The Bently Nevada 3300 Series delivers precise rotor and machinery monitoring. Our inventory provides sensors, probes, and spare parts for both current and legacy systems.
Bently Nevada 3300 Series
-
Bently Nevada Bently Nevada 330101‑00‑53‑05‑02‑05 | 3300 XL Series | 8 mm Proximity Probe
Overview The Bently Nevada 330101‑00‑53‑05‑02‑05 proximity probe is part of the 3300 XL 8 mm sensing platform, engineered for precise shaft vibration and position measurement in fluid‑film bearing machinery. Its eddy‑current measurement technology provides stable, linear output across a wide operating range, making it suitable for both protection and diagnostic applications. Key Characteristics 8 mm probe tip optimized for standard API 670‑compliant installations 3/8‑24 UNF threaded body, non‑armored configuration 0.5 m integrated coaxial cable with ClickLoc miniature connector Designed for static position, dynamic vibration, and Keyphasor reference measurements Fully interchangeable components within the 3300 XL system Certified for hazardous locations (CSA, ATEX, IECEx) Manufactured in the USA with strict quality control Technical Specifications Parameter Specification Model / Part Number 330101‑00‑53‑05‑02‑05 Probe Type 3300 XL 8 mm Proximity Probe Thread Size 3/8‑24 UNF Minimum Case Length 5.3 in Cable Length 0.5 m (1.6 ft) Connector Type Miniature coaxial ClickLoc Measurement Principle Eddy‑current displacement Output Voltage proportional to probe‑target gap Target Material Conductive (typically 4140 steel) Weight 0.06 kg Dimensions 1.8 × 1.6 × 123 cm System Compatibility 3300 XL Proximity Transducer System Certifications CSA, ATEX, IECEx API 670 Compliance Yes Condition Brand New Origin USA MOQ 1 HS Code 8537101190 Functional Description The 330101‑00‑53‑05‑02‑05 probe operates as part of a three‑component transducer system consisting of the probe, extension cable, and Proximitor sensor. The probe generates a voltage output proportional to the distance between the probe tip and the rotating shaft surface, enabling accurate monitoring of: Shaft radial vibration Axial position Thermal growth Keyphasor phase reference Speed measurement The 8 mm probe design offers a well‑defined linear range suitable for most industrial rotating machinery. Its ClickLoc connector ensures secure electrical contact, while the non‑armored cable configuration supports installations in protected routing environments. Application Scenarios Steam and gas turbines Centrifugal compressors Industrial pumps Gearboxes and generators High‑speed rotating equipment requiring API‑compliant monitoring FAQ Q: Is the probe compatible with older 3300 systems? A: Yes. The 3300 XL series maintains backward compatibility when used with matched extension cables and Proximitor sensors. Q: What is the typical linear range of an 8 mm probe? A: The 8 mm probe typically provides a linear range of approximately 2 mm, depending on calibration and target material. Q: Can this probe be used for Keyphasor applications? A: Yes. The probe supports phase reference and speed measurement when paired with the appropriate Proximitor module.
$200.00 $100.00
-
Bently Nevada Bently Nevada 330500‑04‑01 | Velomitor Series | Piezo‑Velocity Sensor
Overview The Bently Nevada 330500‑04‑01 piezo‑velocity sensor is part of the Velomitor family, designed to measure absolute vibration on machine casings, bearing housings, and structural components. Its solid‑state piezoelectric architecture provides stable, drift‑free velocity output suitable for continuous condition monitoring and protection systems. Key Characteristics Piezoelectric velocity sensing element with no moving parts Direct measurement of casing vibration for diagnostics and protection Compatible with Bently Nevada monitoring platforms, including TSI systems Rugged construction for long‑term operation in harsh industrial environments Mounting flexibility: vertical, horizontal, or angled installation Manufactured in the USA with consistent quality control Technical Specifications Parameter Specification Model / Part Number 330500‑04‑01 Sensor Type Velomitor Piezo‑Velocity Sensor Measurement Type Absolute vibration (velocity) Mounting Thread 1/2‑20 UNF adapter Output Piezoelectric velocity signal Weight 0.55 kg Dimensions 20.5 × 22.4 × 3.3 cm Operating Status Active Minimum Order Quantity 1 Country of Origin USA HS Code 8537101190 System Compatibility TSI and Bently Nevada monitoring systems Condition Brand New Functional Description The 330500‑04‑01 sensor converts casing vibration into a proportional electrical signal using a solid‑state piezoelectric element. This design eliminates mechanical wear and ensures stable frequency response across a wide operating range. The sensor is optimized for detecting: Unbalance Misalignment Mechanical looseness Structural resonance Rotor‑to‑casing vibration transmission Its 1/2‑20 UNF mounting adapter allows secure attachment to bearing housings or machine frames. Proper mounting torque and surface preparation are essential to maintain accurate amplitude and frequency response. Application Scenarios Steam and gas turbines Centrifugal and axial compressors Industrial pumps Electric motors and generators Gearboxes and high‑speed rotating equipment FAQ Q: Does the sensor require a specific mounting orientation? A: No. The piezoelectric design supports installation in any orientation without affecting measurement accuracy. Q: What type of vibration does the sensor measure? A: It measures absolute casing vibration in velocity units, ideal for machinery protection and diagnostics. Q: Can it replace legacy velocity transducers? A: Yes. The solid‑state design offers improved reliability compared to moving‑coil velocity pickups.
$200.00 $100.00
-
Bently Nevada Bently Nevada | 330704-000-040-10-02-05 | 3300 XL 11 mm Proximity Probe
Overview The Bently Nevada 330704‑000‑040‑10‑02‑05 proximity probe is part of the 3300 XL 11 mm sensing platform, engineered for high‑accuracy shaft vibration and position measurement in fluid‑film bearing machinery. Its mechanical design, electrical characteristics, and environmental robustness make it suitable for continuous monitoring and protection systems in demanding industrial environments. Key Features 11 mm tip diameter for extended linear range and improved signal stability M14 × 1.5 threaded body with armored construction for mechanical protection Standard 1.0 m coaxial probe cable with ClickLoc miniature connector Compatible with 3300 XL extension cables and Proximitor sensors Designed for static position, dynamic vibration, and Keyphasor reference measurements Suitable for turbines, compressors, pumps, and high‑speed rotating equipment Manufactured in the USA with full compliance to global instrumentation standards Technical Specifications Parameter Specification Model / Part Number 330704‑000‑040‑10‑02‑05 Probe Type 3300 XL 11 mm Proximity Probe Thread Size M14 × 1.5 Minimum Unthreaded Length 0 mm Minimum Total Length 40 mm Cable Length 1.0 m (3.3 ft) Connector Type Miniature coaxial ClickLoc System Compatibility 3300 XL Proximity Transducer System Output Characteristics Voltage proportional to probe‑target gap Target Material Conductive (typically 4140 steel) Weight 0.16 kg HS Code 8537101190 Dimensions 2 × 2 × 119 cm Operating Status Active, not discontinued Origin USA Minimum Order Quantity 1 Functional Description The 330704‑000‑040‑10‑02‑05 probe operates as part of a three‑component transducer system consisting of the probe, extension cable, and Proximitor sensor. When installed, the probe generates a precise voltage output proportional to the distance between the probe tip and the rotating shaft surface. This enables accurate monitoring of: Shaft radial vibration Axial position Thermal growth Keyphasor phase reference Speed measurement The armored cable and ClickLoc connector ensure long‑term reliability in high‑temperature, high‑vibration, or oil‑contaminated environments. The probe’s 11 mm design provides a wider linear range compared to 5 mm or 8 mm probes, making it ideal for large‑shaft or high‑displacement applications. Application Scenarios Steam and gas turbines Centrifugal compressors Industrial pumps Gearboxes and generators High‑speed rotating machinery requiring API‑670 compliant monitoring FAQ Q: Can this probe be used with older 3300 systems? A: Yes. The 3300 XL series maintains backward compatibility with legacy 3300 extension cables and Proximitor sensors when installed as a matched set. Q: What is the typical linear range of an 11 mm probe? A: The 11 mm probe typically provides a linear range of approximately 4 mm, depending on the target material and system calibration. Q: Is the probe suitable for Keyphasor applications? A: Yes. The probe supports phase reference and speed measurement when paired with the appropriate Proximitor module.
