Yokogawa Electric provides advanced automation solutions for process control and safety. Its product range includes CENTUM VP DCS, ProSafe-RS safety systems, and spare parts. Yokogawa technology ensures reliable operation, long-term system support, and optimized performance across industries worldwide.
Yokogawa Electric
-
Yokogawa Yokogawa SEC401-11 Bus Coupler Modules | ESB Bus System
Yokogawa SEC401-11 ESB Bus Coupler Module Configured for ESB backplane inter-module communication in CENTUM distributed control architecture, the Yokogawa SEC401-11 (SEC401-11 ESB Bus Coupler Module) provides direct physical/electrical execution for bus master interface coupling across ESB network segments. SuffixBreakdown & Model Matrix SEC401-11: Standard ESB Bus Coupler Module with bus master interface functionality -5: Standard type, no explosion protection -E: Standard type with explosion protection Hardware Specifications Parameter Specification ModelBrand Yokogawa SEC401-11 Origin Japan Weight Approx. 0.24 kg PowerConsumption 0.5 A Max Connectable Units 9 modules Transmission Speed 128 Mbps (I/O data) Max Transmission Distance 10 m Interface Type ESB Bus Coupler (Bus Master Function) Yokogawa ESB Backplane Communication Characteristics The SEC401-11 operates within Yokogawa ESB backplane architecture, supporting deterministic module-to-module data exchange across high-speed internal control networks. Within Yokogawa DCS ecosystems, ESB bus topology is typically associated with structured I/O distribution and channel-level signal organization. The coupler provides controlled synchronization of module frames over short-distance backplane segments, ensuring timing alignment for process I/O aggregation. In extended system configurations, ESB bus coupling behavior is aligned with industrial process control requirements such as 4-20 mA signal mapping layers, fieldbus integration layers, and structured I/O segmentation across redundant controller nodes. Frequently Asked Questions Q1: Can the SEC401-11 operate with hot-swappable ESB modules?A1: The module behavior depends on system configuration; ESB backplane systems typically require controlled insertion procedures to avoid bus frame interruption and synchronization loss. Q2: What limits the maximum number of connectable units?A2: The limit of 9 units is defined by ESB bus electrical loading, timing constraints, and backplane signal integrity margins. Q3: Does transmission distance affect bus timing stability?A3: Yes. At extended ESB coupling distances up to 10 m, signal propagation delay and bus arbitration timing must remain within system tolerance thresholds. Field Installation Guidelines Install the SEC401-11 on a grounded ESB backplane rail assembly. Ensure connector alignment is fully seated to maintain bus continuity across adjacent modules. Avoid mechanical stress on bus coupling interfaces during insertion. Shield grounding must be maintained at cabinet frame level to minimize electromagnetic coupling interference across high-speed backplane traces. Do not exceed rated module population per ESB segment to preserve deterministic communication timing.
$200.00 $100.00
-
Yokogawa Yokogawa AIP502 V-Net Coupler Module
Yokogawa AIP502 V-Net Coupler Module The Yokogawa AIP502, also cataloged as the AIP502 V-Net Coupler Module, operates as a dedicated hardware component for data communication coupling between Yokogawa field control units (FCUs) and V-NET network devices within distributed control system architectures. The Yokogawa AIP502 (AIP502 V-Net Coupler Module) provides direct physical and electrical execution for multi-protocol network bridging via RJ45-based Ethernet connectivity, supporting deterministic process data exchange. Hardware Specifications Parameter Specification ModelBrand Yokogawa AIP502 Origin Not specified Weight 0.6 kg Dimensions 15.2 cm x 7.6 cm x 25.4 cm Communication Speed Up to 100 Mbps Interface Type RJ45 Ethernet ports Supported Protocols Ethernet/IP, Modbus TCP, PROFINET IO, EtherCAT Channel-to-Channel Signal Conditioning and Fieldbus Integration The Yokogawa V-Net coupler architecture implements process data exchange behavior consistent with distributed control system communication layers, including 4-20 mA HART loop protocol handling and FOUNDATION Fieldbus / Profibus PA connectivity mapping at the system integration level. Internal signal routing is designed to maintain channel isolation between FCU backplane communication domains and external Ethernet-based industrial networks, limiting cross-domain electrical interference during continuous operation. Frequently Asked Questions Q: Does the AIP502 support hot-swapping during FCU operation?A: Hot-swap capability is not specified for this module. Removal or insertion should be performed under de-energized system conditions to avoid backplane communication disruption. Q: What is the expected backplane communication load impact?A: The module functions as a V-NET coupler; backplane load is dependent on FCU configuration. No fixed current or load value is defined in available specifications. Q: Can firmware be upgraded via Ethernet interface?A: Firmware upgrade mechanism is not explicitly defined. If supported, it is typically executed through FCU-level maintenance tools rather than direct module-level flashing. Field Installation Guidelines The AIP502 module shall be installed on a compatible Yokogawa FCU rack with secure mechanical seating on the backplane connector. RJ45 Ethernet ports must be routed using shielded twisted pair cabling with controlled bend radius to prevent impedance mismatch. Cable shields should be terminated at a single-point earth reference to minimize ground loop formation. Maintain separation between V-NET communication lines and power conductors to reduce electromagnetic coupling. Ensure system power is fully isolated prior to insertion or removal.
$200.00 $100.00
-
Yokogawa ESB Bus Coupler Modules | EC401-11 | Yokogawa
Yokogawa EC401-11 ESB Bus Coupler Module The Yokogawa EC401-11 also cataloged as the EC401-11 ESB Bus Coupler Module operates as a dedicated hardware component for communication routing between Field Control Unit (FCU) and Node Unit within ESB bus network. Configured for deterministic inter-module data exchange in ESB backplane architecture, the Yokogawa EC401-11 (EC401-11 ESB Bus Coupler Module) provides direct electrical interface and protocol-level coupling between distributed N-IO/FIO node structures and the central control station over ESB bus topology. Suffix Breakdown & Model Matrix EC401-11: ESB Bus Coupler Module base model for N-IO / FIO systems -0: Basic type configuration -1: ISA Standard G3 option enabled variant -5: Standard type without explosion protection -E: Standard type with explosion protection option Hardware Specifications Parameter Specification ModelBrand Yokogawa EC401-11 Origin Not specified Weight 0.24 kg PowerConsumption 0.5 A Max Connectable Nodes Up to 9 units Transmission Speed 128 Mbps Transmission Distance Up to 10 m Interface ESB Bus (FCU to Node Unit) ESB Bus Communication Architecture Characteristics The EC401-11 implements ESB bus coupling for modular distributed I/O segmentation in Yokogawa control systems. The interface supports synchronized backplane-level communication timing between FCU and node assemblies. ESB transmission layer behavior is aligned with cyclic process data exchange requirements, enabling structured node expansion up to defined hardware limits. Electrical and logical separation between FCU and node domains is maintained through dedicated bus coupling logic, ensuring controlled propagation of process data frames across ESB segments under fixed-speed transmission conditions. Frequently Asked Questions Q: Can the EC401-11 be hot-swapped during ESB bus operation?A: Hot-swap capability depends on system configuration and FCU state. In typical ESB architecture, module replacement requires controlled shutdown of the affected node segment. Q: What is the maximum node loading on a single EC401-11 module?A: Up to 9 connectable node units are supported under standard ESB bus configuration limits. Q: Does transmission speed remain constant under full node utilization?A: The module operates at a fixed 128 Mbps ESB transmission rate; throughput is governed by system cycle load and node communication scheduling. Field Installation Guidelines Ensure FCU power is isolated before insertion or removal of EC401-11 module Maintain ESB bus cable routing within specified 10 m maximum transmission distance Avoid signal line bundling with high voltage or VFD output cabling to reduce electromagnetic interference coupling Verify correct node addressing prior to system commissioning Use proper grounding practices for ESB backplane shielding continuity Confirm module seating alignment on rack connector to avoid intermittent bus faults
$200.00 $100.00
-
Yokogawa ESB Bus Coupler Modules | SEC402-51 | Yokogawa
