Yokogawa Electric provides advanced automation solutions for process control and safety. Its product range includes CENTUM VP DCS, ProSafe-RS safety systems, and spare parts. Yokogawa technology ensures reliable operation, long-term system support, and optimized performance across industries worldwide.
Yokogawa Electric
-
Yokogawa Digital Output Module ADV559-P00 Yokogawa Datasheet & Technical Manual
Yokogawa ADV559-P00 Digital Output Module Configured for discrete signal execution in CENTUM VP control environments, the Yokogawa ADV559-P00 (ADV559 Digital Output Module) provides direct physical/electrical execution. The module implements 32 independent transistor output channels with galvanic isolation, supporting external 24 VDC load switching for binary status control, pulse width modulation, and time-proportioning output logic. Channel behavior is software-configurable, with deterministic response suitable for sequence-driven control tasks and actuator interfacing. Suffix Breakdown & Model Matrix ADV559: 32-channel isolated digital output module series P00: Standard configuration, no explosion protection, no corrosive gas specification option Hardware Specifications Parameter Specification Model Brand Yokogawa ADV559-P00 Origin Japan OperatingTemp Not specified (industrial enclosure dependent) PowerConsumption 5 VDC, 570 mA (internal consumption) Channels 32 isolated transistor outputs Output Type Open-collector transistor switching Load Voltage 24 VDC external supply (field dependent) Contact Rating 30 VDC, 100 mA max per channel Response Time <= 16 ms (status output) Pulse Functions Pulse Width, Time Proportioning (8 ms to 7200 s) Backplane Interface CENTUM VP system rack via dedicated I/O bus Channel-to-Channel Isolation Architecture (Yokogawa DCS I/O Behavior) The ADV559-P00 implements channel-level electrical isolation across all 32 output points, preventing cross-channel backfeed during inductive load switching events. In Yokogawa CENTUM VP I/O architectures, this isolation strategy supports stable digital output integrity under mixed-load field wiring conditions, particularly when interfacing solenoid valves, relay coils, or discrete actuator inputs. Signal separation is maintained at transistor stage level rather than group isolation, reducing fault propagation across adjacent output points. Frequently Asked Questions Q: Can the ADV559-P00 outputs be used for inductive loads directly?A: Outputs are transistor-based and require external suppression (flyback diode or snubber) for inductive loads such as relays or solenoids. Q: Does the module support hot-swap replacement?A: Replacement is dependent on CENTUM VP rack configuration; field power isolation is required prior to module insertion or removal. Q: Are pulse width and time-proportioning outputs simultaneous per channel?A: Each channel is individually configurable, but operates in a single mode at any given time (status, PW, or TP). Field Installation Guidelines Use KS2 dedicated signal cable for connection to ST4 terminal boards only. Direct field wiring to module is not supported. Ensure external 24 VDC supply is properly fused and isolated from system backplane power. Maintain separation between output wiring and analog signal cabling to reduce switching noise coupling. Apply shield grounding at cabinet single-point earth reference only. Verify load polarity for transistor sinking configuration prior to energization.
$200.00 $100.00
-
Yokogawa ADV151-E50/D5A00 Yokogawa Digital Input Module | New & Original Stock
Yokogawa ADV151-E50/D5A00 Digital Input Module Configured for 32-channel isolated digital signal acquisition in CENTUM and compatible Yokogawa DCS environments, the Yokogawa ADV151-E50/D5A00 (ADV151 Digital Input Module) provides direct physical/electrical execution for 24 VDC field input processing with integrated SOE capture capability. Suffix Breakdown & Model Matrix Code Segment Description ADV151 32-channel digital input module -E With SOE (Sequence of Events) capture 0 Basic type /D5A00 With KS Cable Interface Adapter for 32-channel digital input connection Hardware Specifications Parameter Specification Model ADV151-E50/D5A00 Brand Yokogawa Origin Japan Product Type Digital Input Module Input Channels 32-channel isolated digital inputs Rated Input Voltage 24 VDC SOE Function Supported Isolation Channel isolation supported Interface Adapter KS Cable Interface Adapter Mounting Method Rack-mounted DCS module installation Weight 1.5 kg Channel Isolation and DCS Signal Integrity The ADV151 module implements isolated digital input processing for 24 VDC field status acquisition within Yokogawa distributed control architectures. Channel-to-channel isolation reduces propagation of transient electrical noise originating from relay panels, dry contact assemblies, and field switching devices connected through the KS cable interface adapter. The integrated SOE capture function allows timestamp-oriented event acquisition for discrete state transitions. This function is typically applied where sequence validation of breaker states, permissive logic, or interlock transitions must be retained within the DCS event history layer. Frequently Asked Questions Q: Does the ADV151-E50/D5A00 support Sequence of Events recording?A: Yes. The "-E" suffix designates SOE capture functionality for timestamped discrete input event monitoring. Q: What type of field signals are accepted by this module?A: The module is designed for 24 VDC isolated digital input signals across 32 independent channels. Q: What installation consideration applies to the KS cable interface adapter?A: The KS cable assembly should be routed separately from high-voltage motor and inverter cabling to minimize induced switching noise on digital input circuits. Field Installation Guidelines Before module insertion, verify rack slot assignment and I/O node compatibility against the controller configuration database. Ensure field power is isolated prior to terminal wiring or cable adapter replacement. Use shielded control cable where digital inputs are routed through high-noise electrical cabinets. Cable shield grounding should be terminated at one designated panel grounding point to avoid ground loop current circulation. Maintain separation between digital input wiring and high-current AC conductors. Avoid parallel cable routing adjacent to variable-frequency drive output cables or relay coil bundles. Inspect KS interface connector locking points after installation to prevent intermittent contact conditions caused by cabinet vibration or maintenance handling.
$200.00 $100.00
-
Yokogawa Yokogawa ADV551-P50/D5A00 Digital Output Modules
Yokogawa ADV551-P50/D5A00 Digital Output Modules Configured for 32-channel discrete signal execution in CENTUM-compatible DCS architectures, the Yokogawa ADV551-P50/D5A00 (ADV551 Digital Output Modules) provides direct current sink output handling for field-side status and pulse transmission circuits. The module integrates pulse width output capability together with a KS Cable Interface Adapter for 32-channel digital interfacing. Suffix Breakdown & Model Matrix Code Segment Description ADV551 Digital Output Module P With pulse width output function/time-proportional output function 5 Without status display; without explosion protection 0 Basic type /D5A00 With KS Cable Interface Adapter for 32-channel Digital (ATD5A-00) Hardware Specifications Parameter Specification Model ADV551-P50/D5A00 Brand Yokogawa Product Type Digital Output Modules Number of Channels 32 Rated Input Voltage 24 V DC Load Voltage 24 V DC, 50 mA Output Format Current sink External Power Supply Range 20.4 to 26.4 V DC Output Response Time 3 ms max (status output), 10 ms max (mixed status/pulse output) Pulse Width Range 8 ms to 7200 s Pulse Width Resolution 8 ms Withstanding Voltage 2 kV AC for 1 minute between output signal and system Common Isolation Voltage 500 V AC for 1 minute between commons Isolation Structure Common minus (-) side every 16 channels Option Adapter ATD5A-00 KS Cable Interface Adapter Weight 0.2 kg Origin Japan Channel Isolation and DCS Signal Integrity The ADV551-P50/D5A00 module implements grouped common isolation architecture with separation applied every 16 channels on the common minus side. This arrangement reduces inter-channel interference during simultaneous status and pulse output operation within distributed control system signal paths. The current sink output structure is intended for 24 V DC field-side switching circuits where external supply regulation remains within the specified 20.4 to 26.4 V DC operating window. Pulse width output handling supports both short-duration command pulses and extended time-proportional output cycles up to 7200 s. Dielectric isolation ratings include 2 kV AC withstand capability between output signals and system circuitry, together with 500 V AC isolation between grouped commons for one minute test duration. Frequently Asked Questions Q: Does the ADV551-P50/D5A00 support pulse-based output operation?A: Yes. The module includes pulse width output and time-proportional output functions with selectable pulse durations from 8 ms to 7200 s. Q: What output topology is used by the module?A: The module uses a current sink output format intended for 24 V DC discrete field output circuits. Q: Are all 32 channels isolated individually?A: No. The common minus side is grouped in 16-channel sections with isolation applied between commons according to the specified 500 V AC withstand rating. Field Installation Guidelines Verify external field supply voltage remains within the specified 20.4 to 26.4 V DC range before energizing output circuits. Separate pulse output wiring from high-current motor or relay cabling to reduce inductive noise coupling into digital signal paths. Maintain shield grounding at a single designated control cabinet grounding point to prevent ground loop circulation. Confirm KS Cable Interface Adapter alignment and connector seating before applying field power to the module assembly. Do not route low-level signal cables in parallel with AC mains conductors inside shared cable trays without metallic segregation.
