Motor drives and inverters control speed and torque in industrial motors. They improve efficiency, reduce energy costs, and keep production stable. We supply ABB, Siemens, Allen-Bradley, and other trusted brands with global availability.
15 in stock
Delivery within 48 hours, pay afterwards
Mid weeks Monday to friday we offer next day delivery if the product is on stock and exceptions on holidays.
Weekends We offer no deliveries in the weekends.
International Depending on where you’re located, we offer next day delivery. Check your status on this link
ABB CI858 DriveBus Communication Interface
Configured for DriveBus communication between ABB Drives, ABB Special I/O units, and an AC 800M controller, the ABB CI858 (CI858 DriveBus Communication Interface) provides the controller-side interface for ABB DriveBus networks. The interface operates as a DriveBus master at 8 Mbit/s and receives its power through the CEX-Bus from the processor unit.
Hardware Specifications
Parameter
Specification
Model
CI858
Product ID
3BSE018135R1
Brand
ABB
Product Type
DriveBus Communication Interface
Communication Protocol
ABB DriveBus
Master or Slave
Master
Transmission Speed
8 Mbit/s
Line Redundancy
No
Module Redundancy
No
Hot Swap
Yes
Used Together with HI Controller
No
Maximum Units on CEX-Bus
2
Connector
Optical
Power Supply
Via CEX-Bus from processor unit
24 V Consumption, Typical
200 mA
Operating Temperature
0 to +55 deg C
Storage Temperature
-40 to +70 deg C
Corrosion Protection
G3 compliant to ISA 71.04
Protection Class
IP20 according to EN60529, IEC 529
CE Marking
Yes
Marine Certificates
ABS, BV, DNV-GL, LR
RoHS Compliance
EU RoHS, UAE RoHS, CN RoHS
WEEE Compliance
Directive 2012/19/EU
Width
59 mm
Height
185 mm
Depth
127.5 mm
Weight Including Base
700 g
DriveBus Communication Characteristics
The CI858 provides the DriveBus communication path between an AC 800M controller and compatible ABB Drives and ABB Special I/O units. The interface operates as the network master and supports an 8 Mbit/s transmission rate.
ABB designed DriveBus for sectional drive applications, including ABB rolling mill drive systems and paper machine control systems. Therefore, the CI858 handles the controller-side communication interface without requiring a separate external power source.
The CI858 receives operating power through the CEX-Bus from the processor unit. Its typical 24 V consumption is 200 mA. The interface supports hot swap, while the specified configuration provides no line redundancy or module redundancy.
The optical connector provides the physical DriveBus connection. The CEX-Bus supports a maximum of two CI858 units according to the supplied technical data.
Industrial Control and Drive Interface
The CI858 belongs to the ABB AC 800M communication interface architecture and uses the CEX-Bus for internal controller communication. Consequently, installation must maintain the required CEX-Bus connection between the processor unit and communication interface.
For DriveBus applications, the communication interface should be configured according to the connected ABB Drive system and controller application. The supplied data specifies DriveBus at 8 Mbit/s and identifies the CI858 as the master device.
This interface does not use an external power supply. Instead, the processor unit supplies the CI858 through the CEX-Bus, while the optical connector provides the external communication path.
Frequently Asked Questions (FAQ)
Q: Does the CI858 require an external power supply?A: No. The CI858 receives power from the AC 800M processor unit through the CEX-Bus. The typical 24 V consumption is 200 mA.
Q: What communication protocol and transmission speed does the CI858 use?A: The CI858 uses ABB DriveBus and operates at a specified transmission speed of 8 Mbit/s.
Q: Does the CI858 support hot swap and redundant operation?A: The CI858 supports hot swap. The supplied specifications state that neither line redundancy nor module redundancy is provided.
Field Installation Guidelines
Install the CI858 within the specified operating temperature range of 0 to +55 deg C.
Maintain the IP20 installation environment and provide suitable enclosure protection for the complete control assembly.
Connect the CI858 to the AC 800M CEX-Bus according to the controller hardware configuration.
Do not add an external power supply to the CI858 when using the specified CEX-Bus power arrangement.
Connect the optical DriveBus interface using compatible optical cabling and approved connectors.
Route communication cabling separately from high-current power conductors where practical to reduce electromagnetic interference.
Maintain proper cabinet grounding and bonding for the controller enclosure and associated drive equipment.
Verify the DriveBus master configuration before placing connected ABB Drives or Special I/O units into operation.
Confirm the CEX-Bus configuration when installing more than one CI858, as the supplied specification permits a maximum of two units on the CEX-Bus.
Observe the specified storage range of -40 to +70 deg C when storing the module before installation.
15 in stock
Delivery within 48 hours, pay afterwards
Mid weeks Monday to friday we offer next day delivery if the product is on stock and exceptions on holidays.
Weekends We offer no deliveries in the weekends.
International Depending on where you’re located, we offer next day delivery. Check your status on this link
4 in stock
Delivery within 48 hours, pay afterwards
Mid weeks Monday to friday we offer next day delivery if the product is on stock and exceptions on holidays.
Weekends We offer no deliveries in the weekends.
International Depending on where you’re located, we offer next day delivery. Check your status on this link
DescriptionThe Siemens 6SE7033-7EG84-1JF1 is an Inverter Control Module designed for use within the SIMOVERT MASTERDRIVES series. This component, specifically identified as an IGD4 (Insulated Gate Driver) module, serves as a critical interface for power regulation and control in high-performance industrial drive applications. It is engineered to manage power conversion processes for 3-phase AC systems operating within the 380-460V range, or DC systems within the 510-620V range, supporting current ratings up to 370A.Features
Designed for integration with Siemens SIMOVERT MASTERDRIVES systems.
IGD4 control architecture for precise power semiconductor gate driving.
Supports wide input voltage ranges for both AC and DC power configurations.
Robust construction suitable for demanding industrial environments.
Optimized for high-current applications up to 370A.
ApplicationsThis control module is primarily utilized in industrial automation environments where variable speed control and precise motor management are required. Typical applications include heavy-duty conveyor systems, large-scale pump and fan control, and industrial manufacturing machinery where the SIMOVERT MASTERDRIVES platform is deployed.Technical Specifications
Model
6SE7033-7EG84-1JF1
Component Type
Inverter Control Module (IGD4)
AC Input Voltage
380-460V
DC Input Voltage
510-620V
Frequency
50/60 Hz
Current Rating
370A
Manufacturer
Siemens
Tariff Code
8537101190
Installation Guidelines
Ensure the drive system is fully powered down and capacitors are discharged before attempting to install or remove the control module.
Handle the module using ESD-safe practices to prevent damage to sensitive electronic components.
Verify that the module is firmly seated in the designated slot to ensure proper electrical contact with the backplane.
Ensure adequate ventilation around the drive enclosure to maintain operating temperatures within the manufacturer's specified limits.
Check all cable connections for secure fitment and ensure that control wiring is routed away from high-power cables to minimize electromagnetic interference (EMI).
FAQIs this module compatible with all MASTERDRIVES units?This module is specific to the 6SE70 series. Please verify your drive's order code and hardware revision to ensure compatibility with the IGD4 control module.What should I do if the module displays a fault code?If a fault occurs, consult the SIMOVERT MASTERDRIVES technical manual for your specific drive frame size. Fault codes associated with the IGD module often indicate issues with gate signal feedback or power stage synchronization.
4 in stock
Delivery within 48 hours, pay afterwards
Mid weeks Monday to friday we offer next day delivery if the product is on stock and exceptions on holidays.
Weekends We offer no deliveries in the weekends.
International Depending on where you’re located, we offer next day delivery. Check your status on this link
2 in stock
Delivery within 48 hours, pay afterwards
Mid weeks Monday to friday we offer next day delivery if the product is on stock and exceptions on holidays.
Weekends We offer no deliveries in the weekends.
International Depending on where you’re located, we offer next day delivery. Check your status on this link
DescriptionThe Siemens 3RK1301-0CB20-0AB4 is a high-feature (HF) electronic motor starter designed for the Simatic ET 200S distributed I/O system. This unit provides precise control and protection for motors within a current range of 2.4 A to 16.0 A. By integrating motor management directly into the ET 200S architecture, this starter simplifies control logic, reduces wiring complexity, and enables advanced diagnostic monitoring via Profibus DP.Features
High-feature (HF) electronic motor starter for Simatic ET 200S.
