Explore a full range of industrial automation products from major brands like ABB, Bently, Honeywell, GE, and more. IndustriaX Limited helps manufacturers source rare and hard-to-find components worldwide with fast delivery to minimize downtime.
All Products
-
General Electric GE Fanuc IC200UAL006 VersaMax Micro PLC Controller
Product Overview The IC200UAL006 is a compact micro PLC controller from the GE Fanuc Emerson VersaMax family, designed for small to mid-scale automation applications requiring integrated control, analog handling, and flexible I/O configuration. It combines discrete, relay, and analog signal processing capabilities within a single unit, making it suitable for standalone machine control or as a compact node in distributed automation systems. Technical Specifications Model: IC200UAL006 Manufacturer: GE Fanuc / Emerson Series: VersaMax Micro Product Type: Micro Programmable Logic Controller Power Supply Voltage: 120–240 V AC Total I/O Capacity: 23 points Discrete Inputs: 13 channels (24 V DC) Discrete Outputs: 10 outputs (mixed relay/transistor configuration depending on output grouping) Analog Inputs: 2 channels Analog Outputs: 1 channel Serial Communication Ports: 2 built-in ports Port 1: RJ-45 (RS-232 interface) Port 2: DB-15 (RS-485 interface) Sensor Power Output: 24 V DC, up to 200 mA available Maximum Relay Load: 2 A at 240 V AC or 24 V DC resistive Memory Expansion: External portable memory modules not supported Power Architecture: Internal isolated supply design for logic and field I/O separation Weight: 1.54 lb Functional Characteristics The IC200UAL006 integrates PLC logic control, analog processing, and communication interfaces into a single compact controller. It is designed for applications where space efficiency and multi-signal handling are required without external expansion modules. Built-in serial ports enable flexible communication with HMI panels, drives, or supervisory systems. Application Areas Standalone machine automation systems Compact production line control Equipment requiring mixed analog and discrete control OEM machinery with integrated control requirements Small distributed control nodes in larger systems Engineering Notes This controller requires stable AC input within the specified voltage range to ensure proper operation. Care should be taken when wiring relay outputs to avoid exceeding contact load limits, especially in inductive load applications. The integrated analog channels allow direct connection to standard industrial sensors without additional signal conditioning modules. FAQ Q1: Does the IC200UAL006 support both analog and digital I/O?Yes, it includes 13 digital inputs, 10 outputs, 2 analog inputs, and 1 analog output. Q2: What communication interfaces are available?It provides two serial ports supporting RS-232 and RS-485 communication standards. Q3: Can memory modules be expanded externally?No, this model does not support portable memory expansion.
$200.00 $100.00
-
General Electric GE Fanuc IC200ALG261 VersaMax Analog Input Module
Product Overview The IC200ALG261 is a high-resolution analog input module from the GE Fanuc Emerson VersaMax platform, designed for precision measurement of differential voltage signals. It provides stable analog signal acquisition for process variables in distributed control and data acquisition systems. With eight differential input channels and 16-bit conversion capability, the module is suited for applications requiring accurate low-level voltage monitoring and reliable noise rejection. Technical Specifications Model: IC200ALG261 Manufacturer: GE Fanuc / Emerson Series: VersaMax Product Type: Analog Input Module Input Channels: 8 differential voltage inputs Input Signal Range: -10 V to +10 V DC (differential and common mode supported) Conversion Resolution: 16-bit digital output Input Resolution: Approximately 0.3125 mV per count Update Time: ~7.5 ms per scan cycle Backplane Power Requirement: 5 V DC supply Current Consumption: ~200 mA at 5 V DC Isolation Rating: 1500 VAC for 1 minute (channel-to-system isolation) Minimum Input Impedance: ≥100 Ω Signal Wiring: Shielded twisted-pair cable recommended Status Indicators: Single green “OK” LED for module health monitoring Weight: 0.22 lb Functional Characteristics The IC200ALG261 is engineered for high-accuracy analog signal conversion in electrically noisy environments. Its differential input structure enhances common-mode noise rejection, improving measurement stability across long cable runs. The 16-bit resolution enables fine signal discrimination, making it suitable for process variables requiring high precision monitoring. Application Areas Process instrumentation and monitoring systems Industrial analog signal acquisition Pressure, flow, and temperature sensor interfacing Distributed control systems using VersaMax architecture Precision data acquisition in machine automation Engineering Notes Proper shielding and grounding of analog signal wiring are essential to maintain signal integrity. Differential input configuration is recommended for environments with high electromagnetic interference. This module must be installed on a compatible VersaMax I/O carrier and used within a properly configured PLC system. FAQ Q1: What type of signals does the IC200ALG261 support?It supports differential analog voltage signals in the ±10 V DC range. Q2: What is the resolution of this module?It provides 16-bit conversion accuracy for high-precision measurement. Q3: Is channel isolation included?The module provides system-level isolation rated at 1500 VAC for enhanced protection.
$200.00 $100.00
-
General Electric GE Fanuc IC200BEM103 VersaMax DeviceNet Interface Module
Product Overview The IC200BEM103 is a VersaMax network communication module from GE Fanuc Emerson designed to operate as a DeviceNet interface for distributed control architectures. It enables structured communication between a PLC system and multiple slave devices, supporting both master and slave roles depending on configuration. The module is intended for deterministic data exchange in industrial networks where reliable cyclic communication and multi-node coordination are required. Technical Specifications Model: IC200BEM103 Manufacturer: GE Fanuc / Emerson Series: VersaMax Product Type: Network Interface / DeviceNet Communication Module Protocol: DeviceNet (Master/Slave capability) Supported Nodes: Up to 40 slave devices Maximum Network Nodes: Up to 64 nodes without bridging Data Transmission Rates: 125 / 250 / 500 kbaud selectable Input/Output Data Capacity: Up to 512 bytes total cyclic data exchange Typical Data Size per Connection: 0 to 8 bytes configurable Power Consumption: ~140 mA at backplane supply Operating Temperature Range: 0°C to 60°C Weight: 0.44 lb Functional Characteristics The IC200BEM103 provides a dedicated communication gateway for integrating VersaMax I/O systems into DeviceNet networks. It supports structured data mapping for efficient cyclic communication between controller and field devices. Its configurable baud rates allow adaptation to different network sizes and cable lengths, ensuring stable communication performance across varied installations. Application Areas DeviceNet-based distributed I/O systems Multi-slave industrial communication networks Machine automation requiring networked field devices Conveyor and material handling control systems Retrofit integration of VersaMax systems into existing DeviceNet infrastructure Engineering Notes This module must be installed on a compatible VersaMax I/O carrier such as IC200CHS series. Proper network termination and cable shielding are required to maintain signal integrity at higher baud rates. Device addressing and network configuration should be completed according to DeviceNet protocol standards prior to system commissioning. FAQ Q1: How many devices can the IC200BEM103 support?It supports up to 40 slave devices and up to 64 total network nodes without bridging. Q2: What communication speeds are available?Selectable baud rates include 125 kbaud, 250 kbaud, and 500 kbaud. Q3: Does it support both master and slave modes?Yes, it is designed for DeviceNet master/slave network operation depending on configuration.
