Honeywell TK-CRR014 Redundant Network Interface Module The Honeywell TK-CRR014, also cataloged as the TK-CRR014 Redundant Network Interface Module, operates as...
Read more
The Honeywell TK-CRR014, also cataloged as the TK-CRR014 Redundant Network Interface Module, operates as a dedicated hardware component for redundant communication interface processing within Honeywell Experion PKS control network platforms.
Hardware Specifications
Parameter
Specification
Model
TK-CRR014
Brand
Honeywell
Product Type
Redundant Network Interface Module
Origin
USA
Weight
Approx. 1.5 kg
Dimensions
100 mm x 180 mm x 80 mm
Operating Temp
Not specified
Power Consumption
Not specified
Communication Interfaces
Industrial network communication interfaces
Channel Capacity
Up to 16 process channels
Data Acquisition Rate
Up to 100 kHz
Resolution
16-bit
Accuracy
+/- 0.02%
Input Types
Analog, Digital, Thermocouple, RTD
Programming Standard
IEC 61131-3
Shock Resistance
30 g
Vibration Resistance
10 g
Protection Rating
IP67 housing
Process Control Interface and Signal Isolation Features
The Honeywell TK-CRR014 module is configured for process control communication and field signal acquisition functions within Experion PKS architectures. The module supports multi-channel signal handling for analog and discrete process inputs.
The hardware design supports channel-to-channel isolation principles required for industrial measurement systems. Moreover, the module architecture allows integration with process instruments using standard signal conditioning methods, including 4-20 mA HART loop protocol applications where system configuration supports compatible interfaces.
The module can process temperature-related inputs including thermocouple and RTD signals. Therefore, installation configurations requiring cold junction compensation (CJC) functions must verify compatibility with the connected I/O subsystem and field termination hardware.
Frequently Asked Questions
Q: Does the TK-CRR014 support redundant network operation? A: The module is designed as a redundant network interface component. Redundant configuration behavior depends on the installed Honeywell control platform and system architecture.
Q: What field signal types can be connected through the TK-CRR014? A: The module specification supports analog, digital, thermocouple, and RTD input signal categories. Signal wiring must follow the applicable Honeywell system installation requirements.
Q: Can the module operate independently without a Honeywell control chassis? A: The TK-CRR014 requires integration with the compatible Honeywell control system hardware and communication infrastructure for operation.
Field Installation Guidelines
Install the TK-CRR014 module inside the designated Honeywell control chassis or approved enclosure. Verify mechanical mounting alignment before applying power.
Use shielded field wiring for analog and temperature signal connections where required by the process instrumentation design. Connect cable shields according to site grounding standards to reduce electrical interference.
Separate low-level analog signal cables from high-voltage power wiring and switching circuits. Confirm connector seating, network cable routing, and module identification before system commissioning.
Check firmware compatibility and controller configuration parameters before replacing or adding the module into an operating control system.