Yokogawa SEC402-51 ESB Bus Coupler Module Configured for ESB bus data exchange between safety control units and safety node units in ProSafe-RS safety system architectures, the Yokogawa SEC402-51 (SEC402 ESB Bus Coupler Module) provides direct physical backplane-to-field node communication via dual ESB bus interfaces mounted on dedicated controller slots. The module operates as a dual-port ESB bus master interface, managing cyclic I/O data transmission between safety control unit S2SC70£ / SSC60£ and distributed safety node units through upper and lower ESB trunk segments. Hardware Specifications Parameter Specification ModelBrand Yokogawa SEC402-51 Origin Japan Weight Approx. 0.24 kg PowerConsumption 0.5 A Core Function ESB Bus Coupler / ESB bus master interface Transmission Speed 128 Mbps (I/O data transmission) Max Node Capacity Up to 9 units per upper/lower side (standard), up to 12 with star connection (R4.04 or later) Transmission Distance Max 10 m per ESB bus segment Mounting Position Slots 7 and 8 of safety control unit ESB Bus Architecture Characteristics (Yokogawa Safety Network Layer) Yokogawa ESB bus architecture implements deterministic cyclic data transfer between safety controller backplane and distributed node I/O units using dual-channel ESB segmentation (upper/lower bus paths). The SEC402-51 functions as the physical bus master, scheduling frame-level synchronization and enforcing node scan consistency across safety I/O modules such as SNB10D and SNT4££ series. The ESB communication layer is engineered for fixed-cycle deterministic exchange, with separation of upper and lower bus domains to reduce cross-segment traffic coupling. In star topology mode (S2SC70S / S2SC70D with R4.04+), node expansion logic extends to 12 units per segment, requiring strict adherence to ESB cable length constraints and termination impedance matching across distributed node branches. Frequently Asked Questions Q: Can the SEC402-51 operate in hot-swap conditions?A: Module replacement is not intended under energized ESB bus conditions. Bus synchronization requires controller-level reinitialization after physical replacement. Q: What limits ESB bus node expansion per segment?A: Node count is constrained by ESB master scan cycle timing and electrical loading. Standard configuration supports 9 nodes per side; extended star topology supports up to 12 nodes with firmware R4.04 or later. Q: Does the module isolate upper and lower ESB bus domains?A: Upper and lower ESB ports operate as logically separated bus channels, but share synchronized scan timing under a single ESB master scheduling mechanism. Field Installation Guidelines ESB Bus Coupler Modules shall be installed only in slot positions 7 and 8 of the designated safety control unit chassis. Ensure correct alignment of ESB backplane connectors prior to insertion to avoid signal misalignment on high-speed bus lanes. ESB cable routing must maintain separation between upper and lower bus segments. Cable length must not exceed 10 m per segment. Shield termination shall be grounded at one end only to prevent ground loop current injection into the bus reference plane. Avoid mechanical stress on ESB connectors during installation. Ensure all node units are powered down or placed in maintenance mode before coupling or decoupling ESB trunk lines.
$200.00 $100.00
-
Yokogawa EC401-10 Yokogawa ESB Bus Coupler Module
Yokogawa EC401 ESB Bus Coupler Module The Yokogawa EC401，also cataloged as the EC401 Bus Coupler Module, operates as a dedicated hardware component for ESB bus communication linking Field Control Units and Node Units within ESB bus architecture. It provides direct electrical and data execution for I/O module data exchange at high-speed backplane-to-bus interfacing. Hardware Specifications Parameter Specification ModelBrand Yokogawa EC401 Origin Not specified Weight Approx. 0.24 kg PowerConsumption 0.5 A Bus Function ESB bus interface function Transmission Speed 128 Mbps (I/O data transmission) Transmission Distance Max. 10 m Max Connectable Units Up to 9 units (ANB10S/ANB10D/ANT401/ANT411/ANT421) Slot Requirement Slot 7 (non-redundant), Slot 7+8 (dual-redundant) ESB Bus Architecture and DCS Communication Behavior Within Yokogawa distributed control environments, ESB bus coupling is aligned with deterministic field data exchange and channel-level synchronization typical of DCS backplane systems. The EC401 module operates as a physical bus interface element for high-speed module aggregation, supporting structured I/O segmentation and channel-to-node mapping. ESB bus topology maintains fixed latency characteristics over short-distance interconnects, ensuring stable module synchronization under multi-rack configurations. Frequently Asked Questions Q: Can the EC401 be hot-swapped during ESB bus operation?A: Hot-swap capability depends on system configuration and Field Control Unit design. ESB bus integrity must be maintained to avoid backplane communication interruption. Q: What is the impact of redundant installation on bus behavior?A: Dual-redundant configuration uses Slot 7 and Slot 8 installation, providing parallel ESB paths with failover switching logic managed at system level. Q: Does the EC401 impose limitations on node expansion?A: Yes. Maximum connectable node count is limited to 9 units across supported ANB and ANT series modules due to bus bandwidth and addressing constraints. Field Installation Guidelines Install EC401 in Slot 7 for non-redundant ESB bus configuration For redundancy, install a second unit in Slot 8 and ensure paired configuration alignment Use covered dummy module for unused slot in non-redundant setups Maintain ESB bus cable length within 10 m maximum transmission distance Ensure proper grounding of Field Control Unit chassis to reduce signal reference drift Verify compatibility with CP471 processor module (Style code S3 or later required)
$200.00 $100.00
-
Yokogawa AIP601 S1 Yokogawa Cabinet Cooling Fan Unit
Yokogawa AIP601 S1 Fan Unit Configured for thermal air circulation support in CENTUM component assemblies, the Yokogawa AIP601 (AIP601 Fan Unit) provides direct physical airflow execution for enclosure and module heat dissipation within CENTUM backplane-integrated hardware platforms. The AIP601 fan unit is designed as a replaceable cooling module installed in CENTUM system cabinets and field control hardware. It supports forced-air thermal regulation for controller, I/O expansion, and bus conversion assemblies, ensuring stable internal temperature distribution across V net and Vnet/IP architectures. Hardware Specifications Parameter Specification ModelBrand Yokogawa AIP601 S1 Origin Japan OperatingTemp As per CENTUM cabinet environmental design specification PowerConsumption Not specified in source documentation Function Cabinet forced-air cooling fan module Installation Location CENTUM field control unit / I/O cabinet / converter assemblies CENTUM Thermal Management Integration Characteristics The AIP601 fan unit is integrated into CENTUM cabinet-level airflow architecture, providing mechanical cooling for electronic modules operating under continuous backplane load conditions. Within the system thermal design, airflow is distributed across densely packed control and I/O assemblies to stabilize junction temperatures of processing and communication boards. From a system-level engineering perspective, fan operation supports steady-state thermal balance for backplane-mounted modules, particularly where continuous data exchange occurs over V net or Vnet/IP. The fan unit operates as a passive infrastructure component within the enclosure thermal loop, requiring no field configuration beyond installation and electrical connection to the cabinet power distribution. Frequently Asked Questions (FAQ) Q1: Can the AIP601 fan unit be hot-swapped during CENTUM operation?A1: Hot-swap capability depends on the specific cabinet design. In most CENTUM configurations, fan replacement is performed under controlled shutdown unless redundant fan assemblies are implemented. Q2: Does the fan unit interact electrically with backplane communication buses?A2: No. The AIP601 operates as a dedicated electromechanical cooling device and has no direct electrical interface with V net or Vnet/IP communication lines. Q3: What happens if airflow is reduced or blocked in the cabinet?A3: Reduced airflow increases internal module temperature, which may trigger system thermal protection or reduce long-term electronic component reliability within control and I/O modules. Field Installation Guidelines The fan unit shall be installed in designated cabinet ventilation slots according to CENTUM mechanical layout drawings. Ensure airflow direction matches enclosure design intake/exhaust paths. Maintain clearance from cable bundles to prevent obstruction of fan inlet or outlet paths. All wiring associated with fan power supply must follow cabinet grounding rules, with proper shielding and earth continuity to avoid induced noise on adjacent control modules. Dust filters, if present in the cabinet design, should be inspected periodically to maintain rated airflow performance. Do not operate the fan unit outside of specified enclosure mounting conditions, as unrestricted operation may result in reduced bearing life or unstable airflow distribution within the control cabinet.
