Sensors and probes provide accurate monitoring for industrial equipment. Our range covers vibration, proximity, and displacement probes from leading manufacturers. We deliver both current and discontinued models with trusted global support.
Sensors & Probes
-
Bently Nevada Bently Nevada 330104‑07‑14‑05‑01‑00 | 3300 XL Series | 8 mm Proximity Probe
Overview The Bently Nevada 330104‑07‑14‑05‑01‑00 proximity probe is part of the 3300 XL 8 mm transducer system, designed for high‑accuracy shaft vibration and position measurement in fluid‑film bearing machinery. This model features an armored cable assembly and an M10 × 1 threaded housing, providing mechanical protection and installation flexibility in demanding industrial environments. Key Characteristics 8 mm eddy‑current probe for displacement and vibration monitoring M10 × 1 threaded stainless‑steel body with protective armor Integrated cable design—no separate extension cable required Minimum unthreaded length: 70 mm Minimum case length: 140 mm Factory‑calibrated for AISI 4140 steel; optional calibration for other materials 0.5‑meter coaxial cable with ClickLoc miniature connector and protective cover Suitable for hazardous industrial environments Technical Specifications Parameter Specification Model / Part Number 330104‑07‑14‑05‑01‑00 Probe Type 3300 XL 8 mm Proximity Probe Thread Size M10 × 1 Minimum Unthreaded Length 70 mm Minimum Case Length 140 mm Cable Length 0.5 m (1.6 ft) Cable Type Armored, integrated design Connector Type Miniature coaxial ClickLoc with protective cover Calibration Factory‑set for AISI 4140 steel Measurement Principle Eddy‑current displacement Output Voltage proportional to probe‑target gap Weight 0.06 kg Dimensions 1.8 × 1.6 × 123 cm System Compatibility 3300 XL Proximity Transducer System Condition Brand New Origin USA MOQ 1 HS Code 8537101190 Functional Description The 330104‑07‑14‑05‑01‑00 probe is engineered for precise displacement measurement in rotating machinery. Its armored cable construction protects against abrasion, oil exposure, and mechanical stress, making it suitable for harsh industrial environments. The integrated cable eliminates the need for a separate extension cable, simplifying installation and reducing potential failure points. The probe is factory‑calibrated for AISI 4140 steel, the standard target material for Bently Nevada systems. Custom calibration options allow adaptation to alternative shaft materials when required. The ClickLoc connector ensures secure electrical contact and includes a protective cover to prevent contamination. When paired with a 3300 XL Proximitor sensor, the probe supports accurate monitoring of: Shaft radial vibration Axial position Thermal growth Keyphasor phase reference Overspeed and tachometer applications (with proper configuration) Application Scenarios Steam and gas turbines Centrifugal compressors Industrial pumps and fans Gearboxes and generators Machinery requiring armored probe assemblies FAQ Q: Can this probe be used for tachometer or overspeed applications? A: Yes, but proper configuration is required. Refer to the relevant Bently Nevada application notes. Q: Does this model require a separate extension cable? A: No. It uses an integrated armored cable assembly. Q: Can the probe be calibrated for materials other than AISI 4140? A: Yes. Custom calibration is available upon request.
$200.00 $100.00
-
Bently Nevada Bently Nevada 330104‑00‑20‑10‑01‑05 | 3300 XL Series | 8 mm Proximity Probe
Overview The Bently Nevada 330104‑00‑20‑10‑01‑05 proximity probe is part of the 3300 XL 8 mm transducer family, engineered for accurate displacement and vibration measurement in fluid‑film bearing machinery. Its armored construction and reinforced PPS sensing tip provide enhanced durability for installations exposed to mechanical stress, contamination, or elevated temperatures. Key Characteristics 8 mm probe tip with molded PPS encapsulation for improved coil protection M10 × 1 threaded stainless‑steel housing with armor 1.5‑meter integrated coaxial cable with ClickLoc miniature connector Designed for static position, dynamic vibration, and Keyphasor reference measurements Fully interchangeable with 3300 XL and legacy 3300 5 mm / 8 mm components Suitable for hazardous environments with CSA, ATEX, and IECEx approvals Optimized for long‑term reliability in demanding industrial applications Technical Specifications Parameter Specification Model / Part Number 330104‑00‑20‑10‑01‑05 Probe Type 3300 XL 8 mm Proximity Probe Thread Size M10 × 1 Housing Stainless steel with armor Tip Material PPS molded plastic Cable Length 1.5 m (4.9 ft) Connector Type Miniature coaxial ClickLoc Measurement Principle Eddy‑current displacement Output Voltage proportional to probe‑target gap Interchangeability XL and non‑XL 3300 5 mm / 8 mm systems Certifications CSA, ATEX, IECEx Weight 0.06 kg Dimensions 1.8 × 1.6 × 123 cm System Compatibility 3300 XL Proximity Transducer System Condition Brand New Origin USA MOQ 1 HS Code 8537101190 Functional Description The 330104‑00‑20‑10‑01‑05 probe is engineered for high‑accuracy eddy‑current displacement measurement. Its armored cable and reinforced PPS tip provide mechanical protection in harsh environments, while the M10 × 1 threaded body supports secure installation in confined or high‑vibration locations. The probe forms part of a three‑component transducer system—probe, extension cable, and Proximitor sensor. When installed as a matched set, it delivers precise monitoring of: Shaft radial vibration Axial position Thermal growth Keyphasor phase reference Speed measurement The probe’s electrical and physical interchangeability with legacy 3300 components simplifies system upgrades and maintenance. Its hazardous‑area certifications support deployment in oil & gas, power generation, and process industries. Application Scenarios Steam and gas turbines Centrifugal compressors Industrial pumps and fans Gearboxes and generators Machinery requiring armored probe construction FAQ Q: Can this probe replace older 3300 5 mm or 8 mm probes? A: Yes. It is electrically and mechanically compatible when installed with matched cable lengths. Q: What advantage does the armored version provide? A: Armor protects the cable from abrasion, mechanical impact, and routing stress. Q: Is this probe suitable for hazardous locations? A: Yes. It carries CSA, ATEX, and IECEx approvals.
$200.00 $100.00
-
Bently Nevada Bently Nevada 330703‑000‑100‑10‑11‑00 | 3300 XL Series | 11 mm Proximity Probe
Overview The Bently Nevada 330703‑000‑100‑10‑11‑00 proximity probe is part of the 3300 XL 11 mm transducer family, designed for high‑accuracy displacement and vibration measurement in fluid‑film bearing machinery. Its larger 11 mm tip provides an extended linear range, making it suitable for applications requiring greater measurement clearance or higher vibration amplitudes. Key Characteristics 11 mm probe tip for extended linear range M14 × 1.5 threaded body, non‑armored configuration Minimum unthreaded length: 0 mm Minimum probe length: 100 mm 1.0‑meter coaxial cable with ClickLoc miniature connector and connector protector Designed for static position, dynamic vibration, and Keyphasor reference measurements Compatible with 3300 XL extension cables and Proximitor sensors Built to meet regional installation requirements while maintaining global 3300 XL performance standards Technical Specifications Parameter Specification Model / Part Number 330703‑000‑100‑10‑11‑00 Probe Type 3300 XL 11 mm Proximity Probe Thread Size M14 × 1.5 Minimum Unthreaded Length 0 mm Minimum Probe Length 100 mm Cable Length 1.0 m (3.3 ft) Connector Type Miniature coaxial ClickLoc with protector Measurement Principle Eddy‑current displacement Output Voltage proportional to probe‑target gap Target Material Conductive (typically 4140 steel) Weight 0.08 kg Dimensions 116 × 2.5 × 2 cm System Compatibility 3300 XL Proximity Transducer System Condition Brand New Origin USA MOQ 1 HS Code 8537101190 Functional Description The 330703‑000‑100‑10‑11‑00 probe operates as part of a three‑component transducer system consisting of the probe, extension cable, and Proximitor sensor. Its eddy‑current sensing technology produces a voltage proportional to the distance between the probe tip and the rotating shaft surface, enabling accurate monitoring of: Shaft radial vibration Axial position Thermal growth Keyphasor phase reference Speed measurement The 11 mm probe design offers a wider linear range than 5 mm or 8 mm probes, making it suitable for large‑shaft machinery or applications with higher displacement amplitudes. The ClickLoc connector ensures secure electrical contact, while the probe’s construction supports installation in demanding industrial environments. Application Scenarios Steam and gas turbines Large compressors High‑speed rotating machinery Power generation and process industries Installations requiring extended linear range or region‑specific configurations FAQ Q: Is this probe compatible with standard 3300 XL systems? A: Yes. It integrates seamlessly with 3300 XL extension cables and Proximitor sensors. Q: What advantages does an 11 mm probe offer? A: It provides a wider linear range, making it ideal for large‑shaft or high‑displacement applications. Q: Can this probe be used for Keyphasor measurements? A: Yes. When paired with the appropriate Proximitor module, it supports phase reference and speed measurement.