$200.00 $100.00
-
Yokogawa Yokogawa ADV151-P13 Digital Input Module | New & Original Stock
Yokogawa ADV151-P13 Digital Input Module Configured for contact status signal acquisition in CENTUM and related Yokogawa DCS platforms, the Yokogawa ADV151-P13 (ADV151 Digital Input Module) provides direct physical and electrical execution for multi-channel discrete input processing and transistor contact signal interfacing. Suffix Breakdown & Model Matrix Model Segment Description ADV151 Digital Input Module -P13 Specific hardware and interface revision suffix Hardware Specifications Parameter Specification Model ADV151-P13 Brand Yokogawa Product Type Digital Input Module Input Channels 64-channel input Input Signal Type Contact input OFF Signal Level 100 kOhm or more ON Signal Level 200 Ohm or less Input Response Time 8 ms Output Signal Transistor contact Output Response Time 16 ms or less Signal Isolation Isolated channels Pushbutton Input Function Not supported Power Consumption 800 mA at 5 VDC Weight Approx. 0.30 kg Mounting Method Control unit installation Origin Japan Channel Isolation and Discrete Signal Handling The ADV151-P13 module implements channel isolation architecture for discrete contact signal processing inside distributed control system environments. Input transition recognition is executed through defined resistance thresholds, with OFF-state recognition at 100 kOhm or higher and ON-state recognition at 200 Ohm or lower. The transistor contact output section operates independently from field contact detection circuitry to reduce electrical propagation between adjacent signal paths. Isolation structure supports stable status acquisition during simultaneous multi-channel switching events and minimizes channel-to-channel interference within cabinet-level wiring assemblies. Frequently Asked Questions Q: Does the ADV151-P13 support hot swapping during system operation?A: The provided specification does not define online insertion or hot-swap capability. Module replacement procedures should follow the applicable Yokogawa control station maintenance manual and system shutdown requirements. Q: What type of field devices can be connected to the input channels?A: The module is intended for dry contact or contact status input signals meeting the specified ON and OFF resistance thresholds. Q: Is pushbutton pulse detection supported by the module firmware?A: No. The pushbutton input function is explicitly listed as not supported for the ADV151-P13. Field Installation Guidelines Install the module inside a grounded industrial control enclosure with separation maintained between discrete input wiring and high-voltage power conductors. Use shielded field wiring where cabinet electromagnetic interference is present. Verify contact resistance values from field devices before commissioning to ensure compliance with the defined ON and OFF threshold requirements. Terminal tightening torque should follow the associated Yokogawa hardware installation manual for the host control unit. During panel routing, avoid parallel cable placement with inverter output conductors or high-current motor feeders to reduce transient coupling into low-level status input circuits.
$200.00 $100.00
-
Yokogawa Digital Input Module ADV151-P63/D5A00 | Yokogawa
Yokogawa ADV151-P63/D5A00 Digital Input Module Configured for 32-channel digital signal acquisition in CENTUM and compatible Yokogawa DCS architectures, the Yokogawa ADV151-P63/D5A00 (ADV151 Digital Input Module) provides direct physical/electrical execution for 24 VDC sink/source status input processing through pressure clamp or dedicated cable termination interfaces. Suffix Breakdown & Model Matrix Code Segment Description ADV151 Digital Input Module P With pushbutton input 6 With status display; no explosion protection 3 ISA Standard G3 option and -20 to 70 degC temperature option D5A00 With KS Cable Interface Adapter for 32-channel digital signals (ATD5A-00) Hardware Specifications Parameter Specification Model ADV151-P63/D5A00 Brand Yokogawa Product Type Digital Input Module Number of Input Channels 32 Rated Input Voltage 24 VDC (sink/source) Input ON Voltage 18 to 26.4 VDC Input OFF Voltage 5.0 VDC or less Input Current 4.1 mA +/-20 % per channel Maximum Allowable Input Voltage 30.0 VDC Input Response Time 8 ms or less Withstanding Voltage 2 kVAC for 1 minute between input signal and system Common Isolation 500 VAC for 1 minute between commons every 16-channel External Connection Pressure clamp terminal, AKB331 cable, MIL connector cable Operating Temp -20 to 70 degC Weight 0.3 kg Origin Japan Channel Isolation and DCS Signal Interface Characteristics The module supports 24 VDC discrete input acquisition with grouped common isolation across each 16-channel segment. Input transition recognition is internally conditioned for status signal handling with response timing maintained within 8 ms. The D5A00 option integrates the KS cable interface adapter structure for direct termination of 32-channel digital field signals into Yokogawa DCS marshalling assemblies. The ADV151 architecture supports sink/source input logic compatibility, allowing mixed field device interfacing under common industrial discrete I/O standards. The G3 environmental specification extends tolerance against corrosive atmospheres typically associated with control cabinet installations. Frequently Asked Questions Q: Does the ADV151-P63/D5A00 support both sink and source input devices?A: Yes. The module is specified for 24 VDC sink/source discrete input operation within the rated voltage range. Q: What field termination methods are supported by this module?A: The module supports pressure clamp terminals, Yokogawa AKB331 dedicated cables, and MIL connector cable interfaces. Q: Is channel-to-channel isolation individually implemented on all 32 inputs?A: No. Common isolation is implemented per 16-channel group with 500 VAC withstand voltage between commons. Field Installation Guidelines Install the module inside a grounded control cabinet with segregated routing between discrete input wiring and high-energy AC power conductors. Maintain shield grounding at a single designated cabinet grounding point to minimize induced switching noise. Verify field input voltage before energization to prevent exceeding the 30.0 VDC maximum allowable input limit. During cable installation, maintain separation between relay output bundles and low-level status input circuits to reduce transient coupling into the digital input section. For KS cable interface configurations, confirm cable locking integrity and connector seating before applying system power. Avoid repeated insertion cycles under energized backplane conditions unless explicitly permitted by the host DCS maintenance procedure.
$200.00 $100.00
-
Yokogawa Digital Output Module ADV551-P63/D5A00 | Yokogawa
Yokogawa ADV551-P63/D5A00 Digital Output Module Configured for 32-channel discrete signal switching in CENTUM-based process control environments, the Yokogawa ADV551-P63/D5A00 (ADV551 Digital Output Module) provides direct physical/electrical execution. The module supports current sink transistor outputs at 24 V DC with pulse width output and time-proportional output functionality integrated through suffix code P. Suffix Breakdown & Model Matrix Code Segment Description ADV551 Digital Output Module P Pulse width output function/time-proportional output function 6 Status display included; no explosion protection 3 ISA Standard G3 option and temperature option (-20 to 70 degC) D5A00 KS Cable Interface Adapter for 32-channel digital interface ATD5A-00 Associated KS cable interface adapter model Hardware Specifications Parameter Specification Model ADV551-P63/D5A00 Brand Yokogawa Product Type Digital Output Module Origin Japan Number of Channels 32 digital output channels Output Format Current sink Rated Applied Voltage 24 V DC Maximum Load Current 100 mA/channel at 26.4 V Pulse Width Output Supported Time-Proportional Output Supported Isolation Withstand Voltage 2 kV AC between output signal and system for 1 minute Common-to-Common Withstand Voltage 500 V AC for 1 minute per 16-channel common minus side Operating Temp -20 to 70 degC Status Indication Integrated status display Explosion Protection Not included Interface Adapter ATD5A-00 KS Cable Interface Adapter Weight 0.2 kg Channel Isolation and DCS Signal Handling The ADV551 series operates within Yokogawa DCS architectures using isolated digital output group structures separated per 16-channel common configuration. The module is designed for direct transistor-level switching of field-connected loads while maintaining electrical separation between system-side circuitry and output-side circuits through 2 kV AC withstand isolation. The integrated pulse width output function permits time-proportional actuation control for electrically driven field devices requiring duty-cycle modulation rather than static ON/OFF state transitions. Wiring segregation between output commons and signal routing is required to minimize inductive coupling and transient propagation across adjacent channels. Frequently Asked Questions Q: Does the ADV551-P63/D5A00 support hot swapping during operation?A: Hot-swap capability is dependent on the installed Yokogawa control station architecture and I/O carrier configuration. Module insertion and removal procedures should follow the active controller maintenance sequence defined for the hosting DCS platform. Q: What type of field loads can be connected to the module outputs?A: The outputs are intended for 24 V DC current sink operation with a maximum load current of 100 mA per channel. External load characteristics must remain within the specified transistor switching limits. Q: Is inter-channel isolation provided for all 32 outputs?A: The module provides common grouping per 16-channel section. Isolation withstand ratings are specified between output signals and the system side, and between commons for each 16-channel common minus grouping. Field Installation Guidelines Before installation, verify that the base unit and KS cable interface adapter alignment match the designated slot assignment within the Yokogawa I/O carrier assembly. Improper connector engagement may result in intermittent output channel behavior. Separate digital output wiring from high-energy AC power conductors and variable frequency drive motor cables to reduce conducted electrical noise into the output commons. Shielded field wiring should use single-point shield grounding at the cabinet grounding bar unless otherwise defined by the plant grounding philosophy. During termination work, confirm output polarity orientation for current sink operation. External loads must reference the correct DC supply configuration to avoid reverse conduction or transistor damage. Do not exceed the specified 100 mA per-channel load current. Inductive field devices such as relays and solenoids should use external suppression components to limit switching transients at output terminals.