$200.00 $100.00
-
General Electric GE Fanuc IC200MDL143 VersaMax 120VAC Input Module
Product Overview The IC200MDL143 is a discrete input module designed for the GE Fanuc Emerson VersaMax I/O platform. It provides reliable detection of AC input signals and is commonly used to interface field devices such as switches, sensors, and relays operating at standard industrial voltage levels. With channel-to-channel isolation and integrated diagnostics, this module ensures stable signal acquisition in electrically demanding environments. Technical Specifications Model: IC200MDL143 Manufacturer: GE Fanuc / Emerson Series: VersaMax Product Type: Discrete Input Module Number of Inputs: 8 isolated digital input channels Input Voltage: 120 V AC nominal Frequency Range: 50/60 Hz Input Type: AC discrete signal detection Channel Isolation: Individual isolation per input channel Backplane Current Consumption: ~50 mA Response Time (ON): 1 PLC scan cycle typical Built-in Power Supply: Internal field-side power support Status Indicators: 8 dedicated LEDs for per-channel status monitoring Installation Location: VersaMax I/O carrier base Dimensions: 110 mm × 66.8 mm × 50 mm Weight: 0.25 lb Functional Characteristics The IC200MDL143 is engineered for accurate AC signal detection with robust isolation between channels, minimizing electrical interference and cross-talk. The integrated LED indicators allow quick visual diagnostics of input states, reducing troubleshooting time during commissioning and maintenance. Its compatibility with VersaMax carriers ensures seamless integration into modular PLC systems. Application Areas Industrial control panels using AC input signals Monitoring of pushbuttons, limit switches, and relay contacts Machine automation systems with 120 VAC field devices Distributed I/O installations within VersaMax architectures Process control systems requiring isolated input channels Engineering Notes This module is intended for installation on a VersaMax I/O carrier and requires proper wiring practices for AC voltage systems. Ensure compliance with electrical safety standards when handling 120 VAC signals. Channel isolation enhances noise immunity, making the module suitable for installations with high electromagnetic interference. FAQ Q1: What type of signals does the IC200MDL143 accept?It is designed for 120 VAC discrete input signals. Q2: Are the input channels isolated?Yes, each of the 8 channels is individually isolated. Q3: How is input status monitored?Each channel has a dedicated LED indicator for real-time status display.
$200.00 $100.00
-
General Electric GE Fanuc IC200UEX122 VersaMax Micro I/O Expansion Unit
Product Overview The IC200UEX122 is a compact digital expansion module from GE Fanuc Emerson, developed for the VersaMax Micro PLC series. It increases system I/O capacity by adding discrete input and output channels, enabling more flexible control system configurations without replacing the base controller. This unit integrates digital inputs and transistor outputs in a single housing, making it suitable for applications that require both signal monitoring and actuator control within limited panel space. Technical Specifications Model: IC200UEX122 Manufacturer: GE Fanuc / Emerson Series: VersaMax Micro Product Type: Digital I/O Expansion Module Total I/O Points: 14 Digital Inputs: 8 channels Digital Outputs: 6 transistor outputs Input Voltage Range: 0 to 30 V DC Nominal Input Voltage: 24 V DC Input Current: ~7.5 mA typical per channel Input Impedance: Approx. 2.8 kΩ Input Thresholds: ON state ≥ 15 V DC OFF state ≤ 5 V DC Response Time: Configurable from ~0.5 ms to 20 ms Isolation Rating: 1500 V RMS (field to logic) 500 V RMS (between channel groups) Output Type: Transistor outputs with electronic short-circuit protection Output Voltage Range: 12–24 V DC (+10% / –15%) Output Current Capacity: Channels Q1–Q2: up to 1 A per point (3.4 A per common) Channels Q3–Q6: up to 0.7 A per point (3.4 A per common) Inrush Current Capability: Q1–Q2: up to 8 A (20 ms) Q3–Q6: up to 4 A (20 ms) Power Supply Requirement: 24 V DC Operating Temperature: -40°C to +60°C Weight: 1.19 lbs Functional Characteristics The IC200UEX122 combines input sensing and output driving capabilities within a single expansion unit, reducing the need for separate modules. Its transistor outputs support fast switching and are suitable for driving relays, solenoids, and other DC loads. The module incorporates electrical isolation to protect the control system from field-side disturbances and improve overall system robustness. Application Areas Compact machine automation systems Packaging and assembly equipment Conveyor and material handling controls OEM equipment requiring scalable I/O expansion Distributed control panels using VersaMax Micro PLCs Engineering Notes This module must be connected to a compatible VersaMax Micro base controller and cannot function independently. When designing the system, ensure proper load distribution across output groups to avoid exceeding common current limits. Adequate power supply sizing is critical, especially when driving inductive loads with high inrush current. FAQ Q1: What type of outputs does the IC200UEX122 provide?It features transistor outputs suitable for DC load switching. Q2: How many inputs and outputs are available?The module provides 8 digital inputs and 6 digital outputs. Q3: Is electrical isolation included?Yes, it offers isolation between field and logic circuits as well as between channel groups.
$200.00 $100.00
-
General Electric GE Fanuc IC200CHS005 I/O Carrier Module
Product Overview The IC200CHS005 is a VersaMax I/O carrier developed by GE Fanuc Emerson, featuring integrated spring-clamp terminals for efficient field wiring. It serves as the mounting and electrical interface for I/O modules, enabling streamlined installation and reliable signal distribution within control cabinets. This carrier adopts a horizontal mounting design and is optimized for DIN rail installation, supporting compact panel layouts in industrial automation systems. Technical Specifications Model: IC200CHS005 Manufacturer: GE Fanuc / Emerson Series: VersaMax Product Type: Spring-Style I/O Carrier I/O Capacity: Supports up to 32 I/O points Terminal Type: Spring-clamp connection technology Number of Terminals: 36 total terminals Current Rating per Point: 2 A Maximum Voltage per Point: 264 V AC Common/Power Terminals: 4 dedicated connections Terminal Tightening Force: Approx. 0.37 to 0.45 lb-ft equivalent spring pressure Mounting Orientation: Horizontal Installation Method: DIN rail mounting Integration Type: Local integrated carrier for direct module mounting Weight: 0.82 lb Design Characteristics The IC200CHS005 incorporates spring-clamp terminals to ensure consistent electrical contact without the need for periodic re-tightening. This design improves long-term reliability, particularly in environments subject to vibration or thermal cycling. Its integrated carrier structure simplifies module installation by combining mechanical support and wiring interface into a single unit. Application Areas VersaMax PLC I/O system installations Control panel wiring for digital and mixed I/O modules Industrial automation cabinets requiring compact layouts Machine control systems with distributed I/O architecture Retrofit projects replacing screw-terminal carriers Engineering Notes Spring-clamp terminals are suitable for both solid and stranded conductors and reduce installation variability compared to screw-type terminals. Proper wire stripping length and insertion technique are important to ensure optimal contact performance. This carrier is intended for use with compatible VersaMax I/O modules and does not function independently. FAQ Q1: How many I/O points can the IC200CHS005 support?It supports up to 32 I/O points with additional terminals allocated for power and common connections. Q2: What is the advantage of spring-clamp terminals?They provide consistent contact pressure, reducing maintenance and improving reliability over time. Q3: Can this carrier be mounted vertically?It is primarily designed for horizontal DIN rail installation to ensure proper module alignment.
