Explore a full range of industrial automation products from major brands like ABB, Bently, Honeywell, GE, and more. IndustriaX Limited helps manufacturers source rare and hard-to-find components worldwide with fast delivery to minimize downtime.
3 in stock
Delivery within 48 hours, pay afterwards
Mid weeks Monday to friday we offer next day delivery if the product is on stock and exceptions on holidays.
Weekends We offer no deliveries in the weekends.
International Depending on where you’re located, we offer next day delivery. Check your status on this link
Description
The Allen-Bradley 1746-SIM is an essential diagnostic accessory engineered for the SLC 500 control system. This input simulator module provides a reliable method for testing and validating PLC ladder logic and application code without requiring physical field sensors or switches connected to the I/O rack. Featuring 16 integrated toggle switches, the unit allows maintenance personnel and system integrators to manually trigger discrete input bits, facilitating efficient commissioning and troubleshooting in both laboratory and field environments.
Features
16 individual toggle switches for manual input simulation.
Designed specifically for 24V DC sinking and sourcing I/O modules.
High-reliability gold-plated contacts to ensure consistent signal integrity.
Compact design for direct integration with the SLC 500 I/O platform.
Supports rapid testing of complex control sequences during the development phase.
Applications
This simulator is primarily used during the initial stages of machine development, debugging of PLC programs, and as a portable field tool for diagnostic testing. It is compatible with 24V DC modules, including the 1746-IB16, 1746-ITB16, 1746-IV16, 1746-ITV16, and 1746-IN16 series.
Technical Specifications
Brand
Allen-Bradley
Product Series
SLC 500
Device Category
I/O Simulator
Channel Count
16
Voltage Rating
24V DC
Backplane Current (5V DC)
215 mA
Update Time
2 ms
Operating Temperature
0 to 60 degC
Storage Temperature
-40 to 85 degC
Relative Humidity
5% to 95% (non-condensing)
Installation Guidelines
Ensure the PLC system is powered down before attempting to attach or remove the simulator module.
This module is intended strictly for 24V DC circuits; do not attempt to use it with high-voltage AC modules, as this will result in immediate hardware failure and safety hazards.
Align the connector pins carefully with the target I/O module to prevent bent pins or improper seating.
Verify that the module is securely fastened to the I/O module faceplate before reapplying power.
Store in a dry, static-controlled environment when not in active use to protect the contact surfaces.
FAQ
Can I use this module with AC input cards?No, the 1746-SIM is designed exclusively for 24V DC sinking and sourcing modules. Using it with AC modules will likely cause damage to the simulator and the PLC hardware.
Does this module require external power?The 1746-SIM draws its required operating power directly from the SLC 500 backplane (215 mA at 5V DC).
3 in stock
Delivery within 48 hours, pay afterwards
Mid weeks Monday to friday we offer next day delivery if the product is on stock and exceptions on holidays.
Weekends We offer no deliveries in the weekends.
International Depending on where you’re located, we offer next day delivery. Check your status on this link
3 in stock
Delivery within 48 hours, pay afterwards
Mid weeks Monday to friday we offer next day delivery if the product is on stock and exceptions on holidays.
Weekends We offer no deliveries in the weekends.
International Depending on where you’re located, we offer next day delivery. Check your status on this link
The General Electric IC670MDL644 is a high-performance 24VDC discrete input module designed for the GE Field Control distributed I/O system. This fast-response module features 16 input points capable of supporting both positive and negative logic configurations, making it a versatile solution for complex industrial automation environments.Features
16 discrete input channels for high-density signal monitoring.
Supports both positive and negative (sink/source) logic input types.
Fast response times with a typical ON delay of 25µs.
Integrated LED status indicators for each input point and a dedicated power status LED.
Robust isolation: 250 VAC continuous user-to-logic isolation and 1500 VAC user-to-frame ground isolation.
Designed for integration with the GE Field Control Bus Interface Unit (BIU).
Technical Specifications
Model Number
IC670MDL644
Input Points
16
Rated Voltage
24 VDC
Input Voltage Range
0 to 30 VDC
Input Impedance
3K Ohms typical
Logic Thresholds
Positive: +15V to +30V; Negative: -15V to -30V
Current Consumption
80 mA from Bus Interface Unit
On Response Time
25µs typical (60µs max)
Weight
0.22 kg
Applications
Automotive assembly line monitoring and quality control checkpoints.
Oil and gas sector for monitoring valve positions and field device status.
High-speed food and beverage packaging lines requiring fast signal throughput.
Municipal water treatment facilities for pump station and sensor telemetry.
Installation Guidelines
Ensure all power is disconnected from the I/O rack before installing or removing the module.
To install, tilt the terminal block and hook the rear tabs onto the DIN rail.
Pivot the module downward until the spring-loaded latch securely clicks into position.
Tighten the DIN rail clamp screw to ensure the module is firmly fixed and to prevent vibration-induced movement.
Maintain proper clearance for cooling and ensure that shielded cabling is used to minimize EMI interference in high-noise environments.
FAQWhat is the primary function of the IC670MDL644?This module acts as a bridge between field devices, such as limit switches or pushbuttons, and the control system, converting 24VDC signals into digital data for the Bus Interface Unit.Does this module require external power?Yes, while the module draws logic power from the Bus Interface Unit, an external 24VDC power supply is required to energize the field-side input devices.Can this module be used for both sink and source inputs?Yes, the IC670MDL644 is designed to handle both positive and negative logic, allowing it to interface with a wide range of field sensor configurations.
3 in stock
Delivery within 48 hours, pay afterwards
Mid weeks Monday to friday we offer next day delivery if the product is on stock and exceptions on holidays.
Weekends We offer no deliveries in the weekends.
International Depending on where you’re located, we offer next day delivery. Check your status on this link
1 in stock
Delivery within 48 hours, pay afterwards
Mid weeks Monday to friday we offer next day delivery if the product is on stock and exceptions on holidays.
Weekends We offer no deliveries in the weekends.
International Depending on where you’re located, we offer next day delivery. Check your status on this link
DescriptionThe Siemens R15E02-A186 is a robust PC board module designed for integration within industrial PLC and machine control architectures. This specialized interface board serves as a critical component in maintaining signal integrity and facilitating communication between the central processor and field-level instrumentation. Engineered for durability in demanding industrial settings, such as chemical processing and metal manufacturing, the R15E02-A186 is a vital replacement part for legacy automation systems requiring high-reliability hardware.Features
Compact, single-slot PC board architecture designed for efficient cabinet space utilization.
Integrated screw terminal interface for secure, vibration-resistant direct field wiring.
Advanced circuitry layout optimized for noise rejection and signal stability in high-EMI environments.
Direct-termination design reduces the need for external terminal blocks, minimizing potential failure points.
Supports high-accuracy data transmission with minimal latency for real-time control applications.
ApplicationsThis module is widely utilized in industrial automation environments where precise signal conditioning and reliable I/O handling are required. It is commonly found in refineries, chemical plants, and heavy manufacturing facilities that rely on established Siemens control hardware to manage complex production processes.Technical Specifications
Model
R15E02-A186
Brand
Siemens
Module Type
PC Board PLC / Add-On Board
Connection Method
Integrated Screw Terminals
Operating Temperature
0 to 60 deg C
Storage Temperature
-40 to 70 deg C
Installation Type
Internal PC Board / Rack Mount
Installation Guidelines
Ensure all power is disconnected from the PLC rack before attempting to insert or remove the module.
Handle the module using proper ESD (Electrostatic Discharge) precautions to prevent damage to sensitive internal circuitry.
Verify that the module is fully seated in the designated slot and that all screw terminals are tightened to the specified torque to ensure a stable connection.
Route field wiring away from high-voltage power cables to minimize electromagnetic interference (EMI).
Maintain adequate ventilation within the control cabinet to ensure the module operates within its specified temperature range.
FAQIs the R15E02-A186 compatible with modern Siemens systems?The R15E02-A186 is typically intended for legacy automation infrastructure. We recommend verifying your specific PLC backplane compatibility and part revision before installation.Does this module require external terminal blocks?No, the R15E02-A186 features integrated screw terminals, allowing for direct field wiring to the board, which helps reduce the overall footprint in the control cabinet.
