General Electric (GE) offers a comprehensive range of industrial automation products. Its portfolio includes PACSystems RX3i/RX7i, Genius I/O modules, Mark VIe controllers, and PLC systems. GE products ensure reliable operation, scalable automation, and long-term support for industrial applications worldwide.
General Electric
-
General Electric GE Fanuc IC693NIU004 Series 90-30 Ethernet Network Interface Unit
Product Description The IC693NIU004 is a high-performance Ethernet Network Interface Unit (NIU) designed for the GE Fanuc Series 90‑30 PLC family. It functions as an Ethernet Global Data (EGD) station, enabling fast, reliable data transfer between PLCs and remote I/O modules over standard Ethernet networks. Equipped with multiple Ethernet ports, built-in diagnostics, and support for key industrial protocols, the module allows flexible integration into distributed control and automation systems. Key Features Functions as an EGD station for high-speed PLC-to-I/O communication Supports remote I/O expansion and acts as the head of distributed I/O racks Two to three RJ‑45 Ethernet ports (10/100 Mbps, auto-sensing) depending on revision RS‑232 Station Manager port for diagnostics and configuration Eight front-panel LEDs provide status for power, Ethernet link/activity, and module health Ethernet Restart pushbutton for LED testing and interface reboot Supports SRTP, EGD, TCP/IP, UDP/IP, Modbus TCP/IP protocols (revision-dependent) Single-slot installation, powered directly from the Series 90‑30 backplane Technical Specifications Communication Interfaces Ethernet Ports: 2–3 RJ‑45 (10/100 Mbps, auto-sensing) Protocol Support: SRTP, EGD, TCP/IP, UDP/IP, Modbus TCP/IP RS‑232: RJ‑11 Station Manager port Memory & Capacity Discrete Inputs (%I): Up to 2048 points Discrete Outputs (%Q): Up to 2048 points Analog Inputs (%AI): Up to 1268 words Analog Outputs (%AQ): Up to 512 words Internal Coils (%M): 4096 bits (fixed) Temporary Coils (%T): 256 bits Power & Installation Power Source: Supplied via Series 90‑30 backplane Logic Engine Consumption: ~7.4 W Slot Requirement: Single slot, typically installed in slot 1 Mechanical & Environmental Dimensions: 210 × 188 × 262 mm (varies slightly by revision) Weight: 1.76 lbs Environment: Industrial-grade, suitable for harsh conditions Application Scenarios High-speed distributed I/O systems in large industrial facilities Machine automation requiring Ethernet Global Data communication Process control systems with remote monitoring and data acquisition SCADA integration for geographically dispersed assets FAQ Q: How many Ethernet ports does the IC693NIU004 provide?A: Depending on the revision, the module has two or three RJ‑45 Ethernet ports supporting 10/100 Mbps auto-sensing. Q: What protocols are supported?A: Supported protocols include SRTP, EGD, TCP/IP, UDP/IP, and Modbus TCP/IP (revision-dependent). Q: Can it act as the head of a remote I/O rack?A: Yes, it supports remote I/O expansion and functions as the primary station for distributed I/O. Q: What is the memory capacity?A: Discrete inputs up to 2048 points, discrete outputs up to 2048 points, analog inputs up to 1268 words, analog outputs up to 512 words.
$200.00 $100.00
-
General Electric GE Fanuc IC693MDR390 Series 90-30 8-In/8-Out 24 VDC I/O Module
Product Description The IC693MDR390 is a combination discrete I/O module from GE Fanuc for the Series 90‑30 PLC platform, integrating 8 DC input channels and 8 relay output channels in a single compact unit. Designed for applications that require both sensing and switching, the module supports positive or negative logic for inputs and normally‑open relay outputs capable of switching AC or DC loads. Status LEDs provide real-time indication for all 16 points, while compatibility with 24 VDC field devices ensures versatile deployment across industrial automation systems. Key Features 8 DC inputs (single common) with positive/negative logic support 8 normally‑open relay outputs grouped in two sets of four Input range: –30 to +32 VDC; supports sourcing and sinking devices Relay output range: 5–30 VDC or 5–250 VAC, 2 A per output, 4 A per common Fast response: 7 ms input, 15 ms output typical LED indicators for each input and output point Installs in any I/O slot of 5‑ or 10‑slot Series 90‑30 baseplates Compact and lightweight design (~0.31 kg / 0.69 lb) Technical Specifications Input Specifications Rated Input Voltage: 24 VDC Input Voltage Range: –30 to +32 VDC Number of Inputs: 8 (single group) On-State Voltage: 15–32 VDC Off-State Voltage: 0–5 VDC On-State Current (min.): 4 mA Off-State Current (max.): 1.5 mA Input Response Time: 7 ms typical Output Specifications Number of Outputs: 8 relay outputs (N.O.) Output Voltage Range: 5–30 VDC; 5–250 VAC (50/60 Hz) Rated Output Voltage: 24 VDC / 120–240 VAC Maximum Load per Output: 2 A Maximum Load per Common: 4 A Output Response Time: 15 ms typical Power Consumption Backplane Current Draw: 80 mA (all I/O active) / 70 mA (all outputs energized) Mechanical & Environmental Dimensions: 146 × 102 × 38 mm (5.75 × 4.0 × 1.5 in) Weight: 0.66 lb Installation: Any I/O slot in 5‑ or 10‑slot baseplate Application Scenarios Compact control panels requiring both input sensing and relay output switching Machine automation with 24 VDC sensors and AC/DC load devices Control of solenoids, indicators, motor starters, and contactors via relay outputs Industrial systems where space-saving combined I/O modules are advantageous FAQ Q: Can the module handle both sourcing and sinking input devices?A: Yes, the inputs support positive or negative logic, making it compatible with sourcing or sinking 24 VDC devices. Q: What is the maximum load for each relay output?A: Each relay output can switch up to 2 A, with a maximum of 4 A per common. Q: How are input and output statuses indicated?A: Each input and output channel has an LED indicator that illuminates when active. Q: Are there alternative modules with higher I/O density?A: The IC693MDR392 offers 16 inputs and 16 relay outputs for applications requiring greater channel counts.
$200.00 $100.00
-
General Electric GE Fanuc IC693PWR324 Series 90-30 AC/DC 30W Power Supply Module
Product Description The IC693PWR324 by GE Fanuc is a 30‑Watt AC/DC power supply module designed for the Series 90‑30 PLC platform. It installs in the leftmost slot of the baseplate and delivers three regulated DC outputs to power CPUs, I/O modules, relay circuits, and internal electronics. With wide-range input compatibility, integrated protection features, and RS‑485 diagnostic support, this module ensures reliable PLC operation across diverse industrial environments. Key Features Wide-range input: 85–264 VAC (50/60 Hz) or 100–300 VDC Three independent DC outputs: +5 VDC for logic, +24 VDC for relays, and isolated +24 VDC for internal circuits Protection mechanisms: overvoltage, overcurrent, and short-circuit shutdown Holdup time ≥20 ms at full load to maintain system stability Detachable terminal block for simplified wiring Status LEDs: PWR, OK, RUN, BATT for quick visual monitoring RS‑485 communication for diagnostics and monitoring Fanless operation with compact design Technical Specifications Input Characteristics Nominal Input Voltage: 120/240 VAC or 125 VDC Input Voltage Range: 85–264 VAC / 100–300 VDC Input Power: 90 VA (AC) / 50 W (DC) Peak Inrush Current: 4 A, 250 ms maximum Output Specifications Output Channel Voltage Range Max Power Typical Use +5 VDC 5.0–5.2 VDC 15 W CPU & logic circuits +24 VDC (Relay) 24–28 VDC 15 W Relay modules +24 VDC (Isolated) 21.5–28 VDC 20 W Input modules / internal circuits Total Output Capacity — 30 W Module rating Protection & Performance Overvoltage: 5 VDC shuts down at 6.4–7 V Overcurrent: 5 VDC limited to 4 A max Short-Circuit: Automatic shutdown Holdup Time: ≥20 ms at full load Mechanical & Environmental Mounting: Leftmost slot of Series 90‑30 baseplate Operating Temperature: 0°C to 60°C Humidity: 5–95% non-condensing Dimensions: 3.6 × 13 × 13.5 cm Weight: 0.86 lbs Application Scenarios Supplying power to Series 90‑30 CPUs, I/O modules, and relay circuits Industrial automation systems requiring stable multi-rail DC outputs Systems needing wide-range AC/DC input compatibility without additional power conversion Applications where diagnostic monitoring via RS‑485 is essential FAQ Q: Can this module accept both AC and DC inputs simultaneously?A: The module supports AC or DC input, but each installation should use only one type at a time. Q: What protection features are included?A: Overvoltage, overcurrent, and short-circuit protection automatically safeguard connected equipment. Q: How does the module indicate operational status?A: Four LEDs display power (PWR), system health (OK), run status (RUN), and battery/auxiliary power (BATT). Q: Are there higher capacity alternatives for more demanding PLC loads?A: Yes, the IC693PWR332 provides higher output power while maintaining multi-rail regulation and wide AC/DC input support.
