TSI (Turbomachinery Supervisory Instrumentation) systems monitor and protect rotating equipment. We supply modules, sensors, and spares to support both new and discontinued models. Our solutions help reduce downtime and protect critical assets.
TSI Monitoring Systems
-
EMERSON Emerson PR6424/002‑031 CON041 EPRO Monitoring Module
Overview The PR6424/002‑031 (CON041) module is part of Emerson’s EPRO vibration monitoring line, designed for precise non‑contact displacement and vibration measurement on critical rotating equipment. It integrates into condition monitoring and protection systems, providing stable, high‑resolution sensor signals for turbines, compressors, generators, and other high‑value rotating assets. Functional Characteristics This module operates as an eddy‑current proximity probe interface, converting raw sensor signals into conditioned outputs suitable for diagnostic and protection systems. Its internal circuitry ensures linear response, low noise, and stable operation across a wide temperature range. The design supports long‑term reliability in harsh industrial environments. Key Features High‑accuracy eddy‑current vibration and displacement measurement Compatible with EPRO/PR642x proximity probe systems Stable signal conditioning for continuous monitoring applications Robust mechanical design for demanding industrial environments Suitable for integration with Emerson and third‑party monitoring platforms Compact form factor for efficient panel or rack installation Technical Specifications Parameter Specification Model / Part Number PR6424/002‑031 / CON041 Product Type Eddy‑Current Vibration Monitoring Module Product Line EPRO Dimensions 17 × 14 × 3 cm Weight 0.34 kg Measurement Type Non‑contact displacement / vibration Sensor Compatibility PR642x proximity probe series Operating Temperature −35°C to +85°C (typical for EPRO modules) Output Signal Conditioned voltage output for monitoring systems Housing Material Industrial‑grade aluminum and polymer HS Code 8537101190 Country of Origin USA System Type DCS / Condition Monitoring Application Scenarios Vibration and displacement monitoring on rotating machinery Predictive maintenance systems in power generation and petrochemical plants Integration into machinery protection systems for critical assets Upgrades or replacements in existing EPRO/PR642x installations Additional Notes The module is engineered for long‑term stability and minimal drift, ensuring consistent measurement accuracy. It is commonly used in systems requiring early fault detection, such as bearing wear, shaft misalignment, and rotor instability. FAQ Q: Which sensors are compatible with this module A: It is designed for use with the PR642x series eddy‑current proximity probes. Q: Can it be used with non‑Emerson monitoring systems A: Yes. The conditioned output is compatible with many third‑party vibration monitoring platforms. Q: Does this module include the probe and extension cable A: No. Probes and cables must be ordered separately.
$200.00 $100.00
-
Bently Nevada Bently Nevada 330101‑00‑13‑15‑12‑CN 3300 XL Proximity Probe
Overview The Bently Nevada 330101‑00‑13‑15‑12‑CN proximity probe is part of the 3300 XL 8 mm transducer family, engineered for precise non‑contact measurement of shaft vibration and displacement in rotating machinery. Its compact mechanical design and stable electrical characteristics make it suitable for installations where space is limited but high‑accuracy monitoring is required. Design and Construction This probe uses a 3/8‑24 UNF threaded body and includes a 1.5‑meter molded cable equipped with a miniature coaxial ClickLoc connector. The ClickLoc mechanism prevents accidental loosening and maintains shielding integrity, ensuring consistent signal transmission even in electrically noisy environments. The 330101‑00‑13‑15‑12‑CN features a non‑armored configuration with a short case length, allowing installation in tight mounting locations without compromising measurement accuracy. The FluidLoc cable design provides additional protection against moisture ingress and mechanical stress. Technical Specifications Parameter Specification Model 330101‑00‑13‑15‑12‑CN Probe Type 3300 XL 8 mm Proximity Probe Thread Type 3/8‑24 UNF Unthreaded Length 0.0 in Case Length 1.3 in Cable Length 1.5 m Connector Miniature coaxial ClickLoc Cable Type FluidLoc Measurement Type Static position and dynamic vibration System Compatibility 3300 XL Proximity Transducer System Weight 0.06 kg Dimensions 1.8 × 1.6 × 123 cm HS Code 8537101190 Origin USA Minimum Order 1 unit Product Status Active System TSI Performance Characteristics The probe generates a voltage output proportional to the distance between the probe tip and the target surface, enabling accurate gap and vibration measurements. Its compact geometry supports installation in restricted spaces while maintaining the durability and performance expected from the 3300 XL series. The 330101‑00‑13‑15‑12‑CN is suitable for hazardous‑area installations and provides stable long‑term performance in environments with high electromagnetic interference. Application Scenarios Turbine, compressor, and generator vibration monitoring Shaft displacement and axial position measurement Installations requiring compact probe geometry Predictive maintenance and machinery protection systems High‑EMI industrial environments requiring stable signal transmission FAQ Q: What makes this probe suitable for tight installations Its short case length and non‑armored design allow mounting in confined spaces without affecting measurement accuracy. Q: Is this probe compatible with standard 3300 XL extension cables Yes. It integrates seamlessly with the full 3300 XL transducer system. Q: Does the FluidLoc cable improve reliability Yes. It enhances moisture resistance and protects the cable from mechanical stress.
$200.00 $100.00
-
Bently Nevada Bently Nevada 330104‑00‑05‑05‑11‑05 3300 XL Proximity Probe
Overview The Bently Nevada 330104‑00‑05‑05‑11‑05 proximity probe is part of the 3300 XL 8 mm transducer family, engineered for high‑accuracy non‑contact measurement of shaft vibration and displacement in rotating machinery. Its armored construction and enhanced mechanical durability make it suitable for harsh industrial environments where long‑term reliability is essential. Design and Construction This probe features an M10×1 threaded housing and a molded PPS sensing tip. The PPS material provides increased encapsulation thickness around the coil, improving resistance to mechanical impact and environmental stress. The probe includes a 1.0‑meter FluidLoc cable equipped with an 11‑series miniature coaxial ClickLoc connector and a connector protector to maintain shielding integrity. The 330104‑00‑05‑05‑11‑05 is designed for seamless integration with the 3300 XL Proximitor Sensor and extension cables, forming a complete eddy‑current transducer system capable of delivering stable, repeatable measurements. Technical Specifications Parameter Specification Model 330104‑00‑05‑05‑11‑05 Probe Type 3300 XL 8 mm Proximity Probe Thread Type M10×1 Minimum Case Length 50 mm Cable Length 1.0 m (FluidLoc armored cable) Connector 11‑series miniature coaxial ClickLoc Tip Material PPS (Polyphenylene Sulfide) Measurement Type Static position and dynamic vibration System Compatibility 3300 XL Proximity Transducer System Backward Compatibility Non‑XL 5 mm and 8 mm probes (with proper bend radius) Certifications CSA, ATEX, IECEx Weight 0.55 kg Dimensions 20.5 × 22.4 × 3.3 cm HS Code 8537101190 Origin USA Minimum Order 1 unit Product Status Active System TSI Performance Characteristics The probe is part of the 3300 XL platform, which eliminates the need for matched calibration between probes, cables, and Proximitor sensors. This ensures consistent linearity, temperature stability, and measurement accuracy across the entire system. The armored cable design enhances mechanical protection, making the probe suitable for high‑vibration or physically exposed installations. When installed with the proper minimum bend radius, the probe can be interchanged with non‑XL 3300 series components without compromising performance. Application Scenarios Turbine and compressor vibration monitoring Shaft displacement and axial position measurement High‑vibration industrial environments requiring armored probes API‑compliant machinery protection systems Installations requiring backward compatibility with legacy 3300 components FAQ Q: Can this probe replace older 3300 series 5 mm or 8 mm probes Yes. It is backward‑compatible when installed with the correct cable bend radius. Q: What advantages does the PPS tip provide The thicker encapsulation improves durability and protects the sensing coil from mechanical damage. Q: Does the probe require matched calibration with its Proximitor sensor No. The 3300 XL system is designed for full interchangeability without matched component sets.
