تقدم ABB حلول أتمتة صناعية شاملة لمحركات الأقراص وأنظمة التحكم والروبوتات. يضمن مخزوننا العالمي وصولاً سريعاً إلى قطع الغيار النادرة. قلل من وقت التوقف عن العمل وحافظ على استمرارية الإنتاج باستخدام مكونات ABB المعتمدة.
شركة أي بي بي
-
ABB AI820 3BSE008544R1 ABB S800 I/O Analog Input Module
ABB AI820 3BSE008544R1 Analog Input Module The ABB AI820 3BSE008544R1, also cataloged as the AI820 Analog Input Module, operates as a dedicated hardware component for analog signal acquisition within ABB S800 I/O systems. It provides four individually galvanically isolated input channels for current and voltage measurement with 14 bit plus sign resolution. Hardware Specifications Parameter Specification Model AI820 3BSE008544R1 Brand ABB Product Type Analog Input Module Origin Sweden Weight 0.18 kg Dimensions 4.5 x 10.5 x 12 cm Operating Temp Not specified Power Consumption 1.7 W Signal Specification -20 to +20 mA, 0(4) to 20 mA, -10 to +10 V, 0(2) to 10 V Number of Channels 4 channels Channel Isolation Individually galvanic isolated Resolution 14 bit plus sign Input Range Under/Over Range +/- 15% Input Filter Rise Time 40 ms (0 to 90%) Dielectric Test Voltage 500 V AC Current Consumption +5 V ModuleBus 80 mA Current Consumption +24 V External 70 mA Input Impedance 250 ohm for current input Current Input Capability 20 mA Voltage Input Capability 10 VDC ABB Industrial Control and I/O Integration Characteristics The ABB AI820 module interfaces with ABB S800 I/O architectures through ModuleBus communication. It processes bipolar and unipolar analog signals while maintaining galvanic isolation between input channels. Therefore, the module supports separated field signal measurement for industrial control applications requiring isolated analog acquisition. The AI820 follows ABB industrial I/O density scaling principles by providing four configurable analog channels in a compact module format. In addition, its 14 bit plus sign conversion architecture allows the controller system to process positive and negative measurement values for voltage and current inputs. The module supports backplane bus communication velocity within the ABB S800 I/O platform and maintains firmware flash compatibility according to the installed controller and system configuration. Consequently, engineering teams can integrate the module into existing ABB control environments with defined hardware revision management. Frequently Asked Questions Q: What analog signals can the ABB AI820 3BSE008544R1 measure?A: The module accepts current signals of -20 to +20 mA and 0(4) to 20 mA, as well as voltage signals of -10 to +10 V and 0(2) to 10 V. Q: Does the AI820 provide electrical isolation between input channels?A: Yes. The AI820 provides four individually galvanically isolated input channels to separate field signal circuits. Q: What power sources supply the AI820 module?A: The module receives power through the ABB ModuleBus system with +5 V ModuleBus current consumption of 80 mA and requires +24 V external supply current of 70 mA. Field Installation Guidelines Install the AI820 module in an ABB S800 I/O station with correct ModuleBus connection and approved terminal configuration. Verify field wiring polarity before connecting current and voltage input signals. Use shielded signal cables for low-level analog measurement circuits where electromagnetic interference may affect signal accuracy. Connect cable shields according to the plant grounding standard to reduce electrical noise coupling. Separate analog signal wiring from high-current power cables and switching circuits. Confirm the configured input range matches the connected field transmitter or measurement device before commissioning. Check module status indicators after installation to verify correct communication with the controller system.
$199.00 $99.00
-
ABB AI825 3BSE036456R1 ABB S800 I/O Analog Input Module
ABB AI825 3BSE036456R1 Analog Input Module The ABB AI825 3BSE036456R1, also cataloged as the AI825 Analog Input Module, operates as a dedicated hardware component for bipolar current and voltage signal acquisition within ABB S800 I/O systems. The module provides 4 individually galvanic isolated input channels with selectable current or voltage measurement functions. Hardware Specifications Parameter Specification Model AI825 3BSE036456R1 Brand ABB Product Type Analog Input Module Series S800 I/O Origin Sweden Weight 0.22 kg Dimensions 45 mm W x 102 mm D x 119 mm H Operating Temp 0 to +55 deg C Power Consumption Typ. 2.5 W, Max. 3.2 W Article Number 3BSE036456R1 Signal Specification -20 to +20 mA, 0(4) to 20 mA, -10 to +10 V, 0(2) to 10 V Number of Channels 4 HART Support No SOE Support No Redundancy No High Integrity No Intrinsic Safety No Resolution 14 bit plus sign Input Impedance 10 MOhm voltage input, 50 Ohm current input Isolation Individually isolated channel-to-channel and to circuit common Under/Over Range +/- 15% Maximum Error 0.1% Input Filter Rise Time 115 ms voltage input, 130 ms current input Update Cycle Time Less than 10 ms Maximum Field Cable Length 600 m CMRR 120 dB at 50 Hz and 60 Hz NMRR Greater than 40 dB at 50 Hz, greater than 55 dB at 60 Hz Rated Insulation Voltage 250 V Dielectric Test Voltage 1900 VDC channel-to-channel, 3250 VDC channel-to-ground/system ModuleBus Current Consumption +5 V Typ. 70 mA, Max. 100 mA ModuleBus Current Consumption +24 V Typ. 90 mA, Max. 110 mA External +24 V Consumption 0 Compatible MTU TU811, TU813, TU831 Keying Code DA Protection Class IP20 according to IEC 60529 Humidity Range 5 to 95 %, non-condensing Storage Temperature -40 to +70 deg C ABB S800 I/O Backplane and Isolation Characteristics The AI825 uses ABB S800 I/O architecture with ModuleBus power conversion from the 24 V supply. Each input channel maintains individual galvanic isolation, which separates field signals from adjacent channels and the internal circuit common. The module supports direct current measurement inputs with overvoltage protection. The current input circuit uses a PTC resistor for current limitation, while the voltage input stage withstands up to 6.3 V input levels. Therefore, the module can process mixed field signals without external signal conditioning. The S800 platform provides structured I/O density scaling through the ModuleBus interface. The AI825 supports deterministic communication between the I/O module and ABB controller platforms through the S800 I/O communication structure. Frequently Asked Questions Q: Does the AI825 support HART communication for smart field devices?A: No. The AI825 is a standard analog input module and does not provide HART protocol communication capability. Q: Can each AI825 input channel be configured independently?A: Yes. Each of the 4 channels can operate as either a voltage input or a current input with individual galvanic isolation. Q: What MTU units are compatible with the AI825 module?A: The AI825 supports TU811, TU813, and TU831 Module Termination Units with keying code DA. Field Installation Guidelines Install the AI825 module in an ABB S800 I/O station using the specified compatible MTU. Confirm the mechanical keying position before insertion to prevent incorrect module placement. Connect field wiring according to the selected current or voltage input configuration. Keep analog signal cables separated from high voltage and high current conductors to reduce electrical interference. Use proper cable shielding practices for analog signal lines. Connect shields according to the plant grounding standard and avoid creating unwanted ground loops. Verify ModuleBus connections and 24 V power supply quality before system commissioning. Check front LED indicators for Fault, Run, and Warning status after installation.
$199.00 $99.00
-
ABB AI830 3BSE008519R1 RTD Input Module ABB S800 I/O
ABB AI830 3BSE008518R1 RTD Input Module Configured for RTD temperature signal acquisition in ABB System 800xA and S800 I/O networks, the ABB AI830 3BSE008518R1 (AI830 RTD Input Module) provides direct physical measurement of resistive temperature elements through 8 analog input channels. Hardware Specifications Parameter Specification Model AI830 3BSE008518R1 Brand ABB Product Type RTD Input Module Origin Sweden Weight 0.24 kg Dimensions 4.5 x 10.5 x 12 cm Power Consumption 1.6 W Module Type Analog Input Signal Specification 3-wire RTD: Pt100, Cu10, Ni100, Ni120 and resistive potentiometer Number of Channels 8 Update Cycle Time 150 + 9 ms Rated Insulation Voltage 50 V Dielectric Test Voltage 500 V AC CMRR at 50 Hz / 60 Hz >60 dB Current Consumption +5 V Modulebus 70 mA Tariff Code 8537101190 ABB S800 I/O Backplane Integration and I/O Density Scaling The AI830 operates as an ABB S800 I/O analog input component with direct Modulebus communication. It supports configurable channel parameters, allowing each RTD input channel to operate independently according to the connected sensor type. The module performs signal linearization and temperature conversion into Centigrade or Fahrenheit values internally. In addition, the MainsFreq parameter configures the 50 Hz or 60 Hz notch filter cycle to reduce power frequency interference during measurement. The AI830 follows ABB industrial control architecture principles, including I/O density scaling through modular channel allocation and standardized backplane communication interfaces. Frequently Asked Questions Q: Which temperature sensors can the ABB AI830 3BSE008518R1 measure?A: The AI830 supports 3-wire RTD sensors including Pt100, Cu10, Ni100, Ni120, and resistive potentiometers. Q: Does each AI830 input channel have independent configuration capability?A: Yes. Each of the 8 RTD input channels can be configured individually for the connected resistive measurement element. Q: What installation requirement applies to RTD sensor wiring?A: All connected RTD elements must remain isolated from ground to maintain correct measurement performance. Field Installation Guidelines Install the AI830 module in the designated ABB S800 I/O rack position according to system configuration requirements. Connect RTD sensors using 3-wire wiring methods and maintain correct terminal assignments. Keep RTD signal cables separated from high voltage and high current conductors to reduce electrical interference. Ensure all RTD sensors remain isolated from ground unless the system design specifies another grounding method. Verify channel configuration parameters before commissioning temperature measurements. Check Modulebus communication status after installation to confirm correct module recognition.