$200.00 $100.00
-
General Electric GE Fanuc IC693MDL241 Series 90-30 16-Point AC/DC Input Module
Product Description The IC693MDL241 by GE Fanuc is a versatile 16-point discrete input module designed for the Series 90‑30 PLC family. It accepts both 24 VAC and 24 VDC signals, supporting positive or negative logic for DC inputs. Each input is monitored via individual LED indicators, providing clear status feedback for all channels. The module is suitable for installation in any I/O slot of 5- or 10-slot baseplates and offers 1500 V isolation between field and logic sides, ensuring reliable operation in electrically noisy environments. Key Features Supports AC and DC input signals, including pushbuttons, limit switches, and proximity sensors Accepts positive or negative logic in DC mode 16 LED indicators display real-time ON/OFF status 1500 V RMS isolation between field and logic sides for electrical noise immunity Compatible with all Series 90‑30 I/O slots Operating temperature range: 0°C to 60°C Technical Specifications Electrical Input Characteristics Rated Voltage: 24 VAC / 24 VDC Input Voltage Range: 0–30 VAC / 0–30 VDC, 50/60 Hz Inputs per Module: 16 (single group) Typical Input Current: 7 mA at rated voltage On-State Voltage: 11.5–30 VAC/VDC Off-State Voltage: 0–4 VAC/VDC On-State Current (min.): 3.2 mA Off-State Current (max.): 1 mA Timing Characteristics Typical On Response Time: 12 ms Typical Off Response Time: 28 ms Power Consumption 5 V Backplane: 80 mA (all inputs ON) Isolated 24 V Backplane or External Supply: 125 mA Mechanical & Environmental Isolation: 1500 V RMS between field and logic sides Operating Temperature: 0°C to 60°C Weight: 0.68 lbs Application Scenarios Monitoring industrial control devices such as limit switches, pushbuttons, and proximity sensors Systems requiring both AC and DC input compatibility Automation panels where space-efficient, reliable I/O expansion is required FAQ Q: Can this module handle both AC and DC inputs simultaneously?A: Yes, it is compatible with either AC or DC signals, but each input point should only receive one type at a time. Q: What logic modes are supported?A: Positive or negative logic can be selected for DC operation. Q: How does the module indicate input status?A: Each of the 16 inputs has a dedicated LED that illuminates when the input is active. Q: Are there higher density input modules in the Series 90-30 family?A: The IC693MDL240 offers 32 input points for applications requiring more I/O channels.
$200.00 $100.00
-
General Electric GE Fanuc Series 90-30 IC693PWR322 Standard DC Power Supply Module
Product Description The IC693PWR322 from GE Fanuc is a robust 30‑Watt DC power supply specifically engineered for the Series 90‑30 PLC platform. It delivers stable, multi-rail DC power to CPU modules, I/O devices, relay loads, and communication modules. Designed for mounting in the leftmost slot of the rack, it ensures uninterrupted PLC operation even during short voltage dips and provides RS‑485 diagnostics for system monitoring. Key Features Converts 24 VDC or 48 VDC nominal input into three independent, regulated output rails Stable power distribution for logic circuits, sensors, and relay loads Minimum 14 ms holdup time to ride through brief power interruptions RS‑485 communication support for remote monitoring and diagnostics Fanless design for silent operation and minimal maintenance Compliant with UL, cUL, and CE standards Technical Specifications Electrical Specifications Nominal Input Voltage: 24 VDC / 48 VDC Input Voltage Range (Start): 21–56 VDC Input Voltage Range (Run): 18–56 VDC Input Power: 50 W (DC input) Peak Inrush Current: 4 A, 100 ms max Holdup Time: ≥14 ms at nominal input Output Specifications Output Channel Voltage Current Power Typical Application Output 1 +5 VDC 3 A 15 W CPU & Logic Power Output 2 +24 VDC 0.83 A 20 W Sensor Inputs (Isolated) Output 3 +24 VDC 0.63 A 15 W Relay Coils Total Output — — 30 W Overall Module Capacity Mechanical & Environmental Mounting: Leftmost slot of Series 90-30 baseplate Cooling: Natural convection (fanless) Operating Temperature: 0°C to 60°C Weight: 1.25 lbs Application Scenarios The IC693PWR322 is ideal for: Machine control panels requiring precise logic power Sensor-intensive PLC configurations Relay-heavy automation systems Any Series 90-30 PLC setup needing reliable, multi-rail DC power FAQ Q: Can the IC693PWR322 handle input voltages below 24 VDC?A: Yes, it supports a running range of 18–56 VDC while maintaining stable output. Q: Does it require a cooling fan?A: No, the module uses natural convection for thermal management. Q: How is system monitoring handled?A: RS‑485 communication allows diagnostic data retrieval and status monitoring. Q: Are there similar modules for higher load applications?A: The IC693PWR334 offers higher output capacity for more demanding PLC configurations.
$200.00 $100.00
-
General Electric GE IC694ALG222 RX3i 16-Channel Analog Voltage Input Module
Product Description The IC694ALG222 from GE Fanuc Emerson is a 16-channel analog voltage input module designed for the PACSystems RX3i and Series 90‑30 platforms. It supports either 16 single-ended channels or 8 differential channels, with each channel configurable for unipolar 0–10 V or bipolar –10 to +10 V ranges. This module is factory-calibrated for precision measurement, offers configurable high and low alarm limits, and provides robust optical isolation between field wiring and the backplane. Fast update rates, high input resolution, and reliable diagnostics make the IC694ALG222 suitable for process control, industrial monitoring, and automation applications where accuracy and uptime are critical. Key Features 16-channel analog voltage input with single-ended or differential configuration Configurable 0–10 V (unipolar) or –10 to +10 V (bipolar) ranges Factory-calibrated for high accuracy Configurable high/low alarm limits for process monitoring Optical isolation: 250 VAC continuous, 1500 VAC for 1 minute Fast channel update rates: 6 ms (single-ended), 3 ms (differential) Compact design suitable for any RX3i I/O slot External isolated 24 VDC supply required on Universal Backplane Technical Specifications Parameter Specification Channels 16 single-ended / 8 differential Voltage Input Range 0 to +10 V (unipolar), –10 to +10 V (bipolar) Resolution 2.5 mV/count (0–10 V), 5 mV/count (–10 to +10 V) Accuracy ±0.25% FS @ 25°C, ±0.5% FS over operating temperature Linearity <1 LSB Update Rate 6 ms (16 single-ended), 3 ms (8 differential) Input Impedance 500 kΩ (single-ended), 1 MΩ (differential) Input Filtering 41 Hz (single-ended), 82 Hz (differential) Isolation 250 VAC continuous, 1500 VAC for 1 minute Power Consumption 112 mA @ +5 VDC, 41 mA @ +24 VDC (isolated) Operating Temperature 0°C to +60°C Dimensions 263 × 58 × 28 mm Weight 0.43 kg Installation Fits any RX3i I/O slot; requires external 24 VDC on Universal Backplane Applications The IC694ALG222 is ideal for precision voltage monitoring and control in applications such as industrial automation, process monitoring, machine diagnostics, and energy management. Its high-density input capability allows efficient use of I/O slots while maintaining accurate measurements in noisy industrial environments. FAQ Q: Can this module handle both single-ended and differential wiring?A: Yes, channels can be individually configured as 16 single-ended or 8 differential inputs. Q: What voltage ranges are supported?A: Channels support 0–10 V unipolar or –10 to +10 V bipolar configurations. Q: Does it require an external power supply?A: Yes, when installed on a Universal Backplane, an isolated 24 VDC supply is required. Q: How fast are the channel update rates?A: Single-ended channels update in 6 ms, differential channels in 3 ms.
