Available on working days between 9:00 am to 6:00 pm
Email us: sales2@industriaxplc.com
Available 24/7 for inquiries and support
Description
ABB SD834 3BSC610067R1 Power Supply Device
Configured for 24 VDC power conversion and industrial DC supply distribution in ABB automation systems, the ABB SD834 3BSC610067R1 (SD834 Power Supply Device) provides direct electrical conversion from AC/DC input sources to a regulated 24 VDC output supply.
Hardware Specifications
Parameter
Specification
Model
SD834 3BSC610067R1
Brand
ABB
Product Type
Power Supply Device
Origin
Sweden
Weight
1.3 kg
Dimensions
15.5 x 23 x 36 cm (estimated shipping size)
Operating Temp
Not specified
Power Consumption
547/568 VA rated input power
Input Voltage
100-240 VAC or 110-150 VDC
Output Voltage
24 VDC
Rated Output Current
20 A
Rated Output Power
480 W
Efficiency
92.4/93.9 %
Application
SELV and PELV systems
ABB Industrial Power Architecture and Control System Integration
The ABB SD834 3BSC610067R1 operates as a switch-mode power supply component within ABB industrial control architectures. It converts mains AC or DC input power into a regulated 24 VDC output used for control equipment, I/O modules, and automation system components.
Furthermore, the SD834 supports SELV and PELV applications by maintaining separated low-voltage output characteristics. The module design fits ABB power distribution structures where stable DC voltage delivery and load capacity management are required.
The unit supports ABB system power configurations with high output density. Therefore, its 20 A rated output current allows connection to multiple automation devices while maintaining defined electrical load limits.
Frequently Asked Questions
Q: What input voltage ranges does the ABB SD834 3BSC610067R1 support? A: The SD834 accepts 100-240 VAC input or 110-150 VDC input sources according to the provided technical specifications.
Q: What output parameters are provided by the SD834 power supply device? A: The module provides a 24 VDC output with a rated current of 20 A and rated output power of 480 W.
Q: Can the SD834 be used for SELV and PELV applications? A: Yes. The SD834 is specified for SELV and PELV applications within compatible ABB industrial automation installations.
Field Installation Guidelines
Install the SD834 in an enclosure that provides suitable mechanical protection and environmental control.
Verify that input voltage wiring matches the specified AC or DC supply range before energizing the module.
Use appropriate cable sizing based on the 20 A output current requirement and connected load conditions.
Separate power wiring from sensitive signal cables to reduce electrical interference.
Connect protective grounding according to the applicable industrial electrical installation standards.
Confirm output polarity before connecting downstream 24 VDC devices.
Check ventilation clearance and mounting conditions according to the system cabinet design requirements.
