تُقدّم ألين-برادلي، التابعة لشركة روكويل أوتوميشن، مجموعةً واسعةً من منتجات الأتمتة الصناعية. بدءًا من وحدات التحكم المنطقية القابلة للبرمجة (PLCs) ولوحات واجهة الإنسان والآلة (HMIs)، وصولًا إلى وحدات ووحدات التحكم في الإدخال/الإخراج (I/O)، تضمن حلول ألين-برادلي تحكمًا صناعيًا موثوقًا وفعالًا وقابلًا للتطوير في المصانع حول العالم.
نحن نقدم خدمة التوصيل في اليوم التالي من الاثنين إلى الجمعة إذا كان المنتج موجودًا في المخزون والاستثناءات في أيام العطلات.
عطلات نهاية الأسبوع
نحن لا نقدم أي تسليمات في عطلة نهاية الأسبوع.
دولي
نوفر خدمة التوصيل في اليوم التالي، حسب موقعك. تحقق من حالة طلبك عبر هذا الرابط.
DescriptionThe Allen-Bradley 1762-OF4 is a high-performance analog output module designed for use with the MicroLogix 1200 programmable logic controller (PLC) system. This module provides four single-ended analog output channels, allowing for precise control of external devices such as variable frequency drives, actuators, or proportional valves. It supports both voltage and current output modes, providing versatility for various industrial automation applications.Features
Four (4) single-ended analog output channels.
Configurable output ranges: 0 to 10 VDC or 4 to 20 mA.
Full-scale analog ranges up to 10.5 VDC and 21 mA.
Designed for seamless integration with the MicroLogix 1200 expansion I/O bus.
Requires 24 VDC input power for operation.
ApplicationsThis module is typically utilized in industrial control environments requiring analog signal generation for process regulation. Common applications include speed control for motor drives, positioning for hydraulic or pneumatic valves, and signal transmission to remote instrumentation or chart recorders within a MicroLogix-based control architecture.Technical Specifications
Model
1762-OF4
Number of Outputs
4 Single-ended
Output Range (Voltage)
0 to 10 VDC
Output Range (Current)
0 to 20 mA / 4 to 20 mA
Full Scale Range
10.5 VDC / 21 mA
Input Power
24 VDC
Series
MicroLogix 1200
Installation Guidelines
Ensure the PLC system power is disconnected before installing or removing the 1762-OF4 module to prevent electrical damage.
Mount the module securely to the MicroLogix 1200 expansion bus using the provided connector interface.
Use shielded twisted-pair cabling for analog signals to minimize electromagnetic interference (EMI).
Ensure proper grounding of the cable shields at one end to prevent ground loops.
Maintain adequate clearance around the module to ensure proper ventilation and prevent overheating.
Handle the module using ESD-safe practices to protect internal circuitry from electrostatic discharge.
FAQWhat output ranges does the 1762-OF4 support?The module supports 0-10 VDC voltage output and 0-20 mA or 4-20 mA current output, with full-scale capabilities up to 10.5 VDC and 21 mA.Is this module compatible with other MicroLogix series?The 1762-OF4 is specifically designed for the MicroLogix 1200 series expansion I/O bus. Please consult your specific controller hardware manual to verify compatibility with other MicroLogix models.
نحن نقدم خدمة التوصيل في اليوم التالي من الاثنين إلى الجمعة إذا كان المنتج موجودًا في المخزون والاستثناءات في أيام العطلات.
عطلات نهاية الأسبوع
نحن لا نقدم أي تسليمات في عطلة نهاية الأسبوع.
دولي
نوفر خدمة التوصيل في اليوم التالي، حسب موقعك. تحقق من حالة طلبك عبر هذا الرابط.
DescriptionThe Allen-Bradley 1336T-MCB-SP1B is a main control printed circuit board (PCB) designed for use within the 1336T series of industrial AC drives. This control board serves as the central processing unit for the drive, managing motor control algorithms, communication interfaces, and diagnostic monitoring. It is a critical component for maintaining the operational integrity and performance of the drive system.Features
Core control logic for 1336T series AC drives
Integrated processing for motor regulation and speed control
Compatible with spare model references 74101-774-51 and 74101-772-51
Robust design for industrial drive cabinet environments
Technical Specifications
Product Model
1336T-MCB-SP1B
Component Type
Main Control PC Board
Spare Model References
74101-774-51 / 74101-772-51
Manufacturer
Allen-Bradley
Weight
0.32 kg
Installation Guidelines
Ensure all power is disconnected from the drive unit before attempting to remove or install the control board.
Handle the PCB by its edges; avoid touching sensitive components or connector pins to prevent electrostatic discharge (ESD) damage.
Verify that the replacement board matches the original part number and revision level required for the specific drive configuration.
Ensure the board is firmly seated in its designated slot and that all ribbon cables and connectors are securely locked into place.
Check for proper ventilation within the drive enclosure to prevent overheating of the control electronics.
FAQWhat is the primary function of the 1336T-MCB-SP1B?This board acts as the main control processor for the Allen-Bradley 1336T drive, handling the logic and signal processing required to operate the motor.Is this board compatible with other 1336 series drives?This specific control board is designed for the 1336T series. Please verify your drive's specific model number and firmware requirements before installation to ensure compatibility.
نحن نقدم خدمة التوصيل في اليوم التالي من الاثنين إلى الجمعة إذا كان المنتج موجودًا في المخزون والاستثناءات في أيام العطلات.
عطلات نهاية الأسبوع
نحن لا نقدم أي تسليمات في عطلة نهاية الأسبوع.
دولي
نوفر خدمة التوصيل في اليوم التالي، حسب موقعك. تحقق من حالة طلبك عبر هذا الرابط.
DescriptionThe Allen-Bradley 1756-CP3 is a dedicated serial programming cable designed for the ControlLogix and SLC 500 controller families. It serves as the physical communication link between a controller's front-facing RS-232 port and a computer or other Data Terminal Equipment (DTE). This cable is essential for local programming, firmware updates, and troubleshooting when network-based communication, such as Ethernet or ControlNet, is unavailable or not yet configured.Features
Right-Angle Connector: Features a right-angle 9-pin female D-shell connector at the controller end, allowing for chassis door closure during operation.
Null-Modem Configuration: Engineered for point-to-point serial communication, bridging transmit and receive pins between the PLC and PC.
Compatibility: Designed for use with Logix 5550, 5560, and 5570 controllers, as well as SLC 5/03, 5/04, and 5/05 modular processors.
Standard Interface: Compatible with standard PC COM ports or high-quality USB-to-Serial adapters.
Technical Specifications
Brand
Allen-Bradley
Product Line
ControlLogix / SLC 500
Cable Type
Serial RS-232 Programmer Cable
Length
10 feet (3 meters)
Connector A
9-pin D-shell (Right-Angle Female)
Connector B
9-pin D-shell (Straight Female)
Protocol
DF1 (RS-232)
Installation Guidelines
Ensure the controller is powered or in a safe state before connecting or disconnecting the cable to prevent potential communication errors.
The right-angle connector should be seated fully into the controller's front-facing port to ensure a secure connection.
Avoid routing the cable near high-voltage power lines or heavy electromagnetic interference (EMI) sources to maintain signal integrity during data transfer.
If using a USB-to-Serial converter, ensure the driver is correctly mapped to the COM port in your programming software (e.g., RSLinx).
FAQIs this cable compatible with USB ports?The 1756-CP3 features a 9-pin serial connector. To use it with a modern computer lacking a native COM port, you must use a high-quality USB-to-Serial converter. Ensure the converter supports the DF1 protocol.Can I keep this cable connected while the ControlLogix chassis door is closed?Yes. The 1756-CP3 is specifically designed with a right-angle connector at the controller end to provide the necessary clearance for the chassis door to close while the cable is attached.
