نحن نقدم خدمة التوصيل في اليوم التالي من الاثنين إلى الجمعة إذا كان المنتج موجودًا في المخزون والاستثناءات في أيام العطلات.
عطلات نهاية الأسبوع
نحن لا نقدم أي تسليمات في عطلة نهاية الأسبوع.
دولي
نوفر خدمة التوصيل في اليوم التالي، حسب موقعك. تحقق من حالة طلبك عبر هذا الرابط.
The Bently Nevada 3300/16 Dual Vibration XY/Gap Monitor is a rack-mounted module engineered to provide simultaneous measurement of radial shaft vibration and probe gap voltage. Designed for the 3300 monitoring system, this module continuously evaluates input signals against defined alarm setpoints to ensure the integrity of critical rotating machinery, such as turbines and compressors.Features
Dual-channel monitoring for integrated vibration and gap voltage analysis.
Continuous signal processing with dedicated Alert and Danger alarm setpoints.
Front-panel LED indicators for system status, including OK, Bypass, Alert, and Danger conditions.
Compatible with standard proximity probe systems and Proximitor sensors.
Configurable output signals for integration with external control or data acquisition systems.
Applications
Radial shaft vibration monitoring for large rotating equipment.
Proximity probe gap voltage monitoring for machinery health diagnostics.
Predictive maintenance and protection systems in power generation and petrochemical facilities.
Technical Specifications
Model
3300/16-13-01-00-00-00-00
Brand
Bently Nevada
Series
3300
Operating Temperature
0 to 60 deg C
Power Consumption
1.5 W typical
Signal Accuracy
+/- 0.33% typical, +/- 1% max at 25 deg C
Output Signals
+4 to +20 mA, +1 to +5 VDC, 0 to -10 VDC
Installation Guidelines
Ensure the 3300 rack is powered down before inserting or removing the module to prevent electrical damage.
Verify that the module is fully seated in the rack slot and the front-panel connectors are secured.
Use shielded cabling for all transducer inputs to minimize electromagnetic interference (EMI).
Ensure proper grounding of the 3300 rack system per site safety standards.
Handle the module using standard ESD (Electrostatic Discharge) protection practices.
FAQWhat is the primary function of the 3300/16 monitor?The 3300/16 is designed to monitor radial vibration and probe gap voltage, providing essential data for machinery protection and identifying potential mechanical faults before they lead to failure.Is this module compatible with existing 3300 racks?Yes, this module is designed specifically for the Bently Nevada 3300 rack system. Ensure your rack configuration supports the specific power and signal requirements of this module.
DescriptionThe Bently Nevada 3300/05-27-00-01 is a 12-slot rack chassis designed to serve as the mechanical and electrical foundation for the 3300 Monitoring System. This chassis provides the necessary backplane connectivity and structural support to integrate various monitoring modules, including vibration, thrust, eccentricity, expansion, tachometer, and temperature monitors, ensuring reliable machinery protection in industrial environments.Features
12-slot capacity for high-density monitoring configurations.
Robust mechanical housing ensuring alignment and stability for all installed modules.
Integrated backplane for reliable signal and power distribution across the rack.
Designed for seamless integration with 3300 series power supplies and monitoring modules.
Standardized mounting configuration for simplified installation in industrial cabinets.
Technical Specifications
Model
3300/05-27-00-01
Series
3300
Product Type
12-Slot Rack Chassis
Operating Temperature
0 to 60 degC
Power Compatibility
Supports 3300/12 Power Supply Modules
Capacity
12 Module Slots
Installation Guidelines
Ensure the chassis is mounted in a clean, dry, and vibration-dampened environment.
Verify that the rack is properly grounded to the cabinet ground bus to prevent EMI/RFI interference.
Power down the system before inserting or removing any monitoring modules from the chassis slots.
Ensure adequate airflow around the chassis to maintain operating temperatures within the 0 to 60 degC range.
Use appropriate ESD protection when handling modules to prevent damage to sensitive backplane components.
Check that all module connectors are fully seated and secured before applying power.
FAQWhat is the primary function of the 3300/05 chassis?The chassis provides the mechanical housing, power distribution, and backplane communication required for the 3300 series monitoring system to operate as a cohesive unit.Can this chassis accommodate any 3300 series module?Yes, the 3300/05-27-00-01 is designed to house standard 3300 series monitoring modules, including vibration, thrust, and system monitor modules, provided the total power and slot requirements are met.Is this chassis compatible with 3300/12 power supplies?Yes, this chassis is specifically designed to support 3300/12 power supply modules for system operation.
The Bently Nevada 114M5335-01 is a Low Voltage DC Power Input Module (PIM) designed for the 3500/15 Power Supply system within the Bently Nevada 3500 Series Machinery Protection System. This module serves as the physical interface between an external 20 to 30 Vdc power source and the 3500 rack's power supply module.Features
Low-Voltage DC input range (20 to 30 Vdc).
Designed for integration with the 3500/15 Power Supply system.
Supports power redundancy when configured with dual modules.
Includes internal fuse protection against over-voltage conditions.
High electromagnetic compatibility (EMC) for industrial environments.
ApplicationsThis module is used in critical machinery protection systems, including:
Turbines: Steam, hydraulic, industrial gas, and aeroderivative gas turbines.
Compressors: Centrifugal, axial, reciprocating, and screw compressors.
Pumps: Horizontal and vertical centrifugal pumps, and reciprocating pumps.
Generators and electric motors.
Auxiliary equipment such as fans, blowers, agitators, and turbo-expanders.
Technical Specifications
Model
114M5335-01
Input Voltage
20 to 30 Vdc
Operating Temperature
-30 degC to +65 degC (-22 degF to +150 degF)
Storage Temperature
-40 degC to +85 degC (-40 degF to +185 degF)
Weight
0.3 kg
Installation Guidelines
The 114M5335-01 must be installed in the designated slots on the left side of the 3500 rack, positioned directly behind the associated 114M5330-01 Low Voltage DC Power Supply.
Ensure the system is powered down before inserting or removing the module to prevent electrical damage.
Use the integrated screw terminals for secure connection of the DC power source.
Maintain proper ventilation within the cabinet to ensure the module operates within its specified temperature range.
For redundant configurations, ensure both PIMs are correctly seated to allow for seamless load sharing and hot-swapping capabilities.
FAQWhat is the function of the 114M5335-01?It acts as the power input terminal for the 3500 rack, receiving 20 to 30 Vdc and distributing it to the power supply module.Does the 114M5335-01 support hot-swapping?Yes, when the 3500 rack is configured with redundant power supplies, the system can maintain operation if one module is removed or fails.What is the difference between 114M5330-01 and 114M5335-01?The 114M5330-01 is the Low Voltage DC Power Supply module that converts input power, while the 114M5335-01 is the Power Input Module (PIM) that provides the physical interface and terminal connection for the DC source.
نحن نقدم خدمة التوصيل في اليوم التالي من الاثنين إلى الجمعة إذا كان المنتج موجودًا في المخزون والاستثناءات في أيام العطلات.
عطلات نهاية الأسبوع
نحن لا نقدم أي تسليمات في عطلة نهاية الأسبوع.
دولي
نوفر خدمة التوصيل في اليوم التالي، حسب موقعك. تحقق من حالة طلبك عبر هذا الرابط.
DescriptionThe Bently Nevada 3300/35-02-02-01-00-00 is a 6-channel Temperature Monitor module engineered for integration into the 3300 Series rack-based monitoring system. This module provides continuous, high-reliability monitoring of critical temperature points in industrial rotating machinery, including turbines, compressors, and large motors. By processing inputs from RTDs or thermocouples and comparing them against user-configurable alarm setpoints, the unit facilitates proactive machinery protection and predictive maintenance.Features
Six independent monitoring channels for multi-point temperature data acquisition.
Compatibility with standard RTDs (Pt100, Pt1000) and thermocouples (J, K, T types).
Integrated relay outputs for Alert and Danger alarm conditions.
Proportional analog outputs (4 to 20 mA and 1 to 5 VDC) for external integration.
Front-panel LED indicators providing real-time status for OK, Bypass, Alert, and Danger conditions.
ApplicationsThis module is specifically designed for monitoring thermal conditions in critical assets, including:
Bearing temperature monitoring for large rotating equipment.
Stator winding temperature tracking in generators and motors.
Casing temperature monitoring for compressors and turbines.