$200.00 $100.00
-
Bently Nevada Bently Nevada 330103‑00‑17‑10‑02‑CN | 3300 XL Series | 8 mm Proximity Probe
Overview The Bently Nevada 330103‑00‑17‑10‑02‑CN proximity probe is part of the 3300 XL 8 mm transducer family, engineered for high‑accuracy shaft vibration and position measurement in fluid‑film bearing machinery. Built with a stainless‑steel housing and an M10 × 1 threaded configuration, this model provides stable performance in demanding industrial environments while maintaining full compatibility with the 3300 XL monitoring platform. Key Characteristics 8 mm eddy‑current probe for displacement and vibration monitoring M10 × 1 threaded stainless‑steel body with 17 mm case length Integrated 1.0‑meter coaxial cable with ClickLoc miniature connector Wide operating temperature range: −52°C to +177°C (extendable to +218°C with ETR components) Lightweight construction for simplified installation Fully compatible with all 3300 XL proximity transducer components Suitable for both static position and dynamic vibration measurement Technical Specifications Parameter Specification Model / Part Number 330103‑00‑17‑10‑02‑CN Probe Type 3300 XL 8 mm Proximity Probe Thread Size M10 × 1 Case Length 17 mm Cable Length 1.0 m Connector Type Miniature coaxial ClickLoc Operating Temperature −52°C to +177°C (up to +218°C with ETR) Measurement Principle Eddy‑current displacement Output Voltage proportional to probe‑target gap Weight 0.06 kg Dimensions 1.8 × 1.6 × 123 cm System Compatibility 3300 XL Proximity Transducer System Condition Brand New Origin USA MOQ 1 HS Code 8537101190 Functional Description The 330103‑00‑17‑10‑02‑CN probe is designed to deliver precise displacement and vibration measurements for rotating machinery. Its stainless‑steel housing and compact mechanical profile support installation in confined or high‑density equipment layouts. The integrated 1‑meter cable eliminates the need for a separate extension cable in many applications, simplifying installation and reducing potential failure points. The probe’s sensing element generates a voltage proportional to the distance between the probe tip and the conductive target surface, enabling accurate monitoring of: Shaft radial vibration Axial position Thermal growth Keyphasor phase reference Its wide temperature capability and rugged construction make it suitable for turbines, compressors, pumps, and other critical assets operating in harsh industrial environments. The probe maintains full electrical and mechanical compatibility with all 3300 XL components, ensuring seamless integration into existing systems without requiring matched sets or recalibration. Application Scenarios Steam and gas turbines Centrifugal compressors Industrial pumps and fans Gearboxes and generators Machinery requiring high‑temperature probe operation FAQ Q: What does the “CN” suffix indicate It identifies a configuration tailored for regional installation requirements while maintaining full 3300 XL compatibility. Q: Can this probe be used in high‑temperature environments Yes. It supports up to +177°C, and up to +218°C when used with ETR components. Q: Is this probe compatible with older 3300 systems Yes. It integrates seamlessly with both XL and legacy 3300 components.
$200.00 $100.00
-
Bently Nevada Bently Nevada 330106‑05‑30‑10‑02‑05‑05 Proximity Transducer
Overview The Bently Nevada 330106‑05‑30‑10‑02‑05‑05 proximity transducer is part of the 3300 XL 8 mm system, designed to deliver accurate static and dynamic displacement measurements for fluid‑film bearing machinery. This assembly integrates an 8 mm probe, a matched extension cable, and a Proximitor sensor, providing a complete solution for shaft vibration, axial position, and Keyphasor reference monitoring. Key Characteristics Complete 8 mm proximity transducer assembly Measures static position, dynamic vibration, and phase reference signals Reverse‑mount probe configuration for installations with limited front‑side access 3/8‑24 UNF threaded housing with armored cable protection 5.0‑inch case length and 1.0‑meter total probe length Designed for harsh industrial environments with high vibration and temperature exposure Fully compatible with the 3300 XL Proximity Transducer System Technical Specifications Parameter Specification Model / Part Number 330106‑05‑30‑10‑02‑05‑05 Product Type 3300 XL 8 mm Proximity Transducer Probe Thread 3/8‑24 UNF Probe Case Length 5.0 in Total Probe Length 1.0 m Cable Type Armored Measurement Principle Eddy‑current displacement Output Voltage proportional to probe‑target gap System Compatibility 3300 XL Proximity Transducer System Weight 0.55 kg Dimensions 20.5 × 22.4 × 3.3 cm Condition Brand New Origin USA MOQ 1 HS Code 8537101190 Functional Description The 330106‑05‑30‑10‑02‑05‑05 proximity transducer is engineered for high‑accuracy monitoring of rotating machinery equipped with fluid‑film bearings. Its reverse‑mount probe design allows installation from the rear of the mounting surface, making it suitable for confined or obstructed locations. The armored cable enhances mechanical durability, protecting the assembly from abrasion, vibration, and routing stress. The transducer provides a linear voltage output proportional to the distance between the probe tip and the conductive shaft surface, enabling precise monitoring of: Shaft radial vibration Axial position Thermal growth Keyphasor phase reference Speed measurement This model is suitable for both new installations and system upgrades, offering full compatibility with existing 3300 XL components. Application Scenarios Steam and gas turbines Centrifugal compressors Industrial pumps and fans Gearboxes and generators Machinery requiring reverse‑mount probe installation FAQ Q: What is the benefit of a reverse‑mount probe? It allows installation from behind the mounting surface, ideal for tight or obstructed locations. Q: Is this transducer compatible with older 3300 systems? Yes. It integrates seamlessly with the 3300 XL platform and supports backward compatibility. Q: What measurements can this transducer support? It measures vibration, shaft position, Keyphasor phase, and speed when paired with the appropriate Proximitor sensor.
$200.00 $100.00
-
Bently Nevada Bently Nevada 330130‑085‑10‑05 Standard Extension Cable
Overview The Bently Nevada 330130‑085‑10‑05 is an 8.5‑meter standard extension cable designed for use with the 3300 XL Proximity Transducer System. Engineered for high‑temperature, high‑vibration, and hazardous‑area environments, the cable ensures stable signal transmission between 8 mm proximity probes and Proximitor sensors. Its rugged construction and controlled electrical characteristics support accurate displacement and vibration measurements in critical rotating machinery. Key Characteristics 8.5‑meter triaxial extension cable for 3300 XL systems FluidLoc PFA‑insulated construction for high‑temperature and oil‑resistant performance Maintains 75‑ohm characteristic impedance for accurate eddy‑current measurements Armored design for mechanical protection in harsh industrial environments Certified for ATEX, IECEx, and CSA hazardous‑area installations Compatible with 8 mm probes and standard 3300 XL Proximitor sensors Technical Specifications Parameter Specification Model / Part Number 330130‑085‑10‑05 Cable Type 3300 XL Standard Extension Cable Length 8.5 m Impedance 75 Ω triaxial Capacitance ~69.9 pF/m Insulation PFA FluidLoc high‑temperature insulation Temperature Range −35°C to +200°C Construction Armored for mechanical protection Certifications ATEX, IECEx, CSA Weight 1.48 kg Dimensions 28 × 26 × 6 cm System Compatibility 3300 XL Proximity Transducer System Condition Brand New Origin USA MOQ 1 HS Code 8537101190 Functional Description The 330130‑085‑10‑05 extension cable is engineered to maintain signal integrity over long distances in demanding industrial environments. Its 75‑ohm triaxial design ensures proper impedance matching with 3300 XL Proximitor sensors, minimizing signal distortion and preserving measurement accuracy. The cable features FluidLoc insulation, which prevents oil and fluid migration through the cable interior—an essential requirement for lubrication‑rich environments such as turbines, compressors, and gearboxes. Its armored construction provides additional protection against abrasion, mechanical impact, and routing stress. When paired with 3300 XL 8 mm probes, the cable supports accurate displacement and vibration monitoring for machinery protection systems. While compatible with legacy 3300 components, mixing XL and non‑XL parts may limit performance to older specifications. Application Scenarios Steam and gas turbines Centrifugal compressors Industrial pumps and fans Gearboxes and generators High‑temperature or hazardous‑area installations Long‑distance probe‑to‑monitor routing FAQ Q: Can this cable be used with non‑XL 3300 components Yes, but performance will match the older 3300 specifications rather than full XL capability. Q: What advantage does FluidLoc insulation provide It prevents oil migration through the cable, improving long‑term reliability in lubrication‑rich environments. Q: Is the cable suitable for hazardous locations Yes. It carries ATEX, IECEx, and CSA certifications.