نحن نقدم خدمة التوصيل في اليوم التالي من الاثنين إلى الجمعة إذا كان المنتج موجودًا في المخزون والاستثناءات في أيام العطلات.
عطلات نهاية الأسبوع
نحن لا نقدم أي تسليمات في عطلة نهاية الأسبوع.
دولي
نوفر خدمة التوصيل في اليوم التالي، حسب موقعك. تحقق من حالة طلبك عبر هذا الرابط.
DescriptionThe Allen-Bradley 1756-L1 is a foundational processor module within the ControlLogix (Logix5550) automation family. As a chassis-based controller, it is designed to reside in any slot of a 1756 ControlLogix chassis, facilitating seamless communication with I/O modules and other controllers across the ControlBus backplane. This module provides a modular and flexible control solution for various industrial automation tasks.Features
Modular Design: Occupies a single slot in any standard 1756 ControlLogix chassis.
Memory Expansion: Features 64 KB of built-in user memory, with support for expansion via 1756-M1 (128 KB), 1756-M2 (512 KB), or 1756-M3 (2 MB) memory modules.
Data Retention: Supports 1756-BA1 or 1756-BA2 lithium battery modules to maintain volatile memory during power-down cycles.
Backplane Communication: High-speed data exchange via the ControlLogix backplane.
Technical Specifications
Brand
Allen-Bradley
Product Line
ControlLogix (Logix5550)
Module Type
Processor / Controller
User Memory
64 KB
Backplane Current (5V DC)
120 mA
Backplane Current (24V DC)
2 mA
Power Dissipation
4.1 Watts
Isolation Voltage
30V (Continuous)
Slot Width
1 Slot
Operating Temperature
0 to 60 degC (32 to 140 degF)
Installation Guidelines
ESD Protection: Always use a grounded wrist strap when handling the module to prevent electrostatic discharge damage to internal components.
Power Down: Ensure the chassis power is disconnected before inserting or removing the processor module from the backplane.
Slot Placement: The 1756-L1 can be installed in any slot of a 1756 chassis; ensure the module is fully seated and the top/bottom latches are secured.
Battery Installation: Install the compatible lithium battery module (1756-BA1 or 1756-BA2) prior to operation to ensure program retention.
Environment: Maintain adequate airflow within the cabinet to ensure the module operates within its specified temperature range of 0 to 60 degC.
FAQDoes this module include a memory card?No, the 1756-L1 comes with 64 KB of built-in memory. External memory expansion modules (1756-M1, 1756-M2, or 1756-M3) must be purchased separately if additional memory is required.Is this module compatible with modern ControlLogix chassis?Yes, the 1756-L1 is compatible with standard 1756 ControlLogix chassis, provided the system architecture supports the specific Logix5550 processor generation.
نحن نقدم خدمة التوصيل في اليوم التالي من الاثنين إلى الجمعة إذا كان المنتج موجودًا في المخزون والاستثناءات في أيام العطلات.
عطلات نهاية الأسبوع
نحن لا نقدم أي تسليمات في عطلة نهاية الأسبوع.
دولي
نوفر خدمة التوصيل في اليوم التالي، حسب موقعك. تحقق من حالة طلبك عبر هذا الرابط.
DescriptionThe Allen-Bradley 1746SC-INI4VI is an isolated analog input module designed for use with the SLC 500 controller platform. This module provides four high-resolution, isolated input channels capable of measuring both voltage and current signals, making it suitable for demanding industrial instrumentation and process control applications where signal isolation is required to prevent ground loops and noise interference.Features
Four isolated analog input channels
Supports multiple voltage ranges: 0-10 VDC, +/- 10 VDC, 0-5 VDC, and 1-5 VDC
Supports multiple current ranges: 0-20 mA and 4-20 mA
High-resolution 16-bit analog-to-digital conversion
Designed for seamless integration into the SLC 500 I/O chassis
ApplicationsThis module is typically utilized in process control environments requiring precise monitoring of sensors, transmitters, and transducers. It is commonly deployed in applications involving flow, pressure, temperature, and level monitoring where electrical isolation between channels or between the field devices and the backplane is necessary for system stability.Technical Specifications
Product Model
1746SC-INI4VI
Module Type
Isolated Current/Voltage Input
Number of Inputs
4
Resolution
16 Bits
Current Consumption
570 mA @ 5 VDC
Supported Voltage Ranges
0-10 VDC, +/- 10 VDC, 0-5 VDC, 1-5 VDC
Supported Current Ranges
0-20 mA, 4-20 mA
Installation Guidelines
Ensure the SLC 500 chassis power is disconnected before installing or removing the module.
Handle the module by the edges to avoid contact with sensitive electronic components; use proper ESD grounding practices.
Verify that the module is firmly seated in the chassis slot and secured with the provided mounting screws.
Use shielded twisted-pair cabling for all analog signal connections to minimize EMI/RFI noise.
Ensure proper grounding of cable shields at the source or module end as per standard industrial control wiring practices.
Check that the input signal ranges are correctly configured in the PLC software before applying field power.
FAQDoes this module require external power?The 1746SC-INI4VI draws its operational power from the SLC 500 backplane (570 mA at 5 VDC). Ensure your power supply capacity is sufficient to support the addition of this module.Is this module compatible with all SLC 500 chassis?This module is designed for the standard SLC 500 I/O chassis. Please verify your specific chassis power budget and slot availability before installation.
نحن نقدم خدمة التوصيل في اليوم التالي من الاثنين إلى الجمعة إذا كان المنتج موجودًا في المخزون والاستثناءات في أيام العطلات.
عطلات نهاية الأسبوع
نحن لا نقدم أي تسليمات في عطلة نهاية الأسبوع.
دولي
نوفر خدمة التوصيل في اليوم التالي، حسب موقعك. تحقق من حالة طلبك عبر هذا الرابط.
DescriptionThe Allen-Bradley 1746-RL70 is a maintenance and identification accessory designed specifically for high-density digital modules within the SLC 500 platform. This Octal Label Kit provides clear, professional-grade terminal identification for 32-point modules, ensuring that wiring remains organized and traceable during system operation and maintenance.Features
Octal Addressing Support: Specifically designed to label terminals in octal format (0-7, 10-17, 20-27, 30-37), aligning with the SLC 500 processor addressing scheme.
High-Density Compatibility: Optimized for 32-point I/O modules where terminal space is limited and clear identification is critical for safety.
Maintenance Efficiency: Facilitates rapid identification of I/O points, reducing downtime during troubleshooting or module replacement.
Durable Construction: Engineered to withstand the industrial environment of an SLC 500 rack assembly.
ApplicationsThe 1746-RL70 is intended for use with 32-point digital I/O modules in the Allen-Bradley SLC 500 series. It is commonly utilized in control cabinets where high-density wiring requires clear, error-free labeling to prevent miswiring during field service.Technical Specifications
Brand
Allen-Bradley
Part Number
1746-RL70
Product Type
Octal Label Kit
Compatibility
1746-OB32, 1746-IV32, 1746-OV32, 1746-IB32
Lifecycle Status
Discontinued (Jan 31, 2017)
Installation Guidelines
Surface Preparation: Ensure the module terminal block surface is clean, dry, and free of oil or dust before applying the adhesive labels.
Alignment: Carefully align the label with the corresponding terminal rows to ensure the octal addressing (0-7, 10-17, etc.) matches the physical terminal layout.
Application: Apply firm, even pressure across the label surface to ensure long-term adhesion.
Verification: Verify that the labels are legible and correctly oriented before finalizing field wiring.
FAQIs the 1746-RL70 compatible with all SLC 500 modules?No, this kit is specifically designed for 32-point "octal" digital modules, such as the 1746-OB32, 1746-IV32, 1746-OV32, and 1746-IB32. It is not intended for standard 8 or 16-point modules.Can these labels be reused?These are typically single-use adhesive labels. Once removed or repositioned, the adhesive strength may degrade, and it is recommended to use a fresh label for permanent installations.