Technical Specifications
Model
3300/35-02-02-01-00-00
Series
3300
Operating Temperature
-35 degC to +65 degC
Power Consumption
~2 W
Input Types
RTD (Pt100, Pt1000), Thermocouple (J, K, T)
Analog Outputs
4 to 20 mA, 1 to 5 VDC
Alarm Outputs
Alert and Danger Relays
Installation Guidelines
Ensure the 3300 rack system is powered down before inserting or removing the monitor module.
Handle the module using proper ESD (Electrostatic Discharge) protection practices to prevent damage to internal circuitry.
Verify that the module is fully seated in the rack slot to ensure proper backplane connection.
Use shielded cabling for all transducer inputs to minimize EMI/RFI interference in high-noise industrial environments.
Ensure adequate ventilation around the 3300 rack to maintain operating temperatures within the specified -35 degC to +65 degC range.
FAQWhat types of sensors does this module support?The 3300/35-02-02-01-00-00 supports a variety of common industrial temperature sensors, specifically RTDs (Pt100 and Pt1000) and J, K, or T type thermocouples.Can this module trigger external alarms?Yes, the module is equipped with internal relay outputs that can be configured for Alert and Danger alarm conditions, allowing for direct integration with plant safety or control systems.
نحن نقدم خدمة التوصيل في اليوم التالي من الاثنين إلى الجمعة إذا كان المنتج موجودًا في المخزون والاستثناءات في أيام العطلات.
عطلات نهاية الأسبوع
نحن لا نقدم أي تسليمات في عطلة نهاية الأسبوع.
دولي
نوفر خدمة التوصيل في اليوم التالي، حسب موقعك. تحقق من حالة طلبك عبر هذا الرابط.
The Bently Nevada 1900/65A (167699-02) is a versatile, cost-effective, and configurable equipment monitor designed for the continuous protection and monitoring of balance-of-plant assets. This monitor provides a robust solution for critical and auxiliary equipment, integrating seamlessly into existing control systems.Features
Four transducer inputs supporting 2- and 3-wire accelerometers, velocity sensors, or proximity sensors.
Four temperature inputs supporting Type E, J, K, and T thermocouples, and 2- or 3-wire RTDs.
Six configurable relay outputs for alarm and status management.
Four 4-20 mA recorder outputs for external data logging.
Dedicated buffered outputs for each transducer input for portable diagnostic analysis.
Supports acceleration enveloping algorithms for enhanced vibration analysis.
Optional remote display/keypad capability for stand-alone operation up to 75 meters away.
Modbus communication support via Ethernet and serial (RS232/485) ports.
Applications
Rotating Machinery Protection: Monitors pumps, motors, fans, blowers, and centrifuges.
Process Industry Monitoring: Suitable for oil and gas, power generation, mining, and cement plant auxiliary equipment.
OEM & Skid-Mounted Units: Ideal for integration into packaged or skid-mounted OEM machinery.
Predictive Maintenance: Enables early detection of wear, misalignment, and imbalance.
Technical Specifications
Product Model
1900/65A 167699-02
Spare Model
172323-01
Weight
0.98 kg
3-wire Voltage Mode
10 kOhm
Bias Voltage
-24 V
Vibration Variables
+/- 1% of full scale range
Bias Filter
0.09 Hz 1-pole low-pass
OK Filter
2.4 kHz 1-pole low-pass
Installation Guidelines
Electrostatic Discharge (ESD): Always use a grounded wrist strap when handling the module to prevent damage to internal circuitry.
Power Down: Ensure the system power is disconnected before installing or removing the module from the rack.
Wiring: Use shielded cables for transducer inputs to minimize EMI interference. Ensure proper grounding of cable shields at the monitor end.
Environment: Install in a clean, dry environment within the specified temperature range. Ensure adequate ventilation around the module for cooling.
Configuration: Use the Bently Nevada 1900 Configuration software to set up transducer types, alarm setpoints, and relay logic prior to full operation.
FAQWhat is the 1900/65A?The Bently Nevada 1900/65A General Purpose Equipment Monitor is a configurable, cost-effective, stand-alone system for continuous monitoring and protection of balance-of-plant assets, featuring eight input channels, six relays, and Modbus communication.What equipment can the 1900/65A monitor?It is designed for balance-of-plant equipment, such as cooling tower fans, pumps, blowers, motors, centrifuges, and small hydro turbines.Does the 1900/65A support Modbus?Yes, it supports Modbus communications via Ethernet and an RS232/485 serial port to interface with DCS, PLC, or SCADA systems.
نحن نقدم خدمة التوصيل في اليوم التالي من الاثنين إلى الجمعة إذا كان المنتج موجودًا في المخزون والاستثناءات في أيام العطلات.
عطلات نهاية الأسبوع
نحن لا نقدم أي تسليمات في عطلة نهاية الأسبوع.
دولي
نوفر خدمة التوصيل في اليوم التالي، حسب موقعك. تحقق من حالة طلبك عبر هذا الرابط.
The Bently Nevada 330101-00-43-15-02-CN is a high-performance 3300 XL 8 mm proximity probe designed for non-contact vibration and position monitoring in industrial rotating machinery. As part of the 3300 XL transducer system, this probe utilizes eddy current technology to provide precise measurements of shaft displacement, vibration, and eccentricity.Features
Advanced eddy current proximity transducer system performance.
Complete interchangeability of probes, extension cables, and Proximitor sensors, eliminating the need for individual component matching or bench calibration.
Complies with API 670 standards for mechanical configuration, linear range, accuracy, and temperature stability.
Miniature coaxial ClickLoc connector for secure and reliable signal transmission.
Designed for harsh industrial environments with robust construction.
Applications
Gas and Steam Turbines: Monitoring radial vibration and axial thrust to prevent rotor-stator contact.
Centrifugal and Axial Compressors: Ensuring shaft stability for process gas and air compressors.
Large Industrial Pumps: Monitoring boiler feed pumps and high-pressure fluid systems.
Electric Motors and Generators: Protecting large sleeve-bearing units in power generation.
Gearboxes: Monitoring shaft eccentricity and misalignment in high-speed gear systems.
Technical Specifications
Product Model
330101-00-43-15-02-CN
Probe Type
3300 XL 8 mm Proximity Probe
Thread Size
3/8-24 UNF
Unthreaded Length
0.0 in
Case Length
4.3 in
Cable Length
1.5 meter (4.9 feet)
Connector Type
Miniature coaxial ClickLoc
Agency Approvals
CSA, ATEX, IECEx
Manufacturer
Bently Nevada
Installation Guidelines
Ensure the probe is mounted in a stable, vibration-resistant bracket to maintain accurate gap measurements.
Handle the probe tip with care to avoid physical damage or contamination, which can affect eddy current performance.
Use shielded coaxial cables to minimize electromagnetic interference (EMI) in high-noise industrial environments.
Maintain the minimum permissible cable bend radius during installation to prevent damage to the internal conductors.
Always power down the associated Proximitor sensor before connecting or disconnecting the probe cable.
Verify proper grounding of the transducer system to ensure measurement integrity and safety.
FAQIs this product brand new?Yes, the Bently Nevada 330101-00-43-15-02-CN is a brand new, original, and unused component.What is the main function of this probe?It measures shaft displacement and vibration, which is critical for predictive maintenance and protecting rotating machinery from catastrophic failure.What is the operating principle?The probe utilizes the eddy current (electromagnetic induction) principle to measure the distance between the probe tip and a conductive target surface.
نحن نقدم خدمة التوصيل في اليوم التالي من الاثنين إلى الجمعة إذا كان المنتج موجودًا في المخزون والاستثناءات في أيام العطلات.
عطلات نهاية الأسبوع
نحن لا نقدم أي تسليمات في عطلة نهاية الأسبوع.
دولي
نوفر خدمة التوصيل في اليوم التالي، حسب موقعك. تحقق من حالة طلبك عبر هذا الرابط.
The Bently Nevada 330104-08-12-10-02-00 is a high-performance 3300 XL 8 mm proximity probe designed for eddy current transducer systems. This transducer system provides precise, non-contact measurement of shaft vibration and position in rotating machinery, such as steam turbines, gas turbines, and centrifugal compressors. The 3300 XL series is engineered for high accuracy, temperature stability, and full compatibility with API 670 standards.Features
Advanced eddy current proximity sensing technology.
Complete interchangeability of probes, extension cables, and Proximitor sensors, eliminating the need for individual component matching or bench calibration.
Standard 8 mm probe design with M10 x 1 threads.