$200.00 $100.00
-
General Electric GE Fanuc IC200ACC200 VersaMax Terminal Carrier Module
Product Overview The IC200ACC200 is a passive accessory module within the GE Fanuc Emerson VersaMax platform, designed to serve as a terminal strip carrier and mechanical mounting base for I/O modules. It provides the structural interface required to secure modules and route field wiring efficiently within a modular PLC system. Unlike active electronic modules, this unit contains no internal circuitry and functions purely as a physical and electrical interconnection platform between field devices and the VersaMax backplane system. Technical Specifications Model: IC200ACC200 Manufacturer: GE Fanuc / Emerson Series: VersaMax Product Type: Terminal Strip Carrier / Base Accessory Module Function: Mechanical support and field wiring interface for I/O modules Compatibility: Designed for VersaMax I/O module installation Electrical Characteristics: Passive component (no internal electronics) Connection Interface: Terminal strip mounting platform for field wiring Mounting Options: DIN rail or panel mounting Material Construction: Industrial-grade polymer housing with integrated conductive elements Operating Temperature Range: -40°C to +60°C Dimensions: 120 mm × 50 mm × 20 mm Weight: 1 lbs Design Characteristics The IC200ACC200 is engineered to simplify panel layout and wiring organization by providing a stable base for terminal strip integration. Its modular design allows for quick installation and replacement of I/O modules without disturbing existing wiring. The absence of active electronics improves reliability in harsh industrial environments and reduces maintenance complexity. Application Areas PLC panel assembly and wiring organization VersaMax distributed I/O system installations Industrial automation cabinets requiring modular wiring structures Retrofit projects where structured terminal interfaces are required OEM machine control panel design Engineering Notes This module is often used in conjunction with terminal strips and I/O modules to create a complete wiring interface. It does not provide power conversion or signal processing and must be combined with active VersaMax components for system operation. FAQ Q1: Does the IC200ACC200 contain any electronics?No, it is a passive module used purely for mounting and wiring purposes. Q2: Can it be used as a standalone device?No, it must be integrated into a VersaMax system with compatible I/O modules. Q3: What is its primary role in a control system?It acts as a structural and electrical interface, organizing field wiring and supporting module installation.
$200.00 $100.00
-
General Electric GE Fanuc IC200UEX014 Discrete I/O Expansion Module
Product Overview The IC200UEX014 is a discrete I/O expansion module developed for the GE Fanuc Emerson VersaMax Micro platform. It extends the base controller’s digital I/O capacity by providing additional input and output channels in a compact, integrated unit. Designed for direct connection to VersaMax Micro PLCs, this expansion module enables efficient scaling of control systems while maintaining consistent 24 VDC signal standards across field devices. Technical Specifications Model: IC200UEX014 Manufacturer: GE Fanuc / Emerson Series: VersaMax Micro Module Type: Discrete I/O Expansion Unit Total I/O Channels: 20 points Digital Inputs: 14 channels (24 V DC) Digital Outputs: 6 channels (24 V DC) Input Voltage: 24 V DC nominal Output Voltage: 24 V DC nominal Supply Voltage: 24 V DC system power Input Power Consumption: Approx. 4 W Sensor Power Supply: 200 mA available at 24 V DC Integration Method: Direct expansion interface to Micro PLC base unit Mounting: Panel or DIN rail installation (depending on system configuration) Weight: 0.79 lbs Functional Characteristics The IC200UEX014 provides a balanced combination of digital inputs and outputs, allowing a single module to handle both signal acquisition and actuator control. This reduces the need for multiple expansion modules and simplifies system wiring. The module is optimized for standard industrial 24 VDC signaling, ensuring compatibility with common sensors, switches, and actuators. Application Areas Machine control systems requiring additional discrete I/O Packaging and assembly automation lines Conveyor and material handling systems PLC-based control panel expansion OEM equipment with scalable I/O requirements Engineering Notes This expansion unit is specifically designed for use with VersaMax Micro PLCs and cannot operate as a standalone device. Proper power budgeting is required to ensure sufficient current is available for connected field devices, especially when utilizing the onboard sensor supply. FAQ Q1: How many I/O points does the IC200UEX014 provide?It supports a total of 20 points, consisting of 14 digital inputs and 6 digital outputs. Q2: What voltage level is required for operation?The module operates on a standard 24 V DC power supply. Q3: Can this module be used independently?No, it must be connected to a compatible VersaMax Micro PLC base unit.
$200.00 $100.00
-
General Electric GE Fanuc IC200ACC403 VersaMax Micro Battery Assembly
Product Overview The IC200ACC403 is a lithium-based backup battery assembly designed for the GE Fanuc Emerson VersaMax Micro PLC platform. It provides essential power retention for volatile memory, ensuring that system configuration, process data, and diagnostic information are preserved during power loss conditions. This coil-cell battery unit is engineered for direct integration into VersaMax Micro controllers and is monitored by the PLC system for battery health and fault indication. Technical Specifications Model: IC200ACC403 Manufacturer: GE Fanuc / Emerson Series: VersaMax Micro Product Type: PLC Memory Backup Battery Assembly Battery Chemistry: Lithium primary cell Nominal Voltage: 3.0 V DC Nominal Capacity: ~210 mAh (some production batches may be labeled up to ~2200 mAh depending on packaging revision) Assembly Type: Coil cell with integrated wire leads Installation Location: Internal battery holder in VersaMax Micro PLC units Data Retention Function: Maintains volatile memory during power-off conditions Battery Monitoring: Status reported via PLC diagnostics (fault table / system status bits %SA011, %SA014) Shelf Life: Up to 5 years at 30°C Approximately 3 years at 55°C Backup Duration (Power-Off): Minimum operational retention ~4 months at elevated temperature conditions (55°C) Connection Type: Pre-attached lead wires for direct terminal connection Weight: 0.45 kg Functional Role The IC200ACC403 is critical for maintaining non-volatile operation continuity in VersaMax Micro PLC systems. It ensures that program logic retention, configuration parameters, and runtime data remain intact when primary power is unavailable. Battery condition is continuously supervised by the controller, allowing predictive maintenance before failure occurs. Application Areas VersaMax Micro PLC memory retention systems Industrial controller backup power support Control system configuration preservation Field-installed PLC maintenance replacement kits Automation systems requiring non-volatile data integrity Engineering Notes This battery assembly should be replaced according to manufacturer lifecycle recommendations or when diagnostic indicators report low voltage conditions. Proper handling is required due to lithium chemistry; replacement should be performed with system power isolation where applicable. FAQ Q1: What happens when the battery is depleted?The PLC may lose stored data, including configuration and runtime memory, upon power loss. Q2: Is the battery monitored by the PLC system?Yes, battery health is tracked through built-in diagnostic status bits and fault reporting. Q3: Can this battery be replaced while the system is running?Replacement procedures depend on system configuration; in most cases, controlled shutdown is recommended.