نحن نقدم خدمة التوصيل في اليوم التالي من الاثنين إلى الجمعة إذا كان المنتج موجودًا في المخزون والاستثناءات في أيام العطلات.
عطلات نهاية الأسبوع
نحن لا نقدم أي تسليمات في عطلة نهاية الأسبوع.
دولي
نوفر خدمة التوصيل في اليوم التالي، حسب موقعك. تحقق من حالة طلبك عبر هذا الرابط.
DescriptionThe Allen-Bradley 1746-OW16 is a high-performance 16-point digital output module designed for the SLC 500 programmable logic controller (PLC) system. This module features electromechanical relay contacts, providing robust isolation and the ability to switch a wide range of AC and DC voltages. With its 16 outputs divided into two isolated groups of eight, it offers significant flexibility for complex control applications, allowing users to manage different voltage types simultaneously without the need for external interposing relays.Features
16 normally open (N.O.) relay contact outputs.
Two isolated groups of 8 points each, allowing for mixed-voltage operation (AC and DC).
Wide operating voltage range: 5 to 265V AC and 5 to 125V DC.
Removable terminal block for simplified field wiring and maintenance.
Front-panel LED status indicators for quick diagnostic monitoring.
Dry contact design eliminates the need for intermediary relay circuitry in many applications.
Applications
Manufacturing and machine automation, including assembly lines and conveyors.
Water and wastewater processing for control of dosing pumps, valves, and mixers.
Food, beverage, and packaging equipment such as sorting gates and sealers.
Building automation systems for lighting, HVAC, and damper control.
Heavy industrial loops requiring relay isolation.
Technical Specifications
Model
1746-OW16
Manufacturer
Allen-Bradley (Rockwell Automation)
Output Type
Electromechanical Relay (N.O.)
Number of Outputs
16
Points per Common
8
Operating Voltage
5 to 265V AC / 5 to 125V DC
Min. Load Current
10 mA @ 5V DC
Operating Temperature
0 to 60 degC (32 to 140 degF)
Storage Temperature
-40 to 85 degC (-40 to 185 degF)
Operating Humidity
5 to 95% (non-condensing)
Installation Guidelines
Slot Selection: The 1746-OW16 can be installed in any available I/O slot of an SLC 500 chassis. Note that Slot 0 is reserved for the processor or remote I/O adapter.
Handling: Always power down the chassis before inserting or removing any I/O module to prevent electrical damage or system faults.
Mounting: Align the module's circuit board with the chassis card guides. Slide the module in until the top and bottom locking tabs snap securely into place.
Wiring: Ensure external fusing is installed for each output to protect the relay contacts from overcurrent or short-circuit conditions, as the module does not include internal fusing.
Environment: Ensure the installation area is free from excessive vibration and within the specified temperature and humidity ranges.
FAQWhat is the 1746-OW16?The 1746-OW16 is a 16-point discrete relay output module used with the SLC 500 programmable logic controller family to interface with field devices.Can I mix AC and DC voltages on the same module?Yes. Because the 16 channels are split into two groups of 8 with separate common terminals, you can use DC voltage for one group and AC voltage for the other simultaneously.What is the minimum load current?The module requires a minimum load current of 10 mA at 5V DC. If the connected device draws less than this, the relay may not switch reliably.
نحن نقدم خدمة التوصيل في اليوم التالي من الاثنين إلى الجمعة إذا كان المنتج موجودًا في المخزون والاستثناءات في أيام العطلات.
عطلات نهاية الأسبوع
نحن لا نقدم أي تسليمات في عطلة نهاية الأسبوع.
دولي
نوفر خدمة التوصيل في اليوم التالي، حسب موقعك. تحقق من حالة طلبك عبر هذا الرابط.
DescriptionThe Allen-Bradley 1746-OB6EI is a specialized high-current discrete output module designed for the SLC 500 programmable logic controller platform. This module provides six (6) sourcing DC outputs, each capable of handling up to 2.0 Amps of continuous current. Engineered for demanding industrial environments, the module features electronic protection and individual channel isolation, allowing for the use of independent power sources across different output points.Features
High Current Capacity: Supports up to 2.0 Amps per point, with a total module capacity of 12.0 Amps.
Electronic Protection: Integrated thermal cut-out and current-limiting circuitry protect against short circuits and overcurrent conditions.
Individually Isolated: Each of the six outputs is isolated, providing flexibility in power supply configuration.
Auto-Reset Function: Channels automatically resume operation after cooling below the thermal threshold following a fault.
Status Indicators: Front-panel LEDs provide clear visual feedback on output status.
ApplicationsThis module is ideal for controlling high-current DC loads such as solenoids, contactors, and actuators directly from the SLC 500 backplane. Its individual isolation makes it suitable for applications requiring mixed-voltage control or complex power distribution schemes.Technical Specifications
Parameter
Specification
Brand
Allen-Bradley
Product Line
SLC 500
Module Type
Digital DC Output (Sourcing)
Number of Outputs
6 (Individually Isolated)
Voltage Range
10-30V DC
Continuous Current per Point
2.0 Amps
Continuous Current per Module
12.0 Amps
Backplane Current (5V)
46 mA
On-Signal Delay
1.0 ms
Off-Signal Delay
2.0 ms
On-State Voltage Drop
1.0V at 2.0 Amps
Surge Current
4.0 Amps (10 ms)
Heat Dissipation
2.9 Watts
Installation Guidelines
Power Down: Always disconnect backplane power before inserting or removing the module from the chassis.
ESD Precautions: Use a grounded wrist strap when handling the module to prevent electrostatic discharge damage to internal components.
Wiring: Ensure all field wiring is properly secured. Note that this module does not provide reverse polarity protection; verify DC polarity before connecting power.
External Protection: The internal electronic protection does not replace the requirement for external, code-compliant fuses or circuit breakers.
Environment: Ensure adequate ventilation within the enclosure to maintain operating temperatures within specified limits.
FAQDoes this module include fuses?No, the 1746-OB6EI features internal electronic protection (current limiting and thermal cut-out). This does not replace the need for external, code-compliant fuses or circuit breakers in your control circuit.Can I use different power supplies for each output?Yes, because the outputs are individually isolated, you can connect different DC power sources to each channel, provided they fall within the 10-30V DC operating range.
نحن نقدم خدمة التوصيل في اليوم التالي من الاثنين إلى الجمعة إذا كان المنتج موجودًا في المخزون والاستثناءات في أيام العطلات.
عطلات نهاية الأسبوع
نحن لا نقدم أي تسليمات في عطلة نهاية الأسبوع.
دولي
نوفر خدمة التوصيل في اليوم التالي، حسب موقعك. تحقق من حالة طلبك عبر هذا الرابط.
DescriptionThe Allen-Bradley 1746-NIO4V is a high-resolution combination analog input and output module designed for the SLC 500 programmable logic controller system. This module provides a versatile solution for applications requiring both analog signal monitoring and control within a single slot. It features two analog input channels and two analog output channels, supporting voltage and current signal ranges to interface with a variety of field devices such as sensors, transducers, and actuators.Features
Integrated I/O: Combines 2 analog inputs and 2 analog outputs in one module.
High Resolution: Designed for precision control and monitoring tasks.
Voltage and Current Support: Compatible with -10 to +10V DC and -20 to +20 mA signal ranges.
SLC 500 Compatibility: Designed specifically for seamless integration into the Allen-Bradley SLC 500 chassis backplane.
Status Indicators: Includes front-panel LED indicators for module health and I/O status monitoring.
