تُقدّم ألين-برادلي، التابعة لشركة روكويل أوتوميشن، مجموعةً واسعةً من منتجات الأتمتة الصناعية. بدءًا من وحدات التحكم المنطقية القابلة للبرمجة (PLCs) ولوحات واجهة الإنسان والآلة (HMIs)، وصولًا إلى وحدات ووحدات التحكم في الإدخال/الإخراج (I/O)، تضمن حلول ألين-برادلي تحكمًا صناعيًا موثوقًا وفعالًا وقابلًا للتطوير في المصانع حول العالم.
نحن نقدم خدمة التوصيل في اليوم التالي من الاثنين إلى الجمعة إذا كان المنتج موجودًا في المخزون والاستثناءات في أيام العطلات.
عطلات نهاية الأسبوع
نحن لا نقدم أي تسليمات في عطلة نهاية الأسبوع.
دولي
نوفر خدمة التوصيل في اليوم التالي، حسب موقعك. تحقق من حالة طلبك عبر هذا الرابط.
DescriptionThe Allen-Bradley 2711-B5A3L1 is a PanelView 550 operator terminal designed for reliable human-machine interface (HMI) applications in industrial environments. This DC-powered unit serves as a critical control interface, allowing operators to monitor system variables, execute manual commands, and manage automated processes. Built for durability, the terminal replaces complex physical pushbutton arrays with a consolidated electronic interface, reducing wiring requirements and enhancing system uptime in sectors such as petrochemical, water treatment, and automated packaging.Features
Hybrid input configuration featuring both an analog resistive touchscreen and a 10-key tactile function keypad (F1-F10).
5.5-inch monochrome blue-mode LCD display with 256 x 128 pixel resolution.
Integrated DH-485 communication port for multi-node network connectivity.
Dedicated RS-232 serial port for local printer data logging.
170 KB of application runtime memory with non-volatile storage for screen data.
Field-replaceable backlight module (2711-NL1) to extend operational life.
ApplicationsThis operator terminal is suitable for a wide range of industrial automation tasks, including machine control, process monitoring, and data logging in manufacturing facilities. Its robust design allows for operation in high-vibration environments where traditional mechanical interfaces might fail.Technical Specifications
Model
2711-B5A3L1
Product Line
PanelView 550
Input Power
24 VDC nominal
Display Size
5.5 inches
Display Type
Monochrome blue-mode LCD
Resolution
256 x 128 pixels
Input Method
Touchscreen and Keypad
Memory
170 KB application runtime
Communication
DH-485 and RS-232 (Printer)
Operating Temperature
0 to 55 deg C
Lifecycle Status
Discontinued / Obsolete
Installation Guidelines
Ensure the terminal is mounted in a panel with adequate clearance for ventilation and cable routing.
Verify that the 24 VDC power supply is stable and properly grounded to prevent electrical noise interference.
Use shielded communication cables for DH-485 and RS-232 connections to maintain signal integrity.
Power down the unit before performing any maintenance, such as replacing the 2711-NL1 backlight module.
Handle the unit with standard ESD precautions during installation to protect internal circuitry.
FAQIs the 2711-B5A3L1 still supported by the manufacturer?The 2711-B5A3L1 is classified as a discontinued or obsolete product. While it remains a reliable component for existing legacy systems, users should plan for eventual migration to modern HMI platforms.Can I replace the backlight on this unit?Yes, the display backlight is field-replaceable using the 2711-NL1 replacement module.What communication protocols does this terminal support?This model features an integrated DH-485 port for network communication and an independent RS-232 serial port specifically for printer data logging.
نحن نقدم خدمة التوصيل في اليوم التالي من الاثنين إلى الجمعة إذا كان المنتج موجودًا في المخزون والاستثناءات في أيام العطلات.
عطلات نهاية الأسبوع
نحن لا نقدم أي تسليمات في عطلة نهاية الأسبوع.
دولي
نوفر خدمة التوصيل في اليوم التالي، حسب موقعك. تحقق من حالة طلبك عبر هذا الرابط.
DescriptionThe Allen-Bradley 1336-PB-SP2C is a precharge printed circuit board (PCB) designed for use within the 1336 series variable frequency drive systems. This component serves as a critical spare part for managing the DC bus precharge sequence, ensuring that inrush currents are limited during the initial power-up phase of the drive to protect internal capacitors and power electronics.Features
Original Allen-Bradley replacement component
Specifically designed for 1336 series drive architecture
Facilitates controlled DC bus charging to prevent component stress
Direct replacement for specified 1336 drive configurations
ApplicationsThis precharge board is utilized in industrial motor control applications where 1336 series drives are deployed. It is typically required during maintenance or repair of drives experiencing precharge circuit failures or DC bus charging faults.Technical Specifications
Product Model
1336-PB-SP2C
Spare Model / Ref
74101-502-57
Component Type
Precharge PC Board
Manufacturer
Allen-Bradley
Weight
0.3 kg
Installation Guidelines
Ensure the drive is fully disconnected from all power sources and that the DC bus capacitors have been verified as discharged before attempting to access the internal electronics.
Use proper Electrostatic Discharge (ESD) protection, such as a grounded wrist strap, when handling the circuit board to prevent damage to sensitive components.
Carefully align the board with the mounting standoffs and ensure all connectors are fully seated before re-applying power.
Verify that no loose debris or foreign objects remain inside the drive chassis after installation.
FAQIs this part still in production?No, the 1336-PB-SP2C has been discontinued by the manufacturer. We provide this as a high-quality spare part for legacy system support.What is the function of the precharge board?The precharge board limits the initial inrush current when the drive is energized, preventing damage to the input rectifiers and DC bus capacitors.
DescriptionThe Allen-Bradley 1756-L63/B is a high-performance Programmable Automation Controller (PAC) belonging to the ControlLogix 5563 Series B hardware family. Designed for demanding industrial environments, this chassis-mounted processor manages complex discrete, motion, and process control applications. It is engineered to handle large logical sequences, analog control matrices, and multi-network communication pipelines, ensuring deterministic system cycles. The controller's multi-tasking operating engine segregates execution routines to minimize processing delays, thereby enhancing system stability and reducing the risk of unscheduled downtime in distributed factory architectures.Features
High-Capacity Processing: Supports up to 32 concurrent controller tasks with up to 100 programs per task.
Memory Specifications: Equipped with 8 MB of user volatile memory and 478 KB of dedicated I/O memory; supports up to 128 MB of non-volatile storage via an optional 1784-CF128 CompactFlash card.
Communication Versatility: Features an integrated RS-232 serial port supporting DF1, DH-485, ASCII, and Modbus protocols. Supports extensive network expansion via optional bridges for EtherNet/IP, ControlNet, DeviceNet, and SynchLink.
Redundancy Support: Capable of full hardware redundancy with localized synchronization links for bumpless switchover operations.
Robust Design: Built for industrial reliability with a 30 g operating shock rating and 2 g vibration tolerance.
ApplicationsThe 1756-L63/B is widely deployed in critical infrastructure and heavy industrial sectors, including oil and gas refining, electrical power generation, water treatment, and large-scale manufacturing automation.Technical Specifications
Model
1756-L63/B
Series
ControlLogix 5563 (Series B)
User Memory
8 MB RAM
Discrete I/O Capacity
128,000 Points
Analog I/O Capacity
4,000 Points
Backplane Current (5.1V)
1.2 A
Power Dissipation
3.5 W
Operating Temperature
0 to 60 deg C
Relative Humidity
5 to 95% (non-condensing)
Battery Type
1756-BA2 Lithium
Installation Guidelines
Chassis Mounting: Designed for installation in standard 1756 ControlLogix chassis. Ensure the module is fully seated and the top/bottom retaining latches are locked.
Power Requirements: Ensure the chassis power supply (e.g., 1756-PA75, 1756-PB75) is sized correctly to handle the 1.2 A current draw at 5.1 VDC.
ESD Precautions: Always use a properly grounded wrist strap when handling the module to prevent electrostatic discharge damage to internal components.
Environment: Maintain ambient temperatures between 0 and 60 deg C. Ensure adequate airflow within the cabinet to stay within the 3.5 W power dissipation limit.
