Description

Honeywell 900P01-0201 ControlEdge HC900 Power Supply Module

Configured for rack power conversion in the Honeywell ControlEdge HC900 system, the Honeywell 900P01-0201 (900P01-0201 Power Supply Module) provides regulated DC outputs for controller chassis and I/O hardware operation.

Hardware Specifications

Parameter	Specification
Model	900P01-0201
Brand	Honeywell
Product Series	ControlEdge HC900 Platform
Module Type	60 W Power Supply Module
Origin	USA
Associated Part Number	51450991-002
Input Voltage Range	120 / 240 VAC
Output Voltages	5 VDC and 24 VDC regulated outputs
Power Consumption	60 W output capacity
Weight	Approx. 360 g to 425 g
Dimensions	Height: 137 mm; Width: 35.6 mm
Operating Temp	Not specified in provided data
Mounting Type	ControlEdge HC900 rack-mounted installation
Rack Interface	Direct chassis/backplane connection

Honeywell Process Control Power Architecture

The Honeywell 900P01-0201 provides DC power conversion for ControlEdge HC900 controller racks. It supplies regulated 5 VDC and 24 VDC outputs for internal rack loads, including controller modules, I/O modules, and communication hardware.

The module connects directly to the HC900 chassis backplane. Therefore, it distributes operating power through the rack infrastructure without requiring external DC wiring for each individual module.

For Honeywell process control configurations, the power module design supports stable electrical distribution for I/O systems using channel isolation, field signal conditioning, and industrial communication interfaces. The module operates as a power component within the overall DCS and controller architecture rather than as a signal processing device.

Frequently Asked Questions

Q: Does the 900P01-0201 provide field signal input or output functions?
A: No. The 900P01-0201 is a power supply module. It provides regulated DC power outputs for controller rack hardware and does not process field input or output signals.

Q: Can the 900P01-0201 connect directly to the ControlEdge HC900 backplane?
A: Yes. The module uses rack-mounted installation and connects through the HC900 chassis/backplane interface for internal power distribution.

Q: What output voltages does the 900P01-0201 generate?
A: The module provides regulated 5 VDC and 24 VDC outputs for ControlEdge HC900 rack power requirements.

Field Installation Guidelines

Install the 900P01-0201 module only in the designated ControlEdge HC900 rack position. Verify that the rack power interface is clean and free from mechanical damage before insertion.

Ensure that the AC supply wiring follows the approved electrical installation practices for the controller cabinet. Separate power wiring from low-level analog signal cables to reduce electrical interference.

Connect protective grounding according to cabinet grounding requirements. Maintain proper cable routing and avoid placing high-voltage conductors directly alongside communication or instrument signal wiring.

Before energizing the system, confirm the input voltage range matches the installed AC supply source. Check that the connected rack load remains within the module power capacity.

Specifications

• Brand: Honeywell

Advantages

• High reliability in industrial environments
• Supports continuous operation
• Compatible with major PLC/DCS systems