ApplicationsThis module is widely used in industrial automation environments for process control, including temperature regulation, pressure monitoring, and variable speed drive control. It is suitable for applications where space in the SLC 500 chassis is limited, allowing for efficient use of rack slots by combining I/O types.Technical Specifications
Product Model
1746-NIO4V
Manufacturer
Allen-Bradley
Module Type
Analog Input/Output (Combination)
Input Channels
2
Output Channels
2
Voltage Input Range
-10 to +10V DC
Current Input Range
-20 to +20 mA
Backplane Current (5.1V)
0.55 mA
Bandwidth
10 Hz
Installation Guidelines
Power Down: Always disconnect power from the SLC 500 chassis before inserting or removing any I/O module to prevent electrical damage.
ESD Protection: Use proper electrostatic discharge (ESD) grounding procedures when handling the module to protect sensitive internal circuitry.
Slot Placement: Ensure the module is fully seated in the chassis slot and secured with the top and bottom retaining screws.
Wiring: Use shielded twisted-pair cabling for analog signals to minimize noise interference. Ensure proper grounding of the shield at one end only to avoid ground loops.
Signal Routing: Keep analog signal wiring separate from high-voltage AC power lines to prevent EMI-induced signal degradation.
FAQIs the 1746-NIO4V still in production?No, the Allen-Bradley 1746-NIO4V was officially discontinued by the manufacturer as of May 31, 2021. We provide refurbished or surplus units to support legacy systems.What is the primary function of this module?The 1746-NIO4V acts as an interface between analog field devices and the SLC 500 processor, converting analog signals to digital values for the PLC and vice versa for control outputs.
DescriptionThe Allen-Bradley 1746-IO4 is a compact, entry-level combination I/O module designed for the SLC 500 series programmable controller family. This module provides a space-saving solution for small-scale automation tasks, featuring two 120V AC inputs and two relay contact outputs (Form A, Normally Open). It is an ideal choice for simple control loops or for expanding a chassis with minimal I/O requirements without occupying excessive slot space.Features
Compact Design: Smallest combination I/O unit in the SLC 500 series.
Versatile Relay Outputs: Dry contacts support a wide range of switching voltages, including 5 to 265V AC or 5 to 125V DC.
Low Power Consumption: Minimal backplane current draw (30 mA at 5V DC) preserves the system power budget.
Flexible Input: Two integrated 120V AC inputs for standard industrial sensing.
ApplicationsThe 1746-IO4 is commonly utilized in small machine control, auxiliary I/O expansion for SLC 500 chassis, and simple interlock or monitoring applications where only a few points of I/O are required.Technical Specifications
Brand
Allen-Bradley
Product Line
SLC 500
Module Type
Digital I/O Combination Module
Inputs
2 x 120V AC
Outputs
2 x Relay (Form A, Normally Open)
Input Voltage Range
85–132V AC (47–63 Hz)
Output Voltage Range
5–265V AC / 5–125V DC
Max. Continuous Current (Relay)
1.5A at 120V AC / 1.2A at 24V DC
Backplane Current (5V DC)
30 mA
Backplane Current (24V DC)
25 mA
Signal Delay
35 ms (ON) / 45 ms (OFF)
Operating Temperature
-25 to 60 degC (-13 to 140 degF)
Installation Guidelines
Power Down: Always remove power from the SLC 500 chassis before inserting or removing any I/O module to prevent electrical damage or unexpected system behavior.
ESD Protection: Handle the module by its edges and avoid touching the backplane connector pins to prevent electrostatic discharge damage.
Mounting: Ensure the module is fully seated in the chassis slot and the top/bottom retaining screws are tightened to secure the module and ensure proper grounding.
Wiring: Use shielded cables for I/O signals to minimize EMI interference. Keep high-voltage AC wiring separate from low-voltage signal wiring.
Environment: Ensure the installation location provides adequate ventilation to maintain the operating temperature within the specified range.
FAQWhat is the primary function of the 1746-IO4?The 1746-IO4 acts as a combination I/O module for the SLC 500 system, providing two AC inputs for sensors and two relay outputs for switching external devices.Can the relay outputs switch DC loads?Yes, the relay contacts are "dry" and can switch both AC and DC voltages within the specified ranges (5–265V AC or 5–125V DC).
نحن نقدم خدمة التوصيل في اليوم التالي من الاثنين إلى الجمعة إذا كان المنتج موجودًا في المخزون والاستثناءات في أيام العطلات.
عطلات نهاية الأسبوع
نحن لا نقدم أي تسليمات في عطلة نهاية الأسبوع.
دولي
نوفر خدمة التوصيل في اليوم التالي، حسب موقعك. تحقق من حالة طلبك عبر هذا الرابط.
DescriptionThe Allen-Bradley 1746-HSTP1 is a high-performance Stepper Control Module designed for the SLC 500 programmable logic controller platform. This module provides precise motion control by generating pulse trains to drive stepper motor controllers, enabling accurate positioning and velocity control in industrial automation applications.Features
Supports trapezoidal velocity profiles for smooth motion transitions.
Wide speed range from 1 to 250,000 pulses per second.
Fast acceleration step rate of 4 milliseconds or less.
Differential inputs for robust signal integrity in high-noise environments.
Compatible with standard stepper motor driver interfaces.
ApplicationsThe 1746-HSTP1 is ideal for applications requiring precise point-to-point positioning, such as indexing tables, conveyor positioning, packaging machinery, and automated assembly equipment integrated within an SLC 500 control system.Technical Specifications
Model
1746-HSTP1
Platform
SLC 500
Speed Range
1 to 250,000 pulses per second
Acceleration Profile
Trapezoidal
Acceleration Step Rate
4 ms or less
Input Type
Differential
Output Type
Digital
Input Frequency
250 kHz
Backplane Current (5V)
200 mA
Backplane Current (24V)
90 mA
Installation Guidelines
Ensure the SLC 500 chassis is powered down before inserting or removing the module to prevent electrical damage.
The module must be seated firmly in the chassis slot and secured with the integrated locking tabs.
Use shielded cabling for differential input connections to minimize electromagnetic interference (EMI).
Maintain proper grounding practices for the stepper motor driver and the PLC chassis to ensure system stability.
Keep the module away from high-heat sources and ensure adequate ventilation within the control cabinet.
Handle the module using ESD-safe practices to prevent damage to internal circuitry.
FAQWhat is the primary function of the 1746-HSTP1?The 1746-HSTP1 acts as a motion control interface for the SLC 500 system, converting digital commands from the PLC into pulse train signals required to operate stepper motor drivers.Is this module compatible with all SLC 500 chassis?The 1746-HSTP1 is designed for standard SLC 500 I/O chassis. Please verify your specific chassis power supply capacity to ensure it can accommodate the 200mA (5V) and 90mA (24V) current draw of the module.
نحن نقدم خدمة التوصيل في اليوم التالي من الاثنين إلى الجمعة إذا كان المنتج موجودًا في المخزون والاستثناءات في أيام العطلات.
عطلات نهاية الأسبوع
نحن لا نقدم أي تسليمات في عطلة نهاية الأسبوع.
دولي
نوفر خدمة التوصيل في اليوم التالي، حسب موقعك. تحقق من حالة طلبك عبر هذا الرابط.
DescriptionThe Allen-Bradley 1746-BAS-T is a high-speed BASIC module designed for the SLC 500 platform. It functions as an independent co-processor, enabling the execution of complex calculations, string manipulation, and custom communication protocols without impacting the main PLC processor's scan time. The '-T' designation signifies an enhanced clock speed compared to the standard 1746-BAS, providing superior performance for high-throughput data collection and interfacing with external devices such as HMIs, barcode scanners, and modems.Features
High-speed processing for advanced data handling and custom BASIC programming.
Three integrated communication ports for versatile connectivity.
Supports RS-232, RS-422, and RS-485 electrical standards on PRT1 and PRT2.
