Emerson DeltaV systems deliver scalable, flexible, and reliable distributed control for industrial processes. These systems optimize production, ensure process safety, and provide efficient operation in complex industrial environments.
Emerson DeltaV
-
EMERSON DeltaV S-Series FM19ATEX0173U Hazardous Area I/O Module
Product Description OverviewThe DeltaV S-Series I/O Card (FM19ATEX0173U) is engineered for operation in hazardous environments. It carries multiple international certifications and is designed for safe and reliable use in Zone 2 / Division 2 areas, providing robust control and monitoring capabilities. Hazardous Area Certifications II 3G Ex ec IIC Gc IECEx FMG 19.0019U FM21UKEX0017U Class I, Division 2, Groups A, B, C, D Class I, Zone 2, AEx/Ex ec IIC Gc FM17CA0145U / FM17US0286U Complies with ISA-S71.04 G3 airborne contamination standard Power Specifications Local Bus Power: 12 VDC, 150 mA Bussed Field Power: 24 VDC, 3.2 A per card Channel Power: 24 VDC, 100 mA per channel Environmental & Mechanical Specifications Operating Temperature: -40°C to +70°C Vibration: 1 mm peak-to-peak (2–13.2 Hz), 0.7 g (13.2–150 Hz) Shock: 10 g, half-sinewave, 11 ms Relative Humidity: 5–95%, non-condensing Airborne Contaminants: Class G3 Installation & Maintenance Do not insert or remove the module while system power is on Field power must be disconnected before installation or removal Rotary keying ensures correct terminal block and I/O card alignment No user-serviceable parts; factory-calibrated and maintenance-free ApplicationsDesigned for chemical, petrochemical, and natural gas facilities. Supports fieldbus and distributed I/O architectures, seamlessly integrating with DeltaV S-Series control systems. FAQ Q: Can the I/O card be replaced while system power is on?A: No. Both field and system power must be disconnected for safe removal or installation. Q: Is periodic calibration required?A: No. The unit is factory-calibrated and does not require user maintenance. Q: Can it operate in high humidity environments?A: Yes. It supports 5–95% relative humidity, non-condensing. Similar Model Comparison FM17US0286U: Similar hazardous certifications, slightly lower current rating FM21UKEX0017U: Enhanced explosion-proof design for higher temperature environments
$200.00 $100.00
-
EMERSON Emerson KJ3241X1-BK1 I/O Termination Block | DeltaV M-Series
Product Description Overview The Emerson KJ3241X1-BK1 is a high-performance I/O termination block for DeltaV™ DCS, connecting field wiring to M-series I/O modules. Designed for redundancy, it ensures continuous operation in demanding industrial environments. Key Features Redundant I/O Support: Dual-path connection for failover without downtime. Hot-Swap Capability: Insert or remove modules safely under power. Signal Protection: Isolated pathways reduce EMI and voltage spikes. Keyed Terminal Blocks: Prevents incorrect module insertion. Durable Design: Withstands -40°C to 70°C, vibration, and shock. Technical Specifications Parameter Specification I/O Slots 8-wide Power 12 VDC, 210 mA Mounting DIN Rail / Carrier Temperature -40°C to +70°C Shock 10 g, 11 ms Vibration 1 mm (2–13.2 Hz), 0.7 g (13.2–150 Hz) Humidity 5–95% Non-condensing Contaminant Resistance ISA-S71.04 Class G3 Hazardous Area ATEX II 3G, FM Class I Div. 2, IECEx Applications Ideal for chemical, power, and refinery environments requiring continuous signal integrity and redundant operation.
$200.00 $100.00
-
EMERSON Emerson DeltaV KL3106X1-LS1 Safety Discrete Input CHARM
Product Description Overview The Emerson DeltaV KL3106X1-LS1 is a single-channel Discrete Input CHARM designed for the DeltaV LS (Logic Solver) series. It provides reliable monitoring of 24V DC dry contact signals from safety-critical field devices while maintaining SIL 3-level safety and intrinsic isolation. Key Features SIL 3 Safety Integration: Compliant with IEC 61508/61511, ensures fast and deterministic reporting of discrete input states. Electronic Marshalling: Flexible I/O mapping, supports late binding to simplify wiring and cabinet design. Fault Detection: Detects open/short circuits, LED status for quick diagnostics. Environmental Robustness: ISA-S71.04 Class G3 coating, operating range -40°C to +70°C. Hot-Swappable: Can be replaced without powering down adjacent modules. Specifications Feature Specification Input Type 24V DC Dry Contact (Low-Side) Channel Count 1 Isolation Galvanic isolation LED Indicators Green = Normal, Red = Fault CHARM Bus Power +6.3 VDC at 0 mA Field Circuit Power +24 VDC at 23 mA Energy-Limited Output 24V DC, max 100 mA Operating Temp -40°C to +70°C Shock 10g, 11 ms Vibration 1 mm (5–16 Hz), 0.5g (16–150 Hz) Environmental ISA-S71.04 Class G3 Dimensions 5.1 × 1.9 × 3.2 cm Weight 0.03 kg Applications Safety switches, level sensors, and emergency stop monitoring in SIL 3 loops. Hazardous area installations in chemical, petrochemical, and oil & gas plants. FAQ Q: Can it be replaced under power?A: Yes, it is hot-swappable within LS-series safety cabinets. Q: Is calibration required?A: No, it is factory-calibrated and maintenance-free.
$200.00 $100.00
-
EMERSON Emerson DeltaV KL3106X1-BA1 I.S. Discrete Input CHARM Module
Product Description Overview The Emerson DeltaV KL3106X1-BA1 is a high-performance, Intrinsically Safe (I.S.) Discrete Input CHARM designed for the DeltaV Electronic Marshalling system. It allows safe, precise interfacing with 24V DC dry contact field devices in hazardous areas while eliminating the need for external I.S. barriers. This module combines signal detection, energy-limiting circuitry, and galvanic isolation in a single compact footprint, streamlining installation in Zone 0/Zone 1/Class I Div 1 environments. Key Features Intrinsically Safe Design Built-in galvanic isolation and energy-limiting electronics provide full compliance with ATEX, IECEx, FM, and CSA standards. Suitable for direct connection to “Simple Apparatus” or I.S. certified devices in explosive atmospheres. Supports hazardous locations including Zone 0, Zone 1, and Class I Div 1. Discrete Input Functionality Accepts 24V DC dry contact signals from pushbuttons, limit switches, or level switches. Detects wiring faults such as open circuits or shorts when used with proper end-of-line resistors. Single-channel design ensures precise monitoring of individual devices. Hardware Specifications Feature Specification I/O Type Intrinsically Safe Discrete Input (DI) Input Signal 24V DC, Dry Contact Number of Channels 1 (Single-channel) Isolation Channel-to-system galvanic isolation Bus Power +6.3 VDC at 0 mA Field Circuit Power +24 VDC at 23 mA Environmental Protection ISA-S71.04 Class G3 Operating Temperature -40°C to +70°C Shock 10g, 11 ms, half-sine wave Vibration 1 mm peak-to-peak (2–13.2 Hz); 0.7g (13.2–150 Hz) Terminal Keying E6 Operational Advantages Eliminates the need for external I.S. barriers, reducing control room and field enclosure footprint by 50–70%. Hot-swappable in compliance with hazardous area guidelines without affecting other modules. Supports DeltaV late binding, enabling any signal type to be landed on any terminal block without rewiring. Applications Field-mounted junction boxes for chemical, petrochemical, and oil & gas plants. Remote monitoring of switches, pushbuttons, and level devices in hazardous zones. Ideal for projects requiring flexible, modular I/O deployment. FAQ Q: Can the module be removed while system power is on?A: No, the KL3106X1-BA1 must only be inserted or removed with power off. Q: Does it require calibration?A: No calibration is necessary; the module is factory-calibrated and ready for operation. Q: Are external I.S. barriers required?A: No, the module’s built-in isolation and energy-limiting circuitry remove the need for separate barriers.
