PLC systems and modules deliver flexible automation for industries worldwide. Our inventory includes controllers, input/output modules, and communication units from Allen-Bradley, Siemens, GE, and other leading brands.
PLC Systems & Modules
-
General Electric GE IC693ACC400 Expanded Battery Backup Module
Product Description The IC693ACC400 is a high-capacity battery backup module engineered for GE Fanuc Series 90‑30 and VersaMax PLC systems. It provides extended retention of CPU logic, register data, configuration settings, and real-time clock information during power interruptions, ensuring continuous system reliability in mission-critical industrial applications. Featuring a lithium high-capacity cell, this energy pack significantly outperforms standard CPU batteries, offering backup duration up to 3–5 years depending on operating temperature. Direct plug-in installation to the CPU battery port simplifies deployment, while LED indicators monitor battery health and charging status. Safety features include overcharge, short-circuit, and reverse-polarity protection. Ideal for environments with fluctuating temperatures, power plants, manufacturing lines, and process control systems, the IC693ACC400 ensures data integrity and prevents cold-start errors after outages. Technical Specifications Parameter Specification Model IC693ACC400 Manufacturer GE Fanuc / Emerson Product Type Expanded Battery Backup Module Compatible PLCs Series 90‑30, VersaMax (CPE305 / CPE310 / CPE302) Battery Type Lithium high-capacity cell (some variants Li‑ion or NiMH) Nominal Voltage 3.0–3.6 VDC Capacity 7.5–8.5 Ah Typical Backup Duration 3–5 years (temperature dependent) Recharge Time ~24 hours (rechargeable variants) Operating Temperature 0–60 °C Storage Temperature –20–70 °C Shelf Life Up to 5 years Dimensions 2.62 × 50 mm (diameter × height) Weight 0.29 lb Mounting On-module, rack or chassis compatible Connector Type Samtec IPD1‑04‑D‑K Cable IC695CBL001, 3 ft (0.91 m), PVC-insulated tinned copper LED Indicators Charging, Fault, Low Capacitance, Charged Compliance EU RoHS Directive 2011/65/EU Key Features & Advantages Provides long-duration memory retention for CPU logic and registers High-capacity lithium cell ensures stable voltage and reliable backup Preserves real-time clock and retentive data to prevent cold-start errors LED diagnostics for quick monitoring of battery health Direct plug-in installation for easy replacement without system disassembly Robust protection against overcharge, short-circuits, and reverse polarity Compatible with Series 90‑30 and VersaMax CPUs, including CPE302, CPE305, CPE310 Applications Mission-critical automation systems in power generation and manufacturing Process industries requiring reliable PLC memory retention Environments with electrical noise or fluctuating temperatures Systems where data integrity during outages is essential FAQ Q: How long does the backup last under normal operation?A: The IC693ACC400 provides 3–5 years of typical retention depending on temperature and usage. Q: Can this battery be installed without powering down the PLC?A: Yes, it supports plug-and-play replacement on the CPU battery port without rack disassembly. Q: Which PLCs are compatible?A: Series 90‑30 CPUs, including CPE302, CPE305, and CPE310, as well as VersaMax PLCs for memory and RTC backup.
$200.00 $100.00
-
General Electric GE IC694CEE001 RX3i CEP Expansion Carrier PROFINET I/O Module
Product Description The IC694CEE001 is a Communication Expansion Processor (CEP) expansion carrier for the PACSystems RX3i platform. Designed to attach to the IC694CEP001 module, it provides one additional RX3i I/O slot, enabling a remote PROFINET I/O node to host a second I/O module. This allows distributed nodes to support higher I/O density while maintaining high availability and low-latency communication. Equipped with an integrated 10/100 Mbps RJ‑45 Ethernet interface, the IC694CEE001 distributes 24 VDC / 700 mA to downstream I/O modules. The carrier supports PROFINET I/O communication, module scanning, fault reporting, and full diagnostics. Its compact DIN-rail-compatible design ensures flexible installation in control cabinets and distributed I/O clusters. Technical Specifications Parameter Specification Model IC694CEE001 Manufacturer GE Fanuc / Emerson Product Line RX3i PACSystems Module Type CEP Expansion Carrier Function Adds one expansion slot to remote RX3i I/O node Compatible Host IC694CEP001 required Total Supported Slots 2 (1 on CEP001 + 1 on CEE001) Weight 0.26 kg (0.56 lbs) Input Voltage 24 VDC from host CEP001 Current Capacity 700 mA for downstream modules Ethernet Interface 1× RJ‑45, 10/100 Mbps Communication Protocol PROFINET I/O (IO‑Device) I/O Data Capacity 32 input bits + 32 output bits Supported Topologies Daisy-chain, star, ring (redundant media) USB Port Firmware updates only (WinLoader) Mounting DIN-rail or panel Indicators LEDs for power, network, and module health Operating Temperature 0–60 °C Storage Temperature –40–85 °C Humidity 5–95% non-condensing Protection Rating IP20 (indoor use) Key Features & Advantages Expands a remote PROFINET node to host two RX3i I/O modules Integrated 10/100 Mbps Ethernet interface for fast communication Supplies 700 mA power to additional downstream modules Supports full module scanning, I/O state management, and fault reporting Compatible with redundant network topologies for high availability Compact, DIN-rail-friendly design for flexible installation in cabinets Applications Distributed RX3i PROFINET I/O networks Remote I/O clusters requiring expansion beyond a single module High-availability automation systems with redundancy requirements Industrial control cabinets where space-efficient expansion is needed FAQ Q: Can the module function independently?A: No, IC694CEE001 must be attached to a host IC694CEP001 carrier. Q: How much power can it provide to downstream modules?A: Up to 700 mA at 24 VDC. Q: Does it support redundant network topologies?A: Yes, it supports daisy-chain, star, and ring configurations.
$200.00 $100.00
-
General Electric GE IC695CEP001 RX3i CEP PROFINET Carrier Module
Product Description The IC695CEP001 is a dedicated Communication Expansion Processor (CEP) carrier for the PACSystems RX3i platform, enabling a remote I/O node to connect directly to a PROFINET network. Functioning as a PROFINET Version 2.3 Class A IO‑Device, this module allows a single RX3i I/O module—or two when used with the IC694CEE001 expansion carrier—to operate as a full remote PROFINET station. Equipped with dual 10/100Base‑TX Ethernet ports and a micro-USB interface for firmware updates, the IC695CEP001 manages I/O scanning, publishes and receives data to/from a PROFINET IO‑Controller, and provides comprehensive diagnostics. Its compact design supports flexible mounting and reliable operation in industrial environments. Technical Specifications Parameter Specification Model IC695CEP001 Manufacturer GE Fanuc / Emerson Product Line RX3i PACSystems Module Type CEP Carrier for PROFINET PROFINET Support Version 2.3, Class A IO‑Device Ethernet Ports 2× RJ‑45, 10/100Base‑TX, switched, shielded USB Interface 1× Micro‑USB, firmware updates only I/O Data Capacity 512 bytes input + 512 bytes output (1024 bytes total) Max Modules per Station 1 (single CEP) Supported Topologies Daisy-chain, star, ring (redundant media) Input Voltage 24 VDC (range: 19.2–30 VDC) Power Consumption 5.25 W (0.22 A @ 24 VDC) Mounting DIN-rail or panel Dimensions 177 × 51 × 35 mm (6.98 × 2.01 × 1.38 in) Weight 0.55 lbs Operating Temperature 0–60 °C Compliance IEC 61131‑2, CE, RoHS Key Features & Advantages Compact PROFINET communication interface for RX3i systems Dual Ethernet ports for flexible network topologies, including ring redundancy Micro-USB port for firmware updates and maintenance 512-byte I/O capacity per direction for high-density remote I/O Comprehensive LED indicators for power, module status, connection, and Ethernet activity Supports hot insertion/removal, similar to RX3i backplane modules Robust diagnostics and fault reporting for reliable industrial operation Applications Remote I/O nodes in PROFINET networks Distributed control systems requiring Class A IO‑Device connectivity Industrial automation requiring high-density I/O with redundancy support Flexible network architecture deployments including daisy-chain, star, and ring topologies FAQ Q: Can the module be used with more than one I/O module?A: Yes, when paired with IC694CEE001, it can support two I/O modules per PROFINET station. Q: How is firmware updated?A: Firmware updates are performed via the Micro-USB port using WinLoader software. Q: Does it support redundant networks?A: Yes, it supports ring topology and PROFINET-based CPU redundancy.