Dedicated DH-485 port (PRT3) for network integration and daisy-chain configurations.
24 KB of battery-backed RAM for program and data storage.
Efficient co-processor architecture to reduce main CPU load.
ApplicationsThis module is widely used in industrial automation for custom protocol emulation, complex data processing, and interfacing legacy or third-party serial devices into an SLC 500 control system. It is ideal for applications requiring rapid data throughput that exceeds the capabilities of standard communication modules.Technical Specifications
Brand
Allen-Bradley
Product Line
SLC 500
Module Type
High-Speed BASIC Module
Memory
24 KB (Battery-backed RAM)
Backplane Current (5V DC)
150 mA
Backplane Current (24V DC)
40 mA
Operating Temperature
0 to 60 degC (32 to 140 degF)
Shock Resistance
30 g
Vibration Resistance
2.5 g @ 57-2000 Hz
Installation Guidelines
Ensure the SLC 500 chassis power is disconnected before installing or removing the module.
The module must be seated firmly in the chassis slot to ensure proper backplane connection.
Use shielded communication cables for all serial connections to minimize EMI interference.
Ensure proper grounding of the chassis to a common earth ground to prevent electrical noise.
Handle the module using ESD-safe practices to prevent damage to internal circuitry.
Verify that the battery is properly installed and connected to maintain memory during power cycles.
FAQWhat is the primary difference between the 1746-BAS and the 1746-BAS-T?The 1746-BAS-T is a high-speed version of the standard BASIC module, featuring a faster clock speed for improved processing performance in demanding data-intensive applications.Can I use this module to communicate with third-party serial devices?Yes, PRT1 and PRT2 support RS-232, RS-422, and RS-485 standards, allowing you to write custom BASIC programs to interface with a wide range of third-party serial hardware.
نحن نقدم خدمة التوصيل في اليوم التالي من الاثنين إلى الجمعة إذا كان المنتج موجودًا في المخزون والاستثناءات في أيام العطلات.
عطلات نهاية الأسبوع
نحن لا نقدم أي تسليمات في عطلة نهاية الأسبوع.
دولي
نوفر خدمة التوصيل في اليوم التالي، حسب موقعك. تحقق من حالة طلبك عبر هذا الرابط.
DescriptionThe Allen-Bradley 1746-A10 is a 10-slot modular chassis designed for the SLC 500 programmable logic controller system. This chassis provides the physical mounting and electrical backplane communication required to support up to ten SLC 500 I/O or specialty modules. It serves as the backbone for the controller rack, facilitating power distribution and data exchange between the processor and the connected I/O modules.Features
10-slot capacity for flexible I/O configuration.
Designed specifically for the Allen-Bradley SLC 500 system architecture.
Robust mechanical design for secure module seating and vibration resistance.
Integrates directly with the SLC 500 power supply and processor modules.
ApplicationsThis chassis is used in industrial automation environments requiring a scalable and reliable I/O rack system. It is commonly utilized in manufacturing, process control, and machine automation where multiple I/O modules need to be managed by a single SLC 500 processor.Technical Specifications
Product Model
1746-A10
Slot Count
10
System Compatibility
SLC 500
Manufacturer
Allen-Bradley
Weight
2.05 kg
Installation Guidelines
Ensure the chassis is mounted on a flat, clean, and vibration-dampened surface within an appropriate industrial enclosure.
Verify that the power supply is disconnected before installing or removing any I/O modules from the chassis backplane.
Ensure proper grounding of the chassis to the enclosure backplane to minimize electromagnetic interference (EMI).
Maintain adequate clearance around the chassis to allow for proper airflow and cooling, preventing heat buildup within the rack.
When inserting modules, ensure they are properly aligned with the backplane connector and fully seated before tightening the retaining screws.
FAQWhat is the primary function of the 1746-A10?The 1746-A10 is a 10-slot chassis that provides the electrical backplane and mechanical housing for SLC 500 processor and I/O modules.Is this chassis compatible with all SLC 500 modules?Yes, the 1746-A10 is designed to support standard 1746-series I/O modules used within the SLC 500 platform.Does this unit include a power supply?No, the 1746-A10 is a chassis only. The power supply must be ordered separately and is typically mounted to the side of the chassis.
نحن نقدم خدمة التوصيل في اليوم التالي من الاثنين إلى الجمعة إذا كان المنتج موجودًا في المخزون والاستثناءات في أيام العطلات.
عطلات نهاية الأسبوع
نحن لا نقدم أي تسليمات في عطلة نهاية الأسبوع.
دولي
نوفر خدمة التوصيل في اليوم التالي، حسب موقعك. تحقق من حالة طلبك عبر هذا الرابط.
DescriptionThe Allen-Bradley 1746-IM8 is an 8-point AC input module designed for use within the SLC 500 programmable logic controller (PLC) system. This module provides a reliable interface between high-voltage field devices and the SLC 500 processor, converting 200/240V AC input signals into logic-level signals compatible with the controller. As a standard I/O component, it is engineered to facilitate industrial automation control by monitoring the status of switches, sensors, and other AC-powered field devices.Features
8-point input density for efficient I/O configuration.
Designed for 200/240V AC voltage levels.
Compatible with the Allen-Bradley SLC 500 modular chassis system.
Provides optical isolation between field wiring and internal backplane circuitry.
Status indicators for each input channel for simplified diagnostics.
ApplicationsThis module is widely utilized in industrial environments requiring the monitoring of 240V AC field devices. Typical applications include manufacturing assembly lines, material handling systems, and process control equipment where AC-based sensors or limit switches are integrated into the PLC control architecture.Technical Specifications
Product Model
1746-IM8
Manufacturer
Allen-Bradley
System
SLC 500
Input Voltage
200/240V AC
Number of Inputs
8 Points
Weight
0.2 kg
Installation Guidelines
Ensure the SLC 500 chassis power is disconnected before installing or removing the module to prevent electrical shock or damage to the backplane.
Verify that the module is fully seated in the chassis slot and secured with the top and bottom retaining screws.
Use shielded cabling for field inputs to minimize electromagnetic interference (EMI) in high-noise industrial environments.
Ensure that the input voltage does not exceed the rated 240V AC specification to avoid permanent damage to the module circuitry.
Follow standard ESD (Electrostatic Discharge) handling procedures when touching the module electronics.
FAQIs the 1746-IM8 still in production?No, the 1746-IM8 has been discontinued by the manufacturer. We provide high-quality surplus or refurbished units to support legacy SLC 500 systems.What is the primary function of this module?The 1746-IM8 serves as an interface module that detects 240V AC signals from external field devices and transmits that status to the SLC 500 processor for logic execution.
DescriptionThe Allen-Bradley 1746-A13 is a 13-slot modular chassis designed for the SLC 500 programmable logic controller system. This chassis provides the physical mounting and electrical backplane communication required to support up to 13 I/O or specialty modules. It serves as the backbone for the control system, distributing power and data signals across the installed modules within an SLC 500 rack configuration.Features
Supports up to 13 modules in a single rack configuration.
Robust mechanical design for panel-mount installation.
Integrated backplane for high-speed communication between the processor and I/O modules.
Compatible with the full range of Allen-Bradley 1746 series I/O and specialty modules.
Technical Specifications
Product Model
1746-A13
Series
SLC 500
Slot Count
13 Slots
Mounting Type
Panel Mount
Backplane Current (5.1V DC)
10A
Backplane Current (24V DC)
2.88A
Operating Temperature
0 degC to +60 degC (+32 degF to +140 degF)
Storage Temperature
-40 degC to +85 degC (-40 degF to +185 degF)
Installation Guidelines
Ensure the chassis is mounted on a flat, rigid surface using the provided mounting holes to prevent mechanical stress.