$200.00 $100.00
-
Bently Nevada Bently Nevada 330102‑00‑20‑15‑02‑00 | 3300 XL Series | 8 mm Proximity Probe
Overview The Bently Nevada 330102‑00‑20‑15‑02‑00 proximity probe is part of the 3300 XL 8 mm transducer family, engineered for precise shaft vibration and position measurement in fluid‑film bearing machinery. Its eddy‑current sensing technology delivers stable, linear output suitable for both protection and diagnostic applications in high‑value rotating equipment. Key Characteristics 8 mm probe tip optimized for API 670‑compliant installations 3/8‑24 UNF stainless steel threaded housing Minimum case length of 2 inches for compact mounting locations 1.5‑meter coaxial cable with ClickLoc miniature connector Fully interchangeable with 3300 XL and legacy 3300 components Designed for static position, dynamic vibration, and Keyphasor reference measurements Rugged construction for harsh industrial environments Technical Specifications Parameter Specification Model / Part Number 330102‑00‑20‑15‑02‑00 Probe Type 3300 XL 8 mm Proximity Probe Thread Size 3/8‑24 UNF Minimum Case Length 2 in Cable Length 1.5 m Connector Type Miniature coaxial ClickLoc Sensitivity 200 mV/mil Power Supply −24 V DC (via Proximitor sensor) Measurement Principle Eddy‑current displacement Operating Temperature −20°C to +80°C Housing Material Stainless steel Weight 1.48 kg Dimensions 28 × 26 × 6 cm System Compatibility 3300 XL Proximity Transducer System Interchangeability XL and non‑XL 3300 series Condition Brand New Origin USA MOQ 1 HS Code 8537101190 Functional Description The 330102‑00‑20‑15‑02‑00 probe forms part of a three‑component transducer system consisting of the probe, extension cable, and Proximitor sensor. The probe generates a voltage proportional to the distance between the probe tip and the rotating shaft surface, enabling accurate monitoring of: Shaft radial vibration Axial position Thermal growth Keyphasor phase reference Speed measurement Its stainless steel housing and armored cable options support installation in demanding environments. The probe maintains the same mounting pattern as earlier 3300 designs, simplifying upgrades and retrofits. With standardized electrical characteristics and full component interchangeability, the probe ensures consistent performance across new and existing systems. Application Scenarios Steam and gas turbines Centrifugal compressors Industrial pumps Gearboxes and generators Oil & gas, power generation, and heavy industrial machinery FAQ Q: Is this probe compatible with older 3300 systems? A: Yes. It is electrically and mechanically interchangeable with both XL and non‑XL 3300 components when matched by cable length. Q: What is the typical linear range of an 8 mm probe? A: Approximately 2 mm, depending on calibration and target material. Q: Can this probe be used for Keyphasor applications? A: Yes. When paired with the appropriate Proximitor module, it supports phase reference and speed measurement.
$200.00 $100.00
-
Bently Nevada Bently Nevada 21747‑085‑01 | 3300 XL Series | Proximitor Probe Extension Cable
Overview The Bently Nevada 21747‑085‑01 extension cable is designed for use within the 3300 XL Proximity Transducer System, providing stable signal transmission between proximity probes and Proximitor sensors. Its construction supports long‑distance routing in industrial environments while maintaining signal integrity required for accurate vibration and position measurements. Key Characteristics 85‑ft (25.9‑m) shielded extension cable Designed for eddy‑current proximity probe systems High‑temperature and high‑voltage tolerance Fully compatible with 3300 XL and legacy 3300 5 mm / 8 mm components Copper‑braid shielding for noise reduction Suitable for harsh industrial environments Technical Specifications Parameter Specification Model / Part Number 21747‑085‑01 Cable Type Proximitor Probe Extension Cable Length 85 ft (25.9 m) Voltage Rating 300 V AC/DC Capacitance ≤95 pF/m (≤29 pF/ft) Minimum Bend Radius 75 mm (3 in) Shielding 95% copper braid Temperature Range −40°C to +150°C (−40°F to 302°F) Weight 0.08 kg Dimensions 112 × 1.5 × 1.2 cm System Compatibility 3300 XL Proximity Transducer System Interchangeability Compatible with non‑XL 3300 5 mm / 8 mm systems Condition Brand New Origin USA MOQ 1 HS Code 8537101190 Functional Description The 21747‑085‑01 extension cable is engineered to maintain the electrical characteristics required for accurate eddy‑current displacement measurements. Its low capacitance and high shielding efficiency ensure minimal signal degradation over long distances, making it suitable for installations where probes must be routed through complex machinery layouts. The cable’s copper‑braid shielding minimizes electromagnetic interference, while its wide temperature tolerance supports operation near hot process equipment. Although the 3300 XL Proximitor Sensor uses updated packaging, this cable retains the same mounting footprint and routing requirements as earlier 3300 systems, provided the minimum bend radius is maintained. Application Scenarios Turbines and compressors Pumps and industrial fans Gearboxes and generators Machinery requiring long‑distance probe‑to‑sensor routing API 670‑compliant vibration monitoring systems FAQ Q: Can this cable be used with older 3300 proximity probes? A: Yes. The cable is electrically and mechanically compatible with non‑XL 3300 5 mm and 8 mm components. Q: Does cable length affect calibration? A: No. The 3300 XL system is designed for component interchangeability, provided the probe, extension cable, and Proximitor sensor are matched by length. Q: Is the shielding adequate for high‑noise environments? A: The 95% copper‑braid shield provides strong EMI protection suitable for heavy industrial settings.
$200.00 $100.00
-
Bently Nevada Bently Nevada 330101‑00‑53‑05‑02‑05 | 3300 XL Series | 8 mm Proximity Probe
Overview The Bently Nevada 330101‑00‑53‑05‑02‑05 proximity probe is part of the 3300 XL 8 mm sensing platform, engineered for precise shaft vibration and position measurement in fluid‑film bearing machinery. Its eddy‑current measurement technology provides stable, linear output across a wide operating range, making it suitable for both protection and diagnostic applications. Key Characteristics 8 mm probe tip optimized for standard API 670‑compliant installations 3/8‑24 UNF threaded body, non‑armored configuration 0.5 m integrated coaxial cable with ClickLoc miniature connector Designed for static position, dynamic vibration, and Keyphasor reference measurements Fully interchangeable components within the 3300 XL system Certified for hazardous locations (CSA, ATEX, IECEx) Manufactured in the USA with strict quality control Technical Specifications Parameter Specification Model / Part Number 330101‑00‑53‑05‑02‑05 Probe Type 3300 XL 8 mm Proximity Probe Thread Size 3/8‑24 UNF Minimum Case Length 5.3 in Cable Length 0.5 m (1.6 ft) Connector Type Miniature coaxial ClickLoc Measurement Principle Eddy‑current displacement Output Voltage proportional to probe‑target gap Target Material Conductive (typically 4140 steel) Weight 0.06 kg Dimensions 1.8 × 1.6 × 123 cm System Compatibility 3300 XL Proximity Transducer System Certifications CSA, ATEX, IECEx API 670 Compliance Yes Condition Brand New Origin USA MOQ 1 HS Code 8537101190 Functional Description The 330101‑00‑53‑05‑02‑05 probe operates as part of a three‑component transducer system consisting of the probe, extension cable, and Proximitor sensor. The probe generates a voltage output proportional to the distance between the probe tip and the rotating shaft surface, enabling accurate monitoring of: Shaft radial vibration Axial position Thermal growth Keyphasor phase reference Speed measurement The 8 mm probe design offers a well‑defined linear range suitable for most industrial rotating machinery. Its ClickLoc connector ensures secure electrical contact, while the non‑armored cable configuration supports installations in protected routing environments. Application Scenarios Steam and gas turbines Centrifugal compressors Industrial pumps Gearboxes and generators High‑speed rotating equipment requiring API‑compliant monitoring FAQ Q: Is the probe compatible with older 3300 systems? A: Yes. The 3300 XL series maintains backward compatibility when used with matched extension cables and Proximitor sensors. Q: What is the typical linear range of an 8 mm probe? A: The 8 mm probe typically provides a linear range of approximately 2 mm, depending on calibration and target material. Q: Can this probe be used for Keyphasor applications? A: Yes. The probe supports phase reference and speed measurement when paired with the appropriate Proximitor module.