$200.00 $100.00
-
Bently Nevada Bently Nevada 330101‑00‑12‑20‑12‑CN | 3300 XL Series | 8 mm Proximity Probe
Overview The Bently Nevada 330101‑00‑12‑20‑12‑CN proximity probe is part of the 3300 XL 8 mm transducer family, engineered for high‑accuracy shaft vibration and position measurement in fluid‑film bearing machinery. This model is built to meet regional configuration requirements while maintaining full compatibility with the global 3300 XL platform. Its durable mechanical design and stable electrical characteristics ensure dependable performance in harsh industrial environments. Key Characteristics 8 mm eddy‑current probe for displacement and vibration monitoring 3/8‑24 UNF threaded stainless‑steel housing Minimum unthreaded length: 0 in Case length: 1.2 in Integrated 2.0‑meter coaxial cable for flexible installation FluidLoc cable construction for oil‑resistant performance Miniature ClickLoc connector for secure electrical connection Fully interchangeable with all 3300 XL and legacy 3300 5 mm / 8 mm components Technical Specifications Parameter Specification Model / Part Number 330101‑00‑12‑20‑12‑CN Probe Type 3300 XL 8 mm Proximity Probe Thread Size 3/8‑24 UNF Minimum Unthreaded Length 0 in Case Length 1.2 in Cable Length 2.0 m Cable Type FluidLoc oil‑resistant cable Connector Type Miniature coaxial ClickLoc Measurement Principle Eddy‑current displacement Calibration Factory‑set for AISI 4140 steel (other materials optional) Weight 0.06 kg Dimensions 1.8 × 1.6 × 123 cm System Compatibility 3300 XL Proximity Transducer System Condition Brand New Origin USA MOQ 1 HS Code 8537101190 Functional Description The 330101‑00‑12‑20‑12‑CN probe is designed for precise vibration and shaft position measurement in rotating machinery. Its 2‑meter cable provides installation flexibility, allowing the probe to be positioned optimally without compromising signal quality. The FluidLoc cable construction prevents oil migration through the cable interior, making it suitable for lubrication‑rich environments such as turbines and compressors. The probe maintains the required side‑view clearances and tip‑to‑tip spacing associated with 8 mm probes, ensuring compatibility with standard mounting geometries. Its ClickLoc connector provides a secure, vibration‑resistant electrical interface, reducing the risk of accidental disconnection. As part of the 3300 XL system, the probe is fully interchangeable with extension cables and Proximitor sensors, eliminating the need for matched components or bench calibration. This simplifies installation, maintenance, and system upgrades. Application Scenarios Steam and gas turbines Centrifugal compressors Industrial pumps and fans Gearboxes and generators Machinery requiring standard 8 mm probe spacing FAQ Q: What does the “CN” suffix indicate It denotes a configuration tailored for regional installation requirements while maintaining full 3300 XL compatibility. Q: Is this probe compatible with older 3300 systems Yes. It is fully interchangeable with both XL and non‑XL 3300 5 mm and 8 mm components. Q: What advantage does the FluidLoc cable provide It prevents oil migration through the cable, improving long‑term reliability in lubrication‑rich environments.
$200.00 $100.00
-
Bently Nevada Bently Nevada 330701‑00‑30‑10‑02‑05 11 mm Proximity Probe
Overview The Bently Nevada 330701‑00‑30‑10‑02‑05 proximity probe is a long‑range 11 mm sensor designed for the 3300 XL Proximity Transducer System. With a 30‑meter integrated cable and a wide operating temperature range, it is engineered for installations requiring extended cable routing and high environmental resilience. Its mechanical robustness and stable electrical characteristics make it suitable for continuous monitoring of critical rotating machinery. Key Characteristics 11 mm eddy‑current probe for displacement and vibration measurement Extended 30‑meter cable for long‑distance installations Wide operating and storage temperature range: −52°C to +177°C Viton O‑ring sealing for differential pressure containment Gold‑plated brass ClickLoc connectors for secure electrical connections TipLoc molded probe tip for enhanced mechanical strength CableLoc reinforcement providing 330 N pull strength Optional FluidLoc cable to prevent oil migration Suitable for harsh industrial and hazardous environments Technical Specifications Parameter Specification Model / Part Number 330701‑00‑30‑10‑02‑05 Probe Type 3300 XL 11 mm Proximity Probe Cable Length 30 m Thread Size 1/2‑20 UNF Temperature Range −52°C to +177°C (operation & storage) Sealing Viton O‑ring Connector Type Gold‑plated brass ClickLoc Probe Technologies TipLoc molded tip, CableLoc cable retention Optional Features FluidLoc oil‑resistant cable, connector protectors Weight 0.06 kg Dimensions 1.8 × 1.6 × 123 cm System Compatibility 3300 XL Proximity Transducer System Condition Brand New Origin USA MOQ 1 HS Code 8537101190 Functional Description The 330701‑00‑30‑10‑02‑05 probe is engineered for applications requiring long cable runs, such as large turbine decks, compressor skids, and remote bearing housings. Its 30‑meter cable maintains signal integrity over extended distances, while the ClickLoc connector ensures a secure, vibration‑resistant electrical interface. The probe incorporates several Bently Nevada proprietary technologies: TipLoc: A molded probe‑tip design that permanently bonds the tip to the probe body. CableLoc: A high‑strength cable retention system capable of withstanding 330 N of pull force. FluidLoc (optional): Prevents oil migration through the cable interior, ideal for lubrication‑rich environments. The Viton O‑ring provides sealing against differential pressures between the probe tip and machine casing. Pressure‑tested configurations are available upon request. This model is designed for use in high‑temperature, high‑vibration, and moisture‑prone environments, making it suitable for critical machinery protection systems across power generation, oil & gas, and heavy industrial sectors. Application Scenarios Steam and gas turbines Centrifugal and axial compressors Large industrial pumps Gearboxes and generators Installations requiring long‑distance probe routing FAQ Q: Why choose an 11 mm probe over smaller sizes It provides a wider linear range, ideal for large‑shaft or high‑displacement applications. Q: Is this probe suitable for high‑temperature environments Yes. It operates reliably from −52°C to +177°C. Q: What is the benefit of FluidLoc cable construction It prevents oil migration through the cable, improving long‑term reliability in lubrication‑rich environments.
$200.00 $100.00
-
Bently Nevada Bently Nevada 330101‑00‑09‑10‑02‑05 | 3300 XL Series | 8 mm Proximity Probe
Overview The Bently Nevada 330101‑00‑09‑10‑02‑05 proximity probe is part of the 3300 XL 8 mm eddy‑current transducer system, engineered for precise shaft vibration and position measurement in fluid‑film bearing machinery. Its compact mechanical design and stable electrical characteristics make it suitable for continuous monitoring in demanding industrial environments. Key Characteristics 8 mm eddy‑current probe for displacement and vibration monitoring Designed for use with 3300 XL extension cables and Proximitor sensors Optional connector protectors available for enhanced environmental sealing Lightweight construction for easy installation in confined spaces Fully interchangeable with 3300 XL and legacy 3300 5 mm / 8 mm components Suitable for high‑vibration, high‑temperature industrial applications Technical Specifications Parameter Specification Model / Part Number 330101‑00‑09‑10‑02‑05 Probe Type 3300 XL 8 mm Proximity Probe Thread Size Standard 3300 XL probe threading Cable Length 1.0 m (3.3 ft) Cable Type Unarmored coaxial cable Connector Type Miniature coaxial ClickLoc Measurement Principle Eddy‑current displacement Environmental Protection Optional connector protectors Weight 0.06 kg Dimensions 1.8 × 1.6 × 123 cm System Compatibility 3300 XL Proximity Transducer System Condition Brand New Origin USA MOQ 1 HS Code 8537101190 Functional Description The 330101‑00‑09‑10‑02‑05 probe is engineered to deliver accurate displacement and vibration measurements across a wide operating range. Its compact design supports installation in tight or high‑density machinery layouts. The probe can be supplied with pre‑installed connector protectors to shield electrical connections from moisture, dust, and contaminants—an important feature for harsh industrial environments. Connector protectors may also be ordered separately for field installations, especially when cables must be routed through narrow conduits or complex pathways. These accessories help maintain long‑term signal integrity and reduce maintenance requirements. The probe is fully compatible with 3300 XL extension cables and Proximitor sensors, ensuring stable performance without requiring matched components or bench calibration. Application Scenarios Steam and gas turbines Centrifugal compressors Industrial pumps and fans Gearboxes and generators Machinery requiring compact probe installation FAQ Q: Are connector protectors required for all installations They are recommended for environments with moisture, dust, or contaminants to ensure long‑term signal reliability. Q: Is this probe compatible with older 3300 systems Yes. It is fully interchangeable with both XL and non‑XL 3300 5 mm and 8 mm components. Q: Does the probe require calibration No. Calibration is performed at the Proximitor sensor level, not the probe.
