Honeywell TDC 3000
-
Honeywell Honeywell MC-TAIH22 80366195-150 High-Level Analog Input FTA
Honeywell MC-TAIH22 High-Level Analog Input FTA The Honeywell MC-TAIH22-150, also cataloged as the MC-TAIH22 High-Level Analog Input FTA, operates as a dedicated hardware component for analog signal acquisition within Honeywell Experion PKS and TDC 3000 / TPS control systems. Hardware Specifications Parameter Specification Model MC-TAIH22 Brand Honeywell Part Number 80366195-150 Origin USA Module Type High-Level Analog Input Field Termination Assembly (HLAI FTA) Operating Temp 0 deg C to 60 deg C Storage Temp -40 deg C to 85 deg C Relative Humidity 5% to 95% RH, non-condensing Input Channels 16 channels Input Signal Range 4-20 mA / 1-5 VDC Signal Type High-level analog input Signal Isolation Channel protection and field-side signal conditioning Coating Conformal coated PCB assembly Mounting Method FTA mounting channel / DIN rail compatible Redundancy Support Supports redundant I/O configurations depending on system architecture Terminal Connection Pluggable terminal block interface HART Loop and Analog Signal Processing Features The Honeywell MC-TAIH22 processes standard industrial analog signals from field transmitters and sensors before transferring conditioned data to the Experion PKS or TDC 3000 / TPS I/O subsystem. Moreover, the module supports typical 4-20 mA HART loop applications, allowing compatible smart field devices to transmit measurement data and diagnostic information through the analog communication path. The FTA design provides channel-to-channel signal separation and field wiring protection. Therefore, the module reduces interference effects caused by ground potential differences and electrical noise during analog signal transmission. The conformal coating protects the PCB assembly against moisture, dust, and corrosive environmental conditions. In addition, the MC-TAIH22 supports integration with Honeywell process control architectures where analog measurement accuracy depends on stable field termination, signal conditioning, and controlled wiring interfaces. Frequently Asked Questions Q: Does the MC-TAIH22 support direct connection of 4-20 mA field transmitters?A: Yes. The module is designed for high-level analog input signals, including typical 4-20 mA transmitter loops and 1-5 VDC analog signals. Q: Does the conformal coating change the electrical connection method?A: No. The conformal coating protects the PCB surface while maintaining the specified field terminal and system interface connections. Q: Can the MC-TAIH22 operate in a redundant I/O configuration?A: The module can participate in redundant I/O arrangements when installed within compatible Honeywell system configurations. The actual redundancy behavior depends on the controller and I/O architecture. Field Installation Guidelines Install the MC-TAIH22 on the specified Honeywell FTA mounting hardware and verify mechanical alignment before connecting field wiring. Use shielded signal cables for analog transmitter connections where required by the plant grounding standard. Connect cable shields according to the approved instrumentation grounding scheme to reduce electrical noise and signal distortion. Separate analog signal wiring from high-voltage power cables, motor feeders, and switching circuits. Verify terminal assignments before applying field power to prevent incorrect loop connections. Confirm that the installed FTA matches the configured I/O database parameters in the Experion PKS or TDC 3000 / TPS system before commissioning.
$200.00 $100.00
-
Honeywell Honeywell MC-GPRD02 51304644-175 Power Distribution Assembly
Honeywell MC-GPRD02 Power Distribution Assembly Configured for GI power distribution execution in Honeywell control system hardware platforms, the Honeywell MC-GPRD02 (51304644-175) (MC-GPRD02 Power Distribution Assembly) provides direct physical power routing and interface support within compatible chassis configurations. Hardware Specifications Parameter Specification Model MC-GPRD02 Brand Honeywell Part Number 51304644-175 Origin USA Product Type GI Power Distribution Assembly System Compatibility Honeywell TDC 3000 / Experion PKS hardware platforms FTA Type GI Power Dist Assy Module Function Field power distribution interface assembly Mounting Type Rack / chassis slot installation Power Consumption Determined by connected field power distribution load DCS Signal Interface and Power Distribution Characteristics The MC-GPRD02 performs power distribution functions within Honeywell field termination architectures. Moreover, the assembly supports organized routing of field power connections between system hardware and connected field devices. Honeywell DCS interface assemblies commonly maintain electrical separation between control electronics and field wiring. Therefore, installation practices should consider channel isolation requirements, grounding methods, and field loop protection. The module belongs to the Honeywell process control hardware family, where field termination assemblies support connection management for analog and digital process signals. In addition, compatible Honeywell configurations may integrate signal interface standards such as 4-20 mA HART loop protocol, FOUNDATION Fieldbus, or Profibus PA depending on the connected I/O architecture. Frequently Asked Questions Q: Does the MC-GPRD02 provide independent control processing functions?A: No. The MC-GPRD02 functions as a power distribution assembly and does not operate as a standalone CPU or controller module. Q: Can the MC-GPRD02 be installed in any Honeywell chassis position?A: Installation requires compatibility with the designated Honeywell chassis and field termination assembly configuration. The mounting position should follow the system hardware manual. Q: Does the MC-GPRD02 support redundant power switching internally?A: Available documentation identifies the unit as a GI Power Dist Assy. Specific internal redundancy switching functions require confirmation from the applicable Honeywell system configuration. Field Installation Guidelines Verify the chassis slot assignment and hardware compatibility before installation. Disconnect field power sources before wiring or removing the assembly. Route field wiring separately from high-voltage and high-noise conductors to reduce electrical interference. Maintain proper shield termination and grounding practices according to the Honeywell installation manual. Inspect terminal connections for correct polarity and secure mechanical fastening. Confirm power distribution continuity and field device operation after installation.