$200.00 $100.00
-
Yokogawa ADV551 Yokogawa Digital Output Module | New & Original Stock
Yokogawa ADV551-P10/D5A00 Digital Output Module Configured for transistor-based digital output execution in CENTUM and FIO rack control architectures, the Yokogawa ADV551-P10/D5A00 (ADV551 Digital Output Module) provides direct physical switching for 24 V DC field output circuits through 32 isolated sink-output channels. Suffix Breakdown & Model Matrix Parameter Specification Base Model ADV551 Full Order Code ADV551-P10/D5A00 Functional Suffix P - Supports pulse width and time-proportional output Adapter Specification D5A00 Replacement Model ADV551-P60/D5A00 Mounting Platform FIO rack compatible Hardware Specifications Parameter Specification Model ADV551-P10/D5A00 Brand Yokogawa Origin Japan Product Type Digital Output Module Output Channels 32 Output Type Current sink transistor output Rated Load Voltage 24 V DC Maximum Load Current 100 mA per channel at 26.4 V DC ON-State Voltage Drop Maximum 1.0 V DC OFF-State Leakage Current Maximum 0.1 mA Isolation Integrity 2 kV AC for 1 minute between signal and internal logic Common Group Isolation 500 V AC for 1 minute per 16-channel group Interface Adapter ATD5A-00 KS cable adapter Mounting Type FIO rack installation Power Consumption Maximum 500 mA at 5 V DC internal bus Weight 0.25 kg Dimensions Not specified by manufacturer Operating Temp Not specified by manufacturer Channel Isolation and DCS Output Handling The module implements grouped channel isolation using 16-channel segmentation with 500 V AC withstand separation between groups. Signal-side isolation from internal logic circuitry is rated at 2 kV AC for 1 minute. The transistor sink architecture is intended for direct switching of 24 V DC external loads within Yokogawa distributed control systems. Pulse width and time-proportional output execution are enabled through the "P" functional suffix. Output transition behavior is handled through transistor contact switching rather than relay-based mechanical actuation, eliminating contact wear associated with electromechanical outputs. Frequently Asked Questions Q: Does the ADV551-P10/D5A00 support relay-contact outputs?A: No. The module uses transistor-based current sink outputs only. External load wiring must match 24 V DC sink-output architecture requirements. Q: Can the module be installed in standard Yokogawa FIO racks without external converters?A: Yes. The module is designed for direct installation into compatible FIO rack systems and interfaces through the ATD5A-00 KS cable adapter. Q: Is hot swapping specified for this module?A: The provided manufacturer data does not explicitly define online insertion or hot-swap capability. Module replacement procedures should follow the rack and controller maintenance requirements of the associated Yokogawa DCS platform. Field Installation Guidelines Verify external load polarity before energizing sink-output channels. Maintain separation between output wiring and high-voltage power cabling to reduce inductive noise coupling. Connect shield drain wires to a single grounding reference point at the cabinet side only. Confirm that field load current does not exceed 100 mA per channel under maximum supply voltage conditions. Use the specified ATD5A-00 adapter assembly when integrating KS cable connections. During installation, isolate cabinet power before inserting or removing the module from the FIO rack backplane.
$200.00 $100.00
-
Yokogawa ADV169-P50 Yokogawa Digital Input Module | New & Original Stock
Yokogawa ADV169-P50 Digital Input Module Configured for contact status signal acquisition in CENTUM and related DCS backplane architectures, the Yokogawa ADV169-P50 (ADV169 Digital Input Module) provides direct physical/electrical execution. The module accepts 64-channel discrete input signals and transfers field status conditions through transistor contact output logic with isolated channel handling. Suffix Breakdown & Model Matrix Model Segment Description ADV169 Digital Input Module base model -P50 Factory-defined suffix variant for module configuration Hardware Specifications Parameter Specification Model ADV169-P50 Brand Yokogawa Product Type Digital Input Module Input Channels 64-channel input Input Signal OFF State 100 kOhm or more Input Signal ON State 200 Ohm or less Input Response Time 8 ms Output Type Transistor contact Output Response Time 16 ms or less Signal Isolation Isolated channels Pushbutton Input Function Not supported Maximum Current Consumption 800 mA at 5 VDC Weight Approx. 0.30 kg Mounting Method Control unit installation Origin Japan Power Consumption 5 VDC backplane supply Channel Isolation and DCS Signal Handling The ADV169-P50 module implements channel isolation between field-side discrete status circuits and internal control processing sections. Isolation architecture reduces conductive interference transfer between adjacent input groups during simultaneous switching operations. The module processes dry-contact and contactor-derived voltage status signals through threshold-based ON/OFF resistance discrimination. OFF-state recognition occurs at 100 kOhm or higher, while ON-state recognition is executed at 200 Ohm or lower. This method supports stable discrete state interpretation within DCS cabinet wiring environments containing mixed inductive loads. Frequently Asked Questions Q: Does the ADV169-P50 support hot swapping during energized backplane operation?A: Hot-swap capability is not specified in the provided technical data. Module replacement procedures should follow the control station maintenance manual and site isolation procedures. Q: What type of field signals can be connected to the module inputs?A: The module is intended for contactor voltage status signals and discrete contact-state monitoring using resistance-based ON/OFF detection thresholds. Q: Are the input channels electrically isolated?A: Yes. The module specifications indicate isolated channel construction for field signal separation. Field Installation Guidelines Route discrete input wiring separately from high-current motor feeder cables and inverter output conductors. Maintain shield grounding at a single cabinet-side termination point to reduce ground loop current circulation. Verify terminal torque values according to the associated Yokogawa control cabinet documentation before energization. Confirm 5 VDC backplane power availability and current budget before module insertion into populated racks. Use labeled ferrules and segregated terminal grouping for multi-channel field status circuits to simplify maintenance tracing.
$200.00 $100.00
-
Yokogawa Digital Output Module ADV569-P50 Yokogawa | New & Original Stock
Yokogawa ADV569-P50 Digital Output Module Configured for transistor-based digital output execution in CENTUM process control networks, the Yokogawa ADV569-P50 (ADV569 Digital Output Module) provides direct physical/electrical execution. The module supports 64 isolated output channels with current sink transistor outputs, one-shot pulse generation, and time-proportioning output control for discrete field interfacing within Yokogawa DCS architectures. Suffix Breakdown & Model Matrix Item Description ADV569 Base digital output module platform -P50 Factory-defined suffix variant for CENTUM-compatible hardware configuration Hardware Specifications Parameter Specification Model ADV569-P50 Brand Yokogawa Origin Japan Product Type Digital Output Module Number of Channels 64 Output Type Transistor contact (current sink) Signal Isolation Common every 16 channels on negative side Rated Load Voltage 30 VDC Maximum Load Current 100 mA per channel Output ON Voltage <= 2 VDC Leakage Current (OFF) <= 0.1 mA Output Response Time 16 ms Pulse Width Range 8 ms to 7200 s Pulse Width Resolution 8 ms Output Delay Accuracy Up to 1 ms ON/OFF delay Supported Load Type Resistive and inductive loads Protection Requirement External diode required for DC relay driving Redundancy Support Dual redundancy supported Power Consumption 800 mA at 5 VDC Weight Approx. 0.30 kg Channel Isolation and Process Signal Segmentation The ADV569-P50 implements channel grouping isolation on the negative side for every 16 output channels. This segmentation structure reduces common return interference during simultaneous transistor switching operations inside distributed process control cabinets. The module is designed for discrete signal execution associated with process sequence timing, pulse-driven actuation, and time-proportioning output behavior within CENTUM systems. The output circuitry supports both resistive and inductive field loads. When driving DC relay coils or inductive devices, external flyback diode protection is required to suppress reverse transient voltage across the transistor output stage. Frequently Asked Questions Q: Does the ADV569-P50 support redundant operation within CENTUM systems?A: Yes. The module supports dual redundancy operation when installed within compatible Yokogawa system architectures. Q: Can the module directly drive inductive DC relay loads?A: Yes, but external diode suppression must be installed across relay coils to prevent reverse voltage transients during output de-energization. Q: What output timing functions are available on the module?A: The module supports one-shot pulse output from 8 ms to 7200 s and time-proportioning output control with up to 1 ms ON/OFF delay capability. Field Installation Guidelines Before installation, isolate cabinet control power and verify backplane compatibility with the designated CENTUM node configuration. Maintain separation between output wiring bundles and analog signal cabling to reduce switching noise propagation. For inductive load wiring, install flyback suppression diodes directly at the field device terminals rather than at the marshalling cabinet whenever possible. Shield grounding should follow single-point cabinet grounding practices to avoid circulating return currents between channel groups. Confirm load current remains below 100 mA per channel during steady-state operation. Excessive inrush current from solenoids or relay assemblies should be evaluated before field energization.