$200.00 $100.00
-
Bently Nevada Bently Nevada 330103‑00‑15‑10‑02‑CN | 3300 XL Series | 8 mm Proximity Probe
Overview The Bently Nevada 330103‑00‑15‑10‑02‑CN proximity probe is part of the 3300 XL 8 mm eddy‑current transducer system, engineered for precise shaft vibration and position measurement in fluid‑film bearing machinery. This model is designed to meet regional installation requirements while maintaining full compatibility with the global 3300 XL platform. Its stable electrical characteristics and rugged mechanical design ensure long‑term reliability in demanding industrial environments. Key Characteristics 8 mm eddy‑current probe for displacement and vibration monitoring M10 × 1 threaded stainless‑steel housing Minimum unthreaded length: 0 mm Case length: 140 mm 1.0‑meter integrated coaxial cable with ClickLoc miniature connector Fully compliant with API 670 mechanical and performance requirements Interchangeable with all 3300 XL and legacy 3300 5 mm / 8 mm components Designed for regional (CN) specifications while maintaining global performance standards Technical Specifications Parameter Specification Model / Part Number 330103‑00‑15‑10‑02‑CN Probe Type 3300 XL 8 mm Proximity Probe Thread Size M10 × 1 Minimum Unthreaded Length 0 mm Case Length 140 mm Cable Length 1.0 m Connector Type Miniature coaxial ClickLoc Measurement Principle Eddy‑current displacement Calibration Factory‑set for AISI 4140 steel (other materials optional) Weight 0.06 kg Dimensions 1.8 × 1.6 × 123 cm System Compatibility 3300 XL Proximity Transducer System Condition Brand New Origin USA MOQ 1 HS Code 8537101190 Functional Description The 330103‑00‑15‑10‑02‑CN probe is engineered to deliver accurate displacement and vibration measurements across a wide operating range. As part of the 3300 XL system, it forms a matched transducer assembly with an extension cable and Proximitor sensor, ensuring stable performance without requiring component matching or bench calibration. The probe complies with API 670 requirements for: Mechanical configuration Linear range Sensitivity Temperature stability Its 1.0‑meter cable and compact mechanical dimensions support installation in confined or high‑density machinery layouts. The ClickLoc connector ensures secure electrical contact and reduces the risk of accidental disconnection. This model is suitable for both standard vibration monitoring and overspeed protection applications when paired with the appropriate Proximitor sensor. Application Scenarios Steam and gas turbines Centrifugal compressors Industrial pumps and fans Gearboxes and generators Machinery requiring API 670‑compliant monitoring FAQ Q: What does the “CN” suffix indicate? A: It denotes a configuration tailored for regional installation requirements while maintaining full 3300 XL performance. Q: Is this probe compatible with older 3300 systems? A: Yes. It is fully interchangeable with both XL and non‑XL 3300 5 mm and 8 mm components. Q: Can the probe be calibrated for different shaft materials? A: Yes. Custom calibration is available upon request.
$200.00 $100.00
-
Bently Nevada Bently Nevada 330103‑00‑05‑20‑02‑00 | 3300 XL Series | 8 mm Proximity Probe
Overview The Bently Nevada 330103‑00‑05‑20‑02‑00 proximity probe is part of the 3300 XL 8 mm transducer system, engineered for precise shaft vibration and position measurement in fluid‑film bearing machinery. This model features an M10 × 1 threaded housing, a compact mechanical profile, and a 2‑meter integrated cable, making it suitable for a wide range of industrial monitoring applications. Key Characteristics 8 mm eddy‑current probe for displacement and vibration monitoring M10 × 1 stainless‑steel threaded body, non‑armored configuration Minimum unthreaded length: 0 mm Minimum case length: 50 mm 2.0‑meter coaxial cable with ClickLoc miniature connector Optional FluidLoc cable for oil‑rich environments Locknut with pre‑drilled safety‑wire holes for secure installation Factory‑calibrated for AISI 4140 steel; alternative calibration available Technical Specifications Parameter Specification Model / Part Number 330103‑00‑05‑20‑02‑00 Probe Type 3300 XL 8 mm Proximity Probe Thread Size M10 × 1 Minimum Unthreaded Length 0 mm Minimum Case Length 50 mm Cable Length 2.0 m (6.6 ft) Cable Type Standard coaxial; optional FluidLoc Connector Type Miniature coaxial ClickLoc Measurement Principle Eddy‑current displacement Calibration Factory‑set for AISI 4140 steel Weight 0.08 kg Dimensions 1.8 × 1.5 × 113 cm System Compatibility 3300 XL Proximity Transducer System Condition Brand New Origin USA MOQ 1 HS Code 8537101190 Functional Description The 330103‑00‑05‑20‑02‑00 probe is designed for accurate displacement and vibration measurement in rotating machinery. Its non‑armored configuration is ideal for installations where cable routing is protected or enclosed. The 2‑meter cable provides flexibility for medium‑distance installations, while the ClickLoc connector ensures secure electrical contact. Optional FluidLoc cable construction prevents oil migration through the cable interior, making the probe suitable for lubrication‑rich environments such as turbines and compressors. Connector protectors are recommended for humid or moisture‑prone installations. The probe is factory‑calibrated for AISI 4140 steel, the standard target material for Bently Nevada systems. Calibration for alternative shaft materials is available upon request to ensure measurement accuracy. This model supports both standard vibration monitoring and overspeed protection applications when paired with the appropriate Proximitor sensor. Application Scenarios Steam and gas turbines Centrifugal compressors Industrial pumps and fans Gearboxes and generators Overspeed and tachometer monitoring (with proper configuration) FAQ Q: Can this probe be used in oil‑exposed environments? A: Yes, but the optional FluidLoc cable is recommended for oil‑rich applications. Q: Is the probe compatible with older 3300 systems? A: Yes. It is fully interchangeable with both XL and non‑XL 3300 5 mm and 8 mm components. Q: Can the probe be calibrated for materials other than AISI 4140? A: Yes. Custom calibration is available upon request.
$200.00 $100.00
-
Bently Nevada Bently Nevada 330101‑00‑37‑05‑02‑05 | 3300 XL Series | 8 mm Armored Proximity Probe
Overview The Bently Nevada 330101‑00‑37‑05‑02‑05 is a long‑distance, armored 8 mm proximity probe designed for demanding vibration and position monitoring applications. With a 37‑meter integrated armored cable, this probe is engineered for installations requiring extended routing distances while maintaining signal integrity. It is fully compatible with both 3300 XL and legacy 3300 transducer systems, ensuring seamless integration into existing machinery protection architectures. Key Characteristics 8 mm eddy‑current probe with extended 37 m armored cable Designed for long‑distance signal transmission in harsh industrial environments TipLoc molding technology for enhanced probe‑tip durability CableLoc reinforcement providing 330 N pull strength Compatible with XL and non‑XL 3300 5 mm / 8 mm components Optional FluidLoc cable construction available for oil‑rich environments Suitable for high‑vibration and high‑temperature machinery applications Technical Specifications Parameter Specification Model / Part Number 330101‑00‑37‑05‑02‑05 Probe Type 3300 XL 8 mm Proximity Probe Cable Length 37 m (armored) Cable Protection Armored; optional FluidLoc oil‑resistant design Connector Type Miniature coaxial ClickLoc Mounting Pattern Standard 4‑hole pattern (with mounting base) Probe Technologies TipLoc molded tip, CableLoc reinforced cable Measurement Principle Eddy‑current displacement Interchangeability XL and non‑XL 3300 5 mm / 8 mm systems Weight 0.06 kg Dimensions 1.8 × 1.6 × 123 cm System Compatibility 3300 XL Proximity Transducer System Condition Brand New Origin USA MOQ 1 HS Code 8537101190 Functional Description The 330101‑00‑37‑05‑02‑05 probe is engineered for installations where long cable runs are required, such as large machinery skids, remote bearing housings, or equipment with complex routing paths. Its armored cable construction provides mechanical protection against abrasion, vibration, and physical impact. The probe incorporates two key Bently Nevada technologies: TipLoc – A molded probe‑tip design that ensures a strong, permanent bond between the tip and probe body. CableLoc – A high‑strength cable retention system capable of withstanding 330 N of pull force. These features significantly improve durability and reliability in harsh industrial environments. The probe is fully interchangeable with both XL and non‑XL 3300 components, eliminating the need for matched sets or bench calibration. Optional FluidLoc cable construction prevents oil migration through the cable, making it suitable for lubrication‑rich environments such as turbines and compressors. Application Scenarios Large rotating machinery requiring long cable routing Steam and gas turbines Centrifugal compressors Gearboxes and industrial pumps Machinery protection systems in oil & gas, power generation, and heavy manufacturing FAQ Q: Can this probe be used with older 3300 systems? A: Yes. It is fully compatible with both XL and non‑XL 3300 5 mm and 8 mm components. Q: Is the silicone tape suitable for oil‑exposed environments? A: No. Silicone tape is included for general protection but is not recommended for turbine‑oil environments. FluidLoc cable is preferred in such cases. Q: What makes this probe suitable for long‑distance installations? A: Its 37‑meter armored cable maintains signal integrity and provides mechanical protection over extended routing paths.
