Emerson provides advanced automation solutions for process control and industrial operations. Its product range includes DeltaV distributed control systems, Ovation control solutions, and EPRO modules. Emerson products ensure reliable operation, optimized performance, and long-term support for industrial automation worldwide.
Emerson
-
EMERSON Emerson Ovation 5X00589G01 Analog Output Module High Precision
Product Description OverviewThe Emerson Ovation 5X00589G01 is a high-precision analog output module designed for the Ovation distributed control system. It provides reliable 4–20 mA or 0–10 V DC outputs to control field devices and actuators, ensuring accurate process management in demanding industrial environments. Key Features Isolated analog outputs for enhanced signal integrity and safety Compatible with HART communication for advanced diagnostics Supports hot-swap replacement without system downtime Integrated detection of open circuits and overrange conditions Seamlessly integrates with Ovation I/O chassis and controller architecture Technical Specifications Parameter Specification Output Channels 4 per module Output Signal Types 4–20 mA (default), 0–20 mA, 0–10 V DC (configurable) Load Capacity Up to 750 Ω at 24 V DC for current outputs Resolution 16-bit digital-to-analog conversion Accuracy ±0.1% of full scale Isolation ≥500 VAC between channels and backplane Update Rate ≤100 ms per channel Operating Temperature −20 °C to +70 °C Power Consumption Typical 3.0 W ApplicationsIdeal for power generation, process control, and large-scale industrial automation projects requiring precise analog output management. The module ensures continuous operation with minimal maintenance and advanced diagnostic feedback. FAQQ: Can this module be replaced while the system is running?A: Yes, the 5X00589G01 supports hot-swap replacement without requiring system shutdown. Q: What types of signals does it support?A: Configurable for 4–20 mA, 0–20 mA, or 0–10 V DC outputs. Q: Is this module compatible with other Ovation I/O modules?A: Yes, it is fully compatible with Ovation I/O chassis and controller architecture. Similar Models Comparison 5X00588G01: 2 output channels, lower power consumption 5X00590G01: 8 output channels, extended isolation range
$200.00 $100.00
-
EMERSON Ovation 5X00411G01 | Digital Input Module | 24VDC Control
Product Description Overview The Ovation 5X00411G01 Digital Input Module is a precision-engineered interface component for the Ovation Distributed Control System (DCS). Engineered for 24VDC digital signals, this module ensures reliable signal acquisition, high accuracy, and seamless integration within industrial control environments. It is particularly suited for operations demanding high uptime and precise monitoring, including power plants, oil & gas facilities, chemical processing units, and other mission-critical industrial systems. Key Features 24VDC Digital Input Compatibility: Supports standard 24VDC input devices, enabling flexible connectivity with field equipment. Multiple Input Channels: Accepts numerous digital signals concurrently for streamlined process control. High Reliability and Accuracy: Delivers precise signal processing for critical control loops. Rugged Industrial Design: Built to operate in harsh industrial conditions, resistant to vibration, temperature extremes, and electrical noise. Seamless Ovation Integration: Fully compatible with Ovation DCS architecture for rapid deployment and system expansion. Global Support from Emerson: Comes with extensive service and technical support for long-term operational reliability. Technical Specifications Parameter Specification Model / Part Number 5X00411G01 Module Type Digital Input Module Input Voltage 24VDC Number of Channels 16 (typical, consult datasheet for variants) Signal Type Digital (On/Off) Operating Temperature -20°C to 70°C Storage Temperature -40°C to 85°C Humidity 5–95% RH, non-condensing Mounting DIN rail or chassis (Ovation-specific) Compliance CE, UL recognized components Applications Power generation monitoring and control Oil & gas production and refining automation Chemical plant process supervision Distributed control in manufacturing systems Any industrial system requiring reliable 24VDC digital input acquisition FAQ Q: Can this module be used with 120VDC inputs?A: No, 5X00411G01 is specifically designed for 24VDC inputs. Using higher voltages may damage the module. Q: How many modules can be integrated into a single Ovation DCS rack?A: Integration depends on the rack model; typically, multiple 5X00411G01 modules can be installed to accommodate all required digital inputs. Q: Is there a comparable Ovation module with analog input capability?A: Yes, the 5X00412G01 module is designed for analog inputs and complements digital modules in hybrid signal acquisition.
