TSI (Turbomachinery Supervisory Instrumentation) systems monitor and protect rotating equipment. We supply modules, sensors, and spares to support both new and discontinued models. Our solutions help reduce downtime and protect critical assets.
TSI Monitoring Systems
-
Bently Nevada Bently Nevada | 330104‑00‑06‑90‑02‑00 | 3300 XL 8 mm Proximity Probe
Overview The Bently Nevada 330104‑00‑06‑90‑02‑00 proximity probe is part of the 3300 XL 8 mm transducer family and is engineered for long‑distance installations requiring stable displacement and vibration measurements. This model incorporates a 9.0‑meter probe cable, making it suitable for machinery layouts where extended routing is necessary without compromising signal integrity. Key Characteristics Model: 330104‑00‑06‑90‑02‑00 Probe Type: 8 mm proximity probe with FluidLoc cable Thread Specification: M10 × 1 Minimum Case Length: 60 mm Cable Length: 9.0 m (29.5 ft) Connector: Miniature coaxial ClickLoc System Compatibility: 3300 Proximity Transducer System Certifications: CSA, ATEX, IECEx Condition: New Weight: 0.08 kg Dimensions: 2 × 1.5 × 122 cm Functional Description The 330104‑00‑06‑90‑02‑00 probe uses an eddy‑current sensing coil to measure the distance between the probe tip and a conductive target surface. Its extended 9‑meter cable allows installation flexibility in large machinery skids, turbine decks, or compressor trains. The FluidLoc cable design prevents oil migration through the cable jacket, improving long‑term reliability in lubrication‑rich environments. The ClickLoc connector ensures a secure mechanical lock, preventing accidental loosening under vibration. When paired with the appropriate extension cable and Proximitor sensor, the probe forms a calibrated measurement chain compliant with API 670 requirements. Technical Specifications Mechanical Parameter Value Probe Tip Diameter 8 mm Thread Type M10 × 1 Case Length ≥ 60 mm Cable Length 9.0 m Cable Type FluidLoc, oil‑resistant Connector Miniature coaxial ClickLoc Weight 0.08 kg Shipping Dimensions 2 × 1.5 × 122 cm Electrical Parameter Value Sensitivity 7.87 V/mm (200 mV/mil) typical Linear Range 2 mm (80 mil) Frequency Response DC to 10 kHz System Compatibility 3300 XL Proximity System Grounding Single‑point shield grounding recommended Environmental Parameter Value Operating Temperature –35°C to +177°C (probe only) Humidity 95% non‑condensing Certifications CSA, ATEX, IECEx RFI/EMI Immunity Meets CE requirements Applications Turbines (steam, gas, hydro) Compressors and expanders High‑speed motors and generators Gearboxes and critical rotating assets API 670‑compliant vibration protection systems FAQ Q: Can this probe be used with non‑XL 3300 systems? A: No. It must be paired with 3300 XL extension cables and Proximitor sensors to maintain calibration accuracy. Q: What advantage does the FluidLoc cable provide? A: It prevents oil ingress through the cable jacket, improving reliability in lubrication‑intensive environments. Q: Is field calibration required? A: No. The probe, extension cable, and Proximitor sensor are factory‑matched and do not require bench calibration.
$200.00 $100.00
-
Bently Nevada Bently Nevada | 330103‑00‑06‑05‑02‑05 | 3300 XL 8 mm Proximity Probe
Overview The Bently Nevada 330103‑00‑06‑05‑02‑05 proximity probe is part of the 3300 XL 8 mm transducer family, engineered for precise shaft vibration and position measurements in rotating machinery. This probe assembly is designed for long‑term stability, high linearity, and reliable operation in electrically noisy industrial environments. Key Features Probe Model: 330103‑00‑06‑05‑02‑05 Probe Type: 8 mm unarmored proximity probe Thread Specification: M10 × 1 Minimum Case Length: 60 mm Cable Length: 0.5 m (1.6 ft), miniature coaxial ClickLoc connector System Compatibility: 3300 XL Proximity Transducer System Certifications: CSA, ATEX, IECEx RFI/EMI Performance: Enhanced immunity suitable for fiberglass housings without shielded conduit Operating Principle: Eddy‑current displacement measurement Typical Applications: Shaft vibration, axial position, phase reference, and radial clearance monitoring Technical Specifications Mechanical Parameter Value Probe Tip Diameter 8 mm Thread Type M10 × 1 Case Length ≥ 60 mm Cable Length 0.5 m Connector Type Miniature coaxial ClickLoc Weight 0.06 kg Shipping Dimensions 115 × 2.5 × 1.5 cm Electrical Parameter Value Sensitivity 7.87 V/mm (200 mV/mil) typical Linear Range 2 mm (80 mil) Frequency Response DC to 10 kHz System Compatibility 3300 XL Proximity System (Probes + Extension Cable + Proximitor) Grounding Single‑point shield grounding recommended Environmental Parameter Value Operating Temperature –35°C to +177°C (probe only) Humidity 95% non‑condensing Certifications CSA, ATEX, IECEx RFI/EMI Immunity Meets CE requirements without metallic conduit Functional Description The 330103‑00‑06‑05‑02‑05 probe uses an eddy‑current sensing coil to detect the distance between the probe tip and a conductive target surface, typically a rotating shaft. Its improved electromagnetic shielding allows installation in non‑metallic housings without performance degradation. The ClickLoc connector ensures secure attachment to extension cables, preventing accidental loosening under vibration. The probe is optimized for use with the 3300 XL Proximitor sensor, forming a calibrated measurement chain that delivers stable displacement and vibration readings across a wide temperature range. Applications Steam and gas turbines Compressors and expanders Motors and generators Gearboxes and pumps API 670‑compliant vibration protection systems FAQ Q: Can this probe be mixed with older 7200 series components? A: No. Mixing 3300 XL probes with older systems results in incorrect calibration and is not recommended. Q: Does the probe require metallic conduit for CE compliance? A: No. Its enhanced RFI/EMI immunity allows installation in fiberglass or non‑metallic housings. Q: Is the probe suitable for high‑temperature zones?
