PLC systems and modules deliver flexible automation for industries worldwide. Our inventory includes controllers, input/output modules, and communication units from Allen-Bradley, Siemens, GE, and other leading brands.
PLC Systems & Modules
-
EMERSON Emerson KJ3101X1-BB1 12P2091X122 8-Channel Analog Input Card
Product Description OverviewThe KJ3101X1-BB1 (part number 12P2091X122) is a Series 2 Redundant 8-Channel Analog Input (AI) module for the Emerson DeltaV™ Distributed Control System. It converts 4–20 mA analog signals from field transmitters into high-resolution digital data for process monitoring. This version supports HART protocol pass-through, allowing advanced diagnostic and secondary variable access from smart instruments. Key Features Advanced HART Integration Each channel includes an integrated HART modem, enabling communication with smart field devices without external multiplexing. Seamless connection with AMS Device Manager allows remote configuration, calibration, and asset management. High-Availability Redundant Design Redundant pairing ensures continuous operation. If the active card fails internal self-tests, the standby card automatically assumes control without signal interruption. Redundant backplane paths provide two independent communication routes to the controller, enhancing reliability for critical process measurements. Precision and Signal Protection High-resolution 16-bit analog-to-digital converters deliver precise readings, even for subtle changes in temperature, pressure, or flow. Electrical isolation protects the system backplane from field-side surges or noise. Configurable software filtering smooths out transient or noisy signals for consistent process monitoring. Rugged, Serviceable Construction Hot-swappable design allows replacement under power, minimizing downtime. Front-panel LED indicators provide real-time status feedback for run state, errors, and redundancy condition. Technical Specifications Feature Specification Model KJ3101X1-BB1 / 12P2091X122 Channel Count 8 Analog Input Channels Signal Type 4–20 mA DC Protocol Support Analog (4–20 mA) + HART Digital Resolution 16-bit Input Power Supplied via DeltaV backplane Operating Temperature -40°C to +70°C Environmental Rating ISA-S71.04 Class G3 (Conformal Coating) Redundancy Supports redundant pair operation Hot-Swappable Yes LED Indicators Run, Error, Active/Redundancy Operational Overview The KJ3101X1-BB1 is ideal for high-reliability analog monitoring in DeltaV systems. Its redundancy and HART pass-through capabilities support predictive maintenance, allowing operators to detect sensor issues before they trigger process trips. Maintenance Tips Ensure cards are installed on a Redundant 8-Channel Terminal Block to leverage full redundancy. Use DeltaV Diagnostics Explorer to verify the source of an "Error" LED indication, distinguishing between internal card faults or field wiring issues. ApplicationsSuitable for monitoring temperature, pressure, flow, and other analog variables in process industries requiring high availability and diagnostic visibility. FAQQ: Can this module communicate with multiple HART devices on the same loop?A: Yes, each channel independently supports HART pass-through for smart instrument diagnostics. Q: Is the KJ3101X1-BB1 compatible with standard DeltaV controllers?A: Yes, it integrates seamlessly into DeltaV Series 2 systems and supports redundant operation. Similar Models ComparisonCompared to non-redundant KJ3101X1 modules, the BB1 version provides full redundancy, HART diagnostics, and hot-swappable capabilities for critical process applications.
$200.00 $100.00
-
EMERSON Emerson KL2101X1-BA1 DeltaV S-Series CHARM I/O Card Carrier
Product Description OverviewThe KL2101X1-BA1 is a rugged 12-slot CHARM I/O card carrier for the Emerson DeltaV™ S-series Distributed Control System. It provides a high-density, modular platform for field wiring directly to CHARM modules, supporting a broad range of signal types including analog, discrete, and RTD. This carrier eliminates traditional marshalling cabinets, simplifying wiring while enhancing system flexibility and reliability. Key FeaturesModular Architecture Supports up to 12 CHARM modules per carrier with isolated electrical slots to maintain channel integrity. Multiple carriers can be mounted on DIN rails to scale I/O capacity without system disruption. Electronic Marshalling Simplified Field devices connect directly to the carrier’s terminals, reducing wiring complexity and installation costs. Hot-swappable CHARM slots allow modules to be added or removed without shutting down the system. Industrial Reliability Conformal-coated design meets ISA-S71.04 Class G3 standards for resistance to corrosive environments. Operational temperature range from -40°C to +70°C suitable for remote instrument enclosures. Built-in grounding bars ensure signal integrity for sensitive analog measurements. Power and Communication Distributes redundant 24 VDC power to individual CHARM modules. Supports field-powered devices such as 4–20 mA transmitters with stable power delivery. Direct connection to CHARM I/O Processor (CIOP) for communication and diagnostics. Hazardous Area Compliance ATEX/IECEx Zone 2, Class I Div. 2, and additional certifications including FM, UKEX, and CL.1. Technical Specifications Feature Specification Model KL2101X1-BA1 Capacity 12 CHARM Slots Series DeltaV S-series Mounting DIN Rail (Horizontal or Vertical) Operating Temperature -40°C to +70°C Shock 10g half-sine, 11 ms Vibration 1mm p-p 2–13.2Hz, 0.7g 13.2–150Hz Environmental Rating ISA-S71.04 Class G3 Humidity 5–95% non-condensing Input Power 24 VDC, 2 A Output Power 6.3 VDC, 3.25 A Hazardous Area ATEX/IECEx Zone 2, Class I Div. 2 ApplicationsIdeal for compact instrument enclosures, remote I/O deployments, and systems requiring high-density, flexible I/O in harsh industrial environments. Maintenance NotesEnsure DIN rail is properly grounded during installation to maintain accurate CHARM diagnostics. The carrier supports live insertion and removal of modules without disrupting adjacent channels. FAQQ: Can I mix analog and discrete CHARM modules on the same carrier?A: Yes, each slot is electrically isolated, allowing mixed signal types without interference. Q: Is the carrier suitable for outdoor installations?A: Yes, the KL2101X1-BA1 operates reliably from -40°C to +70°C and is conformal-coated for G3 environmental conditions. Similar Models ComparisonThe KL2101X1-BA1 differs from the KL2101X2-BA1 8-slot carrier by offering higher module density and expanded field wiring flexibility.
$200.00 $100.00
-
EMERSON Emerson KJ4006X1-BG1 | DeltaV S-Series 16-Channel Analog Input Block
Product Description Overview The KJ4006X1-BG1 is a 16-channel analog input terminal block engineered for the DeltaV™ S-Series Distributed Control System. It provides a robust interface between field-level analog sensors and S-Series I/O modules, supporting both electronic marshalling and standard I/O configurations. Built to meet stringent environmental and hazardous area standards, this terminal block ensures secure and reliable signal acquisition in modern industrial facilities. Key Features High-Density Analog Connectivity Supports 16 analog input channels in a single footprint for efficient cabinet space utilization Compatible with 2-wire, 3-wire, and 4-wire transmitters Ideal for 4–20 mA signals from pressure, flow, and temperature sensors Hazardous Area Certification ATEX, IECEx, and FM approved for Zone 2/Class I, Div 2 applications Designed to minimize risk of sparks or shorts in environments with flammable gases or vapors Rugged Environmental Design Withstands ISA-S71.04 Class G3 airborne contaminants for corrosion resistance Operational temperature range of -40°C to +70°C Shock rated at 10g half-sine wave, vibration compliant with 1mm peak-to-peak (2–13.2 Hz) and 0.7g (13.2–150 Hz) Safety and Integrity Rotary keying ensures correct pairing with compatible I/O cards Field power rated at 30 VDC and 100 mA per channel for reliable sensor operation Shielded wiring connections minimize electromagnetic interference (EMI) for accurate analog readings Technical Specifications Feature Specification Model Number KJ4006X1-BG1 Series DeltaV S-Series Analog Channels 16 Field Power 30 VDC @ 100 mA per channel Operating Temperature -40°C to +70°C Relative Humidity 5–95% Non-Condensing Hazardous Area Certification ATEX II 3G Ex ec IIC Gc, IECEx FMG 19.0019U, FM, Zone 2/Div 2 Shock Rating 10g, 11 ms half-sine Vibration Rating 1mm peak-to-peak (2–13.2 Hz), 0.7g (13.2–150 Hz) Airborne Contaminant Protection ISA-S71.04 Class G3 Mounting DeltaV S-Series I/O Carrier Applications The KJ4006X1-BG1 is suited for analog signal acquisition in: Chemical and oil & gas plants Marine and offshore facilities Hazardous and harsh industrial environments FAQ Q: Can this terminal block be used with 4-wire transmitters?A: Yes, it supports 2-wire, 3-wire, and 4-wire analog transmitters. Q: What is the field power rating per channel?A: Each channel is rated for 30 VDC at 100 mA. Q: How does rotary keying enhance safety?A: Rotary keying ensures only compatible S-Series I/O cards can be connected, preventing wiring errors and signal damage. Q: Is the block resistant to corrosion?A: Yes, it meets ISA-S71.04 Class G3 standards for airborne contaminant protection.
