تُقدّم ألين-برادلي، التابعة لشركة روكويل أوتوميشن، مجموعةً واسعةً من منتجات الأتمتة الصناعية. بدءًا من وحدات التحكم المنطقية القابلة للبرمجة (PLCs) ولوحات واجهة الإنسان والآلة (HMIs)، وصولًا إلى وحدات ووحدات التحكم في الإدخال/الإخراج (I/O)، تضمن حلول ألين-برادلي تحكمًا صناعيًا موثوقًا وفعالًا وقابلًا للتطوير في المصانع حول العالم.
نحن نقدم خدمة التوصيل في اليوم التالي من الاثنين إلى الجمعة إذا كان المنتج موجودًا في المخزون والاستثناءات في أيام العطلات.
عطلات نهاية الأسبوع
نحن لا نقدم أي تسليمات في عطلة نهاية الأسبوع.
دولي
نوفر خدمة التوصيل في اليوم التالي، حسب موقعك. تحقق من حالة طلبك عبر هذا الرابط.
DescriptionThe Allen-Bradley SP-110996 (also referenced as SP-105060) is an Armature Pulse Printed Circuit Board (PCB) designed for use within the 1395 DC Drive series. This component is a critical spare part for maintaining the control and feedback loops of the drive system. Please note that this item has been discontinued by the manufacturer, making it a specialized component for legacy system maintenance and repair.Features
Compatible with Allen-Bradley 1395 Series DC Drives
Function: Armature Pulse control and signal processing
Direct replacement for legacy drive hardware
Engineered for industrial control environments
Technical Specifications
Product Model
SP-110996 / SP-105060
Spare Model Reference
105066-02
Component Type
Armature Pulse PC Board
Manufacturer
Allen-Bradley
Weight
0.16 kg
Installation Guidelines
Ensure all power to the 1395 drive is completely disconnected and locked out before attempting to access or replace the PCB.
Use proper Electrostatic Discharge (ESD) protection, such as a grounded wrist strap, when handling the circuit board to prevent damage to sensitive components.
Carefully align the board with the designated slot or mounting points; do not force the connection.
Verify that all cable connections are secure and properly seated before restoring power to the unit.
Inspect the drive chassis for any signs of debris or moisture that could affect the performance of the new board.
FAQIs this board compatible with drives other than the 1395 series?This board is specifically designed for the Allen-Bradley 1395 DC Drive series. It is not intended for use in other drive families unless explicitly specified by technical documentation.What should I do if my drive displays an error after installation?First, verify that the board is fully seated and all connections are tight. If the error persists, check for secondary faults in the drive system or consult the 1395 series technical manual for specific diagnostic codes related to the armature pulse circuit.
نحن نقدم خدمة التوصيل في اليوم التالي من الاثنين إلى الجمعة إذا كان المنتج موجودًا في المخزون والاستثناءات في أيام العطلات.
عطلات نهاية الأسبوع
نحن لا نقدم أي تسليمات في عطلة نهاية الأسبوع.
دولي
نوفر خدمة التوصيل في اليوم التالي، حسب موقعك. تحقق من حالة طلبك عبر هذا الرابط.
DescriptionThe ABB ICSC08L1 is a remote I/O unit designed for the Procontic CS31 automation system. This module facilitates distributed input and output operations, allowing for efficient signal processing in industrial control environments. Although this unit is now discontinued by the manufacturer, it remains a critical component for maintaining legacy Procontic CS31 installations.Features
Designed for integration within the ABB Procontic CS31 fieldbus architecture.
Supports 24 Vdc operation for reliable I/O signal handling.
Compact hardware footprint suitable for space-constrained control cabinets.
Compatible with legacy ABB automation infrastructure.
Technical Specifications
Model
ICSC08L1
Spare Model / Order Code
FPR3319101R1082
System Series
Procontic CS31
Supply Voltage
24 Vdc
Manufacturer
ABB
Weight
0.28 kg
Tariff Code
8538907080
Installation Guidelines
Ensure the control system power is fully disconnected before installing or removing the I/O unit to prevent electrical damage.
Mount the unit in a clean, dry environment, ensuring adequate ventilation to prevent overheating.
Verify that all wiring connections are secure and follow local electrical codes for industrial control equipment.
Use shielded cabling where necessary to minimize electromagnetic interference (EMI) in high-noise industrial environments.
Handle the module using proper ESD (Electrostatic Discharge) precautions to protect internal circuitry.
FAQIs the ICSC08L1 still in production? No, this unit has been discontinued by ABB. It is primarily available through secondary market channels or as a refurbished spare.What is the primary function of this module? The ICSC08L1 acts as a remote I/O interface for the Procontic CS31 system, enabling the controller to communicate with field devices located away from the main processor.Can I use this as a direct replacement for other CS31 modules? You should verify the specific part number and system configuration requirements. The spare model number associated with this unit is FPR3319101R1082.
نحن نقدم خدمة التوصيل في اليوم التالي من الاثنين إلى الجمعة إذا كان المنتج موجودًا في المخزون والاستثناءات في أيام العطلات.
عطلات نهاية الأسبوع
نحن لا نقدم أي تسليمات في عطلة نهاية الأسبوع.
دولي
نوفر خدمة التوصيل في اليوم التالي، حسب موقعك. تحقق من حالة طلبك عبر هذا الرابط.
The Allen-Bradley 1756-DICAM is a specialized digital cam switch module designed for the ControlLogix automation platform. By utilizing an onboard Motorola ColdFire CPU, this single-slot module offloads complex position-proportional logic from the primary controller, executing high-speed cam scheduling directly at the hardware layer. This autonomous operation optimizes execution rates for rotational position sensing and sequential tool triggering, reducing system latency and mechanical downtime in high-speed applications such as packaging, rotary assembly, and bottling.Features
Co-Processing Architecture: Executes high-speed cam logic independently to minimize controller scan time impact.
High-Capacity Profiles: Supports up to 10,000 programmable cam steps for complex, non-linear mechanical profiles.
High-Density I/O: Features 8 field inputs and 24 sourcing (positive-switching) digital outputs.
Flexible Output Current: Outputs support 200 mA or 400 mA per point, depending on wiring and load requirements.
Dynamic Configuration: Enables rapid recipe hot-swaps without requiring firmware resets.
ApplicationsThe 1756-DICAM is ideal for high-speed industrial machinery requiring precise, sub-millisecond switching behaviors. Common applications include:
Rotary packaging and bottling lines
High-speed material handling systems
Automated assembly and stamping machinery
Dynamic tool triggering based on rotational position
Technical Specifications
Model
1756-DICAM
Processor
Motorola ColdFire CPU
Inputs
8
Outputs
24 Sourcing (Positive-Switching)
Field Voltage
24 VDC Nominal
Output Current
200 mA or 400 mA per point
Storage Capacity
10,000 Cam Steps
Operating Temperature
0 to 55 deg C
Relative Humidity
5 to 95 percent (non-condensing)
Chassis Slot Width
1 Slot
Installation Guidelines
ESD Precautions: Always use a grounded wrist strap when handling the module to prevent electrostatic discharge damage to internal circuitry.
Power Down: Ensure the ControlLogix chassis is powered down before inserting or removing the module.
Mounting: The module is designed for installation in any standard 1756 ControlLogix chassis. Ensure the module is fully seated and the top/bottom retaining latches are locked.
Wiring: Use shielded cables for field I/O to minimize EMI interference. Ensure proper grounding of the chassis backplane.
Environment: Maintain the module within the specified 0 to 55 deg C operating temperature range and ensure adequate ventilation within the enclosure.