$200.00 $100.00
-
General Electric GE IC693MDL660 Series 90-30 32-Point 24VDC Discrete Input Module
Product Description The IC693MDL660 from GE Fanuc Emerson is a 32-point discrete DC input module designed for the Series 90‑30 PLC platform. Supporting both positive and negative logic, it allows connection of a wide variety of field devices, including pushbuttons, limit switches, proximity sensors, and photoelectric sensors. Inputs are organized into four groups of eight, with two commons per group to simplify wiring. The module provides 32 green LEDs for channel status and a red LED for terminal-block lock status. Its compact single-slot design, combined with robust 1500 VAC isolation, makes it ideal for high-density installations in manufacturing, utilities, logistics, and process control systems. Key Features High-density 32-point discrete input module Supports sourcing and sinking DC input devices (positive/negative logic) Fast response time suitable for high-speed automation Individual green LEDs for input monitoring, red LED for terminal-block lock 1500 VAC isolation between field inputs and logic side Compact single-slot module for efficient I/O expansion Compatible with standard Series 90‑30 I/O slots and terminal blocks (IC694TBB032 / IC694TBS032) Technical Specifications Parameter Specification Input Points 32 Input Voltage 24 VDC nominal, 0–30 VDC range Logic Type Positive or negative Input Current ~7.0 mA at 24–30 VDC On-State Voltage ≥ 15 VDC Off-State Voltage ≤ 6 VDC On-State Current ≥ 4.5 mA Off-State Current ≤ 2.0 mA Response Time On/Off ≤ 2 ms Input Grouping 4 groups of 8 points, 2 commons per group Isolation 1500 VAC (field side to logic side) Indicators 32 green LEDs for channel status, 1 red LED for terminal-block lock Dimensions 128 × 55 × 105 mm Weight 0.99 lbs Operating Temperature 0°C to 60°C Storage Temperature –40°C to +85°C Humidity 5–95% non-condensing Installation Fits any Series 90‑30 I/O slot, requires compatible terminal block Applications The IC693MDL660 is well-suited for industrial environments requiring dense discrete signal capture, such as automated manufacturing lines, process control systems, utility monitoring, and logistics automation. FAQ Q: Can this module handle both sourcing and sinking devices?A: Yes, it supports both positive and negative logic DC input wiring. Q: How fast is the response time?A: Typical on/off response is under 2 milliseconds, making it suitable for high-speed control applications. Q: Which terminal blocks are compatible?A: Use IC694TBB032 or IC694TBS032 (sold separately) for proper wiring.
$200.00 $100.00
-
General Electric GE IC694ALG233 RX3i 16-Channel Analog Current Input Module
Product Description The IC694ALG233 by GE (Emerson Automation) is a 16-channel high-density analog current input module for the PACSystems RX3i platform. It is engineered for precision measurement in demanding industrial applications, supporting sensors that monitor flow, pressure, temperature, and other process variables. Each channel can be configured for 0–20 mA, 4–20 mA, or 4–20 mA Enhanced mode for superior flexibility and accuracy. The module offers 16-bit resolution, advanced diagnostics, open-wire detection in Enhanced mode, and full software configurability without jumpers. It supports hot-swap for minimal downtime and provides detailed status reporting to the CPU, including module and power-supply health. Key Features 16 high-density analog current input channels Supports 0–20 mA, 4–20 mA, and 4–20 mA Enhanced ranges 16-bit resolution for precise signal acquisition Enhanced diagnostics including open-wire detection Hot-swap capability for continuous operation Configurable scaling, offset, and fault reporting Reports module and external power-supply status to CPU Robust 250 VAC isolation between field inputs and backplane Technical Specifications Parameter Specification Input Channels 16 single-ended channels Input Current Ranges 0–20 mA, 4–20 mA, 4–20 mA Enhanced Resolution 16-bit Update Time 6 ms for all channels (Emerson spec), 10 ms scan (other vendor spec) Accuracy ±0.05% full scale Diagnostics High/low alarms, open-wire detection in Enhanced mode, module and power-supply reporting Isolation 250 VAC continuous (field to backplane) Power Requirements +5 VDC @ 120 mA, +24 VDC external 65–300 mA Operating Temperature 0°C to 60°C Storage Temperature –40°C to 100°C Humidity 5–95% non-condensing Dimensions 136 × 35 × 133 mm Weight 0.5 kg Installation Fits any RX3i I/O slot, hot-swap supported Compatibility RX3i backplanes (e.g., IC694CHS790), configured via Proficy Machine Edition Applications The IC694ALG233 is ideal for industrial systems requiring high-precision analog current measurement. Typical use cases include process control for flow, pressure, and temperature monitoring in manufacturing plants, energy systems, and chemical processing facilities. FAQ Q: Can each channel be independently configured?A: Yes, each of the 16 channels can be set for 0–20 mA, 4–20 mA, or 4–20 mA Enhanced mode. Q: Does the module support hot-swap?A: Yes, it can be inserted or removed while the system is powered without disrupting operation. Q: What diagnostics are available?A: Supports high/low alarms, open-wire detection, and reports module and external power-supply status to the CPU.
$200.00 $100.00
-
General Electric GE IC695CMU310 RX3i Max-ON Hot-Standby Redundancy CPU Module
Product Description The IC695CMU310 by GE (Emerson Automation) is a Max‑ON hot-standby redundancy CPU designed for the PACSystems RX3i platform. It enables two RX3i systems to operate in a synchronized primary/backup configuration, delivering high-availability control for critical industrial processes. In the event of a primary CPU failure, the backup takes over within 2–3 CPU scans, preserving I/O states and maintaining continuous operation. This module is widely applied in mission-critical environments such as power generation, boiler control, fuel loading, and manufacturing systems where downtime must be minimized. Key Features Hot-standby redundancy with sub-millisecond failover Maintains I/O states during CPU switchover 300 MHz Intel Celeron CPU architecture Large user memory: 10 MB battery-backed RAM, 10 MB optional flash Dual isolated serial ports supporting Modbus RTU, SNP, and Serial I/O Compatible with multiple IEC 61131‑3 programming languages including Ladder, Structured Text, Function Block, and C In-system firmware upgradeable Single-slot design with dual backplane support Technical Specifications Parameter Specification Processor 300 MHz Intel Celeron architecture Boolean Execution Speed 0.195 ms per 1000 Boolean instructions (typical) Failover Time 2–3 CPU scans (<1 ms typical) User Memory 10 MB battery-backed RAM Non-Volatile Memory 10 MB optional flash Reference Table Sizes %I / %Q: 32 Kbits, %AI / %AQ: up to 32 Kwords each, %W: up to available RAM Program Blocks Up to 512 blocks, max 128 KB each Communication Ports 1 × RS‑232, 1 × RS‑485, isolated Supported Protocols Modbus RTU Slave, SNP, Serial I/O Redundancy Communication Dedicated Ethernet LANs (requires IC695ETM001) Power Supply +5 VDC @ 1.0 A, +3.3 VDC @ 1.25 A Operating Temperature 0°C to 60°C Storage Temperature –40°C to +70°C Clock Drift Max 2 seconds per day Slot Width Single-slot module Dimensions 140 × 130 × 45 mm Weight 0.88lbs Compatible Backplanes RX3i Universal Backplane (IC695CHS0xx), Series 90‑30 expansion backplanes Battery Options IC695ACC302, IC693ACC302, IC698ACC701 Applications The IC695CMU310 is ideal for continuous-process and mission-critical control systems requiring zero downtime. Common use cases include power plants, fuel handling systems, boiler automation, and high-reliability manufacturing lines where hot-standby redundancy is essential. FAQ Q: How quickly does the backup CPU take over if the primary fails?A: Failover occurs within 2–3 CPU logic scans, typically under 1 millisecond. Q: What programming languages are supported?A: Ladder Diagram, Structured Text, Function Block Diagram, and C. Q: Can this CPU operate in a single-slot backplane?A: Yes, the IC695CMU310 is a single-slot module compatible with RX3i universal and expansion backplanes.