Battery Handling: Install the 1756-BA2 battery prior to operation to maintain memory during power cycles. Replace the battery only when the controller is powered to avoid data loss.
FAQWhat is the primary difference between the 1756-L63/B and previous versions?The 1756-L63/B is a Series B controller, which offers improved hardware reliability and compatibility with updated firmware versions compared to earlier Series A models. It is specifically designed to support the 1756-BA2 lithium battery.Can this module be used in a redundant configuration?Yes, the 1756-L63/B supports hardware redundancy when paired with a compatible redundant controller pair and synchronization modules, allowing for bumpless switchovers in critical applications.Does this module include a CompactFlash card?No, the 1784-CF128 CompactFlash card is an optional accessory used for non-volatile memory storage and program backup; it must be purchased separately.
نحن نقدم خدمة التوصيل في اليوم التالي من الاثنين إلى الجمعة إذا كان المنتج موجودًا في المخزون والاستثناءات في أيام العطلات.
عطلات نهاية الأسبوع
نحن لا نقدم أي تسليمات في عطلة نهاية الأسبوع.
دولي
نوفر خدمة التوصيل في اليوم التالي، حسب موقعك. تحقق من حالة طلبك عبر هذا الرابط.
DescriptionThe Allen-Bradley 2711-K5A1 is a robust, industrial-grade human-machine interface (HMI) from the PanelView 550 Standard series. Designed for reliable process visualization and machine control, this terminal is engineered to withstand the rigors of demanding factory environments. It serves as a critical localized operational node, providing operators with real-time graphical feedback, diagnostic data, and control capabilities to streamline production and minimize downtime.Features
Tactile Input Assembly: Features a durable keypad with 10 programmable function keys (F1-F10), a full numerical keypad, and dedicated navigation buttons for precise operator input.
Display Technology: Equipped with a 5.5-inch monochrome transflective LCD (blue mode) offering a 256 x 128 resolution for clear visualization of machine states.
Long-Life Backlight: Integrated LED backlight rated for up to 100,000 hours of continuous operation.
Communication Connectivity: Includes a built-in Remote I/O (RIO) port for daisy-chain topology and an RS-232 serial port dedicated to printer and alarm logging tasks.
Rugged Enclosure: Rated NEMA 12/13 and 4X (IP54/IP65) for protection against dust, debris, and liquid splashes in indoor industrial settings.
ApplicationsThe 2711-K5A1 is widely utilized in sectors such as automotive sub-assembly, bulk material handling, and municipal water/wastewater management. It is ideal for applications requiring a compact, reliable interface for monitoring active control loops and managing machine diagnostics.Technical Specifications
Model
2711-K5A1
Display Size
5.5 inches
Resolution
256 x 128 pixels
Input Voltage
85 to 264 VAC (47-63 Hz)
Runtime Memory
170 KB
Nonvolatile Memory
240 KB
Communication
Remote I/O (RIO), RS-232 Printer Port
Weight
1.28 kg
Installation Guidelines
Mounting: Ensure the panel cutout is clean and free of burrs. Use the provided mounting clips to secure the unit against the enclosure gasket to maintain the NEMA/IP rating.
Power Wiring: Verify the input voltage is within the 85-264 VAC range before applying power. Ensure a dedicated ground connection is established to prevent electrical noise interference.
Communication: Use shielded cabling (e.g., Belden 9463 for RIO) and keep signal wires separate from high-voltage power lines to minimize EMI.
Maintenance: Power down the unit before performing any hardware maintenance or cable connections. Clean the display surface only with a soft, non-abrasive cloth.
FAQIs the 2711-K5A1 compatible with modern Ethernet networks?No, this specific model utilizes Remote I/O (RIO) and RS-232 serial communication. It is designed for legacy Allen-Bradley control architectures and does not support Ethernet/IP natively.What is the primary function of the RS-232 port?The RS-232 port on this unit is dedicated to printer operations and real-time process alarm logging, rather than general-purpose PLC communication.
نحن نقدم خدمة التوصيل في اليوم التالي من الاثنين إلى الجمعة إذا كان المنتج موجودًا في المخزون والاستثناءات في أيام العطلات.
عطلات نهاية الأسبوع
نحن لا نقدم أي تسليمات في عطلة نهاية الأسبوع.
دولي
نوفر خدمة التوصيل في اليوم التالي، حسب موقعك. تحقق من حالة طلبك عبر هذا الرابط.
DescriptionThe Allen-Bradley 1756-L73S is a high-performance GuardLogix 5570 series controller designed for integrated safety and standard control applications. As part of the ControlLogix platform, this processor provides the computational power and safety integrity required for complex machine automation and process safety tasks. It features dedicated safety memory and supports the high-speed communication capabilities inherent to the Logix5570 architecture.Features
Integrated safety and standard control in a single controller.
4 MB of dedicated safety memory for safety-rated applications.
Includes 1GB non-volatile memory for program storage and data logging.
High-capacity I/O support, capable of managing up to 128,000 I/O points.
Optimized for demanding industrial environments requiring SIL 3 safety ratings.
Standard ControlLogix chassis-based mounting for modular flexibility.
Technical Specifications
Product Model
1756-L73S
Controller Series
GuardLogix 5570
Safety Memory
4 MB
Non-volatile Memory
1 GB
Maximum I/O Capacity
128,000
I/O Memory
0.98 MB
Current Draw (1.2V DC)
5 mA
Current Draw (5.1V DC)
800 mA
Power Dissipation
2.5 Watts
Installation Guidelines
Ensure the ControlLogix chassis is properly grounded before installing the module.
The 1756-L73S must be installed in a standard ControlLogix chassis; ensure the module is fully seated and the locking latch is engaged.
Always power down the chassis backplane before inserting or removing the processor module to prevent electrical damage.
Maintain adequate clearance around the chassis for proper airflow and cooling, as the module dissipates 2.5 Watts of power.
Handle the module using ESD-safe practices to prevent damage to sensitive internal components.
Route communication cables away from high-voltage power lines to minimize electromagnetic interference (EMI).
FAQWhat is the primary function of the 1756-L73S?The 1756-L73S is a GuardLogix safety controller used to execute both standard control logic and safety-related control logic within a single, integrated ControlLogix system.Does this controller require a specific chassis?Yes, this module is designed for use in a standard Allen-Bradley ControlLogix chassis. It occupies a single slot in the chassis.Is the non-volatile memory included?Yes, the 1756-L73S ships with a 1GB non-volatile memory card for storage of the controller project and data.
نحن نقدم خدمة التوصيل في اليوم التالي من الاثنين إلى الجمعة إذا كان المنتج موجودًا في المخزون والاستثناءات في أيام العطلات.
عطلات نهاية الأسبوع
نحن لا نقدم أي تسليمات في عطلة نهاية الأسبوع.
دولي
نوفر خدمة التوصيل في اليوم التالي، حسب موقعك. تحقق من حالة طلبك عبر هذا الرابط.
DescriptionThe Allen-Bradley 1492-AIFM8-3 is an 8-channel feed-through Analog Interface Module (AIFM) designed to simplify field wiring for PLC analog I/O systems. This module serves as a bridge between field devices and the controller, providing a clean, organized termination point that reduces the need for external terminal blocks and jumper accessories. It features 3 terminals per input channel, allowing for efficient signal, common, and shield connections.Features
8-channel feed-through design for streamlined analog signal management.
3 terminals per input channel to support signal, common, and shield wiring.
Integrated power bus with eight extra terminals jumpered together for common or power supply distribution.
Internal jumpering to the D-shell housing for effective shield grounding.
Compatible with various PLC analog I/O cards, facilitating faster panel assembly and maintenance.
ApplicationsThis interface module is widely used in industrial control panels where high-density analog I/O is required. It is commonly deployed with Allen-Bradley SLC 500 and ControlLogix systems to interface with sensors, transmitters, and actuators, ensuring reliable signal integrity and simplified troubleshooting.Technical Specifications
Model
1492-AIFM8-3
Channels
8
Terminals per Channel
3
Rated Voltage
0 – 132 V AC
Rated Current
2 A per channel
Operating Temperature
0 to +60 degC
Storage Temperature
-40 to +85 degC
Humidity
5 – 95 % RH, non-condensing
Installation Guidelines
Ensure the control system power is disconnected before installing or removing the module.