$200.00 $100.00
-
Honeywell Honeywell MC-GOAX02 51304638-175 Analog Output FTA
Honeywell MC-GOAX02 Analog Output FTA Configured for galvanically isolated analog current output execution in Honeywell PMIO control systems, the Honeywell MC-GOAX02-175 (MC-GOAX02 Analog Output FTA) provides direct physical signal transmission for 4-20 mA field device control. Hardware Specifications Parameter Specification Model MC-GOAX02 Part Number 51304638-175 Brand Honeywell Origin USA Product Type Analog Output Field Termination Assembly System Platform Honeywell PMIO / TDC 3000 / TPS / HPM Output Channels 8 channels Output Signal 4-20 mA DC Isolation Type Galvanically isolated output channels Field Device Load Resistance Less than 750 ohms Terminals Compression type Coating Conformal coated Compliance CE compliant Dimensions Size B, 307 mm / 12.1 in Weight 2.0 kg Process Control Signal Isolation and Loop Interface The MC-GOAX02 implements galvanically isolated 4-20 mA output circuits for controlling Honeywell GI field devices. Moreover, each output channel maintains electrical separation between the PMIO electronics and external field wiring to reduce ground loop effects and signal interference. The module supports eight independent analog output channels with compression terminals for field cable termination. Therefore, the assembly provides a direct interface between controller output processing and external actuators, control valves, or other current-driven devices. For Honeywell process control applications, the module follows the standard 4-20 mA instrumentation loop architecture. In addition, the conformal coating protects the circuit assembly from environmental contamination during industrial installation conditions. Frequently Asked Questions Q: Does the MC-GOAX02 support redundant output configuration?A: No. The MC-GOAX02 does not support redundancy and operates as a non-redundant analog output field termination assembly. Q: What type of field signals does the MC-GOAX02 provide?A: The module provides galvanically isolated 4-20 mA DC analog output signals through eight output channels. Q: What terminal connection method does the module use?A: The MC-GOAX02 uses compression terminals for field wiring termination. Field Installation Guidelines Install the MC-GOAX02 inside the designated Honeywell PMIO termination structure according to the applicable system installation documentation. Use shielded instrumentation cables for analog current loops where required by the site grounding design. Connect cable shields according to the plant grounding standard and avoid parallel routing with high-voltage power cables. Verify field wiring polarity before applying power. Check that each 4-20 mA loop remains within the specified field device load requirement and confirm proper isolation between control-side and field-side circuits. Maintain suitable mechanical clearance around the termination assembly and secure all compression terminals to prevent loose connections during operation.
$200.00 $100.00
-
Honeywell MC-PDOX02 Digital Output Processor | Honeywell
Honeywell MC-PDOX02 Digital Output Processor Configured for 16-channel digital signal execution in Honeywell control system platforms, the Honeywell MC-PDOX02 (51304487-150) (MC-PDOX02 Digital Output Processor) provides direct physical output switching and field signal control. This conformally coated assembly supports protection against humidity and chemical gas exposure during industrial operation. Hardware Specifications Parameter Specification Model MC-PDOX02 Full Model Number 51304487-150 Brand Honeywell Product Type Digital Output Processor Function Digital Output (DO) processing module Output Channels 16 digital output channels Coating Type Conformally coated PCB assembly Compliance CE compliant part number: 51304487-150 System Compatibility Honeywell control system I/O architecture Signal Type Discrete digital output signals DCS Digital Output Signal Execution The MC-PDOX02 processes discrete output commands from the control system and transfers electrical switching signals to connected field devices. Moreover, the module architecture supports 16 output points within the digital output processing path. Honeywell digital output assemblies require controlled signal isolation and correct field wiring practices to maintain stable switching behavior. Therefore, installation should follow the applicable Honeywell I/O hardware configuration guidelines, including terminal assignment and grounding requirements. The conformal coating layer covers the electronic assembly with a protective polymer film. In addition, this coating reduces exposure effects from humidity and most chemical gases that may affect printed circuit assemblies in industrial environments. Frequently Asked Questions (FAQ) Q: Does the MC-PDOX02 provide 16 independent digital output channels?A: Yes. The MC-PDOX02 is specified as a Digital Output Processor with 16 output channels for discrete signal control. Q: What protection does the conformal coating provide on this module?A: The conformal coating provides a protective barrier against humidity and most chemical gas exposure on the electronic assembly. Q: Can the MC-PDOX02 be installed without checking field wiring requirements?A: No. Engineers should verify terminal assignments, field device connections, grounding methods, and system configuration before installation. Field Installation Guidelines Install the MC-PDOX02 within the designated Honeywell I/O rack or approved hardware enclosure. Verify module orientation and connector engagement before applying system power. Use appropriate field wiring practices for digital output circuits, including correct conductor routing and terminal identification. Separate signal wiring from high-voltage power cables to reduce electrical interference. Connect shielding and grounding according to the applicable Honeywell installation documentation. Inspect the conformal coating surface before installation to confirm that the PCB protection layer remains intact. Confirm I/O configuration parameters within the control system before enabling field outputs.
$200.00 $100.00
-
Honeywell Honeywell | MC-TDPR02 | Digital Input Modules
Honeywell MC-TDPR02 Digital Input Power Distribution Field Terminal Assembly The Honeywell MC-TDPR02-175, also cataloged as the MC-TDPR02 Digital Input Power Distribution Field Terminal Assembly, operates as a dedicated hardware component for distributing 24 VDC interrogation power and field wiring interfaces within Honeywell TDC 3000 and HPM system platforms. Hardware Specifications Parameter Specification Model MC-TDPR02-175 Brand Honeywell Origin United States Weight Approx. 0.2 lbs to 0.62 lbs depending on housing configuration Dimensions Approx. 2.25 x 4.75 x 6.00 inches Operating Temp Not specified in available documentation Power Consumption Passive field terminal assembly; power consumption depends on connected digital input circuits Part Number 51304425-175 Module Type Digital Input 24 VDC Power Distribution Field Terminal Assembly System Compatibility Honeywell TDC 3000 / High-Performance Process Manager (HPM) / Experion DCS platforms Distributed Voltage 24 VDC Terminal Quantity 12 terminal points Terminal Connection Compression / screw-type terminals Board Protection Conformally coated PCB Compliance CE compliant Form Factor Size A field terminal assembly Process Control Signal Distribution Characteristics The MC-TDPR02-175 provides physical termination and power distribution functions for Honeywell digital input field circuits. Moreover, the assembly routes 24 VDC interrogation power from the control system side to connected field sensing devices while maintaining organized signal termination. The conformally coated PCB structure improves protection against moisture, dust, and airborne industrial contaminants. Therefore, the assembly supports installation in control cabinets where environmental exposure requires additional circuit board protection. For Honeywell process instrumentation systems, field interface assemblies commonly operate with discrete input devices and DCS I/O architectures. In addition, channel-to-channel isolation principles and proper field wiring separation help maintain signal integrity in digital input applications. Frequently Asked Questions Q: Does the MC-TDPR02-175 provide active signal processing functions?A: No. The MC-TDPR02-175 functions as a field terminal and power distribution assembly. It does not execute digital signal processing or control logic. Q: What type of field wiring connections does the MC-TDPR02-175 support?A: The assembly uses compression or screw-type terminal connections for field device wiring and 24 VDC distribution circuits. Q: What is the purpose of the conformal coating on the PCB?A: The conformal coating provides additional protection for the circuit board against moisture, dust, and airborne contaminants. Field Installation Guidelines Install the MC-TDPR02-175 inside an approved Honeywell control cabinet or designated field termination enclosure. Verify that the connected power source matches the required 24 VDC field circuit configuration before wiring. Separate digital input signal cables from high-voltage power conductors to reduce electrical interference. Connect cable shields according to the system grounding design and avoid multiple grounding points that may create ground loops. Inspect terminal connections for correct wire seating and proper mechanical tightening before system commissioning. Confirm compatibility between the field terminal assembly and the associated Honeywell I/O processor configuration before replacement installation.