$200.00 $100.00
-
General Electric GE Fanuc IC200ALG432 Analog Mixed I/O Module
Product Overview The IC200ALG432 is a Versamax analog mixed-signal module developed by GE Fanuc Emerson, combining both analog input and output channels within a single compact I/O unit. It is designed for applications requiring bidirectional analog signal processing in distributed control systems. This module supports voltage-based signals and is optimized for fast cycle updating, making it suitable for control loops requiring moderate-speed analog acquisition and output response. Technical Specifications Model: IC200ALG432 Manufacturer: GE Fanuc / Emerson Series: Versamax Module Type: Mixed Analog Input/Output Module Channel Configuration: 6 total channels (4 analog inputs + 2 analog outputs) Input Signal Range: ±10 V DC Output Signal Range: ±10 V DC Resolution: 12-bit conversion accuracy (0–4095 digital counts) Update Cycle Time: ~0.4 ms Response Time: ≤ 5 ms typical system response Power Consumption: ~160 mA at 5 V backplane supply Accuracy (25°C): ±0.3% full scale Accuracy (60°C): up to ±1.0% full scale Common Mode Voltage: 0 V Backplane Power Requirement: Standard Versamax rack supply Weight: 0.38 lb Functional Characteristics The IC200ALG432 integrates both signal acquisition and signal generation in a single module, reducing rack space requirements and simplifying wiring architecture. The high-speed update capability allows it to handle dynamic analog signals in real-time control environments. Its 12-bit resolution ensures stable signal representation for process monitoring and closed-loop control applications. Application Areas Process control analog signal acquisition Closed-loop PID control systems Flow, pressure, and temperature analog interfacing Machine automation requiring mixed analog I/O Compact Versamax distributed control systems Engineering Notes This module should be installed within a compatible Versamax I/O rack. Shielded cabling is recommended for analog inputs and outputs to minimize noise interference, especially in electrically noisy industrial environments. Proper grounding and signal separation are required to maintain accuracy at elevated temperatures. FAQ Q1: Does the IC200ALG432 support both input and output signals?Yes, it provides 4 analog input channels and 2 analog output channels. Q2: What is the signal range supported?All channels operate within a ±10 V DC voltage range. Q3: Is the module suitable for fast control loops?Yes, with a 0.4 ms update cycle, it is suitable for moderate-speed analog control applications.
$200.00 $100.00
-
General Electric GE Fanuc IC220TBK087 Power Terminal Strip
Product Overview The IC220TBK087 is an 8-position power terminal strip from GE Fanuc designed for structured power distribution and field wiring management in control cabinet environments. It provides a compact and mechanically stable termination point for high-current industrial circuits, ensuring consistent conductivity and secure mechanical retention. This terminal assembly is commonly used in PLC panels and distributed control wiring systems where reliable multi-point power branching is required. Technical Specifications Model: IC220TBK087 Manufacturer: GE Fanuc Product Type: Power Terminal Strip / Wiring Distribution Block Number of Terminals: 8 positions Rated Current (typical): up to 87 A (standard configuration) Maximum Current (high-capacity variants): up to 250 A (application-dependent construction) Voltage Rating: up to 600 V AC/DC (varies by conductor material and insulation system) Connection Method: Spring-clamp terminal technology for tool-efficient wiring Conductor Material: Brass alloy or corrosion-resistant steel (production variant dependent) Operating Temperature Range: -40°C to +85°C (depending on material configuration) Insulation Class: High thermal endurance class (industrial grade) Mounting Style: Panel-mounted terminal block assembly Mechanical Design: Modular strip structure for grouped wiring distribution Compliance: UL recognized, CE compliant, ISO 9001 manufacturing standard Design Characteristics The IC220TBK087 utilizes spring-style clamping technology to maintain stable contact pressure over time, reducing maintenance requirements in vibration-prone environments. Its multi-position layout supports structured cabling and minimizes wiring congestion in control cabinets. The housing and conductive elements are designed for long service life under continuous load conditions and elevated ambient temperatures. Application Areas PLC control cabinet power distribution Industrial control panel wiring systems Field device power branching and grouping Machine control electrical assemblies Retrofit and panel modernization projects Engineering Notes This terminal strip is typically installed on DIN rail or panel mounting systems depending on cabinet configuration. Proper torque-free spring termination reduces installation variability and improves long-term contact reliability compared to screw-type terminals. FAQ Q1: Is the IC220TBK087 still in active production?It is commonly listed as discontinued in some supply chains, though equivalent stock and refurbished units may still be available. Q2: What type of wiring does it support?It is designed for solid and stranded conductors compatible with spring-clamp termination systems. Q3: Can it be used in high-vibration environments?Yes, the spring-clamp mechanism provides stable contact pressure suitable for vibration-prone industrial installations.
$200.00 $100.00
-
General Electric GE Fanuc IC200BEM002 Versamax PROFIBUS-DP Module
Product Overview The IC200BEM002 is a Versamax communication interface module from GE Fanuc Emerson designed for integration into PROFIBUS-DP networks as a slave station. It provides deterministic cyclic data exchange between a PLC system and a PROFIBUS master, supporting scalable distributed I/O architectures. The module supports automatic baud rate synchronization and is engineered for stable operation in industrial network environments with multi-drop fieldbus topology. Technical Specifications Model: IC200BEM002 Manufacturer: GE Fanuc / Emerson Series: Versamax Module Type: PROFIBUS-DP Slave Communication Module Network Protocol: PROFIBUS-DP (DP-V0 slave functionality) Data Transmission Rate: 9.6 kbit/s to 12 Mbit/s Baud Rate Detection: Automatic synchronization Maximum Stations: Up to 32 nodes without repeaters Up to 125 nodes with repeaters I/O Data Capacity: Up to 384 bytes total cyclic data Input/Output Mapping: Approximately 244 bytes configurable I/O data Connector Interface: 9-pin D-sub (RS-485 PROFIBUS standard) Network Topology: Linear bus with termination at both ends Transmission Medium: Shielded twisted-pair cable (STP) Supply Voltage: 5 V DC (backplane powered) Current Consumption: ~460 mA typical Input Impedance: 135–165 Ω (bus interface standard) Mounting Method: DIN rail installation via Versamax base Indicators: Power (PWR) LED and Communication (COM) LED System Integration Notes The IC200BEM002 requires a compatible Versamax base assembly (e.g., IC200CHS series) for correct operation. It functions as a network communication bridge between local I/O racks and a PROFIBUS-DP master controller. Proper bus termination resistors and shield grounding practices are required to maintain signal integrity at higher baud rates. Application Scenarios Distributed control systems using PROFIBUS-DP networks Integration of Versamax I/O into third-party PLC systems Process automation requiring deterministic fieldbus communication Retrofit of legacy Profibus-based industrial networks Remote I/O expansion in machine control systems FAQ Q1: Is the IC200BEM002 a master or slave device?It operates strictly as a PROFIBUS-DP slave module. Q2: What is the maximum supported data rate?It supports up to 12 Mbit/s depending on network configuration and cable quality. Q3: Does it support automatic baud rate detection?Yes, it automatically detects and synchronizes to the PROFIBUS network speed. Q4: What base is required for installation?It must be installed on a compatible Versamax chassis such as IC200CHS series.