Supports direct-on-line (DOL) motor starting.
Integrated electronic overload and short-circuit protection.
Diagnostic reporting transmitted directly to the master PLC.
Supports autonomous control logic for deterministic operation.
Optimized for distributed I/O applications in automotive, packaging, and material handling.
Technical Specifications
Model
3RK1301-0CB20-0AB4
Current Range
2.4 A to 16.0 A
Control Voltage
24 VDC
Communication
Profibus DP
Operating Temperature
0 to 60 degC
Protection Type
Electronic overload and short-circuit monitoring
Installation Guidelines
Ensure the ET 200S base unit is properly mounted on a standard DIN rail before installing the motor starter module.
Verify that the 24 VDC control power supply is within specified tolerances to prevent erratic operation.
Always disconnect power before inserting or removing the module from the rack to prevent electrical arcing or damage to the backplane connectors.
Ensure proper grounding of the ET 200S station to minimize EMI interference, especially when operating in high-noise industrial environments.
Route communication cables separately from high-voltage power lines to maintain signal integrity on the Profibus DP network.
FAQWhat is the primary function of this module?This module acts as a distributed motor starter for the Siemens ET 200S system, providing both switching control and motor protection (overload/short-circuit) for motors up to 16 A.Does this unit require external wiring for diagnostics?No, diagnostic data is communicated directly to the master PLC via the Profibus DP network, eliminating the need for hard-wired diagnostic signals.Is this starter suitable for high-speed automated processes?Yes, its ability to handle autonomous control logic at the device level allows for deterministic start/stop operations, which is ideal for time-critical automation tasks.
2 in stock
Delivery within 48 hours, pay afterwards
Mid weeks Monday to friday we offer next day delivery if the product is on stock and exceptions on holidays.
Weekends We offer no deliveries in the weekends.
International Depending on where you’re located, we offer next day delivery. Check your status on this link
8 in stock
Delivery within 48 hours, pay afterwards
Mid weeks Monday to friday we offer next day delivery if the product is on stock and exceptions on holidays.
Weekends We offer no deliveries in the weekends.
International Depending on where you’re located, we offer next day delivery. Check your status on this link
Description
The Honeywell 620-0033 is a parallel link driver module designed for the IPC 620 Series industrial control systems. This module facilitates reliable parallel data communication between IPC 620 controller modules and associated I/O subsystems. Engineered for mission-critical environments, it ensures deterministic timing and high-integrity signal transmission, which are essential for maintaining operational stability in complex industrial processes.
Features
Designed for seamless integration with IPC 620 Series backplanes.
Provides robust parallel data interface capabilities for system expansion.
Includes internal signal conditioning and buffering to maintain data integrity.
Supports continuous operation in demanding industrial environments.
Features integrated diagnostics for fault detection and status monitoring.
Applications
This module is suitable for use in various industrial sectors, including power generation, petrochemical refining, mining operations, and automated manufacturing systems where reliable, high-speed parallel communication is required.
Technical Specifications
Model
620-0033
Brand
Honeywell
Series
IPC 620 Series
Product Type
Parallel Link Driver Module
Operating Temperature
0 to 60 deg C
Mounting
IPC 620 Series rack or backplane
Communication Method
Parallel bus link
Installation Guidelines
Ensure the system power is disconnected before installing or removing the module from the IPC 620 backplane.
Verify that the module is correctly seated in the rack to ensure proper electrical contact with the backplane bus.
Maintain adequate ventilation within the control cabinet to ensure the module operates within its specified temperature range (0 to 60 deg C).
Handle with care to prevent electrostatic discharge (ESD) damage to internal components.
Ensure all parallel cabling is routed away from high-EMI sources to maintain signal integrity.
FAQ
What is the primary function of the 620-0033 module?The 620-0033 acts as a parallel link driver, managing data communication between IPC 620 Series modules and peripheral I/O devices.
Is this module compatible with other IPC series?The 620-0033 is specifically engineered for the IPC 620 Series architecture. It is recommended to verify system compatibility with your specific IPC 620 rack configuration.
8 in stock
Delivery within 48 hours, pay afterwards
Mid weeks Monday to friday we offer next day delivery if the product is on stock and exceptions on holidays.
Weekends We offer no deliveries in the weekends.
International Depending on where you’re located, we offer next day delivery. Check your status on this link
4 in stock
Delivery within 48 hours, pay afterwards
Mid weeks Monday to friday we offer next day delivery if the product is on stock and exceptions on holidays.
Weekends We offer no deliveries in the weekends.
International Depending on where you’re located, we offer next day delivery. Check your status on this link
The Emerson HD11010-3A is a high-frequency switching rectifier module engineered for reliable DC power supply in critical industrial infrastructure. Designed for high power density and efficiency, this module is widely utilized in DC power screens, charging systems, and power distribution applications within substations, hydropower plants, and manufacturing facilities.Features
High-frequency switching technology for improved efficiency and compatibility.
Wide AC input voltage range (85-300V AC) providing strong adaptability to varying grid conditions.
Step-less current limiting for high-precision battery charging.
Built-in CPU for distributed control and enhanced anti-interference capability.
Integrated protection and warning mechanisms supporting remote monitoring functions.
Robust design suitable for harsh industrial environments with high reliability.
Applications
Power distribution rooms and DC power screens.
Substation and power plant control systems.
Industrial automation and robotic assembly lines.
Chemical and process plant instrumentation power.
Critical infrastructure requiring continuous, stable DC power.
Technical Specifications
Model
HD11010-3A
Input Voltage
85-300V AC
Output Voltage
24V DC (Nominal)
Output Current
10A
Output Power
480-600W
Efficiency
>90% typical
Operating Temperature
-40 degC to +75 degC
Storage Temperature
-40 degC to +85 degC
Humidity
5-95% RH non-condensing
Installation Guidelines
Ensure the power cabinet slot is compatible with the module and free of debris.
Inspect the module for physical damage and verify that rear connector pins are straight before insertion.
Align the module with the shelf guide rails and slide it firmly into the slot until the rear connector is fully seated.
Tighten all front-panel captive screws to secure the module and ensure proper electrical grounding.
Always power down the cabinet before inserting or removing the module to prevent electrical arcing.
FAQWhat is the primary use of the HD11010-3A?The HD11010-3A is a high-frequency switching rectifier module used primarily for charging DC screens in power, utility, and telecommunication systems.Is this module suitable for extreme temperatures?Yes, it is designed for industrial use with an operating temperature range of -40 degC to +75 degC, making it suitable for demanding environments.Does this module support remote monitoring?Yes, the module features built-in CPU control and provides comprehensive protection and warning measures that support remote monitoring functions.
4 in stock
Delivery within 48 hours, pay afterwards
Mid weeks Monday to friday we offer next day delivery if the product is on stock and exceptions on holidays.
Weekends We offer no deliveries in the weekends.
International Depending on where you’re located, we offer next day delivery. Check your status on this link
Description
The GE Fanuc A06B-6079-H206 (SVM2-40X2) is a high-performance dual-axis servo amplifier from the Alpha series, engineered for precision motion control in CNC machining centers and automated manufacturing systems. This unit provides synchronized multi-axis control, supporting complex robotics and high-speed milling operations. By utilizing advanced digital control loops and efficient power conversion, the amplifier ensures high torque stability and rapid acceleration, minimizing mechanical resonance and reducing unscheduled equipment downtime in demanding production environments.
Features
Dual-axis configuration for independent control of two servomotors in a single housing.
High-speed proprietary servo interface for real-time position and velocity feedback.
Advanced thermal management system to mitigate heat accumulation during intensive duty cycles.
Optimized for high-precision trajectory adherence in aerospace and automotive applications.
Robust power stages designed for high torque stability and rapid acceleration.
Applications
This servo amplifier is widely used in industrial CNC machinery, including multi-axis milling centers, robotic assembly lines, and high-speed automated production equipment requiring tight tolerances and synchronized motion.
