Description

Schneider Electric 140XBP00600 Modicon Quantum Rack Backplane

The Schneider Electric 140XBP00600 (140XBP00600 Rack Backplane) operates as a dedicated hardware interconnect component for Modicon Quantum I/O and processor module distribution within Quantum rack-based PLC architectures. Configured for local, remote, and distributed I/O module insertion, the Schneider Electric 140XBP00600 provides direct physical backplane signal routing and power distribution across a 6-slot chassis structure.

Suffix Breakdown & Model Matrix

No validated manufacturer-defined suffix segmentation or functional sub-code decomposition is specified for model 140XBP00600. The designation is treated as a single-order rack backplane identifier within the Modicon Quantum platform.

Hardware Specifications

Parameter	Specification
ModelBrand	Schneider Electric 140XBP00600
Origin	France
Weight	0.64 kg (net), 1.27 kg (package)
Dimensions	37.8 cm x 29.6 cm x 4.6 cm (package 1)
OperatingTemp	Not specified (platform dependent)
PowerConsumption	Backplane passive distribution, not separately rated
Slot Capacity	6 slots
Mounting Method	Mounting plate, screw-fixed
Application Scope	Local I/O, Remote I/O, Distributed I/O modules

Schneider Electric Backplane Bus & PLC Interconnect Characteristics

The Modicon Quantum backplane architecture utilizes deterministic rack-level signal routing across its internal bus structure, enabling synchronized module-to-module communication between CPU, I/O, and communication modules. In Schneider Electric PLC systems, backplane communication timing is aligned with scan-cycle execution behavior and firmware-level module recognition logic, supporting deterministic data exchange between rack-resident hardware elements. Firmware compatibility across Quantum platform revisions governs module initialization sequencing and backplane address mapping consistency.

Frequently Asked Questions

Q: Does the 140XBP00600 support hot-swap module insertion?
A: Hot-swap behavior is dependent on the Modicon Quantum rack configuration and CPU firmware. Backplane electrical continuity is maintained at slot level, but safe insertion/removal is governed by system power state and module type.

Q: What is the electrical function of the backplane in this model?
A: The backplane provides passive distribution of power rails and digital communication pathways between installed Quantum modules, without active signal conditioning.

Q: Is slot addressing fixed or configurable?
A: Slot addressing is physically defined by rack position and interpreted by the CPU during initialization through backplane detection logic.

Field Installation Guidelines

Install the 140XBP00600 on a rigid mounting plate using specified screw fixation points. Ensure chassis grounding is bonded to the cabinet earth reference with low impedance connection. Maintain separation between backplane wiring area and high-noise power conductors. Module insertion must be aligned perpendicular to the backplane connectors to prevent pin deformation. Verify rack alignment before tightening mechanical fasteners to avoid backplane stress distortion.

Specifications

• Brand: Schneider Electric

Advantages

• High reliability in industrial environments
• Supports continuous operation
• Compatible with major PLC/DCS systems