1 in stock
Delivery within 48 hours, pay afterwards
Mid weeks Monday to friday we offer next day delivery if the product is on stock and exceptions on holidays.
Weekends We offer no deliveries in the weekends.
International Depending on where you’re located, we offer next day delivery. Check your status on this link
8 in stock
Delivery within 48 hours, pay afterwards
Mid weeks Monday to friday we offer next day delivery if the product is on stock and exceptions on holidays.
Weekends We offer no deliveries in the weekends.
International Depending on where you’re located, we offer next day delivery. Check your status on this link
The Schneider 490NRP25400 is a dedicated fiber optic repeater module designed for the Modicon Quantum automation series. This unit is engineered to extend the reach of Remote I/O (RIO) and Modbus Plus networks by converting electrical signals into optical pulses. By utilizing fiber optic transmission, the module provides essential galvanic isolation, which protects sensitive control equipment from electromagnetic interference (EMI) and ground loops common in high-voltage industrial environments.Features
Supports multi-mode fiber optic communication (62.5/125 or 50/125 micrometers).
Equipped with ST connectors for secure and reliable optical coupling.
Transparent operation: requires no complex software configuration for data stream repetition.
Dual optical ports enable flexible network topologies, including point-to-point and star configurations.
Integrated status LEDs provide real-time diagnostic feedback for link monitoring and fault isolation.
Reduces signal degradation and timing jitter, supporting high-precision process synchronization.
ApplicationsThis repeater is ideal for large-scale distributed control architectures found in petrochemical refineries, power generation facilities, and mining operations. It is specifically suited for bridging communication between distant Quantum racks where copper cabling would be susceptible to electrical noise or exceed distance limitations.Technical Specifications
Model
490NRP25400
Brand
Schneider Electric / Modicon
Protocol
Modbus Plus / Remote I/O (RIO)
Fiber Type
Multi-mode
Wavelength
820 nm
Max Distance
3 km
Interface
ST Connectors
Power Consumption
250 mA at 5 VDC
Power Dissipation
1.25 W
Isolation
500 VDC
Operating Temperature
0 to 60 deg C
Humidity
5 to 95 percent (non-condensing)
Installation Guidelines
The module occupies a single slot on a standard Modicon Quantum backplane.
Power is supplied directly through the backplane; no external DC power source is required.
Ensure the fiber optic cable bend radius is maintained according to manufacturer specifications to prevent signal attenuation at the ST interface.
Always power down the rack before inserting or removing the module to prevent electrical damage.
Avoid routing fiber optic cables alongside high-voltage power lines to maintain signal integrity.
FAQDoes this module require software setup?No, the 490NRP25400 operates transparently on the network layer and does not require software configuration.What is the maximum distance supported?The module supports distances up to 3 km, depending on the specific attenuation characteristics of the fiber optic cable used.Can this module be used in high-vibration areas?Yes, the module is designed to meet industrial standards for vibration and shock resistance, making it suitable for installation near heavy machinery.
8 in stock
Delivery within 48 hours, pay afterwards
Mid weeks Monday to friday we offer next day delivery if the product is on stock and exceptions on holidays.
Weekends We offer no deliveries in the weekends.
International Depending on where you’re located, we offer next day delivery. Check your status on this link
1 in stock
Delivery within 48 hours, pay afterwards
Mid weeks Monday to friday we offer next day delivery if the product is on stock and exceptions on holidays.
Weekends We offer no deliveries in the weekends.
International Depending on where you’re located, we offer next day delivery. Check your status on this link
Product OverviewThe Triconex 7400028-100, designated as Model 8101, serves as a 15-slot expansion chassis specifically engineered for the Triconex Triple Modular Redundancy (TMR) safety instrumented systems. This robust hardware platform enables the expansion of I/O capacity in demanding industrial environments, including petrochemical processing, power generation, and critical infrastructure control. By providing a stable physical and electrical foundation, this chassis allows for the seamless integration of additional I/O modules into the existing safety architecture, ensuring high system availability and fault tolerance.Features
Designed for high-density I/O expansion in TMR safety systems.
Supports 15 slots for flexible module configuration.
Engineered with a passive backplane to enhance reliability and MTBF by removing active bus components.
Facilitates hot-swapping, allowing for module replacement or system expansion during active process operation.
Integrated dual-power rail distribution supports redundant power supply modules for increased uptime.
Physical slot keying ensures correct module alignment and prevents insertion errors.
ApplicationsThis expansion chassis is widely utilized in safety-critical applications where process continuity is paramount. It is commonly deployed in emergency shutdown (ESD) systems, burner management systems (BMS), and high-integrity pressure protection systems (HIPPS) where the Triconex TMR architecture is required to mitigate risks and protect plant assets.Technical Specifications
Model
7400028-100 (Model 8101)
Slot Capacity
15 Slots
Input Voltage Range
24 to 120 VDC
Current Rating
2 to 10 A
Operating Temperature
0 to 60 deg C
Installation Guidelines
Ensure the chassis is mounted in a clean, dry, and vibration-dampened environment consistent with industrial safety standards.
Maintain adequate clearance around the chassis to allow for proper airflow and cooling, preventing thermal throttling or hardware degradation.
Verify that all power sources are disconnected before installing or removing the chassis from the cabinet.
Use appropriate grounding procedures to connect the chassis frame to the system common ground to mitigate EMI/RFI interference.
Ensure all redundant power supply modules are correctly seated and keyed before applying power to the bus.
Perform a system verification check after hot-swapping any module to confirm proper communication with the Main Processor (MP).
FAQIs this chassis compatible with all Tricon series modules?The 7400028-100 is designed for the Tricon TMR system. Please consult your specific system documentation or the Triconex product catalog to ensure module compatibility based on your current firmware and processor generation.Does the chassis include power supplies?The 7400028-100 is the expansion chassis frame. Redundant power supply modules are typically ordered separately to meet specific power budget requirements for your I/O configuration.
1 in stock
Delivery within 48 hours, pay afterwards
Mid weeks Monday to friday we offer next day delivery if the product is on stock and exceptions on holidays.
Weekends We offer no deliveries in the weekends.
International Depending on where you’re located, we offer next day delivery. Check your status on this link
9 in stock
Delivery within 48 hours, pay afterwards
Mid weeks Monday to friday we offer next day delivery if the product is on stock and exceptions on holidays.
Weekends We offer no deliveries in the weekends.
International Depending on where you’re located, we offer next day delivery. Check your status on this link
DescriptionThe Triconex 4000056-006 is a robust, 6-foot (1.83-meter) cable assembly designed for seamless integration within Triconex safety instrumented systems. Engineered for reliability in demanding industrial settings, this quick-disconnect (QD) cable facilitates secure signal transmission between field-level sensors, switches, and system I/O modules. The assembly is constructed to maintain signal integrity in environments prone to mechanical vibration and electromagnetic interference, supporting the stringent requirements of SIL 3 safety architectures by ensuring consistent, low-latency connectivity.Features
Quick Disconnect Interface: Features a 5-pin configuration for rapid installation and field replacement, reducing mean time to repair (MTTR).
Signal Integrity: High-grade shielding and insulation protect against environmental noise and signal degradation.
Safety-Critical Design: Specifically engineered for compatibility with Triconex safety ecosystems to prevent intermittent faults.
Robust Construction: Built to endure the mechanical stresses of industrial plant operations.
ApplicationsThis cable assembly is intended for use in mission-critical safety applications, including but not limited to chemical and petrochemical processing, power generation facilities, and wastewater treatment plants where reliable sensor-to-controller communication is paramount.Technical Specifications
Model Number
4000056-006
Connector Type
5-pin Quick Disconnect (QD)
Cable Length
6 feet (1.83 meters)
Operating Temperature
-25 to 70 deg C
Application
Sensors and Switches Cord Set
Installation Guidelines
Ensure the system is powered down before connecting or disconnecting the cable assembly to prevent electrical arcing or damage to I/O module pins.