$200.00 $100.00
-
EMERSON Emerson DeltaV KL3105X1-BA1 I.S. Thermocouple Module | CHARM
Product Description Overview The Emerson DeltaV KL3105X1-BA1 is a precision Intrinsically Safe (I.S.) CHARM designed for DeltaV Electronic Marshalling systems. This module supports direct connection to temperature sensors and low-voltage signals in hazardous areas without requiring external I.S. barriers, simplifying installation while ensuring safety and measurement accuracy. Key Features Intrinsically Safe Integration Integrated galvanic isolation meets IECEx ia and ATEX requirements for Zone 0 / Class I, Div 1 environments. Eliminates external barrier cabinets, reducing wiring complexity and panel footprint. Supports installation in Zone 2/Class I Div 2 environments. Precision Measurement Compatible with Thermocouple types B, E, J, K, N, R, S, T. Accepts millivolt inputs from -100 mV to +100 mV. Internal cold junction compensation ensures accurate temperature readings. High-resolution ADC ensures stable and precise data acquisition. Diagnostics and Reliability Detects sensor faults, open circuits, and wiring issues. LED indicators: Green (normal), Blinking Red (field fault), Solid Red (module fault). Hot-swappable under appropriate hazardous area guidelines without interrupting other channels. Hardware Specifications Feature Specification Input Type Thermocouple / Millivolt (-100 mV to +100 mV) I/O Type Intrinsically Safe Analog Input Bus Power +6.3 VDC at 0 mA Field Circuit Power +24 VDC at 23 mA Operating Temperature -40°C to +70°C (-40°F to +158°F) Shock 10g, 11 ms, half-sine wave Vibration 1 mm peak-to-peak (2–13.2 Hz); 0.7g (13.2–150 Hz) Environmental ISA-S71.04 Class G3 Airborne Contaminants Terminal Block Keying Position C5 (prevents incorrect insertion) Applications Field-mounted junction boxes in hazardous zones. Temperature monitoring in chemical, petrochemical, and oil & gas plants. Systems requiring flexible, late-binding I/O configuration. FAQ Q: Can the module be removed while the system is powered?A: No, the module must be inserted or removed only with system power off. Q: Is calibration required for operation?A: No calibration is needed; the module is factory-calibrated. Q: Does the module support external I.S. barriers?A: No external barriers are required; the CHARM provides built-in isolation and energy-limiting circuitry.
$200.00 $100.00
-
EMERSON Emerson DeltaV KL3101X1-LS1 | S-Series 8-Channel Analog Input Module
Overview The Emerson DeltaV KL3101X1-LS1 is an 8-channel analog input card engineered for DeltaV Distributed Control Systems (DCS). It interfaces with field-mounted transmitters, capturing 4-20 mA signals and supporting HART communication for digital diagnostics and secondary variable monitoring. Part of the S-Series “Electronic Marshalling” hardware, this module combines high-density input, precision conversion, and robust industrial resilience. This module is designed for standard process control environments, providing reliable performance and seamless integration in high-density I/O cabinets. Technical Features HART Integration Supports digital pass-through of HART data alongside analog signals Enables device health monitoring and remote calibration via AMS Device Manager Facilitates predictive maintenance without additional wiring High-Density Design 8 analog inputs per card to maximize cabinet space Low power consumption for efficient thermal management Compact form factor simplifies installation and expansion Reliability and Protection Galvanic isolation safeguards controller electronics from field surges Conformal coating per ISA-71.04 Class G3 protects against dust, moisture, and corrosive atmospheres Built for continuous operation in harsh industrial environments Hot-Swappable Operation Allows module replacement without powering down the DeltaV system Ensures uninterrupted process control during maintenance or upgrades Technical Specifications Feature Specification Input Channels 8 Analog Channels Signal Type 4-20 mA DC HART Support Digital Pass-Through A/D Resolution 16-bit Sampling Interval 100 ms per 8 channels Accuracy ≤0.1% of Span Operating Temperature -40°C to 70°C (-40°F to 158°F) Protection Conformal coating G3, galvanic isolation Operational Advantages Simplifies wiring by eliminating external HART multiplexers Enhances proactive diagnostics for early detection of device faults Automatically recognized by DeltaV software, reducing commissioning time Supports flexible system expansion in S-Series hardware setups Applications Standard process control in chemical, pharmaceutical, and oil & gas industries High-density analog signal collection in DeltaV S-Series cabinets Remote monitoring and predictive maintenance using HART-enabled devices FAQ Q: Can the KL3101X1-LS1 be installed or removed while the system is running?A: Yes, it supports hot-swappable operation, allowing replacement without shutting down other system components. Q: Does the module require field calibration?A: No. The module is factory-calibrated and contains no user-serviceable parts. Q: Which DeltaV systems are compatible?A: Compatible with DeltaV S-Series controllers and carriers; verify system version before installation. Q: What environments can it operate in safely?A: Rated for standard industrial environments with temperature extremes from -40°C to 70°C and protection against dust and moisture (G3 conformal coating).
$200.00 $100.00
-
EMERSON Emerson DeltaV KL3102X1-BA1 | HART 4-20mA Analog Input Module
Module Overview The Emerson DeltaV KL3102X1-BA1 is an advanced 8-channel analog input module for DeltaV Distributed Control Systems. Designed for integration with field transmitters, it converts 4-20 mA analog signals into digital data for precise process control. The module supports HART communication, enabling device diagnostics and secondary variable monitoring without extra wiring. This module is ideal for process industries requiring reliable, real-time data acquisition and predictive maintenance through enhanced instrument communication. Technical Specifications Electrical Specifications Input Channels: 8 analog inputs Input Type: 4-20 mA DC, HART-enabled Field Power: +24 VDC at 56 mA Module Power: +6.3 VDC at 0 mA Isolation: Full galvanic isolation per channel Performance Features Bi-directional HART communication for device diagnostics High-resolution A/D conversion for precise measurements Digital filtering to reject 50/60 Hz EMI noise Fast sampling rates suitable for closed-loop process control Environmental Ratings Operating Temperature: -40°C to +70°C Shock Resistance: 10 g, 11 ms half-sine Vibration Tolerance: 1 mm peak-to-peak at 2–13.2 Hz, 0.7 g at 13.2–150 Hz Relative Humidity: 5–95% non-condensing Airborne Contaminants: ISA-S71.04 Class G3 Safety & Compliance ATEX/IECEx Certified for hazardous areas FM, CL I/II/III Division 1 & 2 rated Intrinsically safe operation per II 3G Ex ec [ia Ga] IIC Gc standards Operational Benefits Compact Design: High-density channel layout reduces cabinet footprint Maintenance Friendly: LED indicators display power, errors, and channel activity Environmental Resilience: Conformal coating protects against dust, moisture, and industrial contaminants Hot-Swappable Support: Replace modules without shutting down other system components Applications Process control systems in chemical, oil & gas, and pharmaceutical plants Instrumentation monitoring for pressure, temperature, flow, and level Facilities requiring predictive maintenance through HART-enabled devices FAQ Q: Can the KL3102X1-BA1 be replaced while the system is powered?A: No. The module must be removed or installed only with system power off to ensure safety and prevent damage. Q: Does this module require calibration?A: No user calibration is needed; the module is factory-calibrated and contains no serviceable parts. Q: Is this module compatible with DeltaV S-Series and M-Series?A: Yes. Confirm carrier and system version compatibility before installation. Q: What types of hazardous environments can it operate in?A: The module is certified for zones 1 and 2 (gas) and zones 21 and 22 (dust) under ATEX/IECEx standards.