$200.00 $100.00
-
General Electric GE IC695ALG112 RX3i 12-Channel Isolated Analog Input Module
Product Description The IC695ALG112 is a high-precision 12-channel isolated analog input module designed for the PACSystems RX3i platform. Each channel is independently isolated, allowing safe and reliable measurement of mixed voltage and current signals in demanding industrial environments. This module supports configurable voltage and current ranges, per-channel diagnostics, open-circuit detection, and multiple alarm settings. Its hot-swap capability allows installation or removal without shutting down the backplane, minimizing downtime. The IC695ALG112 is ideal for process plants, utilities, OEM machinery, and distributed I/O systems requiring high-integrity analog data acquisition. Technical Specifications Parameter Specification Model IC695ALG112 Manufacturer GE Fanuc / Emerson Product Line RX3i PACSystems Module Type Isolated Analog Input Module Number of Channels 12 Input Signal Types Voltage & Current Voltage Ranges ±10 V, 0–10 V, ±5 V, 0–5 V, 1–5 V Current Ranges 0–20 mA, 4–20 mA, ±20 mA Input Impedance 500 kΩ (Voltage), 250 Ω ±1% (Current) Resolution 16-bit ADC, IEEE 32-bit float or 16-bit integer Digital Filters 8 Hz, 12 Hz, 16 Hz, 40 Hz, 250 Hz, 1000 Hz Alarm Types High, Low, High-High, Low-Low, Rate-of-Change Open-Circuit Detection Yes, ~1 second response Backplane Power 5 VDC: 490 mA max; 3.3 VDC: 310 mA max Max Power Dissipation 4.89 W (all channels at 20 mA) Slot Requirement Single RX3i backplane slot Terminal Blocks (ordered separately) IC694TBB032, IC694TBB132 (box); IC694TBS032, IC694TBS132 (spring) Hot-Swap Supported Operating Temperature 0–60 °C Storage Temperature –40–85 °C Humidity 5–95% non-condensing Weight 0.81 lbs Key Features & Advantages 12 individually isolated channels for mixed analog signals Flexible voltage and current range selection per channel Hot-swappable design for minimal system downtime Built-in diagnostics and per-channel alarm detection Configurable scaling, offsets, and digital filtering Suitable for harsh industrial environments and long cable runs Applications Process control plants (chemical dosing, pumps, compressors) Power generation monitoring (temperature, vibration, lube-oil) Water & wastewater systems (pressure, flow, and level transmitters) OEM machinery with mixed voltage/current feedback requirements Distributed I/O systems in electrically noisy environments FAQ Q: Can the module be inserted while the system is powered?A: Yes, the IC695ALG112 is hot-swappable, allowing installation or replacement without powering down the backplane. Q: What accuracy can be expected over time?A: Calibrated accuracy is ±0.1% at 25 °C and ±0.2% across the full temperature range. Periodic calibration adjustments are recommended. Q: Which terminal blocks are compatible?A: Compatible blocks include IC694TBB032, IC694TBB132 (box style) and IC694TBS032, IC694TBS132 (spring style).
$200.00 $100.00
-
General Electric GE IC693CBL302 I/O Bus Expansion Cable
Product Description The IC693CBL302 is a 15‑meter I/O bus expansion cable engineered for the GE Fanuc Series 90‑30 PLC system. Specifically designed as the final link in a daisy‑chain configuration, it connects the CPU baseplate to the last expansion or remote baseplate, ensuring reliable communication across long distances. Featuring an integrated 100‑ohm termination resistor, the IC693CBL302 eliminates the need for external terminators, maintaining signal integrity at the end of the bus. Its continuous EMI shielding and rugged industrial construction provide high noise immunity and stable data transmission in electrically harsh environments. This makes it ideal for distributed control systems and complex automation setups. Technical Specifications Parameter Specification Model IC693CBL302 Manufacturer GE Fanuc / Emerson Product Line Series 90‑30 Product Type I/O Bus Expansion Cable Cable Length 15 meters (50 ft) Usage End-of-chain cable for final expansion link Weight 3.75 lbs Conductor Gauge 24 AWG stranded Voltage Rating Up to 300 V AC/DC Current Capacity 1 A max Impedance 100 Ω nominal Data Rate Up to 10 Mbps Insulation Resistance >1000 MΩ @ 500 VDC Connectors Male 25‑pin D‑Sub on both ends Termination Built-in 100‑ohm resistor Shielding Continuous EMI shielding (>90% noise reduction) Operating Temperature –20 °C to 70 °C Storage Temperature –30 °C to 80 °C Humidity Up to 95% non-condensing Vibration Resistance 5–500 Hz, 5G Hot-Swap Not supported (power off required) Key Features & Advantages 15 m cable designed for long-distance bus expansion up to 213 m total system run Built-in termination resistor ensures signal integrity at the end of the chain Continuous EMI shielding provides high immunity against electrical noise Rugged construction minimizes wiring errors and maintains reliable communication Fully compatible with all major Series 90‑30 CPUs and remote expansion racks Ideal for distributed control systems and complex automation networks Applications End-of-line expansion for remote I/O racks Long-distance signal transmission in PLC systems Industrial environments requiring high EMI protection Distributed control and automation applications FAQ Q: Can the cable be installed while the system is powered?A: No, the IC693CBL302 must be installed with the system powered off to ensure safety. Q: Is this cable compatible with all Series 90‑30 CPUs?A: Yes, it supports CPUs 331–341 (up to 4 expansion cables) and CPUs 350–374 (up to 7 expansion cables). Q: Why does it include a termination resistor?A: The built-in 100‑ohm resistor maintains proper signal integrity at the end of the I/O bus.
$200.00 $100.00
-
General Electric GE IC698CRE040 RX7i CPU Module with Redundant Ethernet
Product Description The IC698CRE040 is a high-speed CPU module for the GE/Emerson PACSystems RX7i platform, engineered for complex, large-scale industrial control systems. It functions as the central processor, executing user logic, managing local and remote I/O, coordinating communications, and supporting hot-standby redundancy for mission-critical applications. Equipped with a 1.8 GHz Pentium‑M processor, 64 MB battery-backed RAM, and 64 MB non-volatile flash memory, the IC698CRE040 delivers fast logic execution and reliable data storage. Dual 10/100 Mbps Ethernet ports enable redundant or segmented network configurations, while supporting SRTP, Modbus TCP, EGD, and serial protocols. Integration with the VME64 backplane allows compatibility with legacy RX7i and Series 90-70 modules. Designed for high-availability applications such as process automation, power generation, and transportation, this CPU module provides seamless switchover with hot-standby redundancy when paired with the IC698RMX016 Redundancy Memory Xchange module. Onboard web and FTP server functionality supports diagnostics and remote monitoring. Key Technical Specifications Parameter Specification Model IC698CRE040 Manufacturer GE Fanuc / Emerson Product Line RX7i PACSystems CPU Type Pentium‑M Clock Speed 1.8 GHz RAM 64 MB battery-backed Flash Memory 64 MB non-volatile Boolean Scan Rate 0.024 ms per 1000 contacts/coils Ethernet Ports 2× 10/100 Mbps RJ45 (redundant/segmented) Ethernet Protocols SRTP, Modbus TCP Server/Client, EGD Serial Ports RS‑232, RS‑485 (SNP, Modbus RTU Slave, Serial I/O) Station Manager Port 1× dedicated port Web/FTP Sessions Up to 16 simultaneous Backplane Standard VME64 (ANSI/VITA 1) Local I/O Capacity Up to 16 modules Redundancy Hot-standby supported (requires IC698RMX016) Switchover Time Instantaneous with redundancy module Power Requirements +5 VDC: 6.8 A; +12 VDC: 0.003 A; –12 VDC: 0.003 A Operating Temperature 0 °C to 60 °C Storage Temperature –40 °C to 85 °C Humidity 5–95% non-condensing Form Factor Single-slot RX7i module Weight 1.50 lbs Indicators Power, Run, Fault, Battery, Ethernet, Redundancy LEDs Functional Highlights High-speed 1.8 GHz Pentium‑M CPU for demanding control tasks Dual Ethernet ports for redundant or daisy-chain networking Supports SRTP, Modbus TCP, EGD, SNP, and Modbus RTU protocols Hot-standby redundancy for mission-critical operations VME64 backplane integration with RX7i and legacy Series 90-70 modules 64 MB RAM and 64 MB flash memory for large program execution Built-in web/FTP server for diagnostics, monitoring, and data retrieval Typical Applications Distributed control systems requiring high-speed logic execution Process automation in power generation, oil & gas, and transportation Redundant control architectures for critical uptime requirements Integration with existing RX7i or Series 90-70 PLC racks FAQ Q: Does the CPU support hot-standby redundancy?A: Yes, when used with the IC698RMX016 Redundancy Memory Xchange module. Q: Which protocols are supported for communication?A: SRTP, Modbus TCP Server/Client, EGD, SNP, Modbus RTU, RS‑232, RS‑485. Q: Can this module be integrated with legacy systems?A: Yes, the VME64 backplane allows compatibility with RX7i and Series 90-70 modules.