$200.00 $100.00
-
Honeywell Honeywell 2104B2081 Transmitter Gas Detector
Product Overview The Honeywell 2104B2081 is a versatile medium-range transmitter designed for industrial and hazardous area applications. It provides reliable 4–20 mA signal output and is available as a standard process transmitter or as a Searchline Excel infrared gas detection unit. Constructed with robust stainless steel housing and ATEX certification, this module is ideal for petrochemical plants, offshore oil and gas platforms, chemical processing facilities, and power stations. Technical Specifications Feature Specification Output Signal 4–20 mA DC (standard) Power Supply 24 VDC nominal Operating Temperature –40 °C to +85 °C Housing Material Stainless Steel Protection Class IP66 / IP67 Dimensions 211 × 353 × 433 mm Weight 0.68 kg Certifications ATEX, CE, TUV, UL508, CSA Technology (Gas Variant) Infrared absorption, open-path detection Applications Hazardous area monitoring, chemical plants, offshore platforms, power generation Key Features Certified for Hazardous Areas ATEX compliance ensures safe operation in explosive or high-risk industrial environments. Rugged Construction Stainless steel enclosure provides high durability and long service life in harsh outdoor or indoor conditions. Flexible Configuration Available either as a standard medium-range transmitter or as a Searchline Excel infrared gas detector for combustible gas monitoring. Environmental Protection IP66/IP67-rated housing resists dust, water ingress, and corrosive atmospheres. Accurate and Reliable Monitoring Infrared absorption technology enables continuous line-of-sight detection over large areas, ensuring precise measurement and early hazard detection. Applications Petrochemical and chemical plants Offshore oil and gas installations Power generation facilities Hazardous area monitoring and safety systems FAQ Is 2104B2081 compatible with all Honeywell systems? It is designed for Honeywell industrial monitoring systems. Confirm compatibility with your platform before purchase. What is the difference between the standard transmitter and gas detection variant? The standard version provides general process measurements, while the Searchline Excel variant uses infrared technology for combustible gas detection over extended areas. Can this module be used outdoors? Yes, the stainless steel IP66/IP67 housing allows operation in outdoor and harsh environments. How do I confirm which version I am purchasing? Check with your supplier to verify whether the unit is a standard process transmitter or an infrared gas detection variant.
$200.00 $100.00
-
Honeywell Honeywell 51202304-100 Drive Controller Module
Product Overview The Honeywell 51202304‑100 is a high-performance drive controller module engineered for Honeywell TDC 3000 and Experion PKS distributed control systems. It manages motor drives and actuators with precision, delivering reliable control over speed, torque, and movement. Built for continuous industrial operation, it integrates seamlessly with Honeywell DCS platforms and withstands harsh automation environments. Technical Specifications Feature Specification Function Motor and actuator drive control and regulation Signal Support Analog I/O and digital control signals Dimensions 102.2 × 12.4 × 12.6 mm Weight 0.2 kg Construction Rugged, industrial-grade for harsh conditions Operating Environment Continuous industrial automation Certifications CE, UL, CSA, TUV Compatibility Honeywell TDC 3000, Experion PKS DCS Key Features Precise Motor Control Provides accurate regulation of motor speed, torque, and actuator response for optimized process performance. Seamless System Integration Designed to work directly with Honeywell TDC 3000 and Experion PKS systems, ensuring stable communication and control. Compact Design Small form factor allows for easy installation in crowded control cabinets and drive racks. Reliability Engineered for continuous operation in demanding industrial environments without degradation. Certified Safety Compliant with international safety standards (CE, UL, CSA, TUV) for industrial control systems. Applications Control of motors and actuators in chemical, petrochemical, and manufacturing plants Integration into Honeywell TDC 3000 and Experion PKS distributed control systems Replacement or upgrade of existing drive controller modules in industrial automation networks FAQ Which systems is 51202304‑100 compatible with? It works with Honeywell TDC 3000 and Experion PKS DCS systems only. Not compatible with third-party PLCs. Can it handle both analog and digital signals? Yes, the module supports analog inputs/outputs and digital control signals for flexible automation integration. Is professional installation required? While installation is straightforward for trained personnel, ensure correct integration with the Honeywell DCS for safe operation. What is the expected operating environment? Designed for continuous use in industrial automation environments with stable performance under electrical and thermal stress.
$200.00 $100.00
-
Honeywell Honeywell 50028994-001 Thermostat Range Stop Assembly
Product Overview The Honeywell 50028994‑001 is a precision mechanical range stop designed for Honeywell thermostats. It restricts the adjustment range of thermostat setpoints, helping maintain controlled temperatures, prevent unauthorized changes, and enhance energy efficiency in commercial and industrial HVAC systems. Its durable construction ensures long-term performance in demanding indoor environments. Technical Specifications Feature Specification Compatibility Select Honeywell commercial thermostat models (verify before installation) Adjustment Limits Customizable stop limits for temperature setpoint control Material Industrial-grade plastic and metal components Dimensions 215 × 159 × 125 mm Weight 0.1 kg Installation Simple mechanical fit into compatible thermostat housing Certifications CE, UL, CSA Operating Environment Indoor HVAC control systems Key Features Energy Efficiency Limits thermostat settings to prevent excessive heating or cooling, reducing energy waste. Tamper Prevention Stops unauthorized adjustments, ensuring setpoints remain within the defined temperature band. Durable Construction Designed for long service life in commercial and industrial HVAC environments. Easy Installation Fits directly into compatible Honeywell thermostats without requiring special tools or modifications. Standards Compliance Certified to international safety and performance standards (CE, UL, CSA). Applications HVAC systems in commercial buildings and industrial facilities Thermostat control in schools, offices, and hospitals Energy management and setpoint enforcement in temperature-sensitive areas Replacement or upgrade for Honeywell thermostat range controls FAQ Which thermostats are compatible with 50028994‑001? It works with select Honeywell commercial thermostat models; always verify compatibility before purchase. Can the range limits be adjusted? Yes, the stop assembly allows you to define the maximum and minimum setpoints during installation. Is professional installation required? No, it is a mechanical assembly designed for straightforward installation by trained maintenance personnel. Does it affect HVAC system performance? It restricts setpoint adjustments without impacting normal thermostat operation, ensuring safe and controlled temperature management.