$200.00 $100.00
-
EMERSON Emerson KL3103X1-BA1 DeltaV S-series 8-Channel Intrinsically Safe I/O Module
Product Description Overview The KL3103X1-BA1 is an intrinsically safe digital input and output CHARM module from Emerson, designed for DeltaV S-series Distributed Control Systems. This 8-channel module converts controller commands into 24V DC output to drive field devices such as solenoid valves, relays, and indicator lights, while providing full protection in hazardous environments. Its compact CHARM design allows seamless integration into modular I/O panels and ensures reliable operation in harsh industrial conditions. Technical Specifications Feature Specification Model KL3103X1-BA1 Module Type Intrinsically Safe Digital Output CHARM Channels 8 discrete outputs Output Voltage 24V DC Output Current 0.5 A per channel (typical) Output Type High-side switching Power Supply CHARM Bus: +6.3 VDC, 32 mA; Field: +24 VDC, ~10 mA Fault Detection Open/short circuit detection with LED and software alerts Safety Certifications ATEX, IECEx, FM, UKEX Hazardous Area Rating Zone 2 / Class I Division 2 / Groups A-D Terminal Block Key 2C Operating Temp. -40°C to +70°C Humidity 5–95% RH, non-condensing Shock & Vibration 10g half-sine, 11 ms; 1 mm peak-to-peak 2–13.2 Hz, 0.7g 13.2–150 Hz Weight 0.18 lbs Form Factor S-series CHARM module Applications Monitoring switches, pushbuttons, and contact closures in hazardous areas Field interface for solenoids and indicator lights in chemical, petrochemical, and oil & gas plants Remote intrinsically safe I/O panels for process control Integration with DeltaV systems for single-channel or multi-channel output configurations FAQ Q: Is this module safe for hazardous Zone 2 locations?A: Yes, it is intrinsically safe and certified for Zone 2 / Class I Division 2 environments. Q: How many devices can it monitor?A: Each module provides 8 discrete outputs; multiple modules can be installed for expanded control. Q: Does it require calibration?A: No calibration is necessary, and the module contains no user-serviceable parts. Q: Can the module be replaced while the system is powered?A: Yes, it is hot-swappable when installed in a keyed S-series carrier.
$200.00 $100.00
-
EMERSON Emerson KL3101X1-BA1 DeltaV S-series 8-Channel Dry Contact Input Module
Product Description Overview The KL3101X1-BA1 from Emerson is an 8-channel discrete input card designed for DeltaV S-series systems. It provides robust monitoring of field devices such as limit switches, pushbuttons, and relay contacts by converting physical contact closures into digital signals for the controller. Engineered for hazardous and standard industrial environments, it delivers reliable performance with minimal maintenance. Core Functions Discrete Signal Detection Monitors the open or closed state of 24V DC field circuits Provides internal sensing voltage for dry contact inputs, eliminating the need for external power Noise Filtering and Debouncing Configurable digital filtering ensures accurate readings without false triggering Maintains signal integrity in electrically noisy environments Rapid Response Optimized for low-latency input detection, essential for safety interlocks and high-speed automation sequences Safety and Compliance Certified for hazardous areas: ATEX, IECEx, FM, CSA, and CL1 DIV2 standards Designed for energy-limited applications to meet safety integrity levels Resistant to shock, vibration, and airborne contaminants per ISA-S71.04 Class G3 S-series Reliability Features Hot-swappable for replacement without system downtime Automatic identification by DeltaV controller upon insertion Continuous self-diagnostics to monitor internal health and functionality Technical Specifications Feature Specification Model KL3101X1-BA1 Input Channels 8 Discrete Inputs Input Type 24V DC, Dry Contact ON Detection Level > 2.5 mA typical OFF Detection Level < 1.0 mA typical Isolation Galvanic isolation between field and controller Power Requirements CHARM Bus: +6.3 VDC @ 0 mA; Field Circuit: +24 VDC @ 60 mA Operating Temperature -40°C to +70°C Shock & Vibration 10 g half-sine, 11 ms; 1 mm p-p 2–13.2 Hz, 0.7 g 13.2–150 Hz Humidity 5–95% Non-condensing Terminal Block Key A1 Mounting DeltaV S-series horizontal I/O carrier Maintenance No user-serviceable parts; calibration not required Applications This module is ideal for monitoring discrete field signals in chemical, oil & gas, power generation, and manufacturing plants. It supports sequence-of-events (SOE) recording when paired with compatible DeltaV controllers. FAQ Q: Can this card be installed while the system is powered?A: No, it must be inserted or removed only when system power is off to ensure safety. Q: Does the card require calibration?A: No calibration is necessary; the module is factory configured and maintenance-free. Q: What type of switches are supported?A: Designed for dry contact switches; internal 24V DC sensing voltage powers the field device. Q: Is it compatible with older M-series hardware?A: No, this module is optimized for S-series carriers only.
$200.00 $100.00
-
EMERSON Emerson KL3022X1-BA1 DeltaV S-series 8-Channel Analog Input Module
Product Description Overview The KL3022X1-BA1 from Emerson’s DeltaV S-series is an 8-channel analog input module designed for reliable, high-precision process control. It converts 4–20 mA signals from field instruments into digital data while supporting HART communication for device diagnostics and configuration. This module is engineered for demanding industrial environments and integrates seamlessly into DeltaV S-series I/O nodes. Key Features Signal Acquisition and Conversion Handles 8 independent 4–20 mA analog input channels Converts analog signals to 16-bit digital values with high accuracy Isolated channel design protects backplane from surges and ground loops HART Integration Supports HART versions 5, 6, and 7 Allows live diagnostics and instrument configuration without interrupting control Compatible with AMS Device Manager and similar asset management software S-series Hardware Advantages Hot-swappable within S-series I/O carriers for minimal downtime Compact form factor optimized for airflow and heat dissipation Terminal block keying ensures safe, compatible installation Operational Reliability Wide operating temperature: -40°C to +70°C Shock: 10 g, half-sine, 11 ms; vibration: 1 mm p-p at 2–13.2 Hz, 0.7 g at 13.2–150 Hz Relative humidity: 5–95%, non-condensing Resistant to airborne contaminants per ISA-S71.04 Class G3 Technical Specifications Specification Detail Model KL3022X1-BA1 Channels 8 Analog Inputs Signal Type 4–20 mA DC Input Impedance Typically 250 Ω Protocol Support HART v5, v6, v7 Resolution 16-bit ADC Power Requirements CHARM bus: +6.3 VDC @ 32 mA; Field circuits: +24 VDC @ 30 mA Operating Temperature -40°C to 70°C Shock & Vibration 10 g half-sine, 11 ms; 1 mm p-p 2–13.2 Hz, 0.7 g 13.2–150 Hz Mounting DeltaV S-series I/O carrier Maintenance No user serviceable parts; calibration not required Applications Ideal for process automation in chemical, oil & gas, power generation, and manufacturing plants where precise analog signal monitoring and HART device integration are critical. FAQ Q: Can this module be installed while the system is powered?A: Only in non-hazardous areas. Always perform an I/O loop energy assessment before installation or removal. Q: Does this module require calibration?A: No calibration is required. The module is factory calibrated and maintenance-free. Q: Can I use other CHARM types on the same terminal block?A: Yes, but terminal block keys must be reset to unlock compatibility. Q: Is this module compatible with older M-series I/O?A: No, it is designed specifically for S-series I/O carriers and hot-swap environments.