$200.00 $100.00
-
Yokogawa ADV142-P03 Yokogawa AC Digital Input Module | New & Original Stock
Yokogawa ADV142-P03 AC Digital Input Module Configured for AC discrete signal acquisition in CENTUM VP systems, the Yokogawa ADV142-P03 (ADV142 AC Digital Input Module) provides direct physical/electrical execution. The module processes 200 to 240 VAC field inputs through 16 isolated channels with common isolation every 8 channels and supports ON/OFF state monitoring together with pushbutton edge counting functions. Suffix Breakdown & Model Matrix Model Segment Description ADV142 AC Digital Input Module -P03 200 to 240 VAC input specification variant Hardware Specifications Parameter Specification Model ADV142-P03 Brand Yokogawa Origin Japan Product Type AC Digital Input Module Number of Channels 16 Input Signal Type AC digital input Signal Isolation Common isolation every 8 channels Rated Input Voltage 200 to 240 VAC, 50/60 Hz Input ON Voltage (Peak) 160 VAC (226 V peak) to 264 VAC (373 V peak) Input OFF Voltage (Peak) 40 VAC (56 V peak) maximum Input Current (Typical) 6.2 mA per channel at 240 V / 60 Hz Input Current (Maximum) 9.3 mA per channel Input Response Time 160 ms maximum Minimum ON Detection Time 200 ms Maximum ON/OFF Cycle 2.5 Hz Withstanding Voltage 2 kVAC for 1 minute (signal to system), 1.35 kVAC between commons Power Consumption 500 mA at 5 VDC Weight 0.3 kg Dimensions Not specified in supplied data Operating Temp Not specified in supplied data Redundancy Support Dual redundant configuration supported Channel Isolation and DCS Signal Handling The ADV142-P03 implements channel grouping isolation every 8 channels to separate high-voltage AC field signals from internal control circuitry within CENTUM VP I/O architectures. The module supports discrete status acquisition for 200 to 240 VAC process contacts while maintaining electrical separation between isolated commons. Input processing includes ON/OFF state validation and pushbutton pulse detection for low-frequency transition monitoring up to 2.5 Hz. Isolation barriers are designed for direct integration into distributed process control cabinets where mixed-voltage field termination and grounded AC sensing loops are present. Frequently Asked Questions Q: Does the ADV142-P03 support redundant I/O operation? A: Yes. The module supports dual redundant configuration within compatible Yokogawa CENTUM VP system architectures. Q: Can the module detect short-duration pulse transitions from pushbuttons? A: Yes. The specified minimum ON detection time for pushbutton input processing is 200 ms, with a maximum ON/OFF cycle rate of 2.5 Hz. Q: What isolation structure is used for the input channels? A: The module provides common isolation for every 8 input channels. Signal-to-system dielectric withstand voltage is rated at 2 kVAC for 1 minute. Field Installation Guidelines Verify field input voltage before energizing terminal circuits. The module is intended for 200 to 240 VAC discrete input signals only. Maintain separation between AC input wiring and low-level analog or communication cables inside the cabinet to reduce induced noise coupling. Connect cable shields according to plant grounding standards and terminate shields at a single grounding reference point where applicable. Confirm backplane seating and locking engagement before applying system power in redundant node configurations. Use properly rated terminal blocks and insulation spacing for high-voltage AC field wiring. Perform insulation resistance checks on field loops prior to module insertion when commissioning new installations.
$200.00 $100.00
-
Yokogawa ADV859-P00 Yokogawa Digital I/O Module | New & Original Stock
Yokogawa ADV859-P00 Digital I/O Module Configured for isolated 16-channel discrete signal handling in CENTUM-compatible control networks, the Yokogawa ADV859-P00 (ADV859 Digital I/O Module) provides direct physical/electrical execution for contact status acquisition and transistor output switching through ST2-compatible card architecture. Hardware Specifications Parameter Specification Model ADV859-P00 Brand Yokogawa Product Type Digital I/O Module Input Channels 16-channel digital input Output Channels 16-channel digital output Signal Isolation Isolated channels Input Signal Type Contact input, voltage input OFF Signal Detection 100 kOhm or more ON Signal Detection 200 Ohm or less Minimum Current for Short-Circuited Contact 1.25 mA Voltage Input OFF Signal 4.5 to 25 VDC Voltage Input ON Signal +/-1 VDC, 200 Ohm or less Input Contact Rating 5 VDC, 20 mA or more Pushbutton Input Function Not supported Input Response Time 8 ms Output Signal Transistor contact Output Contact Rating 30 VDC, 100 mA Supported Load Type Inductive load, resistive load Output Response Time 16 ms or less Pulse Width Range 8 ms to 7200 s Pulse Width Resolution 8 ms ON/OFF Delay Addition Maximum 1 ms Maximum Current Consumption 450 mA at 5 VDC External Connection Dedicated KS2 cable Compatible Card Type ST2 compatible Weight Approx. 0.30 kg Origin Japan Operating Temp Not specified Dimensions Not specified Power Consumption 450 mA at 5 VDC Channel-to-Channel Isolation Characteristics The ADV859-P00 implements isolated input and output channel architecture for discrete signal segregation within distributed control system environments. The module accepts both dry-contact and voltage-driven status inputs while maintaining electrical separation between field-side signal transitions and internal logic processing circuits. Voltage input recognition is processed through defined OFF-state and ON-state thresholds to prevent false state transitions caused by line leakage or induced noise. Transistor output stages are configured for low-current DC switching with compatibility for resistive and inductive field loads up to 30 VDC. The module interfaces through dedicated KS2 cabling and operates as an ST2-compatible card for Yokogawa control platform integration. Frequently Asked Questions Q: Does the ADV859-P00 support hot-swapping during system operation?A: The supplied specification does not explicitly define online insertion or removal capability. Module replacement procedures should follow the host DCS cabinet maintenance sequence and controller isolation practices. Q: What type of field devices can be connected to the digital outputs?A: The transistor outputs support inductive and resistive DC loads rated up to 30 VDC and 100 mA per output point. Q: Can the module accept both contact and voltage-based digital inputs simultaneously?A: The module supports both contact input and voltage input detection methods according to the specified ON/OFF threshold conditions. Field Installation Guidelines Use shielded field wiring for digital input circuits routed near inverter, relay, or motor starter cabling. Separate input and output wiring bundles to reduce transient coupling between switching circuits. Verify KS2 cable connector retention before energizing the I/O rack. Maintain proper DC common reference continuity between external devices and module terminals. For inductive output loads, install external flyback suppression devices to limit transistor switching transients. Avoid routing low-level digital signal wiring in parallel with high-current AC feeder conductors.