FAQWhat is the primary function of the 1756-DICAM?The 1756-DICAM acts as a high-speed co-processor for the ControlLogix system, specifically designed to handle digital cam switch functions, position sensing, and rapid output triggering independent of the main PLC scan cycle.Can this module be used in any ControlLogix chassis?Yes, the 1756-DICAM is a standard single-slot module compatible with all standard 1756 ControlLogix chassis series.What type of outputs does the module provide?The module provides 24 sourcing (positive-switching) 24 VDC outputs, capable of handling either 200 mA or 400 mA per point depending on the specific application wiring.
نحن نقدم خدمة التوصيل في اليوم التالي من الاثنين إلى الجمعة إذا كان المنتج موجودًا في المخزون والاستثناءات في أيام العطلات.
عطلات نهاية الأسبوع
نحن لا نقدم أي تسليمات في عطلة نهاية الأسبوع.
دولي
نوفر خدمة التوصيل في اليوم التالي، حسب موقعك. تحقق من حالة طلبك عبر هذا الرابط.
The 2711P-B12C6A2 is a robust industrial operator interface terminal from the Allen-Bradley PanelView Plus 1250 series. This HMI is engineered for demanding environments, providing real-time data visualization, system monitoring, and machine control by interfacing directly with industrial automation controllers. It is suitable for diverse applications, including petrochemical processing, power generation, automotive manufacturing, and municipal water management, offering clear process mimic visualization and stable control loop monitoring.Features
Dual-input interface featuring an analog resistive touchscreen and 40 programmable function keys (F1–F20, K1–K20, numeric, and navigation) rated for 1 million actuations.
Integrated multi-protocol communication engine supporting Ethernet, Data Highway Plus (DH+), Remote I/O (RIO), DH-485, and RS-232.
Robust memory architecture with 128 MB RAM and 128 MB non-volatile Flash storage for application files and historical data.
Compact Flash expansion slot for local memory expansion and system configuration backups.
USB peripheral ports for connecting external keyboards, mice, or mass storage devices.
ApplicationsThis terminal is designed for integration into complex automation architectures where reliable operator feedback and control are critical. It is widely used in heavy industry for monitoring PLC-based processes, managing alarm logs, and providing a centralized point for machine interaction in distributed control systems.Technical Specifications
Model
2711P-B12C6A2
Display Size
12.1 inches
Display Type
Color active matrix TFT LCD
Resolution
800 x 600 pixels
Backlight Life
50,000 hours (CCFL)
Input Voltage
85 to 264 VAC
Frequency
47 to 63 Hz
Power Consumption
160 VA max
Operating Temp
0 to 55 deg C
Storage Temp
-25 to 70 deg C
Memory
128 MB RAM / 128 MB Flash
Installation Guidelines
Ensure adequate ventilation around the unit to maintain operating temperatures within the 0 to 55 deg C range.
Mount the terminal in a suitable NEMA/IP-rated enclosure to protect against environmental contaminants.
Verify that the AC power supply is within the specified 85–264 VAC range before applying power.
Use shielded communication cables for Ethernet and serial connections to minimize EMI interference in industrial environments.
Always power down the system before inserting or removing Compact Flash cards or peripheral USB devices.
Ensure a solid chassis ground connection to the panel to prevent electrical noise and ensure operator safety.
FAQIs this unit still in production?No, the 2711P-B12C6A2 is currently classified as a discontinued or obsolete product by the manufacturer. We provide these units as refurbished or surplus spare parts to support legacy system maintenance.What communication protocols are supported?The unit supports a wide range of legacy and standard protocols including Ethernet, Data Highway Plus (DH+), Remote I/O (RIO), DH-485, and RS-232, making it highly versatile for retrofitting older control systems.
نحن نقدم خدمة التوصيل في اليوم التالي من الاثنين إلى الجمعة إذا كان المنتج موجودًا في المخزون والاستثناءات في أيام العطلات.
عطلات نهاية الأسبوع
نحن لا نقدم أي تسليمات في عطلة نهاية الأسبوع.
دولي
نوفر خدمة التوصيل في اليوم التالي، حسب موقعك. تحقق من حالة طلبك عبر هذا الرابط.
DescriptionThe Siemens 6ES5 330-7AB11 is a hardware-based diagnostic test module designed for the legacy Simatic S5-110 series programmable logic controller systems. This unit provides real-time visual status monitoring of rack internal buses, signal conditioning lines, and central processing unit states. By capturing logic transitions and fault conditions directly from the backplane, it enables field technicians to isolate timing anomalies, power fluctuations, and communication breaks efficiently.Features
Direct backplane monitoring for Simatic S5-110 series racks.
Integrated multi-segment LED indicators for immediate visual fault mapping.
Passive data listening architecture prevents capacitive loading on system buses.
High-speed optocoupler isolation protects internal diagnostic circuits from electrical surges.
Plug-and-play operation; requires no software configuration or specialized drivers.
Ruggedized faceplate design resistant to industrial vibrations.
ApplicationsThis module is typically deployed in legacy industrial environments where continuous operation is critical, such as petrochemical refining, thermal power generation, and deep-shaft mining infrastructure. It is an essential tool for reducing mean time to repair (MTTR) and preventing unnecessary component replacement during system troubleshooting.Technical Specifications
Model
6ES5 330-7AB11
System Compatibility
Simatic S5-110 Series
Display Interface
Multi-Segment LED Status Indicators
Power Consumption
1.5 W typical (sourced via backplane)
Operating Temperature
0 to 55 deg C
Storage Temperature
-40 to 70 deg C
Relative Humidity
95 percent non-condensing
Installation Guidelines
Ensure the PLC rack power is disconnected before inserting or removing the module.
Verify the module is correctly seated in the designated S5 chassis slot to ensure proper backplane contact.
Handle the module using standard ESD (Electrostatic Discharge) precautions to protect internal circuitry.
Ensure the installation environment remains within the specified temperature and humidity ranges to prevent premature component failure.
Keep the module clear of high-EMI (Electromagnetic Interference) sources to ensure accurate LED status reporting.
FAQDoes this module require software configuration?No, the 6ES5 330-7AB11 operates as a passive listener and does not require software setup, programming, or diagnostic drivers.Is this module compatible with other S5 series racks?This module is specifically engineered for the Simatic S5-110 series bus architecture. Please verify your specific rack model before installation.How is the module powered?The module draws its operating power directly from the S5 backplane, requiring no external power supply wiring.
نحن نقدم خدمة التوصيل في اليوم التالي من الاثنين إلى الجمعة إذا كان المنتج موجودًا في المخزون والاستثناءات في أيام العطلات.
عطلات نهاية الأسبوع
نحن لا نقدم أي تسليمات في عطلة نهاية الأسبوع.
دولي
نوفر خدمة التوصيل في اليوم التالي، حسب موقعك. تحقق من حالة طلبك عبر هذا الرابط.
The Allen-Bradley 1764-24BWA is a base unit controller from the MicroLogix 1500 series, designed to provide reliable control for small-to-medium industrial automation applications. This base unit features a compact footprint and integrates both digital inputs and relay outputs to interface with a variety of field devices.Features
Integrated 120/240V AC power supply for standalone operation.
12 x 24V DC sink/source digital inputs for flexible sensor interfacing.
12 x Relay outputs capable of handling 24-125V DC or 120-240V AC loads.
Compact modular design suitable for DIN-rail or panel mounting.
Supports high-speed input frequency up to 20 kHz.
Technical Specifications
Product Model
1764-24BWA
Manufacturer
Allen-Bradley
Module Type
Base Unit
Line Power
85 to 265V AC
Digital Inputs
12 x 24V DC (Sink/Source)
Digital Outputs
12 x Relay
Output Voltage Range
24-125V DC; 120-240V AC
Input Frequency
0 to 20 kHz
Installation Guidelines
Ensure the controller is installed in a clean, dry environment with adequate ventilation to prevent overheating.