$200.00 $100.00
-
General Electric GE Fanuc IC200ERM001 Versamax Expansion Receiver Module
Product Overview The IC200ERM001 expansion receiver module is part of the GE Fanuc Emerson Versamax distributed I/O architecture, designed to extend rack-to-rack communication while maintaining electrical isolation. It functions as a remote expansion interface between main and expansion racks, enabling flexible system layout in medium to large control installations. The module supports long-distance communication between racks and is engineered for stable backplane signaling with built-in isolation to reduce noise and ground loop interference. Technical Specifications Model: IC200ERM001 Brand: GE Fanuc / Emerson Series: Versamax Module Type: Isolated Expansion Receiver Module Function: Remote rack expansion communication interface Backplane Voltage Range: 3.3 V to 5 V DC Expansion Distance: Up to 2460 ft (≈750 m) between racks Interface Ports: 2 × 26-pin female D-sub connectors Indicators: Built-in LED status indicators for diagnostics Switching Control: Rotary configuration switch integrated Power Supply: Backplane-powered (no external PSU required) Mounting: Compatible with Versamax expansion rack system Weight: 0.44 lbs Functional Characteristics Electrical isolation between main and expansion segments Stable high-reliability backplane communication Designed for modular rack scalability Supports distributed I/O system architecture in compact control cabinets LED indicators provide real-time module and link status diagnostics Application Areas Distributed Versamax I/O expansion systems Process control cabinet extension Remote rack installations in large industrial facilities System modernization and modular PLC expansion High-noise environments requiring signal isolation Engineering Notes This module is intended to operate as a receiver-side expansion interface and must be paired with a compatible Versamax expansion transmitter module. Proper termination and cable routing are essential to maintain signal integrity over long distances. FAQ Q1: Does the IC200ERM001 require external power?No. The module is powered directly through the Versamax backplane system. Q2: What is the maximum expansion distance supported?It supports up to approximately 2460 feet (750 meters) between racks under standard installation conditions. Q3: Can it operate independently without a Versamax rack system?No. It is designed specifically for integration within the Versamax expansion rack architecture.
$200.00 $100.00
-
General Electric GE Fanuc IC200GB1001 VersaMax Genius Network Interface Unit
Product Description The IC200GBI001 Genius Network Interface Unit from GE Fanuc Emerson VersaMax series is designed to enable distributed I/O communication over a Genius bus architecture. It operates as a remote slave interface, allowing multiple I/O racks to be managed through a centralized controller for scalable system expansion. This module provides dual Genius communication terminals supporting main and redundant bus configurations, ensuring network reliability in mission-critical applications. It is engineered for integration with GE PLC platforms and supports multiple baud rates for flexible network performance across standard and extended configurations. Key Technical Specifications Parameter Specification Model IC200GBI001 Manufacturer GE Fanuc Emerson Product Series VersaMax Module Type Genius Network Interface Unit (NIU) Communication Ports 2 x Genius Bus Terminals Bus Configuration Main + Redundant (Dual Terminal Support) Supported Baud Rates 38.4 kbps / 76.8 kbps / 153.6 kbps (standard), up to 153.6 kbps extended Maximum Racks Supported Up to 8 Racks Modules per Rack Up to 8 Modules Input Data Capacity 128 bytes per scan Output Data Capacity 128 bytes per scan Discrete I/O Memory 1024 inputs / 1024 outputs Total I/O Capacity Up to 2048 discrete points Analog I/O Memory 128 bytes input / 128 bytes output Network Topology Daisy-chain Serial Address Range 0–31 Termination Resistors 75 / 100 / 120 / 150 Ω selectable Power Requirements 5 VDC backplane supply Power Consumption ~250 mA typical Indicator LEDs PWR, OK, FAULT, I/O ENABLE, FORCE, BUS STATUS Compatible CPUs Series 90-70, PACSystems RX7i, RX3i Isolation Industrial-grade network isolation Mounting VersaMax rack backplane Weight 0.33 lbs Functional Features Enables distributed I/O architecture via Genius bus network Dual-terminal design supports redundant communication paths High-capacity discrete and analog data mapping Flexible baud rate configuration for different network requirements Compatible with multiple GE PLC control platforms Application Scenarios Large-scale distributed I/O systems Process control networks requiring redundancy Multi-rack PLC expansions Industrial automation communication backbones Legacy Genius bus system integration and upgrades FAQ Q: Can the IC200GBI001 operate in redundant network configurations?A: Yes, it supports dual Genius terminals for main and redundant bus operation. Q: How many I/O points can it manage?A: It supports up to 2048 discrete I/O points along with analog data mapping. Q: Is it compatible with modern PACSystems controllers?A: Yes, it is compatible with PACSystems RX7i and RX3i platforms.
$200.00 $100.00
-
General Electric GE Fanuc IC200MDL632 VersaMax 16-Point 125VDC Input Module
Product Description The IC200MDL632 discrete input module from GE Fanuc Emerson VersaMax I/O platform is designed for high-voltage DC signal acquisition in distributed control systems. It provides 16 independently isolated input channels capable of accepting both positive and negative logic signals, making it suitable for demanding industrial monitoring applications. This module is engineered for 125 VDC nominal field signals and supports a wide input voltage range, ensuring stable operation in environments where long cable runs or high-noise conditions are present. Its optically isolated architecture enhances signal integrity while protecting backplane electronics from field disturbances. Key Technical Specifications Parameter Specification Model IC200MDL632 Manufacturer GE Fanuc Emerson Product Series VersaMax I/O Module Type Discrete Input Module Number of Inputs 16 Channels Input Type Positive / Negative Logic Compatible Nominal Input Voltage 125 VDC Input Voltage Range 0–150 VDC Input Current ~1.7 mA at 125 VDC / ~2.2 mA at 150 VDC Input Impedance ~74 kΩ (typical at 125 VDC) Response Time ≤0.5 ms (max) Filter Options 0 ms / 1 ms / 7 ms selectable Isolation 250 VAC continuous, 1500 VAC for 1 minute Channel Isolation Individually isolated inputs Backplane Current 80 mA max Power Requirement No external field power required Mounting DIN Rail / VersaMax rack slot Operating Temperature 0°C to 55°C Weight 0.3 lbs Functional Features 16-channel high-voltage DC input acquisition Supports both sinking and sourcing logic configurations High-speed response suitable for fast digital signal detection Optically isolated input structure for noise immunity Configurable input filtering for signal conditioning flexibility Application Scenarios High-voltage DC signal monitoring systems Industrial machinery status feedback Power distribution and control panels Safety and interlock signal acquisition Remote I/O monitoring in harsh environments FAQ Q: Does the IC200MDL632 require external field power?A: No, the module does not require an external field power supply for input operation. Q: Can it handle both positive and negative logic signals?A: Yes, it supports both logic types for flexible wiring configurations. Q: Is each input electrically isolated?A: Yes, all channels are individually isolated to improve system reliability and reduce noise interference.
