TSI (Turbomachinery Supervisory Instrumentation) systems monitor and protect rotating equipment. We supply modules, sensors, and spares to support both new and discontinued models. Our solutions help reduce downtime and protect critical assets.
TSI Monitoring Systems
-
Bently Nevada Bently Nevada 330180-X1-05 MOD:145004-67 3300 XL Proximitor Sensor
Product Overview The Bently Nevada 330180-X1-05 MOD:145004-67 Proximitor Sensor belongs to the 3300 XL Proximity Transducer System. It delivers precise vibration and position monitoring for critical machinery. Its rugged design ensures long-term stability and operational safety in harsh industrial environments. Technical Specifications Parameter Value Model Number 330180-X1-05 MOD:145004-67 Module Type 3300 XL Proximitor Sensor Manufacturer Bently Nevada Product Range 3300 XL Proximity Transducer System Condition Brand New Dimensions 1.8 × 1.5 × 113 cm Weight 0.08 kg HS Code 8537101190 Minimum Order Quantity 1 Origin USA System TSI Communication Service Ethernet Router Status Active Output Resistance 50 Ω Cable Capacitance 69.9 pF/m Certifications CSA, ATEX, IECEx Probe Tip Material Polyphenylene Sulfide (PPS) Case Material AISI 303 / 304 Stainless Steel Available Lengths 1.0 m, 5.0 m, 9.0 m Functional Description The 330180-X1-05 MOD:145004-67 sensor features a PPS probe tip and stainless steel housing for superior mechanical strength and corrosion resistance. Its lightweight 0.08kg design simplifies installation, while the 113cm length provides flexibility in diverse setups. The sensor maintains consistent signal transmission with a capacitance of 69.9 pF/m and delivers reliable monitoring through its 50 Ω output resistance. Applications and Compatibility The Bently Nevada 330180-X1-05 MOD:145004-67 Proximitor Sensor suits turbines, compressors, and other rotating equipment requiring precise vibration and position monitoring. Its CSA, ATEX, and IECEx certifications make it suitable for hazardous environments. Operators integrate it into both permanent installations and temporary monitoring systems, ensuring compatibility with the 3300 XL series. Key Benefits Compact dimensions (1.8x1.5x113cm) allow installation in restricted spaces. Lightweight 0.08kg design improves handling and replacement efficiency. Stainless steel case resists corrosion and mechanical stress in harsh plants. Certified for hazardous locations, ensuring global compliance and safety. Multiple cable lengths provide flexibility for varied machinery configurations.
$200.00 $100.00
-
Bently Nevada Bently Nevada 330104‑07‑14‑05‑01‑00 | 3300 XL Series | 8 mm Proximity Probe
Overview The Bently Nevada 330104‑07‑14‑05‑01‑00 proximity probe is part of the 3300 XL 8 mm transducer system, designed for high‑accuracy shaft vibration and position measurement in fluid‑film bearing machinery. This model features an armored cable assembly and an M10 × 1 threaded housing, providing mechanical protection and installation flexibility in demanding industrial environments. Key Characteristics 8 mm eddy‑current probe for displacement and vibration monitoring M10 × 1 threaded stainless‑steel body with protective armor Integrated cable design—no separate extension cable required Minimum unthreaded length: 70 mm Minimum case length: 140 mm Factory‑calibrated for AISI 4140 steel; optional calibration for other materials 0.5‑meter coaxial cable with ClickLoc miniature connector and protective cover Suitable for hazardous industrial environments Technical Specifications Parameter Specification Model / Part Number 330104‑07‑14‑05‑01‑00 Probe Type 3300 XL 8 mm Proximity Probe Thread Size M10 × 1 Minimum Unthreaded Length 70 mm Minimum Case Length 140 mm Cable Length 0.5 m (1.6 ft) Cable Type Armored, integrated design Connector Type Miniature coaxial ClickLoc with protective cover Calibration Factory‑set for AISI 4140 steel Measurement Principle Eddy‑current displacement Output Voltage proportional to probe‑target gap Weight 0.06 kg Dimensions 1.8 × 1.6 × 123 cm System Compatibility 3300 XL Proximity Transducer System Condition Brand New Origin USA MOQ 1 HS Code 8537101190 Functional Description The 330104‑07‑14‑05‑01‑00 probe is engineered for precise displacement measurement in rotating machinery. Its armored cable construction protects against abrasion, oil exposure, and mechanical stress, making it suitable for harsh industrial environments. The integrated cable eliminates the need for a separate extension cable, simplifying installation and reducing potential failure points. The probe is factory‑calibrated for AISI 4140 steel, the standard target material for Bently Nevada systems. Custom calibration options allow adaptation to alternative shaft materials when required. The ClickLoc connector ensures secure electrical contact and includes a protective cover to prevent contamination. When paired with a 3300 XL Proximitor sensor, the probe supports accurate monitoring of: Shaft radial vibration Axial position Thermal growth Keyphasor phase reference Overspeed and tachometer applications (with proper configuration) Application Scenarios Steam and gas turbines Centrifugal compressors Industrial pumps and fans Gearboxes and generators Machinery requiring armored probe assemblies FAQ Q: Can this probe be used for tachometer or overspeed applications? A: Yes, but proper configuration is required. Refer to the relevant Bently Nevada application notes. Q: Does this model require a separate extension cable? A: No. It uses an integrated armored cable assembly. Q: Can the probe be calibrated for materials other than AISI 4140? A: Yes. Custom calibration is available upon request.
$200.00 $100.00
-
Bently Nevada Bently Nevada 330103‑17‑22‑10‑12‑05 | 3300 XL Series | 8 mm Proximity Probe
Overview The Bently Nevada 330103‑17‑22‑10‑12‑05 proximity probe is an extended‑reach 8 mm sensor designed for high‑accuracy displacement and vibration measurement in fluid‑film bearing machinery. Its long unthreaded and case lengths support installations where the sensing point is located deeper within the machine housing. The probe incorporates a FluidLoc‑protected cable, offering superior resistance to oil ingress in lubrication‑rich environments. Key Characteristics 8 mm eddy‑current probe for shaft vibration and position monitoring M10 × 1 threaded stainless‑steel housing Extended unthreaded length (170 mm) and case length (220 mm) for deep‑reach installations 1.0‑meter FluidLoc cable with miniature coaxial ClickLoc connector Designed for static position, dynamic vibration, and Keyphasor reference measurements Fully interchangeable with 3300 XL and legacy 3300 5 mm / 8 mm components Certified for hazardous locations (CSA, ATEX, IECEx) Suitable for oil‑exposed environments due to FluidLoc cable protection Technical Specifications Parameter Specification Model / Part Number 330103‑17‑22‑10‑12‑05 Probe Type 3300 XL 8 mm Proximity Probe Thread Size M10 × 1 Minimum Unthreaded Length 170 mm Case Length 220 mm Cable Type FluidLoc oil‑resistant cable Cable Length 1.0 m Connector Type Miniature coaxial ClickLoc Measurement Principle Eddy‑current displacement Output Voltage proportional to probe‑target gap Certifications CSA, ATEX, IECEx Interchangeability XL and non‑XL 3300 5 mm / 8 mm systems Weight 1.48 kg Dimensions 28 × 26 × 6 cm System Compatibility 3300 XL Proximity Transducer System Condition Brand New Origin USA MOQ 1 HS Code 8537101190 Functional Description The 330103‑17‑22‑10‑12‑05 probe is engineered for installations requiring extended reach into machine housings, bearing pedestals, or confined structural cavities. Its FluidLoc cable construction prevents oil penetration, ensuring long‑term signal stability in lubrication‑intensive environments such as turbines and compressors. As part of the 3300 XL system, the probe works with matched extension cables and Proximitor sensors to deliver accurate monitoring of: Shaft radial vibration Axial position Thermal expansion Keyphasor phase reference Speed measurement The probe maintains the standard 4‑hole mounting pattern used across the 3300 family, simplifying retrofits and system upgrades. Its hazardous‑area certifications support deployment in oil & gas, power generation, and heavy industrial facilities. Application Scenarios Steam and gas turbines Centrifugal and axial compressors Gearboxes and industrial pumps Machinery requiring deep‑reach probe installation Oil‑rich environments where cable protection is critical FAQ Q: What makes the FluidLoc cable different from standard probe cables? A: FluidLoc provides enhanced resistance to oil penetration, improving long‑term reliability in lubrication‑exposed installations. Q: Can this probe replace older 3300 8 mm probes? A: Yes. It is electrically and mechanically compatible when installed with matched cable lengths. Q: Is this probe suitable for hazardous areas? A: It carries CSA, ATEX, and IECEx certifications for global hazardous‑location compliance.