Includes armored cable for enhanced mechanical protection in harsh industrial environments.
Equipped with a miniature coaxial ClickLoc connector.
Applications
Vibration Monitoring (Dynamic): Detects radial vibration and shaft unbalance to trigger alarms or automatic machine trips, preventing mechanical failure.
Thrust/Axial Position (Static): Monitors axial shaft movement to detect bearing wear or failure.
Industrial Sectors: Widely used in power generation (turbines), oil and gas (compressors/pumps), petrochemical (fans/agitators), and heavy industry (blowers/paper mills).
Technical Specifications
Product Model
330104-08-12-10-02-00
System Type
3300 XL 8 mm Proximity Transducer
Thread Size
M10 x 1
Unthreaded Length
80 mm
Case Length
120 mm
Cable Length
1.0 meter (3.3 feet)
Connector Type
Miniature coaxial ClickLoc
Cable Protection
Armored
Agency Approval
Not required
Installation Guidelines
Handling: Proximity probes are sensitive electronic components. Handle with care to avoid damage to the probe tip or connector pins.
Mounting: Ensure the probe is mounted in a rigid bracket to prevent mechanical resonance. Maintain the specified gap distance from the target shaft as per the system calibration.
Wiring: Use only compatible Bently Nevada extension cables. Ensure all connections are clean and fully seated (ClickLoc connectors must be locked).
Grounding: Follow standard industrial grounding practices for instrumentation to minimize EMI/RFI interference.
Power: Always disconnect power from the Proximitor sensor before connecting or disconnecting the probe to prevent electrical damage.
FAQWhat is the typical gap voltage for this sensor?When properly installed, the Proximitor sensor output should be approximately -9 VDC to -11 VDC, operating within a linear range of -1 VDC to -17 VDC.Are 3300 XL components interchangeable with older systems?Yes, 3300 XL 8 mm components are both electrically and physically backward compatible with non-XL 3300 5 mm and 8 mm transducer system components.
نحن نقدم خدمة التوصيل في اليوم التالي من الاثنين إلى الجمعة إذا كان المنتج موجودًا في المخزون والاستثناءات في أيام العطلات.
عطلات نهاية الأسبوع
نحن لا نقدم أي تسليمات في عطلة نهاية الأسبوع.
دولي
نوفر خدمة التوصيل في اليوم التالي، حسب موقعك. تحقق من حالة طلبك عبر هذا الرابط.
DescriptionThe Bently Nevada 3500/50 Tachometer Module is a critical component of the 3500 Series Machinery Protection System. It is engineered to measure rotational speed and provide phase reference signals for shafts in turbines, compressors, and other essential rotating equipment. The 3500/50-04-01 configuration provides high-integrity speed monitoring, ensuring reliable overspeed protection and accurate phase reference data for machinery diagnostics and control systems.Features
High-integrity speed monitoring for critical turbomachinery.
Supports single or redundant configurations to meet stringent overspeed protection requirements.
Provides essential phase reference signals for synchronous vibration analysis.
Designed for continuous, reliable online monitoring in compliance with API 670 standards.
Fully compatible with other 3500 Series modules for integrated plant-wide machinery protection.
Configurable via 3500 Rack Configuration Software for customized alarm thresholds.
Includes buffered transducer outputs for external diagnostic equipment.
ApplicationsThis module is widely used in industrial environments for monitoring speed on critical assets, including steam and gas turbines, centrifugal compressors, fans, and large motors. It serves as a primary input for safety-instrumented systems requiring overspeed detection and phase-locked vibration monitoring.Technical Specifications
Manufacturer
Bently Nevada
Part Number
3500/50-04-01
Series
3500 Machinery Protection System
Product Type
Tachometer Module
Channels
2 independent tachometer channels
Input Compatibility
Proximity probes or magnetic pickups
Power Consumption
8 W typical
Operating Temperature
-30 degC to +65 degC
Storage Temperature
-40 degC to +85 degC
Humidity
95% non-condensing
Installation Guidelines
Ensure the 3500 rack power is disconnected before installing or removing the module.
The module is designed for standard half-height 3500 rack slots; ensure proper seating and engagement with the backplane connectors.
Use shielded cabling for all transducer inputs to minimize electromagnetic interference (EMI).
Maintain proper grounding practices for the 3500 rack to ensure signal integrity and safety compliance.
Verify that the I/O module matches the configuration settings in the 3500 Rack Configuration Software before commissioning.
FAQQ: Can the 3500/50 module be used for overspeed protection?A: Yes, the module is designed for high-integrity overspeed protection and can be configured in redundant pairs to meet safety requirements.Q: What type of sensors does this module support?A: The 3500/50-04-01 supports standard proximity probes and magnetic pickup sensors for speed measurement.
نحن نقدم خدمة التوصيل في اليوم التالي من الاثنين إلى الجمعة إذا كان المنتج موجودًا في المخزون والاستثناءات في أيام العطلات.
عطلات نهاية الأسبوع
نحن لا نقدم أي تسليمات في عطلة نهاية الأسبوع.
دولي
نوفر خدمة التوصيل في اليوم التالي، حسب موقعك. تحقق من حالة طلبك عبر هذا الرابط.
DescriptionThe Bently Nevada 3300/55 Dual Velocity Monitor is a critical component of the 3300 Series machinery protection system. It is engineered to provide continuous monitoring of casing vibration velocity by interfacing with Velomitor piezo-velocity sensors. This module features two independent channels that compare real-time vibration data against user-defined alarm setpoints, ensuring reliable protection for rotating equipment such as turbines, compressors, motors, and pumps.Features
Dual-channel velocity monitoring for independent vibration analysis.
Compatible with standard Velomitor piezo-velocity sensors.
Integrated alarm and danger relay outputs for automated machinery trip functions.
Provides proportional 4-20 mA outputs for integration with external control and data acquisition systems.
Designed for seamless integration into the 3300 rack-based monitoring architecture.
ApplicationsThis monitor is primarily used in industrial environments for the protection of critical rotating machinery. It is suitable for monitoring casing vibration in high-speed turbines, centrifugal compressors, large industrial motors, and pumps where velocity-based vibration monitoring is required to detect mechanical degradation or imbalance.Technical Specifications
Model
3300/55-03-01-15-15-00-00-01-00
Brand
Bently Nevada
Input Type
Velomitor piezo-velocity sensors
Output Signals
Dynamic vibration, 4-20 mA proportional, voltage scaling
Operating Temperature
0 degC to +60 degC
Power Consumption
1.5 W typical
Installation Guidelines
Ensure the 3300 rack is powered down before inserting or removing the monitor module to prevent electrical damage.
Verify that the module is fully seated in the rack slot and that the front panel connectors are securely fastened.
Use shielded cabling for all sensor inputs to minimize electromagnetic interference (EMI) and signal noise.
Ensure proper grounding of the 3300 rack system according to the site-specific installation manual to maintain signal integrity.
Handle the module using ESD-safe practices to prevent damage to sensitive internal electronic components.
FAQWhat is the primary function of the 3300/55 monitor?The 3300/55 is designed to monitor casing vibration velocity using piezo-velocity sensors and provide alarm/trip relay logic to protect rotating machinery from damage.Is this module compatible with other sensor types?This specific configuration (15-15) is optimized for Velomitor piezo-velocity sensors. Refer to the Bently Nevada 3300 system documentation for compatibility with other sensor technologies.Does this module require external barriers?The suffix code 00 in the barrier option indicates that this unit is configured for standard input without intrinsic safety barriers.
نحن نقدم خدمة التوصيل في اليوم التالي من الاثنين إلى الجمعة إذا كان المنتج موجودًا في المخزون والاستثناءات في أيام العطلات.
عطلات نهاية الأسبوع
نحن لا نقدم أي تسليمات في عطلة نهاية الأسبوع.
دولي
نوفر خدمة التوصيل في اليوم التالي، حسب موقعك. تحقق من حالة طلبك عبر هذا الرابط.
DescriptionThe Bently Nevada 3300/55 Dual Velocity Monitor is a critical component of the 3300 Series machinery protection system. This module is engineered to monitor casing vibration velocity by interfacing with Velomitor piezo-velocity sensors. It provides two independent channels of continuous vibration monitoring, comparing real-time input values against user-defined Alert and Danger setpoints to ensure the integrity of rotating equipment such as turbines, compressors, motors, and pumps.Features
Dual-channel velocity monitoring for redundant or multi-point machinery protection.