$200.00 $100.00
-
Bently Nevada Bently Nevada 330180-51-CN 3300 XL Proximitor Sensor
Product Overview The Bently Nevada 330180-51-CN 3300 XL Proximitor Sensor belongs to the 3300 Proximity Transducer System. It provides accurate non-contact monitoring of vibration, displacement, and shaft position in rotating machinery. Its compact DIN rail mount design and rugged construction ensure reliable performance in harsh industrial environments. Technical Specifications Parameter Value Model Number 330180-51-CN Module Type 3300 XL Proximitor Sensor Manufacturer Bently Nevada Product Range 3300 Proximity Transducer System Condition Brand New Dimensions 8.8 × 3.5 × 7 cm Weight 0.22 kg HS Code 8537101190 Minimum Order Quantity 1 Origin USA System TSI Communication Service Ethernet Router Status Active System Length 5.0 m Mounting Type DIN rail Connector Screw-clamp terminal Indicator LED status Operating Temperature –40 °C to +85 °C Frequency Response 0.5 Hz – 12 kHz Compliance API 670 standards Technology Eddy-current Functional Description The 330180-51-CN sensor translates probe-to-target distance into precise voltage output using advanced eddy-current technology. It supports both dynamic vibration and static position measurements, ensuring dependable monitoring in oil and gas, power generation, and petrochemical facilities. Its backward compatibility eliminates the need for recalibration when integrated with existing 3300 XL components. Applications and Compatibility The Bently Nevada 330180-51-CN Proximitor Sensor suits compressors, turbines, and other critical rotating machinery. It integrates seamlessly with predictive maintenance systems, supporting condition monitoring programs that reduce downtime. Its compliance with API 670 standards ensures industry-grade reliability and compatibility with legacy installations. Key Benefits Compact 8.8x3.5x7cm dimensions simplify installation in modular setups. Lightweight 0.22kg design improves handling and replacement efficiency. Wide –40 °C to +85 °C operating range supports extreme environments. Frequency response from 0.5Hz to 12kHz ensures accurate vibration monitoring. Backward compatibility reduces integration costs and simplifies upgrades.
$200.00 $100.00
-
Bently Nevada Bently Nevada 2300/20-00 Vibration Monitors
Overview The 2300/20-00 Vibration Monitor from Bently Nevada is engineered for continuous condition monitoring of medium and low criticality machinery. It provides real-time vibration data and alarm outputs to protect assets across diverse industrial sectors. Technical Specifications Specification Details Model Number 2300/20-00 Manufacturer Bently Nevada Product Series Bently Nevada Module Type Vibration Monitor Dimensions 30.1 x 19 x 5.2 cm Weight 1.9 kg System Compatibility TSI Communication Interface Ethernet Router HS Code 8537101190 Product Origin USA Condition Brand New Lead Time In Stock MOQ 1 Discontinued Status Active Key Features The 2300/20-00 supports two vibration input channels and one speed input for synchronous analysis. Compatible with accelerometers, Velomitors, and Proximitors for flexible sensor integration. Configurable 4–20 mA output enables seamless DCS connectivity and scalable monitoring. Bandpass filters range from 0.2 Hz to 20 kHz, supporting full-scale detection from 2 to 80 g peak. Operates on 18–36 Vdc with a maximum power draw of 7.5 W, suitable for distributed installations. Applications & Compatibility The 2300/20-00 Vibration Monitor is ideal for industries such as: Oil & Gas Power Generation Water Treatment Pulp & Paper Mining & Cement
$200.00 $100.00
-
Bently Nevada Bently Nevada 22810-00-06-10-02 3300 XL Proximity Probe
Product Overview The Bently Nevada 22810-00-06-10-02 3300 XL Proximity Probe delivers precise vibration monitoring for critical rotating machinery. Its 316 stainless steel housing ensures durability, while the M10 × 1 threaded design secures installation across diverse applications. Operators rely on this probe for consistent diagnostics in turbines, compressors, and pumps. Technical Specifications Parameter Value Model Number 22810-00-06-10-02 Module Type 3300 XL Proximity Probe Manufacturer Bently Nevada Product Series 3300 XL Condition Brand New Dimensions 20.4 × 22.2 × 3.7 cm Weight 0.12 kg HS Code 8537101190 System TSI Communication Service Ethernet Router Minimum Order Quantity 1 Origin USA Lead Time In Stock Status Active Cable Length 6.0 m (19.7 ft) Frequency Response 0–10 kHz (±3 dB) Sensitivity 7.87 V/mm (200 mV/mil ±5%) Thread Type M10 × 1 Stainless Steel Functional Description The 22810-00-06-10-02 probe features a wide frequency response range from 0 to 10 kHz, enabling detailed vibration analysis. Its sensitivity rating of 7.87 V/mm ensures accurate output for machinery diagnostics. The 6.0 m cable length provides installation flexibility, even in complex layouts. Compact packaging dimensions of 20.4 × 22.2 × 3.7 cm simplify handling and storage. Applications and Compatibility The 22810-00-06-10-02 3300 XL Proximity Probe integrates seamlessly with Bently Nevada monitoring systems, supporting predictive maintenance and centralized diagnostics. It suits industries such as power generation, petrochemical, and manufacturing, where continuous vibration monitoring is essential. Compatibility with the 3300 XL series ensures easy upgrades and replacements without modification.
$200.00 $100.00
-
Bently Nevada Bently Nevada 330101‑33‑66‑10‑02‑05 | 3300 XL Series | 8 mm Proximity Probe
Overview The 330101‑33‑66‑10‑02‑05 proximity probe from Bently Nevada’s 3300 XL 8 mm series is engineered for precise shaft vibration and position measurement in rotating machinery. Designed for long‑term stability in harsh industrial environments, it integrates seamlessly with the 3300 XL Proximitor Sensor to deliver consistent, high‑accuracy displacement monitoring. Key Features 8 mm tip for standard industrial proximity measurements Unarmored probe design for flexible routing 3/8‑24 UNF mounting thread for secure installation Miniature coaxial ClickLoc connector for reliable electrical contact Compatible with 3300 XL Proximitor Sensors Enhanced immunity to RFI/EMI interference Certified to CSA, ATEX, and IECEx requirements Suitable for gas compressors, turbines, pumps, and general rotating equipment Technical Specifications Parameter Specification Model 330101‑33‑66‑10‑02‑05 Probe Type 3300 XL 8 mm Proximity Probe Thread Size 3/8‑24 UNF Cable Length 1.0 m Connector Miniature coaxial ClickLoc System Compatibility 3300 Proximity Transducer System Certifications CSA, ATEX, IECEx Weight 0.04 kg Dimensions 110 × 1.5 × 1.2 cm Origin USA Condition Brand New HS Code 8537101190 System TSI Status Active production Functional Characteristics The 330101‑33‑66‑10‑02‑05 probe is optimized for applications requiring stable gap measurement and vibration monitoring. Its mechanical design minimizes thermal drift and ensures consistent sensitivity across a wide temperature range. When paired with the 3300 XL Proximitor Sensor, the system provides linear output over the full measurement range and supports installation in metallic or non‑metallic housings without interference. Application Scenarios Gas compressor radial and axial vibration monitoring Turbine shaft displacement measurement Pump bearing housing vibration analysis Gearbox shaft position tracking Condition monitoring and predictive maintenance systems Similar Models Comparison Model Cable Length Thread Type Application Notes 330101‑00‑12‑10‑02‑00 0.5 m 3/8‑24 UNF Compact installations 330101‑33‑66‑10‑02‑05 1.0 m 3/8‑24 UNF Standard compressor applications 330103‑00‑12‑10‑02‑00 5 m M10 × 1 Long‑distance routing FAQ Q: Can this probe be used with older 7200 series proximitor modules? A: It is designed for the 3300 XL system. Compatibility with legacy systems may require verification of scale factors and calibration. Q: Is the probe suitable for hazardous areas? A: Yes, it carries CSA, ATEX, and IECEx certifications. Q: Does the probe include the proximitor sensor? A: No, the proximitor sensor is purchased separately.