$200.00 $100.00
-
Bently Nevada Bently Nevada | 330704-000-040-10-02-05 | 3300 XL 11 mm Proximity Probe
Overview The Bently Nevada 330704‑000‑040‑10‑02‑05 proximity probe is part of the 3300 XL 11 mm sensing platform, engineered for high‑accuracy shaft vibration and position measurement in fluid‑film bearing machinery. Its mechanical design, electrical characteristics, and environmental robustness make it suitable for continuous monitoring and protection systems in demanding industrial environments. Key Features 11 mm tip diameter for extended linear range and improved signal stability M14 × 1.5 threaded body with armored construction for mechanical protection Standard 1.0 m coaxial probe cable with ClickLoc miniature connector Compatible with 3300 XL extension cables and Proximitor sensors Designed for static position, dynamic vibration, and Keyphasor reference measurements Suitable for turbines, compressors, pumps, and high‑speed rotating equipment Manufactured in the USA with full compliance to global instrumentation standards Technical Specifications Parameter Specification Model / Part Number 330704‑000‑040‑10‑02‑05 Probe Type 3300 XL 11 mm Proximity Probe Thread Size M14 × 1.5 Minimum Unthreaded Length 0 mm Minimum Total Length 40 mm Cable Length 1.0 m (3.3 ft) Connector Type Miniature coaxial ClickLoc System Compatibility 3300 XL Proximity Transducer System Output Characteristics Voltage proportional to probe‑target gap Target Material Conductive (typically 4140 steel) Weight 0.16 kg HS Code 8537101190 Dimensions 2 × 2 × 119 cm Operating Status Active, not discontinued Origin USA Minimum Order Quantity 1 Functional Description The 330704‑000‑040‑10‑02‑05 probe operates as part of a three‑component transducer system consisting of the probe, extension cable, and Proximitor sensor. When installed, the probe generates a precise voltage output proportional to the distance between the probe tip and the rotating shaft surface. This enables accurate monitoring of: Shaft radial vibration Axial position Thermal growth Keyphasor phase reference Speed measurement The armored cable and ClickLoc connector ensure long‑term reliability in high‑temperature, high‑vibration, or oil‑contaminated environments. The probe’s 11 mm design provides a wider linear range compared to 5 mm or 8 mm probes, making it ideal for large‑shaft or high‑displacement applications. Application Scenarios Steam and gas turbines Centrifugal compressors Industrial pumps Gearboxes and generators High‑speed rotating machinery requiring API‑670 compliant monitoring FAQ Q: Can this probe be used with older 3300 systems? A: Yes. The 3300 XL series maintains backward compatibility with legacy 3300 extension cables and Proximitor sensors when installed as a matched set. Q: What is the typical linear range of an 11 mm probe? A: The 11 mm probe typically provides a linear range of approximately 4 mm, depending on the target material and system calibration. Q: Is the probe suitable for Keyphasor applications? A: Yes. The probe supports phase reference and speed measurement when paired with the appropriate Proximitor module.
$200.00 $100.00
-
Bently Nevada Bently Nevada 330103‑00‑17‑10‑02‑CN | 3300 XL Series | 8 mm Proximity Probe
Overview The Bently Nevada 330103‑00‑17‑10‑02‑CN proximity probe is part of the 3300 XL 8 mm transducer family, engineered for high‑accuracy shaft vibration and position measurement in fluid‑film bearing machinery. Built with a stainless‑steel housing and an M10 × 1 threaded configuration, this model provides stable performance in demanding industrial environments while maintaining full compatibility with the 3300 XL monitoring platform. Key Characteristics 8 mm eddy‑current probe for displacement and vibration monitoring M10 × 1 threaded stainless‑steel body with 17 mm case length Integrated 1.0‑meter coaxial cable with ClickLoc miniature connector Wide operating temperature range: −52°C to +177°C (extendable to +218°C with ETR components) Lightweight construction for simplified installation Fully compatible with all 3300 XL proximity transducer components Suitable for both static position and dynamic vibration measurement Technical Specifications Parameter Specification Model / Part Number 330103‑00‑17‑10‑02‑CN Probe Type 3300 XL 8 mm Proximity Probe Thread Size M10 × 1 Case Length 17 mm Cable Length 1.0 m Connector Type Miniature coaxial ClickLoc Operating Temperature −52°C to +177°C (up to +218°C with ETR) Measurement Principle Eddy‑current displacement Output Voltage proportional to probe‑target gap Weight 0.06 kg Dimensions 1.8 × 1.6 × 123 cm System Compatibility 3300 XL Proximity Transducer System Condition Brand New Origin USA MOQ 1 HS Code 8537101190 Functional Description The 330103‑00‑17‑10‑02‑CN probe is designed to deliver precise displacement and vibration measurements for rotating machinery. Its stainless‑steel housing and compact mechanical profile support installation in confined or high‑density equipment layouts. The integrated 1‑meter cable eliminates the need for a separate extension cable in many applications, simplifying installation and reducing potential failure points. The probe’s sensing element generates a voltage proportional to the distance between the probe tip and the conductive target surface, enabling accurate monitoring of: Shaft radial vibration Axial position Thermal growth Keyphasor phase reference Its wide temperature capability and rugged construction make it suitable for turbines, compressors, pumps, and other critical assets operating in harsh industrial environments. The probe maintains full electrical and mechanical compatibility with all 3300 XL components, ensuring seamless integration into existing systems without requiring matched sets or recalibration. Application Scenarios Steam and gas turbines Centrifugal compressors Industrial pumps and fans Gearboxes and generators Machinery requiring high‑temperature probe operation FAQ Q: What does the “CN” suffix indicate It identifies a configuration tailored for regional installation requirements while maintaining full 3300 XL compatibility. Q: Can this probe be used in high‑temperature environments Yes. It supports up to +177°C, and up to +218°C when used with ETR components. Q: Is this probe compatible with older 3300 systems Yes. It integrates seamlessly with both XL and legacy 3300 components.
$200.00 $100.00
-
Bently Nevada Bently Nevada 330130‑085‑10‑05 Standard Extension Cable
Overview The Bently Nevada 330130‑085‑10‑05 is an 8.5‑meter standard extension cable designed for use with the 3300 XL Proximity Transducer System. Engineered for high‑temperature, high‑vibration, and hazardous‑area environments, the cable ensures stable signal transmission between 8 mm proximity probes and Proximitor sensors. Its rugged construction and controlled electrical characteristics support accurate displacement and vibration measurements in critical rotating machinery. Key Characteristics 8.5‑meter triaxial extension cable for 3300 XL systems FluidLoc PFA‑insulated construction for high‑temperature and oil‑resistant performance Maintains 75‑ohm characteristic impedance for accurate eddy‑current measurements Armored design for mechanical protection in harsh industrial environments Certified for ATEX, IECEx, and CSA hazardous‑area installations Compatible with 8 mm probes and standard 3300 XL Proximitor sensors Technical Specifications Parameter Specification Model / Part Number 330130‑085‑10‑05 Cable Type 3300 XL Standard Extension Cable Length 8.5 m Impedance 75 Ω triaxial Capacitance ~69.9 pF/m Insulation PFA FluidLoc high‑temperature insulation Temperature Range −35°C to +200°C Construction Armored for mechanical protection Certifications ATEX, IECEx, CSA Weight 1.48 kg Dimensions 28 × 26 × 6 cm System Compatibility 3300 XL Proximity Transducer System Condition Brand New Origin USA MOQ 1 HS Code 8537101190 Functional Description The 330130‑085‑10‑05 extension cable is engineered to maintain signal integrity over long distances in demanding industrial environments. Its 75‑ohm triaxial design ensures proper impedance matching with 3300 XL Proximitor sensors, minimizing signal distortion and preserving measurement accuracy. The cable features FluidLoc insulation, which prevents oil and fluid migration through the cable interior—an essential requirement for lubrication‑rich environments such as turbines, compressors, and gearboxes. Its armored construction provides additional protection against abrasion, mechanical impact, and routing stress. When paired with 3300 XL 8 mm probes, the cable supports accurate displacement and vibration monitoring for machinery protection systems. While compatible with legacy 3300 components, mixing XL and non‑XL parts may limit performance to older specifications. Application Scenarios Steam and gas turbines Centrifugal compressors Industrial pumps and fans Gearboxes and generators High‑temperature or hazardous‑area installations Long‑distance probe‑to‑monitor routing FAQ Q: Can this cable be used with non‑XL 3300 components Yes, but performance will match the older 3300 specifications rather than full XL capability. Q: What advantage does FluidLoc insulation provide It prevents oil migration through the cable, improving long‑term reliability in lubrication‑rich environments. Q: Is the cable suitable for hazardous locations Yes. It carries ATEX, IECEx, and CSA certifications.
