Available on working days between 9:00 am to 6:00 pm
Email us: sales2@industriaxplc.com
Available 24/7 for inquiries and support
Description
Yokogawa ADC32-S1 Contact Output Module
The Yokogawa ADC32-S1, also cataloged as the ADC32 Contact Output Module, operates as a dedicated hardware component for isolated relay switching across 32 channels within ProSafe-RS safety systems.
Hardware Specifications
Parameter
Specification
ModelBrand
Yokogawa ADC32-S1
Origin
Japan
Weight
0.5 kg
Dimensions
6.56 cm × 7.20 cm × 5.23 cm
OperatingTemp
-10 to +55 degC
HumidityRange
5% to 95% RH (Non-condensing)
NumberOfChannels
32 isolated outputs
OutputType
Relay contact (dry contact)
SwitchConfiguration
On/Off, Sink or Source capability
LEDStatusIndicators
Yes, per channel
WithstandingVoltage
500 VDC to 1500 VAC, 1 min
PowerConsumption
Per module nominal, refer to datasheet
SIS-Specific Signal Characteristics
The ADC32-S1 provides galvanic isolation for all 32 output channels, ensuring separation between field wiring and internal safety logic. Each channel supports positive contact feedback to confirm switching events, maintaining compliance with SIL-rated safety loops. Channel-to-channel isolation mitigates cross-talk, allowing simultaneous switching of multiple actuators without signal interference.
Frequently Asked Questions
Q: VnA: Can the ADC32-S1 outputs drive both sourcing and sinking devices? A: Yes, each channel is configurable to sink or source current according to connected actuator requirements, within the rated voltage/current limits.
Q: VnA: What is the maximum switching voltage and current per channel? A: Refer to the module datasheet; typical ratings support up to 24–30 VDC for safe loop operation. Exceeding rated values may compromise isolation.
Q: VnA: Is the ADC32-S1 suitable for hot-swapping in a live ProSafe-RS rack? A: No. Module insertion or removal must occur with the backplane de-energized to prevent logic or relay damage.
Field Installation Guidelines
Mount the module into standard Yokogawa FIO backplane slots with firm mechanical engagement.
Ensure all output field wiring is shielded and terminated with proper grounding to reduce EMI.
Keep high-current and signal wiring physically separated to prevent inductive coupling.
Confirm backplane voltage is removed before module installation or removal.
Verify channel LED indicators illuminate correctly after installation to confirm electrical continuity.
Avoid exceeding environmental limits of temperature and humidity; maintain non-condensing conditions.