$200.00 $100.00
-
EMERSON Emerson KJ3243X1-BB1 | 12P3430X022 32-Channel 24 VDC Output Card
Product Description Overview The KJ3243X1-BB1 (12P3430X022) is a high-density, 32-channel discrete output module for the DeltaV™ Series 2 Distributed Control System. Designed to drive 24 VDC field devices such as solenoid valves, relays, and indicators, this module enables efficient space utilization and high system reliability. The redundant design ensures seamless switchover to a standby card in the event of a hardware failure, preventing process interruptions. Key Features High-Density Output Control Provides 32 discrete output channels in a single module, reducing I/O cabinet footprint Manages 24 VDC high-side switching with low internal heat generation Supports large-scale valve manifolds and multiple field devices from one slot Redundancy and High Availability Operates in hot-standby mode when paired with a second card Automatic failover transfers output control to the redundant card within one scan cycle Maintains output state during hardware failures to prevent unintended shutdowns Smart Diagnostics and Safety Monitors for open or short circuits on each channel Readback verification confirms the commanded On/Off state matches the actual output voltage Protects DCS backplane via galvanic isolation between field outputs and controller logic Rugged Industrial Design Hot-swappable for zero downtime maintenance Operates in harsh industrial conditions with an ambient range of -40°C to +70°C Engineered for reliability in continuous process environments Technical Specifications Feature Specification Model Number KJ3243X1-BB1 / 12P3430X022 Number of Channels 32 High-Density Channels Output Type 24 VDC High-Side Switching Maximum Current 100–500 mA per channel (depending on load) Series DeltaV Series 2 Redundancy Support Yes, dual-card configuration Operating Temperature -40°C to +70°C Isolation Galvanic isolation for field-to-logic protection Mounting Series 2 terminal block Diagnostics Open/short circuit detection, readback verification Compliance Meets UL, CE, and international industrial safety standards Applications The KJ3243X1-BB1 is ideal for: Batch process control systems Automated valve manifolds Safety shutdown systems requiring high channel countIts high-density design allows engineers to manage multiple outputs efficiently within limited cabinet space. FAQ Q: Can this module be replaced while the system is powered?A: Yes, it is hot-swappable, but redundancy requires correct seating on a compatible redundant terminal block. Q: How is output state verified?A: The module reads back the actual voltage at each terminal to confirm the On/Off state. Q: What is the maximum current per channel?A: Typically 100–500 mA, depending on total load and simultaneous device activation. Q: Does the card support redundancy?A: Yes, dual-card configuration enables seamless automatic switchover during a failure.
$200.00 $100.00
-
EMERSON Emerson KJ3203X1-BA1 | 12P3162X132 Discrete Input Card
Product Description Overview The KJ3203X1-BA1 (12P3162X132) is a Series 2 discrete input module designed for the DeltaV™ Distributed Control System. It interfaces directly with 120/230 VAC field signals, converting them into high-integrity digital inputs for the controller. This module eliminates the need for interposing relays and reduces overall cabinet complexity while maintaining redundancy and reliability in critical control applications. Key Features High-Voltage Direct Input Supports 120 VAC and 230 VAC nominal field signals Direct connection to motor starters, limit switches, and pushbuttons Eliminates external signal conditioning devices Redundancy and Reliability 1-to-1 card redundancy with instant failover Isolates field-side electrical noise and surges from sensitive backplane circuitry Hot-swappable for uninterrupted operation Advanced Signal Processing Configurable debounce filters to prevent false triggering High-speed scanning captures rapid state changes accurately Local LED diagnostics for each channel and overall card status Industrial Durability Operates in -40°C to 70°C ambient temperatures 1500 V peak isolation between field inputs and logic Rugged design suitable for harsh industrial environments Technical Specifications Feature Specification Model Number KJ3203X1-BA1 / 12P3162X132 Input Type Discrete AC (On/Off) Number of Channels 8 isolated channels Nominal Input Voltage 120/230 VAC Isolation Voltage 1500 V Peak (Field-to-Logic) Input Filtering Programmable debounce, high-speed state capture Redundancy 1-to-1 with terminal block Operating Temperature -40°C to 70°C Mounting Series 2 DeltaV rack Diagnostics Local LED indicators (Run/Error + channel state) Compliance UL, CE, and industrial safety standards Applications The KJ3203X1-BA1 is ideal for monitoring critical discrete signals such as: Motor running and stopped status Valve open/closed feedback Pushbutton and limit switch statusIt is suited for control and safety systems in chemical, oil & gas, and manufacturing facilities. FAQ Q: Can the module be replaced while the system is running?A: Yes, it is hot-swappable without interrupting adjacent cards or process operation. Q: What is the isolation rating for field signals?A: The module provides 1500 V peak isolation between field inputs and logic circuits. Q: Does it support both 120 VAC and 230 VAC inputs?A: Yes, it is designed for global voltage standards with direct field interfacing. Q: How does redundancy work?A: Two cards installed in a redundant terminal block operate in parallel; if the active card fails, the standby card takes over immediately.
$200.00 $100.00
-
EMERSON Emerson KL4201X1-BA1 DeltaV CHARM I/O Processor Series 2
Product Description Overview The KL4201X1-BA1 from Emerson is a Series 2 CHARM I/O Processor for the DeltaV™ Distributed Control System. Serving as the intelligent hub for CHARM columns, this module replaces traditional marshalling cabinets by directly interfacing field devices with the DeltaV controller. It handles signal characterization for analog, digital, and temperature signals with high flexibility and precision. Key Features Electronic Marshalling Intelligence Supports any CHARM type (AI, AO, DI, DO, RTD, Thermocouple) on any terminal, auto-detecting channel configuration Allows last-minute changes without cabinet rewiring; only the specific CHARM module needs replacement High-Density, Scalable Design Manages up to 96 individual CHARMs per redundant processor pair, minimizing physical footprint Modular expansion allows incremental growth of I/O channels as process demands increase Redundant and Reliable Operation Designed for paired deployment to ensure uninterrupted control if the primary processor fails Dual Ethernet ports provide continuous communication via the redundant I/O bus Advanced Diagnostics Continuous monitoring of each CHARM channel for faults such as open circuits or shorts Self-checks and real-time A/D verification maintain process accuracy Technical Specifications Feature Specification Model Number KL4201X1-BA1 Module Type CHARM I/O Processor System Compatibility DeltaV Series 2 / S-series / M-series Channel Capacity Up to 96 CHARMs per processor pair Communication Redundant Ethernet I/O Bus Operating Temperature -40°C to 70°C Hazardous Area Rating Often suitable for Class 1, Div 2 / Zone 2 Hot-Swap Capability Yes, supports redundant pair replacement without downtime Signal Types Supported AI, AO, DI, DO, RTD, Thermocouple Operational Notes The KL4201X1-BA1 allows single-channel integrity, ensuring a fault in one wire or CHARM does not affect other channels. Hot-swappable design permits maintenance while maintaining redundant operation. Applications Ideal for DeltaV installations in chemical, oil & gas, and other process industries where flexibility, high-density I/O, and continuous uptime are critical. Perfect for systems using Electronic Marshalling to simplify cabinet layouts and reduce installation costs. FAQ Q: Can I expand I/O channels without replacing the processor?A: Yes, the KL4201X1-BA1 supports modular addition of CHARMs one channel at a time. Q: What happens if the primary CHARM processor fails?A: The redundant processor takes over instantly, maintaining all control functions and communication. Q: Are firmware updates required for DeltaV integration?A: Yes, ensure firmware matches the DeltaV workstation version for full compatibility.
