Description

GE IS200TRPGS1B Trip Board Module

The GE IS200TRPGS1B, also cataloged as the IS200TRPGS1B Trip Board Module, operates as a dedicated hardware component for emergency trip relay execution within the GE Mark VIe Speedtronic control system. The module interfaces turbine controllers with trip solenoids, breakers, and protective relay circuits through discrete relay outputs.

Hardware Specifications

Parameter	Specification
Model	IS200TRPGS1B
Brand	GE
Origin	United States
Weight	0.5 kg
Operating Temp	-30 to 65 deg C
Product Type	Turbine Primary Trip Terminal Boards
Series	Mark VI / Mark VIe Speedtronic Control System
Relay Outputs	Multiple Form-C relays for trip solenoids and breakers
Output Ratings	250 VAC @ 6 A; 30 VDC @ 6 A
Coil Drive Voltage	24 VDC nominal, 18-32 VDC range
Isolation	Optical/electrical isolation between channels and ground
Suppression	MOV and diode transient suppression networks
Diagnostics	Relay health monitoring and fault feedback
Connectors	Barrier terminal strips and controller backplane connectors
Mounting	Standard Mark VI rack slot
Humidity Tolerance	5%-95% non-condensing
Storage Temperature	-40 to 85 deg C

Industrial Control and Protection Interface Characteristics

The IS200TRPGS1B provides relay-based trip signal execution within GE Mark VIe turbine control architectures. The module receives protective commands from the controller and drives external trip devices through Form-C relay outputs.

The terminal board applies industrial control design methods including I/O density scaling for multiple trip circuits, backplane bus communication compatibility with Mark VIe controller assemblies, and firmware flash compatibility within supported GE control configurations. Electrical isolation and transient suppression networks protect relay channels during switching operations.

The module supports deterministic emergency shutdown execution by maintaining defined relay states for turbine protection sequences.

Frequently Asked Questions

Q: What type of outputs are provided by the IS200TRPGS1B?
A: The module provides multiple Form-C relay outputs for interfacing with trip solenoids, breakers, and protective relay circuits.

Q: What transient protection components are included on the trip board?
A: The IS200TRPGS1B includes MOV and diode suppression networks for reducing transient effects generated during relay switching.

Q: How is the module connected to the Mark VIe controller system?
A: The board connects through controller backplane interfaces and field wiring terminal strips for external trip circuit connections.

Field Installation Guidelines

Install the IS200TRPGS1B in the assigned GE Mark VIe rack location and confirm proper backplane engagement before connecting external trip wiring.

Route relay output wiring separately from high-energy power conductors to reduce electromagnetic interference. Use appropriate grounding and shielding methods for field cables according to cabinet design requirements.

Verify relay contact assignments, coil drive voltage connections, and external trip device wiring before energizing the protection circuit. Confirm diagnostic feedback signals through the Mark VIe controller interface after installation.

Specifications

• Brand: General Electric

Advantages

• High reliability in industrial environments
• Supports continuous operation
• Compatible with major PLC/DCS systems