$200.00 $100.00
-
EMERSON Emerson DeltaV KL3021X1-BA1 Analog Input HART Module S-Series
Product Description Overview The Emerson DeltaV KL3021X1-BA1 is an advanced analog input module designed for high-performance process control. Part of the S-Series (Series 2) I/O family, this 8-channel 4-20 mA card integrates HART communication to provide both analog measurements and access to digital diagnostics from smart field instruments. Its compact design allows seamless installation on S-Series horizontal carriers while delivering reliable, precise process data. Key Features HART Communication Integration Provides access to device diagnostics, secondary variables, and configuration parameters from HART-enabled transmitters Supports multi-variable readings from a single field device, enhancing system visibility Precision and Stability High-resolution ADC ensures accurate, stable measurements for critical control loops Fast update rates reduce lag and maintain timely process feedback Safety and Reliability Individual channel isolation prevents ground loops and protects against electrical surges Supports redundant installations with terminal blocks and carriers for high-availability applications Certified for hazardous locations: Zone 2 / Class I, Division 2 environments Maintenance and Flexibility Hot-swappable design allows replacement without system shutdown Automatic system recognition simplifies commissioning and module swaps Self-diagnostic monitoring reduces field troubleshooting and maintenance efforts Technical Specifications Specification Details Channels 8 Analog Inputs Signal Type 4-20 mA DC with HART protocol HART Version v5, v6, v7 compatible Isolation Channel-to-system galvanic isolation Nominal Signal Range 3.8 mA to 20.5 mA Operating Temperature -40°C to +70°C (-40°F to 158°F) Shock Resistance 10g, 11ms half-sine Vibration 1mm peak-to-peak 2–13.2Hz; 0.7g 13.2–150Hz Contaminant Rating ISA-S71.04 Class G3 Humidity 5–95%, non-condensing Power Requirements CHARM bus +6.3 VDC @ 32 mA; Field circuit +24 VDC @ 25 mA Approvals ATEX, IECEx, FM, CSA Applications Ideal for integrating HART-enabled pressure, temperature, and flow transmitters into DeltaV control systems. Supports both continuous process monitoring and predictive maintenance strategies in hazardous and industrial environments. FAQ Q: Can the KL3021X1-BA1 be installed while the system is powered?A: Only in non-hazardous areas. Hot-swapping in hazardous zones requires following DeltaV safety procedures. Q: Does it require calibration after installation?A: No, the module is factory-calibrated and does not require field calibration. Q: Can it detect wiring faults?A: Yes, it provides open- and short-circuit detection for all connected field devices. Q: Is it compatible with redundant setups?A: Yes, when paired with a redundant terminal block and carrier, it supports full process redundancy.
$200.00 $100.00
-
EMERSON Emerson DeltaV KJ4010X1-BG1 S-Series MX Controller High-Capacity CPU
Product Description Overview The Emerson DeltaV KJ4010X1-BG1 is an advanced S-series MX Controller designed for the DeltaV System 8000 platform. As a high-capacity processing unit, it delivers superior memory and computational performance compared to the MQ series, making it suitable for complex and large-scale process control operations. This controller manages I/O communication, executes real-time control strategies, and integrates seamlessly into S-series horizontal carriers with plug-and-play simplicity. Key Features Enhanced Processing and Capacity Increased memory and processing resources for handling complex control strategies Supports up to 1,500 I/O points depending on software license, accommodating large industrial systems High-Speed Execution Rapid processing of PID loops, advanced math, and logic functions Optimized for low-latency communication across the DeltaV Control Network for real-time updates Availability and Redundancy Native 1:1 redundancy allows seamless failover without disrupting control Supports online software upgrades and hot-swapping of the hardware Modern Design and Safety Electronic keying prevents incorrect module installation Passive cooling ensures reliable operation without moving parts that could fail Diagnostics and Cybersecurity Continuous self-checks of CPU, memory, and communication integrity Embedded firewall protects control logic from network threats Environmental Resilience Hazardous area certified: II 3 G, Nemko No. 02ATEX431U, EEx nA IIC T4 Shock: 10 g, ½ sine wave for 11 ms; Vibration: 1 mm p-p (5–16 Hz), 0.5 g (16–150 Hz) Airborne contaminants: ISA-S71.04-1985 Class G3; Humidity: 5–95% non-condensing IP20 rated enclosure Technical Specifications Feature Specification Model Type S-Series MX Controller Series S-Series (System 8000) Input Power 24 VDC ±10% Typical Power Draw 0.25 A at 24 VDC LocalBus Power 12.6 VDC at 8 A I/O Capacity Up to 1,500 points Operating Temperature -40°C to 70°C (-40°F to 158°F) Relative Humidity 5–95%, non-condensing Shock Resistance 10 g, ½ sine wave, 11 ms Vibration Resistance 1 mm p-p (5–16 Hz), 0.5 g (16–150 Hz) Certifications II 3 G, Nemko No. 02ATEX431U, EEx nA IIC T4 Mounting DeltaV S-series Horizontal Carrier IP Rating IP20 Applications Plant-wide process control for large reactors, distillation columns, and multi-unit operations High-complexity automation systems requiring high I/O capacity and redundant processing Hazardous environments requiring certified safety and reliability FAQ Q: How does the MX controller differ from the MQ series?A: The MX (KJ4010X1-BG1) has double the memory and I/O capacity, supporting up to 1,500 points, while MQ supports fewer points. Q: Can the module be hot-swapped?A: Yes, the controller supports hot-swapping and online software upgrades without stopping the process. Q: What environmental certifications does this unit have?A: Certified for hazardous areas: II 3 G, Nemko No. 02ATEX431U, EEx nA IIC T4, with shock, vibration, and contaminant resistance. Q: Are there any installation warnings?A: Always de-energize the system before removing or installing the module or LocalBus Extenders. Maximum cable length is 6.5 meters.
$200.00 $100.00
-
EMERSON Emerson DeltaV KJ4010X1-BF1 S-Series MQ Controller System 8000
Product Description Overview The Emerson DeltaV KJ4010X1-BF1 is a high-performance S-Series MQ Controller for the DeltaV System 8000 (S-series). It serves as the central processing unit for distributed control, handling real-time process control, data acquisition, and communication with I/O modules. Built for reliability in hazardous and demanding industrial environments, it ensures uninterrupted operation and seamless integration with DeltaV S-series systems. Key Features Real-Time Control Executes analog, digital, and advanced process control (APC) strategies with precision Scalable to support a large number of I/O points and software control modules Redundancy and Availability 1-for-1 redundancy allows automatic failover in less than a scan cycle Hot-swappable design enables maintenance or replacement without system downtime Integrated Communication Dual Ethernet ports for DeltaV Control Network connectivity Supports HART, Foundation Fieldbus, and conventional analog/digital I/O Diagnostics and Security Continuous self-monitoring for hardware, memory, and network integrity Integrated cybersecurity measures protect process control logic from unauthorized access Environmental Resistance Conformal coating and G3-rated components withstand harsh environments, including corrosive gases, vibration, and moisture Technical Specifications Feature Specification Model Type S-Series MQ Controller Input Power 24 VDC, 0.25 A (typical) LocalBus Extension Power 12 VDC at 8 A I/O Capacity Up to 750 signals (software dependent) Protocol Support DeltaV Control Network, HART, Profibus Operating Temperature -40°C to 70°C (-40°F to 158°F) Shock Resistance 10 g, 11 ms half-sine wave Vibration Resistance 1 mm p-p (5–16 Hz), 0.5 g (16–150 Hz) Airborne Contaminants ISA-S71.04-1985 Class G3 Relative Humidity 5–95%, non-condensing Mounting DeltaV S-series Horizontal Carrier Certifications I3G, Nemko No. 02ATEX431U, EEx nA IIC T4 Dimensions 10.4 × 3.0 × 10.9 cm Weight 0.14 kg Applications Real-time process control for DeltaV System 8000 Medium to large-scale process automation projects Hazardous or vibration-prone industrial environments requiring redundant, reliable controllers FAQ Q: Can the controller operate in a redundant configuration?A: Yes, it supports 1-for-1 redundancy for continuous process control. Q: Is hot-swapping possible without downtime?A: Yes, the KJ4010X1-BF1 is designed for hot-swappable operation. Q: What protocols are supported?A: DeltaV Control Network, HART, Foundation Fieldbus, Profibus, and standard analog/digital I/O. Q: Are there environmental certifications for hazardous areas?A: Yes, the module is certified for Class I, Division 2, and ATEX/IECEx Zone 2 (EEx nA IIC T4).