$200.00 $100.00
-
Bently Nevada Bently Nevada 330704‑010‑060‑10‑11‑00 | 3300 XL Series | 11 mm Proximity Probe
Overview The 330704‑010‑060‑10‑11‑00 proximity probe is part of Bently Nevada’s 3300 XL 11 mm transducer family, designed for high‑accuracy displacement and vibration measurement in large rotating machinery. This probe assembly is optimized for applications requiring extended linear range and enhanced sensitivity, making it suitable for turbines, compressors, and other fluid‑film bearing equipment. Design and Construction This model features an M14×1.5 threaded probe body with a 60 mm overall length and a minimum 10 mm unthreaded section. The probe includes a 1‑meter armored cable for mechanical protection in harsh environments. Its 11 mm tip design provides a wider linear range than 8 mm probes, enabling more accurate monitoring of slow‑speed or high‑displacement machinery. The assembly incorporates FluidLoc cable technology to prevent oil ingress and uses a miniature coaxial ClickLoc connector for secure, tool‑free installation. Stainless steel armor (indicated by “10” in the part number) ensures long‑term durability in high‑vibration environments. Technical Specifications Parameter Specification Model 330704‑010‑060‑10‑11‑00 Product Type 11 mm Proximity Probe Probe Tip Diameter 11 mm Thread Type M14 × 1.5 Probe Length 60 mm Unthreaded Length 10 mm minimum Cable Length 1.0 m Sensitivity 3.94 V/mm (100 mV/mil) Connector Type Miniature ClickLoc Cable Protection Stainless steel armor Temperature Range –51°C to +177°C Certifications ATEX, IECEx, CSA System Compatibility 3300 XL Proximity Transducer System Dimensions 115.5 × 2.5 × 2 cm Weight 0.16 kg Origin USA HS Code 8537101190 Product Status Active Functional Characteristics Extended linear range for large‑displacement machinery High sensitivity for accurate shaft position and vibration measurement FluidLoc cable design for oil‑rich environments ClickLoc connectors with positive locking feedback Stainless steel armored cable for mechanical protection Full compatibility with 3300 XL monitoring systems Application Scenarios Axial thrust position monitoring in steam turbines Differential expansion measurement Reciprocating compressor rod position detection Keyphasor signal generation Slow‑speed machinery requiring extended measurement range Model Comparison Model Probe Tip Cable Length Protection Typical Use 330704‑010‑060‑10‑11‑00 11 mm 1 m Armored High‑displacement machinery 330704‑000‑060‑10‑11‑00 11 mm 5 m Armored Long‑distance routing 330705‑02‑18‑10‑02‑00 8 mm 1.8 m Unarmored Standard vibration monitoring FAQ Q: What advantages does the 11 mm probe offer over 8 mm versions? A: The 330704‑010‑060‑10‑11‑00 provides a wider linear range, making it ideal for slow‑speed or large‑movement machinery. Q: Can this probe be used in hazardous areas? A: Yes. It is certified under ATEX, IECEx, and CSA standards. Q: Does the probe require calibration during installation? A: No. It is factory‑matched with its extension cable and driver, eliminating field calibration.
$200.00 $100.00
-
Bently Nevada Bently Nevada 330102‑00‑28‑10‑02‑05 | 3300 XL Series | 8 mm Proximity Probe
Overview The 330102‑00‑28‑10‑02‑05 proximity probe is part of Bently Nevada’s 3300 XL 8 mm transducer family, engineered for precise shaft displacement and vibration measurement in rotating machinery. Designed for integration into the 3300 Proximity Transducer System, it provides stable, repeatable performance in demanding industrial environments where accurate condition monitoring is essential. Design and Construction This model features a 3/8‑24 UNF threaded probe body and a factory‑matched cable assembly to maintain linearity and measurement accuracy. The probe includes a standard 1.0‑meter cable and a Miniature ClickLoc connector, ensuring secure, corrosion‑resistant connections. Armored cable protection enhances durability in high‑vibration or abrasive environments, while optional FluidLoc technology prevents oil ingress in lubrication‑rich applications. Technical Specifications Parameter Specification Model 330102‑00‑28‑10‑02‑05 Product Type 8 mm Proximity Probe Probe Tip Diameter 8 mm Thread Type 3/8‑24 UNF Cable Length 1.0 m Connector Type Miniature ClickLoc Pull Strength 330 N (75 lbf) Temperature Range –51°C to +177°C Certifications ATEX, IECEx, CSA System Compatibility 3300 XL Proximity Transducer System Dimensions 20.4 × 22.2 × 3.7 cm Weight 0.15 kg Origin USA HS Code 8537101190 Product Status Active Functional Characteristics High‑accuracy displacement and vibration measurement for critical rotating equipment TipLoc and CableLoc construction for improved mechanical integrity Gold‑plated ClickLoc connectors with audible locking feedback Full interchangeability with other 3300 XL 8 mm components Suitable for hazardous areas with global safety approvals No recalibration required when replacing matched components Application Scenarios Turbines, compressors, and high‑speed pumps Shaft position and radial vibration monitoring Machinery protection systems in power generation and petrochemical plants Environments requiring armored or fluid‑resistant cable assemblies Model Comparison Model Probe Tip Cable Length Protection Typical Use 330102‑00‑28‑10‑02‑05 8 mm 1.0 m Armored Standard industrial machinery 330102‑00‑12‑10‑02‑05 8 mm 5 m Armored Long‑distance routing 330103‑00‑04‑10‑02‑05 5 mm 1 m Unarmored Tight‑clearance installations FAQ Q: Does this probe require calibration before installation? A: No. The 330102‑00‑28‑10‑02‑05 is factory‑matched with its extension cable and driver, eliminating field calibration. Q: Can it be used in hazardous areas? A: Yes. It carries ATEX, IECEx, and CSA certifications. Q: Is the probe compatible with older 3300 systems? A: It is fully compatible with the 3300 XL system and supports backward compatibility with selected 5 mm and 8 mm components.
