1 in stock
Delivery within 48 hours, pay afterwards
Mid weeks Monday to friday we offer next day delivery if the product is on stock and exceptions on holidays.
Weekends We offer no deliveries in the weekends.
International Depending on where you’re located, we offer next day delivery. Check your status on this link
Description
The Triconex 4507 is a high-performance Highway Interface Module (HIM) designed to facilitate secure and deterministic communication between the Tricon safety system and external peer or distributed control networks. This module is engineered for critical industrial applications where high-speed, reliable data exchange is essential for real-time monitoring and safety-critical control.
Features
High-Speed Data Exchange: Executes rapid communication tasks to support real-time process monitoring.
Dedicated Processing: Features onboard communication processors to offload networking overhead from the main Tricon processors, ensuring consistent system scan times.
Network Isolation: Provides physical layer isolation to protect the internal safety bus from external electrical surges and noise.
Fault Tolerance: Designed to maintain independent transmit and receive paths, preventing packet collisions and ensuring data integrity.
Applications
The 4507 Highway Interface Module is widely utilized in safety-instrumented systems (SIS) within high-hazard industrial environments, including:
Oil and gas refining and petrochemical processing.
Thermal and nuclear power generation facilities.
Large-scale chemical processing plants.
Mining and heavy material handling operations.
Technical Specifications
Brand
Triconex
Model
4507
Module Type
Highway Interface Module
Operating Temperature
0 to 60 deg C
Installation Guidelines
ESD Precautions: Always use a grounded wrist strap when handling the module to prevent electrostatic discharge damage to internal circuitry.
System Power: Ensure the Tricon system is powered down or follow site-specific hot-swap procedures if supported by the chassis configuration before inserting or removing the module.
Slot Alignment: Carefully align the module with the chassis guide rails to ensure proper seating of the backplane connectors.
Cable Routing: Route communication cables away from high-voltage power lines and sources of electromagnetic interference (EMI) to maintain signal integrity.
Grounding: Ensure the chassis is properly bonded to a clean earth ground to maintain the effectiveness of the module's isolation barriers.
FAQ
What is the primary function of the Triconex 4507?
The 4507 acts as a bridge between the Tricon safety system and external networks, allowing the safety controller to exchange data with distributed control systems (DCS) or other peer devices without compromising the integrity of the safety bus.
Can this module be used in hot-swap scenarios?
The ability to hot-swap depends on the specific Tricon chassis configuration and system firmware. Please refer to your specific Triconex system manual for site-specific maintenance procedures.
1 in stock
Delivery within 48 hours, pay afterwards
Mid weeks Monday to friday we offer next day delivery if the product is on stock and exceptions on holidays.
Weekends We offer no deliveries in the weekends.
International Depending on where you’re located, we offer next day delivery. Check your status on this link
5 in stock
Delivery within 48 hours, pay afterwards
Mid weeks Monday to friday we offer next day delivery if the product is on stock and exceptions on holidays.
Weekends We offer no deliveries in the weekends.
International Depending on where you’re located, we offer next day delivery. Check your status on this link
DescriptionThe Triconex 2351 baseplate is a foundational hardware component designed for Triple Modular Redundancy (TMR) safety-instrumented systems. It provides the necessary mechanical mounting and electrical backplane connectivity for high-availability I/O modules. This baseplate is engineered to support critical emergency shutdown (ESD) and fire and gas (F&G) applications, ensuring reliable power distribution and redundant communication bus routing in demanding industrial environments such as oil refineries, chemical processing plants, and power generation facilities.Features
Supports redundant TMR communication bus architecture for fault-tolerant operation.
Integrated dual-redundant 24 VDC power rails for enhanced system reliability.
Mechanical keying system to prevent incorrect module insertion and ensure slot configuration integrity.
Multi-layered PCB design to maintain signal integrity and prevent cross-talk.
Dedicated ground planes for effective electromagnetic interference (EMI) mitigation.
Robust construction designed to minimize vibration and support heavy field wiring loads.
ApplicationsThe 2351 baseplate is specifically designed for use within Triconex TMR safety systems. It is widely deployed in safety-critical environments where high availability and fault tolerance are mandatory, including:
Emergency Shutdown (ESD) Systems
Fire and Gas (F&G) Monitoring
Process Control and Safety Instrumented Systems (SIS)
High-availability industrial automation environments
Technical Specifications
Model
2351
Brand
Triconex
Product Type
Baseplate
Slot Capacity
2 Slots
Input Voltage
24 VDC nominal
Max Bus Current
15 A per power rail
Operating Temperature
0 to +60 deg C
Installation Guidelines
Ensure the baseplate is mounted on a clean, rigid surface or standard industrial DIN rail to prevent mechanical stress.
Always power down the system before inserting or removing any I/O modules from the baseplate.
Ensure proper grounding of the baseplate to the system cabinet ground plane to mitigate EMI.
Verify that the module keying matches the slot configuration before installation to avoid hardware damage.
Maintain adequate clearance around the baseplate to ensure proper airflow and cooling within the cabinet.
Route signal and power cables separately to minimize potential interference.
FAQIs the 2351 baseplate hot-swappable?Yes, the 2351 baseplate is designed to support hot-swapping of I/O modules, allowing for maintenance and replacement without requiring a full system shutdown.What is the primary function of the redundant power rails?The dual-redundant power rails provide fault tolerance; if one power source fails, the system continues to operate on the secondary rail, preventing a single point of failure.
5 in stock
Delivery within 48 hours, pay afterwards
Mid weeks Monday to friday we offer next day delivery if the product is on stock and exceptions on holidays.
Weekends We offer no deliveries in the weekends.
International Depending on where you’re located, we offer next day delivery. Check your status on this link
1 in stock
Delivery within 48 hours, pay afterwards
Mid weeks Monday to friday we offer next day delivery if the product is on stock and exceptions on holidays.
Weekends We offer no deliveries in the weekends.
International Depending on where you’re located, we offer next day delivery. Check your status on this link
Description
The Schneider Modicon Quantum 140NOE77110 is a high-performance Ethernet communication module engineered for the Modicon Quantum automation platform. This module provides robust connectivity to Ethernet TCP/IP networks, supporting industry-standard protocols such as Modbus TCP and EtherNet/IP. It acts as a critical interface for integrating PLC systems with supervisory control systems, HMIs, and field devices. Designed for demanding industrial environments including power generation, oil and gas, and mining, the 140NOE77110 features an embedded web server that facilitates remote diagnostics, configuration, and real-time monitoring of process variables, effectively reducing troubleshooting time and minimizing system downtime.
Features
Dedicated processor for high-traffic network management, ensuring no impact on CPU scan time.
10/100 Mbps RJ45 port with auto-negotiation and auto-MDIX capabilities.
Supports advanced networking functions including I/O scanning, Global Data, and NTP time synchronization.
Integrated SNMP, BootP, and DHCP for simplified network management and automated IP addressing.
Embedded Class B30 web server for remote system access and diagnostics.
Flash memory upgradeable to support evolving communication standards.
Applications
The 140NOE77110 is suitable for complex distributed control architectures requiring high-speed data exchange. Typical applications include SCADA system integration, peer-to-peer PLC communication, and remote plant-floor data acquisition in heavy industrial settings.
Technical Specifications
Model
140NOE77110
Brand
Schneider Electric
Module Type
Ethernet TCP/IP Communication Module
Transmission Rate
10/100 Mbps
Communication Port
1 x RJ45
Protocols Supported
Modbus TCP, EtherNet/IP, SNMP, HTTP, FTP, TFTP, DHCP/BootP
Web Server
Embedded (Class B30)
Power Consumption
750 mA at 5 VDC (Internal)
Operating Temperature
0 to 60 deg C
Storage Temperature
-40 to +85 deg C
Relative Humidity
0 to 95% (Noncondensing)
Installation Guidelines
Ensure the Quantum rack is powered down before inserting or removing the communication module to prevent electrical damage.
Seat the module firmly into the designated slot on the Quantum backplane and secure the locking mechanism.
Use shielded Category 5e or 6 Ethernet cabling to minimize EMI interference in industrial environments.
Ensure proper grounding of the control cabinet to maintain signal integrity.
Verify that the module's IP address and network settings are configured correctly via the web server or software tools before full system integration.
Compliance and Certifications
The 140NOE77110 meets various international standards, including UL, CSA, CE, FM Class I Div 2, and ATEX, making it suitable for use in hazardous location environments where specified.