$200.00 $100.00
-
Bently Nevada Bently Nevada 330101‑00‑24‑10‑02‑00 3300 XL Proximity Probe
Overview The Bently Nevada 330101‑00‑24‑10‑02‑00 proximity probe is part of the 3300 XL 8 mm transducer family, designed for precise non‑contact measurement of shaft vibration and position in rotating machinery. Its mechanical robustness and stable electrical characteristics make it suitable for long‑term use in demanding industrial environments. Design and Construction This probe uses a 3/8‑24 UNF threaded body and includes a 1.0‑meter molded cable terminated with a miniature coaxial ClickLoc connector. The connector design prevents accidental loosening and maintains shielding integrity, ensuring consistent signal transmission to the Proximitor sensor. Compared with 5 mm probes, the 330101‑00‑24‑10‑02‑00 features a thicker encapsulation and reinforced case structure, improving durability in high‑vibration or mechanically exposed installations. The probe is available in armored and unarmored configurations, offering flexibility for different mounting and routing requirements. Technical Specifications Parameter Specification Model 330101‑00‑24‑10‑02‑00 Probe Type 3300 XL 8 mm Proximity Probe Thread Type 3/8‑24 UNF Cable Length 1.0 m Connector Miniature coaxial ClickLoc Measurement Type Static position and dynamic vibration System Compatibility 3300 Proximity Transducer System Weight 0.06 kg Dimensions 1.8 × 1.6 × 123 cm HS Code 8537101190 Origin USA Minimum Order 1 unit Product Status Active System TSI Performance Characteristics The probe produces a voltage output proportional to the distance between the probe tip and the target surface, enabling accurate displacement and vibration measurements. It is suitable for fluid‑film bearing machines and supports Keyphasor reference and speed measurement applications. The 330101‑00‑24‑10‑02‑00 is fully interchangeable with other 3300 XL components and backward‑compatible with non‑XL 5 mm and 8 mm probes, eliminating the need for matched calibration and simplifying system maintenance. Application Scenarios Radial vibration and shaft displacement monitoring Axial position measurement on turbines and compressors Keyphasor reference signal acquisition Speed measurement on rotating machinery High‑vibration industrial environments requiring durable probe construction FAQ Q: Is this probe compatible with older 3300 series components? A: Yes. It can be used with non‑XL 5 mm and 8 mm probes and cables without requiring matched calibration. Q: What type of machines typically use this probe? A: Turbines, compressors, pumps, and other rotating equipment with fluid‑film bearings. Q: Does the probe require a specific Proximitor sensor? A: For optimal accuracy, it should be paired with a 3300 XL Proximitor sensor.
$200.00 $100.00
-
Bently Nevada Bently Nevada 330730‑040‑02‑00 3300 Series Extension Cable
Overview The Bently Nevada 330730‑040‑02‑00 extension cable is designed for use within the 3300 proximity transducer system, providing reliable signal transmission between proximity probes and associated monitoring hardware. This model supports 11 mm transducer configurations and is suitable for applications requiring extended linear measurement ranges. Design and Construction The cable is manufactured to maintain stable electrical characteristics across its entire length, ensuring accurate displacement and vibration data. With a 2‑meter cable length, the 330730‑040‑02‑00 offers flexibility for installations where probe‑to‑monitor distances vary. Its construction includes anti‑static protection on terminals and connectors, reducing the risk of electrostatic discharge during installation and maintenance. The cable is intended for use with the 3300 XL platform and is not interchangeable with older 7200‑series components without a full system upgrade. Its mechanical design supports straightforward routing in confined spaces, aided by its lightweight 0.06 kg profile. Technical Specifications Parameter Specification Model 330730‑040‑02‑00 Cable Type Extension Cable for 3300 Proximity Transducer System Length 2 m Transducer Compatibility 11 mm 3300 XL systems Frequency Response 0 to 8 kHz Output Sensitivity (System) 3.94 V/mm (with compatible components) Weight 0.06 kg Dimensions 1.8 × 1.6 × 123 cm HS Code 8537101190 Origin USA Minimum Order 1 unit Product Status Active System TSI Performance Characteristics The 330730‑040‑02‑00 supports both static and dynamic measurements, making it suitable for axial position, radial vibration, and Keyphasor reference applications. Its electrical performance is optimized for the extended linear range of 11 mm systems, offering greater measurement flexibility compared to standard 8 mm configurations. The cable does not require agency approvals but is built to Bently Nevada’s established quality standards for industrial monitoring components. Application Scenarios Axial position monitoring on large rotating machinery Keyphasor signal transmission Radial vibration measurement on fluid‑film bearing equipment Installations requiring extended linear range performance System upgrades from legacy transducer platforms to 3300 XL FAQ Q: Can this cable be used with 7200‑series transducers? A: No. A full upgrade to the 3300 XL system is required for compatibility. Q: What measurement types does this cable support? A: It supports displacement, vibration, and Keyphasor reference signals when used with compatible probes and drivers. Q: Does the cable require special handling? A: While anti‑static protection is included, standard ESD precautions are recommended during installation.
$200.00 $100.00
-
Bently Nevada Bently Nevada 16710‑21 | Interconnect Cable | Monitoring System Wiring
Overview The Bently Nevada 16710‑21 interconnect cable is engineered for high‑integrity signal transmission within machinery protection and condition monitoring systems. Designed to meet the electrical and environmental demands of industrial facilities, the cable ensures stable communication between sensors, modules, and monitoring hardware. Its construction supports long‑distance routing while maintaining low noise, low capacitance, and excellent shielding performance. Key Characteristics Two twisted pairs of 24 AWG stranded copper conductors Dual‑layer shielding for superior EMI/RFI protection Low capacitance and controlled impedance for accurate signal transfer Suitable for vibration monitoring, data acquisition, and protection systems Manufactured to Bently Nevada’s reliability standards for harsh environments Technical Specifications Parameter Specification Model / Part Number 16710‑21 Cable Type Interconnect / Extension Cable Conductor Type 24 AWG stranded copper Conductor Configuration 2 twisted pairs Shielding Individual foil shields + overall 90% copper braid Characteristic Impedance 100 Ω ±15% at 1 kHz Capacitance ≤35 pF/ft (between pairs) Voltage Rating 300 V AC/DC Conductor Resistance ≤28 Ω per 1000 ft Weight 0.06 kg Dimensions 1.8 × 1.6 × 123 cm System Compatibility Bently Nevada monitoring and protection systems Condition Brand New Origin USA MOQ 1 HS Code 8537101190 Functional Description The 16710‑21 cable is designed to maintain signal fidelity in electrically noisy industrial environments. Its dual‑shield architecture—foil shielding for each twisted pair combined with an overall copper braid—minimizes electromagnetic interference, ensuring accurate data transmission for vibration and condition monitoring systems. The cable’s low capacitance and controlled impedance make it suitable for high‑precision measurement circuits, where signal distortion must be minimized. Its 300 V rating and low conductor resistance support robust performance across long cable runs. Engineered for reliability, the cable withstands temperature variations, mechanical stress, and industrial contaminants. It integrates seamlessly with Bently Nevada monitoring hardware, making it a dependable choice for power generation, oil & gas, and manufacturing applications. Application Scenarios Vibration monitoring systems Machinery protection circuits Data acquisition modules Sensor‑to‑monitor interconnections Industrial environments requiring high EMI immunity FAQ Q: Is this cable suitable for long‑distance signal transmission? A: Yes. Its low capacitance and controlled impedance maintain signal integrity over extended runs. Q: What type of shielding does the cable use? A: Each twisted pair has its own foil shield, plus an overall 90% copper braid for enhanced EMI protection. Q: Can this cable be used in high‑noise environments? A: Yes. It is specifically designed for electrically noisy industrial settings.
