Explore a full range of industrial automation products from major brands like ABB, Bently, Honeywell, GE, and more. IndustriaX Limited helps manufacturers source rare and hard-to-find components worldwide with fast delivery to minimize downtime.
All Products
-
Yokogawa Yokogawa ATR8S-00 S2 Pressure Clamp Terminal Block
Product Description OverviewThe ATR8S-00 S2 from Yokogawa is a precision-engineered pressure clamp terminal block designed for industrial automation systems. It ensures secure and reliable connections for pressure sensors and transmitters, delivering stable and accurate pressure measurement data. The device is built to integrate seamlessly with systems utilizing HART communication protocol, providing robust performance even in challenging industrial environments. Technical Specifications Model Number: ATR8S-00 S2 Manufacturer: Yokogawa Type: Pressure Clamp Terminal Block Dimensions: 5 cm x 13 cm x 15 cm Weight: 0.6 kg Communication Mode: Serial half-duplex, start-stop synchronization, 8-bit data, odd parity, standard termination protocol Supported Protocol: HART Protocol Revision 5.7 Operating Temperature Range: -20 to 70 degrees Celsius Storage Temperature Range: -25 to 85 degrees Celsius Mounting: DIN rail compatible Material: High-strength insulating polymer with corrosion-resistant terminals Application: Suitable for integration with industrial process control systems requiring high-reliability pressure measurements ApplicationsIdeal for process monitoring in chemical plants, water treatment facilities, and manufacturing systems requiring precision pressure control. Designed to maintain accurate readings in redundant sensor setups. FAQ Q: Can this terminal block work with non-Yokogawa pressure transmitters?A: Yes, as long as the transmitters comply with HART Protocol Revision 5.7 and meet voltage and signal specifications. Q: What kind of communication interface does ATR8S-00 S2 support?A: It supports serial half-duplex communication with start-stop synchronization, 8-bit data length, and odd parity. Q: Is it suitable for harsh environmental conditions?A: Yes, the device operates reliably between -20 and 70 degrees Celsius and can be stored safely between -25 and 85 degrees Celsius. Similar Models Comparison ATR8S-01: Includes integrated surge protection for transient voltage events ATR8S-02: Expanded channel count for high-density sensor networks
$200.00 $100.00
-
Yokogawa ATA4D-00 Dual Pressure Clamp Terminal Block | Yokogawa
Product Description OverviewThe ATA4D-00 is a dual-redundant pressure clamp terminal block engineered by Yokogawa for industrial process control applications. It provides secure and reliable connections for multiple pressure transmitters and measurement devices, ensuring system stability and accurate data transmission. This terminal block is designed for integration with Yokogawa’s CENTUM VP system and supports high-density signal routing. Technical Specifications Type: Dual-Redundant Pressure Clamp Terminal Block Model: ATA4D-00 Channels: 16 independent channels Connection Method: Pressure clamp for reliable electrical contact Surge Absorber: Optional installation for transient protection Compatible Systems: Yokogawa CENTUM VP control systems Weight: Approximately 0.30 kilograms Mounting: DIN rail compatible for industrial panel installation Operating Temperature Range: -20 to 70 degrees Celsius Material: High-durability insulating polymer, corrosion-resistant terminals Electrical Rating: Supports standard industrial signal voltage and current ranges ApplicationsIdeal for process control environments where precise pressure monitoring is critical. Common use cases include chemical plants, power generation facilities, and manufacturing lines requiring dual-redundant pressure inputs. FAQ Q: Can the ATA4D-00 be used with non-Yokogawa transmitters?A: It is optimized for Yokogawa transmitters, but compatible pressure signals from standard industry transmitters can be supported if wiring and signal levels match. Q: How is redundancy achieved?A: The dual-redundant design allows two independent signal paths per channel, improving reliability in critical systems. Q: Is surge protection included?A: Surge absorbers are optional and can be added to each channel depending on field requirements. Similar Models Comparison ATA4D-01: Similar dual pressure block with integrated surge absorbers ATA4D-02: Higher channel count for larger systems
$200.00 $100.00
-
Yokogawa Yokogawa ATK4A-00 KS Cable Interface Adapter 16-Channel
Product Description OverviewThe Yokogawa ATK4A-00 is a 16-channel KS Cable Interface Adapter engineered for seamless connection between field instruments and Yokogawa automation systems. This adapter supports both analog voltage and current signals, delivering precise and stable data transmission. Its robust design and fast response make it ideal for high-performance control environments. Technical Specifications Model Number: ATK4A-00 Product Type: KS Cable Interface Adapter Input Signal: 4 to 20 mA DC or 1 to 5 V DC Allowable Common Mode Voltage: ±1 V or less Maximum Input Current: 27 mA Data Update Period: 10 milliseconds Operating Temperature: -20 to +70 degrees Celsius Dimensions: 5.1 cm x 20.3 cm x 15.2 cm (2.0" x 8.0" x 6.0") Weight: 0.9 kg (1 lbs 16 oz) Key Features Supports both DC current and voltage signals for flexible integration High-speed 10 ms data update period for responsive control Compact and durable design suitable for modular system installation Ensures reliable communication between field devices and Yokogawa controllers Applications Signal interface for CENTUM VP and CS3000 systems Connecting analog field devices in process control environments High-accuracy measurement and monitoring of plant signals Integration into distributed control system networks FAQ Q: What types of signals does this adapter support?A: It supports 4 to 20 mA DC current signals and 1 to 5 V DC voltage signals. Q: Can it operate in high-temperature environments?A: Yes, it is rated to operate reliably between -20 and +70 degrees Celsius. Q: How fast is the data update?A: The module updates data every 10 milliseconds, ensuring rapid signal transmission. Similar Model Comparison ATK4A-01: 8-channel version with similar voltage and current support ATK4A-02: 32-channel high-density interface for larger installations