$200.00 $100.00
-
Bently Nevada Bently Nevada 330101‑00‑12‑20‑12‑CN | 3300 XL Series | 8 mm Proximity Probe
Overview The Bently Nevada 330101‑00‑12‑20‑12‑CN proximity probe is part of the 3300 XL 8 mm transducer family, engineered for high‑accuracy shaft vibration and position measurement in fluid‑film bearing machinery. This model is built to meet regional configuration requirements while maintaining full compatibility with the global 3300 XL platform. Its durable mechanical design and stable electrical characteristics ensure dependable performance in harsh industrial environments. Key Characteristics 8 mm eddy‑current probe for displacement and vibration monitoring 3/8‑24 UNF threaded stainless‑steel housing Minimum unthreaded length: 0 in Case length: 1.2 in Integrated 2.0‑meter coaxial cable for flexible installation FluidLoc cable construction for oil‑resistant performance Miniature ClickLoc connector for secure electrical connection Fully interchangeable with all 3300 XL and legacy 3300 5 mm / 8 mm components Technical Specifications Parameter Specification Model / Part Number 330101‑00‑12‑20‑12‑CN Probe Type 3300 XL 8 mm Proximity Probe Thread Size 3/8‑24 UNF Minimum Unthreaded Length 0 in Case Length 1.2 in Cable Length 2.0 m Cable Type FluidLoc oil‑resistant cable Connector Type Miniature coaxial ClickLoc Measurement Principle Eddy‑current displacement Calibration Factory‑set for AISI 4140 steel (other materials optional) Weight 0.06 kg Dimensions 1.8 × 1.6 × 123 cm System Compatibility 3300 XL Proximity Transducer System Condition Brand New Origin USA MOQ 1 HS Code 8537101190 Functional Description The 330101‑00‑12‑20‑12‑CN probe is designed for precise vibration and shaft position measurement in rotating machinery. Its 2‑meter cable provides installation flexibility, allowing the probe to be positioned optimally without compromising signal quality. The FluidLoc cable construction prevents oil migration through the cable interior, making it suitable for lubrication‑rich environments such as turbines and compressors. The probe maintains the required side‑view clearances and tip‑to‑tip spacing associated with 8 mm probes, ensuring compatibility with standard mounting geometries. Its ClickLoc connector provides a secure, vibration‑resistant electrical interface, reducing the risk of accidental disconnection. As part of the 3300 XL system, the probe is fully interchangeable with extension cables and Proximitor sensors, eliminating the need for matched components or bench calibration. This simplifies installation, maintenance, and system upgrades. Application Scenarios Steam and gas turbines Centrifugal compressors Industrial pumps and fans Gearboxes and generators Machinery requiring standard 8 mm probe spacing FAQ Q: What does the “CN” suffix indicate It denotes a configuration tailored for regional installation requirements while maintaining full 3300 XL compatibility. Q: Is this probe compatible with older 3300 systems Yes. It is fully interchangeable with both XL and non‑XL 3300 5 mm and 8 mm components. Q: What advantage does the FluidLoc cable provide It prevents oil migration through the cable, improving long‑term reliability in lubrication‑rich environments.
$200.00 $100.00
-
Bently Nevada Bently Nevada 330701‑00‑30‑10‑02‑05 11 mm Proximity Probe
Overview The Bently Nevada 330701‑00‑30‑10‑02‑05 proximity probe is a long‑range 11 mm sensor designed for the 3300 XL Proximity Transducer System. With a 30‑meter integrated cable and a wide operating temperature range, it is engineered for installations requiring extended cable routing and high environmental resilience. Its mechanical robustness and stable electrical characteristics make it suitable for continuous monitoring of critical rotating machinery. Key Characteristics 11 mm eddy‑current probe for displacement and vibration measurement Extended 30‑meter cable for long‑distance installations Wide operating and storage temperature range: −52°C to +177°C Viton O‑ring sealing for differential pressure containment Gold‑plated brass ClickLoc connectors for secure electrical connections TipLoc molded probe tip for enhanced mechanical strength CableLoc reinforcement providing 330 N pull strength Optional FluidLoc cable to prevent oil migration Suitable for harsh industrial and hazardous environments Technical Specifications Parameter Specification Model / Part Number 330701‑00‑30‑10‑02‑05 Probe Type 3300 XL 11 mm Proximity Probe Cable Length 30 m Thread Size 1/2‑20 UNF Temperature Range −52°C to +177°C (operation & storage) Sealing Viton O‑ring Connector Type Gold‑plated brass ClickLoc Probe Technologies TipLoc molded tip, CableLoc cable retention Optional Features FluidLoc oil‑resistant cable, connector protectors Weight 0.06 kg Dimensions 1.8 × 1.6 × 123 cm System Compatibility 3300 XL Proximity Transducer System Condition Brand New Origin USA MOQ 1 HS Code 8537101190 Functional Description The 330701‑00‑30‑10‑02‑05 probe is engineered for applications requiring long cable runs, such as large turbine decks, compressor skids, and remote bearing housings. Its 30‑meter cable maintains signal integrity over extended distances, while the ClickLoc connector ensures a secure, vibration‑resistant electrical interface. The probe incorporates several Bently Nevada proprietary technologies: TipLoc: A molded probe‑tip design that permanently bonds the tip to the probe body. CableLoc: A high‑strength cable retention system capable of withstanding 330 N of pull force. FluidLoc (optional): Prevents oil migration through the cable interior, ideal for lubrication‑rich environments. The Viton O‑ring provides sealing against differential pressures between the probe tip and machine casing. Pressure‑tested configurations are available upon request. This model is designed for use in high‑temperature, high‑vibration, and moisture‑prone environments, making it suitable for critical machinery protection systems across power generation, oil & gas, and heavy industrial sectors. Application Scenarios Steam and gas turbines Centrifugal and axial compressors Large industrial pumps Gearboxes and generators Installations requiring long‑distance probe routing FAQ Q: Why choose an 11 mm probe over smaller sizes It provides a wider linear range, ideal for large‑shaft or high‑displacement applications. Q: Is this probe suitable for high‑temperature environments Yes. It operates reliably from −52°C to +177°C. Q: What is the benefit of FluidLoc cable construction It prevents oil migration through the cable, improving long‑term reliability in lubrication‑rich environments.
$200.00 $100.00
-
Bently Nevada Bently Nevada 330101‑00‑09‑10‑02‑05 | 3300 XL Series | 8 mm Proximity Probe
Overview The Bently Nevada 330101‑00‑09‑10‑02‑05 proximity probe is part of the 3300 XL 8 mm eddy‑current transducer system, engineered for precise shaft vibration and position measurement in fluid‑film bearing machinery. Its compact mechanical design and stable electrical characteristics make it suitable for continuous monitoring in demanding industrial environments. Key Characteristics 8 mm eddy‑current probe for displacement and vibration monitoring Designed for use with 3300 XL extension cables and Proximitor sensors Optional connector protectors available for enhanced environmental sealing Lightweight construction for easy installation in confined spaces Fully interchangeable with 3300 XL and legacy 3300 5 mm / 8 mm components Suitable for high‑vibration, high‑temperature industrial applications Technical Specifications Parameter Specification Model / Part Number 330101‑00‑09‑10‑02‑05 Probe Type 3300 XL 8 mm Proximity Probe Thread Size Standard 3300 XL probe threading Cable Length 1.0 m (3.3 ft) Cable Type Unarmored coaxial cable Connector Type Miniature coaxial ClickLoc Measurement Principle Eddy‑current displacement Environmental Protection Optional connector protectors Weight 0.06 kg Dimensions 1.8 × 1.6 × 123 cm System Compatibility 3300 XL Proximity Transducer System Condition Brand New Origin USA MOQ 1 HS Code 8537101190 Functional Description The 330101‑00‑09‑10‑02‑05 probe is engineered to deliver accurate displacement and vibration measurements across a wide operating range. Its compact design supports installation in tight or high‑density machinery layouts. The probe can be supplied with pre‑installed connector protectors to shield electrical connections from moisture, dust, and contaminants—an important feature for harsh industrial environments. Connector protectors may also be ordered separately for field installations, especially when cables must be routed through narrow conduits or complex pathways. These accessories help maintain long‑term signal integrity and reduce maintenance requirements. The probe is fully compatible with 3300 XL extension cables and Proximitor sensors, ensuring stable performance without requiring matched components or bench calibration. Application Scenarios Steam and gas turbines Centrifugal compressors Industrial pumps and fans Gearboxes and generators Machinery requiring compact probe installation FAQ Q: Are connector protectors required for all installations They are recommended for environments with moisture, dust, or contaminants to ensure long‑term signal reliability. Q: Is this probe compatible with older 3300 systems Yes. It is fully interchangeable with both XL and non‑XL 3300 5 mm and 8 mm components. Q: Does the probe require calibration No. Calibration is performed at the Proximitor sensor level, not the probe.
