3 in stock
Delivery within 48 hours, pay afterwards
Mid weeks Monday to friday we offer next day delivery if the product is on stock and exceptions on holidays.
Weekends We offer no deliveries in the weekends.
International Depending on where you’re located, we offer next day delivery. Check your status on this link
DescriptionThe Honeywell 51202335-300 is a specialized cable management component designed for use within the Honeywell TDC 3000 and Experion PKS control system architectures. Specifically engineered for the NAIM-03 (Network Adapter Interface Module) Rev C assembly, this cable strap provides essential mechanical support for high-speed data transmission lines. By securing internal cabinet wiring and managing cable tension, it prevents vibration-induced disconnects and helps maintain signal integrity in mission-critical industrial control environments.Features
System Compatibility: Designed specifically for integration with NAIM-03 Rev C modules in Honeywell DCS cabinets.
Mechanical Stability: Mitigates the risk of intermittent communication faults by securing critical wiring paths.
Industrial Durability: Constructed from reinforced, industrial-grade polymer resistant to atmospheric contaminants.
Maintenance Efficiency: Facilitates organized cable routing, allowing for easier access and replacement of adjacent I/O modules without disturbing the primary communication backbone.
ApplicationsThis cable strap is utilized in high-density electronic environments, including oil and gas refineries, chemical processing plants, and power generation facilities where the reliability of the distributed control system (DCS) communication bus is paramount.Technical Specifications
Model
51202335-300
Brand
Honeywell
Hardware Revision
NAIM-03 Rev C
Product Type
Cable Strap
Operating Temperature
0 to 60 deg C
Storage Temperature
-40 to 85 deg C
Humidity
5 to 95 percent non-condensing
Material
Industrial-grade reinforced polymer
Installation Guidelines
Ensure the cabinet power is managed according to facility safety protocols before performing any maintenance inside the NAIM-03 assembly.
Use the cable strap to secure wiring bundles without over-tightening, which could damage insulation or signal conductors.
Route cables to maintain separation from high-EMI sources to ensure optimal signal integrity.
Verify that the strap is properly seated within the designated mounting points on the Honeywell cabinet rail system.
Handle with care to avoid stress fractures on the polymer material during installation in low-temperature environments.
FAQWhat is the primary function of the 51202335-300?The 51202335-300 is a cable strap used to secure and organize internal wiring for the NAIM-03 Network Adapter Interface Module, ensuring mechanical stability and preventing signal interruptions caused by vibration or loose cabling.Is this component compatible with other Honeywell modules?This part is specifically designed for the NAIM-03 Rev C architecture. While it may fit standard Honeywell cabinet rails, it is intended for use with the specified network interface assembly.
3 in stock
Delivery within 48 hours, pay afterwards
Mid weeks Monday to friday we offer next day delivery if the product is on stock and exceptions on holidays.
Weekends We offer no deliveries in the weekends.
International Depending on where you’re located, we offer next day delivery. Check your status on this link
DescriptionThe Honeywell 8U-PDIPA1 is a specialized digital input module designed for pulse accumulation and high-speed event counting in industrial automation environments. This module is engineered to interface with field devices such as flow meters, proximity sensors, and rotary encoders, providing precise pulse signal acquisition for monitoring and control applications. It is a critical component for systems requiring accurate totalization of discrete pulses, commonly utilized in energy, water treatment, and manufacturing process control.Features
Designed for reliable pulse accumulation and event counting.
Compatible with standard industrial pulse-generating field devices.
Operates on a 24 VDC power supply with a wide input voltage tolerance.
High-stability signal acquisition for consistent data capture.
Supports continuous operation in demanding industrial control cabinet environments.
ApplicationsThis module is typically deployed in systems requiring flow rate monitoring, batch counting, or speed measurement. It integrates seamlessly into larger control architectures to provide real-time data on process throughput and equipment performance.Technical Specifications
Model
8U-PDIPA1
Brand
Honeywell
Module Type
Digital Input Pulse Accumulation Module
Input Voltage
24 VDC
Operating Voltage Range
18 to 30 VDC
Current Consumption
105 mA
Input Current per Channel
5 mA
Output Current Capability
Up to 550 mA
Operating Temperature
-20 to 60 deg C
Storage Temperature
-40 to 85 deg C
Humidity
5 to 95 percent non-condensing
Installation Guidelines
Ensure the control cabinet power is disconnected before installing or removing the module.
Mount the module securely in a clean, dry environment to prevent moisture or particulate ingress.
Use shielded cables for pulse input signals to minimize electromagnetic interference (EMI) from high-voltage lines.
Ensure proper grounding of the module chassis to the cabinet backplane to maintain signal integrity.
Verify that the input signal levels are within the specified 24 VDC range before connecting field devices.
Maintain adequate spacing around the module to ensure proper thermal dissipation during operation.
FAQWhat is the primary function of the 8U-PDIPA1?The 8U-PDIPA1 is designed to count and accumulate pulses from field devices like flow meters and sensors, converting these signals into data that can be processed by your control system.Can this module be used in harsh environments?The module is designed for standard industrial control cabinet environments. It features an operating temperature range of -20 to 60 deg C and should be protected from direct exposure to corrosive or excessively humid conditions.What is the required power supply for this module?The module operates on a 24 VDC supply, with an acceptable operating range between 18 and 30 VDC.
1 in stock
Delivery within 48 hours, pay afterwards
Mid weeks Monday to friday we offer next day delivery if the product is on stock and exceptions on holidays.
Weekends We offer no deliveries in the weekends.
International Depending on where you’re located, we offer next day delivery. Check your status on this link
DescriptionThe Honeywell MC-PD1X02 (Part Number 51304485-150) is a high-performance digital input module and field termination assembly engineered for use within the Honeywell Experion PKS and TDC 3000 distributed control systems. This module provides 16 discrete input channels, facilitating the acquisition of critical field signals such as dry contacts, limit switches, and proximity sensors. By integrating signal conditioning and robust electrical isolation, the MC-PD1X02 ensures reliable data acquisition in demanding industrial environments, including power generation, oil and gas, and chemical processing facilities.Features
16 discrete input channels for high-density signal monitoring.
Supports standard 24 VDC digital inputs and dry contact configurations.
Integrated signal conditioning with robust channel-to-channel and system isolation.
Designed for direct field wiring termination, reducing the requirement for auxiliary relay panels.
Optimized for fast response times, supporting real-time control requirements.
Built-in protection against electrical noise, voltage spikes, and common wiring faults.
ApplicationsThe MC-PD1X02 is designed for process automation environments requiring high-availability signal monitoring. Typical applications include:
Monitoring of field-mounted limit switches and proximity sensors.
Interface for discrete status signals in DCS-controlled process loops.
Integration into redundant control architectures for critical safety or process monitoring.
Refinery and power plant automation systems requiring reliable I/O density.
Technical Specifications
Model
MC-PD1X02
Part Number
51304485-150
Channels
16 Digital Inputs
Input Type
Dry contact / 24 VDC discrete
Isolation
Channel-to-channel and system isolation
Power Consumption
5 W
Operating Temperature
0 to 60 deg C
Storage Temperature
-40 to 85 deg C
Installation Guidelines
Power Down: Always ensure the control system power is disconnected before installing or removing the module from the rack or field assembly.
ESD Protection: Use a grounded wrist strap and follow standard electrostatic discharge (ESD) precautions when handling the module to prevent damage to internal circuitry.
Wiring: Ensure all field wiring is properly secured to the termination points. Use shielded cables where necessary to minimize EMI in high-noise environments.
Mounting: Ensure the module is firmly seated in its designated slot to maintain proper backplane communication and grounding.
Environment: Maintain the operating temperature within the specified 0 to 60 deg C range and ensure adequate ventilation within the control cabinet.
FAQWhat is the primary function of the MC-PD1X02?The MC-PD1X02 acts as a 16-channel digital input module and field termination assembly for Honeywell Experion PKS and TDC 3000 systems, converting discrete field signals into logic states for the controller.Does this module require external signal conditioning?No, the MC-PD1X02 features integrated signal conditioning and isolation, allowing for direct connection to field devices such as dry contacts and 24 VDC sensors.
1 in stock
Delivery within 48 hours, pay afterwards
Mid weeks Monday to friday we offer next day delivery if the product is on stock and exceptions on holidays.
Weekends We offer no deliveries in the weekends.
International Depending on where you’re located, we offer next day delivery. Check your status on this link
3 in stock
Delivery within 48 hours, pay afterwards
Mid weeks Monday to friday we offer next day delivery if the product is on stock and exceptions on holidays.
Weekends We offer no deliveries in the weekends.
International Depending on where you’re located, we offer next day delivery. Check your status on this link
DescriptionThe Honeywell 900C53-0244-00 is a high-performance I/O Scanner Module designed for the ControlEdge HC900 process and safety controller platform. This module facilitates high-speed, Ethernet-based communication between the central CPU and remote I/O racks, enabling efficient distributed acquisition of analog and digital signals. By supporting 10Base-T communication and utilizing onboard processing for parallel data handling, it ensures deterministic data exchange essential for real-time industrial control systems. This module is engineered to reduce wiring complexity and enhance system availability in demanding environments such as oil and gas, power generation, and chemical processing facilities.Features
Integrated microcontroller for independent parallel I/O processing.
Ethernet communication interface utilizing the 10Base-T standard.
Supports remote rack topology for flexible distributed control system expansion.
Automatic module detection and configuration upon insertion.
Hot-swap capability allows for removal and replacement under power to minimize maintenance downtime.
Hardware keying prevents incorrect module-to-terminal block matching.
LED diagnostics provide per-channel status and tri-color module health indication.