$200.00 $100.00
-
Bently Nevada Bently Nevada 330180-10-05 3300 XL Proximitor Sensor
Product Overview The Bently Nevada 330180-10-05 Proximitor Sensor belongs to the 3300 XL Proximity Transducer System. This 1.0-meter panel-mount sensor ensures precise vibration and position monitoring in turbines, compressors, pumps, and generators. Its compact dimensions and lightweight design simplify installation while maintaining superior electrical isolation. Technical Specifications Parameter Value Model Number 330180-10-05 Module Type 3300 XL Proximitor Sensor Manufacturer Bently Nevada Product Range 3300 Proximity Transducer System Condition Brand New Dimensions 8.8 × 3.5 × 7 cm Weight 0.22 kg HS Code 8537101190 Minimum Order Quantity 1 Origin USA System TSI Communication Service Ethernet Router Status Active Certifications CSA, ATEX, IECEx, CE Probe Compatibility 5 mm and 8 mm proximity probes Mounting Options DIN-rail or panel-mount, 4-hole footprint Functional Description The 330180-10-05 sensor incorporates SpringLoc terminal strips that enable tool-free, vibration-resistant wiring connections. Its enhanced RFI/EMI immunity meets CE mark requirements, allowing installation in fiberglass enclosures without shielded conduit. The sensor eliminates the need for isolator plates, reducing installation complexity while ensuring reliable electrical isolation. Applications and Compatibility The Bently Nevada 330180-10-05 Proximitor Sensor supports critical machinery monitoring in hazardous environments. CSA, ATEX, and IECEx certifications guarantee safe operation. Compatibility with both 5 mm and 8 mm proximity probes provides flexibility for diverse monitoring applications. Operators integrate it easily into legacy systems thanks to its standardized 4-hole footprint. Key Benefits Compact 8.8x3.5x7cm dimensions simplify installation in restricted spaces. Lightweight 0.22kg design improves handling and replacement efficiency. SpringLoc terminals eliminate screw-type connections, enhancing reliability. Certified for hazardous areas, ensuring global compliance and safety. Backward compatibility supports legacy 3300 series installations.
$200.00 $100.00
-
Bently Nevada Bently Nevada 330105-02-12-02-05-00 3300 XL 8 mm Reverse Mount Probe
Product Overview The Bently Nevada 330105-02-12-02-05-00 Reverse Mount Probe belongs to the 3300 XL series, engineered for precise vibration and position monitoring. Its armored 1.0 meter cable with Miniature ClickLoc coaxial connector ensures secure installation and reliable signal transmission. Operators use this probe to measure static position and dynamic vibration in turbines, compressors, and pumps. Technical Specifications Parameter Value Model Number 330105-02-12-02-05-00 Module Type 3300 XL 8 mm Reverse Mount Probe Manufacturer Bently Nevada Product Series 3300 Proximity Transducer System Condition Brand New Dimensions 21 × 20 × 2 cm Weight 0.32 kg HS Code 8537101190 System TSI Communication Service Ethernet Router Minimum Order Quantity 1 Origin USA Lead Time In Stock Status Active Cable Length 1.0 m Armored Connector Type Miniature ClickLoc Coaxial Temperature Range -51°C to +177°C Certifications CSA, ATEX, IECEx Compliance API 670 (4th Edition) Functional Description The 330105-02-12-02-05-00 probe generates voltage outputs proportional to the distance between its tip and target surface. Its advanced eddy current technology ensures superior linear range, temperature stability, and measurement accuracy. The probe eliminates the need for component matching or bench calibration, reducing installation time and maintenance requirements. Engineers rely on the 330105-02-12-02-05-00 for hazardous environments, thanks to CSA, ATEX, and IECEx certifications. Its armored construction withstands extreme industrial conditions, ensuring durability and long-term reliability. Applications and Compatibility The 330105-02-12-02-05-00 Reverse Mount Probe integrates seamlessly with Bently Nevada monitoring systems, supporting predictive maintenance and centralized diagnostics. It suits industries such as power generation, petrochemical, and manufacturing. Compatibility with the 3300 series ensures easy upgrades and interchangeability with probes, extension cables, and Proximitor sensors.
$200.00 $100.00
-
Bently Nevada Bently Nevada 330104-00-05-05-01-00 3300 XL 8 mm Probe
Product Overview The Bently Nevada 330104-00-05-05-01-00 3300 XL 8 mm Probe delivers precise vibration and position monitoring in compact installations. Its 5mm design solves space limitations while maintaining full API 670 compliance. The probe features a 0.5m armored cable with M8×1 threading and a protected ClickLoc connector, ensuring secure installation and reliable signal transmission. Technical Specifications Parameter Value Model Number 330104-00-05-05-01-00 Module Type 3300 XL 8 mm Probe Manufacturer Bently Nevada Product Series 3300 Proximity Transducer System Condition Brand New Dimensions 1.8 × 1.6 × 70 cm Weight 0.08 kg HS Code 8537101190 System TSI Communication Service Ethernet Router Minimum Order Quantity 1 Origin USA Lead Time In Stock Status Active Cable Length 0.5 m Armored Thread Type M8 × 1 Connector Type Miniature Coaxial ClickLoc Certifications CSA, ATEX, IECEx, CE Functional Description The 330104-00-05-05-01-00 probe integrates seamlessly with the 3300 XL Proximitor Sensor platform. Its compact 5mm dimensions make it ideal for installations where larger probes cannot fit. Engineers benefit from SpringLoc terminals, RFI/EMI immunity, and electrical isolation built into the mounting configuration. The armored cable ensures mechanical protection, while the ClickLoc connector guarantees secure connections in harsh environments. Applications and Compatibility The 330104-00-05-05-01-00 3300 XL Probe suits industries such as power generation, petrochemical, and manufacturing. It is particularly valuable for monitoring small bearings, high-speed machinery, and equipment with limited installation space. Compatibility with the 3300 Proximity Transducer System ensures easy upgrades and reliable integration into existing monitoring setups.