$200.00 $100.00
-
Yokogawa Yokogawa ATRBS-00S2 Terminal Module CENTUM VP CS3000 Compatible
Product Description OverviewThe Yokogawa ATRBS-00S2 Terminal Module provides secure and reliable connection between field devices and Yokogawa control systems, including CENTUM VP and CENTUM CS3000. Designed for precision signal transmission and system integration, this module ensures stable operation in challenging industrial environments. Technical Specifications Model Number: ATRBS-00S2 Product Type: Terminal Module System Compatibility: CENTUM VP and CENTUM CS3000 Sampling Rate: 1 Hz to 100 kHz Accuracy: ±0.01 percent of full scale Reliability: Mean Time To Failure (MTTF) greater than 100,000 hours Operating Temperature: -40 to +70 degrees Celsius (-40 to +158 degrees Fahrenheit) Dimensions: 12.7 cm x 22.9 cm x 17.8 cm Weight: 0.3 kg Key Features High-precision analog and digital signal handling Wide operating temperature range suitable for harsh conditions Compact design for modular system integration Long service life with exceptional reliability Applications Connecting sensors and field devices to Yokogawa DCS systems Process monitoring and control in chemical, oil, and gas industries Signal acquisition and distribution for automation systems Use in both CENTUM VP and CS3000 environments for flexible deployment FAQ Q: Is this module compatible with all CENTUM CS systems?A: The module is fully compatible with CENTUM VP and CS3000 systems. Other legacy CENTUM versions may require verification. Q: What is the maximum sampling rate?A: The module supports up to 100 kHz sampling rate, suitable for high-speed process monitoring. Q: Can this module operate in extreme environments?A: Yes, it functions reliably from -40 to +70 degrees Celsius. Similar Model Comparison ATRBS-00S1: Similar module with lower sampling rate and reduced operating temperature range ATRBS-01S2: Advanced module with extended channel capacity and higher accuracy
$200.00 $100.00
-
Yokogawa AAI143-H03 Analog Input Module 16-Channel 4-20mA | Yokogawa
Product Description OverviewThe AAI143-H03 (AAI143H03) is a high-performance analog input module designed for industrial control systems. This 16-channel, fully isolated module supports 4 to 20 mA input signals and features HART digital communication for enhanced monitoring and configuration. Built to meet ISA G3 standards, it operates reliably within a wide temperature range, making it ideal for demanding automation environments. Technical Specifications Number of input channels: 16, fully isolated Input signal range: 4 to 20 mA Maximum allowable input current: 24 mA Withstand voltage: Input to system 1500 V AC for 1 minute Input resistance: Power ON: 270 Ohms at 20 mA, 350 Ohms at 4 mA Power OFF: Greater than 500 kOhms Measurement accuracy: ±16 microamps Data update rate: 10 milliseconds Operating temperature: -20 to 70 degrees Celsius Interface: KS Cable Adapter compatible with AEA4D terminal board (Model ATK4A-00) Module weight: 0.3 Kg Key Features HART protocol support for advanced digital communication Full isolation across channels ensures signal integrity Compliance with ISA G3 standards Compact, lightweight design suitable for modular integration Applications Process control monitoring in chemical, oil, and gas industries Temperature and pressure data acquisition Integration with distributed control systems (DCS) HART-enabled device diagnostics and calibration FAQ Q: Can this module handle currents above 20 mA?A: The module supports up to 24 mA for short-term overloads, but normal operation should remain within 4 to 20 mA. Q: What type of terminal board is compatible?A: It is compatible with AEA4D terminal boards via the KS Cable Adapter (ATK4A-00). Q: Is this module suitable for outdoor installation?A: It operates reliably between -20 to 70 degrees Celsius but should be housed in an appropriate enclosure for extreme weather exposure. Similar Models Comparison AAI143-H02: Supports 8 channels, lower accuracy AAI143-H04: Supports 32 channels, extended temperature range
$200.00 $100.00
-
Yokogawa YOKOGAWA AAI543-H00 S1 16-Channel Analog Input Module
Product Description Overview The AAI543-H00 S1 from YOKOGAWA is a high-precision, 16-channel analog input module designed for use with the CENTUM VP distributed control system (DCS). It converts analog signals from field devices into reliable digital signals for real-time process monitoring and control. This module combines fast response, wide input range, and HART communication support, making it ideal for critical process automation applications. Technical Specifications Number of Channels: 16 Input Signal: 4 to 20 mA DC or 1 to 5 V DC Input Voltage Range: -10 to 130 V DC Conversion Accuracy: 0.1 percent of full scale Conversion Time: 2 milliseconds HART Communication: Supported Hot-Swappable: Yes Dimensions (W x H x D): 100 mm x 80 mm x 35 mm Operating Temperature: -10 to 55 degrees Celsius Mounting: DIN rail or panel compatible Key Features High-precision analog signal conversion Rapid update rate for real-time control Wide input voltage range for flexible installation Supports HART communication for device diagnostics Hot-swappable design minimizes downtime Compact form factor for space-constrained installations Applications Monitoring sensors and actuators in process control Integration into distributed control systems (DCS) Real-time measurement and control of valves and actuators High-speed analog data acquisition in industrial plants FAQ Q: Can this module operate while other modules are replaced?A: Yes, it supports hot-swapping, allowing system maintenance without shutting down the DCS. Q: Is HART protocol fully supported?A: Yes, HART communication is integrated for diagnostics and advanced device configuration. Q: What are comparable modules for higher channel counts?A: The AAI544 series offers modules with higher channel capacity and enhanced output features.