$200.00 $100.00
-
General Electric GE IC693CBL301 Series 90-30 2-Meter I/O Bus Expansion Cable
Product Description The IC693CBL301 is a 2-meter (6-foot) Wye-type I/O Bus Expansion Cable for GE Fanuc / Emerson Series 90-30 PLCs and PACSystems RX3i platforms. It extends the CPU baseplate’s I/O bus to expansion or remote baseplates, supporting daisy-chain configurations. Its robust Belden 8107 twisted-pair construction combined with continuous foil-and-braid EMI shielding ensures reliable, noise-immune communication even in harsh industrial environments. The cable features a single 25-pin D-Sub male connector on one end and a dual 25-pin D-Sub connector (male + female) on the other, allowing chaining of multiple expansion racks and proper termination at the last rack. Factory-grade construction reduces wiring errors and simplifies system expansion. Key Technical Specifications Parameter Specification Model IC693CBL301 Manufacturer GE Fanuc / Emerson Product Line Series 90-30 Cable Type I/O Bus Expansion Cable (Wye/Y-type) Length 2 m (6–6.6 ft) Cable Construction Belden 8107 twisted-pair, 24 AWG tinned copper Shielding 100% continuous EMI shield (foil + braid) Nominal Impedance 100 Ω Voltage Rating 30 V AC/DC Current Rating 2 A per contact Temperature Rating –20°C to 80°C Weight 0.55 lbs Dimensions 263 × 58 × 28 mm Connector A Single 25-pin D-Sub male Connector B Dual 25-pin D-Sub (1 male + 1 female) Maximum Expansion Cables CPU 350–364: up to 7; CPU 331–341: up to 4 Max Expansion Distance 15 m (50 ft) to last expansion baseplate Max Remote Distance 213 m (700 ft) to last remote baseplate Termination Required at end of chain (IC693ACC307 or built-in in certain cables) System Compatibility Series 90-30 PLCs, PACSystems RX3i (with SBT module) Functional Highlights Reliable extension of I/O bus for Series 90-30 and RX3i systems Supports multi-rack daisy-chain expansion Industrial-grade shielding provides high immunity to EMI and electrical noise Plug-and-play D-Sub connectors simplify installation Rugged construction for harsh factory environments Typical Applications Expanding I/O capacity for GE Series 90-30 or PACSystems RX3i PLCs Connecting CPU baseplates to remote or additional expansion racks Retrofitting legacy PLC installations with minimal wiring errors High-integrity systems requiring shielded, noise-resistant connections FAQ Q: Can multiple IC693CBL301 cables be connected in series?A: Yes, up to 7 cables for CPU models 350–364 and up to 4 for CPUs 331–341, following expansion limits. Q: Is a terminator required?A: Yes, use IC693ACC307 at the last rack unless using cables with built-in termination. Q: What environments is this cable suitable for?A: Rated for –20°C to 80°C, suitable for industrial environments with EMI and vibration.
$200.00 $100.00
-
General Electric GE IC695CBL001 RX3i Energy Pack Connection Cable
Product Description The IC695CBL001 is a 0.91-meter (3-foot) Energy Pack Cable designed for the Emerson/GE PACSystems RX3i platform. It provides a secure connection between RX3i Energy Packs, such as IC695ACC400 or IC695EPU001, and compatible CPUs including CPE302, CPE305, and CPE310. This connection allows the Energy Pack to deliver stored energy during power loss, enabling the CPU to save critical data such as configuration files, process parameters, and user logic to non-volatile memory. Engineered for industrial reliability, the cable features straight-through wiring, industrial-grade shielding, and an integrated termination resistor for stable signal transmission in electrically noisy environments. Its compact design simplifies integration in control cabinets and ensures consistent operation in high-integrity systems. Key Technical Specifications Parameter Specification Model IC695CBL001 Manufacturer GE / Emerson Product Line PACSystems RX3i Cable Type Energy Pack Cable Length 0.91 m (3 ft) Conductor 24 AWG stranded Voltage Rating 24 VDC, 125 VDC, 120–240 VAC Current Rating Up to 3.8 A @ 95°C Wiring Straight-through end-to-end Termination Resistor Built-in EMI Shielding Industrial-grade for high-noise environments Operating Temperature 0°C to 60°C Compliance EU RoHS Directive 2011/65/EU Connector Type CPU and Energy Pack ports (8-pin male/female) Cable Construction Shielded with industrial insulation Energy Pack Compatibility IC695ACC400, IC695EPU001 CPU Compatibility IC695CPE302, CPE305, CPE310 Functional Highlights Ensures reliable energy transfer during power loss to prevent data corruption Connects RX3i Energy Packs to compatible CPUs securely Built-in termination resistor supports stable communication Shielded cable construction protects against EMI and industrial noise Compact 3-foot length ideal for cabinet-level connections Typical Applications Backup-power interface for PACSystems RX3i CPUs High-integrity industrial control systems requiring safe data storage during power interruptions Retrofit or maintenance of RX3i installations with Energy Packs FAQ Q: Can this cable be used with any RX3i CPU?A: It is compatible with RX3i CPUs that support Energy Pack connections, including CPE302, CPE305, and CPE310. Q: Does the cable include a termination resistor?A: Yes, the IC695CBL001 has a built-in termination resistor for reliable signal transmission. Q: What is the maximum operating temperature?A: The cable operates reliably from 0°C to 60°C (32°F to 140°F).
$200.00 $100.00
-
General Electric GE IC693MDL754 Series 90-30 32-Point DC Output Module
Product Description The IC693MDL754 from GE Fanuc (Emerson) is a 32-point DC sourcing output module designed for Series 90-30 and PACSystems RX3i PLC platforms. It provides two fully isolated groups of 16 outputs, allowing simultaneous operation at 12 VDC and 24 VDC. Each output can drive up to 0.75 A with fast switching, and built-in auto-recovery protection ensures reliable operation under short-circuit or overcurrent conditions. LED indicators offer real-time monitoring of output status and fault conditions. DIP switch configuration allows selection of default output behavior for enhanced system control. This module is engineered for industrial applications requiring robust DC output control, precise diagnostics, and fault-tolerant operation. Its compact form factor facilitates installation in tight control cabinets while maintaining high performance. Key Technical Specifications Parameter Specification Model IC693MDL754 Manufacturer GE Fanuc / Emerson Product Line Series 90-30 Module Type 32-point DC sourcing output Output Groups 2 isolated groups of 16 outputs Compatible Systems Series 90-30, PACSystems RX3i Dimensions 142 × 30 × 130 mm Weight 0.49 lbs Rated Voltage 12/24 VDC nominal Voltage Range 10.2–30 VDC Output Type Positive logic (sourcing) Output Current 0.75 A per point Inrush Current 3 A for 10 ms (no ESCP trip) Overcurrent Trip ~5 A typical per point Leakage Current ≤0.1 mA Voltage Drop ≤0.3 VDC Backplane Power 300 mA @ 5 VDC External Supply Current 72–132 mA per group Protection Short-circuit, overcurrent, overtemperature (auto-recovery) Status Indicators 32 LEDs (Green = ON, Yellow = Fault) Response Time ≤0.5 ms Thermal Derating Required above 42°C at 30 VDC load Isolation 1500 VAC, 1 minute (field ↔ backplane, group ↔ group) Operating Temp 0°C to 60°C Storage Temp –40°C to 85°C Functional Highlights 32 sourcing outputs capable of driving DC loads Two isolated groups for mixed-voltage operation Auto-recovery protection enhances reliability Configurable DIP switch allows Force Off or Hold Last State Terminal block detection prevents wiring errors Fast on/off response suitable for high-speed control Typical Applications DC output control for manufacturing automation Expanding Series 90-30 or RX3i PLC output capacity Systems requiring fault-tolerant, high-speed switching Cabinet installations with mixed 12/24 VDC loads FAQ Q: Can the IC693MDL754 handle both 12 VDC and 24 VDC outputs simultaneously?A: Yes, each isolated output group can operate at a different DC voltage, allowing mixed-voltage applications. Q: What happens if an output is short-circuited?A: The module features auto-recovery protection and will resume normal operation once the fault is cleared. Q: How are faults indicated?A: 32 LEDs provide status feedback—green for active outputs, yellow for faults.