ApplicationsThe 900C53-0244-00 is utilized in distributed control architectures where remote I/O scanning is required. It is commonly deployed in process automation applications, including boiler control, burner management systems, and general-purpose process control where reliable, high-speed communication between the controller and field devices is critical.Technical Specifications
Model
900C53-0244-00
Brand
Honeywell
Series
ControlEdge HC900
Communication
10Base-T Ethernet
Max Current Consumption
600 mA at 5 VDC
Operating Temperature
0 to 60 deg C
Storage Temperature
-40 to 70 deg C
Operating Humidity
10 to 90 percent non-condensing
Vibration Rating
5 Hz to 250 Hz (1.0 g acceleration)
Mounting
35 mm DIN rail
Enclosure Material
UL94 V0 compliant
Environmental Rating
G3 conformal coating
Installation Guidelines
Ensure the system power is disconnected before installing or removing the module, unless performing a hot-swap in a system specifically configured for it.
Mount the module on a standard 35 mm DIN rail within a clean, dry, and vibration-dampened enclosure.
Maintain proper clearance around the module to ensure adequate airflow and cooling.
Use shielded Ethernet cabling for all 10Base-T connections to minimize EMI interference.
Verify that the hardware keying on the terminal block matches the module to prevent improper seating.
Handle with standard ESD precautions to prevent damage to sensitive internal components.
FAQWhat is the primary function of the 900C53-0244-00?This module acts as an I/O scanner that bridges the communication between the HC900 CPU and remote I/O racks via Ethernet, allowing for distributed signal processing.Does this module support hot-swapping?Yes, the module is designed for hot-swap capability, allowing it to be removed and inserted while the system is powered, provided the system architecture supports it.What type of communication network does it use?It utilizes the 10Base-T Ethernet standard for reliable, deterministic data exchange.
3 in stock
Delivery within 48 hours, pay afterwards
Mid weeks Monday to friday we offer next day delivery if the product is on stock and exceptions on holidays.
Weekends We offer no deliveries in the weekends.
International Depending on where you’re located, we offer next day delivery. Check your status on this link
1 in stock
Delivery within 48 hours, pay afterwards
Mid weeks Monday to friday we offer next day delivery if the product is on stock and exceptions on holidays.
Weekends We offer no deliveries in the weekends.
International Depending on where you’re located, we offer next day delivery. Check your status on this link
DescriptionThe Honeywell 8U-PAIMA1 is a 16-channel low-level analog input module engineered for high-precision signal acquisition within the Honeywell Series 8 control architecture. This module is specifically designed to interface with thermocouples, RTDs, and millivolt signals, making it an essential component for temperature monitoring in demanding industrial sectors such as power generation, oil and gas refining, and chemical processing. The 8U-PAIMA1 features fully isolated input channels and integrated cold junction compensation, ensuring reliable performance and high measurement accuracy even in environments with significant electrical noise.Features
16 fully isolated input channels with channel-to-channel, channel-to-IOL, and channel-to-power isolation.
Supports a wide range of thermocouple types (J, K, E, T, B, S, R) and RTD sensors (Pt100, Ni120, Cu10, Cu50).
Integrated cold junction compensation for accurate thermocouple readings.
Selectable 50 Hz or 60 Hz line frequency integration for superior noise rejection.
Built-in diagnostic capabilities including open thermocouple detection and per-cycle input validation.
Supports under-power insertion for maintenance efficiency.
High common-mode rejection (120 dB) and normal-mode rejection (60 dB).
ApplicationsThe 8U-PAIMA1 is intended for use in Honeywell Series 8 I/O systems. It is typically deployed in process control applications requiring high-density, isolated temperature measurement, including furnace monitoring, reactor temperature control, and general-purpose industrial data acquisition.Technical Specifications
Model
8U-PAIMA1
Channels
16 (Fully Isolated)
Input Types
Thermocouple, RTD, Millivolt
Scan Rate
1 second (fixed)
Input Impedance
1 Megaohm (DC)
CMRR
120 dB minimum
NMRR
60 dB minimum
Power Supply
24 VDC
Current Consumption
120 mA
Operating Temperature
0 to 60 deg C
Storage Temperature
-40 to 85 deg C
Humidity
0 to 95 percent (non-condensing)
Installation Guidelines
Ensure the I/O carrier is powered down before inserting or removing the module to prevent electrical arcing or damage to the backplane.
The module is designed for mounting within the Honeywell Series 8 I/O system rack. Ensure it is firmly seated and locked into the carrier.
Use shielded twisted-pair cabling for all analog inputs to minimize EMI/RFI interference. Ground the shields at the designated terminal points.
Maintain proper ventilation in the control cabinet to ensure the ambient temperature remains within the 0 to 60 deg C operating range.
Handle with standard ESD precautions to protect sensitive internal circuitry.
FAQWhat types of RTDs does the 8U-PAIMA1 support?The module supports Pt100 (DIN 4376 and JIS C 1604), Ni120 ohm, Cu10 ohm, and Cu50 ohm sensors.Does this module require external power?The module operates on a 24 VDC supply provided through the Series 8 I/O carrier backplane.Is this module coated for harsh environments?No, this specific model (8U-PAIMA1) is provided as an uncoated version.
1 in stock
Delivery within 48 hours, pay afterwards
Mid weeks Monday to friday we offer next day delivery if the product is on stock and exceptions on holidays.
Weekends We offer no deliveries in the weekends.
International Depending on where you’re located, we offer next day delivery. Check your status on this link
11 in stock
Delivery within 48 hours, pay afterwards
Mid weeks Monday to friday we offer next day delivery if the product is on stock and exceptions on holidays.
Weekends We offer no deliveries in the weekends.
International Depending on where you’re located, we offer next day delivery. Check your status on this link
Honeywell 900TEK-0200 Terminal Block Housing
The Honeywell 900TEK-0200, also cataloged as the 900TEK-0200 Terminal Block Housing, operates as a dedicated terminal connection component for low voltage signal wiring within Honeywell ControlEdge HC900 I/O systems.
Hardware Specifications
Parameter
Specification
Model
900TEK-0200
Brand
Honeywell
Product Type
Terminal Block Housing
Origin
USA
Weight
0.1 kg
Dimensions
13.4 x 3.5 x 5.4 cm
Operating Temp
Not specified by manufacturer
Power Consumption
Passive terminal component, no external power consumption
Terminal Type
Low Voltage Terminal Block
Terminal Quantity
20 channels
Terminal Style
Euro style
Wire Gauge Range
Barrier and Euro: #14 to 26 AWG, solid or stranded
Contact Style
Post and socket
Terminal Color
Black
High Voltage Terminal Color
Red
High Voltage Contacts
Tin coated
Low Voltage Contacts
Gold plated
Door Access
Tool accessible
Tariff Code
8537101190
Place of Shipment
Xiamen, China
Channel Isolation and Process Wiring Interface
The Honeywell 900TEK-0200 provides a physical termination interface for low voltage field wiring connections. The terminal block uses post and socket contact construction to maintain mechanical alignment between wiring terminals and connected I/O assemblies.
For Honeywell process control installations, terminal assemblies support structured field signal routing. Therefore, correct separation between low voltage signal conductors and high voltage wiring paths must be maintained during installation. The gold plated low voltage contacts reduce contact oxidation effects, while tin coated high voltage contacts support standard electrical termination practices.
Frequently Asked Questions
Q: What type of wiring does the Honeywell 900TEK-0200 support?A: The terminal block supports solid or stranded conductors from #14 to 26 AWG for barrier and Euro style wiring connections.
Q: Does the Honeywell 900TEK-0200 require external power?A: No. The 900TEK-0200 functions as a passive terminal connection component and does not consume operating power.
Q: What access method is used for the terminal connections?A: The terminal block uses tool accessible connections to prevent unintended field adjustments during operation.
Field Installation Guidelines
Install the Honeywell 900TEK-0200 according to the HC900 system hardware installation documentation.
Verify that field wiring matches the required terminal assignment before applying system power.
Separate low voltage signal wiring from high voltage conductors to reduce electrical interference.
Use compatible wire gauges within the specified #14 to 26 AWG range.
Confirm terminal contact surfaces remain clean before completing the post and socket connection.
Apply proper cable routing and strain relief methods to prevent mechanical stress on terminal connections.
Inspect wiring polarity and termination points during commissioning procedures.
11 in stock
Delivery within 48 hours, pay afterwards
Mid weeks Monday to friday we offer next day delivery if the product is on stock and exceptions on holidays.
Weekends We offer no deliveries in the weekends.
International Depending on where you’re located, we offer next day delivery. Check your status on this link
11 in stock
Delivery within 48 hours, pay afterwards
Mid weeks Monday to friday we offer next day delivery if the product is on stock and exceptions on holidays.
Weekends We offer no deliveries in the weekends.
International Depending on where you’re located, we offer next day delivery. Check your status on this link
Honeywell 900P01-0301 ControlEdge HC900 AC Power Supply Module
Configured for AC to DC power conversion in the Honeywell ControlEdge HC900 system, the Honeywell 900P01-0301 (900P01-0301 AC Power Supply Module) provides direct electrical power delivery for controller racks and connected I/O modules.
Hardware Specifications
Parameter
Specification
Model
900P01-0301
Brand
Honeywell Process Solutions
Origin
USA
Product Series
ControlEdge HC900 PS-AC 900
Module Type
AC Power Supply Module
Input Voltage
120 / 240 VAC
Input Frequency
47 - 63 Hz
Power Output
58 W / 60 W nominal capacity
Connection Type
Screw Terminals
Mounting Type
HC900 modular rack mounting
Weight
Approx. 820 g
Dimensions
137.0 mm H x 72.6 mm W x 148.0 mm D
Process Control Power Conversion and Isolation Features
The Honeywell 900P01-0301 supports ControlEdge HC900 rack power distribution by converting 120 / 240 VAC input into regulated DC power for system modules. Therefore, the module maintains the electrical supply path between the AC source and the controller backplane.