$200.00 $100.00
-
Yokogawa AIP601 Yokogawa Cabinet Cooling Unit | Door Fan Unit
Yokogawa AIP601 Door Fan Unit Configured for forced cabinet airflow management in Vnet/IP based DCS enclosure architectures, the Yokogawa AIP601 (AIP601 Door Fan Unit) provides direct electrical and mechanical execution of airflow regulation through integrated fan control and monitoring circuitry within Yokogawa system cabinets. Suffix Breakdown & Model Matrix AIP601 is defined as a fixed single-order module identifier. No additional suffix segmentation or functional option coding is specified in the provided manufacturer data. Hardware Specifications Parameter Specification ModelBrand Yokogawa AIP601 Origin Yokogawa Rated Voltage 250 VAC, max 30 VDC Vnet/IP Interface Dual-redundant FCU 1 Power Distribution Board Built-in HKU, 1 unit I/O Modules Capacity Max 6 modules Battery Backup (Main Memory) Max 72 hours Detectable Flow Rate 2 to 20 (unit not specified) Process Control Cabinet Interface Characteristics The Yokogawa AIP601 integrates into Vnet/IP based control architectures with dual-redundant communication paths, supporting deterministic data exchange between cabinet-level monitoring nodes and distributed control system backplanes. In Yokogawa DCS environments, cabinet auxiliary devices such as fan units are commonly aligned with 4-20 mA loop monitoring principles and channel isolation design logic to ensure signal integrity across mixed analog and digital subsystem boundaries. The internal FCU and power distribution architecture supports segmented electrical distribution with built-in HKU coordination for internal load balancing and supervisory control signaling. Frequently Asked Questions Q: Does the AIP601 support hot-swapping of the FCU module?A: No explicit hot-swap capability is specified for FCU replacement. Power isolation is required before mechanical replacement. Q: What is the impact of dual-redundant Vnet/IP failure on fan operation?A: Fan operation is typically decoupled from network redundancy; however, monitoring and alarm signaling may degrade to single-path communication. Q: What is the maximum supported I/O expansion load?A: Up to 6 I/O modules are supported; backplane current loading must remain within cabinet power distribution limits. Field Installation Guidelines The AIP601 shall be installed within Yokogawa-compatible cabinet door assemblies with verified mechanical alignment of airflow intake and exhaust channels. Ensure proper grounding of the power distribution board chassis to cabinet earth to maintain noise suppression integrity across Vnet/IP communication lines. Maintain separation between AC power routing (250 VAC) and low-level communication wiring to avoid induced coupling. All wiring termination points should follow standard industrial torque specifications for terminal blocks, and cable shielding must be terminated at a single earth reference point to avoid ground loop circulation.
$200.00 $100.00
-
Yokogawa AIP571 Yokogawa Electrical Transceiver RIO I/O Module
Yokogawa AIP571 Electrical Transceiver RIO I/O Module The Yokogawa AIP571, also cataloged as the AIP571 Electrical Transceiver RIO I/O Module, operates as a dedicated hardware component for optical fiber based Remote I/O communication linking Field Control Units (FCU) and distributed RIO nodes within Yokogawa ESB bus architectures. Configured for electrical/optical signal transceiving in Remote I/O expansion networks, the Yokogawa AIP571 (AIP571 Electrical Transceiver RIO I/O Module) provides direct physical/electrical execution of deterministic data exchange between redundant RIO stations over fiber optic links, enabling FCU-level integration. Suffix Breakdown & Model Matrix AIP: Yokogawa Remote I/O / adapter platform designation 571: Electrical transceiver module variant for RIO fiber communication extension No additional suffix options are defined for this single-order hardware identifier Hardware Specifications Parameter Specification ModelBrand Yokogawa AIP571 Origin Japan (Yokogawa Electric Corporation) Communication Interface Optical fiber link for RIO / ESB bus extension System Role RIO transceiver / FCU communication interface Redundancy Support Dual-redundant ESB bus architecture support DCS Optical Fiber RIO Transceiver Architecture ESB Bus Optical Link Layer Implementation The AIP571 functions as a physical layer transceiver for Yokogawa ESB bus based RIO systems. It converts electrical backplane communication signals into optical transmission streams, enabling long-distance deterministic communication between FCU racks and distributed I/O nodes. Channel integrity is maintained through synchronized optical duplex paths, supporting redundant transmission routing where dual ESB paths operate in parallel. Signal timing alignment is preserved at the transceiver level to maintain RIO scan consistency. 4-20 mA Process Signal Aggregation via RIO Stack Within Yokogawa distributed control architectures, analog and discrete field signals (including 4-20 mA loops and digital contact inputs) are aggregated in RIO modules and forwarded via the AIP571 optical interface. The module itself does not perform signal conditioning but acts as a deterministic transport gateway to FCU processing layers. Channel-to-Fiber Isolation Boundary Electrical isolation is implemented between RIO backplane logic and optical transmission stage. This separation prevents ground loop propagation across remote cabinet installations and ensures stable signal integrity across long-distance fiber routes in multi-rack configurations. Frequently Asked Questions Q1: Can the AIP571 be hot-swapped during ESB bus operation?A1: The module is not designed for live replacement under energized ESB bus conditions. System shutdown or controlled rack isolation is required before insertion or removal. Q2: Does the AIP571 perform signal conversion for analog inputs?A2: No. It operates strictly as a communication transceiver. Analog/digital signal processing is handled by upstream RIO I/O modules. Q3: What is the maximum supported redundancy mode?A3: It supports dual-redundant ESB bus communication paths, maintaining parallel optical transmission channels for failover synchronization. Field Installation Guidelines Install module only in designated Yokogawa RIO rack slots compatible with ESB bus backplane architecture Ensure optical fiber polarity alignment before connection to prevent link initialization failure Maintain minimum bend radius for fiber cables to avoid signal attenuation Verify redundant channel pairing before system commissioning Ensure backplane connectors are fully seated to prevent intermittent communication faults Keep installation environment free from excessive dust or conductive contamination affecting optical interfaces
$200.00 $100.00
-
Yokogawa Yokogawa AIP521 Control Bus Coupler | Industrial Automation Modules
Yokogawa AIP521 Control Bus Coupler Configured for communication task execution in the Yokogawa CENTUM VP distributed control system network, the Yokogawa AIP521 (AIP521 Control Bus Coupler) provides direct physical/electrical execution of fieldbus-to-controller data exchange within VL-NET and VNET based DCS backplane architectures. Suffix Breakdown & Model Matrix AIP521 is treated as a single fixed-order module designation. No published suffix segmentation or variant encoding is specified in the provided dataset. Hardware Specifications Parameter Specification ModelBrand Yokogawa AIP521 Origin Japan Communication Interfaces VL-NET, VNET, Modbus, Profibus, DeviceNet Functional Role Control bus coupling between controller and field I/O network System Compatibility Yokogawa CENTUM VP DCS Fieldbus Arbitration and Channel Segmentation in Yokogawa DCS Architecture The AIP521 implements deterministic data exchange between controller-side communication layers and field device networks using segmented bus arbitration. In CENTUM VP architectures, VL-NET and VNET traffic scheduling is handled through cyclic exchange timing, where the coupler manages frame synchronization and data mapping between heterogeneous protocols such as Profibus DP and Modbus RTU. Channel separation is maintained at the logical bus level to prevent cross-domain signal contention within distributed control loops. Frequently Asked Questions Q: Does the AIP521 support hot-swapping in CENTUM VP systems?A: Hot-swap capability depends on the base rack and system configuration. The module itself does not define hot insertion behavior independently; backplane power sequencing governs safe replacement. Q: How is backplane communication handled under mixed protocol loads?A: The module maps fieldbus frames into CENTUM VP internal communication cycles. Timing is governed by system scan cycles rather than autonomous scheduling within the coupler. Q: Does the module perform electrical isolation between networks?A: Isolation is implemented at the system interface level according to CENTUM VP architecture rules. The coupler acts as a logical bridge rather than a full galvanic isolation boundary. Field Installation Guidelines Install the AIP521 into the designated CENTUM VP I/O rack slot with system power disabled. Ensure backplane connector alignment before full insertion to avoid pin stress. Fieldbus cables (Modbus, Profibus, DeviceNet) must be routed with shield continuity maintained and grounded at a single-point earth reference. Avoid parallel routing with high-voltage power lines to reduce electromagnetic coupling. Confirm VL-NET/VNET addressing consistency prior to system startup to prevent communication mapping conflicts.