$200.00 $100.00
-
General Electric GE IC693CBL300 Series 90-30 I/O Bus Expansion Cable
Product Description The IC693CBL300 from GE Fanuc (now Emerson Automation) is a factory-assembled I/O bus expansion cable engineered for Series 90-30 PLC systems. Designed with a Y-configuration, it enables seamless communication between a primary CPU baseplate and additional expansion or remote racks. With its fully shielded twisted-pair construction, this cable ensures consistent signal transmission and resistance to electromagnetic interference, making it suitable for electrically noisy industrial environments. The 1-meter length is optimized for cabinet-level interconnections, reducing installation complexity while maintaining signal integrity. Key Technical Specifications Parameter Specification Model IC693CBL300 Manufacturer GE Fanuc / Emerson Product Series Series 90-30 Cable Type I/O Bus Expansion Cable (Wye / Y-type) Length 1 m (3.3 ft) Conductor 24 AWG tinned copper (twisted pair) Cable Type Reference Belden 8107 equivalent Shielding Dual-layer (foil + braid, full coverage) Connector A 25-pin D-Sub male Connector B Dual 25-pin D-Sub (1 male + 1 female) Voltage Rating 30 V AC/DC Current Rating 2 A per contact Impedance 100 Ω nominal Insulation Resistance ≥10 MΩ Dielectric Strength 2000 V Propagation Velocity ~70% Operating Temperature -25°C to +85°C Weight 0.24 lbs System Compatibility Series 90-30 PLC, RX3i (via SBT module) Lifecycle Status Obsolete / Legacy (available via surplus channels) Functional Overview The IC693CBL300 serves as a communication bridge within the PLC I/O architecture: Extends the I/O bus from the CPU rack to additional baseplates Supports multi-rack configurations using a daisy-chain topology Transfers both control data and bus power across connected racks Maintains signal stability in high-noise environments due to full shielding System expansion limits depend on the CPU type, typically supporting multiple racks within defined cable distance constraints. Installation & System Considerations Maximum distance for local expansion racks: up to 15 meters total Remote rack configurations can reach up to approximately 213 meters Requires external bus termination (e.g., IC693ACC307) when not integrated Recommended for use with factory cables to avoid signal mismatch or wiring errors Typical Applications Expansion of PLC I/O capacity in manufacturing lines Distributed control systems requiring multiple baseplates Retrofit or maintenance of legacy GE Series 90-30 installations Control cabinets where short, reliable interconnects are needed FAQ Q: Can this cable be used with newer Emerson RX3i systems?A: Yes, but only when used with a Serial Bus Transmitter (SBT) module to interface with the RX3i platform. Q: Is this cable suitable for long-distance communication?A: For short cabinet-level connections, it is ideal. For longer distances, ensure total bus length complies with system limits. Q: Does the cable include termination?A: No, an external terminator is required unless termination is integrated elsewhere in the system.
$200.00 $100.00
-
General Electric GE Fanuc IC697PCM711 Programmable Coprocessor Module Series 90-70
Product Description The IC697PCM711 is a dedicated programmable coprocessor module engineered for the GE Fanuc Series 90-70 PLC platform. It is intended to execute computation-intensive or time-sensitive tasks independently of the main CPU, improving overall system responsiveness and determinism. Built around an Intel 80C186 processor running at 12 MHz, the module provides substantial local processing capability and supports concurrent task execution. A user-developed MegaBasic application can run in parallel with communication services, making it suitable for advanced data handling, operator interface logic, and custom control strategies. The module communicates with the host PLC via the backplane and operates autonomously once deployed, without requiring continuous CPU intervention. Multiple modules can be installed within the same rack for distributed processing architectures. Key Features Dedicated coprocessor for offloading PLC CPU tasks Intel 80C186 processor at 12 MHz Dual-task execution: user application and communication handling MegaBasic programming environment for flexible development Two configurable serial ports (RS-232 / RS-422 / RS-485) Battery-backed memory for data retention Front-panel control buttons for reset and restart Supports multiple modules per system Technical Specifications Processor & Performance CPU: Intel 80C186 Clock Speed: 12 MHz Processing Capability: Comparable to legacy industrial PC-class performance Tasking: Dual-tasking (application + communication) Memory Onboard Memory: Up to 96 KB CMOS (battery-backed) Expansion Options: 64 KB (IC697MEM713) 128 KB (IC697MEM715) 256 KB (IC697MEM717) 512 KB (IC697MEM719) Battery Type: Lithium Shelf Life: Approx. 10 years at 20 °C Data Retention: Up to 6 months without external power Communication Interfaces Ports: 2 serial communication ports Electrical Interface: RS-232 / RS-422 / RS-485 (configurable) Baud Rates: Up to 9.6 kbps (dual-port operation) Up to 19.2 kbps (single port) Protocol: CCM2 Programming & Configuration Programming Language: MegaBasic Development Tools: IC647 PCM Development System, IC640 software Platform: IBM-compatible PC (XT/AT class) Configuration: Software-based (no hardware switches) Indicators & Controls LEDs: OK, USER 1, USER 2 Pushbuttons: Application restart Module stop/reset Electrical & Mechanical Backplane Current: 1.0 A @ 5 VDC Slot Requirement: Single slot Weight: 1.1 lbs Environmental Designed for industrial cabinet installation Long-term memory retention supported by battery backup Functional Capabilities The IC697PCM711 operates independently from the PLC CPU and can execute: Real-time mathematical processing Data acquisition and buffering Serial communication management Operator interface logic Data logging and storage Custom algorithm execution Applications High-speed data processing in PLC systems Protocol conversion and serial communications Operator interface and supervisory functions Complex algorithm execution beyond standard PLC capability Distributed processing in large automation systems FAQ Q: Does the IC697PCM711 reduce CPU load?A: Yes, it offloads computation and communication tasks, allowing the main PLC CPU to focus on core control logic. Q: Can multiple PCM modules be used in one rack?A: Yes, multiple units can operate in the same system for scalable processing. Q: How is application logic developed?A: Using MegaBasic with GE Fanuc PCM development tools on a compatible PC. Q: What happens if power is lost?A: Battery-backed memory preserves application data for several months without power.