$200.00 $100.00
-
EMERSON Emerson 5X00357G01 Controller | Industrial Control Device
Product Description OverviewThe Emerson 5X00357G01 controller is a high-performance industrial control unit engineered for precise process management and reliable operation. Its robust construction and advanced functionality make it suitable for a wide range of industrial applications. Key Features High-resolution LCD screen for clear monitoring and intuitive programming PID and On/Off control modes for stable and accurate regulation Flexible input/output range to accommodate various equipment Modbus RTU communication for seamless integration with industrial networks Compact, durable housing designed to withstand harsh operating environments Technical Specifications Specification Details Model 5X00357G01 Input Voltage 24 VDC Output Voltage 0–10 VDC Communication Protocol Modbus RTU Display LCD Screen Control Modes PID, On/Off Operating Temperature -10°C to 60°C Dimensions 120 mm × 80 mm × 40 mm Protection Rating IP20 (recommended, verify per installation) ApplicationsIdeal for HVAC systems, industrial machinery, and process automation where precise temperature, pressure, or flow regulation is required. Compatible with existing Modbus RTU networks and multi-device control systems. FAQ Q: Can the controller operate outside the specified temperature range?A: Continuous operation outside -10°C to 60°C may affect performance and reliability. Q: Is the unit compatible with other Emerson controllers?A: Yes, the 5X00357G01 supports Modbus RTU, allowing integration with other Emerson devices. Q: Does it support external alarms or sensors?A: The controller supports configurable input/output channels for alarms, sensors, and actuators. Similar Models Emerson 5X00356G01: PID-only controller, smaller LCD display Emerson 5X00358G01: Expanded input/output capabilities for multi-loop control
$200.00 $100.00
-
EMERSON Emerson 5X00034G01 Fused Compact Digital Input Module | 125VAC/VDC
Product Description OverviewThe 5X00034G01 from Emerson is a high-reliability fused compact digital input module designed for integration with Ovation or other compatible control systems. It provides 16 individually fused inputs from a common power source, offering enhanced protection for field wiring and equipment when used with 125VAC or 125VDC digital input modules such as 1C31107G02. Key Features Provides 16 individually fused channels to protect field inputs and connected power sources. Compatible with both 125VAC and 125VDC digital input modules. Enhances system safety by reducing the risk of overloads or short circuits. Compact design for efficient installation in tight control cabinets. Easy integration with Ovation controllers and other modular DCS platforms. Technical Specifications Specification Details Model 5X00034G01 Input Voltage 24 VDC Output Signal 4–20 mA Communication Protocol Modbus RTU Display LCD Operating Temperature -10°C to +60°C Dimensions 120 mm × 80 mm × 40 mm Weight 300 g Control Type PID (Proportional-Integral-Derivative) Control Modes Automatic, Manual, Cascade Setting Range 0–100% Accuracy ±0.2% Response Time 10 ms Power Consumption 5 W ApplicationsThe 5X00034G01 is ideal for industrial process control environments requiring additional input protection, including power plants, chemical processing facilities, and other critical systems. It ensures reliable operation and safeguards sensitive inputs from electrical faults. FAQ Q: Is external fusing required with this module?A: When using a 125VAC/VDC digital input module without the 5X00034G01, external fusing or current limiting devices are recommended to protect wiring and power sources. Q: How many inputs can this module protect?A: This module provides 16 individually fused inputs from a shared supply. Q: Can this module integrate with other DCS controllers?A: Yes, while optimized for Emerson Ovation systems, it can interface with other compatible control platforms that accept 4–20 mA or Modbus RTU signals.
$200.00 $100.00
-
EMERSON Emerson Ovation 1C31233G02 E-MOD Module | 24/48VDC Differential
Product Description OverviewThe 1C31233G02 is a differential electronic module (E-MOD) from Emerson Ovation, designed for seamless integration into the Ovation Distributed Control System (DCS). This module acts as a robust interface between field devices and the Ovation controller, delivering high reliability and consistent performance in demanding industrial environments. Key Features High-speed data bus enabling rapid and accurate signal processing at 1 Mbps. Multi-protocol support including Modbus, HART, and Profibus DP for flexible connectivity. Rugged construction to withstand extreme temperatures, humidity, and electrical noise. Compatible with a variety of field devices, such as sensors, actuators, and transmitters. Advanced diagnostics to detect and report system issues efficiently. Redundancy-ready for pairing with a backup module to maintain continuous operation. Built-in security measures to prevent unauthorized access to system signals. Technical Specifications Specification Details Power Supply 24/48 VDC Power Consumption 5 W Operating Temperature -40°C to +70°C (-40°F to 158°F) Humidity Range 0% to 95% RH, non-condensing Communication Protocols Modbus, HART, Profibus DP Data Bus Speed 1 Mbps Module Type Differential Electronic Module (E-MOD) ApplicationsThe 1C31233G02 is suitable for process control, sequential event monitoring, and industrial control applications where high reliability, speed, and protocol flexibility are critical. Its rugged design allows operation in extreme temperature ranges and electrically noisy environments. FAQ Q: Can this module work with non-Ovation DCS platforms?A: The module is optimized for Emerson Ovation DCS. Use with other platforms may require interface adaptation. Q: How is redundancy implemented?A: Two modules can be configured as a redundant pair to ensure continuous operation. Q: What modules are comparable within the Ovation series?A: Similar modules include 1C31232G02 and 1C31234G03, offering variations in input type, speed, and protocol support.
$200.00 $100.00
-
EMERSON Emerson Ovation 1C31232G02 Digital Input Module | Industrial Control
Product Description OverviewThe 1C31232G02 from Emerson Ovation is a high-performance differential digital input module designed for integration with the Ovation Distributed Control System (DCS). It efficiently acquires and processes digital signals from field devices such as sensors, switches, and actuators, providing reliable operation even in challenging industrial environments. Key Features Handles 32 differential digital inputs simultaneously for extensive signal monitoring. Fully optically isolated inputs to protect against electrical noise and ensure signal integrity. High-speed response with acquisition times under 2 μs for precise system control. Built-in diagnostics and fault detection simplify troubleshooting and maintenance. User-friendly configuration and maintenance for improved operational efficiency. Technical Specifications Specification Details Input Voltage Range -40V to +40V DC Input Current Range -1.5 mA to +1.5 mA Input Impedance >100 kΩ Response Time <2 μs Accuracy ±0.5% of full scale Power Consumption 2 W Operating Temperature -40°C to +70°C Storage Temperature -55°C to +85°C Humidity 5% to 95% RH (non-condensing) Dimensions 173 mm x 110 mm x 53 mm (6.8 x 4.3 x 2.1 in) Weight 1 kg (2.2 lb) ApplicationsIdeal for power generation, process control, and industrial automation systems where reliable, high-speed digital signal acquisition is critical. Suitable for environments with electrical noise or extreme temperatures. FAQ Q: Can this module interface with other DCS systems?A: The 1C31232G02 is optimized for Emerson Ovation DCS. Integration with other systems may require interface adaptation. Q: How are faults reported?A: The module includes diagnostic outputs and error reporting signals compatible with Ovation monitoring software. Q: Are there similar modules in the Ovation series?A: Emerson Ovation also offers modules such as 1C31231G01 and 1C31233G03, which vary in input counts and isolation features.