$200.00 $100.00
-
General Electric GE IC694MDL241 RX3i 16-Point Discrete Input Module
Product Description The IC694MDL241 by GE (Emerson Automation) is a 16-point discrete input module designed for the PACSystems RX3i platform. It accommodates both AC and DC field signals and supports positive or negative logic in DC mode. This module is compatible with a broad range of industrial input devices including pushbuttons, limit switches, and proximity sensors. Sixteen dedicated green LEDs provide clear, real-time status indication for each input channel. The module features optical isolation between field inputs and the backplane, ensuring reliable operation in electrically noisy industrial environments. Installation is flexible, fitting any RX3i I/O slot, and supports hot-swappable insertion and removal without powering down the system. Key Features 16-point discrete AC/DC input flexibility Positive and negative logic support in DC mode Optical isolation for robust industrial noise immunity Individual channel status indicators (green LEDs) Hot-swappable in RX3i I/O slots Compatible with a wide range of industrial sensors and switches Technical Specifications Parameter Specification Rated Voltage 24 VAC or 24 VDC Input Voltage Range 0–30 VAC/DC, 50/60 Hz Number of Inputs 16 points (single group with common terminal) Logic Type Positive or Negative (DC mode) On-State Voltage 11.5–30 VAC/DC Off-State Voltage 0–4 VAC/DC On-State Current ≥ 3.2 mA Off-State Current ≤ 1 mA On Response Time ~12 ms Off Response Time ~28 ms Isolation Field to Backplane: 250 VAC continuous, 1500 VAC for 1 minute (optical) Power Consumption 5 V Bus: 80 mA (all inputs ON), 24 V Bus: 125 mA Indicators 16 green LEDs (ON/OFF status per channel) Dimensions 34 × 145 × 140 mm Weight 0.53 lbs Installation Any RX3i I/O slot, hot-swappable Operating Humidity 0–80% non-condensing Storage Humidity 0–80% non-condensing Installation Altitude ≤1000 m above sea level Applications The IC694MDL241 is ideal for industrial process monitoring and control systems, including manufacturing automation, energy management, and machine operation. It reliably interfaces with pushbuttons, limit switches, proximity sensors, and other common field devices, providing accurate and responsive input monitoring. FAQ Q: Can this module handle both AC and DC inputs?A: Yes, it supports 24 VAC and 24 VDC inputs, with positive or negative logic in DC mode. Q: Does it provide visual indication for each channel?A: Yes, 16 green LEDs indicate the ON/OFF status of each input channel. Q: Can it be replaced or installed while the system is powered?A: Yes, the module supports hot-swapping in RX3i I/O slots.
$200.00 $100.00
-
General Electric GE IC695ALG704 RX3i 4-Channel Non-Isolated Analog Output Module
Product Description The IC695ALG704 by GE (Emerson Automation) is a high-performance, 4-channel analog output module designed for the PACSystems RX3i platform. This module delivers precise voltage and current signals for controlling industrial actuators such as valves, dampers, and motor drives, supporting dynamic process environments with rapid updates and software-configurable ranges. Key Features Four independent, non-isolated analog output channels Configurable voltage and current output ranges without hardware jumpers High-resolution outputs for precise control: up to 16-bit for voltage, ~15.9-bit for current Fast channel update rate of 8 milliseconds for dynamic processes Integrated diagnostics and alarms to monitor module performance Designed for harsh industrial environments with temperature range –20°C to +70°C Technical Specifications Parameter Specification Channels 4 analog outputs (non-isolated) Output Voltage 0–10 V, ±10 V Output Current 0–20 mA, 4–20 mA Resolution 0–10 V: 14.9-bit, ±10 V: 15.9-bit, 0–20 mA: 15.9-bit, 4–20 mA: 15.6-bit Update Rate 8 ms per channel Output Load Voltage: ≤2 kΩ, Current: ≤850 Ω Power Supply +3.3 VDC @ 375 mA, +24 VDC @ 160 mA Accuracy ±0.15% FS @ 25°C, ±0.30% FS @ 60°C Output Protection -30 V for 60 s, +30 V for 1 hr Settling Time 2 ms (0–95% output) Operating Environment Temperature: –20°C to +70°C, Humidity: 5–95% non-condensing Dimensions 118 × 72 × 35 mm Weight 300 g Compatibility PACSystems RX3i, CPU v3.0+, terminal blocks IC694TBB032 & IC694TBS032 Applications The IC695ALG704 is ideal for process control, manufacturing automation, energy systems, and any industrial setting requiring rapid, high-precision analog signal generation. It supports fast-acting valves, motors, and dampers, enabling smooth and accurate control in complex automation setups. FAQ Q: Can this module handle both current and voltage outputs simultaneously?A: Each channel can be configured individually for either voltage or current output. Q: Is isolation required for installation?A: This module is non-isolated; ensure system-level isolation if required. Q: Are software updates needed for compatibility?A: Ensure the RX3i CPU is version 3.0 or higher for full compatibility.
$200.00 $100.00
-
General Electric GE Fanuc IC693PWR331 Series 90-30 24VDC High-Capacity Power Supply
Product Description The IC693PWR331 is a high-capacity 24 VDC power supply engineered for the GE Fanuc Series 90‑30 PLC system. Designed for applications demanding higher +5 V current than standard supplies, this module provides three independent, fully regulated outputs: +5 VDC, +24 VDC relay, and isolated +24 VDC, delivering a combined maximum of 30 W. The module fits into the leftmost slot of the Series 90‑30 baseplate and supports a wide input range from 2–30 VDC, with startup ensured above 8 VDC. Integrated overcurrent and overvoltage protection safeguard connected modules, while front-panel LEDs indicate power and operational status. An RS‑485-compatible port and battery connectors facilitate system monitoring and backup integration. Technical Specifications Input Power Nominal Voltage: 24 VDC Input Range: 2–30 VDC Startup Voltage: ≥8 VDC Max Input Power: 50 W Output Power +5 VDC: Up to 30 W for main logic supply +24 VDC Relay: Up to 5 W for relay coils +24 VDC Isolated: Up to 20 W for external modules Total Output: 30 W max Voltage Ranges: +5 VDC (5.0–5.2 V), +24 VDC Relay/Isolated (9.2–28.8 V) Protection Features Overvoltage protection (+5 VDC trips at 6.4–7 V) Overcurrent protection (7 A max on +5 VDC) Short-circuit current limiting and automatic shutdown No holdup time; module does not provide ride-through Mechanical & Installation Mounting: Leftmost slot of Series 90‑30 baseplate Backplane Connector: 48‑pin Front Panel: PWR OK, RUN, BATT LEDs, RS‑485 port, battery connectors Dimensions: Standard Series 90‑30 power supply form factor Environmental Ratings Operating Temperature: Derating required above 50 °C Standards: Refer to GE datasheet GFK‑0867B for UL/CE compliance Key Features 30 W total regulated output with flexible allocation Wide input range: 2–30 VDC with 8 V startup Three independent outputs for +5 V, +24 V relay, and isolated +24 V Electronic overcurrent and overvoltage protection Front-panel status LEDs and RS‑485 connectivity Applications Ideal for Series 90‑30 PLC systems in industrial automation environments requiring stable logic supply, relay operation, or isolated module power. FAQ Q: Can the entire 30 W output be used on +5 VDC?A: Yes, the module can allocate the full 30 W output to the +5 V bus if required. Q: Does this module provide ride-through on power loss?A: No, the IC693PWR331 does not provide holdup or ride-through capability. Q: What protection features are included?A: Overvoltage, overcurrent, and short-circuit protection are built-in.
$200.00 $100.00
-
General Electric GE Fanuc IC693PCM311 Series 90-30 Programmable Coprocessor Module
Product Description The IC693PCM311 is a high-performance Programmable Coprocessor Module (PCM) for the GE Fanuc Series 90‑30 PLC family. It enhances the main CPU by handling complex logic, serial communications, and specialized data processing, freeing the primary processor for core automation tasks. Equipped with 640 KB of onboard memory, including 190 KB dedicated to MegaBasic programs, this module also supports C programming for custom applications. Two independent serial ports provide flexible connectivity for Modbus RTU, GE Fanuc CCM, ASCII, and user-defined serial protocols, with port activity indicated via dedicated LEDs. Battery-backed RAM ensures program retention during power interruptions. Technical Specifications Memory Total Onboard Memory: 640 KB MegaBasic Program Memory: 190 KB Battery-Backed RAM: Yes (uses IC693ACC301 lithium battery) Communication Ports Two serial ports (RS‑232 / RS‑422/485 via appropriate cable) Front-panel access with activity LEDs for Port 1 and Port 2 Supports baud rates up to 115.2 kbps depending on configuration Compatible with Modbus RTU, CCM, ASCII, and custom serial protocols Programming Support MegaBasic C Language Independent operation from main CPU RUN/PROGRAM mode selectable via pushbutton Power Requirements Backplane Power Draw: 400–600 mA @ 5 VDC (depending on configuration) Installation Requirements Mount in CPU baseplate only; slot 1 reserved for CPU Not compatible with expansion or remote racks Requires IC693CBL305 or equivalent for port breakout Indicators & Controls OK LED for module health US1/US2 LEDs for port activity Restart pushbutton for RUN/PROGRAM mode selection Mechanical Dimensions: 140 × 140 × 35 mm Weight: 0.99 lbs Environmental Ratings Operating Temperature: 0 °C to 60 °C Storage Temperature: –40 °C to +85 °C Humidity: 5–95% non-condensing Key Features 640 KB onboard memory with 190 KB MegaBasic space Dual serial ports with LED activity indicators Supports Modbus RTU, GE Fanuc CCM, ASCII, and custom protocols C and MegaBasic programming capability Battery-backed RAM for program retention Ideal for offloading complex logic and serial communication from the main CPU Applications Suitable for data acquisition, custom algorithm execution, serial device integration, RTU master applications, and high-level communication tasks in Series 90‑30 PLC systems. FAQ Q: Can this module operate in an expansion rack?A: No, IC693PCM311 must be installed in a CPU baseplate slot (not slot 1). Q: What serial protocols are supported?A: Modbus RTU, GE Fanuc CCM, ASCII, and user-defined protocols. Q: How is program retention handled?A: Battery-backed RAM (IC693ACC301) ensures memory retention during power loss.
