Explore a full range of industrial automation products from major brands like ABB, Bently, Honeywell, GE, and more. IndustriaX Limited helps manufacturers source rare and hard-to-find components worldwide with fast delivery to minimize downtime.
15 in stock
Delivery within 48 hours, pay afterwards
Mid weeks Monday to friday we offer next day delivery if the product is on stock and exceptions on holidays.
Weekends We offer no deliveries in the weekends.
International Depending on where you’re located, we offer next day delivery. Check your status on this link
ABB PM858K02 3BSE082896R1 AC 800M Processor Unit
The ABB PM858K02 3BSE082896R1, also cataloged as the PM858K02 Processor Unit, operates as a dedicated hardware component for CPU execution and redundant controller communication within the ABB AC 800M Control Network. It provides MPC866 processing, RAM memory management, Ethernet communication, serial interfaces, and CPU redundancy functions for System 800xA automation platforms.
Hardware Specifications
Parameter
Specification
Model
PM858K02 3BSE082896R1
Brand
ABB
Product Type
CPU Processor Unit
System Platform
AC 800M / System 800xA
Origin
Sweden
Weight
2700 g including base
Dimensions
Width 119 mm, Height 186 mm, Depth 135 mm
Operating Temp
0 to +55 deg C
Storage Temp
-40 to +70 deg C
Power Consumption
5.1 W typical, 8.6 W maximum
Processor Type
MPC866
Clock Frequency
33 MHz
Memory
16 MB
RAM Available for Application
7.147 MB
Flash Memory
4 MB firmware storage
Redundancy Support
CPU, CEX-Bus, communication interfaces, and S800 I/O redundancy
Ethernet Ports
2 x RJ45 Ethernet ports
Ethernet Interface
IEEE 802.3, 10 Mbit/s
Control Network Protocol
MMS and IAC
Serial Interfaces
2 x RS-232C ports
COM3 Interface
RS-232C, 75 to 19 200 baud, modem control signals, RTS/CTS support
COM4 Interface
RS-232C, 9 600 baud, isolated configuration tool connection
CEX-Bus Communication Modules
Maximum 12 modules
ModuleBus I/O Capacity
Maximum 96 I/O modules with single CPU configuration
Cycle Time
Down to 1 ms
Boolean Operation Performance
0.36 ms per 1000 boolean operations
Redundancy Switch Over Time
Maximum 10 ms
Power Supply
24 V DC (19.2 to 30 V DC)
Backup Battery
Lithium 3.6 V
Protection Class
IP20 according to EN 60529
Certification
CE, ISA Secure, DNV-GL marine certification
Firmware Flash Compatibility and Industrial Control Architecture
The PM858K02 controller integrates CPU processing, memory storage, and communication interfaces into the AC 800M hardware architecture. The processor executes application programs stored in flash memory while maintaining real-time clock functions and diagnostic LED monitoring.
The controller supports firmware flash storage compatibility for System 800xA and Compact Control Builder environments. Therefore, configuration data, controller applications, and hardware identity information remain managed through the dedicated CPU infrastructure.
The TP830 baseplate provides two Ethernet RJ45 connections for Control Network communication. Additionally, it includes two serial communication channels for engineering access and external device interfaces. The baseplate Ethernet address provides a unique hardware identity for each controller assembly.
The slide and lock mechanism allows DIN rail attachment and removal without complex mechanical procedures. The package configuration includes redundant processor assemblies, baseplates, ModuleBus terminators, communication cables, and memory backup batteries.
Frequently Asked Questions
Q: Does the PM858K02 support CPU redundancy configuration?A: Yes. The PM858K02 supports redundant CPU operation including CPU synchronization, CEX-Bus redundancy, communication interface redundancy, and S800 I/O redundancy.
Q: What communication interfaces are available on the PM858K02 baseplate?A: The controller baseplate provides two Ethernet RJ45 ports for Control Network communication and two RS-232C serial ports. COM3 supports modem control signals, while COM4 provides an isolated service connection.
Q: What is the power requirement of the PM858K02 controller?A: The controller requires a 24 V DC supply with an operating range of 19.2 to 30 V DC. Typical current consumption is 210 mA at +24 V DC, with a maximum value of 360 mA.
Field Installation Guidelines
Install the PM858K02 controller on a compatible DIN rail using the TP830 baseplate slide and lock mounting mechanism. Verify that the mechanical locking position is fully engaged before connecting field wiring.
Connect the Control Network cables to the designated RJ45 Ethernet ports. Use industrial Ethernet routing practices and separate communication cables from high-voltage power conductors to reduce electromagnetic interference.
Connect the power supply according to the specified 24 V DC polarity requirements. Confirm grounding continuity between the controller assembly, cabinet grounding system, and protective earth.
Install the backup battery before commissioning the controller. Check LED status indicators after power application to verify normal initialization and communication operation.
Maintain adequate cabinet ventilation and avoid installation locations exposed to conductive contamination, excessive vibration, or humidity outside the specified environmental limits.
15 in stock
Delivery within 48 hours, pay afterwards
Mid weeks Monday to friday we offer next day delivery if the product is on stock and exceptions on holidays.
Weekends We offer no deliveries in the weekends.
International Depending on where you’re located, we offer next day delivery. Check your status on this link
15 in stock
Delivery within 48 hours, pay afterwards
Mid weeks Monday to friday we offer next day delivery if the product is on stock and exceptions on holidays.
Weekends We offer no deliveries in the weekends.
International Depending on where you’re located, we offer next day delivery. Check your status on this link
ABB PM864AK01 3BSE018161R1 Processor Unit Kit
Configured for processor execution and communication management in the ABB AC 800M control system, the ABB PM864AK01 3BSE018161R1 (PM864AK01 Processor Unit Kit) provides direct hardware control processing and system communication functions.
Hardware Specifications
Parameter
Specification
Model
PM864AK01 3BSE018161R1
Brand
ABB
Product Type
Processor Unit Kit
Origin
Sweden
Weight
0.96 kg
Dimensions
19 x 12 x 13.2 cm (estimated shipping size)
Communication Ports
4 communication ports
Status Indication
Integrated status LEDs
System Platform
ABB AC 800M Control System
Function
Central processing and communication management
ABB AC 800M Backplane Communication and Processing
The PM864AK01 operates as a central processing hardware component within the ABB AC 800M controller architecture. It executes controller application tasks, manages internal communication services, and exchanges data through the controller backplane interface.
Furthermore, the processor unit supports ABB industrial control configurations that require deterministic controller communication and scalable I/O integration. The hardware design allows connection with AC 800M system modules while maintaining structured firmware and application execution management.
The module supports backplane bus communication functions, allowing coordinated data exchange between processor resources and connected I/O or communication interfaces. In addition, firmware compatibility must be verified before system upgrades or controller replacements.
Frequently Asked Questions
Q: What is the primary function of the ABB PM864AK01 3BSE018161R1?A: The PM864AK01 is a processor unit kit that executes control applications and manages communication functions within the ABB AC 800M control system.
Q: How many communication ports are available on the PM864AK01?A: The supplied technical data specifies that the PM864AK01 includes 4 communication ports.
Q: Does the PM864AK01 support installation in redundant controller configurations?A: The supplied information identifies the unit as a processor unit kit. Redundant configuration capability depends on the complete AC 800M system architecture and configured controller hardware.
Field Installation Guidelines
Install the PM864AK01 according to ABB AC 800M cabinet and controller installation procedures.
Before installation, verify the module identification, controller compatibility, and firmware requirements. Ensure the mounting position provides adequate airflow and prevents contamination from dust or conductive particles.
Connect communication wiring according to ABB system wiring specifications. Keep signal cables separated from high-voltage power cables to reduce electrical interference. Apply proper grounding practices for cabinet protection and communication stability.
During commissioning, verify status LED indications, controller communication paths, and application loading conditions before placing the system into operational service.
15 in stock
Delivery within 48 hours, pay afterwards
Mid weeks Monday to friday we offer next day delivery if the product is on stock and exceptions on holidays.
Weekends We offer no deliveries in the weekends.
International Depending on where you’re located, we offer next day delivery. Check your status on this link
15 in stock
Delivery within 48 hours, pay afterwards
Mid weeks Monday to friday we offer next day delivery if the product is on stock and exceptions on holidays.
Weekends We offer no deliveries in the weekends.
International Depending on where you’re located, we offer next day delivery. Check your status on this link
ABB 3BSE018164R1 PM864AK02 Redundant Processor Unit
The ABB 3BSE018164R1, also cataloged as the PM864AK02 Redundant Processor Unit, operates as a dedicated hardware component for redundant CPU execution and controller synchronization within the ABB AC 800M automation platform.