$200.00 $100.00
-
Yokogawa YOKOGAWA AAI543-S50 S1 Analog Output Module | High Precision Control
Product Description Overview The AAI543-S50 S1 from YOKOGAWA is a high-performance analog output module designed to convert digital signals into precise analog outputs. Engineered for reliability and speed, this module integrates seamlessly into advanced industrial control and automation systems. Technical Specifications Input Voltage: DC 24V Output Voltage Range: 0 to 10V Output Current Range: 4 to 20mA Resolution: 16-bit Accuracy: ±0.05 percent Update Rate: 10 milliseconds Communication Interface: Standard industrial bus (supports Modbus/Profibus optional) Operating Temperature: -10 to 55 degrees Celsius Mounting: DIN rail compatible Working Principle The AAI543-S50 S1 uses advanced digital signal processing to translate digital inputs into precise analog signals. Data communication with other modules or control systems occurs via bus interfaces, enabling synchronized control and reliable data transmission across industrial networks. Applications Process control in manufacturing plants Motor and actuator control systems Precise instrumentation signal output Integration into distributed control systems (DCS) and SCADA environments FAQ Q: Can this module handle multiple analog channels simultaneously?A: Yes, depending on system configuration, it can manage multiple analog outputs with high precision. Q: Is this module compatible with existing YOKOGAWA DCS systems?A: Yes, it is fully compatible and supports standard industrial communication protocols for integration. Q: What maintenance is required for optimal performance?A: Periodic inspection of electrical connections and environmental conditions ensures sustained accuracy and reliability. Comparable Models AAI543-S03: Similar function but with slightly lower resolution and slower update rate. AAI544 Series: Offers higher output current capability for heavy-duty applications.
$200.00 $100.00
-
Yokogawa AAI141-S50 Analog Input Module 16-Channel Non-Isolated | Yokogawa
Product Description Overview The Yokogawa AAI141-S50 is a high-precision analog input module designed for process control systems. This module supports 16 non-isolated input channels, each capable of receiving standard 4 to 20 mA DC signals. Engineered for reliable performance in standard industrial environments, it ensures accurate data acquisition for various control and monitoring applications. Technical Specifications Model: AAI141-S50 Manufacturer: Yokogawa Module Type: Analog Input Number of Input Channels: 16, non-isolated Input Signal Range: 4 to 20 mA DC Maximum Allowable Input Current: 27 mA Isolation: Non-Isolated Mounting: DIN rail compatible Weight: 0.2 kg Protection: Standard type, no explosion-proof features Operating Temperature: -10 to 55 Celsius (recommended industrial range) Accuracy: Typically ±0.1% of full scale Response Time: < 100 ms Applications Ideal for process monitoring, industrial automation control, and signal acquisition systems. Suitable for integrating multiple analog field devices such as transmitters, sensors, and transducers into distributed control systems. FAQ Q: Can this module be used in hazardous environments?A: No, the AAI141-S50 is standard type without explosion protection. Q: What signal types are supported?A: It only supports 4 to 20 mA DC current input signals. Q: How does this model differ from AAI141-S51?A: The S51 variant may include isolation or explosion-proof options; the S50 is the basic standard non-isolated type.
$200.00 $100.00
-
Yokogawa Yokogawa AAI143-S03 16-Channel Analog Input Module HART
Product Description OverviewThe AAI143-S03 from Yokogawa is a precision 16-channel analog input module engineered for reliable signal acquisition in industrial environments. Each channel is fully isolated to prevent electrical interference, providing consistent accuracy for process control applications. The module includes HART digital communication for remote configuration and device diagnostics. Optional connectivity accessories enhance integration with terminal boards and field devices. Key Features Model: AAI143-S03 16 isolated analog input channels Standard 4-20 mA input signal HART protocol support for advanced communication Operates reliably in -20 to 70 Celsius temperature range KS Cable Interface Adapter optional for AEA4D terminal board Compatible with pressure clamp terminals and MIL connector covers Technical Specifications Parameter Specification Input Type Analog, 4-20 mA standard Channels 16, fully isolated Communication HART protocol Temperature Range -20 to 70 Celsius (ISA Standard G3 certified) Interface Adapter Optional KS Cable Interface for AEA4D terminal board Mounting DIN rail compatible External Terminals Pressure clamp, MIL connector, connector cover available Weight Approx. 0.4 kg Power Supply 24 V DC nominal Isolation Voltage 1500 V AC channel-to-channel typical ApplicationsThis module is ideal for process automation, distributed control systems, and integration with SCADA platforms. It is commonly used in chemical, water treatment, power generation, and oil and gas industries. The HART capability allows continuous monitoring and remote configuration in large industrial networks. FAQ Q: Can this module operate in extreme temperatures?A: Yes, the AAI143-S03 supports operation from -20 to 70 Celsius with ISA Standard G3 certification. Q: Is HART communication available on all channels?A: Yes, all 16 channels support HART communication for device diagnostics and parameter setup. Q: What accessories are available for integration?A: KS Cable Interface Adapter for AEA4D terminal board, pressure clamp terminals, and MIL connector covers can be used for installation flexibility. Similar Models Comparison AAI143-S01: 16-channel module without HART AAI143-S05: HART module with enhanced temperature tolerance and additional redundancy features
$200.00 $100.00
-
Yokogawa Yokogawa AAI543-H50/K4A00 Analog Output Module 16-Channel HART
Product Description OverviewThe AAI543-H50/K4A00 is a high-precision analog output module from Yokogawa, designed for process control systems requiring accurate 4-20 mA output signals. With 16 isolated output channels, the module ensures reliable signal transmission and supports standard switch-over response in redundant configurations. The integrated HART digital communication provides remote configuration, diagnostics, and monitoring capabilities. Key Features Model: AAI543-H50/K4A00 16 isolated output channels Output signal range: 4-20 mA Standard switch-over response for redundant operation HART protocol digital communication Compatible with KS Cable Interface Adapter (for AEA4D terminal board, Model ATK4A-00) Basic type, no explosion protection Technical Specifications Parameter Specification Output Channels 16, isolated Output Signal 4-20 mA Withstanding Voltage 1500 V AC between output and system for 1 minute Allowable Load Resistance 0 to 750 Ohm Circuit-Open Detection Less than 0.65 mA Accuracy ±48 uA Data Update Period 10 ms Temperature Drift ±16 uA per 10 Celsius Maximum Current Consumption 230 mA at 5 V DC, 540 mA at 24 V DC External Communication Pressure clamp terminal, MIL connector, dedicated KS1 cable Operating Temperature Range -20 to 60 Celsius Weight 0.4 kg Mounting KS Cable Interface Adapter compatible ApplicationsIdeal for distributed control systems, process automation, and SCADA integration. Common industries include chemical, oil and gas, water treatment, and power plants. The module is particularly suited for redundant configurations where high reliability is required. FAQ Q: Is this module suitable for explosive environments?A: The AAI543-H50/K4A00 is not rated for explosion protection; select a certified model if necessary. Q: Can all channels communicate using HART?A: Yes, all 16 channels support HART for remote configuration and diagnostics. Q: What interface is required to connect the terminal board?A: The module uses a KS Cable Interface Adapter compatible with the AEA4D terminal board (Model ATK4A-00). Similar Models Comparison AAI543-H30: Non-HART version, same channel count and output range. AAI543-H60: HART version with enhanced redundancy and optional explosion protection.