$200.00 $100.00
-
Yokogawa ADV851-P50 Yokogawa DIO Module CENTUM Interface Datasheet
YokogawaADV851-P50 Digital I/O Module Configured for bi-directional discrete signal interfacing between field devices and Field Control Station (FCS) in CENTUM VP / CENTUM CS 3000 systems, the Yokogawa ADV851-S (ADV851 Digital I/O Module) provides direct physical/electrical execution. The module implements mixed discrete channel processing for status acquisition and command output within a single I/O card, mapping field contact states and transistor-driven outputs into control system logic blocks. Suffix Breakdown & Model Matrix The ADV851 is referenced under multiple ordering suffix conventions depending on terminal base and assembly configuration. Typical identifiers include: ADV851: Base module designation ADV851-S: Standard assembled variant P50 terminal base configuration: mechanical mounting option for field termination No further manufacturer-defined functional segmentation is specified for suffix variants beyond mechanical and assembly-level differences. Hardware Specifications Parameter Specification ModelBrand Yokogawa ADV851 Origin Japan Channel Capacity 32 channels (16 digital inputs + 16 digital outputs) Rated Voltage 24 VDC Input Type Sink / source contact detection Output Type Transistor switching output System Compatibility CENTUM VP / CENTUM CS 3000 Isolation Channel-to-system optical isolation DCS Interface & Electrical Isolation Characteristics The ADV851 implements channel-separated electrical isolation between field wiring and internal control logic. Input channels detect dry-contact or powered contact states, while output channels drive external loads using transistor switching stages. Within the Yokogawa DCS architecture, discrete signals are mapped into function blocks via internal backplane communication, supporting deterministic state propagation between field and controller layers. Channel grouping architecture reduces cross-interference between input acquisition paths and output drive circuits under dense cabinet wiring conditions. Frequently Asked Questions Q: Can input and output channels operate simultaneously on the same module?A: Yes. The module supports concurrent processing of 16 input channels and 16 output channels through independent internal channel groups. Q: What is the electrical isolation boundary in this module?A: Optical isolation is implemented between field terminals and internal control circuitry to separate external wiring disturbances from logic-level processing. Q: Does hot-swapping affect active channel states?A: During module replacement, channel states are not retained locally. System behavior depends on FCS configuration and redundancy setup. Field Installation Guidelines Ensure 24 VDC field power is isolated before terminal wiring. Maintain separation between input and output wiring harnesses to reduce induced coupling across long cable runs. Use shielded cables for external field device connections; terminate shields at cabinet ground reference point only. Verify correct seating of module into backplane connector before energizing system power. Avoid routing high-energy switching lines parallel to signal cables within the same duct path. Confirm terminal base compatibility (including P50 configurations) prior to mechanical installation.
$200.00 $100.00
-
Yokogawa ADV551-P13 Yokogawa Digital Output Module Datasheet & Technical Manual
Yokogawa ADV551-P13 Digital Output Module Configured for discrete signal actuation in distributed control logic execution within Yokogawa DCS I/O architectures, the Yokogawa ADV551-P13 (ADV551-P13 Digital Output Module) provides direct physical/electrical switching of 24 V DC field loads via current sink output structure across 32 independent channels. Suffix Breakdown & Model Matrix No validated manufacturer-provided suffix decomposition is available for ADV551-P13. The identifier is treated as a single-order hardware code within the ADV500 I/O module family, with P13 denoting a legacy production variant superseded by ADV551-P63. Hardware Specifications Parameter Specification Model ADV551-P13 Brand Yokogawa Origin JAPAN Product Type Digital Output Module Output Channels 32 channels Rated Voltage 24 V DC Output Format Current sink Max Load Current 100 mA / channel at 26.4 V Withstanding Voltage 2 kV AC (output to system, 1 min), 500 V AC (between commons, 1 min) Channel Grouping Common minus side per 16 channels DCS Output Stage Signal Conditioning and Channel Group Isolation Within Yokogawa process control I/O architectures, the ADV551-P13 implements grouped common return segmentation across 16-channel blocks, enabling controlled fault containment at field termination level. The current sink topology defines load-side energization behavior, where output transistors complete return paths to system common. In modular DCS backplane operation, this structure supports deterministic state updates aligned with scan-based execution cycles and maintains electrical segregation between channel banks under mixed inductive load conditions. Frequently Asked Questions Q: Can ADV551-P13 outputs be paralleled for higher load current?A: No. Each channel is independently rated at 100 mA maximum. Parallel operation is not supported due to internal transistor current distribution limits. Q: What happens when inductive loads are connected without suppression?A: Voltage transients may exceed internal protection thresholds. External flyback diodes or suppression networks are required at field terminals. Q: Is hot-swap supported for ADV551-P13 within the rack system?A: Hot-swap capability depends on the host base unit design. The module itself does not internally manage load-side isolation during insertion/removal. Field Installation Guidelines Ensure 24 V DC supply polarity is verified before energizing field terminals Maintain separation between output wiring and high-noise power conductors Use shielded cabling for long-distance field runs with single-point grounding at cabinet side Apply surge suppression for inductive loads such as solenoids and relay coils Confirm group common (16-channel grouping) wiring integrity before commissioning Avoid live insertion unless the rack backplane explicitly supports module hot replacement
$200.00 $100.00
-
Yokogawa ADV151-E10 Yokogawa Digital Input Module Datasheet&Technical Manual
Yokogawa ADV151-E10 Digital Input Module The Yokogawa ADV151-E10 also cataloged as the ADV151-E10 Digital Input Module, operates as a dedicated hardware component for discrete signal acquisition within Yokogawa FIO system platforms. Configured for 24 VDC field signal interfacing in 32-channel configurations, the Yokogawa ADV151-E10 (ADV151-E10 module) provides direct electrical execution of ON/OFF state detection from external field devices into DCS input processing logic. Suffix Breakdown & Model Matrix ADV151: Base digital input module family designation E10: Hardware revision / configuration variant identifier (no further decomposition defined in source data) Hardware Specifications Parameter Specification ModelBrand Yokogawa ADV151-E10 Origin Japan Input Channels 32 channels Rated Input Voltage 24 VDC (sink/source compatible) Input ON Voltage 18 to 26.4 VDC Input OFF Voltage 5.0 VDC or less Input Current 4.1 mA +/- 20% System Compatibility Yokogawa FIO system Channel-to-Channel Isolation and FIO Backplane Electrical Structure The ADV151-E10 implements isolated input channel architecture to reduce electrical interference propagation between field terminals. Each channel operates as an independent sensing path for 24 VDC discrete signals, supporting mixed sink/source wiring configurations. Within the FIO system backplane, input state acquisition is transferred as serialized digital status data to the controller layer, maintaining separation between field termination wiring and internal DCS logic domain. Isolation design is oriented toward suppression of inter-channel leakage currents and stabilization of threshold detection margins under industrial switching conditions. Frequently Asked Questions Q: Can the ADV151-E10 be hot-swapped in the FIO system?A: Hot-swap capability depends on the FIO base unit configuration. The module itself is designed for backplane insertion, but removal under load requires system-level support. Q: What is the backplane load behavior of the module?A: The module draws a defined internal logic supply via the FIO backplane. Exact current consumption is system-dependent and not specified at module level in provided data. Q: Does each channel maintain electrical isolation?A: Yes. Each of the 32 input channels is isolated to reduce cross-channel electrical interference during switching transitions. Field Installation Guidelines The module shall be installed into a compatible Yokogawa FIO base rack with correct alignment of backplane connectors. Field wiring must observe polarity requirements for 24 VDC sink/source configurations. Input signal cables should be routed separately from power conductors to minimize inductive coupling. Shield termination, when used, shall be grounded at a single-point reference in the control cabinet. Terminal tightening torque and wiring gauge must follow Yokogawa system installation standards for digital input modules.
$200.00 $100.00
-
Yokogawa ADV157-S00 Yokogawa Digital Input Module | New&Original Stock
Yokogawa ADV157-S00 Digital Input Module Configured for discrete signal acquisition in distributed control I/O subsystems, the Yokogawa ADV157-S00 (ADV157 Input Module) provides direct physical/electrical execution of 32-channel 24 VDC status monitoring across Yokogawa field I/O architectures. The module processes sink/source digital inputs for ON/OFF state detection within cabinet-level automation backplane environments. Suffix Breakdown & Model Matrix ADV157: Base digital input module series identifier S00: Hardware revision / configuration variant (no further breakdown defined in provided data) Hardware Specifications Parameter Specification Model / Brand ADV157-S00 / Yokogawa Origin Japan Weight 0.4 kg PowerConsumption 350 mA @ 5 VDC Number of Input Channels 32 channels Rated Input Voltage 24 VDC (sink/source) Input ON Voltage 18 to 26.4 VDC Input OFF Voltage 5.0 VDC or less Input Current 4.1 mA +20% per channel Maximum Allowable Voltage 30 VDC Insulation 2 kVAC (input to system, 1 minute) Backplane Isolation 500 VAC between commons (16-channel grouping) Response Time <= 8 ms (status input) Yokogawa Channel-Level Signal Conditioning Architecture The ADV157-S00 implements channel-grouped isolation architecture typical of Yokogawa DCS remote I/O subsystems, where 16-channel common segmentation reduces cross-channel disturbance propagation under high-density digital field wiring. The input stage performs voltage threshold discrimination with defined ON/OFF hysteresis boundaries for 24 VDC field devices, supporting stable logic state acquisition in electrically noisy cabinet environments. Frequently Asked Questions Q: Can the ADV157-S00 be hot-swapped during system operation?A: Hot-swap capability depends on the host I/O base unit and system configuration. The module itself does not define autonomous hot-swap behavior. Q: Does each channel have independent electrical isolation?A: Isolation is implemented in grouped form (common per 16 channels). It is not fully per-channel isolated architecture. Q: What is the backplane power dependency?A: The module requires 5 VDC backplane supply with a maximum consumption of 350 mA. Field Installation Guidelines Ensure all field wiring is rated for 30 VDC or higher insulation class. Maintain separation between input signal cables and power conductors to reduce inductive coupling. Apply correct common wiring segmentation according to 16-channel grouping structure. Verify terminal torque specifications according to Yokogawa base unit mechanical documentation. Perform continuity and dry-contact simulation before energizing system backplane. Ensure proper grounding of cabinet frame to minimize common-mode noise injection into input circuits.