$200.00 $100.00
-
EMERSON Emerson DeltaV KJ3006X1-BA1 System Power Supply Module M-Series
Product Description Overview The Emerson DeltaV KJ3006X1-BA1 is a high-performance system power supply designed for the DeltaV M-Series Distributed Control System. This module delivers stable and regulated voltages to the local bus, powering I/O interface carriers and attached modules while ensuring reliable communication across the backplane. Its design emphasizes redundancy, robust diagnostics, and durability for industrial environments. Key Features Redundancy and Reliability Supports dual redundant configurations for uninterrupted operation Hot-swappable capability allows maintenance or replacement without system downtime Power Management Provides regulated 12V DC and 5V DC outputs to the local bus Includes overload protection to prevent damage from short circuits or excessive current Monitoring and Diagnostics Front-panel LED indicators for Power and Error DeltaV software integration offers real-time system alerts Environmental and Mechanical Design Industrial-grade construction tolerates high temperature, vibration, and contaminants Compact footprint fits 2-wide or 4-wide DeltaV carriers efficiently Technical Specifications Feature Specification Input Voltage 24 VDC ±10% Output Voltage Local Bus: 12 VDC / 5 VDC Max Output Current 8 A (approx., depending on load) Module Type M-Series System Power Supply Operating Temperature -40°C to 70°C Relative Humidity 5% to 95%, non-condensing Environmental Resistance Shock: 10 g, 11 ms half-sine; Vibration: 1 mm p-p (5–16 Hz), 0.5 g (16–150 Hz); Airborne Contaminants: ISA-S71.04 G3 Certifications Class I, Division 2, Groups A–D; T4 at Ta = 70°C; ATEX/IECEx Zone 2 Mounting Occupies one slot on DeltaV Carrier Dimensions 10.4 × 3.0 × 10.9 cm Weight 0.14 kg Applications DeltaV M-Series DCS local bus power supply Critical process automation requiring high availability Hazardous or vibration-prone environments with strict electrical safety standards FAQ Q: Can this module be used in a redundant setup?A: Yes, it supports dual redundant operation for seamless system reliability. Q: What happens if the module fails during operation?A: In redundant setups, the secondary module takes over instantly, maintaining system operation. Q: Is it safe to replace the module while the system is running?A: Yes, the KJ3006X1-BA1 is hot-swappable. Q: Does it support HART communication?A: Yes, it provides 24V DC field circuit power compatible with HART devices.
$200.00 $100.00
-
EMERSON Emerson KJ3101X1-BB1 12P2091X122 8-Channel Analog Input Card
Product Description OverviewThe KJ3101X1-BB1 (part number 12P2091X122) is a Series 2 Redundant 8-Channel Analog Input (AI) module for the Emerson DeltaV™ Distributed Control System. It converts 4–20 mA analog signals from field transmitters into high-resolution digital data for process monitoring. This version supports HART protocol pass-through, allowing advanced diagnostic and secondary variable access from smart instruments. Key Features Advanced HART Integration Each channel includes an integrated HART modem, enabling communication with smart field devices without external multiplexing. Seamless connection with AMS Device Manager allows remote configuration, calibration, and asset management. High-Availability Redundant Design Redundant pairing ensures continuous operation. If the active card fails internal self-tests, the standby card automatically assumes control without signal interruption. Redundant backplane paths provide two independent communication routes to the controller, enhancing reliability for critical process measurements. Precision and Signal Protection High-resolution 16-bit analog-to-digital converters deliver precise readings, even for subtle changes in temperature, pressure, or flow. Electrical isolation protects the system backplane from field-side surges or noise. Configurable software filtering smooths out transient or noisy signals for consistent process monitoring. Rugged, Serviceable Construction Hot-swappable design allows replacement under power, minimizing downtime. Front-panel LED indicators provide real-time status feedback for run state, errors, and redundancy condition. Technical Specifications Feature Specification Model KJ3101X1-BB1 / 12P2091X122 Channel Count 8 Analog Input Channels Signal Type 4–20 mA DC Protocol Support Analog (4–20 mA) + HART Digital Resolution 16-bit Input Power Supplied via DeltaV backplane Operating Temperature -40°C to +70°C Environmental Rating ISA-S71.04 Class G3 (Conformal Coating) Redundancy Supports redundant pair operation Hot-Swappable Yes LED Indicators Run, Error, Active/Redundancy Operational Overview The KJ3101X1-BB1 is ideal for high-reliability analog monitoring in DeltaV systems. Its redundancy and HART pass-through capabilities support predictive maintenance, allowing operators to detect sensor issues before they trigger process trips. Maintenance Tips Ensure cards are installed on a Redundant 8-Channel Terminal Block to leverage full redundancy. Use DeltaV Diagnostics Explorer to verify the source of an "Error" LED indication, distinguishing between internal card faults or field wiring issues. ApplicationsSuitable for monitoring temperature, pressure, flow, and other analog variables in process industries requiring high availability and diagnostic visibility. FAQQ: Can this module communicate with multiple HART devices on the same loop?A: Yes, each channel independently supports HART pass-through for smart instrument diagnostics. Q: Is the KJ3101X1-BB1 compatible with standard DeltaV controllers?A: Yes, it integrates seamlessly into DeltaV Series 2 systems and supports redundant operation. Similar Models ComparisonCompared to non-redundant KJ3101X1 modules, the BB1 version provides full redundancy, HART diagnostics, and hot-swappable capabilities for critical process applications.
$200.00 $100.00
-
EMERSON Emerson KL4101X1-BA1 DeltaV S-Series CHARM Smart Logic Solver
Product Description OverviewThe KL4101X1-BA1 is a dedicated CHARM Smart Logic Solver (CSLS) for the Emerson DeltaV™ Safety Instrumented System (SIS). It provides high-integrity safety logic execution for critical applications such as Emergency Shutdown (ESD) and Fire & Gas (F&G) systems. Designed for SIL 3 safety loops, this module ensures distributed safety control while maintaining independence from the basic process control system. Key Features Safety-Certified Logic Processing TUV certified for SIL 3 applications (IEC 61508), delivering high reliability for personnel and process protection. Executes safety-critical logic locally, preventing a process controller or network fault from affecting safety functions. Distributed Safety Architecture Performs logic directly at the I/O level, minimizing communication delays and the need for centralized safety controllers. Supports redundant deployment for parallel operation, self-diagnostics, and cross-checking to ensure fail-safe performance. Integrated Electronic Marshalling for Safety Compatible with the KL2101X1-BA1 carrier and supports a variety of Safety CHARMs, including LS AI, LS DI, and LS DO. Detects and isolates field faults such as wiring failures or shorts, responding within the defined safety time. Advanced Diagnostics & Testing Built-in proof testing capabilities simplify periodic safety loop verification without extensive manual bypasses. High-resolution Sequence of Events (SOE) recording (1 ms) provides accurate safety event logs for analysis and compliance. Hazardous Area Compliance Certified for ATEX/IECEx Zone 2, Class I Div. 2, and additional FM, UKEX certifications for global deployment in hazardous environments. Technical Specifications Feature Specification Model KL4101X1-BA1 Function CHARM Smart Logic Solver (CSLS) Safety Rating SIL 3 (IEC 61508) Max Supported CHARMs 96 Safety CHARMs Communication Redundant Safety I/O Network Input Power 24 VDC at 12 A Output Power 6.3 VDC at 3.25 A Operating Temperature -40°C to +70°C Shock 10g half-sine, 11 ms Vibration 1 mm p-p (2–13.2 Hz), 0.7g (13.2–150 Hz) Environmental Rating ISA-S71.04 Class G3 Humidity 5–95% Non-condensing Coating Conformal-coated for harsh environments Hazardous Area II 3G Ex ec IIC Gc, CL. I Div. 2 GP A–D, Zone 2 AEx/Ex ec IIC Gc Operational Overview The KL4101X1-BA1 enables safe coexistence of safety and process control within a single DeltaV architecture while maintaining functional isolation. Safety logic is configured using DeltaV engineering tools but remains locked and protected, ensuring compliance with international safety standards. Maintenance Notes Replacement modules must be commissioned and safety logic locked with appropriate security privileges and Safety Keys. The unit contains no user-serviceable parts; disassembly is prohibited. Proof testing and diagnostics are supported directly via the DeltaV platform. ApplicationsIdeal for safety-critical environments requiring high integrity logic execution, including oil & gas facilities, chemical plants, and power generation units. FAQQ: Can the KL4101X1-BA1 operate alongside standard DeltaV controllers?A: Yes, it operates independently but integrates within the same DeltaV system for coordinated monitoring. Q: How does it handle field device failures?A: The CSLS detects wiring faults or shorts and responds within safety-defined time limits, ensuring fail-safe operation. Similar Models ComparisonCompared to the KL4201X1-BA1 standard I/O processor, the KL4101X1 is specifically safety-rated, capable of executing SIL 3 logic and interfacing with Safety CHARMs.