$200.00 $100.00
-
EMERSON Emerson Ovation 1C31197G05 Analog Output Module 0-5V DC High-Performance
Product Description OverviewThe Emerson Ovation 1C31197G05 is a precision analog output module engineered for seamless integration within the Ovation Distributed Control System (DCS). Designed for industrial environments requiring accurate voltage outputs, this module ensures dependable performance for critical monitoring and control applications. Key Features Analog Output Range: 0–5 V DC, ideal for standard process control signals Accuracy: ±0.1% of full scale, supporting precise measurement and control Resolution: 12-bit, providing detailed and high-fidelity output Update Rate: 100 samples per second for near real-time signal responsiveness Power Supply: 24 V DC operation Dimensions: 191 mm (L) × 133 mm (W) × 76 mm (H) Technical Specifications Parameter Specification Output Type Voltage (0–5 V DC) Accuracy ±0.1% FS Resolution 12-bit Update Rate 100 samples/sec Power Supply 24 V DC Operating Temperature -20°C to +70°C (typical industrial range) Dimensions 191 × 133 × 76 mm ApplicationsThis module is suited for power plants, process automation, and real-time control systems where reliable and accurate analog output is critical. It supports high-resolution process monitoring and integration with advanced control loops. Similar Products & Comparisons Emerson Ovation 1C31129G02: 0–10 V DC analog output Emerson Ovation 1C31129G03: 0–20 mA analog output with diagnostic capabilities Emerson Ovation 1C31129G04: 0–20 mA analog output without diagnostics Emerson Ovation 1C31132G01: 0–20 mA analog output with diagnostics FAQ Q: Can this module be used in high-temperature environments?A: Yes, it operates reliably within industrial standard temperatures of -20°C to +70°C. Q: Is the module compatible with other Ovation DCS modules?A: Absolutely, it is fully compatible and designed for seamless integration.
$200.00 $100.00
-
EMERSON Emerson Ovation 1C31129G04 Analog Output Module | 0-20/4-20 mA
Product Description Overview The Emerson Ovation 1C31129G04 is a precision analog output module designed for seamless integration with the Ovation Distributed Control System (DCS). It delivers configurable current output signals to control valves, actuators, and other analog devices, supporting either 0–20 mA or 4–20 mA ranges without embedded diagnostics. Key Features Supports configurable analog output from 0–20 mA or 4–20 mA Compatible with standard Ovation DCS output channels Provides stable, low-noise signal transmission Flexible configuration via I/O Builder software Designed for continuous, reliable operation in industrial environments Technical Specifications Parameter Specification Module Type Analog Output Channels Configurable per system requirements Output Range 0–20 mA default, 4–20 mA selectable in I/O Builder Diagnostics Not included Resolution 12-bit or system-defined Compatibility Emerson Ovation DCS Load Resistance Typically up to 600 Ω at 20 mA Response Time <10 ms typical Operating Temperature 0°C to 60°C Mounting Rack-mounted Applications Controlling analog devices such as valves, pumps, and actuators Integration into Ovation DCS for process automation loops Signal conversion for control and monitoring systems in power plants, chemical processing, and water treatment FAQ Q: Can I switch between 0–20 mA and 4–20 mA outputs?A: Yes, the output range can be selected during configuration in the Ovation I/O Builder. Q: Does this module provide diagnostic feedback for output signals?A: No, the 1C31129G04 operates without embedded diagnostics. Users must implement external monitoring if diagnostics are required. Q: Are there similar modules with built-in diagnostics?A: Emerson offers other analog output modules in the Ovation series with diagnostic capabilities, suitable for applications requiring enhanced signal monitoring.
$200.00 $100.00
-
EMERSON Emerson Ovation 1C31107G01 Digital Input Module | 16-Channel
Product Description Overview The Emerson Ovation 1C31107G01 is a high-performance digital input module engineered for integration with the Ovation Distributed Control System (DCS). It provides reliable acquisition of discrete input signals from a wide range of field devices, supporting both process monitoring and automation control in industrial environments. Key Features Supports up to 16 independent digital input channels Compatible with 24 VAC, 24 VDC, 48 VDC signals Operates in single-ended or differential configurations for flexible installation High noise immunity and robust signal detection Designed for continuous industrial operation with minimal maintenance Technical Specifications Parameter Specification Module Type Digital Input Channels 16 Input Voltage 24/48 VAC/DC Input Configuration Single-ended / Differential Signal Type Discrete (ON/OFF) Compatibility Emerson Ovation DCS Isolation Channel-to-channel isolation supported Operating Temperature 0°C to 60°C Mounting Rack-mounted Applications Process monitoring in power plants, refineries, and water treatment facilities Integration with Ovation DCS for automated control loops Monitoring and diagnostics of field equipment such as sensors, switches, and relays FAQ Q: Can this module accept both AC and DC signals simultaneously?A: The module is configurable for either 24/48 VAC or 24/48 VDC inputs, but each channel must be wired consistently according to the selected mode. Q: What is the difference between single-ended and differential inputs?A: Single-ended inputs measure voltage relative to a common ground, while differential inputs measure the voltage difference between two terminals, providing higher noise immunity for long-distance signal transmission. Q: Are similar modules available for higher channel counts?A: Emerson offers extended digital input modules in the Ovation series with up to 32 channels, suitable for larger systems requiring dense I/O.