Direct interface compatibility with Velomitor piezo-velocity sensors.
Integrated alarm logic with dedicated Alert and Danger relay outputs.
Proportional 4–20 mA output for integration with external PLC or DCS control systems.
Designed for seamless integration into existing 3300 Series rack environments.
ApplicationsThis monitor is widely utilized in heavy industrial environments for critical asset protection, including:
Steam and gas turbine vibration monitoring.
Centrifugal and reciprocating compressor casing vibration analysis.
Large motor and pump bearing housing velocity measurement.
Balance-of-plant rotating equipment requiring continuous vibration surveillance.
Technical Specifications
Model
3300/55-01-04-02-02-00-00-04-00
Brand
Bently Nevada
Input Type
Velomitor piezo-velocity sensors
Outputs
Dynamic vibration signals, 4–20 mA proportional
Operating Temperature
0 degC to +60 degC
Power Consumption
1.5 W (typical)
Installation Guidelines
Ensure the 3300 rack is powered down before inserting or removing the monitor module to prevent electrical damage.
Verify that the module is fully seated in the rack slot and that the front panel screws are tightened to ensure proper grounding and mechanical stability.
Use shielded twisted-pair cabling for sensor inputs to minimize electromagnetic interference (EMI) in high-noise industrial environments.
Ensure that input wiring is routed away from high-voltage AC power lines to maintain signal integrity.
Follow standard ESD handling procedures when touching the module circuitry.
FAQWhat is the primary function of the 3300/55 monitor?The 3300/55 is designed to measure vibration velocity on machine casings using piezo-velocity sensors and provide alarm relay outputs for machinery protection.Is this module compatible with other 3300 series components?Yes, this monitor is designed specifically for the Bently Nevada 3300 Series rack system and is compatible with standard 3300 series power supplies and I/O modules.Does this unit require external barriers?This specific model (suffix 00 for barriers) is configured for standard input and does not include intrinsic safety barriers.
نحن نقدم خدمة التوصيل في اليوم التالي من الاثنين إلى الجمعة إذا كان المنتج موجودًا في المخزون والاستثناءات في أيام العطلات.
عطلات نهاية الأسبوع
نحن لا نقدم أي تسليمات في عطلة نهاية الأسبوع.
دولي
نوفر خدمة التوصيل في اليوم التالي، حسب موقعك. تحقق من حالة طلبك عبر هذا الرابط.
DescriptionThe Bently Nevada 3300/35-03-02-02-01-00 is a 6-channel Temperature Monitor designed for the 3300 Series rack system. This module provides continuous, high-reliability monitoring of multiple temperature points in critical rotating machinery, such as turbines, compressors, and large motors. By comparing sensor inputs against user-defined alarm setpoints, the module facilitates predictive maintenance and provides essential machinery protection by triggering relay outputs during abnormal temperature conditions.Features
Six independent monitoring channels for high-density temperature data acquisition.
Compatible with standard industrial RTDs (Pt100, Pt1000) and thermocouples (J, K, T types).
Provides proportional 4 to 20 mA and 1 to 5 VDC outputs for integration with external control systems.
Integrated relay outputs for Alert and Danger alarm conditions.
Front-panel LED indicators for quick status verification of OK, Bypass, Alert, and Danger states.
Applications
Bearing temperature monitoring in rotating equipment.
Stator winding temperature sensing for large motors and generators.
Casing temperature monitoring for industrial compressors and turbines.
General-purpose multi-point temperature data acquisition in process plants.
Technical Specifications
Model
3300/35-03-02-02-01-00
Series
3300
Product Type
6-Channel Temperature Monitor
Operating Temperature
-35 degC to +65 degC
Power Consumption
Approx. 2 W
Inputs
6 Channels (RTD/Thermocouple)
Outputs
4-20 mA, 1-5 VDC, Relay
Installation Guidelines
Ensure the 3300 rack is powered down before inserting or removing the monitor module to prevent electrical damage.
The module must be seated firmly in the rack slot to ensure proper backplane communication and power distribution.
Use shielded cabling for all sensor inputs to minimize EMI/RFI interference in industrial environments.
Ensure proper grounding of the 3300 rack chassis to a common plant ground.
Handle with standard ESD precautions; avoid touching the module's backplane connector pins.
FAQWhat types of sensors are compatible with this module?The 3300/35-03-02-02-01-00 supports RTDs including Pt100 and Pt1000, as well as J, K, and T type thermocouples.Does this module provide alarm outputs?Yes, the module includes integrated relay outputs configured for Alert and Danger alarm conditions, allowing for direct interface with shutdown or alarm systems.
نحن نقدم خدمة التوصيل في اليوم التالي من الاثنين إلى الجمعة إذا كان المنتج موجودًا في المخزون والاستثناءات في أيام العطلات.
عطلات نهاية الأسبوع
نحن لا نقدم أي تسليمات في عطلة نهاية الأسبوع.
دولي
نوفر خدمة التوصيل في اليوم التالي، حسب موقعك. تحقق من حالة طلبك عبر هذا الرابط.
DescriptionThe Bently Nevada 3500/05-02-04-01-00-00 is a 12-inch Mini-Rack designed for the 3500 Machinery Protection System. This chassis serves as the foundational mechanical mounting platform and communication backplane for the installation of monitoring modules, power supplies, communication gateways, and system interface modules. It provides the necessary electrical interconnections for inter-module communication and distributes power throughout the system. With seven available module slots, this compact rack is ideal for applications where installation space is limited but full machinery protection functionality is required.Features
12-inch rack chassis with seven available module slots.
Panel Mount format with rear wiring access.
Integrated backplane for high-speed communication and power distribution.
CSA/NRTL/C Class I, Division 2 hazardous area approval.
Dedicated slots for 3500/15 Power Supply and 3500/22M Rack Interface Module (RIM).
Supports full range of 3500 series monitor, relay, and communication modules.
Applications
Upstream Production: Offshore/FPSO pumps, compressors, and turbines.
Refineries: Monitoring of FCCU, H2 compressors, and crude pumps.
LNG Plants: Safeguarding refrigeration/methane compressors and cryo expanders.
Pipeline Stations: Remote management of unmanned booster stations.
Power Generation: Protection for turbines, generators, and boiler feed pumps.
Hydroelectric: Monitoring of low-speed alignment and thrust for hydro-turbines.
Technical Specifications
Product Model
3500/05-02-04-01-00-00
Rack Size
12-inch Mini-Rack
Module Slots
7
Mounting Options
Panel Mount
Operating Temperature
-20 degC to +65 degC
Storage Temperature
-40 degC to +85 degC
Relative Humidity
Up to 95% RH, non-condensing
Agency Approval
CSA/NRTL/C
Installation Guidelines
Orientation: Mount the rack strictly horizontally. Vertical or inverted mounting impairs convective airflow and may exceed thermal limits.
Thermal Clearance: Maintain a minimum structural gap of 50 mm (2.0 inches) above and below the rack to allow for unobstructed airflow.
Enclosure: Use an industrial enclosure with a minimum rating of IP54 or NEMA 4 for harsh environments.
Handling: Ensure all power is disconnected before inserting or removing modules to prevent damage to the backplane connectors.
Grounding: Follow standard industrial grounding practices to ensure the rack chassis is properly bonded to the system earth to minimize EMI.
FAQWhat is the 3500/05-02-04-01-00-00?The 3500/05-02-04-01-00-00 is a 12-inch Mini-Rack chassis designed to house Bently Nevada 3500 series monitoring components in space-constrained applications.How many modules can this rack hold?The rack provides 7 slots total. Note that specific slots are reserved for the 3500/15 Power Supply and the 3500/22M Rack Interface Module (RIM).Does this rack include power supplies?No, the 3500/15 Power Supply module must be purchased separately.What is the difference between this and a full-size rack?The Mini-Rack is a 12-inch unit with 7 slots, whereas the standard full-size rack is 19 inches and provides 14 slots.
نحن نقدم خدمة التوصيل في اليوم التالي من الاثنين إلى الجمعة إذا كان المنتج موجودًا في المخزون والاستثناءات في أيام العطلات.
عطلات نهاية الأسبوع
نحن لا نقدم أي تسليمات في عطلة نهاية الأسبوع.
دولي
نوفر خدمة التوصيل في اليوم التالي، حسب موقعك. تحقق من حالة طلبك عبر هذا الرابط.