$200.00 $100.00
-
Bently Nevada Bently Nevada 330103‑00‑05‑10‑02‑05 | 3300 XL Series | 8 mm Proximity Probe
Overview The Bently Nevada 330103‑00‑05‑10‑02‑05 proximity probe is part of the 3300 XL 8 mm transducer system, engineered for precise shaft vibration and position measurement in fluid‑film bearing machinery. Its durable mechanical construction, stable electrical characteristics, and compatibility with global 3300 XL components make it a reliable choice for continuous machinery protection applications. Key Characteristics 8 mm eddy‑current probe for displacement and vibration monitoring M10 × 1 threaded stainless‑steel housing 1.0‑meter integrated coaxial cable Miniature ClickLoc connector for secure, vibration‑resistant connections Gold‑plated connector contacts for corrosion resistance Fully compatible with 3300 XL extension cables and Proximitor sensors Meets CSA, ATEX, and IECEx hazardous‑area certifications Suitable for high‑temperature, high‑vibration industrial environments Technical Specifications Parameter Specification Model / Part Number 330103‑00‑05‑10‑02‑05 Probe Type 3300 XL 8 mm Proximity Probe Thread Size M10 × 1 Cable Length 1.0 m (3.3 ft) Cable Type Unarmored coaxial cable Connector Type Miniature coaxial ClickLoc Measurement Principle Eddy‑current displacement Output Voltage proportional to probe‑target gap Certifications CSA, ATEX, IECEx Weight 0.06 kg Dimensions 1.8 × 1.6 × 123 cm System Compatibility 3300 XL Proximity Transducer System Condition Brand New Origin USA MOQ 1 HS Code 8537101190 Functional Description The 330103‑00‑05‑10‑02‑05 probe is designed to deliver accurate displacement and vibration measurements for rotating machinery. Its M10 × 1 threaded housing supports secure installation, while the ClickLoc connector ensures a reliable electrical interface that resists loosening under vibration. The probe’s sensing element produces a voltage proportional to the distance between the probe tip and the conductive target surface, enabling precise monitoring of: Shaft radial vibration Axial position Thermal growth Keyphasor phase reference Gold‑plated connector contacts enhance corrosion resistance, ensuring long‑term signal integrity. The probe is lightweight and easy to install, making it suitable for both new installations and system upgrades. Application Scenarios Steam and gas turbines Centrifugal compressors Industrial pumps and fans Gearboxes and generators Machinery requiring compact 8 mm probe installation FAQ Q: Does this probe require a specific Proximitor sensor? Yes. It is designed for use with 3300 XL Proximitor sensors for optimal performance. Q: Can this probe be used in hazardous environments? Yes. It meets CSA, ATEX, and IECEx certifications. Q: Is the connector resistant to vibration? The ClickLoc connector includes a locking mechanism that prevents loosening during operation.
$200.00 $100.00
-
Bently Nevada Bently Nevada 330930‑060‑04‑05 | 3300 NSv Series | Extension Cable
Overview The Bently Nevada 330930‑060‑04‑05 extension cable is part of the 3300 NSv (Narrow Side‑View) Proximity Transducer System, engineered for machinery where limited mounting space or small shaft diameters prevent the use of standard 5 mm or 8 mm probes. This 6‑meter armored cable ensures stable, noise‑resistant signal transmission between NSv proximity probes and Proximitor sensors, supporting accurate vibration and position monitoring in demanding industrial environments. Key Characteristics 6.0‑meter extension cable designed specifically for 3300 NSv systems Stainless‑steel armored construction with FEP jacket for chemical and mechanical protection Gold‑plated brass ClickLoc connectors for secure, vibration‑resistant mating CableLoc retention system rated to 220 N pull strength Suitable for compact machinery and small‑target applications Backward‑compatible with earlier 3300 RAM probe systems Supports radial vibration, axial position, and small‑target displacement measurements Technical Specifications Parameter Specification Model / Part Number 330930‑060‑04‑05 Product Type 3300 NSv Extension Cable Cable Length 6.0 m (19.7 ft) Armor Stainless steel Jacket Material FEP Connector Type Gold‑plated ClickLoc Cable Retention CableLoc, 220 N pull strength System Compatibility 3300 NSv Proximity Transducer System Weight 0.55 kg Dimensions 20.5 × 22.4 × 3.3 cm Condition Brand New Origin USA MOQ 1 HS Code 8537101190 Functional Description The 330930‑060‑04‑05 cable is engineered to maintain high‑quality signal transmission in installations requiring precise alignment between probe and Proximitor sensor. Its stainless‑steel armor and FEP jacket provide strong resistance to chemicals, abrasion, and mechanical stress, making it suitable for compressors, refrigeration systems, and process gas machinery. The ClickLoc connector design ensures a secure, slip‑resistant connection that withstands vibration and thermal cycling. The CableLoc retention system reinforces the mechanical bond between the cable and probe assembly, supporting up to 220 N of pull force. This cable is optimized for the 3300 NSv system, which is used when standard 5 mm or 8 mm probes cannot be installed due to space limitations or small shaft diameters. It is also compatible with earlier 3300 RAM probe systems, offering flexibility for system upgrades and mixed installations. Application Scenarios Centrifugal compressors Refrigeration compressors Process gas compressors Machinery with limited mounting space Small‑diameter shaft vibration monitoring Chemical and high‑vibration industrial environments FAQ Q: Can this cable be used with standard 3300 XL 5 mm or 8 mm probes No. It is designed specifically for the 3300 NSv system, which uses different electrical characteristics. Q: Is the cable suitable for corrosive or chemical environments Yes. The FEP jacket and stainless‑steel armor provide strong chemical resistance. Q: Does this cable support older 3300 RAM probes Yes. It is backward‑compatible with earlier RAM probe and cable assemblies.
$200.00 $100.00
-
Bently Nevada Bently Nevada 330101‑00‑41‑15‑12‑05 | 3300 XL Series | 8 mm Proximity Probe
Overview The Bently Nevada 330101‑00‑41‑15‑12‑05 proximity probe is part of the 3300 XL 8 mm transducer system, engineered for high‑accuracy shaft vibration and position measurement in fluid‑film bearing machinery. Designed to meet API 670 (4th Edition) requirements, this probe delivers stable, linear, and repeatable performance in demanding industrial environments. Key Characteristics 8 mm eddy‑current probe for displacement and vibration monitoring Fully compliant with API 670 mechanical and performance criteria Suitable for static position, dynamic vibration, Keyphasor, and speed measurement Interchangeable with all 3300 XL extension cables and Proximitor sensors Backward‑compatible with legacy 3300 5 mm and 8 mm components FluidLoc cable construction for oil‑resistant performance Miniature ClickLoc connector for secure, vibration‑resistant mating Certified for hazardous‑area use (CSA, ATEX, IECEx) Technical Specifications Parameter Specification Model / Part Number 330101‑00‑41‑15‑12‑05 Probe Type 3300 XL 8 mm Proximity Probe Thread Size 3/8‑24 UNF Case Length 1.5 m Cable Length 1.2 m Cable Type FluidLoc oil‑resistant cable Connector Type Miniature coaxial ClickLoc Measurement Principle Eddy‑current displacement Output Voltage proportional to probe‑target gap Certifications CSA, ATEX, IECEx Weight 0.06 kg Dimensions 1.8 × 1.6 × 123 cm System Compatibility 3300 XL Proximity Transducer System Condition Brand New Origin USA MOQ 1 HS Code 8537101190 Functional Description The 330101‑00‑41‑15‑12‑05 probe is engineered to provide accurate displacement and vibration measurements across a wide operating range. Its sensing element produces a voltage proportional to the distance between the probe tip and the conductive target surface, enabling precise monitoring of shaft behavior in rotating machinery. The probe’s FluidLoc cable prevents oil migration through the cable interior, improving long‑term reliability in lubrication‑rich environments. The ClickLoc connector ensures a secure electrical interface that resists loosening under vibration, while maintaining low contact resistance. As part of the 3300 XL system, the probe is fully interchangeable with extension cables and Proximitor sensors, eliminating the need for matched components or field calibration. Its backward compatibility with earlier 3300 series components simplifies system upgrades and mixed installations. Application Scenarios Steam and gas turbines Centrifugal compressors Industrial pumps and fans Gearboxes and generators Machinery requiring API 670‑compliant monitoring FAQ Q: Is this probe compatible with older 3300 series components Yes. It is fully backward‑compatible with non‑XL 5 mm and 8 mm probes, cables, and sensors. Q: What advantage does FluidLoc cable provide It prevents oil migration through the cable, improving reliability in lubrication‑rich environments. Q: Does this probe require matched calibration with its extension cable No. All 3300 XL components are factory‑calibrated for interchangeability.