Hardware Specifications
Parameter
Specification
Model
PM864AK02
Brand
ABB
Product Type
Central Unit / Redundant Processor Unit
Origin
Sweden
Weight
2.9 kg
Dimensions
135 mm depth x 186 mm height x 119 mm width
Processor Configuration
PM864A CPU, 2 units included for redundant operation
Baseplate
TP830 Baseplate, width 115 mm, 2 units included
Expansion Interface
CEX-Bus expansion via TK850 cable
ModuleBus Termination
TB807 ModuleBus terminator, 2 units included
Redundancy Link
TK851 RCU-Link cable
Memory Backup
Lithium battery backup, 1 battery per CPU
Spare Power Plug
3BSC840088R4, 1 unit per CPU
Exchange Reference
EXC3BSE018161R1
Battery Quantity
2 portable lithium batteries
Battery Weight
9 g
HS Code
853710
Customs Tariff Number
85371091
ABB AC 800M Redundant CPU Architecture
The PM864AK02 uses dual PM864A processor units to provide redundant controller execution within ABB AC 800M systems. The configuration maintains synchronized CPU operation through the RCU-Link connection and supports controller availability through coordinated processor status monitoring.
Furthermore, the processor kit integrates CEX-Bus expansion capability through the TK850 cable. This interface supports communication between controller components and connected system modules. The architecture also supports I/O density scaling through ABB backplane and module communication structures.
The redundant processor arrangement requires two CPU units and dedicated synchronization hardware. The included TP830 baseplates provide the mechanical mounting structure, while TB807 terminators complete the ModuleBus configuration.
Backplane Bus Communication and Firmware Compatibility
The PM864AK02 belongs to the ABB System 800xA and AC 800M controller family. It communicates through ABB controller buses designed for deterministic industrial automation data exchange.
The processor unit supports ABB firmware compatibility management through the AC 800M controller platform. Therefore, firmware revisions must match the installed controller configuration and engineering system requirements before commissioning.
The redundant configuration uses synchronized processor execution rather than independent control operation. This structure allows the controller pair to exchange operational status and maintain consistent application execution.
Frequently Asked Questions
Q: What hardware components are included in the ABB 3BSE018164R1 PM864AK02 kit?A: The kit includes two PM864A processor units, two TP830 baseplates, one TK850 CEX-Bus expansion cable, two TB807 ModuleBus terminators, one TK851 RCU-Link cable, and CPU backup batteries.
Q: Does the PM864AK02 operate as a single processor module?A: No. The PM864AK02 is a redundant processor kit requiring two PM864A CPU units for redundant controller operation.
Q: What is the function of the TK851 cable in this configuration?A: The TK851 RCU-Link cable provides the communication connection required for synchronization between redundant processor units.
Field Installation Guidelines
Install the PM864AK02 on the specified ABB AC 800M controller mounting structure using the supplied TP830 baseplates.
Verify that both processor units are correctly seated before applying system power. Ensure that the TK851 RCU-Link cable and TK850 CEX-Bus expansion cable are installed according to ABB wiring instructions.
Route communication cables separately from high-voltage power wiring to reduce electrical interference. Connect cable shields according to the cabinet grounding design and maintain proper protective earth continuity.
Before commissioning, confirm CPU firmware compatibility, ModuleBus termination installation, battery status, and redundant processor synchronization conditions through the engineering tool.
15 in stock
Delivery within 48 hours, pay afterwards
Mid weeks Monday to friday we offer next day delivery if the product is on stock and exceptions on holidays.
Weekends We offer no deliveries in the weekends.
International Depending on where you’re located, we offer next day delivery. Check your status on this link
15 in stock
Delivery within 48 hours, pay afterwards
Mid weeks Monday to friday we offer next day delivery if the product is on stock and exceptions on holidays.
Weekends We offer no deliveries in the weekends.
International Depending on where you’re located, we offer next day delivery. Check your status on this link
ABB EXC3BSE076359R1 PM866A Processor Unit
Configured for central processing execution in the ABB AC 800M control system, the ABB EXC3BSE076359R1 (PM866A Processor Unit) provides direct hardware control and communication functions within System 800xA automation platforms. The unit manages application execution, controller data processing, and system communication tasks through the AC 800M controller architecture.
Hardware Specifications
Parameter
Specification
Model
EXC3BSE076359R1 / PM866A Exchange
Brand
ABB
Product Type
Central Unit
Origin
Sweden
Weight
1 kg net weight, 1.1 kg gross weight
System Platform
ABB AC 800M / System 800xA
Function
Processor Unit Exchange
Product Classification
Central processing hardware module
Customs Tariff Number
85371091
Dangerous Goods Classification
Class 9, UN3091-PI970
Backplane Bus Communication and Firmware Compatibility
The ABB PM866A processor unit operates as a central processing module within the AC 800M controller family. It executes controller applications, manages internal communication services, and exchanges process data through the controller backplane architecture.
Furthermore, the PM866A supports ABB controller firmware compatibility management to maintain consistent operation between processor hardware and System 800xA engineering environments. The processor module handles I/O data exchange, application task execution, and diagnostic communication through the AC 800M system structure.
The PM866A architecture supports industrial control requirements including:
Backplane bus communication for controller module interaction.
I/O density scaling through compatible ABB S800 I/O configurations.
Firmware flash compatibility within supported AC 800M software versions.
Deterministic controller communication between processor and connected system modules.
Frequently Asked Questions
Q: What is the primary function of the ABB EXC3BSE076359R1 PM866A unit?A: The PM866A functions as a central processor unit for ABB AC 800M controllers. It executes control applications, processes controller data, and manages internal system communication.
Q: Can the PM866A be installed as a standalone I/O module?A: No. The PM866A is a controller processor unit and requires installation within the ABB AC 800M controller hardware architecture with compatible controller components.
Q: Does the exchange version include additional hardware modifications?A: The EXC3BSE076359R1 is an exchange part version of the PM866A processor unit. Replacement procedures must follow ABB hardware exchange requirements and system compatibility guidelines.
Field Installation Guidelines
Install the PM866A processor unit only in the designated ABB AC 800M controller mounting position.
Verify controller power isolation before removing or inserting the processor module.
Check backplane connector alignment before mechanical engagement.
Maintain proper cabinet grounding and shield termination practices for connected communication wiring.
Keep signal cables separated from high-current power conductors to reduce electromagnetic interference.
Confirm firmware and controller configuration compatibility before commissioning.
Follow ABB System 800xA engineering procedures for hardware replacement and application restoration.
15 in stock
Delivery within 48 hours, pay afterwards
Mid weeks Monday to friday we offer next day delivery if the product is on stock and exceptions on holidays.
Weekends We offer no deliveries in the weekends.
International Depending on where you’re located, we offer next day delivery. Check your status on this link
15 in stock
Delivery within 48 hours, pay afterwards
Mid weeks Monday to friday we offer next day delivery if the product is on stock and exceptions on holidays.
Weekends We offer no deliveries in the weekends.
International Depending on where you’re located, we offer next day delivery. Check your status on this link
ABB 3BSE018150R1 PM864K01 Processor Unit Kit
The ABB 3BSE018150R1, also cataloged as the PM864K01 Central Unit, operates as a dedicated processor hardware component for control execution, memory management, and communication processing within the ABB AC 800M System 800xA controller platform.
Hardware Specifications
Parameter
Specification
Model
3BSE018150R1
Brand
ABB
Product Type
Central Unit / Processor Unit Kit
ABB Type Designation
PM864K01
System Platform
ABB AC 800M / System 800xA
Origin
Sweden
Weight
1.1 kg
Dimensions
112.5 mm depth x 108 mm height x 99 mm width
Processor Module
PM864 CPU
Package Components
TP830 Baseplate, TB850 CEX-bus Terminator, TB807 ModuleBus Terminator, TB852 RCU-Link Terminator, memory backup battery, 4-position power plug
Baseplate Width
115 mm
Memory Backup
Lithium battery, 9 g
Battery Quantity
1
Battery Classification
UN3091-PI969, Class 9 Dangerous Goods
Mounting Type
AC 800M controller rack installation
Customs Tariff Number
85389091
ABB AC 800M Controller Processing Architecture
The PM864K01 processor unit provides CPU execution, controller communication handling, and application processing functions inside the ABB AC 800M automation architecture. Furthermore, the unit integrates termination accessories required for CEX-bus, ModuleBus, and RCU-Link communication paths.