DescriptionThe Bently Nevada 3500/22-01-01-01 Transient Data Interface (TDI) Module serves as the primary communication gateway for the 3500 Series Machinery Protection System. This module acts as the critical interface between the 3500 rack and external software platforms, including System 1 Condition Monitoring and Diagnostic Software. It facilitates high-speed data collection, transient event capture, and advanced machinery diagnostics required for critical asset management.Features
Continuous online monitoring and high-speed transient data capture.
Seamless integration with System 1 software for predictive maintenance.
Supports high-speed Ethernet communication (10BASE-T/100BASE-TX).
Front panel LED indicators for OK, TX/RX, and Bypass status.
Designed for critical turbomachinery applications including turbines, compressors, and pumps.
Compliance with API 670 standards for machinery protection systems.
ApplicationsThe 3500/22 TDI module is intended for use in industrial environments where critical rotating machinery requires continuous protection and diagnostic analysis. It is essential for plants utilizing the Bently Nevada 3500 rack system to monitor vibration, position, and process variables for predictive maintenance strategies.Technical Specifications
Manufacturer
Bently Nevada
Model / Order Code
3500/22-01-01-01
Module Type
Standard Transient Data Interface
I/O Module Type
Ethernet 10BASE-T/100BASE-TX
Agency Approval
CSA/NRTL/C
Operating Temperature
-30 degC to +65 degC
Storage Temperature
-40 degC to +85 degC
Humidity
95% non-condensing
Power Consumption
6 W (typical)
Installation Guidelines
Ensure the 3500 rack is powered down before inserting or removing the TDI module or its associated I/O module.
The module must be installed in the designated communication slot of the 3500 rack.
Ensure proper seating of the module into the backplane to prevent intermittent communication failures.
Use shielded Ethernet cabling for all network connections to minimize EMI interference in industrial environments.
Handle the module using ESD-safe practices to prevent damage to internal circuitry.
Verify that the rear I/O module is correctly aligned and secured to the rack chassis.
FAQWhat is the primary function of the 3500/22 TDI module?The TDI module acts as the communication bridge between the 3500 rack and external software, such as System 1, allowing for real-time data transfer and transient data capture for machinery diagnostics.Does this module support Ethernet communication?Yes, the 3500/22-01-01-01 includes an Ethernet 10BASE-T/100BASE-TX I/O module for high-speed connectivity.Is this module compliant with safety standards?This specific configuration (01) includes CSA/NRTL/C approval for use in hazardous or industrial locations as specified by the certification.
نحن نقدم خدمة التوصيل في اليوم التالي من الاثنين إلى الجمعة إذا كان المنتج موجودًا في المخزون والاستثناءات في أيام العطلات.
عطلات نهاية الأسبوع
نحن لا نقدم أي تسليمات في عطلة نهاية الأسبوع.
دولي
نوفر خدمة التوصيل في اليوم التالي، حسب موقعك. تحقق من حالة طلبك عبر هذا الرابط.
DescriptionThe Bently Nevada 125972-02 is a 3500/42 Proximitor/Seismic Monitor module designed for the 3500 Machinery Protection System. This four-channel module provides continuous monitoring of vibration and position signals, making it essential for protecting critical rotating machinery such as turbines, compressors, and pumps. It processes inputs from proximity probes, seismic transducers, and velocity sensors, comparing them against user-defined alarm setpoints to trigger alerts or machinery shutdowns as required.Features
Four independent monitoring channels for flexible sensor configuration.
Supports inputs from Proximitor proximity probes, seismic transducers, and velocity sensors.
Programmable alarm thresholds (Alert and Danger) with configurable voting logic.
Full integration with the Bently Nevada 3500 rack system for centralized diagnostics and data communication.
Software-configurable via the 3500 Rack Configuration Software.
Applications
Shaft vibration monitoring for rotating equipment.
Axial position and thrust monitoring.
Seismic activity detection for industrial machinery.
Critical asset protection in oil, gas, and power generation facilities.
Technical Specifications
Model
125972-02
Channels
4
Operating Temperature
-30 degC to +65 degC
Storage Temperature
-40 degC to +85 degC
Humidity
95% non-condensing
Power Consumption
Supplied via 3500 rack backplane
Installation Guidelines
Ensure the 3500 rack is powered down before inserting or removing the module to prevent damage to the backplane connectors.
The module is designed for standard 3500 rack slots; ensure proper seating and tighten the front panel screws to maintain a secure ground connection.
Use shielded cabling for all sensor inputs to minimize EMI/RFI interference.
Follow proper ESD handling procedures when touching the module circuitry.
Verify that the I/O module and the monitor module are correctly matched within the rack configuration.
Compliance and Certifications
Safety: EN 61010-1, LV Directive 2014/35/EU
EMC: EN 61000-6-2 (Immunity), EN 61000-6-4 (Emissions)
Hazardous Area: CSA/NRTL/C Class I, Zone 2; ATEX options available
Environmental: RoHS Directive 2011/65/EU compliant
FAQIs this module compatible with all 3500 racks?Yes, the 125972-02 is designed for the standard 3500 series rack system, provided the rack is configured with the appropriate I/O modules and power supplies.Does this module require external power?No, the module receives its operating power directly from the 3500 rack power supplies via the backplane.
نحن نقدم خدمة التوصيل في اليوم التالي من الاثنين إلى الجمعة إذا كان المنتج موجودًا في المخزون والاستثناءات في أيام العطلات.
عطلات نهاية الأسبوع
نحن لا نقدم أي تسليمات في عطلة نهاية الأسبوع.
دولي
نوفر خدمة التوصيل في اليوم التالي، حسب موقعك. تحقق من حالة طلبك عبر هذا الرابط.
DescriptionThe Bently Nevada 3500/22M 288055-01 is a Standard Transient Data Interface (TDI) module designed for the 3500 Machinery Protection System. It serves as the primary gateway between the 3500 monitoring system and Bently Nevada's System 1 machinery management software. By combining the functionality of a 3500/20 Rack Interface Module (RIM) with the data collection capabilities of a communication processor, the TDI enables the continuous collection of steady-state and transient waveform data.Features
Integrates 3500 monitoring system data with System 1 machinery management software.
Combines the capabilities of a 3500/20 RIM with advanced communication processor functions.
Supports USB-B front panel connectivity for local configuration and diagnostics.
Operates in conjunction with M-series monitors (e.g., 3500/40M, 3500/42M) for comprehensive data acquisition.
Standard static data capture with optional dynamic/transient data capture capabilities.
Occupies a single rack slot, typically located in Slot 1 adjacent to the power supplies.
Applications
Power Generation: Monitoring of steam turbines, gas turbines, and large generators.
Oil & Gas: Critical monitoring for compressors, pumps, and high-value rotating equipment.
Chemical & Petrochemical: Vibration monitoring for large motors, blowers, and pumps in hazardous environments.
Heavy Manufacturing: Mechanical vibration monitoring for large-scale industrial machinery.
Technical Specifications
Product Model
3500/22M 288055-01
Module Type
Standard Transient Data Interface
Communication Interface
USB-B (Front Panel)
Baud Rate
115.2 kbaud maximum
Power Consumption
10.5 W
Operating Voltage
220/250 VAC / 30 VDC
Weight
0.8 kg
Installation Guidelines
The 3500/22M module is designed for installation in the designated RIM slot (Slot 1) of a 3500 rack.
Ensure the rack power is disconnected before inserting or removing the module to prevent electrical damage.
Handle the module using ESD-safe practices to protect internal circuitry.
Ensure the module is fully seated and the front panel levers are engaged to ensure proper backplane connection.
Route communication cables away from high-EMI sources to maintain signal integrity.
Verify that the rack configuration matches the module settings before commissioning.
FAQWhat is the primary role of the 3500/22M?The 3500/22M acts as the communication interface that links the 3500 monitoring system to external software, such as System 1, allowing for data collection and system management.Where should this module be installed in the rack?The TDI module must be installed in Slot 1 of the 3500 rack, which is the position immediately adjacent to the power supply modules.Is this module compatible with older systems?The 288055-01 is the updated version of the Transient Data Interface, replacing older versions such as the 138607-01. It is designed to be backward compatible within the 3500 rack environment.