$200.00 $100.00
-
Bently Nevada Bently Nevada 330101‑00‑13‑15‑12‑CN 3300 XL Proximity Probe
Overview The Bently Nevada 330101‑00‑13‑15‑12‑CN proximity probe is part of the 3300 XL 8 mm transducer family, engineered for precise non‑contact measurement of shaft vibration and displacement in rotating machinery. Its compact mechanical design and stable electrical characteristics make it suitable for installations where space is limited but high‑accuracy monitoring is required. Design and Construction This probe uses a 3/8‑24 UNF threaded body and includes a 1.5‑meter molded cable equipped with a miniature coaxial ClickLoc connector. The ClickLoc mechanism prevents accidental loosening and maintains shielding integrity, ensuring consistent signal transmission even in electrically noisy environments. The 330101‑00‑13‑15‑12‑CN features a non‑armored configuration with a short case length, allowing installation in tight mounting locations without compromising measurement accuracy. The FluidLoc cable design provides additional protection against moisture ingress and mechanical stress. Technical Specifications Parameter Specification Model 330101‑00‑13‑15‑12‑CN Probe Type 3300 XL 8 mm Proximity Probe Thread Type 3/8‑24 UNF Unthreaded Length 0.0 in Case Length 1.3 in Cable Length 1.5 m Connector Miniature coaxial ClickLoc Cable Type FluidLoc Measurement Type Static position and dynamic vibration System Compatibility 3300 XL Proximity Transducer System Weight 0.06 kg Dimensions 1.8 × 1.6 × 123 cm HS Code 8537101190 Origin USA Minimum Order 1 unit Product Status Active System TSI Performance Characteristics The probe generates a voltage output proportional to the distance between the probe tip and the target surface, enabling accurate gap and vibration measurements. Its compact geometry supports installation in restricted spaces while maintaining the durability and performance expected from the 3300 XL series. The 330101‑00‑13‑15‑12‑CN is suitable for hazardous‑area installations and provides stable long‑term performance in environments with high electromagnetic interference. Application Scenarios Turbine, compressor, and generator vibration monitoring Shaft displacement and axial position measurement Installations requiring compact probe geometry Predictive maintenance and machinery protection systems High‑EMI industrial environments requiring stable signal transmission FAQ Q: What makes this probe suitable for tight installations Its short case length and non‑armored design allow mounting in confined spaces without affecting measurement accuracy. Q: Is this probe compatible with standard 3300 XL extension cables Yes. It integrates seamlessly with the full 3300 XL transducer system. Q: Does the FluidLoc cable improve reliability Yes. It enhances moisture resistance and protects the cable from mechanical stress.
$200.00 $100.00
-
Bently Nevada Bently Nevada 330104‑00‑05‑05‑11‑05 3300 XL Proximity Probe
Overview The Bently Nevada 330104‑00‑05‑05‑11‑05 proximity probe is part of the 3300 XL 8 mm transducer family, engineered for high‑accuracy non‑contact measurement of shaft vibration and displacement in rotating machinery. Its armored construction and enhanced mechanical durability make it suitable for harsh industrial environments where long‑term reliability is essential. Design and Construction This probe features an M10×1 threaded housing and a molded PPS sensing tip. The PPS material provides increased encapsulation thickness around the coil, improving resistance to mechanical impact and environmental stress. The probe includes a 1.0‑meter FluidLoc cable equipped with an 11‑series miniature coaxial ClickLoc connector and a connector protector to maintain shielding integrity. The 330104‑00‑05‑05‑11‑05 is designed for seamless integration with the 3300 XL Proximitor Sensor and extension cables, forming a complete eddy‑current transducer system capable of delivering stable, repeatable measurements. Technical Specifications Parameter Specification Model 330104‑00‑05‑05‑11‑05 Probe Type 3300 XL 8 mm Proximity Probe Thread Type M10×1 Minimum Case Length 50 mm Cable Length 1.0 m (FluidLoc armored cable) Connector 11‑series miniature coaxial ClickLoc Tip Material PPS (Polyphenylene Sulfide) Measurement Type Static position and dynamic vibration System Compatibility 3300 XL Proximity Transducer System Backward Compatibility Non‑XL 5 mm and 8 mm probes (with proper bend radius) Certifications CSA, ATEX, IECEx Weight 0.55 kg Dimensions 20.5 × 22.4 × 3.3 cm HS Code 8537101190 Origin USA Minimum Order 1 unit Product Status Active System TSI Performance Characteristics The probe is part of the 3300 XL platform, which eliminates the need for matched calibration between probes, cables, and Proximitor sensors. This ensures consistent linearity, temperature stability, and measurement accuracy across the entire system. The armored cable design enhances mechanical protection, making the probe suitable for high‑vibration or physically exposed installations. When installed with the proper minimum bend radius, the probe can be interchanged with non‑XL 3300 series components without compromising performance. Application Scenarios Turbine and compressor vibration monitoring Shaft displacement and axial position measurement High‑vibration industrial environments requiring armored probes API‑compliant machinery protection systems Installations requiring backward compatibility with legacy 3300 components FAQ Q: Can this probe replace older 3300 series 5 mm or 8 mm probes Yes. It is backward‑compatible when installed with the correct cable bend radius. Q: What advantages does the PPS tip provide The thicker encapsulation improves durability and protects the sensing coil from mechanical damage. Q: Does the probe require matched calibration with its Proximitor sensor No. The 3300 XL system is designed for full interchangeability without matched component sets.
$200.00 $100.00
-
Bently Nevada Bently Nevada 330103‑00‑03‑05‑02‑05 3300 XL Proximitor Probe
Overview The Bently Nevada 330103‑00‑03‑05‑02‑05 proximitor probe is a compact 5 mm sensor designed for installations where standard 8 mm probes cannot be accommodated. As part of the 3300 XL proximity transducer system, it provides precise non‑contact measurement of shaft vibration and displacement in confined mounting locations. Design and Construction This probe features a short 30 mm case length and an unthreaded configuration, enabling installation in narrow side‑view or restricted‑access areas without compromising measurement accuracy. Its 0.5‑meter molded cable is terminated with a miniature coaxial ClickLoc connector, ensuring a secure, vibration‑resistant connection and maintaining shielding integrity. The 330103‑00‑03‑05‑02‑05 is engineered to deliver stable performance when paired with compatible extension cables and Proximitor sensors, forming a complete measurement chain suitable for high‑speed rotating machinery. Technical Specifications Parameter Specification Model 330103‑00‑03‑05‑02‑05 Probe Type 3300 XL 5 mm Proximitor Probe Case Length 30 mm Unthreaded Length 0 mm Cable Length 0.5 m Connector Miniature coaxial ClickLoc Measurement Type Static position and dynamic vibration System Compatibility 3300 Proximity Transducer System Weight 0.06 kg Dimensions 1.8 × 1.6 × 123 cm HS Code 8537101190 Origin USA Minimum Order 1 unit Product Status Active System TSI Performance Characteristics The probe generates a voltage output proportional to the distance between the probe tip and the target surface, enabling accurate gap and vibration measurements. Its compact geometry allows installation in tight spaces without reducing side‑view clearance or tip‑to‑tip spacing. The ClickLoc connector design supports rapid installation and minimizes downtime during maintenance, while the probe’s lightweight construction ensures ease of handling during system integration. Application Scenarios Machinery with limited mounting space Side‑view installations requiring compact probe geometry Turbine, compressor, and pump vibration monitoring Shaft displacement and axial position measurement Predictive maintenance and protection systems using 3300 XL components FAQ Q: Why choose a 5 mm probe instead of an 8 mm version The 5 mm design fits installations where space constraints prevent the use of standard 8 mm probes. Q: Is this probe compatible with standard 3300 XL extension cables Yes. It integrates seamlessly with the full 3300 XL transducer system. Q: Does the ClickLoc connector improve reliability Yes. It prevents accidental loosening and maintains shielding integrity in high‑vibration environments.