$200.00 $100.00
-
Honeywell Honeywell 51304903-100 Input/Output Module
Product Overview Honeywell 51304903‑100 (REV C) is a compact and reliable Input/Output (I/O) module engineered for the Honeywell TDC 3000 distributed control system. It provides seamless integration between field devices and system controllers, supporting both analog and digital signals. The REV C revision offers enhanced stability, compatibility, and durability for continuous industrial operations, ensuring high reliability in electrically noisy environments. Technical Specifications Feature Specification Function Interfaces field devices with control system logic Signal Support Analog and digital inputs/outputs Dimensions 215 × 159 × 125 mm Weight 0.24 lbs Certifications CE, TUV, UL508, CSA Design Version REV C – improved stability and compatibility Operating Environment Industrial automation, electrically noisy conditions Key Features Stable Data Communication Ensures reliable and consistent data exchange between sensors, actuators, and TDC 3000 controllers. Dual Signal Handling Supports both analog and digital I/O, enabling flexible system integration for a wide range of field devices. Enhanced Durability Engineered for long service life in demanding industrial environments. Improved Compatibility REV C revision provides enhanced integration and reliability with Honeywell TDC 3000 systems. Compact Installation Small form factor allows easy mounting within control cabinets and racks. Applications Linking field I/O devices to Honeywell TDC 3000 distributed control systems Handling both analog sensors and digital actuators in a single module Replacing older or worn I/O modules for system upgrades Integration in electrically noisy industrial environments requiring high reliability FAQ Is the 51304903‑100 compatible with other PLCs or DCS systems? No, this module is specifically designed for Honeywell TDC 3000 systems and is not compatible with third-party platforms. What does REV C indicate? REV C represents an improved version of the module, with enhanced stability and compatibility for TDC 3000 installations. What types of signals can this module handle? It supports both analog and digital signals, providing flexible integration for various field devices. How large is the module? It measures 215 × 159 × 125 mm and weighs approximately 0.24 lbs, allowing compact installation in control cabinets.
$200.00 $100.00
-
Honeywell Honeywell AID-3 51191590-200/D1 Operator Keyboard
Product Overview Honeywell AID‑3 51191590‑200/D1 is an industrial-grade operator keyboard and interface module designed for Honeywell TDC 3000 and TPS process control systems. It delivers a robust and responsive front-end for operators, combining tactile key feedback with durable construction. Optimized for continuous control room operations, this module ensures reliable input and streamlined workflow for complex process control environments. Technical Specifications Feature Specification Dimensions 580 × 450 × 240 mm Weight 2.5 kg Construction Rugged industrial-grade materials suitable for control room environments Interface Compatible with Honeywell TPS and TDC process control systems Key Layout Tactile keys designed for operator command input and efficient navigation Certifications CE, TUV, UL508, CSA Operating Environment Continuous use in industrial control rooms Key Features Reliable Operator Input High-durability keys with tactile feedback provide consistent and accurate response for process control operations. Optimized Workflow Compact and well-organized layout enables efficient menu navigation and quick command execution. System Integration Seamlessly connects to Honeywell TDC 3000 and TPS systems for operator interface and control. Industrial Durability Designed to withstand continuous operation in demanding control room environments. Certifications and Compliance Meets CE, UL, TUV, and CSA standards for safety and reliability in industrial applications. Applications Operator interface for TDC 3000 and TPS process control systems Input panel for control room operations requiring high durability Centralized command and monitoring in industrial process control Replacement or upgrade for Honeywell operator stations FAQ Is the AID‑3 51191590‑200/D1 compatible with other PLCs or DCS systems? No, it is designed exclusively for Honeywell TDC 3000 and TPS platforms. Can it withstand continuous operation? Yes, it is built with industrial-grade materials suitable for 24/7 use in control rooms. What is the physical size of the module? It measures 580 × 450 × 240 mm and weighs 2.5 kg; proper mounting space is required. What certifications does it have? It is certified to CE, UL508, TUV, and CSA standards.
$200.00 $100.00
-
Honeywell Honeywell 2MLQ-TR4B Digital Output Module
Product Overview Honeywell 2MLQ‑TR4B is a 32-point transistor digital output module for the MasterLogic‑200 PLC system. Designed for high-speed and reliable DC switching, it provides isolated output signals to control LEDs, relays, SSR coils, and other DC-powered devices. Compact yet high-density, this module delivers stable operation with photo-coupler isolation, making it ideal for industrial automation applications. Technical Specifications Feature Specification Output Type Transistor (Source type) Number of Channels 32 points Rated Load Voltage DC 12 V / 24 V Load Voltage Range DC 10.2–26.4 V Maximum Load Current 0.1 A per channel, 2 A per COM group Surge Protection Zener diode absorption Isolation Photo-coupler isolation between outputs and PLC power Response Time Fast switching suitable for high-speed applications Dimensions 426 × 98 × 19 mm Weight 0.18 lbs Key Features High Output Density 32 output points are provided in a compact form factor, optimizing control panel space. Reliable Isolation Photo-coupler isolation ensures stable signal transmission and electrical safety between outputs and PLC power. Fast Switching Performance Designed for rapid digital output applications, suitable for relay control, LED signaling, and SSR actuation. Industrial Compatibility Fully compatible with Honeywell MasterLogic‑200 PLC systems, ensuring seamless integration. Versatile Control Applications Supports DC-powered devices including LEDs, relays, and solid-state relay coils, allowing flexible automation system design. Applications Controlling field devices such as relays, LEDs, and SSRs High-speed switching for industrial process control Panel-mounted PLC digital output expansion Remote signal activation and monitoring FAQ What is the maximum current per output channel? Each channel supports up to 0.1 A, with a maximum of 2 A per COM group. Can it operate with devices outside 12–24 VDC? Connected devices should remain within the load voltage range of 10.2–26.4 VDC to ensure safe operation. Is it compatible with other PLC brands? It is designed specifically for MasterLogic‑200 systems. Use with other PLCs requires verification and possible adaptation. What types of devices can it control? It can control LEDs, relays, and solid-state relay coils powered by DC voltage within the rated range.