For Honeywell process control platforms, power modules operate with industrial control architectures that commonly require channel-to-channel isolation practices, controlled grounding, and separation between field wiring and controller power circuits. The 900P01-0301 uses screw terminal connections to provide direct field wiring termination for AC input power.
The module supports the HC900 modular rack structure and supplies power to connected controller components according to rack loading requirements. Additionally, installation practices must maintain proper wiring segregation to reduce electrical interference on process control circuits.
Frequently Asked Questions
Q: What input voltage range does the Honeywell 900P01-0301 support?A: The module accepts 120 / 240 VAC input with an operating frequency range of 47 - 63 Hz.
Q: What connection method does the 900P01-0301 use for field power wiring?A: The module uses screw terminal connections for AC power input termination.
Q: Can the 900P01-0301 operate outside the ControlEdge HC900 rack system?A: The module is designed for installation within Honeywell ControlEdge HC900 controller and I/O rack assemblies. Standalone operation is not specified.
Field Installation Guidelines
Install the module only in compatible Honeywell ControlEdge HC900 rack assemblies.
Verify AC input voltage before connecting field power conductors.
Maintain separation between AC power wiring and low-level signal wiring to reduce electromagnetic interference.
Connect protective grounding according to the cabinet grounding design and local electrical standards.
Confirm rack power loading requirements before installing additional controller or I/O modules.
Inspect screw terminal connections for proper mechanical tightening during commissioning.
Use shielded signal wiring and correct grounding methods for adjacent analog or communication circuits.
11 in stock
Delivery within 48 hours, pay afterwards
Mid weeks Monday to friday we offer next day delivery if the product is on stock and exceptions on holidays.
Weekends We offer no deliveries in the weekends.
International Depending on where you’re located, we offer next day delivery. Check your status on this link
11 in stock
Delivery within 48 hours, pay afterwards
Mid weeks Monday to friday we offer next day delivery if the product is on stock and exceptions on holidays.
Weekends We offer no deliveries in the weekends.
International Depending on where you’re located, we offer next day delivery. Check your status on this link
Honeywell 900H01-0202 Digital Output Module
Configured for relay-based digital signal switching in the Honeywell ControlEdge HC900 controller system, the Honeywell 900H01-0202 (900H01 Digital Output Module) provides direct physical and electrical execution through eight relay output channels.
Hardware Specifications
Parameter
Specification
Model
900H01-0202
Brand
Honeywell
Product Type
Digital Output Module
Origin
USA
Weight
0.2 kg
Dimensions
13.4 x 3.5 x 5.4 cm
Operating Temp
0 deg C to 60 deg C
Power Consumption
5 VDC: 110 mA max; 24 VDC: 100 mA max
Output Channels
8 relay output channels
Output Device
Electromechanical relay
Relay Configuration
4 Form A relays, 4 Form C relays
Output Voltage Rating
120/240 VAC, 30 VDC
Maximum Relay Current
4 A max per relay
Maximum Leakage Current
1 mA at 350 VDC
OFF to ON Response Time
11 ms max
ON to OFF Response Time
8 ms max
Maximum Power Loading
5 VDC: 40 mA max; 24 VDC: 200 mA max
Tariff Code
8537101190
Process Control Relay Output Characteristics
The Honeywell 900H01-0202 operates as a relay-based output interface within the ControlEdge HC900 platform. It converts controller output commands into electrical switching actions through eight electromechanical relay channels.
The module provides mixed relay configurations with four Form A outputs and four Form C outputs. Therefore, the module supports both normally open switching and changeover contact applications. The relay contacts handle up to 120/240 VAC or 30 VDC loads with a maximum current rating of 4 A per channel.
Additionally, the module design follows Honeywell process control I/O requirements, where channel isolation and controlled switching behavior support discrete field device operation.
Channel Relay Interface and DCS Integration
The 900H01-0202 uses relay output switching rather than semiconductor output devices. As a result, it provides physical contact separation between the controller logic circuit and external field loads.
For Honeywell ControlEdge HC900 applications, the digital output module operates as part of the distributed I/O architecture. The relay channels execute commands from the controller logic while maintaining defined response characteristics for industrial switching tasks.
The module does not provide 4-20 mA HART signal processing because it is designed specifically for discrete relay output functions. However, Honeywell process control systems typically combine digital relay modules with analog and communication modules to manage complete control loops.
Frequently Asked Questions
Q: How many relay outputs are available on the Honeywell 900H01-0202?A: The module provides eight relay output channels, including four Form A relays and four Form C relays.
Q: What voltage levels can the relay outputs switch?A: The relay contacts support 120/240 VAC and 30 VDC switching applications with a maximum current of 4 A per relay.
Q: What is the module power consumption from the controller backplane?A: The module requires up to 110 mA at 5 VDC and up to 100 mA at 24 VDC from the system power supply.
Field Installation Guidelines
Install the module only within the designated Honeywell ControlEdge HC900 rack and verify backplane compatibility before insertion.
Confirm field wiring polarity, relay contact type, and load voltage ratings before connecting external devices.
Separate relay output wiring from low-level analog signal wiring to reduce electrical interference.
Use appropriate grounding practices for the control cabinet and maintain proper shielding for field cables where required.
Verify relay contact condition and terminal connections during commissioning.
Follow controller power isolation procedures before removing or installing the module.
11 in stock
Delivery within 48 hours, pay afterwards
Mid weeks Monday to friday we offer next day delivery if the product is on stock and exceptions on holidays.
Weekends We offer no deliveries in the weekends.
International Depending on where you’re located, we offer next day delivery. Check your status on this link
11 in stock
Delivery within 48 hours, pay afterwards
Mid weeks Monday to friday we offer next day delivery if the product is on stock and exceptions on holidays.
Weekends We offer no deliveries in the weekends.
International Depending on where you’re located, we offer next day delivery. Check your status on this link
Honeywell 900RR0-0001 Redundant CPU Rack Assembly
Configured for redundant CPU module synchronization in the Honeywell ControlEdge HC900 system, the Honeywell 900RR0-0001 (900RR0-0001 Redundant CPU Rack Assembly) provides the physical rack structure and backplane interface for dual controller operation.
Hardware Specifications
Parameter
Specification
Model
900RR0-0001
Brand
Honeywell
Origin
Not specified
Product Type
Redundant CPU Rack Assembly
System Compatibility
Honeywell ControlEdge HC900 Hybrid Controller System
CPU Slot Capacity
Dual CPU module slots for redundant controller configuration
Backplane Interface
HC900 communication and CPU synchronization backplane
Power Distribution
Distributes regulated DC power from HC900 power supply modules
Mounting Type
Industrial cabinet rack mounting frame
Operating Temp
0 deg C to +60 deg C
Storage Temp
-40 deg C to +70 deg C
Relative Humidity
10% to 90% non-condensing
Power Consumption
Determined by installed CPU modules and connected HC900 hardware
ControlEdge HC900 Redundant Backplane Synchronization
The 900RR0-0001 rack assembly provides the mechanical and electrical interface required for redundant CPU operation within the ControlEdge HC900 platform. It supports dual CPU installation and maintains communication paths between active and standby controller modules.
In addition, the rack distributes internal power connections and maintains synchronization channels required for redundant controller coordination. The assembly does not execute control logic directly; instead, it provides the physical infrastructure for CPU modules, communication links, and system expansion components.
For Honeywell process controller installations, the rack architecture supports HC900 system communication methods and controller redundancy functions. The design allows installed CPU modules to exchange operational status information and perform controlled transfer procedures during controller state changes.
Frequently Asked Questions
Q: Does the Honeywell 900RR0-0001 execute application control programs directly?A: No. The 900RR0-0001 is a rack and backplane assembly. Installed CPU modules execute application logic, while the rack provides mechanical mounting, power distribution, and communication connections.
Q: Can the 900RR0-0001 operate with a single CPU module?A: The rack supports dual CPU module installation for redundant configurations. Actual operating mode depends on the installed HC900 controller hardware and system configuration.
Q: Does the 900RR0-0001 require separate firmware installation?A: No. The rack assembly does not contain a standalone firmware application. Firmware compatibility applies to the installed CPU and controller modules.
Field Installation Guidelines
Install the 900RR0-0001 inside a suitable industrial control cabinet with sufficient mechanical support.
Verify rack positioning before inserting CPU modules to prevent connector damage.
Confirm that all backplane connectors are clean and properly aligned before module installation.
Maintain separation between power wiring and communication wiring to reduce electrical interference.
Connect cabinet grounding according to industrial control panel grounding practices.
Check installed CPU modules, power supply modules, and communication interfaces before system startup.
Follow Honeywell ControlEdge HC900 hardware manuals for final rack configuration and commissioning procedures.
11 in stock
Delivery within 48 hours, pay afterwards
Mid weeks Monday to friday we offer next day delivery if the product is on stock and exceptions on holidays.
Weekends We offer no deliveries in the weekends.
International Depending on where you’re located, we offer next day delivery. Check your status on this link
11 in stock
Delivery within 48 hours, pay afterwards
Mid weeks Monday to friday we offer next day delivery if the product is on stock and exceptions on holidays.
Weekends We offer no deliveries in the weekends.
International Depending on where you’re located, we offer next day delivery. Check your status on this link
Honeywell ControlEdge HC900 Controller Component
Configured for process execution and controller logic management in the Honeywell ControlEdge HC900 system, the Honeywell ControlEdge HC900 Controller Component (HC900 Controller Module) provides direct physical and electrical execution for control processing, I/O coordination, and data handling.