$200.00 $100.00
-
Bently Nevada Bently Nevada 330103‑00‑05‑20‑02‑00 | 3300 XL Series | 8 mm Proximity Probe
Overview The Bently Nevada 330103‑00‑05‑20‑02‑00 proximity probe is part of the 3300 XL 8 mm transducer system, engineered for precise shaft vibration and position measurement in fluid‑film bearing machinery. This model features an M10 × 1 threaded housing, a compact mechanical profile, and a 2‑meter integrated cable, making it suitable for a wide range of industrial monitoring applications. Key Characteristics 8 mm eddy‑current probe for displacement and vibration monitoring M10 × 1 stainless‑steel threaded body, non‑armored configuration Minimum unthreaded length: 0 mm Minimum case length: 50 mm 2.0‑meter coaxial cable with ClickLoc miniature connector Optional FluidLoc cable for oil‑rich environments Locknut with pre‑drilled safety‑wire holes for secure installation Factory‑calibrated for AISI 4140 steel; alternative calibration available Technical Specifications Parameter Specification Model / Part Number 330103‑00‑05‑20‑02‑00 Probe Type 3300 XL 8 mm Proximity Probe Thread Size M10 × 1 Minimum Unthreaded Length 0 mm Minimum Case Length 50 mm Cable Length 2.0 m (6.6 ft) Cable Type Standard coaxial; optional FluidLoc Connector Type Miniature coaxial ClickLoc Measurement Principle Eddy‑current displacement Calibration Factory‑set for AISI 4140 steel Weight 0.08 kg Dimensions 1.8 × 1.5 × 113 cm System Compatibility 3300 XL Proximity Transducer System Condition Brand New Origin USA MOQ 1 HS Code 8537101190 Functional Description The 330103‑00‑05‑20‑02‑00 probe is designed for accurate displacement and vibration measurement in rotating machinery. Its non‑armored configuration is ideal for installations where cable routing is protected or enclosed. The 2‑meter cable provides flexibility for medium‑distance installations, while the ClickLoc connector ensures secure electrical contact. Optional FluidLoc cable construction prevents oil migration through the cable interior, making the probe suitable for lubrication‑rich environments such as turbines and compressors. Connector protectors are recommended for humid or moisture‑prone installations. The probe is factory‑calibrated for AISI 4140 steel, the standard target material for Bently Nevada systems. Calibration for alternative shaft materials is available upon request to ensure measurement accuracy. This model supports both standard vibration monitoring and overspeed protection applications when paired with the appropriate Proximitor sensor. Application Scenarios Steam and gas turbines Centrifugal compressors Industrial pumps and fans Gearboxes and generators Overspeed and tachometer monitoring (with proper configuration) FAQ Q: Can this probe be used in oil‑exposed environments? A: Yes, but the optional FluidLoc cable is recommended for oil‑rich applications. Q: Is the probe compatible with older 3300 systems? A: Yes. It is fully interchangeable with both XL and non‑XL 3300 5 mm and 8 mm components. Q: Can the probe be calibrated for materials other than AISI 4140? A: Yes. Custom calibration is available upon request.
$200.00 $100.00
-
Bently Nevada Bently Nevada 330101‑00‑37‑05‑02‑05 | 3300 XL Series | 8 mm Armored Proximity Probe
Overview The Bently Nevada 330101‑00‑37‑05‑02‑05 is a long‑distance, armored 8 mm proximity probe designed for demanding vibration and position monitoring applications. With a 37‑meter integrated armored cable, this probe is engineered for installations requiring extended routing distances while maintaining signal integrity. It is fully compatible with both 3300 XL and legacy 3300 transducer systems, ensuring seamless integration into existing machinery protection architectures. Key Characteristics 8 mm eddy‑current probe with extended 37 m armored cable Designed for long‑distance signal transmission in harsh industrial environments TipLoc molding technology for enhanced probe‑tip durability CableLoc reinforcement providing 330 N pull strength Compatible with XL and non‑XL 3300 5 mm / 8 mm components Optional FluidLoc cable construction available for oil‑rich environments Suitable for high‑vibration and high‑temperature machinery applications Technical Specifications Parameter Specification Model / Part Number 330101‑00‑37‑05‑02‑05 Probe Type 3300 XL 8 mm Proximity Probe Cable Length 37 m (armored) Cable Protection Armored; optional FluidLoc oil‑resistant design Connector Type Miniature coaxial ClickLoc Mounting Pattern Standard 4‑hole pattern (with mounting base) Probe Technologies TipLoc molded tip, CableLoc reinforced cable Measurement Principle Eddy‑current displacement Interchangeability XL and non‑XL 3300 5 mm / 8 mm systems Weight 0.06 kg Dimensions 1.8 × 1.6 × 123 cm System Compatibility 3300 XL Proximity Transducer System Condition Brand New Origin USA MOQ 1 HS Code 8537101190 Functional Description The 330101‑00‑37‑05‑02‑05 probe is engineered for installations where long cable runs are required, such as large machinery skids, remote bearing housings, or equipment with complex routing paths. Its armored cable construction provides mechanical protection against abrasion, vibration, and physical impact. The probe incorporates two key Bently Nevada technologies: TipLoc – A molded probe‑tip design that ensures a strong, permanent bond between the tip and probe body. CableLoc – A high‑strength cable retention system capable of withstanding 330 N of pull force. These features significantly improve durability and reliability in harsh industrial environments. The probe is fully interchangeable with both XL and non‑XL 3300 components, eliminating the need for matched sets or bench calibration. Optional FluidLoc cable construction prevents oil migration through the cable, making it suitable for lubrication‑rich environments such as turbines and compressors. Application Scenarios Large rotating machinery requiring long cable routing Steam and gas turbines Centrifugal compressors Gearboxes and industrial pumps Machinery protection systems in oil & gas, power generation, and heavy manufacturing FAQ Q: Can this probe be used with older 3300 systems? A: Yes. It is fully compatible with both XL and non‑XL 3300 5 mm and 8 mm components. Q: Is the silicone tape suitable for oil‑exposed environments? A: No. Silicone tape is included for general protection but is not recommended for turbine‑oil environments. FluidLoc cable is preferred in such cases. Q: What makes this probe suitable for long‑distance installations? A: Its 37‑meter armored cable maintains signal integrity and provides mechanical protection over extended routing paths.
$200.00 $100.00
-
Bently Nevada Bently Nevada 330930‑060‑04‑05 | 3300 NSv Series | Extension Cable
Overview The Bently Nevada 330930‑060‑04‑05 extension cable is part of the 3300 NSv (Narrow Side‑View) Proximity Transducer System, engineered for machinery where limited mounting space or small shaft diameters prevent the use of standard 5 mm or 8 mm probes. This 6‑meter armored cable ensures stable, noise‑resistant signal transmission between NSv proximity probes and Proximitor sensors, supporting accurate vibration and position monitoring in demanding industrial environments. Key Characteristics 6.0‑meter extension cable designed specifically for 3300 NSv systems Stainless‑steel armored construction with FEP jacket for chemical and mechanical protection Gold‑plated brass ClickLoc connectors for secure, vibration‑resistant mating CableLoc retention system rated to 220 N pull strength Suitable for compact machinery and small‑target applications Backward‑compatible with earlier 3300 RAM probe systems Supports radial vibration, axial position, and small‑target displacement measurements Technical Specifications Parameter Specification Model / Part Number 330930‑060‑04‑05 Product Type 3300 NSv Extension Cable Cable Length 6.0 m (19.7 ft) Armor Stainless steel Jacket Material FEP Connector Type Gold‑plated ClickLoc Cable Retention CableLoc, 220 N pull strength System Compatibility 3300 NSv Proximity Transducer System Weight 0.55 kg Dimensions 20.5 × 22.4 × 3.3 cm Condition Brand New Origin USA MOQ 1 HS Code 8537101190 Functional Description The 330930‑060‑04‑05 cable is engineered to maintain high‑quality signal transmission in installations requiring precise alignment between probe and Proximitor sensor. Its stainless‑steel armor and FEP jacket provide strong resistance to chemicals, abrasion, and mechanical stress, making it suitable for compressors, refrigeration systems, and process gas machinery. The ClickLoc connector design ensures a secure, slip‑resistant connection that withstands vibration and thermal cycling. The CableLoc retention system reinforces the mechanical bond between the cable and probe assembly, supporting up to 220 N of pull force. This cable is optimized for the 3300 NSv system, which is used when standard 5 mm or 8 mm probes cannot be installed due to space limitations or small shaft diameters. It is also compatible with earlier 3300 RAM probe systems, offering flexibility for system upgrades and mixed installations. Application Scenarios Centrifugal compressors Refrigeration compressors Process gas compressors Machinery with limited mounting space Small‑diameter shaft vibration monitoring Chemical and high‑vibration industrial environments FAQ Q: Can this cable be used with standard 3300 XL 5 mm or 8 mm probes No. It is designed specifically for the 3300 NSv system, which uses different electrical characteristics. Q: Is the cable suitable for corrosive or chemical environments Yes. The FEP jacket and stainless‑steel armor provide strong chemical resistance. Q: Does this cable support older 3300 RAM probes Yes. It is backward‑compatible with earlier RAM probe and cable assemblies.