$200.00 $100.00
-
Bently Nevada Bently Nevada 21000-28-05-00-041-03-02 Vibration Monitoring Module
Overview The Bently Nevada 21000-28-05-00-041-03-02 is a precision monitoring module developed for the 21000 Series machinery protection and condition monitoring system. It is designed to process vibration and displacement signals from rotating equipment where long-term stability, signal integrity, and system reliability are critical. This module performs front-end signal conditioning for Bently Nevada transducers, ensuring accurate conversion of raw sensor signals into stable, system-ready monitoring outputs. Its electrical and mechanical design supports continuous operation in electrically noisy and mechanically demanding industrial environments. The 21000-28-05-00-041-03-02 is commonly deployed in turbine supervisory instrumentation (TSI) and machinery protection architectures, supporting early fault detection and operational safety for high-value rotating assets. Key Functional Characteristics The module incorporates precision filtering, linearization, and conditioning circuitry tailored for proximity and vibration measurement applications. Its internal architecture is optimized to maintain measurement accuracy across temperature variation, supply fluctuation, and long service intervals. Designed for seamless installation in 21000 Series racks, the module supports rapid system integration and consistent channel performance across multi-slot monitoring systems. Technical Specifications General Information Brand: Bently Nevada Series: 21000 Monitoring System Model: 21000-28-05-00-041-03-02 Module Category: Signal Conditioning / Monitoring Module Manufacturing Origin: United States Product Condition: New Electrical Specifications Sensor Compatibility: Bently Nevada proximity probes Vibration transducers (configuration dependent) Signal Processing: Built-in filtering Linearization for accurate displacement and vibration measurement Output Interface: System-standard monitoring signal compatible with 21000 racks Power Supply: Provided through 21000 Series backplane Noise Immunity: High resistance to EMI and RFI in industrial environments Mechanical Specifications Mounting Method: 21000 Series rack / module slot Enclosure: Industrial-grade metal housing Weight: 1.48 kg Dimensions: 28 × 26 × 6 cm Environmental Performance Operating Environment: Control room and industrial cabinet installation Temperature Range: Suitable for continuous industrial operation Humidity Tolerance: Designed for high-humidity plant conditions Compliance: Meets applicable international safety and EMC requirements Certifications depend on system configuration (CSA / ATEX / IECEx) System Compatibility Fully interoperable with Bently Nevada 21000 Series monitoring racks Supports proximity, velocity, or acceleration-based measurement depending on transducer selection Suitable for integration into TSI and machinery protection systems Typical Application Areas Steam and gas turbine monitoring Centrifugal and axial compressors Large industrial pumps and motors Gearboxes and generators Critical rotating machinery requiring continuous vibration or displacement supervision FAQ What type of measurements does this module support? The 21000-28-05-00-041-03-02 supports vibration and position measurements when paired with compatible Bently Nevada proximity probes or vibration sensors. Is this module interchangeable with other 21000 Series cards? Functionally similar modules may exist within the 21000 Series, but interchangeability depends on signal type, channel configuration, and system design. Always verify compatibility at the application level. Can it be used in safety-critical machinery protection systems? Yes. When installed within a properly configured 21000 Series system, the module is suitable for continuous monitoring and protection of critical rotating equipment.
$200.00 $100.00
-
Bently Nevada Bently Nevada 330104‑00‑20‑10‑01‑05 | 3300 XL Series | 8 mm Proximity Probe
Overview The Bently Nevada 330104‑00‑20‑10‑01‑05 proximity probe is part of the 3300 XL 8 mm transducer family, engineered for accurate displacement and vibration measurement in fluid‑film bearing machinery. Its armored construction and reinforced PPS sensing tip provide enhanced durability for installations exposed to mechanical stress, contamination, or elevated temperatures. Key Characteristics 8 mm probe tip with molded PPS encapsulation for improved coil protection M10 × 1 threaded stainless‑steel housing with armor 1.5‑meter integrated coaxial cable with ClickLoc miniature connector Designed for static position, dynamic vibration, and Keyphasor reference measurements Fully interchangeable with 3300 XL and legacy 3300 5 mm / 8 mm components Suitable for hazardous environments with CSA, ATEX, and IECEx approvals Optimized for long‑term reliability in demanding industrial applications Technical Specifications Parameter Specification Model / Part Number 330104‑00‑20‑10‑01‑05 Probe Type 3300 XL 8 mm Proximity Probe Thread Size M10 × 1 Housing Stainless steel with armor Tip Material PPS molded plastic Cable Length 1.5 m (4.9 ft) Connector Type Miniature coaxial ClickLoc Measurement Principle Eddy‑current displacement Output Voltage proportional to probe‑target gap Interchangeability XL and non‑XL 3300 5 mm / 8 mm systems Certifications CSA, ATEX, IECEx Weight 0.06 kg Dimensions 1.8 × 1.6 × 123 cm System Compatibility 3300 XL Proximity Transducer System Condition Brand New Origin USA MOQ 1 HS Code 8537101190 Functional Description The 330104‑00‑20‑10‑01‑05 probe is engineered for high‑accuracy eddy‑current displacement measurement. Its armored cable and reinforced PPS tip provide mechanical protection in harsh environments, while the M10 × 1 threaded body supports secure installation in confined or high‑vibration locations. The probe forms part of a three‑component transducer system—probe, extension cable, and Proximitor sensor. When installed as a matched set, it delivers precise monitoring of: Shaft radial vibration Axial position Thermal growth Keyphasor phase reference Speed measurement The probe’s electrical and physical interchangeability with legacy 3300 components simplifies system upgrades and maintenance. Its hazardous‑area certifications support deployment in oil & gas, power generation, and process industries. Application Scenarios Steam and gas turbines Centrifugal compressors Industrial pumps and fans Gearboxes and generators Machinery requiring armored probe construction FAQ Q: Can this probe replace older 3300 5 mm or 8 mm probes? A: Yes. It is electrically and mechanically compatible when installed with matched cable lengths. Q: What advantage does the armored version provide? A: Armor protects the cable from abrasion, mechanical impact, and routing stress. Q: Is this probe suitable for hazardous locations? A: Yes. It carries CSA, ATEX, and IECEx approvals.