$200.00 $100.00
-
EMERSON Emerson KJ3102X1-BA1 12P2093X132 DeltaV Pulse Input Card
Product Description Overview The KJ3102X1-BA1 (12P2093X132) is a high-performance Redundant High-Speed Pulse Input Card for the Emerson DeltaV™ Series 2 Distributed Control System (DCS). It is engineered to capture high-frequency pulse signals with precision, making it ideal for applications such as turbine speed monitoring, flow measurement, and other pulse-based instrumentation. Its redundant design ensures continuous operation in critical process environments. Key Features High-Speed Pulse Processing: Handles inputs up to 50 kHz, providing accurate frequency and totalization measurement. Redundancy and Failover: When paired with an identical module, it provides seamless failover within milliseconds to maintain uninterrupted process control. Hot-Swappable: Can be safely replaced without shutting down the DeltaV system in non-hazardous environments. Versatile Signal Compatibility: Accepts dry contacts, voltage pulses, and specialized transmitters with programmable filtering to prevent false counts. Channel-Level Diagnostics: Monitors each input channel for open circuits, short circuits, and general health, reporting status to the DeltaV controller. Robust Industrial Design: Supports operation from -40°C to 70°C, with storage up to 85°C, and humidity tolerance from 5% to 95% non-condensing. Technical Specifications Feature Specification Model Number KJ3102X1-BA1 / 12P2093X132 Input Channels 4 Isolated Channels Max Pulse Frequency 50 kHz Input Type Pulse, Frequency, Totalization Input Voltage 24 VDC Input Current 80 mA Output Voltage 24 VDC Output Current 1.2 A Isolation Channel-to-Channel and Channel-to-System Operating Temperature -40°C to 70°C Storage Temperature -40°C to 85°C Humidity 5–95% Non-Condensing Dimensions 12.5 cm × 7.5 cm × 2.5 cm Applications Turbine and Motor Speed Monitoring: Captures high-speed rotational signals with minimal latency. Flow Metering: Provides precise pulse counting for accurate fluid measurement. Redundant Process Control Systems: Maintains data integrity during module or system faults. Installation Notes Refer to the product label for serial number and manufacture date. Follow the DeltaV Zone 2 hazardous area installation guidelines (document 12P2046). Do not remove or insert the card while system power is energized in hazardous zones. Ensure network connections do not exceed 60 VAC or 75 VDC to prevent equipment damage. FAQ Q: Can the KJ3102X1-BA1 be used in hazardous areas?A: Yes, but it must be installed according to Zone 2 guidelines in the DeltaV installation manual. Q: How fast can this module count pulses?A: The module can process pulses up to 50 kHz with high precision. Q: What happens if one card fails in a redundant pair?A: The standby card takes over immediately, ensuring uninterrupted process measurement.
$200.00 $100.00
-
EMERSON Emerson KJ4001X1-BE1 S-Series LocalBus Left-Hand I/O Expansion Module
Product Description Overview The Emerson KJ4001X1-BE1 is a Left-Hand LocalBus expansion module for S-series DeltaV I/O carriers. Designed for system scalability, it enables high-speed communication and power distribution across multiple carrier segments. Installed in the far-left slot of the receiving carrier, it ensures seamless integration with Right-Hand LocalBus ports and expansion cabling. Its rugged design makes it suitable for challenging industrial environments. Key Features Signal Distribution: Receives LocalBus communication signals and propagates them across the I/O carrier, maintaining timing and signal integrity. Power Handling: Bridges 12.6 VDC LocalBus power and supports bussed field power of 30 VDC at 6.5 A. Environmental Resilience: Operates reliably between -40°C and +70°C, resistant to vibration, shock, and airborne contaminants (ISA-571 Class G3). Enhanced Shielding: Minimizes electromagnetic interference to maintain stable digital communication. Easy Installation: Snap-on design with front-access connector allows rapid deployment or replacement. Technical Specifications Feature Specification Module Type LocalBus Left-Hand Expansion Compatible Carriers DeltaV S-Series (Horizontal/Vertical) LocalBus Power 12.6 VDC at 8 A Bussed Field Power 30 VDC at 6.5 A Operating Temperature -40°C to +70°C (-40°F to 158°F) Storage Temperature -40°C to +85°C (-40°F to 185°F) Shock Resistance 10g, 11 ms, Sinewave Vibration Resistance 1 mm p-p (2–13.2 Hz), 0.7 g (13.2–150 Hz) Airborne Contaminants ISA-571 Class G3 Relative Humidity 5–95%, Non-condensing Weight 0.72 kg Certifications ATEX Zone 2 / Class 1 Div 2 Application Scenarios Expanding DeltaV LocalBus networks across multiple I/O carriers. Deployments in corrosive, high-vibration, or wide-temperature industrial environments. Real-time process control requiring uninterrupted high-speed data communication. FAQ Q: Can this module be installed on vertical and horizontal carriers?A: Yes, it is fully compatible with both orientations of S-series I/O carriers. Q: What cable is required to connect the right-hand port?A: The recommended expansion cable is KJ4001X1-CJ1, linking Right-Hand and Left-Hand LocalBus ports. Q: Does it support full LocalBus power distribution?A: Yes, it bridges 12.6 VDC LocalBus power to downstream I/O modules, maintaining system integrity. Q: How does it perform under high EMI environments?A: Enhanced shielding ensures signal integrity and reliable operation in areas with electromagnetic interference. Q: Are there compatible alternatives?A: The KJ3002X1-BE1 is the corresponding Right-Hand port, which pairs with this module for bus expansion.
$200.00 $100.00
-
ABB ABB TAS01 Turbine Auto-Synchronization I/O Module
Product Description The ABB TAS01 is a dedicated turbine generator synchronization module developed for ABB Harmony Rack, Symphony Plus, and Bailey Infi-90 control platforms. It performs precise automatic synchronization between a turbine-driven generator and the power grid by continuously analyzing voltage, frequency, and phase angle conditions. Designed for critical power applications, this module eliminates the need for manual synchronization procedures and significantly reduces the risk of out-of-phase breaker closure. Its fast processing capability ensures rapid response during synchronization events, contributing to improved system safety and operational consistency. The TAS01 is typically deployed in turbine control systems where accurate grid connection and generator protection are essential. Core Functional Capabilities Automatic matching of generator and grid parameters prior to breaker closure Continuous monitoring of phase angle, voltage magnitude, and frequency deviation Output control signals for synchronization and breaker operation High-speed decision logic for real-time synchronization events Integration within ABB distributed control system architectures Technical Specifications General Model: TAS01 Manufacturer: ABB Module Type: Turbine Auto-Synchronization I/O Module Installation: Rack-mounted (Harmony / Symphony / Infi-90 systems) Input and Output Analog Inputs: 8 channels Supports voltage, current, frequency, and phase measurements Digital Outputs: 4 channels Used for synchronization commands and control triggers Synchronization Performance Phase Accuracy: ±0.1° Frequency Accuracy: ±0.01 Hz Response Time: ≤ 10 ms Electrical Characteristics Supply Voltage: 24 V DC (standard configuration) Optional support for 110 / 230 V AC depending on system setup Power Consumption: approximately 5 W Mechanical Data Dimensions (approximate): Length: 297–300 mm Width: 175 mm Height: 35–36 mm Alternative compact format reference: 17.8 × 5.1 × 2.5 cm Weight: 0.75 kg Mounting Method: Standard ABB rack system Environmental Conditions Operating Temperature: –25 °C to +60 °C Storage Temperature: –40 °C to +70 °C Environmental Classification: WEEE Category 5 System Compatibility ABB Harmony Rack systems ABB Symphony Plus DCS Bailey Infi-90 and Infi-90 Open control systems Typical Applications Steam and gas turbine generator synchronization Power plant grid connection control Generator protection and startup sequencing Industrial cogeneration systems FAQ What does the TAS01 module control during synchronization?It evaluates phase angle, voltage, and frequency differences between the generator and grid, then issues a controlled closing command when conditions are within tolerance. Can TAS01 be used in redundant control architectures?Yes, it is compatible with redundant DCS configurations, enhancing system reliability in critical power applications. Is manual synchronization still required?No, the module automates the entire synchronization process, though manual override may be available depending on system design.