$200.00 $100.00
-
Yokogawa ADV557-S00 Yokogawa Digital Output Control Module
Yokogawa ADV557-S00 Digital Output Module Configured for discrete field device actuation in Vnet/IP rack-based control architecture, the Yokogawa ADV557-S00 (ADV557-S00 Digital Output Module) provides direct electrical switching of external loads via isolated transistor output stages within Yokogawa DCS backplane systems. Hardware Specifications Parameter Specification ModelBrand Yokogawa ADV557-S00 Origin Japan Weight 0.5 kg Dimensions 130 x 127.2 x 32.8 mm OperatingTemp 0 degC to 55 degC PowerConsumption Backplane powered (not separately specified) Product Type Digital Output Module Number of Channels 16 isolated outputs Output Type NPN open-collector (sink type) Output Voltage Range 12 to 24 VDC Max Output Current 0.5 A per channel Surge Current 1.0 A (10 ms max) Response Time <= 0.5 ms Isolation Optical isolation per channel Protection Functions Short-circuit, overvoltage protection Diagnostics Channel fault and overload detection Mounting Rack-mounted Vnet/IP system Channel Isolation and Field Output Execution The ADV557-S00 output stage architecture is based on channel-to-channel optical isolation with independent fault monitoring per point. Each transistor output is configured for sink-type switching, supporting direct interface to relays, solenoids, indicators, and alarm loads. Within Yokogawa Vnet/IP rack systems, output state execution is synchronized through backplane communication, ensuring deterministic update cycles between controller logic and field actuation layers. Diagnostic feedback per channel is internally mapped to module-level fault registers for maintenance-level inspection. Frequently Asked Questions (FAQ) Q: Can the ADV557-S00 be hot-swapped during system operation?A: Hot-swap capability depends on system rack configuration. Electrical isolation prevents cross-channel damage, but backplane handling must follow system shutdown procedures unless supported by platform redundancy design. Q: What is the backplane current dependency for this module?A: The module draws operating power exclusively from the Vnet/IP system backplane. No external auxiliary supply is required. Q: How is overload condition handled at channel level?A: Each channel implements internal current limiting and fault detection. Overload conditions trigger channel-specific shutdown and diagnostic flagging without affecting other channels. Field Installation Guidelines Maintain correct orientation when inserting the module into the designated Yokogawa rack slot to ensure proper backplane connector engagement. Verify that all field wiring complies with 12 to 24 VDC load specifications and that inductive loads such as solenoids are fitted with appropriate suppression elements. Shielded cabling is recommended for high-noise environments, with shield termination performed at a single grounding point to avoid ground loop formation. Avoid live insertion unless the system architecture explicitly supports hot-swap operation under controlled maintenance procedures.
$200.00 $100.00
-
Yokogawa Digital Output Module ADV561-P01 Yokogawa Datasheet & Technical Manual
Yokogawa ADV561-P01 Digital Output Module The Yokogawa ADV561-P01, also cataloged as the ADV561-P01 Digital Output Module, operates as a dedicated hardware component for discrete 24 VDC signal actuation within Yokogawa DCS I/O subsystem. Configured for on/off control signal execution in distributed control I/O nodes, the Yokogawa ADV561-P01 (ADV561-P01 Digital Output Module) provides direct electrical switching interface for field actuators and solenoid loads under 24 VDC backplane-driven architectures. Suffix Breakdown & Model Matrix No official suffix segmentation or hierarchical model matrix is defined for ADV561-P01 based on provided documentation. Hardware Specifications Parameter Specification Model ADV561-P01 Brand Yokogawa Origin Japan Output Channels 64 digital output channels Output Type 24 VDC discrete switching Isolation Channel-to-channel electrical isolation Functional Modes Standard ON/OFF output; PWM / time-proportional (P suffix option where applicable) DCS I/O Electrical Architecture Characteristics Channel-level isolation is implemented to suppress inter-channel coupling effects under dense I/O loading conditions. The module interfaces with Yokogawa DCS backplane infrastructure, maintaining deterministic output state updates across distributed I/O scanning cycles. 24 VDC field compatibility allows direct wiring to standard industrial actuator coils without intermediate signal conditioning relays in low-power switching scenarios. Frequently Asked Questions Q: Does the ADV561-P01 support hot-swap operation within the rack?A: Hot-swap capability depends on the specific Yokogawa baseplate configuration; the module itself uses backplane electrical interfacing without onboard field rewiring requirements. Q: What is the effect of channel isolation on output switching integrity?A: Channel isolation reduces cross-channel leakage paths and limits ground potential propagation between output lines under simultaneous switching conditions. Q: Can PWM mode be used for proportional load control?A: PWM/time-proportional functionality (when P option is implemented) enables duty-cycle-based switching suitable for externally integrated power staging circuits. Field Installation Guidelines Maintain power isolation before insertion or removal of the module from the baseplate. Ensure 24 VDC field wiring is terminated with correct polarity alignment per terminal designation. Shielded cabling is recommended for long-distance output runs to reduce electromagnetic coupling from adjacent high-current conductors. Verify backplane seating force is fully engaged to maintain stable signal propagation across I/O scan cycles.
$200.00 $100.00
-
Yokogawa ADV151-E00 Yokogawa Digital Input Module Datasheet&Technical Manual
Yokogawa ADV151-e00 S2 Digital Input Module TheYokogawa ADV151-e00 S2serves astheprimaryADV151Digital Input Moduleutilized toexecute discrete field signal acquisition across CENTUM-based I/O platforms. The module converts 24 VDC digital field contact states into isolated internal logic signals for backplane transmission within distributed control architectures. SuffixBreakdown&ModelMatrix ADV151: Base model digital input module e00: Electrical configuration variant (no additional functional extension specified in provided data) S2: Style revision level designation C3Mc11440G: Manufacturing / traceability code Ex Nc [Nl] IIC T4 X: Intrinsic safety marking classification Cl. I, Div. 2, Groups A, B, C, D: Hazardous location compliance category T4: Temperature class limit designation Atd5A-00 S1: Related platform variant reference (auxiliary series mapping) HardwareSpecifications Parameter Specification ModelBrand Yokogawa ADV151-e00 S2 Origin Indonesia Weight 300 g Rated Input Voltage 24 VDC (field interface standard) Isolation Channel-to-backplane galvanic isolation (architecture dependent) Safety Marking Ex Nc [Nl] IIC T4 X Hazard Classification Class I, Division 2, Groups A, B, C, D Field Control Signal Conditioning and Channel Isolation Behavior Within Yokogawa distributed I/O systems, the ADV151 input stage implements channel-level signal conditioning prior to backplane transmission. Digital contact states are buffered through opto-isolated input circuitry to suppress ground potential differences between field wiring and system logic reference. The module maintains defined input threshold recognition for 24 VDC nominal signals, with internal filtering to reject transient contact bounce. Backplane communication is handled via system bus arbitration, where input state snapshots are synchronized at scan-cycle intervals defined by the controller. Intrinsic safety marking (Ex Nc [Nl] IIC T4 X) indicates compatibility with non-incendive field wiring zones under specified energy limitation boundaries. FrequentlyAskedQuestions Q: Does the ADV151-e00 S2 support hot-swap replacement under energized backplane conditions?A: Hot-swap capability is determined by the Yokogawa I/O base system architecture. The module itself does not independently manage insertion interlocks. Q: What is the input filtering behavior for fast switching dry contacts?A: Input channels implement internal debounce filtering to stabilize contact state transitions before backplane update cycles. Q: Does channel isolation prevent cross-channel leakage under mixed field wiring?A: Channel-to-backplane isolation reduces electrical coupling, while channel grouping and PCB separation limit adjacent signal interference. FieldInstallationGuidelines Install the module only in a compatible Yokogawa I/O base unit with correct mechanical keying alignment. Ensure field wiring follows 24 VDC dry contact standards with proper polarity verification where applicable. Shielded cables should be grounded at a single-point earth reference to minimize ground loop formation. Maintain separation between digital input wiring and high-voltage conductors to reduce electromagnetic coupling. Verify hazardous area compliance marking before deployment in classified zones. Backplane connectors must be fully seated to ensure stable signal integrity across all channels.