Technical Specifications
Model
A06B-6079-H206
Series
Alpha Series (SVM2-40X2)
Input Voltage
230 VAC
Output Current
12.5 A per axis
Number of Axes
2
Cooling Method
Forced Air Cooling
Operating Temperature
0 to 55 degC
Storage Temperature
-20 to 65 degC
Mounting
Vertical Panel Mount
Installation Guidelines
Ensure the unit is mounted vertically on a panel to allow for proper airflow through the integrated cooling system.
Maintain adequate clearance around the unit to prevent thermal buildup and ensure efficient heat dissipation.
Always disconnect the main power supply and verify zero energy state before performing any wiring, installation, or maintenance.
Use shielded cables for signal and feedback connections to minimize electromagnetic interference (EMI).
Ensure all ground connections are secure and comply with local electrical safety standards to protect against electrical noise and fault conditions.
Handle with care to avoid damage to the internal power electronics and connectors.
FAQ
Is this unit compatible with all GE Fanuc Alpha series motors?
The A06B-6079-H206 is designed for specific Alpha series motor pairings. Please verify your motor model and system configuration against the GE Fanuc maintenance manual to ensure compatibility.
What is the primary cooling requirement for this amplifier?
This unit utilizes forced air cooling. Ensure that the cabinet ventilation system is functional and that the air intake/exhaust paths are not obstructed by wiring or other components.
10 in stock
Delivery within 48 hours, pay afterwards
Mid weeks Monday to friday we offer next day delivery if the product is on stock and exceptions on holidays.
Weekends We offer no deliveries in the weekends.
International Depending on where you’re located, we offer next day delivery. Check your status on this link
DescriptionThe General Electric A06B-0143-B175 is a high-performance AC servo motor designed for precision motion control in CNC machinery. This unit, part of the A12/3000 series, features an integrated brake and a straight shaft configuration, providing reliable torque and positioning accuracy for demanding industrial automation applications.Features
Integrated brake for secure holding and emergency stopping
Straight shaft design for standard mechanical coupling
Rated for 2.8 kW power output
Optimized for 3000 RPM operation
Robust 3-phase AC design
ApplicationsThis servo motor is primarily utilized in CNC machine tools, robotic systems, and automated manufacturing lines requiring high-speed, high-precision rotational control.Technical Specifications
Model
A06B-0143-B175
Rated Voltage
155 V
Rated Current
12 A (rms)
Max Current
20 A (rms)
Rated Power
2.8 kW
Rated Speed
3000 RPM
Frequency
200 Hz
Power Factor
0.95
Operating Temperature
0 degC to +40 degC
Storage Temperature
-20 degC to +85 degC
Humidity
20 to 90 % RH (non-condensing)
Installation Guidelines
Ensure the motor is mounted on a rigid, vibration-free surface to prevent mechanical resonance.
Verify that the shaft alignment is precise to avoid excessive radial or axial load on the bearings.
Use shielded cables for power and encoder connections to minimize electromagnetic interference (EMI).
Ensure adequate ventilation around the motor housing to maintain operating temperatures within the specified 0 to 40 degC range.
Always disconnect power before performing any wiring, inspection, or maintenance on the motor or its drive interface.
Confirm that the grounding path is secure and follows local electrical safety standards to prevent ground loops.
FAQWhat is the primary function of the A06B-0143-B175?This is an AC servo motor used for precise motion control in CNC systems, capable of delivering 2.8 kW of power at 3000 RPM.Does this motor include a brake?Yes, this model (A06B-0143-B175) is equipped with an integrated brake for holding applications.What are the environmental requirements for this motor?The motor should be operated in an ambient temperature range of 0 degC to 40 degC with a non-condensing humidity level between 20% and 90%.
10 in stock
Delivery within 48 hours, pay afterwards
Mid weeks Monday to friday we offer next day delivery if the product is on stock and exceptions on holidays.
Weekends We offer no deliveries in the weekends.
International Depending on where you’re located, we offer next day delivery. Check your status on this link
1 in stock
Delivery within 48 hours, pay afterwards
Mid weeks Monday to friday we offer next day delivery if the product is on stock and exceptions on holidays.
Weekends We offer no deliveries in the weekends.
International Depending on where you’re located, we offer next day delivery. Check your status on this link
DescriptionThe Allen-Bradley 1336-BDB-SP34D is a replacement gate drive printed circuit board (PCB) designed for use within the 1336STG series variable frequency drive systems. This component is specifically rated for 575V applications with a power capacity of 125HP. As a critical control component, this gate drive board manages the switching signals for the drive's power semiconductors, ensuring precise motor control and operational stability in industrial environments.Features
Engineered for 1336STG series drive compatibility
Supports 575V AC input/output configurations
Rated for 125HP motor drive applications
Direct replacement for specified Allen-Bradley drive hardware
Robust PCB construction for industrial reliability
Technical Specifications
Manufacturer
Allen-Bradley
Model Number
1336-BDB-SP34D
Spare Model / Ref
74101-169-64
Component Type
Gate Drive PCB
Drive Series Compatibility
1336STG
Voltage Rating
575V
Power Rating
125HP
Weight
1.22 kg
Installation Guidelines
Safety First: Ensure all power to the 1336STG drive is completely disconnected and locked out before attempting to access or replace the gate drive board.
ESD Protection: Use an anti-static wrist strap and grounded work surface when handling the PCB to prevent damage to sensitive electronic components from electrostatic discharge.
Inspection: Before installation, verify that the replacement board is free of debris and that all pins are straight and undamaged.
Seating: Ensure the board is firmly seated in its designated slot within the drive chassis. Verify that all ribbon cables and connectors are securely locked into place.
Verification: After installation, perform a visual inspection of all connections before reapplying power. Follow the manufacturer's startup procedure for the 1336STG drive to ensure the new board is recognized and operating within parameters.
FAQIs this board compatible with other 1336 series drives?This gate drive board is specifically designed for the 1336STG series at the 575V/125HP rating. It is not recommended for use in other 1336 series drives unless explicitly specified by Allen-Bradley documentation, as gate drive timing and signal requirements vary by drive model and power rating.What should I do if the drive displays a fault after installation?If a fault persists, verify that all internal connectors are fully seated and that no pins were bent during installation. Ensure the drive firmware settings match the hardware configuration. If the fault remains, consult the 1336STG technical manual for specific error code diagnostics.
1 in stock
Delivery within 48 hours, pay afterwards
Mid weeks Monday to friday we offer next day delivery if the product is on stock and exceptions on holidays.
Weekends We offer no deliveries in the weekends.
International Depending on where you’re located, we offer next day delivery. Check your status on this link
10 in stock
Delivery within 48 hours, pay afterwards
Mid weeks Monday to friday we offer next day delivery if the product is on stock and exceptions on holidays.
Weekends We offer no deliveries in the weekends.
International Depending on where you’re located, we offer next day delivery. Check your status on this link
DescriptionThe Schneider Electric ATV930D18N4 is a high-performance variable speed drive from the Altivar Process ATV900 range. Designed for demanding industrial applications, this drive provides precise motor control and energy efficiency for 3-phase induction and synchronous motors. It is rated for 15kW output and operates within a supply voltage range of 380 to 480V.Features
Integrated braking unit for dynamic deceleration control.
IP21 degree of protection, suitable for standard industrial environments.
Forced convection cooling system for reliable thermal management.
Advanced motor control algorithms for high-torque applications.
Designed for seamless integration into industrial process automation systems.
Technical Specifications
Product Model
ATV930D18N4
Product Range
Altivar Process ATV900
Power Rating
15 kW
Supply Voltage
380...480 V (-15% to +10%)
Supply Frequency
50...60 Hz (+/- 5%)
Network Phases
3-phase
Degree of Protection
IP21 / UL Type 1
Cooling Type
Forced convection
Installation Guidelines
Ensure the drive is mounted in a vertical position to allow for proper airflow through the heatsink.
Maintain adequate clearance around the unit as specified in the installation manual to prevent overheating.
Use shielded cables for motor connections to minimize electromagnetic interference (EMI).
Ensure the drive is properly grounded to a common earth point to maintain electrical safety.