$200.00 $100.00
-
Bently Nevada Bently Nevada 330703‑000‑100‑10‑11‑00 | 3300 XL Series | 11 mm Proximity Probe
Overview The Bently Nevada 330703‑000‑100‑10‑11‑00 proximity probe is part of the 3300 XL 11 mm transducer family, designed for high‑accuracy displacement and vibration measurement in fluid‑film bearing machinery. Its larger 11 mm tip provides an extended linear range, making it suitable for applications requiring greater measurement clearance or higher vibration amplitudes. Key Characteristics 11 mm probe tip for extended linear range M14 × 1.5 threaded body, non‑armored configuration Minimum unthreaded length: 0 mm Minimum probe length: 100 mm 1.0‑meter coaxial cable with ClickLoc miniature connector and connector protector Designed for static position, dynamic vibration, and Keyphasor reference measurements Compatible with 3300 XL extension cables and Proximitor sensors Built to meet regional installation requirements while maintaining global 3300 XL performance standards Technical Specifications Parameter Specification Model / Part Number 330703‑000‑100‑10‑11‑00 Probe Type 3300 XL 11 mm Proximity Probe Thread Size M14 × 1.5 Minimum Unthreaded Length 0 mm Minimum Probe Length 100 mm Cable Length 1.0 m (3.3 ft) Connector Type Miniature coaxial ClickLoc with protector Measurement Principle Eddy‑current displacement Output Voltage proportional to probe‑target gap Target Material Conductive (typically 4140 steel) Weight 0.08 kg Dimensions 116 × 2.5 × 2 cm System Compatibility 3300 XL Proximity Transducer System Condition Brand New Origin USA MOQ 1 HS Code 8537101190 Functional Description The 330703‑000‑100‑10‑11‑00 probe operates as part of a three‑component transducer system consisting of the probe, extension cable, and Proximitor sensor. Its eddy‑current sensing technology produces a voltage proportional to the distance between the probe tip and the rotating shaft surface, enabling accurate monitoring of: Shaft radial vibration Axial position Thermal growth Keyphasor phase reference Speed measurement The 11 mm probe design offers a wider linear range than 5 mm or 8 mm probes, making it suitable for large‑shaft machinery or applications with higher displacement amplitudes. The ClickLoc connector ensures secure electrical contact, while the probe’s construction supports installation in demanding industrial environments. Application Scenarios Steam and gas turbines Large compressors High‑speed rotating machinery Power generation and process industries Installations requiring extended linear range or region‑specific configurations FAQ Q: Is this probe compatible with standard 3300 XL systems? A: Yes. It integrates seamlessly with 3300 XL extension cables and Proximitor sensors. Q: What advantages does an 11 mm probe offer? A: It provides a wider linear range, making it ideal for large‑shaft or high‑displacement applications. Q: Can this probe be used for Keyphasor measurements? A: Yes. When paired with the appropriate Proximitor module, it supports phase reference and speed measurement.
$200.00 $100.00
-
Bently Nevada Bently Nevada 330102‑00‑20‑15‑02‑00 | 3300 XL Series | 8 mm Proximity Probe
Overview The Bently Nevada 330102‑00‑20‑15‑02‑00 proximity probe is part of the 3300 XL 8 mm transducer family, engineered for precise shaft vibration and position measurement in fluid‑film bearing machinery. Its eddy‑current sensing technology delivers stable, linear output suitable for both protection and diagnostic applications in high‑value rotating equipment. Key Characteristics 8 mm probe tip optimized for API 670‑compliant installations 3/8‑24 UNF stainless steel threaded housing Minimum case length of 2 inches for compact mounting locations 1.5‑meter coaxial cable with ClickLoc miniature connector Fully interchangeable with 3300 XL and legacy 3300 components Designed for static position, dynamic vibration, and Keyphasor reference measurements Rugged construction for harsh industrial environments Technical Specifications Parameter Specification Model / Part Number 330102‑00‑20‑15‑02‑00 Probe Type 3300 XL 8 mm Proximity Probe Thread Size 3/8‑24 UNF Minimum Case Length 2 in Cable Length 1.5 m Connector Type Miniature coaxial ClickLoc Sensitivity 200 mV/mil Power Supply −24 V DC (via Proximitor sensor) Measurement Principle Eddy‑current displacement Operating Temperature −20°C to +80°C Housing Material Stainless steel Weight 1.48 kg Dimensions 28 × 26 × 6 cm System Compatibility 3300 XL Proximity Transducer System Interchangeability XL and non‑XL 3300 series Condition Brand New Origin USA MOQ 1 HS Code 8537101190 Functional Description The 330102‑00‑20‑15‑02‑00 probe forms part of a three‑component transducer system consisting of the probe, extension cable, and Proximitor sensor. The probe generates a voltage proportional to the distance between the probe tip and the rotating shaft surface, enabling accurate monitoring of: Shaft radial vibration Axial position Thermal growth Keyphasor phase reference Speed measurement Its stainless steel housing and armored cable options support installation in demanding environments. The probe maintains the same mounting pattern as earlier 3300 designs, simplifying upgrades and retrofits. With standardized electrical characteristics and full component interchangeability, the probe ensures consistent performance across new and existing systems. Application Scenarios Steam and gas turbines Centrifugal compressors Industrial pumps Gearboxes and generators Oil & gas, power generation, and heavy industrial machinery FAQ Q: Is this probe compatible with older 3300 systems? A: Yes. It is electrically and mechanically interchangeable with both XL and non‑XL 3300 components when matched by cable length. Q: What is the typical linear range of an 8 mm probe? A: Approximately 2 mm, depending on calibration and target material. Q: Can this probe be used for Keyphasor applications? A: Yes. When paired with the appropriate Proximitor module, it supports phase reference and speed measurement.
$200.00 $100.00
-
Bently Nevada Bently Nevada 21747‑085‑01 | 3300 XL Series | Proximitor Probe Extension Cable
Overview The Bently Nevada 21747‑085‑01 extension cable is designed for use within the 3300 XL Proximity Transducer System, providing stable signal transmission between proximity probes and Proximitor sensors. Its construction supports long‑distance routing in industrial environments while maintaining signal integrity required for accurate vibration and position measurements. Key Characteristics 85‑ft (25.9‑m) shielded extension cable Designed for eddy‑current proximity probe systems High‑temperature and high‑voltage tolerance Fully compatible with 3300 XL and legacy 3300 5 mm / 8 mm components Copper‑braid shielding for noise reduction Suitable for harsh industrial environments Technical Specifications Parameter Specification Model / Part Number 21747‑085‑01 Cable Type Proximitor Probe Extension Cable Length 85 ft (25.9 m) Voltage Rating 300 V AC/DC Capacitance ≤95 pF/m (≤29 pF/ft) Minimum Bend Radius 75 mm (3 in) Shielding 95% copper braid Temperature Range −40°C to +150°C (−40°F to 302°F) Weight 0.08 kg Dimensions 112 × 1.5 × 1.2 cm System Compatibility 3300 XL Proximity Transducer System Interchangeability Compatible with non‑XL 3300 5 mm / 8 mm systems Condition Brand New Origin USA MOQ 1 HS Code 8537101190 Functional Description The 21747‑085‑01 extension cable is engineered to maintain the electrical characteristics required for accurate eddy‑current displacement measurements. Its low capacitance and high shielding efficiency ensure minimal signal degradation over long distances, making it suitable for installations where probes must be routed through complex machinery layouts. The cable’s copper‑braid shielding minimizes electromagnetic interference, while its wide temperature tolerance supports operation near hot process equipment. Although the 3300 XL Proximitor Sensor uses updated packaging, this cable retains the same mounting footprint and routing requirements as earlier 3300 systems, provided the minimum bend radius is maintained. Application Scenarios Turbines and compressors Pumps and industrial fans Gearboxes and generators Machinery requiring long‑distance probe‑to‑sensor routing API 670‑compliant vibration monitoring systems FAQ Q: Can this cable be used with older 3300 proximity probes? A: Yes. The cable is electrically and mechanically compatible with non‑XL 3300 5 mm and 8 mm components. Q: Does cable length affect calibration? A: No. The 3300 XL system is designed for component interchangeability, provided the probe, extension cable, and Proximitor sensor are matched by length. Q: Is the shielding adequate for high‑noise environments? A: The 95% copper‑braid shield provides strong EMI protection suitable for heavy industrial settings.