$200.00 $100.00
-
EMERSON Emerson Ovation 5X00063G01 HART Analog Output Module | 8-Channel
Product Description OverviewThe Emerson Ovation 5X00063G01 is an 8-channel HART analog output module designed for seamless integration into Ovation control systems. It provides reliable signal transmission from the control processor to field devices, ensuring accurate 4–20 mA analog outputs. The module incorporates passive circuitry on each channel and includes a serviceable micro-fuse for protecting auxiliary power to the field-side circuits, enhancing system safety and maintainability. Key Features HART-Compatible Analog Output: Supports 4–20 mA communication for field devices with full HART protocol compatibility. Eight Independent Channels: Each channel has dedicated passive circuitry for stable signal conversion. User-Serviceable Fuse: Integrated fast-acting micro-fuse (0.6A, 125V) located on the Personality module protects the field-side power. Plug-In Design: Simplifies installation and replacement without extensive system downtime. Reliable Protection: Ensures safe operation by preventing overcurrent conditions on all output channels. Technical Specifications Parameter Specification Model Number 5X00063G01 Product Type HART Analog Output Module Channels 8 Output Signal 4–20 mA HART Fuse Type Plug-in Micro-Fuse Fuse Rating 0.6A, 125V, Fast Acting Channel Circuitry Passive on all eight channels Serviceability User-replaceable fuse on Personality module Mounting Plug-in interface Application DCS analog output to field devices Applications Distributed control systems requiring precise analog outputs Control of valves, actuators, and transmitters via 4–20 mA HART signals Industrial environments where channel protection and easy maintenance are critical FAQ Q: Can I replace the fuse without removing the module from the rack?A: Yes, the micro-fuse is located on the Personality module and can be serviced without full module removal. Q: Is this module compatible with non-HART analog devices?A: While designed for HART communication, the module outputs standard 4–20 mA signals compatible with conventional analog devices. Similar Models Comparison 5X00062G02: Four-channel HART output, lower channel density. 5X00064G03: Eight-channel output with higher voltage isolation, suitable for high-noise environments.
$200.00 $100.00
-
EMERSON Emerson Ovation 5X00300G02 Analog Output Module | High-Precision DCS
Product Description OverviewThe Emerson Ovation 5X00300G02 is a high-performance analog output module engineered for precise control in Ovation Distributed Control Systems (DCS). This module converts digital control commands into stable analog signals, supporting a variety of industrial process applications. Its high accuracy, fast response, and robust diagnostics make it suitable for critical operations in energy, water, and manufacturing sectors. Key Features High-Precision Output: 16-bit resolution with ±0.1% full-scale accuracy ensures reliable and precise analog signals. Versatile Output Range: Supports -10V to +10V output, compatible with a wide range of industrial control devices. Rapid Response: 250 ms update rate allows the module to reflect process changes in near real-time. Integrated Fault Detection: Built-in diagnostics enhance operational reliability and reduce potential downtime. Compact Design: Small form factor (173 × 100 × 42 mm) simplifies installation and integration into dense control racks. Durable Operation: Rated for extreme temperatures (-40°C to +70°C) and reliable 24VDC operation. Technical Specifications Parameter Specification Model Number 5X00300G02 Product Type Analog Output Module Number of Channels 16 Output Range -10V to +10V Accuracy ±0.1% full scale Resolution 16-bit Update Rate 250 ms Power Supply 24VDC, 200 mA Operating Temperature -40°C to +70°C Dimensions 173 × 100 × 42 mm (6.81" × 3.94" × 1.65") Weight ~0.72 kg Diagnostics Built-in fault detection and signaling Mounting Rack or panel mount compatible Applications Distributed Control Systems for power plants Industrial process control in water and wastewater facilities Oil, gas, and chemical process control Manufacturing automation requiring high-precision analog outputs FAQ Q: Can this module handle simultaneous high-speed updates for all 16 channels?A: Yes, the 250 ms update rate applies to all channels, ensuring consistent and synchronized analog output performance. Q: Is it compatible with older Ovation analog output modules?A: The 5X00300G02 integrates seamlessly into existing Ovation DCS installations, maintaining backward compatibility with prior module generations. Similar Models Comparison 5X00299G01: Lower resolution (12-bit), slower update rate, suitable for less demanding applications. 5X00301G03: Extended voltage range (-15V to +15V) with slightly higher power consumption for advanced control scenarios.
$200.00 $100.00
-
EMERSON Emerson Ovation 1C31177G03 Loop Interface Module | DCS LIM
Product Description OverviewThe Emerson Ovation 1C31177G03 is a high-performance Loop Interface Module (LIM) designed for Ovation Distributed Control Systems (DCS). It provides reliable signal conditioning and seamless conversion of analog signals from field instruments to digital data for the control processor. With robust electrical isolation and industrial-grade durability, this module ensures secure and precise operation in demanding industrial environments. Key Features Precision Signal Conditioning: Accurately filters and converts analog inputs for optimal DCS performance. Full Electrical Isolation: Protects control circuits from transients, surges, and electromagnetic interference. Modular & Compact Design: Space-efficient layout suitable for dense installations with flexible mounting options. Industrial Reliability: Rated for wide temperature, humidity, and vibration ranges to withstand harsh operational conditions. Ethernet-Compatible Communication: Supports modern network signaling for integration with Ovation systems. Technical Specifications Parameter Specification Model Number 1C31177G03 Product Type Loop Interface Module (LIM) Dimensions 228 × 25 × 175 mm Weight 0.72 kg Power Supply Standard Ovation LIM power input Communication Ethernet-compatible signaling Signal Handling High-density analog input support Isolation Full electrical isolation between field and control circuits Operating Environment Temperature, humidity, vibration rated for industrial facilities Construction Modular design for flexible system integration ApplicationsIdeal for precise signal interfacing in: Power generation control systems Water and wastewater DCS monitoring Oil and gas instrumentation Chemical and manufacturing process control FAQ Q: Can the 1C31177G03 handle multiple analog inputs simultaneously?A: Yes, each channel is designed for high-density analog signal handling, supporting multiple simultaneous inputs with full isolation. Q: Is this module compatible with previous Ovation LIMs?A: The module integrates seamlessly with existing Ovation DCS systems and is fully backward-compatible with other LIM series devices. Similar Models Comparison 1C31176G02: Smaller footprint, lower input density, slightly reduced isolation rating. 1C31178G04: Extended temperature and vibration tolerance, suitable for extreme environments.
