Description

ABB TK854V030 Communication Interface Module

Configured for physical interface and system-level communication within an ABB industrial control architecture, the ABB TK854V030 (TK854V030 Communication Interface Module) provides hardware-level connectivity between the associated system components. The supplied data does not identify a specific protocol, electrical interface, or backplane specification.

Hardware Specifications

Parameter	Specification
Model	TK854V030
Brand	ABB
Product Type	Communication / Interface Module
Application	ABB industrial automation and control systems
System Compatibility	System-dependent; supplied data references Advant OCS, Freelance, and System 800xA environments
Communication Protocol	Not specified in supplied data
Electrical Interface	Not specified in supplied data
Operating Temp	0 deg C to +55 deg C
Storage Temp	-40 deg C to +70 deg C
Mounting Type	DIN rail or rack mounting, depending on associated housing
Protection Class	Typically IP20, according to supplied information
RoHS Status	Compliant with applicable environmental directives

ABB Industrial Control Interface Characteristics

The TK854V030 functions as a hardware interface component, so the associated system determines its actual communication path and electrical assignment. Therefore, installers should verify the compatible rack, terminal arrangement, and system documentation before energizing the module.

ABB control architectures may use dedicated backplane or system-bus communication between controllers, interface modules, and I/O assemblies. However, the supplied TK854V030 information does not define a specific bus speed, protocol, connector pinout, or firmware compatibility range. Consequently, these parameters should not be assumed from the model number alone.

For system integration, confirm the hardware revision and the target ABB platform. Then verify the mating connector, rack position, power source, and communication interface against the applicable ABB hardware documentation.

Frequently Asked Questions

Q: Does the supplied specification confirm a specific communication protocol for TK854V030?

A: No. The supplied information identifies the unit as a communication/interface module but does not specify a protocol or network standard.

Q: Can the TK854V030 be installed directly on a DIN rail?

A: The supplied information lists DIN-rail or rack mounting, depending on the associated housing or sub-rack design. The applicable mounting arrangement must therefore be confirmed from the system hardware documentation.

Q: What is the specified power consumption of TK854V030?

A: The supplied data does not provide a power-consumption value. The system-specific hardware manual should be used to determine the required supply and backplane load.

Field Installation Guidelines

1. Confirm the exact TK854V030 hardware revision before installation.
2. Verify the compatible ABB rack, mounting carrier, or DIN-rail assembly.
3. Isolate system power before connecting or removing the module.
4. Inspect connectors for contamination, mechanical damage, or bent contacts.
5. Route communication wiring separately from high-voltage and high-current conductors where practical.
6. Maintain appropriate cable shielding and connect shields according to the ABB system grounding scheme.
7. Avoid unnecessary cable loops and excessive mechanical stress at connectors.
8. Confirm terminal assignments and connector orientation from the applicable ABB installation manual.
9. Check the enclosure protection level when the module operates outside a controlled cabinet environment.
10. After installation, verify module seating, power status, communication status, and system diagnostics before placing the control system into service.

Specifications

• Brand: ABB

Advantages

• High reliability in industrial environments
• Supports continuous operation
• Compatible with major PLC/DCS systems