$200.00 $100.00
-
Yokogawa AAI143-H50/K4A00 Analog Input Module 16-Channel HART | Yokogawa
Product Description OverviewThe AAI143-H50/K4A00 from Yokogawa is a high-performance analog input module designed for precise process measurement and control. This module supports 16 channels of 4-20 mA signals with full isolation between channels, ensuring reliable data acquisition and minimizing cross-channel interference. The integrated HART digital communication interface enables seamless diagnostics and parameter configuration over existing wiring. Key Features Model: AAI143-H50/K4A00 Analog input range: 4-20 mA Number of channels: 16 Input isolation: Channel-to-channel isolated Communication: HART protocol support Explosion protection: Not included Mounting: Supports KS Cable Interface Adapter (for AEA4D terminal board, Model ATK4A-00) Type: Basic version with digital communication Technical Specifications Parameter Specification Signal Type 4-20 mA analog input Channels 16 Input Impedance 250 Ohm typical Isolation Voltage 1500 V AC channel-to-channel Accuracy 0.1% of span typical Response Time 100 ms typical Communication HART Protocol Power Supply 24 V DC nominal Mounting KS Cable Interface Adapter compatible Temperature Range -20 to 60 Celsius operating Housing DIN rail mount, industrial grade ApplicationsThis module is suitable for distributed control systems, process monitoring, and integration with advanced SCADA systems. Typical industries include chemical, oil and gas, water treatment, and power generation. FAQ Q: Can this module be used in explosive environments?A: The AAI143-H50/K4A00 is not rated for explosion protection; select a certified model if required. Q: Is the HART communication supported on all channels?A: Yes, all 16 channels can communicate digitally via HART for configuration and diagnostics. Q: What terminal board is compatible with this module?A: The module connects through a KS Cable Interface Adapter to the AEA4D terminal board, Model ATK4A-00. Similar Models Comparison AAI143-H30: Non-HART version, same channel count. AAI143-H60: HART version with explosion protection.
$200.00 $100.00
-
Yokogawa Yokogawa AAI543-H50/A4S00 Analog Output Module 16-Channel HART
Product Description OverviewThe AAI543-H50/A4S00 from Yokogawa is a high-performance analog output module designed for industrial process control applications. This 16-channel module provides isolated 4 to 20 mA output signals and supports HART digital communication, offering reliable operation in complex automation systems. The unit is optimized for standard switch-over response in redundant configurations and comes with a pressure clamp terminal block for secure wiring connections. Key Features 16-channel isolated analog output 4 to 20 mA current output Supports HART protocol for digital communication Redundant system compatibility with standard switch-over response Basic type configuration for standard applications Includes ATA4S-00 pressure clamp terminal block for secure wiring Technical Specifications Parameter Specification Model AAI543-H50/A4S00 Channels 16 isolated analog outputs Output Signal 4 to 20 mA Communication Protocol HART Redundancy Capability Standard switch-over response Explosion Protection Not provided Mounting Type Rack-mounted Terminal Block ATA4S-00 Pressure Clamp Operating Temperature -10 to 55 Celsius Storage Temperature -20 to 70 Celsius Power Supply 24 VDC Response Time Typical 200 ms Accuracy 0.1 percent of full scale ApplicationsIdeal for controlling industrial process instruments, the module is widely used in chemical plants, oil and gas facilities, water treatment systems, and manufacturing automation. It ensures precise analog output control while maintaining communication with digital HART-enabled devices. FAQ Q: Can this module be used in hazardous areas?A: No, the AAI543-H50/A4S00 is not rated for explosion-proof environments. Q: Is it compatible with redundant systems?A: Yes, it supports standard switch-over response in redundant configurations. Q: What is the benefit of the ATA4S-00 terminal block?A: The pressure clamp terminal ensures secure and vibration-resistant wiring, reducing maintenance requirements. Related Models AAI543-H51 – High-speed response variant AAI543-H52 – Extended temperature range model
$200.00 $100.00
-
Yokogawa AAI143-H00/A4S00 | Yokogawa | 16-Channel Analog Input Module
Product Description OverviewThe Yokogawa AAI143-H00/A4S00 is a high-precision analog input module offering 16 isolated channels for 4-20 mA current signals. Designed for industrial control systems, it supports both basic and HART-enabled configurations, providing reliable data acquisition with minimal temperature drift. The module can accommodate dual-wire and four-wire transmitters and features flexible external communication options, including pressure clamp terminals and MIL connector cables. Key Features 16 fully isolated input channels Input current range: 4 to 20 mA High voltage isolation of 1500 V AC for 1 minute Configurable for 2-wire or 4-wire transmitters per channel Supports HART communication protocol (H type) Compatible with dedicated KS1 cables and pressure clamp terminals Low drift due to ambient temperature changes: ±16 µA/10°C Compact and lightweight: 0.3 kg Technical Specifications Specification Details Model AAI143-H00/A4S00 Input Channels 16 isolated channels Input Signal 4 to 20 mA Maximum Input Current 24 mA Isolation Voltage 1500 V AC between input and system for 1 minute Input Resistance Power ON: 270 Ohm (20 mA) to 350 Ohm (4 mA); Power OFF: 500 kOhm minimum Accuracy ±16 µA Data Update Rate 10 ms Transmitter Supply Voltage 19.0 V minimum at 20 mA, 25.5 V maximum at 0 mA (current limit 25 mA) Transmitter Configuration 2-wire or 4-wire selectable per channel Temperature Drift ±16 µA per 10 °C Maximum Current Consumption 230 mA (5 V DC), 540 mA (24 V DC) External Communication Pressure clamp terminal, MIL connector cable, dedicated KS1 cable HART Support Yes (H type) Weight 0.3 kg ApplicationsIdeal for process control, industrial monitoring, and automation systems, the AAI143-H00/A4S00 ensures accurate current measurement in both standard and HART-enabled configurations. Its isolation and redundancy compatibility make it suitable for critical applications where signal integrity is essential. FAQ Q: Can this module support HART-enabled devices?A: Yes, the H variant provides full HART protocol compatibility. Q: What type of transmitters can it work with?A: The module supports both 2-wire and 4-wire transmitters per channel. Q: How is external communication handled?A: Communication is possible through pressure clamp terminals, MIL connector cables, or dedicated KS1 cables. Comparison with Similar ModelsCompared to the AAI143-H00 basic type, the AAI143-H00/A4S00 adds pressure clamp terminal support and enhanced connectivity options, making it more versatile for industrial setups.
$200.00 $100.00
-
Yokogawa Yokogawa AAl543-S03 16-Channel Analog Output Module IP67
Product Description OverviewThe Yokogawa AAl543-S03 is a precision analog output module designed to deliver reliable 4-20 mA signals across 16 isolated channels. It supports standard switch-over response in redundant system configurations and provides robust electrical isolation for enhanced system safety. The module is protected by an IP67-rated enclosure and is compatible with DIN rail mounting, making it suitable for demanding industrial environments. Key Features 16 fully isolated analog output channels Current output range: 4 to 20 mA High-voltage isolation of 1500 VAC for one minute Standard switch-over response in redundant configurations IP67-rated enclosure for dust and water protection DIN rail mountable for flexible installation Technical Specifications Specification Details Model AAl543-S03 Output Channels 16 isolated channels Output Signal 4 to 20 mA Withstanding Voltage 1500 VAC between output and system for 1 minute Isolation 1500 VAC Ambient Temperature -10 to +55 degrees Celsius Relative Humidity 0 to 95% non-condensing Enclosure Rating IP67 Mounting DIN rail Redundant Configuration Supported with standard switch-over response ApplicationsThe AAl543-S03 is ideal for industrial control systems requiring reliable analog signal output, redundancy support, and environmental protection. It is well-suited for process control, factory automation, and outdoor installations where robust performance and durability are essential. FAQ Q: Can this module operate in high-humidity environments?A: Yes, it supports relative humidity up to 95% non-condensing. Q: Is the module suitable for DIN rail installation?A: Yes, the enclosure is designed for easy DIN rail mounting. Q: How is redundancy handled?A: The module supports standard switch-over response for dual-redundant configurations. Similar Models ComparisonCompared with the AAl543-S02, the AAl543-S03 adds improved IP67 protection and supports wider environmental conditions, making it more suitable for outdoor or harsh industrial environments.
$200.00 $100.00
-
Yokogawa Yokogawa AA1143-H53 16-Channel Analog Input Module
Product Description OverviewThe Yokogawa AA1143-H53 is a high-performance analog input module designed to handle multiple current signals with high accuracy. It supports up to 16 isolated input channels and is compatible with dual-redundant configurations, providing reliable performance for critical industrial monitoring and control systems. Key Features Supports 16 isolated input channels Compatible with 4-20 mA analog signals Dual-redundant configuration possible High accuracy with minimal drift over temperature Technical Specifications Specification Details Model AA1143-H53 Input Channels 16 isolated channels Input Signal Range 4 to 20 mA Maximum Allowable Input 24 mA Isolation (Power On) 1500 VAC between input and system for 1 minute Withstanding Voltage 270 Ohm at 20 mA to 350 Ohm at 4 mA Input Resistance Minimum 500 kOhm Measurement Accuracy ±16 μA Data Update Period 10 ms Transmitter Supply Voltage 19.0 V minimum at 20 mA, 25.5 V maximum at 0 mA (Output current limit 25 mA) Transmitter Configuration Supports both 2-wire and 4-wire setups per channel Temperature Drift ±16 μA per 10°C Maximum Current Consumption 230 mA (5 V DC), 540 mA (24 V DC) Weight 0.3 kg ApplicationsIdeal for industrial process monitoring, automation systems, and scenarios requiring precise current measurement with isolation and redundancy. Suitable for both factory and field deployment. FAQ Q: Can this module be used with 2-wire transmitters?A: Yes, each channel supports configurable 2-wire or 4-wire transmitter setups. Q: Is the module suitable for high-voltage isolation applications?A: Yes, it provides 1500 VAC isolation between input and system, ensuring safety in demanding industrial environments. Q: What is the maximum allowable input current?A: The module can safely handle up to 24 mA per channel. Similar Models ComparisonCompared to the AA1142, the AA1143-H53 offers higher channel count and lower drift specifications, making it suitable for more demanding applications.