The processor kit includes the PM864 CPU module with TP830 mounting baseplate and dedicated bus termination components. Therefore, system engineers can install the assembly directly into compatible AC 800M controller configurations without separately sourcing standard termination hardware.
The ABB controller architecture uses backplane and bus communication mechanisms for module interaction. In addition, firmware and control software compatibility must be verified before replacement activities, especially when upgrading from previous PM864 configurations to PM864AK01 equivalents.
Backplane Bus Communication and I/O Integration
The PM864K01 supports ABB AC 800M controller communication through internal module buses and external communication interfaces. The included TB850 CEX-bus terminator, TB807 ModuleBus terminator, and TB852 RCU-Link terminator maintain correct electrical termination conditions for connected controller components.
The AC 800M platform supports I/O density scaling through modular expansion structures. Moreover, correct termination installation prevents communication disturbances caused by improper bus impedance or open-ended communication lines.
The processor unit operates as the central execution element, coordinating application logic, controller tasks, and connected I/O modules through ABB industrial control network structures.
Frequently Asked Questions
Q: What components are included with ABB 3BSE018150R1 PM864K01?A: The kit includes the PM864 CPU, TP830 baseplate, TB850 CEX-bus terminator, TB807 ModuleBus terminator, TB852 RCU-Link terminator, memory backup battery, and 4-position power plug.
Q: Can ABB 3BSE018150R1 be used for new AC 800M installations?A: This part is designated as a spare component for systems placed on the market before July 22, 2017. New installations should use the recommended PM866AK01 replacement according to ABB documentation.
Q: What software compatibility applies when replacing this processor unit?A: Replacement with PM864AK01 requires Control Software version 3.2/10 or later. Application modifications are not required when meeting the specified compatibility conditions.
Field Installation Guidelines
Install the PM864K01 processor unit on the designated ABB AC 800M controller mounting structure.
Verify that the TP830 baseplate is mechanically secured before connecting controller modules.
Install CEX-bus, ModuleBus, and RCU-Link terminators according to the system hardware configuration.
Maintain proper separation between power wiring and communication wiring to reduce electrical interference.
Connect the power plug using the approved ABB wiring arrangement and verify polarity before energizing.
Confirm controller firmware and Control Software compatibility before commissioning replacement units.
Handle the lithium memory backup battery according to applicable transport and disposal requirements.
15 in stock
Delivery within 48 hours, pay afterwards
Mid weeks Monday to friday we offer next day delivery if the product is on stock and exceptions on holidays.
Weekends We offer no deliveries in the weekends.
International Depending on where you’re located, we offer next day delivery. Check your status on this link
15 in stock
Delivery within 48 hours, pay afterwards
Mid weeks Monday to friday we offer next day delivery if the product is on stock and exceptions on holidays.
Weekends We offer no deliveries in the weekends.
International Depending on where you’re located, we offer next day delivery. Check your status on this link
ABB PM867 Processor Unit
The ABB PM867 3BSE0763561, also cataloged as the PM867 Processor Unit, operates as a dedicated hardware component for real-time control execution within the ABB AC 800M controller platform. It processes application logic, manages controller communication, and supports CPU redundancy functions in System 800xA architectures.
Hardware Specifications
Parameter
Specification
Model
ABB PM867 3BSE0763561
Brand
ABB
Product Type
CPU Processor Unit
Series
AC 800M / System 800xA
Origin
Sweden
Operating Temp
0 deg C to +55 deg C
Power Consumption
System backplane supplied; exact current consumption depends on configuration
Processor Type
High-speed industrial control processor for real-time application execution
Memory Capacity
Onboard RAM and Flash memory for application programs, configuration data, and variables
Redundancy Support
CPU hot-standby redundancy configuration supported
Communication Interfaces
Ethernet ports, CEX bus expansion interfaces, diagnostic/service interfaces
Mounting Method
DIN-rail installation within AC 800M controller assembly
Engineering Software
ABB Control Builder Professional and Compact Control Builder
Backplane Bus Communication and Firmware Compatibility
The ABB PM867 uses the AC 800M controller architecture to manage deterministic control execution and module communication through the controller backplane. Therefore, the processor unit supports coordinated data exchange between CPU resources, communication interfaces, and connected I/O modules.
The unit supports firmware flash compatibility within the AC 800M hardware family. Additionally, application execution depends on the installed firmware version, controller configuration, and engineering software revision. Firmware upgrades must match the approved System 800xA compatibility matrix.
The PM867 supports I/O density scaling through AC 800M expansion structures. As a result, users can configure distributed I/O systems while maintaining synchronized controller processing and communication timing.
Frequently Asked Questions
Q: Does the ABB PM867 support CPU redundancy operation?A: Yes. The PM867 supports hot-standby CPU redundancy configurations within compatible AC 800M controller architectures. Redundancy operation requires matched processor units, approved firmware versions, and correct system configuration.
Q: What communication interfaces are available on the PM867?A: The PM867 provides Ethernet communication interfaces for controller networking and CEX bus connections for compatible communication modules such as fieldbus interface units.
Q: Can the PM867 be replaced without changing the complete AC 800M system?A: Replacement is possible when the installed controller configuration, firmware revision, and engineering database support the replacement processor unit.
Field Installation Guidelines
Install the PM867 on the designated AC 800M DIN-rail mounting position according to ABB installation procedures.
Verify that the controller backplane connections are clean and mechanically secured before power application.
Keep Ethernet and communication wiring separated from high-voltage power cables to reduce electromagnetic interference.
Use proper grounding methods for cabinet assemblies and maintain recommended shielding practices for communication cables.
Confirm firmware compatibility before replacing or upgrading the processor unit.
After installation, verify controller diagnostics, communication status, and application execution through ABB engineering tools.
15 in stock
Delivery within 48 hours, pay afterwards
Mid weeks Monday to friday we offer next day delivery if the product is on stock and exceptions on holidays.
Weekends We offer no deliveries in the weekends.
International Depending on where you’re located, we offer next day delivery. Check your status on this link
15 in stock
Delivery within 48 hours, pay afterwards
Mid weeks Monday to friday we offer next day delivery if the product is on stock and exceptions on holidays.
Weekends We offer no deliveries in the weekends.
International Depending on where you’re located, we offer next day delivery. Check your status on this link
ABB PM866 AC 800M Processor Unit
The ABB PM866 (3BSE050200R1), also cataloged as the PM866 Processor Unit, operates as a dedicated CPU component for control logic execution, data processing, and communication management within the ABB AC 800M controller platform.
Hardware Specifications
Parameter
Specification
Model
PM866
Brand
ABB
Product Type
Processor Unit / CPU
Series
AC 800M
Catalog Number
3BSE050200R1
Origin
Sweden
Operating Temp
0 deg C to +55 deg C
Power Consumption
Not specified
Power Supply
24 VDC (19.2 to 30 VDC)
Processor Performance
High-speed CPU execution for AC 800M control applications
System Memory
64 MB RAM (configuration dependent)
Backup Memory
Supports backup memory options depending on configuration
Ethernet Communication
2 x Ethernet ports for control network and MMS communication
Serial Communication
1 x RS-232C serial port with RJ-45 interface and optical isolation
Expansion Interface
CEX bus interface for communication and expansion modules
Protection Class
IP20, cabinet installation required
Redundancy Support
Supports CPU redundancy with compatible hardware and licenses
Profinet and Industrial Control Communication Characteristics
The ABB PM866 integrates with the AC 800M controller architecture through internal backplane and communication interfaces. Therefore, it provides deterministic processing for PLC and DCS control tasks.
The processor manages application execution, I/O communication cycles, and system diagnostics. In addition, firmware compatibility defines available communication functions and controller configuration options.
The AC 800M platform supports scalable I/O density through compatible S800 I/O modules and communication interfaces. The PM866 exchanges control data through Ethernet-based industrial networks while maintaining synchronized controller operations.
Frequently Asked Questions
Q: Does the ABB PM866 support CPU redundancy operation?
A: Yes. The PM866 supports CPU redundancy configurations when used with compatible AC 800M hardware components, software licenses, and system configuration settings.
Q: What power supply does the PM866 require?
A: The PM866 requires a 24 VDC power supply input. The specified operating range is 19.2 to 30 VDC.
Q: Which communication interfaces are available on the PM866?
A: The PM866 provides two Ethernet ports for control network communication, one isolated RS-232C serial port, and a CEX bus interface for expansion modules.
Field Installation Guidelines
Install the PM866 in an AC 800M controller cabinet with appropriate mechanical protection and environmental control.