Always disconnect power and allow sufficient time for DC bus capacitors to discharge before performing any wiring or maintenance.
Verify that the supply voltage and frequency match the drive nameplate specifications before commissioning.
FAQWhat is the primary application for the ATV930D18N4?This drive is designed for industrial processes requiring high-performance motor control, such as pumps, fans, conveyors, and processing machinery where precise speed and torque regulation are essential.Does this model include a braking unit?Yes, the ATV930D18N4 comes equipped with an integrated braking unit, allowing for efficient dissipation of energy during motor braking cycles.
10 in stock
Delivery within 48 hours, pay afterwards
Mid weeks Monday to friday we offer next day delivery if the product is on stock and exceptions on holidays.
Weekends We offer no deliveries in the weekends.
International Depending on where you’re located, we offer next day delivery. Check your status on this link
5 in stock
Delivery within 48 hours, pay afterwards
Mid weeks Monday to friday we offer next day delivery if the product is on stock and exceptions on holidays.
Weekends We offer no deliveries in the weekends.
International Depending on where you’re located, we offer next day delivery. Check your status on this link
DescriptionThe ABB 3AFE64547992 is a specialized field kit designed for use with ABB drive systems. This kit provides the necessary PCMCIA hardware interface to enable communication between a PC and the drive, facilitating the use of the DriveWindow software suite for configuration, monitoring, and diagnostics.Features
Enables connectivity between PC and ABB drive hardware
Utilizes PCMCIA interface standard
Essential for DriveWindow software operation
Compact, field-ready design for maintenance and commissioning tasks
ApplicationsThis field kit is primarily used by field service engineers and maintenance technicians for the commissioning, parameterization, and troubleshooting of ABB industrial drives. It is a critical component for establishing a stable communication link during drive startup or when performing firmware updates and data logging.Technical Specifications
Product Model
3AFE64547992
Type
DriveWindow PCMCIA Field Kit
Manufacturer
ABB
Weight
0.28 kg
Installation Guidelines
Ensure the PCMCIA slot on the host computer is powered down or supports hot-swapping before insertion.
Verify that the appropriate DriveWindow software drivers are installed on the host PC prior to connecting the hardware.
Handle the PCMCIA card with care to avoid bending pins or damaging the connector interface.
Keep the connection cable away from high-voltage power lines and sources of electromagnetic interference (EMI) to ensure stable data transmission.
Store in a clean, dry environment when not in use to prevent oxidation of the connector contacts.
FAQWhat is the primary purpose of the 3AFE64547992 kit?This kit provides the physical hardware interface required to connect a computer to an ABB drive, allowing the DriveWindow software to communicate with the drive's internal control board.Is this kit compatible with all ABB drives?This kit is specifically designed for ABB drives that utilize the PCMCIA interface for external connectivity. Please verify your specific drive model's communication port requirements before use.
5 in stock
Delivery within 48 hours, pay afterwards
Mid weeks Monday to friday we offer next day delivery if the product is on stock and exceptions on holidays.
Weekends We offer no deliveries in the weekends.
International Depending on where you’re located, we offer next day delivery. Check your status on this link
8 in stock
Delivery within 48 hours, pay afterwards
Mid weeks Monday to friday we offer next day delivery if the product is on stock and exceptions on holidays.
Weekends We offer no deliveries in the weekends.
International Depending on where you’re located, we offer next day delivery. Check your status on this link
DescriptionThe Allen-Bradley 1746-HS is a specialized Motion Controller Module designed for the SLC 500 programmable controller platform. Known as the IMC 110, this module provides high-speed motion control capabilities, enabling precise positioning and velocity control for industrial automation applications. Although now discontinued by the manufacturer, it remains a critical component for maintaining legacy SLC 500 control systems.Features
High-speed motion control for SLC 500 systems.
Integrated IMC 110 functionality for motion profiling and positioning.
Supports 24 VDC input signals with frequencies up to 300 kHz.
Isolated user-side power outputs for flexible interface configurations.
Designed for direct integration into the SLC 500 I/O chassis backplane.
ApplicationsThis module is typically utilized in industrial environments requiring precise motion control, such as packaging machinery, assembly lines, material handling systems, and specialized manufacturing equipment where the SLC 500 platform serves as the primary controller.Technical Specifications
Product Model
1746-HS
Module Type
IMC 110 Motion Controller
Backplane Current (5 VDC)
0.300 A
Backplane Current (24 VDC)
0.104 A
Isolated User Side (5 VDC)
0.150 A
Isolated User Side (15 VDC)
0.030 A / 0.20 A
Input Voltage
24 VDC
Max Input Frequency
300 kHz
Installation Guidelines
Ensure the SLC 500 chassis power is disconnected before inserting or removing the 1746-HS module.
Handle the module using proper ESD (Electrostatic Discharge) prevention measures to avoid damaging sensitive internal circuitry.
Verify that the module is fully seated in the chassis slot and that the retaining screws are tightened to ensure a secure connection to the backplane.
Route signal cables away from high-voltage lines and sources of electromagnetic interference (EMI) to maintain signal integrity.
Ensure adequate ventilation within the enclosure to prevent overheating during operation.
FAQIs the 1746-HS still supported by Allen-Bradley?No, the 1746-HS has been discontinued by the manufacturer. It is typically sourced through surplus or refurbished inventory for maintenance of existing systems.What is the primary function of the 1746-HS?The 1746-HS is an IMC 110 motion controller module that allows the SLC 500 PLC to manage motion control tasks, such as high-speed pulse outputs and position tracking.
8 in stock
Delivery within 48 hours, pay afterwards
Mid weeks Monday to friday we offer next day delivery if the product is on stock and exceptions on holidays.
Weekends We offer no deliveries in the weekends.
International Depending on where you’re located, we offer next day delivery. Check your status on this link
6 in stock
Delivery within 48 hours, pay afterwards
Mid weeks Monday to friday we offer next day delivery if the product is on stock and exceptions on holidays.
Weekends We offer no deliveries in the weekends.
International Depending on where you’re located, we offer next day delivery. Check your status on this link
DescriptionThe Siemens 6SE7012-0TP50 is a high-performance AC/DC power converter module within the SIMOVERT MASTERDRIVES MC (Motion Control) series. Engineered for precision servo applications, this unit facilitates energy conversion between 510-650 VDC input and a variable 0-480 VAC three-phase output. It is designed to meet the rigorous demands of automated production lines, textile machinery, and high-speed packaging systems. By providing precise torque and speed control for permanent magnet synchronous motors or induction motors, this drive optimizes machine throughput and minimizes unscheduled downtime in heavy industrial environments such as automotive manufacturing and metal processing.Features
High-Speed Control: Utilizes advanced motion control loops with high dynamic response times, supporting synchronized multi-axis movements.
IGBT Technology: Internal circuitry employs insulated-gate bipolar transistors for efficient pulse-width modulation (PWM) switching.
Thermal Management: Compact chassis designed for vertical mounting with integrated cooling pathways to maintain stability during continuous operation.
System Integration: Designed to interface with SIMATIC S7 controllers via standard fieldbus protocols for transparent diagnostics and parameterization.
ApplicationsThis drive is suitable for a variety of industrial motion control tasks, including:
Automated assembly and production lines
High-speed packaging and labeling machinery
Textile manufacturing equipment
Metal processing and material handling systems
Technical Specifications
Model
6SE7012-0TP50
Series
SIMOVERT MASTERDRIVES MC
Input Voltage
510-650 VDC
Output Voltage
0-480 VAC (3-Phase)
Output Frequency
0-400 Hz
Rated Current
2 A
Power Rating
0.75 kW (1 HP)
Operating Temperature
0 to 50 deg C
Status
Discontinued (09/30/2020)
Installation Guidelines
Mounting: Ensure vertical installation to allow for proper airflow through the cooling channels. Maintain required clearance around the unit as specified in the original Siemens manual.
Environment: Install in a clean, dry, and vibration-free enclosure. Ensure ambient temperature does not exceed 50 deg C.
Wiring: Use shielded cables for motor connections to minimize EMI. Ensure proper grounding of the drive chassis to the common machine ground point.
Safety: Always disconnect power and wait for the DC bus capacitors to discharge completely before performing any wiring or maintenance.