$200.00 $100.00
-
Bently Nevada Bently Nevada 3300 XL Series 330103-06-10-10-02-05 | 8 mm Proximity Probe
Overview The 330103-06-10-10-02-05 proximity probe is part of Bently Nevada’s 3300 XL 8 mm transducer system, designed for high‑accuracy vibration and shaft displacement monitoring in rotating machinery. Its reinforced probe tip, extended unthreaded length, and rugged mechanical construction make it suitable for installations requiring enhanced durability and long‑term measurement stability. Technical Specifications Parameter Value Model Number 330103-06-10-10-02-05 Product Type 8 mm Proximity Probe Series 3300 XL Proximity Transducer System Manufacturer Bently Nevada Condition Brand New Thread Type M10 × 1 Unthreaded Length 60 mm Case Length 100 mm Cable Length 1.0 m Connector Type Miniature coaxial ClickLoc Probe Tip Material Molded PPS (reinforced encapsulation) Measurement Type Static position + dynamic vibration Certifications CSA, ATEX, IECEx Dimensions 1.8 × 1.5 × 113 cm Weight 0.08 kg Origin USA HS Code 8537101190 Availability In Stock MOQ 1 Key Features Precision 8 mm eddy‑current probe for displacement and vibration monitoring. M10 × 1 threaded body with extended unthreaded section for deeper mounting requirements. Reinforced PPS probe tip improves coil protection and mechanical robustness. ClickLoc connector ensures secure, vibration‑resistant electrical connections. Fully compatible with 3300 XL Proximitor sensors for seamless integration. Certified for global hazardous‑area applications under CSA, ATEX, and IECEx. Suitable for high‑temperature, high‑vibration, and oil‑contaminated environments. Application Scenarios Turbine and compressor shaft vibration monitoring Pump and motor displacement measurement Machinery protection systems requiring robust probe construction Hazardous‑area installations in petrochemical and power generation sectors Predictive maintenance programs requiring long‑term measurement stability FAQ Q: What advantage does the reinforced PPS probe tip provide? A: It increases resistance to mechanical wear and environmental exposure, improving long‑term reliability. Q: Is this probe compatible with older 3300 series components? A: It is designed for the 3300 XL system; compatibility with non‑XL components depends on system configuration. Q: Does the probe require matched calibration? A: No. 3300 XL components are designed for full interchangeability without individual calibration.
$200.00 $100.00
-
Bently Nevada Bently Nevada 16925-12 | Interconnect Cable for Monitoring Systems
Overview The 16925-12 interconnect cable is a coaxial signal cable engineered by Bently Nevada for use in vibration and condition‑monitoring systems on rotating machinery. Its construction supports stable, low‑noise signal transmission in electrically noisy industrial environments, making it suitable for high‑reliability monitoring architectures. Technical Specifications Parameter Value Model Number 16925-12 Product Type Interconnect Cable Manufacturer Bently Nevada Condition Brand New Cable Length 12 ft (approx. 3.7 m) Conductor Material Tinned copper Insulation Polyethylene Shielding Copper braid Jacket Material PVC Operating Temperature –40 °C to +85 °C Capacitance ≤100 pF/m Impedance 5–10 kΩ Weight 0.06 kg Dimensions 1.8 × 1.6 × 123 cm Origin USA HS Code 8537101190 Availability In Stock MOQ 1 Key Features Coaxial cable designed for vibration and condition‑monitoring systems. Tinned copper conductors and polyethylene insulation ensure stable electrical performance. Copper braid shielding minimizes electromagnetic interference in industrial environments. PVC outer jacket provides mechanical protection and flexibility for routing. Maintains signal integrity across a wide temperature range. Suitable for predictive maintenance systems requiring accurate, noise‑resistant data transmission. Available in multiple lengths for system design flexibility. Application Scenarios Vibration monitoring systems on rotating machinery Condition‑monitoring installations in power generation and oil & gas Industrial environments with high EMI exposure Machinery skids requiring flexible cable routing Predictive maintenance systems needing stable, low‑noise signal paths FAQ Q: Is the 16925‑12 suitable for high‑EMI environments? A: Yes. Its copper braid shielding provides strong protection against electromagnetic interference. Q: Can this cable be used in low‑temperature applications? A: The 16925‑12 operates reliably down to –40 °C. Q: Is this cable compatible with all Bently Nevada monitoring systems? A: It is designed for interconnect use within Bently Nevada vibration and condition‑monitoring architectures.
$200.00 $100.00
-
Bently Nevada Bently Nevada 3300 XL Series 330103-02-12-05-02-05 | 8 mm Proximity Probe
Overview The 330103-02-12-05-02-05 proximity probe is part of Bently Nevada’s 3300 XL 8 mm eddy‑current transducer family, engineered for precise shaft vibration and position measurement in high‑value rotating equipment. Designed for demanding industrial environments, this probe provides stable, linear output proportional to the probe‑to‑target gap, supporting both static and dynamic monitoring requirements. Technical Specifications Parameter Value Model Number 330103-02-12-05-02-05 Product Type 8 mm Proximity Probe Series 3300 XL Proximity Transducer System Manufacturer Bently Nevada Condition Brand New Thread Type M10 × 1 Case Length 120 mm minimum Unthreaded Length 20 mm Cable Length 0.5 m Connector Type Miniature coaxial ClickLoc Measurement Type Static position + dynamic vibration Compliance API 670 mechanical and performance requirements Certifications CSA, ATEX, IECEx Compatibility Fully interchangeable with 3300 XL and non‑XL 5 mm / 8 mm components Application Use Fluid‑film bearing machines, Keyphasor, speed measurement Dimensions 28 × 26 × 6 cm Weight 1.48 kg Origin USA HS Code 8537101190 Availability In Stock MOQ 1 Key Features High‑accuracy eddy‑current probe designed for critical rotating machinery. M10 × 1 threaded housing supports secure installation in standard probe mounts. 20 mm unthreaded section improves mounting flexibility in deep or recessed housings. 0.5 m cable with ClickLoc connector ensures stable, vibration‑resistant electrical connections. Fully API 670‑compliant linearity, accuracy, and temperature stability. Certified for hazardous locations, suitable for oil & gas, power generation, and heavy industry. Interchangeable components eliminate matched calibration requirements, reducing maintenance time. Reliable performance for Keyphasor reference and speed measurement applications. Application Scenarios Turbine and compressor shaft vibration monitoring Pump and motor displacement measurement High‑temperature or hazardous‑area machinery installations Predictive maintenance programs requiring precise displacement data Keyphasor phase reference and rotational speed measurement FAQ Q: Does this probe require matched calibration with its extension cable? A: No. The 330103-02-12-05-02-05 is fully interchangeable with 3300 XL components without matched calibration. Q: Is this probe suitable for hazardous environments? A: Yes. It carries CSA, ATEX, and IECEx approvals for classified industrial areas. Q: What applications benefit from the 20 mm unthreaded section? A: It is ideal for installations requiring deeper insertion or where threaded engagement must be limited.
$200.00 $100.00
-
Bently Nevada Bently Nevada 3300 XL Series 330104-00-25-10-12-00 | 8 mm Proximity Probe
Overview The 330104-00-25-10-12-00 proximity probe is part of Bently Nevada’s 3300 XL 8 mm transducer family, engineered for precise displacement and vibration measurement on rotating and reciprocating machinery. Its armored M10 × 1 threaded body and extended 250 mm case length support installations requiring additional mechanical reach and enhanced durability. Technical Specifications Parameter Value Model Number 330104-00-25-10-12-00 Product Type 8 mm Proximity Probe Series 3300 XL Proximity Transducer System Manufacturer Bently Nevada Condition Brand New Thread Type M10 × 1 Case Length 250 mm Unthreaded Length 0 mm Cable Length 1.0 m Connector Type Miniature coaxial ClickLoc Cable Type FluidLoc oil‑blocking cable Scale Factor 7.87 V/mm (200 mV/mil) Linear Range 1.5 mm Target Sensitivity Enhanced side‑view capability Dimensions 20.3 × 22 × 3.5 cm Weight 0.14 kg Origin USA HS Code 8537101190 Availability In Stock MOQ 1 Key Features High‑accuracy eddy‑current probe optimized for displacement and vibration monitoring. Armored construction provides mechanical protection in harsh operating environments. Extended 250 mm case length supports installations requiring deeper probe insertion. Standard 200 mV/mil output compatible with 3300 XL Proximitor sensors. Improved side‑view sensitivity for applications with small or narrow targets. Fully interchangeable with non‑XL 3300 series 5 mm and 8 mm probes. Lightweight design simplifies installation without compromising robustness. No agency approvals required, enabling rapid deployment. Application Scenarios Turbine and compressor shaft vibration monitoring Reciprocating machinery displacement measurement Gearbox and bearing condition monitoring Installations requiring long‑reach probe housings Machinery protection systems using 3300 XL architecture FAQ Q: What advantage does the 250 mm case length provide? A: It allows the 330104-00-25-10-12-00 to be installed in deeper probe wells or housings where shorter probes cannot reach the target surface. Q: Is this probe compatible with older 3300 series components? A: Yes. It is fully interchangeable with non‑XL 5 mm and 8 mm probes, though mixed systems operate at non‑XL performance levels. Q: Does the probe require special certification for installation? A: No. This model does not require agency approvals, simplifying procurement and installation.