$200.00 $100.00
-
General Electric GE Fanuc IC200MDL930 VersaMax 8-Channel Relay Output Module
Product Description The IC200MDL930 relay output module from GE Fanuc Emerson VersaMax I/O family is designed for flexible switching of AC and DC loads in distributed control systems. It provides eight independently isolated Form A relay outputs, supporting a wide range of industrial voltage levels for mixed-load applications. Each output channel is built with electromechanical relay contacts, enabling direct interface with field devices such as solenoids, contactors, and indicator loads. The module is engineered for electrical robustness, offering reinforced isolation between channels and logic circuitry to improve system reliability in noisy environments. Key Technical Specifications Parameter Specification Model IC200MDL930 Manufacturer GE Fanuc Emerson Product Series VersaMax I/O Module Type Relay Output Module Number of Outputs 8 Channels Output Type Electromechanical Relay Contact Form Form A (Normally Open) Rated Load Voltage 5–125 VDC / 120–240 VAC Operating Voltage Range 0–125 VDC / 0–265 VAC (47–63 Hz) Max Load Current 2.0 A (resistive load) Minimum Load 10 mA per point Switching Frequency Up to 20 cycles/min Response Time ≤10 ms ON/OFF Relay Construction Fixed coil, moving armature Contact Material Silver alloy Backplane Current Approx. 243 mA Current Consumption Up to 435 mA max Isolation 250 VAC continuous, 1500 VAC for 1 min Channel Isolation Individually isolated outputs Temperature Range 0°C to 30°C (operating) Mounting DIN Rail / VersaMax Rack Weight 0.53 lbs Functional Features 8 independently isolated relay outputs for flexible load control Supports AC and DC switching within a wide voltage range High dielectric isolation for improved system protection Fast switching response suitable for discrete control tasks Silver alloy contacts for improved durability and conductivity Application Scenarios Industrial machine control panels Motor starter and contactor switching Lighting and alarm output control Packaging and assembly automation systems General-purpose relay interfacing in PLC systems FAQ Q: Can the IC200MDL930 switch both AC and DC loads?A: Yes, it supports switching of AC and DC loads within the specified voltage and current limits. Q: Are the outputs individually isolated?A: Yes, each relay channel is electrically isolated to improve fault tolerance and system safety. Q: Is this module suitable for inductive loads?A: Yes, but external suppression devices are recommended for heavy inductive loads to extend relay life.
$200.00 $100.00
-
General Electric GE Fanuc IC200UAL005 VersaMax Micro 23-Point PLC Controller
Product Description The IC200UAL005 from GE Fanuc Emerson VersaMax Micro series is a compact multi-function PLC designed for hybrid control applications requiring both discrete and analog processing. It integrates control logic, I/O handling, and power management into a single microcontroller platform, reducing system complexity in small automation architectures. This Micro 23-point controller combines digital, relay, and analog capabilities within one unit, supporting mixed-signal automation tasks such as machine sequencing, process monitoring, and signal conditioning. Its integrated design allows direct field wiring without external I/O modules, making it suitable for space-constrained control panels. Key Technical Specifications Parameter Specification Model IC200UAL005 Manufacturer GE Fanuc Emerson Product Series VersaMax Micro Device Type Micro PLC Controller Total I/O Capacity 23 Points Digital Inputs 13 x 24 VDC Analog Inputs 2 Channels Relay Outputs 9 Channels Analog Outputs 1 Channel Additional DC Output 1 Channel Input Voltage Range 24 VDC nominal Power Consumption Approx. 8 W Input Current (typical) ~0.3 A at 24 VDC Inrush Current 1 A max at 30 VDC Inrush Duration 10 ms Mounting DIN Rail Operating Temperature 0°C to 55°C Weight 0.91 kg Functional Features Integrated hybrid PLC with digital, relay, and analog I/O Supports mixed-signal control without external expansion modules Relay outputs suitable for AC/DC load switching Analog channels for process feedback and control loops Compact architecture optimized for small machine control Application Scenarios Compact OEM machinery control systems Basic process control with analog feedback Packaging and small production equipment HVAC and environmental regulation systems Multi-function standalone automation panels FAQ Q: Does the IC200UAL005 support both analog input and output control?A: Yes, it includes 2 analog input channels and 1 analog output channel for basic process control applications. Q: Can relay outputs handle AC loads?A: Yes, the relay outputs are designed for switching AC or DC loads within rated specifications. Q: Is this PLC expandable with additional modules?A: The Micro series has limited expansion capability compared to modular VersaMax systems; it is intended for compact standalone use.
$200.00 $100.00
-
General Electric GE Fanuc IC200ALG266 VersaMax 15-Channel Analog Input Module
Product Description The IC200ALG266 analog input module from GE Fanuc Emerson VersaMax I/O platform is designed for high-resolution voltage signal acquisition in distributed control systems. It provides 15 single-ended input channels capable of processing bipolar voltage signals, making it suitable for precision measurement and process monitoring applications. This module supports direct connection to field devices delivering analog voltage signals, with fast conversion performance and stable backplane communication. Its compact single-slot design allows easy integration into VersaMax racks while maintaining high channel density. Key Technical Specifications Parameter Specification Model IC200ALG266 Manufacturer GE Fanuc Emerson Product Series VersaMax I/O Module Type Analog Voltage Input Module Number of Channels 15 Single-Ended Inputs Input Signal Range -10 VDC to +10 VDC Current Input Support 4–20 mA / 0–20 mA (configured via system) Resolution 15-bit (0.3125 mV per count) Conversion Accuracy ±0.3% typical, ±1% max Update Rate Up to 7.5 ms Input Impedance Approx. 100 kΩ Filtering ~32 Hz (−3 dB, ±20%) Isolation 250 VAC continuous, 1500 VAC for 1 minute Backplane Power 5 VDC Current Consumption 100–150 mA max Diagnostics Module status (OK LED) Channel Grouping Single group Mounting DIN Rail / VersaMax rack slot Operating Temperature 0°C to 55°C Weight 0.23 lbs Functional Features 15-channel high-density analog voltage acquisition 15-bit resolution for precise signal measurement Fast 7.5 ms update cycle for real-time monitoring Electrical isolation for improved noise immunity Compact single-slot VersaMax module design Application Scenarios Process variable monitoring (pressure, flow, level transmitters) Analog signal acquisition in OEM machinery Energy and utility measurement systems Test and measurement automation setups HVAC and environmental control systems FAQ Q: Can the IC200ALG266 accept current signals directly?A: It supports 4–20 mA and 0–20 mA signals depending on system configuration and wiring setup. Q: What is the resolution of this module?A: The module provides 15-bit resolution, equivalent to approximately 0.3125 mV per count. Q: Is this module suitable for high-noise environments?A: Yes, it includes electrical isolation up to 1500 VAC and built-in filtering for signal stability.