Hardware Specifications
Parameter
Specification
Model
Honeywell ControlEdge HC900 Controller Component
Brand
Honeywell
Processor Architecture
32-bit RISC-based PowerPC e300 architecture
Memory Configuration
Flash memory for configuration storage; battery-backed RAM / DDR2 memory for runtime data retention
Control Function
PID loop control, Boolean logic execution, mathematical functions, analog processing, sequencing, ramp/soak programming
Scan Operation
Dual scan method for digital and analog processing tasks
Communication Interface
Ethernet interface with Modbus/TCP support and peer-to-peer controller communication
Mounting Structure
Modular rack-based controller architecture with 4, 8, and 12 slot configurations
I/O Handling
Supports hot-swappable I/O modules with automatic configuration recognition
Environmental Protection
Conformal coating options available for industrial environments requiring corrosion and gas protection
Process Control and DCS Interface Features
The Honeywell ControlEdge HC900 controller architecture manages analog and digital process signals through modular I/O expansion and controller-based execution. Therefore, the processor handles PID algorithms, logic operations, and scheduled control sequences directly within the controller environment.
The controller supports industrial communication functions through Ethernet and Modbus/TCP protocols. In addition, the architecture allows multiple host, HMI, and SCADA connections for supervisory data exchange.
For process instrumentation integration, HC900 systems support I/O modules designed for standard industrial signal handling, including 4-20 mA HART loop protocol applications, FOUNDATION Fieldbus and Profibus PA connectivity options where compatible interface modules are installed. Channel-to-channel isolation depends on the selected I/O module configuration.
The controller executes deterministic control tasks through its backplane communication structure. Furthermore, the modular design allows users to expand I/O density while maintaining controller configuration consistency.
Frequently Asked Questions
Q: Does the Honeywell ControlEdge HC900 Controller Component support hot-swapping of I/O modules?A: Yes. The HC900 modular architecture supports hot-swappable I/O modules with automatic configuration recognition. Installation procedures must follow the system hardware manual and power isolation requirements.
Q: What communication protocols are supported by the HC900 controller platform?A: The controller supports Ethernet communication using Modbus/TCP protocol and provides peer-to-peer communication between compatible HC900 controllers.
Q: How does the HC900 controller retain configuration data during power interruption?A: The controller uses Flash memory for permanent configuration storage and battery-backed RAM / DDR2 memory for runtime data retention and recovery functions.
Field Installation Guidelines
Install the controller module on the designated HC900 rack assembly and verify mechanical engagement with the backplane connector.
Confirm that rack grounding follows industrial control panel grounding practices before applying power.
Separate analog signal wiring from high-voltage power cables to reduce electromagnetic interference.
Use shielded instrumentation cables for low-level analog signals and terminate shields according to site grounding standards.
Verify Ethernet cable routing and connector installation before establishing Modbus/TCP communication.
Check firmware compatibility between the controller module and installed I/O modules before system commissioning.
Maintain adequate cabinet ventilation according to the installed enclosure design and environmental requirements.
11 in stock
Delivery within 48 hours, pay afterwards
Mid weeks Monday to friday we offer next day delivery if the product is on stock and exceptions on holidays.
Weekends We offer no deliveries in the weekends.
International Depending on where you’re located, we offer next day delivery. Check your status on this link
11 in stock
Delivery within 48 hours, pay afterwards
Mid weeks Monday to friday we offer next day delivery if the product is on stock and exceptions on holidays.
Weekends We offer no deliveries in the weekends.
International Depending on where you’re located, we offer next day delivery. Check your status on this link
Honeywell 900S75S-0460 I/O Scanner Module
Configured for I/O data scanning and rack communication in the Honeywell ControlEdge 900 system, the Honeywell 900S75S-0460 (900S75S I/O Scanner Module) provides direct physical and electrical execution for controller-to-I/O rack signal exchange.
Hardware Specifications
Parameter
Specification
Model
900S75S-0460
Brand
Honeywell
Product Type
I/O Scanner Module
System Platform
Honeywell ControlEdge 900
Scanner Configuration
2 port I/O scanner
Rack Allocation
1 module per I/O rack
Origin
USA
Place of Shipment
Xiamen, China
Weight
0.4 kg
Dimensions
13.7 x 3.6 x 5.4 cm
Power Supply
24 VDC (18-36 VDC)
Power Consumption
15 W typical, 25 W maximum
Maximum I/O Points
Up to 512 points per controller
Operating Temp
-40 deg C to +70 deg C
Relative Humidity
5-95% non-condensing
Tariff Code
8537101190
ControlEdge 900 I/O Communication Characteristics
The 900S75S-0460 performs I/O scanning functions within the ControlEdge 900 controller architecture. It manages communication between the controller and connected I/O racks through dedicated scanner ports. In addition, the module supports high-density I/O configurations with up to 512 I/O points per controller.
The scanner module uses defined rack-level communication paths to exchange process data between field I/O modules and the control processor. Therefore, correct rack addressing, backplane connection, and module configuration are required during system integration.
Frequently Asked Questions
Q: What is the primary function of the Honeywell 900S75S-0460?A: The 900S75S-0460 operates as an I/O Scanner Module for the ControlEdge 900 platform. It scans connected I/O racks and transfers process data between I/O modules and the controller.
Q: How many I/O points can the 900S75S-0460 system support?A: The ControlEdge 900 configuration supports up to 512 I/O points per controller when configured with compatible I/O modules and rack structures.
Q: What power supply does the 900S75S-0460 require?A: The module operates from a 24 VDC supply with an input range of 18-36 VDC. The typical power consumption is 15 W, with a maximum value of 25 W.
Field Installation Guidelines
Install the 900S75S-0460 on the designated ControlEdge 900 I/O rack position according to the system hardware configuration.
Verify the following installation conditions:
Confirm that the 24 VDC power source meets the specified input range before energizing the module.
Inspect the backplane connector and rack interface for proper mechanical alignment.
Maintain separation between I/O communication wiring and high-voltage power cables to reduce electrical interference.
Connect cable shields according to the site grounding standard for industrial control systems.
Check module status indicators after startup and confirm normal scanner communication through the controller configuration software.
Remove power before replacing or installing the module to prevent backplane damage.
11 in stock
Delivery within 48 hours, pay afterwards
Mid weeks Monday to friday we offer next day delivery if the product is on stock and exceptions on holidays.
Weekends We offer no deliveries in the weekends.
International Depending on where you’re located, we offer next day delivery. Check your status on this link
11 in stock
Delivery within 48 hours, pay afterwards
Mid weeks Monday to friday we offer next day delivery if the product is on stock and exceptions on holidays.
Weekends We offer no deliveries in the weekends.
International Depending on where you’re located, we offer next day delivery. Check your status on this link
Honeywell 900S50S-0460 I/O Scanner Module
Configured for I/O data scanning and rack communication in the Honeywell ControlEdge 900 system, the Honeywell 900S50S-0460 (900S50S I/O Scanner Module) provides direct physical and electrical execution between the controller and distributed I/O racks.
Hardware Specifications
Parameter
Specification
Model
900S50S-0460
Brand
Honeywell
Product Type
I/O Scanner Module
System Platform
ControlEdge 900
Scanner Configuration
2 Port I/O Scanner, 1 per I/O Rack
Origin
USA
Weight
0.4 kg
Dimensions
13.7 x 3.6 x 5.4 cm
Operating Temp
-40 deg C to +70 deg C
Storage Temp
-40 deg C to +85 deg C
Power Supply
24 VDC (18-36 V)
Power Consumption
8 W typical, 12 W maximum
Isolation
1500 V AC
Relative Humidity
5-95% non-condensing
Tariff Code
8537101190
Shipment Location
Xiamen, China
Process Control Communication and Isolation Features
The Honeywell 900S50S-0460 performs I/O rack scanning functions within the ControlEdge 900 architecture. The module manages communication between the controller and connected I/O assemblies through dedicated scanner ports.
Additionally, the module uses electrical isolation rated at 1500 V AC to separate field-side signals from internal system circuits. Therefore, it reduces the influence of external electrical disturbances during signal exchange.
The ControlEdge 900 I/O architecture supports modular I/O density scaling by allowing one scanner module per I/O rack. Furthermore, the scanner design maintains organized data transfer between controller processing tasks and distributed I/O channels.
Frequently Asked Questions
Q: What is the primary function of the Honeywell 900S50S-0460 module?A: The module operates as an I/O Scanner Module for the ControlEdge 900 platform and manages communication between the controller and an I/O rack.
Q: What power supply range does the 900S50S-0460 require?A: The module requires a 24 VDC power source with an operating range of 18-36 VDC.
Q: Can the 900S50S-0460 operate in high temperature environments?A: Yes. The module supports an operational temperature range from -40 deg C to +70 deg C according to the provided specifications.
Field Installation Guidelines
Install the 900S50S-0460 inside the designated ControlEdge 900 I/O rack position according to the system hardware configuration requirements.
Verify that the 24 VDC supply wiring maintains correct polarity before energizing the module. Use appropriate industrial wiring practices to separate power conductors from low-level communication and signal cables.
Connect grounding and shielding according to the cabinet design standard. Ensure that cable routing minimizes exposure to electromagnetic interference sources, including high-current switching devices and motor drive equipment.
Before commissioning, inspect module seating, rack connections, and communication interfaces. Confirm that the scanner status indicators show normal operating conditions after system power-up.
11 in stock
Delivery within 48 hours, pay afterwards
Mid weeks Monday to friday we offer next day delivery if the product is on stock and exceptions on holidays.
Weekends We offer no deliveries in the weekends.
International Depending on where you’re located, we offer next day delivery. Check your status on this link
11 in stock
Delivery within 48 hours, pay afterwards
Mid weeks Monday to friday we offer next day delivery if the product is on stock and exceptions on holidays.
Weekends We offer no deliveries in the weekends.
International Depending on where you’re located, we offer next day delivery. Check your status on this link
Honeywell 900S50-0460 ControlEdge HC900 I/O Scanner Module
Configured for I/O data scanning and expansion communication in the Honeywell ControlEdge HC900 system, the Honeywell 900S50-0460 (900S50 I/O Scanner Module) provides direct physical and electrical execution for distributed I/O communication tasks.