Connect the 24 VDC power supply according to ABB wiring requirements. Verify polarity before energizing the controller.
Use shielded communication cables for Ethernet and serial connections. Ground cable shields according to site grounding practices to reduce electromagnetic interference.
Maintain proper separation between power wiring and communication cables. Avoid routing signal cables parallel to high-current switching circuits.
Before commissioning, verify firmware compatibility, controller configuration parameters, and communication status through the ABB engineering software environment.
15 in stock
Delivery within 48 hours, pay afterwards
Mid weeks Monday to friday we offer next day delivery if the product is on stock and exceptions on holidays.
Weekends We offer no deliveries in the weekends.
International Depending on where you’re located, we offer next day delivery. Check your status on this link
8 in stock
Delivery within 48 hours, pay afterwards
Mid weeks Monday to friday we offer next day delivery if the product is on stock and exceptions on holidays.
Weekends We offer no deliveries in the weekends.
International Depending on where you’re located, we offer next day delivery. Check your status on this link
The Bently Nevada 330130-080-00-CN is a high-quality 3300 XL standard extension cable designed for use within the 3300 XL 8 mm Proximity Transducer System. This cable facilitates the connection between a proximity probe and a Proximitor sensor, ensuring accurate transmission of vibration and position data in industrial machinery.Features
Designed for 8.0 meters (26.2 feet) of signal transmission.
Complete interchangeability with all standard 3300 XL 8 mm probes and Proximitor sensors.
Backwards compatible with non-3300 XL series transducer system components.
Standard cable construction with CSA, ATEX, and IECEx agency approvals.
Supports static (position) and dynamic (vibration) measurement requirements.
Applications
Fluid-Film Bearing Monitoring: Essential for measuring vibration and position on critical rotating equipment.
Turbomachinery Protection: Ideal for compressors, turbines, and industrial rotating machinery.
Keyphasor and Speed Measurement: Provides reliable reference signals for rotational speed and phase monitoring.
API 670 Compliance: Engineered to meet the mechanical configuration, linear range, and accuracy requirements of the American Petroleum Institute (API) 670 standard.
Technical Specifications
Product Model
330130-080-00-CN
Cable Length
8.0 meters (26.2 feet)
Output Resistance
50 Ohm
Capacitance
69.9 pF/m (21.3 pF/ft) typical
Agency Approvals
CSA, ATEX, IECEx
Weight
0.3 kg
Installation Guidelines
Ensure all system components are powered down before connecting or disconnecting the extension cable.
Handle connectors with care to prevent damage to the pins or threads; ensure connections are clean and free of debris.
Route cables away from high-EMI sources and high-voltage power lines to maintain signal integrity.
Use appropriate cable protection if the installation environment involves harsh chemicals or mechanical stress.
Verify that the total system length (probe + extension cable) matches the calibrated length for the specific Proximitor sensor used.
FAQWhat is the 330130-080-00-CN?It is a 3300 XL Standard Extension Cable designed by Bently Nevada for use with 3300 XL 8 mm proximity probes and Proximitor sensors.What does the CN suffix indicate?The -CN suffix indicates that the cable includes specific regulatory approvals and documentation tailored for regional compliance.Is it compatible with other 3300 XL components?Yes, it is designed for complete interchangeability with all standard 3300 XL 8 mm probes and Proximitor sensors, eliminating the need for individual component calibration.Can it be used in high-temperature environments?This is a standard cable rated for standard temperature ranges. For applications exceeding 177 degC (350 degF), an Extended Temperature Range (ETR) system is recommended.
8 in stock
Delivery within 48 hours, pay afterwards
Mid weeks Monday to friday we offer next day delivery if the product is on stock and exceptions on holidays.
Weekends We offer no deliveries in the weekends.
International Depending on where you’re located, we offer next day delivery. Check your status on this link
2 in stock
Delivery within 48 hours, pay afterwards
Mid weeks Monday to friday we offer next day delivery if the product is on stock and exceptions on holidays.
Weekends We offer no deliveries in the weekends.
International Depending on where you’re located, we offer next day delivery. Check your status on this link
DescriptionThe ABB SAFT185TBC is a control board component designed for industrial automation and control systems. As a critical spare part, this module is engineered to meet the operational requirements of specific ABB control architectures. Please note that this unit has been discontinued by the manufacturer; it remains a vital component for maintaining legacy systems where original hardware compatibility is required.Features
Original ABB component for reliable system integration.
Designed for specific control board functionality within ABB industrial platforms.
Robust construction suitable for standard industrial control environments.
Direct replacement for legacy system maintenance.
Technical Specifications
Manufacturer
ABB
Model
SAFT185TBC
Alternative Part Numbers
SAFT 185 TBC, 58119687
Product Type
Control Board
Weight
0.34 kg
Installation Guidelines
Ensure all power is disconnected from the control cabinet before attempting to install or remove the control board.
Handle the module by its edges to prevent electrostatic discharge (ESD) damage to sensitive electronic components.
Verify that the board is correctly seated in the designated slot or mounting chassis to ensure proper electrical contact.
Ensure the environment is free from excessive dust, moisture, and high-EMI sources to maintain signal integrity.
Follow standard industrial grounding procedures for the cabinet to protect the control board from voltage surges.
FAQIs this control board new or refurbished?This product is a legacy spare part. Please contact our sales team to confirm the specific condition (new, surplus, or refurbished) for this order code.Is the SAFT185TBC still supported by ABB?This model has been discontinued by the manufacturer. It is typically sourced for maintenance and repair of existing legacy installations.Can I use this as a substitute for other control boards?No, this board is model-specific. Ensure the part number SAFT185TBC or 58119687 matches your existing hardware exactly before installation.
2 in stock
Delivery within 48 hours, pay afterwards
Mid weeks Monday to friday we offer next day delivery if the product is on stock and exceptions on holidays.
Weekends We offer no deliveries in the weekends.
International Depending on where you’re located, we offer next day delivery. Check your status on this link
10 in stock
Delivery within 48 hours, pay afterwards
Mid weeks Monday to friday we offer next day delivery if the product is on stock and exceptions on holidays.
Weekends We offer no deliveries in the weekends.
International Depending on where you’re located, we offer next day delivery. Check your status on this link
The Allen-Bradley 2711-K3A2L1 is a PanelView 300 series operator interface terminal designed for industrial automation applications. This monochrome display unit features a keypad interface for operator input and is powered by a DC power supply. Although this model was discontinued by the manufacturer on June 30, 2012, it remains a critical component in legacy control systems requiring DH-485 communication connectivity.Features
3-inch monochrome display for clear process visualization.
Integrated keypad for reliable operator input in industrial environments.
Supports DH-485 communication protocol for integration with Allen-Bradley controllers.
Includes an RS-232 printer port for local data logging and reporting.
Designed for DC power input.
ApplicationsThis operator terminal is typically used in manufacturing and process control environments for monitoring machine status, adjusting setpoints, and managing alarm conditions in systems utilizing DH-485 networks.Technical Specifications
Manufacturer
Allen-Bradley
Model
2711-K3A2L1
Display Type
Monochrome
Display Size
3-inch
Input Method
Keypad
Communication
DH-485
Auxiliary Port
RS-232 Printer Port
Power Supply
DC
Installation Guidelines
Ensure the panel cutout is prepared according to the manufacturer's mounting template to maintain the required NEMA/IP seal rating.
Use shielded communication cables for DH-485 connections to minimize electromagnetic interference (EMI).
Verify that the DC power source meets the voltage requirements specified on the terminal nameplate before connection.
Maintain proper ventilation around the unit to prevent overheating during continuous operation.
Always disconnect power before installing or removing the terminal from the control panel.
Handle with care to avoid damage to the display screen and keypad membrane.
FAQIs the 2711-K3A2L1 still supported by the manufacturer?No, this model was discontinued on June 30, 2012. It is typically sourced through surplus or refurbished channels for legacy system maintenance.What communication protocols does this terminal support?This unit supports DH-485 communication and includes an RS-232 port specifically for printer connectivity.
10 in stock
Delivery within 48 hours, pay afterwards
Mid weeks Monday to friday we offer next day delivery if the product is on stock and exceptions on holidays.
Weekends We offer no deliveries in the weekends.
International Depending on where you’re located, we offer next day delivery. Check your status on this link
9 in stock
Delivery within 48 hours, pay afterwards
Mid weeks Monday to friday we offer next day delivery if the product is on stock and exceptions on holidays.
Weekends We offer no deliveries in the weekends.