Mount the unit on a standard DIN-rail or directly to a backplane using the provided mounting holes.
Always disconnect power before performing any wiring or module installation to prevent electrical shock or damage.
Ensure proper grounding of the chassis to minimize electromagnetic interference (EMI) and improve signal integrity.
Use shielded cables for input and output signals, keeping them separate from high-voltage power lines.
FAQQ: Does this unit require an external power supply for the inputs?A: The 1764-24BWA inputs are rated for 24V DC; you must provide a suitable 24V DC power source for the input devices.Q: Can this unit be expanded with additional I/O?A: Yes, the MicroLogix 1500 base units are designed to support expansion I/O modules to increase the total point count of the system.
The Allen-Bradley 2711-NM13 is a 2 MB PC flash memory card designed specifically for use with PanelView Standard operator terminals. This storage module facilitates the reliable transfer and retrieval of application files, configuration data, and runtime projects, ensuring consistent performance in industrial human-machine interface (HMI) applications.Features
2 MB storage capacity for PanelView Standard terminal applications.
Durable plastic housing engineered for industrial environments.
High vibration resistance (2 g up to 2000 Hz) for reliable operation in machinery-heavy settings.
Wide operating temperature range from 0 deg C to 55 deg C.
Supports non-condensing humidity environments up to 95%.
ApplicationsThis memory card is primarily used for loading, backing up, and restoring application files on PanelView Standard terminals. It is a critical component for maintenance, system updates, and project migration within automation control systems.Technical Specifications
Model
2711-NM13
Brand
Allen-Bradley
Product Type
PC Flash Memory Card
Memory Capacity
2 MB
Operating Temperature
0 deg C to 55 deg C
Storage Temperature
-20 deg C to 70 deg C
Humidity
5% to 95% (Non-condensing)
Vibration Resistance
2 g up to 2000 Hz
Max Altitude
2000 meters
Installation Guidelines
Ensure the PanelView terminal is powered down before inserting or removing the memory card to prevent data corruption or electrical damage.
Insert the card into the designated PCMCIA slot on the terminal, ensuring correct orientation.
Avoid exposure to excessive dust, moisture, or corrosive gases in the installation environment.
Handle the card by its edges to prevent electrostatic discharge (ESD) or physical damage to the contact pins.
Store in a clean, dry environment when not in use to maintain data integrity.
FAQIs the 2711-NM13 compatible with all PanelView terminals?This card is designed for use with PanelView Standard terminals. Please verify your specific terminal model's compatibility with 2 MB PC flash memory cards before installation.What is the maximum operating altitude for this card?The 2711-NM13 is rated for operation at altitudes up to 2000 meters above sea level.
نحن نقدم خدمة التوصيل في اليوم التالي من الاثنين إلى الجمعة إذا كان المنتج موجودًا في المخزون والاستثناءات في أيام العطلات.
عطلات نهاية الأسبوع
نحن لا نقدم أي تسليمات في عطلة نهاية الأسبوع.
دولي
نوفر خدمة التوصيل في اليوم التالي، حسب موقعك. تحقق من حالة طلبك عبر هذا الرابط.
The Allen-Bradley 1785-ENET is a specialized communication interface module designed to provide Ethernet/IP connectivity to PLC-5 programmable controllers. This module acts as a sidecar unit, mounting directly to the side of a PLC-5 processor to facilitate high-speed data exchange over standard Ethernet TCP/IP networks.Features
Provides Ethernet/IP communication capabilities for Enhanced PLC-5 processors.
Direct physical attachment to the left side of the PLC-5 processor via a 62-pin connector header.
Supports 10/100 Mbps data transmission speeds with auto-negotiation.
Equipped with an RJ45 Ethernet port for standard network integration.
Integrated status indicators (STAT, 100M, 10M) for real-time link and activity monitoring.
Supports dual-link capability when used with specific PLC-5 Ethernet-enabled controllers.
Applications
Automotive Production: High-speed coordination between multiple controllers in powertrain and paint lines.
Material Handling: Routing and tracking for baggage, cargo, and parcel distribution systems.
Water Treatment: SCADA communication link for municipal water and wastewater facilities.
Metals Production: Real-time control for metal forming and casting processes.
Food & Beverage: Monitoring of fermentation and brewing processes in large-scale facilities.
Technical Specifications
Model
1785-ENET
Communication Protocol
Ethernet TCP/IP
Interface
8-pin RJ45
Backplane Current
1.0 A @ 5V DC
Power Dissipation
5 W
Heat Dissipation
17.06 BTU/hr
Isolation Voltage
50V
Wiring Category
2 (on communication ports)
Temperature Code
T5
Installation Guidelines
Power Down: Ensure all power to the 1771 I/O chassis and the PLC-5 controller is disconnected before installation to prevent memory loss or processor faults.
ESD Handling: Use standard electrostatic discharge (ESD) precautions when handling the module to prevent damage to internal circuitry.
Connector Header: Snap the 62-pin connector header into the mating connector on the right side of the 1785-ENET module.
Mounting: Align the connector header with the mating port on the left side of the PLC-5 processor. Press firmly to seat the connection and secure the assembly using the provided mounting screws.
Compatibility: Verify the Series and Revision of your PLC-5 processor against the 1785-ENET compatibility matrix to ensure proper operation.
FAQsWhat is the 1785-ENET?The Allen-Bradley 1785-ENET is a sidecar module designed to provide Ethernet communication capabilities to Enhanced PLC-5 processors.What is the 1785-ENET connection type?The module mounts directly to the left side of a PLC-5 processor using a 62-pin header and provides an RJ45 connector for 10/100 Mbps Ethernet communication.What indicates a faulty 1785-ENET setup?The module status LED (STAT) will flash an error code 37 if the attached PLC-5 processor is not compatible with the module.Can I use two cards in one PLC?No, Rockwell Automation supports only one 1785-ENET card per processor. For dual-subnet requirements, consider using a processor with built-in Ethernet.
نحن نقدم خدمة التوصيل في اليوم التالي من الاثنين إلى الجمعة إذا كان المنتج موجودًا في المخزون والاستثناءات في أيام العطلات.
عطلات نهاية الأسبوع
نحن لا نقدم أي تسليمات في عطلة نهاية الأسبوع.
دولي
نوفر خدمة التوصيل في اليوم التالي، حسب موقعك. تحقق من حالة طلبك عبر هذا الرابط.
The Allen-Bradley 2711-B5A8L1 is a PanelView 550 operator terminal designed for reliable human-machine interface (HMI) applications. This DC-powered unit provides real-time process monitoring, alarm management, and operator control in demanding industrial environments such as chemical processing, oil and gas, and water treatment facilities.Features
Hybrid input interface featuring both an analog resistive touchscreen and a 10-key tactile function keypad (F1 to F10).
5.5-inch monochrome blue-mode LCD display with 256 x 128 pixel resolution.
Integrated Data Highway Plus (DH+) communication port for deterministic plant-floor networking.
Dedicated RS-232 serial port for local printer connectivity.
Long-life LED backlight rated for 100,000 hours of operation.
Dual-memory architecture with 170 KB for application runtime and 240 KB for nonvolatile storage.
ApplicationsThis terminal is suitable for industrial automation tasks requiring robust HMI functionality, including machine control, process visualization, and alarm annunciation in environments where high-vibration or harsh conditions necessitate physical keypad input options.Technical Specifications
Model
2711-B5A8L1
Input Voltage
24 VDC nominal (18-32 VDC range)
Display Size
5.5 inches
Resolution
256 x 128 pixels
Input Type
Keypad and Touchscreen
Communication
DH+ and RS-232
Operating Temperature
0 to 55 deg C
Memory
170 KB Runtime / 240 KB Nonvolatile
Installation Guidelines
Ensure the terminal is mounted in a panel cutout that meets the required clearance for the 152 x 221 x 106 mm chassis.