$200.00 $100.00
-
Honeywell Honeywell 2MLF-AC8A 8-Channel Analog Input Module
Product Overview Honeywell 2MLF-AC8A is an 8-channel analog input module specifically designed for the MasterLogic‑200 PLC platform. It converts standard industrial current signals (0–20 mA or 4–20 mA) into accurate digital values, enabling precise monitoring and control of sensors such as temperature, pressure, and flow devices. Compact and robust, this module is built for reliable performance in demanding industrial environments. Technical Specifications Feature Specification Number of Channels 8 analog input channels Signal Type 0–20 mA or 4–20 mA Conversion Accuracy ±0.2% at 25°C ±5°C, ±0.3% at 0–55°C Maximum Conversion Speed 250 µs per channel Absolute Maximum Input ±30 V DC Isolation Photo-coupler isolation between input terminals and PLC power (no isolation between channels) Terminal Connections 18-point terminal I/O Addresses Fixed type: 64 points, Variable type: 16 points Power Consumption DC 5 V: 420 mA Dimensions 125 × 50 × 130 mm Weight 0.14 kg Indicators LED status indicators per channel Operating Environment Industrial automation systems, harsh conditions Key Features Accurate Signal Conversion Converts analog current signals into precise digital values for PLC processing, ensuring reliable data acquisition from field sensors. High Reliability Engineered for continuous operation in harsh industrial environments with robust isolation and protection. Compact and Efficient Design Small footprint allows easy installation in control panels and integration with MasterLogic‑200 PLC racks. Compliance and Safety Meets CE, UL, TUV, and CSA standards. Photo-coupler isolation provides electrical safety between PLC power and input signals. Seamless Integration Fully compatible with Honeywell MasterLogic‑200 PLC systems for analog data acquisition and control. Applications Collecting sensor signals from temperature, pressure, and flow devices Accurate monitoring and control in industrial process automation Panel-mounted PLC I/O expansions Remote data acquisition and diagnostics FAQ What types of signals does 2MLF-AC8A support? It supports standard industrial current signals: 0–20 mA or 4–20 mA, suitable for a wide range of sensors. Is the module isolated between channels? No, isolation is only between input terminals and PLC power. Channels share a common reference. Can it be used outside the MasterLogic-200 system? It is optimized for MasterLogic‑200 PLCs. Compatibility with other PLCs should be verified. What is the maximum input voltage the module can handle? The absolute maximum input per channel is ±30 V DC.
$200.00 $100.00
-
Honeywell Honeywell 2MLL-C42B Analog I/O Module
Product Overview Honeywell 2MLL-C42B is an industrial-grade module from the MasterLogic-200 series, available in two main configurations: an analog input/output module and a dual-channel RS422/485 communication interface module. Designed for industrial automation systems, it emphasizes reliability, flexible integration, and compliance with international standards. Technical Specifications Feature Details Type Analog Input/Output Module Dimensions 256 × 169 × 145 mm Weight 0.6 lbs Communication Dual-channel RS422/485 (Communication Version) Maximum Distance Up to 500 meters (RS422/485) Indicators & Diagnostics LED status indicators, built-in diagnostic functions Software Compatibility SoftMaster-NM configuration software Performance Fast processing, noise-resistant transmission, flexible configuration Key Features Analog I/O Module (2MLL-C42B – Analog) Precise logic control for industrial signal processing Flexible configuration and fast processing Compatible with standard industrial protocols Communication Module (2MLL-C42B – RS422/485) Dual-channel interface for stable, noise-resistant data transmission Supports multiple network topologies Long-distance communication up to 500 meters Easy integration with LED indicators and configuration software Applications Signal acquisition and control in industrial automation lines Data communication between PLC systems and external devices Remote monitoring and diagnostics for control systems FAQ How to distinguish the two 2MLL-C42B versions? Confirm with the supplier whether the module is the analog I/O version or the communication interface version, as their functionality and connectors differ. Can it be used with non-Honeywell PLC systems? It is designed primarily for MasterLogic-200 systems. Compatibility with other PLCs must be verified before integration. What is the maximum distance supported by the RS422/485 module? Up to 500 meters, suitable for long-distance industrial network applications.
$200.00 $100.00
-
Honeywell Honeywell 2MLL-EFMT Fast Ethernet Communication Module
Product Description The Honeywell 2MLL-EFMT is a high-speed Ethernet communication module specifically designed for the MasterLogic-200 PLC platform. It enables reliable 10/100 Mbps data exchange between PLC controllers, supervisory systems, and external devices, supporting seamless integration with SCADA, DCS, and industrial Ethernet networks. Built for demanding industrial environments, this compact module delivers stable 24 VDC power, wide temperature tolerance, and robust connectivity in a small footprint for flexible cabinet installation. Technical Specifications Specification Details Model 2MLL-EFMT Module Type Fast Ethernet Communication Module System Compatibility Honeywell MasterLogic-200 PLC Ethernet Interface 10/100 Base-TX, auto-negotiation Connector Type RJ-45, supports CAT5 UTP/STP cabling Protocols Supported Modbus TCP, standard industrial Ethernet protocols Power Supply 24 VDC Power Consumption ≤6 W Operating Temperature -40 °C to +85 °C Dimensions (WxDxH) 48 × 48 × 34 mm Weight 3.31 lbs Mounting DIN-rail or panel mount Certifications CE, UL, industrial EMC compliance Key Features & Advantages High-speed Ethernet communication with 10/100 Mbps support Supports multiple industrial protocols for flexible integration Wide operating temperature range for harsh environments Compact design for easy installation in control cabinets Auto-negotiation ensures seamless network connectivity Low power consumption (≤6 W) for energy-efficient operation Applications The Honeywell 2MLL-EFMT is ideal for: MasterLogic-200 PLC networking and data communication SCADA and DCS integration in industrial plants Factory and process automation requiring fast, reliable Ethernet Systems where compact and robust modules are essential for cabinet space FAQ Q: What Ethernet speeds does this module support?A: 10/100 Mbps with auto-negotiation. Q: What is the power requirement?A: 24 VDC, consuming ≤6 W. Q: How is the module mounted?A: Supports DIN-rail or panel mounting. Q: Is it suitable for extreme temperatures?A: Yes, it operates reliably from -40 °C to +85 °C.
$200.00 $100.00
-
Honeywell Honeywell 2MLP-AC23 MasterLogic-200 Power Supply Module
Product Description The Honeywell 2MLP-AC23 is a high-performance power supply module engineered for the MasterLogic-200 control system. It delivers a stable 24 VDC output to controllers, I/O modules, and communication devices, with built-in protection features to guard against overload, short circuit, and overheating. Designed for continuous operation in industrial environments, this module combines efficiency, reliability, and compact design, making it ideal for cabinets in petrochemical plants, water treatment facilities, pharmaceuticals, and power generation systems. Technical Specifications Specification Details Model 2MLP-AC23 Input Voltage Range 85–264 VAC, 47–63 Hz Input Current 2.5 A at 115 VAC, 1.2 A at 230 VAC Inrush Current ≤20 A peak Output Voltage 24 VDC regulated Output Current 10 A nominal, 12 A peak Output Power 240 W (high-performance) / 72 W (compact version) Efficiency ≥85–88% Ripple & Noise <1% typical Protection Features Overvoltage, overload, short-circuit, over-temperature Cooling Method Natural convection (fanless) Operating Temperature -25 °C to +70 °C Storage Temperature -40 °C to +85 °C Relative Humidity 5–95% non-condensing Dimensions 125 × 50 × 130 mm Weight 0.6 kg Mounting Options DIN-rail or panel-mounted Certifications CE, UL, RoHS Voltage Indicator LED shows output voltage status Cable Specification 0.75–2 mm² Compressed Terminal RAV 1.25–3.5, RAV 2–3.5 Key Features & Advantages High reliability for continuous, mission-critical operation Wide input range compatible with global AC mains (85–264 VAC) Built-in protections against electrical faults and thermal overload Compact form factor for convenient cabinet installation Energy-efficient design reduces heat generation and operational cost Easy maintenance with modular construction for quick replacement Applications The Honeywell 2MLP-AC23 is suitable for: MasterLogic-200 controllers and I/O modules Industrial automation systems in petrochemical, pharmaceutical, and water treatment plants Power generation and distribution systems requiring 24 VDC stable output Cabinets with limited space needing high-performance power supply FAQ Q: What is the output voltage and current?A: Provides 24 VDC at 10 A nominal, up to 12 A peak. Q: How is the module cooled?A: Fanless design using natural convection. Q: What protections are included?A: Overvoltage, overload, short-circuit, and over-temperature protection. Q: Can it handle global AC mains voltages?A: Yes, input range is 85–264 VAC, 47–63 Hz.
