Explore a full range of industrial automation products from major brands like ABB, Bently, Honeywell, GE, and more. IndustriaX Limited helps manufacturers source rare and hard-to-find components worldwide with fast delivery to minimize downtime.
All Products
-
ABB ABB RMBA-01-KIT Modbus RTU RS485 Communication Adapter
Product Description The ABB RMBA-01-KIT is a fieldbus communication adapter package developed to interface ABB variable frequency drives with Modbus RTU networks. It enables structured data exchange between drive controllers and higher-level systems such as PLCs, HMIs, and SCADA platforms through a serial RS-485 connection. This adapter is designed for direct integration into ABB drive control boards, allowing parameter access, status monitoring, and command control via Modbus registers. With built-in galvanic isolation, the module enhances signal integrity and protects connected devices from electrical noise and ground potential differences commonly found in industrial installations. The RMBA-01-KIT is widely implemented in drive-based automation systems where standardized serial communication and reliable data acquisition are required. Technical Specifications Parameter Description Product Type Modbus RTU Communication Adapter Kit Model RMBA-01-KIT Supported Protocol Modbus RTU (serial, asynchronous) Physical Interface RS-485 (2-wire or 4-wire selectable) Optional Interface Note RS-232 supported in certain system configurations Baud Rate Configurable, up to 115.2 kbps Isolation Galvanic isolation between drive and network Connectivity Screw terminal electrical connections Data Mapping Drive parameters mapped to Modbus holding registers (4xxxx) Installation Plug-in module for ABB drive control boards Compatible Drives ABB ACS series (ACS550, ACS800, others supporting fieldbus adapters) Operating Temperature Up to 40°C Dimensions 95 × 65 × 34 mm Weight 0.31 lbs Functional Characteristics Enables Modbus RTU communication for ABB drive systems Supports flexible RS-485 network topologies Integrated isolation improves reliability in electrically noisy environments Direct parameter access and control via Modbus register mapping Designed for seamless integration with ABB fieldbus adapter architecture Compact form factor suitable for drive cabinet installation Application Areas Variable speed drive monitoring and control PLC-based automation systems using Modbus RTU SCADA integration for process visualization and diagnostics Industrial data acquisition and parameter logging Retrofitting legacy drive systems with standardized communication FAQ Which ABB drives are compatible with the RMBA-01-KIT?It is commonly used with ACS550 and ACS800 drives, as well as other ABB models that support RMBA-01 fieldbus adapters. Does the module require external power?No. Power is supplied directly from the drive via the control board interface. What type of network wiring is supported?RS-485 2-wire and 4-wire configurations are supported, allowing flexible network design. Is isolation included in the communication interface?Yes, galvanic isolation is built in to protect both the drive and the communication network.
$200.00 $100.00
-
ABB ABB IIMCP02 Infi-90 Multibus Communication Processor Module
Product Description The ABB Bailey IIMCP02 is a Multibus Communication Processor Module developed for integration within ABB Infi-90 and Net-90 distributed control systems. It operates as a central processing and communication unit, managing high-speed data exchange between operator interfaces, control modules, and networked subsystems. Unlike simple interface modules, the IIMCP02 combines communication handling with real-time processing capabilities. It executes system-level coordination tasks, supports deterministic data transfer over SCSI-based architecture, and provides embedded diagnostic functions for monitoring system integrity. This makes it a key component in maintaining synchronization and operational continuity across distributed control environments. Its architecture is optimized for legacy DCS infrastructures where stable Multibus communication and predictable system response are required. Technical Specifications Parameter Description Product Type Multibus Communication Processor Module Model IIMCP02 Compatible Systems ABB Bailey Infi-90, Net-90 Processor Role Central communication and coordination processor Communication Interfaces SCSI, Multibus backplane Data Handling High-speed deterministic data exchange Core Functions Real-time logic execution, system synchronization, diagnostics Supported Consoles OIS 25, OIS 41, OIS 42, MCS Plus Mounting Method Rack-mounted via system backplane Power Supply Provided through system chassis Dimensions 124 × 126 × 22 mm Weight 0.6 kg Operating Environment Industrial control cabinets, continuous operation Key Functional Capabilities Centralized communication management for distributed DCS nodes SCSI-based high-throughput data exchange architecture Real-time processing for control logic and system coordination Built-in diagnostics for fault detection and system health monitoring Seamless interaction with operator interface stations and control processors Designed for deterministic and stable operation in legacy automation systems Application Scenarios Turbine and generator control systems in power plants Continuous process control in oil, gas, and chemical industries Operator interface communication in legacy DCS environments Marine and offshore automation platforms Industrial systems requiring synchronized multi-node communication FAQ What role does the IIMCP02 play in an Infi-90 system?It acts as the communication and processing hub, coordinating data exchange and executing system-level control tasks. Is this module purely for communication?No. In addition to communication, it performs real-time processing, synchronization, and diagnostic monitoring. Which operator stations are compatible?It supports OIS 25, OIS 41, OIS 42, and MCS Plus systems. Are there different physical versions of this module?Yes. Dimensions and weight may vary slightly depending on hardware revision or production batch.
$200.00 $100.00
-
ABB ABB INICT03A Infi-90 Cnet Computer Transfer Module
Product Description The ABB Bailey INICT03A is a dedicated communication interface engineered for seamless data exchange between the Infi-Net control network and external computer systems within the ABB Infi-90 DCS architecture. It functions as a high-reliability bridge, enabling supervisory systems, historians, and operator workstations to access real-time process data with minimal latency. Designed for continuous industrial operation, this module supports both legacy and higher-speed communication standards, ensuring compatibility across a wide range of host platforms. Its internal memory structure and deterministic communication handling make it suitable for applications requiring consistent data throughput and system stability. The INICT03A module is typically deployed in mission-critical environments where uninterrupted communication between distributed controllers and centralized computing systems is essential. Technical Specifications Parameter Description Product Type Infi-Net to Computer Communication Module Model INICT03A System Compatibility ABB Bailey Infi-90 DCS Memory Capacity 512 KB ROM, 2 MB RAM Tag Capacity Up to 30,000 point definitions Communication Interfaces RS-232-C serial, SCSI interface Data Transfer Rate Up to 19.2 kbaud (RS-232-C); up to 4 MB/s (SCSI) Power Supply +5 VDC, approx. 2 A Power Consumption 10 W Physical Dimensions 37 × 317 × 178 mm Mounting Rack-mounted module (Infi-90 system chassis) Operating Environment Industrial control cabinets, continuous duty Key Features Deterministic data transfer between Infi-Net and external computing systems Dual communication interface support for flexible integration High tag capacity suitable for large-scale process applications Stable memory architecture for long-term, uninterrupted operation Designed for compatibility with legacy and modern supervisory systems Optimized for continuous process monitoring and data acquisition Typical Applications Distributed control systems in power generation plants Process control networks in petrochemical and refining facilities Manufacturing execution and monitoring systems Centralized data acquisition and historian integration Industrial SCADA and supervisory environments FAQ What is the primary role of the INICT03A module?It serves as a communication bridge between the Infi-Net control network and external computer systems, enabling data exchange for monitoring and control. Does it support modern communication protocols?The module primarily supports RS-232-C and SCSI interfaces, which are standard for legacy Infi-90 systems. Integration with modern systems may require protocol converters. How many process points can it handle?It supports up to 30,000 tag definitions, making it suitable for medium to large-scale control systems. Is it suitable for critical industrial environments?Yes, it is designed for high-reliability applications where continuous data communication is required.