$200.00 $100.00
-
General Electric GE Fanuc IC693BEM341 2.5 MHz FIP Bus Controller Series 90‑30
Product Description The IC693BEM341 is a high-performance FIP (Factory Instrumentation Protocol) Bus Controller designed for GE Fanuc Series 90‑30 PLCs. This single-slot module delivers deterministic, high-speed communication at 2.5 MHz between the PLC and distributed FIP network devices, including I/O blocks, drives, controllers, and remote PLCs. Equipped with two 9‑pin FIP network ports and an RS‑485 port for firmware upgrades, the module supports operational Modes 11, 20, and 30. These modes enable redundancy management, slave-device monitoring, synchronous messaging, and Boolean time-stamping for up to 1024 values. Front-panel LEDs provide real-time diagnostics including module status, RUN state, carrier detection (CD1/CD2), and transmission enable (TEN1/TEN2), simplifying troubleshooting and system monitoring. Key Features High-speed FIP communication at 2.5 MHz Single-slot installation in Series 90‑30 baseplates Two 9-pin D-shell FIP connectors for network devices RS‑485 port for firmware upgrades Supports operational Modes 11, 20, 30 with redundancy and synchronous messaging Boolean value time-stamping for advanced data logging Compatible with Series 90‑30 CPUs (firmware 8.10+) and Series 90‑70 PLCs Front-panel LEDs: Module OK, RUN, CD1/CD2, TEN1/TEN2 Technical Specifications Communication Protocol: Factory Instrumentation Protocol (FIP) Fixed Data Rate: 2.5 MHz Ports: Two 9-pin D FIP connectors; One RS‑485 port Supported Modes: 11, 20, 30 (DIP-switch configurable) Functions: Redundancy, slave-device monitoring, synchronous messaging, Boolean time-stamping Electrical Backplane Power: Typical 800 mA @ 5 VDC; Maximum 1.2 A @ 5 VDC Slot Width: Single-slot Indicators LEDs: Module OK, RUN, CD1, CD2, TEN1, TEN2 Mechanical Dimensions: 100 × 127 × 60 mm (typical) Weight: 0.75 lbs Mounting: Slot 1 of Series 90‑30 baseplate Environmental Operating Temperature: 0–55 °C Storage Temperature: –25–70 °C Humidity: 5%–95% non-condensing Vibration: 0.2-inch displacement (5–10 Hz) Ingress Protection: IP20 Applications Distributed I/O networks for PLC systems CNC and servo drive integration Redundant control system architectures High-speed deterministic data exchange Multi-controller synchronization and monitoring FAQ Q: Can this module support redundancy?A: Yes, operational Modes 20 and 30 allow redundant network setups and fault-tolerant operation. Q: What devices are compatible with IC693BEM341?A: Compatible with Series 90‑30 CPUs (firmware 8.10+), Series 90‑70 PLCs, I/O blocks, drives, and FIP-enabled control devices. Q: How is firmware updated?A: Via the RS‑485 port on the module, using supported configuration tools. Q: What is the maximum number of Boolean values supported for time-stamping?A: Up to 1024 Boolean values can be time-stamped for logging and diagnostics.
$200.00 $100.00
-
General Electric GE Fanuc IC693MDL732 8-Point 12/24 VDC Output Module Series 90‑30
Product Description The IC693MDL732 is a DC output module for the GE Fanuc Series 90‑30 PLC family, providing 8 discrete positive logic outputs in a single module. It is designed for sourcing current to field devices, enabling reliable operation of relays, solenoids, lamps, indicators, and motor starters. Each output point is equipped with a dedicated LED status indicator, offering clear visual feedback. The module features full optical isolation between the logic circuitry and field side, ensuring robust noise immunity and protecting both the PLC and connected devices. Its compact design allows installation in any standard Series 90‑30 baseplate slot. Key Features 8 positive logic (sourcing) DC outputs with a shared common terminal Supports 12–24 VDC loads with 0.5 A per point and 2 A per common terminal Inrush handling: 4.78 A for 10 ms Full optical isolation (1.5 kV) between field and logic sides Dedicated green LED indicators for each output point Fast switching response: ≤ 2 ms on/off Compact single-slot design for Series 90‑30 baseplates Blue low-voltage label for easy identification Technical Specifications Electrical Rated Voltage: 12/24 VDC Output Voltage Range: 12–24 VDC (+20%, –15%) Outputs: 8 discrete points (one group) Maximum Output Current: 0.5 A per point, 2 A per common Inrush Current: 4.78 A (10 ms) Voltage Drop: ≤ 1 V Off-State Leakage: ≤ 1 mA Response Time: ≤ 2 ms (on/off) Isolation: 1.5 kV between field and logic Indicators 8 green LEDs for individual output status Arranged in two rows labeled A1–A8 and B1–B8 Mechanical Dimensions: 150 × 100 × 70 mm Weight: 1.7 lbs Country of Origin: USA Terminal Block: Removable for easy field wiring Environmental Operating Temperature: 0–60 °C Storage Temperature: –40–85 °C Humidity: 5–95% non-condensing Vibration: 5–2000 Hz @ 1 g Installation & Compatibility Fits any I/O slot on 5‑slot or 10‑slot Series 90‑30 baseplates No onboard fuses required Blue-coded low-voltage identification Compatible with GE Fanuc Series 90‑30 PLCs Applications Factory automation and process control Material handling and conveyor systems Water treatment control systems Oil & gas wellhead automation Auxiliary control of DC relays, solenoids, lamps, and motor starters FAQ Q: Can IC693MDL732 handle inductive loads like solenoids?A: Yes, it supports DC solenoids, relays, and motor starters with inrush up to 4.78 A for 10 ms. Q: Does the module require external fuses?A: No, the module is designed to operate safely without external fuses, relying on its internal protection and isolation. Q: How is output status monitored?A: Each output has a dedicated green LED that displays real-time ON/OFF status for clear diagnostics. Q: What is the response time for switching?A: Both ON and OFF switching times are ≤ 2 ms, ensuring fast and precise control of field devices.
$200.00 $100.00
-
Yokogawa Yokogawa AIP578 | Analog Input Module | 8 Channels
Product Description: The Yokogawa AIP578 is a high-performance analog input module designed for use within the Yokogawa CENTUM VP and CENTUM CS 3000 Distributed Control Systems (DCS). This module is part of the Field Input/Output (FIO) family and is specifically engineered for isolated current input applications. The AIP578 is ideal for environments where field devices operate with different ground potentials or when high signal integrity is crucial to avoid ground loops. The module offers channel-to-channel isolation, distinguishing it from conventional modules that use a common ground. This module is built for accuracy and reliability, providing 8 input channels with a range of 4 to 20 mA DC. Its 250 Ω internal shunt ensures precise current measurements, while ±0.1% accuracy guarantees high performance across applications. The AIP578 is highly resistant to electrical interference with a 500 V AC isolation voltage between channels and a 1500 V AC isolation between the system and the field devices. The data refresh cycle of 10 ms ensures real-time processing, making it suitable for fast and demanding control systems. Additionally, the module's maximum current consumption is 450 mA when powered from a 5 V DC backplane. Key Features: Model Number: AIP578 Module Type: Analog Input Module (Current) Number of Channels: 8 Channels (Channel-to-Channel Isolation) Input Signal Range: 4 to 20 mA DC Input Impedance: 250 Ω (Internal shunt) Accuracy: ±0.1% of full span Isolation Voltage: 500 V AC (Channel-to-Channel), 1500 V AC (System-to-Field) Data Refresh Cycle: 10 ms Current Consumption: Max. 450 mA (5 V DC from backplane) Mounting: Installs in ANB10, ANB11, or ANT10 FIO units
$200.00 $100.00
-
Yokogawa Yokogawa AIP171 | Analog Input Module (Current) | 16 Channels
Product Description: The Yokogawa AIP171 is an advanced analog input module designed to seamlessly integrate with the Yokogawa CENTUM VP and CENTUM CS 3000 Distributed Control Systems (DCS). This high-density module is engineered to handle current input signals, typically from 2-wire or 4-wire transmitters, ensuring precise data conversion for use in demanding industrial applications. As a part of the Field Input/Output (FIO) system, it transforms 4 to 20 mA field signals into reliable digital data for process control, offering high accuracy and system reliability. This module supports up to 16 input channels, each non-isolated from the others, and provides a 250 Ω internal shunt resistor to accurately measure current. With system isolation of 1500 V AC, it protects the system from electrical interference, ensuring stable operation in complex control environments. The AIP171 module operates with a data refresh cycle of just 10 ms per channel and has a max current consumption of 450 mA (at 5V DC from the backplane), making it a suitable solution for high-speed, high-reliability requirements. Key Features: Model Number: AIP171 Module Type: Analog Input Module (Current Input) Number of Channels: 16 Channels (Non-isolated between channels) Input Signal Range: 4 to 20 mA DC Input Impedance: 250 Ω (Internal shunt resistor) Accuracy: ±0.1% of full span System Isolation: 1500 V AC (Between field and system bus) Data Refresh Cycle: 10 ms Current Consumption: Max. 450 mA (5 V DC from backplane) Mounting: Compatible with ANB10, ANB11, or ANT10 FIO units
$200.00 $100.00
-
General Electric GE Fanuc IC693TCM302 8-Channel Temperature Control Module
Product Description The IC693TCM302 is an 8-channel Temperature Control Module (TCM) designed for the GE Fanuc Series 90‑30 PLC. It combines precise thermocouple measurement with PWM relay output control, enabling both closed-loop PID and open-loop temperature regulation across eight independent zones in a single slot. This module supports multiple thermocouple types, features automatic cold-junction compensation, and provides comprehensive diagnostics including open-thermocouple detection, reverse-polarity protection, and out-of-tolerance alarms. Its high-speed PWM outputs allow efficient control of heaters, ovens, and other temperature-dependent processes. Key Features 8 independent thermocouple input channels with 12-bit resolution PWM relay outputs per channel for precise temperature control Closed-loop PID and open-loop manual control modes Automatic cold-junction compensation for accurate measurements Comprehensive diagnostics: open thermocouple, reverse polarity, out-of-tolerance alarms Front-panel LED indicators: PWR, RUN, FAULT, SHORT, plus 8 output status LEDs Single-slot installation in Series 90‑30 baseplates Technical Specifications Inputs Channels: 8 thermocouples Supported Types: J, K, L (some models R, S, B, T, E, N) Resolution: 12-bit (~0.2 °C) Accuracy: ±1 °C with auto-calibration Temperature Ranges: J: 0–450 °C K: 0–600 °C L: 0–450 °C Thermocouple Impedance: Max 30 Ω Cold Junction: 1 RTD channel or external reference Outputs Channels: 8 PWM relay outputs Voltage: 18–30 VDC Load Current: 100 mA per channel Off-State Leakage: 0.1 mA max PWM Period: 0.1–60 s programmable Overload Threshold: 700 mA typical (≥2 ms) Power Requirements Backplane Power: 150 mA @ +5 VDC External Power: 18–36 VDC for outputs (2.5 A inrush) Internal Fuse: 2 A, 125 V Mechanical & Environmental Dimensions: 127 × 76.2 × 152.4 mm (5 × 3 × 6 in) Weight: 0.24 lbs Mounting: Single-slot Series 90‑30 baseplate Operating Temp: 0–55 °C Storage Temp: –40–85 °C Humidity: 5–95% non-condensing Protection Class: IP20 Applications Multi-zone industrial temperature control Plastics molding and extrusion Ovens, kilns, and furnaces Packaging and sealing machinery Food processing and precise thermal regulation FAQ Q: Can the IC693TCM302 handle all thermocouple types?A: It supports J, K, L thermocouples natively; related models may support R, S, B, T, E, N types. Q: How is temperature output controlled?A: Each channel uses PWM relay outputs, configurable for 0.1–60 s periods, suitable for heaters or valves. Q: Can this module operate in open-loop mode?A: Yes, open-loop manual control is supported alongside PID closed-loop control. Q: What diagnostics are included?A: Detects open thermocouples, reverse connections, out-of-tolerance conditions, and output shorts.