Mount the AIFM securely on a standard DIN rail within the control cabinet.
Verify that the field-side wiring does not exceed the rated voltage and current specifications of the module.
Utilize the commoned power bus terminals for efficient distribution of common or power supply lines.
Ensure proper grounding by connecting the shield terminals as required by the specific I/O module pinout.
Maintain adequate spacing for ventilation to ensure the module operates within the specified temperature range.
FAQsWhat is the 1492-AIFM8-3?The 1492-AIFM8-3 is an 8-channel analog interface module that provides 3 terminals per channel, supporting 16 single-ended points or 8 differential points, simplifying panel wiring by consolidating connections for faster installation.Can it handle 16 single-ended channels?Yes, it supports 16 single-ended analog points by providing shared common and shield terminals, allowing for 16 inputs or outputs using the 3-terminal-per-channel configuration.Is this product brand new?Yes, the 1492-AIFM8-3 is supplied as a new, original, and factory-sealed unit.Do you provide a warranty?We provide a full 12-month warranty for this module, covering any defects from the date of delivery.
نحن نقدم خدمة التوصيل في اليوم التالي من الاثنين إلى الجمعة إذا كان المنتج موجودًا في المخزون والاستثناءات في أيام العطلات.
عطلات نهاية الأسبوع
نحن لا نقدم أي تسليمات في عطلة نهاية الأسبوع.
دولي
نوفر خدمة التوصيل في اليوم التالي، حسب موقعك. تحقق من حالة طلبك عبر هذا الرابط.
Description
The Allen-Bradley 1756-PB75 is a high-performance, standard DC power supply module designed specifically for the ControlLogix platform. This module is engineered to provide reliable power to the chassis backplane, converting an 18-32V DC input into the necessary logic voltages (1.2V, 3.3V, 5.1V, and 24V DC) required by ControlLogix I/O and processor modules. With a maximum output power rating of 75W, it is capable of supporting fully populated chassis configurations in demanding industrial environments.
Features
75W maximum output power at 60 degC.
Designed for dedicated mounting on the far-left slot of a 1756 chassis.
Wide input voltage range: 18-32V DC (24V DC nominal).
Integrated overcurrent and overvoltage protection for backplane safety.
250V continuous galvanic isolation between the power source and backplane logic.
Compatible with standard 1756 Series B and C chassis (1756-A4, A7, A10, A13, A17).
Technical Specifications
Product Model
1756-PB75
Module Type
Standard DC Power Supply
Input Voltage
24V DC (Nominal)
Input Range
18-32V DC
Output Power
75W at 60 degC
Input Power
95W
Mounting
ControlLogix Chassis (Leftmost Slot)
Weight
0.98 kg
Applications
Water and Wastewater Treatment: Powering controllers for dosing pumps and flow valves.
Food and Beverage Production: Supporting automation for pasteurization and bottling lines.
Chemical and Petrochemical: Providing stable power for high-precision PID control loops.
HVAC and Climate Control: Managing industrial cooling towers and damper systems.
Metals and Mining: Supporting hydraulic press control and position monitoring.
Installation Guidelines
Ensure the power supply is installed in the dedicated leftmost slot of the 1756 chassis.
Always disconnect the main power source before inserting or removing the module from the chassis.
Ensure proper grounding of the chassis to minimize EMI and protect against electrical surges.
Maintain adequate clearance around the chassis to allow for proper airflow and cooling, as the unit is rated for operation up to 60 degC.
Use appropriately sized wiring for the 24V DC input to prevent voltage drop.
FAQ
What is the difference between the 1756-PA75 and 1756-PB75?
The 1756-PA75 is designed for AC power input (85-264V AC), whereas the 1756-PB75 is designed for DC power input (18-32V DC).
Which chassis are compatible with this power supply?
The 1756-PB75 is compatible with standard 1756 Series B and C chassis, including models 1756-A4, A7, A10, A13, and A17.
نحن نقدم خدمة التوصيل في اليوم التالي من الاثنين إلى الجمعة إذا كان المنتج موجودًا في المخزون والاستثناءات في أيام العطلات.
عطلات نهاية الأسبوع
نحن لا نقدم أي تسليمات في عطلة نهاية الأسبوع.
دولي
نوفر خدمة التوصيل في اليوم التالي، حسب موقعك. تحقق من حالة طلبك عبر هذا الرابط.
DescriptionThe Allen-Bradley 1746-WS is a high-precision weigh scale module designed for the SLC 500 controller platform. It serves as a direct interface between the PLC and industrial load cells, eliminating the need for external weight transmitters. This module is ideal for industrial weighing applications such as tank/vessel weighing, hopper scales, and platform scales where high accuracy and reliability are required.Features
Supports up to eight (8) full Wheatstone bridge, strain gauge load sensors on a single vessel.
Provides a stable 5V DC excitation voltage to the load cells.
Processes millivolt signals into accurate weight data for the SLC processor.
Conversion rate of 20 updates per second for responsive weight monitoring.
Includes two standard digital TTL level outputs for process control.
Integrated common-mode rejection of 110 dB (at or below 60 Hz).
Applications
Tank and vessel level monitoring.
Hopper and silo weighing systems.
Industrial platform scales.
Batching and blending process control.
Technical Specifications
Brand
Allen-Bradley
Product Line
SLC 500
Module Type
Weigh Scale Module
Number of Channels
2
Backplane Current Draw
0.25 Amps (250 mA) @ 5V DC
Load Cell Excitation
5V DC
Load Cell Rating
350 Ohms
Accuracy
+/- 2%
Common-Mode Rejection
110 dB (at or below 60 Hz)
Conversion Rate
20 updates per second
Output Type
2 x TTL level digital outputs
Installation Guidelines
Ensure the SLC 500 rack power is disconnected before installing or removing the module.
Mount the module in a standard SLC 500 I/O chassis slot.
Use shielded twisted-pair cabling for load cell connections to minimize EMI interference.
Maintain proper grounding practices for the chassis to ensure signal integrity.
Verify that the load cell impedance matches the 350 Ohm specification for optimal performance.
Ensure adequate ventilation within the enclosure to maintain operating temperature limits.
FAQWhat is the primary function of the 1746-WS module?The 1746-WS is designed to interface directly with strain gauge load cells, converting raw millivolt signals into digital weight data for processing by an Allen-Bradley SLC 500 controller.How many load cells can this module support?The module is capable of supporting up to eight (8) full Wheatstone bridge, 350 Ohm load sensors on a single vessel.Does this module require external transmitters?No, the 1746-WS acts as a direct interface, which eliminates the need for additional external weight transmitters in the signal path.
نحن نقدم خدمة التوصيل في اليوم التالي من الاثنين إلى الجمعة إذا كان المنتج موجودًا في المخزون والاستثناءات في أيام العطلات.
عطلات نهاية الأسبوع
نحن لا نقدم أي تسليمات في عطلة نهاية الأسبوع.
دولي
نوفر خدمة التوصيل في اليوم التالي، حسب موقعك. تحقق من حالة طلبك عبر هذا الرابط.
DescriptionThe Allen-Bradley 1746-P7 is a specialized DC-input power supply module designed for use with the SLC 500 controller platform. This module is engineered to provide reliable, regulated power to the SLC backplane, supporting the processor and associated I/O modules in environments where standard AC power is not available or practical. It is particularly well-suited for applications involving remote telemetry units (RTUs), automotive testing rigs, and battery-backed industrial control systems.Features
Designed specifically for the Allen-Bradley SLC 500 chassis.
Accepts a flexible input voltage range of 10–30V DC.
Output capacity scales based on the input voltage (12V or 24V DC).
Provides stable, regulated power to the backplane to ensure consistent controller operation.
Compact, modular design for easy integration into existing 1746 chassis configurations.
ApplicationsThe 1746-P7 is ideal for mobile or remote industrial installations, including:
Remote Telemetry Units (RTUs) operating on battery or solar power.
Automotive and vehicle-based testing and data acquisition rigs.
Emergency backup systems where DC power is the primary or secondary source.
Industrial control applications requiring isolation from AC power fluctuations.