FAQ
Does this module require external power?No, the 140NOE77110 draws its power directly from the Quantum backplane (750 mA at 5 VDC).
Can this module be used for peer-to-peer communication?Yes, the module is designed to support peer-to-peer communication between Modicon Quantum controllers as well as connectivity to third-party SCADA and HMI systems.
1 in stock
Delivery within 48 hours, pay afterwards
Mid weeks Monday to friday we offer next day delivery if the product is on stock and exceptions on holidays.
Weekends We offer no deliveries in the weekends.
International Depending on where you’re located, we offer next day delivery. Check your status on this link
6 in stock
Delivery within 48 hours, pay afterwards
Mid weeks Monday to friday we offer next day delivery if the product is on stock and exceptions on holidays.
Weekends We offer no deliveries in the weekends.
International Depending on where you’re located, we offer next day delivery. Check your status on this link
DescriptionThe Triconex 3614E is a high-reliability Supervised Digital Output (SDO) module designed for use within the Tricon Triple Modular Redundancy (TMR) safety system. This module is essential for driving critical final control elements in demanding industrial environments, such as oil and gas refineries, chemical processing plants, and power generation facilities. The 3614E continuously monitors the integrity of field wiring and the health of the connected load, detecting open or short circuits even when the output is in the off state. By providing comprehensive diagnostic coverage and hardware fault tolerance, the 3614E helps prevent spurious trips and ensures the safety loop remains operational, minimizing process downtime.Features
TMR (Triple Modular Redundancy) architecture for high fault tolerance and reliability.
16 supervised output channels for comprehensive field device monitoring.
Continuous health monitoring of field wiring, including detection of open and short circuits.
Low-level current pulse injection for non-intrusive circuit continuity verification.
Integrated over-current and thermal overload protection.
Real-time diagnostic reporting to Main Processors (MPs) for immediate fault identification.
ApplicationsThe 3614E is designed for safety-critical applications where high availability and diagnostic feedback are required, including:
Emergency Shutdown Systems (ESD).
Fire and Gas (F&G) detection systems.
Burner Management Systems (BMS).
Critical process control loops requiring SIL-rated output supervision.
Technical Specifications
Model
3614E
Brand
Triconex
Output Channels
16 points, supervised
Rated Voltage
24 VDC
Current Rating
2.0 A per point (maximum)
Leakage Current
4.0 mA (maximum)
Operating Temperature
0 to 60 deg C
Installation Guidelines
Ensure the Tricon system is powered down before inserting or removing the 3614E module from the chassis.
Handle the module using proper ESD (Electrostatic Discharge) precautions to prevent damage to internal circuitry.
Verify that field wiring is correctly terminated to the corresponding terminal blocks to ensure accurate supervision and diagnostic feedback.
Ensure adequate ventilation within the cabinet to maintain the operating temperature between 0 and 60 deg C.
Route field signal cables away from high-voltage power lines and sources of electromagnetic interference (EMI) to maintain signal integrity.
FAQWhat does the "Supervised" designation mean for the 3614E?The supervised designation indicates that the module performs active diagnostics on the field circuit. It can detect faults such as open circuits or short circuits in the wiring to the final control element, even when the output is commanded to be off, ensuring the system is always aware of the health of the safety loop.Is the 3614E compatible with all Tricon systems?The 3614E is designed for the Tricon TMR safety system. Please refer to your specific Tricon system documentation or hardware revision compatibility matrix to ensure the module version matches your existing processor and chassis configuration.
6 in stock
Delivery within 48 hours, pay afterwards
Mid weeks Monday to friday we offer next day delivery if the product is on stock and exceptions on holidays.
Weekends We offer no deliveries in the weekends.
International Depending on where you’re located, we offer next day delivery. Check your status on this link
DescriptionThe Triconex 4107 EICM (Enhanced Intelligent Communication Module) is a specialized interface module designed for the Tricon Safety Instrumented System (SIS). It serves as a high-performance communication gateway, enabling the Tricon controller to exchange data reliably and deterministically with external systems such as Distributed Control Systems (DCS), Supervisory Control and Data Acquisition (SCADA) platforms, and other third-party industrial devices. By offloading communication tasks from the main processors, the 4107 EICM ensures that critical safety functions remain the primary priority of the system while maintaining high-speed data throughput.Features
Supports multiple communication protocols, including Modbus (Master and Slave) and Honeywell TDC 3000 interfaces.
Features independent serial ports to facilitate redundant communication paths, enhancing system availability.
Onboard intelligence manages physical layer signaling and data link framing, reducing processor overhead.
Designed for high-integrity safety applications in demanding environments like oil, gas, and power generation.
Provides transparent diagnostic visibility for external monitoring and control systems.
ApplicationsThe 4107 EICM is primarily deployed in safety-critical industrial automation environments where high-speed, reliable data integration is required. Typical applications include integration with DCS platforms for process monitoring, connection to third-party HMI systems, and data logging in safety-instrumented loops within refineries, chemical processing plants, and power generation facilities.Technical Specifications
Brand
Triconex
Model
4107 EICM
Module Type
Enhanced Intelligent Communication Module
Input Voltage
24 VDC
Operating Temperature
0 to 60 deg C
Installation Guidelines
Ensure the Tricon system is powered down before inserting or removing the 4107 EICM module to prevent electrical damage or system faults.
Handle the module using proper ESD (Electrostatic Discharge) protection practices to avoid damaging sensitive internal components.
Ensure the module is fully seated in the designated Tricon chassis slot and that the locking mechanisms are secure.
Verify that all serial communication cables are properly shielded and routed away from high-voltage power lines to minimize electromagnetic interference (EMI).
Consult the specific Tricon system documentation for wiring pinouts and configuration requirements for the intended protocol (Modbus or Honeywell TDC 3000).
FAQIs the 4107 EICM compatible with all Tricon systems?The 4107 EICM is designed for use within the Tricon SIS platform. Compatibility depends on the specific system revision and firmware version. Always verify your system's hardware compatibility list before installation.Does this module support redundant configurations?Yes, the 4107 EICM is designed to support redundant hardware configurations, allowing for high-availability communication paths essential for safety-critical applications.
2 in stock
Delivery within 48 hours, pay afterwards
Mid weeks Monday to friday we offer next day delivery if the product is on stock and exceptions on holidays.
Weekends We offer no deliveries in the weekends.
International Depending on where you’re located, we offer next day delivery. Check your status on this link
DescriptionThe Triconex 3002 is a specialized Pulse Input Terminal Board engineered for integration within Triconex Triple Modular Redundancy (TMR) safety systems. This terminal board acts as the critical physical interface for high-speed pulse signals, commonly utilized in turbine speed monitoring, flow metering, and rotational equipment diagnostics. It is designed for mission-critical industrial environments, including power generation, oil and gas refineries, and mining operations, where signal integrity is paramount for maintaining SIL 3 functional safety standards.Features
Supports 8 high-speed pulse input channels for versatile field connectivity.
Designed for compatibility with magnetic pickups and active proximity sensors.
Features integrated surge protection and isolation circuitry to safeguard processor modules from field-side electrical transients.
Supports redundant cabling configurations to maintain the TMR safety architecture.
Includes signal conditioning and termination resistors to ensure pulse waveform integrity at high frequencies.
ApplicationsThe 3002 terminal board is primarily deployed in safety-critical applications requiring precise rotational speed measurement and flow totalization. Typical use cases include:
Turbine overspeed protection systems.
Rotational equipment monitoring and diagnostics.
Industrial flow metering and pulse-based process control.
High-availability safety loops in petrochemical and power plants.
Technical Specifications
Model
3002
Brand
Triconex
Module Type
Pulse Input Terminal Board
Input Channels
8 High-speed Pulse
Frequency Range
1 Hz to 20,000 Hz
Operating Temperature
0 to 60 deg C
Installation Guidelines
Ensure the system is powered down before installing or removing the terminal board to prevent electrical damage or system faults.
Use shielded cabling for all field connections to minimize EMI/RFI interference, especially in high-speed pulse applications.
Ensure proper grounding of the terminal board chassis to the system common ground to maintain signal integrity and surge protection performance.
Follow standard ESD (Electrostatic Discharge) handling procedures when touching the board components.
Verify that field wiring is securely terminated to prevent intermittent signal loss, which could trigger false trips in safety-critical loops.
FAQIs the 3002 board compatible with all Triconex systems?The 3002 is designed for specific Triconex TMR safety systems. Please verify your system chassis and processor compatibility before installation to ensure it meets the requirements of your specific safety loop configuration.Does this board require external power?The 3002 serves as a terminal interface. Power requirements for field sensors (such as active proximity sensors) are typically routed through the board from the associated I/O module or external power supply. Refer to your specific system wiring diagram for power distribution details.