$200.00 $100.00
-
General Electric GE Fanuc IC693BEM320 Series 90‑30 I/O LINK Slave Interface Module
Product Description The IC693BEM320 is a dedicated I/O LINK Interface Module (Slave) for the GE Fanuc Series 90‑30 PLC family. Designed for high-speed serial communication, it connects a Series 90‑30 PLC to a Fanuc I/O LINK master, commonly found in Fanuc CNC systems or Series 90‑70 PLCs. The module functions strictly as a slave, enabling deterministic I/O exchange for critical automation tasks. Configuration is straightforward, with an internal jumper allowing selection between 32-point or 64-point I/O operation. Multiple IC693BEM320 modules can operate on the same network (up to 16 slaves per master), making it ideal for distributed control and CNC integration. Key Features Slave-only I/O LINK interface for high-speed serial communication Jumper-selectable I/O capacity: 32 or 64 points Supports up to 16 slave devices per I/O LINK master Dual communication ports: RS‑485 and RS‑422 Front-panel LED indicators for module status (OK) and readiness (RDY) Backplane-powered (5 VDC), occupies a single slot Compact design: 64 × 127 × 102 mm, weight approx. 0.31 kg Technical Specifications Functional Overview Function: I/O LINK serial interface (slave) Supported PLCs: GE Fanuc Series 90‑30, Series 90‑70 Network: Fanuc proprietary I/O LINK Max Slaves: 16 per network (1 master + up to 16 slaves) Communication Ports: 2 Port Types: RS‑485, RS‑422 Purpose: High-speed data exchange with I/O LINK master Indicators LEDs: OK (powered/functioning), RDY (module ready/active) Electrical Power Supply: 5 VDC from PLC backplane Backplane Slots Required: 1 Mechanical Dimensions: 64 × 127 × 102 mm (alternate: 11.2 × 6.5 × 11 cm) Weight: 0.64 lbs Origin: USA Environmental Operating Temperature: 0°C to 60°C (32°F to 140°F) Humidity: 5–95% non-condensing Recommended: Climate-controlled enclosure for harsh environments Applications Fanuc CNC system integration with Series 90‑30 PLC Distributed I/O systems requiring fast and reliable communication PLC-to-CNC deterministic I/O exchange Industrial automation projects demanding high-speed serial interface FAQ Q: Can the IC693BEM320 operate as a master module?A: No, this module functions strictly as a slave device. Q: How do I select the I/O capacity?A: Use the internal jumper to choose either 32-point or 64-point operation. Q: How many IC693BEM320 modules can I use on one network?A: Up to 16 slave modules can be connected to a single I/O LINK master. Q: Which PLCs are compatible with this module?A: Series 90‑30 and Series 90‑70 GE Fanuc PLCs.
$200.00 $100.00
-
General Electric GE Fanuc IC693APU302 Series 90‑30 2-Axis Motion Positioning Module
Product Description The IC693APU302 is a high-performance 2-axis Axis Positioning Module (APM) for the GE Fanuc Series 90‑30 PLC platform. It integrates intelligent servo control with PLC logic execution, enabling precise, synchronized motion for applications requiring multi-axis coordination. The module operates in Standard Mode for full motion control with PLC logic or Follower Mode for electronic gearing in master/slave configurations. Designed for direct communication with servo drives and machine hardware, the IC693APU302 offloads motion control tasks from the CPU, improving system performance and responsiveness. Its flexible programming, high-resolution feedback, and configurable I/O make it suitable for packaging, labeling, pick-and-place, and CNC-style motion control. Key Features Supports 2 independent motion axes with high-resolution control Standard Mode for full motion control + PLC logic Follower Mode for synchronized electronic gearing Servo loop update rate: 2 milliseconds High-resolution positioning: ±8,388,607 user units Velocity and acceleration ranges up to 8,388,607 and 134,217,727 user units/sec² Non-volatile memory stores up to 10 motion programs, including “Program Zero” Front panel 24-pin high-density connectors for axes; additional communication port Supports A-Quad-B encoder feedback up to 175 kHz LED indicators: EN1, EN2, STAT, OK, CFG Technical Specifications Motion Control Axes: 2 independent Operating Modes: Standard, Follower Servo Loop Update: 2 ms Block Processing Time: < 5 ms Position Resolution: ±8,388,607 user units Velocity Range: 1–8,388,607 user units/sec Acceleration Range: 1–134,217,727 user units/sec² Programming & Configuration Software: Logicmaster 90‑30, VersaPro Instruction Set: High-level motion commands Motion Programs: Up to 10 stored in non-volatile memory Connectivity & I/O Axis Connectors: 2 × 24-pin high-density Communication Port: 9- or 25-pin depending on revision Compatible Cables: IC693CBL311, IC693CBL319, IC693CBL317, IC693CBL320 Terminal Block: Weidmuller RD25 910648 or equivalent Analog Outputs: ±10 V velocity command Analog Inputs: 12-bit signed feedback Digital Inputs: Home switch, overtravel limits, 8 user-defined inputs Digital Outputs: 4 user-defined outputs CPU & System Compatibility Supported CPUs: Embedded (311, 313, 323), Modular (331+) Max Modules: 3 APM per embedded CPU, 8 per modular CPU (max 3 per baseplate) Installation: Any Series 90‑30 CPU, expansion, or remote baseplate Physical & Electrical Dimensions: 64 × 127 × 102 mm Weight: 0.57 lbs Slot Width: Single-slot Current Draw: 800 mA @ 5 VDC Environmental Operating Temperature: Industrial range Feedback Support: Encoder A-Quad-B up to 175 kHz Applications Multi-axis servo control High-speed packaging and labeling machinery Pick-and-place systems Electronic gearing and synchronized motion CNC-style precision positioning FAQ Q: How many axes can the IC693APU302 control simultaneously?A: The module supports 2 independent motion axes. Q: What modes of operation are available?A: Standard Mode for full motion control with PLC logic and Follower Mode for electronic gearing. Q: Which CPUs are compatible with this module?A: Embedded CPUs 311, 313, 323, and modular CPUs 331 and higher. Q: Can it handle high-resolution motion?A: Yes, with ±8,388,607 user units of positional resolution and high-speed servo loop updates.