$200.00 $100.00
-
ABB ABB IMMPI01 Processor Interface Module
Product Overview The ABB IMMPI01 is a multifunction processor interface board designed to bridge communication between host computers and ABB INICT03 control modules within Bailey Infi 90 and Symphony Plus environments. It functions as a system-level communication gateway, enabling structured data exchange between supervisory computing platforms and industrial control hardware. The module is implemented as a single-slot PCB with embedded microprocessor logic for protocol handling and signal routing. Technical Specifications Parameter Specification Model IMMPI01 Manufacturer ABB Module Type Multi-Function Processor Interface System Compatibility ABB Bailey Infi 90, Symphony Plus, Harmony control systems Communication Interfaces 2 × RS-232-C ports, 1 × SCSI interface Function Host-to-controller communication bridge Power Supply +5 VDC ±5% Current Consumption 415 mA Power Dissipation ~2.1 W typical Board Architecture Single PCB, one-slot module Connector P1 +5 VDC power input and common ground Connector P2 Not utilized Connector P3 Interface to NTMP01 termination unit Connector P6 Link to INICT03 module Operating Temperature -40°C to +70°C Humidity Range 5–95% RH non-condensing Vibration Rating 5 g RMS (10–500 Hz) Shock Resistance 30 g, 11 ms half-sine EMC Standards EN 50081-1, EN 50082-2, EN 55011, EN 55012 Dimensions 17.8 × 5.1 × 33.0 cm Weight 0.3 kg Functional Characteristics Dual-interface communication architecture supporting RS-232-C and SCSI Configurable RS-232 operation as DCE or DTE depending on system topology Microprocessor-controlled data handling for deterministic communication flow Direct integration with INICT03 module via dedicated ribbon connection Compact single-slot design for standard ABB module mounting units High immunity to electromagnetic interference in industrial cabinet environments Stable long-term operation under continuous control system workloads System Integration ABB Bailey Infi 90 control architecture ABB Symphony Plus distributed control systems ABB Harmony / IMMFP-based processor environments INICT03 module communication backbone Application Areas Process control system communication interfacing Power plant control system data exchange layers Petrochemical plant supervisory system integration Industrial computing-to-controller communication bridges Legacy ABB DCS modernization and expansion projects FAQ Q1: What is the primary function of the IMMPI01 module?It provides a communication interface between host computers and ABB INICT03 control modules. Q2: Does it support multiple communication standards?Yes, it supports both RS-232-C and SCSI interfaces for flexible integration. Q3: Can RS-232-C be configured for different roles?Yes, it can operate as either DCE or DTE depending on system configuration.
$200.00 $100.00
-
ABB ABB INNPM22 | Symphony Infi90 Network Processor Module
Product Overview The ABB INNPM22 is a communication and data processing module used within ABB Symphony and Bailey Infi 90 control architectures. It functions as a central network interface unit, managing data exchange between controllers, I/O subsystems, and supervisory control layers. This module is designed for real-time industrial communication tasks, supporting deterministic data transfer and coordination across distributed control networks. It is typically deployed as a system-level processor for routing and synchronization of control information. Technical Specifications Parameter Specification Model INNPM22 Manufacturer ABB Module Type Network Processor / Communication Module System Compatibility ABB Symphony Plus, Bailey Infi 90, Harmony HR Series Processing Function Real-time communication and data routing Supported Protocols Ethernet, Modbus, PROFIBUS, DeviceNet (multi-protocol support depending on system configuration) Data Refresh Rate ≤ 1 ms cycle (system-dependent) Power Supply 24 VDC ±10% Power Consumption ≤ 8 W Memory Backup 1 × lithium coin-cell battery Operating Temperature -20°C to +70°C Storage Temperature -40°C to +85°C Humidity Range 5–95% RH non-condensing Protection Class IP20 (cabinet-mounted use) Dimensions 120 × 32 × 110 mm Weight 0.45 kg Mounting DIN rail or rack installation Diagnostics CRC validation, redundancy handling, link monitoring Functional Characteristics Centralized communication processor for distributed control networks Supports deterministic high-speed data exchange between system nodes Multi-protocol architecture enables flexible integration across platforms Built-in communication diagnostics for network integrity monitoring Designed for redundant and fault-tolerant control system architectures Stable operation under electrical noise and industrial vibration conditions Supports hot-swappable configuration in compatible system racks System Compatibility ABB Bailey Infi 90 Control System ABB Symphony Plus Distributed Control System ABB Harmony Rack HR Series ABB legacy-to-modern DCS integration environments Application Areas Power generation plant control and monitoring networks Petrochemical distributed process control systems Steel manufacturing automation communication backbone Utility and grid data acquisition systems Large-scale industrial control network synchronization Process plant supervisory and control layer integration FAQ Q1: What is the main role of the INNPM22 module?It manages communication between controllers, I/O modules, and higher-level supervisory systems. Q2: Does it support multiple communication protocols?Yes, it supports Ethernet and several industrial protocols depending on system configuration. Q3: Can it operate in redundant control architectures?Yes, it is designed to support redundancy and fault-tolerant system setups.
$200.00 $100.00
-
ABB ABB NTR012-A | Bailey Infi90 Digital Input Termination
Product Overview The ABB NTDI21-A is a dedicated digital input termination interface designed for ABB Bailey Infi 90 and modern Symphony/S800-based control environments. It is used to adapt field-level dry contact signals into system-recognized digital inputs with reliable electrical isolation and stable transmission characteristics. The module is engineered for high channel density signal acquisition, offering consistent performance in environments where electrical noise, grounding issues, and long cable runs can impact signal integrity. Technical Specifications Parameter Specification Model NTDI21-A Input Channels 16 independent isolated digital inputs Input Type Dry contact (voltage-free contact) Nominal Input Voltage 24 VDC (operating range 18–32 VDC) Electrical Isolation 500 VAC channel-to-channel, 1500 VAC channel-to-system Response Time ≤ 5 ms Power Consumption 1.5 W typical, max 2.5 W EMC Protection EN 61000-6-2 / EN 61000-6-4 compliant Operating Temperature -20°C to +70°C Storage Temperature -40°C to +85°C Humidity 5–95% RH non-condensing Mounting Method DIN rail or panel mounting Protection Level IP20 Wiring Range 0.5–2.5 mm² (20–14 AWG) Housing Material Flame-retardant industrial polymer (UL 94 V-0) Dimensions 180 × 176 × 20 mm Weight 0.36 kg Functional Characteristics 16-channel isolated digital input architecture for high-density signal handling Channel-level galvanic isolation to eliminate ground loop interference Stable dry contact signal acquisition with fast response performance Integrated diagnostic LED indicators per channel for maintenance visibility Designed for seamless integration with ABB control system backplanes Robust EMC design suitable for electrically noisy industrial environments Supports continuous operation in mission-critical process control systems System Compatibility ABB Bailey Infi 90 ABB Symphony® DCS ABB Freelance® Control Systems ABB Ability™ System 800xA (via compatible I/O architecture) Application Areas Power generation control and monitoring systems Petrochemical and refinery automation Transportation signaling and infrastructure control Water treatment and utility monitoring systems Process industry digital signal acquisition Distributed control system modernization projects FAQ Q1: What type of input signals does the NTDI21-A support?It supports dry contact (voltage-free) digital input signals commonly used in industrial field devices. Q2: How does the module improve signal reliability?Each channel is galvanically isolated, reducing noise interference and preventing ground loop issues. Q3: Can it be used in harsh industrial environments?Yes, it is designed for extended temperature ranges and high EMC immunity environments.