International Depending on where you’re located, we offer next day delivery. Check your status on this link
The Siemens 6ES5430-8MB11 is a digital input module designed for integration with the Simatic S5-090U, S5-095U, S5-100U, and ET 100U/200U programmable logic controller systems. This module provides four isolated digital input channels capable of processing signals within a 24 to 60 VDC range, facilitating reliable data acquisition in industrial automation environments.Features
Four galvanically isolated digital input channels for enhanced electrical noise immunity.
Wide input voltage compatibility (24 to 60 VDC) for direct interface with various field sensors.
Optimized for rapid signal processing and minimal propagation delay.
Designed for seamless integration into legacy Simatic S5 control architectures.
ApplicationsThis module is suitable for industrial applications requiring robust signal isolation, including water treatment facilities, automated packaging machinery, and assembly line control systems.Technical Specifications
Model
6ES5430-8MB11
Brand
Siemens Simatic S5
Inputs
4 Isolated Digital Inputs
Voltage Range
24 to 60 VDC
Operating Temperature
0 to 55 degC
Compatibility
Simatic S5-090U, S5-095U, S5-100U, ET 100U, ET 200U
Installation Guidelines
Ensure the PLC system is powered down before inserting or removing the module from the rack.
Verify that field wiring is properly shielded and routed away from high-voltage power lines to minimize EMI.
Maintain adequate clearance around the module to ensure proper ventilation and cooling within the control cabinet.
Use appropriate ESD protection measures when handling the module to prevent damage to internal circuitry.
Ensure all terminal connections are secure and that the input voltage polarity matches the module specifications.
FAQWhat is the primary function of the 6ES5430-8MB11?This module serves as a digital input interface, converting field-side signals (24-60 VDC) into logic-level signals for the host PLC while providing galvanic isolation to protect the controller from electrical interference.Is this module compatible with modern S7 controllers?No, this module is specifically engineered for the legacy Simatic S5 and ET 100U/200U series architectures and is not natively compatible with S7 series hardware.
9 in stock
Delivery within 48 hours, pay afterwards
Mid weeks Monday to friday we offer next day delivery if the product is on stock and exceptions on holidays.
Weekends We offer no deliveries in the weekends.
International Depending on where you’re located, we offer next day delivery. Check your status on this link
6 in stock
Delivery within 48 hours, pay afterwards
Mid weeks Monday to friday we offer next day delivery if the product is on stock and exceptions on holidays.
Weekends We offer no deliveries in the weekends.
International Depending on where you’re located, we offer next day delivery. Check your status on this link
DescriptionThe General Electric IC660TSD021 is a terminal assembly designed for use within the GE Genius I/O system. This component serves as a critical interface for the IC660BBD021 I/O block, facilitating secure and reliable field wiring connections for industrial automation applications. It is engineered to support solid-state sensors and provides configurable input filtering to ensure signal integrity in demanding environments.Features
Designed specifically for compatibility with the IC660BBD021 Genius I/O block.
Supports integration with solid-state sensors for versatile field device connectivity.
Configurable input filter timing ranging from 5 to 100 milliseconds to mitigate noise.
Robust construction suitable for standard industrial control cabinet environments.
Technical Specifications
Product Model
IC660TSD021
Manufacturer
General Electric
Product Type
Terminal Assembly
Compatibility
IC660BBD021 I/O Block
Operating Temperature
0 to 60 degC (32 to 140 degF)
Relative Humidity
5 to 95% (non-condensing)
Input Filter Time
5 to 100 ms
Installation Guidelines
Ensure the main power is disconnected before installing or removing the terminal assembly from the I/O block.
Verify that the terminal assembly is properly seated and locked into the corresponding I/O block to ensure reliable electrical contact.
Follow standard industrial wiring practices, ensuring that field wires are properly stripped and secured within the terminal blocks to prevent loose connections.
Maintain proper cable routing to separate signal wiring from high-voltage power lines to reduce the risk of electromagnetic interference (EMI).
Operate within the specified temperature and humidity ranges to ensure long-term reliability of the electronic components.
FAQWhat is the primary function of the IC660TSD021?The IC660TSD021 is a terminal assembly that provides the physical wiring interface for the GE Genius I/O block, allowing field devices to communicate with the control system.Is this module compatible with other Genius I/O blocks?This terminal assembly is specifically designed for compatibility with the IC660BBD021 I/O block. Please consult your system documentation before attempting to use it with other models.What are the environmental requirements for this module?The module is designed to operate in temperatures between 32 and 140 degrees Fahrenheit (0 to 60 degC) and supports a relative humidity range of 5 to 95 percent.
6 in stock
Delivery within 48 hours, pay afterwards
Mid weeks Monday to friday we offer next day delivery if the product is on stock and exceptions on holidays.
Weekends We offer no deliveries in the weekends.
International Depending on where you’re located, we offer next day delivery. Check your status on this link
8 in stock
Delivery within 48 hours, pay afterwards
Mid weeks Monday to friday we offer next day delivery if the product is on stock and exceptions on holidays.
Weekends We offer no deliveries in the weekends.
International Depending on where you’re located, we offer next day delivery. Check your status on this link
DescriptionThe Emerson Ovation 5X00211G02 is a mission-critical process control card engineered for high-performance computational tasks within the Ovation Distributed Control System (DCS). Serving as a primary engine for real-time logic execution, this module facilitates precise regulation of industrial processes in sectors such as power generation, oil and gas refining, and large-scale manufacturing. By managing high-speed data acquisition and executing complex control algorithms, the 5X00211G02 ensures operational stability, minimizes process deviations, and supports reliable, autonomous control of field instrumentation.Features
Optimized for high-availability industrial environments with robust hardware architecture.
Supports seamless communication via the Ovation system backplane for synchronization with I/O modules and HMI workstations.
Designed for high thermal efficiency and electromagnetic compatibility to withstand heavy industrial conditions.
Supports redundant system configurations to enable instantaneous failover and uninterrupted control logic execution.
Engineered to minimize signal jitter and maintain strict control loop integrity during high-intensity throughput.
ApplicationsThis control card is typically deployed in Ovation DCS architectures to manage critical control loops, perform high-speed logic processing, and interface with distributed field devices in power plants and process manufacturing facilities.Technical Specifications
Model
5X00211G02
Brand
Emerson Ovation
Operating Temperature
0 to 60 degC
Power Consumption
8 W (typical)
Mounting Interface
Ovation standard controller rack
Form Factor
Single-slot footprint
Installation Guidelines
Ensure the Ovation rack is powered down before inserting or removing the control card to prevent electrical damage.
Verify that the card is fully seated in the designated controller rack slot to ensure reliable backplane communication.
Handle the module using standard ESD (electrostatic discharge) precautions to protect sensitive internal circuitry.
Ensure adequate ventilation within the cabinet to maintain operating temperatures within the specified 0 to 60 degC range.
Confirm that all system redundancy settings are correctly configured in the Ovation software environment following hardware installation.
FAQIs the 5X00211G02 compatible with all Ovation systems?This card is designed for the Ovation DCS platform. Compatibility depends on your specific system firmware and controller revision; please verify your system documentation or part compatibility list before installation.Does this card support redundant operation?Yes, the 5X00211G02 is designed to support redundant system configurations, allowing for seamless failover in the event of a primary controller failure.
8 in stock
Delivery within 48 hours, pay afterwards
Mid weeks Monday to friday we offer next day delivery if the product is on stock and exceptions on holidays.
Weekends We offer no deliveries in the weekends.
International Depending on where you’re located, we offer next day delivery. Check your status on this link
DescriptionThe Bently Nevada 3300/46 Differential Expansion Monitor is a rack-mounted module designed to measure the relative expansion between a turbine rotor and its casing. This measurement is critical in steam turbines and other large rotating machinery where thermal growth can cause mechanical interference. The monitor continuously compares expansion values against alarm setpoints, providing early warning of abnormal conditions and protecting equipment from damage.Features
Measures differential expansion between rotor and casing
Continuous parameter comparison against alarm setpoints
Relay actuation for Alert and Danger conditions
LED indicators for OK, Bypass, Alert, and Danger status
Compatible with standard proximity probe inputs via Proximitor sensors
Technical Specifications
Model
3300/46-XX-XX-01-00
Brand
Bently Nevada
Series
3300
Operating Temperature
0 to 60 degC
Power Consumption
1.5 W
Sensitivity
200 mV/mil (8 V/mm) or 100 mV/mil (4 V/mm)
Signal Accuracy
+/- 0.33% typical, +/- 1% max at 25 degC
Output Signals
+4 to +20 mA, +1 to +5 VDC, 0 to -10 VDC
Installation Guidelines
Ensure the 3300 rack is properly grounded to a clean earth point to minimize electrical noise.
