Description

GE IS200AEPBH1B Analog Excitation Power Board

Configured for excitation power signal processing in GE Mark VIe control systems, the GE IS200AEPBH1B (IS200AEPB Analog Excitation Power Board) provides direct physical/electrical execution for voltage and current regulation, feedback processing, and control communication within GE industrial control platforms.

Suffix Breakdown & Model Matrix

Suffix	Description
IS200	GE Mark VIe series hardware identification
AEPB	Analog Excitation Power Board functional acronym
H1	Hardware revision identifier
B	Functional revision level

Hardware Specifications

Parameter	Specification
Model	IS200AEPBH1B
Brand	GE Energy
Origin	United States
Weight	0.5 kg
Operating Temp	-40 to +70 deg C
Power Consumption	24 VDC input supply
Functional Description	AEPB Module Board / Analog Excitation Power Board
Input Voltage	24 VDC
Output Voltage	0-500 VDC
Output Current	0-100 A
Communication Interfaces	RS232, RS485, Ethernet, Modbus TCP/IP
PCB Coating	Conformal coating
Functional Revision	B
Connector Interface	Board-level industrial control connectors

EtherNet and Firmware Flash Compatibility Characteristics

The IS200AEPBH1B is an analog excitation control board within the GE Mark VIe hardware platform. The module performs analog power signal processing, output regulation, and communication exchange through RS232, RS485, Ethernet, and Modbus TCP/IP interfaces.

The board architecture supports industrial control I/O density scaling through integrated analog signal handling and communication channels. Firmware flash compatibility within the supported GE control environment allows configuration updates and application parameter management.

The conformal-coated PCB construction provides additional protection against environmental contamination during operation. The board design incorporates industrial electrical interfaces for excitation-related voltage and current control functions.

Frequently Asked Questions

Q: What is the input power requirement of the IS200AEPBH1B?
A: The board operates from a 24 VDC input supply.

Q: Which communication interfaces are supported by the IS200AEPBH1B?
A: The module supports RS232, RS485, Ethernet, and Modbus TCP/IP communication interfaces.

Q: What type of PCB protection is applied to this board?
A: The PCB uses conformal coating for protection of electronic components against environmental exposure.

Field Installation Guidelines

Install the IS200AEPBH1B in the designated GE Mark VIe control system assembly. Verify connector alignment, mechanical mounting, and power isolation before installation or replacement.

Route communication and signal wiring separately from high-voltage conductors. Use shielded cables where required, and terminate cable shields according to the system grounding design to reduce electromagnetic interference.

Confirm voltage and current configuration parameters before energizing the board. Verify RS232, RS485, Ethernet, and Modbus TCP/IP communication settings during commissioning.

Specifications

• Brand: General Electric

Advantages

• High reliability in industrial environments
• Supports continuous operation
• Compatible with major PLC/DCS systems