$200.00 $100.00
-
EMERSON Emerson KJ4001X1-HB1 DeltaV S-Series 8-Slot Horizontal I/O Carrier
Product Description Overview The KJ4001X1-HB1 is a high-reliability horizontal I/O bus carrier engineered for the DeltaV™ S-series DCS. It provides the structural and electrical backbone for mounting DeltaV I/O modules and terminal blocks, enabling seamless communication and consistent power distribution across the system. Designed for horizontal DIN rail installation, the carrier combines rugged construction with ergonomic design for simplified wiring and long-term durability. Key Features Integrated LocalBus CommunicationThe carrier incorporates a built-in redundant LocalBus that maintains high-speed, reliable communication between the DeltaV controller and each installed module. This ensures low-latency signal transfer and system integrity. Power Distribution and RedundancyThe KJ4001X1-HB1 delivers both 12 VDC logic power and 24 VDC field power to installed I/O modules. It supports redundant power configurations to maintain continuous operation in case of a single power supply failure. Modular ExpandabilityMultiple carriers can be interconnected using LocalBus extension cables, allowing systems to scale from a few dozen to thousands of I/O points within a single cabinet while maintaining robust communication and power distribution. Rugged Design and ReliabilityThe carrier features a mechanical keying system to prevent incorrect module insertion, vibration resistance for industrial environments, and Class G3 conformal coating to resist corrosive airborne contaminants. Technical Specifications Feature Specification Slot Capacity 8 I/O module slots Mounting Type Horizontal DIN rail (T-type) LocalBus Voltage 12 VDC Field Power Voltage 24 VDC Maximum Field Current 8 A per carrier Operating Temperature -40°C to 70°C (-40°F to 158°F) Relative Humidity 5–95% non-condensing Shock Resistance 10 g, 11 ms half-sine wave Vibration Resistance 1 mm peak-to-peak (2–13.2 Hz), 0.7 g (13.2–150 Hz) Airborne Contaminants ISA-S71.04 Class G3 Hazardous Area Rating ATEX Zone 2 / Class 1 Div 2 Expansion Support LocalBus extension for multi-carrier connectivity Grounding Integrated grounding bars for shield wires Installation and Maintenance Modules and terminal blocks snap into place for tool-free installation. While hot-swappable operation is supported, carriers must not be removed or inserted with energized LocalBus or field circuits in hazardous areas. Inter-carrier cabling must not exceed 6.5 meters, and conduit is required between enclosures. No user serviceable parts are present; disassembly is not permitted. Applications DeltaV DCS systems requiring high-density I/O configurations Multi-module cabinet deployments with scalable field connections Hazardous area installations in chemical, oil, and gas facilities Industrial environments with vibration and corrosive contaminant exposure FAQs Q: Can multiple carriers be linked to expand system I/O?A: Yes, using LocalBus expansion cables, several KJ4001X1-HB1 carriers can be interconnected while maintaining reliable communication and power distribution. Q: Is this carrier suitable for hazardous areas?A: Yes, it is certified for ATEX Zone 2 and Class 1 Division 2 environments. Q: Does the carrier require calibration or maintenance?A: No calibration is required, and the unit contains no user-serviceable parts. Q: Can I remove modules while the system is powered?A: Modules can be hot-swapped in non-hazardous areas, but the carrier itself must not be removed while powered in hazardous locations.
$200.00 $100.00
-
ABB ABB INNIS21 Infi-Net Communication Interface Slave Module
Product Description The ABB INNIS21R / INNIS21 is a high-performance communication interface module engineered for use within ABB Bailey Infi-90, Net-90, and Symphony Plus distributed control systems. It operates as a slave interface that connects a local control node to the Infi-Net (Cnet) backbone, enabling deterministic, high-speed data transfer across the control network. This module is designed for mission-critical industrial environments where stable communication, system scalability, and diagnostic transparency are essential. By acting as a bridge between node-level controllers and the network infrastructure, it ensures synchronized operation and efficient data exchange across large automation architectures. Key Functions and Features Node-to-network communication via ABB Infi-Net (Cnet) Supports deterministic data transmission for real-time control systems Integrated diagnostics for communication status and fault detection Redundant communication capability for increased system reliability Scalable architecture suitable for large distributed systems Compatible with legacy and modern ABB Symphony control platforms Technical Specifications General Information Model: INNIS21R / INNIS21 Product ID: INNIS21R Manufacturer: ABB Description: Loop Interface Slave Module Communication Characteristics Network Type: Infi-Net (Cnet) Communication Role: Slave interface to control node Protocol: ABB proprietary high-speed communication protocol Transmission Speeds: 10 Mbaud 2 Mbaud 0.5 Mbaud System Capacity Maximum nodes per system: up to 62,000+ Maximum nodes per network segment: up to 250 Maximum Cnet-to-Cnet interfaces: up to 250 Electrical Requirements Operating Voltage: +5 VDC Current Consumption: Typical: 825 mA Maximum: 1.1 A Power Consumption: approx. 4.1 W to 5.5 W Physical Specifications Dimensions: 17.8 cm × 5.1 cm × 33.0 cm Weight: 0.2 kg Mounting: Standard ABB rack/module slot Compliance and Identification Customs Tariff Code: 8517620090 Applications Power generation control systems (turbines, boilers) Oil & gas production and refining automation Chemical and petrochemical processing plants Pulp & paper manufacturing systems Large-scale distributed control system (DCS) networks FAQ What is the main role of the INNIS21 module?It provides communication between a controller node and the Infi-Net network, enabling real-time data exchange and system coordination. Is the INNIS21R backward compatible with older systems?Yes, it is designed to work with legacy Bailey Infi-90 and Net-90 systems as well as newer Symphony Plus platforms. Does this module support redundant communication?Yes, it can be configured in redundant network architectures to improve system availability and fault tolerance.
$200.00 $100.00
-
EMERSON Emerson KC3010X1-BA1 12P6762X082 DeltaV S-Series Analog Input Module
Product Description Overview The KC3010X1-BA1 from Emerson is a high-density, 16-channel Analog Input Plus module for DeltaV S-series and Series 2 systems. It converts 4-20 mA signals from smart field devices into precise digital data while supporting HART communication for advanced diagnostics and device monitoring. Engineered for industrial environments, it combines high accuracy, hot-swappable convenience, and robust environmental tolerance. Key Features HART Protocol IntegrationThe module enables full HART communication, providing access to secondary process variables, device status, and calibration information. This functionality supports predictive maintenance and proactive asset management without disrupting the main control loop. High-Density, High-Accuracy I/OWith 16 channels in a single module, the card maximizes cabinet utilization. Each channel provides 16-bit resolution and 0.1% span accuracy, ensuring reliable measurement for pressure, flow, and temperature signals. Hot-Swappable DesignThe module can be replaced or upgraded while the I/O node remains energized. This allows maintenance or expansion without system downtime or interruption of other modules. Industrial ReliabilityCertified for harsh environments and hazardous locations, the KC3010X1-BA1 features: G3 Environmental Protection: Conformal coating guards against moisture, dust, and corrosive airborne contaminants. Hazardous Area Compliance: ATEX Zone 2 and Class 1 Division 2 certification for safe operation in explosive atmospheres. Technical Specifications Feature Specification Channels 16 Input Signal 4–20 mA standard, full range 1–22.5 mA LocalBus Power 12 VDC at 150 mA Field Circuit Power 24 VDC at 30 mA per channel, 500 mA bussed max Resolution 16-bit A/D converter Accuracy ±0.1% of span typical Operating Temperature -40°C to +70°C Shock Resistance 10 g, half-sine, 11 ms Vibration Resistance 1 mm peak-to-peak 2–13.2 Hz; 0.7 g 13.2–150 Hz Humidity 5–95% non-condensing Airborne Contaminants ISA-S71.04 Class G3 Hazardous Area Rating ATEX II 3G Ex nA [ic] IIC Gc Mounting DeltaV S-series or Series 2 I/O Carrier Performance Characteristics Digital Signal Filtering: Reduces 50/60 Hz interference and process-induced spikes. Over-Range Detection: Monitors and reports high or low off-scale conditions for safety response. Self-Diagnostics: Continuously verifies internal electronics and wiring integrity, including short/open detection. Installation and Maintenance Field power must be removed prior to insertion or removal. Rotary keying ensures proper module-terminal block alignment. No user-serviceable parts; calibration is not required. Applications Process plants requiring 16-channel analog inputs with HART: chemical, pharmaceutical, oil & gas, and power generation. Monitoring critical smart transmitters for predictive maintenance. Systems needing minimal footprint with high signal density. FAQ Q: Can the module be replaced while the system is live?A: Yes, it supports hot-swappable installation without impacting other modules. Q: What type of HART data is available?A: Both primary process variables and secondary device parameters, including diagnostics and calibration data. Q: Does it require calibration or maintenance?A: No calibration is needed, and there are no user-serviceable parts inside.