Hardware Specifications
Parameter
Specification
Model
900S50-0460
Brand
Honeywell
Product Type
I/O Scanner Module
System Platform
ControlEdge HC900
Origin
USA
Place of Shipment
Xiamen, China
Weight
0.4 kg
Dimensions
13.7 x 3.8 x 5.4 cm
Operating Temp
-40 deg C to +70 deg C
Power Consumption
5 VDC, 770 mA max
Input Voltage
24 VDC nominal
Isolation
500 V between field circuits
Scanner Status Indication
Red/Green LED indicates module mode or error status
Expansion I/O Port Indication
Green/Yellow LEDs indicate receive/transmit activity
Tariff Code
8537101190
ControlEdge HC900 I/O Communication Characteristics
The 900S50-0460 operates as an I/O scanning interface within the ControlEdge HC900 controller architecture. It manages communication between the controller processing layer and connected expansion I/O resources.
The module receives 24 VDC nominal input power and provides a 5 VDC backplane loading requirement with a maximum current draw of 770 mA. In addition, the module uses LED status indicators for diagnostic identification, including operational mode, module error conditions, and expansion port communication activity.
The Honeywell ControlEdge HC900 platform supports industrial process control communication functions, and the 900S50-0460 maintains field-side electrical isolation with a specified 500 V isolation rating between field circuits.
Frequently Asked Questions
Q: What function does the Honeywell 900S50-0460 perform in the ControlEdge HC900 system?A: The 900S50-0460 performs I/O scanning functions and manages communication between the ControlEdge HC900 controller and connected I/O expansion resources.
Q: What power requirements does the 900S50-0460 have?A: The module accepts 24 VDC nominal input voltage and requires 5 VDC supply loading with a maximum consumption of 770 mA.
Q: How does the module indicate operating conditions?A: The module uses Red/Green LEDs for mode and error indication, while Green/Yellow LEDs indicate expansion I/O receive and transmit activity.
Field Installation Guidelines
Install the 900S50-0460 in the designated ControlEdge HC900 rack position according to the system hardware configuration manual.
Verify the 24 VDC power wiring polarity before applying field power.
Keep field signal wiring separated from high-voltage power cables to reduce electrical interference.
Connect shielded field cables according to the site grounding standard and avoid multiple grounding points that may create ground loops.
Check LED status indicators after installation to confirm normal module operation and communication activity.
Verify backplane seating and connector engagement before system startup.
Perform controller diagnostics to confirm I/O scanner communication after replacement or installation.
11 in stock
Delivery within 48 hours, pay afterwards
Mid weeks Monday to friday we offer next day delivery if the product is on stock and exceptions on holidays.
Weekends We offer no deliveries in the weekends.
International Depending on where you’re located, we offer next day delivery. Check your status on this link
11 in stock
Delivery within 48 hours, pay afterwards
Mid weeks Monday to friday we offer next day delivery if the product is on stock and exceptions on holidays.
Weekends We offer no deliveries in the weekends.
International Depending on where you’re located, we offer next day delivery. Check your status on this link
Honeywell 900RSM-0200 Redundant Switch Module
Configured for redundant controller switching operation in the Honeywell ControlEdge HC900 system, the Honeywell 900RSM-0200 (900RSM-0200 Redundant Switch Module) provides direct physical and electrical execution for controller rack redundancy selection and status indication.
Hardware Specifications
Parameter
Specification
Model
900RSM-0200
Brand
Honeywell
Product Type
Redundant Switch Module
System Platform
ControlEdge HC900
Origin
USA
Weight
0.4 kg
Dimensions
13.7 x 3.6 x 5.4 cm
Operating Temp
0 deg C to +60 deg C
Storage Temp
-40 deg C to +85 deg C
Power Consumption
5 V; 22 mA max
Lead/Reserve Indication
Green arrow LEDs
Mode Switch
Removable key, 2 keys supplied
Switch Positions
Three stationary positions and one momentary position
Tariff Code
8537101190
Shipment Location
Xiamen, China
Honeywell ControlEdge HC900 Redundant Switching Function
The 900RSM-0200 module manages redundant controller rack selection within the ControlEdge HC900 architecture. It uses a keyed mechanical switch assembly to define controller operating states and provides visual status indication through green arrow LEDs.
In addition, the module operates from a 5 V supply rail and maintains a maximum loading requirement of 22 mA. The switch mechanism provides three fixed positions and one momentary position for manual redundancy control operations.
The module supports Honeywell process control hardware configurations where redundant controller racks require local physical selection and status monitoring.
Frequently Asked Questions
Q: What is the primary function of the Honeywell 900RSM-0200?A: The 900RSM-0200 functions as a redundant switch module for ControlEdge HC900 redundant controller rack configurations. It provides manual controller selection and LED status indication.
Q: What type of power supply does the 900RSM-0200 require?A: The module operates from a 5 V power supply and has a maximum current loading of 22 mA.
Q: Does the module include a key switch mechanism?A: Yes. The module includes a removable key switch with two supplied keys, three stationary positions, and one momentary position.
Field Installation Guidelines
Install the 900RSM-0200 module according to the ControlEdge HC900 rack installation requirements.
Verify the module position and rack configuration before installation.
Confirm the 5 V power connection before applying system power.
Keep control wiring separated from high-voltage power cables to reduce electrical interference.
Check the green arrow LED indicators after installation to confirm the selected redundant controller status.
Maintain proper grounding practices for the controller rack and connected equipment.
Use the supplied keys only for authorized redundancy switching operations.
11 in stock
Delivery within 48 hours, pay afterwards
Mid weeks Monday to friday we offer next day delivery if the product is on stock and exceptions on holidays.
Weekends We offer no deliveries in the weekends.
International Depending on where you’re located, we offer next day delivery. Check your status on this link
11 in stock
Delivery within 48 hours, pay afterwards
Mid weeks Monday to friday we offer next day delivery if the product is on stock and exceptions on holidays.
Weekends We offer no deliveries in the weekends.
International Depending on where you’re located, we offer next day delivery. Check your status on this link
Honeywell 900P02-0001 HC900 Power Supply Module
Configured for regulated DC power conversion in the Honeywell HC900 Process Automation Controller system, the Honeywell 900P02-0001 (900P02-0001 Controller Power Supply Module) provides direct electrical power execution for controller CPUs, rack backplane circuits, and connected I/O modules.
Hardware Specifications
Parameter
Specification
Model
900P02-0001
Brand
Honeywell
Product Type
HC900 Controller Power Supply Module
Origin
USA
Weight
Approx. 0.6 kg
Operating Temp
0 deg C to 60 deg C
Storage Temp
-40 deg C to 85 deg C
Power Consumption
28 W output power
Input Voltage
100 to 240 VAC universal input
Input Frequency
47 to 63 Hz
Output Voltage
Regulated DC power output
Current Rating
0.9 A to 2.0 A
Protection Functions
Overload protection, short-circuit protection, thermal shutdown
Mounting Method
Dedicated HC900 rack power supply slot installation
Relative Humidity
10% to 90% RH, non-condensing
Process Control Power Interface Characteristics
The Honeywell 900P02-0001 provides regulated DC power conversion for the HC900 controller rack. It supplies operating power for CPU modules, communication circuits, and installed I/O modules through the rack backplane.
In addition, the module supports stable operation of process control signal systems by maintaining controlled DC output conditions. Honeywell HC900 systems commonly integrate analog and field communication modules that use 4-20 mA HART loop protocol, FOUNDATION Fieldbus, or Profibus PA interfaces. The power module maintains the rack electrical environment required for these signal processing assemblies.
The module supports controller installations that require channel-to-channel isolation within connected I/O architectures. Therefore, proper grounding, wiring separation, and cabinet power distribution practices must be maintained during installation.
Frequently Asked Questions
Q: Can the 900P02-0001 operate with Honeywell HC900 redundant power configurations?A: The 900P02-0001 is designed for HC900 rack power applications. Redundant operation depends on the installed rack configuration and compatible hardware arrangement.
Q: Does the 900P02-0001 provide direct field instrument power?A: The module provides controller rack DC power. Field device power requirements depend on the installed I/O modules and external instrument power supplies.
Q: What installation factors affect power module performance?A: Correct rack mounting, proper grounding, adequate ventilation, and separation from high-noise electrical circuits support stable operation.
Field Installation Guidelines
Install the 900P02-0001 in the designated power supply position of the Honeywell HC900 rack assembly.
Verify that the AC input wiring matches the specified 100 to 240 VAC supply range before energizing the module.
Connect protective earth grounding according to industrial cabinet grounding practices.
Route power wiring separately from analog signal cables and communication wiring to reduce electrical interference.
Confirm rack backplane connections are fully seated before applying power.
Inspect terminals, connectors, and enclosure conditions during commissioning and scheduled maintenance.
11 in stock
Delivery within 48 hours, pay afterwards
Mid weeks Monday to friday we offer next day delivery if the product is on stock and exceptions on holidays.
Weekends We offer no deliveries in the weekends.
International Depending on where you’re located, we offer next day delivery. Check your status on this link
11 in stock
Delivery within 48 hours, pay afterwards
Mid weeks Monday to friday we offer next day delivery if the product is on stock and exceptions on holidays.
Weekends We offer no deliveries in the weekends.
International Depending on where you’re located, we offer next day delivery. Check your status on this link
Honeywell 900C75S-0460 ControlEdge HC900 Safety Redundant CPU Module
The Honeywell 900C75S-0460, also cataloged as the 900C75S Safety Redundant CPU Module, operates as a dedicated hardware component for redundant logic execution and controller coordination within the Honeywell ControlEdge HC900 system.