$200.00 $100.00
-
Honeywell Honeywell 51402797-200 Analog Input Module
Product Description The Honeywell 51402797-200 is a 16-channel analog input module engineered for Honeywell Distributed Control Systems, including Experion PKS and legacy TDC platforms. It acquires and converts analog signals from field instruments such as temperature, pressure, and flow sensors into digital data for precise monitoring and control. With Modbus RTU communication, dual Ethernet/RS-485 connectivity, and rugged aluminum construction, this module provides reliable performance in industrial environments. It is optimized for integration, high signal fidelity, and efficient cabinet space usage. Technical Specifications Specification Details Channels 16 analog input channels Signal Range 0–10 VDC, 0–20 mA Supported Signals 4–20 mA current loop, 0–10 V voltage input Sampling Rate ~100 ms Communication Protocol Modbus RTU Connectivity 1 × Ethernet, 1 × RS-485 Power Consumption ~5 W Operating Temperature -20 °C to +60 °C (-4 °F to +140 °F) Storage Temperature -40 °C to +85 °C (-40 °F to +185 °F) Material / Protection Aluminum alloy housing, IP20 protection Dimensions 2 × 13.5 × 23.8 cm Weight 0.25 kg Key Features & Advantages High-density design with 16 input channels reduces cabinet footprint Supports both voltage (0–10 V) and current (4–20 mA) signals Robust industrial-grade aluminum housing with IP20 protection Modbus RTU communication and dual Ethernet/RS-485 interfaces for seamless integration Diagnostics support for signal integrity and module health monitoring Applications The Honeywell 51402797-200 is suitable for: Refining and petrochemical processes Power generation monitoring and control Chemical manufacturing instrumentation Any system requiring high-accuracy analog signal acquisition FAQ Q: Can this module be used outside Honeywell systems?A: It is primarily designed for Honeywell DCS platforms; limited functionality may be available in other systems with Modbus RTU. Q: What is the maximum operating temperature?A: The module operates up to +60 °C (+140 °F). Q: How many input channels does it support?A: 16 analog channels per module. Q: What types of analog signals are supported?A: Both 4–20 mA current loops and 0–10 V voltage signals.
$200.00 $100.00
-
Honeywell Honeywell 51153998-100 Cabinet Power Entry Module
Product Description The Honeywell 51153998-100 is primarily a cabinet power entry module designed for TDC 3000 and Experion PKS control systems, providing a safe and reliable 240 VAC power interface for controllers, I/O modules, and communication devices. Some catalogs also list this module as a 32-channel digital output card, capable of distributing 24 VDC signals across DCS subsystems. Built for industrial cabinets, it delivers stable power, surge protection, and compact integration, making it suitable for high-density installations and mission-critical operations. Technical Specifications Specification Details Channels 32 Digital Outputs Voltage Range 24 VDC ±10% Current Rating 0.5 A per channel (8 A total) Power Consumption 6 W Switching Frequency Up to 1 kHz Isolation 1500 V AC channel-to-bus Operating Temperature -40°C to +70°C Storage Temperature -40°C to +85°C Key Features & Advantages Reliable cabinet-level power distribution for Honeywell DCS subsystems Surge protection against transient overvoltage events Compact form factor for high-density cabinet installation Digital output variant provides per-channel monitoring and hot-swappable operation Compliance with global safety and EMC standards (CE, UL, CSA) Applications The Honeywell 51153998-100 is suitable for: Legacy Honeywell TDC 3000 and Experion PKS systems Industrial control cabinets and distributed control subsystems Process control applications in chemical, refining, and power generation industries FAQ Q: Is this module always a power entry module?A: Primarily yes, but some suppliers list it as a 32-channel digital output card. Always verify the intended use. Q: Can it be used with modern Series-C modules?A: No, it is designed for legacy TDC 3000 and early Experion PKS platforms. Q: What protections does it provide?A: Built-in surge protection for safe distribution of 240 VAC to cabinet subsystems. Q: How is the module mounted?A: It supports rack or cabinet mounting in industrial control enclosures.
$200.00 $100.00
-
Honeywell Honeywell 51199929-100 SPS5710 Smart Valve Positioner Electro-Pneumatic
Product Description The Honeywell SPS5710 (51199929-100) is a high-precision electro-pneumatic smart positioner designed for accurate control of industrial valves. Part of Honeywell’s SPS57xx series, this device converts electrical control signals into pneumatic outputs, enabling precise valve positioning for both linear and rotary actuators. Built for reliability and robust operation, it integrates seamlessly with Honeywell Experion PKS systems as well as other HART-enabled DCS or PLC platforms, providing advanced diagnostics and predictive maintenance capabilities. Technical Specifications Specification Details Signal Input 4–20 mA DC Communication Protocols HART standard; optional Fieldbus/Profibus Valve Types Supported Linear and rotary actuators Air Supply Pressure 1.4–7 bar (20–100 psi) Air Consumption Low steady-state air consumption Position Feedback High-resolution internal sensor Accuracy ±0.5% of span Stroke Range 3–100 mm (linear), 30–120° (rotary) Operating Temperature -40°C to +85°C (-40°F to +185°F) Enclosure Protection IP65 / NEMA 4X Material Die-cast aluminum housing Weight 2 kg Certifications CE, CSA, ATEX, IECEx Diagnostics Built-in self-check, valve signature, travel history Key Features & Advantages Smart diagnostics with valve signature, travel history, and predictive maintenance Supports both linear and rotary valve actuators Rugged IP65/NEMA 4X housing suitable for harsh environments Energy-efficient design with minimal air consumption Compatible with HART-enabled control systems and optional Fieldbus/Profibus Applications The Honeywell SPS5710 (51199929-100) is ideal for: Refining and petrochemical process control Chemical manufacturing facilities Power generation plants Industrial systems requiring precise valve actuation and monitoring FAQ Q: Can this smart positioner work with non-Honeywell systems?A: Yes, it integrates with other DCS or PLC systems via HART or optional Fieldbus/Profibus protocols. Q: What type of valves are supported?A: Both linear and rotary actuators are compatible with the SPS5710. Q: Does it provide diagnostic data?A: Yes, it includes valve signature, travel history, and predictive maintenance features. Q: What is the required air supply?A: The positioner operates on 1.4–7 bar (20–100 psi) pneumatic supply.