$200.00 $100.00
-
General Electric GE Fanuc IC693CBL303 Series 90‑30 Programmer & Converter Cable
Product Description The IC693CBL303 is a dedicated programming and converter cable for the GE Fanuc Series 90‑30 PLC family. It serves as the primary interface between the IC693PRG300 Hand-Held Programmer (HHP) and the PLC’s 15‑pin serial port, providing reliable communication, power delivery, and automatic detection of the programmer. This cable also facilitates connection between the PLC’s RS‑422/RS‑485 ports and the IC690ACC900 RS‑232 converter, allowing flexible field programming, monitoring, and maintenance. Built with industrial-grade shielding and connectors, it ensures consistent signal integrity in harsh environments. Key Features Directly connects IC693PRG300 HHP to Series 90‑30 PLCs Supplies power to the HHP via internal conductors Automatically signals the PLC that a programmer is attached Supports connection to IC690ACC900 RS‑232 converter EMI/RFI-shielded construction for industrial environments Plug-and-play with standard 15‑pin D-sub connectors Ideal for field programming, diagnostics, and maintenance Technical Specifications Cable Construction Cable Type: Belden 9508 shielded cable Conductor Size: 24 AWG (0.22 mm²), stranded copper Shielding: EMI/RFI protection Connectors Connector Type: Canon DA15S (15‑pin male D‑Sub) Connector Hood: AMP 207470‑1 Hardware Kit: AMP 207871‑1 (includes screws and clips) Electrical & Power Voltage Rating: Up to 30 VDC Current Capacity: 1 A per conductor Power to HHP: Yes (via cable) Physical & Mechanical Cable Length: 6 ft (2 m) Weight: 0.96 lbs Color: Gray Country of Origin: USA Environmental Ratings Operating Temperature: 0°C to 60°C Humidity: 5–95% non-condensing Applications Field programming of Series 90‑30 PLCs HHP-to-PLC communication Connecting PLC RS‑422/RS‑485 ports to RS‑232 converters Industrial automation maintenance and diagnostics FAQ Q: Does this cable supply power to the Hand-Held Programmer?A: Yes, the IC693CBL303 provides power to the IC693PRG300 HHP through its internal conductors. Q: Can it connect the PLC to an RS‑232 converter?A: Yes, it supports RS‑422/RS‑485 to RS‑232 conversion with the IC690ACC900. Q: Is it suitable for harsh industrial environments?A: Yes, it uses EMI/RFI-shielded construction and robust D-sub connectors for reliable field use.
$200.00 $100.00
-
General Electric GE Fanuc IC693PRG300 Series 90‑30 Hand-Held Programmer HHP
Product Description The IC693PRG300 is a portable hand-held programming device for the GE Fanuc Series 90‑30 PLC family. It provides field engineers and technicians with a direct interface to create, edit, debug, and monitor PLC logic using Statement List (STL) language. The device connects via a 15‑pin D‑type cable (IC693CBL303) that supplies power while signaling the PLC that an HHP is attached, eliminating the need for communication parameter configuration. This programmer supports multiple operational modes, enabling full on-site diagnostics, logic modification, and I/O parameter adjustments. Its compact design, tactile keypad, and LCD display make it ideal for portable programming and maintenance tasks. Key Features Supports Statement List (STL) programming language Compatible with GE Fanuc Series 90‑30 PLCs Operates in Program, Protection, Data, and Configuration modes Non-volatile internal memory with optional expansion via IC693ACC303 (for CPUs 311–341) Connects directly to the CPU’s serial port with hot-plug capability 42-key sealed tactile keypad and 2×16 character LCD display Powered entirely through the PLC serial cable, no batteries required Rugged design suitable for industrial field use Technical Specifications Functional & Communication Programming Language: STL Supported PLCs: Series 90‑30 Modes of Operation: Program, Protection, Data, Configuration Memory Type: Non-volatile, expandable via IC693ACC303 card Communication: 15‑pin D‑type serial connector, hot-plug capable Communication Parameter Setup: Not required User Interface Keypad: 42 tactile keys (6×7 matrix) Display: 2-line × 16-character LCD Mechanical & Physical Dimensions: 22.44 × 8.89 × 10.00 cm (alternate: 180 × 110 × 30 mm) Weight: 0.75 lbs Origin: USA Power & Electrical Power Source: Supplied through PLC serial cable Battery Life: Not applicable; powered directly by PLC Environmental Designed for industrial field applications Suitable for portable programming and on-site diagnostics Typical Applications Field programming and on-site PLC logic updates I/O module configuration Real-time monitoring and debugging of Series 90‑30 systems Access control via Protection Mode Reference table monitoring and adjustment FAQ Q: Do I need to configure communication settings to use the HHP?A: No, the IC693PRG300 automatically communicates with the PLC without parameter setup. Q: Can the memory be expanded?A: Yes, memory expansion is available via IC693ACC303 card for compatible CPU models. Q: What modes are available for field operation?A: Program, Protection, Data, and Configuration modes are supported. Q: Is the programmer portable for field use?A: Yes, its compact design and cable-powered operation make it ideal for portable field programming.
$200.00 $100.00
-
General Electric GE Fanuc IC693APU305 Series 90‑30 High-Speed I/O Processor Module
Product Description The IC693APU305 is a high-performance I/O processor module designed for GE Fanuc Series 90‑30 PLCs, providing independent, fast I/O processing for demanding industrial applications. With a dedicated processor onboard, this module offloads high-speed input/output operations from the main CPU, delivering deterministic timing for pulse counting, motion control, event capture, and synchronized processes. This module enables rapid response control without waiting for the CPU scan cycle, making it ideal for packaging, labeling, material handling, and high-frequency monitoring tasks. Key Features Dedicated I/O processor for independent input/output logic execution High-speed digital input and output processing with microsecond-level refresh 32-bit total counts register for pulse and event tracking Configurable outputs with fuse protection and positive logic signaling Six green LEDs for module, output, and configuration status Optically and galvanically isolated I/O for noise and surge immunity Compact design compatible with any Series 90‑30 baseplate slot Compatible with Logicmaster 90‑30, VersaPro, and HHP programming Technical Specifications Electrical & Input/Output Digital Inputs: 12 channels Input Voltage: 5 VDC TTL or 10–30 VDC industrial signals Input Type: Positive logic, high-speed pulse compatible Input Frequency: 50–60 Hz (AC-type signals) Digital Outputs: 8 channels Output Current: 4 outputs @ 1 A, 4 outputs @ 0.5 A (configurable) Output Type: Positive logic, fuse-protected Power Supply: 5 VDC via PLC backplane Performance & Processing Update Speed: 500 microseconds Total Counts Register: 32-bit Pulse Length & Interval Measurement: Millisecond resolution Data Registers: 4 pass-through registers CPU Communication: 32 discrete inputs (%I), 32 discrete outputs (%Q), 15 analog input words (%AI), 6 analog output words (%AQ) Mechanical & Environmental Dimensions: 64 × 127 × 102 mm (alternate: 10.25 × 8.2 × 8 cm) Weight: 0.8 lbs Operating Temperature: 0–60 °C (32–140 °F) Humidity: Up to 95% non-condensing Isolation: Optical and galvanic protection Indicators Six LED indicators for module status, output status, and configuration confirmation Typical Applications High-speed motion control Pulse counting and frequency measurement Event capture and process synchronization Packaging, labeling, and marking systems Bulk material handling and processing FAQ Q: Can the IC693APU305 handle independent logic without CPU intervention?A: Yes, it has an onboard processor that executes user-defined logic directly on the module. Q: What input voltage types are supported?A: Supports 5 V TTL and 10–30 V industrial signals, both positive logic. Q: Is the module protected against electrical noise?A: Yes, I/O channels are optically and galvanically isolated. Q: How is the module configured?A: Using Logicmaster 90‑30, VersaPro, or a Hand-Held Programmer; no DIP switches needed.