DescriptionThe Bently Nevada 133843-01 is a Thermocouple (TC) Isolated I/O Module designed for use with the 3500/60 Temperature Monitor system. This module provides critical temperature monitoring capabilities for rotating machinery, such as turbines and compressors, by processing thermocouple inputs from bearings, stators, and other machine components. The 133843-01 is specifically engineered for systems utilizing external termination blocks, which facilitates easier field wiring and maintenance by separating the signal termination points from the rack backplane.Features
Isolated Inputs: Each thermocouple channel is electrically isolated to minimize ground loops and signal interference, ensuring high measurement integrity.
External Termination Design: Supports external termination blocks to streamline installation and simplify cable management within the control cabinet.
System Integration: Fully compatible with the Bently Nevada 3500 rack-based monitoring system, supporting standard alarm and danger setpoint configurations.
Reliability: Designed for continuous operation in demanding industrial environments, providing essential data for machinery protection and condition monitoring.
ApplicationsThis module is intended for use in critical asset protection systems, including:
Temperature monitoring of hydrodynamic bearings.
Stator winding temperature tracking in large motors and generators.
Process temperature monitoring for industrial compressors and turbines.
Technical Specifications
Model
133843-01
Series
3500/60
Input Type
Thermocouple (TC)
Isolation
Isolated channels
Operating Temperature
-30 to +65 degC
Storage Temperature
-40 to +85 degC
Humidity
95%, non-condensing
Installation Guidelines
ESD Precautions: Always use a grounded wrist strap when handling the module to prevent electrostatic discharge damage to internal circuitry.
Rack Seating: Ensure the module is fully seated in the 3500 rack slot and that the front panel screws are tightened to maintain proper grounding and EMI shielding.
Wiring: Use shielded thermocouple extension wire to maintain signal integrity. Ensure external termination blocks are wired according to the specific 3500/60 system documentation.
Power: The 3500 system is designed for hot-swapping; however, always verify system configuration before inserting or removing modules in an active rack.
FAQIs this module compatible with all 3500 racks?The 133843-01 is designed for the 3500/60 Temperature Monitor system. It must be used in conjunction with the appropriate 3500/60 monitor module and requires an external termination block for signal connection.Does this module require external power?No, the module receives its operating power directly from the 3500 rack backplane once installed.
نحن نقدم خدمة التوصيل في اليوم التالي من الاثنين إلى الجمعة إذا كان المنتج موجودًا في المخزون والاستثناءات في أيام العطلات.
عطلات نهاية الأسبوع
نحن لا نقدم أي تسليمات في عطلة نهاية الأسبوع.
دولي
نوفر خدمة التوصيل في اليوم التالي، حسب موقعك. تحقق من حالة طلبك عبر هذا الرابط.
Description
The Bently Nevada 130944-01 (often associated with part number 128275-01F) is a blank module designed for the Bently Nevada 3500 Series Machinery Protection System. This full-height monitor blank front panel is used to cover unused slots within the 3500 system rack. It serves as a protective barrier, ensuring that internal rack components are shielded from environmental contaminants while maintaining the structural integrity and proper airflow management of the rack assembly.
Features
Compatible with all 3500 System rack configurations (Full-size and Mini-rack).
Provides a clean, professional finish for unused module slots.
Essential for maintaining proper cooling airflow within the 3500 rack.
Constructed to match the standard 3500 series form factor.
Protects backplane connectors and internal electronics from dust and debris.
Applications
This blank module is used in various industrial environments where Bently Nevada 3500 systems are deployed, including:
Thermal and nuclear power plants.
Hydroelectric power generation facilities.
Oil and gas pipeline booster stations and offshore platforms.
Petrochemical refineries and ethylene/propylene plants.
Heavy manufacturing facilities, including steel mills and cement plants.
Technical Specifications
Manufacturer
Bently Nevada
Part Number
130944-01
Associated Part
128275-01F
Module Type
Blank Module / Front Panel
Operating Temperature
-40 degC to +85 degC
Storage Temperature
-40 degC to +85 degC
Weight
0.05 kg
Installation Guidelines
Ensure the 3500 rack power is managed according to site safety protocols before performing maintenance.
Align the blank module with the guide rails of the empty slot in the 3500 rack.
Slide the module into the slot until it is flush with the front of the rack.
Secure the module using the integrated captive fasteners to ensure a proper ground connection and mechanical stability.
Always keep unused slots covered to prevent airflow bypass and protect the backplane from foreign objects.
FAQs
What is the primary function of the 130944-01 blank module?
The module acts as a protective cover for empty slots in a Bently Nevada 3500 rack. It prevents dust ingress, maintains the rack's aesthetic, and ensures that cooling airflow is directed correctly through the installed monitor modules.
Is this module compatible with both full-size and mini-racks?
Yes, the 130944-01 is designed to be compatible with the standard 3500 system rack architecture, including both full-size and mini-rack configurations.
نحن نقدم خدمة التوصيل في اليوم التالي من الاثنين إلى الجمعة إذا كان المنتج موجودًا في المخزون والاستثناءات في أيام العطلات.
عطلات نهاية الأسبوع
نحن لا نقدم أي تسليمات في عطلة نهاية الأسبوع.
دولي
نوفر خدمة التوصيل في اليوم التالي، حسب موقعك. تحقق من حالة طلبك عبر هذا الرابط.
Description
The Bently Nevada 3500/33 149986-01 is a full-height, 16-channel relay module designed for the 3500 Machinery Protection System. This module provides 16 independent relay outputs that can be programmed to perform specific voting logic for machinery protection and control. It is designed to be installed in any slot to the right of the Transient Data Interface (TDI) module within a 3500 rack.
Features
16 independent relay outputs.
Integrated Alarm Drive Logic for sophisticated alarm management.
Supports AND/OR logic functions based on Alert, Danger, or Not-OK status.
Programmable via 3500 Rack Configuration Software.
Hot-swappable design allows for removal or installation without powering down the rack.
Full-height module form factor.
Applications
Critical machinery protection in oil and gas, power generation, and petrochemical industries.
Turbine monitoring (bearings and stator windings).
Pump and motor protection (winding and bearing housing temperatures).
Gearbox monitoring (internal friction and lubrication failure detection).
General industrial equipment protection (fans, blowers, extruders).
Technical Specifications
Model
3500/33 149986-01
Channels
16 Relay Outputs
Max Switched Voltage
125 Vdc / 30 Vdc
Max Switched Current
5 A
Min Switched Current
100 mA @ 5 Vdc
Power Consumption
5.8 Watts (typical)
Relay Contact Life
10,000 cycles
Operating Temperature
-30 degC to +65 degC
Storage Temperature
-40 degC to +85 degC
Enclosure Rating
IP20
Installation Guidelines
Ensure the rack is powered down or follow hot-swap procedures if the system supports it.
Insert the 3500/33 module into any available slot to the right of the Rack Interface Module (TDI).
Install the corresponding I/O module (field wiring module) on the backplane behind the 3500/33 module before applying power.
Use shielded cabling for field connections to minimize EMI interference.
Ensure proper grounding of the 3500 rack to maintain signal integrity and safety.
Handle with ESD precautions to prevent damage to sensitive electronic components.
FAQs
What is the 3500/33 149986-01 used for?It provides 16 relay outputs for machinery alarms and shutdown logic, essential for protecting critical rotating equipment.
What software is required for configuration?The module is configured using the 3500 Rack Configuration Software, typically requiring version 3.3 or higher.
Is this module hot-swappable?Yes, the 3500/33 is designed to be removed or installed while the rack is powered without disrupting the operation of other modules.
نحن نقدم خدمة التوصيل في اليوم التالي من الاثنين إلى الجمعة إذا كان المنتج موجودًا في المخزون والاستثناءات في أيام العطلات.
عطلات نهاية الأسبوع
نحن لا نقدم أي تسليمات في عطلة نهاية الأسبوع.
دولي
نوفر خدمة التوصيل في اليوم التالي، حسب موقعك. تحقق من حالة طلبك عبر هذا الرابط.
Description
The Bently Nevada 3500/42M 176449-02 is a high-performance Proximitor/Seismic Monitor module designed for the 3500 Machinery Protection System. This 4-channel module provides continuous monitoring of vibration, position, and seismic measurements by accepting signals from proximity probes, Velomitor sensors, accelerometers, and other compatible transducers. It conditions incoming signals, performs real-time measurement calculations, and compares results against user-configurable alarm setpoints to support critical machinery protection and condition monitoring programs.
Features
4-channel monitoring capability for high-density rack configurations.
Supports diverse measurement types: radial vibration, shaft absolute vibration, thrust position, differential expansion, velocity, acceleration, and eccentricity.