$199.00 $99.00
-
ABB AI835 3BSE051306R1 ABB S800 I/O Analog Input Module
ABB AI835A Analog Input Module The ABB AI835A, also cataloged as the AI835A Analog Input Module, operates as a dedicated hardware component for thermocouple and millivolt signal measurement within ABB System 800xA S800 I/O platforms. The module provides 8 differential input channels with configurable TC and mV measurement ranges, including cold junction compensation functions. Hardware Specifications Parameter Specification Model AI835A Spare Model 3BSE051306R1 Brand ABB Product Type Analog Input Module Weight 0.25 kg Dimensions 4.1 x 11 x 12 cm (estimated shipping size) Operating Temp Not specified Power Consumption 1.6 W Input Channels 8 differential input channels Input Type Thermocouple and mV measurement mV Measurement Range -30 mV to +75 mV linear Supported Thermocouple Types B, C, D, E, J, K, L, N, R, S, T, U Resolution 15 bits Input Impedance > 1 MOhm Isolation Groupwise isolated from ground Maximum Error 0.1% Temperature Drift Typical 5 ppm/deg C, maximum 7 ppm/deg C Update Cycle Time 280 + 80 x active channels ms at 50 Hz; 250 + 70 x active channels ms at 60 Hz Maximum Field Cable Length 600 m CMRR 120 dB at 50 Hz and 60 Hz NMRR > 60 dB at 50 Hz and 60 Hz Rated Insulation Voltage 50 V Dielectric Test Voltage 500 V AC Current Consumption +5 V Modulebus 75 mA Current Consumption +24 V Modulebus 50 mA Current Consumption +24 V External 0 Backplane Bus Communication and I/O Architecture The AI835A integrates into ABB S800 I/O architecture through the Modulebus interface. The module exchanges measured analog values through the backplane communication path while maintaining channel-level signal conditioning. The module supports I/O density scaling by providing 8 differential measurement channels in a compact I/O configuration. In addition, the firmware flash compatibility within the ABB System 800xA environment allows configuration parameters and measurement functions to be managed through standard engineering tools. The AI835A supports channel-specific configuration for thermocouple and millivolt inputs. Therefore, each input channel can be assigned according to the connected field sensor requirements. Cold Junction Compensation and Signal Processing The AI835A provides cold junction compensation (CJC) capability through Channel 8 configuration. Channel 8 can operate as an ambient temperature measurement channel for Channels 1 to 7. The junction temperature can be measured directly at the MTU screw terminals or through a remote connection unit. Alternatively, the user can configure a fixed junction temperature parameter. For AI835A applications, the fixed value can also be provided from the application software. When CJC measurement is not required, Channel 8 operates as a standard thermocouple or mV input channel. Frequently Asked Questions Q: How many measurement channels does the AI835A provide?A: The AI835A provides 8 differential input channels configured for thermocouple and millivolt signal measurement. Q: Can the AI835A measure different thermocouple types?A: Yes. The module supports thermocouple types B, C, D, E, J, K, L, N, R, S, T, and U, together with a -30 mV to +75 mV linear input range. Q: How does the AI835A perform cold junction compensation?A: Channel 8 can be configured as a cold junction temperature channel. The module can measure junction temperature locally through MTU terminals, remotely through a connection unit, or use a configured fixed temperature value. Field Installation Guidelines Install the AI835A in the designated ABB S800 I/O module position and verify correct Modulebus connection before commissioning. Use shielded field wiring for thermocouple and mV signal connections. Connect cable shields according to the ABB system grounding specification to reduce electromagnetic interference. Keep low-level analog signal cables separated from high-voltage power wiring and switching circuits. Verify terminal assignments before applying field signals. Check sensor polarity, thermocouple type configuration, and cold junction compensation settings during commissioning. Confirm input values through the engineering workstation before placing the measurement loop into operation.
$199.00 $99.00
-
ABB ABB S800 I/O AI845 Analog Input Redundant Module
ABB AI845 Analog Input Redundant Module The ABB AI845 3BSE023675R1, also cataloged as the AI845 Analog Input Redundant Module, operates as a dedicated hardware component for analog current and voltage signal acquisition within ABB System 800xA control platforms. The module processes 8 single-ended channels and supports HART communication for field transmitter data exchange. Hardware Specifications Parameter Specification Model AI845 3BSE023675R1 Brand ABB Module Type Analog Input S/R HART Module System Platform ABB System 800xA / S800 I/O Origin Sweden Weight Approximately 0.23 kg Dimensions 45 x 102 x 119 mm Number of Channels 8 single-ended analog input channels Input Signal Range 0(4)-20 mA, 0(1)-5 V Resolution 12-bit Communication Protocol HART protocol support Transmitter Supply Current-limited transmitter power distribution Diagnostics Integrated module diagnostics Backplane Communication and I/O Configuration The AI845 module operates as an ABB S800 I/O analog input component with integration through the controller backplane communication system. The module supports I/O density scaling through multiple channel configurations while maintaining standardized analog signal processing. Furthermore, the HART communication interface allows digital field device information to transfer together with the analog measurement signal. The module can process transmitter variables and diagnostic data from compatible HART-enabled instruments. The module design supports ABB industrial control architectures using structured I/O configuration, firmware compatibility management, and system-level diagnostic monitoring. Frequently Asked Questions Q: Does the ABB AI845 support HART communication on analog input channels?A: Yes. The AI845 supports HART communication for compatible field transmitters, allowing digital device information to be transferred with the analog input signal. Q: How many analog input channels are available on the AI845 module?A: The AI845 provides 8 single-ended analog input channels for current and voltage measurement applications. Q: What input signals can the AI845 process?A: The module accepts 0(4)-20 mA current signals and 0(1)-5 V voltage signals with 12-bit resolution. Field Installation Guidelines Install the AI845 module according to ABB S800 I/O system installation procedures. Verify that the module is correctly seated in the I/O carrier and that the backplane connection is fully engaged before system startup. Use shielded signal cables for analog transmitter wiring where required by the installation environment. Connect cable shields according to the plant grounding standard to reduce electrical interference. Separate analog signal wiring from high-voltage power cables and switching circuits. Confirm transmitter polarity, loop wiring, and channel configuration before applying field power. Check module diagnostics after installation through the ABB control system engineering tools. Validate input values against the connected field transmitter output before placing the channel into operational service.
$199.00 $99.00
-
ABB ABB S800 I/O 3BSE028600R1 AI880 Analog Input Unit
ABB 3BSE028600R1 AI880 Analog Input Unit Configured for analog signal acquisition in ABB S800 I/O and control system platforms, the ABB 3BSE028600R1 (AI880 Analog Input Unit) provides direct physical/electrical execution for high integrity input measurement and signal processing tasks. Hardware Specifications Parameter Specification Model 3BSE028600R1 Brand ABB Product Type Analog Input Unit ABB Type Designation AI880 Origin Sweden Weight 0.01 kg Configuration High integrity, single or redundant operation Application Interface Analog input signal acquisition Product Category Spare Parts Replacement Product ID 3BSE039293R1 Customs Tariff Number 85389091 ABB S800 I/O Backplane Communication and I/O Density Scaling The AI880 module integrates with ABB S800 I/O architectures through the standard module communication interface. Therefore, it supports structured analog input processing within ABB distributed control configurations. The module design supports high integrity configurations with either single installation or redundant arrangements. Additionally, ABB system engineering can apply redundancy planning to increase availability for critical analog measurement loops. The S800 I/O platform uses standardized backplane communication methods to exchange channel data, diagnostic information, and module status information between field I/O modules and controller systems. Frequently Asked Questions Q: Can the AI880 3BSE028600R1 operate in a redundant configuration?A: Yes. The technical specification identifies the AI880 as supporting single or redundant configurations. The exact redundancy implementation depends on the ABB control system hardware configuration. Q: Is the AI880 3BSE028600R1 a complete controller module?A: No. The AI880 is an Analog Input Unit designed for analog signal acquisition within ABB I/O systems. It does not execute user control logic. Q: Can the module be replaced by another part number?A: The listed replacement product ID is 3BSE039293R1. System compatibility should be verified before replacement installation. Field Installation Guidelines Install the AI880 module only in compatible ABB S800 I/O hardware configurations. Verify the module position, addressing, and controller configuration before energizing the system. Connect analog field wiring according to ABB installation documentation and approved cabinet drawings. Separate analog signal cables from high voltage and high current conductors to reduce electrical interference. Use proper shield grounding practices according to the plant grounding standard. Confirm module diagnostics and communication status after installation through the ABB engineering environment. For redundant configurations, verify the redundancy arrangement and communication status before placing the system into operation.