$200.00 $100.00
-
EMERSON Emerson Ovation 1C31227G02 Analog Input Module | Industrial Control
Product Description OverviewThe Emerson Ovation 1C31227G02 is a precision analog input module engineered for the Emerson Ovation control platform. It captures analog signals from sensors and field devices, converting them into high-resolution digital signals for reliable process monitoring and control. Its wide signal compatibility and robust design make it suitable for critical industrial environments, including power generation, water treatment, and manufacturing automation. Key Features Supports diverse input types: voltage (-10V to +10V), current (4–20 mA), and temperature (0°C to 100°C). High precision performance with ±0.1% full-scale accuracy and 16-bit resolution. Ultra-low noise operation (<0.1 mV RMS) and minimal long-term drift (<0.01% per year). Fully isolated input channels to prevent ground faults and enhance operational safety. Simplified configuration and maintenance for fast deployment. Wide operating temperature range (-40°C to +70°C) and extended storage range (-55°C to +85°C). High common-mode rejection ratio (>120 dB) for stable signal processing in noisy environments. Technical Specifications Parameter Specification Input Range -10V to +10V, 4–20 mA, 0–100°C Accuracy ±0.1% of full scale Resolution 16-bit Noise <0.1 mV RMS Drift <0.01% per year Input Impedance 2 MΩ Common Mode Rejection >120 dB Operating Temperature -40°C to +70°C Storage Temperature -55°C to +85°C Humidity 0–95% non-condensing Isolation Galvanic isolation on all inputs ApplicationsThe module is ideal for industrial control systems requiring precise analog measurement, such as: Power generation monitoring Water and wastewater process control Oil and gas instrumentation Chemical plant automation FAQ Q: Can this module handle both voltage and current inputs simultaneously?A: Yes, the 1C31227G02 supports flexible input types, but each channel must be configured individually for the correct signal type. Q: Is this module compatible with other Emerson Ovation modules?A: Yes, it is fully compatible with the Ovation system and can integrate with other digital and analog modules for scalable control. Similar Models Comparison 1C31226G01 – Lower resolution (12-bit) and limited temperature range. 1C31228G03 – Enhanced temperature range (-40°C to +85°C) but slightly higher noise (<0.2 mV RMS).
$200.00 $100.00
-
EMERSON Emerson 1C31116G03 Analog Input Module | Ovation 8-Channel 0-20mA
Product Description OverviewThe 1C31116G03 (Ovation 1C31116G03) is a high-performance analog input module engineered for seamless integration with the Emerson Ovation Distributed Control System (DCS). Designed for precise signal monitoring and control applications, this module delivers reliable local-powered current inputs with high resolution and accuracy. Technical Specifications Specification Details Manufacturer Emerson Model / Part Number 1C31116G03 Product Type Analog Input Module Input Channels 8 Analog Inputs Input Signal Range 0–20 mA (Locally Powered) Resolution 13-bit Accuracy ±0.1% of full scale (typical) Response Time <100 ms Isolation Channel-to-channel and channel-to-system Operating Temperature 0–60°C Storage Temperature -40–85°C Dimensions (L × W × H) 15.2 cm × 10.8 cm × 2.5 cm (6 × 4.3 × 1 in) Weight 2 kg (4.4 lbs) ApplicationsThe 1C31116G03 is ideal for real-time process monitoring, control loop feedback, and industrial automation applications in power generation, water treatment, and other critical infrastructure environments. It supports precise analog input conversion, ensuring accurate system performance and reliability. FAQ Q: Can this module support other input ranges besides 0–20 mA?A: The module is designed specifically for 0–20 mA local-powered inputs. Alternative ranges require external signal conditioning. Q: Is the module compatible with previous Ovation DCS versions?A: Yes, it is backward compatible with most Emerson Ovation system generations. Q: How does this model compare to the 1C31115G02?A: The 1C31116G03 offers improved resolution (13-bit vs. 12-bit) and faster response time, providing enhanced signal accuracy for critical processes.
$200.00 $100.00
-
EMERSON Emerson Ovation 1C31181G02 Remote I/O Module Industrial Control
Product Description Overview The Emerson Ovation 1C31181G02 is a Remote I/O Module (RIM) engineered to seamlessly integrate with the Ovation Distributed Control System (DCS). It provides a high-reliability interface between field devices and the Ovation control network, ensuring accurate data acquisition and system stability under demanding industrial conditions. Key Features Modular Architecture: Supports flexible configuration for analog, digital, and discrete I/O channels, enabling customization for specific process requirements. High-Speed Data Handling: Delivers real-time data with a scan rate of up to 100 ms, ensuring responsive control and monitoring. Robust Construction: Encased in a NEMA 4X-rated enclosure, capable of withstanding dust, water, and extreme temperatures from -40°C to 85°C. Power Efficient: Operates on a standard 24V DC supply. Wide Humidity Tolerance: Functions reliably in 0–95% non-condensing environments. Technical Specifications Specification Details Module Type Remote I/O Module (RIM) I/O Points Up to 32 Supported I/O Types Analog, Digital, Discrete Scan Rate Up to 100 ms Power Supply 24 VDC Operating Temperature -40°C to 85°C Humidity Range 0–95% Non-Condensing Enclosure Rating NEMA 4X Communication Interface Ovation Network Compatible Applications The Emerson Ovation 1C31181G02 is ideal for: Process control in power generation and distribution Factory automation systems Environmental monitoring stations Industrial process management FAQ Q: How many I/O points does the module support?A: Up to 32 points for analog, digital, or discrete signals. Q: Can it operate in extreme temperatures?A: Yes, the module functions reliably between -40°C and 85°C. Q: Is it compatible with other Ovation modules?A: Fully compatible with the Ovation DCS network and other Ovation RIM units. Q: What makes it suitable for harsh environments?A: The NEMA 4X enclosure provides dust, water, and corrosion resistance, ensuring reliable operation.