FAQIs this drive still supported by Siemens?The 6SE7012-0TP50 was officially discontinued by the manufacturer on September 30, 2020. While support may be limited, it remains a critical component for legacy systems, and refurbished or surplus units are often used for maintenance and repair.What type of motors can this drive control?This unit is designed to control both permanent magnet synchronous motors and standard induction motors, providing precise torque and speed regulation.
6 in stock
Delivery within 48 hours, pay afterwards
Mid weeks Monday to friday we offer next day delivery if the product is on stock and exceptions on holidays.
Weekends We offer no deliveries in the weekends.
International Depending on where you’re located, we offer next day delivery. Check your status on this link
DescriptionThe Siemens 505-7003 is a specialized High Speed Counter module designed for the TI 505 programmable logic controller series. This module is engineered to interface with high-frequency pulse inputs, such as those from encoders or proximity sensors, providing precise counting and positioning data to the control system. It is a critical component for motion control and high-speed process monitoring applications where standard PLC scan times are insufficient for pulse capture.Features
High-speed pulse counting capability up to 100 kHz.
Designed for seamless integration with the Siemens TI 505 series I/O rack architecture.
Supports encoder input processing for accurate position or rate monitoring.
Includes 8 integrated outputs for high-speed triggering based on counter values.
Discontinued by manufacturer; ideal for legacy system maintenance and replacement.
ApplicationsThis module is typically utilized in industrial automation environments requiring high-speed event counting, such as:
Conveyor belt speed monitoring and synchronization.
Packaging and bottling line pulse counting.
Rotary encoder feedback for motion control axes.
Flow metering and totalizing applications.
Technical Specifications
Product Model
505-7003
Manufacturer
Siemens
Module Type
High Speed Counter / Encoder Module
Max Frequency
100 kHz
Output Count
8
Installation Guidelines
Ensure the PLC rack power is disconnected before inserting or removing the module to prevent electrical damage.
Verify that the module is fully seated in the backplane connector to ensure reliable communication with the CPU.
Use shielded twisted-pair cabling for high-speed pulse inputs to minimize electromagnetic interference (EMI).
Route signal cables away from high-voltage power lines and motor drives to prevent signal noise.
Ensure the module is installed in a clean, dry environment within the specified operating temperature range of the TI 505 system.
FAQIs the 505-7003 still supported by Siemens?No, the 505-7003 has been discontinued by the manufacturer. It is primarily available through secondary markets for the maintenance of legacy TI 505 control systems.What is the maximum frequency this module can handle?The 505-7003 is rated for a maximum input frequency of 100 kHz.
DescriptionThe Emerson Motion Control EN-204 (EN-204-00-000) is a high-performance digital servo drive engineered for precision motion control applications. As part of the Control Techniques product family, this compact, standalone drive provides advanced torque, velocity, and position control for brushless servo motors. It is specifically designed to meet the demands of high-speed packaging, automated assembly, and CNC machining, utilizing high-speed digital signal processing to ensure bandwidth and accuracy. The 00-000 configuration represents the standard base model, optimized for reliable core drive functionality in sophisticated industrial automation environments.Features
Digital signal processing for high-bandwidth motion control.
Supports multiple control modes: Torque, Velocity, and Position.
Programmable I/O for flexible integration with PLCs and motion controllers.
Internal firmware support for complex motion profiles, including electronic gearing and camming.
Integrated protection circuits for over-voltage, over-current, and thermal monitoring.
Front-panel diagnostic LEDs for real-time status and fault code reporting.
Applications
High-speed automated packaging machinery.
Precision CNC machining centers.
Automated assembly and robotics.
Material handling and conveyor systems.
Technical Specifications
Parameter
Specification
Model
EN-204 (EN-204-00-000)
Drive Type
Digital Brushless Servo Drive
Continuous Output Current
4 A (RMS)
Peak Output Current
8 A (RMS)
Input Voltage
100 - 240 VAC (Single Phase)
Input Frequency
50 / 60 Hz
Feedback Support
Encoder (Incremental/SinCos), Resolver (via adapter)
Operating Temperature
0 to 50 deg C
Ingress Protection
IP 20
Communication
RS-232 / RS-485
Installation Guidelines
Ensure the drive is mounted in a clean, dry environment with adequate clearance for natural convection cooling.
Use shielded cables for motor and feedback connections to minimize EMI interference.
Verify that the input power supply matches the 100-240 VAC range before applying power.
Ensure proper grounding of the drive chassis to a common earth point to prevent noise issues.
Always power down the unit and wait for internal capacitors to discharge before performing wiring or maintenance.
Handle with standard ESD precautions to protect internal logic components.
FAQWhat does the 00-000 suffix indicate?The 00-000 suffix denotes the standard base configuration of the EN-204 drive, which includes the core control functionality without additional factory-fitted expansion modules or customized hardware options.Is this drive compatible with my existing PLC?The EN-204 features programmable I/O and standard communication interfaces (RS-232/RS-485), allowing it to interface with most industrial PLCs and motion controllers capable of standard digital or serial communication protocols.
9 in stock
Delivery within 48 hours, pay afterwards
Mid weeks Monday to friday we offer next day delivery if the product is on stock and exceptions on holidays.
Weekends We offer no deliveries in the weekends.
International Depending on where you’re located, we offer next day delivery. Check your status on this link
DescriptionThe PCM-11 (PCM11) is a high-performance Application Motion Program Controller designed to provide advanced motion control capabilities within the Emerson and Control Techniques ecosystems. Functioning as a specialized processor module, it executes complex motion profiles and logic programs independently of the primary drive control loop. This module is essential in high-precision industrial sectors such as automated assembly, packaging, and high-speed material handling, where synchronized multi-axis coordination is required. By offloading motion-specific tasks from the main controller, the PCM-11 significantly reduces system overhead and increases the deterministic response of the machinery, playing a central role in maximizing throughput and minimizing mechanical wear through optimized motion trajectories.Features
Dedicated microprocessor for high-speed program execution and real-time task management.
Onboard non-volatile flash memory for storage of sophisticated motion programs and parameters.
Direct interface with drive internal bus for instantaneous parameter adjustment and high-resolution feedback monitoring.
Supports electronic camming, gearing, and precise positioning functions.
Ruggedized hardware design for reliable operation in demanding thermal environments.
Acts as a localized master in distributed control networks.
ApplicationsThe PCM-11 is typically utilized in industrial automation environments requiring high-speed, multi-axis synchronization. Common applications include:
Automated assembly lines
High-speed packaging machinery
Material handling and conveyor systems
Precision positioning and electronic gearing applications
Technical Specifications
Model
PCM-11
Brand
Emerson / Control Techniques
Product Category
Application Motion Program Controller
Operating Temperature
0 to 50 deg C
Storage Temperature
-20 to 70 deg C
Power Supply
Internal via drive backplane
Programming Port
RS485 / Serial Interface
Memory Type
Flash memory
Cooling
Natural convection
Enclosure Rating
IP 20
Installation Guidelines
Ensure the drive is powered down and isolated before inserting or removing the PCM-11 module.
Handle the module using proper ESD (Electrostatic Discharge) precautions to prevent damage to internal circuitry.
Ensure the module is fully seated in the drive backplane slot to maintain reliable bus communication.
Maintain adequate clearance around the module to allow for natural convection cooling; do not obstruct ventilation paths.
Route communication cables away from high-voltage power lines and sources of electromagnetic interference (EMI) to ensure signal integrity.
Verify that the ambient temperature remains within the specified 0 to 50 deg C range during operation.
FAQWhat is the primary function of the PCM-11 module?The PCM-11 serves as an application motion program controller that offloads complex motion logic from the main drive processor to improve system response time and coordination.How is the PCM-11 powered?The module receives its power supply directly through the drive backplane connection, requiring no external power wiring.What programming environment is used for this module?The PCM-11 supports programs typically developed using specialized motion languages or IEC 61131-3 compliant environments, which are loaded via the RS485/Serial interface.
9 in stock
Delivery within 48 hours, pay afterwards
Mid weeks Monday to friday we offer next day delivery if the product is on stock and exceptions on holidays.