2 in stock
Delivery within 48 hours, pay afterwards
Mid weeks Monday to friday we offer next day delivery if the product is on stock and exceptions on holidays.
Weekends We offer no deliveries in the weekends.
International Depending on where you’re located, we offer next day delivery. Check your status on this link
DescriptionThe Foxboro P0916AE is a high-reliability Termination Assembly (TA) designed for the I/A Series 200 Series distributed control system (DCS) architecture. This terminal card acts as the essential physical interface between field-side instrumentation wiring and the Fieldbus Modules (FBMs). By providing a robust, organized connection point, the P0916AE ensures secure signal routing, simplifies maintenance procedures, and protects sensitive control electronics from field-side wiring faults. It is engineered for deployment in demanding industrial environments, including power generation, petrochemical processing, and mining operations.Features
System Integration: Designed specifically for seamless mounting within the Foxboro I/A Series 200 hardware ecosystem.
Signal Protection: Integrated circuit protection helps prevent field-side electrical faults from propagating to the FBMs.
Troubleshooting Access: Includes dedicated test points allowing for real-time circuit diagnostics without the need to disconnect field wiring.
Redundancy Support: Supports redundant cabling configurations to maintain signal continuity in critical control loops.
EMI/RFI Shielding: Facilitates effective grounding strategies to protect digital logic from electromagnetic and radio frequency interference.
ApplicationsThe P0916AE is widely utilized in industrial automation systems where high-density I/O connectivity is required. Typical applications include:
Petrochemical and refinery process control.
Power generation and distribution monitoring.
Mining and mineral processing automation.
Continuous process manufacturing where high availability is critical.
Technical Specifications
Model
P0916AE
Brand
Foxboro (Schneider Electric)
Module Type
Termination Assembly (TA)
Series
I/A Series 200
Connection Type
Screw-terminal / Compression-style
Max Input Voltage
30 VDC
Max Current Rating
2 A per point
Operating Temperature
0 to 60 deg C
Storage Temperature
-40 to 70 deg C
Relative Humidity
5 to 95 percent (non-condensing)
Installation Guidelines
ESD Precautions: Always use a grounded wrist strap when handling the module to prevent electrostatic discharge damage to internal components.
Power Status: Ensure all power to the I/O rack is disconnected before installing or removing the terminal card from the baseplate.
Wiring: Ensure all field wires are properly secured in the terminals. Verify that wire gauges are compatible with the terminal block specifications to prevent loose connections.
Grounding: Follow standard Foxboro grounding practices for the I/A Series to ensure effective shielding against EMI/RFI.
Environment: Ensure the installation location provides adequate ventilation to maintain operating temperatures within the specified 0 to 60 deg C range.
FAQWhat is the primary function of the P0916AE?The P0916AE is a Termination Assembly that provides the physical interface between field wiring and Foxboro I/A Series 200 Fieldbus Modules, facilitating signal routing and circuit protection.Can this module be used in redundant systems?Yes, the P0916AE supports redundant cabling configurations, which is essential for maintaining signal continuity in critical control loops.Is this module compatible with all I/A Series systems?The P0916AE is specifically designed for the I/A Series 200 hardware ecosystem. Always verify your specific FBM compatibility before installation.
8 in stock
Delivery within 48 hours, pay afterwards
Mid weeks Monday to friday we offer next day delivery if the product is on stock and exceptions on holidays.
Weekends We offer no deliveries in the weekends.
International Depending on where you’re located, we offer next day delivery. Check your status on this link
Description
The Foxboro FBM203 is a high-precision, 8-channel RTD (Resistance Temperature Detector) input module designed for the I/A Series distributed control system. This module provides reliable temperature sensing by interfacing directly with 2-wire, 3-wire, or 4-wire RTD sensors, as well as resistance-based inputs. It is engineered for critical process industries, including power generation, pharmaceutical manufacturing, and food and beverage processing, where stable and repeatable measurements are essential. The FBM203 features individual channel-to-channel isolation to prevent ground loops and signal cross-talk, ensuring high data integrity in electrically noisy industrial environments.
Features
High-Accuracy Sensing: Supports a wide range of RTD types, including Pt 100, Pt 200, Pt 500, Pt 1000, Ni 120, and Cu 10.
Advanced Lead Compensation: Automatically compensates for lead-wire resistance in 3-wire and 4-wire configurations to maintain accuracy over long cable runs.
Hot-Swappable Design: Allows for module replacement without powering down the baseplate, minimizing process downtime during maintenance.
Configurable Noise Rejection: Programmable integration times (50 Hz or 60 Hz) to effectively filter out AC power line interference.
Robust Diagnostics: Continuous internal self-diagnostics and hardware verification with reporting for sensor burnout or module failure.
Environmental Durability: Rated for G3 harsh environments, ensuring long-term reliability in challenging industrial conditions.
Technical Specifications
Model
FBM203
Input Channels
8 Isolated RTD / Resistance channels
Sensor Types
Pt 100, Pt 200, Pt 500, Pt 1000, Ni 120, Cu 10
Input Resistance
0 to 320 Ohms or 0 to 3200 Ohms
Accuracy
+/- 0.02 percent of span
Isolation
600 V AC channel-to-channel and channel-to-ground
Power Consumption
3 W maximum
Operating Temperature
-20 to +70 deg C
Environmental Rating
G3 Harsh Environment
Installation Guidelines
ESD Handling: Always use an anti-static wrist strap and follow proper ESD precautions when handling the module to prevent damage to internal circuitry.
Mounting: Designed for installation into the I/A Series baseplate. Ensure the module is fully seated and the locking mechanism is engaged.
Wiring: Use shielded twisted-pair cabling for field inputs to maintain signal integrity. Ensure proper grounding of cable shields at the cabinet entry point.
Power: The module supports hot-swapping; however, ensure the baseplate is properly powered and the system is in a state that allows for I/O module replacement.
Environment: While rated for G3 environments, ensure the control cabinet is kept free of excessive dust, moisture, and corrosive gases to maximize equipment lifespan.
FAQ
Q: Can the FBM203 be replaced while the system is running?A: Yes, the FBM203 is hot-swappable, allowing for replacement without powering down the baseplate or interrupting other modules in the rack.
Q: Does this module support 2-wire RTD sensors?A: Yes, the FBM203 supports 2-wire, 3-wire, and 4-wire RTD configurations.
Q: What is the purpose of the G3 rating?A: The G3 rating indicates that the module is designed to withstand harsh, corrosive industrial environments, providing higher reliability than standard commercial-grade components.
8 in stock
Delivery within 48 hours, pay afterwards
Mid weeks Monday to friday we offer next day delivery if the product is on stock and exceptions on holidays.
Weekends We offer no deliveries in the weekends.
International Depending on where you’re located, we offer next day delivery. Check your status on this link
9 in stock
Delivery within 48 hours, pay afterwards
Mid weeks Monday to friday we offer next day delivery if the product is on stock and exceptions on holidays.
Weekends We offer no deliveries in the weekends.
International Depending on where you’re located, we offer next day delivery. Check your status on this link
DescriptionThe 4000043-310 is a high-performance Triconex cable assembly engineered by Invensys for critical safety and control infrastructure. This 9-foot interconnect solution is specifically designed to facilitate robust data transmission within Triconex Triple Modular Redundant (TMR) systems. Deployed extensively in high-stakes industrial environments such as oil refineries, nuclear power plants, and chemical processing facilities, the 4000043-310 ensures high-fidelity signal integrity under rigorous operational demands. Its heavy-duty construction minimizes electromagnetic interference and physical degradation, serving as a vital link to maintain system uptime and functional safety in SIL 3 rated applications.Features
Designed for integration with Triconex TMR safety systems.
9-foot (2.74 m) length for flexible cabinet routing.
Industrial-grade shielding to mitigate electromagnetic interference (EMI).
High-density connectors providing vibration-resistant interfaces.
Factory-tested for continuity and insulation resistance to ensure system reliability.