$200.00 $100.00
-
EMERSON Emerson Ovation 5X00785G09 Power Supply System Fanless DIN-Rail
Product Description Overview The Emerson Ovation™ Power Supply System (5X00785G09) is a modular, fanless DIN-rail power solution designed to deliver reliable and stable power to Ovation controllers and I/O modules. The system features redundant configurations, with each power unit supplied by independent wide-range AC or DC inputs. Dual diode-auctioned outputs ensure uninterrupted power to controller chassis, I/O modules, and loops or contact wetting. Optional 48VDC auxiliary power is available for loops and contact wetting. Key Features Modular, fanless design for enhanced system reliability Independent main and auxiliary power units with hot-swappable replacement Dual AC/DC wide-range input, reducing spare part requirements Diode-auctioned outputs ensure continuous power availability High-efficiency design reduces heat generation and extends equipment lifespan Power factor correction minimizes energy consumption Supports 24VDC main/auxiliary output, available in 10A or 20A configurations Technical Specifications 10-Amp Power Scheme Input Voltage: 85–264 VAC (43–67 Hz) or 90–375 VDC Output Voltage/Current: 24 VDC / 10 A (Main), 24 VDC / 10 A (Auxiliary) Output Power: 240 W (Main/Aux) Configuration: Four 10A modules, redundant main/auxiliary Life Expectancy: 8 years @ 40°C Features: Diode-auctioned outputs, DIN-rail mounting, integrated circuit breakers 20-Amp Power Scheme Input Voltage: 85–264 VAC (43–67 Hz) or 90–375 VDC Output Voltage/Current: 24 VDC / 20 A (Main), 24 VDC / 20 A (Auxiliary) Output Power: 480 W (Main/Aux) Configuration: Four 20A modules, redundant main/auxiliary Life Expectancy: 15 years @ 40°C (with 10A load) Features: Diode-auctioned outputs, DIN-rail mounting, power distribution terminal strip Applications Ovation control systems in thermal, nuclear, and renewable power plants Industrial automation requiring highly reliable power Continuous operation for controller and I/O modules FAQ Q: Does the system support hot-swapping?A: Yes, the main and auxiliary power modules are hot-swappable, allowing replacement without downtime. Q: Can AC and DC power inputs be used simultaneously?A: Yes, the dual-input design supports both AC and DC sources for redundant power. Q: What is the expected lifespan of the fanless power supply?A: The 10A power scheme lasts up to 8 years, and the 20A scheme up to 15 years at 40°C with a 10A load. Q: Is 48VDC auxiliary power available?A: Yes, it can provide power for I/O loops or contact wetting as required.
$200.00 $100.00
-
EMERSON Emerson Ovation 5X00167G01 Analog Output Module | HART
Product Description Overview The Emerson Ovation 5X00167G01 is a precision analog output module engineered for integration within the Emerson Ovation control system. It provides reliable, high-resolution analog signals to control field devices such as actuators, valves, and recording instruments. Full HART protocol support allows advanced diagnostics and communication with intelligent field devices, enhancing system monitoring and predictive maintenance capabilities. Key Features Four independent analog output channels HART-compatible for enhanced diagnostics and device configuration High accuracy with ±0.15% full-scale output precision 12-bit output resolution for fine control Fast update rate of 250 ms per channel Operates in extreme temperatures from -40°C to +80°C DIN-rail mountable for convenient installation Low-power operation: 24 VDC, 250 mA Technical Specifications Parameter Specification Output Range 4–20 mA Output Accuracy ±0.15% of full scale Output Resolution 12-bit Update Rate 250 ms Operating Temperature -40°C to +80°C Power Supply 24 VDC, 250 mA Mounting DIN rail Communication Protocol HART Applications The Emerson Ovation 5X00167G01 is suitable for a wide range of industrial applications including: Process and plant control systems Machine automation and robotics Building management and environmental monitoring Precise actuator and valve control FAQ Q: Can this module control multiple devices simultaneously?A: Yes, it offers four independent analog outputs that can interface with separate devices simultaneously. Q: Does it support HART-enabled instruments?A: Yes, the module fully supports HART communication for diagnostics and configuration of intelligent devices. Q: What installation options are available?A: The module is DIN-rail mountable for easy integration into control panels. Similar Models Comparison Emerson Ovation 5X00166G01 – 2-channel analog output with HART Emerson Ovation 5X00168G01 – 8-channel high-speed analog output module
$200.00 $100.00
-
EMERSON Emerson Ovation 5X00419G02 Ethernet Link Controller Module
Product Description OverviewThe 5X00419G02 module from Emerson Ovation is a high-performance Ethernet Link Controller designed for critical industrial control systems. Engineered for precision and reliability, this module enables seamless communication between controllers and network devices, supporting accurate time-stamping and long-term operational stability in challenging industrial environments. Key Features Ethernet Connectivity: Ensures fast, reliable data exchange between controllers and network devices Precision Time-Stamping: Facilitates exact system time synchronization for process monitoring Durable Construction: Rugged design suitable for extreme temperatures, humidity, and industrial conditions Flexible Output Configuration: Configurable analog outputs for various application needs Technical Specifications Specification Details Model Number 5X00419G02 Product Type Ethernet Link Controller Module Compatibility Emerson Ovation DCS Output Channels 4 analog outputs Output Range 4–20 mA or 0–10 V (configurable) Output Resolution 16-bit Isolation 1500 V galvanic isolation Mounting Type Rack-mounted Module Dimensions Standard Ovation module size (specifics available upon request) Weight 1.2 kg (2.6 lbs) Operating Temperature -20°C to 70°C (-4°F to 158°F) Storage Temperature -40°C to 85°C (-40°F to 185°F) Humidity 5% to 95% non-condensing Certifications CE, UL, RoHS compliant Origin USA ApplicationsIdeal for industrial process control, including power generation, water treatment, and chemical processing. The module supports real-time monitoring and automation tasks where precise timing and reliable network communication are critical. FAQQ: Can the module be used in high-humidity environments?A: Yes, it supports 5–95% non-condensing humidity conditions. Q: Is the module compatible with other Emerson Ovation DCS devices?A: Yes, it is fully compatible with the Ovation Distributed Control System. Q: What output types are supported?A: Configurable 4–20 mA or 0–10 V analog outputs. Related Models ComparisonOther Ovation modules offer similar functionality, but 5X00419G02 provides enhanced Ethernet connectivity and precise time-stamping for high-reliability industrial applications.