$200.00 $100.00
-
ABB ABB NTDI21-A | Bailey Infi90 Digital Input Termination
Product Overview The ABB NTDI21-A is a dedicated digital input termination interface designed for ABB Bailey Infi 90 and modern Symphony/S800-based control environments. It is used to adapt field-level dry contact signals into system-recognized digital inputs with reliable electrical isolation and stable transmission characteristics. The module is engineered for high channel density signal acquisition, offering consistent performance in environments where electrical noise, grounding issues, and long cable runs can impact signal integrity. Technical Specifications Parameter Specification Model NTDI21-A Input Channels 16 independent isolated digital inputs Input Type Dry contact (voltage-free contact) Nominal Input Voltage 24 VDC (operating range 18–32 VDC) Electrical Isolation 500 VAC channel-to-channel, 1500 VAC channel-to-system Response Time ≤ 5 ms Power Consumption 1.5 W typical, max 2.5 W EMC Protection EN 61000-6-2 / EN 61000-6-4 compliant Operating Temperature -20°C to +70°C Storage Temperature -40°C to +85°C Humidity 5–95% RH non-condensing Mounting Method DIN rail or panel mounting Protection Level IP20 Wiring Range 0.5–2.5 mm² (20–14 AWG) Housing Material Flame-retardant industrial polymer (UL 94 V-0) Dimensions 180 × 176 × 20 mm Weight 0.36 kg Functional Characteristics 16-channel isolated digital input architecture for high-density signal handling Channel-level galvanic isolation to eliminate ground loop interference Stable dry contact signal acquisition with fast response performance Integrated diagnostic LED indicators per channel for maintenance visibility Designed for seamless integration with ABB control system backplanes Robust EMC design suitable for electrically noisy industrial environments Supports continuous operation in mission-critical process control systems System Compatibility ABB Bailey Infi 90 ABB Symphony® DCS ABB Freelance® Control Systems ABB Ability™ System 800xA (via compatible I/O architecture) Application Areas Power generation control and monitoring systems Petrochemical and refinery automation Transportation signaling and infrastructure control Water treatment and utility monitoring systems Process industry digital signal acquisition Distributed control system modernization projects FAQ Q1: What type of input signals does the NTDI21-A support?It supports dry contact (voltage-free) digital input signals commonly used in industrial field devices. Q2: How does the module improve signal reliability?Each channel is galvanically isolated, reducing noise interference and preventing ground loop issues. Q3: Can it be used in harsh industrial environments?Yes, it is designed for extended temperature ranges and high EMC immunity environments.
$200.00 $100.00
-
ABB ABB IMFCS01 Field Control Processor Module
Product Description The IMFCS01 is a core field-level processing module within ABB’s Symphony Plus and Bailey INFI 90 distributed control architectures. It functions as the primary execution engine for control strategies, handling real-time automation logic, I/O coordination, and communication between field devices and supervisory control layers. Designed for continuous process environments, this module forms the central processing element of a Process Control Unit (PCU), ensuring deterministic execution of control loops and reliable system-level coordination across distributed I/O networks. Technical Specifications Model: IMFCS01Manufacturer: ABBProduct Type: Field Control Processor (FCP) ModuleSystem Platforms: Symphony Plus / Bailey INFI 90 Processing & Control Performance Real-time control execution with millisecond-level response High-speed embedded microprocessor for deterministic automation tasks Supports complex control logic execution and sequence processing Optimized for continuous industrial process operation Memory & System Architecture Non-volatile configuration memory for control strategy retention Volatile working memory for runtime execution Modular architecture supporting distributed control system scaling Communication Interfaces INFI-NET network compatibility Controlway backplane communication support Peer-to-peer module communication capability High-speed data exchange with I/O subsystems and supervisory systems I/O Management Capability Supports multiple I/O modules within a single Process Control Unit Coordinates analog and digital signal processing at system level Ensures synchronized data acquisition and control output execution Physical Characteristics Rack-mounted control processor module Compact industrial card format for ABB DCS cabinets Designed for high-density system integration Engineered for continuous duty operation in harsh environments Electrical Characteristics (Typical Configuration) +5 VDC logic supply ±15 VDC auxiliary supply rails Low-power embedded control architecture optimized for efficiency Environmental Performance Industrial-grade design for 24/7 operation Suitable for high-temperature and high-reliability environments Supports redundant system configurations for fail-safe operation Application Areas Power generation control systems (boiler, turbine, balance-of-plant) Petrochemical and refinery process automation Pulp and paper production systems Metallurgical process control environments Large-scale distributed industrial automation platforms Functional Overview Executes real-time control algorithms for process automation Synchronizes distributed I/O operations within control units Maintains deterministic system behavior across control loops Acts as the central processing node in ABB DCS architecture Supports redundant deployment for critical process safety FAQ Q: What role does the IMFCS01 play in a DCS system?A: It serves as the main field control processor, executing control logic and coordinating communication between I/O modules and supervisory systems. Q: Can this module operate in redundant configurations?A: Yes, it supports redundant setups for high-availability industrial applications. Q: Is it still used in modern systems?A: It is primarily used in existing ABB Symphony Plus and Bailey INFI 90 installations as a core control processor or replacement module.
$200.00 $100.00
-
ABB ABB TPS02 Turbine Protection Slave Module
Product Description The TPS02R is a turbine protection slave module developed for integration within ABB-based protection and monitoring architectures. It is designed to operate as a distributed interface node within turbine supervisory systems, supporting acquisition and relay of protection-related signals from field instrumentation to higher-level control and safety logic. This module is typically used in turbine protection chains where fast response, signal integrity, and reliable data exchange are required for safeguarding rotating equipment under dynamic operating conditions. Technical Specifications Model: TPS02RManufacturer: ABB (REFU/Turbine Protection Series)Product Type: Turbine Protection Slave Unit System Function Serves as a slave interface within turbine protection architectures Handles protection-related signal transmission and coordination Supports integration into turbine supervisory and safety systems Physical Characteristics Dimensions: 177.8 × 50.8 × 25.4 mm (7.0 × 2.0 × 1.0 in) Weight: 0.4 kg Compact module form factor designed for cabinet or rack installation Rugged electronic assembly for continuous industrial operation Electrical / Functional Behavior Designed for turbine protection signal handling and relay communication Interfaces with supervisory protection modules in ABB systems Supports distributed signal exchange within protection architecture Optimized for fast response in safety-related monitoring loops System Integration Compatible with ABB turbine protection system architectures Used in distributed protection and monitoring configurations Functions as a subordinate module in protection control hierarchy Enables structured signal routing for turbine safety logic Application Areas Steam and gas turbine protection systems Turbine supervisory and safety monitoring platforms Power generation equipment protection architectures High-speed rotating machinery safety circuits Industrial turbine control and alarm systems Functional Overview Acts as a communication and signal interface in turbine protection chains Supports real-time exchange of protection-related signals Ensures structured signal distribution across protection modules Contributes to turbine trip and alarm logic coordination FAQ Q: What is the main role of the TPS02R module?A: It functions as a slave interface unit within turbine protection systems, supporting signal handling and coordination in safety architectures. Q: Is this a standalone controller?A: No. It operates as part of a distributed turbine protection system and requires integration with ABB protection modules. Q: Where is it typically installed?A: It is installed inside turbine control or protection cabinets as part of a modular system configuration.