$200.00 $100.00
-
Yokogawa Digital IO Modules | AIP444 S1 Yokogawa DCS Module
Yokogawa AIP444 S1 Hard Disk Module The Yokogawa AIP444S1, also cataloged as the AIP444S1 Hard Disk Module, operates as a dedicated hardware component for digital data storage and process data handling within Yokogawa DCS I/O and control infrastructure. It provides direct electrical interface for controller-side memory buffering and communication exchange. Suffix Breakdown & Model Matrix No validated suffix segmentation or internal ordering matrix information is provided in the supplied source data for AIP444S1. No decomposition is applied. Hardware Specifications Parameter Specification Model AIP444 S1 Brand Yokogawa Origin Not specified in provided data Weight approx 0.6 kg Dimensions Compact, space-saving design (exact values not specified) OperatingTemp -10 degC to +60 degC PowerConsumption Not specified Input Voltage 24 VDC Output Voltage 24 VDC Digital I/O Capacity 16 Inputs / 16 Outputs Communication Interfaces Ethernet, RS-485 Memory Capacity 256 KB Yokogawa Process Control Communication & Loop Integration Behavior The Yokogawa AIP444S1 module integrates into process control architectures using deterministic data exchange between controller memory and field-level I/O mapping tables. Within Yokogawa DCS environments, 4-20 mA signal conditioning layers may be logically mapped through internal channel registers, while communication stacks support Ethernet-based supervisory polling and RS-485 serial field interfacing. Channel-level data consistency is maintained through buffer synchronization cycles between memory segments (256 KB address space) and I/O refresh tasks. In mixed protocol environments, HART superimposed signal interpretation and field device parameterization can be routed through higher-level controller interfaces when applicable. Frequently Asked Questions Q: Does the AIP444S1 support hot-swap operation in running systems?A: Hot-swap capability depends on rack and backplane design. The module itself performs memory retention on controlled shutdown but does not define hot-swap behavior independently. Q: What is the backplane load requirement for the 24 VDC supply?A: Backplane current consumption is not specified in the provided documentation. Power distribution must follow Yokogawa rack-level electrical design limits. Q: Can firmware or memory content be updated via Ethernet interface?A: Firmware and memory operations depend on controller-level management tools. The module provides Ethernet communication but does not independently define upgrade mechanisms. Field Installation Guidelines Install the AIP444S1 module only in compatible Yokogawa rack systems with verified 24 VDC supply stability. Ensure all I/O wiring for the 16 input and 16 output channels follows standard industrial shielding and grounding practices to minimize electromagnetic coupling on Ethernet and RS-485 lines. Maintain separation between communication cabling and power conductors. RS-485 lines should be terminated with appropriate impedance matching at network endpoints to avoid signal reflection. The module should be inserted into the rack with power removed unless the system design explicitly supports live insertion.
$200.00 $100.00
-
Yokogawa Yokogawa AIP434 S1 Data Storage Module Hard Drive Moudle
Yokogawa AIP434 S1 Hard Disk Module Configured for persistent data buffering in CENTUM CS and CENTUM VP process control environments, the Yokogawa AIP434 S1 (AIP434 S1 Hard Disk Module) provides direct physical storage execution for configuration datasets, historical process records, and alarm/event logs. HardwareSpecifications Parameter Specification ModelBrand Yokogawa AIP434 S1 Origin Not specified Weight Approx. 1.3 kg Dimensions Approx. 5.1 cm × 25.4 cm × 25.4 cm StorageType Industrial hard disk module OperatingVoltage 24 VDC SystemCompatibility Yokogawa CENTUM CS / CENTUM VP Installation Form Rack-mounted module Process Control Data Storage Architecture The Yokogawa AIP434 S1 is aligned with DCS-level storage interfacing, supporting data exchange patterns consistent with 4-20 mA HART loop environments and higher-layer process data abstraction. Within CENTUM architectures, storage modules of this class interface with system controllers where FOUNDATION Fieldbus and PROFIBUS-based subsystems aggregate process variables, requiring synchronized logging of time-stamped data streams. Channel-to-channel isolation principles are applied at the system integration level to prevent data corruption between parallel acquisition paths. Storage execution is optimized for deterministic write cycles associated with alarm/event recording and batch history retention. Frequently Asked Questions Q: Does the module support hot-swap replacement under system power?A: The module is described as hot-swappable; however, actual replacement behavior depends on CENTUM system redundancy configuration and controller-level disk arbitration logic. Q: What type of system data is written to the hard disk module?A: It stores process history, alarm logs, system configuration datasets, and event records generated by CENTUM CS / CENTUM VP controllers. Q: Is there a defined data throughput limitation for backplane transfer?A: No explicit throughput specification is provided; transfer rate is governed by the host DCS backplane architecture and controller scheduling cycle. FieldInstallationGuidelines The module shall be installed in a compatible Yokogawa rack enclosure with verified backplane alignment. Ensure all edge connectors are fully seated before applying 24 VDC supply. Avoid mechanical stress on the drive carrier during insertion or removal. Signal and power cabling shall be separated from high-noise conductors to maintain data integrity within the rack assembly. Grounding shall follow the cabinet equipotential bonding scheme to minimize transient coupling across storage interfaces.
$200.00 $100.00
-
Yokogawa AIP423 S1 Yokogawa Communication Module DCS Rack
Yokogawa AIP423 S1 Communication Module The Yokogawa AIP423 S1 also cataloged as the AIP423 S1 Communication Module, operates as a dedicated hardware component for cyclic and acyclic data exchange within Yokogawa Distributed Control System (DCS) backplane and field communication architecture. Suffix Breakdown & Model Matrix AIP423 S1 is treated as a single ordered module designation. No validated sub-suffix segmentation or functional split information is provided in the source data; therefore, no structural decomposition is applied. Hardware Specifications Parameter Specification ModelBrand Yokogawa AIP423 S1 Origin Japan (Yokogawa manufactured DCS module series) Weight Approximately 1 kg (as provided) Dimensions 19-inch rack-mount compatible form factor OperatingTemp -10 degC to 60 degC (specified) PowerConsumption Not specified Communication Protocol V-net; possible Ethernet or proprietary Yokogawa protocols Data Transfer Rate Up to 100 Mbps (specified) Interface Type DCS backplane / multi-module system bus DCS Communication Protocol and Fieldbus Interaction Layer The AIP423 S1 implements process control communication layering consistent with Yokogawa DCS architecture, supporting V-net deterministic messaging and optional Ethernet-based supervisory data exchange. Within the module communication stack, process variables and control words are mapped into cyclic scan frames with timing alignment to controller scan cycles. The module is designed to maintain signal integrity under industrial EMI conditions through controlled impedance routing and backplane synchronization logic. A typical Yokogawa process control implementation may integrate field-level 4-20 mA loops and HART-enabled instruments, where upstream conversion and routing are handled via communication modules such as AIP423 S1. Channel-to-channel electrical isolation is typically implemented at system level depending on base unit configuration, ensuring segmentation between control domains and communication segments. Frequently Asked Questions Q: Can the AIP423 S1 support hot-swapping during system operation?A: Hot-swap capability depends on the host DCS base unit architecture. The module itself interfaces through a backplane connection and does not independently define power isolation behavior. Q: Does the module introduce latency in V-net communication cycles?A: Communication latency is determined by system scan cycle timing and backplane arbitration. The module operates within deterministic scan scheduling defined by the DCS controller. Q: Is firmware upgrade handled directly through this module?A: Firmware management is executed at system controller level. The module functions as a communication node and does not independently host upgrade execution logic. Field Installation Guidelines Install the module only into a compatible Yokogawa DCS rack backplane slot with confirmed keying alignment. Ensure system power is isolated before insertion or removal. Maintain correct grounding of the rack chassis to reduce electromagnetic interference coupling across V-net communication lines. Avoid routing high-voltage or high-frequency cabling parallel to backplane communication harnesses to minimize induced noise. Verify seating integrity through full connector engagement along the backplane interface.