Independent channel configuration via 3500 Rack Configuration Software.
Internal safety barriers (indicated by -02 suffix) for hazardous area isolation.
Buffered outputs on the front panel for portable vibration analyzer connection without signal interruption.
Programmable alarm setpoints (Alert and Danger) and time delays to prevent false trips.
Applications
Power Generation: Monitoring stability of large steam and gas turbines and generators.
Oil & Gas: Protection for high-pressure compressors, pumps, and critical rotating assets in refineries and offshore platforms.
Manufacturing: Asset protection for heavy industrial rotating machinery.
Technical Specifications
Parameter
Specification
Model
3500/42M 176449-02
Channels
4
Operating Temperature
-30 degC to +65 degC
Storage Temperature
-40 degC to +85 degC
Humidity
95% Non-condensing
Power Consumption
7.7 Watts (typical)
Transducer Power Supply
-24 Vdc
Output Impedance
550 Ohm
Installation Guidelines
Ensure the 3500 rack is powered down before inserting or removing the module to prevent electrical damage.
The module must be seated correctly in the designated rack slot; ensure the backplane connector is fully engaged.
Use shielded cabling for all transducer inputs to minimize EMI/RFI interference in industrial environments.
Channel pairs (1/2 and 3/4) must be configured with compatible monitoring functions.
Maintain proper ventilation within the cabinet to stay within the specified operating temperature range.
FAQ
What does the -02 suffix indicate?The -02 suffix denotes that the module is equipped with an I/O module featuring internal safety barriers, suitable for isolating signals in hazardous environments.
Can I use this for seismic monitoring?Yes, the 3500/42M is specifically designed to accept inputs from seismic transducers to detect and analyze ground or housing vibrations.
How do I configure the alarm setpoints?Alarm setpoints and time delays (1 to 60 seconds) are programmed using the Bently Nevada 3500 Rack Configuration Software.
نحن نقدم خدمة التوصيل في اليوم التالي من الاثنين إلى الجمعة إذا كان المنتج موجودًا في المخزون والاستثناءات في أيام العطلات.
عطلات نهاية الأسبوع
نحن لا نقدم أي تسليمات في عطلة نهاية الأسبوع.
دولي
نوفر خدمة التوصيل في اليوم التالي، حسب موقعك. تحقق من حالة طلبك عبر هذا الرابط.
DescriptionThe Bently Nevada 3500/32M (order code 149986-02) is a 4-channel, full-height relay module designed for the 3500 Machinery Protection System. This module provides four independent relay outputs that serve as critical interfaces for alarm and machinery shutdown functions. It requires a 3500/22 Transient Data Interface (TDI) module to operate within the rack and supports complex, user-defined voting logic to ensure reliable machine protection.Features
Full-height module design for 3500 rack integration.
Four independent, programmable relay outputs.
Supports advanced alarm drive logic using AND/OR gates.
Configurable via Bently Nevada 3500 Rack Configuration Software.
Epoxy-sealed relay construction for environmental durability.
Integrated arc suppression (250 Vrms) for contact protection.
Applications
Electric Power: Steam turbine generators, gas turbines, and large water pumps.
Oil & Gas: Centrifugal and reciprocating compressors, turbine-driven pumps, and offshore power systems.
Petrochemical: Ethylene cracking gas compressors and ammonia compressors.
Steel & Metallurgy: Blast furnace blowers and rolling mill motors.
Maritime: Main propulsion systems and auxiliary power generation monitoring.
Technical Specifications
Product Model
3500/32M 149986-02
Output Type
Single-pole, double-throw (SPDT) relays
Number of Channels
4
Max Switched Voltage
250 Vac / 30 Vdc
Max Switched Current
2 A
Power Consumption
5.8 W (typical)
Contact Life
100,000 cycles @ 5 A, 24 Vdc or 240 Vac
Operating Temperature
-30 degC to +65 degC
Storage Temperature
-40 degC to +85 degC
Installation Guidelines
Rack Placement: Install in any slot to the right of the 3500/22 Transient Data Interface (TDI) module.
Safety Warning: Always power down the rack before inserting or removing modules to prevent electrical damage or unexpected signal triggering.
Wiring: Use caution when connecting high-voltage field wiring. Ensure no conductors are exposed to prevent shock hazards.
Functional Safety: If used in SIL or hazardous area applications, restrict switched voltage to 30 Vdc/Vac to maintain compliance.
Handling: Use standard ESD precautions when handling the module to protect internal circuitry.
FAQsWhat is the 3500/32M 149986-02?It is a 4-channel, full-height relay module for the Bently Nevada 3500 Monitoring System, used to provide alarm and control outputs for machinery protection.Does this module support voting logic?Yes, each of the four relay outputs can be independently programmed using AND/OR logic gates to trigger based on specific alarm inputs or channel statuses.Where is this module installed?The module is installed in the 3500 rack, specifically in any slot located to the right of the 3500/22 Transient Data Interface (TDI) module.
نحن نقدم خدمة التوصيل في اليوم التالي من الاثنين إلى الجمعة إذا كان المنتج موجودًا في المخزون والاستثناءات في أيام العطلات.
عطلات نهاية الأسبوع
نحن لا نقدم أي تسليمات في عطلة نهاية الأسبوع.
دولي
نوفر خدمة التوصيل في اليوم التالي، حسب موقعك. تحقق من حالة طلبك عبر هذا الرابط.
DescriptionThe Bently Nevada 162291-01 is a 16-channel Relay Module designed for the 3500 Machinery Protection System. This module provides high-density relay outputs to facilitate automated machinery shutdown and emergency notification protocols. Integrated into safety-critical environments such as gas turbine stations, refineries, and chemical processing plants, the 162291-01 translates alarm statuses from monitoring modules into physical contact closures. By enabling voting logic—such as 2-out-of-3 or 1-out-of-16 configurations—it provides a sophisticated layer of protection that prevents catastrophic equipment failure while minimizing the risk of costly false trips caused by single-instrument malfunctions.System Architecture and Relay LogicThe 3500/33 16-channel relay system consists of two primary components: the 16-channel Relay Module and the associated 16-channel Relay Interface Module. The 162291-01 is the internal module that manages the digital logic and communication with the 3500 backplane. Each of the 16 relays is fully programmable via the 3500 Rack Configuration Software, allowing for independent assignment of alarm drive logic. The module supports normally energized and normally de-energized states, as well as latching or non-latching alarm behaviors. This hardware architecture ensures that the machinery protection system can interface with external Distributed Control Systems (DCS) or Emergency Shutdown (ESD) systems with maximum reliability and deterministic response times.Features
16 independent SPDT (Single-Pole, Double-Throw) relay outputs.
Configurable via 3500 Rack Configuration Software.
Supports complex voting logic (e.g., 2-out-of-3).
Programmable alarm drive logic (latching/non-latching, normally energized/de-energized).
High-density design for space-efficient rack mounting.
Applications
Machinery protection for rotating equipment.
Emergency Shutdown (ESD) system integration.
Alarm annunciation in industrial control environments.
DCS interface for critical status monitoring.
Technical Specifications
Model
162291-01
Output Channels
16 SPDT Relays
Contact Ratings
5 A at 30 VDC or 250 VAC
Power Consumption
5.8 W (typical)
Operating Temperature
-30 to 65 deg C
Storage Temperature
-40 to 85 deg C
Humidity
95% non-condensing
Mounting
3500 System Rack Slot
Installation Guidelines
Ensure the 3500 rack is powered down before inserting or removing the module.
The module must be installed in an appropriate slot within the 3500 system rack, paired with the required Relay Interface Module.
Handle the module using standard ESD (Electrostatic Discharge) protection practices to prevent damage to internal circuitry.
Verify that all field wiring is properly secured to the I/O terminal blocks and that shielded cables are used where required to minimize EMI.
Ensure adequate ventilation within the cabinet to maintain operating temperatures within the specified -30 to 65 deg C range.
FAQWhat is the primary function of the 162291-01 module?The 162291-01 is a relay output module for the Bently Nevada 3500 system, used to trigger external alarms or shutdown devices based on the alarm status of monitored machinery.Does this module support voting logic?Yes, the module is designed to support various voting logic configurations, such as 2-out-of-3, to improve system reliability and prevent false trips.Is this module compatible with all 3500 racks?The 162291-01 is designed for the standard Bently Nevada 3500 Machinery Protection System. Please ensure your rack configuration supports the 3500/33 series modules.