$200.00 $100.00
-
ABB ABB NTCL01-A Communication Termination Unit
Product Description The NTCL01-A is a dedicated communication termination module developed by ABB for Bailey INFI 90 and Symphony Plus distributed control environments. It functions as the physical endpoint for INFI-NET communication loops, ensuring reliable signal continuity between network interface modules and the plant-wide control communication backbone. This unit is installed within control cabinets and serves as an essential interface element for linking loop communication modules and network slave devices into a stable and structured DCS communication architecture. Technical Specifications Model: NTCL01-AManufacturer: ABBProduct Type: Communication Termination Unit (TCL)System Platforms: INFI 90 / Symphony Plus DCS Communication Functionality Terminates INFI-NET loop communication circuits Provides stable interface for control network signal routing Ensures controlled impedance matching for communication integrity Supported Modules INNIS01 Network Interface Slave Module INLIM03 Loop Interface Module Data Communication Characteristics Supports INFI-NET communication protocol Transmission rate: up to 10 Mbaud Loop capacity: up to 32 modules per controlway segment Signal type: Twinaxial or coaxial selectable via internal jumper configuration Physical Characteristics Mounting: Rack-mounted termination unit for DCS cabinet integration Dimensions (approx.): 96.52 × 236.22 × 220.98 mm Weight: 0.65 kg Installation location: INFI 90 system cabinet backplane area Cable Interface Compatible with twinaxial cabling Compatible with coaxial cabling Configuration selectable via jumper settings Designed for flexible field installation requirements Environmental & Operational Design Industrial-grade construction for continuous duty operation Suitable for plant control room and cabinet environments Designed for long-term reliability in ABB legacy DCS systems System Role Overview Acts as termination point for INFI-NET communication loops Stabilizes data exchange between network and control modules Supports distributed system scalability within ABB DCS architecture Maintains communication integrity across multi-module configurations Application Areas Power generation control systems (Bailey INFI 90 installations) Process industry distributed control systems Chemical and petrochemical plant communication networks Legacy DCS modernization and module replacement projects Industrial control cabinet communication infrastructure FAQ Q: What is the main function of the NTCL01-A?A: It provides termination for INFI-NET communication loops, ensuring stable data transmission within ABB DCS systems. Q: Which modules are compatible with this unit?A: It is commonly used with INNIS01 and INLIM03 interface modules. Q: Can it support both coaxial and twinaxial cables?A: Yes, cable type selection is configurable via internal jumper settings.
$200.00 $100.00
-
ABB ABB 6640635A1 NTHS03 INFI 90 Analog Input Module
Product Description The 6640635A1 (NTHS03 ASSY) from ABB is a legacy analog input interface module designed for integration within INFI 90 and Symphony Harmony distributed control system architectures. It functions as a signal acquisition and conversion node, translating analog process signals from field instrumentation into digital data usable by the control system CPU. This module is typically installed in rack-based DCS environments where stable long-term operation, deterministic signal handling, and high channel density are required for process automation and regulatory control loops. Technical Specifications Model: 6640635A1 (NTHS03 ASSY)Manufacturer: ABBProduct Type: Analog Input / Control Interface ModuleSystem Platforms: INFI 90 / Symphony Harmony DCS Signal Processing Function Accepts standard industrial analog signals (e.g., 4–20 mA, voltage inputs) Performs analog-to-digital conversion for process control systems Supports continuous real-time data acquisition for control loops Control System Role Interface between field transmitters and DCS controller Supports process variables such as pressure, temperature, and flow Enables closed-loop automation and supervisory control logic Hardware Characteristics Module type: Rack-mounted control board assembly (NTHS03 ASSY) Form factor: Designed for ABB DCS card rack installation Weight: 0.56 kg Construction: Industrial-grade electronic assembly for continuous duty Electrical & Functional Behavior Input types: Analog current and voltage signals Signal conversion: High-resolution A/D conversion for process accuracy Communication: Native compatibility with INFI 90 and Symphony Harmony backplanes Operating logic: Supports distributed control system scan cycles System Integration Fully compatible with ABB Bailey INFI 90 architecture Designed for Symphony Harmony DCS environments Supports modular expansion within rack-based I/O systems Integrates with supervisory and process control layers Reliability & Operation Designed for continuous 24/7 industrial operation Suitable for mission-critical process control applications Built for long lifecycle deployment in legacy automation systems Application Areas Power generation control systems (boiler, turbine, balance-of-plant) Chemical and petrochemical process automation Pharmaceutical production monitoring systems Metallurgical and heavy industrial process control Legacy DCS modernization and spare module replacement Functional Overview Converts analog process signals into digital control data Maintains signal stability across distributed I/O networks Supports deterministic control loop execution within DCS Acts as a bridge between field instrumentation and central control logic FAQ Q: Is this module still used in modern systems?A: It is primarily used in existing ABB INFI 90 and Symphony Harmony installations as a replacement or spare component. Q: What signals can it process?A: It typically handles standard analog inputs such as 4–20 mA current loops and voltage-based transmitter outputs. Q: Can it be used outside ABB systems?A: No. It is designed specifically for ABB INFI 90 and Symphony Harmony DCS architectures.
$200.00 $100.00
-
ABB ABB NTAI06 Analog Input Termination Module
Product Description The NTAI06 from ABB is a dedicated analog input termination module engineered for structured signal interface management in industrial control architectures. It is designed to support ASI and NKAS systems by providing stable and organized termination points for multi-channel analog input wiring. This unit simplifies field wiring consolidation and improves signal integrity between process instrumentation and control system I/O layers. Its mechanical layout and channel density make it suitable for panel-level integration where space efficiency and reliable signal distribution are required. Technical Specifications Model: NTAI06Manufacturer: ABBProduct Type: Analog Input Termination Module Channel Configuration Total channels: 16 analog input terminations Signal type: Multi-channel analog signal interface support Purpose: Field signal aggregation and termination Mechanical Dimensions Depth: 96.52 mm Height: 236.22 mm Width: 218.44 mm Weight: 0.635 kg Electrical / Interface Characteristics Designed for analog input signal termination Compatible systems: ASI, NKAS Supports structured wiring for control system I/O modules No active signal processing (passive termination architecture) Environmental & Compliance WEEE category: 5 (small electrical equipment) Operating design: Industrial cabinet installation SCIP reference: fd15e500-2c3b-4af9-a5c7-9b0699d83967 HS Code: 85371091 (control and electrical distribution equipment class) Mechanical Construction Compact DIN-panel oriented design Industrial-grade housing for long service life Optimized for high-density termination wiring layouts System Function Overview Provides centralized termination for analog input channels Reduces wiring complexity between field devices and control modules Improves signal routing organization in distributed I/O systems Ensures consistent electrical connectivity for multi-channel analog systems Typical Applications Substation and grid automation systems Process plant analog signal interfacing Distributed control system (DCS) signal termination Retrofit upgrades of legacy analog input architectures Multi-channel instrumentation consolidation panels FAQ Q: Does this module perform signal processing?A: No. The NTAI06 is a passive termination unit designed only for structured signal connection, not signal conditioning. Q: Which systems is it compatible with?A: It is designed for ABB ASI and NKAS system architectures. Q: Can it be used in high-density control cabinets?A: Yes, its compact footprint is specifically intended for space-optimized panel installations.