Verify that the 5-pin keying is properly aligned before engaging the connector to avoid damaging the internal contacts.
Route cables away from high-voltage power lines and sources of extreme heat to maintain signal shielding effectiveness.
Secure the cable with appropriate strain relief to prevent mechanical tension on the connector interface.
Regularly inspect the connector housing for signs of corrosion or physical damage, particularly in harsh or corrosive environments.
FAQIs this cable compatible with all Triconex systems?The 4000056-006 is designed for use within the Triconex ecosystem using 5-pin QD interfaces. Please verify your specific I/O module pinout and connector requirements against your system documentation to ensure full compatibility.What is the length of this specific model?The -006 suffix indicates a cable length of 6 feet (1.83 meters).
9 in stock
Delivery within 48 hours, pay afterwards
Mid weeks Monday to friday we offer next day delivery if the product is on stock and exceptions on holidays.
Weekends We offer no deliveries in the weekends.
International Depending on where you’re located, we offer next day delivery. Check your status on this link
1 in stock
Delivery within 48 hours, pay afterwards
Mid weeks Monday to friday we offer next day delivery if the product is on stock and exceptions on holidays.
Weekends We offer no deliveries in the weekends.
International Depending on where you’re located, we offer next day delivery. Check your status on this link
The Honeywell 8C-TAIXB1 (51307129-175) is a high-level analog input (HLAI) IOTA module designed for the Experion LX distributed control system. This 16-channel assembly features conformal coating for enhanced durability in industrial environments and supports both redundant and non-redundant configurations. The module is engineered for efficient process monitoring, providing integrated excitation power to eliminate the need for external marshalling power supplies.Features
High-Density I/O: Supports 16 analog input channels for 4-20 mA signals.
Integrated Power Management: Features on-board excitation power, simplifying field wiring and reducing installation complexity.
Advanced Diagnostics: Includes extensive built-in self-diagnostics to ensure system integrity and rapid fault identification.
Galvanic Isolation: Provides electrical isolation to protect sensitive control circuitry from field-side disturbances.
Flexible Configuration: Supports internal or external field power selection and optional redundancy for critical control loops.
Environmental Protection: Coated circuitry provides increased resistance to harsh industrial conditions.
Technical Specifications
Model Number
8C-TAIXB1
Part Number
51307129-175
Input Channels
16
Input Signal Range
4-20 mA
A/D Converter Resolution
16 bits
Input Scan Rate
50 ms
Voltage Rating
24 VDC
Module Current Rating
105 mA
Normal Mode Rejection (60 Hz)
19 dB
Operating Temperature
0 to 60 degC
Storage Temperature
-40 to 85 degC
Installation Guidelines
Ensure the control system is powered down before installing or removing the IOTA module to prevent electrical damage.
Verify that the module is properly seated in the rack assembly and secured using the provided mounting hardware.
Use shielded twisted-pair cabling for all analog input signals to minimize electromagnetic interference (EMI).
Maintain proper grounding practices according to Honeywell Experion installation standards to ensure signal accuracy and safety.
Ensure adequate airflow around the module to keep operating temperatures within the specified 0 to 60 degC range.
FAQDoes this module support redundancy? Yes, the 8C-TAIXB1 supports optional redundancy configurations within the Experion LX architecture.Is external power required for the field instruments? This module provides on-board excitation power, which often removes the requirement for external marshalling power supplies for standard field devices.What is the purpose of the conformal coating? The coating provides a protective barrier against moisture, dust, and corrosive elements, extending the lifespan of the module in demanding industrial process environments.
1 in stock
Delivery within 48 hours, pay afterwards
Mid weeks Monday to friday we offer next day delivery if the product is on stock and exceptions on holidays.
Weekends We offer no deliveries in the weekends.
International Depending on where you’re located, we offer next day delivery. Check your status on this link
10 in stock
Delivery within 48 hours, pay afterwards
Mid weeks Monday to friday we offer next day delivery if the product is on stock and exceptions on holidays.
Weekends We offer no deliveries in the weekends.
International Depending on where you’re located, we offer next day delivery. Check your status on this link
The Triconex 3000604-100 is a robust, high-density chassis designed specifically for Invensys Triconex safety systems. This unit functions as the primary or expansion infrastructure, providing the necessary mechanical support and electrical backplane connectivity for Triple Modular Redundancy (TMR) architectures. It is engineered to maintain system stability in demanding industrial environments, including petrochemical plants, offshore energy installations, and large-scale manufacturing facilities where safety instrumented functions (SIF) are critical.Features
Supports TMR (Triple Modular Redundancy) architecture for high-availability safety applications.
High-speed passive backplane ensures reliable communication between Main Processors and I/O modules.
Dual-power rail design facilitates redundant power supply configurations.
Integrated shielding per slot to mitigate electromagnetic interference (EMI) between logic and field signals.
Constructed from industrial-grade reinforced steel and aluminum alloy for long-term structural integrity.
Designed for SIL 3 compliance environments.
ApplicationsThis chassis is intended for use in mission-critical safety systems requiring high fault tolerance and continuous operation. It is commonly deployed in emergency shutdown systems (ESD), burner management systems (BMS), and process control applications where unplanned downtime must be strictly avoided.Technical Specifications
Model
3000604-100
Manufacturer
Invensys Triconex
Material
Reinforced Steel/Aluminum Alloy
Operating Temperature
0 to 60 deg C
Weight
24.9 kg
Installation Guidelines
Ensure the chassis is mounted in a clean, vibration-free environment with adequate airflow for thermal dissipation.
Verify that all power modules are seated correctly to utilize the dual-power rail design.
Always power down the system before inserting or removing any modules to prevent electrical arcing or damage to the backplane pins.
Ensure proper chassis grounding to the cabinet earth bus to maintain signal integrity and EMI protection.
Handle modules using ESD-safe procedures to protect sensitive electronic components during installation or maintenance.
FAQIs the 3000604-100 compatible with all Triconex modules?This chassis is designed to support standard Tricon modular configurations. Please verify specific module compatibility against your system's hardware revision requirements.Does this chassis include power supplies?No, the 3000604-100 is the mechanical and backplane chassis only. Power supply modules must be ordered and installed separately.
10 in stock
Delivery within 48 hours, pay afterwards
Mid weeks Monday to friday we offer next day delivery if the product is on stock and exceptions on holidays.
Weekends We offer no deliveries in the weekends.
International Depending on where you’re located, we offer next day delivery. Check your status on this link
1 in stock
Delivery within 48 hours, pay afterwards
Mid weeks Monday to friday we offer next day delivery if the product is on stock and exceptions on holidays.
Weekends We offer no deliveries in the weekends.
International Depending on where you’re located, we offer next day delivery. Check your status on this link
System OverviewThe Triconex 8111 High Density Main Chassis acts as the foundational infrastructure for Triple Modular Redundant (TMR) safety systems. Engineered for high-availability environments, this chassis provides the physical mounting and electrical backplane necessary to host Triconex control processors and I/O modules. It is specifically designed to support SIL 3 safety integrity requirements in demanding industries such as oil and gas, power generation, and chemical processing, ensuring reliable operation through robust, vibration-resistant construction.Architectural FeaturesThe 8111 chassis utilizes a passive backplane design that facilitates seamless, low-latency communication between triplicated controller sets. It supports dual-redundant power supplies, ensuring that the critical internal logic bus remains powered during potential power source interruptions. The high-density layout allows for efficient module packing, which optimizes cabinet space while maintaining sufficient thermal management for continuous operation. The metallic chassis also serves as a protective enclosure, offering shielding against electromagnetic interference (EMI) in harsh industrial settings.Technical Specifications
Model
8111
Brand
Invensys Triconex
Module Capacity
Triconex TMR Series modules
Operating Temperature
0 to 60 deg C
Storage Temperature
-40 to 85 deg C
Relative Humidity
5-95 percent non-condensing
Mounting
19-inch Rack Mount or Panel Mount
Installation Guidelines
Ensure the chassis is mounted in a clean, dry environment within an appropriately rated industrial cabinet.