$200.00 $100.00
-
Bently Nevada Bently Nevada 330101‑00‑53‑05‑02‑05 | 3300 XL Series | 8 mm Proximity Probe
Overview The Bently Nevada 330101‑00‑53‑05‑02‑05 proximity probe is part of the 3300 XL 8 mm sensing platform, engineered for precise shaft vibration and position measurement in fluid‑film bearing machinery. Its eddy‑current measurement technology provides stable, linear output across a wide operating range, making it suitable for both protection and diagnostic applications. Key Characteristics 8 mm probe tip optimized for standard API 670‑compliant installations 3/8‑24 UNF threaded body, non‑armored configuration 0.5 m integrated coaxial cable with ClickLoc miniature connector Designed for static position, dynamic vibration, and Keyphasor reference measurements Fully interchangeable components within the 3300 XL system Certified for hazardous locations (CSA, ATEX, IECEx) Manufactured in the USA with strict quality control Technical Specifications Parameter Specification Model / Part Number 330101‑00‑53‑05‑02‑05 Probe Type 3300 XL 8 mm Proximity Probe Thread Size 3/8‑24 UNF Minimum Case Length 5.3 in Cable Length 0.5 m (1.6 ft) Connector Type Miniature coaxial ClickLoc Measurement Principle Eddy‑current displacement Output Voltage proportional to probe‑target gap Target Material Conductive (typically 4140 steel) Weight 0.06 kg Dimensions 1.8 × 1.6 × 123 cm System Compatibility 3300 XL Proximity Transducer System Certifications CSA, ATEX, IECEx API 670 Compliance Yes Condition Brand New Origin USA MOQ 1 HS Code 8537101190 Functional Description The 330101‑00‑53‑05‑02‑05 probe operates as part of a three‑component transducer system consisting of the probe, extension cable, and Proximitor sensor. The probe generates a voltage output proportional to the distance between the probe tip and the rotating shaft surface, enabling accurate monitoring of: Shaft radial vibration Axial position Thermal growth Keyphasor phase reference Speed measurement The 8 mm probe design offers a well‑defined linear range suitable for most industrial rotating machinery. Its ClickLoc connector ensures secure electrical contact, while the non‑armored cable configuration supports installations in protected routing environments. Application Scenarios Steam and gas turbines Centrifugal compressors Industrial pumps Gearboxes and generators High‑speed rotating equipment requiring API‑compliant monitoring FAQ Q: Is the probe compatible with older 3300 systems? A: Yes. The 3300 XL series maintains backward compatibility when used with matched extension cables and Proximitor sensors. Q: What is the typical linear range of an 8 mm probe? A: The 8 mm probe typically provides a linear range of approximately 2 mm, depending on calibration and target material. Q: Can this probe be used for Keyphasor applications? A: Yes. The probe supports phase reference and speed measurement when paired with the appropriate Proximitor module.
$200.00 $100.00
-
Bently Nevada Bently Nevada 330500‑04‑01 | Velomitor Series | Piezo‑Velocity Sensor
Overview The Bently Nevada 330500‑04‑01 piezo‑velocity sensor is part of the Velomitor family, designed to measure absolute vibration on machine casings, bearing housings, and structural components. Its solid‑state piezoelectric architecture provides stable, drift‑free velocity output suitable for continuous condition monitoring and protection systems. Key Characteristics Piezoelectric velocity sensing element with no moving parts Direct measurement of casing vibration for diagnostics and protection Compatible with Bently Nevada monitoring platforms, including TSI systems Rugged construction for long‑term operation in harsh industrial environments Mounting flexibility: vertical, horizontal, or angled installation Manufactured in the USA with consistent quality control Technical Specifications Parameter Specification Model / Part Number 330500‑04‑01 Sensor Type Velomitor Piezo‑Velocity Sensor Measurement Type Absolute vibration (velocity) Mounting Thread 1/2‑20 UNF adapter Output Piezoelectric velocity signal Weight 0.55 kg Dimensions 20.5 × 22.4 × 3.3 cm Operating Status Active Minimum Order Quantity 1 Country of Origin USA HS Code 8537101190 System Compatibility TSI and Bently Nevada monitoring systems Condition Brand New Functional Description The 330500‑04‑01 sensor converts casing vibration into a proportional electrical signal using a solid‑state piezoelectric element. This design eliminates mechanical wear and ensures stable frequency response across a wide operating range. The sensor is optimized for detecting: Unbalance Misalignment Mechanical looseness Structural resonance Rotor‑to‑casing vibration transmission Its 1/2‑20 UNF mounting adapter allows secure attachment to bearing housings or machine frames. Proper mounting torque and surface preparation are essential to maintain accurate amplitude and frequency response. Application Scenarios Steam and gas turbines Centrifugal and axial compressors Industrial pumps Electric motors and generators Gearboxes and high‑speed rotating equipment FAQ Q: Does the sensor require a specific mounting orientation? A: No. The piezoelectric design supports installation in any orientation without affecting measurement accuracy. Q: What type of vibration does the sensor measure? A: It measures absolute casing vibration in velocity units, ideal for machinery protection and diagnostics. Q: Can it replace legacy velocity transducers? A: Yes. The solid‑state design offers improved reliability compared to moving‑coil velocity pickups.
$200.00 $100.00
-
Bently Nevada Bently Nevada | 330704-000-040-10-02-05 | 3300 XL 11 mm Proximity Probe
Overview The Bently Nevada 330704‑000‑040‑10‑02‑05 proximity probe is part of the 3300 XL 11 mm sensing platform, engineered for high‑accuracy shaft vibration and position measurement in fluid‑film bearing machinery. Its mechanical design, electrical characteristics, and environmental robustness make it suitable for continuous monitoring and protection systems in demanding industrial environments. Key Features 11 mm tip diameter for extended linear range and improved signal stability M14 × 1.5 threaded body with armored construction for mechanical protection Standard 1.0 m coaxial probe cable with ClickLoc miniature connector Compatible with 3300 XL extension cables and Proximitor sensors Designed for static position, dynamic vibration, and Keyphasor reference measurements Suitable for turbines, compressors, pumps, and high‑speed rotating equipment Manufactured in the USA with full compliance to global instrumentation standards Technical Specifications Parameter Specification Model / Part Number 330704‑000‑040‑10‑02‑05 Probe Type 3300 XL 11 mm Proximity Probe Thread Size M14 × 1.5 Minimum Unthreaded Length 0 mm Minimum Total Length 40 mm Cable Length 1.0 m (3.3 ft) Connector Type Miniature coaxial ClickLoc System Compatibility 3300 XL Proximity Transducer System Output Characteristics Voltage proportional to probe‑target gap Target Material Conductive (typically 4140 steel) Weight 0.16 kg HS Code 8537101190 Dimensions 2 × 2 × 119 cm Operating Status Active, not discontinued Origin USA Minimum Order Quantity 1 Functional Description The 330704‑000‑040‑10‑02‑05 probe operates as part of a three‑component transducer system consisting of the probe, extension cable, and Proximitor sensor. When installed, the probe generates a precise voltage output proportional to the distance between the probe tip and the rotating shaft surface. This enables accurate monitoring of: Shaft radial vibration Axial position Thermal growth Keyphasor phase reference Speed measurement The armored cable and ClickLoc connector ensure long‑term reliability in high‑temperature, high‑vibration, or oil‑contaminated environments. The probe’s 11 mm design provides a wider linear range compared to 5 mm or 8 mm probes, making it ideal for large‑shaft or high‑displacement applications. Application Scenarios Steam and gas turbines Centrifugal compressors Industrial pumps Gearboxes and generators High‑speed rotating machinery requiring API‑670 compliant monitoring FAQ Q: Can this probe be used with older 3300 systems? A: Yes. The 3300 XL series maintains backward compatibility with legacy 3300 extension cables and Proximitor sensors when installed as a matched set. Q: What is the typical linear range of an 11 mm probe? A: The 11 mm probe typically provides a linear range of approximately 4 mm, depending on the target material and system calibration. Q: Is the probe suitable for Keyphasor applications? A: Yes. The probe supports phase reference and speed measurement when paired with the appropriate Proximitor module.