$200.00 $100.00
-
ABB ABB NTCL01 Communication Link Termination Unit
Product Overview The NTCL01 is an INFI-Net communication link termination unit used in ABB INFI 90 distributed control systems. It provides the physical interface required for linking network communication modules, ensuring stable signal transfer between system nodes and communication hardware. This unit is intended for cabinet installation and is typically deployed as part of ABB’s structured control network architecture where reliable data exchange between modules is required. Functional Role The termination unit is used to interface communication hardware within the system, primarily supporting: INFI-Net communication link routing Integration of network interface modules Signal termination for system communication channels It works in conjunction with compatible modules such as INNIS01 and related network components to maintain structured and stable communication paths. Technical Specifications Parameter Specification Model NTCL01 Product Type INFI-Net Communication Link Termination Unit System Compatibility ABB INFI 90 / INFI-Net architecture Supported Modules NIS, NKLS, INNIS01 (system dependent) Function Communication link termination and interface routing Mounting Type Cabinet / rack installation Dimensions (L × W × H) 96.52 × 220.98 × 236.22 mm Metric Dimensions 9.65 × 22.10 × 23.62 cm Weight 0.476 kg Material Role Passive interface and termination structure Electrical Function Signal routing and network interface support System Integration The NTCL01 operates as a passive interface unit within the INFI 90 architecture. It does not process control logic but provides structured termination for communication pathways, ensuring consistent network connectivity between distributed system modules. It is typically installed alongside INNIS01 network interface modules and other ABB communication components. Design Characteristics The module is engineered as a non-processing hardware interface with emphasis on mechanical stability and signal routing organization. Its compact enclosure allows efficient use of cabinet space while maintaining proper separation of communication lines. Typical Applications INFI 90 distributed control communication networks Power generation control system linking Industrial process data routing systems Multi-module ABB control cabinet architectures Plant-level network communication termination Frequently Asked Questions Q1: Does the NTCL01 perform data processing?No. It functions only as a physical communication termination and interface unit. Q2: Is it compatible with INNIS01?Yes. It is commonly used together with INNIS01 in INFI-Net communication architectures. Q3: Does it require configuration or programming?No configuration is required. It operates as a passive hardware component. Q4: What is its main system role?It provides structured termination and routing for INFI-Net communication links.
$200.00 $100.00
-
ABB ABB INNIS01 INFI 90 Network Interface Module
Product Overview The INNIS01 is a dedicated network interface slave module used within ABB INFI 90 OPEN and Symphony Harmony distributed control platforms. It serves as a communication gateway that links controller-level modules with plant-wide supervisory networks, enabling coordinated data exchange across large-scale industrial systems. The module is designed for rack-based installation and operates as a key node within ABB’s distributed control communication architecture. System Function This unit provides the communication pathway between: Process control units I/O and interface modules Operator stations and engineering systems Higher-level plant network infrastructure It ensures synchronized data transfer between field-level control hardware and supervisory-level applications. Technical Specifications Parameter Specification Model INNIS01 Product Type Network Interface Slave Module System Compatibility ABB INFI 90 OPEN / Symphony Harmony Memory Capacity 208 KB RAM / 64 KB ROM Communication Speed 2 Mbaud / 10 Mbaud selectable Network Capacity Up to 62,500 nodes per system Loop Capacity Up to 250 nodes per loop Interface Support PCU, MCS, OIS, ICI compatible interfaces Power Supply Backplane powered +5 VDC Consumption ~900 mA (4.5 W) +15 VDC Consumption ~5 mA (0.08 W) -15 VDC Consumption ~200 mA (3.0 W) Mounting Type Single slot INFI 90 module rack Weight 0.93 kg Communication Architecture The INNIS01 operates as a high-speed network node within ABB’s distributed control system structure. It supports multiple communication rates and enables scalable system expansion through loop-based architecture. Its design allows integration of multiple controller and interface types within a unified network topology, supporting large distributed installations. System Integration The module occupies one slot in the INFI 90 OPEN mounting rack and interfaces directly with the system backplane. It acts as a bridge between control hardware and plant-level communication networks without requiring external configuration tools at the module level. Electrical and Operational Characteristics Power is supplied through the system backplane, eliminating the need for external wiring. The module is optimized for continuous industrial operation and designed to maintain communication stability under long-duration runtime conditions. Typical Applications Power plant distributed control networking Chemical process control communication systems Oil and gas facility data integration networks Large-scale manufacturing control architectures Multi-node industrial automation systems Frequently Asked Questions Q1: Does the INNIS01 perform control logic processing?No. It functions solely as a communication interface module. Q2: Can it operate independently?No. It must be installed within a compatible ABB INFI 90 or Symphony Harmony system. Q3: How many nodes can it support?It supports up to 62,500 nodes across the system architecture. Q4: Does it require external power wiring?No. Power is supplied directly through the system backplane.
$200.00 $100.00
-
ABB ABB NTMP01 Processor Termination Unit
Product Overview The NTMP01 is a Multi-Function Processor Termination Unit developed for ABB INFI 90 OPEN and Symphony Harmony distributed control architectures. It acts as the interface layer between Multi-Function Processor (MFP) modules and external field wiring, ensuring stable signal distribution, communication routing, and power interfacing within the control cabinet. The unit is designed for cabinet-based installation and supports system-level integration of processor modules with field devices in complex process control environments. Functional Role This termination unit provides the physical and electrical connection point for MFP-based systems. It supports: Digital and analog signal termination Communication channel routing Power distribution to connected processor modules It ensures structured wiring organization and reduces direct field wiring complexity between control hardware and process instrumentation. Technical Specifications Parameter Specification Model NTMP01 Product Type Multi-Function Processor Termination Unit System Compatibility ABB INFI 90 OPEN / Symphony Harmony DCS Supported Modules BRC, MFP, IET, ICT, NKTU (system dependent) Communication Interfaces 2 × RS-232-C or 1 × RS-232-C + 1 × RS-485 Control Link Dedicated control station serial communication Signal Types Digital and analog I/O termination Power Distribution Regulated supply to connected modules Operating Temperature 0°C to 70°C Humidity Range 5%–90% RH (non-condensing) Cable Rating PVC (80°C / 300 V) or PLTC (90°C / 300 V) Mounting Type Cabinet-mounted termination assembly Weight 0.3 kg Electrical and Communication Design The NTMP01 supports mixed serial communication architectures, enabling flexible integration with both RS-232-C and RS-485 based control networks. It provides centralized routing for control station communication links while maintaining electrical separation between field wiring and processor logic. Signal integrity is maintained through controlled impedance routing and system-defined grounding practices. Environmental and Installation Considerations The unit is designed for installation within ABB-certified control cabinets. No additional cooling is required when operated within specified environmental limits. To minimize electromagnetic interference effects, installation guidelines recommend: Maintaining minimum separation from communication equipment Keeping cabinet doors closed during operation Following ABB wiring and grounding standards System Integration The NTMP01 operates as a passive system interface component within ABB distributed control architectures. It does not perform logic processing but ensures structured connectivity between MFP modules and field systems. It is typically installed alongside processor and communication modules in modular control racks. Typical Applications Distributed process control system interfacing Power plant control cabinet integration Chemical processing control architectures Industrial automation signal routing systems Multi-module ABB Symphony Harmony installations Frequently Asked Questions Q1: Does the NTMP01 perform control logic processing?No. It functions strictly as a termination and interface unit. Q2: Is it compatible with non-ABB systems?No. It is designed specifically for ABB INFI 90 and Symphony Harmony platforms. Q3: Does it require configuration or programming?No programming is required. It operates as a passive hardware interface. Q4: What is its main role in the system?It provides structured signal termination, communication routing, and power distribution between MFP modules and field wiring.