$200.00 $100.00
-
Bently Nevada Bently Nevada 330854‑40‑24‑00 25 mm Extension Cable
Overview The Bently Nevada 330854‑40‑24‑00 extension cable is part of the 3300 XL proximity transducer family and is designed to provide a stable, interference‑resistant connection between 8 mm proximity probes and Proximitor sensors. Engineered for industrial machinery protection systems, this 25 mm extension cable supports accurate vibration and displacement measurements in harsh operating environments. Key Characteristics 25 mm extension cable for 3300 XL proximity transducer systems Designed for use with 8 mm probes for enhanced mechanical robustness Supports accurate vibration, displacement, and overspeed measurements Fully compatible with non‑XL 3300 5 mm and 8 mm components Factory‑calibrated for AISI 4140 steel; optional calibration available Durable construction suitable for high‑temperature and high‑vibration environments Technical Specifications Parameter Specification Model / Part Number 330854‑40‑24‑00 Product Type 3300 XL 25 mm Extension Cable Cable Length 25 mm configuration (system‑specific) Probe Compatibility 8 mm proximity probes Calibration Standard AISI 4140 steel Optional Calibration Available for alternate target materials System Compatibility 3300 XL and legacy 3300 5 mm / 8 mm systems Weight 0.06 kg Dimensions 1.8 × 1.6 × 123 cm Condition Brand New Origin USA MOQ 1 HS Code 8537101190 Functional Description The 330854‑40‑24‑00 extension cable is engineered to maintain signal integrity between proximity probes and Proximitor sensors in the 3300 XL system. When paired with 8 mm probes, the cable supports improved mechanical durability due to the thicker encapsulation and stronger probe casing associated with the 8 mm design. Factory calibration is performed using AISI 4140 steel, ensuring consistent measurement accuracy across standard industrial applications. Optional calibration for alternative shaft materials allows the system to be tailored for specialized monitoring tasks such as tachometer or overspeed detection. The cable is fully compatible with earlier 3300 series components, enabling seamless integration into existing installations without requiring changes to mounting hardware or spatial layouts. Its rugged construction ensures long‑term reliability in demanding environments such as power generation, petrochemical processing, and heavy industrial machinery. Application Scenarios Steam and gas turbines Centrifugal compressors Industrial pumps and fans Gearboxes and generators Overspeed and tachometer measurement systems Machinery requiring robust 8 mm probe configurations FAQ Q: Is this extension cable compatible with older 3300 systems Yes. It is fully backward‑compatible with non‑XL 3300 5 mm and 8 mm components. Q: What is the benefit of using 8 mm probes with this cable 8 mm probes offer thicker encapsulation and stronger mechanical durability, improving long‑term reliability. Q: Can the cable be calibrated for non‑standard shaft materials Yes. Optional calibration is available for alternative target materials.
$200.00 $100.00
-
Bently Nevada Bently Nevada 330101‑00‑41‑15‑12‑05 | 3300 XL Series | 8 mm Proximity Probe
Overview The Bently Nevada 330101‑00‑41‑15‑12‑05 proximity probe is part of the 3300 XL 8 mm transducer system, engineered for high‑accuracy shaft vibration and position measurement in fluid‑film bearing machinery. Designed to meet API 670 (4th Edition) requirements, this probe delivers stable, linear, and repeatable performance in demanding industrial environments. Key Characteristics 8 mm eddy‑current probe for displacement and vibration monitoring Fully compliant with API 670 mechanical and performance criteria Suitable for static position, dynamic vibration, Keyphasor, and speed measurement Interchangeable with all 3300 XL extension cables and Proximitor sensors Backward‑compatible with legacy 3300 5 mm and 8 mm components FluidLoc cable construction for oil‑resistant performance Miniature ClickLoc connector for secure, vibration‑resistant mating Certified for hazardous‑area use (CSA, ATEX, IECEx) Technical Specifications Parameter Specification Model / Part Number 330101‑00‑41‑15‑12‑05 Probe Type 3300 XL 8 mm Proximity Probe Thread Size 3/8‑24 UNF Case Length 1.5 m Cable Length 1.2 m Cable Type FluidLoc oil‑resistant cable Connector Type Miniature coaxial ClickLoc Measurement Principle Eddy‑current displacement Output Voltage proportional to probe‑target gap Certifications CSA, ATEX, IECEx Weight 0.06 kg Dimensions 1.8 × 1.6 × 123 cm System Compatibility 3300 XL Proximity Transducer System Condition Brand New Origin USA MOQ 1 HS Code 8537101190 Functional Description The 330101‑00‑41‑15‑12‑05 probe is engineered to provide accurate displacement and vibration measurements across a wide operating range. Its sensing element produces a voltage proportional to the distance between the probe tip and the conductive target surface, enabling precise monitoring of shaft behavior in rotating machinery. The probe’s FluidLoc cable prevents oil migration through the cable interior, improving long‑term reliability in lubrication‑rich environments. The ClickLoc connector ensures a secure electrical interface that resists loosening under vibration, while maintaining low contact resistance. As part of the 3300 XL system, the probe is fully interchangeable with extension cables and Proximitor sensors, eliminating the need for matched components or field calibration. Its backward compatibility with earlier 3300 series components simplifies system upgrades and mixed installations. Application Scenarios Steam and gas turbines Centrifugal compressors Industrial pumps and fans Gearboxes and generators Machinery requiring API 670‑compliant monitoring FAQ Q: Is this probe compatible with older 3300 series components Yes. It is fully backward‑compatible with non‑XL 5 mm and 8 mm probes, cables, and sensors. Q: What advantage does FluidLoc cable provide It prevents oil migration through the cable, improving reliability in lubrication‑rich environments. Q: Does this probe require matched calibration with its extension cable No. All 3300 XL components are factory‑calibrated for interchangeability.
$200.00 $100.00
-
Bently Nevada Bently Nevada 330101‑00‑13‑15‑12‑CN 3300 XL Proximity Probe
Overview The Bently Nevada 330101‑00‑13‑15‑12‑CN proximity probe is part of the 3300 XL 8 mm transducer family, engineered for precise non‑contact measurement of shaft vibration and displacement in rotating machinery. Its compact mechanical design and stable electrical characteristics make it suitable for installations where space is limited but high‑accuracy monitoring is required. Design and Construction This probe uses a 3/8‑24 UNF threaded body and includes a 1.5‑meter molded cable equipped with a miniature coaxial ClickLoc connector. The ClickLoc mechanism prevents accidental loosening and maintains shielding integrity, ensuring consistent signal transmission even in electrically noisy environments. The 330101‑00‑13‑15‑12‑CN features a non‑armored configuration with a short case length, allowing installation in tight mounting locations without compromising measurement accuracy. The FluidLoc cable design provides additional protection against moisture ingress and mechanical stress. Technical Specifications Parameter Specification Model 330101‑00‑13‑15‑12‑CN Probe Type 3300 XL 8 mm Proximity Probe Thread Type 3/8‑24 UNF Unthreaded Length 0.0 in Case Length 1.3 in Cable Length 1.5 m Connector Miniature coaxial ClickLoc Cable Type FluidLoc Measurement Type Static position and dynamic vibration System Compatibility 3300 XL Proximity Transducer System Weight 0.06 kg Dimensions 1.8 × 1.6 × 123 cm HS Code 8537101190 Origin USA Minimum Order 1 unit Product Status Active System TSI Performance Characteristics The probe generates a voltage output proportional to the distance between the probe tip and the target surface, enabling accurate gap and vibration measurements. Its compact geometry supports installation in restricted spaces while maintaining the durability and performance expected from the 3300 XL series. The 330101‑00‑13‑15‑12‑CN is suitable for hazardous‑area installations and provides stable long‑term performance in environments with high electromagnetic interference. Application Scenarios Turbine, compressor, and generator vibration monitoring Shaft displacement and axial position measurement Installations requiring compact probe geometry Predictive maintenance and machinery protection systems High‑EMI industrial environments requiring stable signal transmission FAQ Q: What makes this probe suitable for tight installations Its short case length and non‑armored design allow mounting in confined spaces without affecting measurement accuracy. Q: Is this probe compatible with standard 3300 XL extension cables Yes. It integrates seamlessly with the full 3300 XL transducer system. Q: Does the FluidLoc cable improve reliability Yes. It enhances moisture resistance and protects the cable from mechanical stress.