Technical Specifications
Brand
Allen-Bradley
Product Line
SLC 500
Module Type
DC System Power Supply
Input Voltage Range
10–30V DC
Nominal Input Voltage
12V / 24V DC
Inrush Current
20.0 Amps (minimum)
Line Power Requirement
50VA (at 12V) / 75VA (at 24V)
Max Real Input Power
50 Watts (at 12V) / 75 Watts (at 24V)
Fuse Protection
1746-F1 or equivalent
Mounting Location
1746 Chassis (Far Left Slot)
Installation Guidelines
The 1746-P7 must be installed in the far-left slot of the 1746 chassis.
Ensure all power is disconnected from the chassis and the DC source before installing or removing the module.
Verify that the DC input source is within the specified 10–30V DC range before applying power.
Ensure proper grounding of the chassis to minimize EMI and protect against electrical surges.
Maintain adequate clearance around the module to allow for proper ventilation and heat dissipation.
Use appropriate wire gauges for DC input connections to minimize voltage drop.
FAQDoes the 1746-P7 work with AC power?No, the 1746-P7 is strictly a DC-input power supply. It is designed to convert 12V or 24V DC input into the regulated power required by the SLC 500 backplane.Can I use this module in any slot of the chassis?No, the 1746-P7 is designed to occupy the far-left slot of the 1746 chassis, which is the dedicated power supply slot for the SLC 500 system.How does the input voltage affect performance?The output capacity of the module is dependent on the input voltage. Operating at 24V DC provides higher efficiency and greater power capacity compared to operating at 12V DC.
نحن نقدم خدمة التوصيل في اليوم التالي من الاثنين إلى الجمعة إذا كان المنتج موجودًا في المخزون والاستثناءات في أيام العطلات.
عطلات نهاية الأسبوع
نحن لا نقدم أي تسليمات في عطلة نهاية الأسبوع.
دولي
نوفر خدمة التوصيل في اليوم التالي، حسب موقعك. تحقق من حالة طلبك عبر هذا الرابط.
DescriptionThe Allen-Bradley 1746-OVP16 is a high-density discrete output module designed for the SLC 500 programmable controller platform. This module is specifically engineered for high-current applications requiring a sinking configuration, providing 16 output points that act as the ground side of the circuit for 24V DC field devices. The 'P' designation signifies enhanced power handling capabilities and integrated protection features, ensuring reliable operation in demanding industrial environments.Features
16 sinking output points for 24V DC field devices.
High-current output capability for robust industrial switching.
Integrated fuse protection for circuitry safety.
Blown fuse LED indicator on the front panel for rapid diagnostic troubleshooting.
Removable Terminal Blocks (RTBs) for simplified wiring and efficient module replacement without disturbing field connections.
ApplicationsThis module is intended for use in SLC 500 chassis-based systems. It is commonly deployed in manufacturing and process control environments for driving high-current DC loads such as solenoids, relays, and contactors where sinking output logic is required.Technical Specifications
Brand
Allen-Bradley
Product Line
SLC 500
Module Type
High-Current Digital DC Output (Sinking)
Number of Outputs
16 (16 points per common)
Operating Voltage Range
20.4 to 26.4V DC (Sink)
Backplane Current (5V DC)
250 mA
Backplane Current (24V DC)
0 mA
On-Signal Delay
0.1 ms (max resistive load)
Off-Signal Delay
1.0 ms (max resistive load)
On-State Voltage Drop
1.0V at 1.0A
Surge Current
4.0 Amps for 10 ms (per point)
Max Off-State Leakage
1.0 mA
Total Thermal Dissipation
6.26 Watts
Installation Guidelines
Ensure the SLC 500 chassis power is disconnected before installing or removing the module to prevent electrical arcing or damage.
Use the provided Removable Terminal Blocks (RTBs) for wiring; ensure wires are properly secured to prevent intermittent connections.
Maintain adequate clearance around the module to allow for proper ventilation and heat dissipation.
Follow standard ESD (Electrostatic Discharge) handling procedures when touching internal module components.
Route signal wiring away from high-voltage AC lines or high-EMI sources to minimize signal interference.
FAQDoes this module require external power for the outputs?Yes, the 1746-OVP16 requires an external 24V DC power source to drive the field devices connected to the sinking outputs.What does the 'P' in 1746-OVP16 stand for?The 'P' indicates that the module includes integrated protection features, specifically a fused common and a blown fuse indicator LED, which are not present on standard output modules.
نحن نقدم خدمة التوصيل في اليوم التالي من الاثنين إلى الجمعة إذا كان المنتج موجودًا في المخزون والاستثناءات في أيام العطلات.
عطلات نهاية الأسبوع
نحن لا نقدم أي تسليمات في عطلة نهاية الأسبوع.
دولي
نوفر خدمة التوصيل في اليوم التالي، حسب موقعك. تحقق من حالة طلبك عبر هذا الرابط.
DescriptionThe Allen-Bradley 1746-NR8 is an 8-point RTD/Resistance input module designed for use within the SLC 500 programmable controller system. This module provides high-precision temperature and resistance monitoring, allowing for the direct connection of RTD sensors or resistance-based devices to the PLC backplane. It is engineered to deliver reliable signal conditioning and conversion for industrial process control applications.Features
8-point input density for multi-channel temperature monitoring.
Compatible with standard SLC 500 I/O chassis configurations.
Supports a variety of RTD types and resistance ranges.
Low power consumption profile for efficient rack operation.
Integrated signal filtering for improved noise immunity in industrial environments.
ApplicationsThis module is typically utilized in process automation environments requiring precise temperature measurement, such as HVAC systems, chemical processing, food and beverage manufacturing, and thermal management systems within industrial machinery.Technical Specifications
Product Model
1746-NR8
Module Type
RTD/Resistance Input Module
Input Points
8
Backplane Current
100 mA @ 5V DC; 55 mA @ 24V DC
Power Consumption
1.82W maximum (0.5W @ 5V DC, 1.32W @ 24V DC)
Step Response
60 ms (in), 2.5 ms (out)
Operating Temperature
0 to 60 degC (32 to 140 degF)
Chassis Placement
Any slot except Slot 0
Installation Guidelines
Ensure the SLC 500 chassis power is disconnected before installing or removing the module.
The module can be installed in any available slot of the I/O chassis, with the exception of Slot 0.
Use appropriate shielded cabling for RTD inputs to minimize electromagnetic interference (EMI).
Ensure proper grounding of the chassis to maintain signal integrity and safety.
Handle the module using ESD-safe practices to prevent damage to internal circuitry.
Verify that the backplane power supply capacity is sufficient for the total load of all installed modules.
FAQWhat types of sensors can be connected to the 1746-NR8?The 1746-NR8 is designed to interface with RTD (Resistance Temperature Detector) sensors and resistive inputs. Refer to the specific Allen-Bradley user manual for the 1746-NR8 for the list of supported RTD types (e.g., Pt100, Ni100) and resistance ranges.Can this module be placed in any slot?No, the 1746-NR8 can be placed in any slot of the SLC 500 I/O chassis except for Slot 0, which is reserved for the processor.
نحن نقدم خدمة التوصيل في اليوم التالي من الاثنين إلى الجمعة إذا كان المنتج موجودًا في المخزون والاستثناءات في أيام العطلات.
عطلات نهاية الأسبوع
نحن لا نقدم أي تسليمات في عطلة نهاية الأسبوع.
دولي
نوفر خدمة التوصيل في اليوم التالي، حسب موقعك. تحقق من حالة طلبك عبر هذا الرابط.
DescriptionThe Allen-Bradley 1746-NI16V is a high-density analog input module engineered for the SLC 500 programmable controller platform. This module provides sixteen (16) single-ended voltage input channels, organized into four groups of four, allowing for efficient integration of various industrial sensors such as potentiometers, pressure transducers, and analytical instrumentation providing DC voltage outputs.Features
High-Density I/O: Provides 16 voltage-type analog inputs in a single-slot module.
Signal Conditioning: Employs Sigma-Delta conversion for high-resolution 16-bit digital representation of analog signals.
Programmable Filtering: Features a user-selectable low-pass digital filter with eight frequency settings (6 Hz to 250 Hz) to balance signal stability against step response time.
Flexible Input Ranges: Supports multiple standard DC voltage ranges including ±10V, 0–10V, 0–5V, and 1–5V.