$200.00 $100.00
-
ABB ABB NTR002-A Temperature Input Interface Module
Product Overview The NTR002-A is a precision temperature acquisition module developed for ABB distributed control environments, including Symphony Plus and INFI 90 systems. It is engineered to translate low-level sensor signals from RTDs and thermocouples into high-resolution digital data for process monitoring and control applications. The module is designed for installation within control cabinets where stable measurement performance and long-term signal integrity are required under continuous industrial operation. Functional Description This interface module processes analog temperature signals from multiple sensor types and converts them into digital values for the control system. It supports both resistance temperature detectors and thermocouple inputs, allowing flexible deployment across different measurement points. Signal conditioning, linearization, and conversion are performed internally to ensure stable and accurate temperature representation under varying process conditions. Technical Specifications Parameter Specification Model NTR002-A System Compatibility ABB Symphony Plus / INFI 90 DCS Sensor Types RTD and Thermocouple Input Channels 2 independent channels Conversion Resolution 16-bit analog-to-digital Measurement Accuracy ±0.1°C Temperature Range –200°C to 1800°C (sensor dependent) Installation Type Cabinet-mounted module Signal Processing Internal linearization and filtering Environmental Design Industrial-grade rugged enclosure Performance Characteristics The module is optimized for high-resolution temperature measurement in critical process environments. The 16-bit conversion architecture ensures fine signal granularity, while internal compensation algorithms maintain stability across wide temperature ranges. It is suitable for applications requiring consistent long-term drift performance and minimal calibration drift. System Integration The unit integrates directly into ABB distributed control architectures, communicating with the host controller via dedicated system backplane interfaces. Configuration is handled at the system level, requiring no local programming. Its compact form factor allows dense installation in control panels where space optimization is required. Typical Applications Power generation boiler and turbine monitoring Chemical reactor temperature control systems Metallurgical furnace and high-heat process monitoring Food and beverage thermal process regulation General-purpose industrial temperature acquisition systems Frequently Asked Questions Q1: Can this module accept both RTD and thermocouple inputs simultaneously?Yes. Each channel supports configurable sensor types depending on system setup. Q2: Does the module require calibration after installation?No field calibration is typically required, as signal conditioning is handled internally. Q3: Is it suitable for high-temperature industrial environments?Yes. It is designed for extended operation across a wide industrial temperature range. Q4: Does it perform signal conversion externally or internally?All signal conditioning and A/D conversion are performed within the module.
$200.00 $100.00
-
General Electric GE Fanuc IC200UEX214 VersaMax 28 Point Expansion Module
Product Overview The IC200UEX214 is a VersaMax discrete I/O expansion module designed to extend the input and output capacity of GE Fanuc Micro PLC systems. It provides additional field signal handling capability while maintaining consistent 24 VDC signal standards across all channels. This module is typically used in applications where the base PLC requires increased I/O density without replacing the main controller. Functional Description The unit expands system capacity by adding: 16 digital input channels for field signal acquisition 12 digital output channels for device actuation All signals operate at 24 VDC, ensuring direct compatibility with standard industrial sensors, switches, and actuators. The module communicates with the main PLC via the VersaMax backplane architecture. Technical Specifications Parameter Specification Model IC200UEX214 Total I/O Points 28 Digital Inputs 16 × 24 VDC Digital Outputs 12 × 24 VDC System Voltage 24 VDC nominal Sensor Power Supply 200 mA @ 24 VDC Power Consumption ~5 W Compatible CPUs VersaMax Micro PLC series Expansion Capacity 1 to 4 expansion units per Micro PLC system Communication Backplane-based internal bus Mounting VersaMax rack installation Weight 1.41 lbs System Architecture The module operates as a rack-mounted expansion node, synchronizing with the PLC CPU through internal communication channels. It does not require separate programming and inherits configuration directly from the master controller. This architecture allows scalable system design while maintaining consistent scan performance across distributed I/O points. Electrical Characteristics All input and output circuits are designed for 24 VDC operation, providing compatibility with standard industrial control devices. Internal isolation ensures signal stability between field wiring and system logic. Power is drawn from the main system supply, eliminating the need for external power modules. Typical Applications Machine I/O expansion for compact PLC systems Conveyor and material handling systems Packaging machinery control extensions Auxiliary control panels in OEM equipment Process monitoring systems requiring additional discrete points Frequently Asked Questions Q1: Can this module operate independently without a PLC CPU?No. It must be connected to a VersaMax Micro PLC controller. Q2: How many expansion modules can be added?Up to four expansion units can typically be connected depending on system configuration. Q3: Are the inputs and outputs isolated?Yes. Signal isolation is implemented to improve noise immunity and system reliability. Q4: Does it require separate programming?No. It is automatically managed by the host PLC configuration.
$200.00 $100.00
-
General Electric GE Fanuc IC200ACC414 VersaMax PLC Backup Battery Module
Product Overview The IC200ACC414 is a dedicated long-life backup battery designed for GE Fanuc VersaMax Micro PLC platforms. It is used to maintain volatile memory and real-time clock functions during power interruption, ensuring that controller data integrity and system timekeeping remain stable even under extended downtime conditions. This battery is intended for use in Micro PLC configurations where non-volatile memory retention is required for program continuity and accurate time-based control operations. Functional Role The unit supplies backup power to: RAM memory retention circuits Real-time clock (RTC) module inside the PLC CPU It supports uninterrupted data preservation for configuration parameters, logic programs, and time-dependent control sequences when main system power is removed. Technical Specifications Parameter Specification Model IC200ACC414 Product Type Long-life PLC backup battery Nominal Voltage 3.6 V DC Capacity ~790 mAh Battery Chemistry Lithium primary cell Form Factor Cylindrical cell design Supported PLC Sizes 20, 23, 28, 40, 64-point VersaMax Micro PLC CPUs Backup Function RAM retention + real-time clock support Service Life Up to 5 years at 30°C (typical operating conditions) Extended Backup Duration Up to ~7 years depending on system load and environment Mounting Internal PLC battery compartment installation Weight 0.05 lb Design Characteristics The battery is engineered for stable low-current discharge over extended periods. Its lithium-based chemistry ensures consistent voltage output, which is critical for maintaining memory retention circuits in embedded PLC systems. The cylindrical form factor allows direct integration into compatible VersaMax CPU modules without external wiring or adapters. System Compatibility The IC200ACC414 is compatible with multiple VersaMax Micro PLC CPU configurations, including compact and mid-range point-count controllers. It is designed specifically for GE Fanuc Emerson VersaMax architectures and is not intended for general-purpose industrial batteries. Operational Considerations Battery replacement should be performed while the PLC is powered or following manufacturer maintenance procedures to prevent data loss. The service life is influenced by ambient temperature, PLC power cycling frequency, and memory retention load. Typical Applications PLC program memory retention systems Real-time clock backup for process sequencing Small machine control systems requiring non-volatile logic storage OEM equipment with intermittent power supply conditions Distributed control units requiring persistent configuration storage Frequently Asked Questions Q1: Does the battery affect PLC operation during normal running?No. It only activates during power loss to preserve memory and clock functions. Q2: Can this battery be recharged?No. It is a non-rechargeable lithium primary cell designed for long-term standby use. Q3: What happens when the battery is depleted?RAM and time data may be lost during power interruption, requiring reconfiguration. Q4: Is it compatible with non-VersaMax PLC systems?No. It is designed specifically for VersaMax Micro PLC platforms.