$200.00 $100.00
-
Bently Nevada Bently Nevada 3300 XL Series 330102-00-20-05-01-05 | 8 mm Proximity Probe
Overview The 330102-00-20-05-01-05 proximity probe is part of Bently Nevada’s 3300 XL 8 mm transducer family, designed for precise shaft vibration and position measurement in rotating machinery. Its compact form factor and reinforced construction make it suitable for installations where space is limited but high‑accuracy displacement monitoring is required. Technical Specifications Parameter Value Model Number 330102-00-20-05-01-05 Product Type 8 mm Proximity Probe Series 3300 XL Proximity Transducer System Manufacturer Bently Nevada Condition Brand New Probe Tip Diameter 8 mm Cable Length 2.0 m Connector Type Coaxial ClickLoc Compliance API 670 mechanical and performance requirements Dimensions 1.8 × 1.6 × 123 cm Weight 0.06 kg Operating System TSI Origin USA HS Code 8537101190 Availability In Stock MOQ 1 Key Features High‑precision eddy‑current probe optimized for vibration and shaft position monitoring. Fully compatible with all 3300 XL 8 mm extension cables and Proximitor sensors. Backward‑compatible with legacy 3300 series components, eliminating matched calibration requirements. Stable linearity and temperature performance meeting API 670 standards. Compact design suitable for installations with limited mounting space. Durable construction for long‑term reliability in harsh industrial environments. Application Scenarios Turbine and compressor shaft displacement monitoring Pump and motor vibration analysis Machinery protection systems requiring API‑compliant transducers Hazardous‑area installations requiring certified components FAQ Q: Does this probe require calibration with a specific extension cable? A: No. The 330102-00-20-05-01-05 is designed for full interchangeability within the 3300 XL system, eliminating matched calibration. Q: Is this probe suitable for hazardous environments? A: Yes. The 3300 XL series is certified for use in classified industrial areas. Q: What applications benefit most from the 8 mm probe size? A: It is ideal for machinery where moderate tip diameter is required but installation space is restricted.
$200.00 $100.00
-
Bently Nevada Bently Nevada 330101‑00‑40‑10‑02‑05 | 3300 XL Series 8 mm Proximity Probe
Overview The Bently Nevada 330101‑00‑40‑10‑02‑05 is an 8 mm eddy‑current proximity probe engineered for precise non‑contact measurement of shaft vibration and displacement. As part of the 3300 XL Proximity Transducer System, it provides stable linearity, excellent temperature performance, and long‑term reliability for critical rotating machinery. Design and Construction This probe generates a voltage proportional to the distance between the probe tip and a conductive target surface, enabling both static position and dynamic vibration measurements. It is widely used in fluid‑film bearing machines, Keyphasor® reference points, and speed measurement applications. The 330101‑00‑40‑10‑02‑05 supports full interchangeability of the probe, extension cable, and Proximitor® Sensor—no bench calibration or component matching is required. The XL Proximitor Sensor enhances linearity and temperature stability compared to earlier generations and includes an integral isolation base, eliminating the need for separate isolator plates. The probe incorporates Bently Nevada’s patented TipLoc™ bonding method for a reinforced probe tip and CableLoc™ technology providing 330 N (75 lbf) pull strength on the cable. A 3/8‑24 UNF threaded body, 1.0 m standard cable, and miniature ClickLoc coaxial connector ensure secure installation and reliable signal transmission. The probe carries CSA, ATEX, and IECEx approvals for hazardous‑area use. Technical Specifications Parameter Specification Model / Part Number 330101‑00‑40‑10‑02‑05 Probe Type 3300 XL 8 mm Proximity Probe Thread Size 3/8‑24 UNF Cable Length 1.0 m Cable Features CableLoc™ reinforcement Pull Strength 330 N (75 lbf) Connector Miniature coaxial ClickLoc Isolation Integrated isolation base System Compatibility 3300 XL Proximity Transducer System Certifications CSA, ATEX, IECEx Measurement Capability Static position + dynamic vibration Operating Temperature –35 °C to +120 °C (typical) Storage Temperature –51 °C to +177 °C Weight 0.55 kg Dimensions 20.5 × 22.4 × 3.3 cm Origin USA Condition Brand New Availability In Stock HS Code 8537101190 System TSI compatible Functional Description The 330101‑00‑40‑10‑02‑05 probe provides accurate displacement and vibration measurements essential for machinery protection systems. Its advanced mechanical reinforcement and improved sensor linearity make it suitable for high‑vibration environments and applications requiring long‑term stability. The probe’s compatibility with both XL and non‑XL 3300‑series components simplifies system upgrades and maintenance. Its rugged construction and hazardous‑area approvals make it a dependable choice for refineries, power plants, and heavy industrial facilities. Application Areas Steam and gas turbines Centrifugal and reciprocating compressors Gearboxes and industrial motors Fluid‑film bearing machines Keyphasor® and speed reference points Hazardous‑area installations FAQ Q: Does this probe require component matching? No. It is fully interchangeable with XL and non‑XL components without recalibration. Q: What makes TipLoc™ and CableLoc™ beneficial? TipLoc™ strengthens the probe tip bond, while CableLoc™ increases cable pull strength for improved durability. Q: Is this probe certified for hazardous areas? Yes. It carries CSA, ATEX, and IECEx approvals. Q: What measurements does this probe support? It provides both static shaft position and dynamic vibration signals.
$200.00 $100.00
-
Bently Nevada Bently Nevada 330102‑00‑24‑50‑02‑00 | 3300 Series 8 mm Vibration Sensor Probe
Overview The Bently Nevada 330102‑00‑24‑50‑02‑00 vibration sensor probe is an 8 mm eddy‑current proximity probe designed for precise non‑contact measurement of shaft vibration and displacement. As part of the 3300 Proximity Transducer System, it delivers high‑accuracy static and dynamic readings essential for machinery protection and condition monitoring in critical rotating equipment. Functional Characteristics This probe generates a voltage proportional to the distance between the probe tip and a conductive target surface, enabling accurate measurement of shaft position, radial vibration, and Keyphasor reference signals. It is engineered for use with complete 3300 XL 8 mm component sets to ensure full system accuracy and interchangeability. For optimal performance, the 330102‑00‑24‑50‑02‑00 requires operation within +18 to +27 °C, a –24 VDC power supply, a 10 kΩ load, and an AISI 4140 steel target gapped at 1.27 mm (50 mils). These parameters ensure consistent output and reliable calibration across industrial applications. Technical Specifications Parameter Specification Model / Part Number 330102‑00‑24‑50‑02‑00 Probe Type 8 mm Proximity Probe System Compatibility 3300 Proximity Transducer System Target Material Requirement AISI 4140 steel Recommended Gap 1.27 mm (50 mils) Operating Temperature +18 to +27 °C Power Supply –24 VDC Load Requirement 10 kΩ Measurement Capability Static position + dynamic vibration Applications Vibration, position, Keyphasor reference, speed measurement Weight 0.06 kg Dimensions 1.8 × 1.6 × 123 cm Origin USA Condition Brand New Availability In Stock HS Code 8537101190 System TSI compatible Performance Notes The probe’s accuracy specifications apply only when used with a complete 3300 XL 8 mm system. Using alternative target materials may alter calibration characteristics and require custom adjustments. When installed correctly, the probe provides stable, repeatable measurements essential for predictive maintenance and early fault detection. Application Areas Steam and gas turbines Fluid‑film bearing machines Compressors and expanders Gearboxes and industrial motors Keyphasor and speed reference points Machinery requiring precise clearance and vibration monitoring FAQ Q: What target material is required for accurate calibration AISI 4140 steel is required to maintain factory‑specified accuracy. Q: Can this probe measure both vibration and shaft position Yes. It provides both static displacement and dynamic vibration signals. Q: Does this model require a specific operating temperature Yes. It is calibrated for +18 to +27 °C for optimal accuracy. Q: Is this probe compatible with all 3300 XL components Yes. Full accuracy is guaranteed only when used with matching 3300 XL 8 mm components.