Hardware Specifications
Parameter
Specification
Model
900C75S-0460
Brand
Honeywell
Product Series
ControlEdge HC900
Module Type
Safety Redundant CPU Module
Origin
USA
Processor Architecture
e300 32-bit RISC-based PowerPC processor
Integrated Memory
128 MB RAM
Function Block Capacity
Supports up to 15,000 function blocks
Supply Voltage
5 VDC from controller rack power system
Communication Interfaces
Modbus TCP, Modbus RTU, Ethernet/IP, PROFIBUS, RS-485, Peer-to-Peer Ethernet
I/O Capacity
Up to 2,304 Analog Inputs, 480/576 Analog Outputs, and 4,608 Digital Inputs/Outputs
Redundancy Configuration
Split Rack Redundancy with Lead/Reserve CPU architecture
Safety Certification
SIL safety capability for Safety Instrumented Systems
Weight
0.4 kg
Dimensions
137 mm H x 38.1 mm W
Operating Temp
Industrial ambient operating range (exact value not specified)
Power Consumption
Rack supplied 5 VDC power input
Process Control Communication and Safety Integration
The 900C75S-0460 CPU module executes control algorithms, manages I/O data processing, and coordinates redundant processor operation inside the ControlEdge HC900 platform. In addition, the module supports industrial communication protocols including Modbus TCP, Modbus RTU, Ethernet/IP, and PROFIBUS for controller-to-device data exchange.
The module supports safety-oriented controller configurations with SIL capability. Therefore, the Lead and Reserve CPU arrangement maintains synchronized control states and allows the system to manage processor faults without interrupting configured control execution.
For process instrumentation integration, Honeywell controller architectures support signal interfaces based on industrial standards such as 4-20 mA HART loop communication, FOUNDATION Fieldbus, and PROFIBUS PA through compatible I/O modules. Furthermore, channel-to-channel isolation designs in supported I/O assemblies reduce electrical interference between field signals.
Frequently Asked Questions
Q: Does the 900C75S-0460 support redundant CPU operation?A: Yes. The module supports Split Rack Redundancy configurations using Lead and Reserve CPU operation with compatible redundant controller hardware.
Q: What power source does the 900C75S-0460 require?A: The CPU module receives 5 VDC power from the controller rack power distribution system.
Q: Can the module communicate directly with field instruments?A: The CPU provides controller communication functions. Field instrument interfaces require compatible ControlEdge HC900 I/O modules supporting protocols such as 4-20 mA HART, FOUNDATION Fieldbus, or PROFIBUS PA.
Field Installation Guidelines
Install the CPU module only in a compatible Honeywell ControlEdge HC900 controller rack.
Verify rack power availability before inserting or removing the module.
Confirm the redundant CPU configuration uses the specified rack arrangement and compatible redundancy components.
Maintain proper cabinet grounding and connect shielded communication cables according to industrial installation practices.
Separate communication wiring from high-voltage power cables to reduce electromagnetic interference.
Verify firmware compatibility between CPU modules, controller configuration tools, and connected I/O assemblies before commissioning.
11 in stock
Delivery within 48 hours, pay afterwards
Mid weeks Monday to friday we offer next day delivery if the product is on stock and exceptions on holidays.
Weekends We offer no deliveries in the weekends.
International Depending on where you’re located, we offer next day delivery. Check your status on this link
11 in stock
Delivery within 48 hours, pay afterwards
Mid weeks Monday to friday we offer next day delivery if the product is on stock and exceptions on holidays.
Weekends We offer no deliveries in the weekends.
International Depending on where you’re located, we offer next day delivery. Check your status on this link
Honeywell 900C73R-0000-41 Redundant Controller Module
The Honeywell 900C73R-0000-41, also cataloged as the 900C73R Redundant Controller Module, operates as a dedicated hardware component for controller synchronization, logic execution, and process data handling within the Honeywell ControlEdge HC900 system.
Hardware Specifications
Parameter
Specification
Model
900C73R-0000-41
Brand
Honeywell
Origin
Not specified in provided data
Product Type
Redundant Controller Module
Series
ControlEdge HC900
Device Function
Redundant controller processing, logic execution, and system coordination
Mounting Type
HC900 rack or chassis installation
Diagnostics
Status indication and controller self-diagnostic functions
System Interface
ControlEdge HC900 controller backplane communication
Process Control Communication and Loop Management
The Honeywell 900C73R-0000-41 manages controller operations through the ControlEdge HC900 architecture and exchanges control data through the controller backplane. The module supports process control strategies, sequence execution, and system status management.
For process instrumentation integration, Honeywell controller platforms support communication methods including 4-20 mA HART loop protocol and FOUNDATION Fieldbus / Profibus PA connectivity when compatible interface modules are installed. Channel-to-channel isolation depends on the installed I/O module design and field wiring configuration.
The redundant controller arrangement allows synchronized controller operation and supports controlled transfer between active and standby processing units. System diagnostics monitor operating conditions and provide status information for maintenance activities.
Frequently Asked Questions
Q: Does the 900C73R-0000-41 support redundant controller configurations?
A: Yes. The 900C73R designation identifies a redundant controller configuration component within the ControlEdge HC900 platform. The module operates with compatible redundant controller hardware arrangements.
Q: Can the module connect directly to field transmitters?
A: No. The 900C73R-0000-41 performs controller processing functions. Field signal connections require compatible HC900 I/O modules.
Q: What installation factors affect controller communication performance?
A: Proper rack installation, backplane connection integrity, grounding practices, and correct module placement affect controller communication performance.
Field Installation Guidelines
Install the Honeywell 900C73R-0000-41 in an approved ControlEdge HC900 rack position according to the system hardware configuration.
Verify that the rack backplane connectors remain clean and properly aligned before module insertion. Confirm that power isolation procedures are completed before installation or removal.
Separate controller communication wiring from high-voltage power cables to reduce electrical interference. Apply standard industrial grounding practices and connect shielded cables according to the site wiring specification.
Check controller status indicators after installation. Confirm that redundancy synchronization, module diagnostics, and communication status operate within the expected controller configuration.
11 in stock
Delivery within 48 hours, pay afterwards
Mid weeks Monday to friday we offer next day delivery if the product is on stock and exceptions on holidays.
Weekends We offer no deliveries in the weekends.
International Depending on where you’re located, we offer next day delivery. Check your status on this link
11 in stock
Delivery within 48 hours, pay afterwards
Mid weeks Monday to friday we offer next day delivery if the product is on stock and exceptions on holidays.
Weekends We offer no deliveries in the weekends.
International Depending on where you’re located, we offer next day delivery. Check your status on this link
Honeywell 900C70-0360-00 ControlEdge HC900 CPU Module
The Honeywell 900C70-0360-00, also cataloged as the 900C70 CPU Module, operates as a dedicated hardware component for control execution, logic processing, and data communication within the Honeywell ControlEdge HC900 system.
Hardware Specifications
Parameter
Specification
Model
900C70-0360-00
Brand
Honeywell
Origin
USA
Operating Temp
0 deg C to 60 deg C
Power Consumption
Supplied through HC900 rack backplane
Product Series
ControlEdge HC900
Module Type
C70 CPU Module
Application
Process control, sequence logic execution, and data acquisition
Mounting Method
Direct rack slot installation
Communication Interface
Ethernet-based system communication interfaces
Diagnostics
Front-panel LED status indicators
Processing Function
Executes control strategies, loop algorithms, and sequential logic
Process Control Communication and Signal Handling
The Honeywell 900C70-0360-00 CPU module manages controller operations through the ControlEdge HC900 architecture. It processes configured control logic, coordinates I/O module data exchange, and maintains communication between field devices, engineering tools, and supervisory systems.
In addition, the module supports process instrumentation integration through the HC900 platform. The controller architecture allows connection with analog and digital I/O modules used for industrial signals, including 4-20 mA HART loop protocol applications, FOUNDATION Fieldbus integration, and Profibus PA communication environments when compatible interface modules are installed.
The CPU module supports channel data processing and system diagnostics through the controller backplane. Therefore, engineers can monitor module status, communication conditions, and controller operation through integrated diagnostic functions.
Frequently Asked Questions
Q: Does the 900C70-0360-00 support hot-swap replacement?A: The module is designed for installation in the Honeywell HC900 rack system. Hot-swap capability depends on the rack configuration, controller firmware, and system operating procedures.
Q: How does the CPU module receive operating power?A: The 900C70-0360-00 receives power through the HC900 rack backplane connection. The external power input connects to the rack power supply assembly rather than directly to the CPU module.
Q: Can the module operate with redundant controller configurations?A: The module supports HC900 controller architectures where redundancy functions are defined by the selected rack, firmware configuration, and compatible controller hardware.
Field Installation Guidelines
Install the 900C70-0360-00 CPU module in the designated HC900 rack slot and verify mechanical alignment before applying power.
Connect the rack grounding system according to industrial control panel practices. Keep communication wiring separated from high-voltage power cables to reduce electromagnetic interference.
Verify that the backplane connectors are clean and fully engaged before system startup. Confirm firmware compatibility between the CPU module and installed HC900 system components before configuration download.
During maintenance, isolate power sources according to site procedures before removing the module. Use proper ESD protection when handling the circuit board and connector surfaces.
11 in stock
Delivery within 48 hours, pay afterwards
Mid weeks Monday to friday we offer next day delivery if the product is on stock and exceptions on holidays.
Weekends We offer no deliveries in the weekends.
International Depending on where you’re located, we offer next day delivery. Check your status on this link
11 in stock
Delivery within 48 hours, pay afterwards
Mid weeks Monday to friday we offer next day delivery if the product is on stock and exceptions on holidays.
Weekends We offer no deliveries in the weekends.
International Depending on where you’re located, we offer next day delivery. Check your status on this link
Honeywell 900C50S-0460 HC900 CPU Module
Configured for safety HVAC control execution in Honeywell HC900 Hybrid Controller systems, the Honeywell 900C50S-0460 (900C50S-0460 CPU Module) provides direct processing and communication functions for controller operations, I/O management, and serial network interfaces.