$200.00 $100.00
-
Bently Nevada Bently Nevada 330103‑00‑17‑10‑02‑CN | 3300 XL Series | 8 mm Proximity Probe
Overview The Bently Nevada 330103‑00‑17‑10‑02‑CN proximity probe is part of the 3300 XL 8 mm transducer family, engineered for high‑accuracy shaft vibration and position measurement in fluid‑film bearing machinery. Built with a stainless‑steel housing and an M10 × 1 threaded configuration, this model provides stable performance in demanding industrial environments while maintaining full compatibility with the 3300 XL monitoring platform. Key Characteristics 8 mm eddy‑current probe for displacement and vibration monitoring M10 × 1 threaded stainless‑steel body with 17 mm case length Integrated 1.0‑meter coaxial cable with ClickLoc miniature connector Wide operating temperature range: −52°C to +177°C (extendable to +218°C with ETR components) Lightweight construction for simplified installation Fully compatible with all 3300 XL proximity transducer components Suitable for both static position and dynamic vibration measurement Technical Specifications Parameter Specification Model / Part Number 330103‑00‑17‑10‑02‑CN Probe Type 3300 XL 8 mm Proximity Probe Thread Size M10 × 1 Case Length 17 mm Cable Length 1.0 m Connector Type Miniature coaxial ClickLoc Operating Temperature −52°C to +177°C (up to +218°C with ETR) Measurement Principle Eddy‑current displacement Output Voltage proportional to probe‑target gap Weight 0.06 kg Dimensions 1.8 × 1.6 × 123 cm System Compatibility 3300 XL Proximity Transducer System Condition Brand New Origin USA MOQ 1 HS Code 8537101190 Functional Description The 330103‑00‑17‑10‑02‑CN probe is designed to deliver precise displacement and vibration measurements for rotating machinery. Its stainless‑steel housing and compact mechanical profile support installation in confined or high‑density equipment layouts. The integrated 1‑meter cable eliminates the need for a separate extension cable in many applications, simplifying installation and reducing potential failure points. The probe’s sensing element generates a voltage proportional to the distance between the probe tip and the conductive target surface, enabling accurate monitoring of: Shaft radial vibration Axial position Thermal growth Keyphasor phase reference Its wide temperature capability and rugged construction make it suitable for turbines, compressors, pumps, and other critical assets operating in harsh industrial environments. The probe maintains full electrical and mechanical compatibility with all 3300 XL components, ensuring seamless integration into existing systems without requiring matched sets or recalibration. Application Scenarios Steam and gas turbines Centrifugal compressors Industrial pumps and fans Gearboxes and generators Machinery requiring high‑temperature probe operation FAQ Q: What does the “CN” suffix indicate It identifies a configuration tailored for regional installation requirements while maintaining full 3300 XL compatibility. Q: Can this probe be used in high‑temperature environments Yes. It supports up to +177°C, and up to +218°C when used with ETR components. Q: Is this probe compatible with older 3300 systems Yes. It integrates seamlessly with both XL and legacy 3300 components.
$200.00 $100.00
-
Bently Nevada Bently Nevada 330101‑00‑12‑20‑12‑CN | 3300 XL Series | 8 mm Proximity Probe
Overview The Bently Nevada 330101‑00‑12‑20‑12‑CN proximity probe is part of the 3300 XL 8 mm transducer family, engineered for high‑accuracy shaft vibration and position measurement in fluid‑film bearing machinery. This model is built to meet regional configuration requirements while maintaining full compatibility with the global 3300 XL platform. Its durable mechanical design and stable electrical characteristics ensure dependable performance in harsh industrial environments. Key Characteristics 8 mm eddy‑current probe for displacement and vibration monitoring 3/8‑24 UNF threaded stainless‑steel housing Minimum unthreaded length: 0 in Case length: 1.2 in Integrated 2.0‑meter coaxial cable for flexible installation FluidLoc cable construction for oil‑resistant performance Miniature ClickLoc connector for secure electrical connection Fully interchangeable with all 3300 XL and legacy 3300 5 mm / 8 mm components Technical Specifications Parameter Specification Model / Part Number 330101‑00‑12‑20‑12‑CN Probe Type 3300 XL 8 mm Proximity Probe Thread Size 3/8‑24 UNF Minimum Unthreaded Length 0 in Case Length 1.2 in Cable Length 2.0 m Cable Type FluidLoc oil‑resistant cable Connector Type Miniature coaxial ClickLoc Measurement Principle Eddy‑current displacement Calibration Factory‑set for AISI 4140 steel (other materials optional) Weight 0.06 kg Dimensions 1.8 × 1.6 × 123 cm System Compatibility 3300 XL Proximity Transducer System Condition Brand New Origin USA MOQ 1 HS Code 8537101190 Functional Description The 330101‑00‑12‑20‑12‑CN probe is designed for precise vibration and shaft position measurement in rotating machinery. Its 2‑meter cable provides installation flexibility, allowing the probe to be positioned optimally without compromising signal quality. The FluidLoc cable construction prevents oil migration through the cable interior, making it suitable for lubrication‑rich environments such as turbines and compressors. The probe maintains the required side‑view clearances and tip‑to‑tip spacing associated with 8 mm probes, ensuring compatibility with standard mounting geometries. Its ClickLoc connector provides a secure, vibration‑resistant electrical interface, reducing the risk of accidental disconnection. As part of the 3300 XL system, the probe is fully interchangeable with extension cables and Proximitor sensors, eliminating the need for matched components or bench calibration. This simplifies installation, maintenance, and system upgrades. Application Scenarios Steam and gas turbines Centrifugal compressors Industrial pumps and fans Gearboxes and generators Machinery requiring standard 8 mm probe spacing FAQ Q: What does the “CN” suffix indicate It denotes a configuration tailored for regional installation requirements while maintaining full 3300 XL compatibility. Q: Is this probe compatible with older 3300 systems Yes. It is fully interchangeable with both XL and non‑XL 3300 5 mm and 8 mm components. Q: What advantage does the FluidLoc cable provide It prevents oil migration through the cable, improving long‑term reliability in lubrication‑rich environments.
$200.00 $100.00
-
Bently Nevada Bently Nevada 330101‑00‑09‑10‑02‑05 | 3300 XL Series | 8 mm Proximity Probe
Overview The Bently Nevada 330101‑00‑09‑10‑02‑05 proximity probe is part of the 3300 XL 8 mm eddy‑current transducer system, engineered for precise shaft vibration and position measurement in fluid‑film bearing machinery. Its compact mechanical design and stable electrical characteristics make it suitable for continuous monitoring in demanding industrial environments. Key Characteristics 8 mm eddy‑current probe for displacement and vibration monitoring Designed for use with 3300 XL extension cables and Proximitor sensors Optional connector protectors available for enhanced environmental sealing Lightweight construction for easy installation in confined spaces Fully interchangeable with 3300 XL and legacy 3300 5 mm / 8 mm components Suitable for high‑vibration, high‑temperature industrial applications Technical Specifications Parameter Specification Model / Part Number 330101‑00‑09‑10‑02‑05 Probe Type 3300 XL 8 mm Proximity Probe Thread Size Standard 3300 XL probe threading Cable Length 1.0 m (3.3 ft) Cable Type Unarmored coaxial cable Connector Type Miniature coaxial ClickLoc Measurement Principle Eddy‑current displacement Environmental Protection Optional connector protectors Weight 0.06 kg Dimensions 1.8 × 1.6 × 123 cm System Compatibility 3300 XL Proximity Transducer System Condition Brand New Origin USA MOQ 1 HS Code 8537101190 Functional Description The 330101‑00‑09‑10‑02‑05 probe is engineered to deliver accurate displacement and vibration measurements across a wide operating range. Its compact design supports installation in tight or high‑density machinery layouts. The probe can be supplied with pre‑installed connector protectors to shield electrical connections from moisture, dust, and contaminants—an important feature for harsh industrial environments. Connector protectors may also be ordered separately for field installations, especially when cables must be routed through narrow conduits or complex pathways. These accessories help maintain long‑term signal integrity and reduce maintenance requirements. The probe is fully compatible with 3300 XL extension cables and Proximitor sensors, ensuring stable performance without requiring matched components or bench calibration. Application Scenarios Steam and gas turbines Centrifugal compressors Industrial pumps and fans Gearboxes and generators Machinery requiring compact probe installation FAQ Q: Are connector protectors required for all installations They are recommended for environments with moisture, dust, or contaminants to ensure long‑term signal reliability. Q: Is this probe compatible with older 3300 systems Yes. It is fully interchangeable with both XL and non‑XL 3300 5 mm and 8 mm components. Q: Does the probe require calibration No. Calibration is performed at the Proximitor sensor level, not the probe.