ApplicationsThis cable assembly is primarily utilized in safety instrumented systems (SIS) and distributed control systems (DCS). It serves as the interconnect between I/O modules and field termination assemblies (FTA) in mission-critical environments, including petrochemical plants, power generation facilities, and offshore platforms where signal integrity and redundancy are paramount.Technical Specifications
Model
4000043-310
Brand
Invensys Triconex
Product Type
Cable Assembly
Length
9.0 ft (2.74 m)
Operating Temperature
0 to 60 deg C
Storage Temperature
-40 to 85 deg C
Humidity
5 to 95 percent non-condensing
Installation Guidelines
Ensure the system is powered down before connecting or disconnecting the cable assembly to prevent electrical arcing or potential damage to I/O module pins.
Route cables away from high-voltage power lines and high-EMI sources to maintain signal integrity.
Ensure connectors are fully seated and locking mechanisms are engaged to prevent accidental disconnection due to vibration.
Avoid sharp bends or excessive tension during installation to prevent damage to the internal shielding and conductors.
Handle with care to prevent contamination of connector pins; use anti-static precautions when working inside control cabinets.
FAQWhat is the primary function of the 4000043-310 cable?This cable is designed to provide a secure, high-fidelity signal path between Triconex I/O modules and termination panels within a Triple Modular Redundant (TMR) safety system.Is this cable suitable for high-vibration environments?Yes, the 4000043-310 is constructed with industrial-grade materials and robust connectors designed to maintain a reliable connection in standard industrial control cabinet environments.
9 in stock
Delivery within 48 hours, pay afterwards
Mid weeks Monday to friday we offer next day delivery if the product is on stock and exceptions on holidays.
Weekends We offer no deliveries in the weekends.
International Depending on where you’re located, we offer next day delivery. Check your status on this link
10 in stock
Delivery within 48 hours, pay afterwards
Mid weeks Monday to friday we offer next day delivery if the product is on stock and exceptions on holidays.
Weekends We offer no deliveries in the weekends.
International Depending on where you’re located, we offer next day delivery. Check your status on this link
DescriptionThe 4000042-310 is a high-precision interface cable assembly engineered for the Invensys Triconex Safety Instrumented System (SIS). This specialized conductor facilitates critical signal routing between Tricon controller modules and termination panels or peripheral hardware. Primarily utilized in high-reliability industrial sectors such as offshore oil platforms, chemical processing, and nuclear power generation, the cable ensures the integrity of safety-critical data streams. By employing industrial-grade shielding and specialized connector pinouts, it eliminates signal interference and maintains low-latency communication. Integrating this validated cable into the safety loop architecture minimizes the risk of intermittent faults, directly reducing unscheduled system downtime in complex Triple Modular Redundancy (TMR) configurations.Features
High-density shielding to protect against electromagnetic interference (EMI) and radio frequency interference (RFI).
Precision-terminated connectors ensuring a low-impedance electrical path.
Multi-core design optimized for high-speed digital and sensitive analog signal transmission.
Constructed with high-purity tinned copper conductors.
Industrial-grade flame-retardant polymer insulation.
Color-coded or numbered wiring for rapid diagnostic testing and installation.
ApplicationsThis cable is specifically designed for intra-cabinet or short-range rack-to-rack applications within Triconex safety systems where high-fidelity signal coupling is mandatory for safety loop verification and TMR module communication.Technical Specifications
Model
4000042-310
Brand
Invensys (Triconex)
Product Type
Interface Cable Assembly
Connector Type
Specialized Triconex Multi-pin Interface
Conductor Material
High-purity tinned copper
Operating Temperature
-20 to 70 deg C
Storage Temperature
-40 to 85 deg C
Insulation Rating
Industrial grade flame-retardant polymer
Installation Guidelines
Ensure the system is powered down before connecting or disconnecting the cable assembly to prevent electrical arcing or damage to module pins.
Route cables away from high-voltage power lines and heavy inductive loads to minimize potential EMI/RFI noise pickup.
Verify that all connectors are fully seated and locked into their respective ports to ensure reliable signal continuity.
Handle with care to avoid sharp bends or mechanical stress on the connector housing, which could compromise the integrity of the internal wiring.
Use appropriate cable management (cable ties or trays) to secure the cable within the cabinet, ensuring it does not obstruct airflow or cooling paths.
FAQIs this cable compatible with all Triconex systems?The 4000042-310 is designed for specific Triconex SIS configurations. Please verify your system's hardware manual or the specific pinout requirements of your termination panel before installation to ensure compatibility.What is the primary purpose of the shielding in this cable?The shielding is critical for maintaining signal integrity in high-noise industrial environments, protecting sensitive safety-critical data from EMI and RFI that could otherwise cause intermittent faults or communication errors.
10 in stock
Delivery within 48 hours, pay afterwards
Mid weeks Monday to friday we offer next day delivery if the product is on stock and exceptions on holidays.
Weekends We offer no deliveries in the weekends.
International Depending on where you’re located, we offer next day delivery. Check your status on this link
6 in stock
Delivery within 48 hours, pay afterwards
Mid weeks Monday to friday we offer next day delivery if the product is on stock and exceptions on holidays.
Weekends We offer no deliveries in the weekends.
International Depending on where you’re located, we offer next day delivery. Check your status on this link
DescriptionThe Foxboro FBM201 (P0914SQ) is a high-performance Analog Input Interface Module designed for the I/A Series distributed control system. This module features eight isolated input channels, each capable of interfacing with 0 to 20 mA DC analog signals. It is primarily utilized in heavy industrial sectors such as oil refining, chemical processing, and power generation to monitor critical variables like pressure, flow, and temperature. The FBM201 serves as a high-precision data acquisition point, converting field-side analog signals into digital data for the control processor. By providing superior signal isolation and noise rejection, it ensures the integrity of process data, which is essential for maintaining loop stability and preventing costly unscheduled system shutdowns.Hardware ArchitectureThe FBM201 incorporates eight independent input channels, each galvanically isolated from the other and from the system logic. This robust isolation prevents ground loops and protects the control system from high-voltage transients common in industrial field environments. The module utilizes a high-resolution Sigma-Delta analog-to-digital converter per channel to ensure maximum accuracy and fast data refresh rates. It communicates with the control processor via the redundant 2 Mbps HDLC Fieldbus, ensuring high availability. The module also supports software-configurable digital filtering and integration times, allowing engineers to tune the input response based on specific process requirements or environmental noise levels.Features
8 galvanically isolated analog input channels
Input range: 0 to 20 mA DC
15-bit resolution for high-precision measurement
Redundant 2 Mbps HDLC Fieldbus communication
Software-configurable digital filtering
High noise rejection for stable process control
Applications
Oil and gas refining process monitoring
Chemical and petrochemical processing plants
Power generation control systems
Water and wastewater treatment facilities
General industrial automation and data acquisition
Technical Specifications
Model
FBM201 (P0914SQ)
Brand
Foxboro (Schneider Electric)
Input Channels
8 Isolated
Input Signal Range
0 to 20 mA DC
Input Impedance
250 Ohms (Nominal)
Resolution
15 bits
Accuracy
+/- 0.03% of span
Power Consumption
3.0 Watts (Maximum)
Operating Temperature
0 to 60 deg C
Storage Temperature
-40 to 70 deg C
Relative Humidity
5 to 95% (Non-condensing)
Installation Guidelines
Ensure the control system power is disconnected before installing or removing the FBM201 module from the baseplate.
The module is designed for mounting on a standard Foxboro I/A Series baseplate; ensure proper seating to engage the backplane connector.
Use shielded twisted-pair cabling for all analog input signals to minimize electromagnetic interference (EMI).
Maintain proper grounding practices for the cable shields at the field end or the marshalling cabinet to prevent ground loops.
Ensure adequate ventilation in the cabinet to maintain ambient temperatures within the specified 0 to 60 deg C range.
Handle with ESD-safe precautions to prevent damage to internal sensitive electronic components.
FAQIs the FBM201 compatible with all I/A Series systems?The FBM201 is designed for use within the Foxboro I/A Series distributed control system. Please verify your specific system revision and baseplate compatibility before installation.Does this module require external power for the loops?The FBM201 typically interfaces with 0-20 mA loops; please refer to your specific system wiring diagram to determine if loop power is provided by the FBM or an external power supply.
6 in stock
Delivery within 48 hours, pay afterwards
Mid weeks Monday to friday we offer next day delivery if the product is on stock and exceptions on holidays.
Weekends We offer no deliveries in the weekends.
International Depending on where you’re located, we offer next day delivery. Check your status on this link
4 in stock
Delivery within 48 hours, pay afterwards
Mid weeks Monday to friday we offer next day delivery if the product is on stock and exceptions on holidays.
Weekends We offer no deliveries in the weekends.