Maintain adequate clearance around the chassis to allow for proper airflow and cooling, as the SLC 500 system relies on convection.
Always power down the system before inserting or removing any I/O modules from the chassis slots to prevent electrical damage or bus errors.
Ensure the chassis is properly grounded to the enclosure backplane to minimize the effects of electromagnetic interference (EMI).
Verify that the power supply module is correctly seated in the leftmost slot and that all other modules are fully engaged with the backplane connectors.
FAQIs this chassis compatible with all SLC 500 modules?The 1746-A13 is designed to support standard 1746 series I/O modules. Please verify your specific module power requirements against the backplane current capacity of the chassis to ensure the total load does not exceed 10A at 5.1V DC or 2.88A at 24V DC.Can this chassis be mounted vertically?While panel mounting is standard, ensure that vertical orientation does not obstruct the ventilation slots or exceed the specified operating temperature range due to reduced cooling efficiency.
نحن نقدم خدمة التوصيل في اليوم التالي من الاثنين إلى الجمعة إذا كان المنتج موجودًا في المخزون والاستثناءات في أيام العطلات.
عطلات نهاية الأسبوع
نحن لا نقدم أي تسليمات في عطلة نهاية الأسبوع.
دولي
نوفر خدمة التوصيل في اليوم التالي، حسب موقعك. تحقق من حالة طلبك عبر هذا الرابط.
DescriptionThe Allen-Bradley 1746-IV32 is a high-density digital input module engineered for the SLC 500 programmable controller platform. It provides 32 discrete sourcing input points within a single-slot module, offering an efficient solution for applications requiring high I/O density in space-constrained chassis environments. This module is designed to interface with field devices that sink current to the common return, supporting flexible configuration across four isolated groups of eight points each.Features
High Density: 32 sourcing inputs in a single-slot footprint.
Isolated Grouping: Four isolated groups of eight points allow for multiple power sources or voltage references.
Compatibility: Fully integrated with the Allen-Bradley SLC 500 system architecture.
Connectivity: Utilizes a 40-pin high-density connector for efficient field wiring via pre-wired cable assemblies or 1492 interface modules.
ApplicationsThis module is widely used in industrial automation systems for monitoring discrete field signals such as proximity switches, pushbuttons, and limit switches. Its high-density design is particularly effective in large-scale control panels where chassis slot availability is limited.Technical Specifications
Model
1746-IV32
Inputs
32 (Sourcing)
Groups
4 (8 points per group)
Voltage Range
15-30V DC (at 50 degC) / 15-26.4V DC (at 60 degC)
On-State Voltage (Min)
15.0V DC
Off-State Voltage (Max)
5.0V DC
Input Current
5.1 mA at 24V DC
Off-State Current (Max)
1.5 mA
Signal Delay
3 ms (ON) / 8 ms (OFF)
Backplane Current (5V)
106 mA
Operating Temperature
0 to 60 degC (32 to 140 degF)
Humidity
5 to 95% (Non-condensing)
Installation Guidelines
Power Down: Always disconnect backplane power before inserting or removing the module from the chassis.
ESD Handling: Use proper electrostatic discharge (ESD) grounding procedures when handling the module to prevent damage to internal circuitry.
Wiring: Ensure the use of appropriate 40-pin cable assemblies. Verify that the field device common return is correctly matched to the sourcing input requirements.
Environment: Install in an enclosure rated for the intended environment, ensuring adequate airflow to maintain operating temperatures within the specified 0-60 degC range.
Grounding: Ensure the SLC 500 chassis is properly grounded according to local electrical codes to minimize EMI interference.
FAQWhat type of field wiring is required for the 1746-IV32?Because this is a high-density module, it does not use standard screw terminals. It requires a 40-pin high-density connector, typically interfaced using a pre-wired cable assembly or a 1492-style terminal block interface module.Can I use different power sources for the inputs?Yes. The 32 inputs are divided into four isolated groups of eight points each, allowing you to use different power sources or voltage references for each group, provided they remain within the 15-30V DC range.
نحن نقدم خدمة التوصيل في اليوم التالي من الاثنين إلى الجمعة إذا كان المنتج موجودًا في المخزون والاستثناءات في أيام العطلات.
عطلات نهاية الأسبوع
نحن لا نقدم أي تسليمات في عطلة نهاية الأسبوع.
دولي
نوفر خدمة التوصيل في اليوم التالي، حسب موقعك. تحقق من حالة طلبك عبر هذا الرابط.
The 1756-PH75 is a high-efficiency, high-voltage direct current (DC) chassis power supply module designed for the Allen-Bradley ControlLogix 1756 platform. This side-mount module serves as the central electrical power source for the backplane, converting facility-level high-voltage DC into regulated multi-rail logic voltages required for processors, communication modules, and I/O.Features
Designed for 125 VDC nominal input power systems.
Provides four regulated output rails: 24 VDC, 5.1 VDC, 3.3 VDC, and 1.2 VDC.
Supports 75 Watts of total backplane output power.
Features ride-through capability of up to 50 ms to prevent system resets during brief input power dips.
Reinforced insulation rated for 250 Volts continuous isolation.
Mounts directly to the left side of standard 1756 Series B chassis.
Passive cooling design; no internal fans required.
ApplicationsThis power supply is engineered for intensive industrial environments where high-voltage DC bus distribution is standard, including electrical substations, mass transit rail infrastructure, marine power generation, and automated manufacturing facilities.Technical Specifications
Model
1756-PH75
Input Voltage Range
90 to 143 VDC
Max Input Power
95 Watts
Max Backplane Output
75 Watts (0 to 60 deg C)
Output Current (24V / 5.1V / 3.3V / 1.2V)
2.8A / 13.0A / 4.0A / 1.5A
Operating Temperature
0 to 60 deg C
Storage Temperature
-40 to 85 deg C
Vibration Resistance
2 g @ 10 to 500 Hz
Weight
1.33 kg
Installation Guidelines
Ensure the ControlLogix chassis is powered down before installing or removing the power supply module.
The module must be installed on the left side of the 1756 chassis.
Use 2.5 mm2 (approx. 14 AWG) solid or stranded copper wire for input connections.
Tighten terminal block screws to 0.8 N·m (7 lb·in) to ensure secure contact and vibration resistance.
Maintain adequate clearance around the module to allow for convective airflow; do not obstruct the open-style chassis.
Ensure the installation environment meets the specified 5 to 95 percent non-condensing humidity requirements.
FAQIs this module compatible with all ControlLogix chassis?The 1756-PH75 is designed for use with 1756 Series B backplanes, including the 1756-A4, A7, A10, A13, and A17 models.Does this module require external cooling?No, the module utilizes an open-style architecture that relies on ambient convective airflow for thermal management.
نحن نقدم خدمة التوصيل في اليوم التالي من الاثنين إلى الجمعة إذا كان المنتج موجودًا في المخزون والاستثناءات في أيام العطلات.
عطلات نهاية الأسبوع
نحن لا نقدم أي تسليمات في عطلة نهاية الأسبوع.
دولي
نوفر خدمة التوصيل في اليوم التالي، حسب موقعك. تحقق من حالة طلبك عبر هذا الرابط.
DescriptionThe 2711P-B10C15A7 is an operator terminal designed for machine interfacing in industrial automation environments, including manufacturing lines, water treatment facilities, and energy management systems. This HMI provides real-time visualization and control, facilitating precise operator inputs and system monitoring.Features
Dual input interface featuring both a keypad and a touchscreen for versatile data entry.
Integrated ControlNet communication protocol supporting scheduled and unscheduled access to controller data.
Supports symbolic CIP addressing for seamless integration with ControlLogix systems.
Built-in Network Access port for local network connectivity.
Accommodates redundant cabling configurations for high-availability network requirements.