$200.00 $100.00
-
General Electric GE Fanuc IC200MDL742 VersaMax 16-Point DC Output Module
Product Description The IC200MDL742 discrete output module from GE Fanuc Emerson VersaMax series is designed for reliable switching of DC loads in compact PLC systems. It provides 16 positive logic output channels arranged in two isolated groups, enabling structured load distribution and improved wiring flexibility. This module operates on a 24 VDC nominal field supply and is engineered for applications requiring stable transistor-style switching with built-in protection features. Each output channel supports individual status indication, allowing fast diagnostics during commissioning and maintenance. Key Technical Specifications Parameter Specification Model IC200MDL742 Manufacturer GE Fanuc Emerson Product Series VersaMax Module Type Discrete Output Module Number of Outputs 16 Points Output Groups 2 Groups (16 + 16 grouping architecture depending on configuration) Output Type 24 VDC Positive Logic Output Voltage Range 18–30 VDC (24 VDC nominal) Load Current Up to 0.5 A per point (resistive) Inrush Capability Up to 2.0 A for 100 ms Backplane Current 150 mA at 5 VDC Isolation 250 VAC group-to-group, 1500 VAC for 1 minute Protection Short-circuit, overcurrent, free-wheeling diode suppression Response Time Approx. 0.5 ms ON / 0.5 ms OFF Indicators Per-point LED + OK + Field Power status LEDs Mounting DIN Rail Operating Temperature 0°C to 55°C (typical) Weight 0.33 lbs Functional Features 16-channel DC positive logic output switching Group-isolated architecture for improved fault containment Integrated surge suppression and short-circuit protection Fast switching response suitable for sequencing applications Per-channel LED diagnostics for quick troubleshooting Application Scenarios Solenoid and actuator control Packaging and material handling systems Relay replacement in compact control panels Conveyor and motor control interfaces OEM machine output control logic FAQ Q: Is the IC200MDL742 suitable for inductive loads?A: Yes, each output includes free-wheeling diodes and protection circuitry designed to handle inductive switching conditions. Q: How are outputs grouped in this module?A: The outputs are divided into two electrically isolated groups to improve system safety and fault isolation. Q: Can this module be used with AC loads?A: No, it is designed specifically for 24 VDC positive logic output applications.
$200.00 $100.00
-
General Electric GE Fanuc IC200UDD020 VersaMax Micro 20-Point PLC Controller
Product Description The IC200UDD020 compact PLC from GE Fanuc Emerson VersaMax Micro series is designed for small-scale automation systems requiring reliable control and integrated I/O. This unit combines a controller, power supply, and discrete I/O into a single enclosure, simplifying system architecture and reducing panel space. Equipped with 20 onboard I/O points, the IC200UDD020 includes 12 digital inputs and 8 transistor-based DC outputs. It supports flexible input logic configurations and provides high-speed counter functionality, making it suitable for applications involving pulse signals, position tracking, and fast event processing. Key Technical Specifications Parameter Specification Model IC200UDD020 Manufacturer GE Fanuc Emerson Product Series VersaMax Micro Controller Type Micro PLC Total I/O Points 20 Digital Inputs 12 x 24 VDC Input Type Sink/Source (Positive & Negative Logic) Digital Outputs 8 x 24 VDC Transistor Outputs Output Type DC Sourcing (Solid-State) Supply Voltage 24 VDC (19.2–30 VDC range) Power Consumption Approx. 5 W Typical Input Current 0.2 A at 24 VDC High-Speed Counters Multiple configurations (Type A / Type B / 32-bit modes) Hold-Up Time ≥10 ms at 19.2 VDC Inrush Current 1 A max at 30 VDC Mounting DIN Rail Operating Temperature 0°C to 55°C (industrial standard) Weight 0.9 kg Functional Features Integrated CPU, power supply, and I/O in one compact unit Transistor outputs suitable for high-speed switching applications Flexible input wiring (sinking or sourcing devices supported) Built-in high-speed counters for pulse and frequency measurement Compact and cost-effective solution for small automation systems Application Scenarios Packaging and labeling machinery Conveyor and material handling systems Small OEM equipment and skids Motor control and sequencing tasks Pulse-based applications such as encoders and counters FAQ Q: What type of outputs does the IC200UDD020 provide?A: It uses DC transistor (sourcing) outputs, suitable for fast switching and high-frequency control tasks. Q: Can this controller handle high-speed counting applications?A: Yes, it includes configurable high-speed counters supporting multiple operating modes, including 32-bit counting. Q: Is this unit expandable with additional I/O modules?A: Yes, VersaMax Micro controllers can typically support expansion modules, depending on system configuration.
$200.00 $100.00
-
General Electric GE Fanuc IC200UEI016 VersaMax Micro 16-Point Input Module
Product Description The IC200UEI016 from GE Fanuc Emerson VersaMax Micro platform is a dedicated digital input expansion module engineered to increase the input capacity of compact PLC systems. It provides 16 discrete 24 VDC input channels, enabling reliable signal acquisition from field devices such as sensors, switches, and contact inputs. Designed for seamless integration with VersaMax Micro controllers, the IC200UEI016 offers stable performance, low power consumption, and flexible wiring options. Its compact DIN rail form factor makes it suitable for control panels where space efficiency and scalability are critical. Key Technical Specifications Parameter Specification Model IC200UEI016 Manufacturer GE Fanuc Emerson Product Series VersaMax Micro Module Type Digital Input Expansion Module Number of Inputs 16 Points Input Voltage 24 VDC Input Type Sink/Source compatible Power Supply Voltage 24 VDC Module Power Consumption Approx. 4 W Sensor Power Output 24 VDC, up to 200 mA Expansion Capacity Up to 4 modules per Micro PLC Mounting DIN Rail Operating Temperature 0°C to 55°C (typical industrial range) Weight 1.51 lbs Functional Features 16-point digital input expansion for VersaMax Micro systems Supports both sourcing and sinking input configurations Integrated 24 VDC sensor power supply Low power consumption design for efficient panel operation Compact module suitable for space-constrained installations Application Scenarios Expanding input channels in small automation systems Machine control panels requiring additional sensor inputs Packaging, assembly, and conveyor systems OEM equipment with modular I/O requirements Building automation and auxiliary monitoring systems FAQ Q: Can the IC200UEI016 operate as a standalone I/O module?A: No, it is an expansion module and requires connection to a VersaMax Micro PLC. Q: How many expansion modules can be connected to one controller?A: A single VersaMax Micro PLC typically supports up to four expansion modules, depending on configuration. Q: Does the module provide power to field sensors?A: Yes, it includes a 24 VDC auxiliary output capable of supplying up to 200 mA for sensor devices.
