Honeywell 900U01-0100 Universal Input/Output Module Configured for configurable signal acquisition and output execution in the Honeywell ControlEdge Modular Controller system,...
Read more
Configured for configurable signal acquisition and output execution in the Honeywell ControlEdge Modular Controller system, the Honeywell 900U01-0100 (900U01-0100 Universal Input/Output Module) provides direct physical and electrical I/O processing through software-defined channels.
Hardware Specifications
Parameter
Specification
Model
900U01-0100
Brand
Honeywell
Origin
United States
Module Type
Universal Input/Output (UIO) Module
System Platform
Honeywell ControlEdge Modular Controller / PLC Systems
Configurable Channels
Software-configurable as Analog Input (AI), Analog Output (AO), Digital Input (DI), or Digital Output (DO)
Weight
Approx. 180 g
Dimensions
Not specified in available technical documentation
Operating Temp
0 deg C to 60 deg C
Power Consumption
380 mA maximum at 5 VDC internal supply
External Power Supply
24 VDC
Digital Output Rating
0.5 A maximum per output channel in DO mode
Module Total Output Load
4.2 A maximum per module
Certifications
CE, UL / cUL, hazardous location ratings where applicable
Process Control Signal Interface Characteristics
The Honeywell 900U01-0100 integrates multiple signal types within a single I/O hardware module. Each channel can be configured through controller software according to the connected field device requirements.
The module supports process control signal handling with configurable analog and digital functions. Therefore, users can assign channels for measurement, status monitoring, or actuator command output without changing the physical module.
For process instrumentation applications, the module architecture supports typical DCS signal requirements, including 4-20 mA current loop interfaces, discrete contact monitoring, and output control functions when configured with compatible field devices.
The module design also supports channel-to-channel isolation considerations required for mixed signal environments. Proper field wiring separation and grounding practices help maintain signal integrity during operation.
Frequently Asked Questions
Q: Can the 900U01-0100 channel type be changed by hardware replacement? A: No. The channel function is software-configured as AI, AO, DI, or DO. The physical module remains installed while the controller configuration defines the channel operation.
Q: Does the module require external field power? A: Yes. The module accepts a 24 VDC external supply for field-side output operation and connected device requirements.
Q: Can the module operate outside the ControlEdge Modular Controller platform? A: No. The 900U01-0100 is designed for installation within compatible Honeywell ControlEdge modular racks and controller systems.
Field Installation Guidelines
Install the module only in a compatible Honeywell ControlEdge Modular Controller rack position.
Verify backplane connection alignment before inserting the module into the rack.
Use shielded field wiring for analog signal connections where electromagnetic interference may affect measurement accuracy.
Connect cable shields according to the plant grounding standard and avoid multiple grounding points on signal shields.
Separate analog signal cables from high-current power cables and switching output wiring.
Confirm the configured channel type matches the connected field device before commissioning.
Check 24 VDC field supply polarity and voltage stability before enabling digital output functions.
Follow Honeywell installation manuals for rack grounding, environmental requirements, and controller configuration procedures.