ApplicationsThis operator terminal is suitable for process control, machine status monitoring, and data logging in demanding industrial setups where reliable human-machine interaction is required.Technical Specifications
Model
2711P-B10C15A7
Brand
Allen-Bradley
Display Size
10.4 in
Display Type
Color
Memory
256 MB
Input Power
85-264 VAC
Operating Temperature
0 to 55 degC
Backlight Replacement
2711P-RL10C
Series Compatibility
Ser A, B, C, D, and F
Installation Guidelines
Ensure the device is installed in a clean, dry environment within the specified operating temperature range of 0 to 55 degC.
Verify that the input power supply is within the 85-264 VAC range before connection.
Use proper grounding techniques to prevent electrical noise interference and ensure stable operation.
When installing in an enclosure, ensure adequate ventilation to maintain operating temperatures and prevent overheating.
Always power down the unit before performing any wiring, maintenance, or component replacement.
Handle with care to avoid damage to the touchscreen and keypad interface.
FAQWhat communication protocol does this unit use?This model utilizes the ControlNet communication protocol for data exchange with controllers.Can this unit be used with ControlLogix systems?Yes, it supports symbolic CIP addressing, which allows for direct integration with ControlLogix controllers.What is the replacement part for the backlight?The compatible backlight replacement part number is 2711P-RL10C.
نحن نقدم خدمة التوصيل في اليوم التالي من الاثنين إلى الجمعة إذا كان المنتج موجودًا في المخزون والاستثناءات في أيام العطلات.
عطلات نهاية الأسبوع
نحن لا نقدم أي تسليمات في عطلة نهاية الأسبوع.
دولي
نوفر خدمة التوصيل في اليوم التالي، حسب موقعك. تحقق من حالة طلبك عبر هذا الرابط.
DescriptionThe Allen-Bradley 1771-WS is a specialized Weigh Scale Module designed for the PLC-5 programmable controller platform. This single-channel module is engineered to interface directly with strain-gauge load cells, providing precise weight measurement and signal conditioning for industrial weighing applications. It is a legacy component, often utilized in single-vessel weighing systems where high-accuracy data acquisition is required within a PLC-5 environment.Features
Single-channel input for strain-gauge load cell connectivity.
Designed specifically for integration with the Allen-Bradley PLC-5 I/O chassis.
Supports 0 to 30 mV input signal ranges.
Integrated signal processing for weight measurement applications.
Standard 5 VDC backplane power requirement.
ApplicationsThis module is typically used in industrial automation environments requiring weight monitoring, such as batching systems, vessel weighing, inventory management, and force measurement tasks where PLC-5 control systems are currently deployed.Technical Specifications
Product Model
1771-WS
Module Type
Weigh Scale Module
Compatibility
PLC-5 Systems
Channels
1
Input Range
0 to 30 mV
Backplane Current
1.5 A at 5 VDC
Weight
0.74 kg
Installation Guidelines
Ensure the PLC-5 chassis power is disconnected before installing or removing the 1771-WS module to prevent electrical damage.
Verify that the module is correctly seated in the I/O slot and that the backplane connector is fully engaged.
Use shielded cabling for load cell connections to minimize electromagnetic interference (EMI) and ensure signal integrity.
Route signal wires away from high-voltage AC lines and motor control cabling.
Ensure the module is properly grounded according to the PLC-5 system installation manual to maintain measurement accuracy.
Handle with standard ESD precautions to protect internal circuitry.
FAQIs the 1771-WS still in production?No, the 1771-WS has been discontinued by the manufacturer. It is primarily available through surplus or secondary market channels.What is the input range for this module?The 1771-WS supports an input signal range of 0 to 30 mV, suitable for standard strain-gauge load cell sensors.Does this module require external power?The module draws its operating power from the PLC-5 backplane at 5 VDC; ensure your power supply can accommodate the 1.5 A current draw of this module.
نحن نقدم خدمة التوصيل في اليوم التالي من الاثنين إلى الجمعة إذا كان المنتج موجودًا في المخزون والاستثناءات في أيام العطلات.
عطلات نهاية الأسبوع
نحن لا نقدم أي تسليمات في عطلة نهاية الأسبوع.
دولي
نوفر خدمة التوصيل في اليوم التالي، حسب موقعك. تحقق من حالة طلبك عبر هذا الرابط.
The Allen-Bradley 1756-DH485 is a specialized communication interface bridge module designed for the ControlLogix automation platform. This single-slot module functions as a protocol gateway, enabling ControlLogix processors to interface directly with legacy DH-485 (Data Highway 485) networks. It is an essential component for system migrations, allowing for the integration of legacy SLC 500, MicroLogix, or PanelView hardware into high-performance ControlLogix systems without requiring complete field rewiring.Features
Dual-Channel Connectivity: Features two independent DB9 communication ports (Channel A and Channel B), allowing for flexible network configuration as either an initiator or a responding node.
Network Capacity: Supports up to 32 logical devices per network segment.
Galvanic Isolation: Integrated electrical isolation barriers protect internal backplane logic from ground-loop fluctuations and field surges.
Protocol Support: Utilizes standard token-passing protocol layers over RS-485 physical media.
ApplicationsThis module is primarily used in industrial environments for phased equipment retrofits and system upgrades. It allows facilities to maintain communication with legacy DH-485 devices while transitioning to modern ControlLogix control architectures, effectively reducing implementation costs and minimizing system downtime.Technical Specifications
Model
1756-DH485
Product Line
ControlLogix
Module Type
DH-485 Communication Bridge
Ports
2x DB9 D-shell (Channel A/B)
Baud Rates
9.6 kbps, 19.2 kbps
Backplane Current (5.1V)
850 mA
Backplane Current (24V)
1.7 mA
Power Dissipation
4.5 Watts
Isolation Voltage
30V continuous
Operating Temperature
0 to 60 deg C
Humidity
5 to 95 percent non-condensing
Installation Guidelines
Ensure the ControlLogix chassis is powered down before inserting or removing the module.
The module occupies a single slot in any standard 1756 ControlLogix chassis.
Use shielded communication cables for RS-485 connections to minimize EMI interference.
Ensure proper grounding of the chassis to a common earth ground to maintain signal integrity.
Handle the module using ESD-safe practices to prevent damage to sensitive electronic components.
FAQCan this module be used in any ControlLogix chassis?Yes, the 1756-DH485 is compatible with standard 1756 chassis series, including 1756-A4, 1756-A7, 1756-A10, 1756-A13, and 1756-A17.Does the module require external power?No, the module is powered directly through the ControlLogix backplane; it does not require an external power supply for its own operation.
نحن نقدم خدمة التوصيل في اليوم التالي من الاثنين إلى الجمعة إذا كان المنتج موجودًا في المخزون والاستثناءات في أيام العطلات.
عطلات نهاية الأسبوع
نحن لا نقدم أي تسليمات في عطلة نهاية الأسبوع.
دولي
نوفر خدمة التوصيل في اليوم التالي، حسب موقعك. تحقق من حالة طلبك عبر هذا الرابط.
The 2711P-B10C15A6 is an industrial operator terminal from the Allen-Bradley PanelView Plus 1000 series. Engineered for robust human-machine interfacing, this unit provides reliable control and visualization capabilities in demanding industrial environments, including manufacturing assembly lines and water treatment facilities. As a legacy component, it is designed for integration into existing control architectures requiring ControlNet connectivity.Features
10.4-inch color display for clear visualization of process data.
Dual input interface featuring both a physical keypad and a touchscreen for versatile operator control.
Integrated ControlNet communication port supporting scheduled and unscheduled data access.
Supports redundant cabling configurations for high-availability network requirements.
Compatible with symbolic CIP addressing for direct communication with ControlLogix controllers.
Dedicated Network Access port for simplified local maintenance and connectivity.