$200.00 $100.00
-
Bently Nevada Bently Nevada 330101‑00‑59‑15‑12‑05 | 3300 XL Series 8 mm Proximity Probe
Overview The Bently Nevada 330101‑00‑59‑15‑12‑05 proximity probe is an 8 mm eddy‑current sensor designed for high‑accuracy shaft vibration and displacement measurement in rotating machinery. As part of the 3300 XL transducer family, it provides stable linearity, long‑term reliability, and full compatibility with both XL and non‑XL 3300‑series components. Design and Construction This probe features a 3/8‑24 UNF threaded body with a 5.9‑inch overall case length, offering a durable mechanical structure suitable for harsh industrial environments. It includes a 2.0 m FluidLoc cable, engineered to prevent oil migration along the cable jacket—an essential requirement for turbines, compressors, and other oil‑rich installations. A miniature ClickLoc coaxial connector ensures secure, repeatable electrical connections while allowing quick installation and removal without tools. The probe carries CSA, ATEX, and IECEx certifications, supporting deployment in hazardous‑area applications. Technical Specifications Parameter Specification Model / Part Number 330101‑00‑59‑15‑12‑05 Probe Type 3300 XL 8 mm Proximity Probe Thread Size 3/8‑24 UNF Case Length 5.9 in Unthreaded Length 0.0 in Cable Type FluidLoc oil‑resistant Cable Length 2.0 m Connector Miniature coaxial ClickLoc System Compatibility 3300 XL and non‑XL 3300‑series Certifications CSA, ATEX, IECEx Measurement Capability Static position + dynamic vibration Operating Temperature –35 °C to +120 °C (typical probe rating) Storage Temperature –51 °C to +177 °C Weight 0.06 kg Dimensions 1.8 × 1.6 × 123 cm Origin USA Condition Brand New Availability In Stock HS Code 8537101190 System TSI compatible Functional Description The 330101‑00‑59‑15‑12‑05 probe forms the sensing element of the 3300 XL system, generating a voltage proportional to the distance between the probe tip and the monitored conductive surface. When paired with an XL Proximitor Sensor and extension cable, it provides high‑resolution vibration and displacement measurements with excellent immunity to electromagnetic interference. The FluidLoc cable design prevents oil ingress, significantly improving long‑term reliability in turbine and compressor environments. Full interchangeability with other 5 mm and 8 mm 3300‑series components simplifies system upgrades and maintenance. Application Areas Steam and gas turbines Centrifugal and reciprocating compressors Gearboxes and industrial motors Fluid‑film bearing machines Oil‑rich or contamination‑prone environments Machinery requiring precise vibration and position monitoring FAQ Q: Is this probe compatible with non‑XL 3300 components Yes. It is fully compatible with both XL and non‑XL 3300‑series systems. Q: What advantages does the FluidLoc cable provide It prevents oil migration, improving reliability in turbine and compressor applications. Q: Can this probe measure both vibration and shaft position Yes. It provides both static displacement and dynamic vibration signals. Q: What certifications does this model carry It is approved for hazardous areas under CSA, ATEX, and IECEx standards.
$200.00 $100.00
-
Bently Nevada Bently Nevada | 21747-040-00 | 3300 Series Proximitor Extension Cable
Overview The 21747-040-00 Bently Nevada Extension Cable is a 4-meter proximitor probe extension cable designed for integration with the 3300 and 7200 Series Proximity Transducer Systems. Engineered for precision signal transmission, it supports accurate monitoring of shaft displacement and vibration in rotating machinery. Technical Specifications Parameter Value Model Number 21747-040-00 Product Type Extension Cable Manufacturer Bently Nevada Condition Brand New Product Range 3300 Proximity Transducer System Lead Time In Stock Weight 0.06 kg HS Code 8537101190 Dimensions 1.8 × 1.6 × 123 cm Minimum Order Quantity 1 Origin USA System Compatibility TSI, 3300, 7200, 9000 Series Status Active Cable Length 4 meters Armor Non-armored design Frequency Response 0 Hz (DC) to 10 kHz Compliance API 670 Standard Key Features 4-meter extension cable for proximitor probe systems. Maintains high signal integrity across static and dynamic measurements. Non-armored design for flexible installation. Complies with API 670 standards for mechanical and electrical performance. Compatible with turbines, compressors, pumps, motors, and generators. Manufactured in the USA for reliability and consistency. Applications Shaft position and vibration monitoring in turbomachinery. Integration with proximitor and probe assemblies for extended installation. Predictive maintenance and machinery protection in energy, petrochemical, and heavy industry sectors. Suitable for use with Bently Nevada 3300 and 9000 monitoring systems. FAQ Q: What is the length of the cable? A: The 21747-040-00 extension cable is 4 meters long. Q: Is the cable armored? A: No, it is a non-armored design, offering flexibility in installation. Q: Which systems are compatible with this cable? A: It is compatible with Bently Nevada 3300, 7200, and 9000 series systems.
$200.00 $100.00
-
Bently Nevada Bently Nevada | 330102-27-46-10-02-05 | 3300 XL 8 mm Proximity Probe
Overview The 330102-27-46-10-02-05 Bently Nevada 3300 XL 8 mm Proximity Probe is a precision-engineered sensor designed for vibration and shaft position monitoring in rotating machinery. Built with patented mechanical enhancements, it ensures accurate measurements and long-term reliability in demanding industrial environments. Technical Specifications Parameter Value Model Number 330102-27-46-10-02-05 Product Type Proximity Probe Manufacturer Bently Nevada Condition Brand New Product Range 3300 Proximity Transducer System Lead Time In Stock Weight 0.06 kg HS Code 8537101190 Dimensions 1.8 × 1.6 × 123 cm Minimum Order Quantity 1 Origin USA System Compatibility TSI Status Active Probe Tip Diameter 8 mm Cable Length 1 meter Calibration Standard AISI 4140 steel (default) Compliance API 670 (4th Edition) Key Features Generates voltage output proportional to probe-to-target gap for precise displacement and vibration monitoring. Patented TipLoc molding ensures secure bonding between probe tip and body. CableLoc technology provides 330 N tensile strength for enhanced durability. Optional FluidLoc cable prevents fluid ingress in oil-rich environments. Fully interchangeable with other 3300 XL 8 mm components and backward compatible with non-XL 3300 series probes. Designed for both static position and dynamic vibration measurement. Meets API 670 standards for mechanical configuration, linearity, accuracy, and thermal stability. Applications Fluid-film bearing machinery monitoring. Keyphasor reference systems. Turbomachinery vibration and shaft displacement measurement. Predictive maintenance and machinery protection in power generation, petrochemical, and heavy industry. FAQ Q: Is this probe compatible with older 3300 series systems? A: Yes, it maintains backward compatibility with non-XL 3300 series 5 mm and 8 mm probes. Q: Can the probe be used in oil or fluid environments? A: Yes, with the optional FluidLoc cable, it prevents fluid ingress and ensures reliable operation. Q: What is the default calibration material? A: The probe is factory-calibrated to AISI 4140 steel, with other materials available upon request.