$200.00 $100.00
-
EMERSON Emerson KL2101X1-BA1 DeltaV S-Series CHARM I/O Card Carrier
Product Description OverviewThe KL2101X1-BA1 is a rugged 12-slot CHARM I/O card carrier for the Emerson DeltaV™ S-series Distributed Control System. It provides a high-density, modular platform for field wiring directly to CHARM modules, supporting a broad range of signal types including analog, discrete, and RTD. This carrier eliminates traditional marshalling cabinets, simplifying wiring while enhancing system flexibility and reliability. Key FeaturesModular Architecture Supports up to 12 CHARM modules per carrier with isolated electrical slots to maintain channel integrity. Multiple carriers can be mounted on DIN rails to scale I/O capacity without system disruption. Electronic Marshalling Simplified Field devices connect directly to the carrier’s terminals, reducing wiring complexity and installation costs. Hot-swappable CHARM slots allow modules to be added or removed without shutting down the system. Industrial Reliability Conformal-coated design meets ISA-S71.04 Class G3 standards for resistance to corrosive environments. Operational temperature range from -40°C to +70°C suitable for remote instrument enclosures. Built-in grounding bars ensure signal integrity for sensitive analog measurements. Power and Communication Distributes redundant 24 VDC power to individual CHARM modules. Supports field-powered devices such as 4–20 mA transmitters with stable power delivery. Direct connection to CHARM I/O Processor (CIOP) for communication and diagnostics. Hazardous Area Compliance ATEX/IECEx Zone 2, Class I Div. 2, and additional certifications including FM, UKEX, and CL.1. Technical Specifications Feature Specification Model KL2101X1-BA1 Capacity 12 CHARM Slots Series DeltaV S-series Mounting DIN Rail (Horizontal or Vertical) Operating Temperature -40°C to +70°C Shock 10g half-sine, 11 ms Vibration 1mm p-p 2–13.2Hz, 0.7g 13.2–150Hz Environmental Rating ISA-S71.04 Class G3 Humidity 5–95% non-condensing Input Power 24 VDC, 2 A Output Power 6.3 VDC, 3.25 A Hazardous Area ATEX/IECEx Zone 2, Class I Div. 2 ApplicationsIdeal for compact instrument enclosures, remote I/O deployments, and systems requiring high-density, flexible I/O in harsh industrial environments. Maintenance NotesEnsure DIN rail is properly grounded during installation to maintain accurate CHARM diagnostics. The carrier supports live insertion and removal of modules without disrupting adjacent channels. FAQQ: Can I mix analog and discrete CHARM modules on the same carrier?A: Yes, each slot is electrically isolated, allowing mixed signal types without interference. Q: Is the carrier suitable for outdoor installations?A: Yes, the KL2101X1-BA1 operates reliably from -40°C to +70°C and is conformal-coated for G3 environmental conditions. Similar Models ComparisonThe KL2101X1-BA1 differs from the KL2101X2-BA1 8-slot carrier by offering higher module density and expanded field wiring flexibility.
$200.00 $100.00
-
EMERSON Emerson KJ4006X1-BG1 | DeltaV S-Series 16-Channel Analog Input Block
Product Description Overview The KJ4006X1-BG1 is a 16-channel analog input terminal block engineered for the DeltaV™ S-Series Distributed Control System. It provides a robust interface between field-level analog sensors and S-Series I/O modules, supporting both electronic marshalling and standard I/O configurations. Built to meet stringent environmental and hazardous area standards, this terminal block ensures secure and reliable signal acquisition in modern industrial facilities. Key Features High-Density Analog Connectivity Supports 16 analog input channels in a single footprint for efficient cabinet space utilization Compatible with 2-wire, 3-wire, and 4-wire transmitters Ideal for 4–20 mA signals from pressure, flow, and temperature sensors Hazardous Area Certification ATEX, IECEx, and FM approved for Zone 2/Class I, Div 2 applications Designed to minimize risk of sparks or shorts in environments with flammable gases or vapors Rugged Environmental Design Withstands ISA-S71.04 Class G3 airborne contaminants for corrosion resistance Operational temperature range of -40°C to +70°C Shock rated at 10g half-sine wave, vibration compliant with 1mm peak-to-peak (2–13.2 Hz) and 0.7g (13.2–150 Hz) Safety and Integrity Rotary keying ensures correct pairing with compatible I/O cards Field power rated at 30 VDC and 100 mA per channel for reliable sensor operation Shielded wiring connections minimize electromagnetic interference (EMI) for accurate analog readings Technical Specifications Feature Specification Model Number KJ4006X1-BG1 Series DeltaV S-Series Analog Channels 16 Field Power 30 VDC @ 100 mA per channel Operating Temperature -40°C to +70°C Relative Humidity 5–95% Non-Condensing Hazardous Area Certification ATEX II 3G Ex ec IIC Gc, IECEx FMG 19.0019U, FM, Zone 2/Div 2 Shock Rating 10g, 11 ms half-sine Vibration Rating 1mm peak-to-peak (2–13.2 Hz), 0.7g (13.2–150 Hz) Airborne Contaminant Protection ISA-S71.04 Class G3 Mounting DeltaV S-Series I/O Carrier Applications The KJ4006X1-BG1 is suited for analog signal acquisition in: Chemical and oil & gas plants Marine and offshore facilities Hazardous and harsh industrial environments FAQ Q: Can this terminal block be used with 4-wire transmitters?A: Yes, it supports 2-wire, 3-wire, and 4-wire analog transmitters. Q: What is the field power rating per channel?A: Each channel is rated for 30 VDC at 100 mA. Q: How does rotary keying enhance safety?A: Rotary keying ensures only compatible S-Series I/O cards can be connected, preventing wiring errors and signal damage. Q: Is the block resistant to corrosion?A: Yes, it meets ISA-S71.04 Class G3 standards for airborne contaminant protection.