Use a NEMA-rated enclosure to maintain the integrity of the front-panel seal in washdown or dusty environments.
Verify that the 24 VDC power supply is within the 18 to 32 VDC range before connection to prevent damage.
Maintain proper grounding practices to protect the DH+ communication interface from electrical noise and EMI.
Power down the unit before connecting or disconnecting communication cables or peripheral devices.
FAQIs this unit still in production? No, the 2711-B5A8L1 is classified as a discontinued or obsolete product by the manufacturer.What is the primary communication protocol? This model utilizes the Data Highway Plus (DH+) protocol for high-speed deterministic networking.Can I use this in high-vibration areas? Yes, the inclusion of 10 mechanical function keys allows for reliable control operation even when touchscreen use is difficult due to vibration.
نحن نقدم خدمة التوصيل في اليوم التالي من الاثنين إلى الجمعة إذا كان المنتج موجودًا في المخزون والاستثناءات في أيام العطلات.
عطلات نهاية الأسبوع
نحن لا نقدم أي تسليمات في عطلة نهاية الأسبوع.
دولي
نوفر خدمة التوصيل في اليوم التالي، حسب موقعك. تحقق من حالة طلبك عبر هذا الرابط.
DescriptionThe 1756-M1 is a high-integrity volatile memory expansion board designed for the early-generation Allen-Bradley ControlLogix 5550 processing platform. This hardware component functions as a direct physical RAM extension, providing 512 Kilobytes of additional volatile memory for storing instruction logic, data arrays, and system trend profiles. It is engineered to support legacy manufacturing systems, including automotive assembly lines, chemical processing, and printing press configurations, by preventing memory overflow and extending the operational lifecycle of existing controller hardware.Features
Provides 512 KB of additional volatile memory capacity.
Designed specifically for integration with 1756-L1 series ControlLogix processors.
Compact daughterboard architecture for direct internal mounting.
Maintains system reliability in demanding industrial environments.
Supports legacy system maintenance without requiring full processor replacement.
ApplicationsThis memory expansion board is intended for use in legacy ControlLogix 5550 automation environments where additional memory is required for complex logic or large data sets. Typical applications include automotive assembly, material handling, and chemical processing facilities utilizing 1756-L1 series controllers.Technical Specifications
Model
1756-M1
Memory Capacity
512 Kilobytes
Compatibility
1756-L1, 1756-L1M1, 1756-L1M2, 1756-L1M3
Power Dissipation
6.2 Watts
Thermal Dissipation
21.2 BTU/hr
Backplane Current (5.1 VDC)
760 mA (1.2 A peak)
Backplane Current (24 VDC)
2.5 mA
Operating Temperature
0 to 60 deg C
Storage Temperature
-40 to 85 deg C
Relative Humidity
5 to 95 percent (non-condensing)
Operating Vibration
2 g at 10 to 500 Hz
Operating Shock
30 g
Installation Guidelines
Ensure the controller is powered down before attempting to install or remove the memory board.
This module is an open-style component; handle with care to avoid damage to internal circuitry.
Strict adherence to ESD (Electrostatic Discharge) protocols is required; use a grounded wrist strap during handling.
Mount the daughterboard securely onto the main circuit assembly of the host controller using a number 2 Phillips screwdriver.
Ensure only one memory expansion board is installed per individual processor module.
Verify that the host module is correctly seated in the ControlLogix chassis before applying power.
FAQIs this board compatible with modern ControlLogix processors?No, the 1756-M1 is specifically engineered for the early-generation 1756-L1 series ControlLogix 5550 processors and is not compatible with newer ControlLogix controller models.Can I install multiple 1756-M1 boards in one processor?No, the hardware architecture limits installation to exactly one memory expansion board per individual processor module.
نحن نقدم خدمة التوصيل في اليوم التالي من الاثنين إلى الجمعة إذا كان المنتج موجودًا في المخزون والاستثناءات في أيام العطلات.
عطلات نهاية الأسبوع
نحن لا نقدم أي تسليمات في عطلة نهاية الأسبوع.
دولي
نوفر خدمة التوصيل في اليوم التالي، حسب موقعك. تحقق من حالة طلبك عبر هذا الرابط.
DescriptionThe Allen-Bradley 2711-NM12 is a PCMCIA linear flash memory card engineered for program and data backup within industrial operator interface systems. Designed specifically for compatibility with PanelView series operator terminals, this 1 MByte memory module provides reliable data retention to support application management, configuration storage, and system recovery. It serves as a critical component for maintaining legacy PanelView automation networks.Features
Standard PCMCIA linear flash memory architecture.
1 MByte storage capacity for terminal programs and operational data.
Optimized for industrial HMI platforms and PanelView series terminals.
Robust construction for stable performance in industrial environments.
ApplicationsThis memory card is primarily used for backing up and restoring application files, configuration settings, and firmware data on legacy Allen-Bradley PanelView operator terminals. It is essential for field maintenance, system upgrades, and disaster recovery procedures where terminal data must be preserved or transferred.Technical Specifications
Model
2711-NM12
Brand
Allen-Bradley
Memory Type
PCMCIA Linear Flash
Storage Capacity
1 MByte
Compatibility
PanelView Series Operator Terminals
Lifecycle Status
Discontinued
Installation Guidelines
Ensure the PanelView terminal is powered down before inserting or removing the PCMCIA card to prevent data corruption or electrical damage.
Handle the card by its edges; avoid touching the gold-plated connector pins to prevent oxidation or ESD damage.
Insert the card into the designated PCMCIA slot on the PanelView terminal until it is firmly seated.
Verify that the terminal recognizes the memory card via the system configuration or file management menu after power-up.
Store in a clean, dry environment when not in use to maintain the integrity of the flash memory contacts.
FAQIs this card compatible with all PanelView terminals?The 2711-NM12 is designed for specific legacy PanelView models that feature a PCMCIA slot. Please verify your specific terminal's hardware manual to confirm support for 1 MByte linear flash cards.Can this card be used for long-term data storage?Yes, linear flash memory is non-volatile and designed for reliable data retention in industrial applications, making it suitable for storing critical backup files for extended periods.
نحن نقدم خدمة التوصيل في اليوم التالي من الاثنين إلى الجمعة إذا كان المنتج موجودًا في المخزون والاستثناءات في أيام العطلات.
عطلات نهاية الأسبوع
نحن لا نقدم أي تسليمات في عطلة نهاية الأسبوع.
دولي
نوفر خدمة التوصيل في اليوم التالي، حسب موقعك. تحقق من حالة طلبك عبر هذا الرابط.
DescriptionThe Allen-Bradley 2711-NM11 is a specialized memory card designed for use with the PanelView 1000 series HMI terminals. Providing 256 KB of storage capacity, this module utilizes PCMCIA flash technology to ensure reliable backup and retrieval of critical HMI application files and program data. It is engineered to maintain system continuity and data integrity within industrial environments.Features
256 KB memory capacity for HMI program and application data storage.
PCMCIA flash technology for robust, non-volatile data retention.
Write-protected memory architecture to prevent accidental data modification.
Designed for high-reliability operation in industrial settings.
Integrated ESD protection up to 15 KV.
ApplicationsThis memory card is primarily used for the storage and transfer of operator interface configurations, screen files, and application data in PanelView 1000 series terminals. It serves as a vital tool for system backups, field updates, and maintaining operational consistency across human-machine interface installations.Technical Specifications
Model
2711-NM11
Brand
Allen-Bradley
Product Type
Memory Card
Product Line
PanelView 1000
Memory Capacity
256 KB
Memory Technology
PCMCIA Flash
ESD Protection
Up to 15 KV
Weight
0.06 kg
Installation Guidelines
Ensure the PanelView terminal is powered down or in the appropriate state before inserting or removing the memory card.