Verify that the mounting surface is level and capable of supporting the static load of the chassis and installed modules.
Maintain adequate clearance around the chassis to facilitate proper airflow and thermal dissipation.
Always power down the chassis and associated power supplies before inserting or removing any I/O or processor modules.
Use proper grounding techniques for the chassis frame to ensure effective EMI shielding and electrical safety.
Handle modules with care to avoid damaging the backplane connectors or card guide alignments.
FAQIs the 8111 chassis compatible with all Triconex modules? The 8111 is designed for the Triconex TMR series; please verify specific module compatibility with your system revision.Does this chassis support redundant power? Yes, the 8111 is engineered to accommodate dual-redundant power supply modules to maintain continuous system uptime.What is the primary function of the passive backplane? The passive backplane provides the physical connectivity for the triplicated system, ensuring zero-latency communication between redundant controller sets without the risk of active component failure on the bus.
1 in stock
Delivery within 48 hours, pay afterwards
Mid weeks Monday to friday we offer next day delivery if the product is on stock and exceptions on holidays.
Weekends We offer no deliveries in the weekends.
International Depending on where you’re located, we offer next day delivery. Check your status on this link
2 in stock
Delivery within 48 hours, pay afterwards
Mid weeks Monday to friday we offer next day delivery if the product is on stock and exceptions on holidays.
Weekends We offer no deliveries in the weekends.
International Depending on where you’re located, we offer next day delivery. Check your status on this link
Description
The Woodward 9905-002N is an SPMA (Synchronizer and Phase Matching) control module engineered for the precise synchronization of AC generators to a utility grid or common bus. Rated for 230 V, 60 Hz operations, this unit automates the critical process of matching generator frequency, phase angle, and voltage before the circuit breaker closes. By providing automated control, the 9905-002N significantly reduces the risk of out-of-phase closure, protecting prime movers and electrical switchgear from severe mechanical and electrical transients.
Features
Internal phase-lock loop (PLL) circuitry for real-time phase angle monitoring.
Adjustable setpoints for phase window and dwell time to accommodate varying load dynamics.
Proportional bias output signal for seamless integration with engine governor systems.
Ruggedized construction designed for reliable operation in high-vibration industrial environments.
High electromagnetic interference (EMI) immunity for stable performance in power generation facilities.
Applications
This synchronizer is widely deployed in mission-critical power management environments, including:
Industrial power generation and cogeneration plants.
Standby and emergency power systems for refineries and chemical processing facilities.
Microgrid management for mining operations and remote sites.
Technical Specifications
Model
9905-002N
Brand
Woodward
Device Type
SPMA Synchronizer Control
Input Voltage
230 V
Frequency
60 Hz
Power Consumption
10 W
Operating Temperature
-40 to +70 deg C
Storage Temperature
-55 to +85 deg C
Weight
1.88 kg
Installation Guidelines
Ensure the system power is completely disconnected before installing or removing the module.
Mount in a clean, dry, and vibration-dampened control panel enclosure.
Maintain adequate clearance around the unit for proper thermal dissipation.
Use shielded, twisted-pair cabling for all analog inputs to minimize noise pickup.
Verify that the ground connection is secure to maintain EMI protection integrity.
Confirm that the phase-matching logic settings align with site-specific generator and bus requirements before commissioning.
FAQ
What is the primary function of the 9905-002N?The 9905-002N acts as an automated synchronizer that manages the frequency, voltage, and phase matching of a generator to a bus, ensuring safe and stable circuit breaker closure.
Is this module suitable for high-vibration environments?Yes, the 9905-002N is built with a ruggedized industrial design capable of maintaining logic stability in harsh engine room conditions.
2 in stock
Delivery within 48 hours, pay afterwards
Mid weeks Monday to friday we offer next day delivery if the product is on stock and exceptions on holidays.
Weekends We offer no deliveries in the weekends.
International Depending on where you’re located, we offer next day delivery. Check your status on this link
4 in stock
Delivery within 48 hours, pay afterwards
Mid weeks Monday to friday we offer next day delivery if the product is on stock and exceptions on holidays.
Weekends We offer no deliveries in the weekends.
International Depending on where you’re located, we offer next day delivery. Check your status on this link
The Siemens 6AV3607-1JC20-0AX1 is a SIMATIC OP7/DP operator panel designed for human-machine interface (HMI) tasks within industrial automation environments, specifically optimized for integration with SIMATIC S7 control systems. Although this unit was officially discontinued by the manufacturer on October 1, 2018, it remains a critical component for maintaining legacy automation architectures.Features
High-contrast LC display with integrated LED backlighting for clear visibility in various lighting conditions.
Four-line display configuration featuring 20 characters per line.
Character height of 8 mm for improved readability.
Dedicated PROFIBUS-DP communication interface for robust industrial networking.
Compact design suitable for panel-mount applications.
Technical Specifications
Model
6AV3607-1JC20-0AX1
Product Type
Operator Panel (OP7/DP)
Supply Voltage
24 VDC
Current Consumption
0.24 A
Display Type
LC Display with LED Backlight
Capacity
4 lines, 20 characters per line
Communication
PROFIBUS-DP
Status
Discontinued (01.10.2018)
Installation Guidelines
Ensure the control panel or enclosure is properly prepared for the mounting cutout dimensions before installation.
Verify that the supply voltage is strictly 24 VDC and that the power source is regulated to prevent damage to the internal electronics.
Use shielded cabling for the PROFIBUS-DP connection to minimize electromagnetic interference (EMI) in high-noise industrial environments.
Ensure adequate ventilation around the unit to maintain optimal operating temperatures.
Always disconnect power before performing any wiring, maintenance, or module replacement to prevent electrical hazards.
FAQIs this unit compatible with modern TIA Portal software?The OP7/DP is a legacy device. Compatibility with modern software suites is limited; it is typically programmed using older versions of SIMATIC ProTool or STEP 7. Please verify your specific project requirements before purchase.What is the primary communication protocol for this model?This specific model utilizes the PROFIBUS-DP protocol for data exchange with PLCs and other industrial controllers.Is this product refurbished or new?This listing refers to the Siemens 6AV3607-1JC20-0AX1, which is a discontinued legacy part. Please contact our sales team regarding the specific condition of current inventory.
4 in stock
Delivery within 48 hours, pay afterwards
Mid weeks Monday to friday we offer next day delivery if the product is on stock and exceptions on holidays.
Weekends We offer no deliveries in the weekends.
International Depending on where you’re located, we offer next day delivery. Check your status on this link
2 in stock
Delivery within 48 hours, pay afterwards
Mid weeks Monday to friday we offer next day delivery if the product is on stock and exceptions on holidays.
Weekends We offer no deliveries in the weekends.
International Depending on where you’re located, we offer next day delivery. Check your status on this link
DescriptionThe Allen-Bradley 1746-OV8 is a high-performance digital DC output module engineered for the SLC 500 programmable controller platform. This unit provides eight discrete sinking outputs, specifically designed to handle high-current requirements for field devices operating within the 10V to 50V DC range. By controlling the negative side of the load circuit, this module ensures efficient switching by connecting the load directly to the common rail during the energized state.Features
Eight isolated sinking output channels grouped together for efficient wiring.
Rapid switching performance with an ON-signal delay of 0.1 ms and an OFF-signal delay of 1.0 ms.
Wide operating voltage range of 10-50V DC, supporting diverse industrial load requirements.
Integrated status indicators for local monitoring of output channel states.
Robust SLC 500 backplane interface requiring 135 mA at 5V DC.
Technical Specifications
Brand
Allen-Bradley
Series
SLC 500
Module Type
Digital DC Output (Sinking)
Number of Outputs
8
Operating Voltage
10-50V DC
Backplane Current (5V)
135 mA
Backplane Current (24V)
0 mA
On-Signal Delay
0.1 ms
Off-Signal Delay
1.0 ms
Operating Temperature
0 to 60 degC
Storage Temperature
-40 to 85 degC
Relative Humidity
5% to 95% (non-condensing)
Installation Guidelines
Ensure the SLC 500 chassis power is disconnected before installing or removing the module to prevent electrical damage.