$200.00 $100.00
-
Yokogawa Yokogawa AAI143-S00/A4S00 Analog Input Module 16-Channel 4-20 mA
Product Description OverviewThe AAI143-S00/A4S00 from Yokogawa is a high-precision analog input module designed for reliable process monitoring and control. It supports 16 isolated input channels and operates with standard 4-20 mA signals, ensuring compatibility with a wide range of industrial sensors and transducers. This module offers robust isolation between channels and the system, minimizing interference and enhancing measurement accuracy in complex industrial environments. Technical Specifications Parameter Specification Model AAI143-S00/A4S00 Manufacturer Yokogawa Module Type Analog Input Module Input Signal 4-20 mA Current Loop Number of Channels 16 Isolation Channel-to-channel isolation included Terminal Type Pressure Clamp Terminal Block (ATA4S-00) Accuracy Typically 0.1% of full scale Response Time < 100 ms Supply Voltage 24 VDC Power Consumption 3 W (typical) Operating Temperature 0°C to 55°C Storage Temperature -20°C to 70°C Mounting DIN Rail or Panel Mount compatible Suffix / Option Codes -S: Standard, 0: Base Type, /A4S00: Pressure Clamp Terminal Features Supports 16 fully isolated analog input channels Compatible with 4-20 mA sensors High accuracy and low noise design Optional pressure clamp terminal block for secure wiring Compact design for easy integration into control panels ApplicationsThe AAI143-S00/A4S00 is suitable for: Process automation monitoring Data acquisition systems Industrial control systems requiring multiple analog inputs Applications where signal integrity and channel isolation are critical FAQ Q: Can this module support 0-10V inputs?A: No, the AAI143-S00/A4S00 is designed exclusively for 4-20 mA current inputs. Q: Is the module hot-swappable?A: No, it should be powered down before installation or removal to avoid signal disruption. Q: How does it differ from AAI143-L00?A: The L00 variant has a lower channel count and does not include optional pressure clamp terminals.
$200.00 $100.00
-
Yokogawa AAI135-H00 | Yokogawa | Analog Input Module (Current Input)
Product Description OverviewThe AAI135-H00 from Yokogawa is an 8-channel analog input module optimized for precise 4 to 20 mA current measurements. Each channel is fully isolated, supporting stable operation in high-noise industrial environments. This module features HART digital communication capability and a KS Cable Interface Adapter (Model ATK4A-00) for secure connection to AEA4D terminal boards. Its robust design ensures reliable performance under varying operating conditions. Technical Specifications Model: AAI135-H00 Module Type: Analog Input Module (Current Input) Input Channels: 8, fully isolated Input Signal Range: 4 to 20 mA Maximum Input Current: 25 mA Input Resistance: Power ON: 290 ohms at 20 mA, 450 ohms at 4 mA Power OFF: 500 k ohms minimum Withstanding Voltage: Between input and system: 500 V AC, 1 minute Between input channels: 500 V AC, 1 minute Accuracy: ±16 microamps Communication: HART protocol Terminal Adapter: KS Cable Interface Adapter (Model ATK4A-00) Operating Temperature: -10 to 55 degrees Celsius (typical) Weight: 0.3 kg Applications Multi-channel current signal monitoring Integration with Yokogawa DCS and PLC systems Critical process control requiring channel isolation Data acquisition in high-noise or harsh environments FAQ Q: Can the AAI135-H00 support voltage input signals?A: No, this module is specifically designed for 4 to 20 mA current input signals only. Q: Is the module compatible with other terminal boards?A: Proper operation requires the KS Cable Interface Adapter (Model ATK4A-00) for connection to AEA4D terminal boards. Similar Models Comparison AAI135-H01: 4-channel version of analog input module for smaller systems. AAI143-H00: 16-channel input module offering higher channel density with similar HART support.
$200.00 $100.00
-
Yokogawa Analog Output Module Discontinued | Yokogawa AAI543-H03 K4A00
Product Description OverviewThe AAI543-H03 (K4A00) from Yokogawa is a 16-channel analog output module designed for high-precision signal control in process automation systems. Each channel provides isolated 4 to 20 mA output with standard switch-over response for redundant configurations. This model includes HART communication and temperature rating from -20 to 70 degrees Celsius, ensuring reliable operation in varied industrial environments. Note that this unit has been discontinued and replaced by AAI543-H53 (K4A00) for new installations. Technical Specifications Model: AAI543-H03 Order Number: K4A00 Module Type: Analog Output Module Output Channels: 16, fully isolated Output Signal Range: 4 to 20 mA Redundancy: Standard switch-over response Withstanding Voltage: 1500 V AC between output and system for 1 minute Allowable Load Resistance: 0 to 750 Ohms Circuit-Open Detection: Less than 0.65 mA Accuracy: ±48 microamps Data Update Period: 10 milliseconds Temperature Drift: ±16 microamps per 10 degrees Celsius Maximum Current Consumption: 230 mA at 5 V DC, 540 mA at 24 V DC Communication: HART protocol, supports pressure clamp terminal, MIL connector cable, and dedicated KS1 cable Terminal Adapter: KS Cable Interface Adapter for AEA4D terminal board (Model ATK4A-00) Operating Temperature: -20 to 70 degrees Celsius Weight: 0.4 Kg Applications High-precision analog signal output for distributed control systems Integration with Yokogawa DCS and PLC platforms Redundant system configurations for critical process control Industrial environments requiring HART communication support FAQ Q: Is the AAI543-H03 compatible with existing AEA4D terminal boards?A: Yes, it requires the KS Cable Interface Adapter (Model ATK4A-00) for proper connection. Q: What is the replacement for this discontinued model?A: The AAI543-H53 (K4A00) is the recommended replacement with enhanced reliability and updated specifications. Similar Models Comparison AAI543-H53: Replacement model with similar 16-channel analog output, enhanced temperature tolerance, and updated communication options. AAI543-H01: 8-channel version with reduced output capacity and lower channel redundancy features.