$200.00 $100.00
-
EMERSON Emerson KJ3243X1-BB1 | 12P3430X022 32-Channel 24 VDC Output Card
Product Description Overview The KJ3243X1-BB1 (12P3430X022) is a high-density, 32-channel discrete output module for the DeltaV™ Series 2 Distributed Control System. Designed to drive 24 VDC field devices such as solenoid valves, relays, and indicators, this module enables efficient space utilization and high system reliability. The redundant design ensures seamless switchover to a standby card in the event of a hardware failure, preventing process interruptions. Key Features High-Density Output Control Provides 32 discrete output channels in a single module, reducing I/O cabinet footprint Manages 24 VDC high-side switching with low internal heat generation Supports large-scale valve manifolds and multiple field devices from one slot Redundancy and High Availability Operates in hot-standby mode when paired with a second card Automatic failover transfers output control to the redundant card within one scan cycle Maintains output state during hardware failures to prevent unintended shutdowns Smart Diagnostics and Safety Monitors for open or short circuits on each channel Readback verification confirms the commanded On/Off state matches the actual output voltage Protects DCS backplane via galvanic isolation between field outputs and controller logic Rugged Industrial Design Hot-swappable for zero downtime maintenance Operates in harsh industrial conditions with an ambient range of -40°C to +70°C Engineered for reliability in continuous process environments Technical Specifications Feature Specification Model Number KJ3243X1-BB1 / 12P3430X022 Number of Channels 32 High-Density Channels Output Type 24 VDC High-Side Switching Maximum Current 100–500 mA per channel (depending on load) Series DeltaV Series 2 Redundancy Support Yes, dual-card configuration Operating Temperature -40°C to +70°C Isolation Galvanic isolation for field-to-logic protection Mounting Series 2 terminal block Diagnostics Open/short circuit detection, readback verification Compliance Meets UL, CE, and international industrial safety standards Applications The KJ3243X1-BB1 is ideal for: Batch process control systems Automated valve manifolds Safety shutdown systems requiring high channel countIts high-density design allows engineers to manage multiple outputs efficiently within limited cabinet space. FAQ Q: Can this module be replaced while the system is powered?A: Yes, it is hot-swappable, but redundancy requires correct seating on a compatible redundant terminal block. Q: How is output state verified?A: The module reads back the actual voltage at each terminal to confirm the On/Off state. Q: What is the maximum current per channel?A: Typically 100–500 mA, depending on total load and simultaneous device activation. Q: Does the card support redundancy?A: Yes, dual-card configuration enables seamless automatic switchover during a failure.
$200.00 $100.00
-
EMERSON Emerson KJ3203X1-BA1 | 12P3162X132 Discrete Input Card
Product Description Overview The KJ3203X1-BA1 (12P3162X132) is a Series 2 discrete input module designed for the DeltaV™ Distributed Control System. It interfaces directly with 120/230 VAC field signals, converting them into high-integrity digital inputs for the controller. This module eliminates the need for interposing relays and reduces overall cabinet complexity while maintaining redundancy and reliability in critical control applications. Key Features High-Voltage Direct Input Supports 120 VAC and 230 VAC nominal field signals Direct connection to motor starters, limit switches, and pushbuttons Eliminates external signal conditioning devices Redundancy and Reliability 1-to-1 card redundancy with instant failover Isolates field-side electrical noise and surges from sensitive backplane circuitry Hot-swappable for uninterrupted operation Advanced Signal Processing Configurable debounce filters to prevent false triggering High-speed scanning captures rapid state changes accurately Local LED diagnostics for each channel and overall card status Industrial Durability Operates in -40°C to 70°C ambient temperatures 1500 V peak isolation between field inputs and logic Rugged design suitable for harsh industrial environments Technical Specifications Feature Specification Model Number KJ3203X1-BA1 / 12P3162X132 Input Type Discrete AC (On/Off) Number of Channels 8 isolated channels Nominal Input Voltage 120/230 VAC Isolation Voltage 1500 V Peak (Field-to-Logic) Input Filtering Programmable debounce, high-speed state capture Redundancy 1-to-1 with terminal block Operating Temperature -40°C to 70°C Mounting Series 2 DeltaV rack Diagnostics Local LED indicators (Run/Error + channel state) Compliance UL, CE, and industrial safety standards Applications The KJ3203X1-BA1 is ideal for monitoring critical discrete signals such as: Motor running and stopped status Valve open/closed feedback Pushbutton and limit switch statusIt is suited for control and safety systems in chemical, oil & gas, and manufacturing facilities. FAQ Q: Can the module be replaced while the system is running?A: Yes, it is hot-swappable without interrupting adjacent cards or process operation. Q: What is the isolation rating for field signals?A: The module provides 1500 V peak isolation between field inputs and logic circuits. Q: Does it support both 120 VAC and 230 VAC inputs?A: Yes, it is designed for global voltage standards with direct field interfacing. Q: How does redundancy work?A: Two cards installed in a redundant terminal block operate in parallel; if the active card fails, the standby card takes over immediately.
$200.00 $100.00
-
EMERSON Emerson KL4201X1-BA1 DeltaV CHARM I/O Processor Series 2
Product Description Overview The KL4201X1-BA1 from Emerson is a Series 2 CHARM I/O Processor for the DeltaV™ Distributed Control System. Serving as the intelligent hub for CHARM columns, this module replaces traditional marshalling cabinets by directly interfacing field devices with the DeltaV controller. It handles signal characterization for analog, digital, and temperature signals with high flexibility and precision. Key Features Electronic Marshalling Intelligence Supports any CHARM type (AI, AO, DI, DO, RTD, Thermocouple) on any terminal, auto-detecting channel configuration Allows last-minute changes without cabinet rewiring; only the specific CHARM module needs replacement High-Density, Scalable Design Manages up to 96 individual CHARMs per redundant processor pair, minimizing physical footprint Modular expansion allows incremental growth of I/O channels as process demands increase Redundant and Reliable Operation Designed for paired deployment to ensure uninterrupted control if the primary processor fails Dual Ethernet ports provide continuous communication via the redundant I/O bus Advanced Diagnostics Continuous monitoring of each CHARM channel for faults such as open circuits or shorts Self-checks and real-time A/D verification maintain process accuracy Technical Specifications Feature Specification Model Number KL4201X1-BA1 Module Type CHARM I/O Processor System Compatibility DeltaV Series 2 / S-series / M-series Channel Capacity Up to 96 CHARMs per processor pair Communication Redundant Ethernet I/O Bus Operating Temperature -40°C to 70°C Hazardous Area Rating Often suitable for Class 1, Div 2 / Zone 2 Hot-Swap Capability Yes, supports redundant pair replacement without downtime Signal Types Supported AI, AO, DI, DO, RTD, Thermocouple Operational Notes The KL4201X1-BA1 allows single-channel integrity, ensuring a fault in one wire or CHARM does not affect other channels. Hot-swappable design permits maintenance while maintaining redundant operation. Applications Ideal for DeltaV installations in chemical, oil & gas, and other process industries where flexibility, high-density I/O, and continuous uptime are critical. Perfect for systems using Electronic Marshalling to simplify cabinet layouts and reduce installation costs. FAQ Q: Can I expand I/O channels without replacing the processor?A: Yes, the KL4201X1-BA1 supports modular addition of CHARMs one channel at a time. Q: What happens if the primary CHARM processor fails?A: The redundant processor takes over instantly, maintaining all control functions and communication. Q: Are firmware updates required for DeltaV integration?A: Yes, ensure firmware matches the DeltaV workstation version for full compatibility.