Hardware Specifications
Parameter
Specification
Model
900C50S-0460
Brand
Honeywell
Product Type
CPU Module
System Platform
HC900 Hybrid Controller
Application Function
SIL-2 Safety HVAC Control Unit
Processor Memory
128 MB battery backed DDR2 RAM
Ethernet Interface
Dual Ethernet ports
Serial Interface
2 isolated RS-485 ports
I/O Capacity
Up to 512 points per controller
Analog or Digital I/O Capability
Up to 4068 analog or digital I/O points
Power Supply
24 VDC (18-36 V)
Power Consumption
15 W typical, 25 W maximum
Operating Temp
-40 deg C to +70 deg C
Weight
0.4 kg
Dimensions
13.7 x 3.6 x 5.4 cm
Origin
USA
Shipment Location
Xiamen, China
Tariff Code
8537101190
HC900 Controller Communication and Process Interface
The Honeywell 900C50S-0460 CPU module manages controller execution, data processing, and communication exchange within the HC900 Hybrid Controller architecture. It supports dual Ethernet communication channels and isolated RS-485 interfaces for connection with distributed control devices and field communication networks.
Furthermore, the module provides 128 MB battery backed DDR2 RAM for retaining controller data during power interruptions. The CPU processes logic execution, I/O scanning, and control sequence operations for connected HC900 input and output modules.
For Honeywell process control applications, the controller architecture supports industrial signal handling functions including 4-20 mA HART loop protocol integration, FOUNDATION Fieldbus and Profibus PA connectivity through compatible interface modules, and channel-to-channel isolation for field signal separation.
Frequently Asked Questions
Q: What communication interfaces are available on the Honeywell 900C50S-0460 CPU Module?A: The module provides dual Ethernet ports and 2 isolated RS-485 ports for controller communication and serial device integration.
Q: What memory configuration does the 900C50S-0460 use?A: The CPU module uses 128 MB battery backed DDR2 RAM for controller program storage and operational data retention.
Q: Can the 900C50S-0460 support large I/O configurations?A: The module supports up to 512 I/O points per controller and can manage analog or digital I/O configurations according to HC900 system architecture requirements.
Field Installation Guidelines
Install the Honeywell 900C50S-0460 CPU module in the designated HC900 controller rack position according to the system hardware configuration.
Connect Ethernet and RS-485 communication wiring using appropriate industrial cable routing practices. Keep communication cables separated from high-voltage power conductors to reduce electrical interference.
Terminate cable shields according to the site grounding standard. Avoid multiple grounding points on shielded communication cables unless the system design specifies a multi-point grounding method.
Verify the 24 VDC power supply polarity and voltage range before energizing the controller. Confirm that all connected I/O modules and communication interfaces match the configured HC900 firmware and hardware revision requirements.
11 in stock
Delivery within 48 hours, pay afterwards
Mid weeks Monday to friday we offer next day delivery if the product is on stock and exceptions on holidays.
Weekends We offer no deliveries in the weekends.
International Depending on where you’re located, we offer next day delivery. Check your status on this link
11 in stock
Delivery within 48 hours, pay afterwards
Mid weeks Monday to friday we offer next day delivery if the product is on stock and exceptions on holidays.
Weekends We offer no deliveries in the weekends.
International Depending on where you’re located, we offer next day delivery. Check your status on this link
Honeywell 900C50-0460 CPU Module
The Honeywell 900C50-0460, also cataloged as the 900C50-0460 CPU Module, operates as a dedicated controller component for execution of control logic, data processing, and communication tasks within the Honeywell ControlEdge HC900 platform.
Hardware Specifications
Parameter
Specification
Model
900C50-0460
Brand
Honeywell
Product Type
CPU Module / Controller
Series
ControlEdge HC900
Origin
USA
Weight
0.4 kg
Dimensions
13.7 x 3.8 x 5.4 cm
Operating Temp
0 deg C to +60 deg C (32 deg F to 140 deg F)
Storage Temp
-40 deg C to +85 deg C
Relative Humidity
5% to 95% non-condensing
Power Consumption
1100 mA maximum at 5 VDC
Communication Interfaces
2 x RS-485 ports, 2 x 10/100 Base-T Ethernet ports
Controller Platform
Honeywell ControlEdge HC900 Hybrid Controller
Function
Central CPU processing and control execution
Process Control Communication and Interface Features
The Honeywell 900C50-0460 CPU Module manages controller operations within the ControlEdge HC900 architecture. It executes application logic, handles I/O data exchange, and maintains communication between connected field devices and system components.
The module supports serial communication through two RS-485 interfaces and Ethernet communication through two 10/100 Base-T ports. Therefore, it allows connection with industrial instruments, operator interfaces, and supervisory systems using standard industrial communication methods.
For process control integration, Honeywell HC900 systems support distributed signal handling requirements, including analog and digital field connections. However, this CPU module functions primarily as the controller processor rather than a direct field signal acquisition device.
Frequently Asked Questions
Q: What communication interfaces are available on the Honeywell 900C50-0460?A: The module provides two RS-485 communication ports and two 10/100 Base-T Ethernet ports for controller networking and device communication.
Q: What is the maximum power consumption of the 900C50-0460 CPU Module?A: The module requires a maximum current load of 1100 mA at 5 VDC within the HC900 controller rack power system.
Q: Can the 900C50-0460 operate in industrial temperature environments?A: Yes. The specified operating temperature range is 0 deg C to +60 deg C, with storage capability from -40 deg C to +85 deg C.
Field Installation Guidelines
Install the 900C50-0460 module only in the designated Honeywell ControlEdge HC900 controller rack position.
Verify that the rack power supply meets the required 5 VDC backplane power conditions before installation. Ensure the module connector is fully seated to maintain proper backplane communication.
Use shielded communication cables for RS-485 wiring where electromagnetic interference exists. Connect cable shields according to the plant grounding standard and avoid routing communication cables parallel to high-current power conductors.
Before replacing or removing the CPU module, follow the approved controller shutdown procedure to prevent loss of application data or unexpected control interruption.
Confirm Ethernet cable termination, network addressing, and communication parameters before returning the controller to operational service.
11 in stock
Delivery within 48 hours, pay afterwards
Mid weeks Monday to friday we offer next day delivery if the product is on stock and exceptions on holidays.
Weekends We offer no deliveries in the weekends.
International Depending on where you’re located, we offer next day delivery. Check your status on this link
11 in stock
Delivery within 48 hours, pay afterwards
Mid weeks Monday to friday we offer next day delivery if the product is on stock and exceptions on holidays.
Weekends We offer no deliveries in the weekends.
International Depending on where you’re located, we offer next day delivery. Check your status on this link
Honeywell 900C31-0021 C30 CPU Module
Configured for logic execution and process control computation in the Honeywell ControlEdge HC900 Hybrid Controller platform, the Honeywell 900C31-0021 (900C31-0021 CPU C30 Module) provides direct processing and communication functions for the controller rack.
Hardware Specifications
Parameter
Specification
Model
900C31-0021
Brand
Honeywell
Product Type
CPU C30 Module
System Platform
ControlEdge HC900 Hybrid Controller
Origin
USA
Operating Temp
0 deg C to +60 deg C
Storage Temp
-40 deg C to +70 deg C
Operating Humidity
10% to 90% RH, non-condensing
Power Consumption
15 W typical
Power Supply
24 VDC supplied through system rack/backplane
Processor Function
Logic processing, sequencing, PID control, mathematical function execution
Communication Interface
Ethernet-based communication, Modbus TCP supported
Programming Environment
Honeywell Designer Software via Ethernet or serial connection
Mounting Method
HC900 rack/backplane installation
Diagnostics
Watchdog timer, status LEDs, internal system monitoring
Process Control Communication and Loop Management Features
The Honeywell 900C31-0021 CPU module manages controller execution cycles, I/O data processing, and communication tasks within the ControlEdge HC900 architecture. The module executes configured control strategies, including PID algorithms, sequence logic, and process calculation blocks.
For process instrumentation integration, the HC900 platform supports industrial signal handling functions associated with analog and digital I/O modules. The controller architecture supports integration with field devices using standard industrial communication methods, including 4-20 mA HART loop protocol and FOUNDATION Fieldbus / Profibus PA connectivity through compatible interface modules.
The CPU module maintains deterministic data exchange between controller resources and connected I/O assemblies. In addition, the rack-based design supports channel-to-channel isolation requirements through compatible I/O module configurations.
Frequently Asked Questions
Q: Does the 900C31-0021 CPU module support hot-swapping during controller operation?A: The CPU module installation and replacement procedure must follow Honeywell HC900 system maintenance requirements. Power isolation and controller state verification are required before removing the module.
Q: How does the CPU module communicate with HC900 I/O modules?A: The 900C31-0021 exchanges control data through the HC900 rack backplane interface. The CPU manages I/O scanning, control execution, and diagnostic information.
Q: What functions does the watchdog timer provide?A: The internal watchdog timer monitors CPU execution activity and assists system diagnostics by detecting abnormal processor operation.
Field Installation Guidelines
Install the 900C31-0021 module in the designated HC900 controller rack slot according to the system configuration manual.
Verify that the rack backplane connector is clean and correctly aligned before insertion.
Confirm the 24 VDC system power supply condition before energizing the controller.
Keep Ethernet communication wiring separated from high-voltage power cables to reduce electrical interference.
Use proper shield termination practices for communication and field signal wiring where applicable.
Verify firmware compatibility between the CPU module and the installed HC900 system configuration before commissioning.
Check status LEDs and diagnostic indicators after installation to confirm normal CPU operation.
11 in stock
Delivery within 48 hours, pay afterwards
Mid weeks Monday to friday we offer next day delivery if the product is on stock and exceptions on holidays.
Weekends We offer no deliveries in the weekends.
International Depending on where you’re located, we offer next day delivery. Check your status on this link
11 in stock
Delivery within 48 hours, pay afterwards
Mid weeks Monday to friday we offer next day delivery if the product is on stock and exceptions on holidays.