Verify that the module is firmly seated into the chassis slot and secured using the top and bottom mounting screws.
Use appropriate wire gauges for field connections and ensure all wiring is routed away from high-voltage AC lines to minimize electromagnetic interference.
Maintain adequate ventilation within the enclosure to keep ambient temperatures within the specified 0 to 60 degC operating range.
Follow standard ESD protection procedures when handling the module to prevent circuit board damage.
Compliance and CertificationsThe 1746-OV8 is designed for compliance with global industrial standards, including UL, C-UL, CE, and C-Tick. It is rated for use in Class I, Division 2, Groups A, B, C, and D hazardous locations.FAQWhat does it mean that this is a sinking module?A sinking output module connects the load to the common (negative) side of the power supply when the output is active. Ensure your field devices are compatible with sinking-type logic before installation.Can this module handle 48V DC loads?Yes, the 1746-OV8 supports a voltage range of 10V to 50V DC, making it suitable for standard 24V or 48V DC applications.
2 in stock
Delivery within 48 hours, pay afterwards
Mid weeks Monday to friday we offer next day delivery if the product is on stock and exceptions on holidays.
Weekends We offer no deliveries in the weekends.
International Depending on where you’re located, we offer next day delivery. Check your status on this link
8 in stock
Delivery within 48 hours, pay afterwards
Mid weeks Monday to friday we offer next day delivery if the product is on stock and exceptions on holidays.
Weekends We offer no deliveries in the weekends.
International Depending on where you’re located, we offer next day delivery. Check your status on this link
DescriptionThe Allen-Bradley 1746-P3 is a dedicated DC system power supply unit engineered for the SLC 500 controller series. This module is specifically designed to accept a 24V DC input, providing a reliable solution for applications where AC power is unavailable or unsuitable, such as remote solar installations, mobile machinery, or facilities utilizing a centralized 24V DC power architecture. It mounts directly into the SLC 500 chassis to deliver regulated backplane power to the processor and connected I/O modules.Features
Designed for 24V DC input environments with an operating range of 19.2 to 28.8V DC.
Provides 3.6A at 5V DC and 0.87A at 24V DC to the system backplane.
Features 600V AC RMS isolation voltage to enhance resilience against electrical noise.
Includes a user-replaceable 1746-F3 fuse for internal overcurrent protection.
Maintains system operation through minor power transients with a 5ms hold-up time.
Technical Specifications
Brand
Allen-Bradley
Series
SLC 500
Input Voltage
24V DC (19.2–28.8V DC range)
Output 1
3.6A @ 5V DC
Output 2
0.87A @ 24V DC
Input Power
61 Watts
Max Inrush Current
20.0 Amps
Operating Temperature
0 to 60 degC
Weight
0.60 kg
Installation Guidelines
The 1746-P3 must be installed in the far-left slot of the 1746 chassis.
Ensure the chassis power is disconnected before installing or removing the power supply module.
Verify that the input voltage source is within the specified 19.2–28.8V DC range to prevent damage.
Maintain adequate clearance around the module to facilitate natural convection cooling.
Use appropriate wire gauges for the DC input terminals and ensure all connections are securely tightened to prevent voltage drops.
Follow standard ESD precautions when handling the module to protect internal components.
FAQQ: Can I use this power supply with an AC input?A: No, the 1746-P3 is strictly designed for a 24V DC input. Using an AC source will damage the unit.Q: Where is this module installed in the rack?A: This power supply is designed to be installed in the far-left slot of the SLC 500 chassis.Q: Is the fuse replaceable?A: Yes, the 1746-P3 utilizes a 1746-F3 fuse which can be replaced if the module experiences an overcurrent event.
8 in stock
Delivery within 48 hours, pay afterwards
Mid weeks Monday to friday we offer next day delivery if the product is on stock and exceptions on holidays.
Weekends We offer no deliveries in the weekends.
International Depending on where you’re located, we offer next day delivery. Check your status on this link
DescriptionThe General Electric IS215VCMIH2C is a VME Communication Board designed for the Mark VI Control System. This module serves as a critical interface component within the GE Mark VI architecture, facilitating communication and data exchange across the VME bus. It is engineered to support the high-reliability requirements of industrial turbine and power generation control environments.Features
Designed specifically for the GE Mark VI Control System series.
Integrated status indicators including Run, Fail, Status, and Reset LEDs for rapid diagnostic assessment.
Standard VME bus interface for seamless integration into existing control racks.
Robust construction designed for long-term operational stability in industrial control rooms.
Technical Specifications
Part Number
IS215VCMIH2C
Manufacturer
General Electric
System Series
Mark VI
Product Type
VME Communication Board
Functional Abbreviation
VCMI
Weight
0.36 kg
Tariff Code
8537101190
Installation Guidelines
Ensure power is disconnected from the VME rack before attempting to insert or remove the VCMI module.
Handle the board by the edges to avoid electrostatic discharge (ESD) damage to sensitive onboard components.
Verify that the VME rack slot is clean and free of debris prior to installation.
Align the card carefully with the backplane connectors to prevent pin misalignment or damage.
Secure the module using the integrated faceplate screws to ensure proper grounding and mechanical stability.
Refer to GEH-6421 instruction manual for specific software configuration and jumper settings required for your application.
FAQWhat system is the IS215VCMIH2C compatible with?This board is a component of the General Electric Mark VI Control System.What do the onboard LEDs indicate?The LEDs provide visual feedback on the operational status of the board, including Run, Fail, Status, and Reset states.Is this a genuine GE part?Yes, this is an original GE Energy component for the Mark VI series.
6 in stock
Delivery within 48 hours, pay afterwards
Mid weeks Monday to friday we offer next day delivery if the product is on stock and exceptions on holidays.
Weekends We offer no deliveries in the weekends.
International Depending on where you’re located, we offer next day delivery. Check your status on this link
The Siemens 6GK1543-1AA01 is a legacy SIMATIC NET CP 5431 communications processor designed for industrial networking applications. As part of the SIMATIC S5 product family, this module facilitates robust connectivity for PROFIBUS FMS and DP protocols, ensuring reliable data exchange within automated manufacturing systems.Features
Supports PROFIBUS FMS and DP communication protocols.
Engineered for integration with SIMATIC S5 systems, including 115U/H, 135U, and 155U/H PLC series.
Provides high-performance communication processing for distributed I/O and networked controllers.
Robust industrial hardware architecture suitable for demanding plant environments.
ApplicationsThis communications processor is primarily utilized in legacy automation environments requiring reliable PROFIBUS connectivity. It serves as a critical interface for managing communication tasks between SIMATIC S5 controllers and field devices, supporting complex control architectures in process and discrete manufacturing.Technical Specifications
Manufacturer
Siemens
Product Model
6GK1543-1AA01
Module Type
Communications Processor (CP)
Series
SIMATIC NET / S5
Functionality
CP 5431 FMS/DP
Tariff Code
8537109060
Installation Guidelines
Ensure the PLC rack is powered down before inserting or removing the CP 5431 module to prevent electrical damage.
Verify that the module is correctly seated in the designated slot of the S5 rack to ensure proper backplane contact.
Use shielded PROFIBUS cabling to minimize electromagnetic interference (EMI) in high-noise industrial environments.
Maintain proper grounding practices for the rack and communication shields to preserve signal integrity.
Ensure adequate ventilation around the control cabinet to prevent heat buildup during continuous operation.
FAQIs the 6GK1543-1AA01 still in production?No, this module has been discontinued by the manufacturer. We provide high-quality surplus units to support the maintenance and longevity of your legacy S5 systems.What systems is this module compatible with?The CP 5431 is designed for compatibility with SIMATIC S5-115U/H, 135U, and 155U/H series controllers.
6 in stock
Delivery within 48 hours, pay afterwards
Mid weeks Monday to friday we offer next day delivery if the product is on stock and exceptions on holidays.
Weekends We offer no deliveries in the weekends.
International Depending on where you’re located, we offer next day delivery. Check your status on this link
3 in stock
Delivery within 48 hours, pay afterwards
Mid weeks Monday to friday we offer next day delivery if the product is on stock and exceptions on holidays.