$200.00 $100.00
-
Honeywell Honeywell 51454832-100 UEA Processor Module
Product Description The Honeywell 51454832-100 is a UEA processor module designed for legacy Honeywell distributed control systems, including TDC 3000 and Experion LCN platforms. Serving as the central CPU, it executes application logic, manages I/O communications, and coordinates system operations to ensure continuous, reliable performance in mission-critical environments. Built for industrial-grade durability, this module supports 24/7 operation under harsh conditions, providing long-term uptime for refineries, chemical plants, power generation facilities, and other continuous process industries. Technical Specifications Specification Details Part Number 51454832-100 Module Type UEA Processor Module Dimensions 420.5 × 140 × 90 mm Weight 1.5 kg Operating Voltage 24 VDC Mounting Rack-mounted in UEA chassis Operating Environment Industrial-grade, continuous operation Certifications CE, TÜV, UL508, CSA Key Features & Advantages Central processing unit for Honeywell UEA architecture Reliable 24/7 operation in harsh industrial conditions Seamless integration with TDC 3000 and Experion LCN systems Complies with CE, UL, CSA, and TÜV standards Optimized for high availability and long-term uptime in critical processes Applications The Honeywell 51454832-100 is suitable for: Refineries and petrochemical plants Power generation stations Continuous process chemical plants Legacy DCS applications requiring reliable CPU performance FAQ Q: Is this module compatible with Experion PKS Series-C systems?A: No, it is designed specifically for legacy TDC 3000 and Experion LCN platforms. Q: Can the module operate continuously in harsh industrial environments?A: Yes, it is engineered for continuous 24/7 operation under industrial conditions. Q: Where can this module be procured?A: Primarily available through surplus suppliers or specialized distributors.
$200.00 $100.00
-
Honeywell Honeywell LG1093AC01 UV Flame Detector
Product Description The Honeywell LG1093AC01 is an industrial-grade ultraviolet (UV) flame detector designed to monitor hydrocarbon combustion in boilers, furnaces, and gas turbines. Utilizing a Geiger-Müller phototube, it provides rapid detection of UV radiation emitted by flames, ensuring reliable flame verification and triggering alarms or shutdowns in unsafe conditions. Its robust stainless steel construction and solar-blind UV sensitivity make it suitable for harsh and hazardous industrial environments. Technical Specifications Specification Details Manufacturer Honeywell Model LG1093AC01 Type Ultraviolet (UV) Flame Detector Detection Technology Geiger-Müller Phototube Spectral Response 180–260 nm (solar-blind UV range) Response Time Flame detect: ~0.1 s; Flame loss detect: ~0.2 s Operating Temperature -40°C to +177°C (-40°F to +350°F) Pressure Rating Up to 400 psig at 150°F; 300 psig at higher temperatures Cable Length 12.8 m (42 ft), shielded Teflon Output Signal Frequency output ≈275 Hz ±25 Hz or 4–20 mA DC loop Power Supply Supplied via amplifier, typically 260–350 VDC Housing Material Stainless steel, corrosion-resistant Mounting Interface ¾-inch NPT internal thread Certifications CE, CSA, ATEX, FM explosion-proof Key Features Ultra-fast flame detection under 0.1 seconds Solar-blind UV sensor reduces false triggers from sunlight or hot surfaces Durable stainless steel housing with EMI-shielded cable High reliability for continuous industrial operation Certified for hazardous locations with ATEX and FM approvals Applications Designed for industrial combustion monitoring, including boilers, furnaces, gas turbines, and power generation plants. It ensures safe operation by verifying flame presence, triggering alarms, or initiating shutdowns during flame loss, ideal for petrochemical plants and other high-risk industrial environments. FAQ Q: What types of flames can the LG1093AC01 detect?A: It detects hydrocarbon flames emitting ultraviolet radiation within 180–260 nm. Q: Is this sensor suitable for explosive atmospheres?A: Yes, it is ATEX and FM certified for use in hazardous locations. Q: What is the maximum cable length for installation?A: The detector comes with a 12.8 m (42 ft) shielded Teflon cable, suitable for industrial applications.
$200.00 $100.00
-
Honeywell Honeywell LG1093AA25 UV Flame Sensor
Product Description The Honeywell LG1093AA25 is an advanced ultraviolet (UV) flame sensor designed for reliable monitoring of hydrocarbon flames in industrial combustion systems. Ideal for boilers, furnaces, and gas turbines, it provides rapid flame detection using a Geiger-Müller phototube, ensuring safe and efficient combustion control in demanding environments. Its durable stainless steel housing and solar-blind UV detection prevent false alarms, making it suitable for hazardous industrial applications. Technical Specifications Specification Details Manufacturer Honeywell Model LG1093AA25 Type Ultraviolet (UV) Flame Sensor Detection Technology Geiger-Müller Phototube Spectral Response 180–260 nm (solar-blind UV range) Response Time Flame detect: ~0.1 s (max 1.0 s), Flame loss detect: ~0.2 s Operating Temperature -40°C to +177°C (-40°F to +350°F) Pressure Rating Up to 400 psig at 150°F; 300 psig at higher temperatures Cable Length 12.8 m (42 ft), Teflon-shielded Output Signal Frequency output 275 s⁻¹ ±25 s⁻¹ or 4–20 mA DC loop Power Supply Provided by amplifier, typically 260–350 VDC Housing Material Stainless steel 1.4571, corrosion-resistant Mounting Interface ¾‑inch NPT internal thread Key Features Ultra-fast flame detection within 0.1 seconds High sensitivity to hydrocarbon flames under industrial conditions Solar-blind UV range reduces false triggers from sunlight or hot surfaces Robust stainless steel housing with EMI-shielded cable Flexible integration with Honeywell amplifiers and combustion control systems Certified for use in hazardous locations (ATEX, FM approvals) Applications Designed for industrial combustion systems including boilers, furnaces, and gas turbines. Enables operators to verify flame presence, maintain safe operations, and prevent unsafe combustion conditions. Suitable for power generation plants, process industries, and chemical facilities where reliable flame detection is critical. FAQ Q: What types of flames can this sensor detect?A: The LG1093AA25 detects hydrocarbon flames emitting UV radiation within 180–260 nm. Q: Can it operate in explosive atmospheres?A: Yes, it holds ATEX and FM explosion-proof certifications for hazardous locations. Q: What is the maximum cable length supported?A: It comes with a 12.8 m (42 ft) Teflon-shielded cable suitable for industrial installations.