$200.00 $100.00
-
EMERSON Emerson KJ4110X1-BB1 DeltaV Wireless I/O Gateway Module
Product Description Overview The KJ4110X1-BB1 from Emerson is a Series 2 Redundant Wireless I/O Gateway for DeltaV™ Distributed Control Systems. It enables seamless integration of WirelessHART® field instruments into the DeltaV network, bridging wireless sensors such as pressure, temperature, and vibration devices directly into process control loops. The module is engineered for high availability, typically deployed in redundant pairs to maintain uninterrupted wireless communication even during hardware failure. Core Features Reliable WirelessHART Connectivity Supports self-organizing WirelessHART mesh networks for >99% data reliability Transparent access to all HART variables, device diagnostics, and alerts High Availability & Redundancy Redundant operation ensures continuous network management if one gateway fails Hot-swappable modules allow replacement without disrupting wireless data flow DeltaV System Integration Auto-recognition reduces commissioning time Secure wireless communication with AES-128 encryption and authentication Rugged Industrial Construction Conformal coating (G3) safeguards against moisture, chemical exposure, and corrosion Operating temperature range from -40°C to 70°C for field or cabinet installation Technical Specifications Feature Specification Model Number KJ4110X1-BB1 Module Type Series 2 Redundant Wireless I/O Gateway Communication Protocol WirelessHART (IEC 62591) Maximum Devices Up to 100 WirelessHART instruments (license-dependent) Data Security AES-128 bit encryption Operating Temperature -40 to 70 °C (-40 to 158 °F) Hazardous Area Certification ATEX / IECEx Class 1, Div 2 / Zone 2 Mounting S-Series 2-Wide or 8-Wide Carrier Redundancy Supported in redundant pair configuration Weight Approx. 0.3 kg Environmental Protection ISA-S71.04 Class G3, IP20 Shock / Vibration 10g half-sine, 11 ms; 1 mm P-P (2–13.2 Hz), 0.7g (13.2–150 Hz) Applications Integration of wireless field instruments in process plants Remote sensor deployment where cabling is cost-prohibitive High-availability control loops requiring uninterrupted wireless data Petrochemical, power generation, and industrial manufacturing environments FAQ Q: How many devices can the KJ4110X1-BB1 support?A: Up to 100 WirelessHART instruments depending on the software license. Q: Can this module operate in hazardous areas?A: Yes, it meets ATEX and IECEx Class 1, Div 2 / Zone 2 certification requirements. Q: Is this gateway hot-swappable?A: Yes, it can be replaced without interrupting the wireless network. Q: What redundancy features does it provide?A: Designed for paired deployment; the secondary unit automatically assumes network management if the primary fails.
$200.00 $100.00
-
EMERSON Emerson KJ3001X1-BE1 DeltaV S-Series 8-Wide I/O Carrier
Product Description Overview The Emerson KJ3001X1-BE1 is an 8-wide horizontal I/O carrier engineered for the DeltaV S-Series Distributed Control System (DCS). It serves as a modular backplane, providing mechanical support, electrical power distribution, and high-speed communication for up to eight traditional S-Series I/O modules. Its snap-in design simplifies installation, maintenance, and system scaling. Key Features Integrated Power and Protection Equipped with primary and secondary 24 VDC power buses for field modules. Individual slot fusing isolates faults, preventing a single module from affecting the entire carrier. High-Speed LocalBus Communication Provides a transparent interface for real-time data transfer between controllers and I/O modules. Enables simultaneous diagnostics and reporting for all eight slots. Rugged Industrial Design Snap-in module assembly eliminates the need for specialized tools. Conformal G3 coating protects against airborne contaminants and harsh industrial conditions. Advanced Reliability and Maintainability Hot-swappable design allows modules to be replaced without powering down the system. Integrated shield grounding minimizes electrical noise interference for sensitive electronics. Flexible System Expansion Multiple carriers can be connected in sequence along a T-type DIN rail to support larger I/O configurations. Technical Specifications Feature Specification Model Number KJ3001X1-BE1 Carrier Capacity 8 Traditional S-Series I/O Modules Backplane Current 15 A max Bus Power Distribution 12 A per bus, 3 A max per slot I/O Module Support Digital Inputs/Outputs, Analog Inputs/Outputs Operating Temperature -40°C to 70°C (-40°F to 158°F) Storage Temperature -40°C to 85°C Humidity 5% to 95% RH non-condensing Shock 10 g half-sine, 11 ms Vibration 1 mm p-p (2–13.2 Hz), 0.7 g (13.2–150 Hz) Protection Rating IP20 Mounting Horizontal T-type DIN Rail Conformal Coating ISA-S71.04-1985 Class G3 Weight 0.85 kg Applications Central I/O backplane for DeltaV S-Series DCS networks High-density process control requiring modular, expandable I/O Continuous and batch control environments with hot-swap maintenance needs FAQ Q: Can the carrier be expanded beyond eight I/O modules?A: Yes, carriers can be connected end-to-end on a T-type DIN rail with carrier extenders to increase I/O capacity. Q: Are modules hot-swappable?A: Yes, individual I/O modules can be replaced while the carrier remains powered. Q: What environments is it rated for?A: Operating range is -40°C to 70°C, with conformal coating to resist corrosive gases and airborne contaminants. Q: Does it support multiple I/O types?A: Yes, it accommodates digital and analog inputs and outputs for flexible deployment.
$200.00 $100.00
-
EMERSON Emerson KC3010X1-BA1 DeltaV S-series Analog Input Plus Module
Product Description Overview The KC3010X1-BA1 is a high-density Analog Input (AI) Plus module designed for the DeltaV S-series Distributed Control System (DCS). Engineered for complex process environments, this 16-channel module integrates HART communication while maintaining robust operation in hazardous areas. It supports both 2-wire and 4-wire transmitters and ensures precise signal acquisition for critical process monitoring. Key Features 16 Analog Channels: Consolidates multiple process signals into a single module to reduce cabinet footprint. HART Pass-Through: Enables communication with HART-enabled field devices for diagnostics and configuration. High Reliability: Supports online maintainability and hot-swappable operation without disrupting other I/O modules. Advanced Protection: Includes G3 conformal coating for corrosive environments, open circuit detection, and high-resolution A/D conversion. Hazardous Area Certification: ATEX Zone 2, IECEx, and Class I Div 2 compliant, ensuring safe installation in explosive atmospheres. Technical Specifications Feature Specification Module Type Analog Input Plus, 16-channel Signal Type 4–20 mA DC, HART compatible HART Support v5, v6, v7 pass-through LocalBus Power 12 VDC, 150 mA Field Power 24 VDC, 500 mA Field Circuit Output 24 VDC, 30 mA per channel Operating Temperature -40°C to +70°C (-40°F to +158°F) Shock 10 g, half-sine, 11 ms Vibration 1 mm peak-to-peak (2–13.2 Hz), 0.7 g (13.2–150 Hz) Humidity 5–95%, non-condensing Airborne Contaminants ISA-S71.04-1985 Class G3 Terminal Keying Rotary key system for I/O card compatibility Applications Ideal for chemical, petrochemical, and manufacturing plants where high-density analog signal acquisition and HART integration are required. It is particularly suited for continuous processes where high availability and predictive maintenance are critical. FAQ Q: Can this module be replaced while the system is powered?A: Yes, the KC3010X1-BA1 supports hot-swappable installation on the S-series carrier. Q: Does it require calibration?A: No calibration is necessary. The module is factory calibrated and ready for use. Q: Which terminal block should I use?A: Use a compatible high-density 10-pin or 16-pin terminal block (e.g., KJ3221X1-EA1) to fully utilize all channels. Q: Is it suitable for hazardous locations?A: Yes, it is certified for ATEX Zone 2, IECEx, and Class I Div 2 hazardous areas.