ApplicationsThis operator terminal is suitable for various industrial automation tasks, including machine-level monitoring, process control, and system diagnostics in environments where reliable HMI performance is required to minimize downtime.Technical Specifications
Model
2711P-B10C15A6
Brand
Allen-Bradley
Input Type
Keypad and Touchscreen
Display Size
10.4 in.
Display Type
Color
Communication
ControlNet
Power Supply
85-264 VAC
Memory
128 MB
Operating Temperature
0 to 55 deg C
Series Compatibility
Ser A, B, C, D, and F
Installation Guidelines
Ensure the terminal is mounted in a suitable enclosure that provides adequate protection against environmental hazards.
Verify that the power supply voltage is within the specified 85-264 VAC range before applying power.
Use appropriate shielded cabling for ControlNet connections to minimize EMI interference.
Maintain proper ventilation around the unit to ensure the operating temperature remains within the 0 to 55 deg C range.
Always disconnect power before installing or removing the module or performing wiring maintenance.
Ensure the unit is properly grounded according to local electrical codes to prevent electrical noise issues.
FAQIs this terminal still supported by the manufacturer?No, the 2711P-B10C15A6 has been discontinued by Allen-Bradley. It is primarily sourced for maintenance and repair of legacy systems.What communication protocol does this unit use?This specific model utilizes the ControlNet communication protocol for data exchange with controllers.
نحن نقدم خدمة التوصيل في اليوم التالي من الاثنين إلى الجمعة إذا كان المنتج موجودًا في المخزون والاستثناءات في أيام العطلات.
عطلات نهاية الأسبوع
نحن لا نقدم أي تسليمات في عطلة نهاية الأسبوع.
دولي
نوفر خدمة التوصيل في اليوم التالي، حسب موقعك. تحقق من حالة طلبك عبر هذا الرابط.
DescriptionThe Allen-Bradley 1734-IE2V is a POINT I/O analog input module designed for high-density, space-saving applications in industrial automation systems. This module provides two single-ended, non-isolated voltage inputs, utilizing Delta Sigma conversion technology to ensure accurate data acquisition for process control and monitoring tasks.Features
Two single-ended, non-isolated voltage input channels.
Delta Sigma conversion type for reliable signal processing.
Signed Integer data format for seamless integration with ControlLogix or CompactLogix controllers.
Compact POINT I/O form factor for flexible, modular mounting on DIN rails.
Key switch position 3 for mechanical module identification and protection.
Open-type enclosure rating suitable for controlled industrial environments.
Technical Specifications
Module Type
Analog Input Module
Inputs
2 Single-ended, non-isolated
Signal Type
Voltage
Conversion Type
Delta Sigma
Absolute Accuracy
0.1% Full Scale at 25 degC (77 degF)
Data Format
Signed Integer
Key Switch Position
3
Enclosure Type
Open
Installation Guidelines
Ensure the system power is disconnected before installing or removing the module from the POINT I/O base.
Mount the module onto a standard DIN rail, ensuring the locking mechanism is fully engaged.
Verify that the key switch is set to position 3 to match the module type and prevent incorrect module insertion.
Use shielded twisted-pair cabling for analog signals to minimize electromagnetic interference (EMI).
Maintain proper grounding practices for the I/O base to ensure signal integrity and safety.
Operate within the specified environmental conditions to avoid thermal degradation or measurement inaccuracies.
FAQWhat is the primary function of the 1734-IE2V?The 1734-IE2V is an analog input module used within the POINT I/O system to convert field voltage signals into digital data for processing by the PLC.Is this module isolated?No, the 1734-IE2V features non-isolated, single-ended inputs.What is the key switch position for this module?The key switch position for the 1734-IE2V is set to 3.
نحن نقدم خدمة التوصيل في اليوم التالي من الاثنين إلى الجمعة إذا كان المنتج موجودًا في المخزون والاستثناءات في أيام العطلات.
عطلات نهاية الأسبوع
نحن لا نقدم أي تسليمات في عطلة نهاية الأسبوع.
دولي
نوفر خدمة التوصيل في اليوم التالي، حسب موقعك. تحقق من حالة طلبك عبر هذا الرابط.
DescriptionThe Allen-Bradley 1756-CPR2 is a specialized redundant power supply cable designed for use within the ControlLogix platform. This cable facilitates the connection of redundant power supplies to the 1756 chassis, ensuring continuous power availability for critical control applications. It is engineered to maintain system integrity by providing a reliable interface for power distribution in high-availability configurations.Features
Designed specifically for ControlLogix redundant power supply configurations.
Provides secure, reliable power distribution between power supplies and the chassis.
Robust construction suitable for industrial control cabinet environments.
Standardized length for ease of installation in standard rack setups.
Technical Specifications
Product Model
1756-CPR2
Series
ControlLogix
Cable Length
3 feet (0.91 meters)
Input Current
970 mA at 5.1V DC; 1.7 mA at 24V DC
Thermal Dissipation
17.4 BTU per hour
Weight
0.293 kg
Installation Guidelines
Ensure the power supply is disconnected from the main power source before attempting to connect or disconnect the 1756-CPR2 cable.
Route the cable away from high-voltage lines and sources of electromagnetic interference (EMI) to prevent signal noise or potential power instability.
Verify that the connectors are fully seated and locked into the corresponding power supply and chassis ports to ensure a stable electrical connection.
Avoid excessive bending or tension on the cable during installation to prevent internal conductor fatigue.
Follow standard industrial grounding practices to maintain system safety and compliance.
FAQWhat is the primary function of the 1756-CPR2 cable?The 1756-CPR2 is used to connect redundant power supplies to a ControlLogix chassis, allowing the system to switch to a backup power source if the primary supply fails, thereby preventing downtime.Is this cable compatible with all ControlLogix power supplies?This cable is specifically designed for use with ControlLogix redundant power supply systems. Always verify your specific power supply module compatibility in the product manual before installation.
نحن نقدم خدمة التوصيل في اليوم التالي من الاثنين إلى الجمعة إذا كان المنتج موجودًا في المخزون والاستثناءات في أيام العطلات.
عطلات نهاية الأسبوع
نحن لا نقدم أي تسليمات في عطلة نهاية الأسبوع.
دولي
نوفر خدمة التوصيل في اليوم التالي، حسب موقعك. تحقق من حالة طلبك عبر هذا الرابط.
The Allen-Bradley 1747-SCNR is a ControlNet Scanner module designed for the SLC 500 programmable logic controller platform. This module facilitates high-speed communication between the SLC 500 processor and other devices on a ControlNet network, supporting distributed I/O and peer-to-peer messaging.Features
Provides ControlNet connectivity for SLC 500 systems.
Equipped with two BNC connectors for redundant or standard network media configurations.
Supports high-speed data transfer and deterministic communication.
Designed for integration into standard SLC 500 chassis.
Technical Specifications
Model
1747-SCNR
Platform
SLC 500
Backplane Current
850mA at 5V DC
ControlNet Ports
2 x BNC connectors
Network Power
24V DC (External)
Operating Temperature
0 degC to 60 degC
Relative Humidity
5-95% non-condensing
Installation Guidelines
Ensure the SLC 500 chassis power is disconnected before installing or removing the module.
Slide the module into an available slot in the chassis and secure it using the provided retention screws.
Use appropriate ControlNet-rated coaxial cable and BNC connectors to ensure network integrity.
Maintain proper grounding practices for the ControlNet network to prevent signal interference.
Ensure adequate ventilation around the chassis to maintain operating temperatures within the 0-60 degC range.
FAQIs the 1747-SCNR still in production? No, this module has been discontinued by the manufacturer. We supply tested, reliable units to support legacy system maintenance.What is the primary function of this module? The 1747-SCNR acts as a scanner on a ControlNet network, allowing an SLC 500 controller to manage and exchange data with remote I/O and other controllers.