$200.00 $100.00
-
General Electric GE Fanuc IC694MDL752 RX3i 32-Point Negative Logic Output Module
Product Description The IC694MDL752 is a high-density 32-point DC output module for the PACSystems RX3i series, designed for precise, high-speed discrete control applications. This negative-logic (sinking) module supports TTL 5 V loads for low-power electronics as well as 12/24 V industrial loads such as relays, solenoids, lamps, and valves. The module organizes outputs into four isolated groups of eight points, each with its own common, allowing mixed-voltage operation on the same module. Optical isolation and internal pull-up resistors enhance noise immunity and signal reliability. Each point features an individual LED for real-time status indication. Technical Specifications Output Characteristics Number of Outputs: 32 points (4 groups × 8) Output Type: Negative logic (active-low, sinking) Voltage Range: TTL Mode 4.75–5.25 VDC; 12/24 V Mode 10.2–28.8 VDC Maximum Current per Point: TTL 25 mA; 12/24 V 0.5 A Maximum Current per Group: 4 A total; 3 A per common pin (two pins per group) Internal Pull-up Resistor: Yes, active in TTL mode Isolation Ratings Field to Backplane: 250 VAC continuous; 1500 VAC for 1 minute (optical) Group to Group: 50 VAC continuous; 500 VAC for 1 minute Power Requirements Backplane Power Draw: 260 mA @ 5 VDC max User Load Power: External 5 V, 12 V, or 24 V supply required depending on mode Mechanical & Installation Dimensions: 34 × 145 × 140 mm Mounting: RX3i I/O slots, any position Terminal Blocks: Compatible with IC694TBB032 / IC694TBS032 Status Indicators: 32 individual LEDs Performance Maximum Response Time: 0.5 ms On-State Voltage Drop: TTL Mode 0.4 V max; 12/24 V Mode 0.24 V max Off-State Leakage Current: 0.1 mA max Environmental Ratings Operating Temperature: 0 °C to 60 °C Key Features 32-point negative logic DC output with four isolated groups Supports TTL (5 V) and 12/24 V industrial loads simultaneously Individual LEDs for each output point Optically isolated outputs for enhanced noise immunity Compact, high-density design for RX3i PLC racks Fast 0.5 ms response time for high-speed control applications Applications Ideal for discrete control of relays, solenoids, lamps, valves, and other mixed-voltage industrial devices in manufacturing, process automation, and distributed control systems. FAQ Q: Can this module drive mixed voltage loads simultaneously?A: Yes, each group can be configured for TTL or 12/24 VDC independently. Q: What is the maximum current per output?A: TTL mode: 25 mA per point; 12/24 V mode: 0.5 A per point. Q: Are the outputs isolated?A: Yes, each group is optically isolated, and field-to-backplane isolation is rated 250 VAC continuous.
$200.00 $100.00
-
General Electric GE Fanuc IC697PWR724 Series 90-70 24VDC Power Supply
Product Description The IC697PWR724 is a rack-mounted 24 VDC power supply tailored for GE Fanuc Series 90‑70 PLC systems. Designed for installation in the leftmost slot of the PLC rack, it provides regulated DC power and logic-level sequencing signals to all connected modules. With a total output of 90 W, the IC697PWR724 can support a single rack or two interconnected racks using the IC697CBL700 cable, provided the combined load does not exceed its rated capacity. The unit features electronic overcurrent and overvoltage protection, as well as a 10 ms ride-through to maintain stability during short power interruptions. Its slide-in design simplifies installation and maintenance without requiring full rack disassembly. Technical Specifications Electrical Input Nominal Input Voltage: 24 VDC Input Voltage Range: 18–32 VDC Maximum Input Power: 160 W at full load DC Output Ratings +5 VDC: Up to 18 A (main logic supply) +12 VDC: Up to 1.5 A (I/O & specialty modules) –12 VDC: Up to 1 A (analog/specialty modules) Total Output Power: 90 W Protection & Reliability Overcurrent protection on +5 V bus Overvoltage protection 10 ms ride-through on loss of input power Supports dual-rack operation with IC697CBL700 cable Mechanical & Installation Mounting: Leftmost slot in Series 90‑70 PLC rack Backplane Connector: 48-pin Installation Type: Slide-in module Dimensions: 200 × 60 × 145.5 mm Weight: 2.47 lbs Environmental Ratings Operating Temperature: 0 °C to +60 °C Storage Temperature: –25 °C to +70 °C Protection Class: IP20 Key Features 24 VDC input, 90 W regulated output for Series 90‑70 PLC racks Supplies +5 V, +12 V, –12 V to logic and I/O modules Compatible with single or dual rack configurations Electronic overcurrent and overvoltage protection 10 ms ride-through ensures stable power under transient events Slide-in design for easy installation and maintenance Applications Ideal for powering single or multiple Series 90‑70 PLC racks in industrial automation, process control, and distributed control systems where stable DC power and module sequencing are critical. FAQ Q: Can this power supply support two racks simultaneously?A: Yes, using IC697CBL700, as long as the total load does not exceed 90 W. Q: Is the module hot-swappable?A: No, the supply must be installed or removed with power off. Q: What protection features are included?A: Overcurrent and overvoltage protection plus 10 ms ride-through capability. Q: Where should the module be installed in the rack?A: Always in the leftmost slot of the Series 90‑70 rack.
$200.00 $100.00
-
General Electric GE Fanuc IC694CHS398 RX3i 5-Slot Serial Expansion Backplane
Product Description The IC694CHS398 is a 5-slot serial expansion backplane engineered for PACSystems RX3i, enabling high-speed remote I/O expansion. This module allows the installation of additional RX3i or Series 90‑30 I/O modules in distributed locations while maintaining robust communication with the main CPU baseplate. Designed for scalable automation systems, the IC694CHS398 supports up to 50 ft (15 m) of expansion cabling and requires a dedicated Serial Expansion Power Supply in the leftmost slot (IC694PWR321, IC694PWR330, or IC694PWR331). Hot-swap of modules is not supported on this backplane, ensuring stable serial communication across chained expansion racks. Technical Specifications Backplane Characteristics Type: Serial Expansion Backplane Slots: 5 Compatible Modules: RX3i I/O modules (standard and high-speed serial) Leftmost Slot Requirement: Serial Expansion Power Supply required Hot-Swap: Not supported Expansion Connector: 25-pin D-type for daisy-chain connection Electrical Specifications Operating Voltage: 5 VDC Internal Current Draw: 170 mA Power Consumption: 0.85 W Compatible Power Supplies: IC694PWR321, IC694PWR330, IC694PWR331 Expansion & Distance Supports up to seven serial expansion backplanes in a chain Maximum cable distance between backplanes: 50 ft (15 m) Requires DIP-switch configuration for correct rack addressing Mechanical & Physical Dimensions (H × W × D): 5.12 × 10.43 × 5.59 in (130 × 265 × 142 mm) Weight: 1.19 lbs Mounting: Panel or enclosure Environmental Ratings Operating Temperature: 0 °C to 60 °C Storage Temperature: –40 °C to +85 °C Protection: IP20 Key Features 5-slot serial expansion backplane for RX3i PACSystems High-speed serial I/O extension with daisy-chain capability Compatible with RX3i and Series 90‑30 modules Requires serial expansion power supply in the leftmost slot Supports up to 50 ft (15 m) cabling for distributed I/O Industrial-grade construction suitable for scalable systems Applications Ideal for distributed or remote I/O installations, modular control systems, and large-scale PACSystems RX3i expansions requiring reliable serial communication. FAQ Q: Can I hot-swap modules on this backplane?A: No, hot-swap is not supported; all modules must be installed with power off. Q: What power supply is required?A: The leftmost slot must contain IC694PWR321, IC694PWR330, or IC694PWR331. Q: How far can expansion racks be from the main CPU?A: Up to 50 ft (15 m) using recommended cabling. Q: How many expansion backplanes can I chain together?A: Up to seven serial expansion backplanes.