$200.00 $100.00
-
EMERSON Emerson KJ3241X1-BA1 S-Series I/O Interface Carrier Module
Product Description Overview The Emerson KJ3241X1-BA1 serves as a high-performance S-series I/O interface carrier within the DeltaV Distributed Control System (DCS). This module functions as the central hub for S-series I/O cards, providing both power and communication pathways to ensure seamless interaction with DeltaV controllers. It is engineered for high-density installations, offering a compact, reliable solution for modern industrial control cabinets. Key Features and Advantages Hot-Swappable Architecture The carrier allows insertion or removal of I/O modules without powering down the system, minimizing downtime and supporting continuous operation in critical processes. Rugged Industrial Design G3 Conformal Coating: Protects internal circuitry from moisture, dust, and corrosive chemicals. Wide Temperature Range: Operates reliably from -40°C to +70°C, supporting harsh industrial environments. Shock and Vibration Resistance: Withstands 10g shock and vibration ranges from 2–150 Hz, ensuring stable performance. Power and Bus Support Redundant Power Inputs: Maintains operation even if one power source fails, critical for safety-sensitive applications. Local Bus Power: Provides 12 VDC at 300 mA to connected I/O modules, ensuring stable operation. Communication Interface: S-series Railbus connectivity facilitates fast, reliable data transfer between modules and the DeltaV controller. Compact and High-Density Integration Supports multiple S-series modules within a single footprint, reducing overall cabinet space while maximizing I/O density. Plug-and-Play Recognition Once modules are seated, the DeltaV system automatically identifies them, streamlining configuration and commissioning processes. Technical Specifications Feature Specification Model Number KJ3241X1-BA1 Module Type S-Series I/O Interface Carrier Local Bus Power 12 VDC at 300 mA Environmental Rating ISA-S71.04 Class G3, IP20 Operating Temperature -40°C to +70°C (-40°F to 158°F) Shock 10g, ½ sinewave, 11ms Vibration 1mm peak-to-peak 2–13.2Hz; 0.7g 13.2–150Hz Relative Humidity 5–95% non-condensing Mounting 35mm DIN Rail Hazardous Area Compliance ATEX Zone 2, Class 1 Div 2 Bus Interface S-Series Railbus Application Notes The KJ3241X1-BA1 is ideal for dense control cabinets requiring reliable communication between multiple S-series I/O modules and DeltaV controllers. Suitable for chemical, petrochemical, and power generation industries, it ensures continuous operation even in harsh environments. FAQ Q: Can I remove this carrier while the system is running?A: Only if the area is confirmed non-hazardous and modules are removed one at a time. Q: How do I ensure compatibility with I/O modules?A: Use the rotary keying system on the terminal blocks to match each module. Q: Does it require calibration?A: No calibration is needed, and it contains no user-serviceable parts. Q: Is this compatible with M-series hardware?A: No, this carrier is specifically for S-series I/O modules.
$200.00 $100.00
-
EMERSON Emerson KJ4001X1-CG1 I/O Carrier 8-Slot Expansion Vertical Series 2
Product Description Emerson DeltaV KJ4001X1-CG1 is an 8-slot vertical I/O carrier designed to expand DeltaV Series 2 controller nodes. This robust platform accommodates up to eight I/O modules, providing high-density signal interfacing in compact control cabinets. Its vertical orientation optimizes cabinet space while maintaining reliable system connectivity and bus stability. ApplicationsIdeal for industrial control environments, the KJ4001X1-CG1 is suitable for field signal integration including analog and digital I/O. It is frequently deployed in remote I/O panels or expansions of existing DeltaV controller setups, where hot-swap capability and environmental resilience are critical. Key Features Supports up to 8 DeltaV Series 2 I/O modules Vertical design maximizes cabinet space efficiency Integrated local bus distributes 24V DC and high-speed data to all slots Hot-swappable modules maintain system uptime during maintenance Conformal coating protects against dust, moisture, and corrosive gases Operating range from -40°C to 70°C, vibration-resistant Technical Specifications Feature Specification Model KJ4001X1-CG1 Carrier Type 8-slot Vertical I/O Interface Carrier Module Capacity 8 I/O modules with terminal blocks Mounting 35mm DIN rail or cabinet backplane Local Bus Current Up to 8 Amps Connectivity Requires vertical extender cable to controller Environmental Rating -40°C to 70°C, vibration resistant, G3 conformal coating Hot-Swap Support Yes I/O Compatibility DeltaV Series 2 I/O modules (AI, AO, DI, DO) FAQ Q: Can I populate all 8 slots with high-power analog output modules?A: Yes, but monitor total bus current. If voltage drop occurs, add a Local Bus Power Terminal (e.g., KJ3004X1-BA1). Q: Is this compatible with Series 1 DeltaV I/O?A: The carrier primarily supports Series 2 modules, but terminal blocks for Series 1 may require additional adapters. Similar Models ComparisonThe KJ4001X1-CC1 serves as the controller carrier, whereas the CG1 is purely for I/O expansion.
$200.00 $100.00
-
EMERSON Emerson KJ4001X1-CA1 DeltaV Series 2 I/O Carrier Module Industrial
Product Description Overview The KJ4001X1-CA1 from Emerson is a robust horizontal I/O carrier designed for the DeltaV Series 2 System 8000. It provides a secure platform for controllers and power supplies, enabling reliable communication and power distribution within a distributed control system. Engineered for hazardous environments, this carrier is fully compliant with Zone 2 certifications, ensuring safe operation in demanding industrial settings. Key Features Modular Design and Expansion Rigid horizontal carrier with DIN-rail mounting for secure installation. Supports two DeltaV controllers and two system power supplies. Scalable design allows integration with additional carriers via plug-in bus connectors. Redundancy for High Availability Dedicated slots for redundant controllers and power supplies. Maintains local bus power and control continuity even if one controller or supply fails. Integrated Communication Infrastructure Built-in local bus connects controllers to I/O modules. Dual Ethernet ports support redundant 10/100 Mbps connections for high-speed network integration. Safe Handling and Maintenance Carrier ID plug ensures software configuration aligns with physical installation. T-box power connectors simplify wiring and reduce installation errors. Removal and insertion only allowed with system power de-energized to meet safety requirements. Industrial-Grade Durability Operates from -40°C to +70°C. Conformal coating provides resistance to moisture and corrosive airborne contaminants (ISA-571 Class G3). Shock- and vibration-resistant design ensures reliable field operation. Technical Specifications Feature Specification Model KJ4001X1-CA1 Type Power/Controller Carrier (Horizontal) Controller Slots 2 Power Supply Slots 2 Mounting Standard 35 mm DIN Rail Local Bus Current Up to 8 A Input Power 250 VAC / 60 VDC, 1 A per channel Network Interface Redundant 10/100 Mbps Ethernet Operating Temperature -40°C to +70°C Shock Resistance 10 g, half-sine, 11 ms Vibration Resistance 1 mm p-p (2–13.2 Hz), 0.7 g (13.2–150 Hz) Humidity 5–95% non-condensing Hazardous Location Compliance Class I, Zone 2 Contaminant Resistance ISA-571.04 Class G3 Application Scenarios Ideal for chemical, oil and gas, and process manufacturing environments, the KJ4001X1-CA1 supports mission-critical operations where redundancy, durability, and safe operation in hazardous zones are essential. FAQ Q: Can this carrier be installed in hazardous zones?A: Yes, it is certified for Class I, Zone 2 hazardous areas. Q: How many controllers can it hold?A: It accommodates two controllers, supporting full redundancy. Q: Can power supplies be replaced without shutting down the system?A: No, system power must be de-energized during installation or removal to ensure safety. Q: Can additional I/O carriers be connected?A: Yes, via the plug-in bus connector for scalable system expansion. Similar Models: KJ4001X1-BE1 (I/O expansion carrier), KJ4001X1-DA1 (vertical variant)
$200.00 $100.00
-
EMERSON Emerson KJ3001X1-BJ1 | DeltaV Digital Input Module 8-Channel