$199.00 $99.00
-
ABB ABB AI895 3BSC690086R1 Analog Input Module
ABB AI895 3BSC690086R1 Analog Input Module The ABB AI895 3BSC690086R1, also cataloged as the AI895 Analog Input Module, provides 4-20 mA signal acquisition with intrinsic safety interface capability for ABB industrial control system I/O platforms. The module processes eight unipolar analog input channels with HART communication support. Hardware Specifications Parameter Specification Model AI895 3BSC690086R1 Brand ABB Product Type Analog Input Module Origin USA Weight 0.24 kg Dimensions 4.5 x 10.5 x 12 cm Operating Temp 0 deg C to +55 deg C Storage Temp -40 deg C to +70 deg C Power Consumption Not specified Input Signal 4-20 mA Number of Channels 8 Signal Type Unipolar single ended Resolution 12 bit Isolation Groupwise isolated from ground HART Interface Supported Intrinsic Safety Interface Integrated Under Range / Over Range 1.5 mA / 22 mA Accuracy Error Typical 0.05%, Maximum 0.1% Temperature Drift Typical 100 ppm/deg C Input Filter Rise Time 20 ms (0-90%) ABB Industrial I/O Architecture and Signal Processing The AI895 3BSC690086R1 operates as an ABB S800 I/O series analog input component and handles field current signals through eight isolated input channels. Furthermore, the module supports HART-enabled instruments by maintaining analog measurement accuracy while transferring additional device information through the communication layer. The module uses groupwise isolation from ground to reduce interference during field signal measurement. Additionally, the 12 bit conversion resolution enables accurate processing of industrial transmitter signals within the configured input range. ABB control systems apply I/O density scaling methods through modular S800 architecture. Therefore, the AI895 supports structured channel expansion and standardized integration with ABB controller networks using compatible I/O communication interfaces. Frequently Asked Questions Q: Does the AI895 3BSC690086R1 support HART field instruments?A: Yes. The module provides 4-20 mA analog input processing with HART interface support for compatible field devices. Q: How many analog input channels are available on the AI895 module?A: The AI895 provides eight unipolar single ended analog input channels. Q: What isolation method does the AI895 use for input signals?A: The module provides groupwise isolation from ground for the analog input circuits. Field Installation Guidelines Install the AI895 module in the designated ABB S800 I/O rack position according to the system hardware configuration. Verify the backplane connection before powering the I/O station. Use shielded instrumentation cables for 4-20 mA field wiring where required by the installation environment. Connect cable shields according to the plant grounding standard to reduce electromagnetic interference. Separate analog signal wiring from high voltage and high current power cables. Confirm transmitter loop polarity before applying field power. Check HART communication wiring compatibility when connecting smart transmitters. Verify operating temperature conditions before commissioning the module.
$199.00 $99.00
-
ABB AO810V2 3BSE038415R1 | ABB | Analog Output Module
ABB AO810V2 3BSE038415R1 Analog Output Module Configured for analog current signal execution in ABB S800 I/O systems, the ABB AO810V2 3BSE038415R1 (AO810V2 Analog Output Module) provides direct physical output control for 0-20 mA and 4-20 mA field devices within AC 800M and ABB 800xA platforms. Hardware Specifications Parameter Specification Model AO810V2 3BSE038415R1 Brand ABB Product Type Analog Output Module Series ABB S800 I/O Origin Sweden Weight 0.18 kg Dimensions 4.5 x 10.5 x 12 cm Operating Temp Not specified Power Consumption 2.3 W Output Channels 8 analog output channels Signal Specification 0-20 mA, 4-20 mA Resolution 14 bit Isolation Groupwise isolated from ground Under/Over Range - / +15% Rise Time 0.35 ms at PL = 500 ohm Update Cycle Time <= 2 ms Maximum Field Cable Length 600 m Rated Insulation Voltage 50 V Dielectric Test Voltage 500 V AC Current Consumption +5 V Modulebus Maximum 70 mA Current Consumption +24 V External 245 mA ABB Industrial I/O Architecture and Backplane Communication The AO810V2 operates as an S800 I/O analog output device connected through the ABB control system communication structure. The module receives output commands from the controller and converts digital values into continuous current signals through integrated digital-to-analog conversion circuits. Additionally, the module supports diagnostic feedback by reading back serial data from the D/A converters. Therefore, the system can verify output conversion status and identify channel-level faults during operation. The module supports I/O density scaling within ABB S800 configurations. It can be integrated with AC 800M controllers and ABB 800xA automation environments where deterministic module communication and structured I/O management are required. Frequently Asked Questions Q: How many analog output channels does the AO810V2 3BSE038415R1 provide?A: The AO810V2 provides 8 unipolar analog output channels with selectable 0-20 mA and 4-20 mA current signals. Q: Does the AO810V2 support channel diagnostics?A: Yes. The module performs cyclic self-diagnostics and monitors output circuitry, process power supply status, and active channel fault conditions. Q: What type of electrical isolation does the module provide?A: The AO810V2 provides groupwise isolation from ground with a rated insulation voltage of 50 V. Field Installation Guidelines Install the AO810V2 module according to ABB S800 I/O system installation requirements. Verify that the Modulebus connection is correctly seated before powering the system. Use suitable field wiring practices for analog current loops. Keep signal cables separated from high-voltage power conductors to reduce electrical interference. Connect cable shields according to the plant grounding standard. Confirm that field devices match the configured 0-20 mA or 4-20 mA output range before commissioning. Check module diagnostics after installation to verify power supply status, communication operation, and channel output conditions.
$199.00 $99.00
-
ABB AO810V2 3BSE038415R1 ABB S800 I/O Analog Output Module
ABB AO810V2 3BSE038415R1 Analog Output Module Configured for unipolar analog current output in the ABB S800 I/O platform, the ABB AO810V2 3BSE038415R1 (AO810V2 Analog Output Module) provides eight output channels for transmitting 0-20 mA or 4-20 mA control signals. It supports ABB AC 800M controllers and ABB 800xA automation systems while providing cyclic diagnostics for output circuitry and communication with the D/A converters. Hardware Specifications Parameter Specification Model AO810V2 3BSE038415R1 Base Model AO810V2 Spare Model 3BSE038415R1 Brand ABB Product Type Analog Output Module Series S800 I/O Origin Sweden Weight 0.18 kg Dimensions Estimated shipping size: 4.5 x 10.5 x 12 cm Operating Temp Not specified in the supplied data Power Consumption 2.3 W power dissipation Number of Channels 8 Output Type Unipolar analog current output Signal Specification 0-20 mA, 4-20 mA Resolution 14 bit Isolation Groupwise isolated from ground Under/Over Range - / +15% Rise Time 0.35 ms at PL = 500 ohm Update Cycle Time <= 2 ms Maximum Field Cable Length 600 meters Rated Insulation Voltage 50 V Dielectric Test Voltage 500 V AC Modulebus Current Consumption Max 70 mA at +5 V External Current Consumption 245 mA at +24 V Tariff Code 8537101190 Manufacturer ABB S800 I/O Signal Processing and Diagnostics The AO810V2 uses eight analog output channels to generate 0-20 mA or 4-20 mA signals. Each channel provides a unipolar current output for direct connection to compatible field devices. The module reads back serial data from the D/A converters and verifies the returned data. Therefore, communication faults between the module logic and D/A conversion circuitry can be detected during operation. In addition, the module performs cyclic self-diagnostics. It supervises the process power supply and reports insufficient supply voltage to the output circuitry as a channel error. Channel diagnostics also detect output-current faults on active channels. Specifically, the module reports an error when the measured output current falls below the configured output value while that output value exceeds 1 mA. The 14 bit resolution supports discrete analog signal conversion, while the specified update cycle remains at or below 2 ms. Furthermore, the 600 meter maximum field cable length provides the stated installation limit for field signal wiring. Frequently Asked Questions (FAQ) Q: How many analog output channels does the AO810V2 provide?A: The AO810V2 provides 8 unipolar analog output channels. Q: Which output current ranges does the module support?A: The module supports 0-20 mA and 4-20 mA output signals. Q: What electrical current does the module draw from its supplies?A: The module consumes a maximum of 70 mA from the +5 V Modulebus supply and 245 mA from the +24 V external supply. Field Installation Guidelines Install the AO810V2 according to the applicable ABB S800 I/O hardware installation requirements. Verify the module identity and terminal-unit configuration before connecting field wiring. Use field cables suitable for analog current transmission and keep signal wiring separated from high-voltage and high-current conductors. Maintain the specified maximum field cable length of 600 meters. Connect the 0-20 mA or 4-20 mA circuits according to the configured channel function and field-device requirements. Apply the specified grounding and shielding practice for the installation environment. Avoid unintended shield connections that can introduce ground-current paths. Verify the +5 V Modulebus and +24 V external supply connections before commissioning. After energization, check module and channel diagnostics. In particular, investigate channel errors associated with insufficient process supply or output-current deviation. Confirm the analog output value at the field device before placing the associated control loop into service.