$200.00 $100.00
-
Bently Nevada Bently Nevada 330525‑02 Velomitor XA Piezo‑Velocity Sensor
Overview The 330525‑02 Velomitor XA Piezo‑Velocity Sensor is a rugged vibration‑monitoring device developed by Bently Nevada for machinery protection and condition monitoring applications. Designed for use in harsh industrial environments, this sensor provides accurate casing‑vibration measurements where shaft‑based proximity probes are not practical. Its compact, sealed construction ensures long‑term reliability in demanding process facilities. Functional Characteristics The sensor is built with a corrosion‑resistant 316L stainless steel housing and an environmentally sealed connector system, eliminating the need for external protective enclosures. The 330525‑02 meets IP65 and NEMA 4X environmental ratings, offering strong resistance to dust, moisture, and chemical exposure. Key performance features include: Piezoelectric velocity measurement for casing vibration Compact form factor for tight mounting locations Weather‑resistant cable and connector assembly Suitable for pumps, compressors, motors, and fans Designed for general industrial use (non‑radiation‑rated) This model is part of the Velomitor XA family and integrates seamlessly with Bently Nevada monitoring systems, including the 3300 series. Technical Specifications Parameter Specification Model 330525‑02 Product Type Velomitor XA Piezo‑Velocity Sensor Brand Bently Nevada Series 3300 Proximity Transducer System Dimensions 7.2 × 2.8 × 2.8 cm Weight 0.14 kg Origin USA HS Code 8537101190 Condition New Availability In Stock Housing Material 316L stainless steel Environmental Rating IP65 / NEMA 4X Application Casing vibration measurement System Compatibility TSI / Bently Nevada monitoring systems Minimum Order 1 unit Integration and System Role The 330525‑02 is used to: Measure casing vibration on rotating equipment Support predictive maintenance programs Provide input to turbine, compressor, and motor protection systems Enable continuous monitoring in harsh industrial environments Its robust mechanical design and stable output make it suitable for long‑term deployment in process industries such as petrochemical, refining, power generation, and water treatment. Application Scenarios Pumps and centrifugal compressors Industrial motors and generators Fans and blowers Machinery with limited mounting space Environments with high moisture, dust, or chemical exposure FAQ Q: What type of vibration does the sensor measure? A: It measures casing vibration using piezoelectric velocity sensing. Q: Does the sensor require a protective housing? A: No. Its stainless‑steel enclosure and sealed connector system provide full environmental protection.
$200.00 $100.00
-
Bently Nevada Bently Nevada 3500/05-01-02-00-00-01 System Rack
Product Overview The Bently Nevada 3500/05-01-02-00-00-01 System Rack belongs to the 3500 monitoring system. It houses vibration monitors, power supplies, and interface modules, ensuring reliable communication and centralized power distribution. Its robust design supports multiple mounting formats, making it suitable for diverse industrial installations. Technical Specifications Parameter Value Model Number 3500/05-01-02-00-00-01 Module Type System Rack Manufacturer Bently Nevada Product Range 3500 System Condition Brand New Dimensions 48.2 × 27.4 × 26.6 cm Weight 6.3 kg HS Code 8537101190 Minimum Order Quantity 1 Origin USA System TSI Communication Service Ethernet Router Status Active Rack Options 19-inch 14-slot, 12-inch 7-slot Mounting Formats Panel, rack, bulkhead Slot Arrangement Left slots for power/interface, right for I/O Functional Description The 3500/05-01-02-00-00-01 rack supports 14 slots in full-size EIA configurations or 7 slots in mini-rack setups. Its standardized layout reserves left-side slots for power supplies and interface modules, while monitoring and I/O modules occupy the right. This arrangement reduces wiring complexity and maintains signal integrity for critical speed monitoring up to 30,000 RPM. Applications and Compatibility The Bently Nevada 3500/05-01-02-00-00-01 System Rack suits power plants, compressor stations, and industrial facilities requiring vibration and overspeed protection. Its compatibility with the broader 3500 series ensures seamless integration and simplified maintenance. Operators deploy it in panel-mounted control rooms or bulkhead-mounted field installations, benefiting from its intelligent power distribution. Key Benefits Compact 48.2x27.4x26.6cm dimensions fit diverse installation environments. Heavy-duty 6.3kg build ensures durability and stability. Multiple rack options provide flexibility for space-constrained setups. Logical slot arrangement simplifies wiring and module integration. Supports panel, rack, and bulkhead mounting for versatile deployment.
$200.00 $100.00
-
Bently Nevada Bently Nevada 330902-00-40-10-01-05 3300 NSv Proximity Probe
Product Overview The Bently Nevada 330902-00-40-10-01-05 3300 NSv Proximity Probe belongs to the 3300 Proximity Transducer System. It delivers precise shaft vibration and position measurements in turbines, compressors, and heavy machinery. Its slim profile supports installation in space-constrained environments, while rugged construction ensures long-term reliability. Technical Specifications Parameter Value Model Number 330902-00-40-10-01-05 Module Type 3300 NSv Proximity Probe Manufacturer Bently Nevada Product Range 3300 Proximity Transducer System Condition Brand New Dimensions 62 × 62 × 1 cm Weight 0.06 kg HS Code 8537101190 Minimum Order Quantity 1 Origin USA System TSI Communication Service Ethernet Router Status Active Accuracy ±1% across operating range Operating Temperature –40 °C to +120 °C Protection Rating IP67 Connection Type SpringLoc terminal strips Certifications CE, CSA, ATEX, IECEx Immunity Enhanced RFI/EMI shielding Functional Description The 330902-00-40-10-01-05 probe incorporates advanced RFI/EMI shielding that meets CE standards, ensuring measurement accuracy in electrically noisy environments. Its IP67-rated housing protects against dust and moisture, while SpringLoc terminal strips simplify wiring without tools. The probe maintains ±1% accuracy across –40 °C to +120 °C, making it suitable for harsh industrial conditions. Applications and Compatibility The Bently Nevada 330902-00-40-10-01-05 Proximity Probe suits turbomachinery applications in power generation, oil and gas, and heavy industries. Its slim profile allows installation in high-density DIN rail or panel-mount configurations. Compatibility with the 3300 Proximity Transducer System ensures seamless integration into existing monitoring frameworks. Key Benefits Compact 62x62x1cm dimensions fit space-constrained installations. Lightweight 0.06kg design simplifies handling and replacement. IP67 housing guarantees durability in harsh industrial environments. ±1% accuracy ensures precise vibration and position monitoring. SpringLoc terminals enable secure, tool-free wiring connections.