Product Overview The Emerson KJ3001X1-BJ1 is an 8-channel digital input module for the DeltaV™ Distributed Control System (DCS). Designed to integrate seamlessly into DeltaV M-series power/controller carriers, it converts field signals into reliable digital inputs for process control. The module supports dry contact, solid-state, and voltage inputs while providing built-in diagnostic monitoring for system reliability. Key Features Eight Optically Isolated Channels: Ensures immunity from electrical interference. Multi-Signal Support: Compatible with dry contacts, solid-state devices, and voltage signals. Integrated Diagnostics: Includes LEDs for individual channel and module status, plus fault reporting. Robust Construction: G3 conformal coating protects against corrosive industrial environments. Wide Operating Temperature: Functional from -40°C to 70°C. Easy Maintenance: Modular plug-in design allows hot-swappable operation in redundant setups. Performance Highlights Stable Dual-Rail PowerThe KJ3001X1-BJ1 functions as a local bus power regulator: 5 VDC Rail: Powers controller logic and CPUs. 12 VDC Rail: Powers I/O modules and communication interfaces.This separation stabilizes the power supply and protects sensitive electronics from field voltage fluctuations. Redundancy and High Availability 1:1 Redundancy: Supports load sharing across paired modules. Hot-Swap Capability: Replace a failed module without interrupting system operation. Advanced Monitoring Remote Diagnostics: Sends real-time health status to DeltaV Diagnostic Explorer. Local LED Indicators: Green for normal operation, Red for faults, enabling quick field troubleshooting. Industrial-Grade Design Fanless Cooling: Convection-cooled design reduces dust accumulation and mechanical failure. Environmental Resistance: G3 coating and high temperature tolerance ensure operation in challenging industrial conditions. Technical Specifications Feature Specification Model Number KJ3001X1-BJ1 Module Type Digital Input Module / Local Bus Power Controller Input Channels 8 Optically Isolated Channels Supported Inputs Dry Contact, Solid-State, Voltage Output Power Rails 5 VDC and 12 VDC Current Capacity Up to 8 Amps Operating Temperature -40°C to 70°C Protection Features Over-voltage, Short-circuit, Thermal Redundancy Support Yes, hot-swappable with paired modules Mounting DeltaV Power/Controller Carrier Applications Ideal for industrial control processes requiring reliable digital input monitoring, such as chemical processing, oil & gas, water treatment, and manufacturing automation. Suitable for both standalone and redundant DeltaV M-series nodes. FAQ Q: What input types does this module support?A: Dry contact, solid-state, and voltage signals. Q: Can it be replaced while the system is running?A: Yes, it is hot-swappable in redundant configurations. Q: What is the operating temperature range?A: -40°C to 70°C for industrial reliability. Q: What does the BJ1 revision signify?A: G3 conformal coating and updated internal components for enhanced environmental resistance.
$200.00 $100.00
-
EMERSON Emerson KJ3002X1-BF1 | DeltaV RTD Input Module 8-Channel
Product Overview The Emerson KJ3002X1-BF1 is an 8-channel RTD input module for the DeltaV™ Distributed Control System (DCS). It converts signals from RTD, thermocouple, mV, and VDC sensors into accurate digital readings for the controller. Designed for industrial process control, it ensures reliable temperature monitoring and smooth integration with DeltaV M-series hardware. Key Features Multi-Sensor Compatibility: Supports RTD, thermocouple, mV, and VDC inputs. Eight Channels: Measures multiple points simultaneously with high precision. High Accuracy: ±0.1% full-scale for reliable data acquisition. Rapid Update: Reads all eight inputs every 100 ms for near real-time control. Shielding Included: Minimizes signal noise and electrical interference. Compact Modular Design: 8-wide form factor for efficient carrier installation. Performance Characteristics Reliable Temperature ConversionThe module transforms analog sensor readings into stable digital values for DeltaV controllers, enabling precise process control and data logging. Local Bus IntegrationPowered by 12 VDC at 160 mA, the module draws only 1.5 W, making it energy-efficient while maintaining performance. The regulated internal bus isolates sensitive controller electronics from bulk 24 VDC supply fluctuations. Redundancy and Hot-Swap CapabilityWhen deployed in redundant configurations, the KJ3002X1-BF1 allows seamless failover: If one module fails, the partner module immediately takes over the load. Hot-swappable design ensures no process interruption during maintenance. Industrial Reliability Convection Cooling: Fanless architecture reduces mechanical failures and dust accumulation. Wide Operating Range: Functions in temperatures from -40°C to +85°C and standard industrial humidity. Rugged Construction: Meets EMI/RFI resistance standards, suitable for harsh environments. Technical Specifications Feature Specification Model Number KJ3002X1-BF1 Module Type RTD Input Module Number of Channels 8 Input Types RTD, Thermocouple, mV, VDC Accuracy ±0.1% Full Scale Update Rate 8 channels in 100 ms Shielding Included Local Bus Power 12 VDC, 160 mA Power Consumption 1.5 W Operating Temperature -40°C to +85°C Storage Temperature -40°C to +85°C Dimensions (WxHxD) 8-wide (standard DeltaV carrier) Mounting DeltaV Power/Controller Carrier Protection EMI/RFI resistant Applications Ideal for high-accuracy temperature monitoring in chemical, oil & gas, water treatment, and process industries. Suitable for both standalone and redundant DeltaV M-series control nodes. FAQ Q: What types of sensors are supported?A: RTD, thermocouple, mV, and VDC sensors. Q: Can the module be replaced while the system is running?A: Yes, it is hot-swappable when used in a redundant setup. Q: How fast does the module update measurements?A: All eight channels update every 100 milliseconds for near real-time monitoring. Q: Is it suitable for harsh industrial environments?A: Yes, it operates from -40°C to +85°C and meets EMI/RFI resistance standards.
$200.00 $100.00
-
EMERSON Emerson KJ3002X1-BC1 | DeltaV Analog Input Module 8-Channel
Product Overview The Emerson KJ3002X1-BC1 is an 8-channel analog input module engineered for the DeltaV™ Distributed Control System (DCS). It converts field analog signals into precise digital data for controllers and I/O modules, ensuring seamless integration and reliable performance in process control environments. Key Features Eight Independent Channels: Processes multiple 4–20 mA signals simultaneously. Local and Field Bus Power: Operates from 12 VDC local bus at 150 mA and supplies 24 VDC at 300 mA to connected field devices. High Accuracy: ±0.1% full-scale measurement ensures precise control and monitoring. Robust Industrial Design: Compact plug-in module with rugged housing suitable for harsh environments. Wide Environmental Tolerance: Operates from 0°C to 60°C, with storage from -40°C to 85°C. Shock and Vibration Resistance: Survives 10g shock (½ sine, 11 ms) and vibration up to 0.5g, 16–150 Hz. Performance Characteristics Reliable Analog-to-Digital ConversionThe module converts incoming 4–20 mA analog signals into high-resolution digital data, maintaining signal integrity even in electrically noisy environments. Redundancy and System IntegrationWhen paired with redundant DeltaV modules, the KJ3002X1-BC1 ensures uninterrupted data acquisition and supports active load sharing, providing high availability for mission-critical processes. Diagnostics and Status Feedback Front Panel LEDs: Quick identification of power and fault conditions. Software Integration: Communicates module health to DeltaV Explorer and Diagnostics applications, allowing proactive maintenance. Industrial Reliability Fanless Cooling: Reduces mechanical failure risks and eliminates dust accumulation issues. Environmental Protection: Resistant to airborne contaminants, vibration, and thermal stress common in process industries. Technical Specifications Feature Specification Model Number KJ3002X1-BC1 Module Type 8-Channel Analog Input Input Signal 4–20 mA Number of Channels 8 Local Bus Power 12 VDC at 150 mA Field Circuit Power 24 VDC at 300 mA Accuracy ±0.1% Full Scale Operating Temperature 0°C to 60°C Storage Temperature -40°C to 85°C Shock 10g, ½ sine, 11 ms Vibration 1 mm peak-to-peak (5–16 Hz), 0.5g (16–150 Hz) Relative Humidity 5% to 95%, non-condensing Dimensions (WxHxD) 42 mm × 125 mm × 105 mm Weight 0.2 kg Mounting DeltaV Power/Controller Carrier Protection Over-voltage, Over-current, Reverse Polarity Applications Ideal for connecting sensors, transmitters, and other analog field devices to DeltaV M-series control nodes. Common in chemical, oil & gas, water treatment, and process manufacturing environments where precision signal acquisition is essential. FAQ Q: Can this module handle high-accuracy measurements for process control?A: Yes, it provides ±0.1% full-scale accuracy across all eight channels. Q: Is it compatible with redundant DeltaV setups?A: Yes, it supports load-sharing and seamless integration in redundant nodes. Q: What input types are supported?A: Compatible with 4–20 mA analog signals from field transmitters. Q: Can it survive harsh industrial conditions?A: Yes, the module tolerates shock, vibration, extreme temperatures, and high humidity environments.