$200.00 $100.00
-
General Electric GE Fanuc IC200MDL331 VersaMax 120VAC Output Module
Product Overview The IC200MDL331 is an 8-channel AC discrete output module designed for the VersaMax I/O system developed by GE Fanuc (now Emerson Automation). It is intended for direct switching of 120 VAC field loads, providing electrically isolated outputs for each channel to improve system stability and fault separation in distributed control environments. This module is typically used in applications where reliable AC load switching is required without external relay interfacing, reducing panel complexity and maintenance requirements. Functional Description Each output channel operates as an independently isolated switching point using solid-state output technology. The module supports direct control of AC actuators, solenoids, pilot devices, and indicator loads operating at standard industrial control voltages. Built-in protection circuits such as snubber networks and MOV suppression help reduce switching stress and improve operational lifespan under inductive load conditions. Technical Specifications Parameter Specification Model IC200MDL331 Output Type AC discrete output module Number of Outputs 8 isolated channels Rated Output Voltage 120 VAC nominal Operating Voltage Range 85–132 VAC Frequency Range 47–63 Hz Output Current 2.0 A per point (max) Minimum Load Current 0.5 A Inrush Current Up to 20 A Switching Response Approx. 1/2 cycle Isolation Rating 250 VAC continuous, 1500 VAC for 1 minute Backplane Current Draw Approx. 85 mA Leakage Current < 2 mA at 132 VAC Protection Circuitry MOV + snubber per channel Indicator Status 8 channel LED + module OK LED Mounting VersaMax rack-based installation Electrical Design Characteristics The module uses individual channel isolation to prevent cross-channel interference and improve fault containment. Each output stage includes surge suppression components to manage inductive kickback and switching transients commonly found in AC load environments. System Integration The IC200MDL331 connects directly to VersaMax backplane systems and communicates via internal I/O bus architecture. No external configuration is required beyond standard PLC addressing in the control program. It is compatible with GE VersaMax CPU and expansion racks, supporting modular system scalability. Typical Applications Motor starter coil control Solenoid valve switching Industrial lighting control circuits Conveyor system actuator control Packaging machine output sequencing HVAC equipment control panels Frequently Asked Questions Q1: Is this module suitable for DC loads?No. The IC200MDL331 is designed specifically for AC voltage switching and is not intended for DC output applications. Q2: Does each output have electrical isolation?Yes. Each of the 8 channels is individually isolated to improve reliability and reduce fault propagation. Q3: Can it directly drive inductive loads?Yes, within rated limits. Built-in snubber and MOV protection support inductive load switching. Q4: What replaces mechanical relays in this module?It uses solid-state switching elements, eliminating the need for external relay hardware in most AC control applications.
$200.00 $100.00
-
General Electric GE Fanuc IC200ACC415 VersaMax RS-232 RS-485 Converter Module
Product Overview The IC200ACC415 from GE Fanuc is a dedicated communication interface module designed to bridge RS-232 serial devices with RS-485 multidrop networks. It is commonly used in VersaMax Nano and Micro PLC installations where extended communication distance and multi-device networking are required. This converter enables stable signal translation between point-to-point RS-232 links and differential RS-485 bus structures, improving system flexibility in distributed control environments. Functional Description The module performs protocol-level electrical conversion without requiring configuration software. It supports transparent data transmission, allowing PLCs and field devices to communicate over extended cable distances while maintaining signal integrity in electrically noisy environments. RS-485 output supports multi-drop topology, enabling multiple devices to share a single communication line. Technical Specifications Parameter Specification Model IC200ACC415 Function RS-232 to RS-485 signal conversion Supported Systems VersaMax Nano and Micro PLC platforms Communication Type Asynchronous serial data transfer Network Type RS-485 multi-drop bus support Indicator LED status for TX/RX activity Cable Requirement IC200CBL500 or equivalent interface cable Power Supply Powered via connected PLC interface Physical Weight 0.05 lb Mounting Inline accessory installation Environmental Rating Industrial-grade rugged design Design Characteristics The converter is built as a compact inline accessory, minimizing installation space within control cabinets. Its reinforced electrical design ensures stable operation under industrial noise conditions, including motor drives and switching power systems. System Integration The unit is fully compatible with VersaMax Nano and Micro PLC systems. It requires no additional configuration and operates transparently within existing serial communication structures. Installation is completed through direct connection using supported communication cables. Typical Applications This module is typically deployed in: Multi-PLC communication networks Distributed I/O architectures Conveyor and material handling systems Packaging line synchronization networks Process monitoring systems requiring long-distance serial communication Frequently Asked Questions Q1: Does the module require external configuration?No. It operates as a plug-and-play hardware converter without software setup. Q2: Can it support multiple devices on one RS-485 line?Yes. It enables RS-485 multi-drop communication for multiple nodes. Q3: Is it compatible with all VersaMax PLCs?It is designed for VersaMax Nano and Micro series systems. Q4: What cable is required for installation?The IC200CBL500 cable or equivalent is recommended for proper connection.
$200.00 $100.00
-
ABB ABB NTDI01 Digital I/O Termination Unit Industrial Module
Product Overview The NTDI01 is a digital signal termination module manufactured by ABB, designed to interface field I/O wiring with compatible control system modules. It serves as a structured termination point for multiple ABB I/O and control submodules, improving wiring organization, signal routing, and system maintainability. This unit is typically installed as part of ABB distributed control or automation architectures where multiple functional modules require centralized field termination. Functional Role The termination unit provides a standardized interface for connecting various ABB system modules, including but not limited to:DSI, DSO, DSM, SET, SED, ASO, HSS, FCS, NKTU, NKST, and NKSD series components. It simplifies field wiring by consolidating signal entry and exit points into a single structured assembly, reducing installation complexity and potential wiring errors. Technical Specifications Parameter Specification Model NTDI01 Product Type Digital I/O Termination Unit Manufacturer ABB Net Weight 0.4 kg Dimensions (L × W × H) 78.74 × 213.36 × 233.68 mm Material Function Signal termination and interface distribution System Compatibility ABB DSI, DSO, DSM, SET, SED, ASO, HSS, FCS, NKTU, NKST, NKSD Mounting Method Panel or rack integration Electrical Role Passive signal termination interface Design Characteristics The module is designed as a passive interface unit without active processing electronics. It functions purely as a structured termination layer between field wiring and system-level I/O modules. The mechanical layout supports organized cable routing and reduces strain on terminal connections, improving long-term system reliability. System Integration The NTDI01 is integrated into ABB control architectures as a supporting interface layer. It does not perform signal processing but ensures correct physical and electrical distribution of I/O signals to connected modules. Its standardized connector layout allows consistent installation across different ABB system configurations. Typical Applications Distributed control system I/O wiring consolidation Process automation field termination panels Modular ABB control cabinet assemblies Signal routing in multi-module I/O architectures Industrial instrumentation interface panels Frequently Asked Questions Q1: Does the NTDI01 process signals?No. It is a passive termination unit used only for wiring and interface organization. Q2: Is it compatible with non-ABB systems?It is designed specifically for ABB module ecosystems and is not intended for general-purpose use. Q3: Does it require configuration or programming?No configuration is required. It functions as a physical interface component. Q4: What is the main advantage of using this unit?It simplifies wiring structure and improves maintainability in multi-module ABB I/O systems.