$200.00 $100.00
-
Bently Nevada Bently Nevada 330104‑00‑05‑05‑11‑05 3300 XL Proximity Probe
Overview The Bently Nevada 330104‑00‑05‑05‑11‑05 proximity probe is part of the 3300 XL 8 mm transducer family, engineered for high‑accuracy non‑contact measurement of shaft vibration and displacement in rotating machinery. Its armored construction and enhanced mechanical durability make it suitable for harsh industrial environments where long‑term reliability is essential. Design and Construction This probe features an M10×1 threaded housing and a molded PPS sensing tip. The PPS material provides increased encapsulation thickness around the coil, improving resistance to mechanical impact and environmental stress. The probe includes a 1.0‑meter FluidLoc cable equipped with an 11‑series miniature coaxial ClickLoc connector and a connector protector to maintain shielding integrity. The 330104‑00‑05‑05‑11‑05 is designed for seamless integration with the 3300 XL Proximitor Sensor and extension cables, forming a complete eddy‑current transducer system capable of delivering stable, repeatable measurements. Technical Specifications Parameter Specification Model 330104‑00‑05‑05‑11‑05 Probe Type 3300 XL 8 mm Proximity Probe Thread Type M10×1 Minimum Case Length 50 mm Cable Length 1.0 m (FluidLoc armored cable) Connector 11‑series miniature coaxial ClickLoc Tip Material PPS (Polyphenylene Sulfide) Measurement Type Static position and dynamic vibration System Compatibility 3300 XL Proximity Transducer System Backward Compatibility Non‑XL 5 mm and 8 mm probes (with proper bend radius) Certifications CSA, ATEX, IECEx Weight 0.55 kg Dimensions 20.5 × 22.4 × 3.3 cm HS Code 8537101190 Origin USA Minimum Order 1 unit Product Status Active System TSI Performance Characteristics The probe is part of the 3300 XL platform, which eliminates the need for matched calibration between probes, cables, and Proximitor sensors. This ensures consistent linearity, temperature stability, and measurement accuracy across the entire system. The armored cable design enhances mechanical protection, making the probe suitable for high‑vibration or physically exposed installations. When installed with the proper minimum bend radius, the probe can be interchanged with non‑XL 3300 series components without compromising performance. Application Scenarios Turbine and compressor vibration monitoring Shaft displacement and axial position measurement High‑vibration industrial environments requiring armored probes API‑compliant machinery protection systems Installations requiring backward compatibility with legacy 3300 components FAQ Q: Can this probe replace older 3300 series 5 mm or 8 mm probes Yes. It is backward‑compatible when installed with the correct cable bend radius. Q: What advantages does the PPS tip provide The thicker encapsulation improves durability and protects the sensing coil from mechanical damage. Q: Does the probe require matched calibration with its Proximitor sensor No. The 3300 XL system is designed for full interchangeability without matched component sets.
$200.00 $100.00
-
Bently Nevada Bently Nevada 330904-00-10-05-02-05 3300 NSv Proximity Probes
Overview The Bently Nevada 330904‑00‑10‑05‑02‑05 is a 0.5‑meter extension cable designed for use with the 3300 NSv proximity transducer system. Its compact length, rugged construction, and high‑integrity connectors make it suitable for installations where space is limited and signal reliability is critical. Design and Construction This cable uses gold‑plated brass ClickLoc connectors engineered to maintain secure mechanical engagement even in high‑vibration environments. The miniature coaxial design preserves signal fidelity across the full operating range of NSv probes, supporting accurate displacement and vibration measurements. The 330904‑00‑10‑05‑02‑05 is compatible with both armored and unarmored NSv probe configurations, including M8×1, M10×1, 1/4‑28, and 3/8‑24 threaded probe types. Its CableLoc retention system provides up to 220 N (50 lb) of pull strength, ensuring cable integrity in demanding industrial applications. Technical Specifications Parameter Specification Model 330904‑00‑10‑05‑02‑05 Cable Type 3300 NSv Extension Cable Length 0.5 m Connector Type Gold‑plated ClickLoc miniature coaxial Pull Strength 220 N (50 lb) Probe Compatibility NSv probes (armored/unarmored) Thread Compatibility M8×1, M10×1, 1/4‑28, 3/8‑24 Certifications CSA, ATEX, IECEx Weight 0.14 kg Dimensions 20.5 × 22.5 × 3.5 cm HS Code 8537101190 Origin USA Minimum Order 1 unit Product Status Active System TSI Performance Characteristics The cable maintains excellent electrical shielding and mechanical robustness, ensuring stable signal transmission in chemically aggressive or high‑vibration environments. When paired with NSv probes, it supports improved side‑view measurement characteristics, making it suitable for installations where direct axial access is limited. Bently Nevada recommends using connector protectors in wet or corrosive environments to prevent moisture ingress and maintain long‑term signal integrity. Application Scenarios Process compressors with limited installation space Machinery requiring reverse‑mount or side‑view probe configurations Hazardous‑area monitoring systems requiring certified components High‑vibration environments where cable retention strength is critical Chemical processing equipment exposed to corrosive atmospheres FAQ Q: Is this cable compatible with all NSv probe types Yes. It supports both armored and unarmored NSv probes across multiple thread configurations. Q: What makes the CableLoc design important It provides high pull‑strength retention, preventing accidental disconnection in high‑vibration environments. Q: Can this cable be used in hazardous areas Yes. It carries CSA, ATEX, and IECEx certifications for global hazardous‑area compliance.
$200.00 $100.00
-
Bently Nevada Bently Nevada 330103‑00‑05‑10‑02‑CN 3300 XL Proximity Probe
Overview The Bently Nevada 330103‑00‑05‑10‑02‑CN proximity probe is part of the 3300 XL 8 mm transducer family and is engineered for precise non‑contact measurement of shaft vibration and displacement. This model features a short 0.5‑meter cable configuration and is tailored for installations requiring compact probe assemblies, particularly in applications with limited mounting space. Design and Construction This probe uses an M10×1 threaded body and incorporates a 50 mm case length, making it suitable for confined installation areas. The cable is factory‑molded and terminated with a gold‑plated ClickLoc miniature coaxial connector, providing a secure, vibration‑resistant connection and maintaining shielding integrity. The 330103‑00‑05‑10‑02‑CN is designed to operate as part of the complete 3300 XL transducer system, working with compatible extension cables and Proximitor sensors to deliver accurate static and dynamic measurements. Technical Specifications Parameter Specification Model 330103‑00‑05‑10‑02‑CN Probe Type 3300 XL 8 mm Proximity Probe Thread Type M10×1 Case Length 50 mm Cable Length 0.5 m Connector Gold‑plated miniature coaxial ClickLoc Measurement Type Static position and dynamic vibration Certifications CSA, ATEX, IECEx Compliance API 670 System Compatibility 3300 XL Proximity Transducer System Weight 0.14 kg Dimensions 20.5 × 22.5 × 3.5 cm HS Code 8537101190 Origin USA Minimum Order 1 unit Product Status Active System TSI Performance Characteristics The probe generates a voltage output proportional to the distance between the probe tip and the target surface, enabling accurate gap and vibration measurements. Its compact design supports installations in restricted spaces while maintaining the durability and performance expected from the 3300 XL series. The 330103‑00‑05‑10‑02‑CN meets API 670 requirements and is certified for hazardous‑area use, making it suitable for critical applications in power generation, petrochemical processing, and heavy industrial environments. Application Scenarios Turbine and compressor vibration monitoring Shaft displacement and axial position measurement Keyphasor reference signal acquisition Speed measurement on rotating machinery Installations requiring short‑cable probe configurations FAQ Q: What makes this model suitable for compact installations Its 50 mm case length and 0.5 m cable allow mounting in tight spaces without compromising measurement accuracy. Q: Is this probe compatible with standard 3300 XL extension cables Yes. It is designed to operate with the full 3300 XL transducer system. Q: Does this model meet hazardous‑area requirements It carries CSA, ATEX, and IECEx approvals for use in classified environments.