International Depending on where you’re located, we offer next day delivery. Check your status on this link
DescriptionThe Foxboro P0916AG is a high-performance HART Communication Input Interface Module designed for the I/A Series (Intelligent Automation) system. Engineered for critical process automation in industries such as oil refining, chemical processing, and power generation, this Field Bus Module (FBM) provides eight individual input channels. It serves as a vital bridge between field devices and the control network, supporting 4-20 mA analog signals alongside digital HART data. By enabling real-time diagnostic monitoring and remote configuration of field instruments, the P0916AG significantly reduces plant downtime and optimizes maintenance cycles through predictive asset management.Features
Eight galvanically isolated input channels for high signal integrity.
Supports simultaneous 4-20 mA analog and HART digital communication.
Enables bidirectional data exchange for secondary variables and device diagnostics.
Optimized for high-density DIN rail mounting within the I/A Series 200 system.
Supports redundant configurations to ensure high system availability.
Reduces maintenance overhead via remote instrument configuration and predictive diagnostics.
ApplicationsThis module is widely utilized in process control environments including oil and gas refineries, chemical manufacturing plants, and power generation facilities. It is ideal for applications requiring high-precision analog data acquisition combined with the advanced diagnostic capabilities of HART-enabled field instrumentation.Technical Specifications
Brand
Foxboro (Schneider Electric)
Model
P0916AG
Series
I/A Series 200
Module Type
FBM214 HART Input Interface
Input Channels
8 Isolated
Input Signal
4-20 mA DC with HART
Input Impedance
250 Ohms (nominal)
Accuracy
+/- 0.03% of span
Power Requirements
24 VDC
Power Consumption
3.5 Watts (Maximum)
Operating Temperature
0 to 60 deg C
Storage Temperature
-40 to 70 deg C
Relative Humidity
5 to 95% (Non-condensing)
Installation Guidelines
Ensure the control system is powered down before inserting or removing the module from the baseplate.
Mount the module in a clean, dry environment within the specified temperature range to prevent overheating.
Use shielded twisted-pair cabling for field inputs to minimize electromagnetic interference (EMI).
Ensure proper grounding of the module chassis to the system common to maintain galvanic isolation integrity.
Verify that all field wiring is securely terminated and conforms to local electrical codes for Class 1 Division 2 hazardous locations if applicable.
FAQWhat is the primary function of the P0916AG?The P0916AG acts as an interface between field instruments and the Foxboro I/A Series control system, allowing for the acquisition of 4-20 mA signals while simultaneously passing HART digital data for device diagnostics and configuration.Does this module support redundancy?Yes, the P0916AG is designed to support redundant configurations, which is critical for maintaining process continuity in high-availability automation applications.
4 in stock
Delivery within 48 hours, pay afterwards
Mid weeks Monday to friday we offer next day delivery if the product is on stock and exceptions on holidays.
Weekends We offer no deliveries in the weekends.
International Depending on where you’re located, we offer next day delivery. Check your status on this link
8 in stock
Delivery within 48 hours, pay afterwards
Mid weeks Monday to friday we offer next day delivery if the product is on stock and exceptions on holidays.
Weekends We offer no deliveries in the weekends.
International Depending on where you’re located, we offer next day delivery. Check your status on this link
DescriptionThe Foxboro FBM217 (P0914TR) is a high-density Discrete Input Module designed for the Foxboro I/A Series distributed control system. It provides 32 isolated discrete input channels, facilitating the monitoring of multiple field contacts such as limit switches, pushbuttons, and relay contacts. Engineered for mission-critical industrial applications in oil refining, power generation, and chemical processing, the FBM217 ensures rapid and reliable signal acquisition. The module features robust optical isolation to protect internal system logic from field-side electrical noise and transients, playing a vital role in maintaining process safety and reducing unscheduled downtime.Features
32 isolated discrete input channels for high-density monitoring.
Supports 24 VDC contact closure inputs.
2 Mbps redundant Module Fieldbus communication for high-availability data acquisition.
Integrated signal conditioning and filtering to mitigate contact bounce and EMI.
Continuous self-diagnostics for internal circuitry and field power monitoring.
Hot-swappable architecture allows for module replacement without interrupting field wiring or system operation.
Supports both single and redundant module configurations.
Technical Specifications
Model
FBM217 (P0914TR)
Brand
Foxboro by Schneider Electric
Module Type
Discrete Input (32 Channels)
Input Signal
24 VDC (Contact closure)
Communication
2 Mbps Redundant Module Fieldbus
Isolation
600 VAC (Field-to-Bus and Field-to-Ground)
Operating Temperature
-20 to +70 deg C
Storage Temperature
-40 to +85 deg C
Humidity
5 to 95% (Noncondensing)
Power Consumption
3.5 W (Max)
Weight
0.28 kg
Installation Guidelines
Ensure the system power is de-energized before installing or removing the module from the baseplate.
The module is hot-swappable; however, ensure proper ESD precautions are taken during handling to prevent damage to sensitive internal electronics.
Verify that the baseplate is properly grounded to maintain the integrity of the 600 VAC isolation rating.
Route field wiring away from high-EMI sources, such as high-voltage power lines or variable frequency drives, to prevent signal interference.
Ensure adequate ventilation in the cabinet to maintain operating temperatures within the specified -20 to +70 deg C range.
Compliance and CertificationsThe FBM217 is designed for use in hazardous locations and carries the following certifications: Class I Div 2, ATEX Zone 2, CE, and CSA.FAQIs the FBM217 compatible with redundant configurations?Yes, the FBM217 supports both single and redundant module configurations. In a redundant setup, two modules operate in parallel to ensure uninterrupted data flow if one unit fails.What is the primary function of the optical isolation in this module?The optical isolation is designed to protect the internal system logic of the I/A Series controller from field-side electrical noise, transients, and potential ground loops.
8 in stock
Delivery within 48 hours, pay afterwards
Mid weeks Monday to friday we offer next day delivery if the product is on stock and exceptions on holidays.
Weekends We offer no deliveries in the weekends.
International Depending on where you’re located, we offer next day delivery. Check your status on this link
3 in stock
Delivery within 48 hours, pay afterwards
Mid weeks Monday to friday we offer next day delivery if the product is on stock and exceptions on holidays.
Weekends We offer no deliveries in the weekends.
International Depending on where you’re located, we offer next day delivery. Check your status on this link
DescriptionThe Foxboro P0926HT (also identified as RH926HT) is an 8-position modular baseplate engineered for the Foxboro I/A Series and Foxboro Evo distributed control systems. This baseplate serves as the mechanical and electrical foundation for 200 Series Fieldbus Modules (FBM). Designed for high-density control environments, it facilitates the integration of control modules while supporting both single and redundant configurations to ensure system reliability and high availability.Features
Supports up to eight 200 Series FBMs or Fieldbus Communication Modules (FCM).
Passive backplane design for reliable distribution of 24 VDC redundant power.
Facilitates 2 Mbps HDLC redundant Module Fieldbus communication.
Hot-swappable design allows for module replacement without interrupting field wiring or adjacent operations.
Robust mechanical guides and locking mechanisms ensure secure module seating in high-vibration industrial settings.
Constructed from flame-retardant PC/ABS material (UL94 V0).
ApplicationsThis baseplate is widely utilized in mission-critical industrial automation sectors, including petrochemical refining, utility power generation, and mining operations. It is specifically designed for high-density control cabinets where continuous process monitoring and rapid maintenance are required.Technical Specifications
Model
P0926HT (RH926HT)
Capacity
8 Positions (FBM or FCM)
Mounting
Horizontal 35 mm DIN Rail
Communication
2 Mbps Redundant Module Fieldbus (HDLC)
Input Voltage
24 VDC (Redundant)
Operating Temperature
-20 to +70 deg C
Storage Temperature
-40 to +85 deg C
Relative Humidity
5 to 95% (Noncondensing)
Installation Guidelines
Ensure the baseplate is mounted horizontally on a standard 35 mm DIN rail.
Verify that the power source is disconnected before installing or removing modules to prevent electrical arcing.
Maintain proper clearance around the baseplate to ensure adequate ventilation and cooling.
Use shielded cables for fieldbus communications to minimize EMI interference.
Ensure all redundant power connections are securely terminated to the dedicated terminal blocks.
Handle with care to avoid electrostatic discharge (ESD) damage to the backplane connectors.