$200.00 $100.00
-
General Electricneral Electric General Electric FANUC Series IC660HHM501 Hand‑Held Monitor
Overview The IC660HHM501 portable monitor from General Electric’s FANUC line is a compact diagnostic and configuration tool designed for Genius I/O networks and DCS‑based control systems. It provides direct access to device parameters, system status, and troubleshooting functions without requiring a connected PLC or programming workstation. Functional Characteristics This handheld unit integrates a four‑line LCD display capable of presenting up to sixteen characters per line, offering clear visibility for configuration data and system feedback. A sealed twenty‑key membrane keypad supports navigation, data entry, and command execution in demanding industrial environments. The monitor supports multilingual operation, including English, German, French, and Italian, making it suitable for globally deployed systems. A built‑in keyswitch provides controlled access to advanced functions, ensuring operational security during commissioning or maintenance. Power and Connectivity The IC660HHM501 can operate from its internal rechargeable battery pack or from external AC power sources (115 V or 230 V). This flexibility allows technicians to perform field diagnostics even in locations without available power outlets. The device supports dual‑bus selection and can interact with Genius I/O modules for configuration, fault reset, and I/O forcing. These capabilities streamline system checkout and validation before full system integration. Technical Specifications Parameter Specification Model IC660HHM501 Product Type Hand‑Held Monitor Brand General Electric Product Range FANUC Condition New System Compatibility DCS / Genius I/O Display 4‑line LCD, 16 characters per line Keypad 20‑key sealed membrane Languages English, German, French, Italian Power Options Internal battery, 115 V AC, 230 V AC Security Operator access keyswitch Weight 0.45 kg Dimensions 20.4 × 9.3 × 3 cm HS Code 8537101190 Minimum Order 1 unit Origin USA Availability In stock Lifecycle Status Active Application Scenarios Field commissioning of Genius I/O networks On‑site diagnostics for distributed control systems Maintenance operations requiring portable configuration tools Pre‑deployment system verification without PLC connectivity FAQ Q: Can the monitor operate without external power? A: Yes. It includes an internal battery pack for portable use. Q: Does the unit support configuration of Genius I/O devices? A: It provides full access to device parameters, fault clearing, and I/O forcing. Q: Is the keypad suitable for harsh environments? A: The sealed membrane design protects against dust and moisture.
$200.00 $100.00
-
Bently Nevada Bently Nevada 330130-045-03-00 3300 XL 8 mm Probe
Product Overview The Bently Nevada 330130-045-03-00 3300 XL 8 mm Probe functions as a 5-meter extension cable within the 3300 XL proximity transducer system. It generates precise voltage outputs proportional to probe-to-target distances, enabling accurate measurement of static position and dynamic vibration. Its armored construction and gold-plated ClickLoc connectors ensure secure signal transmission and durability in harsh environments. Technical Specifications Parameter Value Model Number 330130-045-03-00 Module Type 3300 XL 8 mm Probe Manufacturer Bently Nevada Product Series 3300 Proximity Transducer System Condition Brand New Dimensions 27.3 × 27.3 × 3.5 cm Weight 0.46 kg HS Code 8537101190 System TSI Communication Service Ethernet Router Minimum Order Quantity 1 Origin USA Lead Time In Stock Status Active Cable Length 5 m Armored Connector Type Gold-Plated ClickLoc Operating Range -40°C to +177°C Certifications API 670, IP67 Compatibility 8 mm and 5 mm Probes Functional Description The 330130-045-03-00 maintains exceptional signal integrity across its entire length, ensuring accurate vibration and position monitoring. Its IP67 rating and patented strain relief guarantee long-term performance in demanding industrial environments. Engineers benefit from full backward compatibility with both current and legacy 3300 series components, simplifying upgrades and reducing inventory costs. Applications and Compatibility The 330130-045-03-00 3300 XL Probe suits fluid-film bearing machines, Keyphasor applications, and other critical rotating equipment. It integrates seamlessly with Bently Nevada monitoring systems, supporting predictive maintenance and centralized diagnostics. Compatibility with both 8 mm and 5 mm probes ensures flexible installation in space-constrained environments.
$200.00 $100.00
-
General Electricneral Electric General Electric PQMII‑T20‑C‑A Multilin Series Power Quality Monitor
Overview The PQMII‑T20‑C‑A is a compact, high‑precision power quality monitoring module from General Electric’s Multilin product line. Designed for detailed analysis of electrical distribution systems, it captures real‑time voltage, current, power, and energy data across single‑phase and three‑phase networks. Its measurement accuracy and broad diagnostic capabilities make it suitable for facilities that require continuous visibility into electrical performance. Functional Capabilities The monitor supports programmable setpoints and includes four configurable relay outputs, enabling automated responses such as load management, alarm signaling, or power factor optimization. Harmonic measurement capabilities allow the PQMII‑T20‑C‑A to detect distortion levels and identify sources of electrical disturbances, supporting preventive maintenance and equipment protection. Four digital inputs expand the module’s control and monitoring flexibility, allowing integration with external switches, status signals, or interlocking logic. Communication and Integration The device offers multiple communication interfaces for seamless integration into supervisory control systems. Dual RS‑485 ports support Modbus protocol for networked monitoring, while a front‑panel RS‑232 port provides direct access for configuration and data retrieval. The unit also includes four analog outputs (4–20 mA), enabling direct connection to PLCs or SCADA systems without additional transducers. Waveform capture and event recording provide valuable diagnostic data for troubleshooting voltage sags, swells, transients, and harmonic issues. These features make the PQMII‑T20‑C‑A a versatile tool for maintaining electrical system reliability. Technical Specifications Parameter Specification Model PQMII‑T20‑C‑A Product Type Power Quality Monitor Brand General Electric Product Range Multilin Series Measurement Functions Voltage, current, power, energy, harmonics Relay Outputs 4 programmable Digital Inputs 4 Analog Outputs 4 × 4–20 mA Communication Ports Dual RS‑485 (Modbus), RS‑232 front port Diagnostic Features Waveform capture, harmonic analysis Weight 0.04 kg Dimensions 5 × 1.3 × 4.4 cm HS Code 8537101190 Minimum Order 1 unit Origin USA Availability In stock Lifecycle Status Active Application Scenarios Power quality monitoring in industrial plants Energy management and load optimization Harmonic analysis for sensitive electronic equipment Integration with SCADA, PLC, and DCS systems Troubleshooting voltage disturbances and waveform anomalies FAQ Q: Does the PQMII‑T20‑C‑A support harmonic analysis? A: Yes. It provides detailed harmonic measurement for diagnosing distortion issues. Q: Can the device interface directly with PLCs? A: The four 4–20 mA analog outputs allow direct PLC integration without external converters. Q: What communication protocols are supported? A: Modbus via dual RS‑485 ports, plus an RS‑232 port for local configuration.