Weekends We offer no deliveries in the weekends.
International Depending on where you’re located, we offer next day delivery. Check your status on this link
5 in stock
Delivery within 48 hours, pay afterwards
Mid weeks Monday to friday we offer next day delivery if the product is on stock and exceptions on holidays.
Weekends We offer no deliveries in the weekends.
International Depending on where you’re located, we offer next day delivery. Check your status on this link
DescriptionThe Woodward 5464-210 is a high-precision Actuator Driver module engineered for integration with Woodward MicroNet and NetCon control systems. This module serves as the critical interface between digital control logic and mechanical actuators, providing the high-current drive necessary for precise control of fuel valves and steam turbine nozzles. By facilitating rapid and accurate positioning of final control elements, the 5464-210 maintains tight closed-loop control, minimizes system oscillations, and prevents unplanned shutdowns in critical turbomachinery applications.Features
High-bandwidth output stage for driving proportional actuators with minimal thermal drift.
Supports LVDT and RVDT feedback configurations for precise position verification.
Integrated onboard diagnostics for monitoring open circuits, short circuits, and over-temperature conditions.
Robust, vibration-resistant architecture suitable for high-density industrial control cabinets.
Designed for low electromagnetic interference (EMI) to ensure signal integrity.
ApplicationsThe 5464-210 is widely deployed in power generation, oil and gas refineries, and large-scale mining operations. It is specifically utilized in governor systems requiring high-power amplification for industrial valve regulation and turbine control.Technical Specifications
Model
5464-210
Brand
Woodward
Module Type
Actuator Driver
Operating Temperature
-40 to 70 deg C
Installation Guidelines
Ensure the control system is powered down before inserting or removing the module from the rack.
Handle the module using proper ESD (Electrostatic Discharge) prevention protocols to protect sensitive internal circuitry.
Verify that all field wiring for LVDT/RVDT feedback is properly shielded to minimize noise interference.
Ensure the module is securely seated in the designated MicroNet or NetCon chassis slot to maintain proper backplane communication.
Maintain adequate ventilation in the control cabinet to ensure ambient temperatures remain within the specified -40 to 70 deg C range.
FAQWhat systems is the 5464-210 compatible with?The 5464-210 is designed for use with Woodward MicroNet and NetCon control platforms.Does this module support position feedback?Yes, the module supports feedback configurations including LVDT and RVDT inputs for accurate position monitoring.What should I do if the module reports a fault?The 5464-210 includes onboard diagnostics. Check the system logs for specific error codes related to open circuits, short circuits, or thermal conditions as indicated by the module's diagnostic status.
5 in stock
Delivery within 48 hours, pay afterwards
Mid weeks Monday to friday we offer next day delivery if the product is on stock and exceptions on holidays.
Weekends We offer no deliveries in the weekends.
International Depending on where you’re located, we offer next day delivery. Check your status on this link
6 in stock
Delivery within 48 hours, pay afterwards
Mid weeks Monday to friday we offer next day delivery if the product is on stock and exceptions on holidays.
Weekends We offer no deliveries in the weekends.
International Depending on where you’re located, we offer next day delivery. Check your status on this link
DescriptionThe Woodward 5462-718 is a high-precision speed sensing module engineered for critical turbomachinery control applications. This module serves as a vital component in gas turbine, steam turbine, and large compressor control systems, providing the high-fidelity RPM feedback necessary for precise governor regulation and reliable overspeed protection. Built for demanding industrial environments, the 5462-718 ensures operational stability and helps prevent mechanical failure in power generation and refinery settings.Features
High-precision frequency signal conversion for rotational speed monitoring.
Optimized for integration with Woodward control platforms for real-time safety interlocking.
Rugged, encapsulated housing designed to withstand high-vibration environments, thermal stress, and industrial contaminants.
Designed for low-noise operation with high EMI resistance to maintain signal integrity over long cable runs.
Passive inductive design requiring no external power for the sensor element itself.
ApplicationsThis module is widely utilized in industrial control systems for:
Gas and steam turbine speed control.
Large-scale compressor sets.
Power plant generation monitoring.
Industrial overspeed protection systems.
Technical Specifications
Model
5462-718
Brand
Woodward
Component Type
Speed Sensor Module
Input Signal
Magnetic pulse / Frequency
Power Consumption
Passive (Inductive)
Operating Temperature
-40 to 105 deg C
Mounting Type
Threaded probe / Bracket
Installation Guidelines
Ensure the sensor is mounted securely to minimize mechanical runout and vibration-induced signal noise.
Use shielded cabling for signal transmission to maintain high EMI immunity in industrial environments.
Verify that the air gap between the sensor tip and the target gear is within the manufacturer's specified tolerance for optimal signal amplitude.
Handle with care to avoid damage to the sensing tip; ensure the mounting bracket is rigid to prevent misalignment during thermal expansion.
Always isolate the control system power before performing maintenance or wiring adjustments on the sensor interface.
FAQWhat is the primary function of the Woodward 5462-718?The 5462-718 is a speed sensor module that converts rotational movement into a frequency signal, which is then used by Woodward control systems for speed monitoring and overspeed protection.Is this module compatible with all Woodward controllers?The 5462-718 is designed for specific Woodward control platforms. Please verify your system's technical documentation or the specific controller's compatibility list to ensure the module meets your application requirements.Does this sensor require external power?No, the 5462-718 is a passive inductive device that generates its own signal based on the passing of gear teeth or magnetic targets.
6 in stock
Delivery within 48 hours, pay afterwards
Mid weeks Monday to friday we offer next day delivery if the product is on stock and exceptions on holidays.
Weekends We offer no deliveries in the weekends.
International Depending on where you’re located, we offer next day delivery. Check your status on this link
2 in stock
Delivery within 48 hours, pay afterwards
Mid weeks Monday to friday we offer next day delivery if the product is on stock and exceptions on holidays.
Weekends We offer no deliveries in the weekends.
International Depending on where you’re located, we offer next day delivery. Check your status on this link
DescriptionThe Emerson Control Techniques FX-490 is a high-performance digital servo drive designed for precision motion control applications. Engineered for reliability and dynamic response, this drive is optimized for controlling brushless AC synchronous motors. It employs advanced sinusoidal PWM algorithms to deliver smooth torque and precise velocity control, making it a standard choice for demanding industrial automation tasks such as high-speed packaging, textile machinery, and multi-axis synchronization.Features
High Dynamic Response: Advanced PWM control ensures rapid acceleration and precise positioning.
Integrated Feedback: Native support for resolver inputs for reliable closed-loop position and velocity feedback.
Energy Management: Built-in regeneration circuitry manages back-EMF during deceleration, protecting the DC bus and improving energy efficiency.
System Protection: Includes comprehensive thermal monitoring and internal fault diagnostics to prevent system damage and minimize downtime.
Flexible Integration: Designed for seamless connectivity within PLC-based control architectures via dedicated I/O and expansion options.
ApplicationsThe FX-490 is widely utilized in industrial sectors requiring high-speed, high-precision motion, including:
Automated manufacturing and assembly lines.
Textile machinery requiring millisecond-level synchronization.
High-speed packaging and labeling equipment.
Material handling and robotic positioning systems.
Technical Specifications
Brand
Emerson / Control Techniques
Model
FX-490
Input Voltage
230 VAC (Single or Three Phase)
Continuous Output Current
9.0 A
Peak Output Current
18.0 A
Feedback Type
Resolver
Control Method
Sinusoidal PWM
Operating Temperature
0 to 50 deg C
Storage Temperature
-40 to 70 deg C
Relative Humidity
5 to 95 percent (non-condensing)
Installation Guidelines
Environment: Ensure the drive is installed in a clean, dry, and well-ventilated enclosure to maintain operating temperatures within the specified 0 to 50 deg C range.
Grounding: Proper grounding of the drive chassis and motor cable shielding is essential to minimize EMI and ensure signal integrity.
Wiring: Use shielded cables for resolver feedback and motor power connections. Keep power and signal cables separated to prevent crosstalk.
Safety: Always disconnect all power sources and wait for the DC bus capacitors to discharge before performing any maintenance, wiring, or module removal.