$200.00 $100.00
-
EMERSON Emerson KC3011X1-BA1 DeltaV Controller Series 2 Redundant Unit
Product Description Overview The KC3011X1-BA1 from Emerson is a Series 2 Redundant Controller designed for the DeltaV™ Distributed Control System. It serves as the central processor for local I/O modules and field devices, executing complex control strategies, logic routines, and communication tasks. The controller is engineered for high-reliability, redundant operation, ensuring continuous process control without interruption. Key Features Seamless Redundancy Standby controller mirrors all active controller data for instant failover 1:1 redundancy maintains synchronized control and process data High-Performance Logic Execution Supports high-speed PID loops, batch sequences, and complex logic Handles large numbers of function blocks with minimal scan delays Integrated Communications Dual Ethernet ports for DeltaV Control Network integration Auto-sensing I/O for plug-and-play module detection Durable Industrial Design Fanless operation reduces mechanical failure risk Non-volatile flash memory preserves configuration and control strategies during power loss Technical Specifications Feature Specification Model KC3011X1-BA1 Series DeltaV Series 2 (M5 Plus) Redundancy Supported, dual controller configuration Mounting 2-wide or 4-wide Power/Controller Carrier Input Power 24 VDC, 160–400 mA depending on bus configuration Local Bus Power 12 VDC at 160 mA Field Circuit 17 VDC at 23 mA Operating Temperature -40 °C to 70 °C Shock Resistance 10 g, 11 ms half-sine wave Vibration 1 mm peak-to-peak (2–13.2 Hz), 0.7 g (13.2–150 Hz) Airborne Contaminants ISA-S71.04 Class G3 Relative Humidity 5–95% non-condensing I/O Capacity Up to 64 local modules (depending on configuration) Operational Guidance Field or bussed power must be disconnected before installing or removing the controller. The device features a rotary keying system to ensure correct I/O module pairing. No calibration is required, and internal maintenance should only be performed by authorized personnel. Applications Ideal for chemical, oil & gas, and process industries requiring high-availability control. Suitable for fast-acting process loops, batch automation, and redundant safety-critical operations. FAQ Q: Can the controller operate without redundancy?A: Yes, it can function as a standalone controller, though redundancy is recommended for critical processes. Q: Is firmware upgrade required for DeltaV software updates?A: Firmware must match the DeltaV workstation version to ensure compatibility during configuration downloads. Q: Does it support expansion I/O modules?A: Yes, it supports up to 64 local I/O modules, with auto-detection for easy setup.
$200.00 $100.00
-
EMERSON Emerson KJ3102X1-BA1 12P2093X132 DeltaV Pulse Input Card
Product Description Overview The KJ3102X1-BA1 (12P2093X132) is a high-performance Redundant High-Speed Pulse Input Card for the Emerson DeltaV™ Series 2 Distributed Control System (DCS). It is engineered to capture high-frequency pulse signals with precision, making it ideal for applications such as turbine speed monitoring, flow measurement, and other pulse-based instrumentation. Its redundant design ensures continuous operation in critical process environments. Key Features High-Speed Pulse Processing: Handles inputs up to 50 kHz, providing accurate frequency and totalization measurement. Redundancy and Failover: When paired with an identical module, it provides seamless failover within milliseconds to maintain uninterrupted process control. Hot-Swappable: Can be safely replaced without shutting down the DeltaV system in non-hazardous environments. Versatile Signal Compatibility: Accepts dry contacts, voltage pulses, and specialized transmitters with programmable filtering to prevent false counts. Channel-Level Diagnostics: Monitors each input channel for open circuits, short circuits, and general health, reporting status to the DeltaV controller. Robust Industrial Design: Supports operation from -40°C to 70°C, with storage up to 85°C, and humidity tolerance from 5% to 95% non-condensing. Technical Specifications Feature Specification Model Number KJ3102X1-BA1 / 12P2093X132 Input Channels 4 Isolated Channels Max Pulse Frequency 50 kHz Input Type Pulse, Frequency, Totalization Input Voltage 24 VDC Input Current 80 mA Output Voltage 24 VDC Output Current 1.2 A Isolation Channel-to-Channel and Channel-to-System Operating Temperature -40°C to 70°C Storage Temperature -40°C to 85°C Humidity 5–95% Non-Condensing Dimensions 12.5 cm × 7.5 cm × 2.5 cm Applications Turbine and Motor Speed Monitoring: Captures high-speed rotational signals with minimal latency. Flow Metering: Provides precise pulse counting for accurate fluid measurement. Redundant Process Control Systems: Maintains data integrity during module or system faults. Installation Notes Refer to the product label for serial number and manufacture date. Follow the DeltaV Zone 2 hazardous area installation guidelines (document 12P2046). Do not remove or insert the card while system power is energized in hazardous zones. Ensure network connections do not exceed 60 VAC or 75 VDC to prevent equipment damage. FAQ Q: Can the KJ3102X1-BA1 be used in hazardous areas?A: Yes, but it must be installed according to Zone 2 guidelines in the DeltaV installation manual. Q: How fast can this module count pulses?A: The module can process pulses up to 50 kHz with high precision. Q: What happens if one card fails in a redundant pair?A: The standby card takes over immediately, ensuring uninterrupted process measurement.
$200.00 $100.00
-
EMERSON Emerson KJ1501X1-BC1 Dual DC/DC Power Controller DeltaV Module
Product Description Overview The KJ1501X1-BC1 is a high-reliability Dual DC/DC Power Controller designed for the Emerson DeltaV™ S-series Distributed Control System (DCS). It regulates and distributes power to I/O and controller modules, supporting both 12 VDC and 24 VDC input systems. Engineered for industrial environments, it delivers stable outputs while maintaining system redundancy to prevent downtime. Key Features Dual Power Input & Redundancy: Handles two independent power feeds for fault-tolerant operation. Failure of one supply does not disrupt system functionality. Energy-Limited Alarm Circuits: Supports Uo = 30 VDC, Io = 135 mA, ensuring safe operation in hazardous areas. Hot-Swappable Design: Can be installed or removed following proper safety protocols without affecting other modules. Environmental Resilience: Designed to endure shock (10 g, ½ sine, 11 ms), vibration, airborne contaminants (ISA-S71.04 Class G3), and wide temperature ranges (0–60°C operational). Precise Power Conversion: Provides regulated outputs: +12 VDC at 13 A (12 V input), +12 VDC at 4.5 A (24 V input), +5 VDC at 2 A, 3.3 VDC at 2 A, with total output power up to 10 W at 60°C. Hazardous Area Compliance: Certified II 3 G, Nemko No. 02ATEX431U, EEx nC IIC T4, with inductance Lo = 3.55 μH. Technical Specifications Feature Specification Input Voltage 12 VDC (11.4–12.6 VDC), 24 VDC (22.8–25.2 VDC) Output Voltage & Current +12 VDC 13 A (12 V input), +12 VDC 4.5 A (24 V input), +5 VDC 2 A, 3.3 VDC 2 A Total Output Power 10 W at 60°C (combined 5 VDC + 3.3 VDC outputs) Alarm Circuit Uo = 30 VDC, Io = 135 mA, Li = 0, Ci = 0 Hazardous Area Rating II 3 G, Nemko No. 02ATEX431U, EEx nC IIC T4 Inductance Lo = 3.55 µH Ambient Temperature 0–60°C Shock 10 g, ½ sine, 11 ms Vibration 1 mm peak-to-peak (5–16 Hz), 0.5 g (16–150 Hz) Humidity 5–95%, non-condensing Airborne Contaminants ISA-S71.04 Class G3 Mounting DeltaV S-series Power/Controller Carrier Applications Process Control Systems: Maintains reliable power for I/O modules in refineries, chemical plants, and utilities. Hazardous Areas: Meets stringent ATEX and IECEx certifications for safe deployment in flammable atmospheres. High Availability Facilities: Supports redundant input configurations for zero-downtime operations. Installation & Maintenance Notes Must remove field power before module insertion or removal. In 12 VDC passthrough mode, ensure input source does not exceed 12.6 VDC or 16 A. Contains no user-serviceable components. Disassembly is prohibited. Calibration is not required. FAQ Q: Can this module operate in hazardous environments?A: Yes, it is certified for ATEX Zone 2 (II 3 G) and Class 1 Div 2 conditions. Q: What happens if one input power source fails?A: The module continues to supply power using the secondary input without interruption. Q: Is it compatible with other DeltaV power modules?A: Yes, it integrates with S-series carriers and supports dual DC/DC input redundancy.
$200.00 $100.00
You have seen 120 out of 320 products