$200.00 $100.00
-
Yokogawa Yokogawa AAI143-S50/A4S00 Analog Input Module-16-channel
Yokogawa AAI143-S50/A4S00 Analog Input Module Configured for analog current acquisition in CENTUM VP signal conditioning architecture, the Yokogawa AAI143-S50/A4S00 (AAI143 Analog Input Module) provides direct physical/electrical execution for 4-20 mA field signal conversion into isolated DCS input channels. Hardware Specifications Parameter Specification Model AAI143-S50/A4S00 Brand Yokogawa Origin Japan Input Type 4-20 mA Analog Current Channel Count 16 channels Isolation Channel-to-channel isolated inputs System Compatibility Yokogawa CENTUM VP Process Control Signal Acquisition Characteristics The Yokogawa AAI143 series is architected for distributed process signal acquisition within DCS environments, with emphasis on channel separation integrity. The module implements channel-to-channel electrical isolation to reduce ground loop interaction in multi-loop analog field wiring. 4-20 mA loop interfaces are terminated at the input stage and digitized for backplane transmission into the control system processing layer. Signal conditioning supports stable conversion behavior under standard industrial current loop loading conditions. Frequently Asked Questions Q: Does the AAI143-S50/A4S00 support hot-swap replacement in a live rack?A: Hot-swap capability depends on system rack design and backplane configuration. Electrical loop interruption behavior must be evaluated at cabinet level. Q: Are all input channels galvanically isolated from each other?A: The module is designed with channel-to-channel isolation architecture to minimize interference between individual 4-20 mA loops. Q: What is the backplane communication method used?A: Signal data is transmitted through the Yokogawa DCS backplane to the CPU/communication module according to system bus architecture. Field Installation Guidelines Maintain correct polarity for all 4-20 mA loop terminations at the ATA4S-00 terminal block interface. Shielded twisted pair wiring is recommended for all analog input loops, with shield termination performed at a single cabinet ground reference point to avoid circulating currents. Ensure adequate torque is applied to pressure clamp terminals to maintain stable low-impedance contact. Avoid routing analog input wiring parallel to high-voltage or switching load conductors to minimize induced noise coupling.
$200.00 $100.00
-
Yokogawa AAI543-H00/A4S00 Yokogawa Analog Input Module 16CH 4-20mA
Yokogawa AAI543-H00/A4S00 Analog Input Module The Yokogawa AAI543-H00/A4S00, also cataloged as the AAI543 Analog Input Module, serves as the primary AAI543 16-channel Analog Input Module utilized to execute 4-20 mA signal acquisition across CENTUM VP and ProSafe-RS platforms. Configured for real-time analog current acquisition in CENTUM VP I/O sub-systems, the Yokogawa AAI543-H00/A4S00 (AAI543 Analog Input Module) provides direct electrical execution of isolated multi-channel measurement for distributed control input processing. Suffix Breakdown & Model Matrix AAI543: Base 16-channel isolated analog input module H00: High-speed variant designation A4S00: Optional terminal block configuration (ATA4S-00 pressure clamp type) O: Basic type, no explosion protection Hardware Specifications Parameter Specification ModelBrand Yokogawa AAI543-H00/A4S00 Origin Japan Weight 0.3 kg Input Channels 16 isolated channels Input Signal 4-20 mA DC Isolation Channel-to-channel and channel-to-system isolation System Compatibility CENTUM VP, ProSafe-RS Update Period High-speed sampling (exact value not specified) Terminal Type Pressure clamp (optional ATA4S-00) 4-20 mA Loop Acquisition and Channel Isolation Behavior Within Yokogawa process I/O architecture, the AAI543 series implements per-channel galvanic isolation to prevent loop interaction across adjacent current input lines. The 4-20 mA acquisition stage performs direct current sensing with isolated conversion stages per channel, reducing cross-channel coupling during high-density analog sampling. The module integrates into distributed control racks via backplane communication, where input scaling and digitization are synchronized with controller scan cycles. Signal integrity is maintained under mixed loop wiring conditions where field return paths are independently referenced per channel. Frequently Asked Questions Q: Does the AAI543 support hot-swap replacement during operation?A: Hot-swap capability depends on system rack configuration. Electrical isolation is maintained at channel level, but backplane insertion should follow system shutdown procedures unless supported by the host node. Q: Are all 16 channels fully isolated from each other?A: Yes. Each input channel is electrically isolated, preventing loop interference and ground potential differences between field signals. Q: Can the module directly accept voltage inputs instead of 4-20 mA?A: No. The input stage is designed specifically for 4-20 mA current loop signals and does not support direct voltage measurement without external conversion. Field Installation Guidelines Ensure 24 VDC loop power integrity before field termination Maintain shield grounding at a single point per signal cable to avoid ground loops Avoid routing analog input wiring parallel to high-voltage or inverter lines Verify correct seating of terminal block (ATA4S-00) before energizing I/O rack Confirm channel mapping consistency in CENTUM VP configuration prior to commissioning Use twisted shielded pair cabling for all 4-20 mA loops to minimize EMI coupling
$200.00 $100.00
-
Yokogawa SAI143-H53/A4D00 Yokogawa Analog Input Module | 16-Channel Input
Yokogawa SAI143-H53/A4D00 Analog Input Module TheYokogawa SAI143-H53/A4D00(SAI143 Analog Input Module) serves as the primary analog current input unit utilized to execute 4-20 mA signal acquisition across field instrumentation channels within CENTUM-style DCS I/O architectures. It provides direct electrical termination and digitization of multi-channel process current loops with integrated HART communication support. Suffix Breakdown & Model Matrix SAI143: Analog input module series, 16-channel 4-20 mA input H: HART communication enabled (R1.02.00) 5: Pressure clamp terminal block / MIL cable configuration, no explosion protection 3: ISA G3 environmental specification, operating range -20 degC to 70 degC /A4D00: Dual-redundant pressure clamp terminal block option for analog wiring interface Hardware Specifications Parameter Specification ModelBrand Yokogawa SAI143-H53/A4D00 Origin Japan OperatingTemp -20 degC to 70 degC PowerConsumption N/A Input Signal 4-20 mA DC Channel Count 16 channels Communication HART protocol enabled Isolation Channel-to-channel isolation (design dependent) Terminal Type Dual-redundant pressure clamp terminal block DCS Analog Loop Acquisition Characteristics (Yokogawa Process Interface Design) The module implements 4-20 mA loop acquisition with embedded HART superimposed digital communication decoding, allowing simultaneous analog value conversion and field device parameter access. Channel architecture is structured to minimize inter-channel coupling, supporting stable current loop sampling under mixed signal load conditions. Isolation topology is aligned with Yokogawa distributed control input rack design, reducing ground potential interaction across field wiring groups. HART carrier detection is processed per channel without external multiplexing hardware. Frequently Asked Questions Q1: Does the module support simultaneous analog and HART communication?A1: Yes. The module decodes HART FSK signals superimposed on 4-20 mA loops while maintaining analog conversion per channel. Q2: Are channels independently isolated?A2: The design supports channel-to-channel isolation architecture depending on internal configuration and system backplane implementation. Q3: Can the module operate in redundant wiring configurations?A3: The /A4D00 option provides dual-redundant terminal block structure for analog field termination redundancy. Field Installation Guidelines Maintain shield termination at designated grounding point to avoid loop noise injection Ensure 4-20 mA loop polarity consistency across all 16 channels Avoid routing HART-capable loops parallel to high-voltage conductors Confirm terminal torque specification for pressure clamp connectors prior to energization Verify isolation resistance between channels and backplane before commissioning
$200.00 $100.00
-
Yokogawa AAI135-H00/K4A00 Yokogawa Analog Input Module-8-channel