Handling: This unit contains sensitive electronic components. Use standard ESD precautions during installation and handling.
FAQWhat type of motor is the FX-490 designed to drive?The FX-490 is specifically engineered for brushless AC synchronous motors, utilizing resolver feedback for closed-loop control.Does the drive support regeneration?Yes, the unit features built-in regeneration circuitry to manage back-EMF generated during motor deceleration, which helps protect internal DC bus components.Can this drive be used in a 24/7 production environment?Yes, the FX-490 is designed for continuous industrial operation, featuring integrated thermal protection and diagnostic routines to ensure maximum uptime.
2 in stock
Delivery within 48 hours, pay afterwards
Mid weeks Monday to friday we offer next day delivery if the product is on stock and exceptions on holidays.
Weekends We offer no deliveries in the weekends.
International Depending on where you’re located, we offer next day delivery. Check your status on this link
5 in stock
Delivery within 48 hours, pay afterwards
Mid weeks Monday to friday we offer next day delivery if the product is on stock and exceptions on holidays.
Weekends We offer no deliveries in the weekends.
International Depending on where you’re located, we offer next day delivery. Check your status on this link
DescriptionThe Schneider Electric Altivar 61 ATV61HD15N4 is a high-performance variable speed drive designed for precise motor control in industrial applications. Engineered for reliability and efficiency, this drive is specifically optimized for pumping and ventilation systems, providing advanced control features and seamless integration into industrial automation networks.Features
Designed for 15 kW (20 HP) motor applications.
Supports 3-phase power supply ranging from 380V to 480V.
Integrated graphic terminal for intuitive configuration and monitoring.
IP20 protection rating suitable for cabinet-mounted installations.
Built-in EMC filtering to reduce electromagnetic interference in sensitive environments.
ApplicationsThis drive is ideal for HVAC systems, centrifugal pumps, fans, and compressors where energy efficiency and precise flow or pressure control are required.Technical Specifications
Model
ATV61HD15N4
Manufacturer
Schneider Electric
Product Range
Altivar 61
Power Rating
15 kW / 20 HP
Supply Voltage
380-480V AC (-15% to +10%)
Supply Phases
3-Phase
Enclosure Rating
IP20
Application
Pumping and Ventilation
Installation Guidelines
Ensure the drive is installed in a clean, dry, and well-ventilated environment to prevent overheating.
Maintain adequate clearance around the unit as specified in the installation manual to allow for proper airflow.
Ensure all power connections are tightened to the specified torque settings to prevent arcing or loose contacts.
Verify that the supply voltage matches the drive specifications before applying power.
Always disconnect and lock out power sources before performing any wiring or maintenance.
Use shielded cables for motor connections to minimize electromagnetic interference.
Ground the drive according to local electrical codes and the manufacturer's grounding diagram.
FAQIs this drive suitable for heavy-duty industrial motors?The ATV61HD15N4 is specifically optimized for pumping and ventilation applications. For high-torque or heavy-duty industrial machinery, please consult the product datasheet to ensure the drive's current rating matches your motor's full-load amperage.Does this unit include a control interface?Yes, this model comes equipped with a graphic terminal, allowing for easy parameter adjustment, diagnostics, and real-time status monitoring.
5 in stock
Delivery within 48 hours, pay afterwards
Mid weeks Monday to friday we offer next day delivery if the product is on stock and exceptions on holidays.
Weekends We offer no deliveries in the weekends.
International Depending on where you’re located, we offer next day delivery. Check your status on this link
1 in stock
Delivery within 48 hours, pay afterwards
Mid weeks Monday to friday we offer next day delivery if the product is on stock and exceptions on holidays.
Weekends We offer no deliveries in the weekends.
International Depending on where you’re located, we offer next day delivery. Check your status on this link
DescriptionThe GE Fanuc IC693APU300H is a high-speed counter (HSC) module designed for the Series 90-30 Programmable Logic Controller (PLC) system. This module is engineered to handle high-frequency pulse inputs, providing precise counting and timing capabilities required for industrial motion control, flow metering, and high-speed production line monitoring.Features
Twelve (12) positive logic input channels for versatile signal acquisition.
Four (4) positive logic output channels for control and signaling.
Supports a wide input signal voltage range from 5 VDC to 30 VDC.
High-speed counting performance with rates up to 200 kHz.
Integrated LED indicators for Board OK and Configuration OK status monitoring.
Galvanic isolation rated at 250 Volts AC for enhanced system protection.
Powered directly from the PLC backplane at 5 VDC.
ApplicationsThis module is typically utilized in industrial automation environments requiring high-speed pulse processing, such as:
Rotary encoder interfacing for position control.
High-speed turbine or flow meter pulse counting.
Batch counting and conveyor speed monitoring.
Synchronization of high-speed manufacturing processes.
Technical Specifications
Model
IC693APU300H
Manufacturer
General Electric (GE Fanuc)
Series
Series 90-30
Input Channels
12 (Positive Logic)
Output Channels
4 (Positive Logic)
Max Count Rate
Up to 200 kHz
Input Voltage
5 VDC, 10-30 VDC
Output Voltage Range
10-30 VDC (at 500 mA) / 4.75-6 VDC (at 20 mA)
Backplane Power
250 mA at 5 VDC
Isolation
250 Volts AC
Installation Guidelines
Ensure the PLC system is powered down before inserting or removing the module from the rack.
Install the module in an appropriate Series 90-30 I/O slot, ensuring the backplane connector is fully seated and the module is secured with the provided mounting screws.
Use shielded cabling for high-speed pulse inputs to minimize electromagnetic interference (EMI).
Maintain proper grounding practices for the PLC chassis to ensure signal integrity and safety.
Ensure the operating environment is within the specified temperature ranges and free from excessive dust or corrosive gases.
FAQWhat is the primary function of the IC693APU300H?The IC693APU300H is a specialized I/O module for the GE Series 90-30 PLC that counts high-frequency pulses from external devices like encoders or sensors and provides high-speed output control based on those counts.Is this module compatible with all Series 90-30 racks?Yes, this module is designed for standard Series 90-30 PLC backplanes. Please ensure your specific CPU and rack configuration support the power requirements of this module.
1 in stock
Delivery within 48 hours, pay afterwards
Mid weeks Monday to friday we offer next day delivery if the product is on stock and exceptions on holidays.
Weekends We offer no deliveries in the weekends.
International Depending on where you’re located, we offer next day delivery. Check your status on this link
8 in stock
Delivery within 48 hours, pay afterwards
Mid weeks Monday to friday we offer next day delivery if the product is on stock and exceptions on holidays.
Weekends We offer no deliveries in the weekends.
International Depending on where you’re located, we offer next day delivery. Check your status on this link
The Allen-Bradley 1336F-BRF75-AA-EN is a member of the 1336 PLUS II series of adjustable frequency AC drives. Designed for precise motor control in industrial environments, this unit provides reliable performance for a wide range of variable speed applications. Please note that this product has been discontinued by the manufacturer.Features
Adjustable frequency control for optimized motor performance
Input voltage range: 380-480V AC or 513-620V DC
Power rating: 5.5 kW / 7.5 HP
Enclosure rating: IP20 / NEMA 1
Frame size: A4
Technical Specifications
Manufacturer
Allen-Bradley
Series
1336 PLUS II
Model Number
1336F-BRF75-AA-EN
Power Rating
5.5 kW / 7.5 HP
Input Voltage
380-480V AC / 513-620V DC
Enclosure Type
IP20 / NEMA 1
Frame Size
A4
Installation Guidelines
Ensure the drive is mounted in a vertical position to allow for proper heat dissipation.
Maintain adequate clearance around the unit for airflow; refer to the user manual for specific spacing requirements.
Verify that the input power supply matches the voltage specifications of the drive before connection.
Ensure all wiring is properly shielded and grounded to minimize electromagnetic interference (EMI).
Always disconnect and lock out power before performing any installation, wiring, or maintenance tasks.
Handle the unit with care to avoid damage to internal components; use ESD-safe practices when handling the drive electronics.
FAQIs the 1336F-BRF75-AA-EN still in production? No, this model has been discontinued by Allen-Bradley. We provide refurbished or surplus units to support legacy systems.What is the enclosure rating for this drive? This unit features an IP20 / NEMA 1 enclosure, suitable for indoor use in controlled environments.