Weekends We offer no deliveries in the weekends.
International Depending on where you’re located, we offer next day delivery. Check your status on this link
The Allen-Bradley 1746-OBP8 is a high-performance digital output module designed for the SLC 500 programmable logic controller system. Optimized for demanding industrial environments, this module provides eight sourcing output channels configured in two isolated groups of four. It is specifically built to handle high-current loads, making it an ideal choice for driving heavy-duty actuators, large solenoids, and high-wattage indicators that require more power than standard I/O modules can provide.Features
High Current Capacity: Delivers a continuous 2.0 Amps per point across the full operating temperature range (0 to 60 degC) without thermal derating.
Integrated Diagnostics: Includes e-fuse LED status indicators for each channel, enabling rapid visual fault detection and maintenance.
Isolated Architecture: Outputs are organized into two distinct isolated groups to enhance circuit protection and system flexibility.
Robust Power Handling: Capable of managing a total module current of 8.0 Amps, with a surge current capacity of 4.0 Amps per point for 10 ms.
Technical Specifications
Brand
Allen-Bradley
Series
SLC 500
Module Type
High-Current DC Sourcing Output
Number of Outputs
8 (2 groups of 4)
Operating Voltage
20.4 to 26.4V DC
Backplane Current (5V)
0.135 A
On-Signal Delay
1.0 ms
Off-Signal Delay
2.0 ms
Max On-State Voltage Drop
1.0V at 2.0 A
Max Off-State Leakage
1.0 mA
Min Load Current
1.0 mA
Installation Guidelines
Power Safety: Always disconnect backplane power before inserting or removing the module from the chassis to prevent electrical damage.
Mounting: Ensure the module is fully seated in the SLC 500 chassis slot and secured with the integrated locking tab.
Wiring: Utilize shielded cabling for output signals to minimize EMI interference, especially when driving inductive loads.
Environment: Maintain adequate clearance around the chassis to ensure proper ventilation and cooling, adhering to the 0 to 60 degC operating range.
Grounding: Follow standard industrial grounding practices for the chassis and power supply to ensure signal integrity and safety.
FAQWhat does the 'P' in 1746-OBP8 stand for? The 'P' designates this module as a high-power output variant, specifically engineered to drive larger electrical loads compared to standard SLC 500 output modules.Does this module require thermal derating? No, the 1746-OBP8 is rated for a continuous 2.0 Amps per point across its entire specified operating temperature range of 0 to 60 degC.
3 in stock
Delivery within 48 hours, pay afterwards
Mid weeks Monday to friday we offer next day delivery if the product is on stock and exceptions on holidays.
Weekends We offer no deliveries in the weekends.
International Depending on where you’re located, we offer next day delivery. Check your status on this link
6 in stock
Delivery within 48 hours, pay afterwards
Mid weeks Monday to friday we offer next day delivery if the product is on stock and exceptions on holidays.
Weekends We offer no deliveries in the weekends.
International Depending on where you’re located, we offer next day delivery. Check your status on this link
The Triconex 4107 Enhanced Intelligent Communication Module is a specialized interface component designed for integration within Triconex Triple Modular Redundant (TMR) safety systems. This module acts as a high-performance bridge between the safety controller and external supervisory networks, ensuring that safety-critical data is transmitted reliably while maintaining the deterministic performance required for SIL 3-rated safety instrumented systems.Features
Dedicated onboard processing for efficient protocol management and data handling.
Offloads communication overhead from the main safety processor to maintain optimal scan times.
Supports redundant network configurations to prevent single points of failure.
Integrated diagnostic monitoring for continuous verification of link layer and data integrity.
Front-panel status indicators for immediate visual feedback on module health and network activity.
Designed for high-availability environments where latency and data reliability are critical.
ApplicationsThe 4107 is widely deployed in mission-critical industrial sectors, including petrochemical facilities, oil and gas offshore platforms, and power generation plants. It is primarily used to facilitate communication between Triconex safety PLCs and plant-wide DCS or HMI systems, ensuring consistent monitoring and control of safety-related processes.Technical Specifications
Model
4107
Brand
Triconex
Module Type
Enhanced Intelligent Communication Module
Operating Temperature
0 to 60 deg C
Input Voltage
24 VDC Nominal
Power Consumption
10 W (Typical)
Processor
Dedicated Intelligent Communication Processor
Installation Guidelines
Ensure the Triconex system is powered down before inserting or removing the 4107 module to prevent electrical damage.
Verify that the module is correctly seated in the designated chassis slot to ensure proper backplane connection.
Use shielded communication cabling to minimize EMI interference in high-noise industrial environments.
Maintain proper ventilation in the equipment cabinet to ensure the module operates within the specified 0 to 60 deg C temperature range.
Follow standard ESD (Electrostatic Discharge) precautions when handling the module to protect sensitive internal circuitry.
FAQQ: Is the 4107 module compatible with all Triconex TMR systems?A: The 4107 is designed for specific Triconex architectures. Please verify your system's hardware configuration and compatibility requirements before installation.Q: What protocols are supported by the 4107?A: This module supports various communication protocols, including Modbus and Ethernet/IP, to facilitate seamless data exchange between the safety controller and external supervisory systems.Q: Does this module require specialized configuration?A: Yes, the 4107 requires configuration within the Triconex software environment to define communication parameters, network addresses, and data mapping for your specific application.
6 in stock
Delivery within 48 hours, pay afterwards
Mid weeks Monday to friday we offer next day delivery if the product is on stock and exceptions on holidays.
Weekends We offer no deliveries in the weekends.
International Depending on where you’re located, we offer next day delivery. Check your status on this link
DescriptionThe Foxboro CP60, identified by part number P0961FR, serves as a high-performance control processor within the I/A Series distributed control system (DCS). This module is engineered to perform high-speed regulatory, logic, and algebraic control functions, ensuring process stability in mission-critical applications. It acts as the primary computational engine for station-level control, managing the flow of data between field I/O subsystems and the broader plant production network. Its robust design is tailored for demanding environments, including power generation, petrochemical processing, and oil and gas refining.Features
High-speed deterministic execution for complex control algorithms.
Supports dual-redundant configurations for seamless failover and high system availability.
Integrated diagnostic routines for real-time monitoring of memory, processor health, and communication ports.
High-speed connectivity options, including Ethernet and fiber optic interfaces for Mesh network integration.
Optimized for continuous operation in harsh industrial conditions.
ApplicationsThe CP60 is designed for large-scale industrial automation tasks where reliability and real-time responsiveness are paramount. It is commonly deployed in distributed control architectures to manage high-speed communication loops, large database operations, and critical safety-related control sequences.Technical Specifications
Model
CP60 (P0961FR)
Brand
Foxboro (Schneider Electric)
Module Type
Control Processor
Processor Frequency
200 MHz
Memory
128 MB SDRAM / 32 MB Flash
Communication
100 Mbps Ethernet / Fiber Optic Mesh
Power Consumption
15 W (typical)
Operating Temperature
0 to 60 deg C
Operating Humidity
5 to 95 percent RH (non-condensing)
Installation Guidelines
Ensure the control system is powered down before installing or removing the CP60 module from the rack.
Handle the module using proper ESD (Electrostatic Discharge) mitigation practices to prevent internal component damage.
Verify that the module is fully seated in the backplane to ensure reliable communication with the I/O bus.
Maintain adequate airflow within the cabinet to ensure the unit remains within the specified 0 to 60 deg C operating range.
Use shielded cabling for all network interfaces to minimize electromagnetic interference (EMI) in high-noise environments.
FAQDoes the CP60 support redundancy?Yes, the CP60 is designed to support dual-redundant configurations, allowing for a secondary unit to take over control automatically if a fault occurs in the primary processor.What is the primary communication interface for this module?The CP60 utilizes a 100 Mbps Ethernet connection and supports fiber optic interfaces for integration into the Foxboro Mesh network.