$200.00 $100.00
-
Honeywell Honeywell 04230-A-1001 Hand Held Interrogator
Product Description The Honeywell 04230-A-1001 is a portable hand-held diagnostic device engineered for field operation with Honeywell gas detectors including Searchline Excel, Searchpoint Optima, and Optima Plus. ATEX-certified for use in hazardous environments, this tool allows technicians to perform calibration, configuration, and maintenance without interrupting detector operation. Its compact and rugged design ensures reliable performance in challenging industrial conditions. Technical Specifications Specification Details Manufacturer Honeywell Model 04230-A-1001 Type Hand Held Interrogator (Portable Diagnostic Tool) Compatible Detectors Searchline Excel, Searchpoint Optima, Optima Plus Certification ATEX, CE, TÜV, UL508, CSA Software Version 4V0 Material Stainless Steel ANSI 316 Dimensions 10.8 cm × 6.7 cm × 8.4 cm Weight 0.5 kg Operating Temperature 0°C to +40°C (DMT evaluated: -25°C to +55°C) Storage Temperature -10°C to +40°C Operating Humidity 0–99% RH Power Supply Internal Rechargeable Battery Interface Direct cable connection to detectors Key Features Rugged and portable design for on-site diagnostics in hazardous areas ATEX-certified for explosive atmospheres Multi-detector compatibility: supports Searchline Excel and Searchpoint Optima series Calibration, configuration, and parameter adjustment in the field Diagnostic capability: read status, fault codes, and detector performance data Compact, user-friendly interface for rapid deployment Applications Ideal for petrochemical plants, refineries, offshore platforms, and other industrial sites where continuous gas monitoring is critical. Enables maintenance teams to quickly assess detector health, optimize performance, and reduce downtime. FAQ Q: Can this device perform calibration on all Optima models?A: Yes, it is compatible with Optima, Optima Plus, and Searchline Excel detectors. Q: Is it safe to use in explosive atmospheres?A: Yes, it is ATEX-certified for hazardous areas. Q: What is the battery runtime?A: The internal rechargeable battery supports full-day field operations under standard usage conditions.
$200.00 $100.00
-
Honeywell Honeywell 51454192-150 Control Processor Module
Overview The Honeywell 51454192-150 is a high-performance Control Processor Module (CPM) designed for integration into Honeywell Experion PKS and TDC 3000 distributed control systems. It delivers real-time execution of process control strategies, manages communication with I/O modules, and supports redundant configurations to ensure continuous operation in mission-critical industrial applications. Technical Specifications Specification Details Manufacturer Honeywell Model / Part Number 51454192-150 System Compatibility Experion PKS, TDC 3000 Processor Type Industrial-grade CPU optimized for real-time control Memory Integrated RAM and non-volatile memory for process strategies and data retention Communication Interfaces with I/O modules, controllers, and networked system devices Redundancy Supports dual/redundant configurations for high availability Power Supply 24 VDC Dimensions Standard rack-mounted module footprint Weight 0.5 kg Operating Temperature 0°C to +60°C Storage Temperature -40°C to +85°C Key Features High-performance processing for complex control strategies Redundancy support to minimize system downtime Seamless integration with Experion PKS and TDC 3000 racks Durable design for continuous operation in harsh industrial environments Retains critical process data during power interruptions Application Scenarios Ideal for process control in petrochemical plants, energy production facilities, and large-scale manufacturing systems. Suitable for applications where continuous real-time control and high system availability are required. FAQ Q: Is this CPM compatible with both Experion PKS and TDC 3000?A: Yes, it is fully compatible with both systems for control and communication tasks. Q: Does it support redundant configurations?A: Yes, the module supports redundancy to ensure high availability and fault tolerance. Q: What types of communication interfaces are available?A: It connects with I/O modules, system controllers, and networked devices for real-time data exchange. Q: How is data retained during power interruptions?A: Integrated non-volatile memory preserves critical process control data even during power loss.
$200.00 $100.00
-
Honeywell Honeywell 05704-A-0144 Four-Channel Catalytic Input Control Card
Overview The Honeywell 05704-A-0144 is a high-precision four-channel control input card engineered for catalytic combustion gas monitoring. It converts low-level analog signals from catalytic gas sensors into reliable outputs suitable for DCS and PLC systems. Built for demanding industrial environments, this module ensures fast, accurate gas detection and robust operational reliability. Technical Specifications Specification Details Manufacturer Honeywell Model / Part Number 05704-A-0144 Input Channels 4 Sensor Compatibility Catalytic combustion gas sensors, thermocouples, pressure sensors, flame detectors Input Type Low-level analog signals Output Type Processed analog/digital signals for DCS/PLC Power Supply 24 VDC ±10% Power Consumption 8.5 W typical, 12.8 W maximum (200 mA sensor current) Response Time <100 ms Maximum Drive Voltage 10 V Drive Mode Constant current, electronically adjustable 90–315 mA in 1 mA increments Initial Accuracy ±1% Signal Adjustment Electronic bridge balance and signal gain adjustment Fault Detection Open circuit, short circuit, single bead failure Maximum Line Resistance 40 Ω (including sensor) Bridge Imbalance Limit ±100 mV from center at 2 V bridge voltage Isolation Channel-to-channel and channel-to-ground isolation Operating Temperature -40°C to +80°C Protection Rating IP65 (dustproof and water-resistant) Dimensions 122 × 52 × 132 mm Weight 0.14 kg Key Features High reliability in harsh industrial conditions Fast, real-time signal processing (<100 ms) Strong EMI/RFI interference resistance Versatile input compatibility for multiple sensor types Safety-focused design with accurate alarm triggering Application Scenarios Ideal for industrial safety monitoring in petrochemical plants, chemical processing, natural gas facilities, and energy production environments. Provides precise, real-time monitoring for hazardous gas detection and automated control. FAQ Q: Can this module handle multiple types of gas sensors?A: Yes, it supports catalytic combustion gas sensors, thermocouples, pressure sensors, and flame detectors. Q: What safety protections are included?A: The card includes open-circuit, short-circuit, and single-bead failure detection, ensuring fail-safe operation. Q: How fast is the response time?A: The module operates with a response time under 100 milliseconds, suitable for real-time monitoring systems. Q: Is it compatible with PLC and DCS systems?A: Yes, outputs are designed for direct integration with distributed control systems and programmable logic controllers.
$200.00 $100.00
You have seen 24 out of 318 products