$200.00 $100.00
-
Bently Nevada Bently Nevada 330904-00-10-05-02-05 3300 NSv Proximity Probes
Overview The Bently Nevada 330904‑00‑10‑05‑02‑05 is a 0.5‑meter extension cable designed for use with the 3300 NSv proximity transducer system. Its compact length, rugged construction, and high‑integrity connectors make it suitable for installations where space is limited and signal reliability is critical. Design and Construction This cable uses gold‑plated brass ClickLoc connectors engineered to maintain secure mechanical engagement even in high‑vibration environments. The miniature coaxial design preserves signal fidelity across the full operating range of NSv probes, supporting accurate displacement and vibration measurements. The 330904‑00‑10‑05‑02‑05 is compatible with both armored and unarmored NSv probe configurations, including M8×1, M10×1, 1/4‑28, and 3/8‑24 threaded probe types. Its CableLoc retention system provides up to 220 N (50 lb) of pull strength, ensuring cable integrity in demanding industrial applications. Technical Specifications Parameter Specification Model 330904‑00‑10‑05‑02‑05 Cable Type 3300 NSv Extension Cable Length 0.5 m Connector Type Gold‑plated ClickLoc miniature coaxial Pull Strength 220 N (50 lb) Probe Compatibility NSv probes (armored/unarmored) Thread Compatibility M8×1, M10×1, 1/4‑28, 3/8‑24 Certifications CSA, ATEX, IECEx Weight 0.14 kg Dimensions 20.5 × 22.5 × 3.5 cm HS Code 8537101190 Origin USA Minimum Order 1 unit Product Status Active System TSI Performance Characteristics The cable maintains excellent electrical shielding and mechanical robustness, ensuring stable signal transmission in chemically aggressive or high‑vibration environments. When paired with NSv probes, it supports improved side‑view measurement characteristics, making it suitable for installations where direct axial access is limited. Bently Nevada recommends using connector protectors in wet or corrosive environments to prevent moisture ingress and maintain long‑term signal integrity. Application Scenarios Process compressors with limited installation space Machinery requiring reverse‑mount or side‑view probe configurations Hazardous‑area monitoring systems requiring certified components High‑vibration environments where cable retention strength is critical Chemical processing equipment exposed to corrosive atmospheres FAQ Q: Is this cable compatible with all NSv probe types Yes. It supports both armored and unarmored NSv probes across multiple thread configurations. Q: What makes the CableLoc design important It provides high pull‑strength retention, preventing accidental disconnection in high‑vibration environments. Q: Can this cable be used in hazardous areas Yes. It carries CSA, ATEX, and IECEx certifications for global hazardous‑area compliance.
$200.00 $100.00
-
Bently Nevada Bently Nevada 330103‑00‑05‑10‑02‑CN 3300 XL Proximity Probe
Overview The Bently Nevada 330103‑00‑05‑10‑02‑CN proximity probe is part of the 3300 XL 8 mm transducer family and is engineered for precise non‑contact measurement of shaft vibration and displacement. This model features a short 0.5‑meter cable configuration and is tailored for installations requiring compact probe assemblies, particularly in applications with limited mounting space. Design and Construction This probe uses an M10×1 threaded body and incorporates a 50 mm case length, making it suitable for confined installation areas. The cable is factory‑molded and terminated with a gold‑plated ClickLoc miniature coaxial connector, providing a secure, vibration‑resistant connection and maintaining shielding integrity. The 330103‑00‑05‑10‑02‑CN is designed to operate as part of the complete 3300 XL transducer system, working with compatible extension cables and Proximitor sensors to deliver accurate static and dynamic measurements. Technical Specifications Parameter Specification Model 330103‑00‑05‑10‑02‑CN Probe Type 3300 XL 8 mm Proximity Probe Thread Type M10×1 Case Length 50 mm Cable Length 0.5 m Connector Gold‑plated miniature coaxial ClickLoc Measurement Type Static position and dynamic vibration Certifications CSA, ATEX, IECEx Compliance API 670 System Compatibility 3300 XL Proximity Transducer System Weight 0.14 kg Dimensions 20.5 × 22.5 × 3.5 cm HS Code 8537101190 Origin USA Minimum Order 1 unit Product Status Active System TSI Performance Characteristics The probe generates a voltage output proportional to the distance between the probe tip and the target surface, enabling accurate gap and vibration measurements. Its compact design supports installations in restricted spaces while maintaining the durability and performance expected from the 3300 XL series. The 330103‑00‑05‑10‑02‑CN meets API 670 requirements and is certified for hazardous‑area use, making it suitable for critical applications in power generation, petrochemical processing, and heavy industrial environments. Application Scenarios Turbine and compressor vibration monitoring Shaft displacement and axial position measurement Keyphasor reference signal acquisition Speed measurement on rotating machinery Installations requiring short‑cable probe configurations FAQ Q: What makes this model suitable for compact installations Its 50 mm case length and 0.5 m cable allow mounting in tight spaces without compromising measurement accuracy. Q: Is this probe compatible with standard 3300 XL extension cables Yes. It is designed to operate with the full 3300 XL transducer system. Q: Does this model meet hazardous‑area requirements It carries CSA, ATEX, and IECEx approvals for use in classified environments.
$200.00 $100.00
-
Bently Nevada Bently Nevada 330104‑00‑22‑10‑02‑CN 3300 XL Proximity Probe
Overview The Bently Nevada 330104‑00‑22‑10‑02‑CN proximity probe is part of the 3300 XL 8 mm transducer series, engineered for precise non‑contact measurement of shaft vibration and displacement in high‑performance rotating machinery. Its armored construction and extended mechanical dimensions make it suitable for installations exposed to harsh operating conditions and elevated mechanical stress. Design and Construction This probe features an M10×1 threaded body with a long armored case section, providing enhanced protection against physical damage and cable fatigue. The minimum case length of 220 mm supports flexible mounting arrangements, particularly in large machinery where extended reach is required. A 1.0‑meter molded cable is terminated with a miniature coaxial ClickLoc connector, ensuring a secure, vibration‑resistant connection. The ClickLoc mechanism prevents accidental loosening and maintains shielding integrity, supporting stable signal transmission to the Proximitor sensor. System Integration The 330104‑00‑22‑10‑02‑CN is designed for seamless operation with the 3300 XL Proximitor Sensor. The sensor’s mechanical packaging supports both DIN‑rail and panel‑mount installations and maintains the same 4‑hole mounting footprint as earlier generations, simplifying system upgrades. The probe’s mounting base provides built‑in electrical isolation, eliminating the need for additional isolator plates and reducing installation complexity. Technical Specifications Parameter Specification Model 330104‑00‑22‑10‑02‑CN Probe Type 3300 XL 8 mm Proximity Probe Thread Type M10×1 Minimum Case Length 220 mm Cable Length 1.0 m Connector Miniature coaxial ClickLoc Measurement Type Static position and dynamic vibration RFI/EMI Immunity CE‑compliant, suitable for non‑metallic housings System Compatibility 3300 XL Proximity Transducer System Weight 0.55 kg Dimensions 20.5 × 22.4 × 3.3 cm HS Code 8537101190 Origin USA Minimum Order 1 unit Product Status Active System TSI Performance Characteristics The probe and its associated Proximitor sensor offer improved RFI/EMI immunity, allowing installation in fiberglass or other non‑metallic housings without requiring shielded conduit or metallic enclosures. This reduces installation cost while maintaining measurement accuracy. Full interchangeability across probes, cables, and sensors simplifies maintenance and eliminates the need for matched calibration. The armored design provides additional protection in high‑vibration or mechanically exposed environments. Application Scenarios Turbine and compressor vibration monitoring Shaft displacement and axial position measurement High‑vibration environments requiring armored probe assemblies Installations requiring CE‑compliant RFI/EMI performance Machinery protection systems using 3300 XL transducer components FAQ Q: Can this probe be installed in non‑metallic housings? A: Yes. Its enhanced RFI/EMI immunity allows installation in fiberglass housings without signal degradation. Q: Does the probe require a specific Proximitor sensor? A: It is designed for use with 3300 XL Proximitor sensors for optimal accuracy and linearity. Q: Is the probe interchangeable with older 3300 series components? A: Yes. The 3300 XL platform supports full interchangeability without matched calibration.