$200.00 $100.00
-
General Electric GE Fanuc IC200UDD220 VersaMax Micro PLUS PLC Controller
Product Overview The GE Fanuc IC200UDD220 is a compact programmable logic controller from the VersaMax Micro PLUS platform, engineered for machine-level automation where integration density and space efficiency are required. It combines processing, discrete I/O handling, and 24 VDC power conditioning in a single housing to reduce panel complexity and external wiring requirements. This controller is typically used in OEM equipment and small automation systems that require reliable discrete control with predictable scan performance. Technical Specifications Parameter Specification Model IC200UDD220 Total I/O Points 20 Digital Inputs 12 × 24 VDC input channels Digital Outputs 8 × 24 VDC transistor sink outputs Output Type DC transistor switching Power Supply 24 VDC nominal input CPU Integrated VersaMax Micro PLUS processor Communication 1 × RS-232 serial port Expansion Capability Optional communication and memory expansion modules Programming Software GE Machine Edition V5.7 or later Memory Support Optional retentive memory via IC200ACC414 battery module Mounting DIN rail or panel installation Operating Temperature Industrial standard 0–60°C System Architecture The IC200UDD220 is designed as a fully integrated control unit combining CPU, I/O, and power management in one module. This reduces the need for separate PLC racks and simplifies system design for compact machine applications. Performance Characteristics The controller is optimized for discrete automation tasks requiring fast response and stable execution. Key characteristics include deterministic scan cycles, high-speed input sampling for sensor signals, and transistor-based outputs suitable for rapid switching of actuators and solenoids. Compared with standard Micro PLC models, the PLUS version provides improved processing efficiency and expanded memory capacity. Communication and Programming Configuration and programming are performed through GE Machine Edition software. The serial communication interface supports system setup, diagnostics, and program download. Optional modules allow extended communication capabilities depending on system architecture requirements. Typical Applications This PLC is commonly used in packaging machinery, conveyor systems, small assembly automation lines, OEM equipment control panels, and compact process control applications where space constraints and integration simplicity are important. Frequently Asked Questions Q1: Does this PLC require external I/O expansion?No. It includes 20 built-in digital I/O points. Q2: Is a battery required for operation?The unit operates without a battery. However, IC200ACC414 is used for memory retention during power loss. Q3: What software is needed for programming?GE Machine Edition version 5.7 or higher is required. Q4: What is the advantage of the PLUS version?It provides enhanced processing speed and larger memory capacity compared to earlier Micro PLC variants.
$200.00 $100.00
-
General Electric GE Fanuc IC200UDD164 VersaMax Micro PLC Controller
Product Overview The IC200UDD164 is a compact integrated controller from the GE Fanuc Emerson VersaMax Micro platform, combining processing logic and onboard I/O in a single hardware unit. It is designed for applications requiring dense signal handling and fast deterministic control in space-constrained automation systems. With a built-in CPU and fixed I/O architecture, this unit reduces the need for separate rack-based components while maintaining reliable real-time control performance. Technical Specifications Model: IC200UDD164 Manufacturer: GE Fanuc / Emerson Series: VersaMax Micro Product Type: Compact Micro PLC Controller Processor: 32-bit CPU for fast logic execution and control processing Total I/O Capacity: 64 points Digital Inputs: 40 × 24 V DC Digital Outputs: 24 × DC transistor outputs (sinking/sourcing depending on configuration) Input Voltage Range: 24 V DC nominal Output Type: High-speed transistor outputs suitable for rapid switching applications Power Supply Requirement: 24 V DC system supply Mounting Method: DIN rail or panel mounting compatible Communication & Expansion: Designed for VersaMax Micro system integration (limited fixed I/O architecture) Operating Temperature Range: -40°C to +60°C (typical industrial rating) Physical Dimensions: 150 × 90 × 76 mm Weight: 1.23 lb Functional Characteristics The IC200UDD164 integrates controller logic and I/O hardware into a unified structure, reducing wiring complexity and cabinet space requirements. The onboard 32-bit processor enables efficient execution of control routines, while the built-in I/O supports direct field device interfacing. The transistor-based outputs are optimized for fast switching cycles, making the unit suitable for time-sensitive automation tasks. Application Areas Compact machine automation systems Packaging and assembly line control Material handling and conveyor systems OEM equipment requiring integrated PLC functionality Small-to-medium distributed control applications Engineering Notes This controller features a fixed I/O configuration; system expansion requires additional compatible modules if higher I/O capacity is needed. Transistor outputs are best suited for low to medium current loads, and external relays should be used for higher power switching applications. Proper 24 V DC power stability is essential to ensure consistent CPU and I/O performance. FAQ Q1: Is the IC200UDD164 an all-in-one PLC?Yes, it integrates both CPU and fixed I/O within a single compact controller. Q2: Can the I/O count be expanded?The built-in I/O is fixed; expansion requires additional VersaMax modules. Q3: What type of outputs are used?It uses DC transistor outputs designed for fast switching applications.
$200.00 $100.00
-
General Electric GE Fanuc IC200MDL744 VersaMax 32 Point Output Module
Product Overview The IC200MDL744 is a high-density discrete output module from the GE Fanuc Emerson VersaMax series, designed for digital signal switching in compact I/O systems. It supports multiple output voltage configurations, making it suitable for both TTL-level control and standard DC load driving applications. The module is organized into two output groups and provides per-point status indication for fast diagnostics and maintenance efficiency in distributed control environments. Technical Specifications Model: IC200MDL744 Manufacturer: GE Fanuc / Emerson Series: VersaMax Product Type: Discrete Output Module Number of Output Points: 32 channels Output Configuration: Negative logic (sinking type) Output Groups: 2 isolated groups Electrical Ratings TTL Mode Output Voltage: 4.75–5.25 V DC (5 V nominal) DC Load Mode Output Voltage: 10.2–30 V DC (12/24 V nominal operation) Current Capacity: Up to 0.5 A per point (application dependent) Isolation & Protection Group-to-Group Isolation: 250 V AC continuous 1500 V AC for 1 minute Point-to-Point Isolation: Not provided Protection: No internal fuse (external protection recommended) Power & Diagnostics Backplane Power Consumption: ~140 mA at 5 V DC Module ID: 80808080 Indicators: One LED per output channel Status LEDs: OK and Field Power (FLD PWR) Weight: 0.98 lb Functional Characteristics The IC200MDL744 provides flexible output switching for both low-voltage logic control and standard DC actuator driving. Its dual-voltage capability allows integration into mixed-signal systems without requiring additional interface modules. Per-channel LED indicators simplify troubleshooting by providing immediate visual confirmation of output activity. Application Areas Machine automation control outputs Relay and actuator switching systems Mixed-voltage control panels Compact VersaMax distributed output architectures OEM equipment requiring high-density digital output control Engineering Notes This module operates as a sinking-type (negative logic) output device and requires proper external load design to ensure safe switching performance. Since no internal fusing is included, external protective devices are recommended for inductive or high-current loads. Proper grouping of loads per output bank is essential to maintain isolation integrity. FAQ Q1: What type of outputs does the IC200MDL744 provide?It provides 32 sinking (negative logic) discrete outputs. Q2: Can it operate at both 5V and 24V systems?Yes, it supports TTL-level 5V operation as well as 12/24V DC load switching. Q3: Is internal protection included?No internal fuse is provided; external protection is recommended.
$200.00 $100.00
You have seen 1008 out of 4916 products