$200.00 $100.00
-
General Electric GE Fanuc IC693CPU352 Series 90‑30 CPU Module for High-Speed PLC
Product Description The IC693CPU352 is a single-slot CPU module for the GE Fanuc Series 90‑30 PLC platform, designed for medium-to-large automation systems requiring high-speed logic, floating-point calculations, and extensive I/O support. Utilizing an Intel 80386EX processor at 25 MHz, this module offers fast scan rates, flexible memory configuration, and multiple serial communication options. Its compact single-slot design maximizes available rack space for I/O or expansion modules. Key Features Single-slot CPU module, supports up to 8 baseplates (1 CPU + 7 expansion/remote) 80386EX processor at 25 MHz for high-speed execution Hardware floating-point math co-processor for intensive calculations Three built-in serial ports supporting SNP/SNP‑X, RTU master/slave, and general serial I/O Configurable memory up to 240 KB user program memory (firmware ≥9.0) Extensive diagnostics with battery-backed clock and Flash memory High-capacity I/O: 2,048 discrete inputs/outputs, up to 32,640 analog points Technical Specifications Processor & Performance Processor: Intel 80386EX Clock Speed: 25 MHz Typical Scan Rate: 0.22 ms per 1K Boolean logic Floating-Point Math: Hardware-based Memory User Program Memory: Up to 240 KB Register Memory (%R): 128–32,640 words Internal Coils (%M): 4,096 bits Temporary Coils (%T): 256 bits Global Memory (%G): 1,280 bits System Status (%S): 128 bits I/O Capacity Discrete Inputs (%I): 2,048 points Discrete Outputs (%Q): 2,048 points Analog Inputs (%AI): Up to 32,640 words Analog Outputs (%AQ): Up to 32,640 words Timers/Counters: >2,000 Communication Ports Power Supply Port: SNP/SNP‑X slave Port 1 (RS‑232): SNP/SNP‑X master/slave, RTU slave, Serial I/O Port 2 (RS‑485): Same as Port 1; supports multidrop networks Optional modules for Ethernet, Profibus, FIP, GBC, and GCM+ Power & Environmental Backplane Current: 890 mA @ +5 VDC Operating Temperature: 0–60 °C (32–140 °F) Weight: 0.71 lb Typical Applications Medium to large-scale industrial automation systems High-speed logic operations with floating-point processing requirements Multi-rack distributed I/O systems Environments requiring robust serial and optional Ethernet communication FAQ Q: How many baseplates can IC693CPU352 support?A: It supports up to 8 baseplates—1 CPU plus 7 expansion or remote I/O baseplates. Q: Does it support floating-point calculations?A: Yes, it has a hardware-based floating-point math co-processor for intensive computations. Q: What types of serial communications are available?A: Three built-in ports support SNP/SNP-X, RTU master/slave, and general serial communications. Q: Can memory be expanded?A: Yes, user memory is configurable up to 240 KB, with flexible register and coil assignments.
$200.00 $100.00
-
General Electric GE Fanuc IC695ACC302 RX3i Auxiliary Smart Battery Module
Product Description The IC695ACC302 is an advanced auxiliary battery module for PACSystems RX3i and RX7i CPUs, providing extended backup for volatile RAM memory. Its integrated smart monitoring circuitry allows the CPU to detect low battery conditions early, preventing unexpected data loss. Designed for long-term reliability, this module replaces standard coin-cell or lithium backup batteries and connects directly to the CPU with the included enabling adapter cable. Key Features Extends RAM backup time up to 200 days depending on CPU load and ambient temperature Smart monitoring circuit provides early Low Battery detection Uses a 3-cell lithium battery pack (3 VDC, 15 Ah) with a long shelf life (~7 years at 20°C) Includes internal 1‑amp fuse for protection against short circuits or overload Connects via 4-pin female JAE connector with included enabling adapter cable External mounting module, compatible with RX3i and RX7i CPU battery terminals Must be installed after CPU is powered ON to maximize battery life Technical Specifications Battery Characteristics Battery Type: 3-cell lithium pack Output Voltage: 3 VDC Capacity: 15 Ah Lithium Content: 5.1 g total (1.7 g per cell) Shelf Life: ~7 years at 20°C Total Backup Time: 23–200 days (dependent on CPU and operating conditions) Mechanical & Physical Dimensions: 145.1 × 65.0 × 39.9 mm (5.713 × 2.559 × 1.571 in) Weight: 0.74 lb Housing Material: Flame-retardant ABS Connector: 4-pin female JAE Included Cable: 4-pin enabling adapter cable (male-to-female) Environmental Operating Temperature: 0°C to +60°C Storage Temperature: Recommended 20°C for long-term shelf life Hazardous Locations: Not for use in explosive or hazardous environments Safety & Protection Internal 1‑amp sealed fuse (non-serviceable) Do not short-circuit, crush, disassemble, or expose to fire Follow MSDS and proper battery disposal guidelines Installation Notes Install the battery only after CPU power-on Disconnect enabling cable when not in use to preserve battery life Replace existing RAM backup batteries when installing this module Typical Applications Extended volatile memory backup for RX3i and RX7i CPUs Critical process control systems requiring uninterrupted RAM data retention Systems where early low-battery alerts improve operational reliability FAQ Q: What CPUs are compatible with IC695ACC302?A: Compatible with PACSystems RX3i and RX7i series CPUs. Q: How long does the battery last?A: Backup time ranges from 23 to 200 days depending on CPU load and operating temperature. Q: Does the module include monitoring features?A: Yes, it provides a smart Low Battery signal to the CPU before the battery is fully depleted. Q: Is installation possible while CPU is powered off?A: No, the module should be installed after CPU is powered ON to maximize battery life.
$200.00 $100.00
-
General Electric GE Fanuc IC694PWR330 RX3i Power Supply Module High-Capacity
Product Description The IC694PWR330 is a 30‑Watt high-performance power supply module designed for the PACSystems RX3i Serial Expansion Backplane. It delivers reliable, regulated DC power for logic circuits, relay loads, and isolated 24 VDC devices. With wide AC/DC input compatibility, robust protection features, and clear LED status indicators, this module ensures stable operation in diverse industrial environments. Key Features Supports AC input 85–264 VAC or DC input 100–300 VDC for global compatibility Provides three independent outputs: +5 VDC for logic, +24 VDC for relays, and isolated +24 VDC for sensitive modules Equipped with overvoltage, overcurrent, undervoltage, and short-circuit protection Includes 1500 VAC isolation between input and backplane LED indicators for Power, OK, and Run status Designed for single-slot installation; power must be removed before servicing Compatible with RX3i expansion backplanes for distributed rack configurations Technical Specifications Input Characteristics Nominal Input Voltage: 120/240 VAC or 125 VDC Input Voltage Range: 85–264 VAC / 100–300 VDC Maximum Input Power: 100 VA (AC), 50 W (DC) Inrush Current: 4 A peak, 250 ms Output Characteristics Output Voltage Range Maximum Power Notes +5 VDC 5.0–5.2 VDC 30 W Logic and backplane power +24 VDC Relay 24–28 VDC 15 W Relay load modules +24 VDC Isolated 21.5–28 VDC 20 W Input modules and external devices Total Capacity — 30 W combined All outputs share total limit Protection & Performance Isolation: 1500 VAC, input to backplane, 1 minute Overvoltage Protection: 5 VDC shuts down at ~6.4–7 V Overcurrent Protection: 5 VDC limited to 7 A, auto shutdown/restart Ride-through Time: ≥20 ms during power interruptions Fuse: 2 A internal fuse (44A724627‑109) Mechanical & Environmental Mounting: Single-slot in RX3i serial expansion backplane Operating Temperature: 0°C to 60°C Storage Temperature: –40°C to +85°C Humidity: 5–95% non-condensing Wiring: 14–22 AWG, two wires per terminal Certifications: UL, CE, ATEX, CCC, Marine (ABS, DNVGL) Weight: 1.19 lbs Typical Applications Providing reliable auxiliary power to RX3i distributed expansion racks Industrial automation systems with mixed relay and logic loads Systems requiring isolated 24 VDC outputs for noise-sensitive devices Environments demanding global AC/DC compatibility and robust protection FAQ Q: Can IC694PWR330 be hot-swapped?A: No, power must be removed before installation or servicing. Q: What isolation does it provide?A: 1500 VAC isolation between input and backplane for safety and noise immunity. Q: Which outputs are provided?A: +5 VDC for logic, +24 VDC for relays, and isolated +24 VDC for sensitive modules. Q: What input ranges are supported?A: AC 85–264 V or DC 100–300 V, covering global power standards.
$200.00 $100.00
You have seen 624 out of 2074 products