Always power down the rack before inserting or removing the monitor module to prevent damage to the backplane connectors.
Use shielded cables for all transducer inputs to protect against EMI in industrial environments.
Verify that the probe configuration matches the specific module suffix settings for accurate measurement.
Ensure adequate ventilation within the cabinet to maintain the operating temperature range of 0 to 60 degC.
FAQWhat is the primary function of the 3300/46 monitor?This module is designed to monitor the differential expansion between the rotor and the casing of rotating machinery, such as steam turbines, to prevent mechanical interference caused by thermal growth.Does this module include relay outputs?Yes, the 01 suffix indicates a single relay output configuration for Alert and Danger alarm conditions.What type of sensors does this module support?It is designed to accept inputs from proximity probes via Proximitor sensors.
3 in stock
Delivery within 48 hours, pay afterwards
Mid weeks Monday to friday we offer next day delivery if the product is on stock and exceptions on holidays.
Weekends We offer no deliveries in the weekends.
International Depending on where you’re located, we offer next day delivery. Check your status on this link
DescriptionThe 2711-NP2 is a set of mounting clips manufactured by Allen-Bradley, specifically engineered to facilitate the secure installation of touchscreen and keypad operator interfaces. Supplied in a pack of six, these metal clips are designed to provide rigid mechanical mounting for industrial automation hardware, ensuring that devices remain firmly attached to panels even in environments subject to continuous industrial vibration.Features
Designed for secure attachment of Bulletin 2711 operator interfaces.
Constructed from durable metal for long-term structural integrity.
Ensures even distribution of clamping force across the terminal bezel.
Resistant to mechanical stress during panel cutout tightening.
Pack quantity: 6 clips per set.
ApplicationsThese mounting clips are used extensively in manufacturing and processing facilities to secure HMI, MMI, and OIT hardware. They are essential for maintaining system integrity in control panels and operator consoles where terminal stability is critical.Technical Specifications
Model
2711-NP2
Brand
Allen-Bradley
Product Line
Bulletin 2711
Material
Metal
Pack Quantity
6 clips
Operating Temperature
0 to 60 degC
Operating Humidity
Up to 80 percent non-condensing
Max Installation Altitude
1000 meters
Installation Guidelines
Ensure the panel cutout is prepared to the manufacturer's specified dimensions before inserting the terminal.
Insert the mounting clips into the designated slots on the terminal housing.
Tighten the screws on the clips evenly to ensure a uniform seal and prevent bezel deformation.
Do not overtighten, as this may damage the clip threads or the terminal enclosure.
Verify that the terminal is seated flush against the panel surface to maintain environmental ratings.
FAQWhat is the primary purpose of the 2711-NP2?The 2711-NP2 is a mounting hardware kit used to secure Allen-Bradley Bulletin 2711 operator terminals into panel cutouts, preventing movement and ensuring a stable interface for operators.Are these clips compatible with all Allen-Bradley terminals?The 2711-NP2 is designed for the Bulletin 2711 series. Please verify your specific terminal model's documentation to confirm compatibility with this mounting hardware.
3 in stock
Delivery within 48 hours, pay afterwards
Mid weeks Monday to friday we offer next day delivery if the product is on stock and exceptions on holidays.
Weekends We offer no deliveries in the weekends.
International Depending on where you’re located, we offer next day delivery. Check your status on this link
8 in stock
Delivery within 48 hours, pay afterwards
Mid weeks Monday to friday we offer next day delivery if the product is on stock and exceptions on holidays.
Weekends We offer no deliveries in the weekends.
International Depending on where you’re located, we offer next day delivery. Check your status on this link
DescriptionThe Emerson 8717-CA-PS is a specialized power supply module carrier designed for the PAC8000 I/O system. This carrier provides the necessary mounting and power distribution infrastructure for modular I/O components, ensuring reliable operation within industrial control environments. It is engineered to support seamless integration with other system components, such as the 8718-CA-NS or 8715-CA-BI carriers.Features
Designed specifically for the PAC8000 modular I/O platform.
Integrated DC power feed functionality.
Flexible mounting options including standard DIN rail or panel mounting.
Robust construction suitable for demanding industrial temperature ranges.
Supports efficient power distribution for connected I/O modules.
Technical Specifications
Product Model
8717-CA-PS
Manufacturer
Emerson
Power Input
18 to 32 V DC
Operating Temperature
-40 to +70 degC
Storage Temperature
-50 to +85 degC
Relative Humidity
5 to 95% RH (non-condensing)
Tariff Code
8537101190
Installation Guidelines
Ensure the installation surface is clean and vibration-free for panel mounting, or use a standard DIN rail for modular rack configurations.
Verify that the input power supply is within the 18 to 32 V DC range before connecting to the carrier.
Maintain proper clearance around the module to allow for adequate airflow and heat dissipation, especially when operating near the upper temperature limits.
Ensure all wiring is securely terminated and that the carrier is properly grounded according to local electrical codes.
Power down the system before installing or removing any I/O modules from the carrier to prevent electrical damage or signal disruption.
FAQIs the 8717-CA-PS compatible with all PAC8000 modules?The 8717-CA-PS is a power supply carrier designed for specific use within the PAC8000 I/O system. It is intended to be used in conjunction with compatible carriers such as the 8718-CA-NS or 8715-CA-BI. Please verify your specific system configuration requirements before installation.What is the required power input for this carrier?This module carrier operates on a DC power input ranging from 18 to 32 V DC.
8 in stock
Delivery within 48 hours, pay afterwards
Mid weeks Monday to friday we offer next day delivery if the product is on stock and exceptions on holidays.
Weekends We offer no deliveries in the weekends.
International Depending on where you’re located, we offer next day delivery. Check your status on this link
10 in stock
Delivery within 48 hours, pay afterwards
Mid weeks Monday to friday we offer next day delivery if the product is on stock and exceptions on holidays.
Weekends We offer no deliveries in the weekends.
International Depending on where you’re located, we offer next day delivery. Check your status on this link
The Bently Nevada 128275-01F is a full-size Future Expansion Faceplate designed for the 3500 Series Machinery Protection System. This blank slot filler serves as a protective cover for unused module slots within the 3500 rack, ensuring proper internal airflow, protecting sensitive backplane components from dust and contaminants, and maintaining a professional rack aesthetic.Features
Designed specifically for Bently Nevada 3500 Series rack slots.
Full-size panel construction for complete slot coverage.
Constructed from durable materials with a protective finish.
Essential for maintaining thermal management and environmental integrity within the rack.
Applications
Oil & Gas: Refining, petrochemical plants, and offshore production facilities.
Power Generation: Traditional and renewable energy power plants.
Manufacturing: General industrial facilities utilizing Bently Nevada asset condition monitoring systems.
Technical Specifications
Product Model
128275-01F
Material
Aluminum with black anodized finish
Compatibility
Bently Nevada 3500 Series Rack
Operating Temperature
-40 degC to +85 degC
Storage Temperature
-40 degC to +85 degC
Humidity
0 to 95% RH (non-condensing)
Installation Guidelines
The 128275-01F can be installed in any of the 14 available monitor slots (slots 2 through 15) in a standard 3500 Series Rack.
Ensure the faceplate is seated flush against the rack chassis to maintain the integrity of the internal cooling airflow.
Standard ESD precautions should be observed when handling or installing components near the 3500 rack backplane.
Verify that the slot is truly intended for future expansion and is not required for current monitoring modules before installation.
FAQsWhat is the 128275-01F?The 128275-01F is a blanking plate used to cover empty slots in a Bently Nevada 3500 monitoring system rack.Where is the 128275-01F installed?It is installed in any of the 14 available monitor slots (slots 2-15) of a 3500 rack to protect the backplane and maintain airflow.What does the F suffix indicate?In Bently Nevada nomenclature, the suffix typically denotes a specific hardware revision level or configuration variant.
10 in stock
Delivery within 48 hours, pay afterwards
Mid weeks Monday to friday we offer next day delivery if the product is on stock and exceptions on holidays.
Weekends We offer no deliveries in the weekends.
International Depending on where you’re located, we offer next day delivery. Check your status on this link
9 in stock
Delivery within 48 hours, pay afterwards
Mid weeks Monday to friday we offer next day delivery if the product is on stock and exceptions on holidays.
Weekends We offer no deliveries in the weekends.