Compliance and CertificationsThe P0926HT baseplate is designed to meet rigorous industrial standards, including UL/UL-C Class I Div 2, ATEX Zone 2, and CE marking for safe operation in hazardous environments.FAQIs this baseplate compatible with all 200 Series modules?Yes, the P0926HT is designed specifically to support the Foxboro 200 Series FBM and FCM modules, providing the necessary backplane connectivity for both communication and power.Does this unit support redundant power supplies?Yes, the baseplate features redundant power bus distribution, allowing for dual 24 VDC power inputs to ensure continuous operation if one supply fails.
3 in stock
Delivery within 48 hours, pay afterwards
Mid weeks Monday to friday we offer next day delivery if the product is on stock and exceptions on holidays.
Weekends We offer no deliveries in the weekends.
International Depending on where you’re located, we offer next day delivery. Check your status on this link
1 in stock
Delivery within 48 hours, pay afterwards
Mid weeks Monday to friday we offer next day delivery if the product is on stock and exceptions on holidays.
Weekends We offer no deliveries in the weekends.
International Depending on where you’re located, we offer next day delivery. Check your status on this link
DescriptionThe Schneider ASBZAE204 is a specialized PLC module engineered for industrial automation and control systems. This module is designed to provide reliable signal processing and communication capabilities, facilitating seamless integration within Schneider Electric PLC architectures to support complex process control and automation tasks.Features
Designed for robust performance in demanding industrial environments.
Integrated communication support for Modbus and Ethernet protocols.
Standardized rack-mounting configuration for efficient cabinet space utilization.
Operates on a standard 24 VDC power supply.
Technical Specifications
Module Type
PLC Module
Power Supply
24 VDC
Communication Interfaces
Modbus, Ethernet
Mounting Type
Rack-mounted
Operating Temperature
0 degC to 60 degC
Installation Guidelines
Ensure the PLC rack is properly grounded according to local electrical codes before installing the module.
Power down the system before inserting or removing the module to prevent electrical damage or bus communication errors.
Verify that the module is fully seated in the rack slot and that the locking mechanism is engaged.
Route communication cables away from high-voltage power lines to minimize electromagnetic interference (EMI).
Maintain adequate ventilation clearance around the rack to ensure the module stays within its operating temperature range.
FAQWhat is the primary function of the ASBZAE204?The ASBZAE204 is a PLC module used for automation control, supporting communication via Modbus and Ethernet protocols within a Schneider PLC system.What power supply is required for this module?This module operates on a 24 VDC power supply.Is this module rack-mounted?Yes, the ASBZAE204 is designed for standard rack-mounting within an industrial control cabinet.
1 in stock
Delivery within 48 hours, pay afterwards
Mid weeks Monday to friday we offer next day delivery if the product is on stock and exceptions on holidays.
Weekends We offer no deliveries in the weekends.
International Depending on where you’re located, we offer next day delivery. Check your status on this link
2 in stock
Delivery within 48 hours, pay afterwards
Mid weeks Monday to friday we offer next day delivery if the product is on stock and exceptions on holidays.
Weekends We offer no deliveries in the weekends.
International Depending on where you’re located, we offer next day delivery. Check your status on this link
DescriptionThe TSXRKY8EX is an 8-slot rugged expansion rack base designed for the Schneider Electric Modicon Premium automation platform. This chassis facilitates the physical and logical scaling of PLC systems by providing a stable backplane for high-density I/O and communication modules. It is engineered for demanding industrial environments, including chemical processing, petroleum refining, and power generation, ensuring reliable signal integrity and reduced system downtime.Features
Supports up to 8 standard Modicon Premium functional modules.
Integrated passive backplane with high-speed bus communication.
Dedicated 9-pin female connector for TSXBusX high-speed network extension.
Onboard rotary hex switch for rack address configuration.
Robust metallic chassis with integrated M6 copper grounding studs for enhanced EMC.
Flexible mounting options including direct panel screw fixation or 35 mm DIN rail.
ApplicationsThis expansion rack is suitable for distributed I/O architectures in large-scale automation systems. It is commonly deployed in thermal power stations, mining extraction grids, and complex manufacturing lines where modular scalability and high-availability communication are critical.Technical Specifications
Model
TSXRKY8EX
Slots
8
Bus Type
Modicon Premium Backplane Bus
Interface
1 x 9-pin female TSXBusX
Max Expansion Racks
3 bases per segment
Operating Temp
0 to 60 deg C
Storage Temp
-25 to 70 deg C
Humidity
10% to 95% (non-condensing)
Power Consumption
1.8 W (passive)
Protection
IP20
Standards
CE, UL 508, CSA C22.2, IEC 61131-2
Installation Guidelines
Ensure the rack is mounted on a flat, vibration-resistant surface or a properly secured 35 mm DIN rail.
Always power down the system before installing or removing any modules from the rack slots.
Connect the M6 grounding studs to a low-impedance earth ground to minimize electromagnetic interference.
Maintain proper ventilation clearance around the rack to ensure operating temperatures remain within the 0 to 60 deg C range.
Verify the rotary address switch is set correctly for the specific rack segment before powering up the bus.
FAQCan this rack be used as a standalone base? No, the TSXRKY8EX is designed as an extension rack base and requires connection to a primary processor rack or another upstream expansion chassis via the TSXBusX link.How many expansion racks can I add? The system architecture supports up to 3 expansion bases per segment.
2 in stock
Delivery within 48 hours, pay afterwards
Mid weeks Monday to friday we offer next day delivery if the product is on stock and exceptions on holidays.
Weekends We offer no deliveries in the weekends.
International Depending on where you’re located, we offer next day delivery. Check your status on this link
4 in stock
Delivery within 48 hours, pay afterwards
Mid weeks Monday to friday we offer next day delivery if the product is on stock and exceptions on holidays.
Weekends We offer no deliveries in the weekends.
International Depending on where you’re located, we offer next day delivery. Check your status on this link
DescriptionThe Schneider TSXAMZ600 is a high-performance analogue I/O module designed for integration within industrial automation systems. This module provides precise signal acquisition and control capabilities, featuring four analogue inputs and two analogue outputs. It is specifically engineered for compatibility with the RMS-TSG-TZ-C series PLC architecture, offering a reliable solution for modular process control and monitoring applications.Features
Four configurable analogue input channels supporting voltage (0-10 V) or current (0-20 mA) signals.
Two analogue output channels for precise control of actuators and process instrumentation.
High-resolution 12-bit conversion for accurate data processing.
Compact, space-saving design suitable for standard PLC rack mounting.
Robust construction designed for industrial environments with an operating temperature range of 0 degC to 60 degC.
ApplicationsThis module is suitable for various industrial automation tasks, including process variable monitoring, actuator control, and integration into complex PLC-based control loops within manufacturing and process industries.Technical Specifications
Manufacturer
Schneider Electric
Model
TSXAMZ600
Series
RMS-TSG-TZ-C
Analogue Inputs
4 channels (0-10 V / 0-20 mA)
Analogue Outputs
2 channels (0-10 V / 0-20 mA)
Input Impedance
10 kOhm (voltage), 250 Ohm (current)
Output Load Capacity
500 Ohm maximum
Resolution
12-bit
Accuracy
+/- 0.5%
Response Time
10 ms typical
Power Supply
24 VDC
Operating Temperature
0 degC to 60 degC
Installation Guidelines
Ensure the PLC rack power is disconnected before installing or removing the module to prevent electrical damage.
Mount the module securely in the designated rack slot, ensuring proper alignment with the backplane connector.
Use shielded twisted-pair cabling for all analogue signal connections to minimize electromagnetic interference (EMI).
Maintain proper grounding practices for the PLC system to ensure signal integrity and safety.
Keep the module away from high-voltage power lines and high-EMI equipment to prevent signal noise.
Ensure adequate ventilation within the control cabinet to maintain operating temperatures within the specified 0-60 degC range.
FAQWhat is the resolution of the TSXAMZ600 module?The module features 12-bit resolution for both input and output channels.Can this module handle both voltage and current signals?Yes, the module is designed to support both 0-10 V voltage and 0-20 mA current signals for its input and output channels.What is the required power supply for this module?The TSXAMZ600 operates on a 24 VDC power supply.
4 in stock
Delivery within 48 hours, pay afterwards
Mid weeks Monday to friday we offer next day delivery if the product is on stock and exceptions on holidays.
Weekends We offer no deliveries in the weekends.
International Depending on where you’re located, we offer next day delivery. Check your status on this link
8 in stock
Delivery within 48 hours, pay afterwards
Mid weeks Monday to friday we offer next day delivery if the product is on stock and exceptions on holidays.
Weekends We offer no deliveries in the weekends.