Align the card with the PCMCIA slot on the PanelView unit and slide it in until it is securely seated.
Use the integrated retainer or slot cover to ensure the card remains in place during operation and to protect the connector from dust and debris.
Handle the card by its edges to avoid touching the gold-plated contacts.
Observe standard ESD precautions when handling the module to prevent damage to internal circuitry.
FAQIs the 2711-NM11 compatible with other PanelView series?This memory card is specifically designed for the PanelView 1000 series. Compatibility with other PanelView models should be verified against the specific hardware manual for those units.Does the card require external power?No, the card is powered directly through the PCMCIA slot of the PanelView terminal.Can data be overwritten on this card?The card features write-protection capabilities to prevent unintentional changes; however, it can be updated or overwritten when the write-protection settings are managed through the HMI software or terminal configuration.
نحن نقدم خدمة التوصيل في اليوم التالي من الاثنين إلى الجمعة إذا كان المنتج موجودًا في المخزون والاستثناءات في أيام العطلات.
عطلات نهاية الأسبوع
نحن لا نقدم أي تسليمات في عطلة نهاية الأسبوع.
دولي
نوفر خدمة التوصيل في اليوم التالي، حسب موقعك. تحقق من حالة طلبك عبر هذا الرابط.
DescriptionThe ABB ICSI08E1-230 is a binary input unit designed for the Procontic CS31 automation system. This module facilitates the reliable acquisition of digital signals within industrial control environments, ensuring seamless integration with the CS31 fieldbus architecture. It is engineered for high-performance signal processing in distributed I/O applications.Features
Designed for integration with the ABB Procontic CS31 system.
Provides robust binary signal input processing.
Compact hardware design for efficient panel space utilization.
Compatible with standard CS31 fieldbus communication protocols.
ApplicationsThis binary input unit is primarily utilized in industrial automation systems where distributed I/O is required. It is commonly deployed in manufacturing lines, process control systems, and machine automation setups that rely on the CS31 communication standard for signal monitoring and data acquisition.Technical Specifications
Product Model
ICSI08E1-230
Spare Model / Order Code
FPR3316101R0016
Manufacturer
ABB
System Series
Procontic CS31
Weight
0.44 kg
Installation Guidelines
Ensure the power supply is disconnected before installing or removing the module from the rack or DIN rail.
Verify that the module is securely seated in the designated slot to ensure proper backplane communication.
Maintain proper grounding practices to protect against electromagnetic interference (EMI) and electrostatic discharge (ESD).
Ensure adequate ventilation around the module to prevent overheating during continuous operation.
Route signal cables separately from high-voltage power lines to minimize signal noise and crosstalk.
FAQWhat is the primary function of the ICSI08E1-230?The ICSI08E1-230 is a binary input unit used to interface digital signals with the ABB Procontic CS31 automation system.Is this module compatible with other CS31 series components?Yes, this unit is designed specifically for the Procontic CS31 architecture and is intended to function within that ecosystem.What should I do if the module fails to communicate?Check the physical connection to the CS31 bus, verify that the module is properly seated, and ensure that the input voltage levels are within the specified operating range for the unit.
نحن نقدم خدمة التوصيل في اليوم التالي من الاثنين إلى الجمعة إذا كان المنتج موجودًا في المخزون والاستثناءات في أيام العطلات.
عطلات نهاية الأسبوع
نحن لا نقدم أي تسليمات في عطلة نهاية الأسبوع.
دولي
نوفر خدمة التوصيل في اليوم التالي، حسب موقعك. تحقق من حالة طلبك عبر هذا الرابط.
DescriptionThe Allen-Bradley 1756-DMF30 is a specialized single-slot drive interface module designed for the ControlLogix platform. This module functions as a high-speed communication and control bridge between a ControlLogix processor and the Reliance Electric Distributed Power System (DPS) hardware. It coordinates complex outer-loop control algorithms, including precise torque, position, and velocity control, by interfacing directly with a field-mounted Power Module Interface (PMI) chassis via a dedicated fiber optic link.Features
Designed for seamless integration with the ControlLogix backplane.
Supports high-speed communication for complex drive control loops.
Fiber optic interface for reliable communication with remote PMI chassis.
Optimized for legacy Reliance Electric drive system migrations.
Drive System CompatibilityThe 1756-DMF30 is engineered to support legacy high-power Reliance Electric drive systems, including:
SD3000 6-Pulse DPS: Interfaces with S6 DC drives and S6R resolver assemblies.
SD3000 12-Pulse DPS: Connects with S12 DC drives and S12R resolver configurations.
Technical Specifications
Brand
Allen-Bradley
Product Line
ControlLogix
Module Type
Digital Drive Interface Module
Backplane Current (5.1V DC)
1.35 Amps
Backplane Current (24V DC)
3 mA
Peak Power Dissipation
6.96 Watts
Thermal Dissipation
23.7 BTU per hour
MTBF
1.7 million hours
Operating Shock
30G
Slot Width
1 Slot
Installation Guidelines
Ensure the ControlLogix chassis is powered down before inserting or removing the module.
Handle the module using proper ESD (Electrostatic Discharge) precautions.
Ensure the module is fully seated in the chassis slot and secured with the top and bottom mounting screws.
Route fiber optic cables away from high-voltage power lines to prevent EMI interference.
Maintain adequate clearance around the chassis for proper ventilation and thermal management.
FAQWhat is the primary function of the 1756-DMF30?The 1756-DMF30 acts as a communication bridge between a ControlLogix controller and Reliance Electric Distributed Power System (DPS) hardware, enabling advanced drive control functions.Does this module require external power?No, the module draws its power directly from the ControlLogix backplane (5.1V DC and 24V DC).
نحن نقدم خدمة التوصيل في اليوم التالي من الاثنين إلى الجمعة إذا كان المنتج موجودًا في المخزون والاستثناءات في أيام العطلات.
عطلات نهاية الأسبوع
نحن لا نقدم أي تسليمات في عطلة نهاية الأسبوع.
دولي
نوفر خدمة التوصيل في اليوم التالي، حسب موقعك. تحقق من حالة طلبك عبر هذا الرابط.
DescriptionThe Allen-Bradley 1762-IF4 is a high-performance analog input expansion module designed for use with the MicroLogix 1200 and 1400 programmable logic controller systems. This module provides four differential, bipolar analog input channels, allowing for precise monitoring of voltage and current signals in industrial automation environments. It is engineered to integrate seamlessly into the MicroLogix I/O bus, providing reliable data acquisition for process control applications.Features
Four differential, bipolar analog input channels.
Supports both voltage (-10.5 to +10.5V DC) and current (4 to 20 mA) signal ranges.
High-resolution 15-bit data conversion for accurate signal processing.
Repeatability of ±0.12% for consistent measurement performance.
Compact design optimized for MicroLogix expansion racks.
Technical Specifications
Product Model
1762-IF4
Product Family
MicroLogix
Number of Inputs
4 Differential (Bipolar)
Voltage Range
-10.5 to +10.5V DC
Current Range
4 to 20 mA (Full range -21 to +21 mA)
Resolution
15 bit
Repeatability
±0.12%
Weight
0.2 kg
Installation Guidelines
Ensure the controller power is disconnected before installing or removing the module from the I/O bus.
Mount the module in a clean, dry environment with adequate ventilation to prevent overheating.
Use shielded twisted-pair cabling for analog signal connections to minimize electromagnetic interference (EMI).
Ensure proper grounding of the cable shields at the signal source or the module common, depending on system design requirements.
Verify that all terminal connections are secure and that the module is firmly seated in the expansion slot.
