Description
Overview
The 177230-01-01-CN seismic transmitter from Bently Nevada is engineered for machinery vibration monitoring where rugged construction and stable output are essential. Built with a corrosion‑resistant 316L stainless steel housing and a MIL‑C‑5015 three‑pin connector, the transmitter integrates directly with PLC, DCS, and SCADA platforms for continuous condition monitoring.
Technical Specifications
| Parameter |
Value |
| Model Number |
177230-01-01-CN |
| Product Type |
Seismic Transmitter |
| Series |
3300 XL |
| Manufacturer |
Bently Nevada |
| Condition |
Brand New |
| Measurement Range |
0–25.4 mm/s (RMS) |
| Frequency Response |
10 Hz to 1 kHz |
| Output Signal |
4–20 mA loop‑powered |
| Housing Material |
316L stainless steel |
| Connector Type |
3‑pin MIL‑C‑5015 |
| Operating Temperature |
-51°C to +177°C |
| Humidity Tolerance |
Up to 100% RH |
| Mounting Thread |
1/4‑28 UNF |
| Dimensions |
1.8 × 1.6 × 123 cm |
| Weight |
0.06 kg |
| Origin |
USA |
| HS Code |
8537101190 |
| Availability |
In Stock |
| MOQ |
1 |
Key Features
-
Designed for long‑term seismic vibration monitoring in harsh industrial environments.
-
Wide operating temperature range suitable for extreme ambient conditions.
-
4–20 mA output simplifies integration with standard industrial control systems.
-
Self‑test functionality ensures continuous operational integrity.
-
Stainless steel enclosure provides resistance to corrosion and mechanical stress.
-
Stable, repeatable vibration measurements support predictive maintenance programs.
Application Scenarios
-
Monitoring of low‑frequency vibration on pumps, fans, and motors
-
Machinery protection systems requiring loop‑powered seismic sensors
-
Environments with high humidity or temperature extremes
-
Facilities using PLC, DCS, or SCADA‑based condition monitoring
FAQ
Q: Can this transmitter be used outdoors? A: Yes. The stainless steel housing and wide environmental ratings allow reliable outdoor operation.
Q: Is the sensor compatible with standard 4–20 mA monitoring equipment? A: The 177230-01-01-CN is designed specifically for loop‑powered 4–20 mA systems.
Q: Does it require calibration with specific monitoring hardware? A: No. It outputs a standardized current signal compatible with most industrial monitoring platforms.