International Depending on where you’re located, we offer next day delivery. Check your status on this link
The Schneider Electric VW3A3607 is a dedicated communication module designed for integration within the Altivar drive range. This module enables seamless connectivity and data exchange between Altivar variable speed drives and a Profibus DP V1 fieldbus network, facilitating advanced control and monitoring in industrial automation environments.Features
Designed specifically for the Altivar product range.
Supports Profibus DP V1 communication protocol for robust fieldbus integration.
Equipped with a standard 9-pin female SUB-D connector for reliable physical connection.
Supports a wide range of transmission rates from 9.6 kbps up to 12 Mbps.
Technical Specifications
Product Model
VW3A3607
Product Type
Communication Module
Communication Protocol
Profibus DP V1
Electrical Connection
1 x Female SUB-D 9 connector
Transmission Rate
9.6 kbps to 12 Mbps
Weight
0.28 kg
Installation Guidelines
Ensure the drive is completely powered down and the DC bus capacitors have discharged before installing or removing the communication module.
Handle the module with care, observing standard ESD (Electrostatic Discharge) precautions to prevent damage to internal circuitry.
Insert the module into the designated option slot on the Altivar drive, ensuring it is firmly seated and secured using the provided mounting hardware.
Use high-quality, shielded Profibus-compliant cabling to minimize electromagnetic interference (EMI) in industrial environments.
Ensure the cable shield is properly grounded at the cabinet entry point or as specified by the drive installation manual.
Verify that the Profibus address and termination settings are correctly configured via the drive's HMI or software parameters after installation.
FAQWhat is the primary function of the VW3A3607?The VW3A3607 acts as a gateway, allowing an Altivar drive to function as a slave device on a Profibus DP V1 network, enabling remote control, monitoring, and parameterization.Is this module compatible with all Altivar drives?This module is designed for the Altivar range. Please verify your specific drive model's compatibility documentation to ensure the VW3A3607 is supported for your hardware configuration.
8 in stock
Delivery within 48 hours, pay afterwards
Mid weeks Monday to friday we offer next day delivery if the product is on stock and exceptions on holidays.
Weekends We offer no deliveries in the weekends.
International Depending on where you’re located, we offer next day delivery. Check your status on this link
4 in stock
Delivery within 48 hours, pay afterwards
Mid weeks Monday to friday we offer next day delivery if the product is on stock and exceptions on holidays.
Weekends We offer no deliveries in the weekends.
International Depending on where you’re located, we offer next day delivery. Check your status on this link
DescriptionThe Schneider 140XCP40200 is a 19-inch rear rail mounting bracket engineered for the Modicon automation series. This component provides a stable and secure mounting interface for industrial control equipment within standard 19-inch rack enclosures, ensuring structural integrity and proper alignment of system components in demanding industrial environments.Features
Designed specifically for Modicon series industrial control systems.
Standard 19-inch width for compatibility with industrial rack infrastructure.
Constructed from durable steel for long-term mechanical support.
Rear rail mounting configuration for efficient cabinet space utilization.
Operating temperature range suitable for harsh industrial conditions (-20 degC to 70 degC).
Technical Specifications
Model
140XCP40200
Product Type
19-inch Rear Rail Mounting Bracket
Manufacturer
Schneider Electric
Product Line
Modicon
Material
Steel
Mounting Type
Rear rail
Operating Temperature
-20 degC to 70 degC
Installation Guidelines
Ensure the 19-inch rack rails are properly grounded before installing the bracket to maintain system-wide electrical safety.
Verify that the mounting surface is clean and free of debris to ensure a flush fit.
Use appropriate hardware to secure the bracket to the rear rails, ensuring all fasteners are tightened to the torque specifications required by the enclosure manufacturer.
When mounting heavy automation modules, ensure the weight is evenly distributed across the bracket to prevent mechanical stress.
Maintain adequate clearance around the mounted components to allow for proper airflow and cooling within the cabinet.
FAQWhat is the primary function of the 140XCP40200?The 140XCP40200 is a mounting bracket used to secure Modicon automation components to the rear rails of a standard 19-inch industrial rack.Is this bracket compatible with non-Modicon systems?This bracket is specifically designed for the Schneider Electric Modicon series. While it fits standard 19-inch rails, compatibility with other brands or systems is not guaranteed and should be verified against the specific equipment mounting requirements.
4 in stock
Delivery within 48 hours, pay afterwards
Mid weeks Monday to friday we offer next day delivery if the product is on stock and exceptions on holidays.
Weekends We offer no deliveries in the weekends.
International Depending on where you’re located, we offer next day delivery. Check your status on this link
2 in stock
Delivery within 48 hours, pay afterwards
Mid weeks Monday to friday we offer next day delivery if the product is on stock and exceptions on holidays.
Weekends We offer no deliveries in the weekends.
International Depending on where you’re located, we offer next day delivery. Check your status on this link
DescriptionThe Invensys Triconex 9563 is a high-density Digital Input Termination Panel engineered for use within Triconex Safety Instrumented Systems (SIS). This component is designed to condition and route discrete signals from field infrastructure into the safety control architecture, ensuring reliable signal conversion for emergency shutdown (ESD) and critical process monitoring applications. It is suitable for deployment in high-risk industrial environments, including oil and gas refineries, chemical production facilities, thermal power stations, and mining operations.Features
32 discrete input channels for high-density signal management.
Supports both single-ended and differential wiring topologies.
Integrated circuitry for electrical noise filtering and signal conditioning.
High-speed solid-state signal paths to minimize latency.
Optimized layout designed to prevent signal crosstalk between adjacent channels.
Robust construction for reliable operation in demanding safety-critical environments.
ApplicationsThe 9563 termination panel is primarily utilized in safety-critical loops where deterministic signal processing is required. It is essential for interfacing field-mounted sensors and switches with the main Triconex controller, facilitating rapid response to hazardous process conditions while minimizing spurious trips.Technical Specifications
Brand
Invensys Triconex
Model
9563
Module Type
Digital Input Termination Panel
Channel Count
32
Input Voltage Range
-24 VDC to 24 VDC
Input Current
2 mA
Logic Levels
0 VDC to 5 VDC
Response Time
< 10 microseconds
Operating Temperature
-40 to 70 deg C
Ingress Protection
IP20
Installation Guidelines
Ensure the system power is disconnected before installing or removing the termination panel.
Mount the panel in a clean, dry, and vibration-free environment, typically within an industrial enclosure.
Use shielded cabling for all field inputs to maintain high noise immunity and signal integrity.
Ensure proper grounding of the panel chassis to the cabinet ground bus to mitigate EMI/RFI.
Verify that all field wiring is correctly terminated according to the specific loop requirements (single-ended vs. differential).
Maintain adequate clearance around the module to ensure proper ventilation and prevent overheating.
FAQIs the Triconex 9563 compatible with all Triconex SIS controllers?The 9563 is designed for specific Triconex SIS architectures. Please verify your system documentation or the specific controller compatibility list to ensure this termination panel meets your system's requirements.What is the primary function of this panel?The 9563 acts as an interface between raw field instrumentation and the safety controller, providing signal conditioning, noise filtering, and efficient routing of 32 discrete input channels.
2 in stock
Delivery within 48 hours, pay afterwards
Mid weeks Monday to friday we offer next day delivery if the product is on stock and exceptions on holidays.
Weekends We offer no deliveries in the weekends.
International Depending on where you’re located, we offer next day delivery. Check your status on this link
7 in stock
Delivery within 48 hours, pay afterwards
Mid weeks Monday to friday we offer next day delivery if the product is on stock and exceptions on holidays.
Weekends We offer no deliveries in the weekends.
International Depending on where you’re located, we offer next day delivery. Check your status on this link
DescriptionThe Schneider Electric TSXP575634M is a high-performance Unity processor designed for the Modicon Premium automation platform. This module serves as the central processing unit, engineered to execute complex control logic and manage large-scale automation tasks with high reliability and speed. It is built to support the scalable architecture required for demanding industrial control environments.Features
Advanced Unity processing platform for optimized execution of control programs.
Designed for seamless integration within Modicon Premium rack-based systems.
High-speed processing capabilities suitable for complex automation strategies.
Robust architecture ensuring stability in industrial environments.
ApplicationsThis processor is typically deployed in large-scale manufacturing, process control, and infrastructure automation systems where high-speed logic execution and scalable I/O management are required.Technical Specifications
Brand
Schneider Electric
Model
TSXP575634M
Series
Modicon Premium
Processor Type
Unity Processor
Mounting
Premium rack slot
Weight
0.65 kg
Installation Guidelines
Ensure the rack power is disconnected before inserting or removing the processor module.