$200.00 $100.00
-
EMERSON Emerson KJ3001X1-BB1 | DeltaV 8-Channel Digital Input Module
Product Overview The Emerson KJ3001X1-BB1 is a high-performance 8-channel digital input module designed to connect dry contact field devices to DeltaV™ Distributed Control Systems (DCS). It provides precise, reliable input signal conversion for process control applications, ensuring controllers and I/O modules receive accurate digital signals from the field. Key Features 8 Independent Input Channels: Supports multiple dry contact devices simultaneously. Dry Contact Compatibility: Handles standard 24 VDC input signals with 5 mA per channel. Compact Industrial Form Factor: Fits DeltaV power/controller carriers, optimizing space in control cabinets. Local Bus Integration: Receives 12 VDC at 100 mA directly from the local bus. LED Indicators: Provides immediate visual feedback for power and input status. Durable Design: Withstands vibration, shock, airborne contaminants, and wide temperature ranges. Performance Characteristics Stable Signal ConversionConverts field 24 VDC dry contact signals into precise digital inputs for DeltaV controllers, protecting sensitive microprocessors from voltage fluctuations and ensuring reliable data transmission. Redundancy and High AvailabilitySupports 1:1 redundancy for critical systems: Dual modules can operate in hot standby or load-sharing mode. In the event of a failure, the backup module instantly assumes full operation without interrupting control processes. Integrated Diagnostics Front-Panel LEDs: Display “Power OK” and “Fault” conditions for quick local troubleshooting. System Alerts: Communicates with DeltaV Diagnostic Explorer to report module health, input loss, or voltage anomalies. Industrial Reliability Fanless Cooling: Convection design reduces mechanical failure risk and prevents dust accumulation. Wide Environmental Tolerance: Rated for -40°C to 70°C operation, vibration, shock, and G3-class contaminants. Technical Specifications Feature Specification Number of Channels 8 digital inputs Input Type Dry contact Input Voltage 24 VDC Input Current 5 mA per channel Local Bus Power 12 VDC at 100 mA Field Circuit Rating 24 VDC at 5 mA per channel Operating Temperature 0°C to 60°C Shock 10g, sinewave, 11 ms Vibration 1 mm peak-to-peak 5–16 Hz; 0.5g 16–150 Hz Airborne Contaminants ISA-S71.04-1985 Class G3 Relative Humidity 5–95%, non-condensing Ingress Protection IP20 Dimensions 3.8 cm × 10.7 cm × 12.7 cm (1.5" × 4.2" × 5.0") Weight 0.2 kg (7.1 oz) Terminal Block Key B1 Applications Ideal for M-series DeltaV control nodes where dry contact field inputs are required, such as sensors, switches, or relay-based signals. Ensures reliable monitoring in chemical, oil & gas, and process control environments. FAQ Q: Can this module interface with other DeltaV input modules?A: Yes, fully compatible with M-series DeltaV controllers and I/O modules. Q: What redundancy configurations are supported?A: Supports 1:1 hot-standby redundancy to maximize uptime. Q: What is the maximum input current per channel?A: 5 mA per channel at 24 VDC nominal. Q: Can it operate in harsh environments?A: Yes, rated for vibration, shock, and Class G3 airborne contaminants.
$200.00 $100.00
-
EMERSON Emerson KJ3002X1-BB1 | DeltaV 8-Channel Analog Output Module
Product Overview The Emerson KJ3002X1-BB1 is an 8-channel analog output module engineered for DeltaV™ Distributed Control Systems. It provides precise 4-20 mA current loop outputs for controlling field devices, including actuators and analog-driven equipment. Designed for compact integration, this module ensures accurate signal transmission for critical process automation tasks. Key Features Eight Independent Channels: Each channel configurable to support multiple output devices. High-Precision Analog Output: 16-bit DAC with ±0.15% full-scale accuracy at 25°C. DeltaV Compatibility: Seamlessly integrates with M-series and S-series controllers. Compact and Reliable Design: Fanless operation and robust construction for long-term stability. Electrical Isolation: 250 VAC between channels and system to protect against ground loops. Fast Update Rate: Typical 50 ms per channel for responsive process control. Technical Specifications Feature Specification Channels 8 independently configurable outputs Output Range 4-20 mA nominal Resolution 16-bit Digital-to-Analog Conversion Accuracy ±0.15% of span at 25°C Load Resistance Max 600 Ω at 24 VDC Input Power 24 VDC ±10% Power Consumption Max 2.8 W Operating Temp -40°C to 70°C Relative Humidity 5–95%, non-condensing Isolation 250 VAC between channels and system Dimensions 12.5 cm H × 4.2 cm W × 10.5 cm D Weight 0.25 kg approx. Update Rate 50 ms per channel typical Applications Ideal for controlling actuators, valves, and other analog field devices in process industries such as chemical, oil & gas, power generation, and water treatment. Provides reliable, precise outputs for mission-critical process automation. FAQ Q: Can this module be integrated with other DeltaV modules?A: Yes, it is fully compatible with M-series and S-series DeltaV controllers. Q: How precise is the analog output?A: The module uses a 16-bit DAC, achieving ±0.15% of span accuracy at 25°C. Q: Does it require cooling fans?A: No, the design is fanless and uses natural convection to maintain safe operating temperatures. Q: What is the recommended load resistance?A: Maximum 600 Ω at 24 VDC to ensure proper 4-20 mA output operation.
$200.00 $100.00
-
EMERSON Emerson KJ3243X1-BA1 | High-Density I/O Termination Block | DeltaV
Product Description The Emerson KJ3243X1-BA1 is a 32-channel Vertical Plus termination block designed for DeltaV™ Distributed Control Systems. It serves as a robust physical interface between field instruments and I/O modules, ensuring reliable signal transmission in high-density wiring setups. Compatible with S-series and M-series I/O modules, it mounts directly on DeltaV 2-wide or 8-wide carriers. Key Features High-Density Channel Support: 32 independent connections minimize cabinet space and optimize control room layouts. Hot-Swappable Modules: Enables maintenance without disconnecting field wiring, improving system uptime. Signal Integrity Protection: Integrated shielding and grounding paths reduce EMI, maintaining signal accuracy. Fused Channel Protection: Individual circuits safeguard I/O modules against field faults. Industrial Reliability: Built for harsh environments with shock, vibration, and temperature resistance. Technical Specifications Specification Details Channels 32 Input Voltage 24 VDC nominal, 30 VDC max Local Bus Power 12 VDC @ 150 mA Bussed Field Power 24 VDC @ 3.2 A per card Field Circuit Output 24 VDC @ 100 mA per channel Terminal Type High-density screw terminals Ambient Temperature -40°C to +70°C (-40°F to 158°F) Shock Resistance 10 g, half-sine, 11 ms Vibration Resistance 1 mm peak-to-peak (2–13.2 Hz), 0.7 g (13.2–150 Hz) Airborne Contaminants ISA-571.04 Class G3 Relative Humidity 5–95%, non-condensing IP Rating IP20 Applications Ideal for process automation in industries such as chemical, oil & gas, and power generation, where high-density field connections and continuous system availability are critical. Provides secure and organized wiring for both digital and analog signals in demanding industrial environments. FAQ Q: Can the KJ3243X1-BA1 be used with both S-series and M-series I/O modules?A: Yes, it is compatible with both series when mounted on the appropriate DeltaV carrier. Q: Is field wiring required to be disconnected for maintenance?A: No, the hot-swappable design allows module replacement without disturbing connected field wiring. Q: What environmental conditions can it operate in?A: Supports -40°C to +70°C temperatures, vibration, shock, and non-condensing humidity up to 95%.
$200.00 $100.00
You have seen 696 out of 2306 products