GE IS210MACCH2AFG Multi-Application Converter Controller Module The GE IS210MACCH2AFG, also cataloged as the IS210MACCH2AFG Multi-Application Converter Controller Module, operates as a dedicated hardware...
Read more
Available on working days between 9:00 am to 6:00 pm
Email us: sales2@industriaxplc.com
Available 24/7 for inquiries and support
Description
GE IS210MACCH2AFG Multi-Application Converter Controller Module
The GE IS210MACCH2AFG, also cataloged as the IS210MACCH2AFG Multi-Application Converter Controller Module, operates as a dedicated hardware component for real-time turbine signal processing and closed-loop control within GE Speedtronic Mark VI/Mark VIe control platforms.
Hardware Specifications
Parameter
Specification
Model
IS210MACCH2AFG
Brand
GE
Origin
United States
Weight
0.59 kg
Dimensions
283 mm x 182 mm x 52 mm
Operating Temp
-40 deg C to +70 deg C
Power Consumption
Max. 12 W
Processor
32-bit High-Speed RISC CPU
Memory
16 MB Flash / 8 MB SRAM
Supply Voltage
24 VDC (18-30 VDC)
Analog Input
16-channel isolated AI, 4-20 mA / 0-10 V
Analog Output
8-channel AO
Digital Input
32-channel isolated DI
Digital Output
16-channel relay DO
Communication Ports
2 x 10/100 Base-T Ethernet RJ45, 2 x RS-485
Supported Protocols
Modbus TCP/RTU, Profibus DP, GE Ethernet Global Data (EGD)
Isolation Voltage
1500 VAC channel-to-channel and channel-to-ground
Mounting Type
Standard 6U rack-mount
Certifications
CE, UL 508, ATEX Category 3
Profinet / EtherNet/IP Deterministic Network and I/O Processing
The IS210MACCH2AFG integrates a 32-bit RISC processor for execution of turbine control algorithms, signal conversion, and communication handling. The module processes isolated analog and digital channels while maintaining electrical separation between field wiring and controller circuits. Dual Ethernet ports and RS-485 interfaces provide communication paths for Mark VI/Mark VIe system integration using Ethernet Global Data, Modbus, and Profibus protocols.
The module architecture supports industrial control requirements through high I/O density scaling, allowing analog acquisition, relay output execution, and serial communication functions within a single rack-mounted controller assembly. Firmware flash memory supports application software storage and compatibility management for Speedtronic control configurations.
Frequently Asked Questions (FAQ)
Q: What type of field signals can the IS210MACCH2AFG process? A: The module supports isolated analog inputs including 4-20 mA and 0-10 V signals, isolated digital inputs, analog outputs, and relay digital outputs for turbine control interfaces.
Q: What communication interfaces are available on the IS210MACCH2AFG? A: The module provides two 10/100 Base-T Ethernet RJ45 ports and two RS-485 ports supporting Modbus TCP/RTU, Profibus DP, and GE Ethernet Global Data communication.
Q: What installation limitation applies to this module? A: The module must be installed in a compatible GE Speedtronic Mark VI/Mark VIe rack environment with correct backplane connection and firmware compatibility.
Field Installation Guidelines
Install the IS210MACCH2AFG in the designated GE Speedtronic Mark VI/Mark VIe rack position and verify mechanical alignment before inserting the module into the backplane interface.
Use shielded signal cables for analog field connections and terminate cable shields according to the grounding practices defined for the control cabinet. Separate low-level analog signal wiring from high-current power cables and switching circuits to reduce electrical interference.
Verify 24 VDC supply polarity before energizing the module. Confirm Ethernet and RS-485 wiring termination, communication addressing, and protocol configuration before placing the controller into operational service.
Avoid exposing the module to contamination, excessive vibration, or moisture beyond the specified environmental limits. Firmware compatibility should be checked before replacement or system modification.