FAQWhat is the primary function of the 1762-IF4?The 1762-IF4 is an analog input module that converts external voltage or current signals into digital values that the MicroLogix PLC can process for control and monitoring tasks.Is this module compatible with all MicroLogix controllers?The 1762-IF4 is specifically designed for the MicroLogix 1200 and 1400 series. Please verify your specific controller model's compatibility with 1762-series expansion I/O before installation.Can this module handle both voltage and current inputs?Yes, the module supports both voltage (-10.5 to +10.5V DC) and current (4 to 20 mA) signals, which can be configured per channel via the PLC software.
نحن نقدم خدمة التوصيل في اليوم التالي من الاثنين إلى الجمعة إذا كان المنتج موجودًا في المخزون والاستثناءات في أيام العطلات.
عطلات نهاية الأسبوع
نحن لا نقدم أي تسليمات في عطلة نهاية الأسبوع.
دولي
نوفر خدمة التوصيل في اليوم التالي، حسب موقعك. تحقق من حالة طلبك عبر هذا الرابط.
DescriptionThe Allen-Bradley 1756-LSC8XIB8I is a high-speed counter input module designed for the ControlLogix platform. This module provides eight individually isolated input channels, enabling precise pulse counting and frequency measurement in demanding industrial automation environments. It is engineered to integrate seamlessly into a ControlLogix chassis, offering high-performance signal processing for motion control, flow metering, and position tracking applications.Features
Eight individually isolated input channels for enhanced signal integrity and noise immunity.
High-speed counting capabilities suitable for fast-pulse applications.
Designed for direct integration into the Allen-Bradley ControlLogix I/O architecture.
Supports sophisticated counter configurations to meet specific process requirements.
Robust construction for reliable operation in industrial control panels.
ApplicationsThis module is typically utilized in manufacturing and process control systems where high-speed pulse counting is required. Common applications include conveyor speed monitoring, turbine flow meter integration, rotary encoder feedback, and high-speed batch counting.Technical Specifications
Product Model
1756-LSC8XIB8I
Manufacturer
Allen-Bradley
Platform
ControlLogix
Input Type
High-Speed Counter
Number of Inputs
8 (Individually Isolated)
Weight
0.2 kg
Installation Guidelines
Ensure the ControlLogix chassis is powered down before inserting or removing the module to prevent electrical damage.
Verify that the module is fully seated in the chassis slot and the locking mechanism is engaged.
Use shielded twisted-pair cabling for input signals to minimize electromagnetic interference (EMI).
Ensure proper grounding of the chassis and signal shields according to local electrical codes and Allen-Bradley installation manuals.
Maintain adequate clearance around the module to allow for proper airflow and cooling within the cabinet.
Handle the module using ESD-safe practices to prevent damage to sensitive internal components.
FAQWhat is the primary function of the 1756-LSC8XIB8I?The 1756-LSC8XIB8I is a specialized ControlLogix input module designed to count high-speed pulses from field devices such as encoders or flow meters, providing accurate data to the controller.Are the inputs on this module isolated?Yes, the module features eight individually isolated inputs, which helps prevent ground loops and protects the module circuitry from electrical noise or voltage spikes on individual channels.Is this module compatible with all ControlLogix chassis?The 1756-LSC8XIB8I is designed for standard ControlLogix chassis. Please consult your specific system hardware manual to ensure compatibility with your current firmware and processor revision.
نحن نقدم خدمة التوصيل في اليوم التالي من الاثنين إلى الجمعة إذا كان المنتج موجودًا في المخزون والاستثناءات في أيام العطلات.
عطلات نهاية الأسبوع
نحن لا نقدم أي تسليمات في عطلة نهاية الأسبوع.
دولي
نوفر خدمة التوصيل في اليوم التالي، حسب موقعك. تحقق من حالة طلبك عبر هذا الرابط.
The 2711-NC13 is a high-quality communication cable manufactured by Allen-Bradley, specifically engineered for use with PanelView Plus 6 operator terminals. This RS-232 serial cable is designed to provide reliable data transfer for both programming and operational tasks within industrial automation systems.Features
Designed for seamless integration with PanelView Plus 6 terminals.
Supports RS-232 serial communication protocols for robust data exchange.
Equipped with standard 9-pin D-shell connectors on both ends for secure, reliable connections.
5-meter length provides flexibility for routing within control panels and between devices.
ApplicationsThis cable is primarily used for connecting programming workstations to operator interfaces, facilitating the download of HMI applications, firmware updates, and real-time serial data communication in industrial environments.Technical Specifications
Parameter
Specification Details
Model
2711-NC13
Brand
Allen-Bradley
Cable Type
RS-232 Operating / Programming Cable
Connector Type
9-Pin D-Shell to 9-Pin D-Shell
Length
5 Meters
Operating Temperature
0 to 50 degC
Compatibility
PanelView Plus 6 Terminals
Installation Guidelines
Ensure both the programming device and the PanelView terminal are powered down before connecting or disconnecting the cable to prevent potential electrical damage.
Route the cable away from high-voltage power lines and high-EMI sources to maintain signal integrity.
Secure the D-shell connectors using the integrated thumbscrews to prevent accidental disconnection due to vibration.
Avoid sharp bends or excessive tension on the cable during installation to maintain the integrity of the internal conductors.
نحن نقدم خدمة التوصيل في اليوم التالي من الاثنين إلى الجمعة إذا كان المنتج موجودًا في المخزون والاستثناءات في أيام العطلات.
عطلات نهاية الأسبوع
نحن لا نقدم أي تسليمات في عطلة نهاية الأسبوع.
دولي
نوفر خدمة التوصيل في اليوم التالي، حسب موقعك. تحقق من حالة طلبك عبر هذا الرابط.
The 2711-NL1 is a replacement backlight lamp designed by Allen-Bradley for use with PanelView 550 operator interface terminals. This component is essential for restoring display brightness and screen legibility in legacy HMI units, allowing maintenance teams to address degraded lighting conditions before total display failure occurs. By performing proactive maintenance, operators can minimize unexpected downtime and maintain clear visibility of critical process data.Features
Engineered specifically for PanelView 550 terminals (Series G and below) and PanelView 550 Touch terminals (Series A only).
Restores optimal screen luminance for improved operator interaction.
Rated for a service life of 20,000 hours under standard operating conditions.
Compact, industrial-grade design for straightforward field replacement.
ApplicationsThis backlight lamp is intended for use in industrial control environments where PanelView 550 HMI units are deployed. It is a critical spare part for maintenance technicians responsible for the upkeep of legacy automation interfaces in manufacturing, processing, and utility facilities.Technical Specifications
Model
2711-NL1
Brand
Allen-Bradley
Operating Voltage
5 V
Current Draw
1 A
Power Consumption
5 W
Rated Bulb Life
20,000 hours
Operating Temperature
0 to 55 degC
Installation Guidelines
Ensure the PanelView terminal is fully disconnected from the power source before attempting to access or replace the lamp.
Handle the replacement lamp with care; avoid touching the glass surface directly to prevent oil deposits that may affect thermal performance.
Verify that the HMI terminal series (Series G and below for standard, Series A for Touch) is compatible with this specific lamp model before installation.
Ensure the lamp is securely seated in the connector to prevent flickering or intermittent display issues.
After installation, re-assemble the housing according to the original equipment manufacturer's service manual to maintain the integrity of the enclosure.
FAQIs this lamp compatible with all PanelView 550 models?The 2711-NL1 is compatible with PanelView 550 terminals (Series G and below) and PanelView 550 Touch terminals (Series A only). Please check your specific unit's series label before purchase.What is the expected lifespan of this lamp?The rated bulb life is 20,000 hours under normal operating conditions within the specified temperature range.