Robust Isolation: Rated for 500V AC isolation for 1 second to protect against backplane noise and transients.
Technical Specifications
Parameter
Specification
Brand
Allen-Bradley
Product Line
SLC 500
Number of Inputs
16 (4 groups of 4)
Input Ranges
±10V DC, 0–10V DC, 0–5V DC, 1–5V DC
Resolution
16-bit
Conversion Type
Sigma-Delta
Backplane Current (5V)
125 mA
Backplane Current (24V)
75 mA
Bandwidth
6 Hz to 250 Hz
Step Response
9 ms to 630 ms (Programmable)
Operating Temperature
0 to 60 degC (32 to 140 degF)
Installation Guidelines
Power Down: Always remove power from the SLC 500 chassis before installing or removing the module to prevent electrical damage.
Slot Placement: The 1746-NI16V can be placed in any I/O slot of an SLC 500 chassis; however, ensure the power supply can accommodate the additional backplane current draw (125 mA at 5V, 75 mA at 24V).
Wiring: Use shielded twisted-pair cabling for analog signal connections to minimize EMI/RFI interference. Ground the shield at one end only to prevent ground loops.
Handling: Observe standard ESD precautions when handling the module to prevent damage to internal circuitry.
Environment: Ensure the module is installed in an enclosure rated for the operating environment, maintaining an ambient temperature between 0 and 60 degC.
FAQWhat is the primary function of the 1746-NI16V?This module is designed to convert analog voltage signals from field devices into digital values that can be processed by the SLC 500 controller, facilitating high-density data acquisition.Can I mix different voltage ranges on the same module?Yes, the module supports multiple ranges (±10V, 0–10V, 0–5V, 1–5V), and these can be configured on a per-channel basis via the programming software.How do I manage electrical noise on my analog signals?The module includes a programmable low-pass digital filter. You can select from eight different filter frequencies to effectively suppress noise based on your specific application requirements.
نحن نقدم خدمة التوصيل في اليوم التالي من الاثنين إلى الجمعة إذا كان المنتج موجودًا في المخزون والاستثناءات في أيام العطلات.
عطلات نهاية الأسبوع
نحن لا نقدم أي تسليمات في عطلة نهاية الأسبوع.
دولي
نوفر خدمة التوصيل في اليوم التالي، حسب موقعك. تحقق من حالة طلبك عبر هذا الرابط.
DescriptionThe Allen-Bradley 1746-IA8 is a high-density digital input module designed for use within the SLC 500 programmable controller system. This module provides 8 input channels, specifically engineered to interface with 100/120V AC field devices. It serves as a critical component for monitoring AC-powered sensors, limit switches, and pushbuttons, converting field-level AC signals into logic-level signals compatible with the SLC 500 processor.Features
8-channel digital input configuration.
Designed for 100/120V AC input voltage ranges.
Compatible with standard SLC 500 I/O chassis.
Optical isolation between field-side and logic-side circuitry to protect the controller from electrical noise and transients.
Status indicators for each channel to facilitate rapid troubleshooting and diagnostics.
Technical Specifications
Manufacturer
Allen-Bradley
Model
1746-IA8
Module Type
AC Input Module
Number of Inputs
8
Voltage Category
100/120V AC
Status
Discontinued (Manufacturer date: 2018-08-19)
Installation Guidelines
Ensure the SLC 500 chassis power is disconnected before installing or removing the module to prevent electrical shock or damage.
Align the module carefully with the chassis backplane connector and slide it into the desired slot until the locking tabs engage.
Use appropriate shielded cabling for input signals to minimize electromagnetic interference (EMI) in industrial environments.
Ensure all field wiring is properly terminated to the removable terminal block and that the terminal block is securely seated on the module.
Maintain adequate clearance around the module to ensure proper airflow and cooling within the control cabinet.
Follow standard ESD (Electrostatic Discharge) precautions when handling the module to protect internal components.
FAQIs the 1746-IA8 still supported by the manufacturer?The 1746-IA8 was officially discontinued by Allen-Bradley on August 19, 2018. While it is no longer in active production, it remains widely available through secondary market channels for maintenance and legacy system support.Can I use this module with any SLC 500 processor?Yes, the 1746-IA8 is designed to be compatible with standard SLC 500 I/O chassis and can be used with any SLC 500 processor that supports the 1746 I/O platform, provided the system power supply has sufficient capacity for the module's current draw.
DescriptionThe Allen-Bradley 1746-IB8 is a high-performance digital DC input module designed for use within the SLC 500 programmable logic controller system. This module provides eight (8) current-sinking input channels, allowing the PLC to monitor the status of various field devices such as limit switches, pushbuttons, and proximity sensors. It reliably converts 24V DC field signals into logic-level data for processing by the SLC 500 controller.Features
Eight (8) isolated current-sinking input channels.
Nominal operating voltage of 24V DC with an operating range of 10-30V DC.
Integrated hardware filtering with an 8 ms signal delay to mitigate mechanical contact bounce.
Robust design offering high noise immunity and resistance to shock up to 30G.
Backplane power consumption of 50 mA at 5V DC.
1500V AC isolation between the backplane and the input circuitry.
ApplicationsThe 1746-IB8 is widely utilized in industrial automation environments for discrete signal monitoring. It is commonly deployed in manufacturing lines, material handling systems, and process control applications where reliable detection of binary field device states is required.Technical Specifications
Brand
Allen-Bradley
Product Line
SLC 500
Module Type
Digital DC Input Module
Number of Inputs
8 (Current Sinking)
Nominal Input Voltage
24V DC
Operating Voltage Range
10–30V DC
Off-State Voltage (Max)
5.0V DC
Off-State Current (Max)
1 mA
Nominal Input Current
8 mA @ 24V DC
Backplane Current (5V DC)
50 mA
Power Dissipation
1.3 Watts Total
Isolation
1500V AC
Operating Temperature
0 to 60 degC
Installation Guidelines
Ensure the PLC chassis is powered down before inserting or removing the module to prevent electrical damage.
The 1746-IB8 must be installed in an SLC 500 chassis; ensure the module is fully seated and the retaining screws are tightened to provide a secure ground connection.
Use shielded cabling for input signals to minimize electromagnetic interference (EMI) in high-noise environments.
Maintain proper ventilation within the enclosure to ensure the ambient temperature remains within the 0 to 60 degC operating range.
Verify that field devices are correctly wired for a sinking configuration, where the device sources current to the module input.
FAQWhat is the primary function of the 1746-IB8 module?The 1746-IB8 is a digital input module that detects 24V DC signals from field sensors and switches, converting them into digital signals that the SLC 500 processor can interpret.Does this module require external power for the inputs?Yes, the 1746-IB8 requires an external 24V DC power supply to energize the input field devices, as the module itself does not provide power to the sensors.
نحن نقدم خدمة التوصيل في اليوم التالي من الاثنين إلى الجمعة إذا كان المنتج موجودًا في المخزون والاستثناءات في أيام العطلات.
عطلات نهاية الأسبوع
نحن لا نقدم أي تسليمات في عطلة نهاية الأسبوع.
دولي
نوفر خدمة التوصيل في اليوم التالي، حسب موقعك. تحقق من حالة طلبك عبر هذا الرابط.
DescriptionThe Allen-Bradley 1746-BLM is a high-performance, intelligent specialty module engineered for the plastics industry, specifically for use within the SLC 500 control system. It provides a tightly integrated solution for controlling blow molding machinery, including continuous extrusion, accumulator head, and reciprocating screw machines. The module functions as a co-processor, performing complex parison profile control and servo-loop tasks independently of the SLC 500 processor's scan time, ensuring high-speed, deterministic performance.Features
Four independent axes of PID control, typically configured for parison and accumulator push-out applications.
High-speed loop update time of 100 microseconds for precise motion control.
256 points of profile resolution with interpolation for smooth wall thickness transitions.
Dynamic profile adjustment capabilities, allowing for part weight changes without altering the established parison profile shape.
Integrated 14-bit resolution analog I/O and digital I/O for comprehensive machine interface.
ApplicationsThis module is designed for demanding plastic processing environments, including:
Continuous extrusion blow molding machines.
Accumulator head blow molding systems.