$200.00 $100.00
-
General Electric GE Fanuc IC695TBB132 RX3i Extended 36-Terminal Block
Product Description The IC695TBB132 is a 36-point, extended-depth terminal block designed for PACSystems RX3i IC695-series I/O modules. Engineered for industrial field wiring, it provides secure screw-type connections and an extra-deep shroud to accommodate thicker AC wiring and large cable bundles. Functionally equivalent to the standard IC695TBB032, the IC695TBB132 adds 13 mm of depth to improve strain relief, simplify cable routing, and support high-density wiring in compact control panels. This terminal block supports both solid and stranded conductors (#14–26 AWG) and features a 7 in-lb torque rating for reliable connections under industrial vibration conditions. Technical Specifications Mechanical & Wiring Terminal Type: Screw-type, box-style Number of Terminals: 36 Wire Gauge Supported: #14–26 AWG (solid or stranded) Wire Strip Length: 0.310 in (7.87 mm) Torque Rating: 7 in-lb (0.79 N·m) Extended Depth: +13 mm (0.5 in) compared to standard models Purpose of Extended Depth: Supports thicker AC wiring and large bundles Dimensions: 6 × 6 × 1.3 in (152 × 152 × 33 mm) Weight: 3 lbs Compatibility PACSystems RX3i IC695-series high-density I/O modules Series 90‑30 equivalent modules Supports discrete, analog, and specialty 36-point modules Environmental Ratings Operating Temperature: 0 °C to 60 °C Storage Temperature: –40 °C to +85 °C Humidity: 5–95% non-condensing Functional Features 36 individually accessible screw terminals for field wiring Extra-deep shroud reduces stress on wires and improves cable management Designed for high-density AC and I/O wiring Secure clamping under vibration Easy installation and removal without disturbing module electronics Key Features Extended-depth terminal block with 36 screw terminals 13 mm additional depth for thick insulation and large wire bundles Supports #14–26 AWG solid or stranded wires 7 in-lb torque for reliable connections Ideal for high-density PACSystems RX3i IC695-series modules Durable industrial-grade construction Applications Suitable for industrial control panels, motor control centers, process automation wiring, and high-density AC I/O module installations where space is limited. FAQ Q: How does IC695TBB132 differ from IC695TBB032?A: The TBB132 adds 13 mm of depth to improve strain relief and manage thicker wires while remaining functionally identical. Q: Can it support stranded wires?A: Yes, both solid and stranded wires from #14–26 AWG are supported. Q: Is it compatible with older Series 90‑30 modules?A: Yes, it works with high-density Series 90‑30 modules without modifications. Q: Can it handle industrial vibration?A: Yes, screw-type terminals maintain secure clamping under vibration.
$200.00 $100.00
-
General Electric GE Fanuc IC694TBB132 RX3i Extended 36-Terminal Block
Product Description The IC694TBB132 is a high-density, extended-depth terminal block engineered for PACSystems RX3i and Series 90-30 high-density I/O modules. Designed for industrial field wiring, this module provides 36 screw-type terminals with secure torque-rated connections, optimized for thicker insulated AC wiring and crowded control panels. Its extra-deep shroud extends 13 mm beyond standard terminal blocks, offering improved wire routing, strain relief, and installation flexibility. The IC694TBB132 supports standard solid or stranded wire sizes from #14–26 AWG and includes a built-in strip-length guide for consistent and reliable connections. It is fully compatible with high-density RX3i and Series 90-30 I/O modules without requiring modification, making it an ideal solution for retrofit and new installations. Technical Specifications Mechanical & Wiring Terminal Type: Screw-type, box-style Number of Terminals: 36 Wire Gauge Supported: #14–26 AWG (solid or stranded) Wire Strip Length: 0.310 in (7.87 mm) Torque Rating: 7 lb-in (0.79 N·m) Extended Depth: 13 mm deeper than standard TBB032 models Dimensions: 152 × 152 × 33 mm (6 × 6 × 1.3 in) Weight: 0.35 lbs Environmental Ratings Operating Temperature: 0 °C to 60 °C Storage Temperature: –40 °C to +85 °C Certifications: UL, CSA (pending verification) Functional Features 36 individually accessible screw terminals for secure field connections Extended shroud provides better support for thick AC wiring Designed for high-density I/O modules where panel space is limited Maintains secure clamping in vibration-prone industrial environments Compatible with RX3i and Series 90-30 I/O modules Key Features Extended-depth terminal block for thicker AC wiring and crowded panels 36 screw terminals with 7 lb-in torque for reliable connections Supports #14–26 AWG solid or stranded wire Built-in strip-length guide simplifies installation Durable industrial construction for long-term reliability Fully compatible with high-density PACSystems RX3i and Series 90-30 I/O modules Applications Ideal for high-density control panels, retrofit projects, and new installations in industrial automation systems. Commonly used with AC I/O modules requiring thick wire connections, including motor control, material handling, and process control systems. FAQ Q: Is this terminal block compatible with standard TBB032 modules?A: Yes, it is functionally identical but features an extended shroud for improved wire management. Q: Can it handle stranded wires?A: Yes, it supports both solid and stranded wire types from #14–26 AWG. Q: Does it provide vibration resistance?A: Yes, the screw-type connections ensure reliable clamping in industrial environments. Q: Can it be used with older Series 90-30 modules?A: Yes, it is fully compatible with equivalent high-density Series 90-30 modules.
$200.00 $100.00
-
General Electric GE Fanuc IC697CHS782 Series 90-70 17 Slot VME Rack
Product Description The IC697CHS782 is a VME-based rack chassis engineered for the GE Fanuc Series 90-70 PLC platform. It serves as a hybrid integration backplane, enabling the installation of both IC697 control modules and industry-standard VMEbus cards within the same system. This makes it suitable for applications where PLC control must coexist with high-performance computing or third-party interface modules. Its 17-slot architecture, combined with a VME-compliant backplane, provides flexibility for system expansion while maintaining deterministic communication across modules. The chassis is designed for enclosure mounting and supports both standard convection cooling and optional forced-air configurations for higher power densities. Technical Specifications General Information Model: IC697CHS782 Manufacturer: GE Fanuc / Emerson Series: Series 90-70 Product Type: VME Integrator Rack Mounting: Rear panel or enclosure mounting Weight: 5.8 kg Rack Configuration Total capacity: 17 single-width slots Alternative layout: supports double-width module configurations with dedicated power supply position Slot pitch: 0.8 in (20.32 mm) center spacing Backplane: IEEE 1014 VMEbus compliant Addressing: configurable slot addressing via backplane settings Module Compatibility Fully compatible with GE IC697 PLC modules Supports third-party VMEbus modules for hybrid architectures Suitable for mixed control, communication, and data acquisition systems Electrical Characteristics Backplane power distribution: +5 VDC, +12 VDC, –12 VDC, and ground Typical current demand: up to ~20 A at 5 VDC (fully populated, depends on module mix) Power supply: external or rack-mounted IC697 series power supply required Supported power supply models: IC697PWR711, IC697PWR748, IC697PWR749 Cooling & Thermal Design Default cooling: natural convection Optional cooling: field-installable fan tray for high thermal loads Installation note: maintain airflow clearance for stable operation Mechanical Characteristics Construction: industrial-grade steel chassis Dimensions: 483 mm (W) × 283 mm (H) × 185 mm (D) Grounding: integrated bottom rail for cable shielding and EMI control Mounting orientation: supports vertical or horizontal installation depending on enclosure design Environmental Conditions Operating temperature: 0 °C to 60 °C Storage temperature: –40 °C to +85 °C Humidity: 5–95% non-condensing System Integration Multi-rack expansion supported via interconnect cables (9-pin interface) Requires configuration of backplane jumpers for addressing and system layout Designed for deterministic communication in distributed PLC systems Key Features 17-slot high-density rack for Series 90-70 systems VMEbus-compliant backplane for hybrid PLC and VME integration Flexible module support including third-party VME devices Robust steel enclosure for industrial environments Scalable architecture with multi-rack expansion capability Convection cooling with optional forced-air upgrade Applications This rack is commonly used in complex automation systems where PLC control must interface with high-speed data processing or specialized VME hardware. Typical use cases include power generation control systems, large-scale manufacturing lines, test systems, and legacy system upgrades requiring VME compatibility. FAQ Q: Can this rack be used with non-GE modules?A: Yes, it supports standard VMEbus modules in addition to GE IC697 PLC modules. Q: Is a power supply included with the rack?A: No, a compatible IC697 series power supply must be installed separately. Q: Does the rack support high-power configurations?A: Yes, but an optional fan assembly is recommended when using high-power modules. Q: Can multiple racks be connected in one system?A: Yes, multi-rack configurations are supported using appropriate expansion cables.