نحن نقدم خدمة التوصيل في اليوم التالي من الاثنين إلى الجمعة إذا كان المنتج موجودًا في المخزون والاستثناءات في أيام العطلات.
عطلات نهاية الأسبوع
نحن لا نقدم أي تسليمات في عطلة نهاية الأسبوع.
دولي
نوفر خدمة التوصيل في اليوم التالي، حسب موقعك. تحقق من حالة طلبك عبر هذا الرابط.
DescriptionThe Allen-Bradley 2711-K3A17L1 is a PanelView 300 Standard Operator Terminal designed for industrial human-machine interface (HMI) applications. This compact unit features a 3-inch monochrome transflective LCD display with an integrated LED backlight, providing clear visibility in various lighting conditions. It is engineered for reliable performance in demanding environments, utilizing a keypad-based input method for precise operator control.Features
3-inch monochrome transflective LCD display with LED backlight.
Integrated keypad assembly featuring 8 function keys (F1 through F8), dedicated cursor keys, and numeric entry keys.
RS-232 (DF1) communication port for seamless integration with PLC controllers.
240 KB nonvolatile memory for application storage.
170 KB of dedicated application runtime memory.
Compact design suitable for space-constrained control panels.
Technical Specifications
Product Model
2711-K3A17L1
Product Line
PanelView 300
Input Power
18 to 32V DC (24V DC nominal)
Display Size
3 inches
Display Type
Monochrome Transflective LCD
Input Method
Keypad
Communication
RS-232 (DF1)
Nonvolatile Memory
240 KB
Application Runtime Memory
170 KB
Weight
0.56 kg
Installation Guidelines
Ensure the panel cutout is prepared according to the manufacturer's mounting template to maintain the integrity of the enclosure seal.
Use shielded communication cables for the RS-232 port to minimize electromagnetic interference (EMI).
Verify that the power supply provides a stable 24V DC source within the 18-32V DC range before connecting.
Ensure proper grounding of the terminal chassis to a common earth ground to prevent electrical noise issues.
The terminal should be installed in an environment that meets the specified operating temperature and humidity ratings to ensure longevity.
Always power down the device before connecting or disconnecting communication cables or power leads.
FAQWhat type of communication does the 2711-K3A17L1 support?This model is equipped with an RS-232 (DF1) communication port, which allows it to communicate directly with Allen-Bradley controllers and other compatible devices using the DF1 protocol.Can this terminal be used for color graphics?No, the 2711-K3A17L1 features a monochrome transflective LCD display. It is designed for text-based and simple graphical interface applications.What is the primary input method for this device?The device uses a physical keypad assembly, which includes 8 function keys (F1-F8), cursor navigation keys, and a numeric keypad for data entry.
نحن نقدم خدمة التوصيل في اليوم التالي من الاثنين إلى الجمعة إذا كان المنتج موجودًا في المخزون والاستثناءات في أيام العطلات.
عطلات نهاية الأسبوع
نحن لا نقدم أي تسليمات في عطلة نهاية الأسبوع.
دولي
نوفر خدمة التوصيل في اليوم التالي، حسب موقعك. تحقق من حالة طلبك عبر هذا الرابط.
Description
The Allen-Bradley 1756-OB16IEFS is a high-performance, digitally isolated, scheduled DC fast output module designed for the ControlLogix 1756 chassis platform. This module is engineered for precision timing applications, serving as the primary solution for executing Motion Axis Output Cam (MAOC) instructions in remote chassis configurations. By utilizing CIP Sync Time, the module provides deterministic output control with scheduling intervals as low as 5 microseconds, making it essential for high-speed industrial processes such as flying shears, rotary packaging, and automated glue extrusion.
Features
16 independently isolated, source/sink DC output channels.
CIP Sync slave-only device for time-stamped output scheduling.
Integrated electronic fusing per point for enhanced circuit protection.
Supports high-accuracy Pulse Width Modulation (PWM) with configurable duty cycles.
Hot-swappable design allows for module replacement without removing field wiring when paired with a compatible Removable Terminal Block (RTB).
Programmable fault states including Hold Last State, ON, or OFF.
Applications
This module is ideal for time-critical automation tasks requiring microsecond-level synchronization. Typical applications include:
High-speed bottling and sortation systems.
Rotary packaging knives and cutting machinery.
Flying shear and synchronized motion control.
Precision glue extrusion and application systems.
Technical Specifications
Parameter
Specification
Model
1756-OB16IEFS
Voltage Category
12/24 VDC
Operating Voltage Range
10 to 30 VDC
Number of Outputs
16 (Isolated)
Min. Scheduling Interval
5 microseconds
Unscheduled Output Delay
14 microseconds (nominal)
Backplane Power Consumption
1.7 Watts
Max. Module Power Dissipation
3.6 Watts @ 60 deg C
Isolation Voltage
250 V continuous
Compatible RTB
1756-TBCH, 1756-TBS6H
Installation Guidelines
Ensure the ControlLogix chassis is powered down before inserting or removing the module to prevent electrical arcing or backplane damage.
The module occupies one standard slot in the 1756 chassis.
Use only compatible 1756-TBCH or 1756-TBS6H Removable Terminal Blocks for field wiring.
Maintain proper grounding practices for the chassis to minimize EMI interference, especially in high-speed motion applications.
Ensure adequate ventilation around the chassis to maintain operating temperatures within the specified limits, as power dissipation can reach 3.6 Watts.
Handle with ESD-safe precautions to protect internal circuitry.
FAQ
Q: Can this module be used in a remote chassis?A: Yes, the 1756-OB16IEFS is specifically designed to function in a remote chassis while executing MAOC instructions and receiving output data echoes.
Q: What is the minimum PWM cycle time?A: The module supports a minimum PWM cycle time of 1 millisecond.
Q: Does this module require a specific terminal block?A: Yes, it requires a 1756-TBCH (cage clamp) or 1756-TBS6H (spring clamp) Removable Terminal Block for field wiring connections.
نحن نقدم خدمة التوصيل في اليوم التالي من الاثنين إلى الجمعة إذا كان المنتج موجودًا في المخزون والاستثناءات في أيام العطلات.
عطلات نهاية الأسبوع
نحن لا نقدم أي تسليمات في عطلة نهاية الأسبوع.
دولي
نوفر خدمة التوصيل في اليوم التالي، حسب موقعك. تحقق من حالة طلبك عبر هذا الرابط.
DescriptionThe Allen-Bradley 1791-16BC is a block I/O module designed for industrial automation applications. This unit provides 16 inputs and 16 outputs, operating within a 10-30 VDC voltage range. As a compact block I/O solution, it is engineered to interface field devices directly with the control system, facilitating efficient signal processing in distributed I/O architectures.Features
16 inputs organized into 2 groups of 8.
16 discrete outputs for versatile control.
Compatible with 24V DC control systems.
Robust block-style housing for industrial environments.
Wide operating voltage range of 10-30V DC.
Technical Specifications
Product Model
1791-16BC
Inputs
16 (2 groups of 8)
On-state Voltage Range
10-30V DC
Off-state Current (Max)
11.0mA @ 30V
Off-state Current (Min)
2.5mA @ 10V
Off-state Voltage (Max)
5V DC
Input Impedance (Max)
3.4K ohms
Min On-state Current (Output)
1mA per output
Max On-state Voltage Drop
1.0V @ rated current
Off-state Leakage Current (Max)
0.5mA
Output Signal Delay
0.5ms on / 1.0ms off
Installation Guidelines
Ensure the power supply is disconnected before installing or removing the module to prevent electrical damage.
Mount the module in a location that allows for adequate ventilation and cooling to maintain optimal operating temperatures.
Use shielded cables for I/O connections to minimize electromagnetic interference (EMI) in high-noise industrial environments.