$200.00 $100.00
-
General Electric GE Fanuc IC200UEX212 VersaMax 28-Point I/O Expansion Unit
Product Description The IC200UEX212 discrete expansion module from GE Fanuc Emerson VersaMax family is designed to extend the I/O capacity of VersaMax Micro PLC systems. This compact expansion unit integrates both digital inputs and relay outputs, enabling efficient signal acquisition and control within a single module. With a total of 28 I/O channels, the module combines 24 VDC input capability with robust relay-based outputs suitable for switching both AC and DC loads. The IC200UEX212 is engineered for seamless integration with compatible controllers, offering a cost-effective and space-saving solution for small automation systems requiring additional field connectivity. Key Technical Specifications Parameter Specification Model IC200UEX212 Manufacturer GE Fanuc Emerson Product Series VersaMax Module Type Discrete Expansion Unit Total I/O Points 28 Digital Inputs 16 x 24 VDC Digital Outputs 12 Relay Outputs Input Type 24 VDC (Sink/Source compatible) Output Type Electromechanical Relay Output Configuration Normally Open (NO) Max Output Load 2 A at 24 VDC / 240 VAC (resistive) Sensor Power Supply 24 VDC, up to 200 mA Power Consumption Approx. 8 W Mounting DIN Rail Isolation Relay channel isolation Operating Temperature 0°C to 55°C Weight 1.19 lbs Functional Features Integrated mixed I/O design (inputs + relay outputs in one unit) Relay outputs suitable for direct field device switching Supports both sourcing and sinking input wiring Compact footprint for panel space optimization Designed for direct expansion of VersaMax Micro PLC systems Application Scenarios Machine-level control requiring additional I/O points Conveyor and material handling systems Packaging and assembly equipment HVAC control panels OEM automation skids and compact systems FAQ Q: Is the IC200UEX212 a standalone controller?A: No, this is an expansion unit and must be used with a compatible VersaMax Micro PLC. Q: Can the relay outputs switch high-voltage loads?A: Yes, the relay contacts are rated for switching up to 240 VAC, within the specified current limits. Q: Does this module provide power for field sensors?A: Yes, it includes a 24 VDC auxiliary supply with up to 200 mA capacity for sensor powering.
$200.00 $100.00
-
General Electric GE Fanuc IC200UDR064 VersaMax Micro PLC Controller 24VDC
Product Description The IC200UDR064 from GE Fanuc Emerson VersaMax Micro series is a compact, all-in-one programmable logic controller designed for small to mid-sized automation systems. It integrates a 24 VDC power supply, discrete inputs, and relay outputs into a single housing, reducing panel space and simplifying installation. Engineered for reliability in industrial environments, this micro PLC supports flexible input logic configurations and provides robust relay outputs capable of handling both DC and AC loads. The IC200UDR064 is well-suited for standalone control tasks or distributed automation architectures. Key Technical Specifications Parameter Specification Model IC200UDR064 Manufacturer GE Fanuc Emerson Product Series VersaMax Micro Controller Type Micro PLC Power Supply 24 VDC Total I/O Points 64 Points Digital Inputs 40 x 24 VDC Input Type Sink/Source (Positive & Negative Logic) Digital Outputs 24 Relay Outputs Output Configuration Normally Open (NO) Output Voltage Range Up to 240 VAC / 24 VDC Output Current Rating 2 A per point (Resistive Load) Internal Current Consumption Approx. 400–450 mA (typical combined load) Isolation Relay isolation per output channel Mounting DIN Rail Operating Temperature 0°C to 55°C (typical industrial range) Weight 1.83 lbs Functional Features Integrated design combining CPU, power supply, and I/O Relay outputs suitable for mixed AC/DC load control Flexible input logic selection (sink/source wiring) Compact footprint for space-constrained panels Reliable performance in continuous industrial operation Typical Applications Small machine automation systems Packaging and conveyor control HVAC and building automation Pump and motor control panels OEM equipment integration FAQ Q: Can the IC200UDR064 drive AC loads directly?A: Yes, the relay outputs support switching up to 240 VAC, making them suitable for both AC and DC loads. Q: Does this controller support expansion modules?A: VersaMax Micro controllers have limited or no expansion capability compared to modular PLCs; for scalable systems, the VersaMax modular series is recommended. Q: What type of input wiring is supported?A: The unit supports both sourcing and sinking input configurations, allowing flexibility in field device integration.
$200.00 $100.00
-
General Electric GE IC200CBL002 PLC Communication Cable
Product Description The IC200CBL002 is a dedicated communication cable used within GE VersaMax control systems for configuration, programming, and device communication. It is primarily designed to establish a reliable connection between a Network Interface Unit (NIU) and a PC, enabling system setup, firmware updates, and diagnostics. In the field, this part number is also associated with different variants, including a 3-meter industrial communication cable with M12 connectors and, in some cases, a compact system-bus interface assembly. Regardless of the variation, all versions are engineered to maintain high signal integrity and stable communication under industrial conditions. The cable features robust shielding and industrial-grade insulation, ensuring resistance to electromagnetic interference and long-term durability in control cabinets and factory environments. Key Features Designed for NIU-to-PC programming and configuration tasks Shielded construction for improved noise immunity Industrial connector options including M12 (depending on version) Suitable for system integration and communication diagnostics Durable cable jacket for harsh environments Supports stable, high-integrity data transmission Technical Specifications General Characteristics Part Number: IC200CBL002 (44A770487-001R01) Cable Type: Communication / programming cable Typical Length: 3 meters (cable version) Connector Type: M12 or dedicated interface connector (variant dependent) Weight: 0.1 kg Electrical Performance Signal Type: Low-voltage digital communication Maximum Data Rate: up to 10 Mbps (cable version) Insulation Voltage Rating: up to 300 V AC/DC Shielding: Yes (EMI-resistant design) Environmental Ratings Operating Temperature: –20 °C to +70 °C Storage Temperature: –40 °C to +85 °C Protection Class: up to IP67 (for M12 connector variant) Optional Variant (System-Bus Interface Type) Communication Bandwidth: up to 100 Mbps Supply Voltage: 24 VDC Power Consumption: < 5 W Supported Protocols: Modbus, Profibus, DeviceNet Operating Temperature: –40 °C to +85 °C Applications The IC200CBL002 is commonly used for: Connecting VersaMax NIU modules to a PC for configuration PLC programming and firmware updates Short-distance communication between automation devices System diagnostics and commissioning Industrial communication networks requiring shielded cabling FAQ Q: What is the primary function of this cable?A: The IC200CBL002 (44A770487-001R01) is mainly used for connecting a VersaMax NIU to a computer for configuration and maintenance tasks. Q: Are there multiple versions of this part number?A: Yes. It may refer to either a programming cable or a communication cable assembly depending on the supplier listing. Always verify connector type and specifications before ordering. Q: Is the cable suitable for industrial environments?A: Yes. It is designed with shielding and durable insulation to withstand electrical noise and harsh conditions. Q: Does it support high-speed communication?A: The standard cable supports up to 10 Mbps, while some associated module variants support higher bandwidth.
$200.00 $100.00
You have seen 1032 out of 4916 products