$200.00 $100.00
-
Bently Nevada Bently Nevada 190501‑07‑00‑04 | Velomitor CT Series | Velocity Transducer
Overview The Bently Nevada 190501‑07‑00‑04 Velomitor CT velocity transducer is engineered for low‑frequency vibration monitoring on slow‑speed rotating equipment. Designed specifically for applications such as cooling tower fans and air‑cooled heat‑exchanger units operating between 100 and 300 rpm, the sensor provides accurate casing vibration velocity measurements essential for machinery protection and predictive maintenance programs. Key Characteristics Low‑frequency velocity transducer optimized for slow‑speed machinery Measures casing vibration velocity for cooling towers, heat‑exchanger fans, and similar equipment 3/8‑24 threaded stud with 7‑pin MIL‑C‑5015 connector Certified for hazardous locations including Class I, Div 1 and ATEX/IECEx Zone 0/1 Robust mechanical design suitable for harsh industrial environments Provides reliable velocity output for monitoring and control systems Technical Specifications Parameter Specification Model / Part Number 190501‑07‑00‑04 Product Type Velomitor CT Velocity Transducer Measurement Type Casing vibration velocity Frequency Range Optimized for 100–300 rpm machinery Mounting Thread 3/8‑24 stud Electrical Connector 7‑pin MIL‑C‑5015 Certifications CSA/NRTL/C, ATEX, IECEx (Class I, Div 1 / Zone 0/1) Weight 0.44 kg Shipping Dimensions 7.3 × 5 × 10 cm System Compatibility Bently Nevada monitoring and protection systems Condition Brand New Origin USA MOQ 1 HS Code 8537101190 Functional Description The 190501‑07‑00‑04 Velomitor CT transducer is designed to capture low‑frequency vibration signals that traditional velocity sensors may not detect effectively. Its mechanical and electrical configuration ensures accurate measurement of both vibration amplitude and frequency components generated by slow‑speed fan motors, gear reducers, and drive assemblies. The rugged housing and MIL‑C‑5015 connector provide secure electrical connections in high‑vibration environments. Its hazardous‑area certifications allow deployment in potentially explosive atmospheres, making it suitable for petrochemical plants, refineries, and power generation facilities. This model integrates seamlessly into Bently Nevada monitoring systems, delivering stable velocity output for alarm, shutdown, and trending functions. Its compact size and straightforward mounting interface support quick installation and reliable long‑term operation. Application Scenarios Cooling tower fan assemblies Air‑cooled heat‑exchanger fans Slow‑speed rotating machinery (100–300 rpm) Gear‑driven fan systems Hazardous‑area industrial environments FAQ Q: What makes this sensor suitable for cooling tower applications It is optimized for low‑frequency vibration, which is typical of slow‑speed fan assemblies. Q: Can this transducer be used in hazardous areas Yes. It carries CSA, ATEX, and IECEx certifications for Class I, Div 1 and Zone 0/1 environments. Q: What type of connector does it use A 7‑pin MIL‑C‑5015 connector ensures secure and reliable signal transmission.
$200.00 $100.00
-
Bently Nevada Bently Nevada 330103‑00‑15‑10‑02‑CN | 3300 XL Series | 8 mm Proximity Probe
Overview The Bently Nevada 330103‑00‑15‑10‑02‑CN proximity probe is part of the 3300 XL 8 mm eddy‑current transducer system, engineered for precise shaft vibration and position measurement in fluid‑film bearing machinery. This model is designed to meet regional installation requirements while maintaining full compatibility with the global 3300 XL platform. Its stable electrical characteristics and rugged mechanical design ensure long‑term reliability in demanding industrial environments. Key Characteristics 8 mm eddy‑current probe for displacement and vibration monitoring M10 × 1 threaded stainless‑steel housing Minimum unthreaded length: 0 mm Case length: 140 mm 1.0‑meter integrated coaxial cable with ClickLoc miniature connector Fully compliant with API 670 mechanical and performance requirements Interchangeable with all 3300 XL and legacy 3300 5 mm / 8 mm components Designed for regional (CN) specifications while maintaining global performance standards Technical Specifications Parameter Specification Model / Part Number 330103‑00‑15‑10‑02‑CN Probe Type 3300 XL 8 mm Proximity Probe Thread Size M10 × 1 Minimum Unthreaded Length 0 mm Case Length 140 mm Cable Length 1.0 m Connector Type Miniature coaxial ClickLoc Measurement Principle Eddy‑current displacement Calibration Factory‑set for AISI 4140 steel (other materials optional) Weight 0.06 kg Dimensions 1.8 × 1.6 × 123 cm System Compatibility 3300 XL Proximity Transducer System Condition Brand New Origin USA MOQ 1 HS Code 8537101190 Functional Description The 330103‑00‑15‑10‑02‑CN probe is engineered to deliver accurate displacement and vibration measurements across a wide operating range. As part of the 3300 XL system, it forms a matched transducer assembly with an extension cable and Proximitor sensor, ensuring stable performance without requiring component matching or bench calibration. The probe complies with API 670 requirements for: Mechanical configuration Linear range Sensitivity Temperature stability Its 1.0‑meter cable and compact mechanical dimensions support installation in confined or high‑density machinery layouts. The ClickLoc connector ensures secure electrical contact and reduces the risk of accidental disconnection. This model is suitable for both standard vibration monitoring and overspeed protection applications when paired with the appropriate Proximitor sensor. Application Scenarios Steam and gas turbines Centrifugal compressors Industrial pumps and fans Gearboxes and generators Machinery requiring API 670‑compliant monitoring FAQ Q: What does the “CN” suffix indicate? A: It denotes a configuration tailored for regional installation requirements while maintaining full 3300 XL performance. Q: Is this probe compatible with older 3300 systems? A: Yes. It is fully interchangeable with both XL and non‑XL 3300 5 mm and 8 mm components. Q: Can the probe be calibrated for different shaft materials? A: Yes. Custom calibration is available upon request.
$200.00 $100.00
-
Bently Nevada Bently Nevada 330103‑00‑05‑20‑02‑00 | 3300 XL Series | 8 mm Proximity Probe
Overview The Bently Nevada 330103‑00‑05‑20‑02‑00 proximity probe is part of the 3300 XL 8 mm transducer system, engineered for precise shaft vibration and position measurement in fluid‑film bearing machinery. This model features an M10 × 1 threaded housing, a compact mechanical profile, and a 2‑meter integrated cable, making it suitable for a wide range of industrial monitoring applications. Key Characteristics 8 mm eddy‑current probe for displacement and vibration monitoring M10 × 1 stainless‑steel threaded body, non‑armored configuration Minimum unthreaded length: 0 mm Minimum case length: 50 mm 2.0‑meter coaxial cable with ClickLoc miniature connector Optional FluidLoc cable for oil‑rich environments Locknut with pre‑drilled safety‑wire holes for secure installation Factory‑calibrated for AISI 4140 steel; alternative calibration available Technical Specifications Parameter Specification Model / Part Number 330103‑00‑05‑20‑02‑00 Probe Type 3300 XL 8 mm Proximity Probe Thread Size M10 × 1 Minimum Unthreaded Length 0 mm Minimum Case Length 50 mm Cable Length 2.0 m (6.6 ft) Cable Type Standard coaxial; optional FluidLoc Connector Type Miniature coaxial ClickLoc Measurement Principle Eddy‑current displacement Calibration Factory‑set for AISI 4140 steel Weight 0.08 kg Dimensions 1.8 × 1.5 × 113 cm System Compatibility 3300 XL Proximity Transducer System Condition Brand New Origin USA MOQ 1 HS Code 8537101190 Functional Description The 330103‑00‑05‑20‑02‑00 probe is designed for accurate displacement and vibration measurement in rotating machinery. Its non‑armored configuration is ideal for installations where cable routing is protected or enclosed. The 2‑meter cable provides flexibility for medium‑distance installations, while the ClickLoc connector ensures secure electrical contact. Optional FluidLoc cable construction prevents oil migration through the cable interior, making the probe suitable for lubrication‑rich environments such as turbines and compressors. Connector protectors are recommended for humid or moisture‑prone installations. The probe is factory‑calibrated for AISI 4140 steel, the standard target material for Bently Nevada systems. Calibration for alternative shaft materials is available upon request to ensure measurement accuracy. This model supports both standard vibration monitoring and overspeed protection applications when paired with the appropriate Proximitor sensor. Application Scenarios Steam and gas turbines Centrifugal compressors Industrial pumps and fans Gearboxes and generators Overspeed and tachometer monitoring (with proper configuration) FAQ Q: Can this probe be used in oil‑exposed environments? A: Yes, but the optional FluidLoc cable is recommended for oil‑rich applications. Q: Is the probe compatible with older 3300 systems? A: Yes. It is fully interchangeable with both XL and non‑XL 3300 5 mm and 8 mm components. Q: Can the probe be calibrated for materials other than AISI 4140? A: Yes. Custom calibration is available upon request.