8 in stock
Delivery within 48 hours, pay afterwards
Mid weeks Monday to friday we offer next day delivery if the product is on stock and exceptions on holidays.
Weekends We offer no deliveries in the weekends.
International Depending on where you’re located, we offer next day delivery. Check your status on this link
7 in stock
Delivery within 48 hours, pay afterwards
Mid weeks Monday to friday we offer next day delivery if the product is on stock and exceptions on holidays.
Weekends We offer no deliveries in the weekends.
International Depending on where you’re located, we offer next day delivery. Check your status on this link
The Allen-Bradley 1756-M02AS is a ControlLogix Integrated Motion module designed to provide high-performance motion control for industrial automation applications. This module supports two axes per module and is compatible with the ControlLogix platform, allowing for up to 32 axes per controller.Features
Supports 2 axes per module.
Integrated motion control with 32-bit floating-point gain resolution.
Analog voltage servo output with a range of +/- 10V DC.
16-bit analog output resolution for precise control.
Includes solid-state isolated relay contacts for discrete outputs.
Discrete output operating voltage: 24V DC nominal.
ApplicationsThis module is typically used in complex motion control systems requiring high-speed, synchronized axis management, such as packaging machinery, material handling, and precision assembly lines within the ControlLogix architecture.Technical Specifications
Product Model
1756-M02AS
Axes per Module
2
Axes per Controller
32
Servo Output Type
Analog Voltage
Voltage Range
+/- 10V DC
Analog Output Resolution
16 bits
Gain Resolution
32-bit floating point
Backplane Current (5V)
700 mA
Backplane Current (24V)
2.5 mA
Installation Guidelines
Ensure the ControlLogix chassis is powered down before inserting or removing the module.
The module is designed for standard ControlLogix backplane mounting.
Use shielded cables for analog signal connections to minimize electromagnetic interference (EMI).
Ensure proper grounding of the chassis to a common earth ground to maintain signal integrity.
Maintain adequate clearance around the module to ensure proper airflow and cooling within the cabinet.
FAQWhat is the primary function of the 1756-M02AS?It is a motion control module that interfaces with servo drives using analog voltage signals to control axis movement within a ControlLogix system.How many axes can this module control?The 1756-M02AS supports 2 axes per module.
7 in stock
Delivery within 48 hours, pay afterwards
Mid weeks Monday to friday we offer next day delivery if the product is on stock and exceptions on holidays.
Weekends We offer no deliveries in the weekends.
International Depending on where you’re located, we offer next day delivery. Check your status on this link
4 in stock
Delivery within 48 hours, pay afterwards
Mid weeks Monday to friday we offer next day delivery if the product is on stock and exceptions on holidays.
Weekends We offer no deliveries in the weekends.
International Depending on where you’re located, we offer next day delivery. Check your status on this link
DescriptionThe ZAE 201 is a high-speed counter module designed for the legacy AEG Schneider Electric Modicon A120 automation platform. This module is engineered to process high-frequency pulse trains, rotary encoder signals, and flow meter inputs that exceed the scanning capabilities of standard digital I/O modules. By performing high-speed count accumulation and hardware gating locally, the ZAE 201 offloads the central CPU, reduces calculation jitter, and ensures system bus integrity through robust optocoupler isolation.Features
Dual independent high-speed counting channels supporting up to 50 kHz frequency.
Supports single-phase counting and dual-phase quadrature decoding (A/B phases) with Z-pulse marker capability.
Integrated auxiliary discrete inputs for remote gate control (start/stop) and hardware reset triggers.
Onboard diagnostic LED panel providing real-time status for bus communication (RUN), internal hardware health (ERR), and individual channel activity.
Galvanic isolation between field terminals and internal logic to protect against electrical noise and surges.
ApplicationsThe ZAE 201 is suitable for specialized positioning and velocity tracking loops in demanding industrial environments, including:
Mineral processing and mining operations.
Turbine monitoring and control in power generation plants.
Fluid metering and flow control systems in petroleum refining.
Precision motion control and rotary encoder integration.
Technical Specifications
Model
ZAE 201
Channels
2 Independent
Max Frequency
50 kHz
Resolution
16-bit binary (expandable to 24-bit)
Input Voltage
24 V DC (19.2 to 30 V DC range)
Input Logic
Sink (Positive Logic)
Current Consumption
150 mA at 5 V DC
Power Consumption
5.5 W max
Operating Temp
0 to 60 deg C
Protection
IP20
Installation Guidelines
Ensure the Modicon A120 rack is powered down before inserting or removing the module to prevent electrical damage or bus errors.
Mount the module in a clean, dry environment within the specified temperature range to ensure long-term reliability.
Use shielded twisted-pair cabling for high-speed encoder and pulse signals to minimize EMI interference.
Maintain proper grounding practices for the rack assembly to ensure the effectiveness of the galvanic isolation.
Verify that input signal levels comply with the 24 V DC nominal requirements; ensure signal state 1 is above 15 V DC and state 0 is below 5 V DC.
FAQIs the ZAE 201 compatible with modern Modicon platforms?The ZAE 201 is specifically designed for the legacy Modicon A120 series. It is not natively compatible with newer Modicon M340 or M580 platforms without specialized gateway hardware.Does this module require external power for the inputs?Yes, the field inputs require a nominal 24 V DC supply within the 19.2 to 30 V DC range to function correctly as per the sink logic configuration.
4 in stock
Delivery within 48 hours, pay afterwards
Mid weeks Monday to friday we offer next day delivery if the product is on stock and exceptions on holidays.
Weekends We offer no deliveries in the weekends.
International Depending on where you’re located, we offer next day delivery. Check your status on this link
6 in stock
Delivery within 48 hours, pay afterwards
Mid weeks Monday to friday we offer next day delivery if the product is on stock and exceptions on holidays.
Weekends We offer no deliveries in the weekends.
International Depending on where you’re located, we offer next day delivery. Check your status on this link
DescriptionThe Schneider Electric ATV61HD22N4Z is a high-performance variable speed drive from the Altivar 61 series, engineered for precise motor control in industrial pumping and ventilation applications. Designed for 22 kW (30 HP) motors, this drive operates on a 3-phase 380-480V supply, providing robust speed regulation and energy efficiency for demanding HVAC and fluid management systems.Features
Optimized for pumping and ventilation machine control.
Supports 22 kW (30 HP) motor power ratings.
Integrated EMC filter for electromagnetic compatibility.
IP20 ingress protection rating for cabinet mounting.
Reliable operation within 380-480V 3-phase power networks.
ApplicationsThis drive is specifically designed for industrial processes requiring variable speed control, including centrifugal pumps, fans, compressors, and HVAC ventilation systems. Its control algorithms are tuned to enhance the efficiency of fluid and air handling equipment.Technical Specifications
Product Model
ATV61HD22N4Z
Range of Product
Altivar 61
Motor Power (kW)
22 kW
Motor Power (HP)
30 HP
Supply Voltage
380...480V (-15% to +10%)
Phases
3-phase
Ingress Protection
IP20
Application
Pumping and Ventilation
Installation Guidelines
Ensure the drive is mounted vertically in a clean, dry, and well-ventilated enclosure to maintain the IP20 rating.
Maintain adequate clearance around the unit for heat dissipation as specified in the installation manual.
Use shielded cables for motor connections to minimize EMI and ensure proper grounding of the drive chassis.
Verify that the incoming power supply voltage matches the drive's input range (380-480V) before energizing.
Always disconnect power and wait for the DC bus capacitors to discharge before performing any wiring or maintenance.
FAQIs the graphic terminal included with this model?No, the ATV61HD22N4Z is supplied without the graphic display terminal.What is the primary application for this drive?This unit is specifically optimized for pumping and ventilation machine applications, offering specialized control features for these types of loads.
6 in stock
Delivery within 48 hours, pay afterwards
Mid weeks Monday to friday we offer next day delivery if the product is on stock and exceptions on holidays.
Weekends We offer no deliveries in the weekends.
International Depending on where you’re located, we offer next day delivery. Check your status on this link