Verify that all wiring connections are secure and properly terminated according to the module's terminal layout.
Handle the module with care, adhering to standard ESD (Electrostatic Discharge) protection practices during installation.
FAQIs the 1791-16BC still in production?No, the Allen-Bradley 1791-16BC was officially discontinued by the manufacturer on June 30, 2015. We provide high-quality surplus or refurbished units to support legacy systems.What are the compatible spare models for this unit?The 1791-16BC is often interchangeable with revisions 1791-16BC/B and 1791-16BC/C, depending on your specific system requirements.
نحن نقدم خدمة التوصيل في اليوم التالي من الاثنين إلى الجمعة إذا كان المنتج موجودًا في المخزون والاستثناءات في أيام العطلات.
عطلات نهاية الأسبوع
نحن لا نقدم أي تسليمات في عطلة نهاية الأسبوع.
دولي
نوفر خدمة التوصيل في اليوم التالي، حسب موقعك. تحقق من حالة طلبك عبر هذا الرابط.
DescriptionThe Allen-Bradley 1756-OB16IEF is a high-performance ControlLogix DC digital output module designed for demanding industrial automation applications. As a fast, isolated output module, it provides 16 points of 10-30 VDC output capability, supporting individual point isolation and high-speed switching requirements. This module is engineered for integration within ControlLogix chassis systems, offering reliable peer-to-peer output functionality and pulse-width modulation (PWM) support for precise control tasks.Features
16 isolated DC digital output points.
Operating voltage range: 10-30 VDC.
High-speed output switching capability for fast-response applications.
Supports peer-to-peer communication and PWM (Pulse Width Modulation).
1 A output current rating per point.
Designed for seamless integration into the Allen-Bradley ControlLogix platform.
ApplicationsThis module is typically utilized in manufacturing and process control environments where high-speed digital switching and electrical isolation between channels are required. It is well-suited for motion control, high-speed solenoid actuation, and complex logic sequences requiring PWM output control.Technical Specifications
Model
1756-OB16IEF
Module Type
Fast Isolated DC Output
Point Count
16
Voltage Range
10-30 VDC
Output Current
1 A per point
Compatibility
ControlLogix System
Installation Guidelines
Ensure the ControlLogix chassis is powered down before inserting or removing the module to prevent electrical damage.
Verify that the module is fully seated in the chassis slot and secured with the top and bottom latches.
Use appropriate shielded cabling for I/O connections to minimize electromagnetic interference (EMI).
Ensure proper grounding of the chassis backplane to maintain signal integrity.
Follow standard ESD (Electrostatic Discharge) handling procedures when touching the module circuitry.
Check that the external power supply connected to the output points is within the 10-30 VDC range before applying power.
FAQWhat does the 'F' in 1756-OB16IEF stand for?The 'F' indicates that this is a 'Fast' output module, designed for applications requiring faster switching speeds compared to standard output modules.Does this module support PWM?Yes, the 1756-OB16IEF supports Pulse Width Modulation (PWM), making it suitable for applications requiring variable duty cycle control.
نحن نقدم خدمة التوصيل في اليوم التالي من الاثنين إلى الجمعة إذا كان المنتج موجودًا في المخزون والاستثناءات في أيام العطلات.
عطلات نهاية الأسبوع
نحن لا نقدم أي تسليمات في عطلة نهاية الأسبوع.
دولي
نوفر خدمة التوصيل في اليوم التالي، حسب موقعك. تحقق من حالة طلبك عبر هذا الرابط.
DescriptionThe ABB FPR3315101R1032, also identified by the model designation ICSI16D1, is a remote I/O unit designed for the ABB Procontic CS31 fieldbus system. This module serves as a distributed input/output interface, allowing for the expansion of control capabilities in industrial automation environments by connecting remote sensors and actuators to the central controller via the CS31 bus protocol.Features
Designed for integration with the ABB Procontic CS31 fieldbus architecture.
Supports 24 Vdc power supply for standard industrial control loops.
Compact design optimized for space-constrained control cabinets.
Reliable data communication for distributed I/O applications.
Technical Specifications
Manufacturer
ABB
Model / Order Code
FPR3315101R1032
Spare Model
ICSI16D1
System Series
Procontic CS31
Supply Voltage
24 Vdc
Product Type
Remote I/O Unit
Tariff Code
8538907080
Installation Guidelines
Ensure the power supply is disconnected before installing or removing the module from the mounting rail.
The module should be installed in a clean, dry environment within the specified temperature range to prevent component degradation.
Maintain proper grounding practices to minimize electromagnetic interference (EMI) and ensure signal integrity on the CS31 bus.
Ensure adequate ventilation around the unit to prevent overheating during continuous operation.
Use shielded communication cables for the CS31 bus connection to reduce noise susceptibility in industrial environments.
FAQWhat is the primary function of the ICSI16D1?The ICSI16D1 is a remote I/O unit used to extend the I/O capacity of an ABB Procontic CS31 PLC system, allowing the controller to interface with field devices located at a distance from the main processor.Is this module compatible with other fieldbus systems?No, this module is specifically designed for the ABB Procontic CS31 fieldbus protocol and is not compatible with other protocols like Profibus or Modbus unless used with a specific gateway.
نحن نقدم خدمة التوصيل في اليوم التالي من الاثنين إلى الجمعة إذا كان المنتج موجودًا في المخزون والاستثناءات في أيام العطلات.
عطلات نهاية الأسبوع
نحن لا نقدم أي تسليمات في عطلة نهاية الأسبوع.
دولي
نوفر خدمة التوصيل في اليوم التالي، حسب موقعك. تحقق من حالة طلبك عبر هذا الرابط.
DescriptionThe Allen-Bradley 1794-OF4I is a high-performance isolated analog output module designed for use within the FLEX I/O platform. This module provides four isolated analog output channels, allowing for precise control of field devices in industrial automation environments. It is engineered to operate on a 24V DC power supply, ensuring compatibility with standard industrial control system architectures.Features
Four isolated analog output channels for enhanced signal integrity and noise immunity.
Designed for the FLEX I/O system, providing a compact and flexible footprint.
Operates on 24V DC nominal power.
Supports a variety of output ranges suitable for industrial instrumentation and actuator control.
ApplicationsThis module is typically utilized in distributed I/O applications where galvanic isolation is required to prevent ground loops and electrical interference. It is commonly deployed in process control, manufacturing, and machine automation systems to drive proportional valves, variable frequency drives, or other analog-controlled field equipment.Technical Specifications
Product Model
1794-OF4I
Manufacturer
Allen-Bradley
Product Type
Isolated Analog Output Module
Number of Channels
4
Operating Voltage
24V DC
System Compatibility
FLEX I/O
Installation Guidelines
Ensure the system power is disconnected before installing or removing the module from the terminal base.
Mount the module onto a compatible FLEX I/O terminal base (e.g., 1794-TB2, 1794-TB3).
Use shielded twisted-pair cabling for analog signals to minimize electromagnetic interference (EMI).
Ensure proper grounding of the terminal base to the chassis ground to maintain signal accuracy and system safety.
Avoid routing analog signal cables alongside high-voltage power lines or inductive loads.
Handle the module using ESD-safe practices to prevent damage to internal electronic components.
FAQWhat is the primary function of the 1794-OF4I?The 1794-OF4I is an isolated analog output module used to convert digital data from the controller into analog signals to drive external field devices.Is this module compatible with other FLEX I/O components?Yes, the 1794-OF4I is designed to plug directly into standard Allen-Bradley FLEX I/O terminal bases, allowing it to be integrated into a distributed I/O network.What does the 'I' in the model number signify?The 'I' in 1794-OF4I indicates that the module features channel-to-channel or system-to-channel isolation, which is critical for protecting the module and the controller from electrical faults in the field wiring.