Verify that the module is correctly seated in the designated Premium rack slot to ensure proper backplane communication.
Handle the module using ESD-safe practices to prevent damage to sensitive internal circuitry.
Ensure adequate ventilation around the rack assembly to maintain operating temperatures within specified limits.
Check that all firmware and software configurations are compatible with the Unity platform requirements before commissioning.
FAQIs this processor compatible with all Premium series racks?Yes, the TSXP575634M is designed for standard Modicon Premium rack assemblies. Please ensure your specific rack configuration and power supply are rated for this processor model.Does this unit require specific software for programming?The TSXP575634M is part of the Unity platform and typically requires the Unity Pro (now EcoStruxure Control Expert) software suite for configuration and programming.
7 in stock
Delivery within 48 hours, pay afterwards
Mid weeks Monday to friday we offer next day delivery if the product is on stock and exceptions on holidays.
Weekends We offer no deliveries in the weekends.
International Depending on where you’re located, we offer next day delivery. Check your status on this link
1 in stock
Delivery within 48 hours, pay afterwards
Mid weeks Monday to friday we offer next day delivery if the product is on stock and exceptions on holidays.
Weekends We offer no deliveries in the weekends.
International Depending on where you’re located, we offer next day delivery. Check your status on this link
DescriptionThe Schneider ASB808016 is a high-performance 16-point discrete output module designed for integration into RMS-TSG-TZ-C series industrial automation systems. This module provides reliable switching control for field devices, operating at a standard industrial voltage of 230 VAC. It is engineered for modular PLC architectures, allowing for efficient system expansion and streamlined control of multiple discrete loads in demanding industrial environments.Features
16 discrete output channels for high-density control applications.
Designed for 230 VAC operation at 50/60 Hz.
Maximum load current of 0.5 A per channel.
Optimized for seamless integration within the Schneider RMS-TSG-TZ-C series PLC ecosystem.
Compact, rack-mountable form factor for efficient control panel space utilization.
Technical Specifications
Parameter
Details
Manufacturer
Schneider Electric
Model
ASB808016
Series
RMS-TSG-TZ-C
Category
Discrete Output Module
Number of Points
16
Voltage Rating
230 VAC
Frequency
50/60 Hz
Max Load Current
0.5 A per point
Operating Temperature
0 degC to 60 degC
Mounting Type
Rack mount / PLC slot
Installation Guidelines
Ensure the PLC system power is disconnected before installing or removing the module to prevent electrical damage.
Verify that the slot is compatible with the RMS-TSG-TZ-C series architecture before seating the module.
Use appropriate ESD protection when handling the module to prevent damage to internal circuitry.
Ensure all field wiring is properly secured to the terminal blocks and routed to minimize EMI interference from high-voltage power lines.
Confirm proper grounding of the PLC rack to maintain signal integrity and safety.
FAQWhat is the primary function of the ASB808016 module?The ASB808016 is a discrete output module that provides 16 channels of 230 VAC switching, allowing the PLC to control external field devices such as relays, contactors, or indicators.Is this module compatible with other Schneider series?This module is specifically designed for the RMS-TSG-TZ-C series. Please consult your system documentation to ensure compatibility with your specific PLC rack configuration.
1 in stock
Delivery within 48 hours, pay afterwards
Mid weeks Monday to friday we offer next day delivery if the product is on stock and exceptions on holidays.
Weekends We offer no deliveries in the weekends.
International Depending on where you’re located, we offer next day delivery. Check your status on this link
6 in stock
Delivery within 48 hours, pay afterwards
Mid weeks Monday to friday we offer next day delivery if the product is on stock and exceptions on holidays.
Weekends We offer no deliveries in the weekends.
International Depending on where you’re located, we offer next day delivery. Check your status on this link
DescriptionThe Schneider AS8535000 is a robust high/low-density connector engineered for integration within industrial automation architectures, specifically compatible with the Modicon platform. This component facilitates reliable signal and data transmission for systems requiring up to 800 I/O points. Designed for versatility, it supports both high and low-density configurations, ensuring consistent performance in demanding industrial environments.Features
Designed for seamless integration with the Modicon series platform.
Supports high and low-density I/O configurations.
Maximum system capacity of 800 I/O points.
Durable polycarbonate housing for industrial protection.
Secure screw terminal interface for reliable connectivity.
Technical Specifications
Model
Schneider AS8535000
Product Type
High/Low Density Connector
Product Line
Modicon Series
I/O Capacity
800 I/O Points
Mounting Type
DIN Rail
Housing Material
Polycarbonate
Connection Interface
Screw Terminal
Operating Temperature
-20 degC to 70 degC
Storage Temperature
-40 degC to 85 degC
Humidity Range
5% to 95% (Non-Condensing)
Installation Guidelines
Ensure the control system is powered down before installing or removing the connector to prevent electrical damage.
Mount the unit on a standard DIN rail, ensuring a secure click-in fit to maintain structural integrity.
Verify that all screw terminals are tightened to the recommended torque to prevent loose connections and intermittent signal loss.
Route signal cables away from high-voltage power lines and sources of electromagnetic interference (EMI) to maintain signal integrity.
Maintain adequate ventilation around the module to ensure operating temperatures remain within the specified -20 degC to 70 degC range.
FAQWhat is the primary function of the AS8535000?The AS8535000 serves as a high/low-density connector module for the Schneider Modicon series, designed to facilitate reliable I/O connectivity for up to 800 points.Is this connector suitable for high-density applications?Yes, the module is specifically engineered to handle both high and low-density I/O requirements within the Modicon platform.What type of mounting does this module support?The AS8535000 is designed for standard DIN rail mounting, allowing for efficient installation in industrial control cabinets.
6 in stock
Delivery within 48 hours, pay afterwards
Mid weeks Monday to friday we offer next day delivery if the product is on stock and exceptions on holidays.
Weekends We offer no deliveries in the weekends.
International Depending on where you’re located, we offer next day delivery. Check your status on this link
10 in stock
Delivery within 48 hours, pay afterwards
Mid weeks Monday to friday we offer next day delivery if the product is on stock and exceptions on holidays.
Weekends We offer no deliveries in the weekends.
International Depending on where you’re located, we offer next day delivery. Check your status on this link
DescriptionThe Schneider Electric TSXDSY16R5 is a high-performance discrete output module designed for integration within Modicon PLC automation architectures. This module provides 16 independent relay output channels, offering reliable switching control for a wide variety of industrial field devices, including actuators, contactors, and indicators. Its compact, modular design is engineered for efficient installation in space-constrained control cabinets.Features
16-point discrete output configuration.
Relay output type suitable for both inductive and resistive loads.
High-density design for space-saving installation.
Robust electrical isolation between output channels and the internal bus.
Seamless compatibility with Modicon PLC backplanes.
Technical Specifications
Manufacturer
Schneider Electric
Model
TSXDSY16R5
Type
Discrete Output Module
Number of Points
16 Points
Output Type
Relay
Contact Rating
2A per channel
Isolation
1500V RMS between channels and bus
Weight
0.25 kg
Installation Guidelines
Ensure the PLC power supply is disconnected before installing or removing the module from the backplane.
Mount the module on a standard DIN rail or compatible rack system, ensuring proper seating to avoid backplane connector damage.
Maintain adequate spacing around the module to allow for proper heat dissipation and airflow within the control cabinet.
Route output wiring away from high-voltage power cables and sources of electromagnetic interference (EMI) to prevent signal noise.
Verify all terminal connections are secure and that the load connected to each relay channel does not exceed the 2A rating.
Follow standard ESD (Electrostatic Discharge) handling procedures when touching the module circuitry.
FAQWhat type of loads can the TSXDSY16R5 handle?The module features relay outputs capable of switching both resistive and inductive loads, provided the current does not exceed the specified 2A per channel limit.Is this module compatible with all Modicon PLCs?The TSXDSY16R5 is designed for specific Modicon PLC series backplanes. Please verify your system's hardware compatibility list before installation.What is the isolation rating of this module?This module provides 1500V RMS isolation between the output channels and the internal bus, ensuring protection for the controller against field-side electrical faults.
10 in stock
Delivery within 48 hours, pay afterwards
Mid weeks Monday to friday we offer next day delivery if the product is on stock and exceptions on holidays.
Weekends We offer no deliveries in the weekends.
International Depending on where you’re located, we offer next day delivery. Check your status on this link