$199.00 $99.00
-
ABB AO815 3BSE052605R1 ABB S800 I/O Analog Output Module
ABB AO815 3BSE052605R1 Analog Output Module Configured for 4-20 mA analog signal generation with HART communication, the ABB AO815 3BSE052605R1 (AO815 Analog Output Module) provides eight output channels for direct process signal transmission. The module uses 12 bit resolution, groupwise ground isolation, and a 10 ms update cycle. Hardware Specifications Parameter Specification Model AO815 3BSE052605R1 Spare Model 3BSE052605R1 Brand ABB Product Type Analog Output Module Channels 8 Output Signal 4-20 mA Communication HART Resolution 12 bit Isolation Groupwise isolated from ground Under/Over Range -12.5% / +15% Output Load Max 750 ohm Temperature Drift Max 50 ppm/deg C Input Filter 23 ms (0-90%), max 4 mA / 12.5 ms Update Cycle Time 10 ms Rated Insulation Voltage 50 V Power Dissipation 3.5 W typ. Operating Temp 0 to +55 deg C; approvals: +5 to +55 deg C Storage Temp -40 to +70 deg C Weight 0.3 kg Dimensions 5.1 x 15.2 x 15.2 cm shipping size Origin Sweden ABB S800 I/O Signal and Backplane Characteristics The AO815 belongs to the ABB S800 I/O platform and provides eight 4-20 mA analog output channels with HART support. Each channel generates a controlled current signal for connected process devices. The 12 bit resolution defines the digital-to-analog conversion granularity. Meanwhile, the specified 10 ms update cycle determines the stated output refresh interval. The module provides groupwise isolation from ground and has a rated insulation voltage of 50 V. Therefore, installation should maintain the specified separation between field wiring and other circuit groups. The output stage supports loads up to 750 ohm. Furthermore, the under-range and over-range limits are specified as -12.5% and +15%, respectively. For temperature-dependent accuracy, the specified maximum drift is 50 ppm/deg C. The input filter provides a 23 ms response from 0% to 90%, with the stated 4 mA response value limited to 12.5 ms. Frequently Asked Questions Q: How many analog output channels does the AO815 provide?A: The AO815 provides eight analog output channels, each supporting the specified 4-20 mA signal range with HART communication. Q: What is the maximum permitted output load?A: The specified maximum output load is 750 ohm. Q: Does the AO815 provide electrical isolation?A: Yes. The module specifies groupwise isolation from ground and a rated insulation voltage of 50 V. Field Installation Guidelines Install the module in the designated ABB S800 I/O system position and verify mechanical engagement before energizing the assembly. Confirm that the field terminal arrangement matches the AO815 channel assignment before connecting the 4-20 mA circuits. Route analog signal wiring separately from high-voltage power conductors and high-current switching circuits. Use appropriate shielded instrumentation cable where the installation requires protection against electromagnetic interference. Terminate cable shields according to the site's approved grounding scheme and avoid unintended ground loops. Verify the connected load remains within the specified maximum 750 ohm output load. Check field polarity and loop continuity before commissioning each output channel. Confirm the operating temperature remains within 0 to +55 deg C, while approved installations must observe the stated +5 to +55 deg C approval range. Inspect the module and terminal connections for secure mechanical seating before applying system power. During commissioning, verify each 4-20 mA output against the configured engineering value and confirm HART communication where applicable.
$199.00 $99.00
-
ABB AO820 3BSE008546R1 ABB S800 I/O Analog Output Module
ABB AO820 3BSE008546R1 Analog Output Module The ABB AO820 3BSE008546R1, also cataloged as the AO820 Analog Output Module, provides four configurable bipolar analog output channels for current or voltage signal generation in ABB S800 I/O systems. Each channel uses software configuration to select the required output mode, while separate terminal connections support current and voltage wiring. Hardware Specifications Parameter Specification Model AO820 3BSE008546R1 Spare Model 3BSE008546R1 Brand ABB Product Type Analog Output Module Origin Sweden Weight 0.24 kg Dimensions 4.5 x 11 x 12 cm estimated shipping size Number of Channels 4 bipolar analog output channels Output Type Configurable current or voltage output Resolution 12 bits including sign Under/Over Range +/-15% Output Load <= 550 ohm for current output; >= 5 kohm for voltage output Temperature Drift Max 90 ppm/deg C Rise Time < 0.7 ms Update Cycle Time <= 1.5 ms Rated Insulation Voltage 50 V Diagnostics Output readback, A/D converter communication supervision, open-circuit diagnostics, process voltage supervision ModuleBus Diagnostics Channel error signals available through ModuleBus ABB S800 I/O Signal Handling The AO820 uses four independent bipolar analog output channels. Each channel can operate in current or voltage mode through software configuration. Therefore, the physical wiring must match the selected signal mode because the module provides separate terminal sets for voltage and current outputs. The module also verifies output data through readback from the A/D converters. In addition, it continuously monitors open-circuit conditions. Process voltage supervision detects loss of the required process voltage and reports the resulting channel error through ModuleBus. For ABB S800 I/O installations, the module interfaces with the system backplane and ModuleBus architecture. Consequently, engineering configuration should match the installed I/O station, terminal unit, and configured channel signal type. Frequently Asked Questions Q: How many analog output channels does the AO820 provide?A: The AO820 provides 4 bipolar analog output channels. Each channel can be configured for either current or voltage output. Q: Can the same channel be wired for both current and voltage output simultaneously?A: No. The required output mode is selected through software, and the corresponding terminal set must be wired correctly for that mode. Q: How does the module detect output-related faults?A: The module reads back output data to verify A/D converter communication and continuously performs open-circuit diagnostics. Process voltage supervision also generates channel error information when the monitored voltage disappears. Field Installation Guidelines Confirm the AO820 module identity and terminal arrangement before installation. Verify the configured current or voltage mode for every channel before connecting field wiring. Use the designated terminal connections for the selected signal type; do not interchange current and voltage terminals. Route analog signal wiring separately from high-voltage power and high-current switching conductors to reduce electrical interference. Apply appropriate cable shielding and terminate the shield according to the site's established grounding practice. Verify field-loop polarity and load impedance before energizing the output channels. Confirm that current-output loads remain within the specified load capability and that voltage-output loads meet the stated minimum impedance. After installation, verify channel output values and review ModuleBus diagnostic status for communication, open-circuit, and process-voltage errors. Do not introduce undocumented operating-temperature or power-consumption limits during installation; use the applicable ABB system documentation for those values.
$199.00 $99.00
-
ABB ABB S800 I/O AO845 3BSE023676R1 Analog Output Module
ABB AO845 3BSE023676R1 Analog Output Module Configured for 4-20 mA analog signal generation, the ABB AO845 3BSE023676R1 (AO845 Analog Output Module) provides eight output channels for process control signal transmission. The module uses 12-bit resolution and groupwise isolation from ground. It supports redundant configuration and accepts field loads up to 750 ohm. The specified module insulation voltage is 50 V. Hardware Specifications Parameter Specification Model AO845 3BSE023676R1 Spare Model 3BSE023676R1 Brand ABB Product Type Analog Output Module Origin Sweden Weight 0.2 kg Dimensions 4.5 x 10.5 x 11.8 cm estimated shipping size Operating Temp Not specified in supplied data Power Consumption Typ. 3.5 W Signal Type Analog Output Output Signal 4-20 mA Number of Channels 8 Resolution 12 bit Isolation Groupwise isolated from ground Redundancy Supported Maximum Load 750 ohm Under Range -12.5% Over Range +15% Rated Insulation Voltage 50 V Dielectric Test Voltage 500 V AC Current Consumption, +5 V Modulebus Max. 125 mA Current Consumption, +24 V External 218 mA Tariff Code 8537101190 Manufacturer ABB Shipment Origin Xiamen, China ABB Industrial Control and I/O Characteristics The AO845 operates as an analog output interface within ABB distributed I/O architectures. Each of its eight channels generates a 4-20 mA signal with 12-bit resolution, allowing the control system to represent process values through standardized current transmission. Furthermore, the module provides groupwise isolation from ground and specifies 50 V rated insulation voltage. The 500 V AC dielectric test rating defines the stated insulation test capability. The module supports redundant operation, while the specified 750 ohm load capability permits connection to field devices that remain within the output circuit load limit. Therefore, installation should account for the complete loop resistance, including field wiring and connected equipment. Frequently Asked Questions Q: How many analog output channels does the AO845 provide?A: The AO845 provides 8 analog output channels, with each channel supporting a 4-20 mA signal. Q: What output resolution does the AO845 provide?A: The module provides 12-bit output resolution for its analog channels. Q: What are the specified power consumption and current requirements?A: Typical power dissipation is 3.5 W. Modulebus current consumption is a maximum of 125 mA at +5 V, while external +24 V current consumption is 218 mA. Field Installation Guidelines Verify the module identity and terminal assignment before connecting field wiring. Confirm that the connected field device and complete current loop remain within the specified 750 ohm load limit. Route analog signal wiring separately from high-voltage switching and high-current power conductors where practical. Follow the applicable ABB installation documentation for grounding, shielding, and cabinet bonding. Check polarity before energizing each 4-20 mA output circuit. Verify the control-system configuration against the physical channel assignment before commissioning. For redundant configurations, confirm the installed hardware arrangement and system configuration before applying process signals. Inspect wiring termination and insulation before performing loop checks. Do not exceed the specified 50 V rated insulation voltage or the stated electrical limits.