International Depending on where you’re located, we offer next day delivery. Check your status on this link
DescriptionThe ABB NDCU-21 (63985317B) is a dedicated Drive Control Unit designed for integration within ABB inverter drive systems. This unit serves as the central processing and control interface for managing drive operations, monitoring system status, and executing control logic. Please note that this specific model has been discontinued by the manufacturer.Features
Centralized control processing for ABB inverter drive applications
Integrated 32 MB SDRAM for operational memory
512 kB FRAM for reliable data backup
Equipped with 6 digital inputs rated for 24 V DC operation
Designed for robust performance in industrial drive environments
Technical Specifications
Product Model
NDCU-21 63985317B
Manufacturer
ABB
Control Supply Voltage
24 V DC
Current Draw
0.7 A (typical)
Digital Inputs
6 x 24 V DC
Memory (RAM)
32 MB SDRAM
Memory (Backup)
512 kB FRAM
Isolation Rating
500 V DC
Operating Temperature
-10 degC to +55 degC
Storage Temperature
-40 degC to +85 degC
Installation Guidelines
Ensure the drive system is fully powered down and locked out before installing or removing the NDCU-21 unit.
Handle the module using proper ESD (Electrostatic Discharge) precautions to prevent damage to internal circuitry.
Verify that the 24 V DC control supply voltage is stable and within the specified operating range before energizing.
Ensure proper seating of the unit within the drive rack to maintain reliable electrical connections.
Route signal cables away from high-voltage power lines and sources of electromagnetic interference (EMI) to ensure signal integrity.
Maintain adequate ventilation around the drive enclosure to ensure the ambient temperature remains within the specified -10 degC to +55 degC range.
FAQIs the NDCU-21 still in production?No, the ABB NDCU-21 63985317B has been discontinued by the manufacturer. It is typically sourced as a spare part for legacy drive systems.What is the primary function of this unit?The NDCU-21 acts as the control brain for the inverter drive, handling digital I/O processing and executing the control algorithms required for motor and drive management.
9 in stock
Delivery within 48 hours, pay afterwards
Mid weeks Monday to friday we offer next day delivery if the product is on stock and exceptions on holidays.
Weekends We offer no deliveries in the weekends.
International Depending on where you’re located, we offer next day delivery. Check your status on this link
4 in stock
Delivery within 48 hours, pay afterwards
Mid weeks Monday to friday we offer next day delivery if the product is on stock and exceptions on holidays.
Weekends We offer no deliveries in the weekends.
International Depending on where you’re located, we offer next day delivery. Check your status on this link
DescriptionThe General Electric IC660TBD110 is a Genius Block I/O module designed for industrial automation control systems. This module provides 16 input circuits, specifically engineered for 115 VAC operation within the Genius I/O series. It serves as a reliable interface for monitoring AC signal states in distributed control environments.Features
16-circuit input capacity for high-density signal monitoring.
Designed for 115 VAC nominal operation with an operating range of 93 to 132 VAC.
Supports standard industrial power frequencies from 47 to 63 Hz.
Robust isolation rating of 1500 Volts between input and ground for enhanced system protection.
Optimized for integration within the GE Genius I/O distributed architecture.
Technical Specifications
Product Model
IC660TBD110
Block Type
16-circuit Input Module
Rated Voltage
115 VAC
Operating Voltage Range
93 to 132 VAC
Frequency
47 to 63 Hz
Power Supply Dropout Time
1 cycle
Input to Ground Isolation
1500 Volts
Maximum Heat Dissipation
28 Watts
Operating Temperature
0 to 60 degC (32 to 140 degF)
Installation Guidelines
Ensure the system power is completely disconnected before installing or removing the module from the I/O bus.
Mount the block in a location that allows for adequate airflow to manage the 28W maximum heat dissipation.
Verify that the input voltage levels match the module's specified operating range (93-132 VAC) to prevent damage.
Ensure proper grounding of the module chassis to maintain the 1500V isolation integrity.
Follow standard ESD (Electrostatic Discharge) precautions when handling the module to protect internal circuitry.
FAQWhat is the primary function of the IC660TBD110?The IC660TBD110 is a 16-point AC input block used in the GE Genius I/O system to interface field-level 115 VAC signals with a programmable controller or host system.What is the operating voltage range for this module?The module is designed to operate within a voltage range of 93 to 132 VAC at a frequency of 47 to 63 Hz.
4 in stock
Delivery within 48 hours, pay afterwards
Mid weeks Monday to friday we offer next day delivery if the product is on stock and exceptions on holidays.
Weekends We offer no deliveries in the weekends.
International Depending on where you’re located, we offer next day delivery. Check your status on this link
3 in stock
Delivery within 48 hours, pay afterwards
Mid weeks Monday to friday we offer next day delivery if the product is on stock and exceptions on holidays.
Weekends We offer no deliveries in the weekends.
International Depending on where you’re located, we offer next day delivery. Check your status on this link
DescriptionThe Schneider Electric TSXCAY41 is a specialized motion control module designed for the Modicon Premium automation platform. It provides high-performance servo motor control capabilities, supporting up to four axes of motion. The module is engineered for diverse industrial applications, offering flexible operating modes including automatic, manual, and direct drive configurations to suit specific project requirements.Features
Supports up to 4 axes of motion control.
Integrated proportional servo loop with overshoot compensation and gain switching.
Supports SSI absolute encoders (up to 200 kHz) and incremental encoders (up to 1000 kHz).
Configurable motion profiles including trapezoidal and parabolic implementations.
Adjustable acceleration times ranging from 8 ms to 10 seconds.
Positioning resolution between 0.5 and 1000 units per point.
Acquisition speed ranging from 54,000 to 270,000 points per minute.
Compatible with 10-30V and 5V DC incremental encoders.
Technical Specifications
Manufacturer
Schneider Electric
Product Line
Modicon Premium
Part Number
TSXCAY41
Power Consumption
10 to 17 W
Weight
0.45 kg
Installation Guidelines
Ensure the PLC rack is powered down before inserting or removing the TSXCAY41 module to prevent electrical damage.
Mount the module in a clean, dry environment within the specified operating temperature range.
Use shielded cabling for encoder inputs to minimize electromagnetic interference (EMI) in high-noise industrial environments.
Ensure proper grounding of the module chassis to the control cabinet backplane to maintain signal integrity.
Verify that all I/O wiring is securely terminated and conforms to local electrical codes.
FAQWhat type of encoders are compatible with the TSXCAY41?The module supports SSI absolute encoders (16 to 25 bits) and incremental encoders operating on 5V or 10-30V DC signals.How many axes can this module control?The TSXCAY41 is capable of managing up to four axes of motion.Which platform is this module designed for?This module is part of the Schneider Electric Modicon Premium automation platform.
3 in stock
Delivery within 48 hours, pay afterwards
Mid weeks Monday to friday we offer next day delivery if the product is on stock and exceptions on holidays.
Weekends We offer no deliveries in the weekends.
International Depending on where you’re located, we offer next day delivery. Check your status on this link
7 in stock
Delivery within 48 hours, pay afterwards
Mid weeks Monday to friday we offer next day delivery if the product is on stock and exceptions on holidays.
Weekends We offer no deliveries in the weekends.
International Depending on where you’re located, we offer next day delivery. Check your status on this link
DescriptionThe Honeywell 620-0020 is an industrial memory board engineered for program storage, data retention, and system memory expansion within Honeywell automation and control platforms. Providing 2 KB of memory capacity, this module is essential for storing critical operating parameters, application data, and control logic. Its robust, board-level architecture ensures reliable integration into controller racks and processor assemblies, supporting consistent performance in demanding environments such as power generation, chemical processing, and utility automation.Features
2 KB memory capacity for application and parameter storage.
Plug-in board architecture for seamless integration with compatible controller backplanes.
Low-power design to minimize system loading.
Engineered for continuous industrial operation and long-term data integrity.
Compact form factor suitable for high-density automation cabinets.
ApplicationsThis memory board is designed for use in Honeywell industrial control systems where reliable data preservation and rapid memory access are required to maintain system availability and reduce recovery time during maintenance or system restoration.Technical Specifications
Model
620-0020
Brand
Honeywell
Memory Capacity
2 KB
Power Consumption
Less than 2 W
Operating Temperature
0 to 60 deg C
Storage Temperature
-40 to 85 deg C
Mounting Method
Rack or Chassis
Installation Guidelines
Ensure the system power is completely disconnected before installing or removing the memory board.
Handle the module by its edges to prevent electrostatic discharge (ESD) damage to sensitive components.
Verify that the board is correctly aligned with the backplane connector before applying pressure to seat it.