$200.00 $100.00
-
General Electric GE Fanuc IC695SPF010 RX3i 1000Base-LX SFP Fiber Module
Product Description The IC695SPF010 is a Gigabit SFP transceiver developed for use with GE Fanuc / Emerson PACSystems RX3i communication modules. It enables high-speed Ethernet connectivity over single-mode fiber, supporting long-distance data transmission in electrically noisy or distributed industrial environments. Designed for integration with RX3i PROFINET and fiber scanner modules, this SFP provides reliable 1000Base-LX optical communication with minimal electromagnetic interference. Its hot-swappable design allows installation or replacement without interrupting system operation. Technical Specifications General Information Model: IC695SPF010 Manufacturer: GE Fanuc / Emerson Series: PACSystems RX3i Product Type: SFP Fiber Optic Transceiver Form Factor: Small Form-Factor Pluggable (SFP) Optical & Network Parameters Ethernet standard: 1000Base-LX Transmission speed: 1 Gbps Fiber type: single-mode fiber (SMF) Maximum transmission distance: up to 10 km Optical interface: LX fiber connector Hot-swappable: supported Electrical Characteristics Supply voltage: 3.3 VDC (via host module) Current consumption: approx. 1.2 A (no SFP load reference) up to 1.9 A (dual SFP configuration in host module) 5 VDC requirement (host dependent): up to 1.1 A Design focus: low EMI emission and reduced power consumption Environmental Conditions Operating temperature: 0 °C to 60 °C Storage temperature: –40 °C to +85 °C Compatibility & Integration Compatible with RX3i PROFINET Scanner modules (e.g., IC695PNS001) Supported by RX3i Gigabit Fiber Scanner modules Configuration via Proficy Machine Edition (through host module) Network topologies supported (via host): line, ring, star, daisy-chain Installation & Safety Hot-pluggable for maintenance without system shutdown Designed for installation within enclosed industrial equipment Laser safety: contains invisible optical source; avoid direct exposure ESD precautions required during handling Key Features Gigabit Ethernet over single-mode fiber (1000Base-LX) Supports transmission distances up to 10 km Low electromagnetic interference for industrial environments Hot-swappable SFP design for flexible maintenance Compatible with RX3i fiber and PROFINET communication modules Applications The module is used in industrial Ethernet networks requiring long-distance communication, such as plant-wide networking, remote I/O connections, and infrastructure spanning large facilities or geographically distributed assets. It is particularly suitable for environments with high electrical noise where fiber communication is preferred. FAQ Q: What type of fiber is required?A: Single-mode fiber (SMF) is required for proper operation at full distance capability. Q: Can the module be replaced while the system is running?A: Yes, it supports hot-swapping when installed in a compatible RX3i module. Q: What is the maximum communication distance?A: Up to 10 km under standard 1000Base-LX conditions. Q: Does this module operate independently?A: No, it must be installed in a compatible RX3i communication or scanner module.
$200.00 $100.00
-
General Electric GE Fanuc IC695CPE302 RX3i PLC CPU Module with Ethernet
Product Description The IC695CPE302 is a compact, high-speed CPU module developed for the GE Fanuc / Emerson PACSystems RX3i platform. It delivers reliable control performance for medium to large automation systems, combining fast processing, integrated communications, and flexible protocol support in a single controller. Equipped with a 1.1 GHz processor and built-in networking interfaces, this CPU is designed to handle distributed control architectures, enabling seamless integration with field devices, SCADA systems, and industrial networks. Its support for modern communication standards makes it suitable for both legacy upgrades and new installations. Technical Specifications General Information Model: IC695CPE302 Manufacturer: GE Fanuc / Emerson Series: PACSystems RX3i Product Type: PLC CPU Module Installation: RX3i Universal Backplane Weight: 0.51 kg Processor & Memory CPU speed: 1.1 GHz User memory: 2 MB Memory type: SRAM with non-volatile flash backup Data retention: energy pack (battery-free retention) Communication Interfaces Ethernet: integrated dual-port Gigabit Ethernet switch (10/100/1000 Mbps) Serial port: 1 × RS-232 USB: 1 × USB 2.0 (Type-A) Status indicators: multiple LED diagnostics Supported Protocols SRTP (native GE communication) Modbus TCP/IP and Modbus RTU (slave) OPC UA for secure data exchange PROFINET (via external controller module) Ethernet Global Data (EGD) DNP3 Outstation IEC 61850 client and IEC 60870-5-104 server HART passthrough support System Capacity Discrete I/O: up to 16,000 points Analog I/O: up to 32,000 words Remote I/O devices: up to 255 (with PROFINET controller module) Power Requirements Backplane supply: 5 VDC / 3.3 VDC: approx. 1 A 24 VDC: approx. 0.5 A Environmental Specifications Operating temperature: 0 °C to 60 °C Storage temperature: –40 °C to +85 °C Compliance: UL, cUL, CE, RoHS, FCC, ATEX Zone 2, CCC Marine approvals: ABS, BV, LR, DNV-GL Programming & Engineering Programming languages: Ladder Diagram (LD) Structured Text (ST) Function Block Diagram (FBD) C language support Configuration software: Proficy Machine Edition Features: online editing, tag-based programming, reusable libraries Key Features High-speed 1.1 GHz processor for responsive control Integrated dual-port Gigabit Ethernet Broad industrial protocol compatibility Battery-free memory retention using energy pack Scalable I/O capacity for distributed systems Designed for high availability with redundancy support (MRP) Applications The module is suitable for manufacturing automation, energy systems, water treatment, and process industries requiring reliable control and extensive communication capabilities. It is particularly effective in networked environments with multiple remote I/O stations and SCADA integration. FAQ Q: Does the CPU include built-in Ethernet switching?A: Yes, it features a dual-port Gigabit Ethernet switch for network connectivity and topology flexibility. Q: Can it be used with PROFINET networks?A: Yes, PROFINET is supported when used with a compatible controller module such as PNC001. Q: Is a battery required for memory retention?A: No, it uses an energy pack for non-volatile data retention. Q: What programming environments are supported?A: It supports Ladder Logic, Structured Text, Function Block Diagram, and C programming within Proficy Machine Edition.
$200.00 $100.00
-
General Electric GE Fanuc IC695HSC304 RX3i 4-Channel High-Speed Counter
Product Description The IC695HSC304 is a dedicated high-speed counting module for the GE Fanuc / Emerson PACSystems RX3i platform, developed for precise pulse acquisition and motion-related measurements. Unlike standard I/O modules, it processes high-frequency signals locally, eliminating dependence on PLC scan time and ensuring accurate real-time performance. With support for multiple counting modes and high-frequency inputs, the module is suitable for encoder feedback, flow measurement, and fast event tracking. Integrated outputs and interrupt capabilities allow it to directly control field devices based on counting conditions. Technical Specifications General Information Model: IC695HSC304 Manufacturer: GE Fanuc / Emerson Series: PACSystems RX3i Product Type: High-Speed Counter Module Compatibility: RX3i Universal Backplane Weight: 0.74lbs Counter & I/O Configuration Counters: up to 4 independent counters High-speed inputs: 8 configurable channels High-speed outputs: 7 channels Counter modes supported: A, B, C, D, E, Z, and user-defined Quadrature (A/B) encoder support included Performance Characteristics Maximum count frequency: Up to 1.5 MHz (standard modes) Up to 750 kHz (Type C / custom modes) Internal sampling: 40 MHz (enhanced noise rejection) Response time: ≤ 2 µs Counting range: 32-bit signed integer −2,147,483,648 to +2,147,483,647 Electrical Specifications Input voltage options: 5 VDC range (approx. 4.7–5.5 VDC) 12–24 VDC range (approx. 10–26.4 VDC) Input type: positive logic high-speed signals Output voltage range: 4.7–40 VDC Output protection: electronic short-circuit protection (ESCP) Peak channel current: up to 1.5 A Peak module output current: up to 10.5 A Functional Capabilities Hardware-based pulse processing independent of CPU scan Programmable limit switch (PLS) functionality Configurable input filtering Event-driven interrupts for precise control actions Integrated high-speed output control Diagnostics & Maintenance Module fault monitoring and reporting Terminal block presence detection Firmware upgrade via onboard flash memory Supports hot insertion and removal (RIUP) Power Requirements 3.3 VDC backplane: approx. 457 mA 5 VDC backplane: approx. 64 mA Mechanical & Installation Dimensions: 34 × 145 × 140 mm Mounting: RX3i Universal Backplane Key Features Four independent high-speed counter channels Handles input frequencies up to 1.5 MHz Integrated high-speed inputs and outputs Quadrature encoder and multi-mode counting support Real-time processing without CPU dependency Programmable limit switch functionality Built-in diagnostics and interrupt handling Applications The module is widely used in high-speed automation tasks such as turbine flow measurement, conveyor tracking, packaging machinery, encoder-based positioning, and other motion-related systems requiring fast and accurate pulse counting. FAQ Q: Does the module rely on the PLC scan cycle for counting?A: No, counting is handled by dedicated hardware, ensuring accurate high-speed performance independent of CPU scan time. Q: Can it interface with encoders?A: Yes, it supports quadrature (A/B) encoder inputs for position and speed tracking. Q: What is the maximum input frequency supported?A: Up to 1.5 MHz in standard counting modes. Q: Are outputs protected against faults?A: Yes, outputs include electronic short-circuit protection for safe operation.