$199.00 $99.00
-
ABB AO890 3BSC690072R1 S800 Analog Output Module
ABB AO890 S800 Analog Output Module Configured for 8-channel analog current output in S800 I/O systems, the ABB AO890 3BSC690072R1 (AO890 Analog Output Module) provides intrinsically safe 0-20 mA and 4-20 mA signals for direct connection to hazardous-area process equipment. Each channel incorporates intrinsic safety protection and limits overload current to 22 mA. Hardware Specifications Parameter Specification Model AO890 Article Number 3BSC690072R1 Brand ABB Series S800 I/O Module Type Analog Output Origin Not specified in provided data Number of Channels 8 Signal Specification 0-20 mA, 4-20 mA Signal Type Unipolar single ended HART No SOE No Redundancy No High Integrity No Intrinsic Safety Yes Resolution 12 bit Isolation Groupwise isolated from ground Under/Over Range 0 / 22 mA Output Load Less than 725 ohms at 20 mA; less than 625 ohms up to 22 mA Output Error Typ. 0.05%, max. 0.1% at 650 ohms Temperature Drift Typ. 50 ppm/deg C, max. 100 ppm/deg C Rise Time 1 ms, 10% to 90% Current Limiting Short-circuit-proof, current-limited output Rated Insulation Voltage 50 V Dielectric Test Voltage 500 V AC Power Dissipation 3.1 W Current Consumption, +5 V Modulebus 80 mA Current Consumption, +24 V Modulebus Typ. 110 mA, max. less than 150 mA Current Consumption, +24 V External Typ. 220 mA, max. less than 300 mA Compatible MTU TU890, TU891 Keying Code AD Operating Temperature 0 to +55 deg C Storage Temperature -40 to +70 deg C Relative Humidity 5 to 95%, non-condensing Pollution Degree Degree 2, IEC 60664-1 Corrosion Protection ISA-S71.04: G3 Protection Class IP20 according to IEC 60529 Width 45 mm Depth 102 mm; 111 mm including connector Height 119 mm Weight 0.2 kg Power Consumption 3.1 W CE Mark Yes Electrical Safety EN 61010-1, EN 61010-2-201 EMC EN 61000-6-4, EN 61000-6-2 Marine Certifications ABS, BV, DNV, LR RoHS EU RoHS, UAE RoHS, CN RoHS WEEE Directive 2012/19/EU Intrinsic Safety and Process Interface The AO890 places intrinsic safety protection components on every output channel. Therefore, the module can interface directly with suitable Ex-certified process equipment without separate external intrinsic safety devices. Each channel supplies up to 20 mA of loop current to a field load. Typical loads include Ex-certified current-to-pressure converters and other current-operated process devices. During overload, the output limits current to 22 mA. The output circuit provides short-circuit protection and current limiting. Additionally, the module supervises the internal process supply and supports open-wire supervision when the configured threshold exceeds 1 mA. For Ex applications, the TU890 Compact MTU provides the corresponding termination interface. The TU891 Compact MTU supports non-Ex applications. Both MTUs allow two-wire process connections without additional terminal components. ABB specifies hazardous-location compatibility including ATEX/IECEx Zone 2 interfaces to Zone 0 and cFMus hazardous-location configurations. Installation must follow the applicable certification conditions and system documentation. Frequently Asked Questions (FAQ) Q: How many analog output channels does the AO890 provide?A: The AO890 provides 8 unipolar single-ended analog output channels supporting 0-20 mA and 4-20 mA signals. Q: Can the AO890 connect directly to hazardous-area process equipment?A: Yes. Each channel contains intrinsic safety protection components for connection to suitable Ex-certified process equipment. Q: Which MTUs are compatible with the AO890?A: The module supports the TU890 and TU891 Compact MTUs. TU890 is intended for Ex applications, while TU891 supports non-Ex applications. Field Installation Guidelines Mount the AO890 on the specified S800 I/O assembly and install the compatible TU890 or TU891 MTU according to the system configuration. Use TU890 when the application requires the specified Ex interface. Use TU891 for non-Ex process connections. Verify the selected MTU and module keying code before wiring. Route analog output wiring separately from high-voltage power conductors and high-energy switching circuits. Maintain appropriate segregation according to the applicable installation standards. For two-wire process devices, connect the field loop through the designated MTU terminals. Confirm polarity before energizing the output circuit. Where shielded signal cables are used, terminate and ground the shields according to the plant grounding design and applicable EMC requirements. Avoid creating unintended ground loops. Before commissioning, verify the configured 0-20 mA or 4-20 mA range, field-device load, wiring continuity, and process supply supervision. Confirm that the installation satisfies the applicable hazardous-area certification requirements.
$199.00 $99.00
-
ABB CI810A 3BSE013262R1 AF100 Field Communication Interface
ABB CI810A AF100 Field Communication Interface Configured for AF100 field communication in ABB control systems, the ABB EXC3BSE013262R1 (CI810A Communication Module) provides the physical interface required for AF100 network data exchange. The exchange version is identified as CI810A Exchange and relates to product ID 3BSE013262R1. Suffix Breakdown & Model Matrix Parameter Specification Global Commercial Alias CI810A Product ID EXC3BSE013262R1 ABB Type Designation CI810A Exchange Related Product ID 3BSE013262R1 Product Type Communication Module Catalog Description CI810A AF100 Field Comm. Interface Part Type Exchange Product Name Communication Module AF100 Interface Field Communication Interface WEEE Category Product Not in WEEE Scope The supplied ABB data identifies EXC3BSE013262R1 as an exchange part and lists 3BSE013262R1 as the related product ID. No additional suffix decomposition is specified in the source data. Hardware Specifications Parameter Specification Model CI810A / EXC3BSE013262R1 Brand ABB Origin Sweden Weight 0.6 kg net; 0.6 kg gross Communication Function AF100 Field Communication Interface Product Classification Communication Module Frame Size Spare_Parts Minimum Order Quantity 1 piece Order Multiple 1 piece Customs Tariff Number 8517620000 Package Level 1 Units 1 piece Package Level 1 Gross Weight 0.6 kg AF100 Communication Interface Characteristics The CI810A provides an AF100 field communication interface for data exchange within compatible ABB control architectures. Therefore, installation must preserve the specified communication connections and the mechanical position required by the host system. The supplied documentation does not specify communication speed, connector pin assignment, electrical isolation, bus current, or operating temperature. Consequently, these parameters should be verified against the applicable ABB system documentation before commissioning. As an ABB industrial communication module, the hardware interfaces with the system through its designated mounting and communication arrangement. However, the supplied product data does not establish compatibility with Profinet, EtherNet/IP, or other network protocols, so those functions should not be assumed for this model. Frequently Asked Questions Q: What is the primary function of CI810A?A: CI810A provides an AF100 Field Communication Interface for compatible ABB control system communication. Q: Is EXC3BSE013262R1 the same identification as CI810A?A: EXC3BSE013262R1 is the Product ID, while CI810A is the Global Commercial Alias and ABB type designation uses CI810A Exchange. Q: What weight should be considered for handling the module?A: ABB lists both product net weight and package gross weight as 0.6 kg. Field Installation Guidelines Verify the complete part identification before installation: EXC3BSE013262R1, CI810A, and related product ID 3BSE013262R1. Confirm that the replacement module matches the host system configuration and approved ABB documentation. Install the module using the designated mechanical mounting arrangement and avoid excessive mechanical force on connectors. Route AF100 communication wiring separately from high-voltage and high-current conductors where practical. Maintain appropriate cable shielding and grounding according to the system installation specification. Inspect connectors and mating surfaces before energizing the system. Do not apply power until wiring, module position, and system configuration have been checked. Because this item is identified as an exchange part, follow the applicable ABB exchange procedure during replacement.
$199.00 $99.00
-
ABB ABB CI830 3BSE013252R1 PROFIBUS DP Communication Interface
ABB CI830 3BSE013252R1 PROFIBUS DP Communication Interface Configured for PROFIBUS DP-V1 communication in ABB S800 I/O systems, the ABB CI830 3BSE013252R1 (CI830 communication module) provides the physical and electrical interface between the control system and PROFIBUS DP network. It operates at communication speeds up to 12000 kbit/s and uses a 24 V DC supply. Hardware Specifications Parameter Specification Model CI830 3BSE013252R1 Spare Model 3BSE013252R1 Brand ABB Product Type PROFIBUS DP Communication Interface Module Origin Sweden Product Function PROFIBUS DP-V1 Communication Interface Protocol Type PROFIBUS-DP Communication Speed Up to 12000 kbit/s Supply Voltage 24 V DC +/-20 % Current Consumption <= 50 mA Power Consumption Approximately 1.2 W Isolation 500 V DC field-to-bus Operating Temp -20 deg C to +55 deg C Weight 0.45 kg Estimated Shipping Dimensions 16.8 x 8.3 x 12 cm Tariff Code 8537101190 ABB PROFIBUS DP Communication Characteristics The CI830 provides PROFIBUS DP-V1 communication for distributed I/O data exchange. The interface supports communication speeds up to 12000 kbit/s, allowing the module to exchange process data with PROFIBUS DP field devices. The module operates from a 24 V DC supply with a specified tolerance of +/-20 %. Its stated current consumption is no more than 50 mA, corresponding to approximately 1.2 W. Furthermore, the 500 V DC field-to-bus isolation separates the field-side electrical domain from the communication bus. This isolation should be maintained during system wiring and commissioning. For ABB control architectures, PROFIBUS DP communication complements the backplane and I/O communication structure by providing an external fieldbus interface. Therefore, installation should follow the applicable ABB hardware configuration and PROFIBUS network rules. Frequently Asked Questions (FAQ) Q: What PROFIBUS communication speed does the CI830 support?A: The supplied specification lists a maximum communication speed of 12000 kbit/s for the PROFIBUS-DP interface. Q: What supply voltage does the CI830 require?A: The module requires 24 V DC with a specified tolerance of +/-20 %. The stated current consumption is <= 50 mA. Q: What operating temperature range is specified for the CI830?A: The supplied specification states an operating range from -20 deg C to +55 deg C. Field Installation Guidelines Install the CI830 on the designated ABB mounting and base-unit arrangement specified for the system. Verify the 24 V DC supply polarity and voltage range before energizing the module. Route PROFIBUS communication wiring separately from high-current and high-noise power conductors where practical. Maintain the specified PROFIBUS cable shielding and termination arrangement throughout the network. Connect cable shields according to the applicable ABB installation instructions and site grounding design. Inspect connectors for correct seating before commissioning the communication interface. Confirm PROFIBUS node addressing and network configuration before starting process communication. Check the module status indicators after power-up and investigate communication faults before placing the network into service.