Weekends We offer no deliveries in the weekends.
International Depending on where you’re located, we offer next day delivery. Check your status on this link
Honeywell 900C30S-0460 HC900 CPU Module
The Honeywell 900C30S-0460, also cataloged as the 900C30S CPU Module, operates as a dedicated hardware component for controller execution, I/O processing, and communication management within the Honeywell HC900 Control System.
Hardware Specifications
Parameter
Specification
Model
900C30S-0460
Brand
Honeywell
Product Type
CPU Module
Series
HC900
Origin
USA
Weight
0.4 kg
Dimensions
13.7 x 3.6 x 5.4 cm
Operating Temp
-40 deg C to +70 deg C
Power Consumption
15 W typical, 25 W maximum
Power Supply
24 VDC (18-36 V)
CPU Memory
128 MB battery-backed DDR2 RAM
Ethernet Communication
Dual Ethernet ports
Serial Communication
2 isolated RS-485 ports
Maximum I/O Capacity
Up to 512 points per controller
Supported I/O Types
Analog and digital I/O
Input Voltage Range
90-264 VAC, 50/60 Hz system supply option
Process Control Communication and I/O Management
The Honeywell 900C30S-0460 CPU module manages controller execution, signal processing, and field I/O data exchange in the HC900 architecture. The module provides dual Ethernet communication interfaces for network connectivity and isolated RS-485 ports for serial device integration.
In addition, the CPU module supports I/O density scaling up to 512 points per controller. The battery-backed DDR2 memory maintains controller data storage during power interruption conditions. The hardware processes analog and digital signals through connected HC900 I/O modules while maintaining deterministic controller operation.
The module design supports process control communication requirements, including interface compatibility with industrial field devices using standard analog and serial communication methods. Channel isolation within connected I/O architectures helps reduce electrical interference between field circuits.
Frequently Asked Questions
Q: What memory configuration does the Honeywell 900C30S-0460 CPU Module use?A: The module uses 128 MB battery-backed DDR2 RAM for controller data retention and application execution.
Q: How does the 900C30S-0460 communicate with external devices?A: The CPU module provides dual Ethernet ports and 2 isolated RS-485 communication ports for controller networking and serial device connections.
Q: What power input does the Honeywell 900C30S-0460 require?A: The module operates from a 24 VDC power supply with an input range of 18-36 VDC.
Field Installation Guidelines
Install the 900C30S-0460 CPU module in the designated HC900 controller rack position according to the system hardware configuration.
Before installation, verify that the power supply voltage matches the specified 24 VDC input range. Disconnect power before inserting or removing the module to prevent electrical damage.
Connect Ethernet and RS-485 communication wiring using proper industrial cable routing practices. Keep communication cables separated from high-voltage power conductors to minimize electromagnetic interference.
Terminate RS-485 networks according to the system communication design and apply appropriate grounding methods for cable shields. Verify rack grounding, power polarity, and connector seating before controller startup.
After installation, check CPU status indicators, communication links, and connected I/O module recognition through the HC900 configuration environment.
11 in stock
Delivery within 48 hours, pay afterwards
Mid weeks Monday to friday we offer next day delivery if the product is on stock and exceptions on holidays.
Weekends We offer no deliveries in the weekends.
International Depending on where you’re located, we offer next day delivery. Check your status on this link
11 in stock
Delivery within 48 hours, pay afterwards
Mid weeks Monday to friday we offer next day delivery if the product is on stock and exceptions on holidays.
Weekends We offer no deliveries in the weekends.
International Depending on where you’re located, we offer next day delivery. Check your status on this link
Honeywell 900RR0-0300 HC900 Redundant CPM Rack
Configured for redundant controller processor mounting in the Honeywell HC900 Control System, the Honeywell 900RR0-0300 (900RR0-0300 Redundant CPM Rack) provides direct physical support and electrical interconnection for redundant CPM hardware assemblies.
Hardware Specifications
Parameter
Specification
Model
900RR0-0300
Brand
Honeywell
Product Type
Redundant CPM Rack
Series
HC900
Origin
USA
Weight
1.7 kg
Dimensions
13.7 x 26 x 5.4 cm
Operating Temp
0 deg C to +60 deg C (32 deg F to 140 deg F)
Extended Operating Temp
-40 deg C to +70 deg C
Power Consumption
24 VDC power input
Relative Humidity
5% to 95% non-condensing
Function
Redundant CPM Rack Assembly
Tariff Code
8537101190
Process Control Hardware Integration Features
The Honeywell 900RR0-0300 functions as a mechanical and electrical rack assembly for HC900 redundant CPM configurations. It provides the mounting structure and internal connections required for controller processor modules operating in redundant arrangements.
The rack assembly supports controlled power distribution through a 24 VDC input supply interface. In addition, the physical rack design maintains module alignment and backplane connection integrity during system operation.
For HC900 process control architectures, the rack supports deterministic module communication paths between controller components. Therefore, proper installation maintains stable backplane signal routing and controller redundancy operation.
The HC900 platform uses modular control hardware design principles. However, the 900RR0-0300 itself does not provide field signal conversion, HART communication, or FOUNDATION Fieldbus interface functions.
Frequently Asked Questions
Q: What is the primary function of the Honeywell 900RR0-0300?
A: The 900RR0-0300 is a redundant CPM rack assembly that provides mechanical mounting and electrical interconnection for redundant CPM controller hardware within the HC900 system.
Q: What power input does the 900RR0-0300 require?
A: The rack assembly uses a 24 VDC power input interface according to the provided technical specifications.
Q: Can the 900RR0-0300 operate in extended temperature environments?
A: Yes. The specified extended temperature range is -40 deg C to +70 deg C. Standard operating temperature is 0 deg C to +60 deg C.
Field Installation Guidelines
Install the 900RR0-0300 in the designated HC900 control cabinet location according to system rack layout requirements.
Verify that the mounting structure provides adequate mechanical support before installing CPM modules.
Confirm 24 VDC supply polarity and grounding before connecting power wiring.
Keep power cables separated from high-voltage switching conductors and high-noise sources to reduce electrical interference.
Maintain proper cable routing and avoid excessive bending stress on backplane and power connections.
Use appropriate cabinet grounding practices to maintain signal reference stability.
Inspect rack connectors for contamination or mechanical damage before module insertion.
Confirm redundant CPM module alignment before system power-up and controller initialization.
11 in stock
Delivery within 48 hours, pay afterwards
Mid weeks Monday to friday we offer next day delivery if the product is on stock and exceptions on holidays.
Weekends We offer no deliveries in the weekends.
International Depending on where you’re located, we offer next day delivery. Check your status on this link
11 in stock
Delivery within 48 hours, pay afterwards
Mid weeks Monday to friday we offer next day delivery if the product is on stock and exceptions on holidays.
Weekends We offer no deliveries in the weekends.
International Depending on where you’re located, we offer next day delivery. Check your status on this link
Honeywell 900R12R-0300 ControlEdge HC900 12 I/O Slot Rack
Configured for redundant power distribution in the Honeywell ControlEdge HC900 system, the Honeywell 900R12R-0300 (900R12R-0300 12 I/O Slot Rack) provides physical mounting and backplane connection for I/O modules. This rack assembly supports extended temperature operation from -40 deg C to +70 deg C.
Hardware Specifications
Parameter
Specification
Model
900R12R-0300
Brand
Honeywell
Product Type
I/O Rack
System Platform
ControlEdge HC900
Rack Capacity
12 I/O slots
Power Configuration
Redundant power support
Origin
USA
Weight
4 kg
Dimensions
13.7 x 51.1 x 15.1 cm
Operating Temp
-40 deg C to +70 deg C
Storage Temp
-40 deg C to +85 deg C
Relative Humidity
5% to 95% non-condensing
Power Consumption
Dependent on installed I/O modules and power supply configuration
Process Control Rack Architecture
The Honeywell 900R12R-0300 provides the mechanical structure and electrical backplane interface for ControlEdge HC900 I/O modules. Therefore, the rack maintains module positioning, power distribution paths, and communication connections between installed hardware units.
The rack supports redundant power configurations, which allows the control system design to include separate power sources for increased system availability. In addition, the extended temperature specification permits installation in industrial environments with wide operating temperature variation.
For Honeywell process control architectures, the rack assembly supports I/O expansion requirements while maintaining module alignment and backplane connectivity. Channel isolation, field signal processing, and HART or FOUNDATION Fieldbus functions depend on the installed I/O modules rather than the rack assembly itself.
Frequently Asked Questions
Q: How many modules can the 900R12R-0300 rack accommodate?A: The 900R12R-0300 provides 12 I/O module slots for compatible Honeywell ControlEdge HC900 modules.
Q: Does the rack provide redundant power support?A: Yes. The 900R12R-0300 rack assembly supports redundant power configurations within the ControlEdge HC900 system architecture.
Q: Can the rack operate in extended temperature conditions?A: Yes. The specified operating temperature range is -40 deg C to +70 deg C.
Field Installation Guidelines
Install the 900R12R-0300 on a suitable control cabinet mounting structure with sufficient mechanical support. Verify that the rack backplane connectors remain clean and free from contamination before inserting I/O modules.
Maintain proper separation between field wiring and power conductors to reduce electrical interference. Connect cabinet grounding according to the site electrical standard and verify the protective earth path before system power application.
Before startup, confirm that installed modules match the rack configuration and that redundant power connections follow the system wiring documentation. Check module seating, connector engagement, and cabinet environmental conditions during commissioning.
11 in stock
Delivery within 48 hours, pay afterwards
Mid weeks Monday to friday we offer next day delivery if the product is on stock and exceptions on holidays.
Weekends We offer no deliveries in the weekends.
International Depending on where you’re located, we offer next day delivery. Check your status on this link