The Allen-Bradley 1746-FIO4V is a high-performance Fast Analog I/O module designed for the SLC 500 control platform. This module provides specialized signal processing capabilities, featuring two high-speed analog input channels and two analog voltage output channels, suitable for applications requiring rapid response times and precise signal conversion.Features
Integrated I/O configuration with 2 fast analog inputs and 2 analog voltage outputs.
Supports versatile input/output ranges including +/-10V DC, 0-10V DC, 0-20mA, and 4-20mA.
High-speed processing capability with a slew rate of 2V/ms.
Accuracy rated at +/-0.2% of full scale for reliable process control.
Designed for seamless integration into the SLC 500 backplane.
Technical Specifications
Product Model
1746-FIO4V
Manufacturer
Allen-Bradley
Input Channels
2
Output Channels
2
Voltage Ranges
+/-10V DC, 0-10V DC
Current Ranges
0-20mA, 4-20mA
Accuracy
+/-0.2% of full scale
Slew Rate
2V/ms
Backplane Power
5V DC
Isolation Voltage
500V AC (continuous)
Operating Temperature
0 degC to 60 degC
Storage Temperature
-40 degC to 85 degC
Humidity
5% to 95% (non-condensing)
Installation Guidelines
Ensure the SLC 500 chassis power is disconnected before installing or removing the module to prevent electrical damage.
Verify that the module is fully seated in the chassis slot and secured with the retaining screws.
Use shielded twisted-pair cabling for analog signals to minimize electromagnetic interference (EMI).
Maintain proper grounding practices for the chassis and signal shields to ensure operational stability.
Keep the module away from high-voltage wiring and heat-generating equipment to maintain specified operating temperatures.
FAQWhat is the primary function of the 1746-FIO4V?This module is designed for fast analog data acquisition and control, offering a 2V/ms slew rate for applications where standard analog modules may be too slow.Does this module support current outputs?The 1746-FIO4V is primarily configured for voltage outputs; please refer to the technical specifications for supported input current ranges.
6 in stock
Delivery within 48 hours, pay afterwards
Mid weeks Monday to friday we offer next day delivery if the product is on stock and exceptions on holidays.
Weekends We offer no deliveries in the weekends.
International Depending on where you’re located, we offer next day delivery. Check your status on this link
DescriptionThe DS200PTBAG1A is a specialized Protection Termination Module designed for integration within the General Electric Mark V Speedtronic turbine control architecture. This hardware serves as a critical interface layer between field instrumentation and the primary turbine control system, ensuring the accurate monitoring and protection of steam and gas turbine assets. By facilitating reliable signal routing, the module supports the deterministic performance required for emergency shutdown and operational safety sequences in heavy-duty power generation environments.Features
System Compatibility: Engineered specifically for the Mark V Speedtronic platform, ensuring seamless integration with existing turbine control cabinets.
Signal Termination: Provides a structured interface for field-side wiring, simplifying maintenance and diagnostic procedures.
Group 1 Classification: Designed as a Group 1 component, adhering to established hardware routing and logic standards for the Mark V series.
Integrated Connectivity: Features a dedicated JJS/T connector port to maintain hardware-level compatibility with standard Mark V control configurations.
Robust Construction: Built to operate reliably in demanding industrial conditions, supporting consistent performance for legacy system maintenance.
Installation Guidelines
Handling: This module contains sensitive electronic components. Always use proper ESD (electrostatic discharge) protection during handling and installation.
Power Status: Ensure all power to the Mark V control rack is disconnected before inserting or removing the module to prevent electrical damage.
Mounting: The module is designed for standard mounting within the control cabinet, typically utilizing DIN-rail or panel stand-offs. Ensure all mounting hardware is securely fastened to prevent vibration-induced loosening.
Wiring: Verify that all field connections are correctly terminated according to the specific turbine control loop diagrams. Ensure cables are properly routed and shielded to minimize EMI interference.
Environment: Maintain the cabinet environment within the specified operating temperature range (0 to 60 deg C) to ensure component longevity.
Technical Specifications
Model
DS200PTBAG1A
Brand
GE Fanuc
Series
Mark V Speedtronic
Product Type
Protection Termination Module
Operating Temperature
0 to 60 deg C
Storage Temperature
-40 to 85 deg C
Series Group
Group 1
Connector Type
JJS/T
Mounting
DIN Rail / Panel Mount
FAQIs the DS200PTBAG1A compatible with non-Mark V systems?No, this module is specifically engineered for the GE Mark V Speedtronic turbine control system and is not intended for use in other control platforms.Does the JJS/T connector require external wiring?In standard Group 1 applications, the JJS/T connector is often designated as unused; however, it remains on the board for factory-standard hardware compatibility. Please consult your specific turbine wiring schematic to determine if your application requires utilization of this port.What is the recommended storage environment for this module?To ensure the integrity of the PCB, store the module in a dry, climate-controlled area within the temperature range of -40 to 85 deg C, preferably in its original anti-static packaging.
6 in stock
Delivery within 48 hours, pay afterwards
Mid weeks Monday to friday we offer next day delivery if the product is on stock and exceptions on holidays.
Weekends We offer no deliveries in the weekends.
International Depending on where you’re located, we offer next day delivery. Check your status on this link
DescriptionThe Woodward SST-PB3-PCU is a robust communication interface card engineered for PCI bus-based industrial computing systems. This module serves as a bridge for high-speed data exchange, allowing industrial PCs to participate in PROFIBUS DP and MPI networks. By offloading protocol management to an internal processor, the card maintains deterministic communication performance, making it a reliable component for demanding control applications in sectors such as energy production, petrochemical processing, and automated manufacturing.Features
Integrated on-board processor for dedicated PROFIBUS protocol stack handling, reducing host CPU utilization.
Supports DP-V0, DP-V1, and MPI communication standards for versatile network integration.
Galvanic isolation provided to mitigate the impact of electrical interference and transient voltages.
Universal PCI interface design compatible with both 3.3 V and 5 V bus architectures.
Optimized for low-latency data throughput in critical industrial automation environments.
ApplicationsThis interface card is typically deployed in industrial control systems requiring reliable connectivity between supervisory PCs and PROFIBUS-enabled field devices. Its primary use cases include data acquisition, supervisory control, and synchronization of distributed I/O across large-scale plant networks.Technical Specifications
Model
SST-PB3-PCU
Brand
Woodward (Molex)
Bus Type
PCI 32-bit (Universal 3.3 V / 5 V)
Protocols
PROFIBUS DP-V0, DP-V1, MPI
Operating Temperature
0 to 60 deg C
Weight
0.12 kg
Installation Guidelines
Ensure the host system is powered down and disconnected from the main power source before inserting or removing the card.
Handle the card by its edges and utilize proper ESD (Electrostatic Discharge) precautions to prevent damage to internal components.
Verify that the PCI slot is free of debris and properly aligned before seating the card.
Ensure that the PROFIBUS cabling is correctly shielded and routed away from high-voltage power lines to minimize EMI.
Secure the mounting bracket to the chassis to provide adequate mechanical support and proper grounding.
FAQWhat protocols does the SST-PB3-PCU support?The card supports PROFIBUS DP-V0, DP-V1, and MPI communication protocols.Is this card compatible with older industrial PCs?Yes, the card features a universal PCI interface that supports both 3.3 V and 5 V signaling, allowing for integration into a wide range of legacy and modern industrial computing hardware.Does this card require specific drivers?Yes, integration typically requires the appropriate Woodward/Molex software stack or drivers installed on the host operating system to manage the PROFIBUS communications.
8 in stock
Delivery within 48 hours, pay afterwards
Mid weeks Monday to friday we offer next day delivery if the product is on stock and exceptions on holidays.
Weekends We offer no deliveries in the weekends.
International Depending on where you’re located, we offer next day delivery. Check your status on this link
The Allen-Bradley 1746-C9 is a specialized 36-inch (0.91-meter) ribbon interconnect cable engineered for the SLC 500 modular control system. This component facilitates reliable communication and power distribution between multiple chassis within an industrial control cabinet, enabling the expansion of I/O capacity across secondary or tertiary rack configurations.Features
System Expansion: Supports the daisy-chaining of SLC 500 modular chassis (1746-A4, A7, A10, A13) to extend system I/O beyond a single rack.
