Description

GE IS210SAMBH2AA Mark VI Servo Amplifier Module

The GE IS210SAMBH2AA, also cataloged as the IS210SAMB Servo Amplifier Module, operates as a dedicated hardware component for hydraulic actuator current control within the GE Speedtronic Mark VI turbine control system. The module converts digital commands into proportional servo valve drive current with LVDT feedback processing.

Hardware Specifications

Parameter	Specification
Model	IS210SAMBH2AA
Brand	GE
Origin	United States
Weight	0.35 kg
Operating Temp	-30 to +65 deg C
Power Consumption	Supplied by +28 VDC nominal input
Product Type	Servo Amplifier Modules
Function	Servo amplifier for hydraulic actuators
Inputs	LVDT feedback signals, up to 2 channels
Outputs	+/-200 mA current drive for servo valves
Resolution	16-bit digital-to-analog conversion
Accuracy	+/-0.1% of full scale
Communication Interface	Mark VI controller backplane interface
Mounting	Rack mount, Mark VI chassis compatible
PCB Protection	Conformal coating

Deterministic Servo Control and Actuator Feedback Processing

The IS210SAMBH2AA applies GE Mark VI industrial control architecture for closed-loop hydraulic actuator control. The module receives digital control signals from the controller, converts them into proportional current outputs, and drives servo valves connected to turbine actuators.

The Mark VI platform supports deterministic controller communication and I/O density scaling through modular hardware structures. The servo amplifier module processes LVDT feedback signals to maintain actuator position control loops. Firmware flash compatibility must correspond with the installed Mark VI controller hardware revision and system configuration.

Frequently Asked Questions

Q: What type of actuator interface does the IS210SAMBH2AA provide?
A: The module provides proportional current drive outputs for hydraulic servo valves, with outputs rated at +/-200 mA.

Q: How does the module process valve position feedback?
A: The IS210SAMBH2AA accepts LVDT feedback signals and integrates them into closed-loop actuator control functions.

Q: Is the module compatible with redundant Mark VI configurations?
A: The module supports Mark VI system architectures including simplex and TMR (Triple Modular Redundancy) configurations.

Field Installation Guidelines

Install the IS210SAMBH2AA in the assigned Mark VI rack position and verify proper mechanical seating with the chassis backplane connector.

Check servo valve wiring polarity, LVDT feedback connections, and actuator loop configuration before system startup. Keep feedback and current drive wiring separated from high-voltage switching circuits to reduce electrical interference. Use shielded cables where required and terminate cable shields according to site grounding practices.

Inspect rack mounting, backplane engagement, and grounding continuity before applying operating power.

Specifications

• Dimensions: 177.8 mm × 330.2 mm × 20.3 mm
• Brand: GE

Advantages

• High reliability in industrial environments
• Supports continuous operation
• Compatible with major PLC/DCS systems