Description

Honeywell CC-HCN911 Series C Control Module

The Honeywell CC-HCN911 51307206-175, also cataloged as the 51307206-175 Series C Control Module, operates as a dedicated hardware component for control signal processing and module-level execution within Honeywell Series C control system platforms.

Hardware Specifications

Parameter	Specification
Model	CC-HCN911 51307206-175
Brand	Honeywell
Product Type	Series C Control Module
Origin	USA
Weight	0.44 kg
Dimensions	6.1 x 16.2 x 14.6 cm
Operating Temp	-20 deg C to +70 deg C
Power Consumption	10 W output power
Operating Voltage	24 VDC
Input Current	1.5 A
Output Frequency	1 kHz
Humidity Range	5% to 95% non-condensing
Tariff Code	8537101190

HART Loop and DCS Signal Interface Characteristics

The Honeywell CC-HCN911 Series C Control Module is designed for integration within Honeywell process control architectures. The module operates with a 24 VDC supply and provides hardware-level control execution functions for Series C systems.

For Honeywell DCS environments, module integration principles include compatibility with process instrumentation signal architectures such as 4-20 mA HART loop protocol, FOUNDATION Fieldbus / Profibus PA connectivity, and channel-to-channel isolation requirements where applicable. These interface characteristics support structured field signal acquisition, conditioning, and controller communication within distributed control configurations.

Frequently Asked Questions

Q: What is the operating power requirement of the CC-HCN911 module?
A: The module operates with a 24 VDC supply input and has an input current specification of 1.5 A. The listed output power rating is 10 W.

Q: Can the CC-HCN911 be installed in environments with high temperature variation?
A: The specified operating temperature range is -20 deg C to +70 deg C. Installation should maintain proper enclosure protection and environmental control according to system requirements.

Q: What installation considerations apply for this Series C Control Module?
A: Installation should follow Honeywell Series C system hardware guidelines, including correct backplane connection, proper grounding, signal cable separation, and compliance with applicable cabinet wiring practices.

Field Installation Guidelines

• Install the module in the designated Honeywell Series C hardware rack or control assembly using the specified mounting interface.
• Verify that the 24 VDC power supply wiring polarity and grounding arrangement comply with system requirements before energizing the module.
• Maintain separation between power wiring and low-level instrumentation signal cables to reduce electrical interference.
• Use appropriate shield termination methods for connected field signal wiring where required by the control system design.
• Confirm backplane connections are fully seated before system startup and perform module status verification through the host control environment.

Specifications

• Brand: Honeywell

Advantages

• High reliability in industrial environments
• Supports continuous operation
• Compatible with major PLC/DCS systems