Reciprocating screw blow molding machinery.
Applications requiring high-speed, synchronized parison profile control.
Technical Specifications
Brand
Allen-Bradley
Product Line
SLC 500
Module Type
Blow Molding Specialty Module
Axes
4 Independent
Analog I/O
4 Inputs / 4 Outputs (14-bit)
Digital I/O
4 Inputs / 4 Outputs
Loop Update Time
100 µs
Backplane Current (5V DC)
110 mA
Backplane Current (24V DC)
85 mA
Isolation Voltage
500V DC
Operating Temperature
0 to 60 degC (32 to 140 degF)
Installation Guidelines
Ensure the SLC 500 rack is powered down before inserting or removing the 1746-BLM module to prevent electrical damage.
Install the module in an appropriate slot within the SLC 500 chassis, ensuring it is fully seated and the retaining screws are tightened.
Follow standard industrial grounding practices for the chassis and I/O wiring to minimize EMI.
Use shielded cables for analog signal connections to maintain signal integrity and prevent noise interference.
Maintain adequate ventilation within the control cabinet to ensure the module operates within its specified temperature range of 0 to 60 degC.
FAQWhat is the primary function of the 1746-BLM?The 1746-BLM acts as a dedicated co-processor for the SLC 500 system, offloading complex parison profile control and servo-loop tasks from the main CPU to provide high-speed, independent control of blow molding machinery.Can I adjust the part weight while the machine is running?Yes, the module allows operators to dynamically adjust profile parameters, such as overall part weight, without the need to alter the established shape of the parison profile.
نحن نقدم خدمة التوصيل في اليوم التالي من الاثنين إلى الجمعة إذا كان المنتج موجودًا في المخزون والاستثناءات في أيام العطلات.
عطلات نهاية الأسبوع
نحن لا نقدم أي تسليمات في عطلة نهاية الأسبوع.
دولي
نوفر خدمة التوصيل في اليوم التالي، حسب موقعك. تحقق من حالة طلبك عبر هذا الرابط.
DescriptionThe Allen-Bradley 1746-INT4 is an isolated thermocouple and millivolt analog input module designed for the SLC 500 programmable controller platform. This module provides high-precision temperature and voltage sensing capabilities, allowing for direct connection of various thermocouple types and low-level millivolt signals in industrial control environments. As an isolated module, it provides enhanced noise immunity and protection against ground loops, ensuring signal integrity in demanding applications.Features
Four isolated input channels for thermocouple or millivolt signals.
Supports input ranges of -50 to +50 mVDC and -100 to +100 mVDC.
Designed for seamless integration with the Allen-Bradley SLC 500 chassis.
Provides galvanic isolation to reduce electrical interference and improve measurement accuracy.
Low power consumption: 110 mA at 5 VDC and 85 mA at 24 VDC.
ApplicationsThe 1746-INT4 is typically utilized in process control applications requiring temperature monitoring, such as furnace control, heat treatment processes, chemical processing, and general industrial automation where thermocouple feedback is essential for PID loops or data logging.Technical Specifications
Product Model
1746-INT4
Module Type
Isolated Thermocouple/Millivolt Input
Input Ranges
-50 to +50 mVDC, -100 to +100 mVDC
Backplane Current Draw
110 mA @ 5 VDC; 85 mA @ 24 VDC
Compatible Series
SLC 500
Manufacturer
Allen-Bradley
Installation Guidelines
Ensure the SLC 500 chassis power is disconnected before installing or removing the module.
Slide the module into an available slot in the SLC 500 chassis and secure it using the integrated locking tabs.
Use shielded twisted-pair cabling for all input signals to minimize electromagnetic interference (EMI).
Ensure proper grounding of the cable shields at the signal source or the cabinet ground bus, following standard industrial practices.
Maintain adequate clearance around the module to allow for proper ventilation and heat dissipation within the control cabinet.
Handle the module using ESD-safe practices to prevent damage to sensitive internal components.
FAQIs the 1746-INT4 still in production?No, the 1746-INT4 has been discontinued by the manufacturer. We provide high-quality surplus units to support legacy systems.What are the compatible spare models for this unit?The 1746-INT4 is often interchangeable with later revisions such as the 1746-INT4/B or 1746-INT4/C, depending on your specific system firmware and configuration requirements.
نحن نقدم خدمة التوصيل في اليوم التالي من الاثنين إلى الجمعة إذا كان المنتج موجودًا في المخزون والاستثناءات في أيام العطلات.
عطلات نهاية الأسبوع
نحن لا نقدم أي تسليمات في عطلة نهاية الأسبوع.
دولي
نوفر خدمة التوصيل في اليوم التالي، حسب موقعك. تحقق من حالة طلبك عبر هذا الرابط.
DescriptionThe Allen-Bradley 1746-FIO4I is a high-speed analog combination I/O module engineered for the SLC 500 programmable controller platform. Designed for applications requiring rapid signal processing, this module provides two analog input channels and two analog output channels in a single-slot configuration. The module utilizes successive approximation conversion to achieve high-speed performance, making it suitable for control loops that demand faster response times than standard analog modules can provide.Features
High-Speed Conversion: Utilizes successive approximation for a 7.5 microsecond conversion time.
I/O Configuration: Two configurable voltage/current inputs and two dedicated current output channels.
High Bandwidth: Features a 7 kHz bandwidth for rapid signal tracking.
Resolution: Provides 12-bit resolution for inputs and 14-bit resolution for outputs.
Compatibility: Fully compatible with both fixed and modular SLC 500 chassis systems.
Technical Specifications
Brand
Allen-Bradley
Product Line
SLC 500
Module Type
Fast Analog Combination I/O
Input Channels
2 (Voltage or Current)
Output Channels
2 (Current: 0–20 mA)
Input Ranges
0 to 10V DC or 0 to 20 mA
Conversion Method
Successive Approximation
Input Resolution
12-bit
Output Resolution
14-bit
Conversion Time
7.5 µs
Update Time
512 µs
Backplane Current (5V)
55 mA
Backplane Current (24V)
150 mA
Operating Temperature
0 to 60 degC (32 to 140 degF)
Installation Guidelines
Power Down: Always remove power from the SLC 500 chassis before inserting or removing the module to prevent electrical damage.
Slot Placement: The module can be installed in any available I/O slot of a modular SLC 500 chassis.
Wiring: Use shielded twisted-pair cabling for analog signals to minimize electromagnetic interference (EMI). Ensure the shield is grounded at one end only.
Handling: Observe standard ESD (Electrostatic Discharge) precautions when handling the module.
Cooling: Ensure adequate ventilation within the enclosure to maintain the operating temperature within the specified 0 to 60 degC range.
FAQWhat is the primary advantage of the 1746-FIO4I over standard analog modules?The 1746-FIO4I is designed for high-speed applications. Unlike standard modules that typically use Sigma-Delta conversion, this module uses a successive approximation method, resulting in a significantly faster 7.5 microsecond conversion time and a 7 kHz bandwidth.Is this module compatible with all SLC 500 systems?Yes, the 1746-FIO4I is compatible with both fixed and modular SLC 500 hardware platforms.
نحن نقدم خدمة التوصيل في اليوم التالي من الاثنين إلى الجمعة إذا كان المنتج موجودًا في المخزون والاستثناءات في أيام العطلات.
عطلات نهاية الأسبوع
نحن لا نقدم أي تسليمات في عطلة نهاية الأسبوع.
دولي
نوفر خدمة التوصيل في اليوم التالي، حسب موقعك. تحقق من حالة طلبك عبر هذا الرابط.
DescriptionThe Allen-Bradley 1746-P4 is a high-capacity power supply module designed for use with the SLC 500 programmable controller system. It provides the necessary DC power to the controller backplane, supporting complex configurations that require higher current capacity for I/O modules and processor operations. This unit is engineered to maintain stable system performance in industrial environments by converting standard AC line voltage into regulated DC power.Features
Designed specifically for the SLC 500 chassis-based system.
High current capacity: 10.0 A at 5V DC and 2.88 A at 24V DC.
Wide input voltage range: 120 to 220V AC.
Integrated CPU hold-up time of 20 ms at full load to ensure stability during brief power fluctuations.
Robust design for reliable operation in demanding industrial control applications.