$200.00 $100.00
-
Yokogawa Yokogawa AAI143 A4S00 16-Channel Analog Input Module
Product Description OverviewThe AAI143 (A4S00) from Yokogawa is a high-performance analog input module designed for precise 4 to 20 mA signal acquisition. This 16-channel module provides fully isolated input channels, ensuring accurate measurement in complex industrial environments. Ideal for process control systems and data acquisition applications, it supports reliable integration with Yokogawa DCS and PLC platforms. Technical Specifications Model: AAI143 Order Number: A4S00 Module Type: Analog Input Module Input Channels: 16 Input Signal Range: 4 to 20 mA Isolation: Fully isolated input channels to prevent ground loops Input Impedance: 250 Ohms nominal Terminal Type: Pressure Clamp Terminal Block (Model ATA4S-00) Accuracy: ±0.1% of full scale typical Response Time: 100 ms typical per channel Power Supply: 24 VDC, typical consumption 2.5 W Operating Temperature: -10 to 55 degrees Celsius Storage Temperature: -20 to 70 degrees Celsius Mounting: DIN rail compatible Communication Interface: Compatible with Yokogawa DCS analog input slots Applications Process measurement and control systems Data acquisition in industrial automation Multi-channel sensor signal monitoring Integration with Yokogawa Centum VP and other DCS platforms FAQ Q: Can this module handle signals outside the 4-20 mA range?A: No, the AAI143 (A4S00) is specifically designed for standard 4-20 mA signals. For other ranges, a signal converter is recommended. Q: Is this module compatible with other brands of PLCs?A: While primarily designed for Yokogawa systems, isolated analog input allows interfacing with other PLCs if signal conditioning and terminal compatibility are ensured. Similar Models Comparison AAI142: 8-channel version of the analog input module with similar specifications. AAI144: 16-channel module supporting voltage inputs in addition to 4-20 mA.
$200.00 $100.00
-
Yokogawa AAI141-S00/K4A00 | Yokogawa | Analog Input Module 16-Channel
Product Description Overview The AAI141-S00/K4A00 from Yokogawa is a high-performance analog input module designed for industrial control systems. It supports 16 channels with 4-20 mA DC input signals and features a non-isolated architecture suitable for compact and cost-effective installations. This model includes the KS Cable Interface Adapter (ATK4A-00) for seamless connectivity. Technical Specifications Model: AAI141-S00/K4A00 Manufacturer: Yokogawa Product Type: Analog Input Module Input Channels: 16, non-isolated Input Signal: 4 to 20 mA DC Maximum Allowable Input Current: 27 mA Interface Adapter: KS Cable Adapter (Model ATK4A-00) Response Time: Typically < 100 ms per channel Accuracy: ±0.1% of full scale Operating Temperature: 0 to 55 degrees Celsius Storage Temperature: -20 to 70 degrees Celsius Dimensions: Standard module size (approx. 100 x 50 x 25 mm) Weight: 0.2 kg Applications The AAI141-S00/K4A00 is ideal for process monitoring, data acquisition, and industrial automation systems requiring reliable 4-20 mA signal inputs. Common applications include chemical plants, water treatment facilities, and manufacturing process control systems. Similar Models Comparison AAI141-S00/K3A00: Standard analog input module without KS cable adapter AAI142-S00/K4A00: Isolated version for higher noise immunity and signal protection FAQ Q: Can this module handle voltage inputs?A: No, this model is designed specifically for 4-20 mA current inputs only. Q: Is the module hot-swappable?A: No, the module requires power-down for safe installation or removal. Q: Can multiple modules be connected together?A: Yes, multiple AAI141-S00/K4A00 modules can be used in a system, but they share a common ground due to non-isolated design.
$200.00 $100.00
-
Yokogawa Yokogawa AAI841-H00/CCC01 Analog I/O Module Current I/O
Product Description Overview The Yokogawa AAI841-H00/CCC01 is an 8-channel analog input and output module designed for precise current signal acquisition and control in industrial process systems. This module supports 4 to 20 mA signal ranges for both input and output channels and integrates HART communication for advanced digital diagnostics and configuration. The module is non-isolated and designed for reliable, space-efficient installation. Key Features Supports 8 analog input channels and 8 analog output channels Input and output signal range: 4 to 20 mA HART-enabled for digital communication and configuration Non-isolated channel design suitable for compact systems Connector cover included for MIL standard cabling (ACCC01) Compact and lightweight design (approximately 0.3 kg) Technical Specifications Parameter Specification Model AAI841-H00/CCC01 Manufacturer Yokogawa Module Type Analog Input/Output (Current I/O) Channels 8 Input / 8 Output Input Signal 4 to 20 mA Output Signal 4 to 20 mA Maximum Input Current 25 mA Input Accuracy ±16 microamperes Isolation Non-isolated Communication HART protocol Connector ACCC01 Connector Cover for MIL cable Weight 0.3 kg Applications Ideal for process control systems requiring reliable analog signal monitoring and control. Typical applications include chemical, petrochemical, and power generation industries where accurate current-based data acquisition is critical. FAQ Q: Can this module operate with voltage signals?A: No, the AAI841-H00/CCC01 is designed exclusively for 4 to 20 mA current signals. Q: Is the module isolated?A: No, it is a non-isolated module suitable for installations where channel isolation is not required. Q: Can it be configured via digital protocols?A: Yes, HART protocol support allows digital configuration and diagnostics. Q: Are there similar models for comparison?A: The AAI841 series includes other variants such as isolated modules or models without HART communication, depending on system requirements.