$200.00 $100.00
-
Bently Nevada Bently Nevada 330180-51-05 3300 XL 5/8 mm Proximitor Sensor
Product Overview The Bently Nevada 330180-51-05 3300 XL 5/8 mm Proximitor Sensor delivers precision vibration and position monitoring for critical machinery. Designed for the 3300 Series, this sensor meets API 670 standards, ensuring mechanical stability, linear range accuracy, and reliable performance in harsh environments. Technical Specifications Parameter Value Model Number 330180-51-05 Manufacturer Bently Nevada Module Type 3300 XL 5/8 mm Proximitor Sensor Product Range 3300 Series Condition Brand New Dimensions 8.6 × 3.4 × 7 cm Weight 0.2 kg HS Code 8537101190 Minimum Order Quantity 1 Origin USA System TSI Communication Interface Ethernet Router Status Active Pull Strength 330 N (75 lbf) Compliance API 670 mechanical standards Technology TipLoc and CableLoc designs Functional Description The Bently Nevada 330180-51-05 features TipLoc molding technology, which secures probe tips to bodies for maximum durability. Its CableLoc design provides 330 N pull strength, preventing cable detachment and ensuring stable connections. With compact dimensions of 8.6 cm length and lightweight 0.2 kg construction, the sensor integrates easily into industrial systems. Engineers benefit from its ability to maintain signal integrity under vibration, temperature fluctuations, and mechanical stress. Applications and Compatibility The Bently Nevada 330180-51-05 integrates seamlessly into the 3300 XL 8 mm proximity transducer system. Manufacturers deploy this sensor in oil & gas, chemical, and heavy machinery industries where vibration monitoring and position accuracy are critical. Its plug-and-play compatibility eliminates calibration requirements, reducing downtime and ensuring consistent accuracy across system components. Key Advantages API 670 compliance guarantees mechanical stability and linear range accuracy. TipLoc technology ensures strong bonding between probe tips and sensor bodies. CableLoc design delivers 330 N pull strength for secure connections. Compact dimensions simplify installation in space-constrained environments. Full interchangeability reduces calibration needs and streamlines maintenance.
$200.00 $100.00
-
Bently Nevada Bently Nevada 3500/05-01-02-01-00-01 System Rack
Product Overview The Bently Nevada 3500/05-01-02-01-00-01 System Rack is a vital component of the 3500 series monitoring system. Designed for industrial rotating equipment, it provides continuous vibration surveillance, advanced diagnostics, and reliable operation in harsh environments. Technical Specifications Parameter Value Model Number 3500/05-01-02-01-00-01 Manufacturer Bently Nevada Module Type System Rack Product Range 3500 System Condition Brand New Dimensions 48.2 × 28 × 26.5 cm Weight 5.95 kg HS Code 8537101190 Minimum Order Quantity 1 Origin USA System TSI Communication Interface Ethernet Router Status Active Monitoring Channels 4 independent channels Parameters Measured Velocity, acceleration, displacement Functional Description The Bently Nevada 3500/05-01-02-01-00-01 features four independent monitoring channels capable of processing multiple vibration parameters. Its compact 48.2 cm width and 26.5 cm height optimize cabinet space, while the 5.95 kg weight ensures stability. Engineers benefit from sophisticated algorithms that detect imbalance, misalignment, and bearing wear early, preventing costly downtime. Rugged construction guarantees reliable operation in demanding plant environments. Applications and Compatibility The Bently Nevada 3500/05-01-02-01-00-01 integrates seamlessly into the 3500 series framework, supporting multiple communication protocols and flexible configurations. Manufacturers deploy this system rack in power generation, oil and gas, and heavy industrial applications where equipment reliability is critical. Its compatibility with predictive maintenance programs enhances operational efficiency and machinery protection. Key Advantages Four monitoring channels process multiple vibration parameters simultaneously. Compact dimensions simplify installation in control cabinets. Rugged construction ensures durability in harsh industrial environments. Advanced algorithms enable early detection of common machinery faults. Seamless integration with the 3500 series enhances system flexibility.
$200.00 $100.00
-
Bently Nevada Bently Nevada 190501-01-00-01 Velomitor CT Transducer
Product Overview The Bently Nevada 190501-01-00-01 Velomitor CT Transducer safeguards turbines, compressors, and rotating machinery with precision vibration monitoring. Designed for continuous condition monitoring, this module detects early signs of imbalance, misalignment, and bearing wear, helping prevent costly failures. Technical Specifications Parameter Value Model Number 190501-01-00-01 Manufacturer Bently Nevada Module Type Velomitor CT Transducer Product Range Bently Nevada Condition Brand New Dimensions 19.6 × 16 × 8 cm Weight 0.98 kg HS Code 8537101190 Minimum Order Quantity 1 Origin USA System TSI Communication Interface Ethernet Router Status Active Certifications Industrial-grade compliance Protection Features False alarm prevention, signal interference shielding Functional Description The Bently Nevada 190501-01-00-01 integrates advanced signal processing technology to deliver accurate vibration data. Its rugged 19.6 cm length and 0.98 kg weight ensure durability while simplifying installation. Engineers benefit from its ability to operate reliably in temperature extremes and electrically noisy environments. Multiple protection mechanisms enhance system safety, making it ideal for mission-critical applications. Applications and Compatibility The Bently Nevada 190501-01-00-01 integrates seamlessly into existing monitoring systems across power generation, oil refineries, and heavy industries. Manufacturers deploy this transducer for predictive maintenance, real-time equipment protection, and continuous monitoring of high-value rotating machinery. Its robust design and compliance with certification standards guarantee dependable performance in harsh industrial environments. Key Advantages Compact dimensions optimize installation in monitoring cabinets. Lightweight design simplifies handling and integration. Advanced signal processing ensures accurate vibration analysis. Protection mechanisms reduce false alarms and interference. Rugged construction withstands harsh plant conditions. Ideal for predictive maintenance and real-time equipment protection.
$200.00 $100.00
-
Bently Nevada Bently Nevada 330103-05-12-10-01-00 3300 XL 8 mm Proximity Probes
Product Overview The Bently Nevada 330103-05-12-10-01-00 3300 XL 8 mm Proximity Probe belongs to the 3300 series. It provides precise vibration monitoring for turbines, compressors, and heavy industrial equipment. Its robust construction ensures reliability in harsh environments, while its compact dimensions and lightweight design simplify installation. Technical Specifications Parameter Value Model Number 330103-05-12-10-01-00 Module Type 3300 XL 8 mm Proximity Probe Manufacturer Bently Nevada Product Range 3300 Series Condition Brand New Dimensions 2 × 1.5 × 121 cm Weight 0.1 kg HS Code 8537101190 Minimum Order Quantity 1 Origin USA System TSI Communication Service Ethernet Router Status Active Dynamic Range ±10 V Output Signal 4–20 mA DC Compatibility Accelerometers, velocity transducers Firmware Field-upgradeable Design Modular, IIoT-ready Functional Description The 330103-05-12-10-01-00 probe delivers accurate displacement and vibration measurements with ±10V dynamic range and 4–20mA output. Its modular design supports integration with IIoT platforms while maintaining compatibility with legacy 3500 series installations. Facilities report faster detection of bearing faults and misalignment, improving predictive maintenance effectiveness. Applications and Compatibility The Bently Nevada 330103-05-12-10-01-00 Proximity Probe suits continuous process industries such as oil and gas, power generation, and manufacturing. Its sensitivity parameters optimize monitoring for both high-speed turbines and low-speed compressors. Operators integrate it seamlessly with control systems, gaining reliable protection against unplanned downtime. Key Benefits Compact 2x1.5x121cm dimensions simplify installation in restricted spaces. Lightweight 0.1kg design improves handling and replacement efficiency. ±10V dynamic range ensures precise vibration measurement. 4–20mA output supports integration with modern control systems. Modular design enables forward compatibility with IIoT platforms.