Ensure the module is fully inserted and secured in the rack or chassis to prevent intermittent connections due to vibration.
Maintain proper ventilation within the control cabinet to ensure the ambient temperature remains within the specified 0 to 60 deg C operating range.
FAQWhat is the primary function of the 620-0020 memory board?The 620-0020 serves as a dedicated memory expansion and storage module, providing 2 KB of capacity to store control logic, application data, and system parameters for Honeywell controllers.Is this module suitable for high-temperature environments?The module is rated for an operating temperature range of 0 to 60 deg C. It should be installed in an environment that does not exceed these limits to ensure reliable data retention and hardware longevity.
7 in stock
Delivery within 48 hours, pay afterwards
Mid weeks Monday to friday we offer next day delivery if the product is on stock and exceptions on holidays.
Weekends We offer no deliveries in the weekends.
International Depending on where you’re located, we offer next day delivery. Check your status on this link
1 in stock
Delivery within 48 hours, pay afterwards
Mid weeks Monday to friday we offer next day delivery if the product is on stock and exceptions on holidays.
Weekends We offer no deliveries in the weekends.
International Depending on where you’re located, we offer next day delivery. Check your status on this link
DescriptionThe Allen-Bradley 1756-L64 is a high-performance Logix5564 controller module designed for the ControlLogix platform. This processor module provides robust computing power for complex industrial automation tasks, offering 16 MB of user memory to support large-scale control applications, high-speed motion control, and extensive data processing requirements.Features
16 MB of user memory for complex logic and data storage.
478 KB of I/O memory for efficient data handling.
Supports up to 128,000 digital I/O points.
Supports up to 4,000 analog I/O points.
Designed for seamless integration within the ControlLogix chassis environment.
Reliable operation with low thermal dissipation.
Technical Specifications
Model
1756-L64
Memory
16 MB User Memory
I/O Memory
478 KB
Max Digital I/O
128,000
Max Analog I/O
4,000
Current Draw (5.1V DC)
1200 mA
Current Draw (24V DC)
14 mA
Thermal Dissipation
11.9 BTU/hr
Isolation Voltage
30V Continuous
Installation Guidelines
Ensure the ControlLogix chassis is powered down before inserting or removing the 1756-L64 module.
Align the module carefully with the chassis slot guides to prevent damage to the backplane pins.
Secure the module using the top and bottom latches to ensure proper electrical contact and mechanical stability.
Maintain adequate clearance around the chassis for proper ventilation and cooling.
Follow standard ESD (Electrostatic Discharge) prevention practices when handling the module to protect sensitive internal components.
FAQWhat is the primary function of the 1756-L64?The 1756-L64 is a central processor unit (CPU) for the Allen-Bradley ControlLogix system, responsible for executing control logic, managing I/O communications, and coordinating system tasks.Is this module compatible with other ControlLogix components?Yes, the 1756-L64 is designed to operate within standard ControlLogix chassis and is compatible with the 1756 series I/O and communication modules.What is the power requirement for this processor?The module draws 1200 mA at 5.1V DC and 14 mA at 24V DC from the chassis backplane power supply.
1 in stock
Delivery within 48 hours, pay afterwards
Mid weeks Monday to friday we offer next day delivery if the product is on stock and exceptions on holidays.
Weekends We offer no deliveries in the weekends.
International Depending on where you’re located, we offer next day delivery. Check your status on this link
10 in stock
Delivery within 48 hours, pay afterwards
Mid weeks Monday to friday we offer next day delivery if the product is on stock and exceptions on holidays.
Weekends We offer no deliveries in the weekends.
International Depending on where you’re located, we offer next day delivery. Check your status on this link
DescriptionThe Allen-Bradley 1756-CN2RXT is a ControlLogix ControlNet interface module designed for high-performance industrial communication. This module supports redundant coaxial media and provides reliable data exchange within a ControlLogix system. It is specifically engineered for extended temperature environments, making it suitable for demanding industrial applications.Features
Supports 128 connections for robust network communication.
Features dual ControlNet BNC connectors for redundant coaxial media support.
Integrated USB network access point for simplified configuration and diagnostics.
Designed for operation in extreme temperatures ranging from -25 degC to +70 degC.
High-speed communication rate of 5 Mbps.
Technical Specifications
Product Model
1756-CN2RXT
Manufacturer
Allen-Bradley
Communication Rate
5 Mbps
Voltage
5.1 Volts DC
Current
1.3 Amperes
Power Dissipation
6.6 Watts
Connections
128
Operating Temperature
-25 to +70 degC
Installation Guidelines
Ensure the ControlLogix chassis is powered down before inserting or removing the module to prevent electrical damage.
The module should be installed in a standard ControlLogix I/O chassis.
Ensure proper grounding of the chassis and use shielded coaxial cables for ControlNet connections to minimize EMI interference.
Maintain adequate clearance around the module to ensure proper airflow and cooling, especially in high-temperature environments.
Follow standard ESD (Electrostatic Discharge) handling procedures when touching module components.
FAQWhat is the primary function of the 1756-CN2RXT?The 1756-CN2RXT is a communication bridge module that allows a ControlLogix controller to interface with the ControlNet network, facilitating real-time control and data transfer.Does this module support redundancy?Yes, this module is designed for redundant coaxial media, allowing for increased network reliability in critical control applications.
10 in stock
Delivery within 48 hours, pay afterwards
Mid weeks Monday to friday we offer next day delivery if the product is on stock and exceptions on holidays.
Weekends We offer no deliveries in the weekends.
International Depending on where you’re located, we offer next day delivery. Check your status on this link
4 in stock
Delivery within 48 hours, pay afterwards
Mid weeks Monday to friday we offer next day delivery if the product is on stock and exceptions on holidays.
Weekends We offer no deliveries in the weekends.
International Depending on where you’re located, we offer next day delivery. Check your status on this link
DescriptionThe Siemens Simatic S5 6ES5444-5AA11 is a ruggedized digital output interface module engineered for high-capacity Simatic S5-130 and S5-150 programmable logic controller environments. This module provides 16 discrete, isolated semiconductor output channels capable of switching substantial field loads directly from internal logic commands. Designed for heavy industrial automation, including automotive assembly, mining, and petrochemical refining, it ensures reliable signal execution and diagnostic efficiency.Features
16 discrete, isolated semiconductor output channels.
High-capacity switching: Supports up to 2 A continuous current per channel at 24 VDC.
Galvanic isolation: Optocoupled barrier between the logic backplane and field-side connections to mitigate electrical noise.
Integrated protection: Built-in electronic short-circuit and thermal overload protection for each channel.
Diagnostic feedback: Front-panel LED array for real-time channel state verification and rapid fault tracing.
Rugged construction: Designed to withstand elevated vibration profiles and harsh industrial electromagnetic environments.
ApplicationsThis module is suitable for driving high-current field actuators such as large solenoid valves, contactors, and motor starters directly, often eliminating the need for interposing relays. It is a standard component for S5-130/150 rack-based control systems in demanding industrial environments.Technical Specifications
Model
6ES5444-5AA11
System Compatibility
Siemens Simatic S5-130/150
Output Channels
16 discrete
Voltage Rating
24 VDC nominal
Current Rating
2 A maximum per channel
Protection
Electronic short-circuit and thermal overload
Power Consumption
15 W typical internal bus draw
Operating Temperature
0 to 60 deg C
Installation Guidelines
Ensure the PLC rack power is disconnected before installing or removing the module to prevent electrical damage.
Verify that the module is fully seated in the backplane slot and secured with the designated locking mechanisms.
Use shielded cabling for field connections to maintain electromagnetic compatibility (EMC) in high-noise environments.
Ensure adequate ventilation within the control cabinet to maintain operating temperatures below 60 deg C.
Follow standard ESD (Electrostatic Discharge) handling procedures when touching internal circuit components.
Check field wiring polarity against the module terminal map before applying power to prevent output stage damage.
FAQDoes this module require interposing relays for solenoid valves?No, the 6ES5444-5AA11 is designed to handle up to 2 A per channel, allowing for direct connection to most standard inductive loads like solenoid valves and contactors without external relays.What is the primary function of the front-panel LEDs?The LEDs provide visual confirmation of the individual channel states, allowing maintenance personnel to quickly identify active outputs and troubleshoot wiring or load faults directly at the rack.
4 in stock
Delivery within 48 hours, pay afterwards
Mid weeks Monday to friday we offer next day delivery if the product is on stock and exceptions on holidays.
Weekends We offer no deliveries in the weekends.
International Depending on where you’re located, we offer next day delivery. Check your status on this link
