Description
Overview
The IC695PNS001CA‑ABAH PROFINET Scanner Module is a high‑speed network interface designed for GE’s PACSystems RX3i automation platform. It enables remote I/O racks—whether Series 90‑30 or RX3i—to communicate with a PROFINET I/O Controller, ensuring deterministic data exchange across industrial Ethernet networks. The module continuously scans its connected rack and publishes I/O data at user‑defined update rates, supporting real‑time control in demanding applications.
Functional Characteristics
Equipped with four integrated Ethernet switch ports, the module supports copper and fiber‑optic media at 10/100/1000 Mbps. This flexibility allows deployment in a wide range of network topologies, including line, star, and PROFINET MRP (Media Redundancy Protocol) rings. A dedicated front‑panel RJ‑45 port simplifies firmware updates, while SD card support enables rapid module replacement by automatically restoring device naming and configuration.
The IC695PNS001CA‑ABAH maintains safe I/O behavior during communication interruptions by applying predefined fail‑safe states. It is fully supported by Proficy Machine Edition (PME), allowing straightforward configuration of remote I/O modules and system diagnostics.
Advanced Features
While the PNS101 variant adds Sequence‑of‑Events (SOE) recording with IRIG‑B time synchronization, the IC695PNS001CA‑ABAH focuses on high‑performance PROFINET scanning for standard automation tasks. Its robust design ensures stable operation in environments with electrical noise, vibration, or temperature fluctuations.
Mechanical and Environmental Details
-
Dimensions: 7 × 13.3 × 13.5 cm
-
Weight: 0.52 kg
-
Designed for RX3i backplanes
-
Industrial‑grade Ethernet ports with integrated switching
-
SD card slot for configuration portability
Performance Specifications
-
Network speed: 10/100/1000 Mbps
-
Supported media: Copper and fiber optic
-
Topologies: Daisy‑chain, star, MRP ring
-
Configuration software: Proficy Machine Edition
-
Fail‑safe I/O handling during network loss
-
Remote I/O compatibility: Series 90‑30 and RX3i
Applications
-
Distributed I/O systems
-
High‑speed PROFINET networks
-
Machine automation and motion control
-
Process control and DCS architectures
-
Redundant or ring‑based industrial Ethernet systems
Technical Specifications Table
| Parameter |
Specification |
| Model |
IC695PNS001CA‑ABAH |
| Product Type |
PROFINET Scanner Module |
| Series |
PACSystems RX3i |
| Ethernet Ports |
4 switched ports (10/100/1000 Mbps) |
| Supported Media |
Copper, fiber optic |
| Network Topologies |
Daisy‑chain, star, MRP |
| Configuration |
Proficy Machine Edition |
| SD Card Support |
Yes |
| Dimensions |
7 × 13.3 × 13.5 cm |
| Weight |
0.52 kg |
| Origin |
USA |
| Status |
Active |
FAQ
Q: Does this module support SOE time stamping A: No. SOE with IRIG‑B synchronization is available only on the PNS101 variant.
Q: Can the module be used with legacy Series 90‑30 I/O A: Yes. It supports both Series 90‑30 and RX3i remote I/O racks.
Q: What happens if the PROFINET network goes down A: The module applies predefined fail‑safe output states until communication is restored.