$200.00 $100.00
-
Yokogawa Digital Output Module ADV561-P51 Yokogawa Datasheet & Technical Manual
Yokogawa ADV561-P51 Digital Output Module Configured for discrete signal actuation in distributed I/O backplane networks, the Yokogawa ADV561-P51 (ADV561 Digital Output Module) provides direct physical/electrical execution of 24 V DC switching commands across Yokogawa field I/O architectures. HardwareSpecifications Parameter Specification ModelBrand Yokogawa ADV561-P51 Origin Japan Weight 0.3 kg Output Channels 64 channels Output Type Digital Output Rated Voltage 24 V DC Isolation Channel-to-channel isolation (design dependent on module architecture) Mounting Backplane-mounted I/O module Field Control Station Signal Execution Architecture The ADV561 series is integrated into Yokogawa distributed control environments where backplane-based I/O determinism governs output state transitions. Within CENTUM-based I/O subsystems, digital output refresh cycles are synchronized via internal bus communication, ensuring stable state propagation across densely populated 64-channel configurations. Channel grouping architecture supports electrical isolation boundaries to reduce cross-channel coupling under mixed load conditions. Integration with FOUNDATION Fieldbus and Profibus PA gateway layers is handled at system interface level rather than module-level signaling. SuffixBreakdown&ModelMatrix ADV561: Base model digital output module P: Pushbutton input option enabled 5: No status display, no explosion protection 1: ISA Standard G3 environmental compliance option P51: Combined suffix configuration defining mechanical and environmental variant set FrequentlyAskedQuestions Q: Can the ADV561-P51 support hot-swap replacement under powered backplane conditions?A: Module replacement behavior depends on system backplane implementation. In typical Yokogawa I/O racks, hot-swap capability is governed at rack/controller level rather than module electronics. Q: What is the channel isolation behavior for dense 64-point output operation?A: Isolation is implemented to limit electrical interference between adjacent output channels, with separation defined by internal opto-isolation and backplane segregation architecture. Q: Does firmware update affect output state retention?A: Output retention during firmware or configuration updates is system-dependent and typically managed by controller-level fail-safe logic rather than module-level storage. FieldInstallationGuidelines Ensure the module is inserted into a compatible Yokogawa I/O base unit with correct backplane alignment. Verify that 24 V DC field power distribution is within rated tolerance before energization. Maintain separation of output wiring from high-voltage or high-noise conductors to preserve signal integrity. Shield grounding should be terminated at a single-point earth reference to minimize ground loop formation. Do not exceed terminal block current ratings per channel group. Mechanical seating must be fully engaged to ensure stable backplane contact resistance.
$200.00 $100.00
-
Yokogawa Digital Output Module ADV561P00S2 Yokogawa | New & Original Stock
Yokogawa ADV561P00S2 Digital Output Module TheYokogawa ADV561P00S2serves as the primaryADV561P00S2 Digital Output Module utilized to execute discrete field device switching across CENTUM VP I/O subsystem platforms. Configured for transistor-based current sink output operation in a 24 VDC load environment, the module provides 64-channel digital output control with defined low-level output saturation behavior and integrated status feedback handling. Suffix Breakdown & Model Matrix No validated suffix segmentation is defined in the provided technical data for ADV561P00S2. The full model string is treated as a single ordered part number. Hardware Specifications Parameter Specification ModelBrand Yokogawa ADV561P00S2 Origin JAPAN Weight 0.3kg Channel Count 64 digital output channels Output Type Transistor current sink Rated Load Voltage 24 VDC Output ON Voltage Drop Max 2 VDC Yokogawa Field I/O Signal Conditioning and Channel Architecture Within Yokogawa Field I/O architectures, the ADV561 series implements transistor-based switching elements optimized for discrete signal interfacing with field actuators. Channel-to-channel electrical isolation architecture is applied at the module backplane interface level, supporting deterministic ON/OFF state execution with minimized leakage current propagation across adjacent output channels. The design aligns with DCS-level digital signal conditioning requirements where stable sink-current behavior is required under 24 VDC load distribution networks. Frequently Asked Questions Q: Can the ADV561P00S2 outputs be hot-swapped under load conditions?A: Hot-swap capability is dependent on CENTUM VP base unit configuration. Field wiring must be de-energized prior to module insertion or removal to avoid transient backfeed into transistor output stages. Q: What is the electrical behavior during output OFF state?A: In OFF state, output transistors present high impedance with leakage current limited by internal suppression circuitry, maintaining isolation from 24 VDC load rails. Q: Does channel activation introduce measurable propagation delay?A: Output response is governed by internal scan cycle timing of the I/O subsystem, typically aligned with DCS task scheduling rather than discrete hardware switching delay. Field Installation Guidelines The module shall be installed in a compatible Yokogawa CENTUM VP or Field I/O rack system with verified backplane alignment. Ensure that all field wiring is terminated according to current sink output topology, with proper common return routing to avoid floating reference conditions. Shielded cables are recommended for long-distance actuator connections. Shield termination should be performed at a single-point ground reference to reduce ground loop formation across multi-channel output groups. Backplane connectors must be fully seated without mechanical stress. Avoid applying torque or lateral force during insertion to prevent contact misalignment in the I/O rack interface.
$200.00 $100.00
-
Yokogawa Digital Output Module ADV551-P63 Yokogawa Datasheet & Technical Manual
Yokogawa ADV551-P63 Digital Output Module Configured for discrete ON/OFF field device actuation in CENTUM-style DCS I/O architectures, the Yokogawa ADV551-P63 (ADV551 Digital Output Module) provides direct electrical switching of 24 V DC current sink output channels across distributed control system backplane networks. SuffixBreakdown & Model Matrix No validated manufacturer breakdown for suffix "-P63" is provided in the supplied technical data. No internal segmentation is applied. Hardware Specifications Parameter Specification ModelBrand Yokogawa ADV551-P63 Origin JAPAN Weight 0.4kg PowerConsumption Backplane powered (value not specified) Output Channels 32 channels Output Type Current sink Rated Voltage 24 V DC Max Load Current 100 mA per channel at 26.4 V DC Withstanding Voltage 2 kV AC (output to system), 500 V AC (between commons, 1 min) Channel Grouping Common minus (-) side every 16 channels Yokogawa Channel-to-System Electrical Isolation Behavior The ADV551-P63 implements grouped common return architecture with segmented 16-channel isolation domains. Channel-to-system dielectric separation is rated at 2 kV AC for 1 minute, limiting propagation of external surge transients into backplane logic circuits. The current sink topology enables direct interfacing with externally supplied 24 V DC loads, where switching is performed by internal transistor stages referenced to grouped commons rather than isolated per-channel floating outputs. Signal integrity within dense I/O racks is maintained through internal separation between channel clusters, reducing cross-load coupling effects during simultaneous switching events in multi-point discrete control sequences typical of DCS event-driven logic execution. Frequently Asked Questions Q1: Can the ADV551-P63 be hot-swapped during system operation?A1: Hot-swap capability depends on the hosting Yokogawa I/O base and system configuration. Electrically, backplane disconnection removes both logic and field power reference, so output state transitions to undefined unless system-level interlocks are enforced. Q2: Does each channel provide galvanic isolation?A2: The module uses grouped isolation (16-channel common groups). Individual channel-to-channel galvanic isolation is not implemented; isolation is defined between output groups and system circuitry. Q3: What type of field load is supported by the current sink outputs?A3: The outputs are designed for externally powered 24 V DC loads where the module provides sink-path switching up to 100 mA per channel. Field Installation Guidelines The module shall be installed into a compatible Yokogawa I/O rack with confirmed backplane alignment. Field wiring must maintain segregation between field power commons and system logic grounds. Shield termination shall be executed at a single-point earth reference to avoid circulating ground currents across grouped output commons. Each output channel load circuit must include verification of external 24 V DC supply polarity prior to energization. Wire routing shall avoid parallel runs with high-frequency drive cables to reduce induced transient coupling into switching conductors.