$200.00 $100.00
-
Bently Nevada Bently Nevada 330130‑040‑03‑CN | 3300 XL Series | 4 m Armored Extension Cable
Overview The Bently Nevada 330130‑040‑03‑CN extension cable is a 4‑meter armored cable designed for the 3300 XL Proximity Transducer System. Built for precision vibration monitoring, it ensures secure signal transmission between proximity probes and Proximitor sensors. Its rugged construction and advanced connector technology make it a dependable choice for demanding industrial environments. Technical Specifications Parameter Specification Model 330130‑040‑03‑CN Product Type Armored Extension Cable Brand Bently Nevada Cable Length 4.0 m (11.5 ft) Weight 0.08 kg Dimensions 112 × 1.5 × 1.2 cm Connector Type ClickLoc connectors with protector Pull Strength 330 N (75 lbf) via CableLoc design Bonding Method TipLoc molding for probe tip durability Compliance API 670 mechanical and electrical standards Certifications CSA, ATEX, IECEx System Compatibility 3300 XL Proximity Transducer System, TSI Condition New Origin USA (manufactured by Bently Nevada) MOQ 1 Availability In Stock HS Code 8537101190 Functional Description The 330130‑040‑03‑CN cable provides a secure, interference‑resistant connection that maintains the calibrated performance of the 3300 XL system. Its armored design protects against mechanical stress, vibration, and environmental exposure, ensuring reliable signal integrity. The patented CableLoc and TipLoc technologies enhance durability by reinforcing the probe‑to‑cable bond and preventing connector loosening under vibration. Fully interchangeable with other 3300 XL system components, the cable eliminates the need for recalibration during installation or replacement, simplifying maintenance and reducing downtime. This extension cable is particularly suited for fluid‑film bearing machines, Keyphasor applications, and speed measurement systems. Its robust design supports continuous operation in industries such as power generation, oil & gas, and heavy manufacturing. Application Scenarios Turbine and compressor vibration monitoring Pump and motor displacement measurement Gearbox diagnostics and condition monitoring Keyphasor and speed measurement systems API 670‑compliant machinery protection setups FAQ Q: What is the length of this cable? A: The 330130‑040‑03‑CN is a 4‑meter armored extension cable. Q: Does the cable require calibration when replaced? A: No. It is fully interchangeable with other 3300 XL components without recalibration. Q: What connector type is used? A: ClickLoc connectors with protector, designed for secure, tool‑free installation. Q: Is the cable suitable for hazardous environments? A: Yes. It carries CSA, ATEX, and IECEx certifications for global compliance.
$200.00 $100.00
-
Bently Nevada Bently Nevada 330130‑045‑12‑05 | 3300 XL Series | Armored Extension Cable
Overview The Bently Nevada 330130‑045‑12‑05 extension cable is a 5‑meter armored cable designed for the 3300 XL 8 mm Proximity Transducer System. Built for durability and precision, it ensures secure signal transmission between proximity probes and Proximitor sensors in harsh industrial environments. Its rugged construction and compliance with API 670 standards make it a reliable choice for machinery protection and predictive maintenance programs. Technical Specifications Parameter Specification Model 330130‑045‑12‑05 Product Type Armored Extension Cable Brand Bently Nevada Cable Length 5 m Weight 1.48 kg Dimensions 28 × 26 × 6 cm Connector Type ClickLoc connectors, armored Operating Principle Voltage‑to‑distance proportional signal transmission Compliance API 670 mechanical and electrical standards Certifications CSA, ATEX, IECEx System Compatibility 3300 XL Proximity Transducer System, TSI Condition New Origin USA MOQ 1 Availability In Stock HS Code 8537101190 Functional Description The 330130‑045‑12‑05 cable provides a secure and interference‑resistant connection between probes and Proximitor sensors. Its armored design protects against mechanical damage, vibration, moisture, and chemical exposure, while maintaining accurate displacement and vibration measurements. The cable’s construction ensures immunity to electromagnetic interference, preserving measurement accuracy in electrically noisy environments. Fully interchangeable with other 3300 XL system components, it eliminates the need for calibration or matching during installation or replacement, simplifying maintenance and reducing downtime. This extension cable is particularly suited for fluid‑film bearing machines, Keyphasor applications, and speed measurement systems. Its robust design supports continuous operation in industries such as power generation, oil & gas, and heavy manufacturing. Application Scenarios Turbine and compressor vibration monitoring Pump and motor displacement measurement Gearbox diagnostics and condition monitoring Keyphasor and speed measurement systems API 670‑compliant machinery protection setups FAQ Q: What is the length of the cable? A: The 330130‑045‑12‑05 is a 5‑meter armored extension cable. Q: Does the cable require calibration when replaced? A: No. It is fully interchangeable with other 3300 XL components without recalibration. Q: Is the cable suitable for hazardous environments? A: Yes. It carries CSA, ATEX, and IECEx certifications for global compliance. Q: What applications typically use this cable? A: It is widely used in turbines, compressors, pumps, and other critical rotating machinery requiring reliable vibration monitoring.
$200.00 $100.00
-
Bently Nevada Bently Nevada 330104-01-08-50-01-05 | 3300 XL Series | 8 mm Armored Proximity Probe
Overview The Bently Nevada 330104-01-08-50-01-05 is an 8 mm armored proximity probe designed for precise shaft displacement and vibration measurement in rotating machinery. As part of the 3300 XL Proximity Transducer System, it provides stable, high‑accuracy performance and is engineered for long‑term reliability in harsh industrial environments. Technical Specifications Parameter Specification Model 330104-01-08-50-01-05 Probe Type 3300 XL 8 mm Armored Proximity Probe Thread Size M10 × 1 Probe Tip Material Molded PPS with enhanced coil encapsulation Cable Length 8 m armored cable Connector Type Miniature coaxial ClickLoc System Compatibility 3300 XL Proximity Transducer System Interchangeability Fully compatible with non‑XL 3300 5 mm & 8 mm components Certifications CSA, ATEX, IECEx Weight 0.06 kg Shipping Dimensions 113 × 2 × 1.7 cm HS Code 8537101190 Origin USA Condition New MOQ 1 Lead Time In stock Status Active Functional Characteristics The 330104-01-08-50-01-05 probe features a rugged armored cable and reinforced PPS‑molded probe tip, providing excellent resistance to mechanical stress, abrasion, and environmental exposure. The thicker coil encapsulation enhances durability while maintaining the linearity and accuracy required for critical vibration and position monitoring. The integrated ClickLoc connector ensures secure, vibration‑resistant electrical connections, reducing the risk of signal loss in high‑vibration environments. As with all 3300 XL 8 mm components, the probe requires no matched calibration and can be interchanged freely with compatible extension cables and Proximitor sensors. Its hazardous‑area certifications make it suitable for deployment in oil and gas, petrochemical, power generation, and other regulated industrial sectors. Application Scenarios Ideal for monitoring: Turbines and compressors High‑speed pumps and motors Gearboxes and rotating equipment with fluid‑film bearings API 670–aligned protection systems Machinery requiring armored probe construction FAQ Q: What benefits does the armored cable provide? A: It protects the probe cable from mechanical damage and abrasion, extending service life in harsh environments. Q: Is this probe compatible with older 3300 series components? A: Yes. It is fully interchangeable with non‑XL 3300 5 mm and 8 mm probes and cables. Q: Does the probe require matched calibration? A: No. The 3300 XL system is designed for component interchangeability without bench calibration.
