Description

GE IS200CSLAH1A Compact PCI Serial Link Expansion Board

Configured for high-speed serial communication in the GE EX2100e Excitation Control System, the GE IS200CSLAH1A (IS200CSLA Compact PCI Serial Link Expansion Board) provides direct fiber-optic data exchange between processor assemblies and peripheral modules through deterministic serial link channels.

Hardware Specifications

Parameter	Specification
Model	IS200CSLAH1A
Brand	GE Industrial Systems
Origin	USA
Weight	0.95 kg
Dimensions	160 mm x 100 mm x 20 mm
Operating Temp	-30 to +65 deg C
Power Consumption	5 VDC logic supply, 24 VDC field supply
Product Type	Compact PCI Serial Link Expansion Board
Series	EX2100e Excitation Control System
Functional Acronym	CSLA
Communication Interface	High-Speed Serial Link protocol
Optical Transceivers	10 x HFBR-5961xxZ fiber-optic transceivers
PCB Technology	Surface-mount components
PCB Protection	H1 style conformal coating
Isolation	2500 Vrms optocoupler isolation
Connector Interface	Compact PCI / VME 96-pin connector
Response Time	Approx. 1 us input-to-output
Maximum Frequency	Up to 500 kHz

Deterministic Serial Communication and Industrial Control Interface

The IS200CSLAH1A uses fiber-optic serial link channels for processor-to-peripheral communication inside the EX2100e platform. The ten HFBR-5961xxZ optical transceivers support high-speed data exchange with electrical isolation between communication circuits and field-related interfaces. The conformal-coated PCB structure provides protection for surface-mounted components against industrial contaminants.

GE EX2100e control applications require deterministic network behavior, and this board supports high-speed serial link timing through controlled communication paths. The hardware design incorporates optocoupler isolation and separate logic and field power domains to maintain electrical separation between control electronics and connected equipment.

Frequently Asked Questions

Q: What communication method does the IS200CSLAH1A use?
A: The board uses a High-Speed Serial Link protocol through ten HFBR-5961xxZ fiber-optic transceivers for processor and peripheral module communication.

Q: Does the IS200CSLAH1A provide electrical isolation?
A: Yes. The board uses optocoupler-based isolation rated at 2500 Vrms between designated logic and field interface circuits.

Q: What power supplies are required for operation?
A: The board requires a 5 VDC logic supply from the backplane and a separate 24 VDC field supply connection.

Field Installation Guidelines

Install the IS200CSLAH1A into the designated EX2100e chassis slot using the chassis guide rails and secure the front panel mounting hardware before system energization.

Verify that the 5 VDC backplane logic supply and 24 VDC field supply wiring are correctly separated according to system installation requirements. Fiber-optic cables should be routed separately from high-current power conductors to reduce mechanical stress and prevent cable damage.

Maintain proper connector alignment during insertion and removal. Inspect optical interfaces for contamination before connection, and ensure cable shielding and grounding practices follow the control system installation standards.

Specifications

• Brand: General Electric

Advantages

• High reliability in industrial environments
• Supports continuous operation
• Compatible with major PLC/DCS systems