Yokogawa AAI135-H00/K4A00 Analog Input Module TheYokogawa AAI135-H00/K4A00，also cataloged as theAAI135Analog Input Module, operates as a dedicated hardware component for 4-20 mA current signal acquisition within DCS analog input processing networks. Configured for field current loop termination and HART superimposed digital communication decoding, theYokogawa AAI135-H00/K4A00(AAI135Analog Input Module) provides direct physical/electrical execution. Suffix Breakdown & Model Matrix AAI135: Base model, 8-channel isolated 4-20 mA analog input module H00: Basic configuration set with HART communication support enabled via module interface K4A00: KS cable interface adapter option, compatible with ATK4A-00 termination assembly Hardware Specifications Parameter Specification ModelBrand Yokogawa AAI135-H00/K4A00 Origin Japan Weight 0.3 kg Input Signal 4-20 mA Channels 8-channel, isolated Allowable Input Current 25 mA Withstanding Voltage 500 V AC (input-system, 1 min); 500 V AC (channel-channel, 1 min) Input Resistance 290 ohm (20 mA, power ON) to 450 ohm (4 mA, power ON); >= 500 k ohm (power OFF) Accuracy +/- 16 uA Communication HART protocol overlay supported Process Signal Conditioning and HART Loop Handling The module implements HART protocol superimposition on 4-20 mA analog loops, enabling simultaneous analog measurement and digital field device communication without signal separation hardware. Channel-to-channel galvanic isolation reduces inter-channel electrical coupling under mixed-loop termination conditions, maintaining stable current acquisition across all 8 inputs in dense I/O configurations. Frequently Asked Questions Q: Does the module support hot-swap replacement under live backplane power?A: Hot-swap capability depends on system rack design; electrical isolation is maintained per channel, but backplane behavior is system-defined. Q: What is the effect of HART communication on 4-20 mA measurement accuracy?A: HART signal is superimposed at low amplitude frequency; analog current measurement remains within specified +/- 16 uA accuracy band. Q: Can unused channels be left open-circuit?A: Open channels should follow termination guidelines to avoid noise pickup; input resistance in power OFF state is >= 500 k ohm. Field Installation Guidelines Maintain correct polarity for each 4-20 mA loop connection at terminal interface Use shielded twisted pair wiring for all analog input channels Ground cable shields at a single-point earth reference to avoid ground loop currents Ensure KS cable interface adapter ATK4A-00 is fully seated before energizing system Avoid routing analog input wiring parallel to high-voltage or switching power lines Verify channel isolation integrity before commissioning multi-loop installations
$200.00 $100.00
-
Yokogawa ADV151-P00/D5A00 Yokogawa Digital Input Module FIO System
Yokogawa ADV151-P00/D5A00 Digital Input Module Configured for ON/OFF discrete signal acquisition in FIO-based distributed I/O architectures, the Yokogawa ADV151-P00/D5A00 (ADV151 Digital Input Module) provides direct electrical execution of 24 VDC field input conditioning within Yokogawa field control station environments. Suffix Breakdown & Model Matrix ADV151: Base model digital input module, 32-channel architecture -P00: Standard hardware configuration variant /D5A00: Interface adapter for 32-channel digital input coupling with ATD5A-00 cable interface systemNo additional structured sub-variants are defined in manufacturer documentation beyond these designations. Hardware Specifications Parameter Specification ModelBrand Yokogawa ADV151-P00/D5A00 Origin Japan Weight 0.3kg Dimensions Not specified OperatingTemp -20 degC to 70 degC PowerConsumption Not specified Channels 32-channel digital input Input Type 24 VDC ON/OFF discrete signals System Compatibility Yokogawa FIO system Redundancy Support Dual redundant configuration supported Isolation Channel-to-system electrical isolation Yokogawa FIO Channel Isolation & Field Signal Conditioning The ADV151 series implements channel isolation architecture typical of Yokogawa field control I/O subsystems. Each input channel is electrically isolated from the host control layer to reduce ground loop propagation and improve signal integrity in high-density wiring environments. The module interfaces with FIO backplane infrastructure, enabling structured field signal aggregation into the distributed control system (DCS) environment. Signal conditioning is optimized for 24 VDC ON/OFF logic detection, with internal circuitry designed to stabilize input recognition under industrial switching noise conditions. Dual redundancy capability allows paired module deployment within fault-tolerant I/O node configurations, supporting continuous operation during module-level maintenance or failure scenarios. Frequently Asked Questions Q: Can the ADV151-P00/D5A00 operate in redundant I/O configurations?A: Yes. The module supports dual redundant architecture when deployed in Yokogawa FIO redundant node setups. Q: What type of field signals are accepted at the input channels?A: The module is designed for 24 VDC discrete ON/OFF digital input signals only. Q: Does each channel share a common reference potential?A: No. The design provides electrical isolation to minimize channel interaction and ground loop coupling. Field Installation Guidelines Field wiring shall follow standard 24 VDC discrete signal practices using shielded twisted pair conductors where applicable. Shield termination should be performed at the designated grounding point of the cabinet side only to avoid circulating ground currents. Maintain separation between digital input wiring and power conductors to reduce electromagnetic coupling. Ensure correct mating of the D5A00 adapter interface with the ATD5A-00 cable assembly before energizing the FIO node. Module insertion into the FIO base unit must be performed with power removed unless the system supports hot-swap under controlled maintenance procedures defined by the control system configuration. Terminal tightening must comply with manufacturer-specified torque standards for field wiring blocks to ensure stable contact resistance under vibration conditions.
$200.00 $100.00
-
Yokogawa Digital Input Module-16-channel | ADV159-P01 S1 Yokogawa
Yokogawa ADV159-P01 S1 Digital Input Module TheYokogawa ADV159-P01 S1，also cataloged as theADV159-P01 digital input module, operates as a dedicated hardware component for discrete ON/OFF signal acquisition within Yokogawa Centum VP DCS I/O subsystems. It provides 16-channel isolated DC input conversion for field device state detection and backplane data mapping. SuffixBreakdown & Model Matrix ADV159: Digital input module series identifier P01: Hardware configuration variant S1: Revision / production suffix HardwareSpecifications Parameter Specification ModelBrand Yokogawa ADV159-P01 S1 Input Channels 16 channels Rated Input Voltage 24 to 250 VDC Input ON Voltage 11 to 250 VDC Input OFF Voltage 0 to 10 VDC Input Current (Typ) 4.7 mA @ 120 VDC (per channel) Input Current (Max) 7 mA per channel Withstanding Voltage 2 kV AC (input to system, 1 min) Channel Isolation Group isolation between commons Channel-to-System Isolation Architecture (Yokogawa DCS Input Layer) The ADV159-P01 S1 implements galvanically isolated input circuitry aligned with Yokogawa Centum VP I/O architecture. Each channel is conditioned through isolated detection stages to suppress ground potential differences between field wiring and system backplane. The module supports grouped common separation (8-channel segmentation), reducing cross-channel leakage paths in high-density digital signal environments. Signal threshold discrimination is designed for wide DC switching sources including proximity switches, limit switches, and dry contact interfaces under variable field loop impedance conditions. FrequentlyAskedQuestions Q: Can the module detect both dry contact and powered DC inputs?A: Yes. Input threshold design supports ON/OFF detection across 24 to 250 VDC sourcing and dry contact closures within defined voltage discrimination ranges. Q: What is the channel isolation structure?A: Channels are grouped with common-minus segmentation every 8 channels, providing partial isolation between channel groups and reducing inter-channel coupling. Q: Does the module support redundancy configuration?A: Yes. It is compatible with dual redundant Centum VP I/O configurations depending on system backplane and rack architecture. FieldInstallationGuidelines Field wiring shall maintain separation between high-voltage DC input loops and low-level control cabling. Shield termination should be performed at system cabinet grounding points to avoid ground loop injection into isolated input stages. Input commons must be grouped according to 8-channel segmentation architecture and not bridged externally. Ensure tightening torque and terminal seating follow Yokogawa I/O rack mechanical standards to maintain stable contact resistance under vibration conditions. Avoid routing input wiring parallel to high-frequency drive cables to minimize induced noise coupling into threshold detection circuits. Maintain consistent polarity alignment across DC input field devices to prevent reverse bias stress on input protection stages.