$200.00 $100.00
-
Bently Nevada Bently Nevada 330500-04-00 Velomitor Piezo-velocity Sensor
Overview The 330500-04-00 Velomitor Piezo-velocity Sensor from Bently Nevada is engineered for precise vibration monitoring of industrial machinery. It measures absolute vibration relative to free space, supporting predictive maintenance and operational safety. Technical Specifications Specification Details Model Number 330500-04-00 Manufacturer Bently Nevada Product Series Bently Nevada Module Type Vibration Sensor Dimensions 1.8 x 1.6 x 123 cm Weight 0.06 kg System Compatibility TSI Communication Interface Ethernet Router HS Code 8537101190 Product Origin USA Condition Brand New Lead Time In Stock MOQ 1 Discontinued Status Active Key Features The 330500-04-00 sensor uses solid-state electronics to eliminate mechanical wear and ensure long-term stability. It delivers vibration data at 100 Hz under standard conditions of +20°C to +30°C. The sensor supports vertical, horizontal, or angled mounting for flexible installation. Lightweight at 0.06 kg, it integrates easily into existing monitoring systems. Measures vibration on bearing housings, casings, and structural components with high accuracy.
$200.00 $100.00
-
Bently Nevada Bently Nevada 330101‑00‑37‑05‑02‑05 | 3300 XL Series | 8 mm Armored Proximity Probe
Overview The Bently Nevada 330101‑00‑37‑05‑02‑05 is a long‑distance, armored 8 mm proximity probe designed for demanding vibration and position monitoring applications. With a 37‑meter integrated armored cable, this probe is engineered for installations requiring extended routing distances while maintaining signal integrity. It is fully compatible with both 3300 XL and legacy 3300 transducer systems, ensuring seamless integration into existing machinery protection architectures. Key Characteristics 8 mm eddy‑current probe with extended 37 m armored cable Designed for long‑distance signal transmission in harsh industrial environments TipLoc molding technology for enhanced probe‑tip durability CableLoc reinforcement providing 330 N pull strength Compatible with XL and non‑XL 3300 5 mm / 8 mm components Optional FluidLoc cable construction available for oil‑rich environments Suitable for high‑vibration and high‑temperature machinery applications Technical Specifications Parameter Specification Model / Part Number 330101‑00‑37‑05‑02‑05 Probe Type 3300 XL 8 mm Proximity Probe Cable Length 37 m (armored) Cable Protection Armored; optional FluidLoc oil‑resistant design Connector Type Miniature coaxial ClickLoc Mounting Pattern Standard 4‑hole pattern (with mounting base) Probe Technologies TipLoc molded tip, CableLoc reinforced cable Measurement Principle Eddy‑current displacement Interchangeability XL and non‑XL 3300 5 mm / 8 mm systems Weight 0.06 kg Dimensions 1.8 × 1.6 × 123 cm System Compatibility 3300 XL Proximity Transducer System Condition Brand New Origin USA MOQ 1 HS Code 8537101190 Functional Description The 330101‑00‑37‑05‑02‑05 probe is engineered for installations where long cable runs are required, such as large machinery skids, remote bearing housings, or equipment with complex routing paths. Its armored cable construction provides mechanical protection against abrasion, vibration, and physical impact. The probe incorporates two key Bently Nevada technologies: TipLoc – A molded probe‑tip design that ensures a strong, permanent bond between the tip and probe body. CableLoc – A high‑strength cable retention system capable of withstanding 330 N of pull force. These features significantly improve durability and reliability in harsh industrial environments. The probe is fully interchangeable with both XL and non‑XL 3300 components, eliminating the need for matched sets or bench calibration. Optional FluidLoc cable construction prevents oil migration through the cable, making it suitable for lubrication‑rich environments such as turbines and compressors. Application Scenarios Large rotating machinery requiring long cable routing Steam and gas turbines Centrifugal compressors Gearboxes and industrial pumps Machinery protection systems in oil & gas, power generation, and heavy manufacturing FAQ Q: Can this probe be used with older 3300 systems? A: Yes. It is fully compatible with both XL and non‑XL 3300 5 mm and 8 mm components. Q: Is the silicone tape suitable for oil‑exposed environments? A: No. Silicone tape is included for general protection but is not recommended for turbine‑oil environments. FluidLoc cable is preferred in such cases. Q: What makes this probe suitable for long‑distance installations? A: Its 37‑meter armored cable maintains signal integrity and provides mechanical protection over extended routing paths.
$200.00 $100.00
-
Bently Nevada Bently Nevada 330103‑00‑05‑10‑02‑05 | 3300 XL Series | 8 mm Proximity Probe
Overview The Bently Nevada 330103‑00‑05‑10‑02‑05 proximity probe is part of the 3300 XL 8 mm transducer system, engineered for precise shaft vibration and position measurement in fluid‑film bearing machinery. Its durable mechanical construction, stable electrical characteristics, and compatibility with global 3300 XL components make it a reliable choice for continuous machinery protection applications. Key Characteristics 8 mm eddy‑current probe for displacement and vibration monitoring M10 × 1 threaded stainless‑steel housing 1.0‑meter integrated coaxial cable Miniature ClickLoc connector for secure, vibration‑resistant connections Gold‑plated connector contacts for corrosion resistance Fully compatible with 3300 XL extension cables and Proximitor sensors Meets CSA, ATEX, and IECEx hazardous‑area certifications Suitable for high‑temperature, high‑vibration industrial environments Technical Specifications Parameter Specification Model / Part Number 330103‑00‑05‑10‑02‑05 Probe Type 3300 XL 8 mm Proximity Probe Thread Size M10 × 1 Cable Length 1.0 m (3.3 ft) Cable Type Unarmored coaxial cable Connector Type Miniature coaxial ClickLoc Measurement Principle Eddy‑current displacement Output Voltage proportional to probe‑target gap Certifications CSA, ATEX, IECEx Weight 0.06 kg Dimensions 1.8 × 1.6 × 123 cm System Compatibility 3300 XL Proximity Transducer System Condition Brand New Origin USA MOQ 1 HS Code 8537101190 Functional Description The 330103‑00‑05‑10‑02‑05 probe is designed to deliver accurate displacement and vibration measurements for rotating machinery. Its M10 × 1 threaded housing supports secure installation, while the ClickLoc connector ensures a reliable electrical interface that resists loosening under vibration. The probe’s sensing element produces a voltage proportional to the distance between the probe tip and the conductive target surface, enabling precise monitoring of: Shaft radial vibration Axial position Thermal growth Keyphasor phase reference Gold‑plated connector contacts enhance corrosion resistance, ensuring long‑term signal integrity. The probe is lightweight and easy to install, making it suitable for both new installations and system upgrades. Application Scenarios Steam and gas turbines Centrifugal compressors Industrial pumps and fans Gearboxes and generators Machinery requiring compact 8 mm probe installation FAQ Q: Does this probe require a specific Proximitor sensor? Yes. It is designed for use with 3300 XL Proximitor sensors for optimal performance. Q: Can this probe be used in hazardous environments? Yes. It meets CSA, ATEX, and IECEx certifications. Q: Is the connector resistant to vibration? The ClickLoc connector includes a locking mechanism that prevents loosening during operation.