Technical Specifications
Product Model
1746-P4
Input Voltage
120 to 220V AC
Input Power
92 Watts
Typical Line Power Requirement
180VA
Inrush Current
45 Amps
Output Capacity (5V DC)
10.0 Amps
Output Capacity (24V DC)
2.88 Amps
Backplane Current (5V)
10 Amps
Backplane Current (24V)
0.46 Amps
CPU Hold-up Time
20 ms (full load) / 3000 ms (no load)
Installation Guidelines
Ensure the power supply is installed in the leftmost slot of the SLC 500 chassis.
Always disconnect main power before installing or removing the module to prevent electrical shock or damage to the backplane.
Ensure adequate ventilation around the chassis to maintain operating temperatures within specified limits.
Verify that the input voltage matches the module specifications before applying power.
Use appropriate grounding practices to minimize electrical noise and ensure system safety.
FAQWhat is the primary function of the 1746-P4?The 1746-P4 serves as a power supply module for the Allen-Bradley SLC 500 system, converting AC input power into the DC voltages required by the processor and I/O modules installed in the chassis.Can this module be used in any slot?No, the 1746-P4 power supply is designed to be mounted in the dedicated power supply slot on the far left side of the SLC 500 chassis.
نحن نقدم خدمة التوصيل في اليوم التالي من الاثنين إلى الجمعة إذا كان المنتج موجودًا في المخزون والاستثناءات في أيام العطلات.
عطلات نهاية الأسبوع
نحن لا نقدم أي تسليمات في عطلة نهاية الأسبوع.
دولي
نوفر خدمة التوصيل في اليوم التالي، حسب موقعك. تحقق من حالة طلبك عبر هذا الرابط.
DescriptionThe Allen-Bradley 1769-PB4 is a dedicated power supply module designed for the CompactLogix system. It provides the necessary DC power to support the operation of CompactLogix I/O modules and controllers within a local expansion bank. This unit is engineered to convert a 24V DC input into the regulated power required for the backplane, ensuring stable performance for industrial automation control tasks.Features
Designed specifically for CompactLogix system backplane power distribution.
Wide input voltage range of 19.2 to 31.2 VDC.
Robust power dissipation rating of 14.5 W at 60 degC.
Compact form factor for efficient panel space utilization.
Reliable operation in demanding industrial environments.
Technical Specifications
Product Model
1769-PB4
Input Voltage Range
19.2 - 31.2 VDC
Nominal Input Voltage
24 VDC
Power Consumption
100 VA @ 24 VDC
Power Dissipation
14.5 W @ 60 degC
Product Line
CompactLogix
Manufacturer
Allen-Bradley
Installation Guidelines
Ensure the system power is disconnected before installing or removing the power supply module.
Mount the module securely to the DIN rail or panel as per the CompactLogix system configuration.
Maintain adequate clearance around the module to allow for proper heat dissipation and airflow.
Use appropriate shielded cabling for DC input connections to minimize electromagnetic interference (EMI).
Verify that the input voltage source is within the specified 19.2-31.2 VDC range before energizing.
Handle the module using standard ESD (Electrostatic Discharge) protection practices to prevent damage to internal components.
FAQWhat is the primary function of the 1769-PB4?The 1769-PB4 is a power supply module used to provide 24V DC power to the CompactLogix backplane, enabling the operation of connected I/O modules.Can this power supply be used in high-temperature environments?The module is rated for operation with a power dissipation of 14.5 W at 60 degC (140 degF). Always ensure the enclosure ventilation is sufficient to keep the ambient temperature within the manufacturer's specified limits.
نحن نقدم خدمة التوصيل في اليوم التالي من الاثنين إلى الجمعة إذا كان المنتج موجودًا في المخزون والاستثناءات في أيام العطلات.
عطلات نهاية الأسبوع
نحن لا نقدم أي تسليمات في عطلة نهاية الأسبوع.
دولي
نوفر خدمة التوصيل في اليوم التالي، حسب موقعك. تحقق من حالة طلبك عبر هذا الرابط.
DescriptionThe Allen-Bradley 1769-L36ERM is a high-performance CompactLogix controller designed for demanding motion control applications. As part of the CompactLogix 5370 series, this processor provides 3 MB of user memory and supports up to 16 axes of integrated motion via EtherNet/IP. It is engineered to provide seamless integration between logic and motion, making it an ideal solution for machine automation requiring precise synchronization and high-speed communication.Features
3 MB memory capacity for complex control algorithms and motion profiles.
Integrated dual Ethernet ports supporting EtherNet/IP for device-level ring (DLR) or linear topologies.
Supports up to 16 CIP Motion axes for scalable motion control.
Integrated USB port for local programming and firmware updates.
SD card slot for non-volatile memory storage and data logging.
Compact, modular design suitable for DIN-rail or panel mounting.
ApplicationsThis controller is widely utilized in industrial automation environments, including packaging machinery, material handling systems, assembly lines, and general motion-centric manufacturing processes where high-speed synchronization and reliable Ethernet connectivity are required.Technical Specifications
Product Model
1769-L36ERM
Memory
3 MB
Communication Ports
2 x Ethernet I/P, 1 x USB
Motion Capability
Up to 16 Axes (CIP Motion)
Operating Temperature
0 to 60 degC (32 to 140 degF)
Shock Rating
20 G (operating)
Mounting
DIN-rail or Panel
Installation Guidelines
Ensure the controller is mounted in an enclosure that provides adequate protection against environmental contaminants.
Maintain proper clearance around the module to allow for adequate airflow and cooling.
Use shielded Ethernet cabling for all EtherNet/IP connections to minimize electromagnetic interference (EMI).
Ground the controller according to local electrical codes and Allen-Bradley installation manuals to prevent noise-related issues.
Always power down the system before installing or removing the module from the chassis or DIN rail.
Handle the module with care to avoid electrostatic discharge (ESD) damage to internal components.
FAQWhat is the primary difference between the 1769-L36ERM and standard CompactLogix controllers?The 1769-L36ERM is specifically optimized for motion control, featuring hardware support for CIP Motion, which allows it to control up to 16 axes of motion over an EtherNet/IP network, whereas standard controllers may lack dedicated motion processing capabilities.Can this module be used with standard 1769 I/O?Yes, the 1769-L36ERM is designed to interface with the 1769 Compact I/O system, allowing for flexible and scalable I/O configurations.
نحن نقدم خدمة التوصيل في اليوم التالي من الاثنين إلى الجمعة إذا كان المنتج موجودًا في المخزون والاستثناءات في أيام العطلات.
عطلات نهاية الأسبوع
نحن لا نقدم أي تسليمات في عطلة نهاية الأسبوع.
دولي
نوفر خدمة التوصيل في اليوم التالي، حسب موقعك. تحقق من حالة طلبك عبر هذا الرابط.
DescriptionThe Allen-Bradley 2711-NV3K is a specialized antiglare overlay designed for integration with PanelView 900 keypad operator terminals. This accessory is engineered to mitigate ambient light reflections and screen glare, which are common challenges in industrial environments. By improving display contrast and readability, the overlay assists in maintaining clear visual monitoring and helps reduce operator eye strain during extended shifts.Features
Precision-engineered for exact fitment on PanelView 900 keypad terminal displays.
Reduces glare and reflections from overhead lighting or external light sources.
Acts as a durable protective barrier against dust, surface scratches, and minor abrasions.
Maintains high optical clarity and touch-sensitive responsiveness for the underlying interface.
Simple installation process designed for standard industrial maintenance procedures.
Technical Specifications
Model
2711-NV3K
Brand
Allen-Bradley / Rockwell Automation
Accessory Type
Antiglare Overlay
Compatibility
PanelView 900 Keypad Terminals
Operating Temperature
0 to 50 deg C
Weight
0.05 kg
Installation GuidelinesEnsure the PanelView 900 terminal display surface is completely clean and free of debris, oils, or fingerprints before application. Use a lint-free cloth and an appropriate screen-cleaning solution if necessary. Carefully align the 2711-NV3K overlay with the terminal edges to ensure proper coverage. Apply pressure evenly from the center outward to prevent air bubbles and ensure a secure, long-term bond with the display surface.FAQIs this overlay compatible with PanelView 900 touch-only models? No, this specific part number is designed exclusively for the keypad-equipped version of the PanelView 900 terminal.Does this overlay affect the tactile response of the keypad? The 2711-NV3K is designed to be thin and durable, ensuring that it does not interfere with the tactile feedback or the operation of the terminal's keys.