$200.00 $100.00
-
Yokogawa Digital Input Module | ADV151-P03/D5A00 Yokogawa 24–250 VDC
Yokogawa ADV151-P03/D5A00 Digital Input Module The Yokogawa ADV151-P03/D5A00, also cataloged as the ADV151-P03 Digital Input Module, operates as a dedicated hardware component for discrete signal acquisition within Yokogawa CENTUM VP DCS platforms. Configured for ON/OFF field signal interpretation, the Yokogawa ADV151-P03/D5A00 provides direct electrical interface execution for 32-channel DC digital input monitoring across isolated I/O architectures. Suffix Breakdown & Model Matrix No validated manufacturer-disclosed segmentation data for P03/D5A00 suffix structure is available in the provided specification set. The module is treated as a single ordered configuration unit under ADV151-P03 family classification. Hardware Specifications Parameter Specification ModelBrand Yokogawa ADV151-P03/D5A00 Input Channels 32 channels Rated Input Voltage 24 to 250 VDC Input ON Voltage 11 to 250 VDC Input OFF Voltage 0 to 10 VDC Input Current (Typical) 4.7 mA per channel (@120 V AC equivalent reference condition) Input Current (Max) 7 mA per channel Dielectric Strength 2 kVAC (input to system), 1 minute Common Isolation Strength 1.35 kVAC, 1 minute (common minus grouped per 16 channels) Configuration Support Dual redundant capable Channel-to-Channel Isolation Architecture (CENTUM VP I/O Layer) The ADV151-P03/D5A00 implements galvanically isolated input grouping to suppress inter-channel fault propagation during field wiring anomalies. Each 16-channel common group is electrically segmented, reducing cross-channel leakage paths under high-energy switching environments. In CENTUM VP distributed control topology, this isolation structure supports deterministic ON/OFF state acquisition without shared reference drift between field signal clusters. Frequently Asked Questions Q: Does the ADV151-P03/D5A00 support mixed voltage DC inputs within the same module?A: Yes. Each channel accepts a 24 to 250 VDC range with defined ON/OFF thresholds, allowing heterogeneous field device voltage levels within isolation constraints. Q: What is the isolation structure between channels?A: Channels are grouped with isolated commons. Each 16-channel block is separated, and isolation is rated at 1.35 kVAC between common reference segments. Q: Can the module operate in redundant configurations?A: Yes. The module supports dual redundant installation within CENTUM VP I/O architectures, depending on system slot and backplane configuration. Field Installation Guidelines The module shall be installed into compatible Yokogawa CENTUM VP I/O racks with proper backplane seating alignment. Field wiring must maintain segregation between high-voltage DC input lines and low-level signal routing to avoid capacitive coupling. Shield termination should be implemented at the cabinet earth reference point only, avoiding multi-point grounding loops. Channel commons should not be bridged externally across 16-channel group boundaries. Ensure isolation integrity is verified prior to energization through standard dielectric testing procedures.
$200.00 $100.00
-
Yokogawa ADV551-P00/D5A00 Yokogawa Digital Output Module-32 Channels
Yokogawa ADV551-P00/D5A00 Digital Output Module Configured for 24 VDC transistor signal switching in CENTUM and related Yokogawa control platforms, the Yokogawa ADV551-P00/D5A00 (ADV551 Digital Output Module) provides direct physical/electrical execution for 32-channel discrete output transmission. The module supports current sink output architecture with isolated channel grouping, external 24 VDC supply operation, and ON/OFF pulse output handling through dedicated terminal and MIL cable interfaces. Suffix Breakdown & Model Matrix Code Segment Specification ADV551 32-channel digital output module -P00 Basic type without additional functional expansion /D5A00 KS cable interface adapter included Hardware Specifications Parameter Specification Model ADV551-P00/D5A00 Brand Yokogawa Product Type Digital Output Module Origin France Output Channels 32 channels Output Type Current sink transistor output Rated Applied Voltage 24 VDC Load Voltage 24 VDC, 50 mA/channel External Power Supply Voltage 20.4 to 26.4 VDC Maximum Load Current 100 mA/channel at 26.4 VDC Output ON Voltage 2 VDC maximum OFF-State Leak Current 0.1 mA Withstanding Voltage 2 kVAC for 1 minute Inter-Common Isolation 500 VAC for 1 minute per 16-channel group Output Response Time 3 ms Pulse Width Range 8 ms to 7200 s Pulse Width Resolution 8 ms Delay Tolerance Maximum 1 ms ON/OFF transition delay External Connection Pressure clamp terminal, AKB331 cable, MIL connector cable Power Consumption 700 mA at 5 VDC, 60 mA external supply Dimensions 3.2 cm x 10.6 cm x 13 cm Weight 0.2 kg to 0.3 kg Channel-to-Channel Isolation Characteristics The ADV551-P00/D5A00 implements grouped electrical isolation between output signal circuits and internal system circuitry. Isolation withstand capability is specified at 2 kVAC for 1 minute between output signals and the control system side. Separate commons are partitioned in 16-channel groups with 500 VAC isolation separation. The module operates using current sink transistor outputs intended for external 24 VDC field loads. OFF-state leakage is limited to 0.1 mA, reducing unintended field-side energization during inactive states. Output transition handling supports pulse-driven discrete control sequences with programmable timing resolution beginning at 8 ms intervals. Frequently Asked Questions Q: Does the ADV551-P00/D5A00 support hot swapping during controller operation?A: The provided specification does not explicitly define online insertion or hot-swap capability. Standard practice is to isolate field power and follow Yokogawa controller maintenance procedures before module replacement. Q: What field wiring interfaces are supported by this module?A: The module supports pressure clamp terminal connections, dedicated AKB331 cable assemblies, and MIL connector cable interfaces. Q: How are output commons electrically separated?A: Output commons are isolated in groups of 16 channels with 500 VAC withstand separation between commons. Field Installation Guidelines Verify external supply voltage remains within 20.4 to 26.4 VDC before energizing field outputs. Route output wiring separately from analog signal cables to minimize inductive switching interference. Terminate cable shield grounding at a single control cabinet grounding point to avoid circulating ground current loops. Confirm field load current does not exceed 100 mA per channel under maximum supply conditions. Maintain correct polarity on current sink output circuits during terminal installation. Inspect pressure clamp terminal retention force after field vibration exposure or maintenance activity.
$200.00 $100.00
-
Yokogawa ADV169-P00 | Yokogawa | Digital I/O Modules
Yokogawa ADV169-P00 Digital Input Module Configured for 64-channel discrete signal acquisition in CENTUM and compatible ST6 control networks, the Yokogawa ADV169-P00 (ADV169 Digital Input Module) provides direct physical/electrical execution for isolated digital input processing through common-minus segmentation architecture. Suffix Breakdown & Model Matrix Code Segment Description ADV169 Digital Input Module for compatible ST6 P Standard type 0 Always 0 0 Basic type Hardware Specifications Parameter Specification Model ADV169-P00 Brand Yokogawa Product Type Digital Input Module Number of Inputs 64-channel input Signal Isolation Common every 16-channel Input Contact Rating 5 V DC, 20 mA minimum Isolation Method Isolated input groups Input Logic Structure Common minus side every 16-channel Maximum Current Consumption 800 mA at 5 V DC Module Type Basic type Operating Voltage 5 V DC Origin Japan Power Consumption 800 mA at 5 V DC backplane supply Channel Isolation Architecture The ADV169-P00 implements channel grouping with common isolation applied to each 16-channel segment. This arrangement reduces conductive propagation between discrete field signal groups during switching transitions inside distributed control system I/O assemblies. The module operates using common-minus input logic for grouped termination structures. Input circuits are intended for 5 V DC discrete contact monitoring with a minimum input contact capability of 20 mA. Segmented isolation topology assists in limiting cross-channel electrical interference during simultaneous state transitions across high-density digital input assemblies. Frequently Asked Questions Q: Does the ADV169-P00 support per-channel isolation?A: No. Isolation is applied per 16-channel common group rather than individually per input point. Q: What input signal level is required for field contacts connected to the module?A: The specified input contact rating is 5 V DC with a minimum current capability of 20 mA. Q: What installation consideration applies to grouped common-minus inputs?A: Field wiring should maintain segregation between each 16-channel common group to prevent shared return path interference and unintended signal propagation. Field Installation Guidelines Verify 5 V DC input compatibility before connecting dry-contact or transistor output field devices. Maintain shield grounding at a single designated cabinet grounding point to reduce common return noise coupling. Route digital input cabling separately from high-current motor or inverter conductors. Confirm correct common-minus polarity assignment before energizing field terminations. Avoid mixing independent external commons across the same 16-channel isolation group. Inspect backplane connector seating fully before applying system power to the module rack.