Optimal Length: Provides a 3-foot reach, ideal for cabinets where chassis are mounted in stacked or adjacent configurations.
Compatibility: Fully compatible with SLC 5/01, 5/02, 5/03, 5/04, and 5/05 processor-based systems.
Robust Design: Ribbon-style construction ensures secure signal integrity between backplanes while maintaining flexibility for routing within tight enclosure spaces.
ApplicationsThis cable is intended for use in Allen-Bradley SLC 500 installations requiring multi-chassis expansion. It is commonly deployed in manufacturing environments where I/O requirements necessitate additional rack space beyond the primary processor chassis.Technical Specifications
Brand
Allen-Bradley
Product Line
SLC 500
Cable Type
Chassis Interconnect
Length
0.91 m (36 in)
Max System Expansion
3 chassis total
Bend Radius
101.6 mm (4 in)
Operating Temperature
0 to 60 degC (32 to 140 degF)
Installation Guidelines
Ensure the PLC system power is disconnected before installing or removing the interconnect cable.
Align the ribbon cable connectors carefully with the backplane ports on both chassis to prevent pin damage.
Maintain the minimum bend radius of 101.6 mm to avoid stress on the internal ribbon conductors.
Route the cable away from high-voltage wiring, AC power lines, and sources of significant electromagnetic interference (EMI).
Verify that all chassis are properly grounded to the enclosure backplane to ensure signal stability.
FAQWhat is the maximum distance supported by the 1746-C9?The cable is designed for a maximum reach of 36 inches, allowing for flexible mounting of chassis within an enclosure while maintaining required signal integrity.Can I use this cable with any SLC 500 chassis?Yes, the 1746-C9 is compatible with all modular 1746 chassis, including the 4-slot (A4), 7-slot (A7), 10-slot (A10), and 13-slot (A13) versions.
8 in stock
Delivery within 48 hours, pay afterwards
Mid weeks Monday to friday we offer next day delivery if the product is on stock and exceptions on holidays.
Weekends We offer no deliveries in the weekends.
International Depending on where you’re located, we offer next day delivery. Check your status on this link
10 in stock
Delivery within 48 hours, pay afterwards
Mid weeks Monday to friday we offer next day delivery if the product is on stock and exceptions on holidays.
Weekends We offer no deliveries in the weekends.
International Depending on where you’re located, we offer next day delivery. Check your status on this link
DescriptionThe Foxboro FBMSVH is a robust Control Processor Card engineered for the I/A Series distributed control system (DCS). This module serves as a primary computational engine, managing complex regulatory control loops, sequential logic, and real-time data processing for industrial automation environments. Built for high-availability applications, the FBMSVH is designed to maintain process stability in demanding sectors such as power generation, chemical processing, and large-scale manufacturing, ensuring deterministic execution and system reliability.Features
High-performance RISC-based processor architecture for rapid, low-latency control execution.
Integrated ECC memory to protect against data integrity issues in high-EMI industrial environments.
Support for redundant configurations, enabling bumpless failover between primary and tracker modules.
Continuous onboard diagnostic monitoring for proactive hardware and communication status reporting.
Seamless integration with Foxboro I/A Series control networks and Fieldbus modules.
ApplicationsThe FBMSVH is optimized for mission-critical control tasks where uptime and process precision are paramount. It is widely utilized in continuous process control, batch processing, and safety-related monitoring within distributed control architectures.Technical Specifications
Brand
Foxboro (Invensys / Schneider Electric)
Model
FBMSVH
Series
I/A Series
Processor
High-speed RISC
Power Consumption
12 W (Typical)
Operating Temperature
0 to 60 deg C
Storage Temperature
-40 to 85 deg C
Humidity
5 to 95 percent (Non-condensing)
Weight
0.32 kg
Installation Guidelines
Ensure the control system is powered down before inserting or removing the FBMSVH module from the chassis.
Handle the card using proper ESD (Electrostatic Discharge) mitigation practices to protect sensitive onboard components.
Verify that the module is fully seated in the designated I/A Series rack slot to ensure reliable connection with the backplane.
Maintain adequate ventilation around the chassis to keep the ambient temperature within the specified 0 to 60 deg C operating range.
Route communication cables away from high-voltage power lines to minimize electromagnetic interference.
FAQIs the FBMSVH compatible with redundant configurations?Yes, the FBMSVH supports redundant pairing, allowing a primary and a tracker module to work in tandem for instantaneous, bumpless failover.What type of memory does this processor use?The module utilizes onboard Flash and ECC (Error Correcting Code) RAM to ensure high reliability and data integrity during operation.
10 in stock
Delivery within 48 hours, pay afterwards
Mid weeks Monday to friday we offer next day delivery if the product is on stock and exceptions on holidays.
Weekends We offer no deliveries in the weekends.
International Depending on where you’re located, we offer next day delivery. Check your status on this link
4 in stock
Delivery within 48 hours, pay afterwards
Mid weeks Monday to friday we offer next day delivery if the product is on stock and exceptions on holidays.
Weekends We offer no deliveries in the weekends.
International Depending on where you’re located, we offer next day delivery. Check your status on this link
DescriptionThe Foxboro ZCP270 is a robust, high-performance control processor engineered for the I/A Series Distributed Control System (DCS). This module serves as a critical component in large-scale industrial control environments, including power generation, petrochemical processing, and mining operations. By utilizing dedicated hardware for communication and control, the ZCP270 delivers real-time deterministic performance, enabling it to manage high-density I/O and complex control algorithms while maintaining minimal latency.System Architecture and RedundancyDesigned for mission-critical reliability, the ZCP270 supports both standalone and fully redundant configurations. In redundant setups, the processors function in a primary/tracker arrangement, maintaining continuous database synchronization. This architecture enables seamless, bumpless failover, ensuring that control loops remain active and stable even if a hardware fault occurs. The processor operates without internal fans or moving parts, significantly improving the Mean Time Between Failures (MTBF) and reducing maintenance requirements.Features
High-speed RISC processor for complex control logic execution.
Support for up to 10,000 software blocks (application-dependent).
Integrated 100 Mbps Ethernet-based interface for The Mesh network.
Fanless design for enhanced reliability in industrial environments.
Real-time operating system for deterministic process control.
Supports redundancy for high-availability system architectures.
Technical Specifications
Brand
Foxboro (Invensys / Schneider Electric)
Model
ZCP270
Series
I/A Series
Module Type
Control Processor
Processor Type
High-speed RISC
Memory
128 MB SDRAM, 128 MB Flash
Network Interface
100 Mbps The Mesh (Ethernet)
Input Voltage
24 VDC (Nominal)
Power Consumption
8.5 W
Operating Temperature
0 to 60 deg C
Vibration Resistance
5 to 500 Hz
Installation Guidelines
Ensure the control cabinet is clean and dry; the ZCP270 is designed for standard industrial panel mounting.
Always power down the system before inserting or removing the processor module to prevent electrical damage.
Verify that the 24 VDC power supply is stable and within the specified nominal operating range.
Maintain proper ventilation within the cabinet to stay within the 0 to 60 deg C operating temperature range.
Use shielded cabling for network connections to minimize EMI/RFI interference in high-noise industrial environments.
Follow standard ESD (Electrostatic Discharge) procedures when handling the module to protect sensitive internal components.
FAQIs the ZCP270 compatible with redundant systems? Yes, the ZCP270 is specifically designed to support redundant configurations, allowing for a primary/tracker setup that ensures bumpless failover.What is the primary network interface for this processor? The ZCP270 connects to the Foxboro The Mesh network via a 100 Mbps Ethernet-based interface.Does this module require active cooling? No, the ZCP270 is designed without internal fans or moving parts, relying on passive cooling within the cabinet environment.
4 in stock
Delivery within 48 hours, pay afterwards
Mid weeks Monday to friday we offer next day delivery if the product is on stock and exceptions on holidays.
Weekends We offer no deliveries in the weekends.
International Depending on where you’re located, we offer next day delivery. Check your status on this link