$200.00 $100.00
-
General Electric GE Fanuc IC695CPL410 RX3i Rackless CPU Edge Controller
Product Description The IC695CPL410 is a high-performance rackless CPU designed for the GE Fanuc / Emerson PACSystems RX3i platform. It combines deterministic PLC control with embedded edge computing capabilities, allowing industrial users to run real-time automation tasks alongside data processing, analytics, and visualization within a single device. Built around a quad-core AMD processor and supporting both VxWorks and a Linux-based PACEdge environment, this controller is intended for modern distributed architectures where control and data converge. It is suitable for applications requiring high-speed processing, advanced networking, and secure connectivity to enterprise or cloud systems. Technical Specifications General Information Model: IC695CPL410 Manufacturer: GE Fanuc / Emerson Series: PACSystems RX3i Product Type: Rackless CPU / Edge Controller Mounting: DIN rail or panel mount Weight: 0.9 kg Processor & System Architecture CPU: AMD G-Series quad-core processor (approx. 1.2 GHz) Real-time OS: VxWorks Edge environment: Linux-based PACEdge platform Supports concurrent execution of control logic and edge applications Memory & Storage User memory: 64 MB Program block capacity: up to 768 blocks Maximum block size: 128 KB Removable Data Storage Device (RDSD): supported Internal storage for logs, web HMI, and analytics applications Communication Interfaces Ethernet ports: multiple Gigabit Ethernet interfaces (front-access) Ethernet LANs: supports up to 4 independent networks Serial interface: 1 × RJ45 (RS-232 compatible) USB: 2 × USB 3.0 host ports Video output: DisplayPort (for local visualization) Supported Protocols PROFINET IO (controller/device functionality) OPC UA for secure data exchange Modbus TCP/IP Web-based HMI via PACEdge Control Performance & Capacity Discrete I/O capacity: up to 32,000 points Analog capacity: up to 32,000 words Execution speed: up to 0.15 µs per instruction System scan rates: as low as 3 ms depending on configuration Power Requirements Input voltage: 18–30 VDC Power consumption: up to 20 W Environmental Specifications Operating temperature: –40 °C to +70 °C Storage temperature: –40 °C to +85 °C Humidity: 5–95% non-condensing Optional conformal coating for harsh environments Marine certifications available (ABS, DNV-GL, BV, LR) Security Features Secure boot mechanism Trusted Platform Module (TPM) hardware Encrypted communications and authentication Protection against unauthorized firmware and network-based threats Redundancy & Availability Supports hot-standby CPU redundancy Switchover time: as fast as 300 ms PROFINET system redundancy support Key Features Integrated PLC control and edge computing platform Quad-core processor for high-speed execution Multiple Gigabit Ethernet interfaces for network segmentation Built-in industrial protocols including OPC UA and PROFINET Advanced cybersecurity with TPM and secure boot Wide temperature operation for demanding environments Applications The controller is suited for distributed control systems, smart manufacturing, energy management, and IIoT deployments. It is particularly effective in architectures requiring local data processing, edge analytics, and seamless integration with SCADA or cloud platforms. FAQ Q: Does this CPU require a traditional rack?A: No, it is a rackless design and can be mounted directly on a panel or DIN rail. Q: Can control and edge applications run simultaneously?A: Yes, real-time control runs on VxWorks while Linux-based PACEdge handles data processing and applications. Q: What redundancy options are available?A: The module supports hot-standby redundancy with fast switchover, as well as PROFINET system redundancy. Q: Is it suitable for harsh environments?A: Yes, it operates from –40 °C to +70 °C and offers optional conformal coating and marine certifications.
$200.00 $100.00
-
General Electric GE Fanuc IC695ALG508 RX3i 8-Channel RTD Input Module
Product Description The IC695ALG508 is a high-precision temperature and resistance input module developed for the GE Fanuc / Emerson PACSystems RX3i platform. It provides eight isolated differential input channels, each configurable for RTD sensing or direct resistance measurement. Designed for process environments requiring accurate thermal monitoring, the module supports multiple RTD standards and wiring configurations, including 2-wire, 3-wire, and 4-wire connections. A Sigma-Delta conversion architecture ensures stable and precise readings, while advanced diagnostics enhance system reliability and fault visibility. This module is typically deployed in applications where measurement accuracy, noise immunity, and flexible configuration are critical. Technical Specifications General Information Model: IC695ALG508 Manufacturer: GE Fanuc / Emerson Series: PACSystems RX3i Product Type: RTD / Resistance Input Module Channels: 8 isolated differential inputs Mounting: RX3i Universal Backplane Weight: 0.51 lbs Input Configuration RTD wiring: 2-wire, 3-wire, 4-wire selectable per channel Resistance ranges: 0–250 Ω 0–500 Ω 0–1000 Ω 0–2000 Ω 0–3000 Ω 0–4000 Ω Supported RTD Types Platinum (Pt 385, Pt 391.6): 50 / 100 / 200 / 500 / 1000 Ω Nickel (Ni 618, Ni 672): 100 / 200 / 500 / 1000 Ω, 120 Ω Nickel-Iron (NiFe 518): 604 Ω Copper (Cu 426): 10 / 50 / 100 Ω Performance Characteristics Conversion method: Sigma-Delta A/D Data format: 32-bit floating point 16-bit integer (stored in 32-bit field) Typical accuracy: better than ±0.1% of span at 25°C Input impedance: ~1 MΩ Notch filter: configurable from 2.3 Hz to 28 Hz Update time: ~10 ms per channel (high-speed filter) up to ~127 ms per channel (low-frequency filtering) Diagnostics & Monitoring Open-circuit (broken wire) detection Short-circuit detection High/low and high-high/low-low alarm thresholds Rate-of-change alarm (positive and negative) Internal diagnostics: watchdog, RAM and flash integrity checks Terminal block presence detection Isolation Channel grouping: 2 groups of 4 channels Field-to-backplane isolation: 250 VAC continuous 1500 VAC for 1 minute 2550 VDC for 1 second Power Requirements 3.3 VDC: approx. 400 mA 5 VDC: approx. 200 mA Maximum power dissipation: ~2.5 W Environmental Conditions Operating temperature: 0 °C to 60 °C Storage temperature: –40 °C to +85 °C Humidity: 5–95% non-condensing Mechanical & Installation Dimensions: 34 × 145 × 140 mm Terminal blocks required: IC694TBB032 or IC694TBS032 Supports hot insertion and removal (RIUP capability) Key Features Eight isolated RTD/resistance input channels Flexible wiring support (2, 3, or 4 wires per channel) High-resolution Sigma-Delta conversion for stable measurements Programmable digital filtering for noise rejection Comprehensive diagnostic and alarm functions Supports ITS-90 linearization standards Hot-swappable within RX3i systems Applications This module is typically used in temperature monitoring systems across process industries, including chemical plants, power generation, and manufacturing lines. It is suitable for applications requiring precise RTD measurement, such as reactor temperature control, heat exchanger monitoring, and environmental sensing. FAQ Q: Can different RTD types be used on each channel?A: Yes, each channel is independently configurable, allowing mixed RTD types and resistance inputs within the same module. Q: Does the module support live replacement?A: Yes, it supports removal and insertion under power (RIUP) when used in a compatible RX3i system. Q: What filtering options are available?A: A programmable notch filter from 2.3 Hz to 28 Hz is available to suppress electrical noise. Q: Is external signal conditioning required?A: No, the module includes built-in linearization and signal processing for RTD inputs.
$200.00 $100.00
You have seen 168 out of 701 products