Description

GE IS210BPPCH1AC Mark VIe VMEbus Power Supply Board

The GE IS210BPPCH1AC, also cataloged as the IS210BPPCH1AC VMEbus Power Supply Board, operates as a dedicated hardware component for regulated DC power distribution within the GE Mark VIe Speedtronic control system backplane. The board converts 125 VDC input power into multiple DC output rails for processor, I/O, and communication circuits.

Hardware Specifications

Parameter	Specification
Model	IS210BPPCH1AC
Brand	GE (General Electric)
Origin	United States
Weight	0.3 kg
Power Consumption	Input current 3.2 A typical at full load
Series	Mark VIe Speedtronic
Product Type	VMEbus Power Supply Board
Input Voltage	125 VDC nominal, 100-150 VDC operating range
Output Voltage Rails	5 VDC, +12 VDC, -12 VDC, 24 VDC
Logic Output	5 VDC at 20 A continuous, 25 A peak
Auxiliary Outputs	+12 VDC and -12 VDC at 2.5 A continuous each
Field I/O Output	24 VDC at 3.5 A continuous, 4.5 A peak
Efficiency	90% typical
Output Ripple	Less than 50 mV peak-to-peak at full load
Isolation	2,500 VDC input-to-output
Protection Functions	Overvoltage clamps and foldback current limiting with auto-recovery
Diagnostics	Voltage, current, and temperature monitoring

Mark VIe Power Distribution and Backplane Interface

The IS210BPPCH1AC provides regulated DC rails for GE Mark VIe controller assemblies through the VMEbus power architecture. The board supports Simplex, Dual, and TMR configurations by supplying power paths for processor boards, I/O modules, and communication interfaces.

The power module incorporates monitoring circuits for voltage, current, and temperature conditions. Output protection includes voltage clamp thresholds of 5.5 V, 13.5 V, and 28 V for corresponding power rails. Foldback current limiting provides automatic recovery after overload conditions.

The AC suffix version includes enhanced conformal coating with thicker urethane/acrylic protection layers for resistance against moisture, chemical exposure, and airborne contaminants.

Firmware Flash Compatibility and System Integration

The IS210BPPCH1AC is integrated into Mark VIe Speedtronic hardware assemblies through the VMEbus control platform. Its power regulation characteristics support deterministic operation of PLC/DCS control modules by maintaining stable voltage supply for digital processing, I/O acquisition, and communication functions.

The module architecture supports GE industrial control system configurations requiring coordinated power distribution across redundant controller arrangements. The board operates as a hardware-level power interface and does not execute application firmware functions.

Frequently Asked Questions

Q: What DC input range does the IS210BPPCH1AC support?
A: The board accepts a nominal 125 VDC input with an operating range of 100-150 VDC.

Q: Which output voltages are generated by this power supply board?
A: The module provides 5 VDC logic power, +12 VDC and -12 VDC auxiliary rails, and a 24 VDC field I/O supply output.

Q: Does the IS210BPPCH1AC support redundant control configurations?
A: The board supports Simplex, Dual, and TMR Mark VIe system configurations when installed within compatible system architectures.

Field Installation Guidelines

Install the IS210BPPCH1AC only in compatible GE Mark VIe VMEbus rack assemblies. Verify backplane connector alignment before insertion and ensure that mechanical guides are correctly engaged.

Use appropriate DC power wiring practices, including separated routing between power conductors and low-level signal cables. Maintain proper grounding of rack structures and connect shielding according to the system cabinet grounding design.

Before energizing the module, verify input polarity, DC supply range, and load distribution across connected processor, I/O, and communication modules. Inspect connectors and conformal coating surfaces for contamination or physical damage during maintenance activities.

Specifications

• Brand: General Electric

Advantages

• High reliability in industrial environments
• Supports continuous operation
• Compatible with major PLC/DCS systems