$200.00 $100.00
-
Bently Nevada Bently Nevada 3500/20-02-02-00 125744-01 TMR Rack Interface Module
Product Overview The Bently Nevada 3500/20-02-02-00 125744-01 TMR Rack Interface Module belongs to the 3500 system. It ensures uninterrupted communication in mission-critical automation environments by combining military-grade durability with advanced protocol conversion. Its compact design and robust construction guarantee reliable performance under extreme temperatures, vibration, and electromagnetic interference. Technical Specifications Parameter Value Model Number 3500/20-02-02-00 125744-01 Module Type TMR Rack Interface Module Manufacturer Bently Nevada Product Range 3500 System Condition Brand New Dimensions 24.3 × 4.6 × 15.5 cm Weight 0.55 kg HS Code 8537101190 Minimum Order Quantity 1 Origin USA System TSI Communication Service Ethernet Router Status Active Operating Temperature –40 °C to +70 °C Latency Architecture Dual-channel Diagnostics Built-in LEDs Protocol Translation Adaptive engine with optimized throughput Installation Plug-and-play, web-based configuration Functional Description The 3500/20-02-02-00 125744-01 module supports simultaneous operation of legacy and modern protocols through its dual-channel design. Intelligent data buffering prevents packet loss during congestion, while diagnostic LEDs provide instant communication status. Its adaptive protocol translation engine optimizes throughput and reduces processor load by up to 30%, ensuring efficient performance in hybrid industrial networks. Applications and Compatibility The Bently Nevada 3500/20-02-02-00 125744-01 TMR Rack Interface Module suits automotive manufacturing, smart grid infrastructure, and pharmaceutical clean rooms. It integrates seamlessly with the 3500 system, offering centralized monitoring and simplified maintenance. Operators rely on its proven reliability for connecting disparate control systems in food processing plants and wastewater treatment facilities. Key Benefits Compact 24.3x4.6x15.5cm design saves valuable panel space. Lightweight 0.55kg build simplifies installation and handling. Dual-channel architecture supports legacy and modern protocols simultaneously. Adaptive translation engine optimizes communication speeds under varying network conditions. Diagnostic LEDs provide instant visibility of communication channel status.
$200.00 $100.00
-
Bently Nevada Bently Nevada 3500/44-02-00 126623-01 Aero GT I/O Module
Product Overview The Bently Nevada 3500/44-02-00 126623-01 Aero GT I/O Module belongs to the 3500 system. It combines military-grade durability with advanced signal conditioning, ensuring precise control in mission-critical automation. Its compact DIN-rail mountable design saves panel space while providing easy access to configuration ports and status indicators. Technical Specifications Parameter Value Model Number 3500/44-02-00 126623-01 Module Type Aero GT I/O Module Manufacturer Bently Nevada Product Range 3500 System Condition Brand New Dimensions 2.5 × 11 × 24 cm Weight 0.38 kg HS Code 8537101190 Minimum Order Quantity 1 Origin USA System TSI Communication Service Ethernet Router Status Active Operating Temperature –20 °C to +70 °C Vibration Resistance Up to 5G Mounting DIN-rail or panel-mount Housing Material Aluminum Diagnostics Built-in self-test, predictive monitoring Functional Description The 3500/44-02-00 126623-01 module withstands vibration up to 5G and extreme temperatures from –20 °C to +70 °C. Its intelligent signal conditioning compensates for line resistance, maintaining <0.1% measurement accuracy. The aluminum housing ensures durability, while predictive diagnostics reduce downtime by up to 60% in continuous process applications. Applications and Compatibility The Bently Nevada 3500/44-02-00 126623-01 Aero GT I/O Module integrates seamlessly with PLCs, DCS systems, and legacy equipment. It suits industries such as automotive manufacturing, semiconductor fabrication, food processing, and pharmaceuticals. Its hybrid architecture supports both analog and digital I/O, offering flexibility for plant upgrades and expansions. Key Benefits Compact 2.5x11x24cm design saves valuable panel space. Lightweight 0.38kg build simplifies installation and handling. Robust aluminum housing resists vibration, heat, and electromagnetic interference. Predictive diagnostics enhance reliability and reduce unplanned downtime. Seamless integration with modern and legacy automation systems.
$200.00 $100.00
-
Bently Nevada Bently Nevada 330500-02-00 Velomitor Piezo-Velocity Sensor
Product Overview The Bently Nevada 330500-02-00 Velomitor Piezo-Velocity Sensor belongs to the 3300 Series, engineered for absolute vibration measurement in industrial machinery. Its solid-state design eliminates mechanical wear, ensuring long-term reliability. Compact dimensions of 2.5 × 2.5 × 7.3 cm and a weight of 0.14 kg make it suitable for installation in tight spaces. Operators benefit from accurate monitoring of bearing housings, casings, and structural vibration. Technical Specifications Parameter Value Model Number 330500-02-00 Module Type Velomitor Piezo-Velocity Sensor Manufacturer Bently Nevada Product Series 3300 Series Condition Brand New Dimensions 2.5 × 2.5 × 7.3 cm Weight 0.14 kg HS Code 8537101190 System TSI Communication Service Ethernet Router Minimum Order Quantity 1 Origin USA Lead Time In Stock Status Active Construction Solid-State, Piezoelectric Installation Options Vertical, Horizontal, Any Angle Functional Description The 330500-02-00 sensor delivers precise vibration measurements relative to free space, enabling predictive maintenance programs. Its embedded electronics ensure consistent performance without moving parts, reducing maintenance requirements. Engineers use this sensor to monitor displacement and vibration across turbines, compressors, and pumps. The rugged design resists environmental stress, ensuring reliable operation in demanding industrial environments. Applications and Compatibility The 330500-02-00 Velomitor Sensor integrates seamlessly with Bently Nevada monitoring systems, supporting predictive maintenance and centralized diagnostics. It suits industries such as power generation, petrochemical, and manufacturing. Its ability to install at any angle provides flexibility for complex machinery layouts, while compatibility with the 3300 Series ensures easy upgrades and replacements.
$200.00 $100.00
You have seen 768 out of 804 products