$200.00 $100.00
-
Bently Nevada Bently Nevada 330101-00-45-20-12-05 | 3300 XL Series | 8 mm Proximity Probe
Overview The Bently Nevada 330101-00-45-20-12-05 proximity probe is an 8 mm eddy‑current sensor engineered for precise shaft displacement and vibration monitoring in critical rotating machinery. As part of the 3300 XL Proximity Transducer System, it delivers stable, API 670‑compliant performance and long‑term reliability in harsh industrial environments. Technical Specifications Parameter Specification Model 330101-00-45-20-12-05 Probe Type 3300 XL 8 mm Proximity Probe Thread Size 3/8‑24 UNF Wrench Flats 5/16 in Case Length 2.0 m Cable Type 75 Ω coaxial cable Connector Gold‑plated miniature ClickLoc Mechanical Enhancements TipLoc molded tip, CableLoc high‑strength retention Optional Feature FluidLoc leak‑prevention cable Certifications CSA, ATEX, IECEx System Compatibility 3300 XL Proximity Transducer System Weight 0.06 kg Dimensions 1.8 × 1.6 × 123 cm HS Code 8537101190 Origin USA Condition New MOQ 1 Lead Time In stock Status Active Functional Characteristics The 330101-00-45-20-12-05 probe incorporates Bently Nevada’s patented TipLoc process, which reinforces the bond between the probe tip and body to prevent separation under thermal or mechanical stress. CableLoc technology provides 330 N (75 lbf) of pull strength, ensuring secure cable retention in high‑vibration environments. Gold‑plated ClickLoc connectors maintain low‑resistance electrical contact, supporting clean signal transmission across the probe, extension cable, and Proximitor sensor. The optional FluidLoc cable prevents oil migration through the cable assembly, making the probe suitable for lubrication‑rich environments. Designed to meet API 670 requirements, the probe offers excellent linearity, temperature stability, and mechanical robustness, making it suitable for long‑term machinery protection and predictive maintenance programs. Application Scenarios Common applications include: Turbines and compressors High‑speed pumps and motors Gearboxes and industrial drive systems API 670–aligned monitoring systems Hazardous‑area machinery requiring certified components FAQ Q: What advantages does the TipLoc design provide? A: It strengthens the probe tip bond, improving durability under vibration and thermal cycling. Q: Is this probe compatible with older 3300 series components? A: Yes. It integrates seamlessly with 3300 XL extension cables and Proximitor sensors. Q: Can this model be used in hazardous environments? A: Yes. It carries CSA, ATEX, and IECEx certifications for global hazardous‑location compliance.
$200.00 $100.00
-
Bently Nevada Bently Nevada 330130-070-03-00 | 3300 XL Series | Armored Extension Cable
Overview The Bently Nevada 330130-070-03-00 extension cable is a 7‑meter armored cable engineered for use within the 3300 Proximity Transducer System. Designed to maintain signal integrity over long cable runs, it provides a durable and stable connection between proximity probes and Proximitor sensors in industrial vibration‑monitoring applications. Technical Specifications Parameter Specification Model 330130-070-03-00 Cable Type Armored extension cable Length 7.0 m Cable Technology CableLoc reinforcement (330 N pull strength) Temperature Rating Up to 177°C (350°F) ETR Compatibility Compatible with ETR probes (up to 218°C / 425°F, accuracy limited to ETR specs) Connector Type ClickLoc connectors with protector System Compatibility 3300 Proximity Transducer System Weight 0.06 kg Dimensions 1.8 × 1.6 × 123 cm HS Code 8537101190 Origin USA Condition New MOQ 1 Lead Time In stock System TSI Status Active Functional Characteristics The 330130-070-03-00 cable incorporates Bently Nevada’s CableLoc design, providing exceptional mechanical strength at the probe‑to‑cable interface. Its armored construction protects against abrasion, crushing, and harsh environmental exposure, ensuring long‑term reliability in demanding industrial settings. The cable supports both standard and Extended Temperature Range (ETR) probes, offering flexibility for installations requiring elevated temperature tolerance. When paired with ETR probes, the system operates within ETR accuracy limits, making it suitable for high‑temperature machinery zones. Connector protectors and gold‑plated interfaces maintain low‑noise signal transmission, ensuring accurate vibration and displacement measurements across the entire transducer chain. Application Scenarios This extension cable is commonly used in: Turbines and compressors High‑temperature pump systems Gearboxes and industrial drive trains Machinery requiring long cable routing API 670–aligned monitoring systems FAQ Q: Can this cable be used with all 3300 XL probes? A: Yes. It is compatible with standard 8 mm probes and ETR variants, though accuracy follows the probe’s temperature rating. Q: Does the armored design affect flexibility? A: The cable remains flexible enough for routing while providing enhanced mechanical protection. Q: Is this cable suitable for hazardous environments? A: Yes. It is designed for industrial environments and supports systems deployed in regulated areas when paired with approved probes and sensors.
$200.00 $100.00
-
Bently Nevada Bently Nevada | 330101-00-43-15-12-05 | 3300 XL 8 mm Proximity Probe
Overview The 330101-00-43-15-12-05 Proximity Probe from Bently Nevada is part of the 3300 XL Proximity Transducer System, designed for precise vibration and position monitoring in rotating machinery. Built for durability and accuracy, this probe ensures compliance with international standards and provides reliable measurements in hazardous and demanding industrial environments. Technical Specifications Parameter Value Model Number 330101-00-43-15-12-05 Product Type 8 mm Proximity Probe Manufacturer Bently Nevada Condition Brand New Product Series 3300 XL Proximity Transducer System Probe Diameter 8 mm Thread Size 3/8-24 UNF Case Length Minimum 4.3 inches Cable Length 1.5 m miniature coaxial with ClickLoc connector Cable Options Standard, FluidLoc (oil-resistant) Cable Strength 330 N (75 lbf) with CableLoc design Connector Type Gold-plated, corrosion-resistant ClickLoc Approvals CSA, ATEX, IECEx Weight 0.06 kg Dimensions 1.8 × 1.6 × 123 cm HS Code 8537101190 Minimum Order Quantity 1 Origin USA System Compatibility TSI Status Active (not discontinued) Key Features 8 mm probe diameter for accurate displacement and vibration monitoring. Stronger probe tip-to-body bond using TipLoc molding technology. CableLoc design provides high mechanical pull strength for secure cable retention. FluidLoc option prevents oil and contaminants from entering through the cable interior. Gold-plated ClickLoc connectors ensure reliable electrical performance and corrosion resistance. Certified for hazardous environments with CSA, ATEX, and IECEx approvals. Application Scenarios Continuous monitoring of turbines, compressors, and pumps. Hazardous industrial environments requiring certified equipment. Long-term predictive maintenance programs in petrochemical, power generation, and heavy manufacturing industries. FAQ Q: What certifications does this probe carry? A: The 330101-00-43-15-12-05 probe is CSA, ATEX, and IECEx approved, making it suitable for hazardous environments. Q: How does the FluidLoc option improve reliability? A: FluidLoc prevents oil and contaminants from traveling through the cable, ensuring long-term electrical integrity. Q: What is the difference between this probe and the 330909-00-60-10-01-CN model? A: The 330101-00-43-15-12-05 is a standard 8 mm probe with a 1.5 m cable, while the 330909-00-60-10-01-CN is designed for the Chinese market with armored construction and a 1.0 m cable.
$200.00 $100.00
You have seen 24 out of 500 products