$200.00 $100.00
-
Yokogawa ADV151-P50/D5A00 Yokogawa Digital Input Module & Technical Manual
Yokogawa ADV151-P50/D5A00 Digital Input Module The Yokogawa ADV151-P50/D5A00, also cataloged as the ADV151 Digital Input Module, serves as a 32-channel 24 VDC discrete signal acquisition interface for ON/OFF field contacts within Yokogawa distributed control system I/O architectures. Configured for isolated input scanning with pressure clamp and KS cable interface options, the Yokogawa ADV151-P50/D5A00 (ADV151 Digital Input Module) provides direct electrical state sampling and conversion into system-level digital process image data. Suffix Breakdown & Model Matrix P: Pushbutton input function enabled 5: No status display, no explosion protection configuration 0: Basic type variant /D5A00: KS cable interface adapter for 32-channel digital input (ATD5A-00) Hardware Specifications Parameter Specification ModelBrand Yokogawa ADV151-P50/D5A00 Origin Japan Weight 0.3 kg Dimensions Not specified OperatingTemp Not specified PowerConsumption 5 VDC backplane, max 500 mA Input Channels 32 channels (isolated) Rated Input Voltage 24 VDC (sink/source) Input ON Voltage 18 to 26.4 VDC Input OFF Voltage 5 VDC or less Input Current 4.1 mA +/-20 percent per channel Max Input Voltage 30 VDC Withstanding Voltage 2 kV AC (input-system, 1 min); 500 VAC (common, 1 min per 16 channels) Response Time 8 ms or less External Connection Pressure clamp terminal, AKB331, MIL connector cable Channel Isolation and 24 VDC Discrete Input Conditioning (DCS Architecture) The ADV151 input architecture implements per-channel electrical isolation for 24 VDC discrete signal acquisition. Each input channel is routed through isolated sensing circuitry prior to backplane digitization, reducing electrical interaction between adjacent channels under dense wiring configurations. From a process control perspective, the module performs binary state conversion from field contact inputs into scan-cycle synchronized logic signals within the DCS input image table. The 18 to 26.4 VDC ON threshold window and 5 VDC OFF threshold define the electrical discrimination band for stable contact state detection under varying loop resistance conditions. The KS cable interface option (ATD5A-00) allows structured 32-channel aggregation, while maintaining independent channel electrical paths and preserving isolation characteristics. Frequently Asked Questions Q: Can the module be hot-swapped while field wiring is energized?A: Backplane insertion capability depends on rack design. Field inputs should be de-energized to avoid transient coupling into input sensing circuits. Q: Does each channel operate independently?A: Each channel is individually isolated at the input sensing stage; however, common grouping exists every 16 channels for withstand voltage structure. Q: Does response time vary with input wiring method?A: Response time (8 ms or less) is defined by internal filtering and scan-cycle synchronization and is not affected by external termination type. Field Installation Guidelines Install the module into a compatible Yokogawa ADV151 series I/O rack ensuring full backplane connector engagement. Maintain correct polarity for 24 VDC field wiring to prevent reverse bias stress on input detection circuits. Use twisted pair wiring for long distance digital input runs and ensure shield continuity is terminated at a single-point cabinet ground. Separate input wiring from power and relay output cabling to reduce inductive coupling. Pressure clamp and cable interface connections (AKB331 / MIL / KS adapter) must be mechanically secured to maintain stable contact resistance under vibration conditions.
$200.00 $100.00
-
Yokogawa ADV151-P10/B5S10 Yokogawa Digital Input Module & Technical Manual
Yokogawa ADV151-P10/B5S10 Digital Input Module The Yokogawa ADV151-P10/B5S10, also cataloged as the ADV151 Digital Input Module, serves as a 32-channel isolated 24 VDC discrete signal acquisition unit for binary field contact interfacing within Yokogawa DCS input subsystem architectures. Configured for per-channel optical isolation and structured terminal wiring via pressure clamp interface, the Yokogawa ADV151-P10/B5S10 (ADV151 Digital Input Module) provides direct electrical state sampling from ON/OFF field devices into controller scan logic. Suffix Breakdown & Model Matrix ADV151: 32-channel, 24 VDC isolated digital input base module P: Pushbutton input function enabled 10: Standard configuration variant B5S10: Pressure clamp terminal block with surge absorber option Hardware Specifications Parameter Specification ModelBrand Yokogawa ADV151-P10/B5S10 Origin Japan PowerConsumption Max 5 VDC backplane, 500 mA Input Channels 32 isolated channels Input Voltage Range 24 VDC Input ON Voltage 18 to 26.4 VDC Input OFF Voltage 5 VDC or less Input Current 4.1 mA +/-20 percent per channel Max Allowable Input Voltage 30 VDC Withstanding Voltage 2 kV AC (input to system, 1 min), 500 VAC (common groups) Response Time 8 ms or less Terminal Type Pressure clamp terminal block Channel-to-Channel Isolation and 4-20 mA Field Interface Conditioning (DCS Input Architecture) The ADV151 input stage implements channel-level isolation for 24 VDC discrete signal acquisition, with each input routed through isolated sensing circuitry prior to backplane digitization. The architecture prevents electrical coupling between adjacent channels under dense termination conditions. From a process control instrumentation perspective, the module translates discrete field contact states into scan-cycle synchronized binary values within the DCS input image table. Surge-absorbing terminal configuration (B5S10) introduces transient suppression at the wiring interface, reducing voltage spike propagation into internal input stages during inductive switching events. Channel threshold discrimination is defined by ON/OFF voltage windows (18 to 26.4 VDC for ON, 5 VDC or less for OFF), ensuring stable state recognition under variable field loop impedance conditions. Frequently Asked Questions Q: Can the module tolerate backplane hot insertion while field wiring remains energized?A: The module supports backplane insertion depending on rack design, but field terminals should not be energized during insertion to avoid transient coupling into input circuitry. Q: What defines the 8 ms response time behavior?A: The response time is determined by internal input filtering and scan-cycle synchronization, limiting high-frequency contact bounce interpretation. Q: Does surge absorber configuration affect channel isolation?A: The surge absorber is applied at terminal interface level and does not alter internal channel-to-channel optical isolation structure. Field Installation Guidelines Install the module into a compatible Yokogawa ADV151 I/O base ensuring full seating into the backplane connector. Maintain correct polarity for 24 VDC input wiring to avoid reverse bias stress on input detection circuits. Use twisted pair wiring for long input runs and ensure shield continuity is terminated at a single-point cabinet earth reference. Pressure clamp terminals must be tightened to specified mechanical retention force to maintain stable contact resistance. Separate high-voltage switching cables from low-level signal wiring to minimize inductive coupling into adjacent input channels.
$200.00 $100.00
-
Yokogawa ADV151-P53/D5A00 Yokogawa Digital Input Module & Technical Manual
Yokogawa ADV151-P53/D5A00 Digital Input Module The Yokogawa ADV151-P53/D5A00, also cataloged as the ADV151 Digital Input Module, serves as a discrete 24 VDC signal acquisition interface for binary field contact states within Yokogawa DCS I/O subsystem architectures. Configured for isolated channel-level input scanning and KS cable interface termination, the Yokogawa ADV151-P53/D5A00 (ADV151 Digital Input Module) provides direct electrical state capture from pushbutton and dry contact devices into controller-level digital processing logic. Suffix Breakdown & Model Matrix ADV151: 32-channel, 24 VDC isolated digital input base module P: Pushbutton input configuration enabled 5: No status display, no explosion protection variant 3: ISA G3 environmental specification with -20 degC to 70 degC operating class /D5A00: KS cable interface adapter option for 32-channel digital input (ATD5A-00) Hardware Specifications Parameter Specification ModelBrand Yokogawa ADV151-P53/D5A00 Origin Japan OperatingTemp -20 degC to 70 degC PowerConsumption Backplane powered (not specified) Channels 32 channels Input Voltage 24 VDC Isolation Channel isolated digital input Interface Type KS cable adapter (ATD5A-00) Channel Isolation and 24 VDC Input Scanning Architecture The ADV151 platform implements optically isolated input stages per channel for 24 VDC discrete signal acquisition. Each input channel is sampled through internal conditioning circuits that decouple field wiring potential from backplane logic domains, reducing cross-channel electrical interaction under high-density termination conditions. In DCS scan-cycle execution, input state transitions are synchronized with controller polling intervals, allowing deterministic mapping of field contact status into system logic registers. The KS cable interface (ATD5A-00) defines structured multi-channel wiring aggregation, reducing terminal density at the module face while preserving per-channel electrical separation. Frequently Asked Questions Q: Does the module support hot swapping during energized backplane operation?A: Hot swapping depends on the Yokogawa I/O rack configuration. Field wiring should be de-energized prior to module insertion to prevent transient coupling into input circuits. Q: Are all 32 channels fully independent in signal detection?A: Each channel is individually isolated at the input stage; however, reference grounding is defined at system common potential. Q: What is the role of the KS cable interface adapter?A: The ATD5A-00 adapter consolidates 32-channel wiring into structured cable termination while maintaining individual channel electrical paths. Field Installation Guidelines Install the module into a compatible Yokogawa ADV151-series I/O base ensuring full engagement with the backplane connector. Maintain correct 24 VDC polarity across field input terminals to avoid reverse bias stress on input opto-couplers. Use shielded twisted pair wiring for long input runs, with shield termination performed at single-point cabinet earth only. Ensure KS cable interface connections are fully seated and mechanically locked to prevent intermittent contact resistance under vibration conditions.
$200.00 $100.00
You have seen 312 out of 594 products