$200.00 $100.00
-
Bently Nevada Bently Nevada 330101‑00‑24‑10‑02‑00 3300 XL Proximity Probe
Overview The Bently Nevada 330101‑00‑24‑10‑02‑00 proximity probe is part of the 3300 XL 8 mm transducer family, designed for precise non‑contact measurement of shaft vibration and position in rotating machinery. Its mechanical robustness and stable electrical characteristics make it suitable for long‑term use in demanding industrial environments. Design and Construction This probe uses a 3/8‑24 UNF threaded body and includes a 1.0‑meter molded cable terminated with a miniature coaxial ClickLoc connector. The connector design prevents accidental loosening and maintains shielding integrity, ensuring consistent signal transmission to the Proximitor sensor. Compared with 5 mm probes, the 330101‑00‑24‑10‑02‑00 features a thicker encapsulation and reinforced case structure, improving durability in high‑vibration or mechanically exposed installations. The probe is available in armored and unarmored configurations, offering flexibility for different mounting and routing requirements. Technical Specifications Parameter Specification Model 330101‑00‑24‑10‑02‑00 Probe Type 3300 XL 8 mm Proximity Probe Thread Type 3/8‑24 UNF Cable Length 1.0 m Connector Miniature coaxial ClickLoc Measurement Type Static position and dynamic vibration System Compatibility 3300 Proximity Transducer System Weight 0.06 kg Dimensions 1.8 × 1.6 × 123 cm HS Code 8537101190 Origin USA Minimum Order 1 unit Product Status Active System TSI Performance Characteristics The probe produces a voltage output proportional to the distance between the probe tip and the target surface, enabling accurate displacement and vibration measurements. It is suitable for fluid‑film bearing machines and supports Keyphasor reference and speed measurement applications. The 330101‑00‑24‑10‑02‑00 is fully interchangeable with other 3300 XL components and backward‑compatible with non‑XL 5 mm and 8 mm probes, eliminating the need for matched calibration and simplifying system maintenance. Application Scenarios Radial vibration and shaft displacement monitoring Axial position measurement on turbines and compressors Keyphasor reference signal acquisition Speed measurement on rotating machinery High‑vibration industrial environments requiring durable probe construction FAQ Q: Is this probe compatible with older 3300 series components? A: Yes. It can be used with non‑XL 5 mm and 8 mm probes and cables without requiring matched calibration. Q: What type of machines typically use this probe? A: Turbines, compressors, pumps, and other rotating equipment with fluid‑film bearings. Q: Does the probe require a specific Proximitor sensor? A: For optimal accuracy, it should be paired with a 3300 XL Proximitor sensor.
$200.00 $100.00
-
Bently Nevada Bently Nevada 330104‑00‑08‑10‑01‑00 3300 XL 8 mm Probe
Overview The Bently Nevada 330104‑00‑08‑10‑01‑00 proximity probe is part of the 3300 XL 8 mm transducer family, designed for precise non‑contact measurement of shaft vibration and displacement. Its rugged construction and stable electrical characteristics make it suitable for continuous monitoring of rotating equipment in demanding industrial environments. Design and Construction This probe uses an M10×1 threaded body and includes an armored 1.0‑meter cable for enhanced protection in high‑vibration or mechanically exposed installations. The miniature coaxial ClickLoc connector ensures a secure, vibration‑resistant connection that maintains shielding integrity throughout the system. The 330104‑00‑08‑10‑01‑00 is engineered to deliver consistent linearity and measurement accuracy when paired with compatible 3300 XL Proximitor sensors. Its compact dimensions support installation in tight spaces while maintaining full system compatibility. Technical Specifications Parameter Specification Model 330104‑00‑08‑10‑01‑00 Probe Type 3300 XL 8 mm Proximity Probe Thread Type M10×1 Cable Length 1.0 m (armored) Connector Miniature coaxial ClickLoc with protector Measurement Type Static position and dynamic vibration System Compatibility 3300 Proximity Transducer System Weight 0.06 kg Dimensions 1.8 × 1.6 × 123 cm HS Code 8537101190 Origin USA Minimum Order 1 unit Product Status Active System TSI Performance Characteristics The probe generates a voltage output proportional to the distance between the probe tip and the target surface, enabling accurate displacement and vibration measurements. It is suitable for fluid‑film bearing machines and supports Keyphasor reference and speed measurement applications. The armored cable construction provides additional protection against mechanical damage, making the probe suitable for installations with elevated vibration levels or where cable routing is exposed to potential impact. Application Scenarios Radial vibration and shaft displacement monitoring Axial position measurement on turbines and compressors Keyphasor reference signal acquisition Speed measurement on rotating machinery High‑vibration industrial environments requiring armored cabling FAQ Q: Can this probe be used with older 3300 series components? A: It is designed for the 3300 XL system; compatibility with non‑XL components may be limited. Q: What type of machines typically use this probe? A: Turbines, compressors, pumps, and other rotating equipment with fluid‑film bearings. Q: Does the armored cable affect measurement accuracy? A: No. The armored design protects the cable without altering electrical performance.
$200.00 $100.00
-
Bently Nevada Bently Nevada 330104‑12‑20‑10‑02‑00 3300 XL Proximity Transducer
Overview The Bently Nevada 330104‑12‑20‑10‑02‑00 proximity transducer is part of the 3300 XL 8 mm series, designed for high‑accuracy non‑contact measurement of shaft vibration and displacement in critical rotating machinery. Its armored construction and extended mechanical dimensions make it suitable for installations exposed to harsh operating conditions, mechanical stress, and elevated temperatures. Mechanical Design This model incorporates an M10×1 threaded body with a 120 mm unthreaded section and a 200 mm armored case length. The probe housing is manufactured from AISI 303/304 stainless steel, providing corrosion resistance and long‑term durability. A Viton O‑ring is integrated into the design to maintain pressure integrity between the probe tip and the case, supporting reliable operation in environments where differential pressure is present. The probe tip is constructed from Polyphenylene Sulfide (PPS), a material selected for its mechanical strength and thermal stability. This ensures consistent measurement performance across the probe’s operating temperature range of −35°C to +85°C, with storage capability extending from −51°C to +100°C. Electrical Characteristics The 330104‑12‑20‑10‑02‑00 includes a 1.0‑meter cable terminated with a miniature coaxial ClickLoc connector. The connector design prevents accidental loosening and maintains shielding integrity, ensuring stable signal transmission to the associated Proximitor sensor. This probe is fully compatible with the 3300 XL transducer system and supports both static and dynamic measurements, including shaft position, radial vibration, and phase reference signals. Technical Specifications Parameter Specification Model 330104‑12‑20‑10‑02‑00 Probe Type 3300 XL 8 mm Proximity Transducer Thread Type M10×1 Unthreaded Length 120 mm Armored Case Length 200 mm Cable Length 1.0 m Connector Miniature coaxial ClickLoc Tip Material PPS (Polyphenylene Sulfide) Housing Material AISI 303/304 stainless steel Operating Temperature −35°C to +85°C Storage Temperature −51°C to +100°C Weight 0.14 kg Dimensions 20.5 × 22.5 × 3.5 cm HS Code 8537101190 Origin USA Minimum Order 1 unit Product Status Active Performance Characteristics The armored design provides enhanced protection against mechanical impact and cable damage, making the probe suitable for high‑vibration environments. Its extended unthreaded length allows flexible mounting configurations in turbines, compressors, and other large rotating assets. The probe is engineered to maintain linearity and accuracy across its full measurement range when used with 3300 XL Proximitor sensors. Its construction supports long‑term reliability in applications requiring continuous monitoring and API‑compliant performance. Application Scenarios Turbine and compressor vibration monitoring Shaft displacement and axial position measurement High‑vibration industrial environments requiring armored probes Installations with differential pressure across probe housings API 670‑compliant protection systems FAQ Q: Is this probe compatible with non‑XL 3300 series components? A: No. Due to its armored design and electrical characteristics, it is intended for use with 3300 XL system components. Q: What environments benefit most from the armored construction? A: High‑vibration, high‑temperature, or mechanically exposed installations where cable protection is critical. Q: Does the probe require special mounting hardware? A: It uses standard 3300 XL mounting configurations and does not require custom brackets.
$200.00 $100.00
You have seen 504 out of 553 products