$200.00 $100.00
-
EMERSON Emerson 5X00273G01 | Ovation | Switching I/O Module
Product Description Overview The 5X00273G01 Switching Input/Output Module from Emerson Ovation is designed for robust digital signal acquisition and precise output control in industrial applications. It provides reliable monitoring of discrete input signals and control of output devices, ensuring safe and accurate operation in distributed control systems. The module uses an RS-485 interface to communicate with computers or controllers, supporting standard Modbus protocols or customizable communication for remote monitoring and control. Key Features Digital I/O Functionality: Accurately monitors switching signals and controls output states. RS-485 Communication: Enables real-time data transmission and remote control. Built-in Protection: Reverse Connection Protection: Prevents damage if power connections are reversed. Overvoltage Protection: Disconnects automatically during voltage spikes to protect the module. Industrial Reliability: Designed to operate continuously in harsh electrical environments. Technical Specifications Parameter Specification Model 5X00273G01 Module Type Switching Input/Output (Digital I/O) Communication Interface RS-485 Supported Protocols Modbus RTU / Custom Protocols Input Voltage 24V DC (typical) Output Capacity 0.5A per channel (typical) Isolation Galvanic isolation between I/O and communication bus Protection Features Reverse polarity protection, Overvoltage protection Weight 1 kg Operating Temperature -20°C to 70°C Storage Temperature -40°C to 85°C Warranty 12 months Origin USA Applications Distributed Control Systems (DCS) Industrial Process Automation Remote Machinery Monitoring and Control Digital Signal Interfacing for SCADA Systems FAQ Q: Can multiple modules share the same RS-485 bus?A: Yes, RS-485 supports daisy-chain connections for multiple devices on a single bus. Q: Is this module suitable for outdoor use?A: The module is robust, but installation in a properly sealed enclosure is recommended to protect against dust and moisture. Q: Are there other Emerson Ovation modules with more I/O channels?A: Yes, the 5X00274 series offers expanded I/O capacity while maintaining similar protection features.
$200.00 $100.00
-
EMERSON Ovation 1C31113G05 Analog Input Module ±5 V 13-Bit Resolution
Product Description Overview The Ovation 1C31113G05 is a high-precision analog input module designed to capture voltage and current signals in control systems. Supporting ±5 V input range with 13-bit resolution, it ensures accurate data acquisition for complex automation applications. The module can also be configured for 0-20 mA or 4-20 mA field-powered input, allowing flexible integration into diverse system architectures. Key Features Model & Part Number: 1C31113G05 Functionality: Analog Input Module for voltage and current signals Voltage Input Range: ±5 V Current Input: Configurable for 0-20 mA or 4-20 mA (field-powered) Resolution: 13-bit Field Power Options: Selectable via I/O Builder Manufacturer: Ovation Applications The module is suitable for applications requiring high-fidelity analog signal processing, including: Distributed control systems (DCS) Process monitoring and instrumentation Multi-channel data acquisition systems Safety-critical control loops FAQ Q: Can this module operate with both voltage and current signals simultaneously?A: The 1C31113G05 supports configurable input modes, but only one mode (voltage or current) can be active per channel at a time. Q: What is the maximum number of channels supported?A: Each module provides eight analog input channels. Q: Are there alternative Ovation modules for higher resolution or wider voltage range?A: Yes, models such as 1C31114G0 offer 16-bit resolution, and 1C31115G0 supports ±10 V input. Technical Specifications Table Specification Details Part Number 1C31113G05 Module Type Analog Input Module Input Voltage Range ±5 V Input Current Range 0-20 mA or 4-20 mA (field-powered) Resolution 13-bit Channels 8 Configuration Tool I/O Builder Manufacturer Ovation
$200.00 $100.00
-
EMERSON Emerson Ovation 5X00419G01 Ethernet Link Controller Industrial Accessory
Product Description Overview The Emerson Ovation 5X00419G01 is a high-performance Ethernet Link Controller engineered for industrial control networks. Designed to optimize system connectivity, it supports 16 independent channels and a dedicated Ethernet port, enabling reliable and scalable communication for automation environments. Its rugged design ensures consistent performance across demanding operational conditions. Key Features Model & Part Number: Ovation 5X00419G01 Functionality: Multi-channel Ethernet Link Controller Channels: 16 independent control channels Communication Interface: 1 x Ethernet port supporting standard industrial protocols Voltage Rating: 24 VDC Operating Temperature Range: -20°C to +60°C Certifications: IEC 61508 SIL2 compliant for functional safety Construction: Compact, durable housing suitable for industrial panels Dimensions & Weight Length: 150 mm (5.91 in) Width: 100 mm (3.94 in) Height: 50 mm (1.97 in) Weight: 0.19 kg (0.42 lbs) Applications Ideal for automation systems requiring precise channel management and Ethernet connectivity, including: Distributed control systems (DCS) Remote I/O monitoring Industrial process control Safety-integrated control applications FAQ Q: Can the 5X00419G01 operate in high-humidity environments?A: Yes, it is designed for industrial conditions, including moderate humidity, but standard environmental ratings should be followed. Q: How many devices can be networked via Ethernet?A: The controller supports connection to multiple devices through its standard Ethernet interface, subject to network configuration. Q: Are there similar models for comparison?A: Emerson offers other Ethernet link controllers like 5X00420G01 with extended temperature range and additional I/O channels for larger automation setups. Technical Specifications Table Specification Details Part Number 5X00419G01 Model Ovation 5X00419G01 Voltage Rating 24 VDC Channels 16 Communication Protocol Ethernet Operating Temperature -20°C to +60°C Certifications IEC 61508 SIL2 Dimensions (L x W x H) 150 x 100 x 50 mm (5.91 x 3.94 x 1.97 in) Weight 0.19 kg (0.42 lbs)
$200.00 $100.00
-
EMERSON Emerson Ovation 5X00357G04 | 48VDC Enhanced Digital Input Module