$199.00 $99.00
-
ABB ABB CI840 3BSE041882R1 S800 I/O Fieldbus Communication Interface
ABB CI840 3BSE041882R1 S800 I/O Fieldbus Communication Interface Configured for PROFIBUS DP-V1 communication and redundant I/O operation in the ABB S800 I/O system, the ABB CI840 3BSE041882R1 (CI840 Fieldbus Communication Interface) provides the communication path between S800 I/O modules and the parent controller. It performs signal processing, supervision data collection, OSP handling, Hot Configuration In Run, HART pass-through, and I/O module configuration. Hardware Specifications Parameter Specification Model CI840 3BSE041882R1 Brand ABB Product Type S800 I/O Fieldbus Communication Interface System ABB S800 I/O Article Number 3BSE041882R1 Communication Protocol PROFIBUS DP-V1 Master or Slave Slave Line Redundancy Yes Module Redundancy Yes Hot Swap Yes Used with HI Controller Yes Module Termination Unit - Redundant I/O TU846 Module Termination Unit - Non-Redundant I/O TU847 24 V Consumption, Typical 190 mA Operating Temperature 0 to +55 deg C; approvals issued for +5 to +55 deg C Storage Temperature -40 to +70 deg C Maximum Ambient Temperature 55 deg C; 40 deg C for vertical mounting Relative Humidity 5 to 95 %, non-condensing Protection Class IP20 according to EN 60529 and IEC 529 Pollution Degree Degree 2, IEC 60664-1 Corrosion Protection ISA-S71.04: G3 Width 54 mm Height 119 mm Depth 96 mm Weight 0.2 kg Origin Not specified in the provided technical data CE Marking Yes RoHS Compliance EU RoHS, UAE RoHS, CN RoHS WEEE Compliance Directive 2012/19/EU Electrical Safety EN 61010-1, UL 61010-1, EN 61010-2-201, UL 61010-2-201 Hazardous Location Approvals C1 Div 2 cULus, C1 Zone 2 cULus, ATEX Zone 2 Marine Certificates ABS, BV, DNV-GL, LR PROFIBUS DP-V1 and Redundancy The CI840 operates as a PROFIBUS DP-V1 slave on the fieldbus connection to the controller. The module supports both line redundancy and module redundancy, allowing the S800 I/O configuration to use redundant communication paths and interface modules. For redundant I/O installations, ABB specifies the TU846 module termination unit. For non-redundant I/O installations, the TU847 termination unit applies. The CI840 also supports Hot Swap and Hot Configuration In Run functions, subject to the installed system configuration. The FCI manages I/O module configuration and signal-related processing. It also gathers supervision information and supports OSP handling. In addition, the interface provides HART pass-through for compatible I/O configurations. Frequently Asked Questions (FAQ) Q: Which communication protocol does the CI840 use? A: The CI840 communicates with the controller through the PROFIBUS DP-V1 fieldbus and operates as a slave device. Q: Which termination unit is specified for redundant I/O? A: ABB specifies the TU846 for redundant I/O. The TU847 is specified for non-redundant I/O. Q: Does the CI840 support module and line redundancy? A: Yes. The supplied specifications identify both line redundancy and module redundancy as supported functions. Field Installation Guidelines Install the CI840 on the specified S800 I/O termination unit and verify mechanical engagement before applying power. Use the TU846 when the application requires redundant I/O. Use the TU847 for non-redundant I/O configurations. Route PROFIBUS communication wiring separately from high-voltage power conductors and high-current switching circuits. Maintain appropriate separation to reduce electromagnetic interference. Terminate cable shields according to the approved system grounding design. Avoid creating unintended ground loops through multiple shield connection paths. Confirm the available 24 V supply can support the CI840 load and the complete connected I/O assembly. The typical CI840 consumption is 190 mA at 24 V. Before commissioning, verify PROFIBUS addressing, redundancy configuration, termination settings, and controller configuration against the approved system design. Observe the specified ambient temperature and humidity limits during installation. For vertical mounting, keep the ambient temperature within the stated 40 deg C maximum. Maintain the IP20 installation environment and protect the module from conductive contamination, excessive moisture, and mechanical damage.
$199.00 $99.00
-
ABB CI845 3BSE075853R1 ABB Advant OCS 800xA Communication Interface Modules
ABB CI845 3BSE075853R1 Ethernet Fieldbus Communication Interface Module Configured for Ethernet fieldbus communication in ABB Ability System 800xA, the ABB CI845 3BSE075853R1 (CI845 Ethernet Fieldbus Communication Interface Module) provides the physical interface required for fieldbus data exchange. The module supports single or redundant configurations and operates from a 19.2 to 30 V input supply. Hardware Specifications Parameter Specification Model CI845 3BSE075853R1 Base Model CI845 Brand ABB Product Type Ethernet Fieldbus Communication Interface Module System ABB Ability System 800xA Configuration Single or redundant Type Ethernet FCI Module Input Voltage Range 19.2 to 30 V Power Dissipation 5 W Operating Temp -40 deg C to +70 deg C Storage Temp -40 deg C to +85 deg C Relative Humidity 5 to 95 %, non-condensing Weight 0.5 kg Dimensions 18.5 x 6.5 x 12.6 cm, estimated shipping size Origin Sweden Tariff Code 8537101190 Manufacturer ABB Shipment Location Xiamen, China ABB Industrial Ethernet and System 800xA Communication The CI845 provides an Ethernet fieldbus communication interface for ABB Ability System 800xA architectures. System designers can configure the module as a single interface or within a redundant communication arrangement. Furthermore, the module receives its operating supply within the specified 19.2 to 30 V input range and dissipates approximately 5 W under the stated specification. The -40 deg C to +70 deg C operating range supports installation in industrial control environments. The CI845 belongs to ABB's industrial control communication architecture rather than serving as a conventional discrete or analog I/O channel. Therefore, installation should preserve the required Ethernet communication path, module mounting integrity, and electrical grounding arrangement. Frequently Asked Questions Q: Can the CI845 3BSE075853R1 operate in a redundant configuration?A: Yes. The supplied specification identifies the CI845 as suitable for single or redundant configuration. Q: What supply voltage does the CI845 require?A: The specified input voltage range is 19.2 to 30 V. Q: What environmental temperature range does the CI845 support?A: The specified operating range is -40 deg C to +70 deg C, while the storage range is -40 deg C to +85 deg C. Field Installation Guidelines Mount the CI845 securely according to the System 800xA hardware installation arrangement. Verify that the supply voltage remains within the specified 19.2 to 30 V range before energizing the module. Maintain separation between Ethernet communication wiring and high-voltage or high-current conductors. Route communication cables to minimize exposure to electromagnetic interference from drives, contactors, and switching equipment. Connect cable shields and protective earth according to the applicable ABB installation documentation and site grounding design. Provide adequate enclosure ventilation so the module remains within its -40 deg C to +70 deg C operating range. For redundant configurations, verify both communication paths before placing the system into service. Inspect connectors and cable terminations for mechanical retention and correct routing before commissioning.
$199.00 $99.00
-
ABB CI850AK01 3BSE026055R1 ABB AC 800M Interface Kit
ABB CI856K01 S100 I/O Interface Kit The ABB CI856K01 3BSE026055R1, also cataloged as the CI856K01 S100 I/O Interface Kit, provides physical communication between the AC 800M controller and an S100 I/O system through the CEX-Bus. The kit includes the CI856 Communication Interface and TP856 Baseplate. Hardware Specifications Parameter Specification Model CI856K01 3BSE026055R1 Spare Model 3BSE026055R1 Brand ABB Product Type S100 I/O Interface Kit Function Communication between AC 800M and S100 system Included Components CI856 Communication Interface, TP856 Baseplate Maximum Units on CEX-Bus 12 Connector Miniribbon, 36-pin Power Supply 24 V Power Consumption 120 mA typical Operating Temp 55 deg C Protection Class IP20 according to EN 60529, IEC 529 Weight 0.44 kg Estimated Shipping Dimensions 18.7 x 6.5 x 13 cm Origin Sweden AC 800M and S100 I/O Communication The CI856 provides the communication interface required between an AC 800M controller and an S100 I/O system. The interface connects through the CEX-Bus, while the TP856 baseplate provides the physical mounting and connection structure. The configuration supports up to 12 units on the CEX-Bus. In addition, the interface uses a 36-pin Miniribbon connector for connection to the S100 I/O side. The specified typical consumption is 120 mA at 24 V. The TP856 baseplate forms part of the complete CI856K01 kit. Therefore, installation should treat the communication interface and baseplate as the supplied hardware assembly. Frequently Asked Questions Q: What components are included with CI856K01 3BSE026055R1?A: The kit includes one CI856 Communication Interface and one TP856 Baseplate. Q: How many units can the CI856 support on the CEX-Bus?A: The specified maximum is 12 units on the CEX-Bus. Q: What connector does the CI856K01 use?A: The interface uses a 36-pin Miniribbon connector for the specified S100 I/O connection. Field Installation Guidelines Mount the TP856 baseplate securely according to the AC 800M installation arrangement. Install the CI856 communication interface onto the baseplate and verify proper mechanical engagement. Connect the CEX-Bus wiring according to the controller system configuration. Connect the 36-pin Miniribbon interface using the specified mating connector and avoid excessive cable bending. Route communication wiring separately from high-voltage and high-current conductors where practical. Verify the 24 V supply and confirm that the connected load remains within the specified current requirement. Maintain the specified IP20 environmental protection conditions during cabinet installation. Before energizing the system, inspect connectors, mounting points, cable routing, and grounding connections.