$200.00 $100.00
-
Bently Nevada Bently Nevada 330104‑00‑22‑10‑02‑CN 3300 XL Proximity Probe
Overview The Bently Nevada 330104‑00‑22‑10‑02‑CN proximity probe is part of the 3300 XL 8 mm transducer series, engineered for precise non‑contact measurement of shaft vibration and displacement in high‑performance rotating machinery. Its armored construction and extended mechanical dimensions make it suitable for installations exposed to harsh operating conditions and elevated mechanical stress. Design and Construction This probe features an M10×1 threaded body with a long armored case section, providing enhanced protection against physical damage and cable fatigue. The minimum case length of 220 mm supports flexible mounting arrangements, particularly in large machinery where extended reach is required. A 1.0‑meter molded cable is terminated with a miniature coaxial ClickLoc connector, ensuring a secure, vibration‑resistant connection. The ClickLoc mechanism prevents accidental loosening and maintains shielding integrity, supporting stable signal transmission to the Proximitor sensor. System Integration The 330104‑00‑22‑10‑02‑CN is designed for seamless operation with the 3300 XL Proximitor Sensor. The sensor’s mechanical packaging supports both DIN‑rail and panel‑mount installations and maintains the same 4‑hole mounting footprint as earlier generations, simplifying system upgrades. The probe’s mounting base provides built‑in electrical isolation, eliminating the need for additional isolator plates and reducing installation complexity. Technical Specifications Parameter Specification Model 330104‑00‑22‑10‑02‑CN Probe Type 3300 XL 8 mm Proximity Probe Thread Type M10×1 Minimum Case Length 220 mm Cable Length 1.0 m Connector Miniature coaxial ClickLoc Measurement Type Static position and dynamic vibration RFI/EMI Immunity CE‑compliant, suitable for non‑metallic housings System Compatibility 3300 XL Proximity Transducer System Weight 0.55 kg Dimensions 20.5 × 22.4 × 3.3 cm HS Code 8537101190 Origin USA Minimum Order 1 unit Product Status Active System TSI Performance Characteristics The probe and its associated Proximitor sensor offer improved RFI/EMI immunity, allowing installation in fiberglass or other non‑metallic housings without requiring shielded conduit or metallic enclosures. This reduces installation cost while maintaining measurement accuracy. Full interchangeability across probes, cables, and sensors simplifies maintenance and eliminates the need for matched calibration. The armored design provides additional protection in high‑vibration or mechanically exposed environments. Application Scenarios Turbine and compressor vibration monitoring Shaft displacement and axial position measurement High‑vibration environments requiring armored probe assemblies Installations requiring CE‑compliant RFI/EMI performance Machinery protection systems using 3300 XL transducer components FAQ Q: Can this probe be installed in non‑metallic housings? A: Yes. Its enhanced RFI/EMI immunity allows installation in fiberglass housings without signal degradation. Q: Does the probe require a specific Proximitor sensor? A: It is designed for use with 3300 XL Proximitor sensors for optimal accuracy and linearity. Q: Is the probe interchangeable with older 3300 series components? A: Yes. The 3300 XL platform supports full interchangeability without matched calibration.
$200.00 $100.00
-
Bently Nevada Bently Nevada 330101‑00‑24‑10‑02‑00 3300 XL Proximity Probe
Overview The Bently Nevada 330101‑00‑24‑10‑02‑00 proximity probe is part of the 3300 XL 8 mm transducer family, designed for precise non‑contact measurement of shaft vibration and position in rotating machinery. Its mechanical robustness and stable electrical characteristics make it suitable for long‑term use in demanding industrial environments. Design and Construction This probe uses a 3/8‑24 UNF threaded body and includes a 1.0‑meter molded cable terminated with a miniature coaxial ClickLoc connector. The connector design prevents accidental loosening and maintains shielding integrity, ensuring consistent signal transmission to the Proximitor sensor. Compared with 5 mm probes, the 330101‑00‑24‑10‑02‑00 features a thicker encapsulation and reinforced case structure, improving durability in high‑vibration or mechanically exposed installations. The probe is available in armored and unarmored configurations, offering flexibility for different mounting and routing requirements. Technical Specifications Parameter Specification Model 330101‑00‑24‑10‑02‑00 Probe Type 3300 XL 8 mm Proximity Probe Thread Type 3/8‑24 UNF Cable Length 1.0 m Connector Miniature coaxial ClickLoc Measurement Type Static position and dynamic vibration System Compatibility 3300 Proximity Transducer System Weight 0.06 kg Dimensions 1.8 × 1.6 × 123 cm HS Code 8537101190 Origin USA Minimum Order 1 unit Product Status Active System TSI Performance Characteristics The probe produces a voltage output proportional to the distance between the probe tip and the target surface, enabling accurate displacement and vibration measurements. It is suitable for fluid‑film bearing machines and supports Keyphasor reference and speed measurement applications. The 330101‑00‑24‑10‑02‑00 is fully interchangeable with other 3300 XL components and backward‑compatible with non‑XL 5 mm and 8 mm probes, eliminating the need for matched calibration and simplifying system maintenance. Application Scenarios Radial vibration and shaft displacement monitoring Axial position measurement on turbines and compressors Keyphasor reference signal acquisition Speed measurement on rotating machinery High‑vibration industrial environments requiring durable probe construction FAQ Q: Is this probe compatible with older 3300 series components? A: Yes. It can be used with non‑XL 5 mm and 8 mm probes and cables without requiring matched calibration. Q: What type of machines typically use this probe? A: Turbines, compressors, pumps, and other rotating equipment with fluid‑film bearings. Q: Does the probe require a specific Proximitor sensor? A: For optimal accuracy, it should be paired with a 3300 XL Proximitor sensor.
$200.00 $100.00
-
Bently Nevada Bently Nevada 330101-00-20-15-12-05 Proximity Probes
Overview The Bently Nevada 330101‑00‑20‑15‑12‑05 proximity probe is part of the 3300 XL 8 mm transducer family, engineered for precise non‑contact measurement of shaft vibration and position in rotating machinery. When paired with its extension cable and Proximitor sensor, it forms a complete measurement chain designed for high‑accuracy monitoring in demanding industrial environments. Design and Operating Principles This probe detects the distance between its tip and a conductive target surface, producing a voltage output proportional to both static shaft position and dynamic vibration amplitude. The 330101‑00‑20‑15‑12‑05 is suitable for fluid‑film bearing machines and supports Keyphasor reference and speed measurement applications. The probe assembly complies with API 670 requirements for linearity, temperature stability, and system configuration. Its mechanical and electrical characteristics ensure consistent performance across a wide operating range. Technical Specifications Parameter Specification Model 330101‑00‑20‑15‑12‑05 Probe Type 3300 XL 8 mm Proximity Probe System Compatibility 3300 XL Proximity Transducer System Measurement Type Static position and dynamic vibration Compliance API 670 Cable Length 2.0 m (probe cable segment) Weight 0.08 kg Dimensions 112 × 1.5 × 1.2 cm HS Code 8537101190 Origin USA Minimum Order 1 unit Product Status Active System TSI Performance Characteristics The probe is engineered for long‑term stability and high immunity to electrical noise. Its design supports extended linear measurement ranges and maintains accuracy across temperature variations. The 330101‑00‑20‑15‑12‑05 is backward‑compatible with earlier non‑XL 3300 series 5 mm and 8 mm components, enabling system upgrades without requiring recalibration or hardware redesign. Application Scenarios Shaft vibration and displacement monitoring Axial position measurement on turbomachinery Keyphasor reference signal acquisition Speed measurement on rotating equipment API 670‑compliant protection and condition monitoring systems FAQ Q: Is this probe compatible with older 3300 series components? A: Yes. It can be used with non‑XL 5 mm and 8 mm probes and cables without requiring matched calibration. Q: What type of machines typically use this probe? A: It is commonly installed on turbines, compressors, pumps, and other fluid‑film bearing machinery. Q: Does the probe require a specific Proximitor sensor? A: For optimal accuracy, it should be paired with a 3300 XL Proximitor sensor.
$200.00 $100.00
You have seen 432 out of 468 products