نحن نقدم خدمة التوصيل في اليوم التالي من الاثنين إلى الجمعة إذا كان المنتج موجودًا في المخزون والاستثناءات في أيام العطلات.
عطلات نهاية الأسبوع
نحن لا نقدم أي تسليمات في عطلة نهاية الأسبوع.
دولي
نوفر خدمة التوصيل في اليوم التالي، حسب موقعك. تحقق من حالة طلبك عبر هذا الرابط.
DescriptionThe Allen-Bradley 1771-P7 is a high-performance power supply module designed specifically for the PLC-5 programmable controller system. This unit provides reliable power distribution to the I/O chassis, ensuring consistent operation of connected modules within the industrial control environment. It is engineered to handle standard industrial AC input voltages and convert them into the stable DC power required by the PLC-5 backplane.Features
Designed for integration with Allen-Bradley PLC-5 I/O chassis.
Supports 120/220 VAC input voltage ranges.
Provides stable 5 VDC output for system backplane operations.
Operates at standard 50/60 Hz line frequencies.
Robust 16 Amp capacity to support demanding I/O configurations.
Compatible with various hardware revisions including 1771-P7/A, /B, /C, and /D.
Technical Specifications
Manufacturer
Allen-Bradley
Model
1771-P7
Input Voltage
120/220 VAC
Output Voltage
5 VDC
Current Rating
16 Amp
Frequency
50/60 Hz
System Compatibility
PLC-5
Weight
1.6 kg
Installation Guidelines
Ensure the main power source is disconnected before installing or removing the power supply module from the chassis.
Verify that the input voltage selector switch (if applicable) is set to match your facility's power supply (120V or 220V).
Ensure proper seating of the module within the I/O rack to maintain secure electrical contact with the backplane.
Maintain adequate clearance around the module to allow for proper ventilation and heat dissipation.
Follow standard ESD (Electrostatic Discharge) prevention procedures when handling the module to prevent damage to internal circuitry.
Check all wiring connections for tightness and proper insulation before applying power.
FAQQ: Is the 1771-P7 compatible with all PLC-5 chassis?A: The 1771-P7 is designed for standard PLC-5 I/O chassis. Please verify your specific chassis power requirements and slot configuration before installation.Q: What should I do if the power supply status indicator does not light up?A: First, verify that the input AC power is within the specified range and that the power source is active. Check the module seating in the chassis and ensure there are no short circuits on the 5 VDC backplane output.
نحن نقدم خدمة التوصيل في اليوم التالي من الاثنين إلى الجمعة إذا كان المنتج موجودًا في المخزون والاستثناءات في أيام العطلات.
عطلات نهاية الأسبوع
نحن لا نقدم أي تسليمات في عطلة نهاية الأسبوع.
دولي
نوفر خدمة التوصيل في اليوم التالي، حسب موقعك. تحقق من حالة طلبك عبر هذا الرابط.
The Allen-Bradley 1794-IE12 is a high-density analog input module designed for the FLEX I/O distributed I/O system. It provides 12 single-ended input channels capable of processing voltage or current signals, making it an ideal solution for monitoring process variables such as pressure, flow, and temperature in industrial control environments.Features
High-density 12-channel configuration for space-efficient cabinet design.
Supports both current (0-20 mA, 4-20 mA) and voltage (+/- 10V) input ranges.
16-bit resolution for high-precision signal conversion.
Supports Removal and Insertion Under Power (RIUP), allowing for maintenance without shutting down the entire system.
Configurable digital filtering to minimize signal noise.
Robust isolation between field-side signals and the system backplane.
Applications
Packaging and bottling line flow and temperature monitoring.
Assembly automation systems requiring torque or vibration data acquisition.
Fluid handling and chemical dosing systems for pH and flow control.
Remote wellhead pressure and flow monitoring in oil and gas applications.
Large-scale industrial HVAC climate control systems.
Technical Specifications
Model
1794-IE12
Number of Inputs
12 single-ended
Input Resolution
16 bits
Voltage Terminal Resolution
320 uV/cnt
Current Terminal Resolution
0.641 uA/cnt
Input Conversion Rate
8.0 ms (all channels)
Max Voltage Overload
30V continuous
Input Ranges
+/- 10V, 0-20 mA, 4-20 mA
Enclosure Rating
IP20
Installation Guidelines
Keyswitch Setting: Before installing the module, set the mechanical keyswitch on the 1794-TB3G or 1794-TB3GS terminal base to position 3 to ensure compatibility with the 1794-IE12.
Mounting: Align the module's alignment bar with the groove on the terminal base and press down firmly until the latching mechanism engages.
FLEXBus Connection: Ensure the FLEXBus connector is fully seated to the left to establish a reliable connection with the adjacent adapter or terminal base.
Handling: Always handle the module with care to avoid bending the pins on the bottom connector. Ensure the system is free of debris before insertion.
FAQWhat is the primary function of the 1794-IE12?The 1794-IE12 is an analog input module that converts real-world analog signals into digital data for use by a PLC or PAC within the FLEX I/O platform.Does this module support hot-swapping?Yes, the 1794-IE12 supports Removal and Insertion Under Power (RIUP), which allows for module replacement while the system remains powered.Are the channels independently configurable?No, the channels on the 1794-IE12 are configured in pairs (e.g., 0 and 1, 2 and 3) rather than individually.
نحن نقدم خدمة التوصيل في اليوم التالي من الاثنين إلى الجمعة إذا كان المنتج موجودًا في المخزون والاستثناءات في أيام العطلات.
عطلات نهاية الأسبوع
نحن لا نقدم أي تسليمات في عطلة نهاية الأسبوع.
دولي
نوفر خدمة التوصيل في اليوم التالي، حسب موقعك. تحقق من حالة طلبك عبر هذا الرابط.
The Allen-Bradley 2711-K6C9L1 is a PanelView 600 series operator terminal engineered for robust human-machine interface (HMI) applications in industrial environments. This unit facilitates essential process visualization, system monitoring, and operator control, supporting increased productivity and streamlined diagnostics in manufacturing, material handling, and packaging automation tasks.Features
5.7-inch color display with 320 x 234 pixel resolution for clear process data visualization.
Integrated physical keypad assembly providing reliable tactile input for operator control.
RS-232 communication port supporting DH-485 protocol for integration with compatible PLC systems.
Dedicated printer port for hard-copy alarm reporting and event documentation.
Designed for 24 VDC power input, suitable for standard industrial control cabinets.
Ruggedized enclosure ratings including NEMA 12/13, 4X, and IP54/IP65 for protection against dust and moisture.
ApplicationsThis operator interface is widely utilized in discrete manufacturing, packaging lines, and material handling systems where real-time monitoring and direct operator interaction with the control system are required.Technical Specifications
Model
2711-K6C9L1
Display Size
5.7 inches
Display Type
Color
Resolution
320 x 234 pixels
Input Voltage
24 VDC
Communication
RS-232 (DH-485), Printer Port
Enclosure Rating
NEMA 12/13, 4X, IP54, IP65
Operating Temperature
0 to 50 degC
Installation Guidelines
Ensure the panel cutout is prepared to the manufacturer's specified dimensions to maintain the integrity of the NEMA/IP seal.
Verify that the 24 VDC power supply is stable and properly grounded before connecting to the terminal.
Use shielded communication cables for the RS-232 connection to minimize electromagnetic interference (EMI) in high-noise industrial environments.
Maintain adequate clearance around the unit to allow for proper ventilation and heat dissipation.
Always disconnect power before performing any wiring or maintenance on the operator terminal.
FAQWhat communication protocol does the 2711-K6C9L1 support?This model features an RS-232 port that supports the DH-485 communication protocol for data exchange with Allen-Bradley controllers.Is this unit suitable for washdown environments?Yes, the unit carries NEMA 4X and IP65 ratings, indicating it is designed to withstand dust, dirt, and water spray, making it suitable for many demanding industrial settings.