$199.00 $99.00
-
ABB CI853K01 3BSE018103R3 ABB AC 800M Communication Interface Modules
ABB CI853K01 Dual RS232-C Interface Configured for serial communication in ABB AC 800M control systems, the ABB CI853K01 3BSE018103R1 (CI853K01 Dual RS232-C Interface) provides two RS232-C communication channels through the CI853 communication interface and TP853 baseplate. The module operates from 24 VDC power and consumes up to 6 W. Hardware Specifications Parameter Specification Model CI853K01 3BSE018103R1 Base Model CI853K01 Brand ABB Product Type Dual RS232-C Interface Spare Model 3BSE018103R1 Communication Interface 2 x RS232-C Communication Ports 2 x RS232-C Baseplate TP853 Power Supply 24 VDC +/- 20% Power Consumption 6 W max Isolation Voltage 500 VAC, input/power Weight 0.44 kg Dimensions 18.7 x 6.7 x 12.7 cm estimated shipping size Operating Temp -20 deg C to +60 deg C Storage Temp -40 deg C to +85 deg C Humidity 5-95% RH, non-condensing Vibration 5-150 Hz, 1 G, IEC 60068-2-6 Origin Sweden ABB AC 800M Communication Interface The CI853K01 provides serial communication through two RS232-C interfaces. Therefore, the physical interface is intended for equipment requiring RS232-C electrical signaling rather than Ethernet-based communication. The CI853 communication interface mounts with the TP853 baseplate. The assembly receives 24 VDC power within the specified +/- 20% range and has a maximum stated power consumption of 6 W. For controller-side communication, the module operates as part of the ABB AC 800M hardware architecture. Consequently, installation should maintain the specified environmental conditions and provide appropriate electrical separation from high-voltage or high-noise wiring. Frequently Asked Questions Q: How many RS232-C communication channels does the CI853K01 provide?A: The CI853K01 provides two RS232-C communication interfaces. Q: What power supply does the CI853K01 require?A: The specified power supply is 24 VDC with an allowable range of +/- 20%. Maximum power consumption is 6 W. Q: What environmental conditions apply to the CI853K01 during operation?A: The specified operating temperature is -20 deg C to +60 deg C. Humidity is 5-95% RH, non-condensing. Field Installation Guidelines Install the CI853 communication interface with the specified TP853 baseplate and verify mechanical engagement before energizing the assembly. Confirm that the supplied power remains within the specified 24 VDC +/- 20% range. Route RS232-C communication cables separately from high-current power conductors and switching circuits where practical. Maintain cable shielding and grounding practices consistent with the connected serial equipment and the site EMC requirements. Verify RS232-C signal wiring and connector assignments before connecting external equipment. Do not exceed the specified operating temperature, humidity, or vibration conditions. Inspect the module and baseplate for mechanical damage before installation. Apply power only after confirming correct wiring, connector seating, and protective grounding arrangements.
$199.00 $99.00
-
ABB CI854 3BSE075853R1 ABB System 800xA Ethernet Fieldbus Communication Interface Module
ABB CI845 3BSE075853R1 Ethernet Fieldbus Communication Interface Module Configured for Ethernet fieldbus communication in System 800xA, the ABB CI845 3BSE075853R1 (CI845 Ethernet Fieldbus Communication Interface Module) provides the physical interface required for controller-to-fieldbus data exchange. The module supports single or redundant configuration and operates from a 19.2 to 30 V input supply. Hardware Specifications Parameter Specification Model CI845 3BSE075853R1 Brand ABB Product Type Ethernet Fieldbus Communication Interface Module Type Ethernet FCI Module System ABB Ability System 800xA Configuration Single or redundant Input Voltage Range 19.2 to 30 V Power Dissipation 5 W Operating Temp -40 deg C to +70 deg C Storage Temp -40 deg C to +85 deg C Relative Humidity 5 to 95 %, non-condensing Weight 0.5 kg Dimensions 18.5 x 6.5 x 12.6 cm estimated shipping size Origin Sweden Manufacturer ABB Ethernet Fieldbus and Redundancy Characteristics The CI845 provides Ethernet fieldbus communication for ABB Ability System 800xA installations. It can operate as a single interface or as part of a redundant communication arrangement. Furthermore, the 19.2 to 30 V input range supports the specified DC supply conditions. The module dissipates 5 W during operation, while the stated operating temperature range extends from -40 deg C to +70 deg C. For industrial network installation, maintain appropriate separation between Ethernet communication wiring and high-current or high-voltage conductors. Use the applicable ABB network architecture and grounding practices for the installed System 800xA configuration. Frequently Asked Questions Q: Can the CI845 3BSE075853R1 operate in a redundant configuration?A: Yes. The supplied product information specifies that the CI845 can operate as either a single or redundant Ethernet Fieldbus Communication Interface Module. Q: What DC supply range does the CI845 require?A: The specified input voltage range is 19.2 to 30 V. Q: What environmental temperature range does the module support?A: The operating range is -40 deg C to +70 deg C, while the storage range is -40 deg C to +85 deg C. Field Installation Guidelines Verify the CI845 model and complete order number before installation. Confirm that the available DC supply remains within the specified 19.2 to 30 V range. Install the module according to the applicable ABB System 800xA hardware arrangement. Route Ethernet communication cables separately from high-current power conductors where practical. Maintain proper cable shielding and grounding according to the plant's industrial Ethernet installation standard. Check connector seating and cable routing before energizing the communication interface. For redundant configurations, verify both communication paths and associated network connections before commissioning. Confirm the ambient temperature remains within -40 deg C to +70 deg C during operation. Do not use the stated shipping dimensions as the physical installation envelope; verify the actual mechanical dimensions from the applicable ABB installation documentation.
$199.00 $99.00
-
ABB CI854A 3BSE030221R1 ABB AC 800M PROFIBUS-DP/V1 Communication Interface
ABB CI854AK01 PROFIBUS-DP/V1 Communication Interface Configured for PROFIBUS-DP/V1 communication within ABB AC 800M systems, the ABB CI854AK01 (CI854 Communication Interface) provides the physical interface between the controller platform and PROFIBUS network devices. The package includes the CI854 communication interface and TP854 baseplate. This model is a legacy spare part and is not intended for new installations. Hardware Specifications Parameter Specification Model CI854AK01 Product ID 3BSE030220R1 Brand ABB Product Type Communication Module Communication Protocol PROFIBUS-DP/V1 Included Components CI854 Communication Interface, TP854 Baseplate Origin Not specified in supplied data Weight 0.7 kg Dimensions 59 mm W x 186 mm H x 127.5 mm D Operating Temp Not specified in supplied data Power Consumption Not specified in supplied data HS Code 851762 Customs Tariff Number 85176200 WEEE Category 5 - Small Equipment Battery Quantity 0 Application Status Spare part for systems placed on the market before July 22, 2017 PROFIBUS-DP/V1 Communication Characteristics The CI854 provides the communication interface required for PROFIBUS-DP/V1 connectivity in an AC 800M system. Therefore, the module handles the interface function while the TP854 provides the associated mounting and connection base. The supplied ABB data identifies the product as a PROFIBUS-DP/V1 interface but does not specify channel count, transmission speed, cable limits, or electrical current consumption. These parameters should therefore be verified against the applicable ABB system documentation before installation. The CI854AK01 also has a specific lifecycle restriction. ABB identifies this version as a non-RoHS 2 compliant spare part for existing systems. For new installations, ABB specifies CI854BK01, Product ID 3BSE069449R1, instead. Frequently Asked Questions Q: What components are included with CI854AK01?A: The package includes one CI854 Communication Interface and one TP854 Baseplate. Q: Can CI854AK01 be used for a new AC 800M installation?A: ABB identifies CI854AK01 as a legacy spare part. For new installations, ABB specifies CI854BK01, Product ID 3BSE069449R1. Q: What environmental operating temperature is specified for CI854AK01?A: The supplied product data does not state an operating temperature range. The applicable ABB hardware manual should be consulted for environmental limits. Field Installation Guidelines Install the CI854 communication interface on the specified TP854 baseplate and verify mechanical engagement before energizing the system. Route PROFIBUS cabling separately from high-voltage power conductors and high-current switching circuits where practical. Maintain appropriate cable shielding and termination according to the PROFIBUS installation specification and the applicable ABB system documentation. Before commissioning, verify the installed module identification, baseplate compatibility, network connections, and controller configuration. Also confirm that the legacy CI854AK01 status is acceptable for the existing system, because ABB specifies CI854BK01 for new installations.