نحن نقدم خدمة التوصيل في اليوم التالي من الاثنين إلى الجمعة إذا كان المنتج موجودًا في المخزون والاستثناءات في أيام العطلات.
عطلات نهاية الأسبوع
نحن لا نقدم أي تسليمات في عطلة نهاية الأسبوع.
دولي
نوفر خدمة التوصيل في اليوم التالي، حسب موقعك. تحقق من حالة طلبك عبر هذا الرابط.
DescriptionThe Bently Nevada 3300/55 Dual Velocity Monitor is a rack-mounted module engineered to measure casing vibration velocity using piezo-velocity sensors, such as the Bently Nevada Velomitor. This module provides two independent velocity channels, continuously comparing input signals against user-defined alarm setpoints to provide critical protection for rotating machinery including turbines, compressors, motors, and pumps. By integrating directly into the 3300 rack system, it delivers reliable velocity data essential for both machinery protection and predictive maintenance programs.Features
Dual-channel velocity monitoring for independent measurement paths.
Compatible with Velomitor piezo-velocity sensors.
Integrated alarm setpoint comparison for Alert and Danger conditions.
Dual relay outputs for automated machinery shutdown or alarm annunciation.
Front-panel LED indicators for system status, including OK, Bypass, Alert, and Danger.
Configurable scaling and output options (4-20 mA, 1-5 VDC, 0 to -10 VDC).
ApplicationsThis module is designed for use in industrial environments where casing vibration monitoring is required to detect mechanical degradation. Typical applications include monitoring of centrifugal pumps, gas and steam turbines, large industrial motors, and reciprocating compressors.Technical Specifications
Model
3300/55-01-01-02-02-00-00-03-00
Brand
Bently Nevada
Series
3300
Operating Temperature
0 to 60 degC
Power Consumption
~1.5 W
Signal Conditioning Accuracy
±0.33% typical, ±1% max at 25 degC
Output Signals
4-20 mA, 1-5 VDC, 0 to -10 VDC
Installation Guidelines
Ensure the 3300 rack is powered down before inserting or removing the monitor module to prevent electrical damage.
Verify that the module is fully seated in the rack slot to ensure proper backplane connection.
Use shielded twisted-pair cabling for transducer inputs to minimize EMI/RFI interference.
Ensure proper grounding of the 3300 rack system according to site electrical safety standards.
Handle with care using ESD-safe procedures to protect sensitive internal circuitry.
Confirm that the configuration jumpers and software settings match the specific transducer type and required alarm logic before commissioning.
FAQWhat is the purpose of the 3300/55 module?The 3300/55 is a dual-channel monitor used to measure casing vibration velocity. It processes signals from Velomitor sensors and provides alarm outputs to protect critical rotating equipment.How are the alarm setpoints managed?The module continuously compares the input velocity signals against pre-configured setpoints. When these thresholds are exceeded, the module triggers the internal relays to provide Alert or Danger status signals.Can this module be used with other sensors?This specific model (3300/55-01-01-02-02-00-00-03-00) is configured for Velomitor piezo-velocity sensors. Consult the Bently Nevada 3300 system manual for compatibility with other sensor types.
نحن نقدم خدمة التوصيل في اليوم التالي من الاثنين إلى الجمعة إذا كان المنتج موجودًا في المخزون والاستثناءات في أيام العطلات.
عطلات نهاية الأسبوع
نحن لا نقدم أي تسليمات في عطلة نهاية الأسبوع.
دولي
نوفر خدمة التوصيل في اليوم التالي، حسب موقعك. تحقق من حالة طلبك عبر هذا الرابط.
DescriptionThe Bently Nevada 136711-01 is an I/O module designed for the 3500/60 Temperature Monitor system. This module facilitates the interface between field sensors and the 3500 rack, providing reliable signal processing for temperature monitoring applications in critical rotating machinery environments.Features
Supports multiple analog input ranges including 4-20 mA and +/- 10V signals.
Configurable analog outputs for 4-20 mA, 0-20 mA, and voltage ranges of +/- 10V or 0-10V.
Integrated digital inputs rated for 24V DC operation.
Equipped with relay contacts rated for 2A at 30V DC or 250V AC.
Designed for high-reliability operation in industrial environments with a wide temperature range.
Technical Specifications
Model
136711-01
System Compatibility
3500/60 Temperature Monitor
Analog Inputs
4-20 mA, +/- 10V
Analog Outputs
4-20 mA, 0-20 mA, +/- 10V, 0-10V
Digital Inputs
24V DC (+/- 10%)
Relay Contact Rating
2A @ 30V DC / 250V AC
Operating Temperature
-40 degC to +70 degC (-40 degF to +158 degF)
Humidity
5-95% non-condensing
Installation Guidelines
Ensure the 3500 rack is powered down before inserting or removing the I/O module to prevent electrical damage.
Verify that the module is correctly seated in the designated rack slot to ensure proper backplane communication.
Use appropriate shielded cabling for all analog and digital I/O to minimize electromagnetic interference (EMI).
Maintain proper grounding practices as specified in the Bently Nevada 3500 system manual to ensure signal integrity.
Ensure adequate ventilation around the rack to maintain operating temperatures within the specified -40 degC to +70 degC range.
FAQIs this module compatible with other 3500 series monitors?The 136711-01 is specifically designed for the 3500/60 Temperature Monitor. Please consult your system configuration documentation to ensure compatibility with your specific rack setup.What is the primary function of this I/O module?This module acts as the interface between field-mounted temperature sensors and the 3500 monitoring system, allowing for signal conditioning, alarm relay activation, and transmission of analog data to external control systems.
نحن نقدم خدمة التوصيل في اليوم التالي من الاثنين إلى الجمعة إذا كان المنتج موجودًا في المخزون والاستثناءات في أيام العطلات.
عطلات نهاية الأسبوع
نحن لا نقدم أي تسليمات في عطلة نهاية الأسبوع.
دولي
نوفر خدمة التوصيل في اليوم التالي، حسب موقعك. تحقق من حالة طلبك عبر هذا الرابط.
The Bently Nevada 330400-02-CN is a high-performance accelerometer designed for critical machinery casing vibration monitoring. Engineered to meet the stringent requirements of API 670, this transducer provides reliable acceleration measurements for industrial applications, including gear mesh monitoring and high-speed rotating equipment analysis.Features
Sensitivity: 10.2 mV/m/s2 (100 mV/g) ±5%
Frequency Response: 10 Hz to 15 kHz or 30 Hz to 10 kHz
Amplitude Range: 490 m/s2 (50 g) peak
Transverse Sensitivity: Less than 5% of axial
Amplitude of Resonant Peak: 20 dB maximum
Hazardous Area Approvals: Includes CSA, ATEX, and IECEx (CN suffix)
Robust Design: IP68 rated for harsh industrial environments
Applications
Turbines: Steam and gas turbine vibration monitoring
Compressors: Centrifugal and axial compressor health
Pumps: High-speed centrifugal pumps
Motors & Generators: Heavy-duty motor applications
Petrochemical Plants: Monitoring equipment in hazardous locations
Mining & Mineral Processing: Conveyor systems, crushers, and grinders
Technical Specifications
Model
330400-02-CN
Sensitivity
10.2 mV/m/s2 (100 mV/g) ±5%
Amplitude Range
490 m/s2 (50 g) peak
Broadband Noise Floor
0.039 m/s2 (0.004 g) rms
Operating Temperature
-55 degC to +121 degC
Power Requirement
-24 Vdc
Mounting
M8 x 1 integral stud
Installation Guidelines
Ensure the mounting surface is flat and clean to maintain accurate high-frequency response.
Always power down the monitoring system before connecting or disconnecting the transducer.
Use shielded cabling to minimize EMI/RFI interference; the system supports cable lengths up to 305 meters (1000 ft).
Verify that the "CN" hazardous area approval matches your local site requirements before installation.
Periodic calibration is recommended to maintain the integrity of the vibration protection system.
FAQWhat is the 330400-02-CN?The Bently Nevada 330400-02-CN is a 3300 XL series accelerometer designed for critical machinery casing vibration monitoring.What is the primary use of this transducer?It is primarily used for monitoring casing vibration in critical rotating machinery such as turbines, compressors, and high-speed pumps, specifically for detecting gear mesh issues.What are the environmental limits?The unit is rated IP68 for dust and water resistance and operates within a temperature range of -55 degC to +121 degC (-67 degF to +250 degF).