$200.00 $100.00
-
Bently Nevada Bently Nevada 330930‑060‑04‑05 | 3300 NSv Series | Extension Cable
Overview The Bently Nevada 330930‑060‑04‑05 extension cable is part of the 3300 NSv (Narrow Side‑View) Proximity Transducer System, engineered for machinery where limited mounting space or small shaft diameters prevent the use of standard 5 mm or 8 mm probes. This 6‑meter armored cable ensures stable, noise‑resistant signal transmission between NSv proximity probes and Proximitor sensors, supporting accurate vibration and position monitoring in demanding industrial environments. Key Characteristics 6.0‑meter extension cable designed specifically for 3300 NSv systems Stainless‑steel armored construction with FEP jacket for chemical and mechanical protection Gold‑plated brass ClickLoc connectors for secure, vibration‑resistant mating CableLoc retention system rated to 220 N pull strength Suitable for compact machinery and small‑target applications Backward‑compatible with earlier 3300 RAM probe systems Supports radial vibration, axial position, and small‑target displacement measurements Technical Specifications Parameter Specification Model / Part Number 330930‑060‑04‑05 Product Type 3300 NSv Extension Cable Cable Length 6.0 m (19.7 ft) Armor Stainless steel Jacket Material FEP Connector Type Gold‑plated ClickLoc Cable Retention CableLoc, 220 N pull strength System Compatibility 3300 NSv Proximity Transducer System Weight 0.55 kg Dimensions 20.5 × 22.4 × 3.3 cm Condition Brand New Origin USA MOQ 1 HS Code 8537101190 Functional Description The 330930‑060‑04‑05 cable is engineered to maintain high‑quality signal transmission in installations requiring precise alignment between probe and Proximitor sensor. Its stainless‑steel armor and FEP jacket provide strong resistance to chemicals, abrasion, and mechanical stress, making it suitable for compressors, refrigeration systems, and process gas machinery. The ClickLoc connector design ensures a secure, slip‑resistant connection that withstands vibration and thermal cycling. The CableLoc retention system reinforces the mechanical bond between the cable and probe assembly, supporting up to 220 N of pull force. This cable is optimized for the 3300 NSv system, which is used when standard 5 mm or 8 mm probes cannot be installed due to space limitations or small shaft diameters. It is also compatible with earlier 3300 RAM probe systems, offering flexibility for system upgrades and mixed installations. Application Scenarios Centrifugal compressors Refrigeration compressors Process gas compressors Machinery with limited mounting space Small‑diameter shaft vibration monitoring Chemical and high‑vibration industrial environments FAQ Q: Can this cable be used with standard 3300 XL 5 mm or 8 mm probes No. It is designed specifically for the 3300 NSv system, which uses different electrical characteristics. Q: Is the cable suitable for corrosive or chemical environments Yes. The FEP jacket and stainless‑steel armor provide strong chemical resistance. Q: Does this cable support older 3300 RAM probes Yes. It is backward‑compatible with earlier RAM probe and cable assemblies.
$200.00 $100.00
-
Bently Nevada Bently Nevada 330101‑00‑41‑15‑12‑05 | 3300 XL Series | 8 mm Proximity Probe
Overview The Bently Nevada 330101‑00‑41‑15‑12‑05 proximity probe is part of the 3300 XL 8 mm transducer system, engineered for high‑accuracy shaft vibration and position measurement in fluid‑film bearing machinery. Designed to meet API 670 (4th Edition) requirements, this probe delivers stable, linear, and repeatable performance in demanding industrial environments. Key Characteristics 8 mm eddy‑current probe for displacement and vibration monitoring Fully compliant with API 670 mechanical and performance criteria Suitable for static position, dynamic vibration, Keyphasor, and speed measurement Interchangeable with all 3300 XL extension cables and Proximitor sensors Backward‑compatible with legacy 3300 5 mm and 8 mm components FluidLoc cable construction for oil‑resistant performance Miniature ClickLoc connector for secure, vibration‑resistant mating Certified for hazardous‑area use (CSA, ATEX, IECEx) Technical Specifications Parameter Specification Model / Part Number 330101‑00‑41‑15‑12‑05 Probe Type 3300 XL 8 mm Proximity Probe Thread Size 3/8‑24 UNF Case Length 1.5 m Cable Length 1.2 m Cable Type FluidLoc oil‑resistant cable Connector Type Miniature coaxial ClickLoc Measurement Principle Eddy‑current displacement Output Voltage proportional to probe‑target gap Certifications CSA, ATEX, IECEx Weight 0.06 kg Dimensions 1.8 × 1.6 × 123 cm System Compatibility 3300 XL Proximity Transducer System Condition Brand New Origin USA MOQ 1 HS Code 8537101190 Functional Description The 330101‑00‑41‑15‑12‑05 probe is engineered to provide accurate displacement and vibration measurements across a wide operating range. Its sensing element produces a voltage proportional to the distance between the probe tip and the conductive target surface, enabling precise monitoring of shaft behavior in rotating machinery. The probe’s FluidLoc cable prevents oil migration through the cable interior, improving long‑term reliability in lubrication‑rich environments. The ClickLoc connector ensures a secure electrical interface that resists loosening under vibration, while maintaining low contact resistance. As part of the 3300 XL system, the probe is fully interchangeable with extension cables and Proximitor sensors, eliminating the need for matched components or field calibration. Its backward compatibility with earlier 3300 series components simplifies system upgrades and mixed installations. Application Scenarios Steam and gas turbines Centrifugal compressors Industrial pumps and fans Gearboxes and generators Machinery requiring API 670‑compliant monitoring FAQ Q: Is this probe compatible with older 3300 series components Yes. It is fully backward‑compatible with non‑XL 5 mm and 8 mm probes, cables, and sensors. Q: What advantage does FluidLoc cable provide It prevents oil migration through the cable, improving reliability in lubrication‑rich environments. Q: Does this probe require matched calibration with its extension cable No. All 3300 XL components are factory‑calibrated for interchangeability.
$200.00 $100.00
-
Bently Nevada Bently Nevada 330103‑00‑03‑05‑02‑05 3300 XL Proximitor Probe
Overview The Bently Nevada 330103‑00‑03‑05‑02‑05 proximitor probe is a compact 5 mm sensor designed for installations where standard 8 mm probes cannot be accommodated. As part of the 3300 XL proximity transducer system, it provides precise non‑contact measurement of shaft vibration and displacement in confined mounting locations. Design and Construction This probe features a short 30 mm case length and an unthreaded configuration, enabling installation in narrow side‑view or restricted‑access areas without compromising measurement accuracy. Its 0.5‑meter molded cable is terminated with a miniature coaxial ClickLoc connector, ensuring a secure, vibration‑resistant connection and maintaining shielding integrity. The 330103‑00‑03‑05‑02‑05 is engineered to deliver stable performance when paired with compatible extension cables and Proximitor sensors, forming a complete measurement chain suitable for high‑speed rotating machinery. Technical Specifications Parameter Specification Model 330103‑00‑03‑05‑02‑05 Probe Type 3300 XL 5 mm Proximitor Probe Case Length 30 mm Unthreaded Length 0 mm Cable Length 0.5 m Connector Miniature coaxial ClickLoc Measurement Type Static position and dynamic vibration System Compatibility 3300 Proximity Transducer System Weight 0.06 kg Dimensions 1.8 × 1.6 × 123 cm HS Code 8537101190 Origin USA Minimum Order 1 unit Product Status Active System TSI Performance Characteristics The probe generates a voltage output proportional to the distance between the probe tip and the target surface, enabling accurate gap and vibration measurements. Its compact geometry allows installation in tight spaces without reducing side‑view clearance or tip‑to‑tip spacing. The ClickLoc connector design supports rapid installation and minimizes downtime during maintenance, while the probe’s lightweight construction ensures ease of handling during system integration. Application Scenarios Machinery with limited mounting space Side‑view installations requiring compact probe geometry Turbine, compressor, and pump vibration monitoring Shaft displacement and axial position measurement Predictive maintenance and protection systems using 3300 XL components FAQ Q: Why choose a 5 mm probe instead of an 8 mm version The 5 mm design fits installations where space constraints prevent the use of standard 8 mm probes. Q: Is this probe compatible with standard 3300 XL extension cables Yes. It integrates seamlessly with the full 3300 XL transducer system. Q: Does the ClickLoc connector improve reliability Yes. It prevents accidental loosening and maintains shielding integrity in high‑vibration environments.