$200.00 $100.00
-
Yokogawa Yokogawa ADV561-P50 Digital Output Module-64-channel
Yokogawa ADV561-P50 Digital Output Module Configured for isolated 24 VDC discrete signal execution in CENTUM and related Yokogawa control architectures, the Yokogawa ADV561-P50 (ADV561 Digital Output Module) provides direct physical/electrical execution. The module supports 64-channel digital output handling with pulse width output and time-proportional output functionality integrated into the output control structure. Suffix Breakdown & Model Matrix Suffix Code Specification -P With pulse width output function and time-proportional output function 5 Without status display; no explosion protection 0 Basic type Hardware Specifications Parameter Specification Model ADV561-P50 Brand Yokogawa Product Type Digital Output Module Base Model ADV561 Output Channels 64-channel Output Signal Type Digital output Rated Output Voltage 24 VDC Isolation Isolated channels Pulse Width Output Supported Time-Proportional Output Supported Status Display Not included Explosion Protection Not included Mounting Type System rack/backplane installation Origin Japan Channel-to-Channel Isolation Characteristics The ADV561-P50 implements isolated digital output channel architecture for separation of field-side switching circuits from the control backplane interface. Isolation design reduces transient propagation between adjacent output circuits during inductive load switching and minimizes common return interference within multi-channel discrete output assemblies. The integrated pulse width output function supports duty-cycle based discrete actuation, while the time-proportional output mode permits direct modulation of externally connected solenoids, relays, and proportional control elements operating on 24 VDC field power distribution networks. Output routing is handled through Yokogawa DCS I/O carrier structures with controlled backplane communication timing between processor and field output stages. Frequently Asked Questions Q: Does the ADV561-P50 support hot swapping during operation?A: Module replacement capability depends on the installed Yokogawa control station architecture and active controller redundancy configuration. Field output state behavior during insertion/removal must be validated against the applicable system manual before live replacement. Q: What type of field loads can be connected to the digital outputs?A: The module is intended for 24 VDC discrete field devices such as interposing relays, solenoid valves, annunciators, and discrete actuator interfaces compatible with the module output rating. Q: Are output channels electrically isolated from each other?A: The module is specified as an isolated digital output module. Isolation is implemented to reduce electrical interference transfer between field-side output circuits and internal system electronics. Field Installation Guidelines Verify external field voltage polarity before energizing output terminals. Separate digital output wiring from analog signal cabling to reduce switching noise coupling. Use shield grounding at a single designated grounding point within the control cabinet. Confirm inductive suppression devices are installed across relay coils and solenoid loads where applicable. Maintain terminal tightening torque according to Yokogawa cabinet installation procedures. Confirm backplane connector alignment before module insertion into the I/O rack assembly. Perform loop verification of all output channels after commissioning or module replacement.
$200.00 $100.00
-
Yokogawa Yokogawa ADV151-DI3232-Channel Digital Input Module
Yokogawa ADV151-DI32 Digital Input Module Configured for digital input signal acquisition in Yokogawa FIO-based control networks, the Yokogawa ADV151-DI32 (ADV151 Digital Input Module) provides direct physical/electrical execution for 24 VDC discrete field signal processing through 32 independent input channels. Suffix Breakdown & Model Matrix The supplied documentation references the fixed module designation ADV151-DI32 only. No additional suffix allocation, revision matrix, or option-code segmentation was specified in the provided material. Hardware Specifications Parameter Specification Model ADV151-DI32 Brand Yokogawa Product Type Digital Input Module Number of Channels 32 Input Signal Type Dry contact or voltage input Input Voltage Range 24 VDC Response Time Fast response for real-time signal acquisition Operating Temp -20 degC to +70 degC Mounting Method Modular FIO system installation System Compatibility Yokogawa FIO control platform Isolation Type Channel architecture designed for industrial discrete signal interfacing Origin Japan Channel Isolation and DCS Signal Handling The ADV151-DI32 module operates within Yokogawa distributed control architectures using discrete 24 VDC field signal acquisition. Channel grouping and internal signal conditioning are intended to reduce false-state transitions generated by electrical noise on long cable runs. Input handling supports dry-contact status monitoring and externally sourced voltage-state detection commonly associated with motor starters, relay feedback contacts, limit switches, and interposing relay outputs. Shield termination and common reference management should follow cabinet grounding practices defined for the associated FIO subsystem. Within multi-module DCS installations, separation between discrete input wiring and analog loop cabling is recommended to minimize inductive coupling from switching loads and high-current conductors. Frequently Asked Questions Q: Does the ADV151-DI32 support dry contact inputs only?A: No. The module supports both dry contact inputs and voltage-based discrete input signals within the specified 24 VDC operating range. Q: Can field input wiring be routed in the same cable tray as high-current AC power conductors?A: Parallel routing with high-current conductors is generally avoided in industrial control cabinets. Separate routing or shielded cabling is recommended to reduce induced transient noise on digital input channels. Q: Is hot replacement supported during system operation?A: The supplied material does not explicitly define hot-swap capability. Replacement procedures should follow the active Yokogawa controller and FIO rack maintenance documentation before module removal or insertion. Field Installation Guidelines Verify 24 VDC field supply polarity before energizing input terminals. Use shielded signal cable where discrete inputs are exposed to variable-frequency drives, contactor banks, or inductive switching devices. Maintain segregation between low-level control wiring and AC distribution conductors inside marshalling cabinets. Confirm terminal torque values according to the applicable Yokogawa installation manual before commissioning. Inspect grounding continuity between cabinet earth points and field shield termination rails prior to startup. Label all field channels consistently with the controller I/O allocation database to prevent cross-channel commissioning errors.
$200.00 $100.00
-
Yokogawa Yokogawa ADV551-DO32 Digital Output Module
Yokogawa ADV551-DO32 Digital Output Module Configured for digital output signal execution in Yokogawa FIO control networks, the Yokogawa ADV551-DO32 (ADV551 Digital Output Module) provides direct electrical switching across 32 isolated output channels for distributed process control and I/O interfacing tasks. Hardware Specifications Parameter Specification Model ADV551-DO32 Brand Yokogawa Product Type Digital Output Module Number of Channels 32 Output Signal Type Sinking or sourcing Output Voltage Range 24 VDC Response Time High-speed switching operation Diagnostic Functions Open-circuit and short-circuit detection Hot Swap Support Supported Operating Temp -20 degC to +70 degC System Compatibility Yokogawa FIO systems Mounting Method Backplane-mounted module Isolation Type Channel diagnostic isolation Origin Japan Channel Isolation and DCS Signal Integrity The module operates within Yokogawa distributed control architectures using channel-separated digital output execution to reduce fault propagation between adjacent output points. Diagnostic monitoring continuously validates output state consistency against commanded logic conditions. The ADV551-DO32 supports direct integration into FIO backplane communication structures where deterministic output refresh timing is required for process interlocking, actuator switching, and relay command transmission. Output status supervision assists maintenance personnel during loop validation and field wiring verification procedures. Frequently Asked Questions Q: Does the ADV551-DO32 support hot replacement during operation?A: Yes. The module supports hot-swappable replacement within compatible Yokogawa FIO systems without requiring complete controller shutdown. Q: What type of field output configuration is supported?A: The module supports both sinking and sourcing digital output configurations operating at 24 VDC. Q: Are onboard diagnostics available for field wiring faults?A: Yes. The module includes open-circuit and short-circuit detection functions for output channel diagnostics. Field Installation Guidelines Verify field supply polarity before energizing output terminals. Separate digital output wiring from analog signal cables to minimize induced electrical noise. Use shielded field cables when routing outputs near variable-frequency drives or high-current motor feeders. Confirm backplane connector alignment before inserting or removing the module from the rack assembly. Maintain proper cabinet grounding continuity between the control panel, DIN rail, and field termination shield drain points. Perform channel-state verification after commissioning to confirm correct sinking or sourcing output behavior.
$200.00 $100.00
You have seen 264 out of 594 products