Product Description The Emerson 5X00357G04 is a high-precision analog input module engineered to convert remote analog signals—such as voltage or current—into digital data for integration with Ovation control systems. Designed for industrial environments, this module delivers reliable signal acquisition with robust electrical isolation and flexible communication capabilities via RS-485/MODBUS RTU. Its hot-swappable design allows seamless maintenance without system downtime. Technical Specifications Input and Signal Conversion Input Types: Voltage ±10V, ±5V; Current 0–20 mA, 4–20 mA Resolution: 16-bit analog-to-digital conversion (ADC) Accuracy: ±0.1% of full scale (FS) Input Isolation: Channel-to-system isolation 1500 VAC Communication and Interface Communication Bus: RS-485 supporting MODBUS RTU Multi-module Daisy-Chaining: Supported for flexible system expansion Power and Environmental Operating Voltage: 48 VDC (on card input contact) Power Consumption: <5 W Operating Temperature: -20°C to +60°C Design and Features High-Density Signal Acquisition: Efficient processing of multiple analog inputs Hot-Swappable: Module replacement without system shutdown Industrial-Grade Reliability: Maintains signal integrity in harsh environments Applications Acquisition of analog signals for process monitoring in power generation, oil & gas, and water/wastewater systems Integration with Ovation EMOD systems for digital control and process automation Real-time monitoring and control where high accuracy and channel isolation are required FAQ Q: What signal types are supported by 5X00357G04?A: It supports voltage signals ±10V/±5V and current signals 0–20 mA and 4–20 mA. Q: Is the module hot-swappable?A: Yes, it allows replacement or maintenance without shutting down the control system. Q: How precise is the analog-to-digital conversion?A: The 16-bit ADC provides ±0.1% FS accuracy, suitable for high-precision applications. Q: Can multiple modules be connected together?A: Yes, RS-485 daisy-chaining supports multi-module setups for expanded system integration. Q: What environments is this module designed for?A: Designed for industrial applications, capable of operating in temperatures from -20°C to +60°C and with robust electrical isolation.
$200.00 $100.00
-
EMERSON Emerson 1X00569H01 PMOD Cavity Insert | Ovation CompactFlash Memory
Product Description The Emerson 1X00569H01 PMOD cavity insert is a rugged industrial-grade CompactFlash memory card engineered for seamless integration with Ovation control systems. Designed to operate reliably under extreme industrial conditions, this module provides secure, high-performance data storage and ensures uninterrupted system operation in critical applications. Technical Specifications Memory and Storage Capacity: 128 MB Memory Type: Industrial-grade CompactFlash Compatibility: Emerson Ovation automation and control systems Environmental Durability Operating Temperature: Extreme tolerance for high and low temperatures Shock Resistance: Designed to withstand mechanical shocks Vibration Resistance: Engineered for environments with continuous vibration Performance Features Industrial-Grade Reliability: Ensures consistent performance under harsh conditions Secure Data Retention: Protects critical system and operational data Seamless System Integration: Fully compatible with Emerson Ovation PMOD architecture Long-Term Durability: Suitable for demanding applications in power generation, oil and gas, and water treatment Applications Storage of configuration and operational data in Ovation DCS Replacement or upgrade of PMOD cavity inserts in harsh industrial settings Reliable memory solution for process control and monitoring systems FAQ Q: What is the storage capacity of the 1X00569H01?A: It provides 128 MB of industrial-grade CompactFlash memory. Q: Can it operate in extreme industrial conditions?A: Yes, it is designed to withstand high and low temperatures, vibration, and shock. Q: Is this memory card compatible with all Ovation systems?A: It is fully compatible with Emerson Ovation control systems using PMOD cavity architecture. Q: Can this module be used for long-term data retention?A: Yes, it is built for secure storage and reliable performance in critical industrial applications. Q: How does it compare to standard CompactFlash cards?A: Unlike standard CF cards, 1X00569H01 is industrial-grade, shock and vibration resistant, and specifically designed for Ovation control systems.
$200.00 $100.00
-
EMERSON Ovation 5X00109G02 8-Channel Analog Input Module | High-Performance Module
Product Description The Ovation 5X00109G02 is an advanced analog input module designed for high-performance control applications. It provides eight individually configurable input channels with fused protection and user-accessible jumpers, allowing each channel to operate with either field-powered or locally powered transmitters. The module incorporates active current limiting in two-wire mode, enhancing safety and signal integrity. Compatibility Compatible with Ovation releases 3.4.0 and later Compatible with Ovation 3.3.1 with patch OVA331063 installed Technical Specifications Signal and Channels Input Signal Range: 4–20 mA Number of Channels: 8 Channel Configuration: Field-powered or local-powered selectable via jumpers Current Limiting: Active in two-wire mode Electronics Modules Standard Electronics Module: 5X00106G01 Compatible Personality Modules: 5X00109G01 or 5X00109G02 Environmental and Performance Features High-performance design for accurate signal acquisition Fused protection for each channel to prevent damage from electrical faults Easy jumper access for flexible configuration Stable operation under standard industrial conditions Applications Process monitoring in power generation, oil and gas, and water treatment plants Integration with Ovation DCS for precise analog input processing Systems requiring high reliability and individually configurable channels FAQ Q: How many channels does the 5X00109G02 module support?A: This module supports eight input channels, each independently configurable. Q: Can it operate with both field-powered and locally powered transmitters?A: Yes, each channel can be individually set for either mode using user-accessible jumpers. Q: Is it compatible with older Ovation releases?A: It works with Ovation 3.4.0 and later, or 3.3.1 with patch OVA331063 installed. Q: What safety features are included?A: Each input channel includes fused protection, and two-wire mode features active current limiting. Q: How does this module compare to 5X00109G01?A: The 5X00109G02 provides the same functionality but includes updated compatibility with newer Ovation software releases and improved channel current limiting.
$200.00 $100.00
You have seen 48 out of 731 products