$199.00 $99.00
-
ABB CI854BK01 CI854B+TP854 ABB PROFIBUS DP Communication Interface
ABB CI854BK01 PROFIBUS DP Communication Interface Configured for PROFIBUS DP-V1 master communication in System 800xA, the ABB CI854BK01 (CI854B PROFIBUS DP Communication Interface) provides two PROFIBUS ports for line redundancy and supports redundant master configurations. The package includes the CI854B communication interface and TP854 baseplate. Suffix Breakdown & Model Matrix Parameter Specification Full Model CI854BK01 Base Model CI854B Product Type PROFIBUS DP Communication Interface Package Configuration CI854B + TP854 Baseplate Communication Protocol PROFIBUS DP-V1 Operating Mode Master PROFIBUS Channels 2 Line Redundancy Yes Master Module Redundancy Yes Hot Swap Yes CEX Bus Capacity Maximum 12 units System Compatibility System 800xA 6.0.3.2 and later Compact Control Builder 6.0.0-2 and later Used with HI Controller Yes Hardware Specifications Parameter Specification Model CI854BK01 Brand ABB Origin Not specified in provided data Communication Interface CI854B Baseplate TP854 Communication Protocol PROFIBUS DP-V1 Master or Slave Master Number of Channels 2 Transmission Speed 9.6 to 12000 kbit/s Line Redundancy Yes Module Redundancy Yes Hot Swap Yes Connector 9-pin female DB connector Maximum Units on CEX Bus 12 Typical 24 V Consumption 190 mA Operating Temperature 0 to +55 deg C Storage Temperature -40 to +70 deg C Pollution Degree Degree 2 according to IEC/EN 61131-2 Corrosion Protection G3 compliant to ISA 71.04 Protection Class IP20 according to EN 60529 and IEC 529 CE Marking Yes Marine Certificates ABS, BV, DNV-GL, LR RoHS Compliance EU RoHS, UAE RoHS, CN RoHS WEEE Compliance Directive 2012/19/EU Width 59 mm Height 185 mm Depth 127.5 mm Weight Including Base 700 g PROFIBUS DP and CEX Bus Architecture The CI854B connects an AC 800M controller to PROFIBUS DP field devices through two physical PROFIBUS ports. Each port supports transmission rates from 9.6 to 12000 kbit/s. The interface supports line redundancy by using both PROFIBUS ports. In addition, two CI854B modules can provide PROFIBUS master redundancy. This redundant master configuration can operate together with CPU redundancy and CEX Bus redundancy using BC810. The CI854B mounts on a DIN rail through the TP854 baseplate. It communicates with the AC 800M controller through the CEX Bus and can interface with S800 I/O and other PROFIBUS DP or DP-V1 I/O systems. The PROFIBUS network requires termination at the two outermost nodes. Connectors with integrated termination can provide this function. The terminating connector must remain connected and powered for correct termination operation. Frequently Asked Questions (FAQ) Q: How many PROFIBUS ports does the CI854B provide?A: The CI854B provides two PROFIBUS ports. The two ports support line redundancy within the PROFIBUS network. Q: Can two CI854B modules provide master redundancy?A: Yes. Two CI854B communication interface modules can be configured for PROFIBUS master redundancy. The configuration can also operate with CPU redundancy and CEX Bus redundancy. Q: What is the typical 24 V consumption of the CI854BK01?A: The specified typical 24 V consumption is 190 mA. Field Installation Guidelines Mount the CI854BK01 assembly on a suitable DIN rail using the TP854 baseplate. Connect the interface to the AC 800M CEX Bus according to the applicable system architecture. Connect PROFIBUS cables to the designated 9-pin female DB connectors. Maintain PROFIBUS termination at the two outermost network nodes. When using connector-integrated termination, keep the terminating connector plugged in and powered. Separate PROFIBUS communication wiring from high-current and high-noise power conductors where practical. Follow the applicable PROFIBUS cable shielding and grounding requirements for the installation. Verify the network topology and redundancy configuration before commissioning. Confirm software compatibility with System 800xA 6.0.3.2 or later and Compact Control Builder 6.0.0-2 or later. Observe the specified 0 to +55 deg C operating temperature range during installation and operation.
$199.00 $99.00
-
ABB CI854K01 3BSE025961R1 ABB AC 800M Profibus-DP/V1 Interface Kit
ABB CI854K01 Profibus-DP/V1 Interface Kit Configured for Profibus-DP/V1 communication in AC 800M control systems, the ABB CI854K01 (CI854 Communication Interface) provides the interface hardware required for Profibus-DP/V1 network connectivity. The package includes the CI854 communication interface and TP854 baseplate with a specified width of 60 mm. Product ID 3BSE025961R1 identifies this spare-parts package. Hardware Specifications Parameter Specification Model CI854K01 Base Model CI854 Brand ABB Product ID 3BSE025961R1 Product Type Profibus-DP/V1 Interface Kit Communication Protocol Profibus-DP/V1 Package Contents CI854 Communication Interface; TP854 Baseplate Baseplate TP854 Baseplate Width 60 mm Product Net Weight 0.6 kg Product Net Dimensions 25 cm depth x 15.8 cm height x 8.7 cm width Customs Tariff Number 85389091 Product Status Spare_Parts Replacement Product CI845AK01, 3BSE030220R1 Control Software Requirement for Replacement Version 3.2/1 or later Profibus-DP/V1 Communication Interface The CI854 provides the AC 800M platform with a dedicated Profibus-DP/V1 communication interface. The interface operates as part of the controller communication architecture and uses the TP854 baseplate for physical installation. The supplied package combines the communication interface and baseplate as one ordering unit. Therefore, installation requires the specified TP854 baseplate rather than a separately selected mounting assembly. Because the supplied data does not define baud rate, node capacity, electrical isolation, or current consumption, those parameters should be verified against the applicable ABB hardware manual before system engineering. Frequently Asked Questions Q: What communication protocol does the CI854K01 support?A: The CI854K01 provides Profibus-DP/V1 communication through the CI854 interface. Q: What components are included in the CI854K01 package?A: The package includes one CI854 communication interface and one TP854 baseplate. Q: What is the specified physical width of the TP854 baseplate?A: The supplied product data specifies a TP854 baseplate width of 60 mm. Field Installation Guidelines Install the CI854 communication interface on the specified TP854 baseplate according to the applicable ABB installation documentation. Mount the baseplate on a suitable control cabinet or equipment mounting surface. Maintain adequate clearance for connector access, cable routing, inspection, and module removal. Route Profibus communication cables separately from high-voltage power wiring and high-current switching conductors where practical. Maintain the applicable Profibus cable shielding and grounding arrangement throughout the network. Before energizing the controller system, verify the module position, baseplate compatibility, communication connections, and cable termination. Do not apply undocumented power or signal connections to the interface. The supplied data does not specify operating temperature, power consumption, electrical isolation, or network termination requirements. Confirm these values from the applicable ABB technical documentation before final installation.
$199.00 $99.00
-
ABB ABB CI855 MasterBus 300 Communication Interface
ABB CI855 MasterBus 300 Communication Interface The ABB CI855, also cataloged as the CI855 MasterBus 300 Communication Interface, provides MB 300 communication between AC 800M controllers and existing MasterBus 300 based controllers within System 800xA installations. The interface connects to the CEX-Bus through the TP853 baseplate and supports redundant Ethernet line connections. Hardware Specifications Parameter Specification Model CI855 Brand ABB Product Type MasterBus 300 Communication Interface Article Number 3BSE018106R1 Communication Protocol ABB MasterBus 300 Master or Slave Master Transmission Speed 10 Mbit/s, 200 datasets/s Line Redundancy Yes Module Redundancy No Hot Swap Yes Used Together with HI Controller Yes Maximum Units on CEX-Bus 12 Baseplate TP853 Connector RJ-45 female, 8-pin Ethernet Ports 2 Network Redundancy Supported through two Ethernet ports Power Consumption Typical 150 mA at 24 V Operating Temperature 0 deg C to +55 deg C Storage Temperature -40 deg C to +70 deg C Corrosion Protection G3 compliant to ISA 71.04 Protection Class IP20 according to EN 60529 and IEC 529 CE Marking Yes Marine Certificates BV, DNV-GL, LR RoHS Compliance EU RoHS, UAE RoHS, CN RoHS WEEE Compliance Directive 2012/19/EU Width 59 mm Height 185 mm Depth 127.5 mm Weight Including Base 700 g Origin ABB manufacturing origin not specified in the supplied data MasterBus 300 Communication and Industrial Network Integration The CI855 implements ABB MasterBus 300 communication within the AC 800M controller environment. It connects through the CEX-Bus and uses the TP853 baseplate for physical installation and Ethernet network connections. The interface operates as an MB 300 master and supports a transmission speed of 10 Mbit/s with up to 200 datasets/s. Furthermore, line redundancy supports redundant network communication, while module redundancy is not specified for the CI855. The interface allows peer-to-peer communication between System 800xA plant sections using AC 800M controllers and existing MB 300 based controller sections. Supported legacy controller platforms include Advant Controller 410, Advant Controller 450, and MasterPiece 200/1. For ABB industrial control architectures, the CEX-Bus provides the local communication path between the AC 800M controller and the CI855 interface. The specified maximum is 12 units on the CEX-Bus. Frequently Asked Questions (FAQ) Q: Does the CI855 support hot swapping?A: Yes. The supplied specifications identify the CI855 as supporting hot swap operation. Site procedures should still follow the applicable AC 800M and System 800xA maintenance requirements. Q: Does the CI855 provide module redundancy?A: No. The supplied data specifies line redundancy as supported, while module redundancy is specified as not supported. Q: How does the CI855 connect to the MB 300 network?A: The CI855 uses the TP853 baseplate, which provides two RJ-45 Ethernet connectors. The two ports support network redundancy within the MB 300 communication arrangement. Field Installation Guidelines Mount the TP853 baseplate on a suitable DIN rail with adequate mechanical clearance. Install the CI855 onto the baseplate according to the AC 800M hardware installation procedure. Connect the CEX-Bus interface through the designated baseplate connection. Use the specified RJ-45 Ethernet interfaces for MB 300 network connections. Route communication cables separately from high-voltage and high-current power wiring where practical. Maintain appropriate cable bend radius and prevent excessive mechanical loading on RJ-45 connectors. Apply the site grounding and shielding practices specified for the System 800xA installation. Verify the redundant network topology before placing the CI855 into service. Confirm the CEX-Bus unit count remains within the specified maximum of 12 units. Check ambient temperature and enclosure conditions against the specified 0 deg C to +55 deg C operating range. For corrosive environments, verify that the installation conditions remain within the stated G3 corrosion classification. Perform communication diagnostics after installation before connecting the interface to operational MB 300 controller sections.
$199.00 $99.00
لقد شاهدت 360 من أصل 1117 منتجًا