condensing Wiring: 14–22 AWG, two wires per terminal Certifications: UL, CE, ATEX, CCC, Marine (ABS, DNVGL) Weight: 1.19 lbs Typical Applications Providing reliable auxiliary power to RX3i distributed expansion racks Industrial automation systems with mixed relay and logic loads Systems requiring isolated 24 VDC outputs for noise-sensitive devices Environments demanding global AC/DC compatibility and robust protection FAQ Q: Can IC694PWR330 be hot-swapped?A: No, power must be removed before installation or servicing. Q: What isolation does it provide?A: 1500 VAC isolation between input and backplane for safety and noise immunity. Q: Which outputs are provided?A: +5 VDC for logic, +24 VDC for relays, and isolated +24 VDC for sensitive modules. Q: What input ranges are supported?A: AC 85–264 V or DC 100–300 V, covering global power standards.
$200.00 $100.00
You have seen 24 out of 146 products