$200.00 $100.00
-
Yokogawa AAI141-H00/K4A00 | Yokogawa | AAI141 Analog Input Module
Product Description OverviewThe AAI141-H00/K4A00 is a 16-channel non-isolated analog input module from Yokogawa, designed for distributed control systems (DCS). It supports 4-20 mA current inputs and includes HART communication capability, enabling digital interaction with smart field devices. The module features the ATK4A-00 KS Cable Interface Adapter for flexible connection to AEA4D terminal boards, improving integration in industrial automation systems. Technical Specifications Parameter Description Model Number AAI141-H00/K4A00 Manufacturer Yokogawa Product Type Analog Input Module Number of Channels 16 non-isolated channels Input Signal Range 4-20 mA (0-25 mA permissible) Input Impedance (Power ON) 250 ohms Input Impedance (Power OFF) ≥500 k ohms Rated Accuracy ±16 μA (for 1 to 23 mA input range) Data Update Frequency 40 ms Temperature Drift ±16 μA per 10 °C Transmitter Power Supply Minimum 16.15 V at 20 mA, Maximum 26.4 V at 0 mA Output Current Limit 27 mA Maximum Current Consumption 310 mA (5 V system), 450 mA (24 V system) Withstand Voltage 1.5 kVAC for 1 minute Interface Adapter ATK4A-00 KS Cable Interface Adapter (for AEA4D Terminal Board) Applications DCS analog signal monitoring and control Smart transmitter data acquisition using HART communication Multi-channel process signal logging Industrial automation systems integration FAQ Q: Does this module support HART communication?A: Yes, it allows digital communication with smart field devices while reading 4-20 mA analog signals. Q: Are the input channels isolated?A: No, this model is non-isolated. Proper system design should account for potential ground loops. Q: Can this module connect to AEA4D terminal boards?A: Yes, the included ATK4A-00 KS Cable Interface Adapter provides direct connectivity. Function ComparisonCompared to the Yokogawa AAI143 series, the AAI141-H00/K4A00 provides HART communication with non-isolated inputs. It is suitable for applications where isolation is not required but precise 16-channel signal acquisition and smart device interaction are needed.
$200.00 $100.00
-
Yokogawa AAI143-S00/K4A00 | Yokogawa | Analog Input Module
Product Description OverviewThe AAI143-S00/K4A00 from Yokogawa is a high-precision analog input module designed for process control systems. It provides reliable current signal acquisition with fully isolated multi-channel inputs, ensuring measurement accuracy and system safety. Ideal for various industrial monitoring applications. Technical Specifications Parameter Description Model AAI143-S00/K4A00 Manufacturer Yokogawa Product Type Analog Input Module Number of Input Channels 16 isolated channels Input Signal Range 4 to 20 mA Allowable Input Current Maximum 24 mA Isolation Channel-to-channel isolation Interface KS Cable Interface Adapter (for AEA4D Terminal Board, Model ATK4A-00) Module Type Standard type, Basic type Weight 0.3 Kg Mounting DIN rail installation Applications Process control and monitoring systems Industrial equipment analog signal acquisition Multi-channel data logging and analysis System integration and remote monitoring solutions FAQ Q: What signal types does this module support?A: The module supports 4-20 mA current signals, suitable for standard analog sensors. Q: Are the channels isolated?A: Yes, all 16 input channels are fully isolated to ensure safe and reliable signal acquisition. Q: Can it connect directly to the AEA4D terminal board?A: Yes, this model includes a KS Cable Interface Adapter, compatible with the ATK4A-00 terminal board. Function ComparisonCompared to other AAI143 series modules, this module is a basic standard type, providing full isolation and 16-channel input but without advanced filtering or diagnostics, making it suitable for cost-effective industrial applications.
$200.00 $100.00
-
Yokogawa 16-Channel Analog Input Module Industrial Use | Yokogawa AAl141-S00
Product Description OverviewThe Yokogawa AAl141-S00 is a 16-channel analog input module engineered for precise signal acquisition in industrial systems. It supports both current and voltage input types, offering flexible integration into control and monitoring networks. Unlike isolated input modules, this variant features non-isolated channels, providing a cost-effective solution for systems where isolation is not required. Key Features 16-channel analog input Supports 4 to 20 mA or 1 to 5 VDC input signals depending on configuration Non-isolated channel design for simpler installation Sampling rate of 100 samples per second for rapid signal acquisition Operating temperature range from -10 to 55 Celsius (14 to 131 Fahrenheit) Compact and lightweight design for easy integration Technical Specifications Parameter Specification Channels 16 analog inputs Input Type Voltage or Current (4-20 mA, 1-5 VDC) Isolation Non-isolated channels Sampling Rate 100 samples per second Operating Temperature -10 to 55 Celsius Dimensions 40 x 130 x 110 mm Weight 0.3 kg Communication Direct analog input (no digital communication) ApplicationsIdeal for process monitoring, data acquisition, and control applications where high channel density is required. This module is suitable for laboratories, industrial process plants, and any environment needing multiple analog signal inputs without channel isolation. FAQ Q: Can the AAl141-S00 handle both voltage and current inputs?A: Yes, it supports 4-20 mA current and 1-5 VDC voltage input ranges depending on the module configuration. Q: Are the channels electrically isolated?A: No, channels are non-isolated, unlike models such as the AAl143-S00. Q: What environments can it operate in?A: It functions reliably between -10 and 55 Celsius, suitable for standard industrial environments. Similar Models ComparisonThe AAl141-S00 is non-isolated, making it lighter and more compact than the AAl143-S00, which offers full channel isolation for enhanced signal integrity in critical applications.
$200.00 $100.00
You have seen 456 out of 4916 products