$200.00 $100.00
-
Bently Nevada Bently Nevada 330904-00-10-05-02-05 3300 NSv Proximity Probes
Overview The Bently Nevada 330904‑00‑10‑05‑02‑05 is a 0.5‑meter extension cable designed for use with the 3300 NSv proximity transducer system. Its compact length, rugged construction, and high‑integrity connectors make it suitable for installations where space is limited and signal reliability is critical. Design and Construction This cable uses gold‑plated brass ClickLoc connectors engineered to maintain secure mechanical engagement even in high‑vibration environments. The miniature coaxial design preserves signal fidelity across the full operating range of NSv probes, supporting accurate displacement and vibration measurements. The 330904‑00‑10‑05‑02‑05 is compatible with both armored and unarmored NSv probe configurations, including M8×1, M10×1, 1/4‑28, and 3/8‑24 threaded probe types. Its CableLoc retention system provides up to 220 N (50 lb) of pull strength, ensuring cable integrity in demanding industrial applications. Technical Specifications Parameter Specification Model 330904‑00‑10‑05‑02‑05 Cable Type 3300 NSv Extension Cable Length 0.5 m Connector Type Gold‑plated ClickLoc miniature coaxial Pull Strength 220 N (50 lb) Probe Compatibility NSv probes (armored/unarmored) Thread Compatibility M8×1, M10×1, 1/4‑28, 3/8‑24 Certifications CSA, ATEX, IECEx Weight 0.14 kg Dimensions 20.5 × 22.5 × 3.5 cm HS Code 8537101190 Origin USA Minimum Order 1 unit Product Status Active System TSI Performance Characteristics The cable maintains excellent electrical shielding and mechanical robustness, ensuring stable signal transmission in chemically aggressive or high‑vibration environments. When paired with NSv probes, it supports improved side‑view measurement characteristics, making it suitable for installations where direct axial access is limited. Bently Nevada recommends using connector protectors in wet or corrosive environments to prevent moisture ingress and maintain long‑term signal integrity. Application Scenarios Process compressors with limited installation space Machinery requiring reverse‑mount or side‑view probe configurations Hazardous‑area monitoring systems requiring certified components High‑vibration environments where cable retention strength is critical Chemical processing equipment exposed to corrosive atmospheres FAQ Q: Is this cable compatible with all NSv probe types Yes. It supports both armored and unarmored NSv probes across multiple thread configurations. Q: What makes the CableLoc design important It provides high pull‑strength retention, preventing accidental disconnection in high‑vibration environments. Q: Can this cable be used in hazardous areas Yes. It carries CSA, ATEX, and IECEx certifications for global hazardous‑area compliance.
$200.00 $100.00
-
Bently Nevada Bently Nevada 330103‑00‑05‑10‑02‑CN 3300 XL Proximity Probe
Overview The Bently Nevada 330103‑00‑05‑10‑02‑CN proximity probe is part of the 3300 XL 8 mm transducer family and is engineered for precise non‑contact measurement of shaft vibration and displacement. This model features a short 0.5‑meter cable configuration and is tailored for installations requiring compact probe assemblies, particularly in applications with limited mounting space. Design and Construction This probe uses an M10×1 threaded body and incorporates a 50 mm case length, making it suitable for confined installation areas. The cable is factory‑molded and terminated with a gold‑plated ClickLoc miniature coaxial connector, providing a secure, vibration‑resistant connection and maintaining shielding integrity. The 330103‑00‑05‑10‑02‑CN is designed to operate as part of the complete 3300 XL transducer system, working with compatible extension cables and Proximitor sensors to deliver accurate static and dynamic measurements. Technical Specifications Parameter Specification Model 330103‑00‑05‑10‑02‑CN Probe Type 3300 XL 8 mm Proximity Probe Thread Type M10×1 Case Length 50 mm Cable Length 0.5 m Connector Gold‑plated miniature coaxial ClickLoc Measurement Type Static position and dynamic vibration Certifications CSA, ATEX, IECEx Compliance API 670 System Compatibility 3300 XL Proximity Transducer System Weight 0.14 kg Dimensions 20.5 × 22.5 × 3.5 cm HS Code 8537101190 Origin USA Minimum Order 1 unit Product Status Active System TSI Performance Characteristics The probe generates a voltage output proportional to the distance between the probe tip and the target surface, enabling accurate gap and vibration measurements. Its compact design supports installations in restricted spaces while maintaining the durability and performance expected from the 3300 XL series. The 330103‑00‑05‑10‑02‑CN meets API 670 requirements and is certified for hazardous‑area use, making it suitable for critical applications in power generation, petrochemical processing, and heavy industrial environments. Application Scenarios Turbine and compressor vibration monitoring Shaft displacement and axial position measurement Keyphasor reference signal acquisition Speed measurement on rotating machinery Installations requiring short‑cable probe configurations FAQ Q: What makes this model suitable for compact installations Its 50 mm case length and 0.5 m cable allow mounting in tight spaces without compromising measurement accuracy. Q: Is this probe compatible with standard 3300 XL extension cables Yes. It is designed to operate with the full 3300 XL transducer system. Q: Does this model meet hazardous‑area requirements It carries CSA, ATEX, and IECEx approvals for use in classified environments.
$200.00 $100.00
-
Bently Nevada Bently Nevada 330104‑00‑22‑10‑02‑CN 3300 XL Proximity Probe
Overview The Bently Nevada 330104‑00‑22‑10‑02‑CN proximity probe is part of the 3300 XL 8 mm transducer series, engineered for precise non‑contact measurement of shaft vibration and displacement in high‑performance rotating machinery. Its armored construction and extended mechanical dimensions make it suitable for installations exposed to harsh operating conditions and elevated mechanical stress. Design and Construction This probe features an M10×1 threaded body with a long armored case section, providing enhanced protection against physical damage and cable fatigue. The minimum case length of 220 mm supports flexible mounting arrangements, particularly in large machinery where extended reach is required. A 1.0‑meter molded cable is terminated with a miniature coaxial ClickLoc connector, ensuring a secure, vibration‑resistant connection. The ClickLoc mechanism prevents accidental loosening and maintains shielding integrity, supporting stable signal transmission to the Proximitor sensor. System Integration The 330104‑00‑22‑10‑02‑CN is designed for seamless operation with the 3300 XL Proximitor Sensor. The sensor’s mechanical packaging supports both DIN‑rail and panel‑mount installations and maintains the same 4‑hole mounting footprint as earlier generations, simplifying system upgrades. The probe’s mounting base provides built‑in electrical isolation, eliminating the need for additional isolator plates and reducing installation complexity. Technical Specifications Parameter Specification Model 330104‑00‑22‑10‑02‑CN Probe Type 3300 XL 8 mm Proximity Probe Thread Type M10×1 Minimum Case Length 220 mm Cable Length 1.0 m Connector Miniature coaxial ClickLoc Measurement Type Static position and dynamic vibration RFI/EMI Immunity CE‑compliant, suitable for non‑metallic housings System Compatibility 3300 XL Proximity Transducer System Weight 0.55 kg Dimensions 20.5 × 22.4 × 3.3 cm HS Code 8537101190 Origin USA Minimum Order 1 unit Product Status Active System TSI Performance Characteristics The probe and its associated Proximitor sensor offer improved RFI/EMI immunity, allowing installation in fiberglass or other non‑metallic housings without requiring shielded conduit or metallic enclosures. This reduces installation cost while maintaining measurement accuracy. Full interchangeability across probes, cables, and sensors simplifies maintenance and eliminates the need for matched calibration. The armored design provides additional protection in high‑vibration or mechanically exposed environments. Application Scenarios Turbine and compressor vibration monitoring Shaft displacement and axial position measurement High‑vibration environments requiring armored probe assemblies Installations requiring CE‑compliant RFI/EMI performance Machinery protection systems using 3300 XL transducer components FAQ Q: Can this probe be installed in non‑metallic housings? A: Yes. Its enhanced RFI/EMI immunity allows installation in fiberglass housings without signal degradation. Q: Does the probe require a specific Proximitor sensor? A: It is designed for use with 3300 XL Proximitor sensors for optimal accuracy and linearity. Q: Is the probe interchangeable with older 3300 series components? A: Yes. The 3300 XL platform supports full interchangeability without matched calibration.
$200.00 $100.00
You have seen 528 out of 607 products